Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 324

Last change on this file since 324 was 291, checked in by raasch, 16 years ago
changes for coupling with independent precursor runs; z_i calculation with Sullivan criterion
Property svn:keywords set to `Id`
File size: 30.0 KB

Rev	Line
[1]	1	SUBROUTINE read_var_list
	2
	3	!------------------------------------------------------------------------------!
[257]	4	! Current revisions:
[1]	5	! -----------------
[257]	6	! Output of messages replaced by message handling routine.
[240]	7	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[291]	8	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
	9	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
	10	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
[198]	11	!
	12	! Former revisions:
	13	! -----------------
	14	! $Id: read_var_list.f90 291 2009-04-16 12:07:26Z weinreis $
	15	!
[226]	16	! 216 2008-11-25 07:12:43Z raasch
	17	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
	18	!
[198]	19	! 173 2008-05-23 20:39:38Z raasch
[153]	20	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
[151]	21	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
	22	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
	23	! recycling_width, turbulent_inflow,
[145]	24	! -cross_ts_*, npex, npey,
	25	! hom_sum, volume_flow_area, volume_flow_initial moved from
[146]	26	! read_3d_binary to here,
[147]	27	! routines read_parts_of_var_list and skip_var_list added at the end
[138]	28	!
[139]	29	! 138 2007-11-28 10:03:58Z letzel
	30	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
	31	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
	32	! plant_canopy, time_sort_particles
	33	!
[110]	34	! 102 2007-07-27 09:09:17Z raasch
	35	! +time_coupling, top_momentumflux_u\|v
	36	!
[98]	37	! 95 2007-06-02 16:48:38Z raasch
	38	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
	39	! sa_vertical_gradient_level, bottom/top_salinity_flux
	40	!
[90]	41	! 87 2007-05-22 15:46:47Z raasch
	42	! +max_pr_user (version 3.1), var_hom renamed pr_palm
	43	!
[77]	44	! 75 2007-03-22 09:54:05Z raasch
	45	! +loop_optimization, pt_reference, moisture renamed humidity
	46	!
[39]	47	! 20 2007-02-26 00:12:32Z raasch
	48	! +top_heatflux, use_top_fluxes
	49	!
[3]	50	! RCS Log replace by Id keyword, revision history cleaned up
	51	!
[1]	52	! Revision 1.34 2006/08/22 14:14:27 raasch
	53	! +dz_max
	54	!
	55	! Revision 1.1 1998/03/18 20:18:48 raasch
	56	! Initial revision
	57	!
	58	!
	59	! Description:
	60	! ------------
[143]	61	! Reading values of global control variables from restart-file (binary format)
[1]	62	!------------------------------------------------------------------------------!
	63
	64	USE arrays_3d
	65	USE averaging
[87]	66	USE control_parameters
[1]	67	USE grid_variables
	68	USE indices
	69	USE model_1d
[116]	70	USE particle_attributes
[1]	71	USE pegrid
	72	USE profil_parameter
	73	USE statistics
	74
	75	IMPLICIT NONE
	76
	77	CHARACTER (LEN=10) :: binary_version, version_on_file
	78	CHARACTER (LEN=30) :: variable_chr
[87]	79
[143]	80
[1]	81	CALL check_open( 13 )
	82
	83	!
	84	!-- Make version number check first
	85	READ ( 13 ) version_on_file
[241]	86	binary_version = '3.4'
[1]	87	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	88	WRITE( message_string, * ) 'version mismatch concerning control ', &
	89	'variables', &
	90	'&version on file = "', &
	91	TRIM( version_on_file ), '"', &
	92	'&version on program = "', &
	93	TRIM( binary_version ), '"'
	94	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	95	ENDIF
	96
	97	!
[145]	98	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	99	!-- run
	100	READ ( 13 ) variable_chr
	101	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	102	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	103	'run on PE ', myid
[257]	104	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	105	ENDIF
	106	READ ( 13 ) numprocs_previous_run
	107
[146]	108	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	109	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	110	ENDIF
[145]	111
	112	READ ( 13 ) variable_chr
	113	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	114	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	115	'prior run on PE ', myid
	116	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	117	ENDIF
	118	READ ( 13 ) hor_index_bounds_previous_run
	119
	120	!
[1]	121	!-- Read vertical number of gridpoints and number of different areas used
	122	!-- for computing statistics. Allocate arrays depending on these values,
	123	!-- which are needed for the following read instructions.
	124	READ ( 13 ) variable_chr
	125	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	126	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	127	myid
	128	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	129	ENDIF
	130	READ ( 13 ) nz
[87]	131
[1]	132	READ ( 13 ) variable_chr
[87]	133	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	134	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	135	'prior run on PE ', myid
[257]	136	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	137	ENDIF
[159]	138	READ ( 13 ) max_pr_user ! This value is checked against the number of
	139	! user profiles given for the current run
	140	! in routine user_parin (it has to match)
[87]	141
	142	READ ( 13 ) variable_chr
[1]	143	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	144	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	145	'prior run on PE ', myid
[257]	146	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	147	ENDIF
	148	READ ( 13 ) statistic_regions
[146]	149	IF ( .NOT. ALLOCATED( ug ) ) THEN
[147]	150	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	151	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
	152	sa_init(0:nz+1), &
[146]	153	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
	154	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	155	ENDIF
[1]	156
	157	!
	158	!-- Now read all control parameters:
	159	!-- Caution: When the following read instructions have been changed, the
	160	!-- ------- version number stored in the variable binary_version has to be
	161	!-- increased. The same changes must also be done in write_var_list.
	162	READ ( 13 ) variable_chr
	163	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	164
	165	SELECT CASE ( TRIM( variable_chr ) )
	166
	167	CASE ( 'adjust_mixing_length' )
	168	READ ( 13 ) adjust_mixing_length
	169	CASE ( 'advected_distance_x' )
	170	READ ( 13 ) advected_distance_x
	171	CASE ( 'advected_distance_y' )
	172	READ ( 13 ) advected_distance_y
	173	CASE ( 'alpha_surface' )
	174	READ ( 13 ) alpha_surface
	175	CASE ( 'average_count_pr' )
	176	READ ( 13 ) average_count_pr
	177	CASE ( 'average_count_sp' )
	178	READ ( 13 ) average_count_sp
	179	CASE ( 'average_count_3d' )
	180	READ ( 13 ) average_count_3d
	181	CASE ( 'bc_e_b' )
	182	READ ( 13 ) bc_e_b
	183	CASE ( 'bc_lr' )
	184	READ ( 13 ) bc_lr
	185	CASE ( 'bc_ns' )
	186	READ ( 13 ) bc_ns
	187	CASE ( 'bc_p_b' )
	188	READ ( 13 ) bc_p_b
	189	CASE ( 'bc_p_t' )
	190	READ ( 13 ) bc_p_t
	191	CASE ( 'bc_pt_b' )
	192	READ ( 13 ) bc_pt_b
	193	CASE ( 'bc_pt_t' )
	194	READ ( 13 ) bc_pt_t
	195	CASE ( 'bc_pt_t_val' )
	196	READ ( 13 ) bc_pt_t_val
	197	CASE ( 'bc_q_b' )
	198	READ ( 13 ) bc_q_b
	199	CASE ( 'bc_q_t' )
	200	READ ( 13 ) bc_q_t
	201	CASE ( 'bc_q_t_val' )
	202	READ ( 13 ) bc_q_t_val
	203	CASE ( 'bc_s_b' )
	204	READ ( 13 ) bc_s_b
	205	CASE ( 'bc_s_t' )
	206	READ ( 13 ) bc_s_t
[95]	207	CASE ( 'bc_sa_t' )
	208	READ ( 13 ) bc_sa_t
[1]	209	CASE ( 'bc_uv_b' )
	210	READ ( 13 ) bc_uv_b
	211	CASE ( 'bc_uv_t' )
	212	READ ( 13 ) bc_uv_t
[95]	213	CASE ( 'bottom_salinityflux' )
	214	READ ( 13 ) bottom_salinityflux
[1]	215	CASE ( 'building_height' )
	216	READ ( 13 ) building_height
	217	CASE ( 'building_length_x' )
	218	READ ( 13 ) building_length_x
	219	CASE ( 'building_length_y' )
	220	READ ( 13 ) building_length_y
	221	CASE ( 'building_wall_left' )
	222	READ ( 13 ) building_wall_left
	223	CASE ( 'building_wall_south' )
	224	READ ( 13 ) building_wall_south
[138]	225	CASE ( 'canopy_mode' )
	226	READ ( 13 ) canopy_mode
[240]	227	CASE ( 'canyon_height' )
	228	READ ( 13 ) canyon_height
	229	CASE ( 'canyon_width_x' )
	230	READ ( 13 ) canyon_width_x
	231	CASE ( 'canyon_width_y' )
	232	READ ( 13 ) canyon_width_y
	233	CASE ( 'canyon_wall_left' )
	234	READ ( 13 ) canyon_wall_left
	235	CASE ( 'canyon_wall_south' )
	236	READ ( 13 ) canyon_wall_south
[1]	237	CASE ( 'cloud_droplets' )
	238	READ ( 13 ) cloud_droplets
	239	CASE ( 'cloud_physics' )
	240	READ ( 13 ) cloud_physics
	241	CASE ( 'conserve_volume_flow' )
	242	READ ( 13 ) conserve_volume_flow
[241]	243	CASE ( 'conserve_volume_flow_mode' )
	244	READ ( 13 ) conserve_volume_flow_mode
[291]	245	CASE ( 'coupling_start_time' )
	246	READ ( 13 ) coupling_start_time
[153]	247	CASE ( 'cthf' )
	248	READ ( 13 ) cthf
[1]	249	CASE ( 'current_timestep_number' )
	250	READ ( 13 ) current_timestep_number
	251	CASE ( 'cut_spline_overshoot' )
	252	READ ( 13 ) cut_spline_overshoot
	253	CASE ( 'damp_level_1d' )
	254	READ ( 13 ) damp_level_1d
	255	CASE ( 'dissipation_1d' )
	256	READ ( 13 ) dissipation_1d
[240]	257	CASE ( 'dp_external' )
	258	READ ( 13 ) dp_external
	259	CASE ( 'dp_level_b' )
	260	READ ( 13 ) dp_level_b
	261	CASE ( 'dp_smooth' )
	262	READ ( 13 ) dp_smooth
	263	CASE ( 'dpdxy' )
	264	READ ( 13 ) dpdxy
[138]	265	CASE ( 'drag_coefficient' )
	266	READ ( 13 ) drag_coefficient
[1]	267	CASE ( 'dt_fixed' )
	268	READ ( 13 ) dt_fixed
	269	CASE ( 'dt_pr_1d' )
	270	READ ( 13 ) dt_pr_1d
	271	CASE ( 'dt_run_control_1d' )
	272	READ ( 13 ) dt_run_control_1d
	273	CASE ( 'dt_3d' )
	274	READ ( 13 ) dt_3d
	275	CASE ( 'dvrp_filecount' )
	276	READ ( 13 ) dvrp_filecount
	277	CASE ( 'dx' )
	278	READ ( 13 ) dx
	279	CASE ( 'dy' )
	280	READ ( 13 ) dy
	281	CASE ( 'dz' )
	282	READ ( 13 ) dz
	283	CASE ( 'dz_max' )
	284	READ ( 13 ) dz_max
	285	CASE ( 'dz_stretch_factor' )
	286	READ ( 13 ) dz_stretch_factor
	287	CASE ( 'dz_stretch_level' )
	288	READ ( 13 ) dz_stretch_level
	289	CASE ( 'e_min' )
	290	READ ( 13 ) e_min
	291	CASE ( 'end_time_1d' )
	292	READ ( 13 ) end_time_1d
	293	CASE ( 'fft_method' )
	294	READ ( 13 ) fft_method
	295	CASE ( 'first_call_advec_particles' )
	296	READ ( 13 ) first_call_advec_particles
	297	CASE ( 'galilei_transformation' )
	298	READ ( 13 ) galilei_transformation
	299	CASE ( 'grid_matching' )
	300	READ ( 13 ) grid_matching
	301	CASE ( 'hom' )
	302	READ ( 13 ) hom
[143]	303	CASE ( 'hom_sum' )
	304	READ ( 13 ) hom_sum
[151]	305	CASE ( 'humidity' )
	306	READ ( 13 ) humidity
	307	CASE ( 'inflow_damping_factor' )
	308	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	309	ALLOCATE( inflow_damping_factor(0:nz+1) )
	310	ENDIF
	311	READ ( 13 ) inflow_damping_factor
	312	CASE ( 'inflow_damping_height' )
	313	READ ( 13 ) inflow_damping_height
	314	CASE ( 'inflow_damping_width' )
	315	READ ( 13 ) inflow_damping_width
[1]	316	CASE ( 'inflow_disturbance_begin' )
	317	READ ( 13 ) inflow_disturbance_begin
	318	CASE ( 'inflow_disturbance_end' )
	319	READ ( 13 ) inflow_disturbance_end
	320	CASE ( 'km_constant' )
	321	READ ( 13 ) km_constant
	322	CASE ( 'km_damp_max' )
	323	READ ( 13 ) km_damp_max
[138]	324	CASE ( 'lad' )
	325	READ ( 13 ) lad
	326	CASE ( 'lad_surface' )
	327	READ ( 13 ) lad_surface
	328	CASE ( 'lad_vertical_gradient' )
	329	READ ( 13 ) lad_vertical_gradient
	330	CASE ( 'lad_vertical_gradient_level' )
	331	READ ( 13 ) lad_vertical_gradient_level
	332	CASE ( 'lad_vertical_gradient_level_in' )
	333	READ ( 13 ) lad_vertical_gradient_level_ind
[1]	334	CASE ( 'last_dt_change' )
	335	READ ( 13 ) last_dt_change
[153]	336	CASE ( 'leaf_surface_concentration' )
	337	READ ( 13 ) leaf_surface_concentration
[1]	338	CASE ( 'long_filter_factor' )
	339	READ ( 13 ) long_filter_factor
[63]	340	CASE ( 'loop_optimization' )
	341	READ ( 13 ) loop_optimization
[151]	342	CASE ( 'mean_inflow_profiles' )
	343	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
	344	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
	345	ENDIF
	346	READ ( 13 ) mean_inflow_profiles
[1]	347	CASE ( 'mixing_length_1d' )
	348	READ ( 13 ) mixing_length_1d
	349	CASE ( 'momentum_advec' )
	350	READ ( 13 ) momentum_advec
	351	CASE ( 'netcdf_precision' )
	352	READ ( 13 ) netcdf_precision
	353	CASE ( 'nsor_ini' )
	354	READ ( 13 ) nsor_ini
	355	CASE ( 'nx' )
	356	READ ( 13 ) nx
[147]	357	nx_on_file = nx
[1]	358	CASE ( 'ny' )
	359	READ ( 13 ) ny
[147]	360	ny_on_file = ny
[94]	361	CASE ( 'ocean' )
	362	READ ( 13 ) ocean
[1]	363	CASE ( 'old_dt' )
	364	READ ( 13 ) old_dt
	365	CASE ( 'omega' )
	366	READ ( 13 ) omega
	367	CASE ( 'outflow_damping_width' )
	368	READ ( 13 ) outflow_damping_width
	369	CASE ( 'overshoot_limit_e' )
	370	READ ( 13 ) overshoot_limit_e
	371	CASE ( 'overshoot_limit_pt' )
	372	READ ( 13 ) overshoot_limit_pt
	373	CASE ( 'overshoot_limit_u' )
	374	READ ( 13 ) overshoot_limit_u
	375	CASE ( 'overshoot_limit_v' )
	376	READ ( 13 ) overshoot_limit_v
	377	CASE ( 'overshoot_limit_w' )
	378	READ ( 13 ) overshoot_limit_w
	379	CASE ( 'passive_scalar' )
	380	READ ( 13 ) passive_scalar
[138]	381	CASE ( 'pch_index' )
	382	READ ( 13 ) pch_index
[1]	383	CASE ( 'phi' )
	384	READ ( 13 ) phi
[138]	385	CASE ( 'plant_canopy' )
	386	READ ( 13 ) plant_canopy
[1]	387	CASE ( 'prandtl_layer' )
	388	READ ( 13 ) prandtl_layer
	389	CASE ( 'precipitation' )
	390	READ ( 13 ) precipitation
	391	CASE ( 'pt_init' )
	392	READ ( 13 ) pt_init
[57]	393	CASE ( 'pt_reference' )
	394	READ ( 13 ) pt_reference
[1]	395	CASE ( 'pt_surface' )
	396	READ ( 13 ) pt_surface
	397	CASE ( 'pt_surface_initial_change' )
	398	READ ( 13 ) pt_surface_initial_change
	399	CASE ( 'pt_vertical_gradient' )
	400	READ ( 13 ) pt_vertical_gradient
	401	CASE ( 'pt_vertical_gradient_level' )
	402	READ ( 13 ) pt_vertical_gradient_level
	403	CASE ( 'pt_vertical_gradient_level_ind' )
	404	READ ( 13 ) pt_vertical_gradient_level_ind
	405	CASE ( 'q_init' )
	406	READ ( 13 ) q_init
	407	CASE ( 'q_surface' )
	408	READ ( 13 ) q_surface
	409	CASE ( 'q_surface_initial_change' )
	410	READ ( 13 ) q_surface_initial_change
	411	CASE ( 'q_vertical_gradient' )
	412	READ ( 13 ) q_vertical_gradient
	413	CASE ( 'q_vertical_gradient_level' )
	414	READ ( 13 ) q_vertical_gradient_level
	415	CASE ( 'q_vertical_gradient_level_ind' )
	416	READ ( 13 ) q_vertical_gradient_level_ind
	417	CASE ( 'radiation' )
	418	READ ( 13 ) radiation
	419	CASE ( 'random_generator' )
	420	READ ( 13 ) random_generator
	421	CASE ( 'random_heatflux' )
	422	READ ( 13 ) random_heatflux
[151]	423	CASE ( 'recycling_width' )
	424	READ ( 13 ) recycling_width
[1]	425	CASE ( 'rif_max' )
	426	READ ( 13 ) rif_max
	427	CASE ( 'rif_min' )
	428	READ ( 13 ) rif_min
	429	CASE ( 'roughness_length' )
	430	READ ( 13 ) roughness_length
	431	CASE ( 'runnr' )
	432	READ ( 13 ) runnr
[291]	433	CASE ( 'run_coupled' )
	434	READ ( 13 ) run_coupled
[94]	435	CASE ( 'sa_init' )
	436	READ ( 13 ) sa_init
	437	CASE ( 'sa_surface' )
	438	READ ( 13 ) sa_surface
	439	CASE ( 'sa_vertical_gradient' )
	440	READ ( 13 ) sa_vertical_gradient
	441	CASE ( 'sa_vertical_gradient_level' )
	442	READ ( 13 ) sa_vertical_gradient_level
[1]	443	CASE ( 'scalar_advec' )
	444	READ ( 13 ) scalar_advec
[153]	445	CASE ( 'scalar_exchange_coefficient' )
	446	READ ( 13 ) scalar_exchange_coefficient
[1]	447	CASE ( 'simulated_time' )
	448	READ ( 13 ) simulated_time
	449	CASE ( 'surface_heatflux' )
	450	READ ( 13 ) surface_heatflux
	451	CASE ( 'surface_pressure' )
	452	READ ( 13 ) surface_pressure
	453	CASE ( 'surface_scalarflux' )
	454	READ ( 13 ) surface_scalarflux
	455	CASE ( 'surface_waterflux' )
	456	READ ( 13 ) surface_waterflux
	457	CASE ( 's_surface' )
	458	READ ( 13 ) s_surface
	459	CASE ( 's_surface_initial_change' )
	460	READ ( 13 ) s_surface_initial_change
	461	CASE ( 's_vertical_gradient' )
	462	READ ( 13 ) s_vertical_gradient
	463	CASE ( 's_vertical_gradient_level' )
	464	READ ( 13 ) s_vertical_gradient_level
[102]	465	CASE ( 'time_coupling' )
	466	READ ( 13 ) time_coupling
[1]	467	CASE ( 'time_disturb' )
	468	READ ( 13 ) time_disturb
	469	CASE ( 'time_dopr' )
	470	READ ( 13 ) time_dopr
	471	CASE ( 'time_dopr_av' )
	472	READ ( 13 ) time_dopr_av
	473	CASE ( 'time_dopr_listing' )
	474	READ ( 13 ) time_dopr_listing
	475	CASE ( 'time_dopts' )
	476	READ ( 13 ) time_dopts
	477	CASE ( 'time_dosp' )
	478	READ ( 13 ) time_dosp
	479	CASE ( 'time_dots' )
	480	READ ( 13 ) time_dots
	481	CASE ( 'time_do2d_xy' )
	482	READ ( 13 ) time_do2d_xy
	483	CASE ( 'time_do2d_xz' )
	484	READ ( 13 ) time_do2d_xz
	485	CASE ( 'time_do2d_yz' )
	486	READ ( 13 ) time_do2d_yz
	487	CASE ( 'time_do3d' )
	488	READ ( 13 ) time_do3d
	489	CASE ( 'time_do_av' )
	490	READ ( 13 ) time_do_av
	491	CASE ( 'time_do_sla' )
	492	READ ( 13 ) time_do_sla
	493	CASE ( 'time_dvrp' )
	494	READ ( 13 ) time_dvrp
	495	CASE ( 'time_restart' )
	496	READ ( 13 ) time_restart
	497	CASE ( 'time_run_control' )
	498	READ ( 13 ) time_run_control
[291]	499	CASE ( 'time_since_reference_point' )
	500	READ ( 13 ) time_since_reference_point
[116]	501	CASE ( 'time_sort_particles' )
	502	READ ( 13 ) time_sort_particles
[1]	503	CASE ( 'timestep_scheme' )
	504	READ ( 13 ) timestep_scheme
	505	CASE ( 'topography' )
	506	READ ( 13 ) topography
[256]	507	CASE ( 'topography_grid_convention' )
	508	READ ( 13 ) topography_grid_convention
[19]	509	CASE ( 'top_heatflux' )
	510	READ ( 13 ) top_heatflux
[102]	511	CASE ( 'top_momentumflux_u' )
	512	READ ( 13 ) top_momentumflux_u
	513	CASE ( 'top_momentumflux_v' )
	514	READ ( 13 ) top_momentumflux_v
[94]	515	CASE ( 'top_salinityflux' )
	516	READ ( 13 ) top_salinityflux
[1]	517	CASE ( 'tsc' )
	518	READ ( 13 ) tsc
[151]	519	CASE ( 'turbulent_inflow' )
	520	READ ( 13 ) turbulent_inflow
[241]	521	CASE ( 'u_bulk' )
	522	READ ( 13 ) u_bulk
[1]	523	CASE ( 'u_init' )
	524	READ ( 13 ) u_init
	525	CASE ( 'u_max' )
	526	READ ( 13 ) u_max
	527	CASE ( 'u_max_ijk' )
	528	READ ( 13 ) u_max_ijk
	529	CASE ( 'ug' )
	530	READ ( 13 ) ug
	531	CASE ( 'ug_surface' )
	532	READ ( 13 ) ug_surface
	533	CASE ( 'ug_vertical_gradient' )
	534	READ ( 13 ) ug_vertical_gradient
	535	CASE ( 'ug_vertical_gradient_level' )
	536	READ ( 13 ) ug_vertical_gradient_level
	537	CASE ( 'ug_vertical_gradient_level_ind' )
	538	READ ( 13 ) ug_vertical_gradient_level_ind
	539	CASE ( 'ups_limit_e' )
	540	READ ( 13 ) ups_limit_e
	541	CASE ( 'ups_limit_pt' )
	542	READ ( 13 ) ups_limit_pt
	543	CASE ( 'ups_limit_u' )
	544	READ ( 13 ) ups_limit_u
	545	CASE ( 'ups_limit_v' )
	546	READ ( 13 ) ups_limit_v
	547	CASE ( 'ups_limit_w' )
	548	READ ( 13 ) ups_limit_w
	549	CASE ( 'use_surface_fluxes' )
	550	READ ( 13 ) use_surface_fluxes
[20]	551	CASE ( 'use_top_fluxes' )
	552	READ ( 13 ) use_top_fluxes
[1]	553	CASE ( 'use_ug_for_galilei_tr' )
	554	READ ( 13 ) use_ug_for_galilei_tr
	555	CASE ( 'use_upstream_for_tke' )
	556	READ ( 13 ) use_upstream_for_tke
[241]	557	CASE ( 'v_bulk' )
	558	READ ( 13 ) v_bulk
[1]	559	CASE ( 'v_init' )
	560	READ ( 13 ) v_init
	561	CASE ( 'v_max' )
	562	READ ( 13 ) v_max
	563	CASE ( 'v_max_ijk' )
	564	READ ( 13 ) v_max_ijk
	565	CASE ( 'vg' )
	566	READ ( 13 ) vg
	567	CASE ( 'vg_surface' )
	568	READ ( 13 ) vg_surface
	569	CASE ( 'vg_vertical_gradient' )
	570	READ ( 13 ) vg_vertical_gradient
	571	CASE ( 'vg_vertical_gradient_level' )
	572	READ ( 13 ) vg_vertical_gradient_level
	573	CASE ( 'vg_vertical_gradient_level_ind' )
	574	READ ( 13 ) vg_vertical_gradient_level_ind
[143]	575	CASE ( 'volume_flow_area' )
	576	READ ( 13 ) volume_flow_area
	577	CASE ( 'volume_flow_initial' )
	578	READ ( 13 ) volume_flow_initial
[1]	579	CASE ( 'wall_adjustment' )
	580	READ ( 13 ) wall_adjustment
	581	CASE ( 'w_max' )
	582	READ ( 13 ) w_max
	583	CASE ( 'w_max_ijk' )
	584	READ ( 13 ) w_max_ijk
	585
	586	CASE DEFAULT
[257]	587	WRITE( message_string, * ) 'unknown variable named "', &
	588	TRIM( variable_chr ), '" found in', &
	589	' data from prior run on PE ', myid
	590	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	591	END SELECT
	592	!
	593	!-- Read next string
	594	READ ( 13 ) variable_chr
	595
	596	ENDDO
	597
	598
[146]	599	END SUBROUTINE read_var_list
[143]	600
[146]	601
	602
[147]	603	SUBROUTINE read_parts_of_var_list
	604
	605	!------------------------------------------------------------------------------!
	606	! Description:
	607	! ------------
	608	! Skipping the global control variables from restart-file (binary format)
	609	! except some informations needed when reading restart data from a previous
[151]	610	! run which used a smaller total domain or/and a different domain decomposition.
[147]	611	!------------------------------------------------------------------------------!
	612
[151]	613	USE arrays_3d
[147]	614	USE control_parameters
	615	USE indices
	616	USE pegrid
	617	USE statistics
	618
	619	IMPLICIT NONE
	620
	621	CHARACTER (LEN=10) :: version_on_file
	622	CHARACTER (LEN=30) :: variable_chr
	623
	624	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
[170]	625	statistic_regions_on_file, tmp_mpru, tmp_sr
[147]	626
[151]	627	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
[147]	628	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
	629
	630
	631	CALL check_open( 13 )
	632
	633	WRITE (9,*) 'rpovl: after check open 13'
	634	CALL local_flush( 9 )
	635	READ ( 13 ) version_on_file
	636
	637	!
	638	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	639	!-- run
	640	READ ( 13 ) variable_chr
	641	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	642	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	643	'run on PE ', myid
[257]	644	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	645	ENDIF
	646	READ ( 13 ) numprocs_previous_run
	647
	648	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	649	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	650	ENDIF
	651
	652	READ ( 13 ) variable_chr
	653	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	654	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	655	'prior run on PE ', myid
	656	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	657	ENDIF
	658	READ ( 13 ) hor_index_bounds_previous_run
	659
	660	!
	661	!-- Read vertical number of gridpoints and number of different areas used
	662	!-- for computing statistics. Allocate arrays depending on these values,
	663	!-- which are needed for the following read instructions.
	664	READ ( 13 ) variable_chr
	665	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	666	message_string = 'nz not found in restart data file'
	667	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	668	ENDIF
	669	READ ( 13 ) nz_on_file
	670	IF ( nz_on_file /= nz ) THEN
[257]	671	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	672	'gridpoints along z', &
	673	'&nz on file = "', nz_on_file, '"', &
	674	'&nz from run = "', nz, '"'
[257]	675	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	676	ENDIF
	677
	678	READ ( 13 ) variable_chr
	679	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	680	message_string = 'max_pr_user not found in restart data file'
	681	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	682	ENDIF
	683	READ ( 13 ) max_pr_user_on_file
[170]	684	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	685	WRITE( message_string, * ) 'number of user profiles on res', &
	686	'tart data file differs from the current ', &
	687	'run&max_pr_user on file = "', &
	688	max_pr_user_on_file, '"', &
	689	'&max_pr_user from run = "', &
[257]	690	max_pr_user, '"'
	691	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	692	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	693	ELSE
	694	tmp_mpru = max_pr_user
[147]	695	ENDIF
	696
	697	READ ( 13 ) variable_chr
	698	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	699	message_string = 'statistic_regions not found in restart data file'
	700	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	701	ENDIF
	702	READ ( 13 ) statistic_regions_on_file
[173]	703	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[274]	704	WRITE( message_string, * ) 'statistic regions on restart data file ',&
	705	'differ from the current run', &
	706	'&statistic regions on file = "', &
	707	statistic_regions_on_file, '"', &
	708	'&statistic regions from run = "', &
	709	statistic_regions, '"', &
[257]	710	'&statistic data may be lost!'
	711	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	712	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	713	ELSE
	714	tmp_sr = statistic_regions
[147]	715	ENDIF
	716
	717
	718	!
	719	!-- Now read and check some control parameters and skip the rest
	720	!-- The total domain of the pre-run must not be smaller than the subdomain
	721	!-- of the current run, because the mapping of data from the pre-run does
	722	!-- not work for this case.
	723	WRITE (9,*) 'wpovl: begin reading variables'
	724	CALL local_flush( 9 )
	725	READ ( 13 ) variable_chr
	726
	727	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	728
	729	SELECT CASE ( TRIM( variable_chr ) )
	730
[151]	731	CASE ( 'average_count_pr' )
	732	READ ( 13 ) average_count_pr
[257]	733	IF ( average_count_pr /= 0 ) THEN
[274]	734	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	735	'averaged. &Averaging will be done now using ', &
	736	average_count_pr, ' samples.'
	737	CALL message( 'read_parts_of_var_list', 'PA0309', &
	738	0, 1, 0, 6, 0 )
[151]	739	ENDIF
	740
[147]	741	CASE ( 'hom' )
	742	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	743	0:statistic_regions_on_file) )
	744	READ ( 13 ) hom_on_file
[170]	745	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	746	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	747	DEALLOCATE( hom_on_file )
	748
[151]	749	CASE ( 'hom_sum' )
	750	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	751	0:statistic_regions_on_file) )
	752	READ ( 13 ) hom_sum_on_file
[170]	753	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	754	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	755	DEALLOCATE( hom_sum_on_file )
	756
[147]	757	CASE ( 'nx' )
	758	READ ( 13 ) nx_on_file
	759
	760	CASE ( 'ny' )
	761	READ ( 13 ) ny_on_file
	762
	763
	764	CASE DEFAULT
	765
	766	READ ( 13 ) idum
	767
	768	END SELECT
	769
	770	READ ( 13 ) variable_chr
	771
	772	ENDDO
	773
[151]	774	!
	775	!-- Calculate the temporal average of vertical profiles, if neccessary
	776	IF ( average_count_pr /= 0 ) THEN
	777	hom_sum = hom_sum / REAL( average_count_pr )
	778	ENDIF
[147]	779
[151]	780
[147]	781	END SUBROUTINE read_parts_of_var_list
	782
	783
	784
[146]	785	SUBROUTINE skip_var_list
	786
	787	!------------------------------------------------------------------------------!
	788	! Description:
	789	! ------------
	790	! Skipping the global control variables from restart-file (binary format)
	791	!------------------------------------------------------------------------------!
	792
[147]	793	IMPLICIT NONE
	794
[146]	795	CHARACTER (LEN=10) :: version_on_file
	796	CHARACTER (LEN=30) :: variable_chr
	797
	798	INTEGER :: idum
	799
	800
[147]	801	WRITE (9,*) 'skipvl #1'
	802	CALL local_flush( 9 )
[146]	803	READ ( 13 ) version_on_file
	804
[147]	805	WRITE (9,*) 'skipvl before variable_chr'
	806	CALL local_flush( 9 )
[146]	807	READ ( 13 ) variable_chr
[147]	808	WRITE (9,*) 'skipvl after variable_chr'
	809	CALL local_flush( 9 )
[146]	810
	811	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	812
[147]	813	WRITE (9,*) 'skipvl chr = ', variable_chr
	814	CALL local_flush( 9 )
[146]	815	READ ( 13 ) idum
	816	READ ( 13 ) variable_chr
	817
	818	ENDDO
[147]	819	WRITE (9,*) 'skipvl last'
	820	CALL local_flush( 9 )
[146]	821
	822
	823	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |