Home

Context Navigation

source: palm/trunk/SCRIPTS/subjob @ 291

Last change on this file since 291 was 291, checked in by raasch, 16 years ago
changes for coupling with independent precursor runs; z_i calculation with Sullivan criterion
Property svn:keywords set to `Id Rev`
File size: 41.4 KB

Line
1	#!/bin/ksh
2	# subjob - Plot-Shellskript Version: @(#)SUBJOB 1.0
3	# $Id: subjob 291 2009-04-16 12:07:26Z raasch $
4
5	# Prozedur zum automatischen Generieren von Batch-Jobs, die unter NQS
6	# laufen sollen und deren Ergebnis (Dayfile) zum Job-generierenden
7	# Host zurueckgeschickt werden sollen
8
9
10	# letzte Aenderung:
11	# 29/06/94 - Siggi - Beginn mit Erstellung der Originalversion
12	# 08/07/94 - Siggi - Originalversion abgeschlossen (Version 1.0)
13	# 06/02/98 - Siggi - berte validiert
14	# 27/01/01 - Siggi - ground.yonsei.ac.kr validiert, Jobs zur T3E in Korea
15	# moeglich
16	# 08/02/01 - Siggi - alle subjob-Meldungen ins englische uebersetzt
17	# 25/05/02 - Siggi - Unterstuetzung des LoadLeveler
18	# 30/05/02 - Siggi - Validierung fuer ibm-Rechner in Seoul (nobel) sowie
19	# allgemeine Anpassungen fuer ibm-Rechner
20	# 15/10/02 - Siggi - Neue Default-Jobklasse (p_normal) fuer IBM in Seoul
21	# Ruecktransfer des Jobprotokolls fuer diese
22	# Maschine abgeschaltet
23	# 31/10/02 - Siggi - berni validiert
24	# 06/11/02 - Siggi - Neue Jobklassen auf ibmb und ibmh
25	# 08/11/02 - Siggi - quanero validiert
26	# 11/12/02 - Siggi - Notification fuer Transfer-Jobs abgeschaltet
27	# 23/01/03 - Siggi - hostname nobel changed to nobela
28	# 06/02/03 - Siggi - gregale validated
29	# 12/02/03 - Siggi - orkan and maestro validated
30	# 21/02/03 - Siggi - all nobel nodes in Seoul validated
31	# 12/03/03 - Siggi - nec at DKRZ validated
32	# 13/03/03 - Siggi - new nqs resource variable Memory
33	# 07/04/03 - Siggi - processor request option -c on nech needs tasks per
34	# node
35	# 11/04/03 - Siggi - network on ibms has attribute "shared"
36	# 31/07/03 - Siggi - nqs2 on nech implemented (provisional: -h nech2)
37	# cxxl added to ibmh
38	# 29/08/03 - Siggi - changes in job queues and communication system on
39	# ibms
40	# 24/10/03 - Siggi - using alternate hanni address 130.75.4.2
41	# 30/10/03 - Siggi - nech is not supported any more
42	# 10/11/03 - Siggi - nech2 renamed to nech
43	# 20/11/03 - Siggi - submit command on nech changed from qsub.test to qsub
44	# 29/03/04 - Siggi - ground not supported any more, gfdl3 validated
45	# 31/03/04 - Siggi - new option -N for node usage
46	# 12/04/04 - Siggi - scp2 instead of scp used for transfer from decalpha
47	# due to error in ssh installation (otherwise a prompt
48	# for the password appears)
49	# 23/07/04 - Siggi - changes due to the new berni configuration
50	# (federation switch)
51	# 01/09/04 - Gerald new job-classes on hanni
52	# 08/09/04 - Siggi - hanni IP address changed to 130.75.4.10
53	# 23/11/04 - Siggi - new job class cdata on hanni and berni
54	# 03/12/04 - Siggi - notification on ibm switched of in case of
55	# delete_dayfile = true, node usage in cdev set to
56	# shared
57	# 16/02/05 - Gerald hababai validated
58	# 29/03/05 - Micha - new job class channi on hanni
59	# 11/05/05 - Siggi - ConsumableMemory is now required as resource keyword
60	# on ibms
61	# 24/05/05 - Siggi - Default queue on ibms changed from p_normal_1.3 to
62	# p_normal
63	# 30/06/05 - Siggi - network changed for queue cdev from "us" to "ip"
64	# 12/07/05 - Siggi - in network.mpi on ibmh/ibmb "csss" changed to
65	# "sn_all", new job class cexp
66	# 08/09/05 - Siggi - IP-address of gfdl3 changed
67	# 31/10/05 - Siggi - new job class pp on hurricane, serial jobs on
68	# hurricane (with -X0)
69	# 01/11/05 - Siggi - missing queue for jobs submitted on nech (for nech)
70	# added
71	# 30/12/05 - Siggi - change of IP adresses in subnet 130.75.105
72	# 09/02/06 - Siggi - ibmy admitted
73	# 10/02/06 - Siggi - scp2 changed to /bin/scp on decalpha
74	# 13/04/06 - Siggi - ostria admitted
75	# 18/04/06 - Siggi - new option -O for OpenMP usage
76	# 24/05/06 - Siggi - lctit admitted, ftpjob renamed scpjob
77	# 25/07/06 - Siggi - gfdl5 (ibmy) admitted for submitting jobs
78	# 27/09/06 - Siggi - breg/hreg extended with berni/hanni
79	# 25/10/06 - Siggi - data_limit set to 1.76 GByte on hanni and berni
80	# 28/11/06 - Siggi - levanto admitted
81	# 13/02/07 - Siggi - hpmuk releated code removed
82	# 01/03/07 - Siggi - adjustments for RIAM machines gate and NEC-SX8 (n-sx)
83	# 12/04/07 - Siggi - option -f (filetransfer protocol) removed, scp only
84	# 27/07/07 - Siggi - autan admitted
85	# 03/08/07 - Marcus- lcfimm admitted
86	# 08/10/07 - Siggi - further job classes added for hanni (csoloh...)
