Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2338

Last change on this file since 2338 was 2338, checked in by gronemeier, 7 years ago
modularized 1d model
Property svn:keywords set to `Id`
File size: 39.4 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2101]	17	! Copyright 1997-2017 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2338 2017-08-07 12:15:38Z gronemeier $
[2338]	27	! Modularize 1D model
	28	!
	29	!
[2320]	30	! Formatting adjustment
	31	!
	32	! 2265 2017-06-08 16:58:28Z schwenkel
[2265]	33	! Unused variables removed.
	34	!
	35	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	36	! Implemented synthetic turbulence generator
[2233]	37	!
[2259]	38	! 2233 2017-05-30 18:08:54Z suehring
	39	!
[2233]	40	! 2232 2017-05-30 17:47:52Z suehring
[2232]	41	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	42	! wall_salinityflux
[2259]	43	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	44	! tunnel_wall_depth
	45	!
[2043]	46	! 2042 2016-11-02 13:47:31Z suehring
	47	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	48	!
[2001]	49	! 2000 2016-08-20 18:09:15Z knoop
	50	! Forced header and separation lines into 80 columns
[2259]	51	!
[1993]	52	! 1992 2016-08-12 15:14:59Z suehring
	53	! top_scalarflux added
[2259]	54	!
[1961]	55	! 1960 2016-07-12 16:34:24Z suehring
	56	! Separate humidity and passive scalar
	57	! Remove unused variables from ONLY list
	58	!
[1958]	59	! 1957 2016-07-07 10:43:48Z suehring
	60	! flight module added
	61	!
[1851]	62	! 1849 2016-04-08 11:33:18Z hoffmann
	63	! Adapted for modularization of microphysics
	64	!
[1834]	65	! 1833 2016-04-07 14:23:03Z raasch
	66	! spectra_mod added
	67	!
[1832]	68	! 1831 2016-04-07 13:15:51Z hoffmann
	69	! turbulence renamed collision_turbulence, drizzle renamed
	70	! cloud_water_sedimentation
	71	!
[1809]	72	! 1808 2016-04-05 19:44:00Z raasch
	73	! test output removed
	74	!
[1784]	75	! 1783 2016-03-06 18:36:17Z raasch
	76	! netcdf module name changed + related changes
	77	!
[1700]	78	! 1699 2015-10-29 08:02:35Z maronga
	79	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	80	!
[1692]	81	! 1691 2015-10-26 16:17:44Z maronga
[2259]	82	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	83	! output of prandtl_layer and rif_min, rif_max.
[2259]	84	!
[1683]	85	! 1682 2015-10-07 23:56:08Z knoop
	86	! Code annotations made doxygen readable
[2259]	87	!
[1616]	88	! 1615 2015-07-08 18:49:19Z suehring
	89	! Enable turbulent inflow for passive_scalar and humidity
	90	!
[1586]	91	! 1585 2015-04-30 07:05:52Z maronga
	92	! Adapted for RRTMG
[2259]	93	!
[1561]	94	! 1560 2015-03-06 10:48:54Z keck
	95	! +recycling_yshift
[2259]	96	!
[1523]	97	! 1522 2015-01-14 10:53:12Z keck
	98	! added query for checking if the advection scheme in the restart run is the
	99	! same as the advection scheme in the corresponding initial run
[2259]	100	!
[1503]	101	! 1502 2014-12-03 18:22:31Z kanani
[2259]	102	! Canopy module and parameters removed (parameters are always read from
[1503]	103	! canopy_par NAMELIST for initial and restart runs)
[2259]	104	!
[1497]	105	! 1496 2014-12-02 17:25:50Z maronga
	106	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	107	!
[1485]	108	! 1484 2014-10-21 10:53:05Z kanani
[1484]	109	! Changes in the course of the canopy-model modularization:
	110	! parameters alpha_lad, beta_lad, lai_beta added,
	111	! module plant_canopy_model_mod added,
	112	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	113	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	114	!
[1323]	115	! 1322 2014-03-20 16:38:49Z raasch
	116	! REAL functions provided with KIND-attribute
	117	!
[1321]	118	! 1320 2014-03-20 08:40:49Z raasch
[1320]	119	! ONLY-attribute added to USE-statements,
	120	! kind-parameters added to all INTEGER and REAL declaration statements,
	121	! kinds are defined in new module kinds,
	122	! old module precision_kind is removed,
	123	! revision history before 2012 removed,
	124	! comment fields (!:) to be used for variable explanations added to
	125	! all variable declaration statements
[1054]	126	!
[1309]	127	! 1308 2014-03-13 14:58:42Z fricke
	128	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	129	! +do3d_time_count
	130	!
[1254]	131	! 1253 2013-11-07 10:48:12Z fricke
[2259]	132	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	133	! is zero for initializing_actions = 'cyclic_fill'
	134	!
[1242]	135	! 1241 2013-10-30 11:36:58Z heinze
	136	! +nudging
	137	! +large_scale_forcing
	138	!
[1196]	139	! 1195 2013-07-01 12:27:57Z heinze
	140	! Bugfix: allocate ref_state
	141	!
[1182]	142	! 1179 2013-06-14 05:57:58Z raasch
	143	! +ref_state
	144	!
[1116]	145	! 1115 2013-03-26 18:16:16Z hoffmann
	146	! unused variables removed
	147	!
[1093]	148	! 1092 2013-02-02 11:24:22Z raasch
	149	! unused variables removed
	150	!
