Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 774

Last change on this file since 774 was 768, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.6 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[768]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 768 2011-10-14 06:57:15Z letzel $
	11	!
[768]	12	! 767 2011-10-14 06:39:12Z raasch
	13	! Output of given initial u,v-profiles
	14	!
[760]	15	! 759 2011-09-15 13:58:31Z raasch
	16	! output of maximum number of parallel io streams
	17	!
[708]	18	! 707 2011-03-29 11:39:40Z raasch
	19	! bc_lr/ns replaced by bc_lr/ns_cyc
	20	!
[668]	21	! 667 2010-12-23 12:06:00Z suehring/gryschka
	22	! Output of advection scheme.
	23	! Modified output of Prandtl-layer height.
	24	!
[581]	25	! 580 2010-10-05 13:59:11Z heinze
	26	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	27	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	28	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	29	!
[494]	30	! 493 2010-03-01 08:30:24Z raasch
	31	! NetCDF data output format extendend for NetCDF4/HDF5
	32	!
[482]	33	! 449 2010-02-02 11:23:59Z raasch
	34	! +large scale vertical motion (subsidence/ascent)
	35	! Bugfix: index problem concerning gradient_level indices removed
	36	!
[449]	37	! 410 2009-12-04 17:05:40Z letzel
	38	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	39	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	40	!
[392]	41	! 346 2009-07-06 10:13:41Z raasch
[328]	42	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	43	! Coupling with independent precursor runs.
[254]	44	! Output of messages replaced by message handling routine.
[336]	45	! Output of several additional dvr parameters
[240]	46	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	47	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	48	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	49	! topography_grid_convention moved from user_header
[292]	50	! small bugfix concerning 3d 64bit netcdf output format
[1]	51	!
[226]	52	! 206 2008-10-13 14:59:11Z raasch
	53	! Bugfix: error in zu index in case of section_xy = -1
	54	!
[200]	55	! 198 2008-09-17 08:55:28Z raasch
	56	! Format adjustments allowing output of larger revision numbers
	57	!
[198]	58	! 197 2008-09-16 15:29:03Z raasch
	59	! allow 100 spectra levels instead of 10 for consistency with
	60	! define_netcdf_header,
	61	! bugfix in the output of the characteristic levels of potential temperature,
	62	! geostrophic wind, scalar concentration, humidity and leaf area density,
	63	! output of turbulence recycling informations
	64	!
[139]	65	! 138 2007-11-28 10:03:58Z letzel
	66	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	67	! Allow two instead of one digit to specify isosurface and slicer variables.
	68	! Output of sorting frequency of particles
	69	!
[110]	70	! 108 2007-08-24 15:10:38Z letzel
	71	! Output of informations for coupled model runs (boundary conditions etc.)
	72	! + output of momentumfluxes at the top boundary
	73	! Rayleigh damping for ocean, e_init
	74	!
[98]	75	! 97 2007-06-21 08:23:15Z raasch
	76	! Adjustments for the ocean version.
	77	! use_pt_reference renamed use_reference
	78	!
[90]	79	! 87 2007-05-22 15:46:47Z raasch
	80	! Bugfix: output of use_upstream_for_tke
	81	!
[83]	82	! 82 2007-04-16 15:40:52Z raasch
	83	! Preprocessor strings for different linux clusters changed to "lc",
	84	! routine local_flush is used for buffer flushing
	85	!
[77]	86	! 76 2007-03-29 00:58:32Z raasch
	87	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	88	! output of the loop optimization method, moisture renamed humidity,
	89	! output of subversion revision number
	90	!
[39]	91	! 19 2007-02-23 04:53:48Z raasch
	92	! Output of scalar flux applied at top boundary
	93	!
[3]	94	! RCS Log replace by Id keyword, revision history cleaned up
	95	!
[1]	96	! Revision 1.63 2006/08/22 13:53:13 raasch
	97	! Output of dz_max
	98	!
	99	! Revision 1.1 1997/08/11 06:17:20 raasch
	100	! Initial revision
	101	!
	102	!
	103	! Description:
	104	! ------------
	105	! Writing a header with all important informations about the actual run.
	106	! This subroutine is called three times, two times at the beginning
	107	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	108	! end of the run, then writing additional information about CPU-usage on file
	109	! header.
[411]	110	!-----------------------------------------------------------------------------!
[1]	111
	112	USE arrays_3d
	113	USE control_parameters
	114	USE cloud_parameters
	115	USE cpulog
	116	USE dvrp_variables
	117	USE grid_variables
	118	USE indices
	119	USE model_1d
	120	USE particle_attributes
	121	USE pegrid
[411]	122	USE subsidence_mod
[1]	123	USE spectrum
	124
	125	IMPLICIT NONE
	126
	127	CHARACTER (LEN=1) :: prec
	128	CHARACTER (LEN=2) :: do2d_mode
	129	CHARACTER (LEN=5) :: section_chr
	130	CHARACTER (LEN=9) :: time_to_string
	131	CHARACTER (LEN=10) :: coor_chr, host_chr
	132	CHARACTER (LEN=16) :: begin_chr
[200]	133	CHARACTER (LEN=23) :: ver_rev
[1]	134	CHARACTER (LEN=40) :: output_format
[167]	135	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	136	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	137	domask_chr, run_classification
[167]	138	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	139	temperatures, ugcomponent, vgcomponent
[1]	140	CHARACTER (LEN=85) :: roben, runten
	141
[410]	142	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	143
	144	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	145	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	146	REAL :: cpuseconds_per_simulated_second
	147
	148	!
	149	!-- Open the output file. At the end of the simulation, output is directed
	150	!-- to unit 19.
	151	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	152	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	153	io = 15 ! header output on file RUN_CONTROL
	154	ELSE
	155	io = 19 ! header output on file HEADER
	156	ENDIF
	157	CALL check_open( io )
	158
	159	!
	160	!-- At the end of the run, output file (HEADER) will be rewritten with
	161	!-- new informations
	162	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	163
	164	!
	165	!-- Determine kind of model run
	166	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	167	run_classification = '3D - restart run'
[328]	168	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	169	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	170	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	171	run_classification = '3D - run without 1D - prerun'
[197]	172	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	173	run_classification = '3D - run with 1D - prerun'
[197]	174	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	175	run_classification = '3D - run initialized by user'
[1]	176	ELSE
[254]	177	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	178	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	179	ENDIF
[97]	180	IF ( ocean ) THEN
	181	run_classification = 'ocean - ' // run_classification
	182	ELSE
	183	run_classification = 'atmosphere - ' // run_classification
	184	ENDIF
[1]	185
	186	!
	187	!-- Run-identification, date, time, host
	188	host_chr = host(1:10)
[75]	189	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	190	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	191	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	192	#if defined( __mpi2 )
	193	mpi_type = 2
	194	#else
	195	mpi_type = 1
	196	#endif
	197	WRITE ( io, 101 ) mpi_type, coupling_mode
	198	ENDIF
[102]	199	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	200	ADJUSTR( host_chr )
[1]	201	#if defined( __parallel )
	202	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	203	char1 = 'calculated'
	204	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	205	host(1:2) == 'lc' ) .AND. &
	206	npex == -1 .AND. pdims(2) == 1 ) THEN
	207	char1 = 'forced'
	208	ELSE
	209	char1 = 'predefined'
	210	ENDIF
	211	IF ( threads_per_task == 1 ) THEN
[102]	212	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	213	ELSE
[102]	214	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	215	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	216	ENDIF
	217	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	218	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	219	npex == -1 .AND. pdims(2) == 1 ) &
	220	THEN
[102]	221	WRITE ( io, 106 )
[1]	222	ELSEIF ( pdims(2) == 1 ) THEN
[102]	223	WRITE ( io, 107 ) 'x'
[1]	224	ELSEIF ( pdims(1) == 1 ) THEN
[102]	225	WRITE ( io, 107 ) 'y'
[1]	226	ENDIF
[102]	227	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	228	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	229	WRITE ( io, 108 ) maximum_parallel_io_streams
	230	ENDIF
[1]	231	#endif
	232	WRITE ( io, 99 )
	233
	234	!
	235	!-- Numerical schemes
	236	WRITE ( io, 110 )
	237	IF ( psolver(1:7) == 'poisfft' ) THEN
	238	WRITE ( io, 111 ) TRIM( fft_method )
	239	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	240	ELSEIF ( psolver == 'sor' ) THEN
	241	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	242	ELSEIF ( psolver == 'multigrid' ) THEN
	243	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	244	IF ( mg_cycles == -1 ) THEN
	245	WRITE ( io, 140 ) residual_limit
	246	ELSE
	247	WRITE ( io, 141 ) mg_cycles
	248	ENDIF
	249	IF ( mg_switch_to_pe0_level == 0 ) THEN
	250	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	251	nzt_mg(1)
[197]	252	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	253	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	254	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	255	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	256	nzt_mg(mg_switch_to_pe0_level), &
	257	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	258	nzt_mg(1)
	259	ENDIF
	260	ENDIF
	261	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	262	THEN
	263	WRITE ( io, 142 )
	264	ENDIF
	265
	266	IF ( momentum_advec == 'pw-scheme' ) THEN
	267	WRITE ( io, 113 )
[667]	268	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	269	WRITE ( io, 503 )
	270	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	271	WRITE ( io, 114 )
	272	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	273	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	274	overshoot_limit_w /= 0.0 ) THEN
	275	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	276	overshoot_limit_w
	277	ENDIF
	278	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	279	ups_limit_w /= 0.0 ) &
	280	THEN
	281	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	282	ENDIF
	283	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	284	ENDIF
	285	IF ( scalar_advec == 'pw-scheme' ) THEN
	286	WRITE ( io, 116 )
[667]	287	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	288	WRITE ( io, 504 )
[1]	289	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	290	WRITE ( io, 117 )
	291	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	292	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	293	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	294	ENDIF
	295	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	296	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	297	ENDIF
	298	ELSE
	299	WRITE ( io, 118 )
	300	ENDIF
[63]	301
	302	WRITE ( io, 139 ) TRIM( loop_optimization )
	303
[1]	304	IF ( galilei_transformation ) THEN
	305	IF ( use_ug_for_galilei_tr ) THEN
	306	char1 = 'geostrophic wind'
	307	ELSE
	308	char1 = 'mean wind in model domain'
	309	ENDIF
	310	IF ( simulated_time_at_begin == simulated_time ) THEN
	311	char2 = 'at the start of the run'
	312	ELSE
	313	char2 = 'at the end of the run'
	314	ENDIF
	315	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	316	advected_distance_x/1000.0, advected_distance_y/1000.0
	317	ENDIF
	318	IF ( timestep_scheme == 'leapfrog' ) THEN
	319	WRITE ( io, 120 )
	320	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	321	WRITE ( io, 121 )
	322	ELSE
	323	WRITE ( io, 122 ) timestep_scheme
	324	ENDIF
[87]	325	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	326	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	327	IF ( .NOT. ocean ) THEN
	328	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	329	rayleigh_damping_factor
	330	ELSE
	331	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	332	rayleigh_damping_factor
	333	ENDIF
[1]	334	ENDIF
[75]	335	IF ( humidity ) THEN
[1]	336	IF ( .NOT. cloud_physics ) THEN
	337	WRITE ( io, 129 )
	338	ELSE
	339	WRITE ( io, 130 )
	340	WRITE ( io, 131 )
	341	IF ( radiation ) WRITE ( io, 132 )
	342	IF ( precipitation ) WRITE ( io, 133 )
	343	ENDIF
	344	ENDIF
	345	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	346	IF ( conserve_volume_flow ) THEN
[241]	347	WRITE ( io, 150 ) conserve_volume_flow_mode
	348	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	349	WRITE ( io, 151 ) u_bulk, v_bulk
	350	ENDIF
[240]	351	ELSEIF ( dp_external ) THEN
	352	IF ( dp_smooth ) THEN
[241]	353	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	354	ELSE
[241]	355	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	356	ENDIF
	357	ENDIF
[411]	358	IF ( large_scale_subsidence ) THEN
	359	WRITE ( io, 153 )
	360	WRITE ( io, 154 )
	361	ENDIF
[1]	362	WRITE ( io, 99 )
	363
	364	!
	365	!-- Runtime and timestep informations
	366	WRITE ( io, 200 )
	367	IF ( .NOT. dt_fixed ) THEN
	368	WRITE ( io, 201 ) dt_max, cfl_factor
	369	ELSE
	370	WRITE ( io, 202 ) dt
	371	ENDIF
	372	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	373
	374	IF ( time_restart /= 9999999.9 .AND. &
	375	simulated_time_at_begin == simulated_time ) THEN
	376	IF ( dt_restart == 9999999.9 ) THEN
	377	WRITE ( io, 204 ) ' Restart at: ',time_restart
	378	ELSE
	379	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	380	ENDIF
	381	ENDIF
	382
	383	IF ( simulated_time_at_begin /= simulated_time ) THEN
	384	i = MAX ( log_point_s(10)%counts, 1 )
	385	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	386	cpuseconds_per_simulated_second = 0.0
	387	ELSE
	388	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	389	( simulated_time - &
	390	simulated_time_at_begin )
	391	ENDIF
	392	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	393	log_point_s(10)%sum / REAL( i ), &
	394	cpuseconds_per_simulated_second
	395	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	396	IF ( dt_restart == 9999999.9 ) THEN
	397	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	398	ELSE
	399	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	400	ENDIF
	401	ENDIF
	402	ENDIF
	403
	404	!
[291]	405	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	406	!-- and ocean are used. In this case, coupling_start_time defines the time
	407	!-- when the coupling is switched on.
	408	IF ( coupling_start_time /= 0.0 ) THEN
	409	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	410	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	411	ELSE
	412	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	413	'precursor runs'
	414	ENDIF
	415	WRITE ( io, 207 ) char1, coupling_start_time
	416	ENDIF
	417
	418	!
[1]	419	!-- Computational grid
[94]	420	IF ( .NOT. ocean ) THEN
	421	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	422	IF ( dz_stretch_level_index < nzt+1 ) THEN
	423	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	424	dz_stretch_factor, dz_max
	425	ENDIF
	426	ELSE
	427	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	428	IF ( dz_stretch_level_index > 0 ) THEN
	429	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	430	dz_stretch_factor, dz_max
	431	ENDIF
[1]	432	ENDIF
	433	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	434	MIN( nnz+2, nzt+2 )
[76]	435	IF ( numprocs > 1 ) THEN
	436	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	437	WRITE ( io, 255 )
	438	ELSE
	439	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	440	ENDIF
[1]	441	ENDIF
	442	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	443
	444	!
	445	!-- Topography
	446	WRITE ( io, 270 ) topography
	447	SELECT CASE ( TRIM( topography ) )
	448
	449	CASE ( 'flat' )
	450	! no actions necessary
	451
	452	CASE ( 'single_building' )
	453	blx = INT( building_length_x / dx )
	454	bly = INT( building_length_y / dy )
	455	bh = INT( building_height / dz )
	456
	457	IF ( building_wall_left == 9999999.9 ) THEN
	458	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	459	ENDIF
	460	bxl = INT ( building_wall_left / dx + 0.5 )
	461	bxr = bxl + blx
	462
	463	IF ( building_wall_south == 9999999.9 ) THEN
	464	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	465	ENDIF
	466	bys = INT ( building_wall_south / dy + 0.5 )
	467	byn = bys + bly
	468
	469	WRITE ( io, 271 ) building_length_x, building_length_y, &
	470	building_height, bxl, bxr, bys, byn
	471
[240]	472	CASE ( 'single_street_canyon' )
	473	ch = NINT( canyon_height / dz )
	474	IF ( canyon_width_x /= 9999999.9 ) THEN
	475	!
	476	!-- Street canyon in y direction
	477	cwx = NINT( canyon_width_x / dx )
	478	IF ( canyon_wall_left == 9999999.9 ) THEN
	479	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	480	ENDIF
	481	cxl = NINT( canyon_wall_left / dx )
	482	cxr = cxl + cwx
	483	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	484
	485	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	486	!
	487	!-- Street canyon in x direction
	488	cwy = NINT( canyon_width_y / dy )
	489	IF ( canyon_wall_south == 9999999.9 ) THEN
	490	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	491	ENDIF
	492	cys = NINT( canyon_wall_south / dy )
	493	cyn = cys + cwy
	494	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	495	ENDIF
	496
[1]	497	END SELECT
	498
[256]	499	IF ( TRIM( topography ) /= 'flat' ) THEN
	500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	501	IF ( TRIM( topography ) == 'single_building' .OR. &
	502	TRIM( topography ) == 'single_street_canyon' ) THEN
	503	WRITE ( io, 278 )
	504	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	505	WRITE ( io, 279 )
	506	ENDIF
	507	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	508	WRITE ( io, 278 )
	509	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	510	WRITE ( io, 279 )
	511	ENDIF
	512	ENDIF
	513
[138]	514	IF ( plant_canopy ) THEN
	515
	516	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	517	IF ( passive_scalar ) THEN
	518	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	519	leaf_surface_concentration
	520	ENDIF
[138]	521
[1]	522	!
[153]	523	!-- Heat flux at the top of vegetation
	524	WRITE ( io, 282 ) cthf
	525
	526	!
[138]	527	!-- Leaf area density profile
	528	!-- Building output strings, starting with surface value
	529	WRITE ( learde, '(F6.2)' ) lad_surface
	530	gradients = '------'
	531	slices = ' 0'
	532	coordinates = ' 0.0'
	533	i = 1
	534	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	535
	536	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	537	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	538
	539	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	540	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	541
	542	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	543	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	544
	545	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	546	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	547
	548	i = i + 1
	549	ENDDO
	550
[153]	551	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	552	TRIM( gradients ), TRIM( slices )
	553
	554	ENDIF
	555
	556	!
[1]	557	!-- Boundary conditions
	558	IF ( ibc_p_b == 0 ) THEN
	559	runten = 'p(0) = 0 \|'
	560	ELSEIF ( ibc_p_b == 1 ) THEN
	561	runten = 'p(0) = p(1) \|'
	562	ELSE
	563	runten = 'p(0) = p(1) +R\|'
	564	ENDIF
	565	IF ( ibc_p_t == 0 ) THEN
	566	roben = 'p(nzt+1) = 0 \|'
	567	ELSE
	568	roben = 'p(nzt+1) = p(nzt) \|'
	569	ENDIF
	570
	571	IF ( ibc_uv_b == 0 ) THEN
	572	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	573	ELSE
	574	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	575	ENDIF
[132]	576	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	577	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	578	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	579	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	580	ELSE
	581	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	582	ENDIF
	583
	584	IF ( ibc_pt_b == 0 ) THEN
	585	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	586	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	587	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	588	ELSEIF ( ibc_pt_b == 2 ) THEN
	589	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	590	ENDIF
	591	IF ( ibc_pt_t == 0 ) THEN
[19]	592	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	593	ELSEIF( ibc_pt_t == 1 ) THEN
	594	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	595	ELSEIF( ibc_pt_t == 2 ) THEN
	596	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	597
[1]	598	ENDIF
	599
	600	WRITE ( io, 300 ) runten, roben
	601
	602	IF ( .NOT. constant_diffusion ) THEN
	603	IF ( ibc_e_b == 1 ) THEN
	604	runten = 'e(0) = e(1)'
	605	ELSE
	606	runten = 'e(0) = e(1) = (u/0.1)*2'
	607	ENDIF
	608	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	609
[97]	610	WRITE ( io, 301 ) 'e', runten, roben
[1]	611
	612	ENDIF
	613
[97]	614	IF ( ocean ) THEN
	615	runten = 'sa(0) = sa(1)'
	616	IF ( ibc_sa_t == 0 ) THEN
	617	roben = 'sa(nzt+1) = sa_surface'
[1]	618	ELSE
[97]	619	roben = 'sa(nzt+1) = sa(nzt)'
[1]	620	ENDIF
[97]	621	WRITE ( io, 301 ) 'sa', runten, roben
	622	ENDIF
[1]	623
[97]	624	IF ( humidity ) THEN
	625	IF ( ibc_q_b == 0 ) THEN
	626	runten = 'q(0) = q_surface'
	627	ELSE
	628	runten = 'q(0) = q(1)'
	629	ENDIF
	630	IF ( ibc_q_t == 0 ) THEN
	631	roben = 'q(nzt) = q_top'
	632	ELSE
	633	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	634	ENDIF
	635	WRITE ( io, 301 ) 'q', runten, roben
	636	ENDIF
[1]	637
[97]	638	IF ( passive_scalar ) THEN
	639	IF ( ibc_q_b == 0 ) THEN
	640	runten = 's(0) = s_surface'
	641	ELSE
	642	runten = 's(0) = s(1)'
	643	ENDIF
	644	IF ( ibc_q_t == 0 ) THEN
	645	roben = 's(nzt) = s_top'
	646	ELSE
	647	roben = 's(nzt) = s(nzt-1) + ds/dz'
	648	ENDIF
	649	WRITE ( io, 301 ) 's', runten, roben
[1]	650	ENDIF
	651
	652	IF ( use_surface_fluxes ) THEN
	653	WRITE ( io, 303 )
	654	IF ( constant_heatflux ) THEN
	655	WRITE ( io, 306 ) surface_heatflux
	656	IF ( random_heatflux ) WRITE ( io, 307 )
	657	ENDIF
[75]	658	IF ( humidity .AND. constant_waterflux ) THEN
[1]	659	WRITE ( io, 311 ) surface_waterflux
	660	ENDIF
	661	IF ( passive_scalar .AND. constant_waterflux ) THEN
	662	WRITE ( io, 313 ) surface_waterflux
	663	ENDIF
	664	ENDIF
	665
[19]	666	IF ( use_top_fluxes ) THEN
	667	WRITE ( io, 304 )
[102]	668	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	669	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	670	IF ( constant_top_heatflux ) THEN
	671	WRITE ( io, 306 ) top_heatflux
	672	ENDIF
	673	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	674	WRITE ( io, 316 )
[19]	675	ENDIF
[97]	676	IF ( ocean .AND. constant_top_salinityflux ) THEN
	677	WRITE ( io, 309 ) top_salinityflux
	678	ENDIF
[75]	679	IF ( humidity .OR. passive_scalar ) THEN
[19]	680	WRITE ( io, 315 )
	681	ENDIF
	682	ENDIF
	683
[1]	684	IF ( prandtl_layer ) THEN
[667]	685	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	686	rif_min, rif_max
[1]	687	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	688	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	689	WRITE ( io, 312 )
	690	ENDIF
	691	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	692	WRITE ( io, 314 )
	693	ENDIF
	694	ELSE
	695	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	696	WRITE ( io, 310 ) rif_min, rif_max
	697	ENDIF
	698	ENDIF
	699
	700	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	701	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	702	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	703	IF ( turbulent_inflow ) THEN
	704	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	705	inflow_damping_height, inflow_damping_width
	706	ENDIF
[1]	707	ENDIF
	708
	709	!
	710	!-- Listing of 1D-profiles
[151]	711	WRITE ( io, 325 ) dt_dopr_listing
[1]	712	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	713	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	714	ENDIF
	715
	716	!
	717	!-- DATA output
	718	WRITE ( io, 330 )
	719	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	720	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	721	ENDIF
	722
	723	!
	724	!-- 1D-profiles
[346]	725	dopr_chr = 'Profile:'
[1]	726	IF ( dopr_n /= 0 ) THEN
	727	WRITE ( io, 331 )
	728
	729	output_format = ''
	730	IF ( netcdf_output ) THEN
[493]	731	IF ( netcdf_data_format == 1 ) THEN
	732	output_format = 'NetCDF classic'
[1]	733	ELSE
[493]	734	output_format = 'NetCDF 64bit offset'
[1]	735	ENDIF
	736	ENDIF
	737	IF ( profil_output ) THEN
	738	IF ( netcdf_output ) THEN
	739	output_format = TRIM( output_format ) // ' and profil'
	740	ELSE
	741	output_format = 'profil'
	742	ENDIF
	743	ENDIF
[292]	744	WRITE ( io, 344 ) output_format
[1]	745
	746	DO i = 1, dopr_n
	747	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	748	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	749	WRITE ( io, 332 ) dopr_chr
	750	dopr_chr = ' :'
	751	ENDIF
	752	ENDDO
	753
	754	IF ( dopr_chr /= '' ) THEN
	755	WRITE ( io, 332 ) dopr_chr
	756	ENDIF
	757	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	758	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	759	ENDIF
	760
	761	!
	762	!-- 2D-arrays
	763	DO av = 0, 1
	764
	765	i = 1
	766	do2d_xy = ''
	767	do2d_xz = ''
	768	do2d_yz = ''
	769	DO WHILE ( do2d(av,i) /= ' ' )
	770
	771	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	772	do2d_mode = do2d(av,i)(l-1:l)
	773
	774	SELECT CASE ( do2d_mode )
	775	CASE ( 'xy' )
	776	ll = LEN_TRIM( do2d_xy )
	777	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	778	CASE ( 'xz' )
	779	ll = LEN_TRIM( do2d_xz )
	780	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	781	CASE ( 'yz' )
	782	ll = LEN_TRIM( do2d_yz )
	783	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	784	END SELECT
	785
	786	i = i + 1
	787
	788	ENDDO
	789
	790	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	791	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	792	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	793	( netcdf_output .OR. iso2d_output ) ) THEN
	794
	795	IF ( av == 0 ) THEN
	796	WRITE ( io, 334 ) ''
	797	ELSE
	798	WRITE ( io, 334 ) '(time-averaged)'
	799	ENDIF
	800
	801	IF ( do2d_at_begin ) THEN
	802	begin_chr = 'and at the start'
	803	ELSE
	804	begin_chr = ''
	805	ENDIF
	806
	807	output_format = ''
	808	IF ( netcdf_output ) THEN
[493]	809	IF ( netcdf_data_format == 1 ) THEN
	810	output_format = 'NetCDF classic'
	811	ELSEIF ( netcdf_data_format == 2 ) THEN
	812	output_format = 'NetCDF 64bit offset'
	813	ELSEIF ( netcdf_data_format == 3 ) THEN
	814	output_format = 'NetCDF4/HDF5'
	815	ELSEIF ( netcdf_data_format == 4 ) THEN
	816	output_format = 'NetCDF4/HDF5 clasic'
[1]	817	ENDIF
	818	ENDIF
	819	IF ( iso2d_output ) THEN
	820	IF ( netcdf_output ) THEN
	821	output_format = TRIM( output_format ) // ' and iso2d'
	822	ELSE
	823	output_format = 'iso2d'
	824	ENDIF
	825	ENDIF
[292]	826	WRITE ( io, 344 ) output_format
[1]	827
	828	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	829	i = 1
	830	slices = '/'
	831	coordinates = '/'
	832	!
	833	!-- Building strings with index and coordinate informations of the
	834	!-- slices
	835	DO WHILE ( section(i,1) /= -9999 )
	836
	837	WRITE (section_chr,'(I5)') section(i,1)
	838	section_chr = ADJUSTL( section_chr )
	839	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	840
[206]	841	IF ( section(i,1) == -1 ) THEN
	842	WRITE (coor_chr,'(F10.1)') -1.0
	843	ELSE
	844	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	845	ENDIF
[1]	846	coor_chr = ADJUSTL( coor_chr )
	847	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	848
	849	i = i + 1
	850	ENDDO
	851	IF ( av == 0 ) THEN
	852	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	853	TRIM( begin_chr ), 'k', TRIM( slices ), &
	854	TRIM( coordinates )
	855	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	856	WRITE ( io, 339 ) skip_time_do2d_xy
	857	ENDIF
	858	ELSE
	859	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	860	TRIM( begin_chr ), averaging_interval, &
	861	dt_averaging_input, 'k', TRIM( slices ), &
	862	TRIM( coordinates )
	863	IF ( skip_time_data_output_av /= 0.0 ) THEN
	864	WRITE ( io, 339 ) skip_time_data_output_av
	865	ENDIF
	866	ENDIF
	867
	868	ENDIF
	869
	870	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	871	i = 1
	872	slices = '/'
	873	coordinates = '/'
	874	!
	875	!-- Building strings with index and coordinate informations of the
	876	!-- slices
	877	DO WHILE ( section(i,2) /= -9999 )
	878
	879	WRITE (section_chr,'(I5)') section(i,2)
	880	section_chr = ADJUSTL( section_chr )
	881	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	882
	883	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	884	coor_chr = ADJUSTL( coor_chr )
	885	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	886
	887	i = i + 1
	888	ENDDO
	889	IF ( av == 0 ) THEN
	890	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	891	TRIM( begin_chr ), 'j', TRIM( slices ), &
	892	TRIM( coordinates )
	893	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	894	WRITE ( io, 339 ) skip_time_do2d_xz
	895	ENDIF
	896	ELSE
	897	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	898	TRIM( begin_chr ), averaging_interval, &
	899	dt_averaging_input, 'j', TRIM( slices ), &
	900	TRIM( coordinates )
	901	IF ( skip_time_data_output_av /= 0.0 ) THEN
	902	WRITE ( io, 339 ) skip_time_data_output_av
	903	ENDIF
	904	ENDIF
	905	ENDIF
	906
	907	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	908	i = 1
	909	slices = '/'
	910	coordinates = '/'
	911	!
	912	!-- Building strings with index and coordinate informations of the
	913	!-- slices
	914	DO WHILE ( section(i,3) /= -9999 )
	915
	916	WRITE (section_chr,'(I5)') section(i,3)
	917	section_chr = ADJUSTL( section_chr )
	918	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	919
	920	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	921	coor_chr = ADJUSTL( coor_chr )
	922	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	923
	924	i = i + 1
	925	ENDDO
	926	IF ( av == 0 ) THEN
	927	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	928	TRIM( begin_chr ), 'i', TRIM( slices ), &
	929	TRIM( coordinates )
	930	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	931	WRITE ( io, 339 ) skip_time_do2d_yz
	932	ENDIF
	933	ELSE
	934	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	935	TRIM( begin_chr ), averaging_interval, &
	936	dt_averaging_input, 'i', TRIM( slices ), &
	937	TRIM( coordinates )
	938	IF ( skip_time_data_output_av /= 0.0 ) THEN
	939	WRITE ( io, 339 ) skip_time_data_output_av
	940	ENDIF
	941	ENDIF
	942	ENDIF
	943
	944	ENDIF
	945
	946	ENDDO
	947
	948	!
	949	!-- 3d-arrays
	950	DO av = 0, 1
	951
	952	i = 1
	953	do3d_chr = ''
	954	DO WHILE ( do3d(av,i) /= ' ' )
	955
	956	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	957	i = i + 1
	958
	959	ENDDO
	960
	961	IF ( do3d_chr /= '' ) THEN
	962	IF ( av == 0 ) THEN
	963	WRITE ( io, 336 ) ''
	964	ELSE
	965	WRITE ( io, 336 ) '(time-averaged)'
	966	ENDIF
	967
	968	output_format = ''
	969	IF ( netcdf_output ) THEN
[493]	970	IF ( netcdf_data_format == 1 ) THEN
	971	output_format = 'NetCDF classic'
	972	ELSEIF ( netcdf_data_format == 2 ) THEN
	973	output_format = 'NetCDF 64bit offset'
	974	ELSEIF ( netcdf_data_format == 3 ) THEN
	975	output_format = 'NetCDF4/HDF5'
	976	ELSEIF ( netcdf_data_format == 4 ) THEN
	977	output_format = 'NetCDF4/HDF5 clasic'
[1]	978	ENDIF
	979	ENDIF
	980	IF ( avs_output ) THEN
	981	IF ( netcdf_output ) THEN
	982	output_format = TRIM( output_format ) // ' and avs'
	983	ELSE
	984	output_format = 'avs'
	985	ENDIF
	986	ENDIF
[292]	987	WRITE ( io, 344 ) output_format
[1]	988
	989	IF ( do3d_at_begin ) THEN
	990	begin_chr = 'and at the start'
	991	ELSE
	992	begin_chr = ''
	993	ENDIF
	994	IF ( av == 0 ) THEN
	995	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	996	zu(nz_do3d), nz_do3d
	997	ELSE
	998	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	999	TRIM( begin_chr ), averaging_interval, &
	1000	dt_averaging_input, zu(nz_do3d), nz_do3d
	1001	ENDIF
	1002
	1003	IF ( do3d_compress ) THEN
	1004	do3d_chr = ''
	1005	i = 1
	1006	DO WHILE ( do3d(av,i) /= ' ' )
	1007
	1008	SELECT CASE ( do3d(av,i) )
	1009	CASE ( 'u' )
	1010	j = 1
	1011	CASE ( 'v' )
	1012	j = 2
	1013	CASE ( 'w' )
	1014	j = 3
	1015	CASE ( 'p' )
	1016	j = 4
	1017	CASE ( 'pt' )
	1018	j = 5
	1019	END SELECT
	1020	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1021	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1022	':' // prec // ','
	1023	i = i + 1
	1024
	1025	ENDDO
	1026	WRITE ( io, 338 ) do3d_chr
	1027
	1028	ENDIF
	1029
	1030	IF ( av == 0 ) THEN
	1031	IF ( skip_time_do3d /= 0.0 ) THEN
	1032	WRITE ( io, 339 ) skip_time_do3d
	1033	ENDIF
	1034	ELSE
	1035	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1036	WRITE ( io, 339 ) skip_time_data_output_av
	1037	ENDIF
	1038	ENDIF
	1039
	1040	ENDIF
	1041
	1042	ENDDO
	1043
	1044	!
[410]	1045	!-- masked arrays
	1046	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1047	mask_scale_x, mask_scale_y, mask_scale_z
	1048	DO mid = 1, masks
	1049	DO av = 0, 1
	1050
	1051	i = 1
	1052	domask_chr = ''
	1053	DO WHILE ( domask(mid,av,i) /= ' ' )
	1054	domask_chr = TRIM( domask_chr ) // ' ' // &
	1055	TRIM( domask(mid,av,i) ) // ','
	1056	i = i + 1
	1057	ENDDO
	1058
	1059	IF ( domask_chr /= '' ) THEN
	1060	IF ( av == 0 ) THEN
	1061	WRITE ( io, 346 ) '', mid
	1062	ELSE
	1063	WRITE ( io, 346 ) ' (time-averaged)', mid
	1064	ENDIF
	1065
	1066	output_format = ''
	1067	IF ( netcdf_output ) THEN
[493]	1068	IF ( netcdf_data_format == 1 ) THEN
	1069	output_format = 'NetCDF classic'
	1070	ELSEIF ( netcdf_data_format == 2 ) THEN
	1071	output_format = 'NetCDF 64bit offset'
	1072	ELSEIF ( netcdf_data_format == 3 ) THEN
	1073	output_format = 'NetCDF4/HDF5'
	1074	ELSEIF ( netcdf_data_format == 4 ) THEN
	1075	output_format = 'NetCDF4/HDF5 clasic'
	1076	ENDIF
[410]	1077	ENDIF
	1078	WRITE ( io, 344 ) output_format
	1079
	1080	IF ( av == 0 ) THEN
	1081	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1082	ELSE
	1083	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1084	averaging_interval, dt_averaging_input
	1085	ENDIF
	1086
	1087	IF ( av == 0 ) THEN
	1088	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1089	WRITE ( io, 339 ) skip_time_domask(mid)
	1090	ENDIF
	1091	ELSE
	1092	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1093	WRITE ( io, 339 ) skip_time_data_output_av
	1094	ENDIF
	1095	ENDIF
	1096	!
	1097	!-- output locations
	1098	DO dim = 1, 3
	1099	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1100	count = 0
	1101	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1102	count = count + 1
	1103	ENDDO
	1104	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1105	mask(mid,dim,:count)
	1106	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1107	mask_loop(mid,dim,2) < 0.0 .AND. &
	1108	mask_loop(mid,dim,3) == 0.0 ) THEN
	1109	WRITE ( io, 350 ) dir(dim), dir(dim)
	1110	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1111	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1112	mask_loop(mid,dim,1:2)
	1113	ELSE
	1114	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1115	mask_loop(mid,dim,1:3)
	1116	ENDIF
	1117	ENDDO
	1118	ENDIF
	1119
	1120	ENDDO
	1121	ENDDO
	1122
	1123	!
[1]	1124	!-- Timeseries
	1125	IF ( dt_dots /= 9999999.9 ) THEN
	1126	WRITE ( io, 340 )
	1127
	1128	output_format = ''
	1129	IF ( netcdf_output ) THEN
[493]	1130	IF ( netcdf_data_format == 1 ) THEN
	1131	output_format = 'NetCDF classic'
[1]	1132	ELSE
[493]	1133	output_format = 'NetCDF 64bit offset'
[1]	1134	ENDIF
	1135	ENDIF
	1136	IF ( profil_output ) THEN
	1137	IF ( netcdf_output ) THEN
	1138	output_format = TRIM( output_format ) // ' and profil'
	1139	ELSE
	1140	output_format = 'profil'
	1141	ENDIF
	1142	ENDIF
[292]	1143	WRITE ( io, 344 ) output_format
[1]	1144	WRITE ( io, 341 ) dt_dots
	1145	ENDIF
	1146
	1147	#if defined( __dvrp_graphics )
	1148	!
	1149	!-- Dvrp-output
	1150	IF ( dt_dvrp /= 9999999.9 ) THEN
	1151	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1152	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1153	i = 1
	1154	l = 0
[336]	1155	m = 0
[1]	1156	DO WHILE ( mode_dvrp(i) /= ' ' )
	1157	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1158	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1159	l = l + 1
	1160	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1161	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1162	isosurface_color(:,l)
[1]	1163	ENDIF
	1164	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1165	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1166	m = m + 1
	1167	IF ( do2d(0,j) /= ' ' ) THEN
	1168	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1169	slicer_range_limits_dvrp(:,m)
	1170	ENDIF
[1]	1171	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1172	WRITE ( io, 363 ) dvrp_psize
	1173	IF ( particle_dvrpsize /= 'none' ) THEN
	1174	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1175	dvrpsize_interval
	1176	ENDIF
	1177	IF ( particle_color /= 'none' ) THEN
	1178	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1179	color_interval
	1180	ENDIF
[1]	1181	ENDIF
	1182	i = i + 1
	1183	ENDDO
[237]	1184
[336]	1185	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1186	superelevation_y, superelevation, clip_dvrp_l, &
	1187	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1188
	1189	IF ( TRIM( topography ) /= 'flat' ) THEN
	1190	WRITE ( io, 366 ) topography_color
	1191	IF ( cluster_size > 1 ) THEN
	1192	WRITE ( io, 367 ) cluster_size
	1193	ENDIF
[237]	1194	ENDIF
	1195
[1]	1196	ENDIF
	1197	#endif
	1198
	1199	#if defined( __spectra )
	1200	!
	1201	!-- Spectra output
	1202	IF ( dt_dosp /= 9999999.9 ) THEN
	1203	WRITE ( io, 370 )
	1204
	1205	output_format = ''
	1206	IF ( netcdf_output ) THEN
[493]	1207	IF ( netcdf_data_format == 1 ) THEN
	1208	output_format = 'NetCDF classic'
[1]	1209	ELSE
[493]	1210	output_format = 'NetCDF 64bit offset'
[1]	1211	ENDIF
	1212	ENDIF
	1213	IF ( profil_output ) THEN
	1214	IF ( netcdf_output ) THEN
	1215	output_format = TRIM( output_format ) // ' and profil'
	1216	ELSE
	1217	output_format = 'profil'
	1218	ENDIF
	1219	ENDIF
[292]	1220	WRITE ( io, 344 ) output_format
[1]	1221	WRITE ( io, 371 ) dt_dosp
	1222	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1223	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1224	( spectra_direction(i), i = 1,10 ), &
[189]	1225	( comp_spectra_level(i), i = 1,100 ), &
	1226	( plot_spectra_level(i), i = 1,100 ), &
[1]	1227	averaging_interval_sp, dt_averaging_input_pr
	1228	ENDIF
	1229	#endif
	1230
	1231	WRITE ( io, 99 )
	1232
	1233	!
	1234	!-- Physical quantities
	1235	WRITE ( io, 400 )
	1236
	1237	!
	1238	!-- Geostrophic parameters
	1239	WRITE ( io, 410 ) omega, phi, f, fs
	1240
	1241	!
	1242	!-- Other quantities
	1243	WRITE ( io, 411 ) g
[97]	1244	IF ( use_reference ) THEN
	1245	IF ( ocean ) THEN
	1246	WRITE ( io, 412 ) prho_reference
	1247	ELSE
	1248	WRITE ( io, 413 ) pt_reference
	1249	ENDIF
	1250	ENDIF
[1]	1251
	1252	!
	1253	!-- Cloud physics parameters
	1254	IF ( cloud_physics ) THEN
[57]	1255	WRITE ( io, 415 )
	1256	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1257	ENDIF
	1258
	1259	!-- Profile of the geostrophic wind (component ug)
	1260	!-- Building output strings
	1261	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1262	gradients = '------'
	1263	slices = ' 0'
	1264	coordinates = ' 0.0'
	1265	i = 1
	1266	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1267
[167]	1268	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1269	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1272	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1273
[167]	1274	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1275	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1276
[167]	1277	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1278	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1279
[430]	1280	IF ( i == 10 ) THEN
	1281	EXIT
	1282	ELSE
	1283	i = i + 1
	1284	ENDIF
	1285
[1]	1286	ENDDO
	1287
	1288	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1289	TRIM( gradients ), TRIM( slices )
	1290
	1291	!-- Profile of the geostrophic wind (component vg)
	1292	!-- Building output strings
	1293	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1294	gradients = '------'
	1295	slices = ' 0'
	1296	coordinates = ' 0.0'
	1297	i = 1
	1298	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1299
[167]	1300	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1301	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1302
[167]	1303	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1304	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1305
[167]	1306	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1307	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1308
[167]	1309	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1310	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1311
[430]	1312	IF ( i == 10 ) THEN
	1313	EXIT
	1314	ELSE
	1315	i = i + 1
	1316	ENDIF
	1317
[1]	1318	ENDDO
	1319
	1320	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1321	TRIM( gradients ), TRIM( slices )
	1322
	1323	!
[767]	1324	!-- Initial wind profiles
	1325	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1326
	1327	!
[1]	1328	!-- Initial temperature profile
	1329	!-- Building output strings, starting with surface temperature
	1330	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1331	gradients = '------'
	1332	slices = ' 0'
	1333	coordinates = ' 0.0'
	1334	i = 1
	1335	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1336
[94]	1337	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1338	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1339
[94]	1340	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1341	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1342
[94]	1343	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1344	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1345
[94]	1346	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1347	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1348
[430]	1349	IF ( i == 10 ) THEN
	1350	EXIT
	1351	ELSE
	1352	i = i + 1
	1353	ENDIF
	1354
[1]	1355	ENDDO
	1356
	1357	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1358	TRIM( gradients ), TRIM( slices )
	1359
	1360	!
	1361	!-- Initial humidity profile
	1362	!-- Building output strings, starting with surface humidity
[75]	1363	IF ( humidity .OR. passive_scalar ) THEN
[1]	1364	WRITE ( temperatures, '(E8.1)' ) q_surface
	1365	gradients = '--------'
	1366	slices = ' 0'
	1367	coordinates = ' 0.0'
	1368	i = 1
	1369	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1370
	1371	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1372	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1373
	1374	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1375	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1376
	1377	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1378	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1379
	1380	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1381	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1382
[430]	1383	IF ( i == 10 ) THEN
	1384	EXIT
	1385	ELSE
	1386	i = i + 1
	1387	ENDIF
	1388
[1]	1389	ENDDO
	1390
[75]	1391	IF ( humidity ) THEN
[1]	1392	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1393	TRIM( gradients ), TRIM( slices )
	1394	ELSE
	1395	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1396	TRIM( gradients ), TRIM( slices )
	1397	ENDIF
	1398	ENDIF
	1399
	1400	!
[97]	1401	!-- Initial salinity profile
	1402	!-- Building output strings, starting with surface salinity
	1403	IF ( ocean ) THEN
	1404	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1405	gradients = '------'
	1406	slices = ' 0'
	1407	coordinates = ' 0.0'
	1408	i = 1
	1409	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1410
	1411	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1412	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1413
	1414	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1415	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1416
	1417	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1418	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1419
	1420	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1421	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1422
[430]	1423	IF ( i == 10 ) THEN
	1424	EXIT
	1425	ELSE
	1426	i = i + 1
	1427	ENDIF
	1428
[97]	1429	ENDDO
	1430
	1431	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1432	TRIM( gradients ), TRIM( slices )
	1433	ENDIF
	1434
	1435	!
[411]	1436	!-- Profile for the large scale vertial velocity
	1437	!-- Building output strings, starting with surface value
	1438	IF ( large_scale_subsidence ) THEN
	1439	temperatures = ' 0.0'
	1440	gradients = '------'
	1441	slices = ' 0'
	1442	coordinates = ' 0.0'
	1443	i = 1
[580]	1444	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1445
	1446	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1447	w_subs(subs_vertical_gradient_level_i(i))
[411]	1448	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1449
[580]	1450	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1451	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1452
[580]	1453	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1454	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1455
[580]	1456	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1457	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1458
[430]	1459	IF ( i == 10 ) THEN
	1460	EXIT
	1461	ELSE
	1462	i = i + 1
	1463	ENDIF
	1464
[411]	1465	ENDDO
	1466
	1467	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1468	TRIM( gradients ), TRIM( slices )
	1469	ENDIF
	1470
	1471	!
[1]	1472	!-- LES / turbulence parameters
	1473	WRITE ( io, 450 )
	1474
	1475	!--
	1476	! ... LES-constants used must still be added here
	1477	!--
	1478	IF ( constant_diffusion ) THEN
	1479	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1480	prandtl_number
	1481	ENDIF
	1482	IF ( .NOT. constant_diffusion) THEN
[108]	1483	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1484	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1485	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1486	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1487	ENDIF
	1488
	1489	!
	1490	!-- Special actions during the run
	1491	WRITE ( io, 470 )
	1492	IF ( create_disturbances ) THEN
	1493	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1494	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1495	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1496	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1497	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1498	ELSE
	1499	WRITE ( io, 473 ) disturbance_energy_limit
	1500	ENDIF
	1501	WRITE ( io, 474 ) TRIM( random_generator )
	1502	ENDIF
	1503	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1504	WRITE ( io, 475 ) pt_surface_initial_change
	1505	ENDIF
[75]	1506	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1507	WRITE ( io, 476 ) q_surface_initial_change
	1508	ENDIF
	1509	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1510	WRITE ( io, 477 ) q_surface_initial_change
	1511	ENDIF
	1512
[60]	1513	IF ( particle_advection ) THEN
[1]	1514	!
[60]	1515	!-- Particle attributes
	1516	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1517	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1518	end_time_prel, dt_sort_particles
[60]	1519	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1520	IF ( random_start_position ) WRITE ( io, 481 )
	1521	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1522	WRITE ( io, 495 ) total_number_of_particles
	1523	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1524	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1525	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1526	WRITE ( io, 484 ) total_number_of_tails, &
	1527	minimum_tailpoint_distance, &
	1528	maximum_tailpoint_age
	1529	ENDIF
[1]	1530	ENDIF
[60]	1531	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1532	WRITE ( io, 485 ) dt_write_particle_data
	1533	output_format = ''
	1534	IF ( netcdf_output ) THEN
[493]	1535	IF ( netcdf_data_format > 1 ) THEN
[60]	1536	output_format = 'netcdf (64 bit offset) and binary'
	1537	ELSE
	1538	output_format = 'netcdf and binary'
	1539	ENDIF
[1]	1540	ELSE
[60]	1541	output_format = 'binary'
[1]	1542	ENDIF
[292]	1543	WRITE ( io, 344 ) output_format
[1]	1544	ENDIF
[60]	1545	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1546	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1547
[60]	1548	WRITE ( io, 487 ) number_of_particle_groups
[1]	1549
[60]	1550	DO i = 1, number_of_particle_groups
	1551	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1552	WRITE ( io, 490 ) i, 0.0
	1553	WRITE ( io, 492 )
[1]	1554	ELSE
[60]	1555	WRITE ( io, 490 ) i, radius(i)
	1556	IF ( density_ratio(i) /= 0.0 ) THEN
	1557	WRITE ( io, 491 ) density_ratio(i)
	1558	ELSE
	1559	WRITE ( io, 492 )
	1560	ENDIF
[1]	1561	ENDIF
[60]	1562	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1563	pdx(i), pdy(i), pdz(i)
[336]	1564	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1565	ENDDO
[1]	1566
[60]	1567	ENDIF
[1]	1568
[60]	1569
[1]	1570	!
	1571	!-- Parameters of 1D-model
	1572	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1573	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1574	mixing_length_1d, dissipation_1d
	1575	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1576	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1577	ENDIF
	1578	ENDIF
	1579
	1580	!
	1581	!-- User-defined informations
	1582	CALL user_header( io )
	1583
	1584	WRITE ( io, 99 )
	1585
	1586	!
	1587	!-- Write buffer contents to disc immediately
[82]	1588	CALL local_flush( io )
[1]	1589
	1590	!
	1591	!-- Here the FORMATs start
	1592
	1593	99 FORMAT (1X,78('-'))
[200]	1594	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1595	1X,'* ',A,' *',9X,A/ &
	1596	1X,'***************************',9X,42('-'))
[291]	1597	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1598	37X,42('-'))
[200]	1599	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1600	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1601	' Run on host: ',A10)
[1]	1602	#if defined( __parallel )
[200]	1603	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1604	')',1X,A)
[200]	1605	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1606	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1607	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1608	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1609	37X,'because the job is running on an SMP-cluster')
[102]	1610	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1611	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1612	#endif
	1613	110 FORMAT (/' Numerical Schemes:'/ &
	1614	' -----------------'/)
	1615	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1616	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1617	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1618	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1619	' or Upstream')
	1620	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1621	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1622	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1623	' or Upstream')
	1624	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1625	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1626	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1627	' Translation velocity = ',A/ &
	1628	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1629	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1630	' of timestep changes)')
	1631	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1632	' timestep changes')
	1633	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1634	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1635	' maximum damping coefficient: ',F5.3, ' 1/s')
	1636	124 FORMAT (' Spline-overshoots are being suppressed')
	1637	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1638	' of'/ &
	1639	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1640	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1641	' of'/ &
	1642	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1643	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1644	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1645	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1646	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1647	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1648	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1649	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1650	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1651	' effective emissivity scheme')
	1652	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1653	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1654	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1655	A,'-cycle)'/ &
	1656	' number of grid levels: ',I2/ &
	1657	' Gauss-Seidel red/black iterations: ',I2)
	1658	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1659	I3,')')
	1660	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1661	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1662	I3,')'/ &
	1663	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1664	I3,')')
	1665	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1666	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1667	140 FORMAT (' maximum residual allowed: ',E10.3)
	1668	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1669	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1670	'step')
[87]	1671	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1672	'kinetic energy')
[1]	1673	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1674	'conserved'/ &
	1675	' using the ',A,' mode')
	1676	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1677	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1678	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1679	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1680	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1681	'prognostic equation for')
	1682	154 FORMAT (' the potential temperature')
[1]	1683	200 FORMAT (//' Run time and time step information:'/ &
	1684	' ----------------------------------'/)
	1685	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1686	' CFL-factor: ',F4.2)
	1687	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1688	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1689	' End time: ',F9.3,' s')
	1690	204 FORMAT ( A,F9.3,' s')
	1691	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1692	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1693	' CPU-time used: ',F9.3,' s per timestep: ', &
	1694	' ',F9.3,' s'/ &
	1695	' per second of simulated tim', &
	1696	'e: ',F9.3,' s')
[291]	1697	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1698	250 FORMAT (//' Computational grid and domain size:'/ &
	1699	' ----------------------------------'// &
	1700	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1701	' m dz = ',F7.3,' m'/ &
	1702	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1703	' m z(u) = ',F10.3,' m'/)
	1704	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1705	' factor: ',F5.3/ &
	1706	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1707	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1708	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1709	255 FORMAT (' Subdomains have equal size')
	1710	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1711	'have smaller sizes'/ &
	1712	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1713	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1714	' degrees')
	1715	270 FORMAT (//' Topography informations:'/ &
	1716	' -----------------------'// &
	1717	1X,'Topography: ',A)
	1718	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1719	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1720	' / ',I4)
[240]	1721	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1722	' direction' / &
	1723	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1724	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1725	278 FORMAT (' Topography grid definition convention:'/ &
	1726	' cell edge (staggered grid points'/ &
	1727	' (u in x-direction, v in y-direction))' /)
	1728	279 FORMAT (' Topography grid definition convention:'/ &
	1729	' cell center (scalar grid points)' /)
[138]	1730	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1731	' ------------------------------'// &
	1732	' Canopy mode: ', A / &
	1733	' Canopy top: ',I4 / &
	1734	' Leaf drag coefficient: ',F6.2 /)
[153]	1735	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1736	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1737	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1738	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1739	' Height: ',A,' m'/ &
	1740	' Leaf area density: ',A,' m2/m3'/ &
	1741	' Gradient: ',A,' m2/m4'/ &
	1742	' Gridpoint: ',A)
	1743
[1]	1744	300 FORMAT (//' Boundary conditions:'/ &
	1745	' -------------------'// &
	1746	' p uv ', &
	1747	' pt'// &
	1748	' B. bound.: ',A/ &
	1749	' T. bound.: ',A)
[97]	1750	301 FORMAT (/' ',A// &
[1]	1751	' B. bound.: ',A/ &
	1752	' T. bound.: ',A)
[19]	1753	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1754	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1755	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1756	'computational u,v-level:'// &
[1]	1757	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1758	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1759	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1760	307 FORMAT (' Heatflux has a random normal distribution')
	1761	308 FORMAT (' Predefined surface temperature')
[97]	1762	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1763	310 FORMAT (//' 1D-Model:'// &
	1764	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1765	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1766	312 FORMAT (' Predefined surface humidity')
	1767	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1768	314 FORMAT (' Predefined scalar value at the surface')
[19]	1769	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1770	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1771	'atmosphere model')
[1]	1772	317 FORMAT (//' Lateral boundaries:'/ &
	1773	' left/right: ',A/ &
	1774	' north/south: ',A)
	1775	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1776	'max =',F5.1,' m**2/s')
[151]	1777	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1778	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1779	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1780	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1781	' v: ',F9.6,' m2/s2')
[151]	1782	325 FORMAT (//' List output:'/ &
[1]	1783	' -----------'// &
	1784	' 1D-Profiles:'/ &
	1785	' Output every ',F8.2,' s')
[151]	1786	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1787	' Averaging input every ',F8.2,' s')
	1788	330 FORMAT (//' Data output:'/ &
	1789	' -----------'/)
	1790	331 FORMAT (/' 1D-Profiles:')
	1791	332 FORMAT (/' ',A)
	1792	333 FORMAT (' Output every ',F8.2,' s',/ &
	1793	' Time averaged over ',F8.2,' s'/ &
	1794	' Averaging input every ',F8.2,' s')
	1795	334 FORMAT (/' 2D-Arrays',A,':')
	1796	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1797	' Output every ',F8.2,' s ',A/ &
	1798	' Cross sections at ',A1,' = ',A/ &
	1799	' scalar-coordinates: ',A,' m'/)
	1800	336 FORMAT (/' 3D-Arrays',A,':')
	1801	337 FORMAT (/' Arrays: ',A/ &
	1802	' Output every ',F8.2,' s ',A/ &
	1803	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1804	338 FORMAT (' Compressed data output'/ &
	1805	' Decimal precision: ',A/)
	1806	339 FORMAT (' No output during initial ',F8.2,' s')
	1807	340 FORMAT (/' Time series:')
	1808	341 FORMAT (' Output every ',F8.2,' s'/)
	1809	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1810	' Output every ',F8.2,' s ',A/ &
	1811	' Time averaged over ',F8.2,' s'/ &
	1812	' Averaging input every ',F8.2,' s'/ &
	1813	' Cross sections at ',A1,' = ',A/ &
	1814	' scalar-coordinates: ',A,' m'/)
	1815	343 FORMAT (/' Arrays: ',A/ &
	1816	' Output every ',F8.2,' s ',A/ &
	1817	' Time averaged over ',F8.2,' s'/ &
	1818	' Averaging input every ',F8.2,' s'/ &
	1819	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1820	344 FORMAT (' Output format: ',A/)
[410]	1821	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1822	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1823	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1824	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1825	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1826	347 FORMAT (' Variables: ',A/ &
	1827	' Output every ',F8.2,' s')
	1828	348 FORMAT (' Variables: ',A/ &
	1829	' Output every ',F8.2,' s'/ &
	1830	' Time averaged over ',F8.2,' s'/ &
	1831	' Averaging input every ',F8.2,' s')
	1832	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1833	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1834	13(' ',8(F8.2,',')/) )
	1835	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1836	'all gridpoints along ',A,'-direction (default).' )
	1837	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1838	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1839	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1840	#if defined( __dvrp_graphics )
	1841	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1842	' Output every ',F7.1,' s'/ &
	1843	' Output mode: ',A/ &
	1844	' Host / User: ',A,' / ',A/ &
	1845	' Directory: ',A// &
	1846	' The sequence contains:')
[337]	1847	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1848	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1849	362 FORMAT (/' Slicer plane ',A/ &
[336]	1850	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1851	363 FORMAT (/' Particles'/ &
[336]	1852	' particle size: ',F7.2,' m')
	1853	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1854	F6.2,',',F6.2,']')
[337]	1855	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1856	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1857	')'/ &
	1858	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1859	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1860	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1861	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1862	#endif
	1863	#if defined( __spectra )
	1864	370 FORMAT (' Spectra:')
	1865	371 FORMAT (' Output every ',F7.1,' s'/)
	1866	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1867	' Directions: ', 10(A5,',')/ &
[189]	1868	' height levels k = ', 20(I3,',')/ &
	1869	' ', 20(I3,',')/ &
	1870	' ', 20(I3,',')/ &
	1871	' ', 20(I3,',')/ &
	1872	' ', 19(I3,','),I3,'.'/ &
[1]	1873	' height levels selected for standard plot:'/ &
[189]	1874	' k = ', 20(I3,',')/ &
	1875	' ', 20(I3,',')/ &
	1876	' ', 20(I3,',')/ &
	1877	' ', 20(I3,',')/ &
	1878	' ', 19(I3,','),I3,'.'/ &
[1]	1879	' Time averaged over ', F7.1, ' s,' / &
	1880	' Profiles for the time averaging are taken every ', &
	1881	F6.1,' s')
	1882	#endif
	1883	400 FORMAT (//' Physical quantities:'/ &
	1884	' -------------------'/)
	1885	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1886	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1887	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1888	' f* = ',F9.6,' 1/s')
	1889	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1890	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1891	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1892	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1893	' ------------------------'/)
[57]	1894	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1895	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1896	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1897	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1898	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1899	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1900	' Height: ',A,' m'/ &
	1901	' Temperature: ',A,' K'/ &
	1902	' Gradient: ',A,' K/100m'/ &
	1903	' Gridpoint: ',A)
	1904	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1905	' Height: ',A,' m'/ &
	1906	' Humidity: ',A,' kg/kg'/ &
	1907	' Gradient: ',A,' (kg/kg)/100m'/ &
	1908	' Gridpoint: ',A)
	1909	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1910	' Height: ',A,' m'/ &
	1911	' Scalar concentration: ',A,' kg/m**3'/ &
	1912	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1913	' Gridpoint: ',A)
	1914	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1915	' Height: ',A,' m'/ &
	1916	' ug: ',A,' m/s'/ &
	1917	' Gradient: ',A,' 1/100s'/ &
	1918	' Gridpoint: ',A)
	1919	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1920	' Height: ',A,' m'/ &
[97]	1921	' vg: ',A,' m/s'/ &
[1]	1922	' Gradient: ',A,' 1/100s'/ &
	1923	' Gridpoint: ',A)
[97]	1924	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1925	' Height: ',A,' m'/ &
	1926	' Salinity: ',A,' psu'/ &
	1927	' Gradient: ',A,' psu/100m'/ &
	1928	' Gridpoint: ',A)
[411]	1929	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1930	' Height: ',A,' m'/ &
	1931	' w_subs: ',A,' m/s'/ &
	1932	' Gradient: ',A,' (m/s)/100m'/ &
	1933	' Gridpoint: ',A)
[767]	1934	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1935	' profiles')
[1]	1936	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1937	' ---------------------------'/)
	1938	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1939	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1940	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1941	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1942	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1943	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1944	470 FORMAT (//' Actions during the simulation:'/ &
	1945	' -----------------------------'/)
[94]	1946	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1947	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1948	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1949	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1950	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1951	' to i/j =',I4)
	1952	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1953	1X,F5.3, ' m2/s2')
	1954	474 FORMAT (' Random number generator used : ',A/)
	1955	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1956	'respectively, if'/ &
	1957	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1958	' 3D-simulation'/)
	1959	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1960	'respectively, if the'/ &
	1961	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1962	' the 3D-simulation'/)
	1963	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1964	'respectively, if the'/ &
	1965	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1966	' the 3D-simulation'/)
	1967	480 FORMAT (' Particles:'/ &
	1968	' ---------'// &
	1969	' Particle advection is active (switched on at t = ', F7.1, &
	1970	' s)'/ &
	1971	' Start of new particle generations every ',F6.1,' s'/ &
	1972	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1973	' bottom: ', A, ' top: ', A/&
	1974	' Maximum particle age: ',F9.1,' s'/ &
[117]	1975	' Advection stopped at t = ',F9.1,' s'/ &
	1976	' Particles are sorted every ',F9.1,' s'/)
[1]	1977	481 FORMAT (' Particles have random start positions'/)
[336]	1978	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1979	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1980	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1981	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1982	' Maximum age of the end of the tail: ',F8.2,' s')
	1983	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1984	486 FORMAT (' Particle statistics are written on file'/)
	1985	487 FORMAT (' Number of particle groups: ',I2/)
	1986	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1987	' minimum timestep for advection: ', F7.5/)
	1988	489 FORMAT (' Number of particles simultaneously released at each ', &
	1989	'point: ', I5/)
	1990	490 FORMAT (' Particle group ',I2,':'/ &
	1991	' Particle radius: ',E10.3, 'm')
	1992	491 FORMAT (' Particle inertia is activated'/ &
	1993	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1994	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1995	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1996	' y:',F8.1,' - ',F8.1,' m'/&
	1997	' z:',F8.1,' - ',F8.1,' m'/&
	1998	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1999	' m dz = ',F8.1,' m'/)
	2000	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2001	F8.2,' s'/)
	2002	495 FORMAT (' Number of particles in total domain: ',I10/)
	2003	500 FORMAT (//' 1D-Model parameters:'/ &
	2004	' -------------------'// &
	2005	' Simulation time: ',F8.1,' s'/ &
	2006	' Run-controll output every: ',F8.1,' s'/ &
	2007	' Vertical profile output every: ',F8.1,' s'/ &
	2008	' Mixing length calculation: ',A/ &
	2009	' Dissipation calculation: ',A/)
	2010	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2011	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2012	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2013
	2014
	2015	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |