Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2809

Last change on this file since 2809 was 2776, checked in by Giersch, 7 years ago
Skipping of module related restart data changed + adapting synthetic turbulence generator to current restart procedure
Property svn:keywords set to `Id`
File size: 41.7 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2718]	17	! Copyright 1997-2018 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2776 2018-01-31 10:44:42Z schwenkel $
[2776]	27	! Change skip_var_list: Skipping of module related parameter is only necessary
	28	! if restart data was outputted at the end of the precursor run
	29	!
	30	! 2718 2018-01-02 08:49:38Z maronga
[2716]	31	! Corrected "Former revisions" section
	32	!
	33	! 2696 2017-12-14 17:12:51Z kanani
	34	! Change in file header (GPL part)
[2696]	35	! + rans_mode, turbulence_closure (TG)
	36	!
	37	! 2576 2017-10-24 13:49:46Z Giersch
[2576]	38	! * end * marks the end of the standard parameter list of restart files
	39	! like it was before revision 2563. To skip also the variables of the modules
	40	! wind_turbine_model_mod, flight_mod and synthetic_turbulence_generator_mod
	41	! three new functions has to be defined which are called in skip_var_list.
	42	! Adapted binary version number
	43	!
	44	! 2575 2017-10-24 09:57:58Z maronga
[2575]	45	! Renamed phi -> latitude, added longitude
	46	!
	47	! 2563 2017-10-19 15:36:10Z Giersch
[2563]	48	! CALL stg_read_restart_data moved to synthetic_turbulence_generator_mod and
	49	! CALL flight_read_restart_data moved to virtual_flights_mod. Furthermore
	50	! * end default * marks the end of the standard parameter list of restart
	51	! files and * end * marks the end of all parameter including module
	52	! parameter. Therefore the call of flight_skip_var_list becomes unnecessary.
	53	!
	54	! 2372 2017-08-25 12:37:32Z sward
[2372]	55	! y_shift added to vars, version no. increased
	56	!
	57	! 2365 2017-08-21 14:59:59Z kanani
[2365]	58	! Vertical grid nesting implemented (SadiqHuq)
	59	!
	60	! 2339 2017-08-07 13:55:26Z gronemeier
[2339]	61	! corrected timestamp in header
	62	!
	63	! 2338 2017-08-07 12:15:38Z gronemeier
[2338]	64	! Modularize 1D model
	65	!
[2339]	66	! 2320 2017-07-21 12:47:43Z suehring
[2320]	67	! Formatting adjustment
	68	!
	69	! 2265 2017-06-08 16:58:28Z schwenkel
[2265]	70	! Unused variables removed.
	71	!
	72	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	73	! Implemented synthetic turbulence generator
[2233]	74	!
[2259]	75	! 2233 2017-05-30 18:08:54Z suehring
	76	!
[2233]	77	! 2232 2017-05-30 17:47:52Z suehring
[2232]	78	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	79	! wall_salinityflux
[2259]	80	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	81	! tunnel_wall_depth
	82	!
[2043]	83	! 2042 2016-11-02 13:47:31Z suehring
	84	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	85	!
[2001]	86	! 2000 2016-08-20 18:09:15Z knoop
	87	! Forced header and separation lines into 80 columns
[2259]	88	!
[1993]	89	! 1992 2016-08-12 15:14:59Z suehring
	90	! top_scalarflux added
[2259]	91	!
[1961]	92	! 1960 2016-07-12 16:34:24Z suehring
	93	! Separate humidity and passive scalar
	94	! Remove unused variables from ONLY list
	95	!
[1958]	96	! 1957 2016-07-07 10:43:48Z suehring
	97	! flight module added
	98	!
[1851]	99	! 1849 2016-04-08 11:33:18Z hoffmann
	100	! Adapted for modularization of microphysics
	101	!
[1834]	102	! 1833 2016-04-07 14:23:03Z raasch
	103	! spectra_mod added
	104	!
[1832]	105	! 1831 2016-04-07 13:15:51Z hoffmann
	106	! turbulence renamed collision_turbulence, drizzle renamed
	107	! cloud_water_sedimentation
	108	!
[1809]	109	! 1808 2016-04-05 19:44:00Z raasch
	110	! test output removed
	111	!
[1784]	112	! 1783 2016-03-06 18:36:17Z raasch
	113	! netcdf module name changed + related changes
	114	!
[1700]	115	! 1699 2015-10-29 08:02:35Z maronga
	116	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	117	!
[1692]	118	! 1691 2015-10-26 16:17:44Z maronga
[2259]	119	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	120	! output of prandtl_layer and rif_min, rif_max.
[2259]	121	!
[1683]	122	! 1682 2015-10-07 23:56:08Z knoop
	123	! Code annotations made doxygen readable
[2259]	124	!
[1616]	125	! 1615 2015-07-08 18:49:19Z suehring
	126	! Enable turbulent inflow for passive_scalar and humidity
	127	!
[1586]	128	! 1585 2015-04-30 07:05:52Z maronga
	129	! Adapted for RRTMG
[2259]	130	!
[1561]	131	! 1560 2015-03-06 10:48:54Z keck
	132	! +recycling_yshift
[2259]	133	!
[1523]	134	! 1522 2015-01-14 10:53:12Z keck
	135	! added query for checking if the advection scheme in the restart run is the
	136	! same as the advection scheme in the corresponding initial run
[2259]	137	!
[1503]	138	! 1502 2014-12-03 18:22:31Z kanani
[2259]	139	! Canopy module and parameters removed (parameters are always read from
[1503]	140	! canopy_par NAMELIST for initial and restart runs)
[2259]	141	!
[1497]	142	! 1496 2014-12-02 17:25:50Z maronga
	143	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	144	!
[1485]	145	! 1484 2014-10-21 10:53:05Z kanani
[1484]	146	! Changes in the course of the canopy-model modularization:
	147	! parameters alpha_lad, beta_lad, lai_beta added,
	148	! module plant_canopy_model_mod added,
	149	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	150	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	151	!
