Changes between Version 10 and Version 11 of doc/app/iofiles/pids/dynamic

Timestamp:

Feb 12, 2020 1:22:44 PM (5 years ago)

Author:

scharf

Comment:

--

doc/app/iofiles/pids/dynamic

@@ -4 +4 @@
 
 The dynamic input file (see [../#PIDS_DYNAMIC PIDS_DYNAMIC]) comprises all data which might change depending on the day of year, such as initialization data, large-scale forcing tendencies or boundary data.  
-Utilizing the pre-processing tool [wiki:doc/app/iofiles/inifor INIFOR], the respective data can be derived directly from the larger-scale [[http://www.cosmo-model.org/content/default.htm|COSMO model]] (except for active or passive chemical components which are not considered in the COSMO model). This way, the dynamic input file acts as a interface between a larger-scale model and PALM, being a so-called [wiki:doc/app/inipar/#nesting_offline offline nesting]. 
+Utilizing the pre-processing tool [wiki:doc/app/iofiles/inifor INIFOR], the respective data can be derived directly from the larger-scale [[http://www.cosmo-model.org/content/default.htm|COSMO model]] (except for active or passive chemical components which are not considered in the COSMO model). This way, the dynamic input file acts as a interface between a larger-scale model and PALM, being a so-called [wiki:doc/app/initialization_parameters/#nesting_offline offline nesting]. 
 In case of a [wiki:doc/app/nestpar nested] model run (online), only the parent domain considers the dynamic input_file for inititialization and offline-nesting, while embedded child models itself will be initialized and forced via its parent domains.    
-In order to activate input from the dynamic input file, setting of [wiki:doc/app/inipar#initializing_actions initializing_actions] = 'inifor' is required. 
+In order to activate input from the dynamic input file, setting of [wiki:doc/app/initialization_parameters#initializing_actions initializing_actions] = 'inifor' is required. 
 For more information of how to create a dynamic input file, please see the [wiki:doc/app/iofiles/inifor INIFOR documentation]. 
 For more detailed documentation of the input variables, please see the [wiki:doc/app/iofiles/pids PALM input data standard].
@@ -43 +43 @@
 {{{lod=2}}}: Initial volume data of mixing_ratio. 
 
-Input of this quantity becomes only effective if [wiki:doc/app/inipar#humidity humidity] = ''.T.''.
+Input of this quantity becomes only effective if [wiki:doc/app/initialization_parameters#humidity humidity] = ''.T.''.
 }}}
 |----------------
@@ -109 +109 @@
 {{{lod=2}}}: Initial volume data of any passive scalar. 
 
-Input of this quantity becomes only effective if [wiki:doc/app/inipar#passive_scalar passive_scalar] = ''.T.''. Please note, this quantity is currently not provided by [#inifor inifor]. 
+Input of this quantity becomes only effective if [wiki:doc/app/initialization_parameters#passive_scalar passive_scalar] = ''.T.''. Please note, this quantity is currently not provided by [#inifor inifor]. 
 }}}
 |----------------
@@ -390 +390 @@
 {{{#!td
 Nudging data for potential temperature. 
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#nudging nudging] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. to become effective.  
 }}}
 |----------------
@@ -405 +405 @@
 {{{#!td
 Nudging data for the mixing ratio. 
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#nudging nudging] = .T. and [wiki:doc/app/inipar#humidity humidity] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. and [wiki:doc/app/initialization_parameters#humidity humidity] = .T. to become effective.  
 }}}
 |----------------
@@ -465 +465 @@
 {{{#!td
 Nudging data for a passive scalar. 
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#nudging nudging] = .T. and [wiki:doc/app/inipar#passive_scalar passive_scalar] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. and [wiki:doc/app/initialization_parameters#passive_scalar passive_scalar] = .T. to become effective.  
 }}}
 |----------------
@@ -480 +480 @@
 {{{#!td
 Nudging relaxation time scale.  
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#nudging nudging] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#nudging nudging] = .T. to become effective.  
 }}}
 |----------------
@@ -523 +523 @@
 {{{#!td
 Large­-scale forcing data for the subsidence velocity.    
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#large_scale_forcing large_scale_forcing] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -538 +538 @@
 {{{#!td
 Large­-scale forcing data for the advection tendency of potential temperature.     
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#large_scale_forcing large_scale_forcing] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -553 +553 @@
 {{{#!td
 Large­-scale forcing data for the advection tendency of mixing ratio.     
-Requires cyclic boundary conditions as well as [wiki:doc/app/inipar#large_scale_forcing large_scale_forcing] = .T. to become effective.  
+Requires cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#large_scale_forcing large_scale_forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -568 +568 @@
 {{{#!td
 Boundary condition at left (west) model boundary for the potential temperature.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -583 +583 @@
 {{{#!td
 Boundary condition at left (west) model boundary for the mixing ratio.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -598 +598 @@
 {{{#!td
 Boundary condition at left (west) model boundary for the wind component in x-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -613 +613 @@
 {{{#!td
 Boundary condition at left (west) model boundary for the wind component in y-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -628 +628 @@
 {{{#!td
 Boundary condition at left (west) model boundary for the wind component in z-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -643 +643 @@
 {{{#!td
 Boundary condition at right model boundary for the potential temperature.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -658 +658 @@
 {{{#!td
 Boundary condition at right (east) model boundary for the mixing ratio.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -673 +673 @@
 {{{#!td
 Boundary condition at right (east) model boundary for the wind component in x-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -688 +688 @@
 {{{#!td
 Boundary condition at right (east) model boundary for the wind component in y-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -703 +703 @@
 {{{#!td
 Boundary condition at right (east) model boundary for the wind component in z-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -718 +718 @@
 {{{#!td
 Boundary condition at front (south) model boundary for the potential temperature.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -733 +733 @@
 {{{#!td
 Boundary condition at front (south) model boundary for the mixing ratio.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -748 +748 @@
 {{{#!td
 Boundary condition at front (south) model boundary for the wind component in x-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -763 +763 @@
 {{{#!td
 Boundary condition at front (south) model boundary for the wind component in y-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -778 +778 @@
 {{{#!td
 Boundary condition at front (south) model boundary for the wind component in z-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -793 +793 @@
 {{{#!td
 Boundary condition at back (north) model boundary for the potential temperature.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -808 +808 @@
 {{{#!td
 Boundary condition at back (north) model boundary for the mixing ratio.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -823 +823 @@
 {{{#!td
 Boundary condition at back (north) model boundary for the wind component in x-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -838 +838 @@
 {{{#!td
 Boundary condition at back (north) model boundary for the wind component in y-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -853 +853 @@
 {{{#!td
 Boundary condition at back (north) model boundary for the wind component in z-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -868 +868 @@
 {{{#!td
 Boundary condition at top model boundary for the potential temperature.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -883 +883 @@
 {{{#!td
 Boundary condition at top model boundary for the mixing ratio.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -898 +898 @@
 {{{#!td
 Boundary condition at top model boundary for the wind component in x-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -913 +913 @@
 {{{#!td
 Boundary condition at top model boundary for the wind component in y-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}
 |----------------
@@ -928 +928 @@
 {{{#!td
 Boundary condition at top model boundary for the wind component in z-direction.  
-Requires non-cyclic boundary conditions as well as [wiki:doc/app/inipar#forcing forcing] = .T. to become effective.  
+Requires non-cyclic boundary conditions as well as [wiki:doc/app/initialization_parameters#forcing forcing] = .T. to become effective.  
 }}}