source: palm/trunk/DOC/tec/message_identifiers @ 256

Last change on this file since 256 was 256, checked in by letzel, 16 years ago
  • topography_grid_convention moved from userpar to inipar
  • documentation and examples updated
File size: 23.3 KB
RevLine 
[230]1 List of message identifiers used in PALM message handling routine "message"
2
3    PA****  Identifier for messages in the PALM standard code
4    UI****  Identifier for messages in "user_" routines
5
6message_identifier   message string
7    PA0001            "host" is not set. Please check that environment
8                        variable "localhost" is set before running PALM
9    PA0002            illegal coupling mode: ...
10    PA0003            dt_coupling is  not set but required for coupling
11                       mode "..."
12    PA0004            coupling mode "...": dt_coupling = ... is not equal
13                       to dt_coupling_remote = ...       
14    PA0005            coupling mode "...": dt_coupling <= 0.0 is not allowed
15                       and is reset to MAX(dt_max(A,O)) = ...
16    PA0006            coupling mode "...": restart_time = ... is not equal
17                       to restart_time_remote = ...
18    PA0007            coupling mode "...": dt_restart = ... is not equal
19                       to dt_restart_remote = ...
20    PA0008            coupling mode "...": end_time = ... is not equal to
21                       end_time_remote = ...
22    PA0009            coupling mode "...":  dx = ... is not equal to
23                       dx_remote = ...
24    PA0010            coupling mode "...":  dy = ... is not equal to
25                       dy_remote = ...
26    PA0011            coupling mode "...": nx = ... is not equal to
27                       nx_remote = ...
28    PA0012            coupling mode "...": ny = ... is not equal to
29                       ny_remote = ...
30    PA0013            illegal value given for loop_optimization: "..."
31    PA0014            a non-flat topography does not allow ...
32    PA0015            ocean = .T. does not allow ...
33    PA0016            unknown solver for perturbation pressure:
34                       psolver = "..."
35    PA0017            psolver = "..." only works for a
36                       1d domain-decomposition along x
37                      please do not set npey/=1 in the parameter file'
38    PA0018            psolver = ".." does not work for subdomains with
39                       unequal size please set grid_matching = ''strict''
40                       in the parameter file
41    PA0019            psolver = "..." only works for a parallel environment
42    PA0020            unknown multigrid cycle: cycle_mg = "..."
43    PA0021            unknown fft-algorithm: fft_method = "..."
44    PA0022            unknown advection scheme: momentum_advec = "..."
45    PA0023            momentum_advec = "..." is not allowed with
46                       timestep_scheme = "..."
47    PA0024            unknown advection scheme: scalar_advec = "..."
48    PA0025            use_upstream_for_tke set .TRUE. because
49                       use_sgs_for_particles = .TRUE.
50    PA0026            use_upstream_for_tke = .TRUE. not allowed with
51                       timestep_scheme = "..."
52    PA0027            unknown timestep scheme: timestep_scheme = "..."
53    PA0028            scalar advection scheme "..." does not work with
54                       timestep_scheme ".."
55    PA0029            momentum advection scheme "..." does not work with
56                       timestep_scheme "..."
57    PA0030            initializing_action = "..." unkown or not allowed
58    PA0031            initializing_actions = "set_constant_profiles" and
59                       "set_1d-model_profiles" are not allowed simultaneously
60    PA0032            initializing_actions = "set_constant_profiles" and
61                       "by_user" are not allowed simultaneously
62    PA0033            initializing_actions = "by_user" and 
63                       "set_1d-model_profiles" are not allowed simultaneously
64    PA0034            cloud_physics = ... is not allowed with humidity = ...
65    PA0035            precipitation = ... is not allowed with
66                       cloud_physics = ...
67    PA0036            humidity = .TRUE. and sloping_surface = .TRUE. are not
68                       allowed simultaneously
69    PA0037            UPS-scheme is not implemented for humidity = .TRUE.
70    PA0038            humidity = .TRUE. and passive_scalar = .TRUE. is not
71                       allowed simultaneously'
72    PA0039            UPS-scheme is not implemented for passive_scalar = .TRUE.
73    PA0040            illegal value "..." found for parameter grid_matching
74    PA0041            plant_canopy = .TRUE. requires a non-zero
75                       drag coefficient given value is drag_coefficient = 0.0
76    PA0042            use_top_fluxes must be .TRUE. in ocean version
77    PA0043            ABS( alpha_surface = ... ) must be < 90.0
78    PA0044            dt = ', dt , ' <= 0.0
79    PA0045            cfl_factor = ...  out of range
80                       0.0 < cfl_factor <= 1.0 is required
81    PA0046            baroclinicity (ug) not allowed simultaneously with
82                       galilei transformation
83    PA0047            baroclinicity (vg) not allowed simultaneously with
84                       galilei transformation
85    PA0048            variable translation speed used for
86                       galilei-transformation, which may cause instabilities
87                       in stably stratified regions
88    PA0049            unknown boundary condition: bc_lr = "..."
89    PA0050            unknown boundary condition: bc_ns = "..."
90    PA0051            non-cyclic lateral boundaries do not
91                       allow psolver = "..."
92    PA0052            non-cyclic lateral boundaries do not allow
93                       momentum_advec = "..."
94    PA0053            non-cyclic lateral boundaries do not allow
95                       scalar_advec = "..."
96    PA0054            non-cyclic lateral boundaries do not allow
97                       galilei_transformation = .T.
98    PA0055            adjust_mixing_length = TRUE and bc_e_b = "neumann"
99    PA0056            adjust_mixing_length = FALSE and bc_e_b = "..."
100    PA0057            boundary condition bc_e_b changed to "..."
101    PA0058            unknown boundary condition: bc_e_b = "..."
102    PA0059            unknown boundary condition: bc_p_b = "..."
103    PA0060            boundary condition: bc_p_b = "..." not allowed with
104                       prandtl_layer = .FALSE.'
105    PA0061            unknown boundary condition: bc_p_t = "..."
106    PA0062            unknown boundary condition: bc_pt_b = "..."
107    PA0063            unknown boundary condition: bc_pt_t = "..."
108    PA0064            both, top_momentumflux_u AND top_momentumflux_v
109                       must be set
110    PA0065            boundary_condition: bc_pt_b = "..." is not allowed
111                       with constant_heatflux = .TRUE.
112    PA0066            constant_heatflux = .TRUE. is not allowed with
113                       pt_surface_initial_change (/=0) = ...
114    PA0067            boundary_condition: bc_pt_t = "..." is not allowed
115                       with constant_top_heatflux = .TRUE.
116    PA0068            unknown boundary condition: bc_sa_t = "..."
117    PA0069            boundary condition: bc_sa_t = "..." requires to set
118                       top_salinityflux
119    PA0070            boundary condition: bc_sa_t = "..." is not allowed
120                       with constant_top_salinityflux = .TRUE.'
121    PA0071            unknown boundary condition: bc_..._b ="..."
122    PA0072            unknown boundary condition: bc_..._t ="..."
123    PA0073            boundary condition: bc_..._b = "..." is not allowed
124                       with prescribed surface flux
125    PA0074            a prescribed surface flux is not allowed
126                       with ..._surface_initial_change (/=0) = ...
127    PA0075            boundary condition: bc_uv_b = "..." is not allowed
128                       with prandtl_layer = .TRUE.
129    PA0076            unknown boundary condition: bc_uv_b = "..."
130    PA0077            unknown boundary condition: bc_uv_t = "..."
131    PA0078            rayleigh_damping_factor = ... out of range [0.0,1.0]
132    PA0079            rayleigh_damping_height = ... out of range [0.0, ...]
133    PA0080            overshoot_limit_... < 0.0 is not allowed
134    PA0081            ups_limit_... < 0.0 is not allowed
135    PA0082            number of statistic_regions = ...  but only
136                      10 regions are allowed
137    PA0083            normalizing_region = ... must be >= 0 and <= ... (value
138                       of statistic_regions)
139    PA0084            dt_sort_particles is reset to 0.0 because of
140                       cloud_droplets = .TRUE.
141    PA0085            averaging_interval = ...  must be <= dt_data_output = ...
142    PA0086            averaging_interval_pr = ...  must be <= dt_dopr = ...
143    PA0087            averaging_interval_sp = ...  must be <= dt_dosp = ...
144    PA0088            dt_averaging_input = ...  must
145                       be <= averaging_interval = ...
146    PA0089            dt_averaging_input_pr = ...  must be
147                       <= averaging_interval_pr = ...
148    PA0090            precipitation_amount_interval = ...  must not be
149                       larger than dt_do2d_xy = ...
150    PA0091            data_output_pr = ...  is not implemented for
151                       ocean = .FALSE.'
152    PA0092            data_output_pr = ... is not implemented for
153                       humidity = .FALSE.'
154    PA0093            data_output_pr = ... is not implemented for
155                       passive_scalar = .FALSE.'
156    PA0094            data_output_pr = ... is not implemented for
157                       cloud_physics = .FALSE.'
158    PA0095            data_output_pr = ... is not implemented for
159                       cloud_physics = .FALSE. and humidity = .FALSE.
160    PA0096            data_output_pr = ... is not implemented for
161                       cloud_physics = .FALSE. or cloud_droplets = .FALSE.
162    PA0097            illegal value for data_output_pr or
163                       data_output_pr_user = "..."       
164    PA0098            illegal value for data_output_pr = "..."
165    PA0099            z_max_do1d = ...  must be >= ... or <= ...
166    PA0100            unknown normalization method cross_normalized_x = "..."
167    PA0101            unknown normalization method cross_normalized_y = "..."
168    PA0102            number of output quantitities given by data_output
169                       and data_output_user exceeds the limit of 100
170    PA0103            output of "..." requires constant_diffusion = .FALSE.
171    PA0104           output of "..." requires a "particles_par"-NAMELIST
172                      in the parameter file (PARIN)
173    PA0105           output of "..." requires humidity = .TRUE.
174    PA0106           output of "" requires cloud_physics = .TRUE. or
175                      cloud_droplets = .TRUE.'
176    PA0107           output of "..." requires cloud_droplets = .TRUE.
177    PA0108           output of "..." requires cloud_physics = .TRUE.
178    PA0109           output of "..." requires ocean = .TRUE.
179    PA0110           output of "..." requires passive_scalar = .TRUE.
180    PA0111           illegal value for data_output: "..." only
181                      2d-horizontal cross sections are allowed for this value
182    PA0112           output of "..." requires precipitation = .TRUE.
183    PA0113           temporal averaging of precipitation amount "..."
184                      is not possible'       
185    PA0114           illegal value for data_output or data_output_user = "..."
186    PA0115           illegal value for data_output = "..."
187    PA0116           z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1))
188                      and <= ... (zu(nzt))
189    PA0117           do3d_compress = .TRUE. not allowed on host ""
190    PA0118           illegal precision: do3d_comp_prec ( ...) = "..."
191    PA0119           unknown variable "..." given for do3d_comp_prec(...)   
192    PA0120           unknown value for data_output_format "..."
193    PA0121           km_constant = ... < 0.0
194    PA0122           prandtl_number = ... < 0.0
195    PA0123           prandtl_layer is not allowed with fixed value of km
196    PA0124           outflow_damping width out of range
197    PA0125           rif_min = ...  must be less than rif_max = ...
198    PA0126           disturbance_level_b = ... must be >= ... (zu(3))
199    PA0127           disturbance_level_b = ... must be <= ... (zu(nzt-2))
200    PA0128           disturbance_level_t = ... must be <= ... (zu(nzt-2))
201    PA0129           disturbance_level_t = ... must
202                      be >= disturbance_level_b = ...
203    PA0130           disturbance_level_ind_t =...  must
204                      be >= disturbance_level_b = ...
205    PA0131           inflow_disturbance_begin out of range
206    PA0132           inflow_disturbance_end out of range
207    PA0133           turbulent_inflow = .T. requires a Dirichlet
208                      condition at the inflow boundary
209    PA0134           illegal value for recycling_width: ...
210    PA0135           unknown random generator: random_generator = "..."
211    PA0136           damp_level_1d = ...  must be > 0.0 and < ... (zu(nzt+1))
212    PA0137           mixing_length_1d = "..." is unknown
213    PA0138           dissipation_1d = "..." is unknown
214    PA0139           termination_time_needed = ...  must be > 30.0 on host ..."
215    PA0140           termination_time_needed = ... should be >= 300.0
216                      on host "..."     
217    PA0141           coupling requires PALM to be called with
218                      ''mrun -K parallel''
219    PA0142           absolute temperature < 0.0 at zu(...) = ...
220    PA0143           k=... j=... i=... ql_c=... part(...)%wf=... 
221                      delta_r=...
222    PA0144           #1 k=... j=... i=... e_s=...  e_a=... t_int=...
223                      d_radius=... delta_r=... particle_radius=... 
224    PA0145           collision_efficiency out of range: ...
225    PA0146           maximum_number_of_particles needs to be increased
226                      but this is not allowed with NetCDF output switched on
227    PA0147           maximum_number_of_tails needs to be increased
228                      but this is not allowed with NetCDF output switched on
229    PA0148           particle too fast.  n = ...
230    PA0149           particle out of range: i=... j=... k=...
231                      nxl=... nxr=... nys=... nyn=... nzb=... nzt=...
[240]232    PA0150           Both dp_external and conserve_volume_flow are .TRUE.
233                      but one of them must be .FALSE.
234    PA0151           dp_level_b = ... is out of range
235    PA0152           dp_external is .TRUE. but dpdxy is zero, i.e. the external
236                      pressure gradient will not be applied
[241]237    PA0153           dpdxy is nonzero but dp_external is .FALSE., i.e. the
238                      external pressure gradient will not be applied
239    PA0154           unknown conserve_volume_flow_mode: ...
240    PA0155           noncyclic boundary conditions require
241                      conserve_volume_flow_mode = ''inflow_profile''
242    PA0156           cyclic boundary conditions require conserve_volume_flow_mode =
243                      ''initial_profiles'' or ''bulk_velocity''
244                      requires noncyclic boundary conditions
245    PA0157           nonzero bulk velocity requires conserve_volume_flow = .T. and
246                      conserve_volume_flow_mode = ''bulk_velocity''
[247]247    PA0158           no vertical boundary condition for variable "..."
248    PA0159           no term for component "..."
249    PA0160           non-cyclic lateral boundaries along x do not allow
250                      calculation of spectra along x
251    PA0161           sorry, calculation of spectra in non parallel mode is
252                      still not realized
253    PA0162           non-cyclic lateral boundaries along y do not allow
254                      calculation of spectra along y
255    PA0163           run will be terminated because it is running out of
256                      job cpu limit remaining time: ... s
257                      termination time needed: ... s
258    PA0164           run will be terminated due to user settings of
259                      restart_time / dt_restart new restart time is: ... s
260    PA0165           re-open of unit 14 is not verified. Please check results!
261    PA0166           re-opening of file-id ... is not allowed
262    PA0167           opening file-id ... not allowed for PE ...
263    PA0168           opening file-id ... is not allowed since it is used otherwise
264    PA0169           no filename for AVS-data-file found in MRUN-config-file
265                      filename in FLD-file set to "unknown"
266    PA0170           no path for batch_scp on host "..." 
267    PA0171           NetCDF: no 64-bit offset allowed on this machine
268    PA0172           no OPEN-statement for file-id ...
[254]269    PA0173           wrong component: ...
270    PA0174           wrong argument  expected: ... given: ...
271    PA0175           no time measurement defined on this host
272    PA0176           negative time interval occured
273                      PE ... L=PAUSE "..." new=...  last=...
274    PA0177           negative time interval occured
275                      PE ... L=STOP "..." new=... last=... isum=...
276    PA0178           negative time interval occured
277                      PE ... L=STOP "..." sum=...  mtime=...
278    PA0179           unknown modus of time measurement: ...
279    PA0180           unknown cross-section: ...
280    PA0181           no output provided for: ...
281    PA0182           no output available for: ...
282    PA0183           if humidity/passive_scalar = FALSE output of ... is not provided
283    PA0184           if cloud_physics = FALSE output of ... is not provided
284    PA0185           data_output_profiles: normalizing cross ...
285                      is not possible since one of the  normalizing factors is zero!
286                      cross_normx_factor(...,...) = ...
287                      cross_normy_factor(...,...) = ...
288    PA0186           no spectra data available
289    PA0187           fft method "..." currently does not work on NEC
290    PA0188           no system-specific fft-call available
291    PA0189           fft method "..." not available
292    PA0190           flow_statistics is called two times within one timestep
293    PA0191           unknown action(s): ...
294    PA0192           timestep has exceeded the lower limit dt_1d = ... s   
295                      simulation stopped!
296    PA0193           unknown initializing problem
297    PA0194           number of time series quantities exceeds its maximum
298                      of dots_max = ... Please increase dots_max in modules.f90.
299    PA0195           dvrp_username is undefined
300    PA0196           dvrp_output="..." not allowed
301    PA0197           dvrp_file="..." not allowed
302    PA0198           mode_dvrp="..." not allowed
303    PA0199           split of communicator not realized with  MPI1 coupling
304                      atmosphere-ocean'
305    PA0200           missing dz
306    PA0201           dz=... <= 0.0
307    PA0202           grid anisotropy exceeds threshold given by only local
308                      horizontal reduction of near_wall mixing length l_wall
309                      starting from height level k = ... .
310    PA0203           inconsistent building parameters: bxl=... bxr=... bys=...
311                      byn=... nx=... ny=...
312    PA0204           no street canyon width given
313    PA0205           inconsistent canyon parameters: cxl=... cxr=...
314                      cwx=... ch=... nx=... ny=...
315    PA0206           inconsistent canyon parameters:... cys=... cyn=...
316                      cwy=... ch=... nx=... ny=...
317    PA0207           inconsistent canyon parameters: street canyon can
318                      only be oriented either in x- or in y-direction
319    PA0208           file TOPOGRAPHY_DATA does not exist
320    PA0209           errors in file TOPOGRAPHY_DATA
321    PA0210           nzb_local values are outside the model domain
322                     MINVAL( nzb_local ) = ...
323                      MAXVAL( nzb_local ) = ...
324    PA0211           nzb_local does not fulfill cyclic boundary condition
325                      in x-direction
326    PA0212           nzb_local does not fulfill cyclic boundary condition
327                      in y-direction   
328    PA0213           max_number_of_particle_groups =...
329                      number_of_particle_groups reset to ...
330    PA0214           version mismatch concerning data from prior run
331                      version on file    = ...
332                      version in program = ...
333    PA0215           particle group # ...  has a density ratio /= 0
334                      but radius = 0
335    PA0216           number of initial particles (...) exceeds
336                      maximum_number_of_particles (...) on PE ...
337    PA0217           unknown boundary condition bc_par_b = "..."
338    PA0218           unknown boundary condition bc_par_t = "..."
339    PA0219           unknown boundary condition bc_par_lr = "..."
340    PA0220           unknown boundary condition bc_par_ns = "..."
341    PA0221           number of PEs of the prescribed topology (...) does not match
342                      the number of PEs available to the job ()
343    PA0222           if the processor topology is prescribed by the user,
344                      both values of "npex" and "npey" must be given
345                      in the NAMELIST-parameter file
346    PA0223           psolver = "poisfft_hybrid" can only be used in case of
347                      a 1d-decomposition along x
348    PA0224           no matching grid for transpositions found
349    PA0225           x-direction: gridpoint number (...)is not an
350                      integral divisor of the number of procesors (...)
351    PA0226           x-direction: nx does not match the requirements given
352                      by the number of PEs used
353                      please use nx = ... instead of nx =...
354    PA0227           y-direction: gridpoint number (...) is not an
355                      integral divisor of the number of processors (...)
356    PA0228           y-direction: ny does not match the requirements given
357                      by the number of PEs used
358                      please use ny = ... instead of ny =...
359    PA0229           1d-decomposition along x chosen but nz restrictions
360                      may occur since ups-scheme is activated
361    PA0230           transposition z --> x:
362                      nz=... is not an integral divisior of pdims(1)= ...
363    PA0231           transposition x --> y:
364                      nx+1=... is not an integral divisor of pdims(2)= ...
365    PA0232           transposition y --> z:
366                      ny+1=... is not an integral divisor of pdims(1)=...
367    PA0233           transposition x --> y:
368                      ny+1=... is not an integral divisor of pdims(1)=...
369    PA0234           direct transposition z --> y (needed for spectra):
370                       nz=... is not an integral divisor of pdims(2)=...
371    PA0235           mg_switch_to_pe0_level out of range and reset to default (=0)     
372    PA0236           not enough memory for storing gathered multigrid data on PE0
373    PA0237           multigrid gather/scatter impossible in non parallel mode
374    PA0238           more than 10 multigrid levels
[256]375    PA0239           The value for "topography_grid_convention" is not set.
[230]376                      Its default value is only valid for
[241]377                      "topography" = ''single_building'',
378                      ''single_street_canyon'' or ''read_from_file''
379                      Choose ''cell_edge'' or ''cell_center''.
[256]380    PA0240           The value for "topography_grid_convention" is not
381                      recognized. Choose ''cell_edge'' or ''cell_center''.
Note: See TracBrowser for help on using the repository browser.