Home

Context Navigation

source: palm/trunk/UTIL/combine_plot_fields.f90 @ 4459

Last change on this file since 4459 was 4274, checked in by raasch, 5 years ago
bugfix for processing data from atmosphere-ocean coupled runs (only atmosphere data were processed, but twice)
Property svn:keywords set to `Id`
File size: 30.2 KB

Rev	Line
[1]	1	PROGRAM combine_plot_fields
	2
	3	!------------------------------------------------------------------------------!
[2696]	4	! This file is part of the PALM model system.
[1046]	5	!
[2696]	6	! PALM is free software: you can redistribute it and/or modify it under the
	7	! terms of the GNU General Public License as published by the Free Software
	8	! Foundation, either version 3 of the License, or (at your option) any later
	9	! version.
[1046]	10	!
	11	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	12	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	13	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	14	!
	15	! You should have received a copy of the GNU General Public License along with
	16	! PALM. If not, see <http://www.gnu.org/licenses/>.
	17	!
[2718]	18	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2696]	19	!------------------------------------------------------------------------------!
[1046]	20	!
[691]	21	! Current revisions:
[1]	22	! -----------------
[1469]	23	!
[2365]	24	!
[226]	25	! Former revisions:
	26	! -----------------
	27	! $Id: combine_plot_fields.f90 4274 2019-10-28 09:07:08Z oliver.maas $
[4274]	28	! bugfix for processing data from atmosphere-ocean coupled runs (only atmosphere data were
	29	! processed, but twice)
	30	!
	31	! 3241 2018-09-12 15:02:00Z raasch
[3241]	32	! unused variables removed
	33	!
	34	! 2718 2018-01-02 08:49:38Z maronga
[2716]	35	! Corrected "Former revisions" section
	36	!
	37	! 2696 2017-12-14 17:12:51Z kanani
	38	! Change in file header (GPL part)
	39	!
	40	! 2669 2017-12-06 16:03:27Z raasch
[2669]	41	! data of 3d-nest runs are completely processed now
	42	!
	43	! 2523 2017-10-05 14:42:47Z kanani
[2523]	44	! Increased LEN for CHARACTER variable var_name, equal to the value in PALM
	45	!
	46	! 2512 2017-10-04 08:26:59Z raasch
[2512]	47	! PALM output does not contain ghost layer data any more
	48	! avs- and iso2d-related parts removed, handling of compressed data removed
	49	!
	50	! 2365 2017-08-21 14:59:59Z kanani
[2365]	51	! Vertical grid nesting implemented (SadiqHuq)
[226]	52	!
[2365]	53	! 1809 2016-04-05 20:13:28Z raasch
	54	!
[1809]	55	! 1808 2016-04-05 19:44:00Z raasch
	56	! cpu measurements are done with standard FORTRAN routine on every machine
	57	!
[1552]	58	! 1551 2015-03-03 14:18:16Z maronga
	59	! Adjustments for data output of soil model quantities
	60	!
[1469]	61	! 1468 2014-09-24 14:06:57Z maronga
	62	! Adapted for use on up to 6-digit processor cores (not tested)
	63	!
[1395]	64	! 1394 2014-05-06 10:17:31Z keck
	65	! KIND-attribute added to all INTEGER and REAL declaration statements
	66	!
[1047]	67	! 1046 2012-11-09 14:38:45Z maronga
	68	! code put under GPL (PALM 3.9)
	69	!
[692]	70	! 691 2011-03-04 08:45:30Z maronga
	71	! Bugfix: check for precursor ocean runs, removed typo
	72	!
[494]	73	! 493 2010-03-01 08:30:24Z raasch
	74	! Exit in case of already complete NetCDF data (due to parallel output in PALM)
	75	! cpu measurements included
	76	!
[226]	77	! 210 2008-11-06 08:54:02Z raasch
[210]	78	! Size of pf3d adjusted to the required output size (1 gridpoint less, along
	79	! all three dimensions), because output of a subset of the data
	80	! (pf3d(nxa:nxe...) in the NF90_PUT_VAR statement caused segmentation fault
	81	! with the INTEL compiler.
[191]	82	! Subdomain data are read into temporary arrays pf_tmp/pf3d_tmp in order to
	83	! avoid INTEL compiler warnings about (automatic) creation of temporary arrays
[179]	84	! Bugfix: three misplaced #endif directives
[1]	85	!
[139]	86	! 114 2007-10-10 00:03:15Z raasch
	87	! Bugfix: model_string needed a default value
	88	!
[114]	89	! Aug 07 Loop for processing of output by coupled runs, id_string does not
	90	! contain modus any longer
	91	!
[1]	92	! 18/01/06 Output of time-averaged data
	93	!
	94	! 25/05/05 Errors removed
	95	!
	96	! 26/04/05 Output in NetCDF format, iso2d and avs output only if parameter
	97	! file exists
	98	!
	99	! 31/10/01 All comments and messages translated into English
	100	!
	101	! 23/02/99 Keine Bearbeitung komprimierter 3D-Daten
	102	! Ursprungsversion vom 28/07/97
	103	!
	104	!
	105	! Description:
	106	! ------------
	107	! This routine combines data of the PALM-subdomains into one file. In PALM
	108	! every processor element opens its own file and writes 2D- or 3D-binary-data
	109	! into it (different files are opened for xy-, xz-, yz-cross-sections and
	110	! 3D-data). For plotting or analyzing these PE-data have to be collected and
	111	! to be put into single files, which is done by this routine.
	112	! Output format is NetCDF. Additionally, a data are output in a binary format
	113	! readable by ISO2D-software (cross-sections) and by AVS (3D-data).
	114	!------------------------------------------------------------------------------!
	115
	116	#if defined( __netcdf )
	117	USE netcdf
	118	#endif
	119
	120	IMPLICIT NONE
	121
	122	!
	123	!-- Local variables
[2669]	124	CHARACTER (LEN=2) :: modus
	125	CHARACTER (LEN=4) :: model_string
[1468]	126	CHARACTER (LEN=6) :: id_string
[2523]	127	CHARACTER (LEN=30) :: dimname, var_name
[1]	128	CHARACTER (LEN=40) :: filename
	129
	130	CHARACTER (LEN=2000), DIMENSION(0:1) :: var_list
	131
[1394]	132	INTEGER, PARAMETER :: iwp = 4, spk = SELECTED_REAL_KIND( 6 ), wp = 8
[1]	133
[1394]	134	INTEGER(iwp) :: av, danz, i, id, j, k, model, models, nc_stat, &
[3241]	135	nxa, nxe, nya, nye, &
[2669]	136	nza, nze, pos, time_step, xa, xe, xxa, xxe, ya, ya_do, &
[3241]	137	ya_tot, ye, ye_do, ye_tot, yya, yye, za, ze
[1]	138
[1808]	139	INTEGER(8) :: count, count_rate
[493]	140
[1394]	141	INTEGER(iwp), DIMENSION(0:1) :: current_level, current_var, &
	142	fanz, id_set, id_var_time, num_var
	143	INTEGER(iwp), DIMENSION(4) :: id_dims_loc
	144	INTEGER(iwp), DIMENSION(0:1,4) :: id_dims
	145	INTEGER(iwp), DIMENSION(0:1,1000) :: id_var, levels
[1]	146
[4274]	147	LOGICAL :: found, found_ao, nest3d, netcdf_output, netcdf_parallel, netcdf_0, &
[2669]	148	netcdf_1, vnest
[1]	149
[3241]	150	REAL(wp) :: cpu_start_time, cpu_end_time, simulated_time
[1394]	151	REAL(wp), DIMENSION(:,:), ALLOCATABLE :: pf, pf_tmp
[191]	152	REAL(spk), DIMENSION(:,:,:), ALLOCATABLE :: pf3d, pf3d_tmp
[1]	153
[2365]	154
	155
[1]	156	PRINT*, ''
[114]	157	PRINT*, ''
[108]	158	PRINT, ' combine_plot_fields *'
[114]	159
	160	!
[2669]	161	!-- Find out if a coupled or nested run has been carried out
[4274]	162	INQUIRE( FILE='COUPLING_PORT_OPENED', EXIST=found_ao )
[2365]	163	INQUIRE( FILE='VNESTING_PORT_OPENED', EXIST=vnest )
[2669]	164	INQUIRE( FILE='3DNESTING', EXIST=nest3d )
[4274]	165	IF ( found_ao ) THEN
[108]	166	models = 2
	167	PRINT*, ' coupled run'
[2365]	168	ELSEIF ( vnest ) THEN
	169	models = 2
	170	PRINT*, ' Vertically nested grid coupling'
[2669]	171	ELSEIF ( nest3d ) THEN
	172	OPEN( 90, FILE='3DNESTING', FORM='FORMATTED' )
	173	READ ( 90, '(I2)' ) models
	174	CLOSE ( 90 )
	175	PRINT*, ' 3d-nest run'
	176	PRINT*, ' number of nest domains = ', models
[108]	177	ELSE
	178	models = 1
	179	PRINT*, ' uncoupled run'
	180	ENDIF
[114]	181
	182	!
[691]	183	!-- Find out if a precursor ocean run has been carried out
	184	INQUIRE( FILE='PRECURSOR_OCEAN', EXIST=found )
	185	IF ( found ) THEN
	186	model_string = '_O'
	187	PRINT*, ' precursor ocean run'
	188	ELSE
	189	model_string = ''
	190	ENDIF
	191
	192	!
[114]	193	!-- Do everything for each model
[108]	194	DO model = 1, models
[114]	195	!
	196	!-- Set the model string used to identify the filenames
[4274]	197	IF ( found_ao .OR. vnest ) THEN
[108]	198	PRINT*, ''
	199	IF ( model == 2 ) THEN
[2365]	200	IF ( vnest ) THEN
	201	model_string = '_N'
	202	PRINT*, ' now combining FINE data'
	203	PRINT*, ' ========================'
	204	ELSE
	205	model_string = '_O'
	206	PRINT*, ' now combining ocean data'
	207	PRINT*, ' ========================'
	208	ENDIF
[108]	209	ELSE
[2365]	210	IF ( vnest ) THEN
	211	PRINT*, ' now combining COARSE data'
	212	PRINT*, ' ============================='
	213	ELSE
	214	PRINT*, ' now combining atmosphere data'
	215	PRINT*, ' ============================='
	216	ENDIF
[108]	217	ENDIF
[2669]	218	ELSEIF ( nest3d ) THEN
	219	PRINT*, ''
	220	PRINT*, '--> processing nest id = ', model
	221	IF ( model == 1 ) THEN
	222	model_string = ''
	223	ELSE
	224	WRITE( model_string, '(A2,I2.2)' ) '_N', model
	225	ENDIF
[108]	226	ENDIF
[1]	227	!
[108]	228	!-- 2D-arrays for ISO2D
	229	!-- Main loop for the three different cross-sections, starting with
	230	!-- xy-section
	231	modus = 'XY'
	232	PRINT*, ''
	233	DO WHILE ( modus == 'XY' .OR. modus == 'XZ' .OR. modus == 'YZ' )
[1]	234	!
[493]	235	!-- Take current time
	236	CALL SYSTEM_CLOCK( count, count_rate )
	237	cpu_start_time = REAL( count ) / REAL( count_rate )
	238
	239	netcdf_parallel = .FALSE.
	240	!
[108]	241	!-- Check, if file from PE0 exists. If it does not exist, PALM did not
	242	!-- create any output for this cross-section.
	243	danz = 0
[1468]	244	WRITE (id_string,'(I6.6)') danz
[108]	245	INQUIRE ( &
	246	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	247	EXIST=found )
	248	!
	249	!-- Find out the number of files (equal to the number of PEs which
	250	!-- have been used in PALM) and open them
	251	DO WHILE ( found )
[1]	252
[108]	253	OPEN ( danz+110, &
	254	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	255	FORM='UNFORMATTED' )
	256	danz = danz + 1
[1468]	257	WRITE (id_string,'(I6.6)') danz
[108]	258	INQUIRE ( &
	259	FILE='PLOT2D_'//modus//TRIM( model_string )//'_'//id_string, &
	260	EXIST=found )
[1]	261
[108]	262	ENDDO
[1]	263
	264	!
[108]	265	!-- Inquire whether a NetCDF file exists
	266	INQUIRE( FILE='DATA_2D_'//modus//'_NETCDF'//TRIM( model_string ), &
	267	EXIST=netcdf_0 )
[1]	268
	269	!
[108]	270	!-- Inquire whether a NetCDF file for time-averaged data exists
	271	INQUIRE( FILE='DATA_2D_'//modus//'_AV_NETCDF'//TRIM( model_string ),&
	272	EXIST=netcdf_1 )
[1]	273
[108]	274	IF ( netcdf_0 .OR. netcdf_1 ) THEN
	275	netcdf_output = .TRUE.
[493]	276	!
	277	!-- Inquire whether the NetCDF file is already complete (parallel
	278	!-- output)
	279	INQUIRE( FILE='NO_COMBINE_PLOT_FIELDS_'//modus, &
	280	EXIST=netcdf_parallel )
	281	IF ( netcdf_parallel ) THEN
	282	netcdf_parallel = .TRUE.
	283	ELSE
	284	netcdf_parallel = .FALSE.
	285	ENDIF
[108]	286	ELSE
	287	netcdf_output = .FALSE.
	288	ENDIF
[1]	289
	290	!
[108]	291	!-- Info-output
	292	PRINT*, ''
[1]	293	#if defined( __netcdf )
[493]	294	IF ( netcdf_output ) THEN
	295	IF ( netcdf_parallel ) THEN
	296	PRINT*, ' NetCDF ' // modus // '-data are in one file ', &
	297	'(NetCDF4-format) - merging not neccessary'
	298	ELSE
	299	PRINT*, ' NetCDF output enabled'
	300	ENDIF
	301	ENDIF
[1]	302	#else
[108]	303	IF ( netcdf_output ) THEN
	304	PRINT*, '--- Sorry, no NetCDF support on this host'
	305	netcdf_output = .FALSE.
	306	ENDIF
[1]	307	#endif
[493]	308	IF ( .NOT. netcdf_parallel ) THEN
	309	IF ( danz /= 0 ) THEN
	310	PRINT*, ' ',modus,'-section: ', danz, ' file(s) found'
	311	ELSE
	312	PRINT*, ' no ', modus, '-section data available'
	313	ENDIF
[108]	314	ENDIF
[1]	315
[493]	316	IF ( netcdf_output .AND. .NOT. netcdf_parallel .AND. danz /= 0 ) &
	317	THEN
[1]	318	#if defined( __netcdf )
[108]	319	DO av = 0, 1
[1]	320
[108]	321	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
	322	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
[1]	323
	324	!
[108]	325	!-- Open NetCDF dataset
	326	IF ( av == 0 ) THEN
	327	filename = 'DATA_2D_'//modus//'_NETCDF' &
	328	//TRIM( model_string )
	329	ELSE
	330	filename = 'DATA_2D_'//modus//'_AV_NETCDF' &
	331	//TRIM( model_string )
	332	ENDIF
	333	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
	334	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 1 )
[1]	335
	336	!
[108]	337	!-- Get the list of variables (order of variables corresponds with
	338	!-- the order of data on the binary file)
	339	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
	340	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
	341	var_list(av) )
	342	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 2 )
[1]	343
	344	!
[108]	345	!-- Inquire id of the time coordinate variable
	346	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
	347	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 3 )
[1]	348
	349	!
[108]	350	!-- Count number of variables; there is one more semicolon in the
	351	!-- string than variable names
	352	num_var(av) = -1
	353	DO i = 1, LEN( var_list(av) )
	354	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) +1
	355	ENDDO
[1]	356
	357	!
[108]	358	!-- Extract the variable names from the list and inquire their
	359	!-- NetCDF IDs
	360	pos = INDEX( var_list(av), ';' )
[1]	361	!
[108]	362	!-- Loop over all variables
	363	DO i = 1, num_var(av)
[1]	364
	365	!
[108]	366	!-- Extract variable name from list
	367	var_list(av) = var_list(av)(pos+1:)
	368	pos = INDEX( var_list(av), ';' )
	369	var_name = var_list(av)(1:pos-1)
[1]	370
	371	!
[108]	372	!-- Get variable ID from name
	373	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
	374	id_var(av,i) )
	375	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 4 )
[1]	376
	377	!
[108]	378	!-- Get number of x/y/z levels for that variable
	379	nc_stat = NF90_INQUIRE_VARIABLE( id_set(av), id_var(av,i), &
	380	dimids = id_dims_loc )
	381	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 5 )
	382	id_dims(av,:) = id_dims_loc
[1]	383
	384	!
[108]	385	!-- Inquire dimension ID
	386	DO j = 1, 4
	387	nc_stat = NF90_INQUIRE_DIMENSION( id_set(av), &
	388	id_dims(av,j), dimname, levels(av,i) )
	389	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 6 )
[1]	390
[108]	391	IF ( modus == 'XY' .AND. INDEX(dimname, 'z') /= 0 ) EXIT
	392	IF ( modus == 'XZ' .AND. INDEX(dimname, 'y') /= 0 ) EXIT
	393	IF ( modus == 'YZ' .AND. INDEX(dimname, 'x') /= 0 ) EXIT
	394	ENDDO
	395
[1]	396	ENDDO
	397
[108]	398	ENDDO ! av = 0, 1
[1]	399
[179]	400	#endif
[108]	401	ENDIF
[1]	402
	403	!
[108]	404	!-- Read the arrays, as long as the end of the file is reached
[493]	405	IF ( .NOT. netcdf_parallel ) THEN
[1]	406
[493]	407	fanz = 0
	408	current_level = 1
	409	current_var = 999999999
[1]	410
[493]	411	DO WHILE ( danz /= 0 )
	412
[1]	413	!
[493]	414	!-- Loop over all files (reading data of the subdomains)
	415	DO id = 0, danz-1
[1]	416	!
[493]	417	!-- File from PE0 contains special information at the beginning,
	418	!-- concerning the lower and upper indices of the total-domain
[2512]	419	!-- used in PALM (nxa, nxe, nya, nye).
[493]	420	!-- Allocate necessary arrays, open the output file and write
	421	!-- the coordinate informations needed by ISO2D.
	422	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
[2512]	423
[493]	424	READ ( id+110 ) nxa, nxe, nya, nye
[2512]	425	ALLOCATE ( pf(nxa:nxe,nya:nye) )
[1551]	426	!
	427	!-- Set actual domain bounds to total domain
	428	ya_do = nya
	429	ye_do = nye
	430
[108]	431	ENDIF
[1]	432	!
[493]	433	!-- Read output time
	434	IF ( netcdf_output .AND. id == 0 ) THEN
[2512]	435	READ ( id+110, END=998 ) simulated_time, time_step, av
[108]	436	ENDIF
[1]	437	!
[493]	438	!-- Read subdomain indices
[1551]	439	READ ( id+110, END=998 ) xa, xe, ya, ye, ya_tot, ye_tot
	440
[1]	441	!
[493]	442	!-- IF the PE made no output (in case that no part of the
	443	!-- cross-section is situated on this PE), indices have the
	444	!-- value -1
	445	IF ( .NOT. ( xa == -1 .AND. xe == -1 .AND. &
	446	ya == -1 .AND. ye == -1 ) ) THEN
[1551]	447
	448
[1]	449	!
[493]	450	!-- Read the subdomain grid-point values
	451	ALLOCATE( pf_tmp(xa:xe,ya:ye) )
	452	READ ( id+110 ) pf_tmp
[1551]	453	!
	454	!-- Calculate indices on atmospheric grid (e.g. for soil model
	455	!-- quantities)
	456	IF ( ya /= ya_tot .OR. ye /= ye_tot ) THEN
	457	ye_do = ye - ya
	458	ya_do = ya
	459	pf(xa:xe,ya_do:ye_do) = pf_tmp
	460	ELSE
	461	ye_do = nye
	462	ya_do = nya
	463	pf(xa:xe,ya:ye) = pf_tmp
	464	ENDIF
	465
[493]	466	DEALLOCATE( pf_tmp )
	467	ENDIF
	468	IF ( id == 0 ) fanz(av) = fanz(av) + 1
[1]	469
[493]	470	ENDDO
[1]	471	!
[2512]	472	!-- Write data in NetCDF format
[493]	473	IF ( netcdf_output ) THEN
[1]	474	#if defined( __netcdf )
	475	!
[493]	476	!-- Check if a new time step has begun; if yes write data to
	477	!-- time axis
	478	IF ( current_var(av) > num_var(av) ) THEN
	479	current_var(av) = 1
	480	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
	481	(/ simulated_time /), &
	482	start = (/ time_step /), &
	483	count = (/ 1 /) )
	484	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 7 )
	485	ENDIF
[1]	486
	487	!
[493]	488	!-- Now write the data; this is mode dependent
	489	SELECT CASE ( modus )
[1]	490
[493]	491	CASE ( 'XY' )
	492	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	493	id_var(av,current_var(av)), &
	494	pf(nxa:nxe,nya:nye), &
	495	start = (/ 1, 1, current_level(av), time_step /), &
	496	count = (/ nxe-nxa+1, nye-nya+1, 1, 1 /) )
[493]	497	IF ( nc_stat /= NF90_NOERR ) THEN
	498	CALL handle_netcdf_error( 8 )
	499	ENDIF
[1]	500
[493]	501	CASE ( 'XZ' )
	502	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	503	id_var(av,current_var(av)), &
[1551]	504	pf(nxa:nxe,ya_do:ye_do), &
[1]	505	start = (/ 1, current_level(av), 1, time_step /), &
[1551]	506	count = (/ nxe-nxa+1, 1, ye_do-ya_do+1, 1 /) )
[493]	507	IF ( nc_stat /= NF90_NOERR ) THEN
	508	CALL handle_netcdf_error( 9 )
	509	ENDIF
[1]	510
[493]	511	CASE ( 'YZ' )
	512	nc_stat = NF90_PUT_VAR( id_set(av), &
[1]	513	id_var(av,current_var(av)), &
[1551]	514	pf(nxa:nxe,ya_do:ye_do), &
[1]	515	start = (/ current_level(av), 1, 1, time_step /), &
[1551]	516	count = (/ 1, nxe-nxa+1, ye_do-ya_do+1, 1 /) )
[493]	517	IF ( nc_stat /= NF90_NOERR ) THEN
	518	CALL handle_netcdf_error( 10 )
	519	ENDIF
[1]	520
[493]	521	END SELECT
[1]	522
	523	!
[493]	524	!-- Data is written, check if max level is reached
	525	current_level(av) = current_level(av) + 1
	526	IF ( current_level(av) > levels(av,current_var(av)) ) THEN
	527	current_level(av) = 1
	528	current_var(av) = current_var(av) + 1
	529	ENDIF
[108]	530
[179]	531	#endif
[493]	532	ENDIF
[1]	533
[493]	534	ENDDO
[1]	535
[493]	536	ENDIF
	537
	538	998 IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
[1]	539	!
[108]	540	!-- Print the number of the arrays processed
	541	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
	542	IF ( fanz(1) /= 0 ) THEN
	543	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
	544	ENDIF
[1]	545
	546	!
[108]	547	!-- Close all files and deallocate arrays
	548	DO id = 0, danz-1
	549	CLOSE ( id+110 )
	550	ENDDO
	551	CLOSE ( 2 )
[2512]	552	DEALLOCATE ( pf )
[1]	553
	554	!
[493]	555	!-- Close the NetCDF file
	556	IF ( netcdf_output ) THEN
[1]	557	#if defined( __netcdf )
[493]	558	IF ( netcdf_0 ) THEN
	559	nc_stat = NF90_CLOSE( id_set(0) )
	560	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 11 )
	561	ENDIF
	562	IF ( netcdf_1 ) THEN
	563	nc_stat = NF90_CLOSE( id_set(1) )
	564	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 12 )
	565	ENDIF
	566	#endif
[108]	567	ENDIF
[493]	568	ENDIF
	569
	570	!
	571	!-- Output required cpu time
	572	IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
	573	CALL SYSTEM_CLOCK( count, count_rate )
	574	cpu_end_time = REAL( count ) / REAL( count_rate )
	575	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
	576	cpu_end_time-cpu_start_time, ' sec'
[1]	577	ENDIF
	578
	579	!
[108]	580	!-- Choose the next cross-section
	581	SELECT CASE ( modus )
	582	CASE ( 'XY' )
	583	modus = 'XZ'
	584	CASE ( 'XZ' )
	585	modus = 'YZ'
	586	CASE ( 'YZ' )
	587	modus = 'no'
	588	END SELECT
[1]	589
[108]	590	ENDDO
[1]	591
	592
	593	!
[108]	594	!-- Combine the 3D-arrays
[493]	595	netcdf_parallel = .FALSE.
[1]	596
	597	!
[493]	598	!-- Info-output
	599	PRINT*, ' '
	600
	601	!
	602	!-- Take current time
	603	CALL SYSTEM_CLOCK( count, count_rate )
	604	cpu_start_time = REAL( count ) / REAL( count_rate )
	605
	606	!
[108]	607	!-- Inquire whether a NetCDF file exists
	608	INQUIRE( FILE='DATA_3D_NETCDF'//TRIM( model_string ), EXIST=netcdf_0 )
[1]	609
	610	!
[108]	611	!-- Inquire whether a NetCDF file for time-averaged data exists
	612	INQUIRE( FILE='DATA_3D_AV_NETCDF'//TRIM( model_string ), EXIST=netcdf_1 )
[1]	613
[108]	614	IF ( netcdf_0 .OR. netcdf_1 ) THEN
	615	netcdf_output = .TRUE.
[493]	616	!
	617	!-- Inquire whether the NetCDF file is already complete (parallel output)
	618	INQUIRE( FILE='NO_COMBINE_PLOT_FIELDS_3D', EXIST=netcdf_parallel )
	619	IF ( netcdf_parallel ) THEN
	620	netcdf_parallel = .TRUE.
	621	ELSE
	622	netcdf_parallel = .FALSE.
	623	ENDIF
[108]	624	ELSE
	625	netcdf_output = .FALSE.
	626	ENDIF
[1]	627
	628	!
[493]	629	!-- Check, if file from PE0 exists; not neccessary in case of parallel
	630	!-- PALM output
	631	IF ( .NOT. netcdf_parallel ) THEN
	632	danz = 0
[1468]	633	WRITE (id_string,'(I6.6)') danz
[493]	634	INQUIRE ( &
	635	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM( id_string ), &
	636	EXIST=found )
	637	ELSE
	638	found = .FALSE.
	639	ENDIF
[1]	640
	641	!
[108]	642	!-- Find out the number of files and open them
[2512]	643	DO WHILE ( found )
[1]	644
[108]	645	OPEN ( danz+110, &
	646	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
	647	FORM='UNFORMATTED')
	648	danz = danz + 1
[1468]	649	WRITE (id_string,'(I6.6)') danz
[108]	650	INQUIRE ( &
	651	FILE='PLOT3D_DATA'//TRIM( model_string )//'_'//TRIM(id_string), &
	652	EXIST=found )
[1]	653
[108]	654	ENDDO
[1]	655
	656	#if defined( __netcdf )
[493]	657	IF ( netcdf_output ) THEN
	658	IF ( netcdf_parallel ) THEN
	659	PRINT*, ' NetCDF data are in one file (NetCDF4-format)', &
	660	' - merging not neccessary'
	661	ELSE
	662	PRINT*, ' NetCDF output enabled'
	663	ENDIF
	664	ENDIF
[1]	665	#else
	666	IF ( netcdf_output ) THEN
	667	PRINT*, '--- Sorry, no NetCDF support on this host'
	668	netcdf_output = .FALSE.
	669	ENDIF
	670	#endif
[493]	671	IF ( .NOT. netcdf_parallel ) THEN
	672	IF ( danz /= 0 ) THEN
	673	PRINT*, ' 3D-data: ', danz, ' file(s) found'
[108]	674	ELSE
[2512]	675	PRINT*, ' no 3D-data file available'
[108]	676	ENDIF
[1]	677	ENDIF
	678
[493]	679	IF ( netcdf_output .AND. .NOT. netcdf_parallel .AND. danz /= 0 ) THEN
[1]	680	#if defined( __netcdf )
[108]	681	DO av = 0, 1
[1]	682
[108]	683	IF ( av == 0 .AND. .NOT. netcdf_0 ) CYCLE
	684	IF ( av == 1 .AND. .NOT. netcdf_1 ) CYCLE
[1]	685
	686	!
[108]	687	!-- Open NetCDF dataset
	688	IF ( av == 0 ) THEN
	689	filename = 'DATA_3D_NETCDF'//TRIM( model_string )
	690	ELSE
	691	filename = 'DATA_3D_AV_NETCDF'//TRIM( model_string )
	692	ENDIF
	693	nc_stat = NF90_OPEN( filename, NF90_WRITE, id_set(av) )
	694	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 13 )
[1]	695
	696
	697	!
[108]	698	!-- Get the list of variables (order of variables corresponds with the
	699	!-- order of data on the binary file)
	700	var_list(av) = ' ' ! GET_ATT does not assign trailing blanks
	701	nc_stat = NF90_GET_ATT( id_set(av), NF90_GLOBAL, 'VAR_LIST', &
	702	var_list(av) )
	703	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 14 )
[1]	704
	705	!
[108]	706	!-- Inquire id of the time coordinate variable
	707	nc_stat = NF90_INQ_VARID( id_set(av), 'time', id_var_time(av) )
	708	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 15 )
[1]	709
	710	!
[108]	711	!-- Count number of variables; there is one more semicolon in the
	712	!-- string than variable names
	713	num_var(av) = -1
	714	DO i = 1, LEN( var_list(av) )
	715	IF ( var_list(av)(i:i) == ';' ) num_var(av) = num_var(av) + 1
	716	ENDDO
[1]	717
	718	!
[108]	719	!-- Extract the variable names from the list and inquire their NetCDF
	720	!-- IDs
	721	pos = INDEX( var_list(av), ';' )
[1]	722	!
[108]	723	!-- Loop over all variables
	724	DO i = 1, num_var(av)
[1]	725
	726	!
[108]	727	!-- Extract variable name from list
	728	var_list(av) = var_list(av)(pos+1:)
	729	pos = INDEX( var_list(av), ';' )
	730	var_name = var_list(av)(1:pos-1)
[1]	731
	732	!
[108]	733	!-- Get variable ID from name
	734	nc_stat = NF90_INQ_VARID( id_set(av), TRIM( var_name ), &
	735	id_var(av,i) )
	736	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 16 )
[1]	737
[108]	738	ENDDO
[1]	739
[108]	740	ENDDO ! av=0,1
[1]	741
[179]	742	#endif
[108]	743	ENDIF
[1]	744
	745	!
[108]	746	!-- Read arrays, until the end of the file is reached
[493]	747	IF ( .NOT. netcdf_parallel ) THEN
[1]	748
[493]	749	current_var = 999999999
	750	fanz = 0
	751	DO WHILE ( danz /= 0 )
	752
[1]	753	!
[493]	754	!-- Loop over all files
	755	DO id = 0, danz-1
[1]	756	!
[2512]	757	!-- File from PE0 contains at the beginning the index bounds
	758	!-- of PALM's total domain.
	759	!-- Allocate the array for storing the total domain data
[493]	760	IF ( id == 0 .AND. fanz(0) == 0 .AND. fanz(1) == 0 ) THEN
	761	READ ( id+110 ) nxa, nxe, nya, nye, nza, nze
	762	ALLOCATE ( pf3d(nxa:nxe,nya:nye,nza:nze) )
[108]	763	ENDIF
[1]	764
	765	!
[493]	766	!-- Read output time
	767	IF ( netcdf_output .AND. id == 0 ) THEN
	768	IF ( netcdf_1 ) THEN
	769	READ ( id+110, END=999 ) simulated_time, time_step, av
	770	ELSE
[1]	771	!
[493]	772	!-- For compatibility with earlier PALM versions
	773	READ ( id+110, END=999 ) simulated_time, time_step
	774	av = 0
	775	ENDIF
[108]	776	ENDIF
[1]	777
	778	!
[493]	779	!-- Read subdomain indices and grid point values
	780	READ ( id+110, END=999 ) xa, xe, ya, ye, za, ze
	781	ALLOCATE( pf3d_tmp(xa:xe,ya:ye,za:ze) )
	782	READ ( id+110 ) pf3d_tmp
[210]	783
[493]	784	xxa = MAX( nxa, xa )
	785	xxe = MIN( nxe, xe )
	786	yya = MAX( nya, ya )
	787	yye = MIN( nye, ye )
[1551]	788	DO k = za, ze
[493]	789	DO j = yya, yye
	790	DO i = xxa, xxe
	791	pf3d(i,j,k) = pf3d_tmp(i,j,k)
	792	ENDDO
[210]	793	ENDDO
	794	ENDDO
	795
[493]	796	DEALLOCATE( pf3d_tmp )
	797	IF ( id == 0 ) fanz(av) = fanz(av) + 1
[1]	798
[493]	799	ENDDO
[1]	800
	801	!
[2512]	802	!-- Write data of the total domain in NetCDF format
[493]	803	IF ( netcdf_output ) THEN
[1]	804	#if defined( __netcdf )
	805	!
[493]	806	!-- Check if a new time step has begun; if yes write data to time
	807	!-- axis
	808	IF ( current_var(av) > num_var(av) ) THEN
	809	current_var(av) = 1
	810	nc_stat = NF90_PUT_VAR( id_set(av), id_var_time(av), &
	811	(/ simulated_time /),&
	812	start = (/ time_step /), count = (/ 1 /) )
	813	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 17 )
	814	ENDIF
[1]	815
	816	!
[493]	817	!-- Now write the data
	818	nc_stat = NF90_PUT_VAR( id_set(av), id_var(av,current_var(av)),&
[1551]	819	pf3d(nxa:nxe,nya:nye,za:ze), start = (/ 1, 1, 1, time_step /),&
	820	count = (/ nxe-nxa+1, nye-nya+1, ze-za+1, 1 /) )
[493]	821	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 18 )
[1]	822
[493]	823	current_var(av) = current_var(av) + 1
[1]	824
	825	#endif
[493]	826	ENDIF
[1]	827
[493]	828	ENDDO
[1]	829
[493]	830	ENDIF
	831
	832	999 IF ( danz /= 0 .AND. .NOT. netcdf_parallel ) THEN
[1]	833	!
[108]	834	!-- Print the number of arrays processed
	835	WRITE (*,'(16X,I4,A)') fanz(0)+fanz(1), ' array(s) processed'
	836	IF ( fanz(1) /= 0 ) THEN
	837	WRITE (*,'(16X,I4,A)') fanz(1), ' array(s) are time-averaged'
	838	ENDIF
[1]	839	!
[108]	840	!-- Close all files and deallocate array
	841	DO id = 0, danz-1
	842	CLOSE ( id+110 )
	843	ENDDO
	844	CLOSE ( 2 )
	845	DEALLOCATE ( pf3d )
[1]	846	!
[108]	847	!-- Close the NetCDF file
	848	IF ( netcdf_output ) THEN
[1]	849	#if defined( __netcdf )
[108]	850	IF ( netcdf_0 ) THEN
	851	nc_stat = NF90_CLOSE( id_set(0) )
	852	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 19 )
	853	ENDIF
	854	IF ( netcdf_1 ) THEN
	855	nc_stat = NF90_CLOSE( id_set(1) )
	856	IF ( nc_stat /= NF90_NOERR ) CALL handle_netcdf_error( 20 )
	857	ENDIF
	858	#endif
[1]	859	ENDIF
[493]	860
	861	!
	862	!-- Output required cpu time
	863	CALL SYSTEM_CLOCK( count, count_rate )
	864	cpu_end_time = REAL( count ) / REAL( count_rate )
	865	WRITE (*,'(5X,A,F9.3,A)') 'Required cpu-time: ', &
	866	cpu_end_time-cpu_start_time, ' sec'
	867
[1]	868	ENDIF
	869
[108]	870	ENDDO ! models
[1]	871
[108]	872
[1]	873	CONTAINS
	874
	875
	876	SUBROUTINE handle_netcdf_error( errno )
	877	!
	878	!-- Prints out a text message corresponding to the current NetCDF status
	879
	880	IMPLICIT NONE
	881
	882	INTEGER, INTENT(IN) :: errno
	883
[179]	884	#if defined( __netcdf )
[1]	885	IF ( nc_stat /= NF90_NOERR ) THEN
	886	PRINT*, '+++ combine_plot_fields netcdf: ', av, errno, &
	887	TRIM( nf90_strerror( nc_stat ) )
	888	ENDIF
[179]	889	#endif
[1]	890
	891	END SUBROUTINE handle_netcdf_error
	892
	893
	894	END PROGRAM combine_plot_fields
	895
	896
	897

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |