Home

Context Navigation

source: palm/trunk/SOURCE/sum_up_3d_data.f90 @ 2969

Last change on this file since 2969 was 2963, checked in by suehring, 7 years ago
Minor revision of static input file checks, bugfix in initialization of surface-fractions in LSM; minor bugfix in initialization of albedo at window-surfaces; for clearer access of albedo and emissivity introduce index for vegetation/wall, pavement/green-wall and water/window surfaces
Property svn:keywords set to `Id`
File size: 37.7 KB

Rev	Line
[1682]	1	!> @file sum_up_3d_data.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[484]	20	! Current revisions:
[1]	21	! -----------------
[1360]	22	!
[2233]	23	!
[1321]	24	! Former revisions:
	25	! -----------------
	26	! $Id: sum_up_3d_data.f90 2963 2018-04-12 14:47:44Z thiele $
[2963]	27	! Introduce index for vegetation/wall, pavement/green-wall and water/window
	28	! surfaces, for clearer access of surface fraction, albedo, emissivity, etc. .
	29	!
	30	! 2894 2018-03-15 09:17:58Z Giersch
[2894]	31	! Changed comment
	32	!
	33	! 2817 2018-02-19 16:32:21Z suehring
[2817]	34	! Preliminary gust module interface implemented
	35	!
	36	! 2798 2018-02-09 17:16:39Z suehring
[2798]	37	! Consider also default-type surfaces for surface temperature output.
	38	!
	39	! 2797 2018-02-08 13:24:35Z suehring
[2797]	40	! Enable output of ground-heat flux also at urban surfaces.
	41	!
	42	! 2790 2018-02-06 11:57:19Z suehring
[2790]	43	! Bugfix in summation of surface sensible and latent heat flux
	44	!
	45	! 2766 2018-01-22 17:17:47Z kanani
[2766]	46	! Removed preprocessor directive __chem
	47	!
	48	! 2743 2018-01-12 16:03:39Z suehring
[2743]	49	! In case of natural- and urban-type surfaces output surfaces fluxes in W/m2.
	50	!
	51	! 2742 2018-01-12 14:59:47Z suehring
[2742]	52	! Enable output of surface temperature
	53	!
	54	! 2735 2018-01-11 12:01:27Z suehring
[2735]	55	! output of r_a moved from land-surface to consider also urban-type surfaces
	56	!
	57	! 2718 2018-01-02 08:49:38Z maronga
[2716]	58	! Corrected "Former revisions" section
	59	!
	60	! 2696 2017-12-14 17:12:51Z kanani
	61	! - Change in file header (GPL part)
[2696]	62	! - Implementation of uv exposure model (FK)
	63	! - output of diss_av, kh_av, km_av (turbulence_closure_mod) (TG)
	64	! - Implementation of chemistry module (FK)
	65	! - Workaround for sum-up usm arrays in case of restart runs, to avoid program
	66	! crash (MS)
	67	!
	68	! 2292 2017-06-20 09:51:42Z schwenkel
[2292]	69	! Implementation of new microphysic scheme: cloud_scheme = 'morrison'
	70	! includes two more prognostic equations for cloud drop concentration (nc)
	71	! and cloud water content (qc).
	72	!
	73	! 2233 2017-05-30 18:08:54Z suehring
[1321]	74	!
[2233]	75	! 2232 2017-05-30 17:47:52Z suehring
	76	! Adjustments to new surface concept
	77	!
[2032]	78	! 2031 2016-10-21 15:11:58Z knoop
	79	! renamed variable rho to rho_ocean and rho_av to rho_ocean_av
	80	!
[2025]	81	! 2024 2016-10-12 16:42:37Z kanani
	82	! Added missing CASE for ssws*
	83	!
[2012]	84	! 2011 2016-09-19 17:29:57Z kanani
	85	! Flag urban_surface is now defined in module control_parameters,
	86	! changed prefix for urban surface model output to "usm_",
	87	! introduced control parameter varnamelength for LEN of trimvar.
	88	!
[2008]	89	! 2007 2016-08-24 15:47:17Z kanani
	90	! Added support for new urban surface model (temporary modifications of
	91	! SELECT CASE ( ) necessary, see variable trimvar),
	92	! added comments in variable declaration section
	93	!
[2001]	94	! 2000 2016-08-20 18:09:15Z knoop
	95	! Forced header and separation lines into 80 columns
	96	!
[1993]	97	! 1992 2016-08-12 15:14:59Z suehring
	98	! Bugfix in summation of passive scalar
	99	!
[1977]	100	! 1976 2016-07-27 13:28:04Z maronga
	101	! Radiation actions are now done directly in the respective module
	102	!
[1973]	103	! 1972 2016-07-26 07:52:02Z maronga
	104	! Land surface actions are now done directly in the respective module
	105	!
[1961]	106	! 1960 2016-07-12 16:34:24Z suehring
	107	! Scalar surface flux added
	108	!
[1950]	109	! 1949 2016-06-17 07:19:16Z maronga
	110	! Bugfix: calculation of lai_av, c_veg_av and c_liq_av.
	111	!
[1851]	112	! 1849 2016-04-08 11:33:18Z hoffmann
	113	! precipitation_rate moved to arrays_3d
[1852]	114	!
[1789]	115	! 1788 2016-03-10 11:01:04Z maronga
	116	! Added z0q and z0q_av
	117	!
[1694]	118	! 1693 2015-10-27 08:35:45Z maronga
	119	! Last revision text corrected
	120	!
[1692]	121	! 1691 2015-10-26 16:17:44Z maronga
	122	! Added output of Obukhov length and radiative heating rates for RRTMG.
[1693]	123	! Corrected output of liquid water path.
[1692]	124	!
[1683]	125	! 1682 2015-10-07 23:56:08Z knoop
	126	! Code annotations made doxygen readable
	127	!
[1586]	128	! 1585 2015-04-30 07:05:52Z maronga
	129	! Adapted for RRTMG
	130	!
[1556]	131	! 1555 2015-03-04 17:44:27Z maronga
	132	! Added output of r_a and r_s
	133	!
[1552]	134	! 1551 2015-03-03 14:18:16Z maronga
	135	! Added support for land surface model and radiation model data.
	136	!
[1360]	137	! 1359 2014-04-11 17:15:14Z hoffmann
	138	! New particle structure integrated.
	139	!
[1354]	140	! 1353 2014-04-08 15:21:23Z heinze
	141	! REAL constants provided with KIND-attribute
	142	!
[1321]	143	! 1320 2014-03-20 08:40:49Z raasch
[1320]	144	! ONLY-attribute added to USE-statements,
	145	! kind-parameters added to all INTEGER and REAL declaration statements,
	146	! kinds are defined in new module kinds,
	147	! old module precision_kind is removed,
	148	! revision history before 2012 removed,
	149	! comment fields (!:) to be used for variable explanations added to
	150	! all variable declaration statements
[1]	151	!
[1319]	152	! 1318 2014-03-17 13:35:16Z raasch
	153	! barrier argument removed from cpu_log,
	154	! module interfaces removed
	155	!
[1116]	156	! 1115 2013-03-26 18:16:16Z hoffmann
	157	! ql is calculated by calc_liquid_water_content
	158	!
[1054]	159	! 1053 2012-11-13 17:11:03Z hoffmann
	160	! +nr, prr, qr
	161	!
[1037]	162	! 1036 2012-10-22 13:43:42Z raasch
	163	! code put under GPL (PALM 3.9)
	164	!
[1008]	165	! 1007 2012-09-19 14:30:36Z franke
	166	! Bugfix in calculation of ql_vp
	167	!
[979]	168	! 978 2012-08-09 08:28:32Z fricke
	169	! +z0h*
	170	!
[1]	171	! Revision 1.1 2006/02/23 12:55:23 raasch
	172	! Initial revision
	173	!
	174	!
	175	! Description:
	176	! ------------
[1682]	177	!> Sum-up the values of 3d-arrays. The real averaging is later done in routine
	178	!> average_3d_data.
[1]	179	!------------------------------------------------------------------------------!
[1682]	180	SUBROUTINE sum_up_3d_data
	181
[1]	182
[1320]	183	USE arrays_3d, &
[2743]	184	ONLY: dzw, e, heatflux_output_conversion, nc, nr, p, pt, &
	185	precipitation_rate, q, qc, ql, ql_c, &
	186	ql_v, qr, rho_ocean, s, sa, u, v, vpt, w, &
	187	waterflux_output_conversion
[1]	188
[1320]	189	USE averaging, &
[2797]	190	ONLY: diss_av, e_av, ghf_av, kh_av, km_av, lpt_av, lwp_av, nc_av, &
	191	nr_av, &
[2696]	192	ol_av, p_av, pc_av, pr_av, prr_av, precipitation_rate_av, pt_av,&
	193	q_av, qc_av, ql_av, ql_c_av, ql_v_av, ql_vp_av, qr_av, qsws_av, &
[2735]	194	qv_av, r_a_av, rho_ocean_av, s_av, sa_av, shf_av, ssws_av, &
[2742]	195	ts_av, tsurf_av, u_av, us_av, v_av, vpt_av, w_av, z0_av, z0h_av,&
	196	z0q_av
[2696]	197	USE chemistry_model_mod, &
	198	ONLY: chem_3d_data_averaging, chem_integrate, chem_species, nspec
[1320]	199
	200	USE cloud_parameters, &
[2743]	201	ONLY: cp, l_d_cp, l_v, pt_d_t
[1320]	202
	203	USE control_parameters, &
[2696]	204	ONLY: air_chemistry, average_count_3d, cloud_physics, doav, doav_n, &
	205	land_surface, rho_surface, urban_surface, uv_exposure, &
	206	varnamelength
[1320]	207
	208	USE cpulog, &
	209	ONLY: cpu_log, log_point
	210
[2817]	211	USE gust_mod, &
	212	ONLY: gust_3d_data_averaging, gust_module_enabled
	213
[1320]	214	USE indices, &
	215	ONLY: nxl, nxlg, nxr, nxrg, nyn, nyng, nys, nysg, nzb, nzt
	216
	217	USE kinds
	218
[1551]	219	USE land_surface_model_mod, &
[2232]	220	ONLY: lsm_3d_data_averaging
[1551]	221
[1320]	222	USE particle_attributes, &
[1359]	223	ONLY: grid_particles, number_of_particles, particles, prt_count
[1320]	224
[1551]	225	USE radiation_model_mod, &
[1976]	226	ONLY: radiation, radiation_3d_data_averaging
[1551]	227
[2232]	228	USE surface_mod, &
[2963]	229	ONLY: ind_pav_green, ind_veg_wall, ind_wat_win, &
	230	surf_def_h, surf_lsm_h, surf_usm_h
[2232]	231
[2696]	232	USE turbulence_closure_mod, &
	233	ONLY: tcm_3d_data_averaging
	234
[2007]	235	USE urban_surface_mod, &
[2011]	236	ONLY: usm_average_3d_data
[1691]	237
[2696]	238	USE uv_exposure_model_mod, &
	239	ONLY: uvem_3d_data_averaging
[2007]	240
[2696]	241
[1]	242	IMPLICIT NONE
	243
[2232]	244	INTEGER(iwp) :: i !< grid index x direction
[2007]	245	INTEGER(iwp) :: ii !< running index
[2232]	246	INTEGER(iwp) :: j !< grid index y direction
	247	INTEGER(iwp) :: k !< grid index x direction
	248	INTEGER(iwp) :: m !< running index surface type
[1682]	249	INTEGER(iwp) :: n !<
[1]	250
[1682]	251	REAL(wp) :: mean_r !<
	252	REAL(wp) :: s_r2 !<
	253	REAL(wp) :: s_r3 !<
[1]	254
[2011]	255	CHARACTER (LEN=varnamelength) :: trimvar !< TRIM of output-variable string
[2007]	256
	257
[1]	258	CALL cpu_log (log_point(34),'sum_up_3d_data','start')
	259
	260	!
	261	!-- Allocate and initialize the summation arrays if called for the very first
	262	!-- time or the first time after average_3d_data has been called
	263	!-- (some or all of the arrays may have been already allocated
[2894]	264	!-- in rrd_local)
[1]	265	IF ( average_count_3d == 0 ) THEN
	266
	267	DO ii = 1, doav_n
[2007]	268	!
	269	!-- Temporary solution to account for data output within the new urban
	270	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
	271	trimvar = TRIM( doav(ii) )
[2011]	272	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
[2007]	273	trimvar = 'usm_output'
	274	ENDIF
	275
	276	SELECT CASE ( trimvar )
[1]	277
[2797]	278	CASE ( 'ghf*' )
	279	IF ( .NOT. ALLOCATED( ghf_av ) ) THEN
	280	ALLOCATE( ghf_av(nysg:nyng,nxlg:nxrg) )
	281	ENDIF
	282	ghf_av = 0.0_wp
	283
[1]	284	CASE ( 'e' )
	285	IF ( .NOT. ALLOCATED( e_av ) ) THEN
[667]	286	ALLOCATE( e_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	287	ENDIF
[1353]	288	e_av = 0.0_wp
[1]	289
[771]	290	CASE ( 'lpt' )
	291	IF ( .NOT. ALLOCATED( lpt_av ) ) THEN
	292	ALLOCATE( lpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	293	ENDIF
[1353]	294	lpt_av = 0.0_wp
[771]	295
[1]	296	CASE ( 'lwp*' )
	297	IF ( .NOT. ALLOCATED( lwp_av ) ) THEN
[667]	298	ALLOCATE( lwp_av(nysg:nyng,nxlg:nxrg) )
[1]	299	ENDIF
[1353]	300	lwp_av = 0.0_wp
[1]	301
[2292]	302	CASE ( 'nc' )
	303	IF ( .NOT. ALLOCATED( nc_av ) ) THEN
	304	ALLOCATE( nc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	305	ENDIF
	306	nc_av = 0.0_wp
	307
[1053]	308	CASE ( 'nr' )
	309	IF ( .NOT. ALLOCATED( nr_av ) ) THEN
	310	ALLOCATE( nr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	311	ENDIF
[1353]	312	nr_av = 0.0_wp
[1053]	313
[1691]	314	CASE ( 'ol*' )
	315	IF ( .NOT. ALLOCATED( ol_av ) ) THEN
	316	ALLOCATE( ol_av(nysg:nyng,nxlg:nxrg) )
	317	ENDIF
	318	ol_av = 0.0_wp
	319
[1]	320	CASE ( 'p' )
	321	IF ( .NOT. ALLOCATED( p_av ) ) THEN
[667]	322	ALLOCATE( p_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	323	ENDIF
[1353]	324	p_av = 0.0_wp
[1]	325
	326	CASE ( 'pc' )
	327	IF ( .NOT. ALLOCATED( pc_av ) ) THEN
[667]	328	ALLOCATE( pc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	329	ENDIF
[1353]	330	pc_av = 0.0_wp
[1]	331
	332	CASE ( 'pr' )
	333	IF ( .NOT. ALLOCATED( pr_av ) ) THEN
[667]	334	ALLOCATE( pr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	335	ENDIF
[1353]	336	pr_av = 0.0_wp
[1]	337
[1053]	338	CASE ( 'prr' )
	339	IF ( .NOT. ALLOCATED( prr_av ) ) THEN
	340	ALLOCATE( prr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	341	ENDIF
[1353]	342	prr_av = 0.0_wp
[1053]	343
[72]	344	CASE ( 'prr*' )
	345	IF ( .NOT. ALLOCATED( precipitation_rate_av ) ) THEN
[667]	346	ALLOCATE( precipitation_rate_av(nysg:nyng,nxlg:nxrg) )
[72]	347	ENDIF
[1353]	348	precipitation_rate_av = 0.0_wp
[72]	349
[1]	350	CASE ( 'pt' )
	351	IF ( .NOT. ALLOCATED( pt_av ) ) THEN
[667]	352	ALLOCATE( pt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	353	ENDIF
[1353]	354	pt_av = 0.0_wp
[1]	355
	356	CASE ( 'q' )
	357	IF ( .NOT. ALLOCATED( q_av ) ) THEN
[667]	358	ALLOCATE( q_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	359	ENDIF
[1353]	360	q_av = 0.0_wp
[1]	361
[1115]	362	CASE ( 'qc' )
	363	IF ( .NOT. ALLOCATED( qc_av ) ) THEN
	364	ALLOCATE( qc_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	365	ENDIF
[1353]	366	qc_av = 0.0_wp
[1115]	367
[1]	368	CASE ( 'ql' )
	369	IF ( .NOT. ALLOCATED( ql_av ) ) THEN
[667]	370	ALLOCATE( ql_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	371	ENDIF
[1353]	372	ql_av = 0.0_wp
[1]	373
	374	CASE ( 'ql_c' )
	375	IF ( .NOT. ALLOCATED( ql_c_av ) ) THEN
[667]	376	ALLOCATE( ql_c_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	377	ENDIF
[1353]	378	ql_c_av = 0.0_wp
[1]	379
	380	CASE ( 'ql_v' )
	381	IF ( .NOT. ALLOCATED( ql_v_av ) ) THEN
[667]	382	ALLOCATE( ql_v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	383	ENDIF
[1353]	384	ql_v_av = 0.0_wp
[1]	385
	386	CASE ( 'ql_vp' )
	387	IF ( .NOT. ALLOCATED( ql_vp_av ) ) THEN
[667]	388	ALLOCATE( ql_vp_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	389	ENDIF
[1353]	390	ql_vp_av = 0.0_wp
[1]	391
[1053]	392	CASE ( 'qr' )
	393	IF ( .NOT. ALLOCATED( qr_av ) ) THEN
	394	ALLOCATE( qr_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	395	ENDIF
[1353]	396	qr_av = 0.0_wp
[1053]	397
[354]	398	CASE ( 'qsws*' )
	399	IF ( .NOT. ALLOCATED( qsws_av ) ) THEN
[667]	400	ALLOCATE( qsws_av(nysg:nyng,nxlg:nxrg) )
[354]	401	ENDIF
[1353]	402	qsws_av = 0.0_wp
[354]	403
[1]	404	CASE ( 'qv' )
	405	IF ( .NOT. ALLOCATED( qv_av ) ) THEN
[667]	406	ALLOCATE( qv_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	407	ENDIF
[1353]	408	qv_av = 0.0_wp
[1]	409
[2735]	410	CASE ( 'r_a*' )
	411	IF ( .NOT. ALLOCATED( r_a_av ) ) THEN
	412	ALLOCATE( r_a_av(nysg:nyng,nxlg:nxrg) )
	413	ENDIF
	414	r_a_av = 0.0_wp
	415
[2031]	416	CASE ( 'rho_ocean' )
	417	IF ( .NOT. ALLOCATED( rho_ocean_av ) ) THEN
	418	ALLOCATE( rho_ocean_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[96]	419	ENDIF
[2031]	420	rho_ocean_av = 0.0_wp
[96]	421
[1]	422	CASE ( 's' )
	423	IF ( .NOT. ALLOCATED( s_av ) ) THEN
[667]	424	ALLOCATE( s_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	425	ENDIF
[1353]	426	s_av = 0.0_wp
[1]	427
[96]	428	CASE ( 'sa' )
	429	IF ( .NOT. ALLOCATED( sa_av ) ) THEN
[667]	430	ALLOCATE( sa_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[96]	431	ENDIF
[1353]	432	sa_av = 0.0_wp
[96]	433
[354]	434	CASE ( 'shf*' )
	435	IF ( .NOT. ALLOCATED( shf_av ) ) THEN
[667]	436	ALLOCATE( shf_av(nysg:nyng,nxlg:nxrg) )
[354]	437	ENDIF
[1353]	438	shf_av = 0.0_wp
[2024]	439
	440	CASE ( 'ssws*' )
	441	IF ( .NOT. ALLOCATED( ssws_av ) ) THEN
	442	ALLOCATE( ssws_av(nysg:nyng,nxlg:nxrg) )
	443	ENDIF
	444	ssws_av = 0.0_wp
[354]	445
[1]	446	CASE ( 't*' )
	447	IF ( .NOT. ALLOCATED( ts_av ) ) THEN
[667]	448	ALLOCATE( ts_av(nysg:nyng,nxlg:nxrg) )
[1]	449	ENDIF
[1353]	450	ts_av = 0.0_wp
[1]	451
[2742]	452	CASE ( 'tsurf*' )
	453	IF ( .NOT. ALLOCATED( tsurf_av ) ) THEN
	454	ALLOCATE( tsurf_av(nysg:nyng,nxlg:nxrg) )
	455	ENDIF
	456	tsurf_av = 0.0_wp
	457
[1]	458	CASE ( 'u' )
	459	IF ( .NOT. ALLOCATED( u_av ) ) THEN
[667]	460	ALLOCATE( u_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	461	ENDIF
[1353]	462	u_av = 0.0_wp
[1]	463
	464	CASE ( 'u*' )
	465	IF ( .NOT. ALLOCATED( us_av ) ) THEN
[667]	466	ALLOCATE( us_av(nysg:nyng,nxlg:nxrg) )
[1]	467	ENDIF
[1353]	468	us_av = 0.0_wp
[1]	469
	470	CASE ( 'v' )
	471	IF ( .NOT. ALLOCATED( v_av ) ) THEN
[667]	472	ALLOCATE( v_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	473	ENDIF
[1353]	474	v_av = 0.0_wp
[1]	475
	476	CASE ( 'vpt' )
	477	IF ( .NOT. ALLOCATED( vpt_av ) ) THEN
[667]	478	ALLOCATE( vpt_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	479	ENDIF
[1353]	480	vpt_av = 0.0_wp
[1]	481
	482	CASE ( 'w' )
	483	IF ( .NOT. ALLOCATED( w_av ) ) THEN
[667]	484	ALLOCATE( w_av(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	485	ENDIF
[1353]	486	w_av = 0.0_wp
[1]	487
[72]	488	CASE ( 'z0*' )
	489	IF ( .NOT. ALLOCATED( z0_av ) ) THEN
[667]	490	ALLOCATE( z0_av(nysg:nyng,nxlg:nxrg) )
[72]	491	ENDIF
[1353]	492	z0_av = 0.0_wp
[72]	493
[978]	494	CASE ( 'z0h*' )
	495	IF ( .NOT. ALLOCATED( z0h_av ) ) THEN
	496	ALLOCATE( z0h_av(nysg:nyng,nxlg:nxrg) )
	497	ENDIF
[1353]	498	z0h_av = 0.0_wp
[978]	499
[1788]	500	CASE ( 'z0q*' )
	501	IF ( .NOT. ALLOCATED( z0q_av ) ) THEN
	502	ALLOCATE( z0q_av(nysg:nyng,nxlg:nxrg) )
	503	ENDIF
	504	z0q_av = 0.0_wp
[2007]	505	!
	506	!-- Block of urban surface model outputs
	507	CASE ( 'usm_output' )
[1788]	508
[2007]	509	CALL usm_average_3d_data( 'allocate', doav(ii) )
	510
	511
[1]	512	CASE DEFAULT
[1972]	513
[1]	514	!
[2696]	515	!-- Turbulence closure module
	516	CALL tcm_3d_data_averaging( 'allocate', doav(ii) )
	517
	518	!
[1972]	519	!-- Land surface quantity
	520	IF ( land_surface ) THEN
	521	CALL lsm_3d_data_averaging( 'allocate', doav(ii) )
	522	ENDIF
	523
	524	!
[1976]	525	!-- Radiation quantity
	526	IF ( radiation ) THEN
	527	CALL radiation_3d_data_averaging( 'allocate', doav(ii) )
	528	ENDIF
	529
	530	!
[2817]	531	!-- Gust module quantities
	532	IF ( gust_module_enabled ) THEN
	533	CALL gust_3d_data_averaging( 'allocate', doav(ii) )
	534	ENDIF
	535
	536	!
[2696]	537	!-- Chemical quantity
	538	#if defined( __chem )
	539	IF ( air_chemistry .AND. trimvar(1:3) == 'kc_') THEN
	540	CALL chem_3d_data_averaging( 'allocate', doav(ii) )
	541	ENDIF
	542	#endif
	543
	544	!
	545	!-- UV exposure quantity
	546	IF ( uv_exposure .AND. trimvar(1:5) == 'uvem_') THEN
	547	CALL uvem_3d_data_averaging( 'allocate', doav(ii) )
	548	ENDIF
	549
	550	!
[1]	551	!-- User-defined quantity
	552	CALL user_3d_data_averaging( 'allocate', doav(ii) )
	553
	554	END SELECT
	555
	556	ENDDO
	557
	558	ENDIF
	559
	560	!
	561	!-- Loop of all variables to be averaged.
	562	DO ii = 1, doav_n
	563	!