[1323]	152	! 1322 2014-03-20 16:38:49Z raasch
	153	! REAL functions provided with KIND-attribute
	154	!
[1321]	155	! 1320 2014-03-20 08:40:49Z raasch
[1320]	156	! ONLY-attribute added to USE-statements,
	157	! kind-parameters added to all INTEGER and REAL declaration statements,
	158	! kinds are defined in new module kinds,
	159	! old module precision_kind is removed,
	160	! revision history before 2012 removed,
	161	! comment fields (!:) to be used for variable explanations added to
	162	! all variable declaration statements
[1054]	163	!
[1309]	164	! 1308 2014-03-13 14:58:42Z fricke
	165	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	166	! +do3d_time_count
	167	!
[1254]	168	! 1253 2013-11-07 10:48:12Z fricke
[2259]	169	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	170	! is zero for initializing_actions = 'cyclic_fill'
	171	!
[1242]	172	! 1241 2013-10-30 11:36:58Z heinze
	173	! +nudging
	174	! +large_scale_forcing
	175	!
[1196]	176	! 1195 2013-07-01 12:27:57Z heinze
	177	! Bugfix: allocate ref_state
	178	!
[1182]	179	! 1179 2013-06-14 05:57:58Z raasch
	180	! +ref_state
	181	!
[1116]	182	! 1115 2013-03-26 18:16:16Z hoffmann
	183	! unused variables removed
	184	!
[1093]	185	! 1092 2013-02-02 11:24:22Z raasch
	186	! unused variables removed
	187	!
[1066]	188	! 1065 2012-11-22 17:42:36Z hoffmann
	189	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	190	! -mu_constant, mu_constant_value
	191	!
[1054]	192	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	193	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	194	! of the two-moment cloud physics scheme:
	195	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	196	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	197	! +surface_waterflux_*
[601]	198	!
[2259]	199	! in addition, steering parameters parameters of the two-moment cloud physics
	200	! scheme:
[1053]	201	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	202	!
[1037]	203	! 1036 2012-10-22 13:43:42Z raasch
	204	! code put under GPL (PALM 3.9)
	205	!
[1017]	206	! 1015 2012-09-27 09:23:24Z raasch
	207	! -adjust_mixing_length
	208	!
[1004]	209	! 1003 2012-09-14 14:35:53Z raasch
	210	! -grid_matching
	211	!
[1002]	212	! 1001 2012-09-13 14:08:46Z raasch
	213	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	214	! overshoot_limit_, ups_limit_
	215	!
[979]	216	! 978 2012-08-09 08:28:32Z fricke
	217	! -km_damp_max, outflow_damping_width
	218	! +pt_damping_factor, pt_damping_width
	219	! +z0h_factor
	220	!
[941]	221	! 940 2012-07-09 14:31:00Z raasch
	222	! +neutral
	223	!
[928]	224	! 927 2012-06-06 19:15:04Z raasch
	225	! +masking_method
	226	!
[850]	227	! 849 2012-03-15 10:35:09Z raasch
	228	! first_call_advec_particles renamed first_call_lpm
	229	!
[826]	230	! 824 2012-02-17 09:09:57Z raasch
	231	! +curvature_solution_effects
	232	!
[1]	233	! Revision 1.1 1998/03/18 20:18:48 raasch
	234	! Initial revision
	235	!
	236	!
	237	! Description:
	238	! ------------
[1682]	239	!> Reading values of global control variables from restart-file (binary format)
[1]	240	!------------------------------------------------------------------------------!
[1682]	241	SUBROUTINE read_var_list
[1]	242
[2259]	243
[1320]	244	USE arrays_3d, &
[1484]	245	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	246	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	247
[87]	248	USE control_parameters
[1320]	249
	250	USE grid_variables, &
	251	ONLY: dx, dy
	252
	253	USE indices, &
	254	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	255
[1849]	256	USE microphysics_mod, &
	257	ONLY: c_sedimentation, collision_turbulence, &
	258	cloud_water_sedimentation, limiter_sedimentation, &
	259	nc_const, ventilation_effect
	260
[2338]	261	USE model_1d_mod, &
[1320]	262	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	263
[1783]	264	USE netcdf_interface, &
	265	ONLY: netcdf_precision, output_for_t0
[1320]	266
	267	USE particle_attributes, &
[2265]	268	ONLY: curvature_solution_effects
[1320]	269
[1]	270	USE pegrid
	271
[1585]	272	USE radiation_model_mod, &
[1833]	273	ONLY: time_radiation
[1585]	274
[1833]	275	USE spectra_mod, &
	276	ONLY: average_count_sp
	277
[1320]	278	USE statistics, &
	279	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	280	v_max, v_max_ijk, w_max, w_max_ijk
	281
[2365]	282	USE vertical_nesting_mod, &
	283	ONLY: vnest_init
	284
[1]	285	IMPLICIT NONE
	286
	287	CHARACTER (LEN=10) :: binary_version, version_on_file
	288	CHARACTER (LEN=30) :: variable_chr
[87]	289
[143]	290
[1]	291	CALL check_open( 13 )
	292
	293	!
	294	!-- Make version number check first
	295	READ ( 13 ) version_on_file
[2696]	296	binary_version = '4.5'
[1]	297	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	298	WRITE( message_string, * ) 'version mismatch concerning control ', &
	299	'variables', &
	300	'&version on file = "', &
	301	TRIM( version_on_file ), '"', &
	302	'&version on program = "', &
	303	TRIM( binary_version ), '"'
	304	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	305	ENDIF
	306
	307	!
[145]	308	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	309	!-- run
	310	READ ( 13 ) variable_chr
	311	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	312	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	313	'run on PE ', myid
[257]	314	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	315	ENDIF
	316	READ ( 13 ) numprocs_previous_run
	317
[146]	318	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	319	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	320	ENDIF
[145]	321
	322	READ ( 13 ) variable_chr
	323	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	324	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	325	'prior run on PE ', myid
	326	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	327	ENDIF
	328	READ ( 13 ) hor_index_bounds_previous_run
	329
	330	!
[1]	331	!-- Read vertical number of gridpoints and number of different areas used
	332	!-- for computing statistics. Allocate arrays depending on these values,
	333	!-- which are needed for the following read instructions.
	334	READ ( 13 ) variable_chr
	335	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	336	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	337	myid
	338	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	339	ENDIF
	340	READ ( 13 ) nz
[87]	341
[1]	342	READ ( 13 ) variable_chr
[87]	343	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	344	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	345	'prior run on PE ', myid
[257]	346	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	347	ENDIF
[159]	348	READ ( 13 ) max_pr_user ! This value is checked against the number of
	349	! user profiles given for the current run
	350	! in routine user_parin (it has to match)
[87]	351
	352	READ ( 13 ) variable_chr
[1]	353	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	354	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	355	'prior run on PE ', myid
[257]	356	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	357	ENDIF
	358	READ ( 13 ) statistic_regions
[146]	359	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	360	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	361	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	362	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	363	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	364	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	365	ENDIF
[1]	366
	367	!
	368	!-- Now read all control parameters:
	369	!-- Caution: When the following read instructions have been changed, the
	370	!-- ------- version number stored in the variable binary_version has to be
	371	!-- increased. The same changes must also be done in write_var_list.
	372	READ ( 13 ) variable_chr
[2576]	373	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
[1]	374
	375	SELECT CASE ( TRIM( variable_chr ) )
	376
	377	CASE ( 'advected_distance_x' )
	378	READ ( 13 ) advected_distance_x
	379	CASE ( 'advected_distance_y' )
	380	READ ( 13 ) advected_distance_y
	381	CASE ( 'alpha_surface' )
	382	READ ( 13 ) alpha_surface
	383	CASE ( 'average_count_pr' )
	384	READ ( 13 ) average_count_pr
	385	CASE ( 'average_count_sp' )
	386	READ ( 13 ) average_count_sp
	387	CASE ( 'average_count_3d' )
	388	READ ( 13 ) average_count_3d
	389	CASE ( 'bc_e_b' )
	390	READ ( 13 ) bc_e_b
	391	CASE ( 'bc_lr' )
	392	READ ( 13 ) bc_lr
	393	CASE ( 'bc_ns' )
	394	READ ( 13 ) bc_ns
	395	CASE ( 'bc_p_b' )
	396	READ ( 13 ) bc_p_b
	397	CASE ( 'bc_p_t' )
	398	READ ( 13 ) bc_p_t
	399	CASE ( 'bc_pt_b' )
	400	READ ( 13 ) bc_pt_b
	401	CASE ( 'bc_pt_t' )
	402	READ ( 13 ) bc_pt_t
	403	CASE ( 'bc_pt_t_val' )
	404	READ ( 13 ) bc_pt_t_val
	405	CASE ( 'bc_q_b' )
	406	READ ( 13 ) bc_q_b
	407	CASE ( 'bc_q_t' )
	408	READ ( 13 ) bc_q_t
	409	CASE ( 'bc_q_t_val' )
	410	READ ( 13 ) bc_q_t_val
	411	CASE ( 'bc_s_b' )
	412	READ ( 13 ) bc_s_b
	413	CASE ( 'bc_s_t' )
	414	READ ( 13 ) bc_s_t
[95]	415	CASE ( 'bc_sa_t' )
	416	READ ( 13 ) bc_sa_t
[1]	417	CASE ( 'bc_uv_b' )
	418	READ ( 13 ) bc_uv_b
	419	CASE ( 'bc_uv_t' )
	420	READ ( 13 ) bc_uv_t
[95]	421	CASE ( 'bottom_salinityflux' )
	422	READ ( 13 ) bottom_salinityflux
[1]	423	CASE ( 'building_height' )
	424	READ ( 13 ) building_height
	425	CASE ( 'building_length_x' )
	426	READ ( 13 ) building_length_x
	427	CASE ( 'building_length_y' )
	428	READ ( 13 ) building_length_y
	429	CASE ( 'building_wall_left' )
	430	READ ( 13 ) building_wall_left
	431	CASE ( 'building_wall_south' )
	432	READ ( 13 ) building_wall_south
[600]	433	CASE ( 'call_psolver_at_all_substeps' )
	434	READ ( 13 ) call_psolver_at_all_substeps
[240]	435	CASE ( 'canyon_height' )
	436	READ ( 13 ) canyon_height
	437	CASE ( 'canyon_width_x' )
	438	READ ( 13 ) canyon_width_x
	439	CASE ( 'canyon_width_y' )
	440	READ ( 13 ) canyon_width_y
	441	CASE ( 'canyon_wall_left' )
	442	READ ( 13 ) canyon_wall_left
	443	CASE ( 'canyon_wall_south' )
	444	READ ( 13 ) canyon_wall_south
[1065]	445	CASE ( 'c_sedimentation' )
	446	READ ( 13 ) c_sedimentation
[600]	447	CASE ( 'cfl_factor' )
	448	READ ( 13 ) cfl_factor
[1]	449	CASE ( 'cloud_droplets' )
	450	READ ( 13 ) cloud_droplets
	451	CASE ( 'cloud_physics' )
	452	READ ( 13 ) cloud_physics
[1053]	453	CASE ( 'cloud_scheme' )
	454	READ ( 13 ) cloud_scheme
[622]	455	CASE ( 'collective_wait' )
	456	READ ( 13 ) collective_wait
[1]	457	CASE ( 'conserve_volume_flow' )
	458	READ ( 13 ) conserve_volume_flow
[241]	459	CASE ( 'conserve_volume_flow_mode' )
	460	READ ( 13 ) conserve_volume_flow_mode
[1691]	461	CASE ( 'constant_flux_layer' )
	462	READ ( 13 ) constant_flux_layer
[291]	463	CASE ( 'coupling_start_time' )
	464	READ ( 13 ) coupling_start_time
[1]	465	CASE ( 'current_timestep_number' )
	466	READ ( 13 ) current_timestep_number
[824]	467	CASE ( 'curvature_solution_effects' )
	468	READ ( 13 ) curvature_solution_effects
[600]	469	CASE ( 'cycle_mg' )
	470	READ ( 13 ) cycle_mg
[1]	471	CASE ( 'damp_level_1d' )
	472	READ ( 13 ) damp_level_1d
	473	CASE ( 'dissipation_1d' )
	474	READ ( 13 ) dissipation_1d
[1308]	475	CASE ( 'do2d_xy_time_count' )
	476	READ ( 13 ) do2d_xy_time_count
	477	CASE ( 'do2d_xz_time_count' )
	478	READ ( 13 ) do2d_xz_time_count
	479	CASE ( 'do2d_yz_time_count' )
	480	READ ( 13 ) do2d_yz_time_count
	481	CASE ( 'do3d_time_count' )
	482	READ ( 13 ) do3d_time_count
[240]	483	CASE ( 'dp_external' )
	484	READ ( 13 ) dp_external
	485	CASE ( 'dp_level_b' )
	486	READ ( 13 ) dp_level_b
	487	CASE ( 'dp_smooth' )
	488	READ ( 13 ) dp_smooth
	489	CASE ( 'dpdxy' )
	490	READ ( 13 ) dpdxy
[1831]	491	CASE ( 'cloud_water_sedimentation' )
	492	READ ( 13 ) cloud_water_sedimentation
[1]	493	CASE ( 'dt_pr_1d' )
	494	READ ( 13 ) dt_pr_1d
	495	CASE ( 'dt_run_control_1d' )
	496	READ ( 13 ) dt_run_control_1d
	497	CASE ( 'dt_3d' )
	498	READ ( 13 ) dt_3d
	499	CASE ( 'dvrp_filecount' )
	500	READ ( 13 ) dvrp_filecount
	501	CASE ( 'dx' )
	502	READ ( 13 ) dx
	503	CASE ( 'dy' )
	504	READ ( 13 ) dy
	505	CASE ( 'dz' )
	506	READ ( 13 ) dz
	507	CASE ( 'dz_max' )
	508	READ ( 13 ) dz_max
	509	CASE ( 'dz_stretch_factor' )
	510	READ ( 13 ) dz_stretch_factor
	511	CASE ( 'dz_stretch_level' )
	512	READ ( 13 ) dz_stretch_level
	513	CASE ( 'e_min' )
	514	READ ( 13 ) e_min
	515	CASE ( 'end_time_1d' )
	516	READ ( 13 ) end_time_1d
	517	CASE ( 'fft_method' )
	518	READ ( 13 ) fft_method
[849]	519	CASE ( 'first_call_lpm' )
	520	READ ( 13 ) first_call_lpm
[1]	521	CASE ( 'galilei_transformation' )
	522	READ ( 13 ) galilei_transformation
	523	CASE ( 'hom' )
	524	READ ( 13 ) hom
[143]	525	CASE ( 'hom_sum' )
	526	READ ( 13 ) hom_sum
[151]	527	CASE ( 'humidity' )
	528	READ ( 13 ) humidity
	529	CASE ( 'inflow_damping_factor' )
	530	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	531	ALLOCATE( inflow_damping_factor(0:nz+1) )
	532	ENDIF
	533	READ ( 13 ) inflow_damping_factor
	534	CASE ( 'inflow_damping_height' )
	535	READ ( 13 ) inflow_damping_height
	536	CASE ( 'inflow_damping_width' )
	537	READ ( 13 ) inflow_damping_width
[1]	538	CASE ( 'inflow_disturbance_begin' )
	539	READ ( 13 ) inflow_disturbance_begin
	540	CASE ( 'inflow_disturbance_end' )
	541	READ ( 13 ) inflow_disturbance_end
	542	CASE ( 'km_constant' )
	543	READ ( 13 ) km_constant
[1241]	544	CASE ( 'large_scale_forcing' )
	545	READ ( 13 ) large_scale_forcing
[2320]	546	CASE ( 'large_scale_subsidence' )
[411]	547	READ ( 13 ) large_scale_subsidence
[1065]	548	CASE ( 'limiter_sedimentation' )
	549	READ ( 13 ) limiter_sedimentation
[63]	550	CASE ( 'loop_optimization' )
	551	READ ( 13 ) loop_optimization
[927]	552	CASE ( 'masking_method' )
	553	READ ( 13 ) masking_method
[151]	554	CASE ( 'mean_inflow_profiles' )
	555	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	556	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	557	ENDIF
	558	READ ( 13 ) mean_inflow_profiles
[600]	559	CASE ( 'mg_cycles' )
	560	READ ( 13 ) mg_cycles
	561	CASE ( 'mg_switch_to_pe0_level' )
	562	READ ( 13 ) mg_switch_to_pe0_level
[1]	563	CASE ( 'mixing_length_1d' )
	564	READ ( 13 ) mixing_length_1d
	565	CASE ( 'momentum_advec' )
	566	READ ( 13 ) momentum_advec
[1691]	567	CASE ( 'most_method' )
	568	READ ( 13 ) most_method
[1115]	569	CASE ( 'nc_const' )
	570	READ ( 13 ) nc_const
[1]	571	CASE ( 'netcdf_precision' )
	572	READ ( 13 ) netcdf_precision
[940]	573	CASE ( 'neutral' )
	574	READ ( 13 ) neutral
[600]	575	CASE ( 'ngsrb' )
	576	READ ( 13 ) ngsrb
	577	CASE ( 'nsor' )
	578	READ ( 13 ) nsor
[1]	579	CASE ( 'nsor_ini' )
	580	READ ( 13 ) nsor_ini
[1241]	581	CASE ( 'nudging' )
	582	READ ( 13 ) nudging
[1957]	583	CASE ( 'num_leg' )
	584	READ ( 13 ) num_leg
[1]	585	CASE ( 'nx' )
	586	READ ( 13 ) nx
[147]	587	nx_on_file = nx
[1]	588	CASE ( 'ny' )
	589	READ ( 13 ) ny
[147]	590	ny_on_file = ny
[94]	591	CASE ( 'ocean' )
	592	READ ( 13 ) ocean
[1]	593	CASE ( 'old_dt' )
	594	READ ( 13 ) old_dt
	595	CASE ( 'omega' )
	596	READ ( 13 ) omega
[600]	597	CASE ( 'omega_sor' )
	598	READ ( 13 ) omega_sor
[345]	599	CASE ( 'output_for_t0' )
	600	READ (13) output_for_t0
[1]	601	CASE ( 'passive_scalar' )
	602	READ ( 13 ) passive_scalar
[2575]	603	CASE ( 'latitude' )
	604	READ ( 13 ) latitude
	605	CASE ( 'longitude' )
	606	READ ( 13 ) longitude
[600]	607	CASE ( 'prandtl_number' )
	608	READ ( 13 ) prandtl_number
[1]	609	CASE ( 'precipitation' )
	610	READ ( 13 ) precipitation
[600]	611	CASE ( 'psolver' )
	612	READ ( 13 ) psolver
[978]	613	CASE ( 'pt_damping_factor' )
	614	READ ( 13 ) pt_damping_factor
	615	CASE ( 'pt_damping_width' )
	616	READ ( 13 ) pt_damping_width
[1]	617	CASE ( 'pt_init' )
	618	READ ( 13 ) pt_init
[57]	619	CASE ( 'pt_reference' )
	620	READ ( 13 ) pt_reference
[1]	621	CASE ( 'pt_surface' )
	622	READ ( 13 ) pt_surface
	623	CASE ( 'pt_surface_initial_change' )
	624	READ ( 13 ) pt_surface_initial_change
	625	CASE ( 'pt_vertical_gradient' )
	626	READ ( 13 ) pt_vertical_gradient
	627	CASE ( 'pt_vertical_gradient_level' )
	628	READ ( 13 ) pt_vertical_gradient_level
	629	CASE ( 'pt_vertical_gradient_level_ind' )
	630	READ ( 13 ) pt_vertical_gradient_level_ind
	631	CASE ( 'q_init' )
	632	READ ( 13 ) q_init
	633	CASE ( 'q_surface' )
	634	READ ( 13 ) q_surface
	635	CASE ( 'q_surface_initial_change' )
	636	READ ( 13 ) q_surface_initial_change
	637	CASE ( 'q_vertical_gradient' )
	638	READ ( 13 ) q_vertical_gradient
	639	CASE ( 'q_vertical_gradient_level' )
	640	READ ( 13 ) q_vertical_gradient_level
	641	CASE ( 'q_vertical_gradient_level_ind' )
	642	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	643	CASE ( 'cloud_top_radiation' )
	644	READ ( 13 ) cloud_top_radiation
[1]	645	CASE ( 'random_generator' )
	646	READ ( 13 ) random_generator
	647	CASE ( 'random_heatflux' )
	648	READ ( 13 ) random_heatflux
[2696]	649	CASE ( 'rans_mode' )
	650	READ ( 13 ) rans_mode
[600]	651	CASE ( 'rayleigh_damping_factor' )
	652	READ ( 13 ) rayleigh_damping_factor
	653	CASE ( 'rayleigh_damping_height' )
	654	READ ( 13 ) rayleigh_damping_height
[151]	655	CASE ( 'recycling_width' )
	656	READ ( 13 ) recycling_width
[1560]	657	CASE ( 'recycling_yshift' )
	658	READ ( 13 ) recycling_yshift
[1179]	659	CASE ( 'reference_state' )
	660	READ ( 13 ) reference_state
	661	CASE ( 'ref_state' )
	662	READ ( 13 ) ref_state
[600]	663	CASE ( 'residual_limit' )
	664	READ ( 13 ) residual_limit
[1]	665	CASE ( 'roughness_length' )
	666	READ ( 13 ) roughness_length
	667	CASE ( 'runnr' )
	668	READ ( 13 ) runnr
[291]	669	CASE ( 'run_coupled' )
	670	READ ( 13 ) run_coupled
[1960]	671	CASE ( 's_init' )
	672	READ ( 13 ) s_init
	673	CASE ( 's_surface' )
	674	READ ( 13 ) s_surface
	675	CASE ( 's_surface_initial_change' )
	676	READ ( 13 ) s_surface_initial_change
	677	CASE ( 's_vertical_gradient' )
	678	READ ( 13 ) s_vertical_gradient
	679	CASE ( 's_vertical_gradient_level' )
	680	READ ( 13 ) s_vertical_gradient_level
	681	CASE ( 's_vertical_gradient_level_ind' )
[2259]	682	READ ( 13 ) s_vertical_gradient_level_ind
[94]	683	CASE ( 'sa_init' )
	684	READ ( 13 ) sa_init
	685	CASE ( 'sa_surface' )
	686	READ ( 13 ) sa_surface
	687	CASE ( 'sa_vertical_gradient' )
	688	READ ( 13 ) sa_vertical_gradient
	689	CASE ( 'sa_vertical_gradient_level' )
	690	READ ( 13 ) sa_vertical_gradient_level
[1]	691	CASE ( 'scalar_advec' )
	692	READ ( 13 ) scalar_advec
	693	CASE ( 'simulated_time' )
	694	READ ( 13 ) simulated_time
	695	CASE ( 'surface_heatflux' )
	696	READ ( 13 ) surface_heatflux
	697	CASE ( 'surface_pressure' )
	698	READ ( 13 ) surface_pressure
	699	CASE ( 'surface_scalarflux' )
[2259]	700	READ ( 13 ) surface_scalarflux
[1]	701	CASE ( 'surface_waterflux' )
[2259]	702	READ ( 13 ) surface_waterflux
[102]	703	CASE ( 'time_coupling' )
	704	READ ( 13 ) time_coupling
[1]	705	CASE ( 'time_disturb' )
	706	READ ( 13 ) time_disturb
[1502]	707	CASE ( 'time_dopr' )
[1]	708	READ ( 13 ) time_dopr
[587]	709	CASE ( 'time_domask' )
	710	READ ( 13 ) time_domask
[1]	711	CASE ( 'time_dopr_av' )
	712	READ ( 13 ) time_dopr_av
	713	CASE ( 'time_dopr_listing' )
	714	READ ( 13 ) time_dopr_listing
	715	CASE ( 'time_dopts' )
	716	READ ( 13 ) time_dopts
	717	CASE ( 'time_dosp' )
	718	READ ( 13 ) time_dosp
	719	CASE ( 'time_dots' )
	720	READ ( 13 ) time_dots
	721	CASE ( 'time_do2d_xy' )
	722	READ ( 13 ) time_do2d_xy
	723	CASE ( 'time_do2d_xz' )
	724	READ ( 13 ) time_do2d_xz
	725	CASE ( 'time_do2d_yz' )
	726	READ ( 13 ) time_do2d_yz
	727	CASE ( 'time_do3d' )
	728	READ ( 13 ) time_do3d
	729	CASE ( 'time_do_av' )
	730	READ ( 13 ) time_do_av
	731	CASE ( 'time_do_sla' )
	732	READ ( 13 ) time_do_sla
	733	CASE ( 'time_dvrp' )
	734	READ ( 13 ) time_dvrp
[1585]	735	CASE ( 'time_radiation' )
	736	READ ( 13 ) time_radiation
[1]	737	CASE ( 'time_restart' )
	738	READ ( 13 ) time_restart
	739	CASE ( 'time_run_control' )
	740	READ ( 13 ) time_run_control
[291]	741	CASE ( 'time_since_reference_point' )
	742	READ ( 13 ) time_since_reference_point
[1]	743	CASE ( 'timestep_scheme' )
	744	READ ( 13 ) timestep_scheme
	745	CASE ( 'topography' )
	746	READ ( 13 ) topography
[256]	747	CASE ( 'topography_grid_convention' )
	748	READ ( 13 ) topography_grid_convention
[19]	749	CASE ( 'top_heatflux' )
	750	READ ( 13 ) top_heatflux
[102]	751	CASE ( 'top_momentumflux_u' )
	752	READ ( 13 ) top_momentumflux_u
	753	CASE ( 'top_momentumflux_v' )
	754	READ ( 13 ) top_momentumflux_v
[94]	755	CASE ( 'top_salinityflux' )
	756	READ ( 13 ) top_salinityflux
[1992]	757	CASE ( 'top_scalarflux' )
	758	READ ( 13 ) top_scalarflux
[1]	759	CASE ( 'tsc' )
	760	READ ( 13 ) tsc
[1831]	761	CASE ( 'collision_turbulence' )
	762	READ ( 13 ) collision_turbulence
[2232]	763	CASE ( 'tunnel_height' )
	764	READ ( 13 ) tunnel_height
	765	CASE ( 'tunnel_length' )
	766	READ ( 13 ) tunnel_length
	767	CASE ( 'tunnel_width_x' )
	768	READ ( 13 ) tunnel_width_x
	769	CASE ( 'tunnel_width_y' )
	770	READ ( 13 ) tunnel_width_y
	771	CASE ( 'tunnel_wall_depth' )
	772	READ ( 13 ) tunnel_wall_depth
[2696]	773	CASE ( 'turbulence_closure' )
	774	READ ( 13 ) turbulence_closure
[151]	775	CASE ( 'turbulent_inflow' )
	776	READ ( 13 ) turbulent_inflow
[241]	777	CASE ( 'u_bulk' )
	778	READ ( 13 ) u_bulk
[1]	779	CASE ( 'u_init' )
	780	READ ( 13 ) u_init
	781	CASE ( 'u_max' )
	782	READ ( 13 ) u_max
	783	CASE ( 'u_max_ijk' )
	784	READ ( 13 ) u_max_ijk
	785	CASE ( 'ug' )
	786	READ ( 13 ) ug
	787	CASE ( 'ug_surface' )
	788	READ ( 13 ) ug_surface
	789	CASE ( 'ug_vertical_gradient' )
	790	READ ( 13 ) ug_vertical_gradient
	791	CASE ( 'ug_vertical_gradient_level' )
	792	READ ( 13 ) ug_vertical_gradient_level
	793	CASE ( 'ug_vertical_gradient_level_ind' )
	794	READ ( 13 ) ug_vertical_gradient_level_ind
	795	CASE ( 'use_surface_fluxes' )
	796	READ ( 13 ) use_surface_fluxes
[20]	797	CASE ( 'use_top_fluxes' )
	798	READ ( 13 ) use_top_fluxes
[1]	799	CASE ( 'use_ug_for_galilei_tr' )
	800	READ ( 13 ) use_ug_for_galilei_tr
	801	CASE ( 'use_upstream_for_tke' )
	802	READ ( 13 ) use_upstream_for_tke
[241]	803	CASE ( 'v_bulk' )
	804	READ ( 13 ) v_bulk
[1]	805	CASE ( 'v_init' )
	806	READ ( 13 ) v_init
	807	CASE ( 'v_max' )
	808	READ ( 13 ) v_max
	809	CASE ( 'v_max_ijk' )
	810	READ ( 13 ) v_max_ijk
[1053]	811	CASE ( 'ventilation_effect' )
	812	READ ( 13 ) ventilation_effect
[1]	813	CASE ( 'vg' )
	814	READ ( 13 ) vg
	815	CASE ( 'vg_surface' )
	816	READ ( 13 ) vg_surface
	817	CASE ( 'vg_vertical_gradient' )
	818	READ ( 13 ) vg_vertical_gradient
	819	CASE ( 'vg_vertical_gradient_level' )
	820	READ ( 13 ) vg_vertical_gradient_level
	821	CASE ( 'vg_vertical_gradient_level_ind' )
	822	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	823	CASE ( 'virtual_flight' )
[2365]	824	READ ( 13 ) virtual_flight
	825	CASE ( 'vnest_init' )
	826	READ ( 13 ) vnest_init
[143]	827	CASE ( 'volume_flow_area' )
	828	READ ( 13 ) volume_flow_area
	829	CASE ( 'volume_flow_initial' )
	830	READ ( 13 ) volume_flow_initial
[1]	831	CASE ( 'wall_adjustment' )
	832	READ ( 13 ) wall_adjustment
[580]	833	CASE ( 'subs_vertical_gradient' )
	834	READ ( 13 ) subs_vertical_gradient
	835	CASE ( 'subs_vertical_gradient_level' )
	836	READ ( 13 ) subs_vertical_gradient_level
	837	CASE ( 'subs_vertical_gradient_level_i' )
	838	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	839	CASE ( 'wall_heatflux' )
	840	READ ( 13 ) wall_heatflux
[2232]	841	CASE ( 'wall_humidityflux' )
	842	READ ( 13 ) wall_humidityflux
	843	CASE ( 'wall_scalarflux' )
	844	READ ( 13 ) wall_scalarflux
	845	CASE ( 'wall_salinityflux' )
	846	READ ( 13 ) wall_salinityflux
[1]	847	CASE ( 'w_max' )
	848	READ ( 13 ) w_max
	849	CASE ( 'w_max_ijk' )
	850	READ ( 13 ) w_max_ijk
[2372]	851	CASE ( 'y_shift' )
	852	READ ( 13 ) y_shift
[1691]	853	CASE ( 'zeta_max' )
	854	READ ( 13 ) zeta_max
	855	CASE ( 'zeta_min' )
	856	READ ( 13 ) zeta_min
[978]	857	CASE ( 'z0h_factor' )
	858	READ ( 13 ) z0h_factor
[1]	859
	860	CASE DEFAULT
[257]	861	WRITE( message_string, * ) 'unknown variable named "', &
	862	TRIM( variable_chr ), '" found in', &
[2259]	863	' data from prior run on PE ', myid
[257]	864	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	865	END SELECT
	866	!
	867	!-- Read next string
	868	READ ( 13 ) variable_chr
	869
	870	ENDDO
[2259]	871
[1]	872
[146]	873	END SUBROUTINE read_var_list
[143]	874
[146]	875
	876
[147]	877	!------------------------------------------------------------------------------!
	878	! Description:
	879	! ------------
[1682]	880	!> Skipping the global control variables from restart-file (binary format)
	881	!> except some information needed when reading restart data from a previous
	882	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	883	!------------------------------------------------------------------------------!
[2259]	884
[1682]	885	SUBROUTINE read_parts_of_var_list
[147]	886
[1682]	887
[1320]	888	USE arrays_3d, &
[1960]	889	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	890
[147]	891	USE control_parameters
[1320]	892
	893	USE indices, &
	894	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	895
	896	USE kinds
	897
[147]	898	USE pegrid
	899
[1320]	900	USE statistics, &
	901	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	902	v_max, v_max_ijk, w_max, w_max_ijk
	903
[147]	904	IMPLICIT NONE
	905
	906	CHARACTER (LEN=10) :: version_on_file
[1521]	907	CHARACTER (LEN=20) :: momentum_advec_check
	908	CHARACTER (LEN=20) :: scalar_advec_check
[147]	909	CHARACTER (LEN=30) :: variable_chr
[626]	910	CHARACTER (LEN=1) :: cdum
[147]	911
[1320]	912	INTEGER(iwp) :: max_pr_user_on_file
	913	INTEGER(iwp) :: nz_on_file
	914	INTEGER(iwp) :: statistic_regions_on_file
	915	INTEGER(iwp) :: tmp_mpru
	916	INTEGER(iwp) :: tmp_sr
[147]	917
[1320]	918	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	919	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	920
	921
	922	CALL check_open( 13 )
	923
	924	READ ( 13 ) version_on_file
	925
[2232]	926
[147]	927	!
	928	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	929	!-- run
	930	READ ( 13 ) variable_chr
	931	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	932	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	933	'run on PE ', myid
[257]	934	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	935	ENDIF
	936	READ ( 13 ) numprocs_previous_run
	937
	938	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	939	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	940	ENDIF
	941
	942	READ ( 13 ) variable_chr
	943	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	944	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	945	'prior run on PE ', myid
	946	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	947	ENDIF
	948	READ ( 13 ) hor_index_bounds_previous_run
	949
	950	!
	951	!-- Read vertical number of gridpoints and number of different areas used
	952	!-- for computing statistics. Allocate arrays depending on these values,
	953	!-- which are needed for the following read instructions.
	954	READ ( 13 ) variable_chr
	955	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	956	message_string = 'nz not found in restart data file'
	957	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	958	ENDIF
	959	READ ( 13 ) nz_on_file
	960	IF ( nz_on_file /= nz ) THEN
[257]	961	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	962	'gridpoints along z', &
	963	'&nz on file = "', nz_on_file, '"', &
	964	'&nz from run = "', nz, '"'
[257]	965	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	966	ENDIF
	967
	968	READ ( 13 ) variable_chr
	969	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	970	message_string = 'max_pr_user not found in restart data file'
	971	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	972	ENDIF
	973	READ ( 13 ) max_pr_user_on_file
[170]	974	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	975	WRITE( message_string, * ) 'number of user profiles on res', &
	976	'tart data file differs from the current ', &
	977	'run&max_pr_user on file = "', &
	978	max_pr_user_on_file, '"', &
	979	'&max_pr_user from run = "', &
[257]	980	max_pr_user, '"'
	981	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	982	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	983	ELSE
	984	tmp_mpru = max_pr_user
[147]	985	ENDIF
	986
	987	READ ( 13 ) variable_chr
	988	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	989	message_string = 'statistic_regions not found in restart data file'
	990	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	991	ENDIF
	992	READ ( 13 ) statistic_regions_on_file
[173]	993	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	994	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	995	'differ from the current run', &
	996	'&statistic regions on file = "', &
	997	statistic_regions_on_file, '"', &
	998	'&statistic regions from run = "', &
	999	statistic_regions, '"', &
[257]	1000	'&statistic data may be lost!'
	1001	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	1002	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	1003	ELSE
	1004	tmp_sr = statistic_regions
[147]	1005	ENDIF
	1006
	1007	!
	1008	!-- Now read and check some control parameters and skip the rest
	1009	READ ( 13 ) variable_chr
	1010
[2576]	1011	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
[147]	1012
	1013	SELECT CASE ( TRIM( variable_chr ) )
	1014
[151]	1015	CASE ( 'average_count_pr' )
	1016	READ ( 13 ) average_count_pr
[257]	1017	IF ( average_count_pr /= 0 ) THEN
[274]	1018	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	1019	'averaged. &Averaging will be done now using ', &
	1020	average_count_pr, ' samples.'
	1021	CALL message( 'read_parts_of_var_list', 'PA0309', &
	1022	0, 1, 0, 6, 0 )
[151]	1023	ENDIF
	1024
[147]	1025	CASE ( 'hom' )
	1026	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	1027	0:statistic_regions_on_file) )
	1028	READ ( 13 ) hom_on_file
[170]	1029	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1030	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	1031	DEALLOCATE( hom_on_file )
	1032
[151]	1033	CASE ( 'hom_sum' )
	1034	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	1035	0:statistic_regions_on_file) )
	1036	READ ( 13 ) hom_sum_on_file
[170]	1037	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	1038	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	1039	DEALLOCATE( hom_sum_on_file )
	1040
[1521]	1041	CASE ( 'momentum_advec' )
	1042	momentum_advec_check = momentum_advec
	1043	READ ( 13 ) momentum_advec
	1044	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	1045	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	1046	'differs from momentum_advec of the initial run.'
	1047	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1048	1, 2, 0, 6, 0 )
[2259]	1049	END IF
	1050
[147]	1051	CASE ( 'nx' )
	1052	READ ( 13 ) nx_on_file
	1053
	1054	CASE ( 'ny' )
	1055	READ ( 13 ) ny_on_file
	1056
[1253]	1057	CASE ( 'ref_state' )
	1058	READ ( 13 ) ref_state
[147]	1059
[1521]	1060	CASE ( 'scalar_advec' )
	1061	scalar_advec_check = scalar_advec
	1062	READ ( 13 ) scalar_advec
	1063	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1064	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1065	'differs from scalar_advec of the initial run.'
	1066	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1067	1, 2, 0, 6, 0 )
[2259]	1068	END IF
	1069
[147]	1070	CASE DEFAULT
	1071
[626]	1072	READ ( 13 ) cdum
[147]	1073
	1074	END SELECT
	1075
	1076	READ ( 13 ) variable_chr
	1077
	1078	ENDDO
	1079
[151]	1080	!
	1081	!-- Calculate the temporal average of vertical profiles, if neccessary
	1082	IF ( average_count_pr /= 0 ) THEN
[1322]	1083	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1084	ENDIF
[147]	1085
[151]	1086
[147]	1087	END SUBROUTINE read_parts_of_var_list
	1088
	1089
	1090
[146]	1091	!------------------------------------------------------------------------------!
	1092	! Description:
	1093	! ------------
[1682]	1094	!> Skipping the global control variables from restart-file (binary format)
[146]	1095	!------------------------------------------------------------------------------!
[2259]	1096
[1682]	1097	SUBROUTINE skip_var_list
[146]	1098
[2576]	1099	USE control_parameters, &
[2776]	1100	ONLY: wind_turbine, wind_turbine_prerun, virtual_flight, &
	1101	virtual_flight_prerun, syn_turb_gen, syn_turb_gen_prerun
[2259]	1102
[2576]	1103	USE wind_turbine_model_mod, &
	1104	ONLY: wtm_skip_var_list
	1105
	1106	USE flight_mod, &
	1107	ONLY: flight_skip_var_list
	1108
	1109	USE synthetic_turbulence_generator_mod, &
	1110	ONLY: stg_skip_var_list
	1111
	1112
[147]	1113	IMPLICIT NONE
	1114
[146]	1115	CHARACTER (LEN=10) :: version_on_file
	1116	CHARACTER (LEN=30) :: variable_chr
	1117
[600]	1118	CHARACTER (LEN=1) :: cdum
[146]	1119
	1120
	1121	READ ( 13 ) version_on_file
	1122
	1123	READ ( 13 ) variable_chr
	1124
	1125	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1126
[600]	1127	READ ( 13 ) cdum
[146]	1128	READ ( 13 ) variable_chr
	1129
	1130	ENDDO
	1131
[2576]	1132	!
	1133	!-- In case of virtual flights, skip also variables related to
	1134	!-- this module.
[2776]	1135	IF ( wind_turbine_prerun ) CALL wtm_skip_var_list
[2259]	1136
[2576]	1137	!
	1138	!-- In case of virtual flights, skip also variables related to
	1139	!-- this module.
[2776]	1140	IF ( virtual_flight_prerun) CALL flight_skip_var_list
[2576]	1141
	1142	!
	1143	!-- In case of virtual flights, skip also variables related to
	1144	!-- this module.
[2776]	1145	IF ( syn_turb_gen_prerun ) CALL stg_skip_var_list
[2576]	1146
	1147
[146]	1148	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |