- Timestamp:
- Jan 14, 2021 10:42:28 AM (4 years ago)
- Location:
- palm/trunk
- Files:
-
- 19 edited
-
SOURCE/bulk_cloud_model_mod.f90 (modified) (2 diffs)
-
SOURCE/dynamics_mod.f90 (modified) (2 diffs)
-
SOURCE/gust_mod.f90 (modified) (2 diffs)
-
SOURCE/indoor_model_mod.f90 (modified) (4 diffs)
-
SOURCE/lagrangian_particle_model_mod.f90 (modified) (3 diffs)
-
SOURCE/land_surface_model_mod.f90 (modified) (3 diffs)
-
SOURCE/multi_agent_system_mod.f90 (modified) (3 diffs)
-
SOURCE/nesting_offl_mod.f90 (modified) (3 diffs)
-
SOURCE/ocean_mod.f90 (modified) (2 diffs)
-
SOURCE/parin.f90 (modified) (5 diffs)
-
SOURCE/plant_canopy_model_mod.f90 (modified) (2 diffs)
-
SOURCE/radiation_model_mod.f90 (modified) (4 diffs)
-
SOURCE/salsa_mod.f90 (modified) (113 diffs)
-
SOURCE/spectra_mod.f90 (modified) (3 diffs)
-
SOURCE/surface_data_output_mod.f90 (modified) (2 diffs)
-
SOURCE/synthetic_turbulence_generator_mod.f90 (modified) (14 diffs)
-
SOURCE/urban_surface_mod.f90 (modified) (18 diffs)
-
SOURCE/virtual_flight_mod.f90 (modified) (4 diffs)
-
TESTS/cases/topo_from_ASCII_file/INPUT/topo_from_ASCII_file_p3d (modified) (2 diffs)
Legend:
- Unmodified
- Added
- Removed
-
palm/trunk/SOURCE/bulk_cloud_model_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4828 2021-01-05 11:21:41Z Giersch 26 30 ! Enable 3D data output also with 64-bit precision 27 31 ! … … 664 668 !> Parin for &bulk_cloud_parameters for the bulk cloud module 665 669 !--------------------------------------------------------------------------------------------------! 666 SUBROUTINE bcm_parin 667 668 669 IMPLICIT NONE 670 671 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter 672 !< file 673 674 NAMELIST /bulk_cloud_parameters/ & 675 aerosol_bulk, & 676 bulk_cloud_model, & 677 c_sedimentation, & 678 call_microphysics_at_all_substeps, & 679 cloud_scheme, & 680 cloud_water_sedimentation, & 681 collision_turbulence, & 682 curvature_solution_effects_bulk, & 683 dry_aerosol_radius, & 684 graupel, & 685 ice_crystal_sedimentation, & 686 in_init, & 687 limiter_sedimentation, & 688 microphysics_ice_phase, & 689 na_init, & 690 nc_const, & 691 sigma_bulk, & 692 snow, & 693 start_ice_microphysics, & 694 ventilation_effect 695 696 line = ' ' 697 ! 698 !-- Try to find bulk cloud module namelist 699 REWIND ( 11 ) 700 line = ' ' 701 DO WHILE ( INDEX( line, '&bulk_cloud_parameters' ) == 0 ) 702 READ ( 11, '(A)', END=10 ) line 703 ENDDO 704 BACKSPACE ( 11 ) 705 ! 706 !-- Read user-defined namelist 707 READ ( 11, bulk_cloud_parameters ) 708 ! 709 !-- Set flag that indicates that the bulk cloud module is switched on 710 !bulk_cloud_model = .TRUE. 711 712 10 CONTINUE 713 714 715 END SUBROUTINE bcm_parin 670 SUBROUTINE bcm_parin 671 672 673 IMPLICIT NONE 674 675 CHARACTER(LEN=100) :: line !< Dummy string that contains the current line of the parameter 676 !< file 677 678 INTEGER(iwp) :: io_status !< Status after reading the namelist file 679 680 681 NAMELIST /bulk_cloud_parameters/ & 682 aerosol_bulk, & 683 bulk_cloud_model, & 684 c_sedimentation, & 685 call_microphysics_at_all_substeps, & 686 cloud_scheme, & 687 cloud_water_sedimentation, & 688 collision_turbulence, & 689 curvature_solution_effects_bulk, & 690 dry_aerosol_radius, & 691 graupel, & 692 ice_crystal_sedimentation, & 693 in_init, & 694 limiter_sedimentation, & 695 microphysics_ice_phase, & 696 na_init, & 697 nc_const, & 698 sigma_bulk, & 699 snow, & 700 start_ice_microphysics, & 701 ventilation_effect 702 703 ! 704 !-- Move to the beginning of the namelist file and try to find and read the namelist. 705 REWIND( 11 ) 706 READ( 11, bulk_cloud_parameters, IOSTAT=io_status ) 707 ! 708 !-- Action depending on the READ status 709 IF ( io_status == 0 ) THEN 710 ! 711 !-- bulk_cloud_parameters namelist was found and read correctly. Set flag that 712 !-- bulk_cloud_model_mod is switched on. 713 bulk_cloud_model = .TRUE. 714 715 ELSEIF ( io_status > 0 ) THEN 716 ! 717 !-- bulk_cloud_parameters namelist was found, but contained errors. Print an error message 718 !-- containing the line that caused the problem. 719 BACKSPACE( 11 ) 720 READ( 11 , '(A)') line 721 CALL parin_fail_message( 'bulk_cloud_parameters', line ) 722 723 ENDIF 724 725 END SUBROUTINE bcm_parin 716 726 717 727 -
palm/trunk/SOURCE/dynamics_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4828 2021-01-05 11:21:41Z Giersch 26 30 ! Enable 3D data output also with 64-bit precision 27 31 ! … … 336 340 337 341 338 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 339 340 NAMELIST /dynamics_parameters/ & 341 dynamics_module_enabled 342 343 344 line = ' ' 345 ! 346 !-- Try to find module-specific namelist 347 REWIND ( 11 ) 348 line = ' ' 349 DO WHILE ( INDEX( line, '&dynamics_parameters' ) == 0 ) 350 READ ( 11, '(A)', END=12 ) line 351 ENDDO 352 BACKSPACE ( 11 ) 353 354 !-- Set default module switch to true 342 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter 343 !< file 344 INTEGER(iwp) :: io_status !< status after reading the namelist file 345 346 347 NAMELIST /dynamics_parameters/ dynamics_module_enabled 348 349 ! 350 !-- Set default module switch to true. 355 351 dynamics_module_enabled = .TRUE. 356 352 357 !-- Read user-defined namelist 358 READ ( 11, dynamics_parameters, ERR = 10 ) 359 360 GOTO 12 361 362 10 BACKSPACE( 11 ) 363 READ( 11 , '(A)') line 364 CALL parin_fail_message( 'dynamics_parameters', line ) 365 366 12 CONTINUE 353 !-- Move to the beginning of the namelist file and try to find and read the namelist. 354 REWIND( 11 ) 355 READ( 11, dynamics_parameters, IOSTAT=io_status ) 356 357 ! 358 !-- Action depending on the READ status 359 IF ( io_status > 0 ) THEN 360 ! 361 !-- dynamics_parameters namelist was found, but contained errors. Print an error message 362 !-- including the line that caused the problem. 363 BACKSPACE( 11 ) 364 READ( 11 , '(A)') line 365 CALL parin_fail_message( 'dynamics_parameters', line ) 366 367 ENDIF 367 368 368 369 END SUBROUTINE dynamics_parin -
palm/trunk/SOURCE/gust_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4828 2021-01-05 11:21:41Z Giersch 26 30 ! Enable 3D data output also with 64-bit precision 27 31 ! … … 213 217 !> Parin for &gust_parameters for gust module 214 218 !--------------------------------------------------------------------------------------------------! 215 SUBROUTINE gust_parin 216 217 218 IMPLICIT NONE 219 220 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 221 222 NAMELIST /gust_parameters/ & 223 gust_module_enabled 224 225 line = ' ' 226 ! 227 !-- Try to find gust module package 228 REWIND ( 11 ) 229 line = ' ' 230 DO WHILE ( INDEX( line, '&gust_parameters' ) == 0 ) 231 READ ( 11, '(A)', END=10 ) line 232 ENDDO 233 BACKSPACE ( 11 ) 234 ! 235 !-- Read user-defined namelist 236 READ ( 11, gust_parameters ) 237 ! 238 !-- Set flag that indicates that the gust module is switched on 219 SUBROUTINE gust_parin 220 221 222 IMPLICIT NONE 223 224 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter 225 !< file 226 INTEGER(iwp) :: io_status !< status after reading the namelist file 227 228 229 NAMELIST /gust_parameters/ gust_module_enabled 230 231 ! 232 !-- Move to the beginning of the namelist file and try to find and read the namelist. 233 REWIND( 11 ) 234 READ( 11, gust_parameters, IOSTAT=io_status ) 235 236 ! 237 !-- Action depending on the READ status 238 IF ( io_status == 0 ) THEN 239 ! 240 !-- gust_parameters namelist was found and read correctly. Set flag that indicates that the gust 241 !-- module is switched on. 239 242 gust_module_enabled = .TRUE. 240 243 241 10 CONTINUE 242 243 244 END SUBROUTINE gust_parin 244 ELSEIF ( io_status > 0 ) THEN 245 ! 246 !-- gust_parameters namelist was found, but contained errors. Print an error message including 247 !-- the line that caused the problem. 248 BACKSPACE( 11 ) 249 READ( 11 , '(A)') line 250 CALL parin_fail_message( 'gust_parameters', line ) 251 252 ENDIF 253 254 END SUBROUTINE gust_parin 245 255 246 256 -
palm/trunk/SOURCE/indoor_model_mod.f90
r4828 r4842 25 25 ! ----------------- 26 26 ! $Id$ 27 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 28 ! and goto statements are not required any more 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 27 31 ! Change parameters for summer_pars and winter_pars (responsible: S. Rissmann) 28 32 ! … … 1903 1907 CASE ( 'im_t_indoor_wall_win' ) 1904 1908 unit = 'K' 1905 1909 1906 1910 CASE ( 'im_t_indoor_wall' ) 1907 1911 unit = 'K' … … 2123 2127 2124 2128 2125 CHARACTER (LEN=80) :: line !< string containing current line of file PARIN 2129 CHARACTER(LEN=100) :: line !< string containing current line of file PARIN 2130 2131 INTEGER(iwp) :: io_status !< status after reading the namelist file 2132 2126 2133 2127 2134 NAMELIST /indoor_parameters/ indoor_during_spinup, & 2128 2135 initial_indoor_temperature 2129 2136 2130 2131 ! 2132 !-- Try to find indoor model package 2133 REWIND ( 11 ) 2134 line = ' ' 2135 DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 ) 2136 READ ( 11, '(A)', END=10 ) line 2137 ENDDO 2138 BACKSPACE ( 11 ) 2139 2140 ! 2141 !-- Read user-defined namelist 2142 READ ( 11, indoor_parameters ) 2143 ! 2144 !-- Set flag that indicates that the indoor model is switched on 2145 indoor_model = .TRUE. 2137 ! 2138 !-- Move to the beginning of the namelist file and try to find and read the namelist. 2139 REWIND( 11 ) 2140 READ( 11, indoor_parameters, IOSTAT=io_status ) 2141 2142 ! 2143 !-- Action depending on the READ status 2144 IF ( io_status == 0 ) THEN 2145 ! 2146 !-- indoor_parameters namelist was found and read correctly. Set flag that indicates that the 2147 !-- indoor model is switched on. 2148 indoor_model = .TRUE. 2149 2150 ELSEIF ( io_status > 0 ) THEN 2151 ! 2152 !-- indoor_parameters namelist was found, but contained errors. Print an error message including 2153 !-- the line that caused the problem. 2154 BACKSPACE( 11 ) 2155 READ( 11 , '(A)' ) line 2156 CALL parin_fail_message( 'indoor_parameters', line ) 2157 2158 ENDIF 2146 2159 2147 2160 ! … … 2156 2169 ! ENDIF 2157 2170 2158 10 CONTINUE2159 2160 2171 END SUBROUTINE im_parin 2161 2172 -
palm/trunk/SOURCE/lagrangian_particle_model_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more, 28 ! deprecated namelist removed 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 26 31 ! output of particle time series added 27 32 ! … … 569 574 SUBROUTINE lpm_parin 570 575 571 CHARACTER (LEN=80) :: line !< 572 573 NAMELIST /particles_par/ & 574 aero_species, & 575 aero_type, & 576 aero_weight, & 577 alloc_factor, & 578 bc_par_b, & 579 bc_par_lr, & 580 bc_par_ns, & 581 bc_par_t, & 582 collision_kernel, & 583 curvature_solution_effects, & 584 deallocate_memory, & 585 density_ratio, & 586 dissipation_classes, & 587 dt_dopts, & 588 dt_min_part, & 589 dt_prel, & 590 dt_write_particle_data, & 591 end_time_prel, & 592 initial_weighting_factor, & 593 log_sigma, & 594 max_number_particles_per_gridbox, & 595 merging, & 596 na, & 597 number_concentration, & 598 number_of_particle_groups, & 599 number_particles_per_gridbox, & 600 particles_per_point, & 601 particle_advection_start, & 602 particle_advection_interpolation, & 603 particle_maximum_age, & 604 pdx, & 605 pdy, & 606 pdz, & 607 psb, & 608 psl, & 609 psn, & 610 psr, & 611 pss, & 612 pst, & 613 radius, & 614 radius_classes, & 615 radius_merge, & 616 radius_split, & 617 random_start_position, & 618 read_particles_from_restartfile, & 619 rm, & 620 seed_follows_topography, & 621 splitting, & 622 splitting_factor, & 623 splitting_factor_max, & 624 splitting_function, & 625 splitting_mode, & 626 step_dealloc, & 627 use_sgs_for_particles, & 628 vertical_particle_advection, & 629 weight_factor_merge, & 630 weight_factor_split, & 631 write_particle_statistics 576 CHARACTER(LEN=100) :: line !< string containing current line of file PARIN 577 578 INTEGER(iwp) :: io_status !< status after reading the namelist file 632 579 633 580 NAMELIST /particle_parameters/ & … … 699 646 700 647 ! 701 !-- Position the namelist-file at the beginning (it was already opened in parin), search for the 702 !-- namelist-group of the package and position the file at this line. Do the same for each 703 !-- optionally used package. 704 line = ' ' 705 706 ! 707 !-- Try to find particles package 708 REWIND ( 11 ) 709 line = ' ' 710 DO WHILE ( INDEX( line, '&particle_parameters' ) == 0 ) 711 READ ( 11, '(A)', END=12 ) line 712 ENDDO 713 BACKSPACE ( 11 ) 714 ! 715 !-- Read user-defined namelist 716 READ ( 11, particle_parameters, ERR = 10 ) 717 ! 718 !-- Set flag that indicates that particles are switched on 719 particle_advection = .TRUE. 720 721 GOTO 14 722 723 10 BACKSPACE( 11 ) 724 READ( 11 , '(A)') line 725 CALL parin_fail_message( 'particle_parameters', line ) 726 ! 727 !-- Try to find particles package (old namelist) 728 12 REWIND ( 11 ) 729 line = ' ' 730 DO WHILE ( INDEX( line, '&particles_par' ) == 0 ) 731 READ ( 11, '(A)', END=14 ) line 732 ENDDO 733 BACKSPACE ( 11 ) 734 ! 735 !-- Read user-defined namelist 736 READ ( 11, particles_par, ERR = 13, END = 14 ) 737 738 message_string = 'namelist particles_par is deprecated and will be ' // & 739 'removed in near future. Please use namelist ' // & 740 'particle_parameters instead' 741 CALL message( 'package_parin', 'PA0487', 0, 1, 0, 6, 0 ) 742 743 ! 744 !-- Set flag that indicates that particles are switched on 745 particle_advection = .TRUE. 746 747 GOTO 14 748 749 13 BACKSPACE( 11 ) 750 READ( 11 , '(A)') line 751 CALL parin_fail_message( 'particles_par', line ) 752 753 14 CONTINUE 648 !-- Move to the beginning of the namelist file and try to find and read the namelist. 649 REWIND( 11 ) 650 READ( 11, particle_parameters, IOSTAT=io_status ) 651 ! 652 !-- Action depending on the READ status 653 IF ( io_status == 0 ) THEN 654 ! 655 !-- particle_parameters namelist was found and read correctly. Set flag that indicates that 656 !-- particles are switched on. 657 particle_advection = .TRUE. 658 659 ELSEIF ( io_status > 0 ) THEN 660 ! 661 !-- particle_parameters namelist was found, but contained errors. Print an error message 662 !-- including the line that caused the error. 663 BACKSPACE( 11 ) 664 READ( 11 , '(A)' ) line 665 CALL parin_fail_message( 'particle_parameters', line ) 666 667 ENDIF 754 668 755 669 END SUBROUTINE lpm_parin 670 756 671 757 672 !--------------------------------------------------------------------------------------------------! -
palm/trunk/SOURCE/land_surface_model_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more, 28 ! deprecated namelist removed 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 26 31 ! Enable 3D data output also with 64-bit precision 27 32 ! … … 4995 5000 SUBROUTINE lsm_parin 4996 5001 4997 USE control_parameters, &4998 ONLY: message_string4999 5000 5002 IMPLICIT NONE 5001 5003 5002 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 5003 5004 NAMELIST /lsm_par/ aero_resist_kray, & 5005 alpha_vangenuchten, & 5006 c_surface, & 5007 canopy_resistance_coefficient, & 5008 constant_roughness, & 5009 conserve_water_content, & 5010 deep_soil_temperature, & 5011 dz_soil, & 5012 f_shortwave_incoming, & 5013 field_capacity, & 5014 hydraulic_conductivity, & 5015 l_vangenuchten, & 5016 lambda_surface_stable, & 5017 lambda_surface_unstable, & 5018 leaf_area_index, & 5019 min_canopy_resistance, & 5020 min_soil_resistance, & 5021 n_vangenuchten, & 5022 pavement_depth_level, & 5023 pavement_heat_capacity, & 5024 pavement_heat_conduct, & 5025 pavement_type, & 5026 residual_moisture, & 5027 root_fraction, & 5028 saturation_moisture, & 5029 skip_time_do_lsm, & 5030 soil_moisture, & 5031 soil_temperature, & 5032 soil_type, & 5033 surface_type, & 5034 vegetation_coverage, & 5035 vegetation_type, & 5036 water_temperature, & 5037 water_type, & 5038 wilting_point, & 5039 z0_pavement, & 5040 z0_vegetation, & 5041 z0_water, & 5042 z0h_pavement, & 5043 z0h_vegetation, & 5044 z0h_water, & 5045 z0q_pavement, & 5046 z0q_vegetation, & 5047 z0q_water 5004 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter 5005 !< file 5006 INTEGER(iwp) :: io_status !< status after reading the nameslist file 5007 5048 5008 5049 5009 NAMELIST /land_surface_parameters/ aero_resist_kray, & … … 5092 5052 z0q_water 5093 5053 5094 line = ' ' 5095 5096 ! 5097 !-- Try to find land surface model package 5098 REWIND ( 11 ) 5099 line = ' ' 5100 DO WHILE ( INDEX( line, '&land_surface_parameters' ) == 0 ) 5101 READ ( 11, '(A)', END=12 ) line 5102 ENDDO 5103 BACKSPACE ( 11 ) 5104 5105 ! 5106 !-- Read user-defined namelist 5107 READ ( 11, land_surface_parameters, ERR = 10 ) 5108 5109 ! 5110 !-- Set flag that indicates that the land surface model is switched on 5111 land_surface = .TRUE. 5112 5113 GOTO 14 5114 5115 10 BACKSPACE( 11 ) 5116 READ( 11 , '(A)') line 5117 CALL parin_fail_message( 'land_surface_parameters', line ) 5118 ! 5119 !-- Try to find old namelist 5120 12 REWIND ( 11 ) 5121 line = ' ' 5122 DO WHILE ( INDEX( line, '&lsm_par' ) == 0 ) 5123 READ ( 11, '(A)', END=14 ) line 5124 ENDDO 5125 BACKSPACE ( 11 ) 5126 5127 ! 5128 !-- Read user-defined namelist 5129 READ ( 11, lsm_par, ERR = 13, END = 14 ) 5130 5131 message_string = 'namelist lsm_par is deprecated and will be ' // & 5132 'removed in near future. Please use namelist ' // & 5133 'land_surface_parameters instead' 5134 CALL message( 'lsm_parin', 'PA0487', 0, 1, 0, 6, 0 ) 5135 5136 ! 5137 !-- Set flag that indicates that the land surface model is switched on 5138 land_surface = .TRUE. 5139 5140 GOTO 14 5141 5142 13 BACKSPACE( 11 ) 5143 READ( 11 , '(A)') line 5144 CALL parin_fail_message( 'lsm_par', line ) 5145 5146 5147 14 CONTINUE 5148 5054 ! 5055 !-- Move to the beginning of the namelist file and try to find and read the namelist. 5056 REWIND( 11 ) 5057 READ( 11, land_surface_parameters, IOSTAT=io_status ) 5058 5059 ! 5060 !-- Action depending on the READ status 5061 IF ( io_status == 0 ) THEN 5062 ! 5063 !-- land_surface_parameters namelist was found and read correctly. Set flag that indicates that 5064 !-- the land surface model is switched on. 5065 land_surface = .TRUE. 5066 5067 ELSEIF ( io_status > 0 ) THEN 5068 ! 5069 !-- land_surface_parameters namelist was found but contained errors. Print an error message 5070 !-- including the line that caused the problem. 5071 BACKSPACE( 11 ) 5072 READ( 11 , '(A)') line 5073 CALL parin_fail_message( 'land_surface_parameters', line ) 5074 5075 ENDIF 5149 5076 5150 5077 END SUBROUTINE lsm_parin -
palm/trunk/SOURCE/multi_agent_system_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4828 2021-01-05 11:21:41Z Giersch 26 30 ! file re-formatted to follow the PALM coding standard 27 31 ! … … 3655 3659 IMPLICIT NONE 3656 3660 3657 CHARACTER (LEN=80) :: line !< 3661 CHARACTER(LEN=100) :: line !< dummy string for current line in namelist file 3662 3663 INTEGER(iwp) :: io_status !< status after reading the namelist file 3664 3658 3665 3659 3666 NAMELIST /agent_parameters/ a_rand_target, & … … 3699 3706 3700 3707 ! 3701 !-- Try to find agent package3708 !-- Move to the beginning of the namelist file and try to find and read the namelist. 3702 3709 REWIND ( 11 ) 3703 line = ' ' 3704 DO WHILE ( INDEX( line, '&agent_parameters' ) == 0 ) 3705 READ ( 11, '(A)', END=20 ) line 3706 ENDDO 3707 BACKSPACE ( 11 ) 3708 3709 ! 3710 !-- Read user-defined namelist 3711 READ ( 11, agent_parameters, ERR = 10, END = 20 ) 3712 3713 ! 3714 !-- Set flag that indicates that agents are switched on 3715 agents_active = .TRUE. 3716 GOTO 20 3717 3718 10 BACKSPACE( 11 ) 3719 READ( 11 , '(A)') line 3720 CALL parin_fail_message( 'agent_parameters', line ) 3721 3722 20 CONTINUE 3710 READ ( 11, agent_parameters, IOSTAT=io_status ) 3711 3712 ! 3713 !-- Action depending on the READ status 3714 IF ( io_status == 0 ) THEN 3715 ! 3716 !-- agent_parameters namelist was found and read correctly. Set flag that indicates that agents 3717 !-- are switched on. 3718 agents_active = .TRUE. 3719 3720 ELSEIF ( io_status > 0 ) THEN 3721 ! 3722 !-- agent_parameters namelist was found but contained errors. Print an error message including 3723 !-- the line that caused the problem. 3724 BACKSPACE( 11 ) 3725 READ( 11 , '(A)') line 3726 CALL parin_fail_message( 'agent_parameters', line ) 3727 3728 ENDIF 3723 3729 3724 3730 END SUBROUTINE mas_parin -
palm/trunk/SOURCE/nesting_offl_mod.f90
r4834 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4834 2021-01-07 10:28:00Z raasch 26 30 ! file re-formatted to follow the PALM coding standard 27 31 ! … … 2448 2452 SUBROUTINE nesting_offl_parin 2449 2453 2450 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 2451 2452 2453 NAMELIST /nesting_offl_parameters/ nesting_offline 2454 2455 line = ' ' 2456 2457 ! 2458 !-- Try to find stg package 2459 REWIND ( 11 ) 2460 line = ' ' 2461 DO WHILE ( INDEX( line, '&nesting_offl_parameters' ) == 0 ) 2462 READ ( 11, '(A)', END=20 ) line 2463 ENDDO 2464 BACKSPACE ( 11 ) 2465 2466 ! 2467 !-- Read namelist 2468 READ ( 11, nesting_offl_parameters, ERR = 10, END = 20 ) 2469 2470 GOTO 20 2471 2472 10 BACKSPACE( 11 ) 2473 READ( 11 , '(A)') line 2474 CALL parin_fail_message( 'nesting_offl_parameters', line ) 2475 2476 20 CONTINUE 2477 2454 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 2455 INTEGER(iwp) :: io_status !< status after reading the namelist file 2456 2457 2458 NAMELIST /nesting_offl_parameters/ nesting_offline 2459 2460 ! 2461 !-- Move to the beginning of the namelist file and try to find and read the namelist. 2462 REWIND( 11 ) 2463 READ( 11, nesting_offl_parameters, IOSTAT=io_status ) 2464 2465 ! 2466 !-- Action depending on the READ status 2467 IF ( io_status > 0 ) THEN 2468 ! 2469 !-- nesting_offl_parameters namelist was found but contained errors. Print an error message 2470 !-- including the line that caused the problem. 2471 BACKSPACE( 11 ) 2472 READ( 11 , '(A)' ) line 2473 CALL parin_fail_message( 'nesting_offl_parameters', line ) 2474 2475 ENDIF 2478 2476 2479 2477 END SUBROUTINE nesting_offl_parin 2478 2480 2479 2481 2480 !--------------------------------------------------------------------------------------------------! … … 2500 2499 2501 2500 END SUBROUTINE nesting_offl_header 2501 2502 2502 2503 2503 !--------------------------------------------------------------------------------------------------! -
palm/trunk/SOURCE/ocean_mod.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more 28 ! 29 ! 4828 2021-01-05 11:21:41Z Giersch 26 30 ! file re-formatted to follow the PALM coding standard 27 31 ! … … 572 576 IMPLICIT NONE 573 577 574 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 575 576 577 NAMELIST /ocean_parameters/ bc_sa_t, bottom_salinityflux, salinity, sa_surface, & 578 sa_vertical_gradient, sa_vertical_gradient_level, & 579 stokes_waveheight, stokes_wavelength, surface_cooling_spinup_time,& 580 top_salinityflux, wall_salinityflux, wave_breaking 581 582 ! 583 !-- Try to find the namelist 584 REWIND ( 11 ) 585 line = ' ' 586 DO WHILE ( INDEX( line, '&ocean_parameters' ) == 0 ) 587 READ ( 11, '(A)', END=12 ) line 588 ENDDO 589 BACKSPACE ( 11 ) 590 591 ! 592 !-- Read namelist 593 READ ( 11, ocean_parameters, ERR = 10 ) 594 ! 595 !-- Set switch that enables PALM's ocean mode 596 ocean_mode = .TRUE. 597 598 GOTO 12 599 600 10 BACKSPACE( 11 ) 601 READ( 11 , '(A)') line 602 CALL parin_fail_message( 'ocean_parameters', line ) 603 604 12 CONTINUE 578 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter 579 !< file 580 INTEGER(iwp) :: io_status !< status after reading the namelist file 581 582 583 NAMELIST /ocean_parameters/ bc_sa_t, & 584 bottom_salinityflux, & 585 salinity, & 586 sa_surface, & 587 sa_vertical_gradient, & 588 sa_vertical_gradient_level, & 589 stokes_waveheight, & 590 stokes_wavelength, & 591 surface_cooling_spinup_time, & 592 top_salinityflux, & 593 wall_salinityflux, & 594 wave_breaking 595 596 ! 597 !-- Move to the beginning of the namelist file and try to find and read the namelist called 598 !-- ocean_parameters. 599 REWIND( 11 ) 600 READ( 11, ocean_parameters, IOSTAT=io_status ) 601 602 ! 603 !-- Action depending on the READ status 604 IF ( io_status == 0 ) THEN 605 ! 606 !-- ocean_parameters namelist was found and read correctly. Set switch that enables PALM's ocean 607 !-- mode. 608 ocean_mode = .TRUE. 609 610 ELSEIF ( io_status > 0 ) THEN 611 ! 612 !-- ocean_parameters namelist was found but contained errors. Print an error message including 613 !-- the line that caused the problem. 614 BACKSPACE( 11 ) 615 READ( 11 , '(A)') line 616 CALL parin_fail_message( 'ocean_parameters', line ) 617 618 ENDIF 605 619 606 620 END SUBROUTINE ocean_parin 621 607 622 608 623 !--------------------------------------------------------------------------------------------------! -
palm/trunk/SOURCE/parin.f90
r4828 r4842 24 24 ! ----------------- 25 25 ! $Id$ 26 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 27 ! and goto statements are not required any more, 28 ! deprecated namelists removed 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 26 31 ! file re-formatted to follow the PALM coding standard 27 32 ! … … 162 167 IMPLICIT NONE 163 168 164 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 169 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter 170 !< file 165 171 166 172 INTEGER(iwp) :: global_id !< process id with respect to MPI_COMM_WORLD 167 173 INTEGER(iwp) :: global_procs !< # of procs with respect to MPI_COMM_WORLD 168 174 INTEGER(iwp) :: i !< 169 INTEGER(iwp) :: ioerr !< error flag for open/read/write 170 171 NAMELIST /inipar/ alpha_surface, & 172 approximation, & 173 bc_e_b, & 174 bc_lr, & 175 bc_ns, & 176 bc_p_b, & 177 bc_p_t, & 178 bc_pt_b, & 179 bc_pt_t, & 180 bc_q_b, & 181 bc_q_t, & 182 bc_s_b, & 183 bc_s_t, & 184 bc_uv_b, & 185 bc_uv_t, & 186 building_height, & 187 building_length_x, & 188 building_length_y, & 189 building_wall_left, & 190 building_wall_south, & 191 calc_soil_moisture_during_spinup, & 192 call_psolver_at_all_substeps, & 193 canyon_height, & 194 canyon_wall_left, & 195 canyon_wall_south, & 196 canyon_width_x, & 197 canyon_width_y, & 198 cfl_factor, & 199 check_realistic_q, & 200 cloud_droplets, & 201 collective_wait, & 202 complex_terrain, & 203 conserve_volume_flow, & 204 conserve_volume_flow_mode, & 205 constant_flux_layer, & 206 coupling_start_time, & 207 cycle_mg, & 208 damp_level_1d, & 209 data_output_during_spinup, & 210 dissipation_1d, & 211 dp_external, & 212 dp_level_b, & 213 dp_smooth, & 214 dpdxy, & 215 dt, & 216 dt_pr_1d, & 217 dt_run_control_1d, & 218 dt_spinup, & 219 dx, & 220 dy, & 221 dz, & 222 dz_max, & 223 dz_stretch_factor, & 224 dz_stretch_level, & 225 dz_stretch_level_end, & 226 dz_stretch_level_start, & 227 e_init, & 228 e_min, & 229 end_time_1d, & 230 ensemble_member_nr, & 231 fft_method, & 232 flux_input_mode, & 233 flux_output_mode, & 234 galilei_transformation, & 235 humidity, & 236 inflow_damping_height, & 237 inflow_damping_width, & 238 inflow_disturbance_begin, & 239 inflow_disturbance_end, & 240 initializing_actions, & 241 km_constant, & 242 large_scale_forcing, & 243 large_scale_subsidence, & 244 latitude, & 245 longitude, & 246 loop_optimization, & 247 lsf_exception, & 248 masking_method, & 249 mg_cycles, & 250 mg_switch_to_pe0_level, & 251 mixing_length_1d, & 252 momentum_advec, & 253 monotonic_limiter_z, & 254 netcdf_precision, & 255 neutral, & 256 ngsrb, & 257 nsor, & 258 nsor_ini, & 259 nudging, & 260 nx, & 261 ny, & 262 nz, & 263 ocean_mode, & 264 omega, & 265 omega_sor, & 266 origin_date_time, & 267 outflow_source_plane, & 268 passive_scalar, & 269 prandtl_number, & 270 psolver, & 271 pt_damping_factor, & 272 pt_damping_width, & 273 pt_reference, & 274 pt_surface, & 275 pt_surface_heating_rate, & 276 pt_surface_initial_change, & 277 pt_vertical_gradient, & 278 pt_vertical_gradient_level, & 279 q_surface, & 280 q_surface_initial_change, & 281 q_vertical_gradient, & 282 q_vertical_gradient_level, & 283 random_generator, & 284 random_heatflux, & 285 rans_const_c, & 286 rans_const_sigma, & 287 rayleigh_damping_factor, & 288 rayleigh_damping_height, & 289 recycling_method_for_thermodynamic_quantities, & 290 recycling_width, & 291 reference_state, & 292 residual_limit, & 293 rotation_angle, & 294 roughness_length, & 295 scalar_advec, & 296 scalar_rayleigh_damping, & 297 spinup_time, & 298 spinup_pt_amplitude, & 299 spinup_pt_mean, & 300 statistic_regions, & 301 subs_vertical_gradient, & 302 subs_vertical_gradient_level, & 303 surface_heatflux, & 304 surface_pressure, & 305 surface_scalarflux, & 306 surface_waterflux, & 307 s_surface, & 308 s_surface_initial_change, & 309 s_vertical_gradient, & 310 s_vertical_gradient_level, & 311 timestep_scheme, & 312 topography, & 313 topography_grid_convention, & 314 top_heatflux, & 315 top_momentumflux_u, & 316 top_momentumflux_v, & 317 top_scalarflux, & 318 transpose_compute_overlap, & 319 tunnel_height, & 320 tunnel_length, & 321 tunnel_wall_depth, & 322 tunnel_width_x, & 323 tunnel_width_y, & 324 turbulence_closure, & 325 turbulent_inflow, & 326 turbulent_outflow, & 327 u_bulk, & 328 u_profile, & 329 ug_surface, & 330 ug_vertical_gradient, & 331 ug_vertical_gradient_level, & 332 use_cmax, & 333 use_fixed_date, & 334 use_fixed_time, & 335 use_free_convection_scaling, & 336 use_ug_for_galilei_tr, & 337 use_subsidence_tendencies, & 338 use_surface_fluxes, & 339 use_top_fluxes, & 340 use_upstream_for_tke, & 341 uv_heights, & 342 v_bulk, & 343 v_profile, & 344 vdi_checks, & 345 vg_surface, & 346 vg_vertical_gradient, & 347 vg_vertical_gradient_level, & 348 wall_adjustment, & 349 wall_heatflux, & 350 wall_humidityflux, & 351 wall_scalarflux, & 352 y_shift, & 353 zeta_max, & 354 zeta_min, & 355 z0h_factor 175 INTEGER(iwp) :: io_status !< status after reading the namelist files 176 356 177 357 178 NAMELIST /initialization_parameters/ alpha_surface, & … … 541 362 z0h_factor 542 363 543 NAMELIST /d3par/ averaging_interval, &544 averaging_interval_pr, &545 cpu_log_barrierwait, &546 create_disturbances, &547 cross_profiles, &548 data_output, &549 data_output_2d_on_each_pe, &550 data_output_masks, &551 data_output_pr, &552 debug_output, &553 debug_output_timestep, &554 disturbance_amplitude, &555 disturbance_energy_limit, &556 disturbance_level_b, &557 disturbance_level_t, &558 do2d_at_begin, &559 do3d_at_begin, &560 dt, &561 dt_averaging_input, &562 dt_averaging_input_pr, &563 dt_coupling, &564 dt_data_output, &565 dt_data_output_av, &566 dt_disturb, &567 dt_domask, &568 dt_dopr, &569 dt_dopr_listing, &570 dt_dots, &571 dt_do2d_xy, &572 dt_do2d_xz, &573 dt_do2d_yz, &574 dt_do3d, &575 dt_max, &576 dt_restart, &577 dt_run_control, &578 end_time, &579 force_print_header, &580 mask_k_over_surface, &581 mask_scale_x, &582 mask_scale_y, &583 mask_scale_z, &584 mask_x, &585 mask_y, &586 mask_z, &587 mask_x_loop, &588 mask_y_loop, &589 mask_z_loop, &590 netcdf_data_format, &591 netcdf_deflate, &592 normalizing_region, &593 npex, &594 npey, &595 nz_do3d, &596 profile_columns, &597 profile_rows, &598 restart_time, &599 section_xy, &600 section_xz, &601 section_yz, &602 skip_time_data_output, &603 skip_time_data_output_av, &604 skip_time_dopr, &605 skip_time_do2d_xy, &606 skip_time_do2d_xz, &607 skip_time_do2d_yz, &608 skip_time_do3d, &609 skip_time_domask, &610 synchronous_exchange, &611 termination_time_needed612 613 364 NAMELIST /runtime_parameters/ averaging_interval, & 614 365 averaging_interval_pr, & … … 699 450 CALL location_message( 'reading environment parameters from ENVPAR', 'start' ) 700 451 701 OPEN( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', IOSTAT=io err)702 703 IF ( io err/= 0 ) THEN452 OPEN( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', IOSTAT=io_status ) 453 454 IF ( io_status /= 0 ) THEN 704 455 message_string = 'local file ENVPAR not found' // & 705 456 '&some variables for steering may not be properly set' 706 457 CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 ) 707 458 ELSE 708 READ( 90, envpar, IOSTAT=io err)709 IF ( io err< 0 ) THEN459 READ( 90, envpar, IOSTAT=io_status ) 460 IF ( io_status < 0 ) THEN 710 461 message_string = 'no envpar-NAMELIST found in local file ' // & 711 'ENVPAR& or some variables for steering may ' // & 712 'not be properly set' 462 'ENVPAR& or some variables for steering may not be properly set' 713 463 CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 ) 714 ELSEIF ( io err> 0 ) THEN464 ELSEIF ( io_status > 0 ) THEN 715 465 message_string = 'errors in local file ENVPAR' // & 716 466 '&some variables for steering may not be properly set' … … 730 480 ! 731 481 !-- Read the control parameters for initialization. 732 !-- The namelist "inipar" must be provided in the NAMELIST-file. 733 READ ( 11, initialization_parameters, ERR=10, END=11 ) 734 GOTO 14 735 736 10 BACKSPACE( 11 ) 737 READ( 11 , '(A)') line 738 CALL parin_fail_message( 'initialization_parameters', line ) 739 740 11 REWIND ( 11 ) 741 READ( 11, inipar, ERR=12, END=13 ) 742 743 message_string = 'namelist inipar is deprecated and will be ' // & 744 'removed in near future. & Please use namelist ' // & 745 'initialization_parameters instead' 746 CALL message( 'parin', 'PA0017', 0, 1, 0, 6, 0 ) 747 748 GOTO 14 749 750 12 BACKSPACE( 11 ) 751 READ( 11 , '(A)') line 752 CALL parin_fail_message( 'inipar', line ) 753 754 13 message_string = 'no initialization_parameters-namelist found' 755 CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 ) 756 482 !-- The namelist "initialisation_parameters" must be provided in the NAMELIST-file. 483 READ( 11, initialization_parameters, IOSTAT=io_status ) 484 485 ! 486 !-- Action depending on the READ status 487 IF ( io_status > 0 ) THEN 488 ! 489 !-- initialisation_parameters namelist was found but countained errors. Print an error message 490 !- including the line that caused the problem. 491 BACKSPACE( 11 ) 492 READ( 11 , '(A)' ) line 493 CALL parin_fail_message( 'initialization_parameters', line ) 494 495 ELSEIF ( io_status < 0 ) THEN 496 ! 497 !-- initialisation_parametes namelist was not found. Return a message. 498 message_string = 'no initialization_parameters-namelist found' 499 CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 ) 500 501 ENDIF 757 502 ! 758 503 !-- Try to read runtime parameters given by the user for this run (namelist "runtime_parameters"). 759 504 !-- The namelist "runtime_parmeters" can be omitted. In that case default values are used for the 760 505 !-- parameters. 761 14 line = ' '762 763 506 REWIND( 11 ) 764 line = ' ' 765 DO WHILE ( INDEX( line, '&runtime_parameters' ) == 0 ) 766 READ( 11, '(A)', END=16 ) line 767 ENDDO 768 BACKSPACE( 11 ) 769 770 ! 771 !-- Read namelist 772 READ( 11, runtime_parameters, ERR = 15 ) 773 GOTO 18 774 775 15 BACKSPACE( 11 ) 776 READ( 11 , '(A)') line 777 CALL parin_fail_message( 'runtime_parameters', line ) 778 779 16 REWIND( 11 ) 780 line = ' ' 781 DO WHILE ( INDEX( line, '&d3par' ) == 0 ) 782 READ( 11, '(A)', END=18 ) line 783 ENDDO 784 BACKSPACE ( 11 ) 785 786 ! 787 !-- Read namelist 788 READ( 11, d3par, ERR = 17, END = 18 ) 789 790 message_string = 'namelist d3par is deprecated and will be ' // & 791 'removed in near future. &Please use namelist ' // & 792 'runtime_parameters instead' 793 CALL message( 'parin', 'PA0487', 0, 1, 0, 6, 0 ) 794 795 GOTO 18 796 797 17 BACKSPACE( 11 ) 798 READ( 11 , '(A)') line 799 CALL parin_fail_message( 'd3par', line ) 800 801 18 CONTINUE 507 READ( 11, runtime_parameters, IOSTAT=io_status ) 508 509 IF ( io_status > 0 ) THEN 510 ! 511 !-- Namelist runtime_parameters was found but contained errors. Print an error message including 512 !-- the line that caused the problem. 513 BACKSPACE( 11 ) 514 READ( 11 , '(A)') line 515 CALL parin_fail_message( 'runtime_parameters', line ) 516 517 ENDIF 802 518 803 519 ! -
palm/trunk/SOURCE/plant_canopy_model_mod.f90
r4828 r4842 26 26 ! ----------------- 27 27 ! $Id$ 28 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 29 ! and goto statements are not required any more, 30 ! deprecaed namelist name removed 31 ! 32 ! 4828 2021-01-05 11:21:41Z Giersch 28 33 ! file re-formatted to follow the PALM coding standard 29 34 ! … … 1550 1555 !> Parin for &plant_canopy_parameters for plant canopy model 1551 1556 !--------------------------------------------------------------------------------------------------! 1552 SUBROUTINE pcm_parin 1553 1554 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 1555 1556 NAMELIST /plant_canopy_parameters/ alpha_lad, & 1557 beta_lad, & 1558 canopy_drag_coeff, & 1559 canopy_mode, & 1560 cthf, & 1561 lad_surface, & 1562 lad_type_coef, & 1563 lad_vertical_gradient, & 1564 lad_vertical_gradient_level, & 1565 lai_beta, & 1566 leaf_scalar_exch_coeff, & 1567 leaf_surface_conc, & 1568 pch_index, & 1569 plant_canopy_transpiration 1570 1571 NAMELIST /canopy_par/ alpha_lad, & 1572 beta_lad, & 1573 canopy_drag_coeff, & 1574 canopy_mode, & 1575 cthf, & 1576 lad_surface, & 1577 lad_type_coef, & 1578 lad_vertical_gradient, & 1579 lad_vertical_gradient_level, & 1580 lai_beta, & 1581 leaf_scalar_exch_coeff, & 1582 leaf_surface_conc, & 1583 pch_index, & 1584 plant_canopy_transpiration 1585 1586 line = ' ' 1587 1588 ! 1589 !-- Try to find plant-canopy model package 1590 REWIND( 11 ) 1591 line = ' ' 1592 DO WHILE ( INDEX( line, '&plant_canopy_parameters' ) == 0 ) 1593 READ( 11, '(A)', END=12 ) line 1594 ENDDO 1557 SUBROUTINE pcm_parin 1558 1559 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 1560 1561 INTEGER(iwp) :: io_status !< status after reading the namelist file 1562 1563 1564 NAMELIST /plant_canopy_parameters/ alpha_lad, & 1565 beta_lad, & 1566 canopy_drag_coeff, & 1567 canopy_mode, & 1568 cthf, & 1569 lad_surface, & 1570 lad_type_coef, & 1571 lad_vertical_gradient, & 1572 lad_vertical_gradient_level, & 1573 lai_beta, & 1574 leaf_scalar_exch_coeff, & 1575 leaf_surface_conc, & 1576 pch_index, & 1577 plant_canopy_transpiration 1578 1579 ! 1580 !-- Move to the beginning of the namelist file and try to find and read the user-defined namelist 1581 !-- plant_canopy_parameters. 1582 REWIND( 11 ) 1583 READ( 11, plant_canopy_parameters, IOSTAT=io_status ) 1584 1585 ! 1586 !-- Action depending on the READ status 1587 IF ( io_status == 0 ) THEN 1588 ! 1589 !-- plant_canopy_parameters namelist was found and read correctly. Set flag that indicates that 1590 !-- the plant-canopy model is switched on. 1591 plant_canopy = .TRUE. 1592 1593 ELSEIF ( io_status > 0 ) THEN 1594 ! 1595 !-- plant_canopy_parameters namelist was found but contained errors. Print an error message 1596 !-- including the line that caused the problem. 1595 1597 BACKSPACE( 11 ) 1596 1597 ! 1598 !-- Read user-defined namelist 1599 READ( 11, plant_canopy_parameters, ERR = 10 ) 1600 1601 ! 1602 !-- Set flag that indicates that the plant-canopy model is switched on 1603 plant_canopy = .TRUE. 1604 1605 GOTO 14 1606 1607 10 BACKSPACE( 11 ) 1608 READ( 11 , '(A)') line 1598 READ( 11 , '(A)' ) line 1609 1599 CALL parin_fail_message( 'plant_canopy_parameters', line ) 1610 ! 1611 !-- Try to find old namelist 1612 12 REWIND( 11 ) 1613 line = ' ' 1614 DO WHILE ( INDEX( line, '&canopy_par' ) == 0 ) 1615 READ( 11, '(A)', END=14 ) line 1616 ENDDO 1617 BACKSPACE( 11 ) 1618 1619 ! 1620 !-- Read user-defined namelist 1621 READ( 11, canopy_par, ERR = 13, END = 14 ) 1622 1623 message_string = 'namelist canopy_par is deprecated and will be ' // & 1624 'removed in near future. Please use namelist ' // & 1625 'plant_canopy_parameters instead' 1626 CALL message( 'pcm_parin', 'PA0487', 0, 1, 0, 6, 0 ) 1627 1628 ! 1629 !-- Set flag that indicates that the plant-canopy model is switched on 1630 plant_canopy = .TRUE. 1631 1632 GOTO 14 1633 1634 13 BACKSPACE( 11 ) 1635 READ( 11 , '(A)') line 1636 CALL parin_fail_message( 'canopy_par', line ) 1637 1638 14 CONTINUE 1639 1640 END SUBROUTINE pcm_parin 1600 1601 ENDIF 1602 1603 END SUBROUTINE pcm_parin 1641 1604 1642 1605 -
palm/trunk/SOURCE/radiation_model_mod.f90
r4836 r4842 27 27 ! ----------------- 28 28 ! $Id$ 29 ! openmp bugfix: some missing arrays added to reduction clause 29 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 30 ! and goto statements are not required any more, 31 ! deprectaed namelist name removed 32 ! 33 ! 4836 2021-01-07 13:58:12Z raasch 34 ! openmp bugfix: some missing arrays added to reduction clause 30 35 ! 31 36 ! 4824 2020-12-12 20:45:23Z moh.hefny … … 717 722 0.06_wp, 0.06_wp, 0.06_wp, & ! 1 - ocean 718 723 0.19_wp, 0.28_wp, 0.09_wp, & ! 2 - mixed farming, tall grassland 719 0.23_wp, 0.33_wp, 0.11_wp, & ! 3 - tall/medium grassland 720 0.23_wp, 0.33_wp, 0.11_wp, & ! 4 - evergreen shrubland 721 0.25_wp, 0.34_wp, 0.14_wp, & ! 5 - short grassland/meadow/shrubland 722 0.14_wp, 0.22_wp, 0.06_wp, & ! 6 - evergreen needleleaf forest 723 0.17_wp, 0.27_wp, 0.06_wp, & ! 7 - mixed deciduous forest 724 0.19_wp, 0.31_wp, 0.06_wp, & ! 8 - deciduous forest 724 0.23_wp, 0.33_wp, 0.11_wp, & ! 3 - tall/medium grassland 725 0.23_wp, 0.33_wp, 0.11_wp, & ! 4 - evergreen shrubland 726 0.25_wp, 0.34_wp, 0.14_wp, & ! 5 - short grassland/meadow/shrubland 727 0.14_wp, 0.22_wp, 0.06_wp, & ! 6 - evergreen needleleaf forest 728 0.17_wp, 0.27_wp, 0.06_wp, & ! 7 - mixed deciduous forest 729 0.19_wp, 0.31_wp, 0.06_wp, & ! 8 - deciduous forest 725 730 0.14_wp, 0.22_wp, 0.06_wp, & ! 9 - tropical evergreen broadleaved forest 726 0.18_wp, 0.28_wp, 0.06_wp, & ! 10 - medium/tall grassland/woodland 727 0.43_wp, 0.51_wp, 0.35_wp, & ! 11 - desert, sandy 728 0.32_wp, 0.40_wp, 0.24_wp, & ! 12 - desert, rocky 729 0.19_wp, 0.27_wp, 0.10_wp, & ! 13 - tundra 730 0.77_wp, 0.65_wp, 0.90_wp, & ! 14 - land ice 731 0.77_wp, 0.65_wp, 0.90_wp, & ! 15 - sea ice 732 0.82_wp, 0.70_wp, 0.95_wp, & ! 16 - snow 733 0.08_wp, 0.08_wp, 0.08_wp, & ! 17 - bare soil 734 0.17_wp, 0.17_wp, 0.17_wp, & ! 18 - asphalt/concrete mix 735 0.17_wp, 0.17_wp, 0.17_wp, & ! 19 - asphalt (asphalt concrete) 736 0.30_wp, 0.30_wp, 0.30_wp, & ! 20 - concrete (Portland concrete) 737 0.17_wp, 0.17_wp, 0.17_wp, & ! 21 - sett 731 0.18_wp, 0.28_wp, 0.06_wp, & ! 10 - medium/tall grassland/woodland 732 0.43_wp, 0.51_wp, 0.35_wp, & ! 11 - desert, sandy 733 0.32_wp, 0.40_wp, 0.24_wp, & ! 12 - desert, rocky 734 0.19_wp, 0.27_wp, 0.10_wp, & ! 13 - tundra 735 0.77_wp, 0.65_wp, 0.90_wp, & ! 14 - land ice 736 0.77_wp, 0.65_wp, 0.90_wp, & ! 15 - sea ice 737 0.82_wp, 0.70_wp, 0.95_wp, & ! 16 - snow 738 0.08_wp, 0.08_wp, 0.08_wp, & ! 17 - bare soil 739 0.17_wp, 0.17_wp, 0.17_wp, & ! 18 - asphalt/concrete mix 740 0.17_wp, 0.17_wp, 0.17_wp, & ! 19 - asphalt (asphalt concrete) 741 0.30_wp, 0.30_wp, 0.30_wp, & ! 20 - concrete (Portland concrete) 742 0.17_wp, 0.17_wp, 0.17_wp, & ! 21 - sett 738 743 0.17_wp, 0.17_wp, 0.17_wp, & ! 22 - paving stones 739 0.17_wp, 0.17_wp, 0.17_wp, & ! 23 - cobblestone 744 0.17_wp, 0.17_wp, 0.17_wp, & ! 23 - cobblestone 740 745 0.17_wp, 0.17_wp, 0.17_wp, & ! 24 - metal 741 746 0.17_wp, 0.17_wp, 0.17_wp, & ! 25 - wood 742 747 0.17_wp, 0.17_wp, 0.17_wp, & ! 26 - gravel 743 0.17_wp, 0.17_wp, 0.17_wp, & ! 27 - fine gravel 744 0.17_wp, 0.17_wp, 0.17_wp, & ! 28 - pebblestone 748 0.17_wp, 0.17_wp, 0.17_wp, & ! 27 - fine gravel 749 0.17_wp, 0.17_wp, 0.17_wp, & ! 28 - pebblestone 745 750 0.17_wp, 0.17_wp, 0.17_wp, & ! 29 - woodchips 746 751 0.17_wp, 0.17_wp, 0.17_wp, & ! 30 - tartan (sports) 747 752 0.17_wp, 0.17_wp, 0.17_wp, & ! 31 - artificial turf (sports) 748 0.17_wp, 0.17_wp, 0.17_wp, & ! 32 - clay (sports) 753 0.17_wp, 0.17_wp, 0.17_wp, & ! 32 - clay (sports) 749 754 0.17_wp, 0.17_wp, 0.17_wp, & ! 33 - building (dummy) 750 755 0.60_wp, 0.60_wp, 0.60_wp, & ! 34 - building wall type 1 - reflecting facade … … 4105 4110 SUBROUTINE radiation_parin 4106 4111 4107 4108 4112 IMPLICIT NONE 4109 4113 4110 CHARACTER(LEN=80) :: line !< dummy string that contains the current line of the parameter file 4111 4112 NAMELIST /radiation_par/ albedo, & 4113 albedo_lw_dif, & 4114 albedo_lw_dir, & 4115 albedo_sw_dif, & 4116 albedo_sw_dir, & 4117 albedo_type, & 4118 bufsize_alltoall, & 4119 constant_albedo, & 4120 dt_radiation, & 4121 emissivity, & 4122 lw_radiation, & 4123 max_raytracing_dist, & 4124 min_irrf_value, & 4125 mrt_geom, & 4126 mrt_geom_params, & 4127 mrt_include_sw, & 4128 mrt_nlevels, & 4129 mrt_skip_roof, & 4130 net_radiation, & 4131 nrefsteps, & 4132 plant_lw_interact, & 4133 rad_angular_discretization, & 4134 radiation_interactions_on, & 4135 radiation_scheme, & 4136 raytrace_discrete_azims, & 4137 raytrace_discrete_elevs, & 4138 raytrace_mpi_rma, & 4139 trace_fluxes_above, & 4140 skip_time_do_radiation, & 4141 surface_reflections, & 4142 svfnorm_report_thresh, & 4143 sw_radiation, & 4144 unscheduled_radiation_calls 4114 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 4115 4116 INTEGER(iwp) :: io_status !< status after reading the namelist file 4145 4117 4146 4118 … … 4179 4151 unscheduled_radiation_calls 4180 4152 4181 line = ' ' 4182 4183 ! 4184 !-- Try to find radiation model namelist 4153 ! 4154 !-- Move to the beginning of the namelist file and try to find and read the namelist. 4185 4155 REWIND( 11 ) 4186 line = ' ' 4187 DO WHILE ( INDEX( line, '&radiation_parameters' ) == 0 ) 4188 READ( 11, '(A)', END = 12 ) line 4189 ENDDO 4190 BACKSPACE( 11 ) 4191 4192 ! 4193 !-- Read user-defined namelist 4194 READ( 11, radiation_parameters, ERR = 10 ) 4195 4196 ! 4197 !-- Set flag that indicates that the radiation model is switched on 4198 radiation = .TRUE. 4199 4200 GOTO 14 4201 4202 10 BACKSPACE( 11 ) 4203 READ( 11 , '(A)') line 4204 CALL parin_fail_message( 'radiation_parameters', line ) 4205 ! 4206 !-- Try to find old namelist 4207 12 REWIND( 11 ) 4208 line = ' ' 4209 DO WHILE ( INDEX( line, '&radiation_par' ) == 0 ) 4210 READ( 11, '(A)', END = 14 ) line 4211 ENDDO 4212 BACKSPACE( 11 ) 4213 4214 ! 4215 !-- Read user-defined namelist 4216 READ( 11, radiation_par, ERR = 13, END = 14 ) 4217 4218 message_string = 'namelist radiation_par is deprecated and will be removed in near future. '// & 4219 'Please use namelist radiation_parameters instead' 4220 CALL message( 'radiation_parin', 'PA0487', 0, 1, 0, 6, 0 ) 4221 4222 ! 4223 !-- Set flag that indicates that the radiation model is switched on 4224 radiation = .TRUE. 4225 4226 IF ( .NOT. radiation_interactions_on .AND. surface_reflections ) THEN 4227 message_string = 'surface_reflections is allowed only when ' // & 4228 'radiation_interactions_on is set to TRUE' 4229 CALL message( 'radiation_parin', 'PA0293',1, 2, 0, 6, 0 ) 4156 READ( 11, radiation_parameters, IOSTAT=io_status ) 4157 4158 ! 4159 !-- Action depending on the READ status 4160 IF ( io_status == 0 ) THEN 4161 ! 4162 !-- radiation_parameters namelist was found and read correctly. Set flag that indicates that the 4163 !-- radiation model is switched on. 4164 radiation = .TRUE. 4165 4166 ELSEIF ( io_status > 0 ) THEN 4167 ! 4168 !-- radiation_parameters namelist was found but contained errors. Print an error message 4169 !-- including the line that caused the problem. 4170 BACKSPACE( 11 ) 4171 READ( 11 , '(A)' ) line 4172 CALL parin_fail_message( 'radiation_parameters', line ) 4173 4230 4174 ENDIF 4231 4232 GOTO 144233 4234 13 BACKSPACE( 11 )4235 READ( 11 , '(A)') line4236 CALL parin_fail_message( 'radiation_par', line )4237 4238 14 CONTINUE4239 4175 4240 4176 END SUBROUTINE radiation_parin -
palm/trunk/SOURCE/salsa_mod.f90
r4828 r4842 3 3 ! This file is part of PALM-4U. 4 4 ! 5 ! PALM-4U is free software: you can redistribute it and/or modify it under the 6 ! terms of the GNU General Public License as published by the Free Software 7 ! Foundation, either version 3 of the License, or (at your option) any later 5 ! PALM-4U is free software: you can redistribute it and/or modify it under the 6 ! terms of the GNU General Public License as published by the Free Software 7 ! Foundation, either version 3 of the License, or (at your option) any later 8 8 ! version. 9 9 ! … … 26 26 ! ----------------- 27 27 ! $Id$ 28 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 29 ! and goto statements are not required any more 30 ! 31 ! 4828 2021-01-05 11:21:41Z Giersch 28 32 ! Bugfix in obtaining the correct timestamp in case of restart runs 29 33 ! … … 39 43 ! 4671 2020-09-09 20:27:58Z pavelkrc 40 44 ! Implementation of downward facing USM and LSM surfaces 41 ! 45 ! 42 46 ! 4535 2020-05-15 12:07:23Z raasch 43 47 ! bugfix for restart data format query 44 ! 48 ! 45 49 ! 4527 2020-05-11 09:39:55Z monakurppa 46 50 ! Correct a bug in salsa_wrd_global and salsa_check_data_output, 47 51 ! and add reglim to be read/written in the restart data 48 ! 52 ! 49 53 ! 4525 2020-05-10 17:05:07Z raasch 50 54 ! added reading/writing of global restart data, 51 55 ! added reading/writing restart data with MPI-IO, 52 56 ! variable write_binary_salsa removed 53 ! 57 ! 54 58 ! 4512 2020-04-30 12:55:34Z monakurppa 55 59 ! Fixed a bug in component_index_constructor: index out of bounds if all chemical 56 60 ! components are used 57 ! 61 ! 58 62 ! 4508 2020-04-24 13:32:20Z raasch 59 63 ! decycling replaced by explicit setting of lateral boundary conditions (Siggi) 60 ! 64 ! 61 65 ! 4487 2020-04-03 09:38:20Z raasch 62 66 ! bugfix for subroutine calls that contain the decycle_salsa switches as arguments 63 ! 67 ! 64 68 ! 4481 2020-03-31 18:55:54Z maronga 65 69 ! Bug fix to the previous commit: the logical switch monotonic_limiter_z missing 66 70 ! from advec_s_ws in salsa_tendency_ij 67 ! 71 ! 68 72 ! 4478 2020-03-27 14:06:23Z monakurppa 69 73 ! Bug fixes: 70 74 ! - call salsa_driver in salsa_init also for the ghost points 71 75 ! - decycle flags missing from advec_s_ws call in salsa_tendency 72 ! 76 ! 73 77 ! 4457 2020-03-11 14:20:43Z raasch 74 78 ! use statement for exchange horiz added 75 ! 79 ! 76 80 ! 4442 2020-03-04 19:21:13Z suehring 77 ! Change order of dimension in surface array %frac to allow for better 81 ! Change order of dimension in surface array %frac to allow for better 78 82 ! vectorization. 79 ! 83 ! 80 84 ! 4441 2020-03-04 19:20:35Z suehring 81 85 ! Bug fixes and reformatting for the restart data and averaged data output … … 86 90 ! chemical components: set to 4d arrays instead of separate arrays 87 91 ! - add allocation checks for averaged data output arrays 88 ! 92 ! 89 93 ! 4416 2020-02-20 17:53:57Z monakurppa 90 94 ! Time index error in salsa_emission_setup 91 ! 95 ! 92 96 ! 4380 2020-01-17 23:39:51Z monakurppa 93 97 ! - Error in saving the surface fluxes in an array that is applied in the … … 95 99 ! - Corrections in the header: aerosol bin diameters and lower bin limits not 96 100 ! printed correctly 97 ! 101 ! 98 102 ! 4364 2020-01-08 02:12:31Z monakurppa 99 103 ! Set time coordinate in the input data relative to origin_time rather than to 100 104 ! 00:00:00 UTC 101 ! 105 ! 102 106 ! 4360 2020-01-07 11:25:50Z suehring 103 107 ! Introduction of wall_flags_total_0, which currently sets bits based on static 104 108 ! topography information used in wall_flags_static_0 105 ! 109 ! 106 110 ! 4342 2019-12-16 13:49:14Z Giersch 107 111 ! cdc replaced by canopy_drag_coeff 108 ! 112 ! 109 113 ! 4329 2019-12-10 15:46:36Z motisi 110 114 ! Renamed wall_flags_0 to wall_flags_static_0 111 ! 115 ! 112 116 ! 4315 2019-12-02 09:20:07Z monakurppa 113 117 ! Add an additional check for the time dimension PIDS_SALSA in 114 118 ! salsa_emission_setup and correct some error message identifiers. 115 ! 119 ! 116 120 ! 4298 2019-11-21 15:59:16Z suehring 117 121 ! Bugfix, close netcdf input files after reading 118 ! 122 ! 119 123 ! 4295 2019-11-14 06:15:31Z monakurppa 120 ! 121 ! 124 ! 125 ! 122 126 ! 4280 2019-10-29 14:34:15Z monakurppa 123 127 ! Corrected a bug in boundary conditions and fac_dt in offline nesting 124 ! 128 ! 125 129 ! 4273 2019-10-24 13:40:54Z monakurppa 126 130 ! - Rename nest_salsa to nesting_salsa … … 129 133 ! chemistry module is applied 130 134 ! - Set the default value of nesting_salsa and nesting_offline_salsa to .TRUE. 131 ! 135 ! 132 136 ! 4272 2019-10-23 15:18:57Z schwenkel 133 137 ! Further modularization of boundary conditions: moved boundary conditions to … … 144 148 ! - Reformat salsa emission data with LOD=2: size distribution given for each 145 149 ! emission category 146 ! 150 ! 147 151 ! 4268 2019-10-17 11:29:38Z schwenkel 148 152 ! Moving module specific boundary conditions from time_integration to module 149 ! 153 ! 150 154 ! 4256 2019-10-07 10:08:52Z monakurppa 151 155 ! Document previous changes: use global variables nx, ny and nz in salsa_header 152 ! 156 ! 153 157 ! 4227 2019-09-10 18:04:34Z gronemeier 154 158 ! implement new palm_date_time_mod 155 ! 159 ! 156 160 ! 4226 2019-09-10 17:03:24Z suehring 157 161 ! Netcdf input routine for dimension length renamed 158 ! 162 ! 159 163 ! 4182 2019-08-22 15:20:23Z scharf 160 164 ! Corrected "Former revisions" section 161 ! 165 ! 162 166 ! 4167 2019-08-16 11:01:48Z suehring 163 ! Changed behaviour of masked output over surface to follow terrain and ignore 167 ! Changed behaviour of masked output over surface to follow terrain and ignore 164 168 ! buildings (J.Resler, T.Gronemeier) 165 ! 169 ! 166 170 ! 4131 2019-08-02 11:06:18Z monakurppa 167 171 ! - Add "salsa_" before each salsa output variable … … 174 178 ! - Add the z-dimension for gaseous emissions to correspond the implementation 175 179 ! in the chemistry module 176 ! 180 ! 177 181 ! 4118 2019-07-25 16:11:45Z suehring 178 182 ! - When Dirichlet condition is applied in decycling, the boundary conditions are … … 189 193 ! This is done to overcome high concentration peaks due to stationary numerical 190 194 ! oscillations caused by horizontal advection discretization. 191 ! 195 ! 192 196 ! 4117 2019-07-25 08:54:02Z monakurppa 193 ! Pass integer flag array as well as boundary flags to WS scalar advection 197 ! Pass integer flag array as well as boundary flags to WS scalar advection 194 198 ! routine 195 ! 199 ! 196 200 ! 4109 2019-07-22 17:00:34Z suehring 197 ! Slightly revise setting of boundary conditions at horizontal walls, use 201 ! Slightly revise setting of boundary conditions at horizontal walls, use 198 202 ! data-structure offset index instead of pre-calculate it for each facing 199 ! 203 ! 200 204 ! 4079 2019-07-09 18:04:41Z suehring 201 ! Application of monotonic flux limiter for the vertical scalar advection 202 ! up to the topography top (only for the cache-optimized version at the 205 ! Application of monotonic flux limiter for the vertical scalar advection 206 ! up to the topography top (only for the cache-optimized version at the 203 207 ! moment). 204 ! 208 ! 205 209 ! 4069 2019-07-01 14:05:51Z Giersch 206 ! Masked output running index mid has been introduced as a local variable to 210 ! Masked output running index mid has been introduced as a local variable to 207 211 ! avoid runtime error (Loop variable has been modified) in time_integration 208 ! 212 ! 209 213 ! 4058 2019-06-27 15:25:42Z knoop 210 214 ! Bugfix: to_be_resorted was uninitialized in case of s_H2O in 3d_data_averaging 211 ! 215 ! 212 216 ! 4012 2019-05-31 15:19:05Z monakurppa 213 217 ! Merge salsa branch to trunk. List of changes: … … 221 225 ! - stuff from salsa_util_mod.f90 moved into salsa_mod.f90 222 226 ! - calls for closing the netcdf input files added 223 ! 227 ! 224 228 ! 3956 2019-05-07 12:32:52Z monakurppa 225 229 ! - Conceptual bug in depo_surf correct for urban and land surface model … … 229 233 ! salsa_exchange_horiz_bounds after calling salsa_driver only when needed 230 234 ! (i.e. every dt_salsa). 231 ! 235 ! 232 236 ! 3924 2019-04-23 09:33:06Z monakurppa 233 237 ! Correct a bug introduced by the previous update. 234 ! 238 ! 235 239 ! 3899 2019-04-16 14:05:27Z monakurppa 236 240 ! - remove unnecessary error / location messages … … 239 243 ! 240 244 ! 3885 2019-04-11 11:29:34Z kanani 241 ! Changes related to global restructuring of location messages and introduction 245 ! Changes related to global restructuring of location messages and introduction 242 246 ! of additional debug messages 243 ! 247 ! 244 248 ! 3876 2019-04-08 18:41:49Z knoop 245 249 ! Introduced salsa_actions module interface 246 ! 250 ! 247 251 ! 3871 2019-04-08 14:38:39Z knoop 248 252 ! Major changes in formatting, performance and data input structure (see branch … … 255 259 ! surface_aerosol_flux, aerosol_flux_dpg/sigmag/mass_fracs_a/mass_fracs_b. 256 260 ! - All emissions are now implemented as surface fluxes! No 3D sources anymore. 257 ! - Update the emission information by calling salsa_emission_update if 261 ! - Update the emission information by calling salsa_emission_update if 258 262 ! skip_time_do_salsa >= time_since_reference_point and 259 263 ! next_aero_emission_update <= time_since_reference_point … … 280 284 ! - Removed tailing white spaces and unused variables 281 285 ! - Change error message to start by PA instead of SA 282 ! 286 ! 283 287 ! 3833 2019-03-28 15:04:04Z forkel 284 ! added USE chem_gasphase_mod for nvar, nspec and spc_names 285 ! 288 ! added USE chem_gasphase_mod for nvar, nspec and spc_names 289 ! 286 290 ! 3787 2019-03-07 08:43:54Z raasch 287 291 ! unused variables removed 288 ! 292 ! 289 293 ! 3780 2019-03-05 11:19:45Z forkel 290 294 ! unused variable for file index removed from rrd-subroutines parameter list 291 ! 295 ! 292 296 ! 3685 2019-01-21 01:02:11Z knoop 293 297 ! Some interface calls moved to module_interface + cleanup 294 ! 298 ! 295 299 ! 3655 2019-01-07 16:51:22Z knoop 296 300 ! Implementation of the PALM module interface … … 438 442 (/0.0, 0.056, 0.0, 0.056, 0.056, 0.042, 0.056, -99., 0.042,0.014,0.056, -99., -99., -99., 0.056/) 439 443 ! 440 !-- Constants for the dry deposition model by Zhang et al. (2001): 441 !-- empirical constants "alpha" and "gamma" and characteristic radius "A" for 444 !-- Constants for the dry deposition model by Zhang et al. (2001): 445 !-- empirical constants "alpha" and "gamma" and characteristic radius "A" for 442 446 !-- each land use category (15) and season (5) 443 447 REAL(wp), DIMENSION(1:15), PARAMETER :: alpha_z01 = & … … 445 449 REAL(wp), DIMENSION(1:15), PARAMETER :: gamma_z01 = & 446 450 (/0.56, 0.58, 0.56, 0.56, 0.56, 0.54, 0.54, 0.54, 0.54, 0.54, 0.54, 0.54, 0.50, 0.50, 0.56/) 447 REAL(wp), DIMENSION(1:15,1:5), PARAMETER :: A_z01 = RESHAPE( (/& 451 REAL(wp), DIMENSION(1:15,1:5), PARAMETER :: A_z01 = RESHAPE( (/& 448 452 2.0, 5.0, 2.0, 5.0, 5.0, 2.0, 2.0, -99., -99., 10.0, 10.0, -99., -99., -99., 10.0,& ! SC1 449 453 2.0, 5.0, 2.0, 5.0, 5.0, 2.0, 2.0, -99., -99., 10.0, 10.0, -99., -99., -99., 10.0,& ! SC2 … … 1113 1117 CONTAINS 1114 1118 1115 !------------------- -----------------------------------------------------------!1119 !------------------- -----------------------------------------------------------------------------! 1116 1120 ! Description: 1117 1121 ! ------------ 1118 1122 !> Parin for &salsa_par for new modules 1119 !--------------------- ---------------------------------------------------------!1123 !--------------------- ---------------------------------------------------------! 1120 1124 SUBROUTINE salsa_parin 1121 1125 … … 1125 1129 IMPLICIT NONE 1126 1130 1127 CHARACTER(LEN= 80) :: line !< dummy string that contains the current line of parameter file1131 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of parameter file 1128 1132 1129 1133 INTEGER(iwp) :: i !< loop index 1134 INTEGER(iwp) :: io_status !< status after reading the namelist file 1130 1135 INTEGER(iwp) :: max_pr_salsa_tmp !< dummy variable 1131 1136 1132 NAMELIST /salsa_parameters/ aerosol_flux_dpg, &1133 aerosol_flux_mass_fracs_a, &1134 aerosol_flux_mass_fracs_b, &1135 aerosol_flux_sigmag, &1136 advect_particle_water, &1137 bc_aer_b, &1138 bc_aer_l, &1139 bc_aer_n, &1140 bc_aer_r, &1141 bc_aer_s, &1142 bc_aer_t, &1143 depo_pcm_par, &1144 depo_pcm_type, &1145 depo_surf_par, &1146 dpg, &1147 dt_salsa, &1148 emiss_factor_main, &1149 emiss_factor_side, &1150 feedback_to_palm, &1151 h2so4_init, &1152 hno3_init, &1153 listspec, &1154 main_street_id, &1155 mass_fracs_a, &1156 mass_fracs_b, &1157 max_street_id, &1158 n_lognorm, &1159 nbin, &1160 nesting_salsa, &1161 nesting_offline_salsa, &1162 nf2a, &1163 nh3_init, &1164 nj3, &1165 nlcnd, &1166 nlcndgas, &1167 nlcndh2oae, &1168 nlcoag, &1169 nldepo, &1170 nldepo_pcm, &1171 nldepo_surf, &1172 nldistupdate, &1173 nsnucl, &1174 ocnv_init, &1175 ocsv_init, &1176 reglim, &1177 salsa, &1178 salsa_emission_mode, &1179 season_z01, &1180 sigmag, &1181 side_street_id, &1182 skip_time_do_salsa, &1183 surface_aerosol_flux, &1137 NAMELIST /salsa_parameters/ aerosol_flux_dpg, & 1138 aerosol_flux_mass_fracs_a, & 1139 aerosol_flux_mass_fracs_b, & 1140 aerosol_flux_sigmag, & 1141 advect_particle_water, & 1142 bc_aer_b, & 1143 bc_aer_l, & 1144 bc_aer_n, & 1145 bc_aer_r, & 1146 bc_aer_s, & 1147 bc_aer_t, & 1148 depo_pcm_par, & 1149 depo_pcm_type, & 1150 depo_surf_par, & 1151 dpg, & 1152 dt_salsa, & 1153 emiss_factor_main, & 1154 emiss_factor_side, & 1155 feedback_to_palm, & 1156 h2so4_init, & 1157 hno3_init, & 1158 listspec, & 1159 main_street_id, & 1160 mass_fracs_a, & 1161 mass_fracs_b, & 1162 max_street_id, & 1163 n_lognorm, & 1164 nbin, & 1165 nesting_salsa, & 1166 nesting_offline_salsa, & 1167 nf2a, & 1168 nh3_init, & 1169 nj3, & 1170 nlcnd, & 1171 nlcndgas, & 1172 nlcndh2oae, & 1173 nlcoag, & 1174 nldepo, & 1175 nldepo_pcm, & 1176 nldepo_surf, & 1177 nldistupdate, & 1178 nsnucl, & 1179 ocnv_init, & 1180 ocsv_init, & 1181 reglim, & 1182 salsa, & 1183 salsa_emission_mode, & 1184 season_z01, & 1185 sigmag, & 1186 side_street_id, & 1187 skip_time_do_salsa, & 1188 surface_aerosol_flux, & 1184 1189 van_der_waals_coagc 1185 1190 1186 line = ' ' 1187 ! 1188 !-- Try to find salsa package 1189 REWIND ( 11 ) 1190 line = ' ' 1191 DO WHILE ( INDEX( line, '&salsa_parameters' ) == 0 ) 1192 READ ( 11, '(A)', END=10 ) line 1193 ENDDO 1194 BACKSPACE ( 11 ) 1195 ! 1196 !-- Read user-defined namelist 1197 READ ( 11, salsa_parameters ) 1198 ! 1199 !-- Enable salsa (salsa switch in modules.f90) 1200 salsa = .TRUE. 1201 1202 10 CONTINUE 1191 1192 ! 1193 !-- Move to the beginning of the namelist file and try to find and read the namelist. 1194 REWIND( 11 ) 1195 READ( 11, salsa_parameters, IOSTAT=io_status ) 1196 1197 ! 1198 !-- Action depending on the READ status 1199 IF ( io_status == 0 ) THEN 1200 ! 1201 !-- salsa_parameters namelist was found and read correctly. Enable salsa (salsa switch in 1202 !-- modules.f90) 1203 salsa = .TRUE. 1204 1205 ELSEIF ( io_status > 0 ) THEN 1206 ! 1207 !-- salsa_parameters namelist was found but contained errors. Print an error message including 1208 !-- the line that caused the problem. 1209 BACKSPACE( 11 ) 1210 READ( 11 , '(A)' ) line 1211 CALL parin_fail_message( 'salsa_parameters', line ) 1212 1213 ENDIF 1214 1203 1215 ! 1204 1216 !-- Update the number of output profiles … … 1212 1224 1213 1225 END SUBROUTINE salsa_parin 1226 1214 1227 1215 1228 !------------------------------------------------------------------------------! … … 1445 1458 1446 1459 IMPLICIT NONE 1447 1460 1448 1461 INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file 1449 1462 ! … … 1748 1761 !-- (number concentration (#/m3) ) 1749 1762 ! 1750 !-- If chemistry is on, read gas phase concentrations from there. Otherwise, 1763 !-- If chemistry is on, read gas phase concentrations from there. Otherwise, 1751 1764 !-- allocate salsa_gas array. 1752 1765 … … 1822 1835 ENDDO 1823 1836 ! 1824 !-- Vertical surfaces: northward (l=0), southward (l=1), eastward (l=2) and 1837 !-- Vertical surfaces: northward (l=0), southward (l=1), eastward (l=2) and 1825 1838 !-- westward (l=3) facing 1826 1839 DO l = 0, 3 … … 1999 2012 ! Description: 2000 2013 ! ------------ 2001 !> Initializes particle size distribution grid by calculating size bin limits 2002 !> and mid-size for *dry* particles in each bin. Called from salsa_initialize 2014 !> Initializes particle size distribution grid by calculating size bin limits 2015 !> and mid-size for *dry* particles in each bin. Called from salsa_initialize 2003 2016 !> (only at the beginning of simulation). 2004 2017 !> Size distribution described using: … … 2009 2022 !> based on given subrange size limits and bin number. 2010 2023 ! 2011 !> Mona changed 06/2017: Use geometric mean diameter to describe the mean 2024 !> Mona changed 06/2017: Use geometric mean diameter to describe the mean 2012 2025 !> particle diameter in a size bin, not the arithmeric mean which clearly 2013 !> overestimates the total particle volume concentration. 2026 !> overestimates the total particle volume concentration. 2014 2027 ! 2015 2028 !> Coded by: … … 2089 2102 !> Initilize altitude-dependent aerosol size distributions and compositions. 2090 2103 !> 2091 !> Mona added 06/2017: Correct the number and mass concentrations by normalizing 2104 !> Mona added 06/2017: Correct the number and mass concentrations by normalizing 2092 2105 !< by the given total number and mass concentration. 2093 2106 !> … … 2268 2281 CALL get_variable( id_dyn, 'Dmid', pr_dmid ) 2269 2282 ! 2270 !-- Check whether the sectional representation conform to the one 2283 !-- Check whether the sectional representation conform to the one 2271 2284 !-- applied in the model 2272 2285 IF ( ANY( ABS( ( aero(1:nbins_aerosol)%dmid - pr_dmid ) / & … … 2323 2336 message_string = 'Error in initialising mass fractions of chemical components. ' // & 2324 2337 'Check that all chemical components are included in parameter file!' 2325 CALL message( 'salsa_mod: aerosol_init', 'PA0606', 2, 2, 0, 6, 0 ) 2338 CALL message( 'salsa_mod: aerosol_init', 'PA0606', 2, 2, 0, 6, 0 ) 2326 2339 ENDIF 2327 2340 ! … … 2550 2563 ENDIF 2551 2564 ib = ib+1 2552 ENDDO 2565 ENDDO 2553 2566 ENDIF 2554 2567 ENDDO !< k … … 2593 2606 ! Description: 2594 2607 ! ------------ 2595 !> Create a lognormal size distribution and discretise to a sectional 2608 !> Create a lognormal size distribution and discretise to a sectional 2596 2609 !> representation. 2597 2610 !------------------------------------------------------------------------------! … … 2687 2700 ! 2688 2701 !-- Predetermine flag to mask topography 2689 flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) ) 2702 flag = MERGE( 1.0_wp, 0.0_wp, BTEST( wall_flags_total_0(k,j,i), 0 ) ) 2690 2703 ! 2691 2704 !-- Regime 2a: … … 2717 2730 IF ( prunmode == 1 ) THEN 2718 2731 aerosol_mass(ic)%init(k) = MAX( 0.0_wp, pmf2b(k) ) * ( 1.0_wp - pnf2a(k) ) * & 2719 pndist(k,ib) * pcore(ib) * prho 2732 pndist(k,ib) * pcore(ib) * prho 2720 2733 ENDIF 2721 2734 ib = ib + 1 … … 3630 3643 ! Description: 3631 3644 ! ------------ 3632 !> Performs necessary unit and dimension conversion between the host model and 3645 !> Performs necessary unit and dimension conversion between the host model and 3633 3646 !> SALSA module, and calls the main SALSA routine. 3634 3647 !> Partially adobted form the original SALSA boxmodel version. 3635 3648 !> Now takes masses in as kg/kg from LES!! Converted to m3/m3 for SALSA 3636 !> 05/2016 Juha: This routine is still pretty much in its original shape. 3649 !> 05/2016 Juha: This routine is still pretty much in its original shape. 3637 3650 !> It's dumb as a mule and twice as ugly, so implementation of 3638 3651 !> an improved solution is necessary sooner or later. … … 3752 3765 ! 3753 3766 !-- Set volume concentrations: 3754 !-- Sulphate (SO4) or sulphuric acid H2SO4 3767 !-- Sulphate (SO4) or sulphuric acid H2SO4 3755 3768 IF ( index_so4 > 0 ) THEN 3756 3769 vc = 1 … … 3820 3833 IF ( index_no > 0 ) THEN 3821 3834 vc = 6 3822 str = ( index_no-1 ) * nbins_aerosol + 1 3835 str = ( index_no-1 ) * nbins_aerosol + 1 3823 3836 endi = index_no * nbins_aerosol 3824 3837 ic = 1 … … 3859 3872 aero_old(1:nbins_aerosol)%volc(vc) = lo_aero(1:nbins_aerosol)%volc(vc) 3860 3873 ! 3861 !-- Number concentrations (numc) and particle sizes 3874 !-- Number concentrations (numc) and particle sizes 3862 3875 !-- (dwet = wet diameter, core = dry volume) 3863 3876 DO ib = 1, nbins_aerosol … … 4114 4127 ! 4115 4128 !-- Set surfaces and wall fluxes due to deposition 4116 IF ( lsdepo .AND. lsdepo_surf .AND. prunmode == 3 ) THEN 4129 IF ( lsdepo .AND. lsdepo_surf .AND. prunmode == 3 ) THEN 4117 4130 IF ( .NOT. land_surface .AND. .NOT. urban_surface ) THEN 4118 4131 CALL depo_surf( i, j, surf_def_h(0), vd, schmidt_num, kvis, in_u, .TRUE. ) … … 4189 4202 4190 4203 END SUBROUTINE set_salsa_runtime 4191 4204 4192 4205 !------------------------------------------------------------------------------! 4193 4206 ! Description: 4194 4207 ! ------------ 4195 !> Calculates the absolute temperature (using hydrostatic pressure), saturation 4196 !> vapour pressure and mixing ratio over water, relative humidity and air 4208 !> Calculates the absolute temperature (using hydrostatic pressure), saturation 4209 !> vapour pressure and mixing ratio over water, relative humidity and air 4197 4210 !> density needed in the SALSA model. 4198 !> NOTE, no saturation adjustment takes place -> the resulting water vapour 4211 !> NOTE, no saturation adjustment takes place -> the resulting water vapour 4199 4212 !> mixing ratio can be supersaturated, allowing the microphysical calculations 4200 4213 !> in SALSA. … … 4254 4267 ! Description: 4255 4268 ! ------------ 4256 !> Calculates ambient sizes of particles by equilibrating soluble fraction of 4269 !> Calculates ambient sizes of particles by equilibrating soluble fraction of 4257 4270 !> particles with water using the ZSR method (Stokes and Robinson, 1966). 4258 4271 !> Method: … … 4260 4273 !> - (ammonium) sulphate (100%) 4261 4274 !> - sea salt (100 %) 4262 !> - organic carbon (epsoc * 100%) 4275 !> - organic carbon (epsoc * 100%) 4263 4276 !> Exact thermodynamic considerations neglected. 4264 !> - If particles contain no sea salt, calculation according to sulphate 4277 !> - If particles contain no sea salt, calculation according to sulphate 4265 4278 !> properties 4266 !> - If contain sea salt but no sulphate, calculation according to sea salt 4279 !> - If contain sea salt but no sulphate, calculation according to sea salt 4267 4280 !> properties 4268 !> - If contain both sulphate and sea salt -> the molar fraction of these 4281 !> - If contain both sulphate and sea salt -> the molar fraction of these 4269 4282 !> compounds determines which one of them is used as the basis of calculation. 4270 !> If sulphate and sea salt coexist in a particle, it is assumed that the Cl is 4271 !> replaced by sulphate; thus only either sulphate + organics or sea salt + 4283 !> If sulphate and sea salt coexist in a particle, it is assumed that the Cl is 4284 !> replaced by sulphate; thus only either sulphate + organics or sea salt + 4272 4285 !> organics is included in the calculation of soluble fraction. 4273 !> Molality parameterizations taken from Table 1 of Tang: Thermodynamic and 4274 !> optical properties of mixed-salt aerosols of atmospheric importance, 4286 !> Molality parameterizations taken from Table 1 of Tang: Thermodynamic and 4287 !> optical properties of mixed-salt aerosols of atmospheric importance, 4275 4288 !> J. Geophys. Res., 102 (D2), 1883-1893 (1997) 4276 4289 ! 4277 4290 !> Coded by: 4278 !> Hannele Korhonen (FMI) 2005 4291 !> Hannele Korhonen (FMI) 2005 4279 4292 !> Harri Kokkola (FMI) 2006 4280 4293 !> Matti Niskanen(FMI) 2012 … … 4282 4295 !> Modified for the new aerosol datatype, Juha Tonttila (FMI) 2014 4283 4296 ! 4284 !> fxm: should sea salt form a solid particle when prh is very low (even though 4297 !> fxm: should sea salt form a solid particle when prh is very low (even though 4285 4298 !> it could be mixed with e.g. sulphate)? 4286 4299 !> fxm: crashes if no sulphate or sea salt … … 4335 4348 zvpart(6:7) = paero(ib)%volc(6:7) / paero(ib)%numc 4336 4349 ! 4337 !-- Total volume and wet diameter of one dry particle 4350 !-- Total volume and wet diameter of one dry particle 4338 4351 zcore = SUM( zvpart(1:2) ) 4339 4352 zdwet = paero(ib)%dwet … … 4345 4358 zaw = MAX( 1.0E-3_wp, zrh / zke ) ! To avoid underflow 4346 4359 ! 4347 !-- Binary molalities (mol/kg): 4360 !-- Binary molalities (mol/kg): 4348 4361 !-- Sulphate 4349 4362 zbinmol(1) = 1.1065495E+2_wp - 3.6759197E+2_wp * zaw + 5.0462934E+2_wp * zaw**2 - & … … 4367 4380 zcore / api6 )**0.33333333_wp 4368 4381 ! 4369 !-- Kelvin effect (Eq. 10.85 in in Seinfeld and Pandis (2006)). Avoid 4382 !-- Kelvin effect (Eq. 10.85 in in Seinfeld and Pandis (2006)). Avoid 4370 4383 !-- overflow. 4371 4384 zke = EXP( MIN( 50.0_wp, 4.0_wp * surfw0 * amvh2so4 / ( abo * ptemp * zdwet ) ) ) 4372 4385 4373 4386 counti = counti + 1 4374 IF ( counti > 1000 ) THEN 4387 IF ( counti > 1000 ) THEN 4375 4388 message_string = 'Subrange 1: no convergence!' 4376 4389 CALL message( 'salsa_mod: equilibration', 'PA0617', 1, 2, 0, 6, 0 ) … … 4378 4391 ENDDO 4379 4392 ! 4380 !-- Instead of lwc, use the volume concentration of water from now on 4393 !-- Instead of lwc, use the volume concentration of water from now on 4381 4394 !-- (easy to convert...) 4382 4395 paero(ib)%volc(8) = zlwc / arhoh2o … … 4438 4451 6.210577919E+1_wp * zaw**2 + 5.510176187E+2_wp * zaw**3 - & 4439 4452 1.460055286E+3_wp * zaw**4 + 1.894467542E+3_wp * zaw**5 - & 4440 1.220611402E+3_wp * zaw**6 + 3.098597737E+2_wp * zaw**7 4453 1.220611402E+3_wp * zaw**6 + 3.098597737E+2_wp * zaw**7 4441 4454 !-- Sea salt (natrium chloride) 4442 4455 zbinmol(5) = 5.875248E+1_wp - 1.8781997E+2_wp * zaw + 2.7211377E+2_wp * zaw**2 - & … … 4457 4470 4458 4471 counti = counti + 1 4459 IF ( counti > 1000 ) THEN 4472 IF ( counti > 1000 ) THEN 4460 4473 message_string = 'Subrange 2: no convergence!' 4461 4474 CALL message( 'salsa_mod: equilibration', 'PA0618', 1, 2, 0, 6, 0 ) … … 4482 4495 !> Description: 4483 4496 !> ------------ 4484 !> Calculation of the settling velocity vc (m/s) per aerosol size bin and 4497 !> Calculation of the settling velocity vc (m/s) per aerosol size bin and 4485 4498 !> deposition on plant canopy (lsdepo_pcm). 4486 4499 ! … … 4750 4763 !> Calculate the dry deposition on horizontal and vertical surfaces. Implement 4751 4764 !> as a surface flux. 4752 !> @todo aerodynamic resistance ignored for now (not important for 4765 !> @todo aerodynamic resistance ignored for now (not important for 4753 4766 ! high-resolution simulations) 4754 4767 !------------------------------------------------------------------------------! … … 5010 5023 ! ------------ 5011 5024 !> Calculates particle loss and change in size distribution due to (Brownian) 5012 !> coagulation. Only for particles with dwet < 30 micrometres. 5025 !> coagulation. Only for particles with dwet < 30 micrometres. 5013 5026 ! 5014 5027 !> Method: 5015 5028 !> Semi-implicit, non-iterative method: (Jacobson, 1994) 5016 5029 !> Volume concentrations of the smaller colliding particles added to the bin of 5017 !> the larger colliding particles. Start from first bin and use the updated 5030 !> the larger colliding particles. Start from first bin and use the updated 5018 5031 !> number and volume for calculation of following bins. NB! Our bin numbering 5019 5032 !> does not follow particle size in subrange 2. … … 5028 5041 !> Exact coagulation coefficients for each pressure level are scaled according 5029 5042 !> to current particle wet size (linear scaling). 5030 !> Bins are organized in terms of the dry size of the condensation nucleus, 5043 !> Bins are organized in terms of the dry size of the condensation nucleus, 5031 5044 !> while coagulation kernell is calculated with the actual hydrometeor 5032 5045 !> size. … … 5078 5091 !-- CoagSink ~ Dp in continuum subrange --> 'effective' number conc. of coarse particles 5079 5092 5080 !-- 2) Updating coagulation coefficients 5093 !-- 2) Updating coagulation coefficients 5081 5094 ! 5082 5095 !-- Aerosol mass (kg). Density of 1500 kg/m3 assumed … … 5268 5281 mfp = ( 1.656E-10_wp * temp + 1.828E-8_wp ) * ( p_0 + 1325.0_wp ) / pres 5269 5282 ! 5270 !-- 2) Slip correction factor for small particles 5283 !-- 2) Slip correction factor for small particles 5271 5284 knud = 2.0_wp * EXP( LOG(mfp) - LOG(diam) )! Knudsen number for air (15.23) 5272 5285 ! … … 5325 5338 ! Description: 5326 5339 ! ------------ 5327 !> Calculates the change in particle volume and gas phase 5340 !> Calculates the change in particle volume and gas phase 5328 5341 !> concentrations due to nucleation, condensation and dissolutional growth. 5329 5342 ! 5330 5343 !> Sulphuric acid and organic vapour: only condensation and no evaporation. 5331 5344 ! 5332 !> New gas and aerosol phase concentrations calculated according to Jacobson 5345 !> New gas and aerosol phase concentrations calculated according to Jacobson 5333 5346 !> (1997): Numerical techniques to solve condensational and dissolutional growth 5334 5347 !> equations when growth is coupled to reversible reactions, Aerosol Sci. Tech., … … 5336 5349 ! 5337 5350 !> Following parameterization has been used: 5338 !> Molecular diffusion coefficient of condensing vapour (m2/s) 5351 !> Molecular diffusion coefficient of condensing vapour (m2/s) 5339 5352 !> (Reid et al. (1987): Properties of gases and liquids, McGraw-Hill, New York.) 5340 5353 !> D = {1.d-7*sqrt(1/M_air + 1/M_gas)*T^1.75} / & … … 5343 5356 !> d_air = 19.70 : diffusion volume of air 5344 5357 !> M_h2so4 = 98.08 : molar mass of h2so4 (g/mol) 5345 !> d_h2so4 = 51.96 : diffusion volume of h2so4 5358 !> d_h2so4 = 51.96 : diffusion volume of h2so4 5346 5359 ! 5347 5360 !> Called from main aerosol model … … 5447 5460 zknud(ss:ee) = 2.0_wp * zmfp / paero(ss:ee)%dwet 5448 5461 ! 5449 !-- Transitional correction factor: aerosol + gas (the semi-empirical Fuchs- Sutugin 5462 !-- Transitional correction factor: aerosol + gas (the semi-empirical Fuchs- Sutugin 5450 5463 !-- interpolation function (Fuchs and Sutugin, 1971)) 5451 5464 zbeta = ( zknud + 1.0_wp ) / ( 0.377_wp * zknud + 1.0_wp + 4.0_wp / ( 3.0_wp * massacc ) * & … … 5459 5472 * paero(start_subrange_1a:start_subrange_1a+1)%dwet) 5460 5473 ! 5461 !-- Collision rate (mass-transfer coefficient): gases on aerosols (1/s) (Eq. 16.64 in 5474 !-- Collision rate (mass-transfer coefficient): gases on aerosols (1/s) (Eq. 16.64 in 5462 5475 !-- Jacobson (2005)) 5463 5476 ss = start_subrange_1a … … 5475 5488 !-- 5) Changes in gas-phase concentrations and particle volume 5476 5489 ! 5477 !-- 5.1) Organic vapours 5490 !-- 5.1) Organic vapours 5478 5491 ! 5479 5492 !-- 5.1.1) Non-volatile organic compound: condenses onto all bins … … 5527 5540 ! 5528 5541 !-- Change in gas concentration (#/m3) 5529 zdvap3 = pcocsv - zcvap_new3 5542 zdvap3 = pcocsv - zcvap_new3 5530 5543 ! 5531 5544 !-- Updated gas concentration (#/m3) … … 5590 5603 ! 5591 5604 !-- Condensation of water vapour 5592 IF ( lscndh2oae ) THEN 5605 IF ( lscndh2oae ) THEN 5593 5606 CALL gpparth2o( paero, ptemp, ppres, pcs, pcw, ptstep ) 5594 5607 ENDIF … … 5600 5613 ! ------------ 5601 5614 !> Calculates the particle number and volume increase, and gas-phase 5602 !> concentration decrease due to nucleation subsequent growth to detectable size 5615 !> concentration decrease due to nucleation subsequent growth to detectable size 5603 5616 !> of 3 nm. 5604 5617 ! … … 5659 5672 REAL(wp) :: zdelta_vap !< change of H2SO4 and organic vapour concentration (#/m3) 5660 5673 REAL(wp) :: zdfvap !< air diffusion coefficient (m2/s) 5661 REAL(wp) :: zdmean !< mean diameter of existing particles (m) 5674 REAL(wp) :: zdmean !< mean diameter of existing particles (m) 5662 5675 REAL(wp) :: zeta !< constant: proportional to ratio of CS/GR (m) 5663 5676 !< (condensation sink / growth rate) … … 5674 5687 REAL(wp) :: zlambda !< parameter for adjusting the growth rate due to self-coagulation 5675 5688 REAL(wp) :: zm_c !< particle mass (kg) for c = critical (1nm) 5676 REAL(wp) :: zm_para !< Parameter m for calculating the coagulation sink (Eq. 5&6 in 5689 REAL(wp) :: zm_para !< Parameter m for calculating the coagulation sink (Eq. 5&6 in 5677 5690 !< Lehtinen et al. 2007) 5678 5691 REAL(wp) :: zm_x !< particle mass (kg) for x = 3nm … … 5684 5697 REAL(wp) :: znsa !< number of H2SO4 molecules in critical cluster 5685 5698 5686 REAL(wp), INTENT(in) :: pc_nh3 !< ammonia concentration (#/m3) 5699 REAL(wp), INTENT(in) :: pc_nh3 !< ammonia concentration (#/m3) 5687 5700 REAL(wp), INTENT(in) :: pc_ocnv !< conc. of non-volatile OC (#/m3) 5688 5701 REAL(wp), INTENT(in) :: pc_sa !< sulphuric acid conc. (#/m3) … … 5812 5825 znsa = 1.0_wp 5813 5826 ! 5814 !-- Heteromolecular nucleation, J~[H2SO4]*[ORG] 5827 !-- Heteromolecular nucleation, J~[H2SO4]*[ORG] 5815 5828 !-- (See Paasonen et al. (2010), Atmos. Chem. Phys., 10, 11223-11242.) 5816 5829 CASE(7) … … 5864 5877 ! 5865 5878 !-- 2.1) Check that there is enough H2SO4 and organic vapour to produce the nucleation 5866 IF ( nsnucl <= 4 ) THEN 5879 IF ( nsnucl <= 4 ) THEN 5867 5880 ! 5868 5881 !-- If the chosen nucleation scheme is 1-4, nucleation occurs only due to H2SO4. All of the total … … 5881 5894 pxocnv = 0.0_wp 5882 5895 ELSE 5883 pxsa = pc_sa * znsa / ( pc_sa * znsa + pc_ocnv * znoc ) 5896 pxsa = pc_sa * znsa / ( pc_sa * znsa + pc_ocnv * znoc ) 5884 5897 pxocnv = pc_ocnv * znoc / ( pc_sa * znsa + pc_ocnv * znoc ) 5885 5898 ENDIF … … 6009 6022 ( 3.0_wp * z_r_c2 * zgamma_f_2 ) - z_r_c2 6010 6023 zomega_2x = ( ( z_r_x2 + zgamma_f_2 )**3 - ( z_r_x2**2 + zgamma_f_2 )**1.5_wp ) / & 6011 ( 3.0_wp * z_r_x2 * zgamma_f_2 ) - z_r_x2 6024 ( 3.0_wp * z_r_x2 * zgamma_f_2 ) - z_r_x2 6012 6025 ! 6013 6026 !-- The distance (m) at which the two fluxes are matched (condensation and coagulation sinks) … … 6025 6038 zcoags_x = MAX( 1.0E-20_wp, SUM( z_k_x2 * paero(:)%numc ) ) 6026 6039 ! 6027 !-- Parameter m for calculating the coagulation sink onto background particles (Eq. 5&6 in 6040 !-- Parameter m for calculating the coagulation sink onto background particles (Eq. 5&6 in 6028 6041 !-- Lehtinen et al. 2007) 6029 6042 zm_para = LOG( zcoags_x / zcoags_c ) / LOG( reglim(1) / zdcrit ) … … 6041 6054 ELSEIF ( nj3 == 3 ) THEN ! Anttila et al. (2010): coagulation sink and self-coag. 6042 6055 ! 6043 !-- If air is polluted, the self-coagulation becomes important. Self-coagulation of small 6056 !-- If air is polluted, the self-coagulation becomes important. Self-coagulation of small 6044 6057 !-- particles < 3 nm. 6045 6058 ! … … 6198 6211 ! 6199 6212 !-- Nucleation rate in #/(cm3 s) 6200 pnuc_rate = EXP( pnuc_rate ) 6213 pnuc_rate = EXP( pnuc_rate ) 6201 6214 ! 6202 6215 !-- Check the validity of parameterization 6203 IF ( pnuc_rate < 1.0E-7_wp ) THEN 6216 IF ( pnuc_rate < 1.0E-7_wp ) THEN 6204 6217 pnuc_rate = 0.0_wp 6205 6218 pd_crit = 1.0E-9_wp … … 6252 6265 ! 6253 6266 !-- 6) Organic compounds not involved when binary nucleation is assumed 6254 pn_crit_ocnv = 0.0_wp ! number of organic molecules 6267 pn_crit_ocnv = 0.0_wp ! number of organic molecules 6255 6268 pk_sa = 1.0_wp ! if = 1, H2SO4 involved in nucleation 6256 6269 pk_ocnv = 0.0_wp ! if = 1, organic compounds involved … … 6299 6312 6300 6313 END SUBROUTINE binnucl 6301 6314 6302 6315 !------------------------------------------------------------------------------! 6303 6316 ! Description: … … 6353 6366 zlogsa = LOG( pc_sa ) 6354 6367 ! 6355 !-- 2) Nucleation rate (Eq. 7 in Napari et al., 2002: Parameterization of 6368 !-- 2) Nucleation rate (Eq. 7 in Napari et al., 2002: Parameterization of 6356 6369 !-- ternary nucleation of sulfuric acid - ammonia - water. 6357 6370 zlnj = - 84.7551114741543_wp + 0.3117595133628944_wp * prh + & … … 6461 6474 ! Description: 6462 6475 ! ------------ 6463 !> Function z_n_nuc_tayl is connected to the calculation of self-coagualtion of 6476 !> Function z_n_nuc_tayl is connected to the calculation of self-coagualtion of 6464 6477 !> small particles. It calculates number of the particles in the size range 6465 !> [zdcrit,dx] using Taylor-expansion (please note that the expansion is not 6478 !> [zdcrit,dx] using Taylor-expansion (please note that the expansion is not 6466 6479 !> valid for certain rational numbers, e.g. -4/3 and -3/2) 6467 6480 !------------------------------------------------------------------------------! … … 6506 6519 ! Description: 6507 6520 ! ------------ 6508 !> Calculates the condensation of water vapour on aerosol particles. Follows the 6521 !> Calculates the condensation of water vapour on aerosol particles. Follows the 6509 6522 !> analytical predictor method by Jacobson (2005). 6510 !> For equations, see Jacobson (2005), Fundamentals of atmospheric modelling 6523 !> For equations, see Jacobson (2005), Fundamentals of atmospheric modelling 6511 6524 !> (2nd edition). 6512 6525 !------------------------------------------------------------------------------! … … 6690 6703 ! Description: 6691 6704 ! ------------ 6692 !> Calculates the activity coefficient of liquid water 6705 !> Calculates the activity coefficient of liquid water 6693 6706 !------------------------------------------------------------------------------! 6694 6707 REAL(wp) FUNCTION acth2o( ppart, pcw ) … … 6723 6736 ! Description: 6724 6737 ! ------------ 6725 !> Calculates the dissolutional growth of particles (i.e. gas transfers to a 6726 !> particle surface and dissolves in liquid water on the surface). Treated here 6727 !> as a non-equilibrium (time-dependent) process. Gases: HNO3 and NH3 6738 !> Calculates the dissolutional growth of particles (i.e. gas transfers to a 6739 !> particle surface and dissolves in liquid water on the surface). Treated here 6740 !> as a non-equilibrium (time-dependent) process. Gases: HNO3 and NH3 6728 6741 !> (Chapter 17.14 in Jacobson, 2005). 6729 6742 ! 6730 !> Called from subroutine condensation. 6743 !> Called from subroutine condensation. 6731 6744 !> Coded by: 6732 6745 !> Harri Kokkola (FMI) 6733 !------------------------------------------------------------------------------! 6746 !------------------------------------------------------------------------------! 6734 6747 SUBROUTINE gpparthno3( ppres, ptemp, paero, pghno3, pgnh3, pcw, pcs, pbeta, ptstep ) 6735 6748 … … 7270 7283 !< 1: HNO3, 2: HCL, 3: NH4+/H+ (NH3), 4: HHSO4**2/H2SO4, 7271 7284 !< 5: H2SO4**3/HHSO4**2, 6: NH4HSO2, 7: HHSO4 7272 REAL(wp), DIMENSION(:) :: ions !< ion molarities (mol/m3): 1: H+, 2: NH4+, 3: Na+, 7285 REAL(wp), DIMENSION(:) :: ions !< ion molarities (mol/m3): 1: H+, 2: NH4+, 3: Na+, 7273 7286 !< 4: SO4(2-), 5: HSO4-, 6: NO3-, 7: Cl- 7274 REAL(wp), DIMENSION(7) :: ions_mol !< ion molalities (mol/kg): 1: H+, 2: NH4+, 3: Na+, 7287 REAL(wp), DIMENSION(7) :: ions_mol !< ion molalities (mol/kg): 1: H+, 2: NH4+, 3: Na+, 7275 7288 !< 4: SO4(2-), 5: HSO4-, 6: NO3-, 7: Cl- 7276 REAL(wp), DIMENSION(:) :: mols_out !< ion molality output (mol/kg): 1: H+, 2: NH4+, 3: Na+, 7289 REAL(wp), DIMENSION(:) :: mols_out !< ion molality output (mol/kg): 1: H+, 2: NH4+, 3: Na+, 7277 7290 !< 4: SO4(2-), 5: HSO4-, 6: NO3-, 7: Cl- 7278 7291 ! … … 7560 7573 sodium_nitrate_eq_frac * nano3_h2so4 + sodium_chloride_eq_frac * nacl_h2so4 7561 7574 7562 gamma_h2so4 = EXP( ln_h2so4_act ) ! molal activity coefficient 7575 gamma_h2so4 = EXP( ln_h2so4_act ) ! molal activity coefficient 7563 7576 ! 7564 7577 !-- Export activity coefficients … … 7589 7602 ENDIF 7590 7603 ! 7591 !-- Calculate the new hydrogen ion, bisulphate ion and sulphate ion 7604 !-- Calculate the new hydrogen ion, bisulphate ion and sulphate ion 7592 7605 !-- concentration 7593 7606 h_real = ions(1) … … 7615 7628 !-- 4) ACTIVITY COEFFICIENTS -for vapour pressures of HNO3,HCL and NH3 7616 7629 ! 7617 !-- This section evaluates activity coefficients and vapour pressures using the water content 7630 !-- This section evaluates activity coefficients and vapour pressures using the water content 7618 7631 !-- calculated above) for each inorganic condensing species: a - HNO3, b - NH3, c - HCL. 7619 !-- The following procedure is used: Zaveri et al (2005) found that one could express the variation 7632 !-- The following procedure is used: Zaveri et al (2005) found that one could express the variation 7620 7633 !-- of activity coefficients linearly in log-space if equivalent mole fractions were used. 7621 7634 !-- So, by a taylor series expansion LOG( activity coefficient ) = … … 7927 7940 !> Update the particle size distribution. Put particles into corrects bins. 7928 7941 !> 7929 !> Moving-centre method assumed, i.e. particles are allowed to grow to their 7930 !> exact size as long as they are not crossing the fixed diameter bin limits. 7931 !> If the particles in a size bin cross the lower or upper diameter limit, they 7942 !> Moving-centre method assumed, i.e. particles are allowed to grow to their 7943 !> exact size as long as they are not crossing the fixed diameter bin limits. 7944 !> If the particles in a size bin cross the lower or upper diameter limit, they 7932 7945 !> are all moved to the adjacent diameter bin and their volume is averaged with 7933 !> the particles in the new bin, which then get a new diameter. 7934 ! 7935 !> Moving-centre method minimises numerical diffusion. 7946 !> the particles in the new bin, which then get a new diameter. 7947 ! 7948 !> Moving-centre method minimises numerical diffusion. 7936 7949 !------------------------------------------------------------------------------! 7937 7950 SUBROUTINE distr_update( paero ) … … 7996 8009 ! 7997 8010 !-- If size bin has not grown, cycle. 7998 !-- Changed by Mona: compare to the arithmetic mean volume, as done originally. Now 7999 !-- particle volume is derived from the geometric mean diameter, not arithmetic (see 8011 !-- Changed by Mona: compare to the arithmetic mean volume, as done originally. Now 8012 !-- particle volume is derived from the geometric mean diameter, not arithmetic (see 8000 8013 !-- SUBROUTINE set_sizebins). 8001 8014 IF ( zvpart <= api6 * ( ( aero(ib)%vhilim + aero(ib)%vlolim ) / ( 2.0_wp * api6 ) ) ) & … … 9537 9550 REAL(wp), DIMENSION(:), INTENT(out) :: mconc !< total dry or wet mass concentration 9538 9551 9539 !-- Number of components 9552 !-- Number of components 9540 9553 IF ( itype == 'dry' ) THEN 9541 iend = prtcl%ncomp - 1 9554 iend = prtcl%ncomp - 1 9542 9555 ELSE IF ( itype == 'wet' ) THEN 9543 9556 iend = prtcl%ncomp … … 10027 10040 message_string = 'end_time of the simulation exceeds the time dimension in ' // & 10028 10041 'the salsa input file.' 10029 CALL message( 'salsa_emission_setup', 'PA0692', 1, 2, 0, 6, 0 ) 10042 CALL message( 'salsa_emission_setup', 'PA0692', 1, 2, 0, 6, 0 ) 10030 10043 ENDIF 10031 10044 ! … … 10093 10106 inn = def_modes%cat_input_to_model(in) 10094 10107 ! 10095 !-- Calculate the number concentration (1/m3) of a log-normal size distribution 10108 !-- Calculate the number concentration (1/m3) of a log-normal size distribution 10096 10109 !-- following Jacobson (2005): Eq 13.25. 10097 10110 def_modes%ntot_table = 6.0_wp * def_modes%pm_frac_table(:,inn) / ( pi * & … … 10643 10656 MAX( time_since_reference_point, 0.0_wp ) ), DIM = 1 ) - 1 10644 10657 ! 10645 !-- Allocate the data input array always before reading in the data and deallocate after (NOTE 10658 !-- Allocate the data input array always before reading in the data and deallocate after (NOTE 10646 10659 !-- that "preprocessed" input data array is applied now here) 10647 10660 ALLOCATE( dum_var_5d(1,1,nys:nyn,nxl:nxr,1:chem_emission_att%n_emiss_species) ) … … 11762 11775 ! 11763 11776 !-- Diameter in micrometres 11764 mean_d = 1.0E+6_wp * ra_dry(k,j,i,ib) * 2.0_wp 11777 mean_d = 1.0E+6_wp * ra_dry(k,j,i,ib) * 2.0_wp 11765 11778 ! 11766 11779 !-- Deposition factor: alveolar … … 12112 12125 DO k = nzb_do, nzt_do 12113 12126 local_pf(i,j,k) = MERGE( nbins_av(k,j,i,ib), REAL( fill_value, KIND = wp ), & 12114 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12127 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12115 12128 ENDDO 12116 12129 ENDDO … … 12146 12159 DO k = nzb_do, nzt_do 12147 12160 local_pf(i,j,k) = MERGE( mbins_av(k,j,i,ib), REAL( fill_value, KIND = wp ), & 12148 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12161 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12149 12162 ENDDO 12150 12163 ENDDO … … 12225 12238 DO k = nzb_do, nzt_do 12226 12239 local_pf(i,j,k) = MERGE( ldsa_av(k,j,i), REAL( fill_value, KIND = wp ), & 12227 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12240 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12228 12241 ENDDO 12229 12242 ENDDO … … 12256 12269 DO k = nzb_do, nzt_do 12257 12270 local_pf(i,j,k) = MERGE( nufp_av(k,j,i), REAL( fill_value, KIND = wp ), & 12258 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12271 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12259 12272 ENDDO 12260 12273 ENDDO … … 12285 12298 DO k = nzb_do, nzt_do 12286 12299 local_pf(i,j,k) = MERGE( ntot_av(k,j,i), REAL( fill_value, KIND = wp ), & 12287 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12300 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12288 12301 ENDDO 12289 12302 ENDDO … … 12305 12318 ENDDO 12306 12319 local_pf(i,j,k) = MERGE( temp_bin, REAL( fill_value, KIND = wp ), & 12307 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12320 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12308 12321 ENDDO 12309 12322 ENDDO … … 12318 12331 DO k = nzb_do, nzt_do 12319 12332 local_pf(i,j,k) = MERGE( pm01_av(k,j,i), REAL( fill_value, KIND = wp ), & 12320 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12333 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12321 12334 ENDDO 12322 12335 ENDDO … … 12338 12351 ENDDO 12339 12352 local_pf(i,j,k) = MERGE( temp_bin, REAL( fill_value, KIND = wp ), & 12340 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12353 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12341 12354 ENDDO 12342 12355 ENDDO … … 12351 12364 DO k = nzb_do, nzt_do 12352 12365 local_pf(i,j,k) = MERGE( pm25_av(k,j,i), REAL( fill_value, KIND = wp ), & 12353 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12366 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12354 12367 ENDDO 12355 12368 ENDDO … … 12371 12384 ENDDO 12372 12385 local_pf(i,j,k) = MERGE( temp_bin, REAL( fill_value, KIND = wp ), & 12373 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12386 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12374 12387 ENDDO 12375 12388 ENDDO … … 12402 12415 ENDDO 12403 12416 local_pf(i,j,k) = MERGE( temp_bin, REAL( fill_value, KIND = wp ), & 12404 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12417 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12405 12418 ENDDO 12406 12419 ENDDO … … 12434 12447 ENDDO 12435 12448 local_pf(i,j,k) = MERGE( temp_bin, REAL( fill_value, KIND = wp ), & 12436 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12449 BTEST( wall_flags_total_0(k,j,i), 0 ) ) 12437 12450 ENDDO 12438 12451 ENDDO … … 12585 12598 ENDDO 12586 12599 ENDDO 12587 ELSE 12600 ELSE 12588 12601 DO i = 1, mask_size_l(mid,1) 12589 12602 DO j = 1, mask_size_l(mid,2) … … 12666 12679 ENDDO 12667 12680 ENDDO 12668 ELSE 12681 ELSE 12669 12682 DO i = 1, mask_size_l(mid,1) 12670 12683 DO j = 1, mask_size_l(mid,2) … … 12755 12768 ENDDO 12756 12769 ENDDO 12757 ENDDO 12770 ENDDO 12758 12771 IF ( .NOT. mask_surface(mid) ) THEN 12759 12772 DO i = 1, mask_size_l(mid,1) … … 12764 12777 ENDDO 12765 12778 ENDDO 12766 ELSE 12779 ELSE 12767 12780 DO i = 1, mask_size_l(mid,1) 12768 12781 DO j = 1, mask_size_l(mid,2) … … 12807 12820 ENDDO 12808 12821 ENDDO 12809 ENDDO 12822 ENDDO 12810 12823 IF ( .NOT. mask_surface(mid) ) THEN 12811 12824 DO i = 1, mask_size_l(mid,1) … … 12816 12829 ENDDO 12817 12830 ENDDO 12818 ELSE 12831 ELSE 12819 12832 DO i = 1, mask_size_l(mid,1) 12820 12833 DO j = 1, mask_size_l(mid,2) … … 12868 12881 ENDDO 12869 12882 ENDDO 12870 ELSE 12883 ELSE 12871 12884 DO i = 1, mask_size_l(mid,1) 12872 12885 DO j = 1, mask_size_l(mid,2) … … 12911 12924 ENDDO 12912 12925 ENDDO 12913 ENDDO 12926 ENDDO 12914 12927 IF ( .NOT. mask_surface(mid) ) THEN 12915 12928 DO i = 1, mask_size_l(mid,1) … … 12920 12933 ENDDO 12921 12934 ENDDO 12922 ELSE 12935 ELSE 12923 12936 DO i = 1, mask_size_l(mid,1) 12924 12937 DO j = 1, mask_size_l(mid,2) … … 13098 13111 ! Description: 13099 13112 ! ------------ 13100 !> Creates index tables for different (aerosol) components 13113 !> Creates index tables for different (aerosol) components 13101 13114 !------------------------------------------------------------------------------! 13102 13115 SUBROUTINE component_index_constructor( self, ncomp, nlist, listcomp ) … … 13583 13596 message_string = 'end_time of the simulation exceeds the time dimension in the dynamic'//& 13584 13597 ' input file.' 13585 CALL message( 'salsa_nesting_offl_init', 'PA0690', 1, 2, 0, 6, 0 ) 13598 CALL message( 'salsa_nesting_offl_init', 'PA0690', 1, 2, 0, 6, 0 ) 13586 13599 ENDIF 13587 13600 … … 13747 13760 CALL message( 'salsa_mod: salsa_nesting_offl_input', 'PA0693', 2, 2, 0, 6, 0 ) 13748 13761 ENDIF 13749 13762 13750 13763 CALL close_input_file( salsa_nest_offl%id_dynamic ) 13751 13764 #endif -
palm/trunk/SOURCE/spectra_mod.f90
r4828 r4842 25 25 ! ----------------- 26 26 ! $Id$ 27 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 28 ! and goto statements are not required any more, 29 ! deprecated namelist removed 30 ! 31 ! 4828 2021-01-05 11:21:41Z Giersch 27 32 ! support for MPI Fortran77 interface (mpif.h) removed 28 33 ! … … 146 151 147 152 USE control_parameters, & 148 ONLY: dt_data_output, & 149 message_string 153 ONLY: dt_data_output 150 154 151 155 IMPLICIT NONE 152 156 153 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 154 155 NAMELIST /spectra_par/ averaging_interval_sp, & 156 comp_spectra_level, & 157 data_output_sp, & 158 dt_dosp, & 159 skip_time_dosp, & 160 spectra_direction 157 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 158 159 INTEGER(iwp) :: io_status !< status after reading the namelist file 160 161 161 162 162 NAMELIST /spectra_parameters/ & … … 168 168 spectra_direction 169 169 ! 170 !-- Position the namelist-file at the beginning (it was already opened in parin), search for the 171 !-- namelist-group of the package and position the file at this line. 172 line = ' ' 173 174 ! 175 !-- Try to find the spectra package 176 REWIND ( 11 ) 177 line = ' ' 178 DO WHILE ( INDEX( line, '&spectra_parameters' ) == 0 ) 179 READ ( 11, '(A)', END=12 ) line 180 ENDDO 181 BACKSPACE ( 11 ) 182 183 ! 184 !-- Read namelist 185 READ ( 11, spectra_parameters, ERR = 10 ) 186 187 ! 188 !-- Default setting of dt_dosp here (instead of check_parameters), because its current value is 189 !-- needed in init_pegrid 190 IF ( dt_dosp == 9999999.9_wp ) dt_dosp = dt_data_output 191 192 ! 193 !-- Set general switch that spectra shall be calculated 194 calculate_spectra = .TRUE. 195 196 GOTO 14 197 198 10 BACKSPACE( 11 ) 199 READ( 11 , '(A)') line 200 CALL parin_fail_message( 'spectra_parameters', line ) 201 ! 202 !-- Try to find the old namelist 203 12 REWIND ( 11 ) 204 line = ' ' 205 DO WHILE ( INDEX( line, '&spectra_par' ) == 0 ) 206 READ ( 11, '(A)', END=14 ) line 207 ENDDO 208 BACKSPACE ( 11 ) 209 210 ! 211 !-- Read namelist 212 READ ( 11, spectra_par, ERR = 13, END = 14 ) 213 214 215 message_string = 'namelist spectra_par is deprecated and will be removed in near future.' // & 216 ' Please use namelist spectra_parameters instead' 217 CALL message( 'spectra_parin', 'PA0487', 0, 1, 0, 6, 0 ) 218 ! 219 !-- Default setting of dt_dosp here (instead of check_parameters), because its current value is 220 !-- needed in init_pegrid 221 IF ( dt_dosp == 9999999.9_wp ) dt_dosp = dt_data_output 222 223 ! 224 !-- Set general switch that spectra shall be calculated 225 calculate_spectra = .TRUE. 226 227 GOTO 14 228 229 13 BACKSPACE( 11 ) 230 READ( 11 , '(A)') line 231 CALL parin_fail_message( 'spectra_par', line ) 232 233 234 14 CONTINUE 170 !-- Position the namelist-file at the beginning (it was already opened in parin), and try to read 171 !-- the namelist. 172 REWIND( 11 ) 173 READ( 11, spectra_parameters, IOSTAT=io_status ) 174 175 ! 176 !-- Action depending on the READ status 177 IF ( io_status == 0 ) THEN 178 ! 179 !-- spectra_parameters namelist was found and read correctly. 180 !-- Default setting of dt_dosp here (instead of check_parameters), because its current value is 181 !-- needed in init_pegrid. 182 IF ( dt_dosp == 9999999.9_wp ) dt_dosp = dt_data_output 183 ! 184 !-- Set general switch that spectra shall be calculated. 185 calculate_spectra = .TRUE. 186 187 ELSEIF ( io_status > 0 ) THEN 188 ! 189 !-- spectra_parameters namelist was found but contained errors. Print an error message including 190 !-- the line that caused the problem. 191 BACKSPACE( 11 ) 192 READ( 11 , '(A)' ) line 193 CALL parin_fail_message( 'spectra_parameters', line ) 194 195 ENDIF 235 196 236 197 END SUBROUTINE spectra_parin -
palm/trunk/SOURCE/surface_data_output_mod.f90
r4828 r4842 25 25 ! ----------------- 26 26 ! $Id$ 27 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 28 ! and goto statements are not required any more 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 27 31 ! Bugfix: correct the down-ward surf_lsm index in the routine surface_data_output_collect_2d 28 32 ! … … 4205 4209 IMPLICIT NONE 4206 4210 4207 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 4208 4209 4210 NAMELIST /surface_data_output_parameters/ averaging_interval_surf, data_output_surf, & 4211 dt_dosurf, dt_dosurf_av, skip_time_dosurf, & 4212 skip_time_dosurf_av, to_netcdf, to_vtk 4213 4214 line = ' ' 4215 4216 ! 4217 !-- Try to find the namelist 4218 REWIND ( 11 ) 4219 line = ' ' 4220 DO WHILE ( INDEX( line, '&surface_data_output_parameters' ) == 0 ) 4221 READ ( 11, '(A)', END=14 ) line 4222 ENDDO 4223 BACKSPACE ( 11 ) 4224 4225 ! 4226 !-- Read namelist 4227 READ ( 11, surface_data_output_parameters, ERR = 10 ) 4228 ! 4229 !-- Set flag that indicates that surface data output is switched on 4230 surface_output = .TRUE. 4231 GOTO 14 4232 4233 10 BACKSPACE( 11 ) 4234 READ( 11 , '(A)') line 4235 CALL parin_fail_message( 'surface_data_output_parameters', line ) 4236 4237 14 CONTINUE 4238 4211 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 4212 4213 INTEGER(iwp) :: io_status !< status after reading the namelist file 4214 4215 4216 NAMELIST /surface_data_output_parameters/ averaging_interval_surf, & 4217 data_output_surf, & 4218 dt_dosurf, & 4219 dt_dosurf_av, & 4220 skip_time_dosurf, & 4221 skip_time_dosurf_av, & 4222 to_netcdf, & 4223 to_vtk 4224 4225 ! 4226 !-- Move to the beginning of the namelist file and try to find and read the namelist. 4227 REWIND( 11 ) 4228 READ( 11, surface_data_output_parameters, IOSTAT=io_status ) 4229 ! 4230 !-- Action depending on the READ status 4231 IF ( io_status == 0 ) THEN 4232 ! 4233 !-- surface_data_output_parameters namelist was found and read correctly. Set flag that indicates 4234 !-- that surface data output is switched on. 4235 surface_output = .TRUE. 4236 4237 ELSEIF ( io_status > 0 ) THEN 4238 ! 4239 !-- surface_data_output_parameters namelist was found but contained errors. Print an error 4240 !-- message including the line that caused the problem. 4241 BACKSPACE( 11 ) 4242 READ( 11 , '(A)') line 4243 CALL parin_fail_message( 'surface_data_output_parameters', line ) 4244 4245 ENDIF 4239 4246 4240 4247 END SUBROUTINE surface_data_output_parin -
palm/trunk/SOURCE/synthetic_turbulence_generator_mod.f90
r4828 r4842 25 25 ! ----------------- 26 26 ! $Id$ 27 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 28 ! and goto statements are not required any more 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 27 31 ! Implementation of downward facing USM and LSM surfaces 28 32 ! 29 33 ! 4647 2020-08-24 16:36:18Z suehring 30 ! Change default value of synthetic turbulence adjustment as well as compute_velocity_seeds_local 31 ! By default, the random-seed computation is now distributed among several cores. Especially for 34 ! Change default value of synthetic turbulence adjustment as well as compute_velocity_seeds_local 35 ! By default, the random-seed computation is now distributed among several cores. Especially for 32 36 ! large length scales this is significantly faster. 33 37 ! 34 38 ! 4640 2020-08-11 16:28:32Z suehring 35 ! - to avoid that the correction term in r11/r22 computation becomes unrealistically high, limit 39 ! - to avoid that the correction term in r11/r22 computation becomes unrealistically high, limit 36 40 ! Obukhov length (term is not valid for near neutral conditions) 37 41 ! - to avoid unrealistically large perturbations, change computation of r21 so that this resembles … … 44 48 ! Bugfix in initialization from ASCII file - x-length scales at the bottom boundary were not 45 49 ! initialized properly 46 ! 50 ! 47 51 ! 4566 2020-06-16 10:11:51Z suehring 48 52 ! - revise parametrization for reynolds-stress components, turbulent length- and time scales … … 50 54 ! - change default value of time interval to adjust turbulence parametrization 51 55 ! - bugfix in computation of amplitude-tensor (vertical flux of horizontal momentum) 52 ! 56 ! 53 57 ! 4562 2020-06-12 08:38:47Z raasch 54 58 ! Parts of r4559 re-formatted 55 ! 59 ! 56 60 ! 4559 2020-06-11 08:51:48Z raasch 57 61 ! File re-formatted to follow the PALM coding standard … … 784 788 ENDIF 785 789 ! 786 !-- Assign initial profiles. Note, this is only required if turbulent inflow from the left is 790 !-- Assign initial profiles. Note, this is only required if turbulent inflow from the left is 787 791 !-- desired, not in case of any of the nesting (offline or self nesting) approaches. 788 IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN 792 IF ( .NOT. nesting_offline .AND. .NOT. child_domain ) THEN 789 793 u_init = mean_inflow_profiles(:,1) 790 794 v_init = mean_inflow_profiles(:,2) … … 1209 1213 SUBROUTINE stg_parin 1210 1214 1211 CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file 1212 1215 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 1216 1217 INTEGER(iwp) :: io_status !< status after reading the namelist file 1213 1218 1214 1219 NAMELIST /stg_par/ dt_stg_adjust, & … … 1217 1222 compute_velocity_seeds_local 1218 1223 1219 line = ' ' 1220 ! 1221 !-- Try to find stg package 1222 REWIND ( 11 ) 1223 line = ' ' 1224 DO WHILE ( INDEX( line, '&stg_par' ) == 0 ) 1225 READ ( 11, '(A)', END = 20 ) line 1226 ENDDO 1227 BACKSPACE ( 11 ) 1228 1229 ! 1230 !-- Read namelist 1231 READ ( 11, stg_par, ERR = 10, END = 20 ) 1232 1233 ! 1234 !-- Set flag that indicates that the synthetic turbulence generator is switched on 1235 syn_turb_gen = .TRUE. 1236 GOTO 20 1237 1238 10 BACKSPACE( 11 ) 1239 READ( 11 , '(A)') line 1240 CALL parin_fail_message( 'stg_par', line ) 1241 1242 20 CONTINUE 1224 1225 ! 1226 !-- Move to the beginning of the namelist file and try to find and read the namelist. 1227 REWIND( 11 ) 1228 READ( 11, stg_par, IOSTAT=io_status ) 1229 1230 ! 1231 !-- Action depending on the READ status 1232 IF ( io_status == 0 ) THEN 1233 ! 1234 !-- stg_par namelist was found and read correctly. Set flag that indicates that the synthetic 1235 !-- turbulence generator is switched on. 1236 syn_turb_gen = .TRUE. 1237 1238 ELSEIF ( io_status > 0 ) THEN 1239 ! 1240 !-- stg_par namelist was found but contained errors. Print an error message including the line 1241 !-- that caused the problem. 1242 BACKSPACE( 11 ) 1243 READ( 11 , '(A)') line 1244 CALL parin_fail_message( 'stg_par', line ) 1245 1246 ENDIF 1243 1247 1244 1248 END SUBROUTINE stg_parin … … 1807 1811 ENDDO 1808 1812 ENDDO 1809 1813 1810 1814 #if defined( __parallel ) 1811 1815 ! … … 1937 1941 REAL(wp), DIMENSION(-mergp_x:mergp_x,nzb:nzt+1) :: b_x !< filter function in x-direction 1938 1942 REAL(wp), DIMENSION(-mergp_z:mergp_z,nzb:nzt+1) :: b_z !< filter function in z-direction 1939 1943 1940 1944 REAL(wp), DIMENSION(nzb_y_stg:nzt_y_stg+1,nxl:nxr) :: f_n_l !< local velocity seed 1941 1945 REAL(wp), DIMENSION(nzb:nzt+1,nxl:nxr) :: f_n !< velocity seed … … 1982 1986 ENDDO 1983 1987 ENDDO 1984 1988 1985 1989 #if defined( __parallel ) 1986 1990 ! … … 2082 2086 ! Description: 2083 2087 ! ------------ 2084 !> Parametrization of the Reynolds-stress componentes, turbulent length- and time scales. The 2088 !> Parametrization of the Reynolds-stress componentes, turbulent length- and time scales. The 2085 2089 !> parametrization follows Brost et al. (1982) with modifications described in Rotach et al. (1996), 2086 2090 !> which is applied in state-of-the-art dispserion modelling. … … 2165 2169 ! 2166 2170 !-- u'w' and v'w'. After calculation of the longitudinal and crosswind component 2167 !-- these are projected along the x- and y-direction. Note, it is assumed that 2171 !-- these are projected along the x- and y-direction. Note, it is assumed that 2168 2172 !-- the flux within the boundary points opposite to the vertical gradient. 2169 2173 rlon2 = scale_us**2 * ( zzi - 1.0_wp ) … … 2298 2302 DO k = nzb+1, nzt+1 2299 2303 IF ( r11(k) > 10E-6_wp ) THEN 2300 a11(k) = SQRT( r11(k) ) 2304 a11(k) = SQRT( r11(k) ) 2301 2305 a21(k) = r21(k) / a11(k) 2302 2306 a31(k) = r31(k) / a11(k) … … 2308 2312 ENDDO 2309 2313 DO k = nzb+1, nzt+1 2310 a22(k) = r22(k) - a21(k)**2 2314 a22(k) = r22(k) - a21(k)**2 2311 2315 IF ( a22(k) > 10E-6_wp ) THEN 2312 2316 a22(k) = SQRT( a22(k) ) 2313 2317 a32(k) = ( r32(k) - a21(k) * a31(k) ) / a22(k) 2314 ELSE 2318 ELSE 2315 2319 a22(k) = 10E-8_wp 2316 2320 a32(k) = 10E-8_wp … … 2355 2359 CALL calc_scaling_variables 2356 2360 ! 2357 !-- Parametrize Reynolds-stress tensor. Parametrization follows Brost et al. (1982) with 2361 !-- Parametrize Reynolds-stress tensor. Parametrization follows Brost et al. (1982) with 2358 2362 !-- modifications described in Rotach et al. (1996) and is based on boundary-layer depth, friction 2359 !-- velocity and velocity scale. 2363 !-- velocity and velocity scale. 2360 2364 CALL parametrize_turbulence 2361 2365 ! 2362 !-- Calculate coefficient matrix from Reynolds stress tensor 2366 !-- Calculate coefficient matrix from Reynolds stress tensor 2363 2367 !-- (Lund rotation) 2364 2368 CALL calc_coeff_matrix -
palm/trunk/SOURCE/urban_surface_mod.f90
r4831 r4842 27 27 ! ----------------- 28 28 ! $Id$ 29 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 30 ! and goto statements are not required any more 31 ! 32 ! 4831 2021-01-06 17:55:14Z suehring 29 33 ! Bugfix in checking output variables with suffix indicating the surface facing 30 ! 34 ! 31 35 ! 4828 2021-01-05 11:21:41Z Giersch 32 36 ! Deactivated A/C cooling capacity for office buildings built before year 2000. … … 43 47 ! - bugfix in openmp directive 44 48 ! - make t_green_h and t_green_v public (required in indoor model) 45 ! 49 ! 46 50 ! 4747 2020-10-16 09:19:57Z pavelkrc 47 51 ! Fix window absorptivity calculation (correctly account for 2-sided reflection) 48 ! 52 ! 49 53 ! 4738 2020-10-14 08:05:07Z maronga 50 54 ! Updating building data base (on behalf of Sascha Rissmann) … … 111 115 ! 4602 2020-07-14 14:49:45Z suehring 112 116 ! Add missing initialization of albedo type with values given from static input file 113 ! 117 ! 114 118 ! 4581 2020-06-29 08:49:58Z suehring 115 119 ! Missing initialization in case of cyclic_fill runs 116 ! 120 ! 117 121 ! 4535 2020-05-15 12:07:23Z raasch 118 122 ! bugfix for restart data format query 119 ! 123 ! 120 124 ! 4517 2020-05-03 14:29:30Z raasch 121 125 ! added restart with MPI-IO for reading local arrays 122 ! 126 ! 123 127 ! 4510 2020-04-29 14:19:18Z raasch 124 128 ! Further re-formatting to follow the PALM coding standard … … 318 322 !> ------------- 319 323 !> @todo Revise sorting of building_pars 320 !> @todo Revise initialization when building_pars / building_surface_pars are provided - 324 !> @todo Revise initialization when building_pars / building_surface_pars are provided - 321 325 !> intialization is not consistent to building_pars 322 326 !> @todo Revise flux conversion in energy-balance solver … … 5813 5817 IMPLICIT NONE 5814 5818 5815 CHARACTER(LEN=80) :: line !< string containing current line of file PARIN 5816 5817 NAMELIST /urban_surface_par/ & 5818 building_type, & 5819 roof_category, & 5820 roof_inner_temperature, & 5821 roughness_concrete, & 5822 soil_inner_temperature, & 5823 urban_surface, & 5824 usm_wall_mod, & 5825 wall_category, & 5826 wall_inner_temperature, & 5827 window_inner_temperature 5828 5819 CHARACTER(LEN=100) :: line !< string containing current line of file PARIN 5820 5821 INTEGER(iwp) :: io_status !< status after reading the namelist file 5829 5822 5830 5823 NAMELIST /urban_surface_parameters/ & … … 5843 5836 5844 5837 ! 5845 !-- Try to find urban surface model package 5846 REWIND ( 11 ) 5847 line = ' ' 5848 DO WHILE ( INDEX( line, '&urban_surface_parameters' ) == 0 ) 5849 READ ( 11, '(A)', END = 12 ) line 5850 ENDDO 5851 BACKSPACE ( 11 ) 5852 5853 ! 5854 !-- Read user-defined namelist 5855 READ ( 11, urban_surface_parameters, ERR = 10 ) 5856 5857 ! 5858 !-- Set flag that indicates that the urban surface model is switched on 5859 urban_surface = .TRUE. 5860 5861 GOTO 14 5862 5863 10 BACKSPACE( 11 ) 5864 READ( 11 , '(A)') line 5865 CALL parin_fail_message( 'urban_surface_parameters', line ) 5866 ! 5867 !-- Try to find old namelist 5868 12 REWIND ( 11 ) 5869 line = ' ' 5870 DO WHILE ( INDEX( line, '&urban_surface_par' ) == 0 ) 5871 READ ( 11, '(A)', END = 14 ) line 5872 ENDDO 5873 BACKSPACE ( 11 ) 5874 5875 ! 5876 !-- Read user-defined namelist 5877 READ ( 11, urban_surface_par, ERR = 13, END = 14 ) 5878 5879 message_string = 'namelist urban_surface_par is deprecated and will be removed in near ' // & 5880 'future. Please use namelist urban_surface_parameters instead' 5881 CALL message( 'usm_parin', 'PA0487', 0, 1, 0, 6, 0 ) 5882 5883 ! 5884 !-- Set flag that indicates that the urban surface model is switched on 5885 urban_surface = .TRUE. 5886 5887 GOTO 14 5888 5889 13 BACKSPACE( 11 ) 5890 READ( 11 , '(A)') line 5891 CALL parin_fail_message( 'urban_surface_par', line ) 5892 5893 5894 14 CONTINUE 5895 5838 !-- Move to the beginning of the namelist file and try to find and read the namelist. 5839 REWIND( 11 ) 5840 READ( 11, urban_surface_parameters, IOSTAT=io_status ) 5841 5842 ! 5843 !-- Action depending on the READ status 5844 IF ( io_status == 0 ) THEN 5845 ! 5846 !-- urban_surface_parameters namelist was found and read correctly. Set flag that indicates that 5847 !-- the urban surface model is switched on. 5848 urban_surface = .TRUE. 5849 5850 ELSEIF ( io_status > 0 ) THEN 5851 ! 5852 !-- urban_surface_parameters namelist was found but contained errors. Print an error message 5853 !-- including the line that caused the problem. 5854 BACKSPACE( 11 ) 5855 READ( 11 , '(A)' ) line 5856 CALL parin_fail_message( 'urban_surface_parameters', line ) 5857 5858 ENDIF 5896 5859 5897 5860 END SUBROUTINE usm_parin … … 7584 7547 1512000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 7585 7548 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 7586 0.81_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7549 0.81_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7587 7550 0.81_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 7588 7551 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature 7589 293.15_wp, & !< parameter 13 - [K] indoor target winter temperature 7552 293.15_wp, & !< parameter 13 - [K] indoor target winter temperature 7590 7553 0.93_wp, & !< parameter 14 - [-] wall emissivity above ground floor level 7591 7554 0.86_wp, & !< parameter 15 - [-] green emissivity above ground floor level … … 7726 7689 /) 7727 7690 7728 building_pars(:,2) = (/ & 7691 building_pars(:,2) = (/ & 7729 7692 0.75_wp, & !< parameter 0 - [-] wall fraction above ground floor level 7730 7693 0.25_wp, & !< parameter 1 - [-] window fraction above ground floor level … … 7737 7700 2112000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 7738 7701 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 7739 0.046_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7702 0.046_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7740 7703 2.1_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 7741 7704 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature … … 7879 7842 /) 7880 7843 7881 building_pars(:,3) = (/ & 7844 building_pars(:,3) = (/ & 7882 7845 0.71_wp, & !< parameter 0 - [-] wall fraction above ground floor level 7883 7846 0.29_wp, & !< parameter 1 - [-] window fraction above ground floor level … … 7890 7853 1344000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 7891 7854 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 7892 0.035_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7855 0.035_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 7893 7856 0.68_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 7894 7857 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature … … 8009 7972 4.5_wp, & !< parameter 127 - [m2/m2] ratio internal surface/floor area 8010 7973 40.0_wp, & !< parameter 128 - [W] maximal heating capacity 8011 0.0_wp, & !< parameter 129 - [W] maximal cooling capacity 7974 0.0_wp, & !< parameter 129 - [W] maximal cooling capacity 8012 7975 0.0_wp, & !< parameter 130 - [W/m2] additional internal heat gains dependent on occupancy of the room 8013 7976 4.2_wp, & !< parameter 131 - [W/m2] basic internal heat gains without occupancy of the room … … 8043 8006 1512000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 8044 8007 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 8045 0.81_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8008 0.81_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8046 8009 0.81_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 8047 8010 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature … … 8156 8119 2.9_wp, & !< parameter 121 - [W/(m2*K)] u-value windows 8157 8120 1.0_wp, & !< parameter 122 - [1/h] basic airflow without occupancy of the room for - summer 1.0_wp, winter 0.2 8158 1.0_wp, & !< parameter 123 - [1/h] additional airflow dependent on occupancy of the room for - summer 1.0_wp, winter 0.8 8121 1.0_wp, & !< parameter 123 - [1/h] additional airflow dependent on occupancy of the room for - summer 1.0_wp, winter 0.8 8159 8122 0.0_wp, & !< parameter 124 - [-] heat recovery efficiency 8160 8123 3.0_wp, & !< parameter 125 - [m2/m2] dynamic parameter specific effective surface … … 8196 8159 2112000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 8197 8160 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 8198 2.1_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8161 2.1_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8199 8162 0.046_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 8200 8163 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature … … 8308 8271 0.7_wp, & !< parameter 120 - [-] g-value windows 8309 8272 1.7_wp, & !< parameter 121 - [W/(m2*K)] u-value windows 8310 1.0_wp, & !< parameter 122 - [1/h] basic airflow without occupancy of the room for - summer 1.0_wp, winter 0.2 8273 1.0_wp, & !< parameter 122 - [1/h] basic airflow without occupancy of the room for - summer 1.0_wp, winter 0.2 8311 8274 1.0_wp, & !< parameter 123 - [1/h] additional airflow dependent on occupancy of the room for - summer 1.0_wp, winter 0.8 8312 8275 0.0_wp, & !< parameter 124 - [-] heat recovery efficiency … … 8349 8312 1344000.0_wp, & !< parameter 8 - [J/(m3*K)] heat capacity 3rd wall layer above ground floor level 8350 8313 0.93_wp, & !< parameter 9 - [W/(m*K)] thermal conductivity 1st wall layer (outside) above ground floor level 8351 0.035_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8314 0.035_wp, & !< parameter 10 - [W/(m*K)] thermal conductivity 2nd wall layer above ground floor level 8352 8315 0.68_wp, & !< parameter 11 - [W/(m*K)] thermal conductivity 3rd wall layer above ground floor level 8353 8316 299.15_wp, & !< parameter 12 - [K] indoor target summer temperature … … 8630 8593 1848000.0_wp, & !< parameter 136 - [J/(m3*K)] heat capacity 4th wall layer (downside) above ground floor level 8631 8594 1.0_wp, & !< parameter 137 - [W/(m*K)] thermal conductivity 4th wall layer (downside) above ground floor level 8632 1848000.0_wp, & !< parameter 138 - [J/(m3*K)] heat capacity 4th wall layer (downside) ground floor level 8595 1848000.0_wp, & !< parameter 138 - [J/(m3*K)] heat capacity 4th wall layer (downside) ground floor level 8633 8596 1.0_wp, & !< parameter 139 - [W/(m*K)] thermal conductivity 4th wall layer (downside) ground floor level 8634 8597 1848000.0_wp, & !< parameter 140 - [J/(m3*K)] heat capacity 4th wall layer (downside) ground plate -
palm/trunk/SOURCE/virtual_flight_mod.f90
r4828 r4842 20 20 ! Current revisions: 21 21 ! ----------------- 22 ! 23 ! 22 ! 23 ! 24 24 ! Former revisions: 25 25 ! ----------------- 26 26 ! $Id$ 27 ! reading of namelist file and actions in case of namelist errors revised so that statement labels 28 ! and goto statements are not required any more 29 ! 30 ! 4828 2021-01-05 11:21:41Z Giersch 27 31 ! Bugfix, use time_since_reference_point instead of simulated_time 28 ! 32 ! 29 33 ! 4535 2020-05-15 12:07:23Z raasch 30 34 ! bugfix for restart data format query 31 ! 35 ! 32 36 ! 4522 2020-05-06 14:17:05Z suehring 33 37 ! Modularize user_init_flight in order to provide an explicit interface. 34 ! 38 ! 35 39 ! 4497 2020-04-15 10:20:51Z raasch 36 40 ! file re-formatted to follow the PALM coding standard … … 39 43 ! 4495 2020-04-13 20:11:20Z raasch 40 44 ! restart data handling with MPI-IO added 41 ! 45 ! 42 46 ! 4360 2020-01-07 11:25:50Z suehring 43 47 ! Corrected "Former revisions" section … … 226 230 SUBROUTINE flight_parin 227 231 228 USE control_parameters, &229 ONLY: message_string230 231 232 IMPLICIT NONE 232 233 233 CHARACTER(LEN=80) :: line !< dummy string that contains the current line of the parameter file 234 235 NAMELIST /flight_par/ flight_angle, & 236 flight_begin, & 237 flight_end, & 238 flight_level, & 239 leg_mode, & 240 max_elev_change, & 241 rate_of_climb, & 242 speed_agl, & 243 x_end, & 244 x_start, & 245 y_end, & 246 y_start 234 CHARACTER(LEN=100) :: line !< dummy string that contains the current line of the parameter file 235 236 INTEGER(iwp) :: io_status !< status after reading the namelist file 247 237 248 238 … … 259 249 y_end, & 260 250 y_start 261 ! 262 ! -- Try to find the namelist flight_par263 REWIND ( 11 ) 264 line = ' '265 DO WHILE ( INDEX( line, '&virtual_flight_parameters' ) == 0)266 READ ( 11, '(A)', END = 12 ) line 267 ENDDO 268 BACKSPACE ( 11 ) 269 270 ! 271 !-- Read namelist272 READ ( 11, virtual_flight_parameters, ERR = 10 ) 273 ! 274 !-- Set switch so that virtual flights shall be carried out 275 virtual_flight = .TRUE.276 277 GOTO 14 278 279 10BACKSPACE( 11 )280 READ( 11 , '(A)' ) line251 252 ! 253 !-- Move to the beginning of the namelist file and try to find and read the namelist. 254 REWIND( 11 ) 255 READ( 11, virtual_flight_parameters, IOSTAT=io_status ) 256 257 ! 258 !-- Action depending on the READ status 259 IF ( io_status == 0 ) THEN 260 ! 261 !-- virtual_flight_parameters namelist was found and read correctly. Set switch that virtual 262 !-- flights are carried out. 263 virtual_flight = .TRUE. 264 265 ELSEIF ( io_status > 0 ) THEN 266 ! 267 !-- virtual_flight_parameters namelist was found, but contained errors. Print an error message 268 !-- including the line that caused the problem. 269 BACKSPACE( 11 ) 270 READ( 11 , '(A)' ) line 281 271 CALL parin_fail_message( 'virtual_flight_parameters', line ) 282 ! 283 !-- Try to find the old namelist 284 12 REWIND ( 11 ) 285 line = ' ' 286 DO WHILE ( INDEX( line, '&flight_par' ) == 0 ) 287 READ ( 11, '(A)', END = 14 ) line 288 ENDDO 289 BACKSPACE ( 11 ) 290 291 ! 292 !-- Read namelist 293 READ ( 11, flight_par, ERR = 13, END = 14 ) 294 295 message_string = 'namelist flight_par is deprecated and will be ' // & 296 'removed in near future.& Please use namelist ' // & 297 'virtual_flight_parameters instead' 298 CALL message( 'flight_parin', 'PA0487', 0, 1, 0, 6, 0 ) 299 ! 300 !-- Set switch so that virtual flights shall be carried out 301 virtual_flight = .TRUE. 302 303 GOTO 14 304 305 13 BACKSPACE( 11 ) 306 READ( 11 , '(A)') line 307 CALL parin_fail_message( 'flight_par', line ) 308 309 14 CONTINUE 272 273 ENDIF 310 274 311 275 END SUBROUTINE flight_parin 276 312 277 313 278 !--------------------------------------------------------------------------------------------------! -
palm/trunk/TESTS/cases/topo_from_ASCII_file/INPUT/topo_from_ASCII_file_p3d
r4462 r4842 1 &inipar nx = 39, ny = 39, nz = 40, 1 &initialization_parameters 2 nx = 39, ny = 39, nz = 40, 2 3 dx = 2.0, dy = 2.0, dz = 2.0, 3 4 … … 20 21 topography_grid_convention = 'cell_center', / ! default 21 22 22 &d3par end_time = 900.0, 23 &runtime_parameters 24 end_time = 900.0, 23 25 termination_time_needed = 900.0, 24 26
Note: See TracChangeset
for help on using the changeset viewer.