[2007]	564	!-- Temporary solution to account for data output within the new urban
	565	!-- surface model (urban_surface_mod.f90), see also SELECT CASE ( trimvar )
	566	trimvar = TRIM( doav(ii) )
[2011]	567	IF ( urban_surface .AND. trimvar(1:4) == 'usm_' ) THEN
[2007]	568	trimvar = 'usm_output'
	569	ENDIF
	570	!
[1]	571	!-- Store the array chosen on the temporary array.
[2007]	572	SELECT CASE ( trimvar )
[1]	573
[2797]	574	CASE ( 'ghf*' )
	575	DO m = 1, surf_lsm_h%ns
	576	i = surf_lsm_h%i(m)
	577	j = surf_lsm_h%j(m)
	578	ghf_av(j,i) = ghf_av(j,i) + surf_lsm_h%ghf(m)
	579	ENDDO
	580
	581	DO m = 1, surf_usm_h%ns
	582	i = surf_usm_h%i(m)
	583	j = surf_usm_h%j(m)
[2963]	584	ghf_av(j,i) = ghf_av(j,i) + surf_usm_h%frac(ind_veg_wall,m) * &
	585	surf_usm_h%wghf_eb(m) + &
	586	surf_usm_h%frac(ind_pav_green,m) * &
	587	surf_usm_h%wghf_eb_green(m) + &
	588	surf_usm_h%frac(ind_wat_win,m) * &
[2797]	589	surf_usm_h%wghf_eb_window(m)
	590	ENDDO
	591
[1]	592	CASE ( 'e' )
[667]	593	DO i = nxlg, nxrg
	594	DO j = nysg, nyng
[1]	595	DO k = nzb, nzt+1
	596	e_av(k,j,i) = e_av(k,j,i) + e(k,j,i)
	597	ENDDO
	598	ENDDO
	599	ENDDO
	600
[771]	601	CASE ( 'lpt' )
	602	DO i = nxlg, nxrg
	603	DO j = nysg, nyng
	604	DO k = nzb, nzt+1
	605	lpt_av(k,j,i) = lpt_av(k,j,i) + pt(k,j,i)
	606	ENDDO
	607	ENDDO
	608	ENDDO
	609
[1]	610	CASE ( 'lwp*' )
[667]	611	DO i = nxlg, nxrg
	612	DO j = nysg, nyng
[1691]	613	lwp_av(j,i) = lwp_av(j,i) + SUM( ql(nzb:nzt,j,i) &
	614	* dzw(1:nzt+1) ) * rho_surface
[1]	615	ENDDO
	616	ENDDO
	617
[2292]	618	CASE ( 'nc' )
	619	DO i = nxlg, nxrg
	620	DO j = nysg, nyng
	621	DO k = nzb, nzt+1
	622	nc_av(k,j,i) = nc_av(k,j,i) + nc(k,j,i)
	623	ENDDO
	624	ENDDO
	625	ENDDO
	626
[1053]	627	CASE ( 'nr' )
	628	DO i = nxlg, nxrg
	629	DO j = nysg, nyng
	630	DO k = nzb, nzt+1
	631	nr_av(k,j,i) = nr_av(k,j,i) + nr(k,j,i)
	632	ENDDO
	633	ENDDO
	634	ENDDO
	635
[1691]	636	CASE ( 'ol*' )
[2232]	637	DO m = 1, surf_def_h(0)%ns
	638	i = surf_def_h(0)%i(m)
	639	j = surf_def_h(0)%j(m)
	640	ol_av(j,i) = ol_av(j,i) + surf_def_h(0)%ol(m)
[1691]	641	ENDDO
[2232]	642	DO m = 1, surf_lsm_h%ns
	643	i = surf_lsm_h%i(m)
	644	j = surf_lsm_h%j(m)
	645	ol_av(j,i) = ol_av(j,i) + surf_lsm_h%ol(m)
	646	ENDDO
	647	DO m = 1, surf_usm_h%ns
	648	i = surf_usm_h%i(m)
	649	j = surf_usm_h%j(m)
	650	ol_av(j,i) = ol_av(j,i) + surf_usm_h%ol(m)
	651	ENDDO
[1691]	652
[1]	653	CASE ( 'p' )
[667]	654	DO i = nxlg, nxrg
	655	DO j = nysg, nyng
[1]	656	DO k = nzb, nzt+1
	657	p_av(k,j,i) = p_av(k,j,i) + p(k,j,i)
	658	ENDDO
	659	ENDDO
	660	ENDDO
	661
	662	CASE ( 'pc' )
	663	DO i = nxl, nxr
	664	DO j = nys, nyn
	665	DO k = nzb, nzt+1
	666	pc_av(k,j,i) = pc_av(k,j,i) + prt_count(k,j,i)
	667	ENDDO
	668	ENDDO
	669	ENDDO
	670
	671	CASE ( 'pr' )
	672	DO i = nxl, nxr
	673	DO j = nys, nyn
	674	DO k = nzb, nzt+1
[1359]	675	number_of_particles = prt_count(k,j,i)
	676	IF ( number_of_particles <= 0 ) CYCLE
	677	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
	678	s_r2 = 0.0_wp
[1353]	679	s_r3 = 0.0_wp
[1359]	680
	681	DO n = 1, number_of_particles
	682	IF ( particles(n)%particle_mask ) THEN
	683	s_r2 = s_r2 + particles(n)%radius*2 &
	684	particles(n)%weight_factor
	685	s_r3 = s_r3 + particles(n)%radius*3 &
	686	particles(n)%weight_factor
	687	ENDIF
[1]	688	ENDDO
[1359]	689
	690	IF ( s_r2 > 0.0_wp ) THEN
	691	mean_r = s_r3 / s_r2
[1]	692	ELSE
[1353]	693	mean_r = 0.0_wp
[1]	694	ENDIF
	695	pr_av(k,j,i) = pr_av(k,j,i) + mean_r
	696	ENDDO
	697	ENDDO
	698	ENDDO
	699
[1359]	700
[72]	701	CASE ( 'pr*' )
[667]	702	DO i = nxlg, nxrg
	703	DO j = nysg, nyng
[72]	704	precipitation_rate_av(j,i) = precipitation_rate_av(j,i) + &
	705	precipitation_rate(j,i)
	706	ENDDO
	707	ENDDO
	708
[1]	709	CASE ( 'pt' )
	710	IF ( .NOT. cloud_physics ) THEN
[667]	711	DO i = nxlg, nxrg
	712	DO j = nysg, nyng
	713	DO k = nzb, nzt+1
[1]	714	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i)
	715	ENDDO
	716	ENDDO
	717	ENDDO
	718	ELSE
[667]	719	DO i = nxlg, nxrg
	720	DO j = nysg, nyng
	721	DO k = nzb, nzt+1
[1]	722	pt_av(k,j,i) = pt_av(k,j,i) + pt(k,j,i) + l_d_cp * &
	723	pt_d_t(k) * ql(k,j,i)
	724	ENDDO
	725	ENDDO
	726	ENDDO
	727	ENDIF
	728
	729	CASE ( 'q' )
[667]	730	DO i = nxlg, nxrg
	731	DO j = nysg, nyng
[1]	732	DO k = nzb, nzt+1
	733	q_av(k,j,i) = q_av(k,j,i) + q(k,j,i)
	734	ENDDO
	735	ENDDO
	736	ENDDO
[402]	737
[1115]	738	CASE ( 'qc' )
	739	DO i = nxlg, nxrg
	740	DO j = nysg, nyng
	741	DO k = nzb, nzt+1
	742	qc_av(k,j,i) = qc_av(k,j,i) + qc(k,j,i)
	743	ENDDO
	744	ENDDO
	745	ENDDO
	746
[1]	747	CASE ( 'ql' )
[667]	748	DO i = nxlg, nxrg
	749	DO j = nysg, nyng
[1]	750	DO k = nzb, nzt+1
	751	ql_av(k,j,i) = ql_av(k,j,i) + ql(k,j,i)
	752	ENDDO
	753	ENDDO
	754	ENDDO
	755
	756	CASE ( 'ql_c' )
[667]	757	DO i = nxlg, nxrg
	758	DO j = nysg, nyng
[1]	759	DO k = nzb, nzt+1
	760	ql_c_av(k,j,i) = ql_c_av(k,j,i) + ql_c(k,j,i)
	761	ENDDO
	762	ENDDO
	763	ENDDO
	764
	765	CASE ( 'ql_v' )
[667]	766	DO i = nxlg, nxrg
	767	DO j = nysg, nyng
[1]	768	DO k = nzb, nzt+1
	769	ql_v_av(k,j,i) = ql_v_av(k,j,i) + ql_v(k,j,i)
	770	ENDDO
	771	ENDDO
	772	ENDDO
	773
	774	CASE ( 'ql_vp' )
[1007]	775	DO i = nxl, nxr
	776	DO j = nys, nyn
[1]	777	DO k = nzb, nzt+1
[1359]	778	number_of_particles = prt_count(k,j,i)
	779	IF ( number_of_particles <= 0 ) CYCLE
	780	particles => grid_particles(k,j,i)%particles(1:number_of_particles)
	781	DO n = 1, number_of_particles
	782	IF ( particles(n)%particle_mask ) THEN
	783	ql_vp_av(k,j,i) = ql_vp_av(k,j,i) + &
	784	particles(n)%weight_factor / &
	785	number_of_particles
	786	ENDIF
[1007]	787	ENDDO
[1]	788	ENDDO
	789	ENDDO
	790	ENDDO
	791
[1053]	792	CASE ( 'qr' )
	793	DO i = nxlg, nxrg
	794	DO j = nysg, nyng
	795	DO k = nzb, nzt+1
	796	qr_av(k,j,i) = qr_av(k,j,i) + qr(k,j,i)
	797	ENDDO
	798	ENDDO
	799	ENDDO
	800
[402]	801	CASE ( 'qsws*' )
[2743]	802	!
	803	!-- In case of default surfaces, clean-up flux by density.
	804	!-- In case of land- and urban-surfaces, convert fluxes into
	805	!-- dynamic units.
[2232]	806	DO m = 1, surf_def_h(0)%ns
	807	i = surf_def_h(0)%i(m)
	808	j = surf_def_h(0)%j(m)
[2790]	809	k = surf_def_h(0)%k(m)
[2743]	810	qsws_av(j,i) = qsws_av(j,i) + surf_def_h(0)%qsws(m) * &
	811	waterflux_output_conversion(k)
[402]	812	ENDDO
[2232]	813	DO m = 1, surf_lsm_h%ns
	814	i = surf_lsm_h%i(m)
	815	j = surf_lsm_h%j(m)
[2743]	816	qsws_av(j,i) = qsws_av(j,i) + surf_lsm_h%qsws(m) * l_v
[2232]	817	ENDDO
	818	DO m = 1, surf_usm_h%ns
	819	i = surf_usm_h%i(m)
	820	j = surf_usm_h%j(m)
[2743]	821	qsws_av(j,i) = qsws_av(j,i) + surf_usm_h%qsws(m) * l_v
[2232]	822	ENDDO
[402]	823
[1]	824	CASE ( 'qv' )
[667]	825	DO i = nxlg, nxrg
	826	DO j = nysg, nyng
[1]	827	DO k = nzb, nzt+1
	828	qv_av(k,j,i) = qv_av(k,j,i) + q(k,j,i) - ql(k,j,i)
	829	ENDDO
	830	ENDDO
	831	ENDDO
	832
[2735]	833	CASE ( 'r_a*' )
	834	DO m = 1, surf_lsm_h%ns
	835	i = surf_lsm_h%i(m)
	836	j = surf_lsm_h%j(m)
	837	r_a_av(j,i) = r_a_av(j,i) + surf_lsm_h%r_a(m)
	838	ENDDO
	839	!
	840	!-- Please note, resistance is also applied at urban-type surfaces,
	841	!-- and is output only as a single variable. Here, tile approach is
	842	!-- already implemented, so for each surface fraction resistance
	843	!-- need to be summed-up.
	844	DO m = 1, surf_usm_h%ns
	845	i = surf_usm_h%i(m)
	846	j = surf_usm_h%j(m)
	847	r_a_av(j,i) = r_a_av(j,i) + &
[2963]	848	( surf_usm_h%frac(ind_veg_wall,m) * &
	849	surf_usm_h%r_a(m) + &
	850	surf_usm_h%frac(ind_pav_green,m) * &
	851	surf_usm_h%r_a_green(m) + &
	852	surf_usm_h%frac(ind_wat_win,m) * &
	853	surf_usm_h%r_a_window(m) )
[2735]	854	ENDDO
	855
[2031]	856	CASE ( 'rho_ocean' )
[667]	857	DO i = nxlg, nxrg
	858	DO j = nysg, nyng
[96]	859	DO k = nzb, nzt+1
[2031]	860	rho_ocean_av(k,j,i) = rho_ocean_av(k,j,i) + rho_ocean(k,j,i)
[96]	861	ENDDO
	862	ENDDO
	863	ENDDO
[402]	864
[1]	865	CASE ( 's' )
[667]	866	DO i = nxlg, nxrg
	867	DO j = nysg, nyng
[1]	868	DO k = nzb, nzt+1
[1992]	869	s_av(k,j,i) = s_av(k,j,i) + s(k,j,i)
[1]	870	ENDDO
	871	ENDDO
	872	ENDDO
[402]	873
[96]	874	CASE ( 'sa' )
[667]	875	DO i = nxlg, nxrg
	876	DO j = nysg, nyng
[96]	877	DO k = nzb, nzt+1
	878	sa_av(k,j,i) = sa_av(k,j,i) + sa(k,j,i)
	879	ENDDO
	880	ENDDO
	881	ENDDO
[402]	882
	883	CASE ( 'shf*' )
[2743]	884	!
	885	!-- In case of default surfaces, clean-up flux by density.
	886	!-- In case of land- and urban-surfaces, convert fluxes into
	887	!-- dynamic units.
[2232]	888	DO m = 1, surf_def_h(0)%ns
	889	i = surf_def_h(0)%i(m)
	890	j = surf_def_h(0)%j(m)
[2790]	891	k = surf_def_h(0)%k(m)
[2743]	892	shf_av(j,i) = shf_av(j,i) + surf_def_h(0)%shf(m) * &
	893	heatflux_output_conversion(k)
[402]	894	ENDDO
[2232]	895	DO m = 1, surf_lsm_h%ns
	896	i = surf_lsm_h%i(m)
	897	j = surf_lsm_h%j(m)
[2743]	898	shf_av(j,i) = shf_av(j,i) + surf_lsm_h%shf(m) * cp
[2232]	899	ENDDO
	900	DO m = 1, surf_usm_h%ns
	901	i = surf_usm_h%i(m)
	902	j = surf_usm_h%j(m)
[2743]	903	shf_av(j,i) = shf_av(j,i) + surf_usm_h%shf(m) * cp
[2232]	904	ENDDO
[402]	905
[1960]	906	CASE ( 'ssws*' )
[2232]	907	DO m = 1, surf_def_h(0)%ns
	908	i = surf_def_h(0)%i(m)
	909	j = surf_def_h(0)%j(m)
	910	ssws_av(j,i) = ssws_av(j,i) + surf_def_h(0)%ssws(m)
[1960]	911	ENDDO
[2232]	912	DO m = 1, surf_lsm_h%ns
	913	i = surf_lsm_h%i(m)
	914	j = surf_lsm_h%j(m)
	915	ssws_av(j,i) = ssws_av(j,i) + surf_lsm_h%ssws(m)
	916	ENDDO
	917	DO m = 1, surf_usm_h%ns
	918	i = surf_usm_h%i(m)
	919	j = surf_usm_h%j(m)
	920	ssws_av(j,i) = ssws_av(j,i) + surf_usm_h%ssws(m)
	921	ENDDO
[1960]	922
[1]	923	CASE ( 't*' )
[2232]	924	DO m = 1, surf_def_h(0)%ns
	925	i = surf_def_h(0)%i(m)
	926	j = surf_def_h(0)%j(m)
	927	ts_av(j,i) = ts_av(j,i) + surf_def_h(0)%ts(m)
[1]	928	ENDDO
[2232]	929	DO m = 1, surf_lsm_h%ns
	930	i = surf_lsm_h%i(m)
	931	j = surf_lsm_h%j(m)
	932	ts_av(j,i) = ts_av(j,i) + surf_lsm_h%ts(m)
	933	ENDDO
	934	DO m = 1, surf_usm_h%ns
	935	i = surf_usm_h%i(m)
	936	j = surf_usm_h%j(m)
	937	ts_av(j,i) = ts_av(j,i) + surf_usm_h%ts(m)
	938	ENDDO
[1]	939
[2742]	940	CASE ( 'tsurf*' )
[2798]	941	DO m = 1, surf_def_h(0)%ns
	942	i = surf_def_h(0)%i(m)
	943	j = surf_def_h(0)%j(m)
	944	tsurf_av(j,i) = tsurf_av(j,i) + surf_def_h(0)%pt_surface(m)
	945	ENDDO
	946
[2742]	947	DO m = 1, surf_lsm_h%ns
	948	i = surf_lsm_h%i(m)
	949	j = surf_lsm_h%j(m)
	950	tsurf_av(j,i) = tsurf_av(j,i) + surf_lsm_h%pt_surface(m)
	951	ENDDO
	952
	953	DO m = 1, surf_usm_h%ns
	954	i = surf_usm_h%i(m)
	955	j = surf_usm_h%j(m)
	956	tsurf_av(j,i) = tsurf_av(j,i) + surf_usm_h%pt_surface(m)
	957	ENDDO
	958
[1]	959	CASE ( 'u' )
[667]	960	DO i = nxlg, nxrg
	961	DO j = nysg, nyng
[1]	962	DO k = nzb, nzt+1
	963	u_av(k,j,i) = u_av(k,j,i) + u(k,j,i)
	964	ENDDO
	965	ENDDO
	966	ENDDO
	967
	968	CASE ( 'u*' )
[2232]	969	DO m = 1, surf_def_h(0)%ns
	970	i = surf_def_h(0)%i(m)
	971	j = surf_def_h(0)%j(m)
	972	us_av(j,i) = us_av(j,i) + surf_def_h(0)%us(m)
[1]	973	ENDDO
[2232]	974	DO m = 1, surf_lsm_h%ns
	975	i = surf_lsm_h%i(m)
	976	j = surf_lsm_h%j(m)
	977	us_av(j,i) = us_av(j,i) + surf_lsm_h%us(m)
	978	ENDDO
	979	DO m = 1, surf_usm_h%ns
	980	i = surf_usm_h%i(m)
	981	j = surf_usm_h%j(m)
	982	us_av(j,i) = us_av(j,i) + surf_usm_h%us(m)
	983	ENDDO
[1]	984
	985	CASE ( 'v' )
[667]	986	DO i = nxlg, nxrg
	987	DO j = nysg, nyng
[1]	988	DO k = nzb, nzt+1
	989	v_av(k,j,i) = v_av(k,j,i) + v(k,j,i)
	990	ENDDO
	991	ENDDO
	992	ENDDO
	993
	994	CASE ( 'vpt' )
[667]	995	DO i = nxlg, nxrg
	996	DO j = nysg, nyng
[1]	997	DO k = nzb, nzt+1
	998	vpt_av(k,j,i) = vpt_av(k,j,i) + vpt(k,j,i)
	999	ENDDO
	1000	ENDDO
	1001	ENDDO
	1002
	1003	CASE ( 'w' )
[667]	1004	DO i = nxlg, nxrg
	1005	DO j = nysg, nyng
[1]	1006	DO k = nzb, nzt+1
	1007	w_av(k,j,i) = w_av(k,j,i) + w(k,j,i)
	1008	ENDDO
	1009	ENDDO
	1010	ENDDO
	1011
[72]	1012	CASE ( 'z0*' )
[2232]	1013	DO m = 1, surf_def_h(0)%ns
	1014	i = surf_def_h(0)%i(m)
	1015	j = surf_def_h(0)%j(m)
	1016	z0_av(j,i) = z0_av(j,i) + surf_def_h(0)%z0(m)
[72]	1017	ENDDO
[2232]	1018	DO m = 1, surf_lsm_h%ns
	1019	i = surf_lsm_h%i(m)
	1020	j = surf_lsm_h%j(m)
	1021	z0_av(j,i) = z0_av(j,i) + surf_lsm_h%z0(m)
	1022	ENDDO
	1023	DO m = 1, surf_usm_h%ns
	1024	i = surf_usm_h%i(m)
	1025	j = surf_usm_h%j(m)
	1026	z0_av(j,i) = z0_av(j,i) + surf_usm_h%z0(m)
	1027	ENDDO
[72]	1028
[978]	1029	CASE ( 'z0h*' )
[2232]	1030	DO m = 1, surf_def_h(0)%ns
	1031	i = surf_def_h(0)%i(m)
	1032	j = surf_def_h(0)%j(m)
	1033	z0h_av(j,i) = z0h_av(j,i) + surf_def_h(0)%z0h(m)
[978]	1034	ENDDO
[2232]	1035	DO m = 1, surf_lsm_h%ns
	1036	i = surf_lsm_h%i(m)
	1037	j = surf_lsm_h%j(m)
	1038	z0h_av(j,i) = z0h_av(j,i) + surf_lsm_h%z0h(m)
	1039	ENDDO
	1040	DO m = 1, surf_usm_h%ns
	1041	i = surf_usm_h%i(m)
	1042	j = surf_usm_h%j(m)
	1043	z0h_av(j,i) = z0h_av(j,i) + surf_usm_h%z0h(m)
	1044	ENDDO
[978]	1045
[1788]	1046	CASE ( 'z0q*' )
[2232]	1047	DO m = 1, surf_def_h(0)%ns
	1048	i = surf_def_h(0)%i(m)
	1049	j = surf_def_h(0)%j(m)
	1050	z0q_av(j,i) = z0q_av(j,i) + surf_def_h(0)%z0q(m)
[1788]	1051	ENDDO
[2232]	1052	DO m = 1, surf_lsm_h%ns
	1053	i = surf_lsm_h%i(m)
	1054	j = surf_lsm_h%j(m)
	1055	z0q_av(j,i) = z0q_av(j,i) + surf_lsm_h%z0q(m)
	1056	ENDDO
	1057	DO m = 1, surf_usm_h%ns
	1058	i = surf_usm_h%i(m)
	1059	j = surf_usm_h%j(m)
	1060	z0q_av(j,i) = z0q_av(j,i) + surf_usm_h%z0q(m)
	1061	ENDDO
[2007]	1062	!
[2696]	1063	!-- Block of urban surface model outputs.
	1064	!-- In case of urban surface variables it should be always checked
	1065	!-- if respective arrays are allocated, at least in case of a restart
	1066	!-- run, as usm arrays are not read from file at the moment.
[2007]	1067	CASE ( 'usm_output' )
[2696]	1068	CALL usm_average_3d_data( 'allocate', doav(ii) )
[2007]	1069	CALL usm_average_3d_data( 'sum', doav(ii) )
[1788]	1070
[1]	1071	CASE DEFAULT
	1072	!
[2696]	1073	!-- Turbulence closure module
	1074	CALL tcm_3d_data_averaging( 'sum', doav(ii) )
	1075
	1076	!
[1972]	1077	!-- Land surface quantity
	1078	IF ( land_surface ) THEN
	1079	CALL lsm_3d_data_averaging( 'sum', doav(ii) )
	1080	ENDIF
	1081
	1082	!
[1976]	1083	!-- Radiation quantity
	1084	IF ( radiation ) THEN
	1085	CALL radiation_3d_data_averaging( 'sum', doav(ii) )
	1086	ENDIF
	1087
	1088	!
[2817]	1089	!-- Gust module quantities
	1090	IF ( gust_module_enabled ) THEN
	1091	CALL gust_3d_data_averaging( 'sum', doav(ii) )
	1092	ENDIF
	1093
	1094	!
[2696]	1095	!-- Chemical quantity
	1096	IF ( air_chemistry .AND. trimvar(1:3) == 'kc_') THEN
	1097	CALL chem_3d_data_averaging( 'sum',doav(ii) )
	1098	ENDIF
	1099
	1100	!
	1101	!-- UV exposure quantity
	1102	IF ( uv_exposure ) THEN
	1103	CALL uvem_3d_data_averaging( 'sum', doav(ii) )
	1104	ENDIF
	1105
	1106	!
[1]	1107	!-- User-defined quantity
	1108	CALL user_3d_data_averaging( 'sum', doav(ii) )
	1109
	1110	END SELECT
	1111
	1112	ENDDO
	1113
[1318]	1114	CALL cpu_log( log_point(34), 'sum_up_3d_data', 'stop' )
[1]	1115
	1116
	1117	END SUBROUTINE sum_up_3d_data

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |