Home

Context Navigation

parlist

Timestamp:: Feb 11, 2021 5:22:45 PM (4 years ago)
Author:: wagner
Comment:: --

Legend:

: Unmodified
: Added
: Removed
: Modified

doc/app/parlist

-                      v286
+                      v287
 || [../initialization_parameters#rayleigh_damping_height rayleigh_damping] \\ [../initialization_parameters#rayleigh_damping_height _height] || ini || R || 2/3*zu(nzt),\\ (ocean: 2/3*zu(nzb)) || Height where the Rayleigh damping starts (in m).
 || [../chemistry_parameters#rcntrl rcntrl] || chem || R(20) || 0.0 ||  Steering of the chemistry solver.
-|| [../wind_turbine_parameters#region_15_min region_15_min] || wtm || R ||70.16224|| Lower generator speed boundary of region 1.5 (in rad/s).
-|| [../wind_turbine_parameters#region_2_min region_2_min] || wtm || R ||91.21091|| Lower generator speed boundary of region 2 [rad/s].
 || [../agent_parameters#read_agents_from_restartfile read_agents_from] \\ [../agent_parameters#read_agents_from_restartfile _restartfile] || agt || L ||.F.|| Flag to read agent data from restart file.
 || [../particle_parameters#read_particles_from_restartfile read_particles_from] \\ [../particle_parameters#read_particles_from_restartfile _restartfile] || lpm || L || .T. || Read particle data from the previous run.
 || [../initialization_parameters#recycling_width recycling_width] || ini || R || 9999999.9 || Distance of the recycling plane from the inflow boundary (in m).
 || [../initialization_parameters#reference_state reference_state] || ini || C*20 || '' 'initial_profile' '' || Defines what is used as reference state in the buoyancy term.
+|| [../user_parameters#region region] || user || C*40(0:9) |||| Name(s) of the subdomain(s) defined by the user.
+|| [../wind_turbine_parameters#region_2_slope region_2_slope] || wtm || R ||2.332.287|| Slope constant for region 2.
+|| [../user_parameters#region region] || user || C*40(0:9) || 'total domain' || Name(s) of the subdomain(s) defined by the user.
+|| [../wind_turbine_parameters#region_15_min region_15_min] || wtm || R ||70.16224|| Lower generator speed boundary of region 1.5 (in rad/s).
+|| [../wind_turbine_parameters#region_2_min region_2_min] || wtm || R ||91.21091|| Lower generator speed boundary of region 2 [rad/s].
+|| [../wind_turbine_parameters#region_2_slope region_2_slope] || wtm || R ||2.332287|| Slope constant for region 2.
 || [../salsa_parameters#reglim reglim]  || salsa || R(3) || 3.0E-9, 5.0E-8, 1.0E-5  || Aerosol diameter limits for the subranges (in m) in the following order: lower limit of 1, upper limit of 1 and lower limit of 2, upper limit of 2.
 || [../agent_parameters#repuls_agent repuls_agent] || agt || R ||1.5|| Magnitude of the repulsive force agents exert on each other (in m^2^ s^-2^).
 || [../agent_parameters#repuls_wall repuls_wall] || agt || R ||7.0|| Magnitude of the repulsive force obstacles exert on agents (in m^2^ s^-2^).
 || [../initialization_parameters#residual_limit residual_limit] || ini || R || 1.0E-6 || Largest residual permitted for the multigrid scheme (in s^-2^m^-3^).
+|| [../initialization_parameters#residual_limit residual_limit] || ini || R || 1.0E-4 || Largest residual permitted for the multigrid scheme (in s^-2^m^-3^).
 || [../land_surface_parameters#residual_moisture residual_moisture] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Residual soil moisture content (in m³/m³). ||
 || [../runtime_parameters#restart_data_format restart_data_format] || ini/run || C*20 || 'fortran_binary' || Binary format of the input and output restart files. ||
 || [../runtime_parameters#restart_data_format_input restart_data_format_input] || ini/run || C*20 || value of [../runtime_parameters#restart_data_format restart_data_format] || Binary format of the input restart file. ||
 || [../runtime_parameters#restart_data_format_output restart_data_format_output] || ini/run || C*20 || value of [../runtime_parameters#restart_data_format restart_data_format] || Binary format of the output restart file. ||
+|| [../initialization_parameters#restart_data_format restart_data_format] || ini || C*20 || 'fortran_binary' || Binary format of the input and output restart files. ||
+|| [../initialization_parameters#restart_data_format_input restart_data_format_input] || ini || C*20 || value of [../runtime_parameters#restart_data_format restart_data_format] || Binary format of the input restart file. ||
+|| [../initialization_parameters#restart_data_format_output restart_data_format_output] || ini || C*20 || value of [../runtime_parameters#restart_data_format restart_data_format] || Binary format of the output restart file. ||
 || [../runtime_parameters#restart_time restart_time] || run || R || 9999999.9 || Simulated time after which a restart run is to be carried out (in s).
+|| [../particle_parameters#rm rm]|| lpm || R(3) || 0.05E-6 || Parameters of initial aerosol spectrum.
+|| [../land_surface_parameters#root_fraction root_fraction] || lsm || R(4) || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Root distribution over the four soil layers.
+|| [../particle_parameters#rm rm] || lpm || R(3) || 0.05E-6 || Parameters of initial aerosol spectrum.
+|| [../land_surface_parameters#root_fraction root_fraction] || lsm || R(21) || 9999999.9 || Root distribution over the four soil layers.
+|| [../wind_turbine_parameters#rotor_inertia rotor_inertia] || wtm || R || 34784179.0 || Inertia of the rotor (in kg/m^2).
+|| [../wind_turbine_parameters#rotor_radius rotor_radius] || wtm || R(100) ||63.0|| Radius of the rotor (in m).
+|| [../wind_turbine_parameters#rotor_speed rotor_speed] || wtm || R(100) || 0.9 || Initial rotational speed for each turbine (in rad s^-1^).
 || [../initialization_parameters#roughness_length roughness_length] || ini || R || 0.1 || Roughness length (in m).
-|| [../wind_turbine_parameters#rotor_inertia rotor_inertia] || wtm || R || 34784179.0 || Inertia of the rotor (in kg/m^2).
-|| [../wind_turbine_parameters#rotor_radius rotor_radius] || wtm || R(100) ||63|| Radius of the rotor (in m).
-|| [../wind_turbine_parameters#rotor_speed rotor_speed] || wtm || R(100) || 0.0 || Initial rotational speed for each turbine (in rad s^-1^).
 || [../initialization_parameters#s_surface s_surface] [=#s] || ini || R || 0.0 || Surface value of the passive scalar (in kg m^-3^ or ppm).
 || [../initialization_parameters#s_surface_initial_change s_surface_initial] \\ [../initialization_parameters#s_surface_initial_change _change] || ini || R || 0.0 || Change in surface scalar concentration to be made at the beginning of the 3d run (in kg m^-3^ or ppm).
 …
 || [../runtime_parameters#skip_time_do2d_yz skip_time_do2d_yz] || run || R || value of [../runtime_parameters#skip_time_data_output skip_time] \\ [../runtime_parameters#skip_time_data_output _data_output] || No output of instantaneous vertical (yz) cross section data before this interval has passed (in s).
 || [../runtime_parameters#skip_time_do3d skip_time_do3d] || run || R || value of [../runtime_parameters#skip_time_data_output skip_time] \\ [../runtime_parameters#skip_time_data_output _data_output] || No output of instantaneous 3d volume data before this interval has passed (in s).
 || [../land_surface_parameters#soil_moisture soil_moisture] || lsm || R(4) || 4*0.0 || Soil moisture distribution over the four soil layers.
 || [../land_surface_parameters#soil_temperature soil_temperature] || lsm || R(5) || see description || Soil temperature distribution over the four soil layers (in K).
+|| [../land_surface_parameters#soil_moisture soil_moisture] || lsm || R(21) || 21*0.0 || Soil moisture distribution over the four soil layers.
+|| [../land_surface_parameters#soil_temperature soil_temperature] || lsm || R(21) || 21*9999999.9 || Soil temperature distribution over the four soil layers (in K).
 || [../land_surface_parameters#soil_type soil_type] || lsm || I ||3|| Soil type to be used in the soil model.
 || [../spectra_parameters#spectra_direction spectra_direction] || spec || C*2(10) || 10*' ' || Direction(s) along which spectra are to be calculated.
 …
 || [../wind_turbine_parameters#speed_control speed_control] || wtm || L || .F. || Parameter to switch on the speed control.
 || [../initialization_parameters#spinup_pt_amplitude spinup_pt_amplitude] || ini || R || 0.0 || Representative amplitude of the diurnal near-surface temperature variation during the spinup phase.
 || [../initialization_parameters#spinup_pt_mean spinup_pt_mean] || ini || R || [value of] [pt_surface] || Mean near-surface air temperature during the spinup phase (see spinup_time).
+|| [../initialization_parameters#spinup_pt_mean spinup_pt_mean] || ini || R || value of [../initialization_parameters#pt_surface pt_surface] || Mean near-surface air temperature during the spinup phase (see spinup_time).
 || [../initialization_parameters#spinup_time spinup_time] || ini || R || 0.0 || Parameter for steering of the spinup time.
 || [../initialization_parameters#statistic_regions statistic_regions] || ini || I ||0|| Number of additional user-defined subdomains for which statistical analysis and corresponding output (profiles, time series) shall be made.
 …
 || [../initialization_parameters#surface_heatflux surface_heatflux] || ini || R || no prescribed \\ heatflux || Kinematic sensible heat flux at the bottom surface (in K m/s).
 || [../initialization_parameters#surface_pressure surface_pressure] || ini || R || 1013.25 || Atmospheric pressure at the surface (in hPa).
 || [../initialization_parameters#surface_scalarflux surface_scalarflux] || ini || R || 0.0 || Scalar flux at the surface (in kg m^-2^ s^-1^ or ppm m s^-1^).
 || [../initialization_parameters#surface_waterflux surface_waterflux] || ini || R || 0.0 || Kinematic water flux near the surface (in m/s).
+|| [../initialization_parameters#surface_scalarflux surface_scalarflux] || ini || R || 999999.9 || Scalar flux at the surface (in kg m^-2^ s^-1^ or ppm m s^-1^).
+|| [../initialization_parameters#surface_waterflux surface_waterflux] || ini || R || 9999999.9 || Kinematic water flux near the surface (in m/s).
 || [../radiation_parameters#sw_radiation sw_radiation] || rrtmg || L || .T. || Parameter to switch on/off shortwave radiation.
 || [../runtime_parameters#synchronous_exchange synchronous_exchange] || run || L || .F. || Defines how MPI handles the exchange of ghost points.
 …
 || [../biometeorology_parameters#thermal_comfort thermal_comfort] || biomet || L || .F. || Switch the calculation of all three thermal comfort indices off (.F.) or on (.T.).
 || [../wind_turbine_parameters#tilt_angle tilt_angle] || wtm || R || 0.0 || Rotor tilt_angle of the rotor plane (in degrees).
 || [../chemistry_parameters#time_fac_type time_fac_type] || chem || C*80 || MDH ||  Type of time treatment for DEFAULT mode of the chem_emission module.
+|| [../chemistry_parameters#time_fac_type time_fac_type] || chem || C*80 || MDH ||  Type of time treatment for LOD 1 mode of the chem_emission module.
 || [../wind_turbine_parameters#time_turbine_on time_turbine_on] || wtm || R || 0.0 || Simulation time at which the turbines are switched on.
-|| [../radiation_parameters#time_utc_init time_utc_init] || rrtmg || R || 43200.0 || UTC time at model start in seconds starting from midnight.
 || [../initialization_parameters#timestep_scheme timestep_scheme] || ini || C*20 || 'runge-kutta-3' || Time step scheme to be used for integration of the prognostic variables.
 || [../wind_turbine_parameters#tip_loss_correction] || wtm || L || .F. || Parameter to switch on the tip loss correction.
+|| [../wind_turbine_parameters#tip_loss_correction tip_loss_correction] || wtm || L || .F. || Parameter to switch on the tip loss correction.
 || [../initialization_parameters#topography topography] || ini || C*40 || 'flat' || Topography mode.
 || [../initialization_parameters#topography_grid_convention topography_grid] \\ [../initialization_parameters#topography_grid_convention _convention] || ini || C*11 || default depends on \\ value of [../initialization_parameters#topography topography] || Convention for defining the topography grid.
 …
 || [../ocean_parameters#top_salinityflux top_salinityflux] || ocean || R || no prescribed \\ salinityflux || Kinematic salinity flux at the top boundary, i.e. the sea surface (in psu m/s).
 || [../initialization_parameters#top_scalarflux top_scalarflux] || ini || R || no prescribed \\ scalarflux || Scalar flux at the top surface (in kg m^-2^ s^-1^ or ppm m s^-1^).
 || [../wind_turbine_parameters#tower_cd tower_cd] || wtm || R(100) || none ||Drag coefficient for each tower. This parameter needs to be specified for each turbine.
 || [../wind_turbine_parameters#tower_diameter tower_diameter] || wtm || R(100) || none || Diameter of the tower of the wind turbine used below the rotor. This parameter has to be non-zero if a tower should be included. The parameter needs to be specified for every turbine separately.
+|| [../wind_turbine_parameters#tower_cd tower_cd] || wtm || R(n_turbines_max) || 1.2 ||Drag coefficient for each tower. This parameter needs to be specified for each turbine.
+|| [../wind_turbine_parameters#tower_diameter tower_diameter] || wtm || R(n_turbines_max) || 0.0 || Diameter of the tower of the wind turbine used below the rotor. This parameter has to be non-zero if a tower should be included. The parameter needs to be specified for every turbine separately.
 || [../initialization_parameters#transpose_compute_overlap transpose_compute] \\ [../initialization_parameters#transpose_compute_overlap _overlap] || ini || L || .F. || Parameter to switch on parallel execution of fft and transpositions (with MPI_ALLTOALL).
 || [../initialization_parameters#tunnel_height tunnel_height] || ini || R || 0.2*nz || Height of outer-wall tunnel top.
+|| [../initialization_parameters#tunnel_height tunnel_height] || ini || R || 9999999.9 || Height of outer-wall tunnel top.
 || [../initialization_parameters#tunnel_length tunnel_length] || ini || R || 9999999.9 || Length of the tunnel.
 || [../initialization_parameters#tunnel_width_x tunnel_width_x] || ini || R || 9999999.9 || Tunnel width along x-direction.
 …
 || [../initialization_parameters#vg_vertical_gradient_level vg_vertical_gradient] \\ [../initialization_parameters#vg_vertical_gradient_level _level] || ini || R(10) || 10*0.0 || Height level above which the gradient defined by [../initialization_parameters#vg_vertical_gradient vg_vertical_gradient] is effective (in m).
 || [../initialization_parameters#wall_adjustment wall_adjustment] [=#w] || ini || L || .T. || Parameter to restrict the mixing length in the vicinity of the bottom boundary (and near vertical walls of a non-flat [../initialization_parameters#topography topography]).
 || [../initialization_parameters#wall_heatflux wall_heatflux] || ini || R(5) || 5*0.0 || Prescribed kinematic sensible heat flux in K m/s at the five topography faces.
 || [../initialization_parameters#wall_humidityflux wall_humidityflux] || ini || R(5) || 5*0.0 || Prescribed kinematic humidity flux in m/s at the five topography faces.
 || [../ocean_parameters#wall_salinityflux wall_salinityflux] || ocean || R(0:5) || 6*0.0 || Prescribed kinematic salinity flux in Psu m/s at the six topography faces
 || [../initialization_parameters#wall_scalarflux wall_scalarflux] || ini || R(5) || 5*0.0 || Prescribed scalar flux at the five topography faces (in kg m^-2^ s^-1^ or ppm m s^-1^).
+|| [../initialization_parameters#wall_heatflux wall_heatflux] || ini || R(6) || 6*0.0 || Prescribed kinematic sensible heat flux in K m/s at the five topography faces.
+|| [../initialization_parameters#wall_humidityflux wall_humidityflux] || ini || R(6) || 6*0.0 || Prescribed kinematic humidity flux in m/s at the five topography faces.
+|| [../ocean_parameters#wall_salinityflux wall_salinityflux] || ocean || R(6) || 6*0.0 || Prescribed kinematic salinity flux in Psu m/s at the six topography faces
+|| [../initialization_parameters#wall_scalarflux wall_scalarflux] || ini || R(6) || 6*0.0 || Prescribed scalar flux at the five topography faces (in kg m^-2^ s^-1^ or ppm m s^-1^).
 || [../ocean_parameters#wave_breaking wave_breaking] || ocean || L || .F. || Parameter to switch on turbulence generation by wave breaking.
 || [../land_surface_parameters#wilting_point wilting_point] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Soil moisture at permanent wilting point (in m³/m³).
 …
 || [../wind_turbine_parameters#yaw_speed yaw_speed] || wtm || R || 0.005236 || Speed of the yaw actuator (in rad/s).
 || [../initialization_parameters#y_shift y_shift] || ini || I ||0|| Distance of y-shift for cyclic and non-cyclic boundary conditions (in number of PEs).
-|| [../land_surface_parameters#z0_eb z0_eb] [=#z] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for momentum (in m).
-|| [../land_surface_parameters#z0h_eb z0h_eb] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for heat (in m).
-|| [../land_surface_parameters#z0q_eb z0q_eb] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for moisture (in m).
 || [../initialization_parameters#z0h_factor z0h_factor] || ini || R || 1.0 || Factor for calculating the roughness length for scalars.
 || [../initialization_parameters#zeta_max zeta_max] || ini || R || 20.0 || Upper limit of the stability parameter {{{zeta = z_mo/L}}}.
+|| [../initialization_parameters#zeta_min zeta_min] || ini || R || -9990.0 || Lower limit of the stability parameter {{{zeta = z_mo/L}}}.
+|| [../land_surface_parameters#zs zs] || lsm || R(4) || see description || Depths of the four soil layers (in m).
+|| [../initialization_parameters#zeta_min zeta_min] || ini || R || -20.0 || Lower limit of the stability parameter {{{zeta = z_mo/L}}}.