87	# 15/10/07 - Siggi - preliminary adjustments for lctit based on Jin's
88	# suggestions
89	# 19/10/07 - Marcus- add new optional argument -g group_number
90	# 19/10/07 - Siggi - a ";" was missing in the last change done by Marcus
91	# 30/10/07 - Marcus- further adjustments for queues on lctit
92	# 15/05/08 - Siggi - adjustments for lcxt4 (Bergen Center for Computational
93	# Science)
94	# 14/07/08 - Siggi - adjustments for lcsgih
95	# 23/09/08 - Gerald- paesano admitted
96	# 02/10/08 - Siggi - PBS adjustments for lcxt4
97	# 02/03/09 - Siggi - Adjustments for new NEC-SX9 at RIAM
98
99
100
101	# VARIABLENVEREINBARUNGEN + DEFAULTWERTE
102	delete_dayfile=false
103	group_number=none
104	locat=normal
105	no_default_queue=none
106	no_submit=false
107	job_catalog="~/job_queue"
108	job_name=none
109	local_user=$LOGNAME
110	node_usage=shared
111	numprocs=1
112	punkte="..........................................................."
113	submcom=qsub
114	queue=default
115	remote_host=none
116	remote_user=""
117	verify=true
118
119	typeset -i cputime=0 memory=0 Memory=0 minuten resttime sekunden stunden
120	typeset -i inumprocs nodes=0 tasks_per_node=0 threads_per_task=1
121	typeset -L20 spalte1
122	typeset -R40 spalte2
123	typeset -L60 spalte3
124
125
126
127	# FEHLERBEHANDLUNG
128	# BEI EXIT:
129	trap 'if [[ $locat != normal ]]
130	then
131	case $locat in
132	(option) printf "\n --> available optios can be displayed"
133	printf " by typing:"
134	printf "\n \"subjob ?\" \n";;
135	(ftpcopy\|parameter\|scp\|verify) printf "\n";;
136	(*) printf "\n +++ unknown error"
137	printf "\n please inform S. Raasch!\n"
138	esac
139	[[ -f $job_to_send ]] && rm $job_to_send
140	printf "\n\n+++ SUBJOB killed \n\n"
141	fi' exit
142
143
144	# BEI TERMINAL-BREAK:
145	trap '[[ -f $job_to_send ]] && rm $job_to_send
146	printf "\n\n+++ SUBJOB killed \n\n"
147	exit
148	' 2
149
150
151
152
153	# LOKALEN HOSTNAMEN FESTSTELLEN
154	local_host=$(hostname)
155
156
157
158	# HOSTSPEZIFISCHE VARIABLEN VEREINBAREN BZW. PRUEFEN, OB LOKALER HOST
159	# UEBERHAUPT ZULAESSIG IST
160	case $local_host in
161	(atmos) local_addres=172.20.25.35; local_host=lcide;;
162	(autan) local_addres=130.75.105.57; local_host=lcmuk;;
163	(bora) local_addres=130.75.105.103; local_host=lcmuk;;
164	(bicegate1) local_addres=130.73.232.102; local_host=lcsgib;;
165	(bicegate2) local_addres=130.73.232.103; local_host=lcsgib;;
166	(breg-en0\|berni-en0) local_addres=130.73.230.10; local_host=ibmb;;
167	(breva) local_addres=130.75.105.98; local_host=lcmuk;;
168	(b01*) local_addres=130.73.232.102; local_host=lcsgib;;
169	(compute-*.local) local_addres=172.20.4.2; local_host=lcfimm;;
170	(cs*) local_addres=136.172.44.131; local_host=nech;;
171	(elephanta) local_addres=130.75.105.6; local_host=lcmuk;;
172	(fimm.bccs.uib.no) local_addres=172.20.4.2; local_host=lcfimm;;
173	(gallego) local_addres=130.75.105.10; local_host=lcmuk;;
174	(gfdl5) local_addres=165.132.26.58; local_host=ibmy;;
175	(gfdl3.yonsei.ac.kr) local_addres=165.132.26.56; local_host=decalpha;;
176	(gregale) local_addres=130.75.105.109; local_host=lcmuk;;
177	(hababai) local_addres=130.75.105.108; local_host=lcmuk;;
178	(hexagon.bccs.uib.no) local_addres=129.177.20.113; local_host=lcxt4;;
179	(hicegate1) local_addres=130.75.4.102; local_host=lcsgih;;
180	(hicegate2) local_addres=130.75.4.103; local_host=lcsgih;;
181	(hreg-en0\|hanni-en0) local_addres=130.75.4.10; local_host=ibmh;;
182	(h01*) local_addres=130.75.4.102; local_host=lcsgih;;
183	(irifi) local_addres=130.75.105.104; local_host=lcmuk;;
184	(levanto) local_addres=130.75.105.45; local_host=lcmuk;;
185	(maestro) local_addres=130.75.105.2; local_host=lcmuk;;
186	(nid*) local_addres=129.177.20.113; local_host=lcxt4;;
187	(nobel*) local_addres=150.183.5.101; local_host=ibms;;
188	(orkan) local_addres=130.75.105.3; local_host=lcmuk;;
189	(ostria) local_addres=130.75.105.106; local_host=lcmuk;;
190	(paesano) local_addres=130.75.105.46; local_host=lcmuk;;
191	(quanero) local_addres=130.75.105.107; local_host=lcmuk;;
192	(scirocco) local_addres=172.20.25.41; local_host=lcmuk;;
193	(sun1\|sun2) local_addres=130.75.6.1; local_host=unics;;
194	(sx-*) local_addres=172.16.1.131; local_host=necriam;;
195	(r1*) local_addres=130.75.4.102; local_host=lcsgih;;
196	(r2*) local_addres=130.73.232.102; local_host=lcsgib;;
197	(tgg*) local_addres=172.17.75.161; local_host=lctit;;
198	(vorias) local_addres=172.20.25.43; local_host=lcmuk;;
199	(*) printf "\n +++ \"$local_host\" unknown";
200	printf "\n please inform S. Raasch!";
201	locat=parameter; exit;;
202	esac
203
204
205
206	# REMOTE HOST DEFAULTMAESSIG = LOCAL HOST SETZEN
207	remote_host=$local_host
208
209
210
211
212	# PROZEDUROPTIONEN EINLESEN
213	while getopts :c:dDg:h:m:n:N:O:q:t:T:u:vX: option
214	do
215	case $option in
216	(c) job_catalog=$OPTARG;;
217	(d) delete_dayfile=true;;
218	(D) no_submit=true;;
219	(g) group_number=$OPTARG;;
220	(h) remote_host=$OPTARG;;
221	(m) memory=$OPTARG;;
222	(n) job_name=$OPTARG;;
223	(N) node_usage=$OPTARG;;
224	(O) threads_per_task=$OPTARG;;
225	(q) no_default_queue=$OPTARG;;
226	(t) cputime=$OPTARG;;
227	(T) tasks_per_node=$OPTARG;;
228	(u) remote_user=$OPTARG;;
229	(v) verify=false;;
230	(X) numprocs=$OPTARG;;
231	(\?) printf "\n +++ Option $OPTARG unknown \n";
232	locat=option; exit;;
233	esac
234	done
235
236
237	# JOBDATEINAMEN ALS NAECHSTES ARGUMENT HOLEN
238	shift OPTIND-1; file_to_send=$1
239
240
241	# KURZE AUFRUFBESCHREIBUNG WIRD HIER AUSGEGEBEN
242	if [ "$1" = "?" ]
243	then
244	(printf "\n *** subjob can be called as follows:\n"
245	printf "\n subjob -c.. -d -D -h.. -m.. -q.. -t.. -u.. -v <jobfile>\n"
246	printf "\n Description of available options:\n"
247	printf "\n Option Description Default-Value"
248	printf "\n -c job-input- and output-catalog ~/job_queue"
249	printf "\n -d no job-protocol will be created ---"
250	printf "\n -D only the job-file will be created ---"
251	printf "\n -h execution host, available hosts: $remote_host"
252	printf "\n ibm, ibmb, ibmh, ibms, ibmy, lcmuk,"
253	printf "\n lctit, nech, necriam, unics"
254	printf "\n -m memory demand per process in MByte ---"
255	printf "\n -n jobname <jobdatei>"
256	printf "\n -O threads per task (for OpenMP usage) 1"
257	printf "\n -q job-queue to be used default"
258	printf "\n -t allowed cpu-time in seconds ---"
259	printf "\n -T tasks per node (on parallel hosts) ---"
260	printf "\n -u username on execution host from .netrc"
261	printf "\n -v no prompt for confirmation ---"
262	printf "\n -X # of processors (on parallel hosts) 1"
263	printf "\n "
264	printf "\n The only possible positional parameter is <jobfile>:"
265	printf "\n The complete NQS-job must be provided here."
266	printf "\n <jobfile>=? creates this outline\n\n") \| more
267	exit
268	fi
269
270
271
272	# PRUEFEN, OB JOBDATEI ANGEGEBEN WURDE UND OB SIE AUCH EXISTIERT
273	if [[ "$file_to_send" = "" ]]
274	then
275	printf "\n +++ job-file missing"
276	locat=parameter; exit
277	else
278	if [[ -f $file_to_send ]]
279	then
280	true
281	else
282	printf "\n +++ job-file: "
283	printf "\n $file_to_send"
284	printf "\n does not exist"
285	locat=parameter; exit
286	fi
287	fi
288
289
290
291	# FALLS KEIN JOBNAME ANGEGEBEN WURDE, WIRD JOBNAME = JOBDATEINAME
292	# GESETZT. VORAUSSETZUNG: JOBDATEINAME BEINHALTET KEINE PFADE
293	if [[ $job_name = none ]]
294	then
295	job_name=$file_to_send
296	fi
297	if [[ $(echo $job_name \| grep -c "/") != 0 ]]
298	then
299	printf "\n +++ job-file name: "
300	printf "\n $job_name"
301	printf "\n must not contain \"/\"-characters"
302	locat=parameter; exit
303	fi
304
305
306
307
308	# HOSTSPEZIFISCHE GROESSEN VEREINBAREN BZW. ABBRUCH BEI UNZULAESSIGEM HOST
309	# ODER WENN HOST NICHT ANGEGEBEN WURDE
310	if [[ $remote_host = none ]]
311	then
312	printf "\n +++ host missing"
313	locat=option; exit
314	else
315	case $remote_host in
316	(ibm) queue=p690_standard; remote_addres=134.76.99.81; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
317	(ibmb) queue=cpar; remote_addres=130.73.230.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
318	(ibmh) queue=cpar; remote_addres=130.75.4.10; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
319	(ibms) queue=p_normal; remote_addres=150.183.5.101; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
320	(ibmy) queue=parallel; remote_addres=165.132.26.58; submcom=/usr/lpp/LoadL/full/bin/llsubmit;;
321	(lcfimm) remote_addres=172.20.4.2; submcom=/opt/torque/bin/qsub;;
322	(lcsgib) queue=smallq; remote_addres=130.73.232.103; submcom=/opt/moab/bin/msub;;
323	(lcsgih) queue=smallq; remote_addres=130.75.4.103; submcom=/opt/moab/bin/msub;;
324	(lctit) queue=lctit; remote_addres=172.17.75.161; submcom=/n1ge/TITECH_GRID/tools/bin/n1ge;;
325	(lcxt4) remote_addres=129.177.20.113; submcom=/opt/torque/2.3.0/bin/qsub;;
326	(nech) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=136.172.44.147; submcom="/usr/local/bin/qsub";;
327	(necriam) qsubmem=memsz_job; qsubtime=cputim_job; remote_addres=172.16.1.131; submcom="/usr/bin/nqsII/qsub";;
328	(vpp) qsubmem=m; qsubtime=t; queue=vpp; remote_addres=130.75.4.130;;
329	(unics) qsubmem=d; qsubtime=t; queue=unics; remote_addres=130.75.6.1;;
330	(*) printf "\n +++ hostname \"$remote_host\" not allowed";
331	locat=parameter; exit;;
332	esac
333	fi
334
335
336	# EVTL. PRUEFEN, OB ANGEGEBENE QUEUE ZULAESSIG IST
337	if [[ $no_default_queue != none ]]
338	then
339	error=false
340	ndq=$no_default_queue
341	case $remote_host in
342	(ibm) case $ndq in
343	(p690_express\|p690_standard\|p690_long) error=false;;
344	(*) error=true;;
345	esac;;
346	(ibmb) case $ndq in
347	(cdata\|cdev\|cexp\|c1\|cshare\|csolo\|cspec) error=false;;
348	(*) error=true;;
349	esac;;
350	(ibmh) case $ndq in
351	(cdata\|cdev\|cexp\|channi\|cxxl\|c1\|cshare\|csolo\|csoloh3h\|csoloh6h\|csoloh12h\|csoloh1d\|csoloh2d\|cspec) error=false;;
352	(*) error=true;;
353	esac;;
354	(ibms) case $ndq in
355	(express\|normal\|p_express\|p_normal\|p_normal_1.3\|p_normal_1.7\|grand) error=false;;
356	(*) error=true;;
357	esac;;
358	(ibmy) case $ndq in
359	(parallel) error=false;;
360	(*) error=true;;
361	esac;;
362	(lcsgib\|lcsgih) case $ndq in
363	(testq\|smallq\|bigq) error=false;;
364	(*) error=true;;
365	esac;;
366	(lctit) case $ndq in
367	(novice\|sla1\|sla2\|sla3\|RAM64GB\|RAM128GB) error=false;;
368	(*) error=true;;
369	esac;;
370	(t3eb) case $ndq in
371	(berte\|p50\|p100\|p392\|forfree\|p25himem) error=false;;
372	(*) error=true;;
373	esac;;
374	(necriam) case $ndq in
375	(SP\|SS\|P6) error=false;;
376	(*) error=true;;
377	esac;;
378	(t3eh) case $ndq in
379	(para_t3e\|em\|k\|l\|lm\|comp_t3e\|c\|p\|ht) error=false;;
380	(*) error=true;;
381	esac;;
382	(t3ej2\|t3ej5) case $ndq in
383	(low\|normal\|high) error=false;;
384	(*) error=true;;
385	esac;;
386	(t3es) case $ndq in
387	(batch\|serial-4\|pe4\|p48\|pe16\|pe32\|pe64\|pe128) error=false;;
388	(*) error=true;;
389	esac;;
390	(unics) case $ndq in
391	(unics\|ht) error=false;;
392	(*) error=true;;
393	esac;;
394	esac
395	if [[ $error = true ]]
396	then
397	printf "\n +++ queue \"$no_default_queue\" on host \"$remote_host\" not allowed"
398	locat=parameter; exit
399	else
400	queue=$no_default_queue
401	fi
402	fi
403
404
405
406	# KNOTENNUTZUNG IN ENTWICKLERQUEUE MUSS SHARED SEIN
407	if [[ $node_usage != shared && $queue = cdev ]]
408	then
409	node_usage=shared
410	fi
411
412
413
414	# PRUEFEN DER CPU-ZEIT, ZEIT NACH STUNDEN, MINUTEN UND SEKUNDEN
415	# AUFTEILEN
416	done=false
417	while [[ $done = false ]]
418	do
419	if (( $cputime <= 0 ))
420	then
421	printf "\n +++ wrong cpu-time or cpu-time missing"
422	printf "\n >>> Please type cpu-time in seconds as INTEGER:"
423	printf "\n >>> "
424	read cputime 1>/dev/null 2>&1
425	else
426	done=true
427	fi
428	done
429	if [[ $remote_host = nech ]]
430	then
431	if (( tasks_per_node != 0 ))
432	then
433	(( cputime = cputime * tasks_per_node ))
434	elif [[ $numprocs != 0 ]]
435	then
436	(( cputime = cputime * numprocs ))
437	fi
438	fi
439	(( stunden = cputime / 3600 ))
440	(( resttime = cputime - stunden * 3600 ))
441	(( minuten = resttime / 60 ))
442	(( sekunden = resttime - minuten * 60 ))
443	timestring=${stunden}:${minuten}:${sekunden}
444
445
446
447	# PRUEFEN DER KERNSPEICHERANFORDERUNG
448	done=false
449	while [[ $done = false ]]
450	do
451	if (( memory <= 0 ))
452	then
453	printf "\n +++ wrong memory demand or memory demand missing"
454	printf "\n >>> Please type memory in MByte per process as INTEGER:"
455	printf "\n >>> "
456	read memory 1>/dev/null 2>&1
457	else
458	done=true
459	fi
460	done
461
462	if [[ $remote_host = nech \|\| $remote_host = necriam ]]
463	then
464	if (( tasks_per_node != 0 ))
465	then
466	(( Memory = memory * tasks_per_node / 1000 ))
467	elif [[ $numprocs != 0 ]]
468	then
469	(( Memory = memory * numprocs / 1000 ))
470	else
471	(( Memory = memory / 1000 ))
472	fi
473	fi
474
475
476	# SPEICHERBERECHNUNG BEI OPENMP-NUTZUNG
477	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
478	then
479	(( memory = memory * threads_per_task ))
480	fi
481
482
483	# BERECHNUNG DER ANZAHL DER ZU VERWENDENDEN KNOTEN
484	if (( tasks_per_node != 0 ))
485	then
486	(( nodes = numprocs / ( tasks_per_node * threads_per_task ) ))
487	fi
488
489
490
491	# HEADER-AUSGABE
492	if [[ $verify = true ]]
493	then
494	printf "\n\n"
495	printf "#--------------------------------------------------------------# \n"
496	spalte1=SUBJOB;spalte2=$(date)
497	printf "\| $spalte1$spalte2 \| \n"
498	printf "\| \| \n"
499	printf "\| values of parameters/options: \| \n"
500	spalte1=local_host$punkte; spalte2=$punkte$local_host
501	printf "\| $spalte1$spalte2 \| \n"
502	spalte1=remote_host$punkte; spalte2=$punkte$remote_host
503	printf "\| $spalte1$spalte2 \| \n"
504	spalte1=queue$punkte; spalte2=$punkte$queue
505	printf "\| $spalte1$spalte2 \| \n"
506	spalte1=memory$punkte; spalte2="$punkte$memory mb"
507	printf "\| $spalte1$spalte2 \| \n"
508	spalte1=cputime$punkte; spalte2="$punkte$cputime sec"
509	printf "\| $spalte1$spalte2 \| \n"
510	spalte1=job_name$punkte; spalte2="$punkte$job_name"
511	printf "\| $spalte1$spalte2 \| \n"
512	printf "#--------------------------------------------------------------# \n\n"
513
514
515	# KONTROLLABFRAGE, OB ALLES O.K.
516	antwort="dummy"
517	while [[ $antwort != y && $antwort != Y && $antwort != n && $antwort != N ]]
518	do
519	read antwort?" >>> continue (y/n) ? "
520	done
521	if [[ $antwort = n \|\| $antwort = N ]]
522	then
523	locat=verify; exit
524	fi
525	printf "\n"
526	fi
527
528
529
530	# ZUFALLSKENNUNG GENERIEREN UND JOBNAMEN AUF ZIELRECHNER BESTIMMEN
531	kennung=$RANDOM
532	job_on_remhost=${job_name}_${kennung}_$local_host
533	job_to_send=job_to_send_$kennung
534	if [[ $delete_dayfile = false ]]
535	then
536	remote_dayfile=${local_host}_${job_name}_result_$kennung
537	local_dayfile=${remote_host}_${job_name}
538	else
539	remote_dayfile=/dev/null
540	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
541	then
542	notification='# @ notification = never'
543	fi
544	fi
545
546
547
548	# QSUB- ODER LL-KOMMANDOS BZW. SKRIPTE GENERIEREN
549	if [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs != 0 ]]
550	then
551
552	if [[ $remote_host = ibmy ]]
553	then
554	consumable_memory=""
555	else
556	consumable_memory="ConsumableMemory($memory mb)"
557	fi
558	if [[ $queue = cdev ]]
559	then
560	data_limit="# @ data_limit = 1.76gb"
561	network_to_use="# @ network.mpi = sn_all,shared,ip"
562	else
563	if [[ $remote_host = ibms ]]
564	then
565	network_to_use="# @ network.mpi = csss,shared,us"
566	elif [[ $remote_host = ibmy ]]
567	then
568	network_to_use=""
569	else
570	network_to_use="# @ network.mpi = sn_all,shared,us"
571	data_limit="# @ data_limit = 1.76gb"
572	fi
573	fi
574
575	cat > $job_to_send << %%END%%
576	#!/bin/ksh
577
578	# @ job_type = parallel
579	# @ job_name = palm
580	# @ wall_clock_limit = ${timestring},$timestring
581	# @ resources = ConsumableCpus($threads_per_task) $consumable_memory
582	# @ output = $remote_dayfile
583	# @ error = $remote_dayfile
584	# @ image_size = 50
585	# @ class = $queue
586	# @ environment = OMP_NUM_THREADS=$threads_per_task; MP_SHARED_MEMORY=yes
587	$network_to_use
588	$data_limit
589	$notification
590
591	%%END%%
592
593	if (( nodes > 0 ))
594	then
595
596	cat >> $job_to_send << %%END%%
597	# @ node = $nodes
598	# @ tasks_per_node = $tasks_per_node
599	# @ node_usage = $node_usage
600	# @ queue
601
602	%%END%%
603
604	else
605
606	if [[ $remote_host != ibmy ]]
607	then
608
609	cat >> $job_to_send << %%END%%
610	# @ blocking = unlimited
611	# @ total_tasks = $numprocs
612	# @ node_usage = $node_usage
613	# @ queue
614
615	%%END%%
616
617	else
618
619	cat >> $job_to_send << %%END%%
620	# @ node = 1
621	# @ total_tasks = $numprocs
622	# @ queue
623
624	%%END%%
625
626	fi
627
628	fi
629
630	elif [[ $(echo $remote_host \| cut -c1-3) = ibm && $numprocs = 0 ]]
631	then
632
633	cat > $job_to_send << %%END%%
634	#!/bin/ksh
635
636	# @ job_type = serial
637	# @ node_usage = $node_usage
638	# @ job_name = palm
639	# @ wall_clock_limit = ${timestring},$timestring
640	# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)
641	# @ output = $remote_dayfile
642	# @ error = $remote_dayfile
643	# @ class = $queue
644	$notification
645
646	# @ queue
647
648	%%END%%
649
650	elif [[ $remote_host = lcfimm ]]
651	then
652
653	if [[ $numprocs != 0 ]]
654	then
655	cat > $job_to_send << %%END%%
656	#!/bin/ksh
657	#PBS -N $job_name
658	#PBS -A geofysisk
659	#PBS -l walltime=$timestring
660	#PBS -l nodes=${nodes}:ppn=$tasks_per_node
661	#PBS -l pmem=${memory}mb
662	#PBS -m abe
663	#PBS -M bjorn.maronga@student.uib.no
664	#PBS -o $remote_dayfile
665	#PBS -j oe
666	mpd &
667
668	%%END%%
669
670	else
671	cat > $job_to_send << %%END%%
672	#!/bin/ksh
673	#PBS -N $job_name
674	#PBS -A geofysisk
675	#PBS -l walltime=$timestring
676	#PBS -l ncpus=1
677	#PBS -l pmem=${memory}mb
678	#PBS -m abe
679	#PBS -M bjorn.maronga@student.uib.no
680	#PBS -o $remote_dayfile
681	#PBS -j oe
682
683	%%END%%
684
685	fi
686
687	elif [[ $remote_host = lcsgih \|\| $remote_host = lcsgib ]]
688	then
689
690	if [[ $queue = testq ]]
691	then
692	queue_directive="#PBS -q $queue"
693	else
694	queue_directive=""
695	fi
696
697	if [[ $numprocs != 0 ]]
698	then
699	cat > $job_to_send << %%END%%
700	#!/bin/bash
701	#PBS -N $job_name
702	#PBS -l walltime=$timestring
703	#PBS -l nodes=$nodes:ppn=${tasks_per_node}
704	#PBS -l feature=$sgi_feature
705	#PBS -l naccesspolicy=$node_usage
706	#PBS -o $remote_dayfile
707	#PBS -j oe
708	$queue_directive
709
710	. /usr/share/modules/init/bash
711	module load $mpilib
712	# module load mvapich2/1.2rc1-intel
713	# module load mvapich2
714	module load netcdf
715	export LD_LIBRARY_PATH=/sw/intel/cce/10.1.015/lib:/sw/intel/fce/10.1.015/lib:/sw/dataformats/netcdf/3.6.2/lib:\$LD_LIBRARY_PATH
716	echo ld_library_path=\$LD_LIBRARY_PATH
717
718	%%END%%
719
720	else
721	cat > $job_to_send << %%END%%
722	#PBS -S /bin/bash
723	#PBS -N $job_name
724	#PBS -l walltime=$timestring
725	#PBS -l ncpus=1
726	#PBS -o $remote_dayfile
727	#PBS -e $remote_dayfile
728
729	%%END%%
730
731	fi
732
733	elif [[ $remote_host = lcxt4 ]]
734	then
735
736	if [[ $numprocs != 0 ]]
737	then
738	cat > $job_to_send << %%END%%
739	#!/bin/ksh
740	#PBS -S /bin/ksh
741	#PBS -N $job_name
742	#PBS -A geofysisk
743	#PBS -j oe
744	#PBS -l walltime=$timestring
745	#PBS -l mppwidth=${numprocs}
746	#PBS -l mppnppn=${tasks_per_node}
747	#PBS -m abe
748	#PBS -M bjorn.maronga@student.uib.no
749	#PBS -o $remote_dayfile
750
751	%%END%%
752
753	else
754	cat > $job_to_send << %%END%%
755	#!/bin/ksh
756	#PBS -S /bin/ksh
757	#PBS -N $job_name
758	#PBS -A geofysisk
759	#PBS -j oe
760	#PBS -l walltime=$timestring
761	#PBS -l ncpus=1
762	#PBS -l pmem=${memory}mb
763	#PBS -m abe
764	#PBS -M bjorn.maronga@student.uib.no
765	#PBS -o $remote_dayfile
766
767	%%END%%
768
769	fi
770
771	elif [[ $remote_host = nech ]]
772	then
773
774	if (( nodes > 1 ))
775	then
776	cat > $job_to_send << %%END%%
777	#!/bin/ksh
778	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
779	#PBS -l ${qsubmem}=${Memory}gb
780	#PBS -b $nodes
781	#PBS -o $remote_dayfile
782	#PBS -N palm
783	#PBS -j o
784	#PBS -T mpisx
785
786	%%END%%
787
788	elif [[ $numprocs != 0 ]]
789	then
790	cat > $job_to_send << %%END%%
791	#!/bin/ksh
792	#PBS -l cpunum_prc=$tasks_per_node,cputim_job=$cputime
793	#PBS -l ${qsubmem}=${Memory}gb
794	#PBS -o $remote_dayfile
795	#PBS -N palm
796	#PBS -j o
797
798	%%END%%
799
800	else
801	cat > $job_to_send << %%END%%
802	#!/bin/ksh
803	#PBS -l ${qsubmem}=${Memory}gb,${qsubtime}=$cputime
804	#PBS -o $remote_dayfile
805	#PBS -j o
806
807	%%END%%
808
809	fi
810
811	elif [[ $remote_host = necriam ]]
812	then
813
814	if (( nodes > 1 ))
815	then
816	cat > $job_to_send << %%END%%
817	#!/bin/ksh
818	#PBS -b $nodes
819	#PBS -o $remote_dayfile
820	#PBS -N $job_name
821	#PBS -j o
822	#PBS -v MPIPROGINV=YES
823
824	%%END%%
825
826	elif [[ $numprocs != 0 ]]
827	then
828	cat > $job_to_send << %%END%%
829	#!/bin/ksh
830	#PBS -q ${queue}
831	#PBS -o $remote_dayfile
832	#PBS -N $job_name
833	#PBS -j o
834	#PBS -v MPIPROGINV=YES
835
836	%%END%%
837
838	else
839	cat > $job_to_send << %%END%%
840	#!/bin/ksh
841	#PBS -o $remote_dayfile
842	#PBS -j o
843
844	%%END%%
845
846	fi
847
848	elif [[ $remote_host = lctit ]]
849	then
850	cat > $job_to_send << %%END%%
851	#!/bin/bash
852	#$ -S /bin/bash
853	cd $job_catalog
854	export PATH=$PALM_BIN:\$PATH
855	echo \$PATH
856
857	%%END%%
858
859	# OPTIONEN FUER SUBMIT-KOMMANDO ZUSAMMENSTELLEN
860	# submcom="$submcom -N $job_name -sgeout $remote_dayfile -q default"
861	submcom="$submcom -g $group_number -N $job_name -rt 4320 -sgeout $remote_dayfile -q $node_usage "
862
863	else
864
865	cat > $job_to_send << %%END%%
866	# @\$-q ${queue}
867	# @\$-l${qsubtime} $timestring
868	# @\$-l${qsubmem} ${memory}mb
869	# @\$-o $remote_dayfile
870	# @\$-eo
871
872	%%END%%
873
874	fi
875
876
877	# BEI RECHNUNG AUF REMOTE-MASCHINEN RUECKTRANSFER DES DAYFILES PER TRAP
878	# BEI EXIT VERANLASSEN
879	# VEKTORRECHNER MUSS EIGENEN JOB STARTEN, DA DORT NOHUP NICHT FUNKTIONIERT
880	# AUF IBM IN SEOUL IST RUECKTRANSFER ZUR ZEIT GENERELL NICHT MOEGLICH
881	if [[ $delete_dayfile = false && $remote_host != $local_host ]]
882	then
883	echo "set +vx" >> $job_to_send
884	echo "trap '" >> $job_to_send
885	echo "set +vx" >> $job_to_send
886	if [[ $(echo $remote_host \| cut -c1-3) = ibm \|\| $(echo $remote_host \| cut -c1-5) = lcsgi \|\| $(echo $remote_host \| cut -c1-3) = nec \|\| $remote_host = lctit ]]
887	then
888	if [[ $remote_host = ibmb \|\| $remote_host = ibmh ]]
889	then
890	return_queue=c1
891	elif [[ $remote_host = ibms ]]
892	then
893	return_queue=p_normal
894	elif [[ $remote_host = ibmy ]]
895	then
896	return_queue=serial
897	elif [[ $remote_host = lctit ]]
898	then
899	return_queue=sla3
900	elif [[ $remote_host = necriam ]]
901	then
902	return_queue=SP
903	else
904	return_queue=unknown
905	fi
906
907	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
908	then
909
910	echo "echo \"#!/bin/ksh\" >> scpjob.$kennung" >> $job_to_send
911	echo "echo \"# @ job_type = serial\" >> scpjob.$kennung" >> $job_to_send
912	echo "echo \"# @ job_name = transfer\" >> scpjob.$kennung" >> $job_to_send
913	echo "echo \"# @ resources = ConsumableCpus(1) ConsumableMemory(1 gb)\" >> scpjob.$kennung" >> $job_to_send
914	echo "echo \"# @ wall_clock_limit = 00:10:00,00:10:00\" >> scpjob.$kennung " >> $job_to_send
915	echo "echo \"# @ output = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
916	echo "echo \"# @ error = job_queue/last_job_transfer_protocol\" >> scpjob.$kennung" >> $job_to_send
917	echo "echo \"# @ class = $return_queue\" >> scpjob.$kennung" >> $job_to_send
918	echo "echo \"# @ image_size = 10\" >> scpjob.$kennung" >> $job_to_send
919	echo "echo \"# @ notification = never\" >> scpjob.$kennung" >> $job_to_send
920
921	echo "echo \"# @ queue\" >> scpjob.$kennung" >> $job_to_send
922	echo "echo \" \" >> scpjob.$kennung" >> $job_to_send
923
924	echo "echo \"set -x\" >> scpjob.$kennung" >> $job_to_send
925	echo "echo \"batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \\\"$job_catalog\\\" $local_dayfile\" >> scpjob.$kennung" >> $job_to_send
926	echo "echo \"exit\" >> scpjob.$kennung" >> $job_to_send
927
928	elif [[ $remote_host = nech ]]
929	then
930	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
931	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
932	echo "#PBS -l ${qsubmem}=1GB,${qsubtime}=100" >> $job_to_send
933	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
934	echo "#PBS -j o" >> $job_to_send
935	echo " " >> $job_to_send
936	echo "set -x" >> $job_to_send
937	echo "cd /pf/b/${remote_user}/job_queue" >> $job_to_send
938	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
939	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
940	echo "%%END%%" >> $job_to_send
941
942	elif [[ $remote_host = necriam ]]
943	then
944	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
945	echo "#PBS -q $return_queue" >> $job_to_send
946	echo "#PBS -o last_job_transfer_protocol" >> $job_to_send
947	echo "#PBS -j o" >> $job_to_send
948	echo " " >> $job_to_send
949	echo "set -x" >> $job_to_send
950	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
951	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
952	echo "%%END%%" >> $job_to_send
953
954	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
955	then
956	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
957	echo "#!/bin/bash" >> $job_to_send
958	echo "#PBS -N job_protocol_transfer" >> $job_to_send
959	echo "#PBS -l walltime=00:02:00" >> $job_to_send
960	echo "#PBS -l nodes=1:ppn=1" >> $job_to_send
961	echo "#PBS -l feature=xe" >> $job_to_send
962	echo "#PBS -o \$HOME/job_queue/last_job_transfer_protocol" >> $job_to_send
963	echo "#PBS -j oe" >> $job_to_send
964	echo " " >> $job_to_send
965	echo ". /usr/share/modules/init/bash" >> $job_to_send
966	echo "set -x" >> $job_to_send
967	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
968	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
969	echo "%%END%%" >> $job_to_send
970
971	elif [[ $remote_host = lctit ]]
972	then
973	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
974	echo "set -x" >> $job_to_send
975	echo "PATH=\$PATH:$job_catalog/../pub" >> $job_to_send
976	echo "cd $job_catalog" >> $job_to_send
977	echo "batch_scp -d -w 10 -u $local_user $local_addres $remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
978	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
979	echo "%%END%%" >> $job_to_send
980
981	else
982
983	echo "cat > scpjob.$kennung << %%END%%" >> $job_to_send
984	echo "# @\\\$-q $return_queue" >> $job_to_send
985	echo "# @\\\$-l${qsubtime} 10" >> $job_to_send
986	echo "# @\\\$-l${qsubmem} 10mb" >> $job_to_send
987	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es ]]
988	then
989	echo "# @\$-l mpp_p=0" >> $job_to_send
990	fi
991	echo '# @\$-lF 10mb' >> $job_to_send
992	# echo '# @\$-o /dev/null' >> $job_to_send
993	echo '# @\$-o job_queue/last_job_transfer_protocol' >> $job_to_send
994	echo '# @\\\$-eo' >> $job_to_send
995	echo " " >> $job_to_send
996	if [[ $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
997	then
998	echo "set +vx" >> $job_to_send
999	echo ". .profile" >> $job_to_send
1000	fi
1001	echo "set -x" >> $job_to_send
1002	echo "batch_scp -d -w 10 -u $local_user $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null" >> $job_to_send
1003	echo "[[ \"\$for_subjob_to_do\" != \"\" ]] && eval \$for_subjob_to_do" >> $job_to_send
1004	echo "%%END%%" >> $job_to_send
1005	fi
1006
1007	if [[ $(echo $remote_host \| cut -c1-3) = ibm ]]
1008	then
1009	echo "llsubmit scpjob.$kennung" >> $job_to_send
1010	elif [[ $(echo $remote_host \| cut -c1-5) = lcsgi ]]
1011	then
1012	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1013	echo "msub scpjob.$kennung" >> $job_to_send
1014	elif [[ $remote_host = lctit ]]
1015	then
1016	echo "chmod u+x scpjob.$kennung" >> $job_to_send
1017	echo "rm -rf ${job_catalog}/last_job_transfer_protocol" >> $job_to_send
1018	echo "n1ge -N jobtransfer -q $return_queue -sgeout ${job_catalog}/last_job_transfer_protocol scpjob.$kennung" >> $job_to_send
1019	echo "sleep 10" >> $job_to_send
1020	elif [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 ]]
1021	then
1022	echo "qsub -J n scpjob.$kennung" >> $job_to_send
1023	elif [[ $remote_host = t3es ]]
1024	then
1025	echo "qsub -J n -s /bin/ksh scpjob.$kennung" >> $job_to_send
1026	else
1027	echo "qsub scpjob.$kennung" >> $job_to_send
1028	fi
1029	echo "rm scpjob.$kennung" >> $job_to_send
1030	if [[ $remote_host = nech ]]
1031	then
1032	echo "cd -" >> $job_to_send
1033	fi
1034	else
1035	# echo "ftpcopy -d $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile" >> $job_to_send
1036	echo "nohup ftpcopy -d -w 15 $local_addres ${job_catalog}/$remote_dayfile \"$job_catalog\" $local_dayfile > /dev/null &" >> $job_to_send
1037	fi
1038	echo "set -x" >> $job_to_send
1039	echo " ' exit" >> $job_to_send
1040	echo "set -x" >> $job_to_send
1041	fi
1042
1043
1044
1045	# EIGENTLICHE JOB-DATEI AN QSUB-KOMMANDOS ANHAENGEN
1046	cat $file_to_send >> $job_to_send
1047
1048	if [[ $remote_host = ibm ]]
1049	then
1050	echo " " >> $job_to_send
1051	echo "exit" >> $job_to_send
1052	fi
1053	if [[ $remote_host = lctit ]]
1054	then
1055	echo " " >> $job_to_send
1056	echo "rm ~/job_queue/$job_on_remhost" >> $job_to_send
1057	fi
1058
1059
1060
1061	# USER-NAME AUF ZIELRECHNER AUS .NETRC-DATEI ERMITTELN
1062	if [[ -z $remote_user ]]
1063	then
1064	if [[ $remote_host = t3eb \|\| $remote_host = t3eh \|\| $remote_host = t3ej2 \|\| $remote_host = t3ej5 \|\| $remote_host = t3es \|\| $remote_host = vpp ]]
1065	then
1066	grep $remote_addres ~/.netrc \| read dum dum dum remote_user dum dum
1067	fi
1068	fi
1069
1070
1071
1072	# JOB AUF ZIELRECHNER TRANSFERIEREN BZW. INS JOBVERZEICHNIS KOPIEREN
1073	if [[ $no_submit = false ]]
1074	then
1075	if [[ $remote_host != $local_host ]]
1076	then
1077	[[ $verify = true ]] && printf "\n >>> transfering job to \"$remote_host\"..."
1078	if [[ $remote_host = ibms \|\| $remote_host = ibmy ]] # ssh on ibms cannot handle "~/"
1079	then
1080	job_catalog_save=$job_catalog
1081	job_catalog=job_queue
1082	elif [[ $remote_host = nech ]]
1083	then
1084	job_catalog_save=$job_catalog
1085	job_catalog=/hpf/b/${remote_user}/job_queue
1086	fi
1087	if [[ $local_host = decalpha ]]
1088	then
1089	# VERWENDUNG VON SCP AUF DECALPHA FRAGT FEHLERHAFTERWEISE
1090	# PASSWORT AB
1091	/bin/scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1092	elif [[ $remote_host = nech ]]
1093	then
1094	# DATEIEN KOENNEN NUR UEBER DEN ARCHIVE-SERVER DES DKRZ
1095	# TRANSFERIERT WERDEN
1096	scp $job_to_send ${remote_user}@136.172.44.205:${job_catalog}/$job_on_remhost
1097	else
1098	scp $job_to_send ${remote_user}@${remote_addres}:${job_catalog}/$job_on_remhost
1099	fi
1100	if [[ $? = 1 ]]
1101	then
1102	locat=scp; exit
1103	fi
1104	if [[ $remote_host = ibms ]]
1105	then
1106	job_catalog=$job_catalog_save
1107	fi
1108	[[ $verify = true ]] && printf "\n >>> finished\n"
1109	else
1110	eval job_catalog=$job_catalog
1111	cp $job_to_send ${job_catalog}/$job_on_remhost
1112	fi
1113
1114
1115
1116	# NQS- BZW. LOADLEVELER-JOB STARTEN
1117	if [[ $remote_host != $local_host ]]
1118	then
1119	[[ $verify = true ]] && printf "\n >>> submitting job using \"qsub\"...\n"
1120	if [[ $remote_host != lctit ]]
1121	then
1122	ssh $remote_addres -l $remote_user "cd $job_catalog; $submcom $job_on_remhost; rm $job_on_remhost"
1123	else
1124	# TIT ERLAUBT NUR DIE AUSFï¿œHRUNG GANZ BESTIMMTER KOMMANDOS
1125	# MIT SSH, DESHALB AUFRUF PER PIPE
1126	# UEBERGANGSWEISE CHECK, OB N1GE ENVIRONMENT WIRKLICH VERFUEGBAR
1127	print "cd $job_catalog; chmod u+x $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1128	echo "first try" > send_protocol
1129	while [[ $(cat send_protocol \| grep -c "Forwarding to N1GE") = 0 ]]
1130	do
1131	if [[ $(cat send_protocol \| grep -c "first try") = 1 ]]
1132	then
1133	printf "\n trying to submit job to TIT cluster..."
1134	else
1135	printf "\n +++ failed ... trying to submit again ..."
1136	fi
1137	print "cd $job_catalog; $submcom $job_on_remhost" \| ssh $remote_addres -l $remote_user > send_protocol 2>&1
1138	cat send_protocol
1139	done
1140	sleep 10
1141	print "cd $job_catalog; rm $job_on_remhost" \| ssh $remote_addres -l $remote_user > /dev/null 2>&1
1142	echo "$submcom $job_on_remhost"
1143	rm send_protocol
1144	fi
1145
1146	[[ $verify = true ]] && printf " >>> o.k.\n"
1147	else
1148	cd $job_catalog
1149	if [[ $(echo $local_host \| cut -c1-5) = lcsgi \|\| $(echo $local_host \| cut -c1-3) = ibm ]]
1150	then
1151	eval $submcom $job_on_remhost
1152	elif [[ $local_host = lcfimm \|\| $local_host = lctit \|\| $localhost = lcxt4 ]]
1153	then
1154	eval $submcom $job_on_remhost
1155	echo "$submcom $job_on_remhost"
1156	chmod u+x $job_on_remhost
1157	elif [[ $local_host = nech ]]
1158	then
1159	if [[ $queue = default ]]
1160	then
1161	eval $submcom $job_on_remhost
1162	else
1163	eval $submcom -q $queue $job_on_remhost
1164	fi
1165	else
1166	qsub $job_on_remhost
1167	fi
1168	# JOBFILE DARF AUF LCTIT NICHT GELOESCHT WERDEN!! GESCHIEHT ERST AM JOBENDE
1169	[[ $local_host != lctit ]] && rm $job_on_remhost
1170	cd - > /dev/null
1171	fi
1172	fi
1173
1174
1175
1176	# ABSCHLUSSARBEITEN
1177
1178	if [[ $no_submit = false ]]
1179	then
1180	rm $job_to_send
1181	fi
1182	[[ $verify = true ]] && printf "\n\n *** SUBJOB finished \n\n"

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |