Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 324

Last change on this file since 324 was 291, checked in by raasch, 16 years ago
changes for coupling with independent precursor runs; z_i calculation with Sullivan criterion
Property svn:keywords set to `Id`
File size: 30.0 KB

Line
1	SUBROUTINE read_var_list
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	! Output of messages replaced by message handling routine.
7	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
8	! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
9	! dp_external, dp_level_b, dp_smooth, dpdxy, run_coupled,
10	! time_since_reference_point, topography_grid_convention, u_bulk, v_bulk
11	!
12	! Former revisions:
13	! -----------------
14	! $Id: read_var_list.f90 291 2009-04-16 12:07:26Z weinreis $
15	!
16	! 216 2008-11-25 07:12:43Z raasch
17	! limitations for nx_on_file, ny_on_file removed (read_parts_of_var_list)
18	!
19	! 173 2008-05-23 20:39:38Z raasch
20	! +cthf, leaf_surface_concentration, scalar_exchange_coefficient
21	! +numprocs_previous_run, hor_index_bounds_previous_run, inflow_damping_factor,
22	! inflow_damping_height, inflow_damping_width, mean_inflow_profiles,
23	! recycling_width, turbulent_inflow,
24	! -cross_ts_*, npex, npey,
25	! hom_sum, volume_flow_area, volume_flow_initial moved from
26	! read_3d_binary to here,
27	! routines read_parts_of_var_list and skip_var_list added at the end
28	!
29	! 138 2007-11-28 10:03:58Z letzel
30	! +canopy_mode, drag_coefficient, lad, lad_surface, lad_vertical_gradient,
31	! lad_vertical_gradient_level, lad_vertical_gradient_level_ind, pch_index,
32	! plant_canopy, time_sort_particles
33	!
34	! 102 2007-07-27 09:09:17Z raasch
35	! +time_coupling, top_momentumflux_u\|v
36	!
37	! 95 2007-06-02 16:48:38Z raasch
38	! +bc_sa_t, ocean, sa_init, sa_surface, sa_vertical_gradient,
39	! sa_vertical_gradient_level, bottom/top_salinity_flux
40	!
41	! 87 2007-05-22 15:46:47Z raasch
42	! +max_pr_user (version 3.1), var_hom renamed pr_palm
43	!
44	! 75 2007-03-22 09:54:05Z raasch
45	! +loop_optimization, pt_reference, moisture renamed humidity
46	!
47	! 20 2007-02-26 00:12:32Z raasch
48	! +top_heatflux, use_top_fluxes
49	!
50	! RCS Log replace by Id keyword, revision history cleaned up
51	!
52	! Revision 1.34 2006/08/22 14:14:27 raasch
53	! +dz_max
54	!
55	! Revision 1.1 1998/03/18 20:18:48 raasch
56	! Initial revision
57	!
58	!
59	! Description:
60	! ------------
61	! Reading values of global control variables from restart-file (binary format)
62	!------------------------------------------------------------------------------!
63
64	USE arrays_3d
65	USE averaging
66	USE control_parameters
67	USE grid_variables
68	USE indices
69	USE model_1d
70	USE particle_attributes
71	USE pegrid
72	USE profil_parameter
73	USE statistics
74
75	IMPLICIT NONE
76
77	CHARACTER (LEN=10) :: binary_version, version_on_file
78	CHARACTER (LEN=30) :: variable_chr
79
80
81	CALL check_open( 13 )
82
83	!
84	!-- Make version number check first
85	READ ( 13 ) version_on_file
86	binary_version = '3.4'
87	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
88	WRITE( message_string, * ) 'version mismatch concerning control ', &
89	'variables', &
90	'&version on file = "', &
91	TRIM( version_on_file ), '"', &
92	'&version on program = "', &
93	TRIM( binary_version ), '"'
94	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
95	ENDIF
96
97	!
98	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
99	!-- run
100	READ ( 13 ) variable_chr
101	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
102	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
103	'run on PE ', myid
104	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
105	ENDIF
106	READ ( 13 ) numprocs_previous_run
107
108	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
109	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
110	ENDIF
111
112	READ ( 13 ) variable_chr
113	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
114	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
115	'prior run on PE ', myid
116	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
117	ENDIF
118	READ ( 13 ) hor_index_bounds_previous_run
119
120	!
121	!-- Read vertical number of gridpoints and number of different areas used
122	!-- for computing statistics. Allocate arrays depending on these values,
123	!-- which are needed for the following read instructions.
124	READ ( 13 ) variable_chr
125	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
126	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
127	myid
128	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
129	ENDIF
130	READ ( 13 ) nz
131
132	READ ( 13 ) variable_chr
133	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
134	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
135	'prior run on PE ', myid
136	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
137	ENDIF
138	READ ( 13 ) max_pr_user ! This value is checked against the number of
139	! user profiles given for the current run
140	! in routine user_parin (it has to match)
141
142	READ ( 13 ) variable_chr
143	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
144	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
145	'prior run on PE ', myid
146	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
147	ENDIF
148	READ ( 13 ) statistic_regions
149	IF ( .NOT. ALLOCATED( ug ) ) THEN
150	ALLOCATE( lad(0:nz+1), ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
151	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
152	sa_init(0:nz+1), &
153	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
154	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
155	ENDIF
156
157	!
158	!-- Now read all control parameters:
159	!-- Caution: When the following read instructions have been changed, the
160	!-- ------- version number stored in the variable binary_version has to be
161	!-- increased. The same changes must also be done in write_var_list.
162	READ ( 13 ) variable_chr
163	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
164
165	SELECT CASE ( TRIM( variable_chr ) )
166
167	CASE ( 'adjust_mixing_length' )
168	READ ( 13 ) adjust_mixing_length
169	CASE ( 'advected_distance_x' )
170	READ ( 13 ) advected_distance_x
171	CASE ( 'advected_distance_y' )
172	READ ( 13 ) advected_distance_y
173	CASE ( 'alpha_surface' )
174	READ ( 13 ) alpha_surface
175	CASE ( 'average_count_pr' )
176	READ ( 13 ) average_count_pr
177	CASE ( 'average_count_sp' )
178	READ ( 13 ) average_count_sp
179	CASE ( 'average_count_3d' )
180	READ ( 13 ) average_count_3d
181	CASE ( 'bc_e_b' )
182	READ ( 13 ) bc_e_b
183	CASE ( 'bc_lr' )
184	READ ( 13 ) bc_lr
185	CASE ( 'bc_ns' )
186	READ ( 13 ) bc_ns
187	CASE ( 'bc_p_b' )
188	READ ( 13 ) bc_p_b
189	CASE ( 'bc_p_t' )
190	READ ( 13 ) bc_p_t
191	CASE ( 'bc_pt_b' )
192	READ ( 13 ) bc_pt_b
193	CASE ( 'bc_pt_t' )
194	READ ( 13 ) bc_pt_t
195	CASE ( 'bc_pt_t_val' )
196	READ ( 13 ) bc_pt_t_val
197	CASE ( 'bc_q_b' )
198	READ ( 13 ) bc_q_b
199	CASE ( 'bc_q_t' )
200	READ ( 13 ) bc_q_t
201	CASE ( 'bc_q_t_val' )
202	READ ( 13 ) bc_q_t_val
203	CASE ( 'bc_s_b' )
204	READ ( 13 ) bc_s_b
205	CASE ( 'bc_s_t' )
206	READ ( 13 ) bc_s_t
207	CASE ( 'bc_sa_t' )
208	READ ( 13 ) bc_sa_t
209	CASE ( 'bc_uv_b' )
210	READ ( 13 ) bc_uv_b
211	CASE ( 'bc_uv_t' )
212	READ ( 13 ) bc_uv_t
213	CASE ( 'bottom_salinityflux' )
214	READ ( 13 ) bottom_salinityflux
215	CASE ( 'building_height' )
216	READ ( 13 ) building_height
217	CASE ( 'building_length_x' )
218	READ ( 13 ) building_length_x
219	CASE ( 'building_length_y' )
220	READ ( 13 ) building_length_y
221	CASE ( 'building_wall_left' )
222	READ ( 13 ) building_wall_left
223	CASE ( 'building_wall_south' )
224	READ ( 13 ) building_wall_south
225	CASE ( 'canopy_mode' )
226	READ ( 13 ) canopy_mode
227	CASE ( 'canyon_height' )
228	READ ( 13 ) canyon_height
229	CASE ( 'canyon_width_x' )
230	READ ( 13 ) canyon_width_x
231	CASE ( 'canyon_width_y' )
232	READ ( 13 ) canyon_width_y
233	CASE ( 'canyon_wall_left' )
234	READ ( 13 ) canyon_wall_left
235	CASE ( 'canyon_wall_south' )
236	READ ( 13 ) canyon_wall_south
237	CASE ( 'cloud_droplets' )
238	READ ( 13 ) cloud_droplets
239	CASE ( 'cloud_physics' )
240	READ ( 13 ) cloud_physics
241	CASE ( 'conserve_volume_flow' )
242	READ ( 13 ) conserve_volume_flow
243	CASE ( 'conserve_volume_flow_mode' )
244	READ ( 13 ) conserve_volume_flow_mode
245	CASE ( 'coupling_start_time' )
246	READ ( 13 ) coupling_start_time
247	CASE ( 'cthf' )
248	READ ( 13 ) cthf
249	CASE ( 'current_timestep_number' )
250	READ ( 13 ) current_timestep_number
251	CASE ( 'cut_spline_overshoot' )
252	READ ( 13 ) cut_spline_overshoot
253	CASE ( 'damp_level_1d' )
254	READ ( 13 ) damp_level_1d
255	CASE ( 'dissipation_1d' )
256	READ ( 13 ) dissipation_1d
257	CASE ( 'dp_external' )
258	READ ( 13 ) dp_external
259	CASE ( 'dp_level_b' )
260	READ ( 13 ) dp_level_b
261	CASE ( 'dp_smooth' )
262	READ ( 13 ) dp_smooth
263	CASE ( 'dpdxy' )
264	READ ( 13 ) dpdxy
265	CASE ( 'drag_coefficient' )
266	READ ( 13 ) drag_coefficient
267	CASE ( 'dt_fixed' )
268	READ ( 13 ) dt_fixed
269	CASE ( 'dt_pr_1d' )
270	READ ( 13 ) dt_pr_1d
271	CASE ( 'dt_run_control_1d' )
272	READ ( 13 ) dt_run_control_1d
273	CASE ( 'dt_3d' )
274	READ ( 13 ) dt_3d
275	CASE ( 'dvrp_filecount' )
276	READ ( 13 ) dvrp_filecount
277	CASE ( 'dx' )
278	READ ( 13 ) dx
279	CASE ( 'dy' )
280	READ ( 13 ) dy
281	CASE ( 'dz' )
282	READ ( 13 ) dz
283	CASE ( 'dz_max' )
284	READ ( 13 ) dz_max
285	CASE ( 'dz_stretch_factor' )
286	READ ( 13 ) dz_stretch_factor
287	CASE ( 'dz_stretch_level' )
288	READ ( 13 ) dz_stretch_level
289	CASE ( 'e_min' )
290	READ ( 13 ) e_min
291	CASE ( 'end_time_1d' )
292	READ ( 13 ) end_time_1d
293	CASE ( 'fft_method' )
294	READ ( 13 ) fft_method
295	CASE ( 'first_call_advec_particles' )
296	READ ( 13 ) first_call_advec_particles
297	CASE ( 'galilei_transformation' )
298	READ ( 13 ) galilei_transformation
299	CASE ( 'grid_matching' )
300	READ ( 13 ) grid_matching
301	CASE ( 'hom' )
302	READ ( 13 ) hom
303	CASE ( 'hom_sum' )
304	READ ( 13 ) hom_sum
305	CASE ( 'humidity' )
306	READ ( 13 ) humidity
307	CASE ( 'inflow_damping_factor' )
308	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
309	ALLOCATE( inflow_damping_factor(0:nz+1) )
310	ENDIF
311	READ ( 13 ) inflow_damping_factor
312	CASE ( 'inflow_damping_height' )
313	READ ( 13 ) inflow_damping_height
314	CASE ( 'inflow_damping_width' )
315	READ ( 13 ) inflow_damping_width
316	CASE ( 'inflow_disturbance_begin' )
317	READ ( 13 ) inflow_disturbance_begin
318	CASE ( 'inflow_disturbance_end' )
319	READ ( 13 ) inflow_disturbance_end
320	CASE ( 'km_constant' )
321	READ ( 13 ) km_constant
322	CASE ( 'km_damp_max' )
323	READ ( 13 ) km_damp_max
324	CASE ( 'lad' )
325	READ ( 13 ) lad
326	CASE ( 'lad_surface' )
327	READ ( 13 ) lad_surface
328	CASE ( 'lad_vertical_gradient' )
329	READ ( 13 ) lad_vertical_gradient
330	CASE ( 'lad_vertical_gradient_level' )
331	READ ( 13 ) lad_vertical_gradient_level
332	CASE ( 'lad_vertical_gradient_level_in' )
333	READ ( 13 ) lad_vertical_gradient_level_ind
334	CASE ( 'last_dt_change' )
335	READ ( 13 ) last_dt_change
336	CASE ( 'leaf_surface_concentration' )
337	READ ( 13 ) leaf_surface_concentration
338	CASE ( 'long_filter_factor' )
339	READ ( 13 ) long_filter_factor
340	CASE ( 'loop_optimization' )
341	READ ( 13 ) loop_optimization
342	CASE ( 'mean_inflow_profiles' )
343	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
344	ALLOCATE( mean_inflow_profiles(0:nz+1,5) )
345	ENDIF
346	READ ( 13 ) mean_inflow_profiles
347	CASE ( 'mixing_length_1d' )
348	READ ( 13 ) mixing_length_1d
349	CASE ( 'momentum_advec' )
350	READ ( 13 ) momentum_advec
351	CASE ( 'netcdf_precision' )
352	READ ( 13 ) netcdf_precision
353	CASE ( 'nsor_ini' )
354	READ ( 13 ) nsor_ini
355	CASE ( 'nx' )
356	READ ( 13 ) nx
357	nx_on_file = nx
358	CASE ( 'ny' )
359	READ ( 13 ) ny
360	ny_on_file = ny
361	CASE ( 'ocean' )
362	READ ( 13 ) ocean
363	CASE ( 'old_dt' )
364	READ ( 13 ) old_dt
365	CASE ( 'omega' )
366	READ ( 13 ) omega
367	CASE ( 'outflow_damping_width' )
368	READ ( 13 ) outflow_damping_width
369	CASE ( 'overshoot_limit_e' )
370	READ ( 13 ) overshoot_limit_e
371	CASE ( 'overshoot_limit_pt' )
372	READ ( 13 ) overshoot_limit_pt
373	CASE ( 'overshoot_limit_u' )
374	READ ( 13 ) overshoot_limit_u
375	CASE ( 'overshoot_limit_v' )
376	READ ( 13 ) overshoot_limit_v
377	CASE ( 'overshoot_limit_w' )
378	READ ( 13 ) overshoot_limit_w
379	CASE ( 'passive_scalar' )
380	READ ( 13 ) passive_scalar
381	CASE ( 'pch_index' )
382	READ ( 13 ) pch_index
383	CASE ( 'phi' )
384	READ ( 13 ) phi
385	CASE ( 'plant_canopy' )
386	READ ( 13 ) plant_canopy
387	CASE ( 'prandtl_layer' )
388	READ ( 13 ) prandtl_layer
389	CASE ( 'precipitation' )
390	READ ( 13 ) precipitation
391	CASE ( 'pt_init' )
392	READ ( 13 ) pt_init
393	CASE ( 'pt_reference' )
394	READ ( 13 ) pt_reference
395	CASE ( 'pt_surface' )
396	READ ( 13 ) pt_surface
397	CASE ( 'pt_surface_initial_change' )
398	READ ( 13 ) pt_surface_initial_change
399	CASE ( 'pt_vertical_gradient' )
400	READ ( 13 ) pt_vertical_gradient
401	CASE ( 'pt_vertical_gradient_level' )
402	READ ( 13 ) pt_vertical_gradient_level
403	CASE ( 'pt_vertical_gradient_level_ind' )
404	READ ( 13 ) pt_vertical_gradient_level_ind
405	CASE ( 'q_init' )
406	READ ( 13 ) q_init
407	CASE ( 'q_surface' )
408	READ ( 13 ) q_surface
409	CASE ( 'q_surface_initial_change' )
410	READ ( 13 ) q_surface_initial_change
411	CASE ( 'q_vertical_gradient' )
412	READ ( 13 ) q_vertical_gradient
413	CASE ( 'q_vertical_gradient_level' )
414	READ ( 13 ) q_vertical_gradient_level
415	CASE ( 'q_vertical_gradient_level_ind' )
416	READ ( 13 ) q_vertical_gradient_level_ind
417	CASE ( 'radiation' )
418	READ ( 13 ) radiation
419	CASE ( 'random_generator' )
420	READ ( 13 ) random_generator
421	CASE ( 'random_heatflux' )
422	READ ( 13 ) random_heatflux
423	CASE ( 'recycling_width' )
424	READ ( 13 ) recycling_width
425	CASE ( 'rif_max' )
426	READ ( 13 ) rif_max
427	CASE ( 'rif_min' )
428	READ ( 13 ) rif_min
429	CASE ( 'roughness_length' )
430	READ ( 13 ) roughness_length
431	CASE ( 'runnr' )
432	READ ( 13 ) runnr
433	CASE ( 'run_coupled' )
434	READ ( 13 ) run_coupled
435	CASE ( 'sa_init' )
436	READ ( 13 ) sa_init
437	CASE ( 'sa_surface' )
438	READ ( 13 ) sa_surface
439	CASE ( 'sa_vertical_gradient' )
440	READ ( 13 ) sa_vertical_gradient
441	CASE ( 'sa_vertical_gradient_level' )
442	READ ( 13 ) sa_vertical_gradient_level
443	CASE ( 'scalar_advec' )
444	READ ( 13 ) scalar_advec
445	CASE ( 'scalar_exchange_coefficient' )
446	READ ( 13 ) scalar_exchange_coefficient
447	CASE ( 'simulated_time' )
448	READ ( 13 ) simulated_time
449	CASE ( 'surface_heatflux' )
450	READ ( 13 ) surface_heatflux
451	CASE ( 'surface_pressure' )
452	READ ( 13 ) surface_pressure
453	CASE ( 'surface_scalarflux' )
454	READ ( 13 ) surface_scalarflux
455	CASE ( 'surface_waterflux' )
456	READ ( 13 ) surface_waterflux
457	CASE ( 's_surface' )
458	READ ( 13 ) s_surface
459	CASE ( 's_surface_initial_change' )
460	READ ( 13 ) s_surface_initial_change
461	CASE ( 's_vertical_gradient' )
462	READ ( 13 ) s_vertical_gradient
463	CASE ( 's_vertical_gradient_level' )
464	READ ( 13 ) s_vertical_gradient_level
465	CASE ( 'time_coupling' )
466	READ ( 13 ) time_coupling
467	CASE ( 'time_disturb' )
468	READ ( 13 ) time_disturb
469	CASE ( 'time_dopr' )
470	READ ( 13 ) time_dopr
471	CASE ( 'time_dopr_av' )
472	READ ( 13 ) time_dopr_av
473	CASE ( 'time_dopr_listing' )
474	READ ( 13 ) time_dopr_listing
475	CASE ( 'time_dopts' )
476	READ ( 13 ) time_dopts
477	CASE ( 'time_dosp' )
478	READ ( 13 ) time_dosp
479	CASE ( 'time_dots' )
480	READ ( 13 ) time_dots
481	CASE ( 'time_do2d_xy' )
482	READ ( 13 ) time_do2d_xy
483	CASE ( 'time_do2d_xz' )
484	READ ( 13 ) time_do2d_xz
485	CASE ( 'time_do2d_yz' )
486	READ ( 13 ) time_do2d_yz
487	CASE ( 'time_do3d' )
488	READ ( 13 ) time_do3d
489	CASE ( 'time_do_av' )
490	READ ( 13 ) time_do_av
491	CASE ( 'time_do_sla' )
492	READ ( 13 ) time_do_sla
493	CASE ( 'time_dvrp' )
494	READ ( 13 ) time_dvrp
495	CASE ( 'time_restart' )
496	READ ( 13 ) time_restart
497	CASE ( 'time_run_control' )
498	READ ( 13 ) time_run_control
499	CASE ( 'time_since_reference_point' )
500	READ ( 13 ) time_since_reference_point
501	CASE ( 'time_sort_particles' )
502	READ ( 13 ) time_sort_particles
503	CASE ( 'timestep_scheme' )
504	READ ( 13 ) timestep_scheme
505	CASE ( 'topography' )
506	READ ( 13 ) topography
507	CASE ( 'topography_grid_convention' )
508	READ ( 13 ) topography_grid_convention
509	CASE ( 'top_heatflux' )
510	READ ( 13 ) top_heatflux
511	CASE ( 'top_momentumflux_u' )
512	READ ( 13 ) top_momentumflux_u
513	CASE ( 'top_momentumflux_v' )
514	READ ( 13 ) top_momentumflux_v
515	CASE ( 'top_salinityflux' )
516	READ ( 13 ) top_salinityflux
517	CASE ( 'tsc' )
518	READ ( 13 ) tsc
519	CASE ( 'turbulent_inflow' )
520	READ ( 13 ) turbulent_inflow
521	CASE ( 'u_bulk' )
522	READ ( 13 ) u_bulk
523	CASE ( 'u_init' )
524	READ ( 13 ) u_init
525	CASE ( 'u_max' )
526	READ ( 13 ) u_max
527	CASE ( 'u_max_ijk' )
528	READ ( 13 ) u_max_ijk
529	CASE ( 'ug' )
530	READ ( 13 ) ug
531	CASE ( 'ug_surface' )
532	READ ( 13 ) ug_surface
533	CASE ( 'ug_vertical_gradient' )
534	READ ( 13 ) ug_vertical_gradient
535	CASE ( 'ug_vertical_gradient_level' )
536	READ ( 13 ) ug_vertical_gradient_level
537	CASE ( 'ug_vertical_gradient_level_ind' )
538	READ ( 13 ) ug_vertical_gradient_level_ind
539	CASE ( 'ups_limit_e' )
540	READ ( 13 ) ups_limit_e
541	CASE ( 'ups_limit_pt' )
542	READ ( 13 ) ups_limit_pt
543	CASE ( 'ups_limit_u' )
544	READ ( 13 ) ups_limit_u
545	CASE ( 'ups_limit_v' )
546	READ ( 13 ) ups_limit_v
547	CASE ( 'ups_limit_w' )
548	READ ( 13 ) ups_limit_w
549	CASE ( 'use_surface_fluxes' )
550	READ ( 13 ) use_surface_fluxes
551	CASE ( 'use_top_fluxes' )
552	READ ( 13 ) use_top_fluxes
553	CASE ( 'use_ug_for_galilei_tr' )
554	READ ( 13 ) use_ug_for_galilei_tr
555	CASE ( 'use_upstream_for_tke' )
556	READ ( 13 ) use_upstream_for_tke
557	CASE ( 'v_bulk' )
558	READ ( 13 ) v_bulk
559	CASE ( 'v_init' )
560	READ ( 13 ) v_init
561	CASE ( 'v_max' )
562	READ ( 13 ) v_max
563	CASE ( 'v_max_ijk' )
564	READ ( 13 ) v_max_ijk
565	CASE ( 'vg' )
566	READ ( 13 ) vg
567	CASE ( 'vg_surface' )
568	READ ( 13 ) vg_surface
569	CASE ( 'vg_vertical_gradient' )
570	READ ( 13 ) vg_vertical_gradient
571	CASE ( 'vg_vertical_gradient_level' )
572	READ ( 13 ) vg_vertical_gradient_level
573	CASE ( 'vg_vertical_gradient_level_ind' )
574	READ ( 13 ) vg_vertical_gradient_level_ind
575	CASE ( 'volume_flow_area' )
576	READ ( 13 ) volume_flow_area
577	CASE ( 'volume_flow_initial' )
578	READ ( 13 ) volume_flow_initial
579	CASE ( 'wall_adjustment' )
580	READ ( 13 ) wall_adjustment
581	CASE ( 'w_max' )
582	READ ( 13 ) w_max
583	CASE ( 'w_max_ijk' )
584	READ ( 13 ) w_max_ijk
585
586	CASE DEFAULT
587	WRITE( message_string, * ) 'unknown variable named "', &
588	TRIM( variable_chr ), '" found in', &
589	' data from prior run on PE ', myid
590	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
591	END SELECT
592	!
593	!-- Read next string
594	READ ( 13 ) variable_chr
595
596	ENDDO
597
598
599	END SUBROUTINE read_var_list
600
601
602
603	SUBROUTINE read_parts_of_var_list
604
605	!------------------------------------------------------------------------------!
606	! Description:
607	! ------------
608	! Skipping the global control variables from restart-file (binary format)
609	! except some informations needed when reading restart data from a previous
610	! run which used a smaller total domain or/and a different domain decomposition.
611	!------------------------------------------------------------------------------!
612
613	USE arrays_3d
614	USE control_parameters
615	USE indices
616	USE pegrid
617	USE statistics
618
619	IMPLICIT NONE
620
621	CHARACTER (LEN=10) :: version_on_file
622	CHARACTER (LEN=30) :: variable_chr
623
624	INTEGER :: idum, max_pr_user_on_file, nz_on_file, &
625	statistic_regions_on_file, tmp_mpru, tmp_sr
626
627	REAL, DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
628	REAL, DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
629
630
631	CALL check_open( 13 )
632
633	WRITE (9,*) 'rpovl: after check open 13'
634	CALL local_flush( 9 )
635	READ ( 13 ) version_on_file
636
637	!
638	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
639	!-- run
640	READ ( 13 ) variable_chr
641	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
642	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
643	'run on PE ', myid
644	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
645	ENDIF
646	READ ( 13 ) numprocs_previous_run
647
648	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
649	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
650	ENDIF
651
652	READ ( 13 ) variable_chr
653	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
654	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
655	'prior run on PE ', myid
656	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
657	ENDIF
658	READ ( 13 ) hor_index_bounds_previous_run
659
660	!
661	!-- Read vertical number of gridpoints and number of different areas used
662	!-- for computing statistics. Allocate arrays depending on these values,
663	!-- which are needed for the following read instructions.
664	READ ( 13 ) variable_chr
665	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
666	message_string = 'nz not found in restart data file'
667	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
668	ENDIF
669	READ ( 13 ) nz_on_file
670	IF ( nz_on_file /= nz ) THEN
671	WRITE( message_string, * ) 'mismatch concerning number of ', &
672	'gridpoints along z', &
673	'&nz on file = "', nz_on_file, '"', &
674	'&nz from run = "', nz, '"'
675	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
676	ENDIF
677
678	READ ( 13 ) variable_chr
679	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
680	message_string = 'max_pr_user not found in restart data file'
681	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
682	ENDIF
683	READ ( 13 ) max_pr_user_on_file
684	IF ( max_pr_user_on_file /= max_pr_user ) THEN
685	WRITE( message_string, * ) 'number of user profiles on res', &
686	'tart data file differs from the current ', &
687	'run&max_pr_user on file = "', &
688	max_pr_user_on_file, '"', &
689	'&max_pr_user from run = "', &
690	max_pr_user, '"'
691	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
692	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
693	ELSE
694	tmp_mpru = max_pr_user
695	ENDIF
696
697	READ ( 13 ) variable_chr
698	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
699	message_string = 'statistic_regions not found in restart data file'
700	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
701	ENDIF
702	READ ( 13 ) statistic_regions_on_file
703	IF ( statistic_regions_on_file /= statistic_regions ) THEN
704	WRITE( message_string, * ) 'statistic regions on restart data file ',&
705	'differ from the current run', &
706	'&statistic regions on file = "', &
707	statistic_regions_on_file, '"', &
708	'&statistic regions from run = "', &
709	statistic_regions, '"', &
710	'&statistic data may be lost!'
711	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
712	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
713	ELSE
714	tmp_sr = statistic_regions
715	ENDIF
716
717
718	!
719	!-- Now read and check some control parameters and skip the rest
720	!-- The total domain of the pre-run must not be smaller than the subdomain
721	!-- of the current run, because the mapping of data from the pre-run does
722	!-- not work for this case.
723	WRITE (9,*) 'wpovl: begin reading variables'
724	CALL local_flush( 9 )
725	READ ( 13 ) variable_chr
726
727	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
728
729	SELECT CASE ( TRIM( variable_chr ) )
730
731	CASE ( 'average_count_pr' )
732	READ ( 13 ) average_count_pr
733	IF ( average_count_pr /= 0 ) THEN
734	WRITE( message_string, * ) 'inflow profiles not temporally ', &
735	'averaged. &Averaging will be done now using ', &
736	average_count_pr, ' samples.'
737	CALL message( 'read_parts_of_var_list', 'PA0309', &
738	0, 1, 0, 6, 0 )
739	ENDIF
740
741	CASE ( 'hom' )
742	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
743	0:statistic_regions_on_file) )
744	READ ( 13 ) hom_on_file
745	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
746	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
747	DEALLOCATE( hom_on_file )
748
749	CASE ( 'hom_sum' )
750	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
751	0:statistic_regions_on_file) )
752	READ ( 13 ) hom_sum_on_file
753	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
754	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
755	DEALLOCATE( hom_sum_on_file )
756
757	CASE ( 'nx' )
758	READ ( 13 ) nx_on_file
759
760	CASE ( 'ny' )
761	READ ( 13 ) ny_on_file
762
763
764	CASE DEFAULT
765
766	READ ( 13 ) idum
767
768	END SELECT
769
770	READ ( 13 ) variable_chr
771
772	ENDDO
773
774	!
775	!-- Calculate the temporal average of vertical profiles, if neccessary
776	IF ( average_count_pr /= 0 ) THEN
777	hom_sum = hom_sum / REAL( average_count_pr )
778	ENDIF
779
780
781	END SUBROUTINE read_parts_of_var_list
782
783
784
785	SUBROUTINE skip_var_list
786
787	!------------------------------------------------------------------------------!
788	! Description:
789	! ------------
790	! Skipping the global control variables from restart-file (binary format)
791	!------------------------------------------------------------------------------!
792
793	IMPLICIT NONE
794
795	CHARACTER (LEN=10) :: version_on_file
796	CHARACTER (LEN=30) :: variable_chr
797
798	INTEGER :: idum
799
800
801	WRITE (9,*) 'skipvl #1'
802	CALL local_flush( 9 )
803	READ ( 13 ) version_on_file
804
805	WRITE (9,*) 'skipvl before variable_chr'
806	CALL local_flush( 9 )
807	READ ( 13 ) variable_chr
808	WRITE (9,*) 'skipvl after variable_chr'
809	CALL local_flush( 9 )
810
811	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
812
813	WRITE (9,*) 'skipvl chr = ', variable_chr
814	CALL local_flush( 9 )
815	READ ( 13 ) idum
816	READ ( 13 ) variable_chr
817
818	ENDDO
819	WRITE (9,*) 'skipvl last'
820	CALL local_flush( 9 )
821
822
823	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |