Changes between Version 283 and Version 284 of doc/app/parlist

Timestamp:

Feb 5, 2021 9:53:32 AM (4 years ago)

Author:

wagner

Comment:

--

doc/app/parlist

@@ -119 +119 @@
 || [../plant_canopy_parameters#canopy_mode canopy_mode] || pcm || C*20 || 'homogeneous' || Canopy mode. 
 || [../initialization_parameters#canyon_height canyon_height] || ini || R || 50.0 || Street canyon height in m. 
-|| [../land_surface_parameters#canopy_resistance_coefficient canopy_resistance] \\ [../land_surface_parameters#canopy_resistance_coefficient _coefficient] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || A coefficient (in 1/hPa) for the dependence of the canopy resistance on water vapor pressure deficit. 
+|| [../land_surface_parameters#canopy_resistance_coefficient canopy_resistance] \\ [../land_surface_parameters#canopy_resistance_coefficient _coefficient] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || A coefficient (in 1/hPa) for the dependence of the canopy resistance on water vapor pressure deficit. 
 || [../initialization_parameters#canyon_width_x canyon_width_x] || ini || R || 9999999.9 || Street canyon width in x-direction in m. 
 || [../initialization_parameters#canyon_width_y canyon_width_y] || ini || R || 9999999.9 || Street canyon width in y-direction in m. 
@@ -246 +246 @@
 || [../initialization_parameters#end_time_1d end_time_1d] || ini || R || 864000.0 || Time to be simulated for the 1D-model (in s). 
 || [../initialization_parameters#ensemble_member_nr ensemble_member_nr] || ini || I ||0|| Number of statistically independent members of a simulation. 
-|| [../land_surface_parameters#f_shortwave f_shortwave_incoming] [=#f] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Fraction of the net shortwave radiation that is transmitted directly to the top soil layer. 
+|| [../land_surface_parameters#f_shortwave_incoming f_shortwave_incoming] [=#f] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Fraction of the net shortwave radiation that is transmitted directly to the top soil layer. 
 || [../salsa_parameters#feedback_to_palm feedback_to_palm] || salsa || L || .F. || Parameter to switch on the dynamic feedback to the flow due to condensation of water vapour on aerosol particles. 
 || [../land_surface_parameters#field_capacity field_capacity] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Soil moisture at field capacity (in m³/m³). 
 || [../initialization_parameters#fft_method fft_method] || ini || C*20 || 'system specific' || FFT-method to be used. 
-|| [../flpar#flight_angle flight_angle] || vfm || R(100) || 100*45.0 || Horizontal flight angle (in degrees) describing the flight direction.  
-|| [../flpar#flight_begin flight_begin] || vfm || R || 0.0 || Start time of virtual flight measurement. 
-|| [../flpar#flight_end flight_end] || vfm || R ||  9999999.9 || End time of virtual flight measurement.  
-|| [../flpar#flight_level flight_level] || vfm || R(100) || 100*100.0 || Flight level in meter.
+|| [../virtual_flight_parameters#flight_angle flight_angle] || vfm || R(100) || 100*45.0 || Horizontal flight angle (in degrees) describing the flight direction.  
+|| [../virtual_flight_parameters#flight_begin flight_begin] || vfm || R || 0.0 || Start time of virtual flight measurement. 
+|| [../virtual_flight_parameters#flight_end flight_end] || vfm || R ||  9999999.9 || End time of virtual flight measurement.  
+|| [../virtual_flight_parameters#flight_level flight_level] || vfm || R(100) || 100*100.0 || Flight level in meter.
 || [../initialization_parameters#flux_input_mode flux_input_mode] || ini || C*40 || 'approximation-specific' || Parameter to choose the flux unit for input data. 
 || [../initialization_parameters#flux_output_mode flux_output_mode] || ini || C*40 || 'approximation-specific' || Parameter to choose the flux unit for outputdata. 
@@ -263 +263 @@
 || [../wind_turbine_parameters#generator_inertia generator_inertia] || wtm || R ||534.116|| Inertia of the generator (in kg/m^2^).
 || [../wind_turbine_parameters#generator_power_rated generator_power_rated] || wtm || R || 5296610.0 || Rated power of the wind turbine (in W). 
-|| [../wind_turbine_parameters#generator_speed_rated generator_speed_rated] || wtm || R ||1.216.805|| Rated generator speed (in rad/s). 
+|| [../wind_turbine_parameters#generator_speed_rated generator_speed_rated] || wtm || R ||121.6805|| Rated generator speed (in rad/s). 
 || [../wind_turbine_parameters#generator_torque_max generator_torque_max] || wtm || R || 47402.91 || Maximum Torque of the generator (in Nm). 
 || [../wind_turbine_parameters#generator_torque_rate_max generator_torque_rate_max] || wtm || R || 15000.0 || Maximum generator torque rate (in Nm/s). 
-|| [../salsa_parameters#H2SO4_init H2SO4_init] [=#h] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous sulphuric acid H2SO4 (g). 
-|| [../salsa_parameters#HNO3_init HNO3_init] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous nitric acid HNO3 (g). 
+|| [../salsa_parameters#h2so4_init h2so4_init] [=#h] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous sulphuric acid H2SO4 (g). 
+|| [../salsa_parameters#hno3_init hno3_init] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous nitric acid HNO3 (g). 
 || [../wind_turbine_parameters#hub_x hub_x] || wtm || R(100) || none || Longitudinal position of the rotor center (in m). 
 || [../wind_turbine_parameters#hub_y hub_y] || wtm || R(100) || none || Lateral position of the rotor center (in m). 
 || [../wind_turbine_parameters#hub_z hub_z] || wtm || R(100) || none || Vertical position of the rotor center (in m). This represents the hub height of the turbine. 
 || [../initialization_parameters#humidity humidity]  || ini || L || .F. || Parameter to switch on the prognostic equation for water vapor mixing ratio q. 
-|| [../land_surface_parameters#hydraulic_conductivity hydraulic_conductivity] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Hydraulic conductivity of the soil at saturation (in m/s). 
+|| [../land_surface_parameters#hydraulic_conductivity hydraulic_conductivity] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Hydraulic conductivity of the soil at saturation (in m/s). 
 || [../chemistry_parameters#icntrl icntrl] [=#i] || chem || I(20) || 0 ||  Selection and steering of the chemistry solver.
 || [../initialization_parameters#inflow_damping_height inflow_damping_height] || ini || R || from precursor run || Height below which the turbulence signal is used for turbulence recycling (in m). 
@@ -286 +286 @@
 || [../initialization_parameters#km_damp_max km_damp_max] || ini || R || 0.5*(dx or dy) || Maximum diffusivity used for filtering the velocity field in the vicinity of the outflow (in m^2^/s). 
 || [../land_surface_parameters#l_vangenuchten l_vangenuchten] [=#l] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Value of the coefficient l for the calculation of the hydraulic conductivity of soil in the parametrization after Van Genuchten. 
-|| [../initialization_parameters#lad_surface lad_surface] || pcm || R || 0.0 || Surface value of the leaf area density (in m^2^/m^3^). 
-|| [../initialization_parameters#lad_vertical_gradient lad_vertical_gradient] || pcm || R(10) || 10*0.0 || Gradient(s) of the leaf area density (in m^2^/m^4^). 
-|| [../initialization_parameters#lad_vertical_gradient_level lad_vertical_gradient] \\ [../initialization_parameters#lad_vertical_gradient_level _level] || pcm || R(10) || 10*0.0 || Height level above which the gradient of the leaf area density defined by [../initialization_parameters#lad_vertical_gradient lad_vertical_gradient] is effective (in m). 
+|| [../plant_canopy_parameters#lad_surface lad_surface] || pcm || R || 0.0 || Surface value of the leaf area density (in m^2^/m^3^). 
+|| [../plant_canopy_parameters#lad_vertical_gradient lad_vertical_gradient] || pcm || R(10) || 10*0.0 || Gradient(s) of the leaf area density (in m^2^/m^4^). 
+|| [../plant_canopy_parameters#lad_vertical_gradient_level lad_vertical_gradient] \\ [../plant_canopy_parameters#lad_vertical_gradient_level _level] || pcm || R(10) || 10*0.0 || Height level above which the gradient of the leaf area density defined by [../plant_canopy_parameters#lad_vertical_gradient lad_vertical_gradient] is effective (in m). 
 || [../plant_canopy_parameters#lai_beta lai_beta] || pcm || R || 0.0 || Leaf area index needed for construction of leaf area density profile. 
-||[../land_surface_parameters#lambda_surface_stable lambda_surface_stable ] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Heat conductivity (between atmosphere and soil) (in W/m²/K) in case of stable stratification. 
-||[../land_surface_parameters#lambda_surface_unstable lambda_surface_unstable ] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Heat conductivity (between atmosphere and soil) (in W/m²/K) in case of unstable stratification. 
+||[../land_surface_parameters#lambda_surface_stable lambda_surface_stable ] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Heat conductivity (between atmosphere and soil) (in W/m²/K) in case of stable stratification. 
+||[../land_surface_parameters#lambda_surface_unstable lambda_surface_unstable ] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Heat conductivity (between atmosphere and soil) (in W/m²/K) in case of unstable stratification. 
 || [../initialization_parameters#large_scale_forcing large_scale_forcing] || ini || L || .F. || Parameter to switch on the use of large-scale forcing information from an external file.
 || [../initialization_parameters#large_scale_subsidence large_scale_subsidence] || ini || L || .F. || Parameter to switch on the use of large scale subsidence/ascent.
 || [../initialization_parameters#latitude latitude] || ini || R || 55.0 || Geographical latitude (in degrees). 
-|| [../land_surface_parameters#leaf_area_index leaf_area_index] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Leaf area index of the canopy (in m²/m²). 
+|| [../land_surface_parameters#leaf_area_index leaf_area_index] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Leaf area index of the canopy (in m²/m²). 
 || [../plant_canopy_parameters#leaf_scalar_exch_coeff leaf_scalar_exch_coeff] || pcm || R || 0.0 || Scalar exchange coefficient for a leaf (dimensionless). 
 || [../plant_canopy_parameters#leaf_surface_conc leaf_surface_conc] || pcm || R || 0.0 || Concentration of a passive scalar at the surface of a leaf \\ (in kg m^-3^ or ppm). 
-|| [../flpar#leg_mode leg_mode] || vfm || C(100) || 100*'cyclic'  || Flight mode, either 'cyclic' or 'return'. 
+|| [../virtual_flight_parameters#leg_mode leg_mode] || vfm || C(100) || 100*'cyclic'  || Flight mode, either 'cyclic' or 'return'. 
 || [../bulk_cloud_parameters#limiter_sedimentation limiter_sedimentation] || bcm || L || .T. || Use limiter in raindrop sedimentation process. 
 || [../salsa_parameters#listspec listspec] || salsa || C*3(7)  || 'SO4', 6 * ' '  || List of activated aerosol chemical components. 
@@ -314 +314 @@
 || [../runtime_parameters#mask_y mask_y] || run || R \\ (max_masks, \\ 100) || max_masks*100*-1.0 || All y-coordinates of mask positions (in multiples of [../runtime_parameters#mask_scale_y mask_scale_y]). 
 || [../runtime_parameters#mask_z mask_z] || run || R \\ (max_masks, \\ 100) || max_masks*100*-1.0 || All z-coordinates of mask positions (in multiples of [../runtime_parameters#mask_scale_z mask_scale_z]). 
-|| [../runtime_parameters#mask_x_loop mask_x_loop] || run || R \\ (max_masks, \\ 3) || max_masks*100* \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for x-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_x mask_scale_x]). 
-|| [../runtime_parameters#mask_y_loop mask_y_loop] || run || R \\ (max_masks, \\ 3) || max_masks*100* \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for y-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_y mask_scale_y]). 
-|| [../runtime_parameters#mask_z_loop mask_z_loop] || run || R \\ (max_masks, \\ 3) || max_masks*100* \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for z-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_z mask_scale_z]). 
+|| [../runtime_parameters#mask_x_loop mask_x_loop] || run || R \\ (max_masks, \\ 3) || max_masks * \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for x-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_x mask_scale_x]). 
+|| [../runtime_parameters#mask_y_loop mask_y_loop] || run || R \\ (max_masks, \\ 3) || max_masks * \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for y-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_y mask_scale_y]). 
+|| [../runtime_parameters#mask_z_loop mask_z_loop] || run || R \\ (max_masks, \\ 3) || max_masks * \\ (/-1.0,-1.0,-1.0/) || Loop begin, end and stride for z-coordinates of mask locations for masks (in multiples of [../runtime_parameters#mask_scale_z mask_scale_z]). 
 || [../salsa_parameters#mass_fracs_a mass_fracs_a] || salsa || R(7) || 1.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0  || Mass fractions of soluble chemical components (subrange 2a). 
 || [../salsa_parameters#mass_fracs_b mass_fracs_b] || salsa || R(7) || 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0   || Mass fractions of insoluble chemical components (subrange 2b). 
 || [../agent_parameters#max_dist_from_path max_dist_from_path] || agt || R ||1.0|| Agent distance from current path section that triggers recalculation of that agent's path (in m).
-|| [../flpar#max_elev_change max_elev_change] || vfm || R(100) ||100*0.0|| Maximum possible elevation change in case rate_of_climb is not equal to zero.
+|| [../virtual_flight_parameters#max_elev_change max_elev_change] || vfm || R(100) ||100*0.0|| Maximum possible elevation change in case rate_of_climb is not equal to zero.
 || [../chemistry_parameters#max_street_id max_street_id] || chem || I(99) || 0 ||  Maximum index value for identifying ALL (MAIN and SIDE) streets following street type classes from {{{OpenStreetMap}}}. 
-|| [../initialization_parameters#mg_cycles mg_cycles] || ini || I ||-1|| Number of cycles to be used with the multigrid scheme. 
-|| [../initialization_parameters#mg_switch_to_pe0_level mg_switch_to] \\ [../initialization_parameters#mg_switch_to_pe0_level _pe0_level] || ini || I || see parameter \\ description || Grid level at which data shall be gathered on PE0. 
-|| [../land_surface_parameters#min_canopy_resistance min_canopy_resistance] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Minimum canopy (i.e., stomatal) resistance (in s/m). 
+|| [../initialization_parameters#mg_cycles mg_cycles] || ini || I || 4 || Number of cycles to be used with the multigrid scheme. 
+|| [../initialization_parameters#mg_switch_to_pe0_level mg_switch_to] \\ [../initialization_parameters#mg_switch_to_pe0_level _pe0_level] || ini || I || -1 || Grid level at which data shall be gathered on PE0. 
+|| [../land_surface_parameters#min_canopy_resistance min_canopy_resistance] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Minimum canopy (i.e., stomatal) resistance (in s/m). 
 || [../agent_parameters#min_nr_agent min_nr_agent] || agt || I ||2|| Minimum number of agents for which memory is allocated at every grid cell.
 || [../particle_parameters#min_nr_particles min_nr_particles] || lpm || I ||50|| Minimum number of particles for which memory is allocated at every grid cell. 
@@ -335 +335 @@
 || [../chemistry_parameters#my_steps my_steps] || chem || I(50) || 0 ||  List of fixed timesteps.
 || [../wind_turbine_parameters#n_airfoils n_airfoils] || wtm || I ||8|| Number of airfoils of the used turbine model. 
-|| [../salsa_parameters#n_lognorm n_lognorm] [=#n] || salsa || R(7) || 1.04E5, 3.23E4, 5.4, 0.0, 0.0, 0.0, 0.0 || The total aerosol number concentration per aerosol mode (in cm^-3^). 
+|| [../salsa_parameters#n_lognorm n_lognorm] [=#n] || salsa || R(7) || 1.04E11, 3.23E10, 5.4E6, 0.0, 0.0, 0.0, 0.0 || The total aerosol number concentration per aerosol mode (in m^-3^). 
 || [../wind_turbine_parameters#n_turbines n_turbines] || wtm || I ||1|| Number of the turbines to be included. Maximum is 100.
 || [../land_surface_parameters#n_vangenuchten n_vangenuchten] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Value of the coefficient n for the calculation of the hydraulic conductivity of soil in the parametrization after Van Genuchten. 
 || [../particle_parameters#na na] || lpm || R(3) || 100.0 || Parameters of initial aerosol spectrum. 
 || [../bulk_cloud_parameters#na_init na_init] || bulkc || R || 100.0E6 || Background dry aerosol concentration. 
-|| [../wind_turbine_parameters#nacelle_cd nacelle_cd] || wtm || R(100) || none || Drag coefficient for each nacelle. This parameter needs to be specified for each turbine.
-|| [../wind_turbine_parameters#nacelle_radius nacelle_radius] || wtm || R(100) || none || Radius of the nacelle for each turbine (in m). This parameter has to be non-zero if the nacelle should be included. 
+|| [../wind_turbine_parameters#nacelle_cd nacelle_cd] || wtm || R(100) || 0.85 || Drag coefficient for each nacelle. This parameter needs to be specified for each turbine.
+|| [../wind_turbine_parameters#nacelle_radius nacelle_radius] || wtm || R(100) || 0.0 || Radius of the nacelle for each turbine (in m). This parameter has to be non-zero if the nacelle should be included. 
 || [../salsa_parameters#nbin nbin] || salsa || I(2) || 3, 7 || Number of aerosol size bins per subrange. 
 || [../bulk_cloud_parameters#nc_const nc_const] || bulkc || R || 70.0E6 || Fixed cloud droplet number density (in 1/m3). 
@@ -349 +349 @@
 || [../runtime_parameters#netcdf_data_format netcdf_data_format] || run || I ||2|| Data format for netCDF files. 
 || [../runtime_parameters#netcdf_deflate netcdf_deflate] || run || I ||0|| Data compression level for NetCDF4/HDF5 format. 
-|| [../runtime_parameters#netcdf_precision netcdf_precision] || ini || C*20(10) || single precision for \\ all output quantities || Defines the accuracy of the netCDF output. 
+|| [../initialization_parameters#netcdf_precision netcdf_precision] || ini || C*20(10) || single precision for \\ all output quantities || Defines the accuracy of the netCDF output. 
 || [../initialization_parameters#neutral neutral] || ini || L || .F. || Parameter to switch off calculation of temperature equation. 
 || [../salsa_parameters#nf2a nf2a] || salsa || R || 1.0 || The number fraction allocated to subrange 2a.
 || [../initialization_parameters#ngsrb ngsrb] || ini || I ||2|| Number of Gauss-Seidel iterations to be carried out on each grid level of the multigrid Poisson solver. 
-|| [../salsa_parameters#NH3_init NH3_init] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous ammonia NH3 (g). 
+|| [../salsa_parameters#nh3_init nh3_init] || salsa || R || 1.0 || Initial number concentration (in m^-3^) of gaseous ammonia NH3 (g). 
 || [../salsa_parameters#nj3 nj3] || salsa || I || 1 || Parametrisation for calculating the apparent formation rate of 3 nm sized aerosol particles (J,,3,,, in # s^-1^). 
 || [../salsa_parameters#nlcnd nlcnd] || salsa || L || .F. || Parameter to switch on the condensation of gaseous compounds on aerosol particles. 
-|| [../salsa_parameters# nlcndgas  nlcndgas] || salsa || L || .F. || Parameter to switch on the condensation of gaseous compounds, excluding water vapour, on aerosol particles. 
+|| [../salsa_parameters#nlcndgas  nlcndgas] || salsa || L || .F. || Parameter to switch on the condensation of gaseous compounds, excluding water vapour, on aerosol particles. 
 || [../salsa_parameters#nlcndgash2oae nlcndgash2oae] || salsa || L || .F. || Parameter to switch on the condensation of water vapour on aerosol particles. 
 || [../salsa_parameters#nlcoag nlcoag] || salsa || L || .F. || Parameter to switch on the coagulation of aerosol particles. 
@@ -372 +372 @@
 || [../particle_parameters#number_concentration number_concentration] || lpm || R || -1.0 || Initial particle number concentration. 
 || [../agent_parameters#number_of_agent_groups number_of_agent_groups] || agt || I ||1|| Number of agent groups.
-|| [../particle_parameters#number_of_particle_groups number_of] \\ [../particle_parameters#number_of_particle_groups _particle_groups] || lpm || I ||-1|| Number of particle groups to be used. 
-|| [../particle_parameters#number_particles_per_gridbox number_particles] \\ [../particle_parameters#number_particles_per_gridbox _per_gridbox] || lpm || I ||1|| Number of created particles per gridbox. 
+|| [../particle_parameters#number_of_particle_groups number_of] \\ [../particle_parameters#number_of_particle_groups _particle_groups] || lpm || I ||1|| Number of particle groups to be used. 
+|| [../particle_parameters#number_particles_per_gridbox number_particles] \\ [../particle_parameters#number_particles_per_gridbox _per_gridbox] || lpm || I || -1 || Number of created particles per gridbox. 
 || [../initialization_parameters#nx nx] || ini || I || no default value || Number of grid points in x-direction. 
 || [../initialization_parameters#ny ny] || ini || I || no default value || Number of grid points in y-direction. 
@@ -432 +432 @@
 || [../particle_parameters#random_start_position random_start_position] || lpm || L || .F. || Initial position of the particles is varied randomly within certain limits. 
 || [../agent_parameters#random_start_position_agents random_start_position] \\ [../agent_parameters#random_start_position_agents _agents] || agt || L ||.T.|| Initial position of the particles is varied randomly within certain limits. 
-|| [../flpar#rate_of_climb rate_of_climb] || vfm || R(100) ||100*0.0|| Vertical speed of the aircraft in meter per second. 
+|| [../virtual_flight_parameters#rate_of_climb rate_of_climb] || vfm || R(100) ||100*0.0|| Vertical speed of the aircraft in meter per second. 
 || [../initialization_parameters#rayleigh_damping_factor rayleigh_damping] \\ [../initialization_parameters#rayleigh_damping_factor _factor] || ini || R || 0.0 and/or 0.01 || Factor for Rayleigh damping. 
 || [../initialization_parameters#rayleigh_damping_height rayleigh_damping] \\ [../initialization_parameters#rayleigh_damping_height _height] || ini || R || 2/3*zu(nz) || Height where the Rayleigh damping starts (in m). 
@@ -454 +454 @@
 || [../runtime_parameters#restart_time restart_time] || run || R || 9999999.9 || Simulated time after which a restart run is to be carried out (in s). 
 || [../particle_parameters#rm rm]|| lpm || R(3) || 0.05E-6 || Parameters of initial aerosol spectrum.
-|| [../land_surface_parameters#root_fraction root_fraction] || lsm || R(4) || depends on [../land_surface_parameters#veg_type veg_type] || Root distribution over the four soil layers. 
+|| [../land_surface_parameters#root_fraction root_fraction] || lsm || R(4) || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Root distribution over the four soil layers. 
 || [../initialization_parameters#roughness_length roughness_length] || ini || R || 0.1 || Roughness length (in m). 
 || [../wind_turbine_parameters#rotor_inertia rotor_inertia] || wtm || R || 34784179.0 || Inertia of the rotor (in kg/m^2). 
@@ -499 +499 @@
 || [../land_surface_parameters#soil_type soil_type] || lsm || I ||3|| Soil type to be used in the soil model. 
 || [../spectra_parameters#spectra_direction spectra_direction] || spec || C*2(10) || 10*' ' || Direction(s) along which spectra are to be calculated. 
-|| [../flpar#speed_agl speed_agl] || vfm || R(100) ||100*25.0|| Horizontal speed of the aircraft above ground level in meter per second. 
+|| [../virtual_flight_parameters#speed_agl speed_agl] || vfm || R(100) ||100*25.0|| Horizontal speed of the aircraft above ground level in meter per second. 
 || [../wind_turbine_parameters#speed_control speed_control] || wtm || L || .F. || Parameter to switch on the speed control. 
 || [../initialization_parameters#spinup_pt_amplitude spinup_pt_amplitude] || ini || R || 0.0 || Representative amplitude of the diurnal near-surface temperature variation during the spinup phase. 
@@ -566 +566 @@
 || [../salsa_parameters#van_der_waals_coagc van_der_waals_coagc] || salsa || L ||.F.|| Parameter to switch on the van der Waals forces when calculating the collision kernel in the coagulation subroutine.
 || [../initialization_parameters#vdi_checks vdi_checks] || ini || L || .F. || Switch the internal controls according to VDI 3783 Part 9 on. 
-|| [../land_surface_parameters#veg_type veg_type] || lsm || I ||2|| Vegetation type to be used in the land surface model. 
-|| [../land_surface_parameters#vegetation_coverage vegetation_coverage] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Vegetation coverage of the surface. 
+|| [../land_surface_parameters#vegetation_type vegetation_type] || lsm || I ||2|| Vegetation type to be used in the land surface model. 
+|| [../land_surface_parameters#vegetation_coverage vegetation_coverage] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Vegetation coverage of the surface. 
 || [../bulk_cloud_parameters#ventilation_effect ventilation_effect] || bulkc || L || .T. || Parameterize ventilation effect on evaporation of raindrops. 
 || [../particle_parameters#vertical_particle_advection vertical_particle] \\ [../particle_parameters#vertical_particle_advection _advection] || lpm || L || .T. || Switch on/off vertical particle transport.
@@ -581 +581 @@
 || [../land_surface_parameters#wilting_point wilting_point] || lsm || R || depends on [../land_surface_parameters#soil_type soil_type] || Soil moisture at permanent wilting point (in m³/m³). 
 || [../particle_parameters#write_particle_statistics write_particle] \\ [../particle_parameters#write_particle_statistics _statistics] || lpm || L || .F. || Switch on/off output of particle information. 
-|| [../flpar#x_end x_end] [=#x] || vfm || R(100) || 100*999999999.0 || End-position of the flight leg along x in meter. 
-|| [../flpar#x_start x_start] || vfm || R(100) || 100*999999999.0 || Start-position of the flight leg along x in meter. 
-|| [../flpar#y_end y_end] [=#y] || vfm || R(100) || 100*999999999.0 || End-position of the flight leg along y in meter. 
-|| [../flpar#y_start y_start] || vfm || R(100) || 100*999999999.0 || Start-position of the flight leg along y in meter. 
+|| [../virtual_flight_parameters#x_end x_end] [=#x] || vfm || R(100) || 100*999999999.0 || End-position of the flight leg along x in meter. 
+|| [../virtual_flight_parameters#x_start x_start] || vfm || R(100) || 100*999999999.0 || Start-position of the flight leg along x in meter. 
+|| [../virtual_flight_parameters#y_end y_end] [=#y] || vfm || R(100) || 100*999999999.0 || End-position of the flight leg along y in meter. 
+|| [../virtual_flight_parameters#y_start y_start] || vfm || R(100) || 100*999999999.0 || Start-position of the flight leg along y in meter. 
 || [../wind_turbine_parameters#yaw_angle yaw_angle] || wtm || R(100) || none || Yaw angle for each turbine in degrees. A positive yaw means a rotation of the rotor in clockwise direction within the xy-plane. 
 || [../wind_turbine_parameters#yaw_control yaw_control] || wtm || L || .F. || Parameter to switch on the yaw controller. 
@@ -591 +591 @@
 || [../wind_turbine_parameters#yaw_speed yaw_speed] || wtm || R || 0.005236 || Speed of the yaw actuator (in rad/s). 
 || [../initialization_parameters#y_shift y_shift] || ini || I ||0|| Distance of y-shift for cyclic and non-cyclic boundary conditions (in number of PEs). 
-|| [../land_surface_parameters#z0_eb z0_eb] [=#z] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Roughness length for momentum (in m). 
-|| [../land_surface_parameters#z0h_eb z0h_eb] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Roughness length for heat (in m). 
-|| [../land_surface_parameters#z0q_eb z0q_eb] || lsm || R || depends on [../land_surface_parameters#veg_type veg_type] || Roughness length for moisture (in m). 
+|| [../land_surface_parameters#z0_eb z0_eb] [=#z] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for momentum (in m). 
+|| [../land_surface_parameters#z0h_eb z0h_eb] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for heat (in m). 
+|| [../land_surface_parameters#z0q_eb z0q_eb] || lsm || R || depends on [../land_surface_parameters#vegetation_type vegetation_type] || Roughness length for moisture (in m). 
 || [../initialization_parameters#z0h_factor z0h_factor] || ini || R || 1.0 || Factor for calculating the roughness length for scalars. 
 || [../initialization_parameters#zeta_max zeta_max] || ini || R || 20.0 || Upper limit of the stability parameter {{{zeta = z_mo/L}}}.