Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2845

Last change on this file since 2845 was 2818, checked in by maronga, 7 years ago
improvements in spinup mechanism
Property svn:keywords set to `Id`
File size: 41.9 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2818 2018-02-19 16:42:36Z raasch $
[2818]	27	! Added spinup_time to allow for restarts with spinup in precursor run.
	28	!
	29	! 2776 2018-01-31 10:44:42Z Giersch
[2776]	30	! Change skip_var_list: Skipping of module related parameter is only necessary
	31	! if restart data was outputted at the end of the precursor run
	32	!
	33	! 2718 2018-01-02 08:49:38Z maronga
[2716]	34	! Corrected "Former revisions" section
	35	!
	36	! 2696 2017-12-14 17:12:51Z kanani
	37	! Change in file header (GPL part)
[2696]	38	! + rans_mode, turbulence_closure (TG)
	39	!
	40	! 2576 2017-10-24 13:49:46Z Giersch
[2576]	41	! * end * marks the end of the standard parameter list of restart files
	42	! like it was before revision 2563. To skip also the variables of the modules
	43	! wind_turbine_model_mod, flight_mod and synthetic_turbulence_generator_mod
	44	! three new functions has to be defined which are called in skip_var_list.
	45	! Adapted binary version number
	46	!
	47	! 2575 2017-10-24 09:57:58Z maronga
[2575]	48	! Renamed phi -> latitude, added longitude
	49	!
	50	! 2563 2017-10-19 15:36:10Z Giersch
[2563]	51	! CALL stg_read_restart_data moved to synthetic_turbulence_generator_mod and
	52	! CALL flight_read_restart_data moved to virtual_flights_mod. Furthermore
	53	! * end default * marks the end of the standard parameter list of restart
	54	! files and * end * marks the end of all parameter including module
	55	! parameter. Therefore the call of flight_skip_var_list becomes unnecessary.
	56	!
	57	! 2372 2017-08-25 12:37:32Z sward
[2372]	58	! y_shift added to vars, version no. increased
	59	!
	60	! 2365 2017-08-21 14:59:59Z kanani
[2365]	61	! Vertical grid nesting implemented (SadiqHuq)
	62	!
	63	! 2339 2017-08-07 13:55:26Z gronemeier
[2339]	64	! corrected timestamp in header
	65	!
	66	! 2338 2017-08-07 12:15:38Z gronemeier
[2338]	67	! Modularize 1D model
	68	!
[2339]	69	! 2320 2017-07-21 12:47:43Z suehring
[2320]	70	! Formatting adjustment
	71	!
	72	! 2265 2017-06-08 16:58:28Z schwenkel
[2265]	73	! Unused variables removed.
	74	!
	75	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	76	! Implemented synthetic turbulence generator
[2233]	77	!
[2259]	78	! 2233 2017-05-30 18:08:54Z suehring
	79	!
[2233]	80	! 2232 2017-05-30 17:47:52Z suehring
[2232]	81	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	82	! wall_salinityflux
[2259]	83	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	84	! tunnel_wall_depth
	85	!
[2043]	86	! 2042 2016-11-02 13:47:31Z suehring
	87	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	88	!
[2001]	89	! 2000 2016-08-20 18:09:15Z knoop
	90	! Forced header and separation lines into 80 columns
[2259]	91	!
[1993]	92	! 1992 2016-08-12 15:14:59Z suehring
	93	! top_scalarflux added
[2259]	94	!
[1961]	95	! 1960 2016-07-12 16:34:24Z suehring
	96	! Separate humidity and passive scalar
	97	! Remove unused variables from ONLY list
	98	!
[1958]	99	! 1957 2016-07-07 10:43:48Z suehring
	100	! flight module added
	101	!
[1851]	102	! 1849 2016-04-08 11:33:18Z hoffmann
	103	! Adapted for modularization of microphysics
	104	!
[1834]	105	! 1833 2016-04-07 14:23:03Z raasch
	106	! spectra_mod added
	107	!
[1832]	108	! 1831 2016-04-07 13:15:51Z hoffmann
	109	! turbulence renamed collision_turbulence, drizzle renamed
	110	! cloud_water_sedimentation
	111	!
[1809]	112	! 1808 2016-04-05 19:44:00Z raasch
	113	! test output removed
	114	!
[1784]	115	! 1783 2016-03-06 18:36:17Z raasch
	116	! netcdf module name changed + related changes
	117	!
[1700]	118	! 1699 2015-10-29 08:02:35Z maronga
	119	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	120	!
[1692]	121	! 1691 2015-10-26 16:17:44Z maronga
[2259]	122	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	123	! output of prandtl_layer and rif_min, rif_max.
[2259]	124	!
[1683]	125	! 1682 2015-10-07 23:56:08Z knoop
	126	! Code annotations made doxygen readable
[2259]	127	!
[1616]	128	! 1615 2015-07-08 18:49:19Z suehring
	129	! Enable turbulent inflow for passive_scalar and humidity
	130	!
[1586]	131	! 1585 2015-04-30 07:05:52Z maronga
	132	! Adapted for RRTMG
[2259]	133	!
[1561]	134	! 1560 2015-03-06 10:48:54Z keck
	135	! +recycling_yshift
[2259]	136	!
[1523]	137	! 1522 2015-01-14 10:53:12Z keck
	138	! added query for checking if the advection scheme in the restart run is the
	139	! same as the advection scheme in the corresponding initial run
[2259]	140	!
[1503]	141	! 1502 2014-12-03 18:22:31Z kanani
[2259]	142	! Canopy module and parameters removed (parameters are always read from
[1503]	143	! canopy_par NAMELIST for initial and restart runs)
[2259]	144	!
[1497]	145	! 1496 2014-12-02 17:25:50Z maronga
	146	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	147	!
[1485]	148	! 1484 2014-10-21 10:53:05Z kanani
[1484]	149	! Changes in the course of the canopy-model modularization:
	150	! parameters alpha_lad, beta_lad, lai_beta added,
	151	! module plant_canopy_model_mod added,
	152	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	153	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	154	!
