Home

Context Navigation

parlist

Timestamp:: Oct 19, 2018 12:49:44 PM (6 years ago)
Author:: raasch
Comment:: --

Legend:

: Unmodified
: Added
: Removed
: Modified

doc/app/parlist

-                      v226
+                      v227
 || [../inipar#c_sedimentation c_sedimentation] [=#c] || ini || R || 2.0 || Courant number of sedimentation process
 || [../lsmpar#c_surface c_surface] || lsm || R || 20000.0 || Heat capacity of the surface (skin layer) per unit of area (in J/m²/K).
 || [../inipar#calc_soil_moisture_during_spinup calc_soil_moisture_during_spinup] || ini || L || .F. || Solve prognosic equation for soil moisture in the spinup phase.
+|| [../inipar#calc_soil_moisture_during_spinup calc_soil_moisture] \\ [../inipar#calc_soil_moisture_during_spinup  _during_spinup] || ini || L || .F. || Solve prognosic equation for soil moisture in the spinup phase.
 || [../inipar#call_psolver_at_all_substeps call_psolver_at] \\ [../inipar#call_psolver_at_all_substeps _all_substeps] || ini || L || .T. || Switch to steer the call of the pressure solver.
 || [../inipar#call_microphysics_at_all_substeps call_microphysics_at] \\ [../inipar#call_microphysics_at_all_substeps _all_substeps] || ini || L || .F. || Switch to steer the call of 2-moment microphysics.
 …
 || [../lsmpar#f_shortwave f_shortwave_incoming] [=#f] || lsm || R || depends on [../lsmpar#veg_type veg_type] || Fraction of the net shortwave radiation that is transmitted directly to the top soil layer.
 || [../lsmpar#field_capacity field_capacity] || lsm || R || depends on [../lsmpar#soil_type soil_type] || Soil moisture at field capacity (in m³/m³).
 || [../inipar#fft_method fft_method]|| ini || C*20 || 'system specific' || FFT-method to be used.
+|| [../inipar#fft_method fft_method] || ini || C*20 || 'system specific' || FFT-method to be used.
 || [../inipar#flux_input_mode flux_input_mode] || ini || C*40 || 'approximation-specific' || Parameter to choose the flux unit for input data.
 || [../inipar#flux_output_mode flux_output_mode] || ini || C*40 || 'approximation-specific' || Parameter to choose the flux unit for outputdata.
 …
 || [../inipar#km_damp_max km_damp_max] || ini || R || 0.5*(dx or dy) || Maximum diffusivity used for filtering the velocity field in the vicinity of the outflow (in m^2^/s).
 || [../lsmpar#l_vangenuchten l_vangenuchten] [=#l] || lsm || R || depends on [../lsmpar#soil_type soil_type] || Value of the coefficient l for the calculation of the hydraulic conductivity of soil in the parametrization after Van Genuchten.
 || [../inipar#lad_surface lad_surface]|| pcm || R || 0.0 || Surface value of the leaf area density (in m^2^/m^3^).
+|| [../inipar#lad_surface lad_surface] || pcm || R || 0.0 || Surface value of the leaf area density (in m^2^/m^3^).
 || [../inipar#lad_vertical_gradient lad_vertical_gradient] || pcm || R(10) || 10*0.0 || Gradient(s) of the leaf area density (in m^2^/m^4^).
 || [../inipar#lad_vertical_gradient_level lad_vertical_gradient] \\ [../inipar#lad_vertical_gradient_level _level] || pcm || R(10) || 10*0.0 || Height level above which the gradient of the leaf area density defined by [../inipar#lad_vertical_gradient lad_vertical_gradient] is effective (in m).
 …
 || [../nestpar#nesting_mode nesting_mode] || nest || C*7 || 'two-way' || Type of nesting mode.
 || [../radpar#net_radiation net_radiation] || rrtmg || R || 0.0 || Net radiation at the surface (in W/m^2).
 || [../d3par#netcdf_data_format netcdf_data_format]|| run || I ||2|| Data format for netCDF files.
+|| [../d3par#netcdf_data_format netcdf_data_format] || run || I ||2|| Data format for netCDF files.
 || [../d3par#netcdf_deflate netcdf_deflate] || run || I ||0|| Data compression level for NetCDF4/HDF5 format.
 || [../d3par#netcdf_precision netcdf_precision] || ini || C*20(10) || single precision for \\ all output quantities || Defines the accuracy of the netCDF output.
 …
 || [../inipar#q_vertical_gradient_level q_vertical_gradient] \\ [../inipar#q_vertical_gradient_level _level] || ini || R(10) || 10*0.0 || Height level above which the humidity gradient defined by [../inipar#q_vertical_gradient q_vertical_gradient] is effective (in m).
 || [../parpar#rm rm][=#r] || lpm || R(3) || 0.05E-6 || Parameters of initial aerosol spectrum.
 || [../inipar#radiation radiation]|| ini || L || .F. || Parameter to switch on longwave radiation cooling at cloud-tops.
+|| [../inipar#radiation radiation] || ini || L || .F. || Parameter to switch on longwave radiation cooling at cloud-tops.
 || [../radpar#radiation_scheme radiation_scheme] || rrtmg || C*10 || 'clear-sky' || Radiation scheme to be used.
 || [../parpar#radius radius] || lpm || R(10) || 0.0, 9* \\ 9999999.9 || Particle radius (in m).
 …
 || [../dvrpar#superelevation_x superelevation_x] || dvr || R || 1.0 || Superelevation factor for the horizontal (x) coordinate.
 || [../dvrpar#superelevation_y superelevation_y] || dvr || R || 1.0 || Superelevation factor for the horizontal (y) coordinate.
+|| [../oceanpar#surface_cooling_spinup_time surface_cooling] \\ [../oceanpar#surface_cooling_spinup_time _spinup_time] || ocean || R || 999999.9 || Time (in s) after which the surface heat flux is switched off.
 || [../inipar#surface_heatflux surface_heatflux] || ini || R || no prescribed \\ heatflux || Kinematic sensible heat flux at the bottom surface (in K m/s).
 || [../inipar#surface_pressure surface_pressure] || ini || R || 1013.25 || Atmospheric pressure at the surface (in hPa).
 …
 || [../inipar#uv_heights uv_heights] || ini || R(100) || 100 * 9999999.9 || Height levels for prescribed u,v-profiles (in m).
 || [../inipar#use_cmax use_cmax] || ini || L || .T. || Parameter to choose calculation method of the phase velocity in case of radiation boundary conditions.
 || [../inipar#use_free_convection_scaling use_free_convection_scaling] || ini || L || .F. || Parameter to switch on the use of the local free convection velocity scale.
+|| [../inipar#use_free_convection_scaling use_free_convection] \\ [../inipar#use_free_convection_scaling _scaling] || ini || L || .F. || Parameter to switch on the use of the local free convection velocity scale.
 || [../parpar#use_sgs_for_particles use_sgs_for_particles] || lpm || L || .F. || Use subgrid-scale velocities for particle advection.
 || [../inipar#use_subsidence_tendencies use_subsidence_tendencies] || ini || L || .F. || Parameter to choose the calculation method of subsidence in case of runs with large scale forcing.
+|| [../inipar#use_subsidence_tendencies use_subsidence] \\ [../inipar#use_subsidence_tendencies _tendencies] || ini || L || .F. || Parameter to choose the calculation method of subsidence in case of runs with large scale forcing.
 || [../inipar#use_surface_fluxes use_surface_fluxes] || ini || L || .F. || Parameter to steer the treatment of the subgrid-scale vertical fluxes within the diffusion terms at k=1 (bottom boundary).
 || [../inipar#use_top_fluxes use_top_fluxes] || ini || L || .F. || Parameter to steer the treatment of the subgrid-scale vertical fluxes within the diffusion terms at k=nz (top boundary).