[1066]	151	! 1065 2012-11-22 17:42:36Z hoffmann
	152	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	153	! -mu_constant, mu_constant_value
	154	!
[1054]	155	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	156	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	157	! of the two-moment cloud physics scheme:
	158	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	159	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	160	! +surface_waterflux_*
[601]	161	!
[2259]	162	! in addition, steering parameters parameters of the two-moment cloud physics
	163	! scheme:
[1053]	164	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	165	!
[1037]	166	! 1036 2012-10-22 13:43:42Z raasch
	167	! code put under GPL (PALM 3.9)
	168	!
[1017]	169	! 1015 2012-09-27 09:23:24Z raasch
	170	! -adjust_mixing_length
	171	!
[1004]	172	! 1003 2012-09-14 14:35:53Z raasch
	173	! -grid_matching
	174	!
[1002]	175	! 1001 2012-09-13 14:08:46Z raasch
	176	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	177	! overshoot_limit_, ups_limit_
	178	!
[979]	179	! 978 2012-08-09 08:28:32Z fricke
	180	! -km_damp_max, outflow_damping_width
	181	! +pt_damping_factor, pt_damping_width
	182	! +z0h_factor
	183	!
[941]	184	! 940 2012-07-09 14:31:00Z raasch
	185	! +neutral
	186	!
[928]	187	! 927 2012-06-06 19:15:04Z raasch
	188	! +masking_method
	189	!
[850]	190	! 849 2012-03-15 10:35:09Z raasch
	191	! first_call_advec_particles renamed first_call_lpm
	192	!
[826]	193	! 824 2012-02-17 09:09:57Z raasch
	194	! +curvature_solution_effects
	195	!
[1]	196	! Revision 1.1 1998/03/18 20:18:48 raasch
	197	! Initial revision
	198	!
	199	!
	200	! Description:
	201	! ------------
[1682]	202	!> Reading values of global control variables from restart-file (binary format)
[1]	203	!------------------------------------------------------------------------------!
[1682]	204	SUBROUTINE read_var_list
[1]	205
[2259]	206
[1320]	207	USE arrays_3d, &
[1484]	208	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	209	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	210
[87]	211	USE control_parameters
[1320]	212
[1957]	213	USE flight_mod, &
	214	ONLY: flight_read_restart_data
[2259]	215
[1320]	216	USE grid_variables, &
	217	ONLY: dx, dy
	218
	219	USE indices, &
	220	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	221
[1849]	222	USE microphysics_mod, &
	223	ONLY: c_sedimentation, collision_turbulence, &
	224	cloud_water_sedimentation, limiter_sedimentation, &
	225	nc_const, ventilation_effect
	226
[2338]	227	USE model_1d_mod, &
[1320]	228	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	229
[1783]	230	USE netcdf_interface, &
	231	ONLY: netcdf_precision, output_for_t0
[1320]	232
	233	USE particle_attributes, &
[2265]	234	ONLY: curvature_solution_effects
[1320]	235
[1]	236	USE pegrid
	237
[1585]	238	USE radiation_model_mod, &
[1833]	239	ONLY: time_radiation
[1585]	240
[1833]	241	USE spectra_mod, &
	242	ONLY: average_count_sp
	243
[1320]	244	USE statistics, &
	245	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	246	v_max, v_max_ijk, w_max, w_max_ijk
	247
[2259]	248	USE synthetic_turbulence_generator_mod, &
	249	ONLY: stg_read_restart_data
[1691]	250
[1]	251	IMPLICIT NONE
	252
	253	CHARACTER (LEN=10) :: binary_version, version_on_file
	254	CHARACTER (LEN=30) :: variable_chr
[87]	255
[143]	256
[1]	257	CALL check_open( 13 )
	258
	259	!
	260	!-- Make version number check first
	261	READ ( 13 ) version_on_file
[1831]	262	binary_version = '4.1'
[1]	263	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	264	WRITE( message_string, * ) 'version mismatch concerning control ', &
	265	'variables', &
	266	'&version on file = "', &
	267	TRIM( version_on_file ), '"', &
	268	'&version on program = "', &
	269	TRIM( binary_version ), '"'
	270	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	271	ENDIF
	272
	273	!
[145]	274	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	275	!-- run
	276	READ ( 13 ) variable_chr
	277	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	278	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	279	'run on PE ', myid
[257]	280	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	281	ENDIF
	282	READ ( 13 ) numprocs_previous_run
	283
[146]	284	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	285	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	286	ENDIF
[145]	287
	288	READ ( 13 ) variable_chr
	289	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	290	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	291	'prior run on PE ', myid
	292	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	293	ENDIF
	294	READ ( 13 ) hor_index_bounds_previous_run
	295
	296	!
[1]	297	!-- Read vertical number of gridpoints and number of different areas used
	298	!-- for computing statistics. Allocate arrays depending on these values,
	299	!-- which are needed for the following read instructions.
	300	READ ( 13 ) variable_chr
	301	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	302	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	303	myid
	304	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	305	ENDIF
	306	READ ( 13 ) nz
[87]	307
[1]	308	READ ( 13 ) variable_chr
[87]	309	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	310	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	311	'prior run on PE ', myid
[257]	312	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	313	ENDIF
[159]	314	READ ( 13 ) max_pr_user ! This value is checked against the number of
	315	! user profiles given for the current run
	316	! in routine user_parin (it has to match)
[87]	317
	318	READ ( 13 ) variable_chr
[1]	319	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	320	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	321	'prior run on PE ', myid
[257]	322	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	323	ENDIF
	324	READ ( 13 ) statistic_regions
[146]	325	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	326	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	327	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	328	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	329	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	330	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	331	ENDIF
[1]	332
	333	!