[1323]	155	! 1322 2014-03-20 16:38:49Z raasch
	156	! REAL functions provided with KIND-attribute
	157	!
[1321]	158	! 1320 2014-03-20 08:40:49Z raasch
[1320]	159	! ONLY-attribute added to USE-statements,
	160	! kind-parameters added to all INTEGER and REAL declaration statements,
	161	! kinds are defined in new module kinds,
	162	! old module precision_kind is removed,
	163	! revision history before 2012 removed,
	164	! comment fields (!:) to be used for variable explanations added to
	165	! all variable declaration statements
[1054]	166	!
[1309]	167	! 1308 2014-03-13 14:58:42Z fricke
	168	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	169	! +do3d_time_count
	170	!
[1254]	171	! 1253 2013-11-07 10:48:12Z fricke
[2259]	172	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	173	! is zero for initializing_actions = 'cyclic_fill'
	174	!
[1242]	175	! 1241 2013-10-30 11:36:58Z heinze
	176	! +nudging
	177	! +large_scale_forcing
	178	!
[1196]	179	! 1195 2013-07-01 12:27:57Z heinze
	180	! Bugfix: allocate ref_state
	181	!
[1182]	182	! 1179 2013-06-14 05:57:58Z raasch
	183	! +ref_state
	184	!
[1116]	185	! 1115 2013-03-26 18:16:16Z hoffmann
	186	! unused variables removed
	187	!
[1093]	188	! 1092 2013-02-02 11:24:22Z raasch
	189	! unused variables removed
	190	!
[1066]	191	! 1065 2012-11-22 17:42:36Z hoffmann
	192	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	193	! -mu_constant, mu_constant_value
	194	!
[1054]	195	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	196	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	197	! of the two-moment cloud physics scheme:
	198	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	199	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	200	! +surface_waterflux_*
[601]	201	!
[2259]	202	! in addition, steering parameters parameters of the two-moment cloud physics
	203	! scheme:
[1053]	204	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	205	!
[1037]	206	! 1036 2012-10-22 13:43:42Z raasch
	207	! code put under GPL (PALM 3.9)
	208	!
[1017]	209	! 1015 2012-09-27 09:23:24Z raasch
	210	! -adjust_mixing_length
	211	!
[1004]	212	! 1003 2012-09-14 14:35:53Z raasch
	213	! -grid_matching
	214	!
[1002]	215	! 1001 2012-09-13 14:08:46Z raasch
	216	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	217	! overshoot_limit_, ups_limit_
	218	!
[979]	219	! 978 2012-08-09 08:28:32Z fricke
	220	! -km_damp_max, outflow_damping_width
	221	! +pt_damping_factor, pt_damping_width
	222	! +z0h_factor
	223	!
[941]	224	! 940 2012-07-09 14:31:00Z raasch
	225	! +neutral
	226	!
[928]	227	! 927 2012-06-06 19:15:04Z raasch
	228	! +masking_method
	229	!
[850]	230	! 849 2012-03-15 10:35:09Z raasch
	231	! first_call_advec_particles renamed first_call_lpm
	232	!
[826]	233	! 824 2012-02-17 09:09:57Z raasch
	234	! +curvature_solution_effects
	235	!
[1]	236	! Revision 1.1 1998/03/18 20:18:48 raasch
	237	! Initial revision
	238	!
	239	!
	240	! Description:
	241	! ------------
[1682]	242	!> Reading values of global control variables from restart-file (binary format)
[1]	243	!------------------------------------------------------------------------------!
[1682]	244	SUBROUTINE read_var_list
[1]	245
[2259]	246
[1320]	247	USE arrays_3d, &
[1484]	248	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	249	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	250
[87]	251	USE control_parameters
[1320]	252
	253	USE grid_variables, &
	254	ONLY: dx, dy
	255
	256	USE indices, &
	257	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	258
[1849]	259	USE microphysics_mod, &
	260	ONLY: c_sedimentation, collision_turbulence, &
	261	cloud_water_sedimentation, limiter_sedimentation, &
	262	nc_const, ventilation_effect
	263
[2338]	264	USE model_1d_mod, &
[1320]	265	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	266
[1783]	267	USE netcdf_interface, &
	268	ONLY: netcdf_precision, output_for_t0
[1320]	269
	270	USE particle_attributes, &
[2265]	271	ONLY: curvature_solution_effects
[1320]	272
[1]	273	USE pegrid
	274
[1585]	275	USE radiation_model_mod, &
[1833]	276	ONLY: time_radiation
[1585]	277
[1833]	278	USE spectra_mod, &
	279	ONLY: average_count_sp
	280
[1320]	281	USE statistics, &
	282	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	283	v_max, v_max_ijk, w_max, w_max_ijk
	284
[2365]	285	USE vertical_nesting_mod, &
	286	ONLY: vnest_init
	287
[1]	288	IMPLICIT NONE
	289
	290	CHARACTER (LEN=10) :: binary_version, version_on_file
	291	CHARACTER (LEN=30) :: variable_chr
[87]	292
[143]	293
[1]	294	CALL check_open( 13 )
	295
	296	!
	297	!-- Make version number check first
	298	READ ( 13 ) version_on_file
[2818]	299	binary_version = '4.6'
[1]	300	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	301	WRITE( message_string, * ) 'version mismatch concerning control ', &
	302	'variables', &
	303	'&version on file = "', &
	304	TRIM( version_on_file ), '"', &
	305	'&version on program = "', &
	306	TRIM( binary_version ), '"'
	307	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	308	ENDIF
	309
	310	!
[145]	311	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	312	!-- run
	313	READ ( 13 ) variable_chr
	314	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	315	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	316	'run on PE ', myid
[257]	317	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	318	ENDIF
	319	READ ( 13 ) numprocs_previous_run
	320
[146]	321	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	322	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	323	ENDIF
[145]	324
	325	READ ( 13 ) variable_chr
	326	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	327	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	328	'prior run on PE ', myid
	329	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	330	ENDIF
	331	READ ( 13 ) hor_index_bounds_previous_run
	332
	333	!
[1]	334	!-- Read vertical number of gridpoints and number of different areas used
	335	!-- for computing statistics. Allocate arrays depending on these values,
	336	!-- which are needed for the following read instructions.
	337	READ ( 13 ) variable_chr
	338	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	339	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	340	myid
	341	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	342	ENDIF
	343	READ ( 13 ) nz
[87]	344
[1]	345	READ ( 13 ) variable_chr
[87]	346	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	347	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	348	'prior run on PE ', myid
[257]	349	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	350	ENDIF
[159]	351	READ ( 13 ) max_pr_user ! This value is checked against the number of
	352	! user profiles given for the current run
	353	! in routine user_parin (it has to match)
[87]	354
	355	READ ( 13 ) variable_chr
[1]	356	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	357	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	358	'prior run on PE ', myid
[257]	359	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	360	ENDIF
	361	READ ( 13 ) statistic_regions
[146]	362	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	363	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	364	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	365	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	366	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	367	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	368	ENDIF
[1]	369
	370	!
	371	!-- Now read all control parameters:
	372	!-- Caution: When the following read instructions have been changed, the
	373	!-- ------- version number stored in the variable binary_version has to be
	374	!-- increased. The same changes must also be done in write_var_list.
	375	READ ( 13 ) variable_chr
[2576]	376	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
[1]	377
	378	SELECT CASE ( TRIM( variable_chr ) )
	379
	380	CASE ( 'advected_distance_x' )
	381	READ ( 13 ) advected_distance_x
	382	CASE ( 'advected_distance_y' )
	383	READ ( 13 ) advected_distance_y
	384	CASE ( 'alpha_surface' )
	385	READ ( 13 ) alpha_surface
	386	CASE ( 'average_count_pr' )
	387	READ ( 13 ) average_count_pr
	388	CASE ( 'average_count_sp' )
	389	READ ( 13 ) average_count_sp
	390	CASE ( 'average_count_3d' )
	391	READ ( 13 ) average_count_3d
	392	CASE ( 'bc_e_b' )
	393	READ ( 13 ) bc_e_b
	394	CASE ( 'bc_lr' )
	395	READ ( 13 ) bc_lr
	396	CASE ( 'bc_ns' )
	397	READ ( 13 ) bc_ns
	398	CASE ( 'bc_p_b' )
	399	READ ( 13 ) bc_p_b
	400	CASE ( 'bc_p_t' )
	401	READ ( 13 ) bc_p_t
	402	CASE ( 'bc_pt_b' )
	403	READ ( 13 ) bc_pt_b
	404	CASE ( 'bc_pt_t' )
	405	READ ( 13 ) bc_pt_t
	406	CASE ( 'bc_pt_t_val' )
	407	READ ( 13 ) bc_pt_t_val
	408	CASE ( 'bc_q_b' )
	409	READ ( 13 ) bc_q_b
	410	CASE ( 'bc_q_t' )
	411	READ ( 13 ) bc_q_t
	412	CASE ( 'bc_q_t_val' )
	413	READ ( 13 ) bc_q_t_val
	414	CASE ( 'bc_s_b' )
	415	READ ( 13 ) bc_s_b
	416	CASE ( 'bc_s_t' )
	417	READ ( 13 ) bc_s_t
[95]	418	CASE ( 'bc_sa_t' )
	419	READ ( 13 ) bc_sa_t
[1]	420	CASE ( 'bc_uv_b' )
	421	READ ( 13 ) bc_uv_b
	422	CASE ( 'bc_uv_t' )
	423	READ ( 13 ) bc_uv_t
[95]	424	CASE ( 'bottom_salinityflux' )
	425	READ ( 13 ) bottom_salinityflux
[1]	426	CASE ( 'building_height' )
	427	READ ( 13 ) building_height
	428	CASE ( 'building_length_x' )
	429	READ ( 13 ) building_length_x
	430	CASE ( 'building_length_y' )
	431	READ ( 13 ) building_length_y
	432	CASE ( 'building_wall_left' )
	433	READ ( 13 ) building_wall_left
	434	CASE ( 'building_wall_south' )
	435	READ ( 13 ) building_wall_south
[600]	436	CASE ( 'call_psolver_at_all_substeps' )
	437	READ ( 13 ) call_psolver_at_all_substeps
[240]	438	CASE ( 'canyon_height' )
	439	READ ( 13 ) canyon_height
	440	CASE ( 'canyon_width_x' )
	441	READ ( 13 ) canyon_width_x
	442	CASE ( 'canyon_width_y' )
	443	READ ( 13 ) canyon_width_y
	444	CASE ( 'canyon_wall_left' )
	445	READ ( 13 ) canyon_wall_left
	446	CASE ( 'canyon_wall_south' )
	447	READ ( 13 ) canyon_wall_south
[1065]	448	CASE ( 'c_sedimentation' )
	449	READ ( 13 ) c_sedimentation
[600]	450	CASE ( 'cfl_factor' )
	451	READ ( 13 ) cfl_factor
[1]	452	CASE ( 'cloud_droplets' )
	453	READ ( 13 ) cloud_droplets
	454	CASE ( 'cloud_physics' )
	455	READ ( 13 ) cloud_physics
[1053]	456	CASE ( 'cloud_scheme' )
	457	READ ( 13 ) cloud_scheme
[622]	458	CASE ( 'collective_wait' )
	459	READ ( 13 ) collective_wait
[1]	460	CASE ( 'conserve_volume_flow' )
	461	READ ( 13 ) conserve_volume_flow
[241]	462	CASE ( 'conserve_volume_flow_mode' )
	463	READ ( 13 ) conserve_volume_flow_mode
[1691]	464	CASE ( 'constant_flux_layer' )
	465	READ ( 13 ) constant_flux_layer
[291]	466	CASE ( 'coupling_start_time' )
	467	READ ( 13 ) coupling_start_time
[1]	468	CASE ( 'current_timestep_number' )
	469	READ ( 13 ) current_timestep_number
[824]	470	CASE ( 'curvature_solution_effects' )
	471	READ ( 13 ) curvature_solution_effects
[600]	472	CASE ( 'cycle_mg' )
	473	READ ( 13 ) cycle_mg
[1]	474	CASE ( 'damp_level_1d' )
	475	READ ( 13 ) damp_level_1d
	476	CASE ( 'dissipation_1d' )
	477	READ ( 13 ) dissipation_1d
[1308]	478	CASE ( 'do2d_xy_time_count' )
	479	READ ( 13 ) do2d_xy_time_count
	480	CASE ( 'do2d_xz_time_count' )
	481	READ ( 13 ) do2d_xz_time_count
	482	CASE ( 'do2d_yz_time_count' )
	483	READ ( 13 ) do2d_yz_time_count
	484	CASE ( 'do3d_time_count' )
	485	READ ( 13 ) do3d_time_count
[240]	486	CASE ( 'dp_external' )
	487	READ ( 13 ) dp_external
	488	CASE ( 'dp_level_b' )
	489	READ ( 13 ) dp_level_b
	490	CASE ( 'dp_smooth' )
	491	READ ( 13 ) dp_smooth
	492	CASE ( 'dpdxy' )
	493	READ ( 13 ) dpdxy
[1831]	494	CASE ( 'cloud_water_sedimentation' )
	495	READ ( 13 ) cloud_water_sedimentation
[1]	496	CASE ( 'dt_pr_1d' )
	497	READ ( 13 ) dt_pr_1d
	498	CASE ( 'dt_run_control_1d' )
	499	READ ( 13 ) dt_run_control_1d
	500	CASE ( 'dt_3d' )
	501	READ ( 13 ) dt_3d
	502	CASE ( 'dvrp_filecount' )
	503	READ ( 13 ) dvrp_filecount
	504	CASE ( 'dx' )
	505	READ ( 13 ) dx
	506	CASE ( 'dy' )
	507	READ ( 13 ) dy
	508	CASE ( 'dz' )
	509	READ ( 13 ) dz
	510	CASE ( 'dz_max' )
	511	READ ( 13 ) dz_max
	512	CASE ( 'dz_stretch_factor' )
	513	READ ( 13 ) dz_stretch_factor
	514	CASE ( 'dz_stretch_level' )
	515	READ ( 13 ) dz_stretch_level
	516	CASE ( 'e_min' )
	517	READ ( 13 ) e_min
	518	CASE ( 'end_time_1d' )
	519	READ ( 13 ) end_time_1d
	520	CASE ( 'fft_method' )
	521	READ ( 13 ) fft_method
[849]	522	CASE ( 'first_call_lpm' )
	523	READ ( 13 ) first_call_lpm
[1]	524	CASE ( 'galilei_transformation' )
	525	READ ( 13 ) galilei_transformation
	526	CASE ( 'hom' )
	527	READ ( 13 ) hom
[143]	528	CASE ( 'hom_sum' )
	529	READ ( 13 ) hom_sum
[151]	530	CASE ( 'humidity' )
	531	READ ( 13 ) humidity
	532	CASE ( 'inflow_damping_factor' )
	533	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	534	ALLOCATE( inflow_damping_factor(0:nz+1) )
	535	ENDIF
	536	READ ( 13 ) inflow_damping_factor
	537	CASE ( 'inflow_damping_height' )
	538	READ ( 13 ) inflow_damping_height
	539	CASE ( 'inflow_damping_width' )
	540	READ ( 13 ) inflow_damping_width
[1]	541	CASE ( 'inflow_disturbance_begin' )
	542	READ ( 13 ) inflow_disturbance_begin
	543	CASE ( 'inflow_disturbance_end' )
	544	READ ( 13 ) inflow_disturbance_end
	545	CASE ( 'km_constant' )
	546	READ ( 13 ) km_constant
[1241]	547	CASE ( 'large_scale_forcing' )
	548	READ ( 13 ) large_scale_forcing
[2320]	549	CASE ( 'large_scale_subsidence' )
[411]	550	READ ( 13 ) large_scale_subsidence
[1065]	551	CASE ( 'limiter_sedimentation' )
	552	READ ( 13 ) limiter_sedimentation
[63]	553	CASE ( 'loop_optimization' )
	554	READ ( 13 ) loop_optimization
[927]	555	CASE ( 'masking_method' )
	556	READ ( 13 ) masking_method
[151]	557	CASE ( 'mean_inflow_profiles' )
	558	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	559	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	560	ENDIF
	561	READ ( 13 ) mean_inflow_profiles
[600]	562	CASE ( 'mg_cycles' )
	563	READ ( 13 ) mg_cycles
	564	CASE ( 'mg_switch_to_pe0_level' )
	565	READ ( 13 ) mg_switch_to_pe0_level
[1]	566	CASE ( 'mixing_length_1d' )
	567	READ ( 13 ) mixing_length_1d
	568	CASE ( 'momentum_advec' )
	569	READ ( 13 ) momentum_advec
[1691]	570	CASE ( 'most_method' )
	571	READ ( 13 ) most_method
[1115]	572	CASE ( 'nc_const' )
	573	READ ( 13 ) nc_const
[1]	574	CASE ( 'netcdf_precision' )
	575	READ ( 13 ) netcdf_precision
[940]	576	CASE ( 'neutral' )
	577	READ ( 13 ) neutral
[600]	578	CASE ( 'ngsrb' )
	579	READ ( 13 ) ngsrb
	580	CASE ( 'nsor' )
	581	READ ( 13 ) nsor
[1]	582	CASE ( 'nsor_ini' )
	583	READ ( 13 ) nsor_ini
[1241]	584	CASE ( 'nudging' )
	585	READ ( 13 ) nudging
[1957]	586	CASE ( 'num_leg' )
	587	READ ( 13 ) num_leg
[1]	588	CASE ( 'nx' )
	589	READ ( 13 ) nx
[147]	590	nx_on_file = nx
[1]	591	CASE ( 'ny' )
	592	READ ( 13 ) ny
[147]	593	ny_on_file = ny
[94]	594	CASE ( 'ocean' )
	595	READ ( 13 ) ocean
[1]	596	CASE ( 'old_dt' )
	597	READ ( 13 ) old_dt
	598	CASE ( 'omega' )
	599	READ ( 13 ) omega
[600]	600	CASE ( 'omega_sor' )
	601	READ ( 13 ) omega_sor
[345]	602	CASE ( 'output_for_t0' )
	603	READ (13) output_for_t0
[1]	604	CASE ( 'passive_scalar' )
	605	READ ( 13 ) passive_scalar
[2575]	606	CASE ( 'latitude' )
	607	READ ( 13 ) latitude
	608	CASE ( 'longitude' )
	609	READ ( 13 ) longitude
[600]	610	CASE ( 'prandtl_number' )
	611	READ ( 13 ) prandtl_number
[1]	612	CASE ( 'precipitation' )
	613	READ ( 13 ) precipitation
[600]	614	CASE ( 'psolver' )
	615	READ ( 13 ) psolver
[978]	616	CASE ( 'pt_damping_factor' )
	617	READ ( 13 ) pt_damping_factor
	618	CASE ( 'pt_damping_width' )
	619	READ ( 13 ) pt_damping_width
[1]	620	CASE ( 'pt_init' )
	621	READ ( 13 ) pt_init
[57]	622	CASE ( 'pt_reference' )
	623	READ ( 13 ) pt_reference
[1]	624	CASE ( 'pt_surface' )
	625	READ ( 13 ) pt_surface
	626	CASE ( 'pt_surface_initial_change' )
	627	READ ( 13 ) pt_surface_initial_change
	628	CASE ( 'pt_vertical_gradient' )
	629	READ ( 13 ) pt_vertical_gradient
	630	CASE ( 'pt_vertical_gradient_level' )
	631	READ ( 13 ) pt_vertical_gradient_level
	632	CASE ( 'pt_vertical_gradient_level_ind' )
	633	READ ( 13 ) pt_vertical_gradient_level_ind
	634	CASE ( 'q_init' )
	635	READ ( 13 ) q_init
	636	CASE ( 'q_surface' )
	637	READ ( 13 ) q_surface
	638	CASE ( 'q_surface_initial_change' )
	639	READ ( 13 ) q_surface_initial_change
	640	CASE ( 'q_vertical_gradient' )
	641	READ ( 13 ) q_vertical_gradient
	642	CASE ( 'q_vertical_gradient_level' )
	643	READ ( 13 ) q_vertical_gradient_level
	644	CASE ( 'q_vertical_gradient_level_ind' )
	645	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	646	CASE ( 'cloud_top_radiation' )
	647	READ ( 13 ) cloud_top_radiation
[1]	648	CASE ( 'random_generator' )
	649	READ ( 13 ) random_generator
	650	CASE ( 'random_heatflux' )
	651	READ ( 13 ) random_heatflux
[2696]	652	CASE ( 'rans_mode' )
	653	READ ( 13 ) rans_mode
[600]	654	CASE ( 'rayleigh_damping_factor' )
	655	READ ( 13 ) rayleigh_damping_factor
	656	CASE ( 'rayleigh_damping_height' )
	657	READ ( 13 ) rayleigh_damping_height
[151]	658	CASE ( 'recycling_width' )
	659	READ ( 13 ) recycling_width
[1560]	660	CASE ( 'recycling_yshift' )
	661	READ ( 13 ) recycling_yshift
[1179]	662	CASE ( 'reference_state' )
	663	READ ( 13 ) reference_state
	664	CASE ( 'ref_state' )
	665	READ ( 13 ) ref_state
[600]	666	CASE ( 'residual_limit' )
	667	READ ( 13 ) residual_limit
[1]	668	CASE ( 'roughness_length' )
	669	READ ( 13 ) roughness_length
	670	CASE ( 'runnr' )
	671	READ ( 13 ) runnr
[291]	672	CASE ( 'run_coupled' )
	673	READ ( 13 ) run_coupled
[1960]	674	CASE ( 's_init' )
	675	READ ( 13 ) s_init
	676	CASE ( 's_surface' )
	677	READ ( 13 ) s_surface
	678	CASE ( 's_surface_initial_change' )
	679	READ ( 13 ) s_surface_initial_change
	680	CASE ( 's_vertical_gradient' )
	681	READ ( 13 ) s_vertical_gradient
	682	CASE ( 's_vertical_gradient_level' )
	683	READ ( 13 ) s_vertical_gradient_level
	684	CASE ( 's_vertical_gradient_level_ind' )
[2259]	685	READ ( 13 ) s_vertical_gradient_level_ind
[94]	686	CASE ( 'sa_init' )
	687	READ ( 13 ) sa_init
	688	CASE ( 'sa_surface' )
	689	READ ( 13 ) sa_surface
	690	CASE ( 'sa_vertical_gradient' )
	691	READ ( 13 ) sa_vertical_gradient
	692	CASE ( 'sa_vertical_gradient_level' )
	693	READ ( 13 ) sa_vertical_gradient_level
[1]	694	CASE ( 'scalar_advec' )
	695	READ ( 13 ) scalar_advec
	696	CASE ( 'simulated_time' )
	697	READ ( 13 ) simulated_time
[2818]	698	CASE ( 'spinup_time' )
	699	READ ( 13 ) spinup_time
[1]	700	CASE ( 'surface_heatflux' )
	701	READ ( 13 ) surface_heatflux
	702	CASE ( 'surface_pressure' )
	703	READ ( 13 ) surface_pressure
	704	CASE ( 'surface_scalarflux' )
[2259]	705	READ ( 13 ) surface_scalarflux
[1]	706	CASE ( 'surface_waterflux' )
[2259]	707	READ ( 13 ) surface_waterflux
[102]	708	CASE ( 'time_coupling' )
	709	READ ( 13 ) time_coupling
[1]	710	CASE ( 'time_disturb' )
	711	READ ( 13 ) time_disturb
[1502]	712	CASE ( 'time_dopr' )
[1]	713	READ ( 13 ) time_dopr
[587]	714	CASE ( 'time_domask' )
	715	READ ( 13 ) time_domask
[1]	716	CASE ( 'time_dopr_av' )
	717	READ ( 13 ) time_dopr_av
	718	CASE ( 'time_dopr_listing' )
	719	READ ( 13 ) time_dopr_listing
	720	CASE ( 'time_dopts' )
	721	READ ( 13 ) time_dopts
	722	CASE ( 'time_dosp' )
	723	READ ( 13 ) time_dosp
	724	CASE ( 'time_dots' )
	725	READ ( 13 ) time_dots
	726	CASE ( 'time_do2d_xy' )
	727	READ ( 13 ) time_do2d_xy
	728	CASE ( 'time_do2d_xz' )
	729	READ ( 13 ) time_do2d_xz
	730	CASE ( 'time_do2d_yz' )
	731	READ ( 13 ) time_do2d_yz
	732	CASE ( 'time_do3d' )
	733	READ ( 13 ) time_do3d
	734	CASE ( 'time_do_av' )
	735	READ ( 13 ) time_do_av
	736	CASE ( 'time_do_sla' )
	737	READ ( 13 ) time_do_sla
	738	CASE ( 'time_dvrp' )
	739	READ ( 13 ) time_dvrp
[1585]	740	CASE ( 'time_radiation' )
	741	READ ( 13 ) time_radiation
[1]	742	CASE ( 'time_restart' )
	743	READ ( 13 ) time_restart
	744	CASE ( 'time_run_control' )
	745	READ ( 13 ) time_run_control
[291]	746	CASE ( 'time_since_reference_point' )
	747	READ ( 13 ) time_since_reference_point
[1]	748	CASE ( 'timestep_scheme' )
	749	READ ( 13 ) timestep_scheme
	750	CASE ( 'topography' )
	751	READ ( 13 ) topography
[256]	752	CASE ( 'topography_grid_convention' )
	753	READ ( 13 ) topography_grid_convention
[19]	754	CASE ( 'top_heatflux' )
	755	READ ( 13 ) top_heatflux
[102]	756	CASE ( 'top_momentumflux_u' )
	757	READ ( 13 ) top_momentumflux_u
	758	CASE ( 'top_momentumflux_v' )
	759	READ ( 13 ) top_momentumflux_v
[94]	760	CASE ( 'top_salinityflux' )
	761	READ ( 13 ) top_salinityflux
[1992]	762	CASE ( 'top_scalarflux' )
	763	READ ( 13 ) top_scalarflux
[1]	764	CASE ( 'tsc' )
	765	READ ( 13 ) tsc
[1831]	766	CASE ( 'collision_turbulence' )
	767	READ ( 13 ) collision_turbulence
[2232]	768	CASE ( 'tunnel_height' )
	769	READ ( 13 ) tunnel_height
	770	CASE ( 'tunnel_length' )
	771	READ ( 13 ) tunnel_length
	772	CASE ( 'tunnel_width_x' )
	773	READ ( 13 ) tunnel_width_x
	774	CASE ( 'tunnel_width_y' )
	775	READ ( 13 ) tunnel_width_y
	776	CASE ( 'tunnel_wall_depth' )
	777	READ ( 13 ) tunnel_wall_depth
[2696]	778	CASE ( 'turbulence_closure' )
	779	READ ( 13 ) turbulence_closure
[151]	780	CASE ( 'turbulent_inflow' )
	781	READ ( 13 ) turbulent_inflow
[241]	782	CASE ( 'u_bulk' )
	783	READ ( 13 ) u_bulk
[1]	784	CASE ( 'u_init' )
	785	READ ( 13 ) u_init
	786	CASE ( 'u_max' )
	787	READ ( 13 ) u_max
	788	CASE ( 'u_max_ijk' )
	789	READ ( 13 ) u_max_ijk
	790	CASE ( 'ug' )
	791	READ ( 13 ) ug
	792	CASE ( 'ug_surface' )
	793	READ ( 13 ) ug_surface
	794	CASE ( 'ug_vertical_gradient' )
	795	READ ( 13 ) ug_vertical_gradient
	796	CASE ( 'ug_vertical_gradient_level' )
	797	READ ( 13 ) ug_vertical_gradient_level
	798	CASE ( 'ug_vertical_gradient_level_ind' )
	799	READ ( 13 ) ug_vertical_gradient_level_ind
	800	CASE ( 'use_surface_fluxes' )
	801	READ ( 13 ) use_surface_fluxes
[20]	802	CASE ( 'use_top_fluxes' )
	803	READ ( 13 ) use_top_fluxes
[1]	804	CASE ( 'use_ug_for_galilei_tr' )
	805	READ ( 13 ) use_ug_for_galilei_tr
	806	CASE ( 'use_upstream_for_tke' )
	807	READ ( 13 ) use_upstream_for_tke
[241]	808	CASE ( 'v_bulk' )
	809	READ ( 13 ) v_bulk
[1]	810	CASE ( 'v_init' )
	811	READ ( 13 ) v_init
	812	CASE ( 'v_max' )
	813	READ ( 13 ) v_max
	814	CASE ( 'v_max_ijk' )
	815	READ ( 13 ) v_max_ijk
[1053]	816	CASE ( 'ventilation_effect' )
	817	READ ( 13 ) ventilation_effect
[1]	818	CASE ( 'vg' )
	819	READ ( 13 ) vg
	820	CASE ( 'vg_surface' )
	821	READ ( 13 ) vg_surface
	822	CASE ( 'vg_vertical_gradient' )
	823	READ ( 13 ) vg_vertical_gradient
	824	CASE ( 'vg_vertical_gradient_level' )
	825	READ ( 13 ) vg_vertical_gradient_level
	826	CASE ( 'vg_vertical_gradient_level_ind' )
	827	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	828	CASE ( 'virtual_flight' )
[2365]	829	READ ( 13 ) virtual_flight
	830	CASE ( 'vnest_init' )
	831	READ ( 13 ) vnest_init
[143]	832	CASE ( 'volume_flow_area' )
	833	READ ( 13 ) volume_flow_area
	834	CASE ( 'volume_flow_initial' )
	835	READ ( 13 ) volume_flow_initial
[1]	836	CASE ( 'wall_adjustment' )
	837	READ ( 13 ) wall_adjustment
[580]	838	CASE ( 'subs_vertical_gradient' )
	839	READ ( 13 ) subs_vertical_gradient
	840	CASE ( 'subs_vertical_gradient_level' )
	841	READ ( 13 ) subs_vertical_gradient_level
	842	CASE ( 'subs_vertical_gradient_level_i' )
	843	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	844	CASE ( 'wall_heatflux' )
	845	READ ( 13 ) wall_heatflux
[2232]	846	CASE ( 'wall_humidityflux' )
	847	READ ( 13 ) wall_humidityflux
	848	CASE ( 'wall_scalarflux' )
	849	READ ( 13 ) wall_scalarflux
	850	CASE ( 'wall_salinityflux' )
	851	READ ( 13 ) wall_salinityflux
[1]	852	CASE ( 'w_max' )
	853	READ ( 13 ) w_max
	854	CASE ( 'w_max_ijk' )
	855	READ ( 13 ) w_max_ijk
[2372]	856	CASE ( 'y_shift' )
	857	READ ( 13 ) y_shift
[1691]	858	CASE ( 'zeta_max' )
	859	READ ( 13 ) zeta_max
	860	CASE ( 'zeta_min' )
	861	READ ( 13 ) zeta_min
[978]	862	CASE ( 'z0h_factor' )
	863	READ ( 13 ) z0h_factor
[1]	864
	865	CASE DEFAULT
[257]	866	WRITE( message_string, * ) 'unknown variable named "', &
	867	TRIM( variable_chr ), '" found in', &
[2259]	868	' data from prior run on PE ', myid
[257]	869	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	870	END SELECT
	871	!
	872	!-- Read next string
	873	READ ( 13 ) variable_chr
	874
	875	ENDDO
[2259]	876
[1]	877
[146]	878	END SUBROUTINE read_var_list
[143]	879
[146]	880
	881
[147]	882	!------------------------------------------------------------------------------!
	883	! Description:
	884	! ------------
[1682]	885	!> Skipping the global control variables from restart-file (binary format)
	886	!> except some information needed when reading restart data from a previous
	887	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	888	!------------------------------------------------------------------------------!
[2259]	889
[1682]	890	SUBROUTINE read_parts_of_var_list
[147]	891
[1682]	892
[1320]	893	USE arrays_3d, &
[1960]	894	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	895
[147]	896	USE control_parameters
[1320]	897
	898	USE indices, &
	899	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	900
	901	USE kinds
	902
[147]	903	USE pegrid
	904
[1320]	905	USE statistics, &
	906	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	907	v_max, v_max_ijk, w_max, w_max_ijk
	908
[147]	909	IMPLICIT NONE
	910
	911	CHARACTER (LEN=10) :: version_on_file
[1521]	912	CHARACTER (LEN=20) :: momentum_advec_check
	913	CHARACTER (LEN=20) :: scalar_advec_check
[147]	914	CHARACTER (LEN=30) :: variable_chr
[626]	915	CHARACTER (LEN=1) :: cdum
[147]	916
[1320]	917	INTEGER(iwp) :: max_pr_user_on_file
	918	INTEGER(iwp) :: nz_on_file
	919	INTEGER(iwp) :: statistic_regions_on_file
	920	INTEGER(iwp) :: tmp_mpru
	921	INTEGER(iwp) :: tmp_sr
[147]	922
[1320]	923	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	924	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	925
	926
	927	CALL check_open( 13 )
	928
	929	READ ( 13 ) version_on_file
	930
[2232]	931
[147]	932	!
	933	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	934	!-- run
	935	READ ( 13 ) variable_chr
	936	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	937	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	938	'run on PE ', myid
[257]	939	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	940	ENDIF
	941	READ ( 13 ) numprocs_previous_run
	942
	943	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	944	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	945	ENDIF
	946
	947	READ ( 13 ) variable_chr
	948	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	949	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	950	'prior run on PE ', myid
	951	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	952	ENDIF
	953	READ ( 13 ) hor_index_bounds_previous_run
	954
	955	!
	956	!-- Read vertical number of gridpoints and number of different areas used
	957	!-- for computing statistics. Allocate arrays depending on these values,
	958	!-- which are needed for the following read instructions.
	959	READ ( 13 ) variable_chr
	960	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	961	message_string = 'nz not found in restart data file'
	962	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	963	ENDIF
	964	READ ( 13 ) nz_on_file
	965	IF ( nz_on_file /= nz ) THEN
[257]	966	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	967	'gridpoints along z', &
	968	'&nz on file = "', nz_on_file, '"', &
	969	'&nz from run = "', nz, '"'
[257]	970	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	971	ENDIF
	972
	973	READ ( 13 ) variable_chr
	974	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	975	message_string = 'max_pr_user not found in restart data file'
	976	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	977	ENDIF
	978	READ ( 13 ) max_pr_user_on_file
[170]	979	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	980	WRITE( message_string, * ) 'number of user profiles on res', &
	981	'tart data file differs from the current ', &
	982	'run&max_pr_user on file = "', &
	983	max_pr_user_on_file, '"', &
	984	'&max_pr_user from run = "', &
[257]	985	max_pr_user, '"'
	986	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	987	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	988	ELSE
	989	tmp_mpru = max_pr_user
[147]	990	ENDIF
	991
	992	READ ( 13 ) variable_chr
	993	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	994	message_string = 'statistic_regions not found in restart data file'
	995	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	996	ENDIF
	997	READ ( 13 ) statistic_regions_on_file
[173]	998	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	999	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	1000	'differ from the current run', &
	1001	'&statistic regions on file = "', &
	1002	statistic_regions_on_file, '"', &
	1003	'&statistic regions from run = "', &
	1004	statistic_regions, '"', &
[257]	1005	'&statistic data may be lost!'
	1006	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	1007	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	1008	ELSE
	1009	tmp_sr = statistic_regions
[147]	1010	ENDIF
	1011
	1012	!
	1013	!-- Now read and check some control parameters and skip the rest
	1014	READ ( 13 ) variable_chr
	1015
[2576]	1016	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
[147]	1017
	1018	SELECT CASE ( TRIM( variable_chr ) )
	1019
[151]	1020	CASE ( 'average_count_pr' )
	1021	READ ( 13 ) average_count_pr
[257]	1022	IF ( average_count_pr /= 0 ) THEN
[274]	1023	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	1024	'averaged. &Averaging will be done now using ', &
	1025	average_count_pr, ' samples.'
	1026	CALL message( 'read_parts_of_var_list', 'PA0309', &
	1027	0, 1, 0, 6, 0 )
[151]	1028	ENDIF
	1029
[147]	1030	CASE ( 'hom' )
	1031	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	1032	0:statistic_regions_on_file) )
	1033	READ ( 13 ) hom_on_file
[170]	1034	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1035	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	1036	DEALLOCATE( hom_on_file )
	1037
[151]	1038	CASE ( 'hom_sum' )
	1039	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	1040	0:statistic_regions_on_file) )
	1041	READ ( 13 ) hom_sum_on_file
[170]	1042	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1043	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	1044	DEALLOCATE( hom_sum_on_file )
	1045
[1521]	1046	CASE ( 'momentum_advec' )
	1047	momentum_advec_check = momentum_advec
	1048	READ ( 13 ) momentum_advec
	1049	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	1050	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	1051	'differs from momentum_advec of the initial run.'
	1052	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1053	1, 2, 0, 6, 0 )
[2259]	1054	END IF
	1055
[147]	1056	CASE ( 'nx' )
	1057	READ ( 13 ) nx_on_file
	1058
	1059	CASE ( 'ny' )
	1060	READ ( 13 ) ny_on_file
	1061
[1253]	1062	CASE ( 'ref_state' )
	1063	READ ( 13 ) ref_state
[147]	1064
[1521]	1065	CASE ( 'scalar_advec' )
	1066	scalar_advec_check = scalar_advec
	1067	READ ( 13 ) scalar_advec
	1068	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1069	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1070	'differs from scalar_advec of the initial run.'
	1071	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1072	1, 2, 0, 6, 0 )
[2259]	1073	END IF
	1074
[147]	1075	CASE DEFAULT
	1076
[626]	1077	READ ( 13 ) cdum
[147]	1078
	1079	END SELECT
	1080
	1081	READ ( 13 ) variable_chr
	1082
	1083	ENDDO
	1084
[151]	1085	!
	1086	!-- Calculate the temporal average of vertical profiles, if neccessary
	1087	IF ( average_count_pr /= 0 ) THEN
[1322]	1088	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1089	ENDIF
[147]	1090
[151]	1091
[147]	1092	END SUBROUTINE read_parts_of_var_list
	1093
	1094
	1095
[146]	1096	!------------------------------------------------------------------------------!
	1097	! Description:
	1098	! ------------
[1682]	1099	!> Skipping the global control variables from restart-file (binary format)
[146]	1100	!------------------------------------------------------------------------------!
[2259]	1101
[1682]	1102	SUBROUTINE skip_var_list
[146]	1103
[2576]	1104	USE control_parameters, &
[2776]	1105	ONLY: wind_turbine, wind_turbine_prerun, virtual_flight, &
	1106	virtual_flight_prerun, syn_turb_gen, syn_turb_gen_prerun
[2259]	1107
[2576]	1108	USE wind_turbine_model_mod, &
	1109	ONLY: wtm_skip_var_list
	1110
	1111	USE flight_mod, &
	1112	ONLY: flight_skip_var_list
	1113
	1114	USE synthetic_turbulence_generator_mod, &
	1115	ONLY: stg_skip_var_list
	1116
	1117
[147]	1118	IMPLICIT NONE
	1119
[146]	1120	CHARACTER (LEN=10) :: version_on_file
	1121	CHARACTER (LEN=30) :: variable_chr
	1122
[600]	1123	CHARACTER (LEN=1) :: cdum
[146]	1124
	1125
	1126	READ ( 13 ) version_on_file
	1127
	1128	READ ( 13 ) variable_chr
	1129
	1130	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1131
[600]	1132	READ ( 13 ) cdum
[146]	1133	READ ( 13 ) variable_chr
	1134
	1135	ENDDO
	1136
[2576]	1137	!
	1138	!-- In case of virtual flights, skip also variables related to
	1139	!-- this module.
[2776]	1140	IF ( wind_turbine_prerun ) CALL wtm_skip_var_list
[2259]	1141
[2576]	1142	!
	1143	!-- In case of virtual flights, skip also variables related to
	1144	!-- this module.
[2776]	1145	IF ( virtual_flight_prerun) CALL flight_skip_var_list
[2576]	1146
	1147	!
	1148	!-- In case of virtual flights, skip also variables related to
	1149	!-- this module.
[2776]	1150	IF ( syn_turb_gen_prerun ) CALL stg_skip_var_list
[2576]	1151
	1152
[146]	1153	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |