Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 824

Last change on this file since 824 was 824, checked in by raasch, 12 years ago
preliminary checkin of new curvature/solution effects on droplet growth
Property svn:keywords set to `Id`
File size: 78.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of cloud physics parameters/quantities complemented and restructured
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 824 2012-02-17 09:09:57Z raasch $
11	!
12	! 767 2011-10-14 06:39:12Z raasch
13	! Output of given initial u,v-profiles
14	!
15	! 759 2011-09-15 13:58:31Z raasch
16	! output of maximum number of parallel io streams
17	!
18	! 707 2011-03-29 11:39:40Z raasch
19	! bc_lr/ns replaced by bc_lr/ns_cyc
20	!
21	! 667 2010-12-23 12:06:00Z suehring/gryschka
22	! Output of advection scheme.
23	! Modified output of Prandtl-layer height.
24	!
25	! 580 2010-10-05 13:59:11Z heinze
26	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
27	! ws_vertical_gradient_level to subs_vertical_gradient_level and
28	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
29	!
30	! 493 2010-03-01 08:30:24Z raasch
31	! NetCDF data output format extendend for NetCDF4/HDF5
32	!
33	! 449 2010-02-02 11:23:59Z raasch
34	! +large scale vertical motion (subsidence/ascent)
35	! Bugfix: index problem concerning gradient_level indices removed
36	!
37	! 410 2009-12-04 17:05:40Z letzel
38	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
39	! mask_scale\|_x\|y\|z, masks, skip_time_domask
40	!
41	! 346 2009-07-06 10:13:41Z raasch
42	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
43	! Coupling with independent precursor runs.
44	! Output of messages replaced by message handling routine.
45	! Output of several additional dvr parameters
46	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
47	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
48	! dp_smooth, dpdxy, u_bulk, v_bulk
49	! topography_grid_convention moved from user_header
50	! small bugfix concerning 3d 64bit netcdf output format
51	!
52	! 206 2008-10-13 14:59:11Z raasch
53	! Bugfix: error in zu index in case of section_xy = -1
54	!
55	! 198 2008-09-17 08:55:28Z raasch
56	! Format adjustments allowing output of larger revision numbers
57	!
58	! 197 2008-09-16 15:29:03Z raasch
59	! allow 100 spectra levels instead of 10 for consistency with
60	! define_netcdf_header,
61	! bugfix in the output of the characteristic levels of potential temperature,
62	! geostrophic wind, scalar concentration, humidity and leaf area density,
63	! output of turbulence recycling informations
64	!
65	! 138 2007-11-28 10:03:58Z letzel
66	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
67	! Allow two instead of one digit to specify isosurface and slicer variables.
68	! Output of sorting frequency of particles
69	!
70	! 108 2007-08-24 15:10:38Z letzel
71	! Output of informations for coupled model runs (boundary conditions etc.)
72	! + output of momentumfluxes at the top boundary
73	! Rayleigh damping for ocean, e_init
74	!
75	! 97 2007-06-21 08:23:15Z raasch
76	! Adjustments for the ocean version.
77	! use_pt_reference renamed use_reference
78	!
79	! 87 2007-05-22 15:46:47Z raasch
80	! Bugfix: output of use_upstream_for_tke
81	!
82	! 82 2007-04-16 15:40:52Z raasch
83	! Preprocessor strings for different linux clusters changed to "lc",
84	! routine local_flush is used for buffer flushing
85	!
86	! 76 2007-03-29 00:58:32Z raasch
87	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
88	! output of the loop optimization method, moisture renamed humidity,
89	! output of subversion revision number
90	!
91	! 19 2007-02-23 04:53:48Z raasch
92	! Output of scalar flux applied at top boundary
93	!
94	! RCS Log replace by Id keyword, revision history cleaned up
95	!
96	! Revision 1.63 2006/08/22 13:53:13 raasch
97	! Output of dz_max
98	!
99	! Revision 1.1 1997/08/11 06:17:20 raasch
100	! Initial revision
101	!
102	!
103	! Description:
104	! ------------
105	! Writing a header with all important informations about the actual run.
106	! This subroutine is called three times, two times at the beginning
107	! (writing information on files RUN_CONTROL and HEADER) and one time at the
108	! end of the run, then writing additional information about CPU-usage on file
109	! header.
110	!-----------------------------------------------------------------------------!
111
112	USE arrays_3d
113	USE control_parameters
114	USE cloud_parameters
115	USE cpulog
116	USE dvrp_variables
117	USE grid_variables
118	USE indices
119	USE model_1d
120	USE particle_attributes
121	USE pegrid
122	USE subsidence_mod
123	USE spectrum
124
125	IMPLICIT NONE
126
127	CHARACTER (LEN=1) :: prec
128	CHARACTER (LEN=2) :: do2d_mode
129	CHARACTER (LEN=5) :: section_chr
130	CHARACTER (LEN=9) :: time_to_string
131	CHARACTER (LEN=10) :: coor_chr, host_chr
132	CHARACTER (LEN=16) :: begin_chr
133	CHARACTER (LEN=23) :: ver_rev
134	CHARACTER (LEN=40) :: output_format
135	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
136	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
137	domask_chr, run_classification
138	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
139	temperatures, ugcomponent, vgcomponent
140	CHARACTER (LEN=85) :: roben, runten
141
142	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
143
144	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
145	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
146	REAL :: cpuseconds_per_simulated_second
147
148	!
149	!-- Open the output file. At the end of the simulation, output is directed
150	!-- to unit 19.
151	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
152	.NOT. simulated_time_at_begin /= simulated_time ) THEN
153	io = 15 ! header output on file RUN_CONTROL
154	ELSE
155	io = 19 ! header output on file HEADER
156	ENDIF
157	CALL check_open( io )
158
159	!
160	!-- At the end of the run, output file (HEADER) will be rewritten with
161	!-- new informations
162	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
163
164	!
165	!-- Determine kind of model run
166	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
167	run_classification = '3D - restart run'
168	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
169	run_classification = '3D - run with cyclic fill of 3D - prerun data'
170	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
171	run_classification = '3D - run without 1D - prerun'
172	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
173	run_classification = '3D - run with 1D - prerun'
174	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
175	run_classification = '3D - run initialized by user'
176	ELSE
177	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
178	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
179	ENDIF
180	IF ( ocean ) THEN
181	run_classification = 'ocean - ' // run_classification
182	ELSE
183	run_classification = 'atmosphere - ' // run_classification
184	ENDIF
185
186	!
187	!-- Run-identification, date, time, host
188	host_chr = host(1:10)
189	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
190	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
191	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
192	#if defined( __mpi2 )
193	mpi_type = 2
194	#else
195	mpi_type = 1
196	#endif
197	WRITE ( io, 101 ) mpi_type, coupling_mode
198	ENDIF
199	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
200	ADJUSTR( host_chr )
201	#if defined( __parallel )
202	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
203	char1 = 'calculated'
204	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
205	host(1:2) == 'lc' ) .AND. &
206	npex == -1 .AND. pdims(2) == 1 ) THEN
207	char1 = 'forced'
208	ELSE
209	char1 = 'predefined'
210	ENDIF
211	IF ( threads_per_task == 1 ) THEN
212	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
213	ELSE
214	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
215	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
216	ENDIF
217	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
218	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
219	npex == -1 .AND. pdims(2) == 1 ) &
220	THEN
221	WRITE ( io, 106 )
222	ELSEIF ( pdims(2) == 1 ) THEN
223	WRITE ( io, 107 ) 'x'
224	ELSEIF ( pdims(1) == 1 ) THEN
225	WRITE ( io, 107 ) 'y'
226	ENDIF
227	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
228	IF ( numprocs /= maximum_parallel_io_streams ) THEN
229	WRITE ( io, 108 ) maximum_parallel_io_streams
230	ENDIF
231	#endif
232	WRITE ( io, 99 )
233
234	!
235	!-- Numerical schemes
236	WRITE ( io, 110 )
237	IF ( psolver(1:7) == 'poisfft' ) THEN
238	WRITE ( io, 111 ) TRIM( fft_method )
239	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
240	ELSEIF ( psolver == 'sor' ) THEN
241	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
242	ELSEIF ( psolver == 'multigrid' ) THEN
243	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
244	IF ( mg_cycles == -1 ) THEN
245	WRITE ( io, 140 ) residual_limit
246	ELSE
247	WRITE ( io, 141 ) mg_cycles
248	ENDIF
249	IF ( mg_switch_to_pe0_level == 0 ) THEN
250	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
251	nzt_mg(1)
252	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
253	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
254	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
255	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
256	nzt_mg(mg_switch_to_pe0_level), &
257	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
258	nzt_mg(1)
259	ENDIF
260	ENDIF
261	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
262	THEN
263	WRITE ( io, 142 )
264	ENDIF
265
266	IF ( momentum_advec == 'pw-scheme' ) THEN
267	WRITE ( io, 113 )
268	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
269	WRITE ( io, 503 )
270	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
271	WRITE ( io, 114 )
272	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
273	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
274	overshoot_limit_w /= 0.0 ) THEN
275	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
276	overshoot_limit_w
277	ENDIF
278	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
279	ups_limit_w /= 0.0 ) &
280	THEN
281	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
282	ENDIF
283	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
284	ENDIF
285	IF ( scalar_advec == 'pw-scheme' ) THEN
286	WRITE ( io, 116 )
287	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
288	WRITE ( io, 504 )
289	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
290	WRITE ( io, 117 )
291	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
292	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
293	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
294	ENDIF
295	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
296	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
297	ENDIF
298	ELSE
299	WRITE ( io, 118 )
300	ENDIF
301
302	WRITE ( io, 139 ) TRIM( loop_optimization )
303
304	IF ( galilei_transformation ) THEN
305	IF ( use_ug_for_galilei_tr ) THEN
306	char1 = 'geostrophic wind'
307	ELSE
308	char1 = 'mean wind in model domain'
309	ENDIF
310	IF ( simulated_time_at_begin == simulated_time ) THEN
311	char2 = 'at the start of the run'
312	ELSE
313	char2 = 'at the end of the run'
314	ENDIF
315	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
316	advected_distance_x/1000.0, advected_distance_y/1000.0
317	ENDIF
318	IF ( timestep_scheme == 'leapfrog' ) THEN
319	WRITE ( io, 120 )
320	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
321	WRITE ( io, 121 )
322	ELSE
323	WRITE ( io, 122 ) timestep_scheme
324	ENDIF
325	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
326	IF ( rayleigh_damping_factor /= 0.0 ) THEN
327	IF ( .NOT. ocean ) THEN
328	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
329	rayleigh_damping_factor
330	ELSE
331	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
332	rayleigh_damping_factor
333	ENDIF
334	ENDIF
335	IF ( humidity ) THEN
336	IF ( .NOT. cloud_physics ) THEN
337	WRITE ( io, 129 )
338	ELSE
339	WRITE ( io, 130 )
340	ENDIF
341	ENDIF
342	IF ( passive_scalar ) WRITE ( io, 134 )
343	IF ( conserve_volume_flow ) THEN
344	WRITE ( io, 150 ) conserve_volume_flow_mode
345	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
346	WRITE ( io, 151 ) u_bulk, v_bulk
347	ENDIF
348	ELSEIF ( dp_external ) THEN
349	IF ( dp_smooth ) THEN
350	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
351	ELSE
352	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
353	ENDIF
354	ENDIF
355	IF ( large_scale_subsidence ) THEN
356	WRITE ( io, 153 )
357	WRITE ( io, 154 )
358	ENDIF
359	WRITE ( io, 99 )
360
361	!
362	!-- Runtime and timestep informations
363	WRITE ( io, 200 )
364	IF ( .NOT. dt_fixed ) THEN
365	WRITE ( io, 201 ) dt_max, cfl_factor
366	ELSE
367	WRITE ( io, 202 ) dt
368	ENDIF
369	WRITE ( io, 203 ) simulated_time_at_begin, end_time
370
371	IF ( time_restart /= 9999999.9 .AND. &
372	simulated_time_at_begin == simulated_time ) THEN
373	IF ( dt_restart == 9999999.9 ) THEN
374	WRITE ( io, 204 ) ' Restart at: ',time_restart
375	ELSE
376	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
377	ENDIF
378	ENDIF
379
380	IF ( simulated_time_at_begin /= simulated_time ) THEN
381	i = MAX ( log_point_s(10)%counts, 1 )
382	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
383	cpuseconds_per_simulated_second = 0.0
384	ELSE
385	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
386	( simulated_time - &
387	simulated_time_at_begin )
388	ENDIF
389	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
390	log_point_s(10)%sum / REAL( i ), &
391	cpuseconds_per_simulated_second
392	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
393	IF ( dt_restart == 9999999.9 ) THEN
394	WRITE ( io, 204 ) ' Next restart at: ',time_restart
395	ELSE
396	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
397	ENDIF
398	ENDIF
399	ENDIF
400
401	!
402	!-- Start time for coupled runs, if independent precursor runs for atmosphere
403	!-- and ocean are used. In this case, coupling_start_time defines the time
404	!-- when the coupling is switched on.
405	IF ( coupling_start_time /= 0.0 ) THEN
406	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
407	char1 = 'Precursor run for a coupled atmosphere-ocean run'
408	ELSE
409	char1 = 'Coupled atmosphere-ocean run following independent ' // &
410	'precursor runs'
411	ENDIF
412	WRITE ( io, 207 ) char1, coupling_start_time
413	ENDIF
414
415	!
416	!-- Computational grid
417	IF ( .NOT. ocean ) THEN
418	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
419	IF ( dz_stretch_level_index < nzt+1 ) THEN
420	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
421	dz_stretch_factor, dz_max
422	ENDIF
423	ELSE
424	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
425	IF ( dz_stretch_level_index > 0 ) THEN
426	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
427	dz_stretch_factor, dz_max
428	ENDIF
429	ENDIF
430	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
431	MIN( nnz+2, nzt+2 )
432	IF ( numprocs > 1 ) THEN
433	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
434	WRITE ( io, 255 )
435	ELSE
436	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
437	ENDIF
438	ENDIF
439	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
440
441	!
442	!-- Topography
443	WRITE ( io, 270 ) topography
444	SELECT CASE ( TRIM( topography ) )
445
446	CASE ( 'flat' )
447	! no actions necessary
448
449	CASE ( 'single_building' )
450	blx = INT( building_length_x / dx )
451	bly = INT( building_length_y / dy )
452	bh = INT( building_height / dz )
453
454	IF ( building_wall_left == 9999999.9 ) THEN
455	building_wall_left = ( nx + 1 - blx ) / 2 * dx
456	ENDIF
457	bxl = INT ( building_wall_left / dx + 0.5 )
458	bxr = bxl + blx
459
460	IF ( building_wall_south == 9999999.9 ) THEN
461	building_wall_south = ( ny + 1 - bly ) / 2 * dy
462	ENDIF
463	bys = INT ( building_wall_south / dy + 0.5 )
464	byn = bys + bly
465
466	WRITE ( io, 271 ) building_length_x, building_length_y, &
467	building_height, bxl, bxr, bys, byn
468
469	CASE ( 'single_street_canyon' )
470	ch = NINT( canyon_height / dz )
471	IF ( canyon_width_x /= 9999999.9 ) THEN
472	!
473	!-- Street canyon in y direction
474	cwx = NINT( canyon_width_x / dx )
475	IF ( canyon_wall_left == 9999999.9 ) THEN
476	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
477	ENDIF
478	cxl = NINT( canyon_wall_left / dx )
479	cxr = cxl + cwx
480	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
481
482	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
483	!
484	!-- Street canyon in x direction
485	cwy = NINT( canyon_width_y / dy )
486	IF ( canyon_wall_south == 9999999.9 ) THEN
487	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
488	ENDIF
489	cys = NINT( canyon_wall_south / dy )
490	cyn = cys + cwy
491	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
492	ENDIF
493
494	END SELECT
495
496	IF ( TRIM( topography ) /= 'flat' ) THEN
497	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
498	IF ( TRIM( topography ) == 'single_building' .OR. &
499	TRIM( topography ) == 'single_street_canyon' ) THEN
500	WRITE ( io, 278 )
501	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
502	WRITE ( io, 279 )
503	ENDIF
504	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
505	WRITE ( io, 278 )
506	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
507	WRITE ( io, 279 )
508	ENDIF
509	ENDIF
510
511	IF ( plant_canopy ) THEN
512
513	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
514	IF ( passive_scalar ) THEN
515	WRITE ( io, 281 ) scalar_exchange_coefficient, &
516	leaf_surface_concentration
517	ENDIF
518
519	!
520	!-- Heat flux at the top of vegetation
521	WRITE ( io, 282 ) cthf
522
523	!
524	!-- Leaf area density profile
525	!-- Building output strings, starting with surface value
526	WRITE ( learde, '(F6.2)' ) lad_surface
527	gradients = '------'
528	slices = ' 0'
529	coordinates = ' 0.0'
530	i = 1
531	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
532
533	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
534	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
535
536	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
537	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
538
539	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
540	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
541
542	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
543	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
544
545	i = i + 1
546	ENDDO
547
548	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
549	TRIM( gradients ), TRIM( slices )
550
551	ENDIF
552
553	!
554	!-- Boundary conditions
555	IF ( ibc_p_b == 0 ) THEN
556	runten = 'p(0) = 0 \|'
557	ELSEIF ( ibc_p_b == 1 ) THEN
558	runten = 'p(0) = p(1) \|'
559	ELSE
560	runten = 'p(0) = p(1) +R\|'
561	ENDIF
562	IF ( ibc_p_t == 0 ) THEN
563	roben = 'p(nzt+1) = 0 \|'
564	ELSE
565	roben = 'p(nzt+1) = p(nzt) \|'
566	ENDIF
567
568	IF ( ibc_uv_b == 0 ) THEN
569	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
570	ELSE
571	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
572	ENDIF
573	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
574	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
575	ELSEIF ( ibc_uv_t == 0 ) THEN
576	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
577	ELSE
578	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
579	ENDIF
580
581	IF ( ibc_pt_b == 0 ) THEN
582	runten = TRIM( runten ) // ' pt(0) = pt_surface'
583	ELSEIF ( ibc_pt_b == 1 ) THEN
584	runten = TRIM( runten ) // ' pt(0) = pt(1)'
585	ELSEIF ( ibc_pt_b == 2 ) THEN
586	runten = TRIM( runten ) // ' pt(0) = from coupled model'
587	ENDIF
588	IF ( ibc_pt_t == 0 ) THEN
589	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
590	ELSEIF( ibc_pt_t == 1 ) THEN
591	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
592	ELSEIF( ibc_pt_t == 2 ) THEN
593	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
594
595	ENDIF
596
597	WRITE ( io, 300 ) runten, roben
598
599	IF ( .NOT. constant_diffusion ) THEN
600	IF ( ibc_e_b == 1 ) THEN
601	runten = 'e(0) = e(1)'
602	ELSE
603	runten = 'e(0) = e(1) = (u/0.1)*2'
604	ENDIF
605	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
606
607	WRITE ( io, 301 ) 'e', runten, roben
608
609	ENDIF
610
611	IF ( ocean ) THEN
612	runten = 'sa(0) = sa(1)'
613	IF ( ibc_sa_t == 0 ) THEN
614	roben = 'sa(nzt+1) = sa_surface'
615	ELSE
616	roben = 'sa(nzt+1) = sa(nzt)'
617	ENDIF
618	WRITE ( io, 301 ) 'sa', runten, roben
619	ENDIF
620
621	IF ( humidity ) THEN
622	IF ( ibc_q_b == 0 ) THEN
623	runten = 'q(0) = q_surface'
624	ELSE
625	runten = 'q(0) = q(1)'
626	ENDIF
627	IF ( ibc_q_t == 0 ) THEN
628	roben = 'q(nzt) = q_top'
629	ELSE
630	roben = 'q(nzt) = q(nzt-1) + dq/dz'
631	ENDIF
632	WRITE ( io, 301 ) 'q', runten, roben
633	ENDIF
634
635	IF ( passive_scalar ) THEN
636	IF ( ibc_q_b == 0 ) THEN
637	runten = 's(0) = s_surface'
638	ELSE
639	runten = 's(0) = s(1)'
640	ENDIF
641	IF ( ibc_q_t == 0 ) THEN
642	roben = 's(nzt) = s_top'
643	ELSE
644	roben = 's(nzt) = s(nzt-1) + ds/dz'
645	ENDIF
646	WRITE ( io, 301 ) 's', runten, roben
647	ENDIF
648
649	IF ( use_surface_fluxes ) THEN
650	WRITE ( io, 303 )
651	IF ( constant_heatflux ) THEN
652	WRITE ( io, 306 ) surface_heatflux
653	IF ( random_heatflux ) WRITE ( io, 307 )
654	ENDIF
655	IF ( humidity .AND. constant_waterflux ) THEN
656	WRITE ( io, 311 ) surface_waterflux
657	ENDIF
658	IF ( passive_scalar .AND. constant_waterflux ) THEN
659	WRITE ( io, 313 ) surface_waterflux
660	ENDIF
661	ENDIF
662
663	IF ( use_top_fluxes ) THEN
664	WRITE ( io, 304 )
665	IF ( coupling_mode == 'uncoupled' ) THEN
666	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
667	IF ( constant_top_heatflux ) THEN
668	WRITE ( io, 306 ) top_heatflux
669	ENDIF
670	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
671	WRITE ( io, 316 )
672	ENDIF
673	IF ( ocean .AND. constant_top_salinityflux ) THEN
674	WRITE ( io, 309 ) top_salinityflux
675	ENDIF
676	IF ( humidity .OR. passive_scalar ) THEN
677	WRITE ( io, 315 )
678	ENDIF
679	ENDIF
680
681	IF ( prandtl_layer ) THEN
682	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
683	rif_min, rif_max
684	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
685	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
686	WRITE ( io, 312 )
687	ENDIF
688	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
689	WRITE ( io, 314 )
690	ENDIF
691	ELSE
692	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
693	WRITE ( io, 310 ) rif_min, rif_max
694	ENDIF
695	ENDIF
696
697	WRITE ( io, 317 ) bc_lr, bc_ns
698	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
699	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
700	IF ( turbulent_inflow ) THEN
701	WRITE ( io, 319 ) recycling_width, recycling_plane, &
702	inflow_damping_height, inflow_damping_width
703	ENDIF
704	ENDIF
705
706	!
707	!-- Listing of 1D-profiles
708	WRITE ( io, 325 ) dt_dopr_listing
709	IF ( averaging_interval_pr /= 0.0 ) THEN
710	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
711	ENDIF
712
713	!
714	!-- DATA output
715	WRITE ( io, 330 )
716	IF ( averaging_interval_pr /= 0.0 ) THEN
717	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
718	ENDIF
719
720	!
721	!-- 1D-profiles
722	dopr_chr = 'Profile:'
723	IF ( dopr_n /= 0 ) THEN
724	WRITE ( io, 331 )
725
726	output_format = ''
727	IF ( netcdf_output ) THEN
728	IF ( netcdf_data_format == 1 ) THEN
729	output_format = 'NetCDF classic'
730	ELSE
731	output_format = 'NetCDF 64bit offset'
732	ENDIF
733	ENDIF
734	IF ( profil_output ) THEN
735	IF ( netcdf_output ) THEN
736	output_format = TRIM( output_format ) // ' and profil'
737	ELSE
738	output_format = 'profil'
739	ENDIF
740	ENDIF
741	WRITE ( io, 344 ) output_format
742
743	DO i = 1, dopr_n
744	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
745	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
746	WRITE ( io, 332 ) dopr_chr
747	dopr_chr = ' :'
748	ENDIF
749	ENDDO
750
751	IF ( dopr_chr /= '' ) THEN
752	WRITE ( io, 332 ) dopr_chr
753	ENDIF
754	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
755	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
756	ENDIF
757
758	!
759	!-- 2D-arrays
760	DO av = 0, 1
761
762	i = 1
763	do2d_xy = ''
764	do2d_xz = ''
765	do2d_yz = ''
766	DO WHILE ( do2d(av,i) /= ' ' )
767
768	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
769	do2d_mode = do2d(av,i)(l-1:l)
770
771	SELECT CASE ( do2d_mode )
772	CASE ( 'xy' )
773	ll = LEN_TRIM( do2d_xy )
774	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
775	CASE ( 'xz' )
776	ll = LEN_TRIM( do2d_xz )
777	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
778	CASE ( 'yz' )
779	ll = LEN_TRIM( do2d_yz )
780	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
781	END SELECT
782
783	i = i + 1
784
785	ENDDO
786
787	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
788	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
789	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
790	( netcdf_output .OR. iso2d_output ) ) THEN
791
792	IF ( av == 0 ) THEN
793	WRITE ( io, 334 ) ''
794	ELSE
795	WRITE ( io, 334 ) '(time-averaged)'
796	ENDIF
797
798	IF ( do2d_at_begin ) THEN
799	begin_chr = 'and at the start'
800	ELSE
801	begin_chr = ''
802	ENDIF
803
804	output_format = ''
805	IF ( netcdf_output ) THEN
806	IF ( netcdf_data_format == 1 ) THEN
807	output_format = 'NetCDF classic'
808	ELSEIF ( netcdf_data_format == 2 ) THEN
809	output_format = 'NetCDF 64bit offset'
810	ELSEIF ( netcdf_data_format == 3 ) THEN
811	output_format = 'NetCDF4/HDF5'
812	ELSEIF ( netcdf_data_format == 4 ) THEN
813	output_format = 'NetCDF4/HDF5 clasic'
814	ENDIF
815	ENDIF
816	IF ( iso2d_output ) THEN
817	IF ( netcdf_output ) THEN
818	output_format = TRIM( output_format ) // ' and iso2d'
819	ELSE
820	output_format = 'iso2d'
821	ENDIF
822	ENDIF
823	WRITE ( io, 344 ) output_format
824
825	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
826	i = 1
827	slices = '/'
828	coordinates = '/'
829	!
830	!-- Building strings with index and coordinate informations of the
831	!-- slices
832	DO WHILE ( section(i,1) /= -9999 )
833
834	WRITE (section_chr,'(I5)') section(i,1)
835	section_chr = ADJUSTL( section_chr )
836	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
837
838	IF ( section(i,1) == -1 ) THEN
839	WRITE (coor_chr,'(F10.1)') -1.0
840	ELSE
841	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
842	ENDIF
843	coor_chr = ADJUSTL( coor_chr )
844	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
845
846	i = i + 1
847	ENDDO
848	IF ( av == 0 ) THEN
849	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
850	TRIM( begin_chr ), 'k', TRIM( slices ), &
851	TRIM( coordinates )
852	IF ( skip_time_do2d_xy /= 0.0 ) THEN
853	WRITE ( io, 339 ) skip_time_do2d_xy
854	ENDIF
855	ELSE
856	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
857	TRIM( begin_chr ), averaging_interval, &
858	dt_averaging_input, 'k', TRIM( slices ), &
859	TRIM( coordinates )
860	IF ( skip_time_data_output_av /= 0.0 ) THEN
861	WRITE ( io, 339 ) skip_time_data_output_av
862	ENDIF
863	ENDIF
864
865	ENDIF
866
867	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
868	i = 1
869	slices = '/'
870	coordinates = '/'
871	!
872	!-- Building strings with index and coordinate informations of the
873	!-- slices
874	DO WHILE ( section(i,2) /= -9999 )
875
876	WRITE (section_chr,'(I5)') section(i,2)
877	section_chr = ADJUSTL( section_chr )
878	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
879
880	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
881	coor_chr = ADJUSTL( coor_chr )
882	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
883
884	i = i + 1
885	ENDDO
886	IF ( av == 0 ) THEN
887	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
888	TRIM( begin_chr ), 'j', TRIM( slices ), &
889	TRIM( coordinates )
890	IF ( skip_time_do2d_xz /= 0.0 ) THEN
891	WRITE ( io, 339 ) skip_time_do2d_xz
892	ENDIF
893	ELSE
894	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
895	TRIM( begin_chr ), averaging_interval, &
896	dt_averaging_input, 'j', TRIM( slices ), &
897	TRIM( coordinates )
898	IF ( skip_time_data_output_av /= 0.0 ) THEN
899	WRITE ( io, 339 ) skip_time_data_output_av
900	ENDIF
901	ENDIF
902	ENDIF
903
904	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
905	i = 1
906	slices = '/'
907	coordinates = '/'
908	!
909	!-- Building strings with index and coordinate informations of the
910	!-- slices
911	DO WHILE ( section(i,3) /= -9999 )
912
913	WRITE (section_chr,'(I5)') section(i,3)
914	section_chr = ADJUSTL( section_chr )
915	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
916
917	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
918	coor_chr = ADJUSTL( coor_chr )
919	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
920
921	i = i + 1
922	ENDDO
923	IF ( av == 0 ) THEN
924	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
925	TRIM( begin_chr ), 'i', TRIM( slices ), &
926	TRIM( coordinates )
927	IF ( skip_time_do2d_yz /= 0.0 ) THEN
928	WRITE ( io, 339 ) skip_time_do2d_yz
929	ENDIF
930	ELSE
931	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
932	TRIM( begin_chr ), averaging_interval, &
933	dt_averaging_input, 'i', TRIM( slices ), &
934	TRIM( coordinates )
935	IF ( skip_time_data_output_av /= 0.0 ) THEN
936	WRITE ( io, 339 ) skip_time_data_output_av
937	ENDIF
938	ENDIF
939	ENDIF
940
941	ENDIF
942
943	ENDDO
944
945	!
946	!-- 3d-arrays
947	DO av = 0, 1
948
949	i = 1
950	do3d_chr = ''
951	DO WHILE ( do3d(av,i) /= ' ' )
952
953	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
954	i = i + 1
955
956	ENDDO
957
958	IF ( do3d_chr /= '' ) THEN
959	IF ( av == 0 ) THEN
960	WRITE ( io, 336 ) ''
961	ELSE
962	WRITE ( io, 336 ) '(time-averaged)'
963	ENDIF
964
965	output_format = ''
966	IF ( netcdf_output ) THEN
967	IF ( netcdf_data_format == 1 ) THEN
968	output_format = 'NetCDF classic'
969	ELSEIF ( netcdf_data_format == 2 ) THEN
970	output_format = 'NetCDF 64bit offset'
971	ELSEIF ( netcdf_data_format == 3 ) THEN
972	output_format = 'NetCDF4/HDF5'
973	ELSEIF ( netcdf_data_format == 4 ) THEN
974	output_format = 'NetCDF4/HDF5 clasic'
975	ENDIF
976	ENDIF
977	IF ( avs_output ) THEN
978	IF ( netcdf_output ) THEN
979	output_format = TRIM( output_format ) // ' and avs'
980	ELSE
981	output_format = 'avs'
982	ENDIF
983	ENDIF
984	WRITE ( io, 344 ) output_format
985
986	IF ( do3d_at_begin ) THEN
987	begin_chr = 'and at the start'
988	ELSE
989	begin_chr = ''
990	ENDIF
991	IF ( av == 0 ) THEN
992	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
993	zu(nz_do3d), nz_do3d
994	ELSE
995	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
996	TRIM( begin_chr ), averaging_interval, &
997	dt_averaging_input, zu(nz_do3d), nz_do3d
998	ENDIF
999
1000	IF ( do3d_compress ) THEN
1001	do3d_chr = ''
1002	i = 1
1003	DO WHILE ( do3d(av,i) /= ' ' )
1004
1005	SELECT CASE ( do3d(av,i) )
1006	CASE ( 'u' )
1007	j = 1
1008	CASE ( 'v' )
1009	j = 2
1010	CASE ( 'w' )
1011	j = 3
1012	CASE ( 'p' )
1013	j = 4
1014	CASE ( 'pt' )
1015	j = 5
1016	END SELECT
1017	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1018	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1019	':' // prec // ','
1020	i = i + 1
1021
1022	ENDDO
1023	WRITE ( io, 338 ) do3d_chr
1024
1025	ENDIF
1026
1027	IF ( av == 0 ) THEN
1028	IF ( skip_time_do3d /= 0.0 ) THEN
1029	WRITE ( io, 339 ) skip_time_do3d
1030	ENDIF
1031	ELSE
1032	IF ( skip_time_data_output_av /= 0.0 ) THEN
1033	WRITE ( io, 339 ) skip_time_data_output_av
1034	ENDIF
1035	ENDIF
1036
1037	ENDIF
1038
1039	ENDDO
1040
1041	!
1042	!-- masked arrays
1043	IF ( masks > 0 ) WRITE ( io, 345 ) &
1044	mask_scale_x, mask_scale_y, mask_scale_z
1045	DO mid = 1, masks
1046	DO av = 0, 1
1047
1048	i = 1
1049	domask_chr = ''
1050	DO WHILE ( domask(mid,av,i) /= ' ' )
1051	domask_chr = TRIM( domask_chr ) // ' ' // &
1052	TRIM( domask(mid,av,i) ) // ','
1053	i = i + 1
1054	ENDDO
1055
1056	IF ( domask_chr /= '' ) THEN
1057	IF ( av == 0 ) THEN
1058	WRITE ( io, 346 ) '', mid
1059	ELSE
1060	WRITE ( io, 346 ) ' (time-averaged)', mid
1061	ENDIF
1062
1063	output_format = ''
1064	IF ( netcdf_output ) THEN
1065	IF ( netcdf_data_format == 1 ) THEN
1066	output_format = 'NetCDF classic'
1067	ELSEIF ( netcdf_data_format == 2 ) THEN
1068	output_format = 'NetCDF 64bit offset'
1069	ELSEIF ( netcdf_data_format == 3 ) THEN
1070	output_format = 'NetCDF4/HDF5'
1071	ELSEIF ( netcdf_data_format == 4 ) THEN
1072	output_format = 'NetCDF4/HDF5 clasic'
1073	ENDIF
1074	ENDIF
1075	WRITE ( io, 344 ) output_format
1076
1077	IF ( av == 0 ) THEN
1078	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1079	ELSE
1080	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1081	averaging_interval, dt_averaging_input
1082	ENDIF
1083
1084	IF ( av == 0 ) THEN
1085	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1086	WRITE ( io, 339 ) skip_time_domask(mid)
1087	ENDIF
1088	ELSE
1089	IF ( skip_time_data_output_av /= 0.0 ) THEN
1090	WRITE ( io, 339 ) skip_time_data_output_av
1091	ENDIF
1092	ENDIF
1093	!
1094	!-- output locations
1095	DO dim = 1, 3
1096	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1097	count = 0
1098	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1099	count = count + 1
1100	ENDDO
1101	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1102	mask(mid,dim,:count)
1103	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1104	mask_loop(mid,dim,2) < 0.0 .AND. &
1105	mask_loop(mid,dim,3) == 0.0 ) THEN
1106	WRITE ( io, 350 ) dir(dim), dir(dim)
1107	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1108	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1109	mask_loop(mid,dim,1:2)
1110	ELSE
1111	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1112	mask_loop(mid,dim,1:3)
1113	ENDIF
1114	ENDDO
1115	ENDIF
1116
1117	ENDDO
1118	ENDDO
1119
1120	!
1121	!-- Timeseries
1122	IF ( dt_dots /= 9999999.9 ) THEN
1123	WRITE ( io, 340 )
1124
1125	output_format = ''
1126	IF ( netcdf_output ) THEN
1127	IF ( netcdf_data_format == 1 ) THEN
1128	output_format = 'NetCDF classic'
1129	ELSE
1130	output_format = 'NetCDF 64bit offset'
1131	ENDIF
1132	ENDIF
1133	IF ( profil_output ) THEN
1134	IF ( netcdf_output ) THEN
1135	output_format = TRIM( output_format ) // ' and profil'
1136	ELSE
1137	output_format = 'profil'
1138	ENDIF
1139	ENDIF
1140	WRITE ( io, 344 ) output_format
1141	WRITE ( io, 341 ) dt_dots
1142	ENDIF
1143
1144	#if defined( __dvrp_graphics )
1145	!
1146	!-- Dvrp-output
1147	IF ( dt_dvrp /= 9999999.9 ) THEN
1148	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1149	TRIM( dvrp_username ), TRIM( dvrp_directory )
1150	i = 1
1151	l = 0
1152	m = 0
1153	DO WHILE ( mode_dvrp(i) /= ' ' )
1154	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1155	READ ( mode_dvrp(i), '(10X,I2)' ) j
1156	l = l + 1
1157	IF ( do3d(0,j) /= ' ' ) THEN
1158	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1159	isosurface_color(:,l)
1160	ENDIF
1161	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1162	READ ( mode_dvrp(i), '(6X,I2)' ) j
1163	m = m + 1
1164	IF ( do2d(0,j) /= ' ' ) THEN
1165	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1166	slicer_range_limits_dvrp(:,m)
1167	ENDIF
1168	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1169	WRITE ( io, 363 ) dvrp_psize
1170	IF ( particle_dvrpsize /= 'none' ) THEN
1171	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1172	dvrpsize_interval
1173	ENDIF
1174	IF ( particle_color /= 'none' ) THEN
1175	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1176	color_interval
1177	ENDIF
1178	ENDIF
1179	i = i + 1
1180	ENDDO
1181
1182	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1183	superelevation_y, superelevation, clip_dvrp_l, &
1184	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1185
1186	IF ( TRIM( topography ) /= 'flat' ) THEN
1187	WRITE ( io, 366 ) topography_color
1188	IF ( cluster_size > 1 ) THEN
1189	WRITE ( io, 367 ) cluster_size
1190	ENDIF
1191	ENDIF
1192
1193	ENDIF
1194	#endif
1195
1196	#if defined( __spectra )
1197	!
1198	!-- Spectra output
1199	IF ( dt_dosp /= 9999999.9 ) THEN
1200	WRITE ( io, 370 )
1201
1202	output_format = ''
1203	IF ( netcdf_output ) THEN
1204	IF ( netcdf_data_format == 1 ) THEN
1205	output_format = 'NetCDF classic'
1206	ELSE
1207	output_format = 'NetCDF 64bit offset'
1208	ENDIF
1209	ENDIF
1210	IF ( profil_output ) THEN
1211	IF ( netcdf_output ) THEN
1212	output_format = TRIM( output_format ) // ' and profil'
1213	ELSE
1214	output_format = 'profil'
1215	ENDIF
1216	ENDIF
1217	WRITE ( io, 344 ) output_format
1218	WRITE ( io, 371 ) dt_dosp
1219	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1220	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1221	( spectra_direction(i), i = 1,10 ), &
1222	( comp_spectra_level(i), i = 1,100 ), &
1223	( plot_spectra_level(i), i = 1,100 ), &
1224	averaging_interval_sp, dt_averaging_input_pr
1225	ENDIF
1226	#endif
1227
1228	WRITE ( io, 99 )
1229
1230	!
1231	!-- Physical quantities
1232	WRITE ( io, 400 )
1233
1234	!
1235	!-- Geostrophic parameters
1236	WRITE ( io, 410 ) omega, phi, f, fs
1237
1238	!
1239	!-- Other quantities
1240	WRITE ( io, 411 ) g
1241	IF ( use_reference ) THEN
1242	IF ( ocean ) THEN
1243	WRITE ( io, 412 ) prho_reference
1244	ELSE
1245	WRITE ( io, 413 ) pt_reference
1246	ENDIF
1247	ENDIF
1248
1249	!
1250	!-- Cloud physics parameters
1251	IF ( cloud_physics ) THEN
1252	WRITE ( io, 415 )
1253	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1254	ENDIF
1255
1256	!-- Profile of the geostrophic wind (component ug)
1257	!-- Building output strings
1258	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1259	gradients = '------'
1260	slices = ' 0'
1261	coordinates = ' 0.0'
1262	i = 1
1263	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1264
1265	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1266	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1267
1268	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1269	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1270
1271	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1272	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1273
1274	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1275	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1276
1277	IF ( i == 10 ) THEN
1278	EXIT
1279	ELSE
1280	i = i + 1
1281	ENDIF
1282
1283	ENDDO
1284
1285	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1286	TRIM( gradients ), TRIM( slices )
1287
1288	!-- Profile of the geostrophic wind (component vg)
1289	!-- Building output strings
1290	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1291	gradients = '------'
1292	slices = ' 0'
1293	coordinates = ' 0.0'
1294	i = 1
1295	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1296
1297	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1298	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1299
1300	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1301	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1302
1303	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1304	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1305
1306	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1307	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1308
1309	IF ( i == 10 ) THEN
1310	EXIT
1311	ELSE
1312	i = i + 1
1313	ENDIF
1314
1315	ENDDO
1316
1317	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1318	TRIM( gradients ), TRIM( slices )
1319
1320	!
1321	!-- Initial wind profiles
1322	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1323
1324	!
1325	!-- Initial temperature profile
1326	!-- Building output strings, starting with surface temperature
1327	WRITE ( temperatures, '(F6.2)' ) pt_surface
1328	gradients = '------'
1329	slices = ' 0'
1330	coordinates = ' 0.0'
1331	i = 1
1332	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1333
1334	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1335	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1336
1337	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1338	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1339
1340	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1341	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1342
1343	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1344	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1345
1346	IF ( i == 10 ) THEN
1347	EXIT
1348	ELSE
1349	i = i + 1
1350	ENDIF
1351
1352	ENDDO
1353
1354	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1355	TRIM( gradients ), TRIM( slices )
1356
1357	!
1358	!-- Initial humidity profile
1359	!-- Building output strings, starting with surface humidity
1360	IF ( humidity .OR. passive_scalar ) THEN
1361	WRITE ( temperatures, '(E8.1)' ) q_surface
1362	gradients = '--------'
1363	slices = ' 0'
1364	coordinates = ' 0.0'
1365	i = 1
1366	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1367
1368	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1369	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1370
1371	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1372	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1373
1374	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1375	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1376
1377	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1378	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1379
1380	IF ( i == 10 ) THEN
1381	EXIT
1382	ELSE
1383	i = i + 1
1384	ENDIF
1385
1386	ENDDO
1387
1388	IF ( humidity ) THEN
1389	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1390	TRIM( gradients ), TRIM( slices )
1391	ELSE
1392	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1393	TRIM( gradients ), TRIM( slices )
1394	ENDIF
1395	ENDIF
1396
1397	!
1398	!-- Initial salinity profile
1399	!-- Building output strings, starting with surface salinity
1400	IF ( ocean ) THEN
1401	WRITE ( temperatures, '(F6.2)' ) sa_surface
1402	gradients = '------'
1403	slices = ' 0'
1404	coordinates = ' 0.0'
1405	i = 1
1406	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1407
1408	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1409	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1410
1411	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1412	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1413
1414	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1415	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1416
1417	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1418	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1419
1420	IF ( i == 10 ) THEN
1421	EXIT
1422	ELSE
1423	i = i + 1
1424	ENDIF
1425
1426	ENDDO
1427
1428	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1429	TRIM( gradients ), TRIM( slices )
1430	ENDIF
1431
1432	!
1433	!-- Profile for the large scale vertial velocity
1434	!-- Building output strings, starting with surface value
1435	IF ( large_scale_subsidence ) THEN
1436	temperatures = ' 0.0'
1437	gradients = '------'
1438	slices = ' 0'
1439	coordinates = ' 0.0'
1440	i = 1
1441	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1442
1443	WRITE (coor_chr,'(E10.2,7X)') &
1444	w_subs(subs_vertical_gradient_level_i(i))
1445	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1446
1447	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1448	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1449
1450	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1451	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1452
1453	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1454	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1455
1456	IF ( i == 10 ) THEN
1457	EXIT
1458	ELSE
1459	i = i + 1
1460	ENDIF
1461
1462	ENDDO
1463
1464	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1465	TRIM( gradients ), TRIM( slices )
1466	ENDIF
1467
1468	!
1469	!-- Cloud physcis parameters / quantities / numerical methods
1470	WRITE ( io, 430 )
1471	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
1472	WRITE ( io, 431 )
1473	ELSEIF ( humidity .AND. cloud_physics ) THEN
1474	WRITE ( io, 432 )
1475	IF ( radiation ) WRITE ( io, 132 )
1476	IF ( precipitation ) WRITE ( io, 133 )
1477	ELSEIF ( humidity .AND. cloud_droplets ) THEN
1478	WRITE ( io, 433 )
1479	IF ( curvature_solution_effects ) WRITE ( io, 434 )
1480	ENDIF
1481
1482	!
1483	!-- LES / turbulence parameters
1484	WRITE ( io, 450 )
1485
1486	!--
1487	! ... LES-constants used must still be added here
1488	!--
1489	IF ( constant_diffusion ) THEN
1490	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1491	prandtl_number
1492	ENDIF
1493	IF ( .NOT. constant_diffusion) THEN
1494	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1495	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1496	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1497	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1498	ENDIF
1499
1500	!
1501	!-- Special actions during the run
1502	WRITE ( io, 470 )
1503	IF ( create_disturbances ) THEN
1504	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1505	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1506	zu(disturbance_level_ind_t), disturbance_level_ind_t
1507	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1508	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1509	ELSE
1510	WRITE ( io, 473 ) disturbance_energy_limit
1511	ENDIF
1512	WRITE ( io, 474 ) TRIM( random_generator )
1513	ENDIF
1514	IF ( pt_surface_initial_change /= 0.0 ) THEN
1515	WRITE ( io, 475 ) pt_surface_initial_change
1516	ENDIF
1517	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1518	WRITE ( io, 476 ) q_surface_initial_change
1519	ENDIF
1520	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1521	WRITE ( io, 477 ) q_surface_initial_change
1522	ENDIF
1523
1524	IF ( particle_advection ) THEN
1525	!
1526	!-- Particle attributes
1527	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1528	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1529	end_time_prel, dt_sort_particles
1530	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1531	IF ( random_start_position ) WRITE ( io, 481 )
1532	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1533	WRITE ( io, 495 ) total_number_of_particles
1534	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
1535	WRITE ( io, 483 ) maximum_number_of_tailpoints
1536	IF ( minimum_tailpoint_distance /= 0 ) THEN
1537	WRITE ( io, 484 ) total_number_of_tails, &
1538	minimum_tailpoint_distance, &
1539	maximum_tailpoint_age
1540	ENDIF
1541	ENDIF
1542	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1543	WRITE ( io, 485 ) dt_write_particle_data
1544	output_format = ''
1545	IF ( netcdf_output ) THEN
1546	IF ( netcdf_data_format > 1 ) THEN
1547	output_format = 'netcdf (64 bit offset) and binary'
1548	ELSE
1549	output_format = 'netcdf and binary'
1550	ENDIF
1551	ELSE
1552	output_format = 'binary'
1553	ENDIF
1554	WRITE ( io, 344 ) output_format
1555	ENDIF
1556	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1557	IF ( write_particle_statistics ) WRITE ( io, 486 )
1558
1559	WRITE ( io, 487 ) number_of_particle_groups
1560
1561	DO i = 1, number_of_particle_groups
1562	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1563	WRITE ( io, 490 ) i, 0.0
1564	WRITE ( io, 492 )
1565	ELSE
1566	WRITE ( io, 490 ) i, radius(i)
1567	IF ( density_ratio(i) /= 0.0 ) THEN
1568	WRITE ( io, 491 ) density_ratio(i)
1569	ELSE
1570	WRITE ( io, 492 )
1571	ENDIF
1572	ENDIF
1573	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1574	pdx(i), pdy(i), pdz(i)
1575	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1576	ENDDO
1577
1578	ENDIF
1579
1580
1581	!
1582	!-- Parameters of 1D-model
1583	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1584	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1585	mixing_length_1d, dissipation_1d
1586	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1587	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1588	ENDIF
1589	ENDIF
1590
1591	!
1592	!-- User-defined informations
1593	CALL user_header( io )
1594
1595	WRITE ( io, 99 )
1596
1597	!
1598	!-- Write buffer contents to disc immediately
1599	CALL local_flush( io )
1600
1601	!
1602	!-- Here the FORMATs start
1603
1604	99 FORMAT (1X,78('-'))
1605	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1606	1X,'* ',A,' *',9X,A/ &
1607	1X,'***************************',9X,42('-'))
1608	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1609	37X,42('-'))
1610	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1611	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1612	' Run on host: ',A10)
1613	#if defined( __parallel )
1614	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1615	')',1X,A)
1616	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1617	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1618	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1619	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1620	37X,'because the job is running on an SMP-cluster')
1621	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1622	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1623	#endif
1624	110 FORMAT (/' Numerical Schemes:'/ &
1625	' -----------------'/)
1626	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1627	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1628	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1629	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1630	' or Upstream')
1631	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1632	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1633	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1634	' or Upstream')
1635	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1636	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1637	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1638	' Translation velocity = ',A/ &
1639	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1640	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1641	' of timestep changes)')
1642	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1643	' timestep changes')
1644	122 FORMAT (' --> Time differencing scheme: ',A)
1645	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1646	' maximum damping coefficient: ',F5.3, ' 1/s')
1647	124 FORMAT (' Spline-overshoots are being suppressed')
1648	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1649	' of'/ &
1650	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1651	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1652	' of'/ &
1653	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1654	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1655	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1656	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1657	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1658	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1659	130 FORMAT (' --> Additional prognostic equation for the total water content')
1660	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
1661	' effective emissivity scheme')
1662	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
1663	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1664	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1665	A,'-cycle)'/ &
1666	' number of grid levels: ',I2/ &
1667	' Gauss-Seidel red/black iterations: ',I2)
1668	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1669	I3,')')
1670	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1671	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1672	I3,')'/ &
1673	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1674	I3,')')
1675	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1676	139 FORMAT (' --> Loop optimization method: ',A)
1677	140 FORMAT (' maximum residual allowed: ',E10.3)
1678	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1679	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1680	'step')
1681	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1682	'kinetic energy')
1683	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1684	'conserved'/ &
1685	' using the ',A,' mode')
1686	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1687	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1688	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1689	/' starting from dp_level_b =', F8.3, 'm', A /)
1690	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1691	'prognostic equation for')
1692	154 FORMAT (' the potential temperature')
1693	200 FORMAT (//' Run time and time step information:'/ &
1694	' ----------------------------------'/)
1695	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1696	' CFL-factor: ',F4.2)
1697	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1698	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1699	' End time: ',F9.3,' s')
1700	204 FORMAT ( A,F9.3,' s')
1701	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1702	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1703	' CPU-time used: ',F9.3,' s per timestep: ', &
1704	' ',F9.3,' s'/ &
1705	' per second of simulated tim', &
1706	'e: ',F9.3,' s')
1707	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1708	250 FORMAT (//' Computational grid and domain size:'/ &
1709	' ----------------------------------'// &
1710	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1711	' m dz = ',F7.3,' m'/ &
1712	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1713	' m z(u) = ',F10.3,' m'/)
1714	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1715	' factor: ',F5.3/ &
1716	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1717	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1718	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1719	255 FORMAT (' Subdomains have equal size')
1720	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1721	'have smaller sizes'/ &
1722	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1723	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1724	' degrees')
1725	270 FORMAT (//' Topography informations:'/ &
1726	' -----------------------'// &
1727	1X,'Topography: ',A)
1728	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1729	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1730	' / ',I4)
1731	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1732	' direction' / &
1733	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1734	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1735	278 FORMAT (' Topography grid definition convention:'/ &
1736	' cell edge (staggered grid points'/ &
1737	' (u in x-direction, v in y-direction))' /)
1738	279 FORMAT (' Topography grid definition convention:'/ &
1739	' cell center (scalar grid points)' /)
1740	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1741	' ------------------------------'// &
1742	' Canopy mode: ', A / &
1743	' Canopy top: ',I4 / &
1744	' Leaf drag coefficient: ',F6.2 /)
1745	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1746	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1747	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1748	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1749	' Height: ',A,' m'/ &
1750	' Leaf area density: ',A,' m2/m3'/ &
1751	' Gradient: ',A,' m2/m4'/ &
1752	' Gridpoint: ',A)
1753
1754	300 FORMAT (//' Boundary conditions:'/ &
1755	' -------------------'// &
1756	' p uv ', &
1757	' pt'// &
1758	' B. bound.: ',A/ &
1759	' T. bound.: ',A)
1760	301 FORMAT (/' ',A// &
1761	' B. bound.: ',A/ &
1762	' T. bound.: ',A)
1763	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1764	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1765	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1766	'computational u,v-level:'// &
1767	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1768	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1769	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1770	307 FORMAT (' Heatflux has a random normal distribution')
1771	308 FORMAT (' Predefined surface temperature')
1772	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1773	310 FORMAT (//' 1D-Model:'// &
1774	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1775	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1776	312 FORMAT (' Predefined surface humidity')
1777	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1778	314 FORMAT (' Predefined scalar value at the surface')
1779	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1780	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1781	'atmosphere model')
1782	317 FORMAT (//' Lateral boundaries:'/ &
1783	' left/right: ',A/ &
1784	' north/south: ',A)
1785	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1786	'max =',F5.1,' m**2/s')
1787	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1788	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1789	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1790	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1791	' v: ',F9.6,' m2/s2')
1792	325 FORMAT (//' List output:'/ &
1793	' -----------'// &
1794	' 1D-Profiles:'/ &
1795	' Output every ',F8.2,' s')
1796	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1797	' Averaging input every ',F8.2,' s')
1798	330 FORMAT (//' Data output:'/ &
1799	' -----------'/)
1800	331 FORMAT (/' 1D-Profiles:')
1801	332 FORMAT (/' ',A)
1802	333 FORMAT (' Output every ',F8.2,' s',/ &
1803	' Time averaged over ',F8.2,' s'/ &
1804	' Averaging input every ',F8.2,' s')
1805	334 FORMAT (/' 2D-Arrays',A,':')
1806	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1807	' Output every ',F8.2,' s ',A/ &
1808	' Cross sections at ',A1,' = ',A/ &
1809	' scalar-coordinates: ',A,' m'/)
1810	336 FORMAT (/' 3D-Arrays',A,':')
1811	337 FORMAT (/' Arrays: ',A/ &
1812	' Output every ',F8.2,' s ',A/ &
1813	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1814	338 FORMAT (' Compressed data output'/ &
1815	' Decimal precision: ',A/)
1816	339 FORMAT (' No output during initial ',F8.2,' s')
1817	340 FORMAT (/' Time series:')
1818	341 FORMAT (' Output every ',F8.2,' s'/)
1819	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1820	' Output every ',F8.2,' s ',A/ &
1821	' Time averaged over ',F8.2,' s'/ &
1822	' Averaging input every ',F8.2,' s'/ &
1823	' Cross sections at ',A1,' = ',A/ &
1824	' scalar-coordinates: ',A,' m'/)
1825	343 FORMAT (/' Arrays: ',A/ &
1826	' Output every ',F8.2,' s ',A/ &
1827	' Time averaged over ',F8.2,' s'/ &
1828	' Averaging input every ',F8.2,' s'/ &
1829	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1830	344 FORMAT (' Output format: ',A/)
1831	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1832	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1833	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1834	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1835	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1836	347 FORMAT (' Variables: ',A/ &
1837	' Output every ',F8.2,' s')
1838	348 FORMAT (' Variables: ',A/ &
1839	' Output every ',F8.2,' s'/ &
1840	' Time averaged over ',F8.2,' s'/ &
1841	' Averaging input every ',F8.2,' s')
1842	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1843	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1844	13(' ',8(F8.2,',')/) )
1845	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1846	'all gridpoints along ',A,'-direction (default).' )
1847	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1848	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1849	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1850	#if defined( __dvrp_graphics )
1851	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1852	' Output every ',F7.1,' s'/ &
1853	' Output mode: ',A/ &
1854	' Host / User: ',A,' / ',A/ &
1855	' Directory: ',A// &
1856	' The sequence contains:')
1857	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1858	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1859	362 FORMAT (/' Slicer plane ',A/ &
1860	' Slicer limits: [',F6.2,',',F6.2,']')
1861	363 FORMAT (/' Particles'/ &
1862	' particle size: ',F7.2,' m')
1863	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1864	F6.2,',',F6.2,']')
1865	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1866	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1867	')'/ &
1868	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1869	' from y = ',F9.1,' m to y = ',F9.1,' m')
1870	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1871	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1872	#endif
1873	#if defined( __spectra )
1874	370 FORMAT (' Spectra:')
1875	371 FORMAT (' Output every ',F7.1,' s'/)
1876	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1877	' Directions: ', 10(A5,',')/ &
1878	' height levels k = ', 20(I3,',')/ &
1879	' ', 20(I3,',')/ &
1880	' ', 20(I3,',')/ &
1881	' ', 20(I3,',')/ &
1882	' ', 19(I3,','),I3,'.'/ &
1883	' height levels selected for standard plot:'/ &
1884	' k = ', 20(I3,',')/ &
1885	' ', 20(I3,',')/ &
1886	' ', 20(I3,',')/ &
1887	' ', 20(I3,',')/ &
1888	' ', 19(I3,','),I3,'.'/ &
1889	' Time averaged over ', F7.1, ' s,' / &
1890	' Profiles for the time averaging are taken every ', &
1891	F6.1,' s')
1892	#endif
1893	400 FORMAT (//' Physical quantities:'/ &
1894	' -------------------'/)
1895	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1896	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1897	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1898	' f* = ',F9.6,' 1/s')
1899	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1900	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1901	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1902	415 FORMAT (/' Cloud physics parameters:'/ &
1903	' ------------------------'/)
1904	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1905	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1906	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1907	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1908	' Vapourization heat : L_v = ',E8.2,' J/kg')
1909	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1910	' Height: ',A,' m'/ &
1911	' Temperature: ',A,' K'/ &
1912	' Gradient: ',A,' K/100m'/ &
1913	' Gridpoint: ',A)
1914	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1915	' Height: ',A,' m'/ &
1916	' Humidity: ',A,' kg/kg'/ &
1917	' Gradient: ',A,' (kg/kg)/100m'/ &
1918	' Gridpoint: ',A)
1919	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1920	' Height: ',A,' m'/ &
1921	' Scalar concentration: ',A,' kg/m**3'/ &
1922	' Gradient: ',A,' (kg/m**3)/100m'/ &
1923	' Gridpoint: ',A)
1924	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1925	' Height: ',A,' m'/ &
1926	' ug: ',A,' m/s'/ &
1927	' Gradient: ',A,' 1/100s'/ &
1928	' Gridpoint: ',A)
1929	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1930	' Height: ',A,' m'/ &
1931	' vg: ',A,' m/s'/ &
1932	' Gradient: ',A,' 1/100s'/ &
1933	' Gridpoint: ',A)
1934	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1935	' Height: ',A,' m'/ &
1936	' Salinity: ',A,' psu'/ &
1937	' Gradient: ',A,' psu/100m'/ &
1938	' Gridpoint: ',A)
1939	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1940	' Height: ',A,' m'/ &
1941	' w_subs: ',A,' m/s'/ &
1942	' Gradient: ',A,' (m/s)/100m'/ &
1943	' Gridpoint: ',A)
1944	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1945	' profiles')
1946	430 FORMAT (//' Cloud physics quantities / methods:'/ &
1947	' ----------------------------------'/)
1948	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
1949	'on)')
1950	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
1951	' total water content is used.'/ &
1952	' Condensation is parameterized via 0% - or 100% scheme.')
1953	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
1954	'icle model')
1955	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
1956	' droplets < 1.0E-6 m')
1957	450 FORMAT (//' LES / Turbulence quantities:'/ &
1958	' ---------------------------'/)
1959	451 FORMAT (' Diffusion coefficients are constant:'/ &
1960	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1961	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1962	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1963	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1964	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1965	470 FORMAT (//' Actions during the simulation:'/ &
1966	' -----------------------------'/)
1967	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1968	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1969	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1970	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1971	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1972	' to i/j =',I4)
1973	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1974	1X,F5.3, ' m2/s2')
1975	474 FORMAT (' Random number generator used : ',A/)
1976	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1977	'respectively, if'/ &
1978	' the value is negative) by ',F5.2,' K at the beginning of the',&
1979	' 3D-simulation'/)
1980	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1981	'respectively, if the'/ &
1982	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1983	' the 3D-simulation'/)
1984	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1985	'respectively, if the'/ &
1986	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1987	' the 3D-simulation'/)
1988	480 FORMAT (' Particles:'/ &
1989	' ---------'// &
1990	' Particle advection is active (switched on at t = ', F7.1, &
1991	' s)'/ &
1992	' Start of new particle generations every ',F6.1,' s'/ &
1993	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1994	' bottom: ', A, ' top: ', A/&
1995	' Maximum particle age: ',F9.1,' s'/ &
1996	' Advection stopped at t = ',F9.1,' s'/ &
1997	' Particles are sorted every ',F9.1,' s'/)
1998	481 FORMAT (' Particles have random start positions'/)
1999	482 FORMAT (' Particles are advected only horizontally'/)
2000	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
2001	484 FORMAT (' Number of tails of the total domain: ',I10/ &
2002	' Minimum distance between tailpoints: ',F8.2,' m'/ &
2003	' Maximum age of the end of the tail: ',F8.2,' s')
2004	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
2005	486 FORMAT (' Particle statistics are written on file'/)
2006	487 FORMAT (' Number of particle groups: ',I2/)
2007	488 FORMAT (' SGS velocity components are used for particle advection'/ &
2008	' minimum timestep for advection: ', F7.5/)
2009	489 FORMAT (' Number of particles simultaneously released at each ', &
2010	'point: ', I5/)
2011	490 FORMAT (' Particle group ',I2,':'/ &
2012	' Particle radius: ',E10.3, 'm')
2013	491 FORMAT (' Particle inertia is activated'/ &
2014	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
2015	492 FORMAT (' Particles are advected only passively (no inertia)'/)
2016	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
2017	' y:',F8.1,' - ',F8.1,' m'/&
2018	' z:',F8.1,' - ',F8.1,' m'/&
2019	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
2020	' m dz = ',F8.1,' m'/)
2021	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2022	F8.2,' s'/)
2023	495 FORMAT (' Number of particles in total domain: ',I10/)
2024	500 FORMAT (//' 1D-Model parameters:'/ &
2025	' -------------------'// &
2026	' Simulation time: ',F8.1,' s'/ &
2027	' Run-controll output every: ',F8.1,' s'/ &
2028	' Vertical profile output every: ',F8.1,' s'/ &
2029	' Mixing length calculation: ',A/ &
2030	' Dissipation calculation: ',A/)
2031	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2032	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2033	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2034
2035
2036	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |