| 1 | List of message identifiers used in PALM message handling routine "message" |
|---|
| 2 | |
|---|
| 3 | PA**** Identifier for messages in the PALM standard code |
|---|
| 4 | UI**** Identifier for messages in "user_" routines |
|---|
| 5 | |
|---|
| 6 | message_identifier message string |
|---|
| 7 | PA0001 "host" is not set. Please check that environment |
|---|
| 8 | variable "localhost" is set before running PALM |
|---|
| 9 | PA0002 illegal coupling mode: ... |
|---|
| 10 | PA0003 dt_coupling is not set but required for coupling |
|---|
| 11 | mode "..." |
|---|
| 12 | PA0004 coupling mode "...": dt_coupling = ... is not equal |
|---|
| 13 | to dt_coupling_remote = ... |
|---|
| 14 | PA0005 coupling mode "...": dt_coupling <= 0.0 is not allowed |
|---|
| 15 | and is reset to MAX(dt_max(A,O)) = ... |
|---|
| 16 | PA0006 coupling mode "...": restart_time = ... is not equal |
|---|
| 17 | to restart_time_remote = ... |
|---|
| 18 | PA0007 coupling mode "...": dt_restart = ... is not equal |
|---|
| 19 | to dt_restart_remote = ... |
|---|
| 20 | PA0008 coupling mode "...": end_time = ... is not equal to |
|---|
| 21 | end_time_remote = ... |
|---|
| 22 | PA0009 coupling mode "...": dx = ... is not equal to |
|---|
| 23 | dx_remote = ... |
|---|
| 24 | PA0010 coupling mode "...": dy = ... is not equal to |
|---|
| 25 | dy_remote = ... |
|---|
| 26 | PA0011 coupling mode "...": nx = ... is not equal to |
|---|
| 27 | nx_remote = ... |
|---|
| 28 | PA0012 coupling mode "...": ny = ... is not equal to |
|---|
| 29 | ny_remote = ... |
|---|
| 30 | PA0013 illegal value given for loop_optimization: "..." |
|---|
| 31 | PA0014 a non-flat topography does not allow ... |
|---|
| 32 | PA0015 ocean = .T. does not allow ... |
|---|
| 33 | PA0016 unknown solver for perturbation pressure: |
|---|
| 34 | psolver = "..." |
|---|
| 35 | PA0017 psolver = "..." only works for a |
|---|
| 36 | 1d domain-decomposition along x |
|---|
| 37 | please do not set npey/=1 in the parameter file' |
|---|
| 38 | PA0018 psolver = ".." does not work for subdomains with |
|---|
| 39 | unequal size please set grid_matching = ''strict'' |
|---|
| 40 | in the parameter file |
|---|
| 41 | PA0019 psolver = "..." only works for a parallel environment |
|---|
| 42 | PA0020 unknown multigrid cycle: cycle_mg = "..." |
|---|
| 43 | PA0021 unknown fft-algorithm: fft_method = "..." |
|---|
| 44 | PA0022 unknown advection scheme: momentum_advec = "..." |
|---|
| 45 | PA0023 momentum_advec = "..." is not allowed with |
|---|
| 46 | timestep_scheme = "..." |
|---|
| 47 | PA0024 unknown advection scheme: scalar_advec = "..." |
|---|
| 48 | PA0025 use_upstream_for_tke set .TRUE. because |
|---|
| 49 | use_sgs_for_particles = .TRUE. |
|---|
| 50 | PA0026 use_upstream_for_tke = .TRUE. not allowed with |
|---|
| 51 | timestep_scheme = "..." |
|---|
| 52 | PA0027 unknown timestep scheme: timestep_scheme = "..." |
|---|
| 53 | PA0028 scalar advection scheme "..." does not work with |
|---|
| 54 | timestep_scheme ".." |
|---|
| 55 | PA0029 momentum advection scheme "..." does not work with |
|---|
| 56 | timestep_scheme "..." |
|---|
| 57 | PA0030 initializing_action = "..." unkown or not allowed |
|---|
| 58 | PA0031 initializing_actions = "set_constant_profiles" and |
|---|
| 59 | "set_1d-model_profiles" are not allowed simultaneously |
|---|
| 60 | PA0032 initializing_actions = "set_constant_profiles" and |
|---|
| 61 | "by_user" are not allowed simultaneously |
|---|
| 62 | PA0033 initializing_actions = "by_user" and |
|---|
| 63 | "set_1d-model_profiles" are not allowed simultaneously |
|---|
| 64 | PA0034 cloud_physics = ... is not allowed with humidity = ... |
|---|
| 65 | PA0035 precipitation = ... is not allowed with |
|---|
| 66 | cloud_physics = ... |
|---|
| 67 | PA0036 humidity = .TRUE. and sloping_surface = .TRUE. are not |
|---|
| 68 | allowed simultaneously |
|---|
| 69 | PA0037 UPS-scheme is not implemented for humidity = .TRUE. |
|---|
| 70 | PA0038 humidity = .TRUE. and passive_scalar = .TRUE. is not |
|---|
| 71 | allowed simultaneously' |
|---|
| 72 | PA0039 UPS-scheme is not implemented for passive_scalar = .TRUE. |
|---|
| 73 | PA0040 illegal value "..." found for parameter grid_matching |
|---|
| 74 | PA0041 plant_canopy = .TRUE. requires a non-zero |
|---|
| 75 | drag coefficient given value is drag_coefficient = 0.0 |
|---|
| 76 | PA0042 use_top_fluxes must be .TRUE. in ocean version |
|---|
| 77 | PA0043 ABS( alpha_surface = ... ) must be < 90.0 |
|---|
| 78 | PA0044 dt = ', dt , ' <= 0.0 |
|---|
| 79 | PA0045 cfl_factor = ... out of range |
|---|
| 80 | 0.0 < cfl_factor <= 1.0 is required |
|---|
| 81 | PA0046 baroclinicity (ug) not allowed simultaneously with |
|---|
| 82 | galilei transformation |
|---|
| 83 | PA0047 baroclinicity (vg) not allowed simultaneously with |
|---|
| 84 | galilei transformation |
|---|
| 85 | PA0048 variable translation speed used for |
|---|
| 86 | galilei-transformation, which may cause instabilities |
|---|
| 87 | in stably stratified regions |
|---|
| 88 | PA0049 unknown boundary condition: bc_lr = "..." |
|---|
| 89 | PA0050 unknown boundary condition: bc_ns = "..." |
|---|
| 90 | PA0051 non-cyclic lateral boundaries do not |
|---|
| 91 | allow psolver = "..." |
|---|
| 92 | PA0052 non-cyclic lateral boundaries do not allow |
|---|
| 93 | momentum_advec = "..." |
|---|
| 94 | PA0053 non-cyclic lateral boundaries do not allow |
|---|
| 95 | scalar_advec = "..." |
|---|
| 96 | PA0054 non-cyclic lateral boundaries do not allow |
|---|
| 97 | galilei_transformation = .T. |
|---|
| 98 | PA0055 adjust_mixing_length = TRUE and bc_e_b = "neumann" |
|---|
| 99 | PA0056 adjust_mixing_length = FALSE and bc_e_b = "..." |
|---|
| 100 | PA0057 boundary condition bc_e_b changed to "..." |
|---|
| 101 | PA0058 unknown boundary condition: bc_e_b = "..." |
|---|
| 102 | PA0059 unknown boundary condition: bc_p_b = "..." |
|---|
| 103 | PA0060 boundary condition: bc_p_b = "..." not allowed with |
|---|
| 104 | prandtl_layer = .FALSE.' |
|---|
| 105 | PA0061 unknown boundary condition: bc_p_t = "..." |
|---|
| 106 | PA0062 unknown boundary condition: bc_pt_b = "..." |
|---|
| 107 | PA0063 unknown boundary condition: bc_pt_t = "..." |
|---|
| 108 | PA0064 both, top_momentumflux_u AND top_momentumflux_v |
|---|
| 109 | must be set |
|---|
| 110 | PA0065 boundary_condition: bc_pt_b = "..." is not allowed |
|---|
| 111 | with constant_heatflux = .TRUE. |
|---|
| 112 | PA0066 constant_heatflux = .TRUE. is not allowed with |
|---|
| 113 | pt_surface_initial_change (/=0) = ... |
|---|
| 114 | PA0067 boundary_condition: bc_pt_t = "..." is not allowed |
|---|
| 115 | with constant_top_heatflux = .TRUE. |
|---|
| 116 | PA0068 unknown boundary condition: bc_sa_t = "..." |
|---|
| 117 | PA0069 boundary condition: bc_sa_t = "..." requires to set |
|---|
| 118 | top_salinityflux |
|---|
| 119 | PA0070 boundary condition: bc_sa_t = "..." is not allowed |
|---|
| 120 | with constant_top_salinityflux = .TRUE.' |
|---|
| 121 | PA0071 unknown boundary condition: bc_..._b ="..." |
|---|
| 122 | PA0072 unknown boundary condition: bc_..._t ="..." |
|---|
| 123 | PA0073 boundary condition: bc_..._b = "..." is not allowed |
|---|
| 124 | with prescribed surface flux |
|---|
| 125 | PA0074 a prescribed surface flux is not allowed |
|---|
| 126 | with ..._surface_initial_change (/=0) = ... |
|---|
| 127 | PA0075 boundary condition: bc_uv_b = "..." is not allowed |
|---|
| 128 | with prandtl_layer = .TRUE. |
|---|
| 129 | PA0076 unknown boundary condition: bc_uv_b = "..." |
|---|
| 130 | PA0077 unknown boundary condition: bc_uv_t = "..." |
|---|
| 131 | PA0078 rayleigh_damping_factor = ... out of range [0.0,1.0] |
|---|
| 132 | PA0079 rayleigh_damping_height = ... out of range [0.0, ...] |
|---|
| 133 | PA0080 overshoot_limit_... < 0.0 is not allowed |
|---|
| 134 | PA0081 ups_limit_... < 0.0 is not allowed |
|---|
| 135 | PA0082 number of statistic_regions = ... but only |
|---|
| 136 | 10 regions are allowed |
|---|
| 137 | PA0083 normalizing_region = ... must be >= 0 and <= ... (value |
|---|
| 138 | of statistic_regions) |
|---|
| 139 | PA0084 dt_sort_particles is reset to 0.0 because of |
|---|
| 140 | cloud_droplets = .TRUE. |
|---|
| 141 | PA0085 averaging_interval = ... must be <= dt_data_output = ... |
|---|
| 142 | PA0086 averaging_interval_pr = ... must be <= dt_dopr = ... |
|---|
| 143 | PA0087 averaging_interval_sp = ... must be <= dt_dosp = ... |
|---|
| 144 | PA0088 dt_averaging_input = ... must |
|---|
| 145 | be <= averaging_interval = ... |
|---|
| 146 | PA0089 dt_averaging_input_pr = ... must be |
|---|
| 147 | <= averaging_interval_pr = ... |
|---|
| 148 | PA0090 precipitation_amount_interval = ... must not be |
|---|
| 149 | larger than dt_do2d_xy = ... |
|---|
| 150 | PA0091 data_output_pr = ... is not implemented for |
|---|
| 151 | ocean = .FALSE.' |
|---|
| 152 | PA0092 data_output_pr = ... is not implemented for |
|---|
| 153 | humidity = .FALSE.' |
|---|
| 154 | PA0093 data_output_pr = ... is not implemented for |
|---|
| 155 | passive_scalar = .FALSE.' |
|---|
| 156 | PA0094 data_output_pr = ... is not implemented for |
|---|
| 157 | cloud_physics = .FALSE.' |
|---|
| 158 | PA0095 data_output_pr = ... is not implemented for |
|---|
| 159 | cloud_physics = .FALSE. and humidity = .FALSE. |
|---|
| 160 | PA0096 data_output_pr = ... is not implemented for |
|---|
| 161 | cloud_physics = .FALSE. or cloud_droplets = .FALSE. |
|---|
| 162 | PA0097 illegal value for data_output_pr or |
|---|
| 163 | data_output_pr_user = "..." |
|---|
| 164 | PA0098 illegal value for data_output_pr = "..." |
|---|
| 165 | PA0099 z_max_do1d = ... must be >= ... or <= ... |
|---|
| 166 | PA0100 unknown normalization method cross_normalized_x = "..." |
|---|
| 167 | PA0101 unknown normalization method cross_normalized_y = "..." |
|---|
| 168 | PA0102 number of output quantitities given by data_output |
|---|
| 169 | and data_output_user exceeds the limit of 100 |
|---|
| 170 | PA0103 output of "..." requires constant_diffusion = .FALSE. |
|---|
| 171 | PA0104 output of "..." requires a "particles_par"-NAMELIST |
|---|
| 172 | in the parameter file (PARIN) |
|---|
| 173 | PA0105 output of "..." requires humidity = .TRUE. |
|---|
| 174 | PA0106 output of "" requires cloud_physics = .TRUE. or |
|---|
| 175 | cloud_droplets = .TRUE.' |
|---|
| 176 | PA0107 output of "..." requires cloud_droplets = .TRUE. |
|---|
| 177 | PA0108 output of "..." requires cloud_physics = .TRUE. |
|---|
| 178 | PA0109 output of "..." requires ocean = .TRUE. |
|---|
| 179 | PA0110 output of "..." requires passive_scalar = .TRUE. |
|---|
| 180 | PA0111 illegal value for data_output: "..." only |
|---|
| 181 | 2d-horizontal cross sections are allowed for this value |
|---|
| 182 | PA0112 output of "..." requires precipitation = .TRUE. |
|---|
| 183 | PA0113 temporal averaging of precipitation amount "..." |
|---|
| 184 | is not possible' |
|---|
| 185 | PA0114 illegal value for data_output or data_output_user = "..." |
|---|
| 186 | PA0115 illegal value for data_output = "..." |
|---|
| 187 | PA0116 z_max_do2d = ', z_max_do2d must be >= ... (zu(nzb+1)) |
|---|
| 188 | and <= ... (zu(nzt)) |
|---|
| 189 | PA0117 do3d_compress = .TRUE. not allowed on host "" |
|---|
| 190 | PA0118 illegal precision: do3d_comp_prec ( ...) = "..." |
|---|
| 191 | PA0119 unknown variable "..." given for do3d_comp_prec(...) |
|---|
| 192 | PA0120 unknown value for data_output_format "..." |
|---|
| 193 | PA0121 km_constant = ... < 0.0 |
|---|
| 194 | PA0122 prandtl_number = ... < 0.0 |
|---|
| 195 | PA0123 prandtl_layer is not allowed with fixed value of km |
|---|
| 196 | PA0124 outflow_damping width out of range |
|---|
| 197 | PA0125 rif_min = ... must be less than rif_max = ... |
|---|
| 198 | PA0126 disturbance_level_b = ... must be >= ... (zu(3)) |
|---|
| 199 | PA0127 disturbance_level_b = ... must be <= ... (zu(nzt-2)) |
|---|
| 200 | PA0128 disturbance_level_t = ... must be <= ... (zu(nzt-2)) |
|---|
| 201 | PA0129 disturbance_level_t = ... must |
|---|
| 202 | be >= disturbance_level_b = ... |
|---|
| 203 | PA0130 disturbance_level_ind_t =... must |
|---|
| 204 | be >= disturbance_level_b = ... |
|---|
| 205 | PA0131 inflow_disturbance_begin out of range |
|---|
| 206 | PA0132 inflow_disturbance_end out of range |
|---|
| 207 | PA0133 turbulent_inflow = .T. requires a Dirichlet |
|---|
| 208 | condition at the inflow boundary |
|---|
| 209 | PA0134 illegal value for recycling_width: ... |
|---|
| 210 | PA0135 unknown random generator: random_generator = "..." |
|---|
| 211 | PA0136 damp_level_1d = ... must be > 0.0 and < ... (zu(nzt+1)) |
|---|
| 212 | PA0137 mixing_length_1d = "..." is unknown |
|---|
| 213 | PA0138 dissipation_1d = "..." is unknown |
|---|
| 214 | PA0139 termination_time_needed = ... must be > 30.0 on host ..." |
|---|
| 215 | PA0140 termination_time_needed = ... should be >= 300.0 |
|---|
| 216 | on host "..." |
|---|
| 217 | PA0141 coupling requires PALM to be called with |
|---|
| 218 | ''mrun -K parallel'' |
|---|
| 219 | PA0142 absolute temperature < 0.0 at zu(...) = ... |
|---|
| 220 | PA0143 k=... j=... i=... ql_c=... part(...)%wf=... |
|---|
| 221 | delta_r=... |
|---|
| 222 | PA0144 #1 k=... j=... i=... e_s=... e_a=... t_int=... |
|---|
| 223 | d_radius=... delta_r=... particle_radius=... |
|---|
| 224 | PA0145 collision_efficiency out of range: ... |
|---|
| 225 | PA0146 maximum_number_of_particles needs to be increased |
|---|
| 226 | but this is not allowed with NetCDF output switched on |
|---|
| 227 | PA0147 maximum_number_of_tails needs to be increased |
|---|
| 228 | but this is not allowed with NetCDF output switched on |
|---|
| 229 | PA0148 particle too fast. n = ... |
|---|
| 230 | PA0149 particle out of range: i=... j=... k=... |
|---|
| 231 | nxl=... nxr=... nys=... nyn=... nzb=... nzt=... |
|---|
| 232 | PA0150 Both dp_external and conserve_volume_flow are .TRUE. |
|---|
| 233 | but one of them must be .FALSE. |
|---|
| 234 | PA0151 dp_level_b = ... is out of range |
|---|
| 235 | PA0152 dp_external is .TRUE. but dpdxy is zero, i.e. the external |
|---|
| 236 | pressure gradient will not be applied |
|---|
| 237 | PA0153 dpdxy is nonzero but dp_external is .FALSE., i.e. the |
|---|
| 238 | external pressure gradient will not be applied |
|---|
| 239 | PA0154 unknown conserve_volume_flow_mode: ... |
|---|
| 240 | PA0155 noncyclic boundary conditions require |
|---|
| 241 | conserve_volume_flow_mode = ''inflow_profile'' |
|---|
| 242 | PA0156 cyclic boundary conditions require conserve_volume_flow_mode = |
|---|
| 243 | ''initial_profiles'' or ''bulk_velocity'' |
|---|
| 244 | requires noncyclic boundary conditions |
|---|
| 245 | PA0157 nonzero bulk velocity requires conserve_volume_flow = .T. and |
|---|
| 246 | conserve_volume_flow_mode = ''bulk_velocity'' |
|---|
| 247 | PA0158 no vertical boundary condition for variable "..." |
|---|
| 248 | PA0159 no term for component "..." |
|---|
| 249 | PA0160 non-cyclic lateral boundaries along x do not allow |
|---|
| 250 | calculation of spectra along x |
|---|
| 251 | PA0161 sorry, calculation of spectra in non parallel mode is |
|---|
| 252 | still not realized |
|---|
| 253 | PA0162 non-cyclic lateral boundaries along y do not allow |
|---|
| 254 | calculation of spectra along y |
|---|
| 255 | PA0163 run will be terminated because it is running out of |
|---|
| 256 | job cpu limit remaining time: ... s |
|---|
| 257 | termination time needed: ... s |
|---|
| 258 | PA0164 run will be terminated due to user settings of |
|---|
| 259 | restart_time / dt_restart new restart time is: ... s |
|---|
| 260 | PA0165 re-open of unit 14 is not verified. Please check results! |
|---|
| 261 | PA0166 re-opening of file-id ... is not allowed |
|---|
| 262 | PA0167 opening file-id ... not allowed for PE ... |
|---|
| 263 | PA0168 opening file-id ... is not allowed since it is used otherwise |
|---|
| 264 | PA0169 no filename for AVS-data-file found in MRUN-config-file |
|---|
| 265 | filename in FLD-file set to "unknown" |
|---|
| 266 | PA0170 no path for batch_scp on host "..." |
|---|
| 267 | PA0171 NetCDF: no 64-bit offset allowed on this machine |
|---|
| 268 | PA0172 no OPEN-statement for file-id ... |
|---|
| 269 | PA0173 wrong component: ... |
|---|
| 270 | PA0174 wrong argument expected: ... given: ... |
|---|
| 271 | PA0175 no time measurement defined on this host |
|---|
| 272 | PA0176 negative time interval occured |
|---|
| 273 | PE ... L=PAUSE "..." new=... last=... |
|---|
| 274 | PA0177 negative time interval occured |
|---|
| 275 | PE ... L=STOP "..." new=... last=... isum=... |
|---|
| 276 | PA0178 negative time interval occured |
|---|
| 277 | PE ... L=STOP "..." sum=... mtime=... |
|---|
| 278 | PA0179 unknown modus of time measurement: ... |
|---|
| 279 | PA0180 unknown cross-section: ... |
|---|
| 280 | PA0181 no output provided for: ... |
|---|
| 281 | PA0182 no output available for: ... |
|---|
| 282 | PA0183 if humidity/passive_scalar = FALSE output of ... is not provided |
|---|
| 283 | PA0184 if cloud_physics = FALSE output of ... is not provided |
|---|
| 284 | PA0185 data_output_profiles: normalizing cross ... |
|---|
| 285 | is not possible since one of the normalizing factors is zero! |
|---|
| 286 | cross_normx_factor(...,...) = ... |
|---|
| 287 | cross_normy_factor(...,...) = ... |
|---|
| 288 | PA0186 no spectra data available |
|---|
| 289 | PA0187 fft method "..." currently does not work on NEC |
|---|
| 290 | PA0188 no system-specific fft-call available |
|---|
| 291 | PA0189 fft method "..." not available |
|---|
| 292 | PA0190 flow_statistics is called two times within one timestep |
|---|
| 293 | PA0191 unknown action(s): ... |
|---|
| 294 | PA0192 timestep has exceeded the lower limit dt_1d = ... s |
|---|
| 295 | simulation stopped! |
|---|
| 296 | PA0193 unknown initializing problem |
|---|
| 297 | PA0194 number of time series quantities exceeds its maximum |
|---|
| 298 | of dots_max = ... Please increase dots_max in modules.f90. |
|---|
| 299 | PA0195 dvrp_username is undefined |
|---|
| 300 | PA0196 dvrp_output="..." not allowed |
|---|
| 301 | PA0197 dvrp_file="..." not allowed |
|---|
| 302 | PA0198 mode_dvrp="..." not allowed |
|---|
| 303 | PA0199 split of communicator not realized with MPI1 coupling |
|---|
| 304 | atmosphere-ocean' |
|---|
| 305 | PA0200 missing dz |
|---|
| 306 | PA0201 dz=... <= 0.0 |
|---|
| 307 | PA0202 grid anisotropy exceeds threshold given by only local |
|---|
| 308 | horizontal reduction of near_wall mixing length l_wall |
|---|
| 309 | starting from height level k = ... . |
|---|
| 310 | PA0203 inconsistent building parameters: bxl=... bxr=... bys=... |
|---|
| 311 | byn=... nx=... ny=... |
|---|
| 312 | PA0204 no street canyon width given |
|---|
| 313 | PA0205 inconsistent canyon parameters: cxl=... cxr=... |
|---|
| 314 | cwx=... ch=... nx=... ny=... |
|---|
| 315 | PA0206 inconsistent canyon parameters:... cys=... cyn=... |
|---|
| 316 | cwy=... ch=... nx=... ny=... |
|---|
| 317 | PA0207 inconsistent canyon parameters: street canyon can |
|---|
| 318 | only be oriented either in x- or in y-direction |
|---|
| 319 | PA0208 file TOPOGRAPHY_DATA does not exist |
|---|
| 320 | PA0209 errors in file TOPOGRAPHY_DATA |
|---|
| 321 | PA0210 nzb_local values are outside the model domain |
|---|
| 322 | MINVAL( nzb_local ) = ... |
|---|
| 323 | MAXVAL( nzb_local ) = ... |
|---|
| 324 | PA0211 nzb_local does not fulfill cyclic boundary condition |
|---|
| 325 | in x-direction |
|---|
| 326 | PA0212 nzb_local does not fulfill cyclic boundary condition |
|---|
| 327 | in y-direction |
|---|
| 328 | PA0213 max_number_of_particle_groups =... |
|---|
| 329 | number_of_particle_groups reset to ... |
|---|
| 330 | PA0214 version mismatch concerning data from prior run |
|---|
| 331 | version on file = ... |
|---|
| 332 | version in program = ... |
|---|
| 333 | PA0215 particle group # ... has a density ratio /= 0 |
|---|
| 334 | but radius = 0 |
|---|
| 335 | PA0216 number of initial particles (...) exceeds |
|---|
| 336 | maximum_number_of_particles (...) on PE ... |
|---|
| 337 | PA0217 unknown boundary condition bc_par_b = "..." |
|---|
| 338 | PA0218 unknown boundary condition bc_par_t = "..." |
|---|
| 339 | PA0219 unknown boundary condition bc_par_lr = "..." |
|---|
| 340 | PA0220 unknown boundary condition bc_par_ns = "..." |
|---|
| 341 | PA0221 number of PEs of the prescribed topology (...) does not match |
|---|
| 342 | the number of PEs available to the job () |
|---|
| 343 | PA0222 if the processor topology is prescribed by the user, |
|---|
| 344 | both values of "npex" and "npey" must be given |
|---|
| 345 | in the NAMELIST-parameter file |
|---|
| 346 | PA0223 psolver = "poisfft_hybrid" can only be used in case of |
|---|
| 347 | a 1d-decomposition along x |
|---|
| 348 | PA0224 no matching grid for transpositions found |
|---|
| 349 | PA0225 x-direction: gridpoint number (...)is not an |
|---|
| 350 | integral divisor of the number of procesors (...) |
|---|
| 351 | PA0226 x-direction: nx does not match the requirements given |
|---|
| 352 | by the number of PEs used |
|---|
| 353 | please use nx = ... instead of nx =... |
|---|
| 354 | PA0227 y-direction: gridpoint number (...) is not an |
|---|
| 355 | integral divisor of the number of processors (...) |
|---|
| 356 | PA0228 y-direction: ny does not match the requirements given |
|---|
| 357 | by the number of PEs used |
|---|
| 358 | please use ny = ... instead of ny =... |
|---|
| 359 | PA0229 1d-decomposition along x chosen but nz restrictions |
|---|
| 360 | may occur since ups-scheme is activated |
|---|
| 361 | PA0230 transposition z --> x: |
|---|
| 362 | nz=... is not an integral divisior of pdims(1)= ... |
|---|
| 363 | PA0231 transposition x --> y: |
|---|
| 364 | nx+1=... is not an integral divisor of pdims(2)= ... |
|---|
| 365 | PA0232 transposition y --> z: |
|---|
| 366 | ny+1=... is not an integral divisor of pdims(1)=... |
|---|
| 367 | PA0233 transposition x --> y: |
|---|
| 368 | ny+1=... is not an integral divisor of pdims(1)=... |
|---|
| 369 | PA0234 direct transposition z --> y (needed for spectra): |
|---|
| 370 | nz=... is not an integral divisor of pdims(2)=... |
|---|
| 371 | PA0235 mg_switch_to_pe0_level out of range and reset to default (=0) |
|---|
| 372 | PA0236 not enough memory for storing gathered multigrid data on PE0 |
|---|
| 373 | PA0237 multigrid gather/scatter impossible in non parallel mode |
|---|
| 374 | PA0238 more than 10 multigrid levels |
|---|
| 375 | PA0239 The value for "topography_grid_convention" is not set. |
|---|
| 376 | Its default value is only valid for |
|---|
| 377 | "topography" = ''single_building'', |
|---|
| 378 | ''single_street_canyon'' or ''read_from_file'' |
|---|
| 379 | Choose ''cell_edge'' or ''cell_center''. |
|---|
| 380 | PA0240 The value for "topography_grid_convention" is not |
|---|
| 381 | recognized. Choose ''cell_edge'' or ''cell_center''. |
|---|