	334	!-- Now read all control parameters:
	335	!-- Caution: When the following read instructions have been changed, the
	336	!-- ------- version number stored in the variable binary_version has to be
	337	!-- increased. The same changes must also be done in write_var_list.
	338	READ ( 13 ) variable_chr
	339	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	340
	341	SELECT CASE ( TRIM( variable_chr ) )
	342
	343	CASE ( 'advected_distance_x' )
	344	READ ( 13 ) advected_distance_x
	345	CASE ( 'advected_distance_y' )
	346	READ ( 13 ) advected_distance_y
	347	CASE ( 'alpha_surface' )
	348	READ ( 13 ) alpha_surface
	349	CASE ( 'average_count_pr' )
	350	READ ( 13 ) average_count_pr
	351	CASE ( 'average_count_sp' )
	352	READ ( 13 ) average_count_sp
	353	CASE ( 'average_count_3d' )
	354	READ ( 13 ) average_count_3d
	355	CASE ( 'bc_e_b' )
	356	READ ( 13 ) bc_e_b
	357	CASE ( 'bc_lr' )
	358	READ ( 13 ) bc_lr
	359	CASE ( 'bc_ns' )
	360	READ ( 13 ) bc_ns
	361	CASE ( 'bc_p_b' )
	362	READ ( 13 ) bc_p_b
	363	CASE ( 'bc_p_t' )
	364	READ ( 13 ) bc_p_t
	365	CASE ( 'bc_pt_b' )
	366	READ ( 13 ) bc_pt_b
	367	CASE ( 'bc_pt_t' )
	368	READ ( 13 ) bc_pt_t
	369	CASE ( 'bc_pt_t_val' )
	370	READ ( 13 ) bc_pt_t_val
	371	CASE ( 'bc_q_b' )
	372	READ ( 13 ) bc_q_b
	373	CASE ( 'bc_q_t' )
	374	READ ( 13 ) bc_q_t
	375	CASE ( 'bc_q_t_val' )
	376	READ ( 13 ) bc_q_t_val
	377	CASE ( 'bc_s_b' )
	378	READ ( 13 ) bc_s_b
	379	CASE ( 'bc_s_t' )
	380	READ ( 13 ) bc_s_t
[95]	381	CASE ( 'bc_sa_t' )
	382	READ ( 13 ) bc_sa_t
[1]	383	CASE ( 'bc_uv_b' )
	384	READ ( 13 ) bc_uv_b
	385	CASE ( 'bc_uv_t' )
	386	READ ( 13 ) bc_uv_t
[95]	387	CASE ( 'bottom_salinityflux' )
	388	READ ( 13 ) bottom_salinityflux
[1]	389	CASE ( 'building_height' )
	390	READ ( 13 ) building_height
	391	CASE ( 'building_length_x' )
	392	READ ( 13 ) building_length_x
	393	CASE ( 'building_length_y' )
	394	READ ( 13 ) building_length_y
	395	CASE ( 'building_wall_left' )
	396	READ ( 13 ) building_wall_left
	397	CASE ( 'building_wall_south' )
	398	READ ( 13 ) building_wall_south
[600]	399	CASE ( 'call_psolver_at_all_substeps' )
	400	READ ( 13 ) call_psolver_at_all_substeps
[240]	401	CASE ( 'canyon_height' )
	402	READ ( 13 ) canyon_height
	403	CASE ( 'canyon_width_x' )
	404	READ ( 13 ) canyon_width_x
	405	CASE ( 'canyon_width_y' )
	406	READ ( 13 ) canyon_width_y
	407	CASE ( 'canyon_wall_left' )
	408	READ ( 13 ) canyon_wall_left
	409	CASE ( 'canyon_wall_south' )
	410	READ ( 13 ) canyon_wall_south
[1065]	411	CASE ( 'c_sedimentation' )
	412	READ ( 13 ) c_sedimentation
[600]	413	CASE ( 'cfl_factor' )
	414	READ ( 13 ) cfl_factor
[1]	415	CASE ( 'cloud_droplets' )
	416	READ ( 13 ) cloud_droplets
	417	CASE ( 'cloud_physics' )
	418	READ ( 13 ) cloud_physics
[1053]	419	CASE ( 'cloud_scheme' )
	420	READ ( 13 ) cloud_scheme
[622]	421	CASE ( 'collective_wait' )
	422	READ ( 13 ) collective_wait
[1]	423	CASE ( 'conserve_volume_flow' )
	424	READ ( 13 ) conserve_volume_flow
[241]	425	CASE ( 'conserve_volume_flow_mode' )
	426	READ ( 13 ) conserve_volume_flow_mode
[1691]	427	CASE ( 'constant_flux_layer' )
	428	READ ( 13 ) constant_flux_layer
[291]	429	CASE ( 'coupling_start_time' )
	430	READ ( 13 ) coupling_start_time
[1]	431	CASE ( 'current_timestep_number' )
	432	READ ( 13 ) current_timestep_number
[824]	433	CASE ( 'curvature_solution_effects' )
	434	READ ( 13 ) curvature_solution_effects
[600]	435	CASE ( 'cycle_mg' )
	436	READ ( 13 ) cycle_mg
[1]	437	CASE ( 'damp_level_1d' )
	438	READ ( 13 ) damp_level_1d
	439	CASE ( 'dissipation_1d' )
	440	READ ( 13 ) dissipation_1d
[1308]	441	CASE ( 'do2d_xy_time_count' )
	442	READ ( 13 ) do2d_xy_time_count
	443	CASE ( 'do2d_xz_time_count' )
	444	READ ( 13 ) do2d_xz_time_count
	445	CASE ( 'do2d_yz_time_count' )
	446	READ ( 13 ) do2d_yz_time_count
	447	CASE ( 'do3d_time_count' )
	448	READ ( 13 ) do3d_time_count
[240]	449	CASE ( 'dp_external' )
	450	READ ( 13 ) dp_external
	451	CASE ( 'dp_level_b' )
	452	READ ( 13 ) dp_level_b
	453	CASE ( 'dp_smooth' )
	454	READ ( 13 ) dp_smooth
	455	CASE ( 'dpdxy' )
	456	READ ( 13 ) dpdxy
[1831]	457	CASE ( 'cloud_water_sedimentation' )
	458	READ ( 13 ) cloud_water_sedimentation
[1]	459	CASE ( 'dt_pr_1d' )
	460	READ ( 13 ) dt_pr_1d
	461	CASE ( 'dt_run_control_1d' )
	462	READ ( 13 ) dt_run_control_1d
	463	CASE ( 'dt_3d' )
	464	READ ( 13 ) dt_3d
	465	CASE ( 'dvrp_filecount' )
	466	READ ( 13 ) dvrp_filecount
	467	CASE ( 'dx' )
	468	READ ( 13 ) dx
	469	CASE ( 'dy' )
	470	READ ( 13 ) dy
	471	CASE ( 'dz' )
	472	READ ( 13 ) dz
	473	CASE ( 'dz_max' )
	474	READ ( 13 ) dz_max
	475	CASE ( 'dz_stretch_factor' )
	476	READ ( 13 ) dz_stretch_factor
	477	CASE ( 'dz_stretch_level' )
	478	READ ( 13 ) dz_stretch_level
	479	CASE ( 'e_min' )
	480	READ ( 13 ) e_min
	481	CASE ( 'end_time_1d' )
	482	READ ( 13 ) end_time_1d
	483	CASE ( 'fft_method' )
	484	READ ( 13 ) fft_method
[849]	485	CASE ( 'first_call_lpm' )
	486	READ ( 13 ) first_call_lpm
[1]	487	CASE ( 'galilei_transformation' )
	488	READ ( 13 ) galilei_transformation
	489	CASE ( 'hom' )
	490	READ ( 13 ) hom
[143]	491	CASE ( 'hom_sum' )
	492	READ ( 13 ) hom_sum
[151]	493	CASE ( 'humidity' )
	494	READ ( 13 ) humidity
	495	CASE ( 'inflow_damping_factor' )
	496	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	497	ALLOCATE( inflow_damping_factor(0:nz+1) )
	498	ENDIF
	499	READ ( 13 ) inflow_damping_factor
	500	CASE ( 'inflow_damping_height' )
	501	READ ( 13 ) inflow_damping_height
	502	CASE ( 'inflow_damping_width' )
	503	READ ( 13 ) inflow_damping_width
[1]	504	CASE ( 'inflow_disturbance_begin' )
	505	READ ( 13 ) inflow_disturbance_begin
	506	CASE ( 'inflow_disturbance_end' )
	507	READ ( 13 ) inflow_disturbance_end
	508	CASE ( 'km_constant' )
	509	READ ( 13 ) km_constant
[1241]	510	CASE ( 'large_scale_forcing' )
	511	READ ( 13 ) large_scale_forcing
[2320]	512	CASE ( 'large_scale_subsidence' )
[411]	513	READ ( 13 ) large_scale_subsidence
[1065]	514	CASE ( 'limiter_sedimentation' )
	515	READ ( 13 ) limiter_sedimentation
[63]	516	CASE ( 'loop_optimization' )
	517	READ ( 13 ) loop_optimization
[927]	518	CASE ( 'masking_method' )
	519	READ ( 13 ) masking_method
[151]	520	CASE ( 'mean_inflow_profiles' )
	521	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	522	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	523	ENDIF
	524	READ ( 13 ) mean_inflow_profiles
[600]	525	CASE ( 'mg_cycles' )
	526	READ ( 13 ) mg_cycles
	527	CASE ( 'mg_switch_to_pe0_level' )
	528	READ ( 13 ) mg_switch_to_pe0_level
[1]	529	CASE ( 'mixing_length_1d' )
	530	READ ( 13 ) mixing_length_1d
	531	CASE ( 'momentum_advec' )
	532	READ ( 13 ) momentum_advec
[1691]	533	CASE ( 'most_method' )
	534	READ ( 13 ) most_method
[1115]	535	CASE ( 'nc_const' )
	536	READ ( 13 ) nc_const
[1]	537	CASE ( 'netcdf_precision' )
	538	READ ( 13 ) netcdf_precision
[940]	539	CASE ( 'neutral' )
	540	READ ( 13 ) neutral
[600]	541	CASE ( 'ngsrb' )
	542	READ ( 13 ) ngsrb
	543	CASE ( 'nsor' )
	544	READ ( 13 ) nsor
[1]	545	CASE ( 'nsor_ini' )
	546	READ ( 13 ) nsor_ini
[1241]	547	CASE ( 'nudging' )
	548	READ ( 13 ) nudging
[1957]	549	CASE ( 'num_leg' )
	550	READ ( 13 ) num_leg
[1]	551	CASE ( 'nx' )
	552	READ ( 13 ) nx
[147]	553	nx_on_file = nx
[1]	554	CASE ( 'ny' )
	555	READ ( 13 ) ny
[147]	556	ny_on_file = ny
[94]	557	CASE ( 'ocean' )
	558	READ ( 13 ) ocean
[1]	559	CASE ( 'old_dt' )
	560	READ ( 13 ) old_dt
	561	CASE ( 'omega' )
	562	READ ( 13 ) omega
[600]	563	CASE ( 'omega_sor' )
	564	READ ( 13 ) omega_sor
[345]	565	CASE ( 'output_for_t0' )
	566	READ (13) output_for_t0
[1]	567	CASE ( 'passive_scalar' )
	568	READ ( 13 ) passive_scalar
	569	CASE ( 'phi' )
	570	READ ( 13 ) phi
[600]	571	CASE ( 'prandtl_number' )
	572	READ ( 13 ) prandtl_number
[1]	573	CASE ( 'precipitation' )
	574	READ ( 13 ) precipitation
[600]	575	CASE ( 'psolver' )
	576	READ ( 13 ) psolver
[978]	577	CASE ( 'pt_damping_factor' )
	578	READ ( 13 ) pt_damping_factor
	579	CASE ( 'pt_damping_width' )
	580	READ ( 13 ) pt_damping_width
[1]	581	CASE ( 'pt_init' )
	582	READ ( 13 ) pt_init
[57]	583	CASE ( 'pt_reference' )
	584	READ ( 13 ) pt_reference
[1]	585	CASE ( 'pt_surface' )
	586	READ ( 13 ) pt_surface
	587	CASE ( 'pt_surface_initial_change' )
	588	READ ( 13 ) pt_surface_initial_change
	589	CASE ( 'pt_vertical_gradient' )
	590	READ ( 13 ) pt_vertical_gradient
	591	CASE ( 'pt_vertical_gradient_level' )
	592	READ ( 13 ) pt_vertical_gradient_level
	593	CASE ( 'pt_vertical_gradient_level_ind' )
	594	READ ( 13 ) pt_vertical_gradient_level_ind
	595	CASE ( 'q_init' )
	596	READ ( 13 ) q_init
	597	CASE ( 'q_surface' )
	598	READ ( 13 ) q_surface
	599	CASE ( 'q_surface_initial_change' )
	600	READ ( 13 ) q_surface_initial_change
	601	CASE ( 'q_vertical_gradient' )
	602	READ ( 13 ) q_vertical_gradient
	603	CASE ( 'q_vertical_gradient_level' )
	604	READ ( 13 ) q_vertical_gradient_level
	605	CASE ( 'q_vertical_gradient_level_ind' )
	606	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	607	CASE ( 'cloud_top_radiation' )
	608	READ ( 13 ) cloud_top_radiation
[1]	609	CASE ( 'random_generator' )
	610	READ ( 13 ) random_generator
	611	CASE ( 'random_heatflux' )
	612	READ ( 13 ) random_heatflux
[600]	613	CASE ( 'rayleigh_damping_factor' )
	614	READ ( 13 ) rayleigh_damping_factor
	615	CASE ( 'rayleigh_damping_height' )
	616	READ ( 13 ) rayleigh_damping_height
[151]	617	CASE ( 'recycling_width' )
	618	READ ( 13 ) recycling_width
[1560]	619	CASE ( 'recycling_yshift' )
	620	READ ( 13 ) recycling_yshift
[1179]	621	CASE ( 'reference_state' )
	622	READ ( 13 ) reference_state
	623	CASE ( 'ref_state' )
	624	READ ( 13 ) ref_state
[600]	625	CASE ( 'residual_limit' )
	626	READ ( 13 ) residual_limit
[1]	627	CASE ( 'roughness_length' )
	628	READ ( 13 ) roughness_length
	629	CASE ( 'runnr' )
	630	READ ( 13 ) runnr
[291]	631	CASE ( 'run_coupled' )
	632	READ ( 13 ) run_coupled
[1960]	633	CASE ( 's_init' )
	634	READ ( 13 ) s_init
	635	CASE ( 's_surface' )
	636	READ ( 13 ) s_surface
	637	CASE ( 's_surface_initial_change' )
	638	READ ( 13 ) s_surface_initial_change
	639	CASE ( 's_vertical_gradient' )
	640	READ ( 13 ) s_vertical_gradient
	641	CASE ( 's_vertical_gradient_level' )
	642	READ ( 13 ) s_vertical_gradient_level
	643	CASE ( 's_vertical_gradient_level_ind' )
[2259]	644	READ ( 13 ) s_vertical_gradient_level_ind
[94]	645	CASE ( 'sa_init' )
	646	READ ( 13 ) sa_init
	647	CASE ( 'sa_surface' )
	648	READ ( 13 ) sa_surface
	649	CASE ( 'sa_vertical_gradient' )
	650	READ ( 13 ) sa_vertical_gradient
	651	CASE ( 'sa_vertical_gradient_level' )
	652	READ ( 13 ) sa_vertical_gradient_level
[1]	653	CASE ( 'scalar_advec' )
	654	READ ( 13 ) scalar_advec
	655	CASE ( 'simulated_time' )
	656	READ ( 13 ) simulated_time
	657	CASE ( 'surface_heatflux' )
	658	READ ( 13 ) surface_heatflux
	659	CASE ( 'surface_pressure' )
	660	READ ( 13 ) surface_pressure
	661	CASE ( 'surface_scalarflux' )
[2259]	662	READ ( 13 ) surface_scalarflux
[1]	663	CASE ( 'surface_waterflux' )
[2259]	664	READ ( 13 ) surface_waterflux
[102]	665	CASE ( 'time_coupling' )
	666	READ ( 13 ) time_coupling
[1]	667	CASE ( 'time_disturb' )
	668	READ ( 13 ) time_disturb
[1502]	669	CASE ( 'time_dopr' )
[1]	670	READ ( 13 ) time_dopr
[587]	671	CASE ( 'time_domask' )
	672	READ ( 13 ) time_domask
[1]	673	CASE ( 'time_dopr_av' )
	674	READ ( 13 ) time_dopr_av
	675	CASE ( 'time_dopr_listing' )
	676	READ ( 13 ) time_dopr_listing
	677	CASE ( 'time_dopts' )
	678	READ ( 13 ) time_dopts
	679	CASE ( 'time_dosp' )
	680	READ ( 13 ) time_dosp
	681	CASE ( 'time_dots' )
	682	READ ( 13 ) time_dots
	683	CASE ( 'time_do2d_xy' )
	684	READ ( 13 ) time_do2d_xy
	685	CASE ( 'time_do2d_xz' )
	686	READ ( 13 ) time_do2d_xz
	687	CASE ( 'time_do2d_yz' )
	688	READ ( 13 ) time_do2d_yz
	689	CASE ( 'time_do3d' )
	690	READ ( 13 ) time_do3d
	691	CASE ( 'time_do_av' )
	692	READ ( 13 ) time_do_av
	693	CASE ( 'time_do_sla' )
	694	READ ( 13 ) time_do_sla
	695	CASE ( 'time_dvrp' )
	696	READ ( 13 ) time_dvrp
[1585]	697	CASE ( 'time_radiation' )
	698	READ ( 13 ) time_radiation
[1]	699	CASE ( 'time_restart' )
	700	READ ( 13 ) time_restart
	701	CASE ( 'time_run_control' )
	702	READ ( 13 ) time_run_control
[291]	703	CASE ( 'time_since_reference_point' )
	704	READ ( 13 ) time_since_reference_point
[1]	705	CASE ( 'timestep_scheme' )
	706	READ ( 13 ) timestep_scheme
	707	CASE ( 'topography' )
	708	READ ( 13 ) topography
[256]	709	CASE ( 'topography_grid_convention' )
	710	READ ( 13 ) topography_grid_convention
[19]	711	CASE ( 'top_heatflux' )
	712	READ ( 13 ) top_heatflux
[102]	713	CASE ( 'top_momentumflux_u' )
	714	READ ( 13 ) top_momentumflux_u
	715	CASE ( 'top_momentumflux_v' )
	716	READ ( 13 ) top_momentumflux_v
[94]	717	CASE ( 'top_salinityflux' )
	718	READ ( 13 ) top_salinityflux
[1992]	719	CASE ( 'top_scalarflux' )
	720	READ ( 13 ) top_scalarflux
[1]	721	CASE ( 'tsc' )
	722	READ ( 13 ) tsc
[1831]	723	CASE ( 'collision_turbulence' )
	724	READ ( 13 ) collision_turbulence
[2232]	725	CASE ( 'tunnel_height' )
	726	READ ( 13 ) tunnel_height
	727	CASE ( 'tunnel_length' )
	728	READ ( 13 ) tunnel_length
	729	CASE ( 'tunnel_width_x' )
	730	READ ( 13 ) tunnel_width_x
	731	CASE ( 'tunnel_width_y' )
	732	READ ( 13 ) tunnel_width_y
	733	CASE ( 'tunnel_wall_depth' )
	734	READ ( 13 ) tunnel_wall_depth
[151]	735	CASE ( 'turbulent_inflow' )
	736	READ ( 13 ) turbulent_inflow
[241]	737	CASE ( 'u_bulk' )
	738	READ ( 13 ) u_bulk
[1]	739	CASE ( 'u_init' )
	740	READ ( 13 ) u_init
	741	CASE ( 'u_max' )
	742	READ ( 13 ) u_max
	743	CASE ( 'u_max_ijk' )
	744	READ ( 13 ) u_max_ijk
	745	CASE ( 'ug' )
	746	READ ( 13 ) ug
	747	CASE ( 'ug_surface' )
	748	READ ( 13 ) ug_surface
	749	CASE ( 'ug_vertical_gradient' )
	750	READ ( 13 ) ug_vertical_gradient
	751	CASE ( 'ug_vertical_gradient_level' )
	752	READ ( 13 ) ug_vertical_gradient_level
	753	CASE ( 'ug_vertical_gradient_level_ind' )
	754	READ ( 13 ) ug_vertical_gradient_level_ind
	755	CASE ( 'use_surface_fluxes' )
	756	READ ( 13 ) use_surface_fluxes
[20]	757	CASE ( 'use_top_fluxes' )
	758	READ ( 13 ) use_top_fluxes
[1]	759	CASE ( 'use_ug_for_galilei_tr' )
	760	READ ( 13 ) use_ug_for_galilei_tr
	761	CASE ( 'use_upstream_for_tke' )
	762	READ ( 13 ) use_upstream_for_tke
[241]	763	CASE ( 'v_bulk' )
	764	READ ( 13 ) v_bulk
[1]	765	CASE ( 'v_init' )
	766	READ ( 13 ) v_init
	767	CASE ( 'v_max' )
	768	READ ( 13 ) v_max
	769	CASE ( 'v_max_ijk' )
	770	READ ( 13 ) v_max_ijk
[1053]	771	CASE ( 'ventilation_effect' )
	772	READ ( 13 ) ventilation_effect
[1]	773	CASE ( 'vg' )
	774	READ ( 13 ) vg
	775	CASE ( 'vg_surface' )
	776	READ ( 13 ) vg_surface
	777	CASE ( 'vg_vertical_gradient' )
	778	READ ( 13 ) vg_vertical_gradient
	779	CASE ( 'vg_vertical_gradient_level' )
	780	READ ( 13 ) vg_vertical_gradient_level
	781	CASE ( 'vg_vertical_gradient_level_ind' )
	782	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	783	CASE ( 'virtual_flight' )
[2259]	784	READ ( 13 ) virtual_flight
[143]	785	CASE ( 'volume_flow_area' )
	786	READ ( 13 ) volume_flow_area
	787	CASE ( 'volume_flow_initial' )
	788	READ ( 13 ) volume_flow_initial
[1]	789	CASE ( 'wall_adjustment' )
	790	READ ( 13 ) wall_adjustment
[580]	791	CASE ( 'subs_vertical_gradient' )
	792	READ ( 13 ) subs_vertical_gradient
	793	CASE ( 'subs_vertical_gradient_level' )
	794	READ ( 13 ) subs_vertical_gradient_level
	795	CASE ( 'subs_vertical_gradient_level_i' )
	796	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	797	CASE ( 'wall_heatflux' )
	798	READ ( 13 ) wall_heatflux
[2232]	799	CASE ( 'wall_humidityflux' )
	800	READ ( 13 ) wall_humidityflux
	801	CASE ( 'wall_scalarflux' )
	802	READ ( 13 ) wall_scalarflux
	803	CASE ( 'wall_salinityflux' )
	804	READ ( 13 ) wall_salinityflux
[1]	805	CASE ( 'w_max' )
	806	READ ( 13 ) w_max
	807	CASE ( 'w_max_ijk' )
	808	READ ( 13 ) w_max_ijk
[1691]	809	CASE ( 'zeta_max' )
	810	READ ( 13 ) zeta_max
	811	CASE ( 'zeta_min' )
	812	READ ( 13 ) zeta_min
[978]	813	CASE ( 'z0h_factor' )
	814	READ ( 13 ) z0h_factor
[1]	815
	816	CASE DEFAULT
[257]	817	WRITE( message_string, * ) 'unknown variable named "', &
	818	TRIM( variable_chr ), '" found in', &
[2259]	819	' data from prior run on PE ', myid
[257]	820	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	821	END SELECT
	822	!
	823	!-- Read next string
	824	READ ( 13 ) variable_chr
	825
	826	ENDDO
[2259]	827
[1957]	828	IF ( virtual_flight ) CALL flight_read_restart_data
[1]	829
[2259]	830	IF ( synthetic_turbulence_generator ) CALL stg_read_restart_data
[1]	831
[146]	832	END SUBROUTINE read_var_list
[143]	833
[146]	834
	835
[147]	836	!------------------------------------------------------------------------------!
	837	! Description:
	838	! ------------
[1682]	839	!> Skipping the global control variables from restart-file (binary format)
	840	!> except some information needed when reading restart data from a previous
	841	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	842	!------------------------------------------------------------------------------!
[2259]	843
[1682]	844	SUBROUTINE read_parts_of_var_list
[147]	845
[1682]	846
[1320]	847	USE arrays_3d, &
[1960]	848	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	849
[147]	850	USE control_parameters
[1320]	851
	852	USE indices, &
	853	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	854
	855	USE kinds
	856
[147]	857	USE pegrid
	858
[1320]	859	USE statistics, &
	860	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	861	v_max, v_max_ijk, w_max, w_max_ijk
	862
[147]	863	IMPLICIT NONE
	864
	865	CHARACTER (LEN=10) :: version_on_file
[1521]	866	CHARACTER (LEN=20) :: momentum_advec_check
	867	CHARACTER (LEN=20) :: scalar_advec_check
[147]	868	CHARACTER (LEN=30) :: variable_chr
[626]	869	CHARACTER (LEN=1) :: cdum
[147]	870
[1320]	871	INTEGER(iwp) :: max_pr_user_on_file
	872	INTEGER(iwp) :: nz_on_file
	873	INTEGER(iwp) :: statistic_regions_on_file
	874	INTEGER(iwp) :: tmp_mpru
	875	INTEGER(iwp) :: tmp_sr
[147]	876
[1320]	877	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	878	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	879
	880
	881	CALL check_open( 13 )
	882
	883	READ ( 13 ) version_on_file
	884
[2232]	885
[147]	886	!
	887	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	888	!-- run
	889	READ ( 13 ) variable_chr
	890	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	891	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	892	'run on PE ', myid
[257]	893	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	894	ENDIF
	895	READ ( 13 ) numprocs_previous_run
	896
	897	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	898	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	899	ENDIF
	900
	901	READ ( 13 ) variable_chr
	902	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	903	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	904	'prior run on PE ', myid
	905	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	906	ENDIF
	907	READ ( 13 ) hor_index_bounds_previous_run
	908
	909	!
	910	!-- Read vertical number of gridpoints and number of different areas used
	911	!-- for computing statistics. Allocate arrays depending on these values,
	912	!-- which are needed for the following read instructions.
	913	READ ( 13 ) variable_chr
	914	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	915	message_string = 'nz not found in restart data file'
	916	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	917	ENDIF
	918	READ ( 13 ) nz_on_file
	919	IF ( nz_on_file /= nz ) THEN
[257]	920	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	921	'gridpoints along z', &
	922	'&nz on file = "', nz_on_file, '"', &
	923	'&nz from run = "', nz, '"'
[257]	924	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	925	ENDIF
	926
	927	READ ( 13 ) variable_chr
	928	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	929	message_string = 'max_pr_user not found in restart data file'
	930	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	931	ENDIF
	932	READ ( 13 ) max_pr_user_on_file
[170]	933	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	934	WRITE( message_string, * ) 'number of user profiles on res', &
	935	'tart data file differs from the current ', &
	936	'run&max_pr_user on file = "', &
	937	max_pr_user_on_file, '"', &
	938	'&max_pr_user from run = "', &
[257]	939	max_pr_user, '"'
	940	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	941	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	942	ELSE
	943	tmp_mpru = max_pr_user
[147]	944	ENDIF
	945
	946	READ ( 13 ) variable_chr
	947	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	948	message_string = 'statistic_regions not found in restart data file'
	949	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	950	ENDIF
	951	READ ( 13 ) statistic_regions_on_file
[173]	952	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	953	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	954	'differ from the current run', &
	955	'&statistic regions on file = "', &
	956	statistic_regions_on_file, '"', &
	957	'&statistic regions from run = "', &
	958	statistic_regions, '"', &
[257]	959	'&statistic data may be lost!'
	960	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	961	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	962	ELSE
	963	tmp_sr = statistic_regions
[147]	964	ENDIF
	965
	966	!
	967	!-- Now read and check some control parameters and skip the rest
	968	READ ( 13 ) variable_chr
	969
	970	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	971
	972	SELECT CASE ( TRIM( variable_chr ) )
	973
[151]	974	CASE ( 'average_count_pr' )
	975	READ ( 13 ) average_count_pr
[257]	976	IF ( average_count_pr /= 0 ) THEN
[274]	977	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	978	'averaged. &Averaging will be done now using ', &
	979	average_count_pr, ' samples.'
	980	CALL message( 'read_parts_of_var_list', 'PA0309', &
	981	0, 1, 0, 6, 0 )
[151]	982	ENDIF
	983
[147]	984	CASE ( 'hom' )
	985	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	986	0:statistic_regions_on_file) )
	987	READ ( 13 ) hom_on_file
[170]	988	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	989	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	990	DEALLOCATE( hom_on_file )
	991
[151]	992	CASE ( 'hom_sum' )
	993	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	994	0:statistic_regions_on_file) )
	995	READ ( 13 ) hom_sum_on_file
[170]	996	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	997	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	998	DEALLOCATE( hom_sum_on_file )
	999
[1521]	1000	CASE ( 'momentum_advec' )
	1001	momentum_advec_check = momentum_advec
	1002	READ ( 13 ) momentum_advec
	1003	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	1004	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	1005	'differs from momentum_advec of the initial run.'
	1006	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1007	1, 2, 0, 6, 0 )
[2259]	1008	END IF
	1009
[147]	1010	CASE ( 'nx' )
	1011	READ ( 13 ) nx_on_file
	1012
	1013	CASE ( 'ny' )
	1014	READ ( 13 ) ny_on_file
	1015
[1253]	1016	CASE ( 'ref_state' )
	1017	READ ( 13 ) ref_state
[147]	1018
[1521]	1019	CASE ( 'scalar_advec' )
	1020	scalar_advec_check = scalar_advec
	1021	READ ( 13 ) scalar_advec
	1022	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1023	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1024	'differs from scalar_advec of the initial run.'
	1025	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1026	1, 2, 0, 6, 0 )
[2259]	1027	END IF
	1028
[147]	1029	CASE DEFAULT
	1030
[626]	1031	READ ( 13 ) cdum
[147]	1032
	1033	END SELECT
	1034
	1035	READ ( 13 ) variable_chr
	1036
	1037	ENDDO
	1038
[151]	1039	!
	1040	!-- Calculate the temporal average of vertical profiles, if neccessary
	1041	IF ( average_count_pr /= 0 ) THEN
[1322]	1042	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1043	ENDIF
[147]	1044
[151]	1045
[147]	1046	END SUBROUTINE read_parts_of_var_list
	1047
	1048
	1049
[146]	1050	!------------------------------------------------------------------------------!
	1051	! Description:
	1052	! ------------
[1682]	1053	!> Skipping the global control variables from restart-file (binary format)
[146]	1054	!------------------------------------------------------------------------------!
[2259]	1055
[1682]	1056	SUBROUTINE skip_var_list
[146]	1057
[1957]	1058	USE control_parameters, &
	1059	ONLY: virtual_flight
[2259]	1060
[1957]	1061	USE flight_mod, &
	1062	ONLY: flight_skip_var_list
[2259]	1063
[147]	1064	IMPLICIT NONE
	1065
[146]	1066	CHARACTER (LEN=10) :: version_on_file
	1067	CHARACTER (LEN=30) :: variable_chr
	1068
[600]	1069	CHARACTER (LEN=1) :: cdum
[146]	1070
	1071
	1072	READ ( 13 ) version_on_file
	1073
	1074	READ ( 13 ) variable_chr
	1075
	1076	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1077
[600]	1078	READ ( 13 ) cdum
[146]	1079	READ ( 13 ) variable_chr
	1080
	1081	ENDDO
[1957]	1082	!
[2259]	1083	!-- In case of virtual flights, skip also variables related to
[1957]	1084	!-- this module.
	1085	IF ( virtual_flight ) CALL flight_skip_var_list
[146]	1086
[2259]	1087
[146]	1088	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |