Home

Context Navigation

source: palm/trunk/SOURCE/read_var_list.f90 @ 2265

Last change on this file since 2265 was 2265, checked in by schwenkel, 7 years ago
unused variables removed
Property svn:keywords set to `Id`
File size: 39.4 KB

Rev	Line
[1682]	1	!> @file read_var_list.f90
[2000]	2	!------------------------------------------------------------------------------!
[1036]	3	! This file is part of PALM.
	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[2101]	17	! Copyright 1997-2017 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[257]	20	! Current revisions:
[622]	21	! ------------------
[2233]	22	!
	23	!
	24	! Former revisions:
	25	! -----------------
	26	! $Id: read_var_list.f90 2265 2017-06-08 16:58:28Z schwenkel $
[2265]	27	! Unused variables removed.
	28	!
	29	! 2259 2017-06-08 09:09:11Z gronemeier
[2259]	30	! Implemented synthetic turbulence generator
[2233]	31	!
[2259]	32	! 2233 2017-05-30 18:08:54Z suehring
	33	!
[2233]	34	! 2232 2017-05-30 17:47:52Z suehring
[2232]	35	! Replace wall_qflux, wall_sflux by wall_humidityflux and wall_scalarflux; add
	36	! wall_salinityflux
[2259]	37	! +tunnel_height, tunnel_length, tunnel_width_x, tunnel_width_y,
[2232]	38	! tunnel_wall_depth
	39	!
[2043]	40	! 2042 2016-11-02 13:47:31Z suehring
	41	! Bugfix, read restart data for wall_heatflux, wall_qflux and wall_sflux
[2259]	42	!
[2001]	43	! 2000 2016-08-20 18:09:15Z knoop
	44	! Forced header and separation lines into 80 columns
[2259]	45	!
[1993]	46	! 1992 2016-08-12 15:14:59Z suehring
	47	! top_scalarflux added
[2259]	48	!
[1961]	49	! 1960 2016-07-12 16:34:24Z suehring
	50	! Separate humidity and passive scalar
	51	! Remove unused variables from ONLY list
	52	!
[1958]	53	! 1957 2016-07-07 10:43:48Z suehring
	54	! flight module added
	55	!
[1851]	56	! 1849 2016-04-08 11:33:18Z hoffmann
	57	! Adapted for modularization of microphysics
	58	!
[1834]	59	! 1833 2016-04-07 14:23:03Z raasch
	60	! spectra_mod added
	61	!
[1832]	62	! 1831 2016-04-07 13:15:51Z hoffmann
	63	! turbulence renamed collision_turbulence, drizzle renamed
	64	! cloud_water_sedimentation
	65	!
[1809]	66	! 1808 2016-04-05 19:44:00Z raasch
	67	! test output removed
	68	!
[1784]	69	! 1783 2016-03-06 18:36:17Z raasch
	70	! netcdf module name changed + related changes
	71	!
[1700]	72	! 1699 2015-10-29 08:02:35Z maronga
	73	! Bugfix: update of binary version from 3.9b to 4.0 was missing
[2259]	74	!
[1692]	75	! 1691 2015-10-26 16:17:44Z maronga
[2259]	76	! Added output of most_method, constant_flux_layer, zeta_min, zeta_max. Removed
[1692]	77	! output of prandtl_layer and rif_min, rif_max.
[2259]	78	!
[1683]	79	! 1682 2015-10-07 23:56:08Z knoop
	80	! Code annotations made doxygen readable
[2259]	81	!
[1616]	82	! 1615 2015-07-08 18:49:19Z suehring
	83	! Enable turbulent inflow for passive_scalar and humidity
	84	!
[1586]	85	! 1585 2015-04-30 07:05:52Z maronga
	86	! Adapted for RRTMG
[2259]	87	!
[1561]	88	! 1560 2015-03-06 10:48:54Z keck
	89	! +recycling_yshift
[2259]	90	!
[1523]	91	! 1522 2015-01-14 10:53:12Z keck
	92	! added query for checking if the advection scheme in the restart run is the
	93	! same as the advection scheme in the corresponding initial run
[2259]	94	!
[1503]	95	! 1502 2014-12-03 18:22:31Z kanani
[2259]	96	! Canopy module and parameters removed (parameters are always read from
[1503]	97	! canopy_par NAMELIST for initial and restart runs)
[2259]	98	!
[1497]	99	! 1496 2014-12-02 17:25:50Z maronga
	100	! Renamed "radiation" -> "cloud_top_radiation"
[2259]	101	!
[1485]	102	! 1484 2014-10-21 10:53:05Z kanani
[1484]	103	! Changes in the course of the canopy-model modularization:
	104	! parameters alpha_lad, beta_lad, lai_beta added,
	105	! module plant_canopy_model_mod added,
	106	! drag_coefficient, leaf_surface_concentration and scalar_exchange_coefficient
	107	! renamed to canopy_drag_coeff, leaf_surface_conc and leaf_scalar_exch_coeff
[1321]	108	!
[1323]	109	! 1322 2014-03-20 16:38:49Z raasch
	110	! REAL functions provided with KIND-attribute
	111	!
[1321]	112	! 1320 2014-03-20 08:40:49Z raasch
[1320]	113	! ONLY-attribute added to USE-statements,
	114	! kind-parameters added to all INTEGER and REAL declaration statements,
	115	! kinds are defined in new module kinds,
	116	! old module precision_kind is removed,
	117	! revision history before 2012 removed,
	118	! comment fields (!:) to be used for variable explanations added to
	119	! all variable declaration statements
[1054]	120	!
[1309]	121	! 1308 2014-03-13 14:58:42Z fricke
	122	! +do2d_xy_time_count, do2d_xz_time_count, do2d_yz_time_count,
	123	! +do3d_time_count
	124	!
[1254]	125	! 1253 2013-11-07 10:48:12Z fricke
[2259]	126	! Bugfix: add ref_state to read_parts_of_var_list, otherwise ref_state
[1254]	127	! is zero for initializing_actions = 'cyclic_fill'
	128	!
[1242]	129	! 1241 2013-10-30 11:36:58Z heinze
	130	! +nudging
	131	! +large_scale_forcing
	132	!
[1196]	133	! 1195 2013-07-01 12:27:57Z heinze
	134	! Bugfix: allocate ref_state
	135	!
[1182]	136	! 1179 2013-06-14 05:57:58Z raasch
	137	! +ref_state
	138	!
[1116]	139	! 1115 2013-03-26 18:16:16Z hoffmann
	140	! unused variables removed
	141	!
[1093]	142	! 1092 2013-02-02 11:24:22Z raasch
	143	! unused variables removed
	144	!
[1066]	145	! 1065 2012-11-22 17:42:36Z hoffmann
	146	! +nc, c_sedimentation, limiter_sedimentation, turbulence
	147	! -mu_constant, mu_constant_value
	148	!
[1054]	149	! 1053 2012-11-13 17:11:03Z hoffmann
[2259]	150	! necessary expansions according to the two new prognostic equations (nr, qr)
[1053]	151	! of the two-moment cloud physics scheme:
	152	! +bc__b, +bc__t, +bc__t_val, _init, _surface, _surface_initial_change,
	153	! +_vertical_gradient, +_vertical_gradient_level, *_vertical_gradient_level_ind,
	154	! +surface_waterflux_*
[601]	155	!
[2259]	156	! in addition, steering parameters parameters of the two-moment cloud physics
	157	! scheme:
[1053]	158	! +cloud_scheme, +drizzle, +mu_constant, +mu_constant_value, +ventilation_effect
[1017]	159	!
[1037]	160	! 1036 2012-10-22 13:43:42Z raasch
	161	! code put under GPL (PALM 3.9)
	162	!
[1017]	163	! 1015 2012-09-27 09:23:24Z raasch
	164	! -adjust_mixing_length
	165	!
[1004]	166	! 1003 2012-09-14 14:35:53Z raasch
	167	! -grid_matching
	168	!
[1002]	169	! 1001 2012-09-13 14:08:46Z raasch
	170	! -cut_spline_overshoot, dt_fixed, last_dt_change, long_filter_factor,
	171	! overshoot_limit_, ups_limit_
	172	!
[979]	173	! 978 2012-08-09 08:28:32Z fricke
	174	! -km_damp_max, outflow_damping_width
	175	! +pt_damping_factor, pt_damping_width
	176	! +z0h_factor
	177	!
[941]	178	! 940 2012-07-09 14:31:00Z raasch
	179	! +neutral
	180	!
[928]	181	! 927 2012-06-06 19:15:04Z raasch
	182	! +masking_method
	183	!
[850]	184	! 849 2012-03-15 10:35:09Z raasch
	185	! first_call_advec_particles renamed first_call_lpm
	186	!
[826]	187	! 824 2012-02-17 09:09:57Z raasch
	188	! +curvature_solution_effects
	189	!
[1]	190	! Revision 1.1 1998/03/18 20:18:48 raasch
	191	! Initial revision
	192	!
	193	!
	194	! Description:
	195	! ------------
[1682]	196	!> Reading values of global control variables from restart-file (binary format)
[1]	197	!------------------------------------------------------------------------------!
[1682]	198	SUBROUTINE read_var_list
[1]	199
[2259]	200
[1320]	201	USE arrays_3d, &
[1484]	202	ONLY: inflow_damping_factor, mean_inflow_profiles, pt_init, &
[1960]	203	q_init, ref_state, s_init, sa_init, u_init, ug, v_init, vg
[1320]	204
[87]	205	USE control_parameters
[1320]	206
[1957]	207	USE flight_mod, &
	208	ONLY: flight_read_restart_data
[2259]	209
[1320]	210	USE grid_variables, &
	211	ONLY: dx, dy
	212
	213	USE indices, &
	214	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	215
[1849]	216	USE microphysics_mod, &
	217	ONLY: c_sedimentation, collision_turbulence, &
	218	cloud_water_sedimentation, limiter_sedimentation, &
	219	nc_const, ventilation_effect
	220
[1320]	221	USE model_1d, &
	222	ONLY: damp_level_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
	223
[1783]	224	USE netcdf_interface, &
	225	ONLY: netcdf_precision, output_for_t0
[1320]	226
	227	USE particle_attributes, &
[2265]	228	ONLY: curvature_solution_effects
[1320]	229
[1]	230	USE pegrid
	231
[1585]	232	USE radiation_model_mod, &
[1833]	233	ONLY: time_radiation
[1585]	234
[1833]	235	USE spectra_mod, &
	236	ONLY: average_count_sp
	237
[1320]	238	USE statistics, &
	239	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	240	v_max, v_max_ijk, w_max, w_max_ijk
	241
[2259]	242	USE synthetic_turbulence_generator_mod, &
	243	ONLY: stg_read_restart_data
[1691]	244
[1]	245	IMPLICIT NONE
	246
	247	CHARACTER (LEN=10) :: binary_version, version_on_file
	248	CHARACTER (LEN=30) :: variable_chr
[87]	249
[143]	250
[1]	251	CALL check_open( 13 )
	252
	253	!
	254	!-- Make version number check first
	255	READ ( 13 ) version_on_file
[1831]	256	binary_version = '4.1'
[1]	257	IF ( TRIM( version_on_file ) /= TRIM( binary_version ) ) THEN
[257]	258	WRITE( message_string, * ) 'version mismatch concerning control ', &
	259	'variables', &
	260	'&version on file = "', &
	261	TRIM( version_on_file ), '"', &
	262	'&version on program = "', &
	263	TRIM( binary_version ), '"'
	264	CALL message( 'read_var_list', 'PA0296', 1, 2, 0, 6, 0 )
[1]	265	ENDIF
	266
	267	!
[145]	268	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	269	!-- run
	270	READ ( 13 ) variable_chr
	271	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	272	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	273	'run on PE ', myid
[257]	274	CALL message( 'read_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[145]	275	ENDIF
	276	READ ( 13 ) numprocs_previous_run
	277
[146]	278	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	279	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	280	ENDIF
[145]	281
	282	READ ( 13 ) variable_chr
	283	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	284	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	285	'prior run on PE ', myid
	286	CALL message( 'read_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[145]	287	ENDIF
	288	READ ( 13 ) hor_index_bounds_previous_run
	289
	290	!
[1]	291	!-- Read vertical number of gridpoints and number of different areas used
	292	!-- for computing statistics. Allocate arrays depending on these values,
	293	!-- which are needed for the following read instructions.
	294	READ ( 13 ) variable_chr
	295	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	296	WRITE( message_string, * ) 'nz not found in data from prior run on PE ',&
	297	myid
	298	CALL message( 'read_var_list', 'PA0299', 1, 2, 0, 6, 0 )
[1]	299	ENDIF
	300	READ ( 13 ) nz
[87]	301
[1]	302	READ ( 13 ) variable_chr
[87]	303	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	304	WRITE( message_string, * ) 'max_pr_user not found in data from ', &
[87]	305	'prior run on PE ', myid
[257]	306	CALL message( 'read_var_list', 'PA0300', 1, 2, 0, 6, 0 )
[87]	307	ENDIF
[159]	308	READ ( 13 ) max_pr_user ! This value is checked against the number of
	309	! user profiles given for the current run
	310	! in routine user_parin (it has to match)
[87]	311
	312	READ ( 13 ) variable_chr
[1]	313	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	314	WRITE( message_string, * ) 'statistic_regions not found in data from ', &
[1]	315	'prior run on PE ', myid
[257]	316	CALL message( 'read_var_list', 'PA0301', 1, 2, 0, 6, 0 )
[1]	317	ENDIF
	318	READ ( 13 ) statistic_regions
[146]	319	IF ( .NOT. ALLOCATED( ug ) ) THEN
[1502]	320	ALLOCATE( ug(0:nz+1), u_init(0:nz+1), vg(0:nz+1), &
	321	v_init(0:nz+1), pt_init(0:nz+1), q_init(0:nz+1), &
[1960]	322	ref_state(0:nz+1), s_init(0:nz+1), sa_init(0:nz+1), &
[1502]	323	hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions), &
[146]	324	hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
	325	ENDIF
[1]	326
	327	!
	328	!-- Now read all control parameters:
	329	!-- Caution: When the following read instructions have been changed, the
	330	!-- ------- version number stored in the variable binary_version has to be
	331	!-- increased. The same changes must also be done in write_var_list.
	332	READ ( 13 ) variable_chr
	333	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	334
	335	SELECT CASE ( TRIM( variable_chr ) )
	336
	337	CASE ( 'advected_distance_x' )
	338	READ ( 13 ) advected_distance_x
	339	CASE ( 'advected_distance_y' )
	340	READ ( 13 ) advected_distance_y
	341	CASE ( 'alpha_surface' )
	342	READ ( 13 ) alpha_surface
	343	CASE ( 'average_count_pr' )
	344	READ ( 13 ) average_count_pr
	345	CASE ( 'average_count_sp' )
	346	READ ( 13 ) average_count_sp
	347	CASE ( 'average_count_3d' )
	348	READ ( 13 ) average_count_3d
	349	CASE ( 'bc_e_b' )
	350	READ ( 13 ) bc_e_b
	351	CASE ( 'bc_lr' )
	352	READ ( 13 ) bc_lr
	353	CASE ( 'bc_ns' )
	354	READ ( 13 ) bc_ns
	355	CASE ( 'bc_p_b' )
	356	READ ( 13 ) bc_p_b
	357	CASE ( 'bc_p_t' )
	358	READ ( 13 ) bc_p_t
	359	CASE ( 'bc_pt_b' )
	360	READ ( 13 ) bc_pt_b
	361	CASE ( 'bc_pt_t' )
	362	READ ( 13 ) bc_pt_t
	363	CASE ( 'bc_pt_t_val' )
	364	READ ( 13 ) bc_pt_t_val
	365	CASE ( 'bc_q_b' )
	366	READ ( 13 ) bc_q_b
	367	CASE ( 'bc_q_t' )
	368	READ ( 13 ) bc_q_t
	369	CASE ( 'bc_q_t_val' )
	370	READ ( 13 ) bc_q_t_val
	371	CASE ( 'bc_s_b' )
	372	READ ( 13 ) bc_s_b
	373	CASE ( 'bc_s_t' )
	374	READ ( 13 ) bc_s_t
[95]	375	CASE ( 'bc_sa_t' )
	376	READ ( 13 ) bc_sa_t
[1]	377	CASE ( 'bc_uv_b' )
	378	READ ( 13 ) bc_uv_b
	379	CASE ( 'bc_uv_t' )
	380	READ ( 13 ) bc_uv_t
[95]	381	CASE ( 'bottom_salinityflux' )
	382	READ ( 13 ) bottom_salinityflux
[1]	383	CASE ( 'building_height' )
	384	READ ( 13 ) building_height
	385	CASE ( 'building_length_x' )
	386	READ ( 13 ) building_length_x
	387	CASE ( 'building_length_y' )
	388	READ ( 13 ) building_length_y
	389	CASE ( 'building_wall_left' )
	390	READ ( 13 ) building_wall_left
	391	CASE ( 'building_wall_south' )
	392	READ ( 13 ) building_wall_south
[600]	393	CASE ( 'call_psolver_at_all_substeps' )
	394	READ ( 13 ) call_psolver_at_all_substeps
[240]	395	CASE ( 'canyon_height' )
	396	READ ( 13 ) canyon_height
	397	CASE ( 'canyon_width_x' )
	398	READ ( 13 ) canyon_width_x
	399	CASE ( 'canyon_width_y' )
	400	READ ( 13 ) canyon_width_y
	401	CASE ( 'canyon_wall_left' )
	402	READ ( 13 ) canyon_wall_left
	403	CASE ( 'canyon_wall_south' )
	404	READ ( 13 ) canyon_wall_south
[1065]	405	CASE ( 'c_sedimentation' )
	406	READ ( 13 ) c_sedimentation
[600]	407	CASE ( 'cfl_factor' )
	408	READ ( 13 ) cfl_factor
[1]	409	CASE ( 'cloud_droplets' )
	410	READ ( 13 ) cloud_droplets
	411	CASE ( 'cloud_physics' )
	412	READ ( 13 ) cloud_physics
[1053]	413	CASE ( 'cloud_scheme' )
	414	READ ( 13 ) cloud_scheme
[622]	415	CASE ( 'collective_wait' )
	416	READ ( 13 ) collective_wait
[1]	417	CASE ( 'conserve_volume_flow' )
	418	READ ( 13 ) conserve_volume_flow
[241]	419	CASE ( 'conserve_volume_flow_mode' )
	420	READ ( 13 ) conserve_volume_flow_mode
[1691]	421	CASE ( 'constant_flux_layer' )
	422	READ ( 13 ) constant_flux_layer
[291]	423	CASE ( 'coupling_start_time' )
	424	READ ( 13 ) coupling_start_time
[1]	425	CASE ( 'current_timestep_number' )
	426	READ ( 13 ) current_timestep_number
[824]	427	CASE ( 'curvature_solution_effects' )
	428	READ ( 13 ) curvature_solution_effects
[600]	429	CASE ( 'cycle_mg' )
	430	READ ( 13 ) cycle_mg
[1]	431	CASE ( 'damp_level_1d' )
	432	READ ( 13 ) damp_level_1d
	433	CASE ( 'dissipation_1d' )
	434	READ ( 13 ) dissipation_1d
[1308]	435	CASE ( 'do2d_xy_time_count' )
	436	READ ( 13 ) do2d_xy_time_count
	437	CASE ( 'do2d_xz_time_count' )
	438	READ ( 13 ) do2d_xz_time_count
	439	CASE ( 'do2d_yz_time_count' )
	440	READ ( 13 ) do2d_yz_time_count
	441	CASE ( 'do3d_time_count' )
	442	READ ( 13 ) do3d_time_count
[240]	443	CASE ( 'dp_external' )
	444	READ ( 13 ) dp_external
	445	CASE ( 'dp_level_b' )
	446	READ ( 13 ) dp_level_b
	447	CASE ( 'dp_smooth' )
	448	READ ( 13 ) dp_smooth
	449	CASE ( 'dpdxy' )
	450	READ ( 13 ) dpdxy
[1831]	451	CASE ( 'cloud_water_sedimentation' )
	452	READ ( 13 ) cloud_water_sedimentation
[1]	453	CASE ( 'dt_pr_1d' )
	454	READ ( 13 ) dt_pr_1d
	455	CASE ( 'dt_run_control_1d' )
	456	READ ( 13 ) dt_run_control_1d
	457	CASE ( 'dt_3d' )
	458	READ ( 13 ) dt_3d
	459	CASE ( 'dvrp_filecount' )
	460	READ ( 13 ) dvrp_filecount
	461	CASE ( 'dx' )
	462	READ ( 13 ) dx
	463	CASE ( 'dy' )
	464	READ ( 13 ) dy
	465	CASE ( 'dz' )
	466	READ ( 13 ) dz
	467	CASE ( 'dz_max' )
	468	READ ( 13 ) dz_max
	469	CASE ( 'dz_stretch_factor' )
	470	READ ( 13 ) dz_stretch_factor
	471	CASE ( 'dz_stretch_level' )
	472	READ ( 13 ) dz_stretch_level
	473	CASE ( 'e_min' )
	474	READ ( 13 ) e_min
	475	CASE ( 'end_time_1d' )
	476	READ ( 13 ) end_time_1d
	477	CASE ( 'fft_method' )
	478	READ ( 13 ) fft_method
[849]	479	CASE ( 'first_call_lpm' )
	480	READ ( 13 ) first_call_lpm
[1]	481	CASE ( 'galilei_transformation' )
	482	READ ( 13 ) galilei_transformation
	483	CASE ( 'hom' )
	484	READ ( 13 ) hom
[143]	485	CASE ( 'hom_sum' )
	486	READ ( 13 ) hom_sum
[151]	487	CASE ( 'humidity' )
	488	READ ( 13 ) humidity
	489	CASE ( 'inflow_damping_factor' )
	490	IF ( .NOT. ALLOCATED( inflow_damping_factor ) ) THEN
	491	ALLOCATE( inflow_damping_factor(0:nz+1) )
	492	ENDIF
	493	READ ( 13 ) inflow_damping_factor
	494	CASE ( 'inflow_damping_height' )
	495	READ ( 13 ) inflow_damping_height
	496	CASE ( 'inflow_damping_width' )
	497	READ ( 13 ) inflow_damping_width
[1]	498	CASE ( 'inflow_disturbance_begin' )
	499	READ ( 13 ) inflow_disturbance_begin
	500	CASE ( 'inflow_disturbance_end' )
	501	READ ( 13 ) inflow_disturbance_end
	502	CASE ( 'km_constant' )
	503	READ ( 13 ) km_constant
[1241]	504	CASE ( 'large_scale_forcing' )
	505	READ ( 13 ) large_scale_forcing
[411]	506	CASE ( 'large_scale_subsidence' )
	507	READ ( 13 ) large_scale_subsidence
[1065]	508	CASE ( 'limiter_sedimentation' )
	509	READ ( 13 ) limiter_sedimentation
[63]	510	CASE ( 'loop_optimization' )
	511	READ ( 13 ) loop_optimization
[927]	512	CASE ( 'masking_method' )
	513	READ ( 13 ) masking_method
[151]	514	CASE ( 'mean_inflow_profiles' )
	515	IF ( .NOT. ALLOCATED( mean_inflow_profiles ) ) THEN
[1960]	516	ALLOCATE( mean_inflow_profiles(0:nz+1,7) )
[151]	517	ENDIF
	518	READ ( 13 ) mean_inflow_profiles
[600]	519	CASE ( 'mg_cycles' )
	520	READ ( 13 ) mg_cycles
	521	CASE ( 'mg_switch_to_pe0_level' )
	522	READ ( 13 ) mg_switch_to_pe0_level
[1]	523	CASE ( 'mixing_length_1d' )
	524	READ ( 13 ) mixing_length_1d
	525	CASE ( 'momentum_advec' )
	526	READ ( 13 ) momentum_advec
[1691]	527	CASE ( 'most_method' )
	528	READ ( 13 ) most_method
[1115]	529	CASE ( 'nc_const' )
	530	READ ( 13 ) nc_const
[1]	531	CASE ( 'netcdf_precision' )
	532	READ ( 13 ) netcdf_precision
[940]	533	CASE ( 'neutral' )
	534	READ ( 13 ) neutral
[600]	535	CASE ( 'ngsrb' )
	536	READ ( 13 ) ngsrb
	537	CASE ( 'nsor' )
	538	READ ( 13 ) nsor
[1]	539	CASE ( 'nsor_ini' )
	540	READ ( 13 ) nsor_ini
[1241]	541	CASE ( 'nudging' )
	542	READ ( 13 ) nudging
[1957]	543	CASE ( 'num_leg' )
	544	READ ( 13 ) num_leg
[1]	545	CASE ( 'nx' )
	546	READ ( 13 ) nx
[147]	547	nx_on_file = nx
[1]	548	CASE ( 'ny' )
	549	READ ( 13 ) ny
[147]	550	ny_on_file = ny
[94]	551	CASE ( 'ocean' )
	552	READ ( 13 ) ocean
[1]	553	CASE ( 'old_dt' )
	554	READ ( 13 ) old_dt
	555	CASE ( 'omega' )
	556	READ ( 13 ) omega
[600]	557	CASE ( 'omega_sor' )
	558	READ ( 13 ) omega_sor
[345]	559	CASE ( 'output_for_t0' )
	560	READ (13) output_for_t0
[1]	561	CASE ( 'passive_scalar' )
	562	READ ( 13 ) passive_scalar
	563	CASE ( 'phi' )
	564	READ ( 13 ) phi
[600]	565	CASE ( 'prandtl_number' )
	566	READ ( 13 ) prandtl_number
[1]	567	CASE ( 'precipitation' )
	568	READ ( 13 ) precipitation
[600]	569	CASE ( 'psolver' )
	570	READ ( 13 ) psolver
[978]	571	CASE ( 'pt_damping_factor' )
	572	READ ( 13 ) pt_damping_factor
	573	CASE ( 'pt_damping_width' )
	574	READ ( 13 ) pt_damping_width
[1]	575	CASE ( 'pt_init' )
	576	READ ( 13 ) pt_init
[57]	577	CASE ( 'pt_reference' )
	578	READ ( 13 ) pt_reference
[1]	579	CASE ( 'pt_surface' )
	580	READ ( 13 ) pt_surface
	581	CASE ( 'pt_surface_initial_change' )
	582	READ ( 13 ) pt_surface_initial_change
	583	CASE ( 'pt_vertical_gradient' )
	584	READ ( 13 ) pt_vertical_gradient
	585	CASE ( 'pt_vertical_gradient_level' )
	586	READ ( 13 ) pt_vertical_gradient_level
	587	CASE ( 'pt_vertical_gradient_level_ind' )
	588	READ ( 13 ) pt_vertical_gradient_level_ind
	589	CASE ( 'q_init' )
	590	READ ( 13 ) q_init
	591	CASE ( 'q_surface' )
	592	READ ( 13 ) q_surface
	593	CASE ( 'q_surface_initial_change' )
	594	READ ( 13 ) q_surface_initial_change
	595	CASE ( 'q_vertical_gradient' )
	596	READ ( 13 ) q_vertical_gradient
	597	CASE ( 'q_vertical_gradient_level' )
	598	READ ( 13 ) q_vertical_gradient_level
	599	CASE ( 'q_vertical_gradient_level_ind' )
	600	READ ( 13 ) q_vertical_gradient_level_ind
[1496]	601	CASE ( 'cloud_top_radiation' )
	602	READ ( 13 ) cloud_top_radiation
[1]	603	CASE ( 'random_generator' )
	604	READ ( 13 ) random_generator
	605	CASE ( 'random_heatflux' )
	606	READ ( 13 ) random_heatflux
[600]	607	CASE ( 'rayleigh_damping_factor' )
	608	READ ( 13 ) rayleigh_damping_factor
	609	CASE ( 'rayleigh_damping_height' )
	610	READ ( 13 ) rayleigh_damping_height
[151]	611	CASE ( 'recycling_width' )
	612	READ ( 13 ) recycling_width
[1560]	613	CASE ( 'recycling_yshift' )
	614	READ ( 13 ) recycling_yshift
[1179]	615	CASE ( 'reference_state' )
	616	READ ( 13 ) reference_state
	617	CASE ( 'ref_state' )
	618	READ ( 13 ) ref_state
[600]	619	CASE ( 'residual_limit' )
	620	READ ( 13 ) residual_limit
[1]	621	CASE ( 'roughness_length' )
	622	READ ( 13 ) roughness_length
	623	CASE ( 'runnr' )
	624	READ ( 13 ) runnr
[291]	625	CASE ( 'run_coupled' )
	626	READ ( 13 ) run_coupled
[1960]	627	CASE ( 's_init' )
	628	READ ( 13 ) s_init
	629	CASE ( 's_surface' )
	630	READ ( 13 ) s_surface
	631	CASE ( 's_surface_initial_change' )
	632	READ ( 13 ) s_surface_initial_change
	633	CASE ( 's_vertical_gradient' )
	634	READ ( 13 ) s_vertical_gradient
	635	CASE ( 's_vertical_gradient_level' )
	636	READ ( 13 ) s_vertical_gradient_level
	637	CASE ( 's_vertical_gradient_level_ind' )
[2259]	638	READ ( 13 ) s_vertical_gradient_level_ind
[94]	639	CASE ( 'sa_init' )
	640	READ ( 13 ) sa_init
	641	CASE ( 'sa_surface' )
	642	READ ( 13 ) sa_surface
	643	CASE ( 'sa_vertical_gradient' )
	644	READ ( 13 ) sa_vertical_gradient
	645	CASE ( 'sa_vertical_gradient_level' )
	646	READ ( 13 ) sa_vertical_gradient_level
[1]	647	CASE ( 'scalar_advec' )
	648	READ ( 13 ) scalar_advec
	649	CASE ( 'simulated_time' )
	650	READ ( 13 ) simulated_time
	651	CASE ( 'surface_heatflux' )
	652	READ ( 13 ) surface_heatflux
	653	CASE ( 'surface_pressure' )
	654	READ ( 13 ) surface_pressure
	655	CASE ( 'surface_scalarflux' )
[2259]	656	READ ( 13 ) surface_scalarflux
[1]	657	CASE ( 'surface_waterflux' )
[2259]	658	READ ( 13 ) surface_waterflux
[102]	659	CASE ( 'time_coupling' )
	660	READ ( 13 ) time_coupling
[1]	661	CASE ( 'time_disturb' )
	662	READ ( 13 ) time_disturb
[1502]	663	CASE ( 'time_dopr' )
[1]	664	READ ( 13 ) time_dopr
[587]	665	CASE ( 'time_domask' )
	666	READ ( 13 ) time_domask
[1]	667	CASE ( 'time_dopr_av' )
	668	READ ( 13 ) time_dopr_av
	669	CASE ( 'time_dopr_listing' )
	670	READ ( 13 ) time_dopr_listing
	671	CASE ( 'time_dopts' )
	672	READ ( 13 ) time_dopts
	673	CASE ( 'time_dosp' )
	674	READ ( 13 ) time_dosp
	675	CASE ( 'time_dots' )
	676	READ ( 13 ) time_dots
	677	CASE ( 'time_do2d_xy' )
	678	READ ( 13 ) time_do2d_xy
	679	CASE ( 'time_do2d_xz' )
	680	READ ( 13 ) time_do2d_xz
	681	CASE ( 'time_do2d_yz' )
	682	READ ( 13 ) time_do2d_yz
	683	CASE ( 'time_do3d' )
	684	READ ( 13 ) time_do3d
	685	CASE ( 'time_do_av' )
	686	READ ( 13 ) time_do_av
	687	CASE ( 'time_do_sla' )
	688	READ ( 13 ) time_do_sla
	689	CASE ( 'time_dvrp' )
	690	READ ( 13 ) time_dvrp
[1585]	691	CASE ( 'time_radiation' )
	692	READ ( 13 ) time_radiation
[1]	693	CASE ( 'time_restart' )
	694	READ ( 13 ) time_restart
	695	CASE ( 'time_run_control' )
	696	READ ( 13 ) time_run_control
[291]	697	CASE ( 'time_since_reference_point' )
	698	READ ( 13 ) time_since_reference_point
[1]	699	CASE ( 'timestep_scheme' )
	700	READ ( 13 ) timestep_scheme
	701	CASE ( 'topography' )
	702	READ ( 13 ) topography
[256]	703	CASE ( 'topography_grid_convention' )
	704	READ ( 13 ) topography_grid_convention
[19]	705	CASE ( 'top_heatflux' )
	706	READ ( 13 ) top_heatflux
[102]	707	CASE ( 'top_momentumflux_u' )
	708	READ ( 13 ) top_momentumflux_u
	709	CASE ( 'top_momentumflux_v' )
	710	READ ( 13 ) top_momentumflux_v
[94]	711	CASE ( 'top_salinityflux' )
	712	READ ( 13 ) top_salinityflux
[1992]	713	CASE ( 'top_scalarflux' )
	714	READ ( 13 ) top_scalarflux
[1]	715	CASE ( 'tsc' )
	716	READ ( 13 ) tsc
[1831]	717	CASE ( 'collision_turbulence' )
	718	READ ( 13 ) collision_turbulence
[2232]	719	CASE ( 'tunnel_height' )
	720	READ ( 13 ) tunnel_height
	721	CASE ( 'tunnel_length' )
	722	READ ( 13 ) tunnel_length
	723	CASE ( 'tunnel_width_x' )
	724	READ ( 13 ) tunnel_width_x
	725	CASE ( 'tunnel_width_y' )
	726	READ ( 13 ) tunnel_width_y
	727	CASE ( 'tunnel_wall_depth' )
	728	READ ( 13 ) tunnel_wall_depth
[151]	729	CASE ( 'turbulent_inflow' )
	730	READ ( 13 ) turbulent_inflow
[241]	731	CASE ( 'u_bulk' )
	732	READ ( 13 ) u_bulk
[1]	733	CASE ( 'u_init' )
	734	READ ( 13 ) u_init
	735	CASE ( 'u_max' )
	736	READ ( 13 ) u_max
	737	CASE ( 'u_max_ijk' )
	738	READ ( 13 ) u_max_ijk
	739	CASE ( 'ug' )
	740	READ ( 13 ) ug
	741	CASE ( 'ug_surface' )
	742	READ ( 13 ) ug_surface
	743	CASE ( 'ug_vertical_gradient' )
	744	READ ( 13 ) ug_vertical_gradient
	745	CASE ( 'ug_vertical_gradient_level' )
	746	READ ( 13 ) ug_vertical_gradient_level
	747	CASE ( 'ug_vertical_gradient_level_ind' )
	748	READ ( 13 ) ug_vertical_gradient_level_ind
	749	CASE ( 'use_surface_fluxes' )
	750	READ ( 13 ) use_surface_fluxes
[20]	751	CASE ( 'use_top_fluxes' )
	752	READ ( 13 ) use_top_fluxes
[1]	753	CASE ( 'use_ug_for_galilei_tr' )
	754	READ ( 13 ) use_ug_for_galilei_tr
	755	CASE ( 'use_upstream_for_tke' )
	756	READ ( 13 ) use_upstream_for_tke
[241]	757	CASE ( 'v_bulk' )
	758	READ ( 13 ) v_bulk
[1]	759	CASE ( 'v_init' )
	760	READ ( 13 ) v_init
	761	CASE ( 'v_max' )
	762	READ ( 13 ) v_max
	763	CASE ( 'v_max_ijk' )
	764	READ ( 13 ) v_max_ijk
[1053]	765	CASE ( 'ventilation_effect' )
	766	READ ( 13 ) ventilation_effect
[1]	767	CASE ( 'vg' )
	768	READ ( 13 ) vg
	769	CASE ( 'vg_surface' )
	770	READ ( 13 ) vg_surface
	771	CASE ( 'vg_vertical_gradient' )
	772	READ ( 13 ) vg_vertical_gradient
	773	CASE ( 'vg_vertical_gradient_level' )
	774	READ ( 13 ) vg_vertical_gradient_level
	775	CASE ( 'vg_vertical_gradient_level_ind' )
	776	READ ( 13 ) vg_vertical_gradient_level_ind
[1957]	777	CASE ( 'virtual_flight' )
[2259]	778	READ ( 13 ) virtual_flight
[143]	779	CASE ( 'volume_flow_area' )
	780	READ ( 13 ) volume_flow_area
	781	CASE ( 'volume_flow_initial' )
	782	READ ( 13 ) volume_flow_initial
[1]	783	CASE ( 'wall_adjustment' )
	784	READ ( 13 ) wall_adjustment
[580]	785	CASE ( 'subs_vertical_gradient' )
	786	READ ( 13 ) subs_vertical_gradient
	787	CASE ( 'subs_vertical_gradient_level' )
	788	READ ( 13 ) subs_vertical_gradient_level
	789	CASE ( 'subs_vertical_gradient_level_i' )
	790	READ ( 13 ) subs_vertical_gradient_level_i
[2042]	791	CASE ( 'wall_heatflux' )
	792	READ ( 13 ) wall_heatflux
[2232]	793	CASE ( 'wall_humidityflux' )
	794	READ ( 13 ) wall_humidityflux
	795	CASE ( 'wall_scalarflux' )
	796	READ ( 13 ) wall_scalarflux
	797	CASE ( 'wall_salinityflux' )
	798	READ ( 13 ) wall_salinityflux
[1]	799	CASE ( 'w_max' )
	800	READ ( 13 ) w_max
	801	CASE ( 'w_max_ijk' )
	802	READ ( 13 ) w_max_ijk
[1691]	803	CASE ( 'zeta_max' )
	804	READ ( 13 ) zeta_max
	805	CASE ( 'zeta_min' )
	806	READ ( 13 ) zeta_min
[978]	807	CASE ( 'z0h_factor' )
	808	READ ( 13 ) z0h_factor
[1]	809
	810	CASE DEFAULT
[257]	811	WRITE( message_string, * ) 'unknown variable named "', &
	812	TRIM( variable_chr ), '" found in', &
[2259]	813	' data from prior run on PE ', myid
[257]	814	CALL message( 'read_var_list', 'PA0302', 1, 2, 0, 6, 0 )
[1]	815	END SELECT
	816	!
	817	!-- Read next string
	818	READ ( 13 ) variable_chr
	819
	820	ENDDO
[2259]	821
[1957]	822	IF ( virtual_flight ) CALL flight_read_restart_data
[1]	823
[2259]	824	IF ( synthetic_turbulence_generator ) CALL stg_read_restart_data
[1]	825
[146]	826	END SUBROUTINE read_var_list
[143]	827
[146]	828
	829
[147]	830	!------------------------------------------------------------------------------!
	831	! Description:
	832	! ------------
[1682]	833	!> Skipping the global control variables from restart-file (binary format)
	834	!> except some information needed when reading restart data from a previous
	835	!> run which used a smaller total domain or/and a different domain decomposition.
[147]	836	!------------------------------------------------------------------------------!
[2259]	837
[1682]	838	SUBROUTINE read_parts_of_var_list
[147]	839
[1682]	840
[1320]	841	USE arrays_3d, &
[1960]	842	ONLY: inflow_damping_factor, mean_inflow_profiles, ref_state, ug, vg
[1320]	843
[147]	844	USE control_parameters
[1320]	845
	846	USE indices, &
	847	ONLY: nz, nx, nx_on_file, ny, ny_on_file
	848
	849	USE kinds
	850
[147]	851	USE pegrid
	852
[1320]	853	USE statistics, &
	854	ONLY: statistic_regions, hom, hom_sum, pr_palm, u_max, u_max_ijk, &
	855	v_max, v_max_ijk, w_max, w_max_ijk
	856
[147]	857	IMPLICIT NONE
	858
	859	CHARACTER (LEN=10) :: version_on_file
[1521]	860	CHARACTER (LEN=20) :: momentum_advec_check
	861	CHARACTER (LEN=20) :: scalar_advec_check
[147]	862	CHARACTER (LEN=30) :: variable_chr
[626]	863	CHARACTER (LEN=1) :: cdum
[147]	864
[1320]	865	INTEGER(iwp) :: max_pr_user_on_file
	866	INTEGER(iwp) :: nz_on_file
	867	INTEGER(iwp) :: statistic_regions_on_file
	868	INTEGER(iwp) :: tmp_mpru
	869	INTEGER(iwp) :: tmp_sr
[147]	870
[1320]	871	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: hom_sum_on_file
	872	REAL(wp), DIMENSION(:,:,:,:), ALLOCATABLE :: hom_on_file
[147]	873
	874
	875	CALL check_open( 13 )
	876
	877	READ ( 13 ) version_on_file
	878
[2232]	879
[147]	880	!
	881	!-- Read number of PEs and horizontal index bounds of all PEs used in previous
	882	!-- run
	883	READ ( 13 ) variable_chr
	884	IF ( TRIM( variable_chr ) /= 'numprocs' ) THEN
[274]	885	WRITE( message_string, * ) 'numprocs not found in data from prior ', &
	886	'run on PE ', myid
[257]	887	CALL message( 'read_parts_of_var_list', 'PA0297', 1, 2, 0, 6, 0 )
[147]	888	ENDIF
	889	READ ( 13 ) numprocs_previous_run
	890
	891	IF ( .NOT. ALLOCATED( hor_index_bounds_previous_run ) ) THEN
	892	ALLOCATE( hor_index_bounds_previous_run(4,0:numprocs_previous_run-1) )
	893	ENDIF
	894
	895	READ ( 13 ) variable_chr
	896	IF ( TRIM( variable_chr ) /= 'hor_index_bounds' ) THEN
[257]	897	WRITE( message_string, * ) 'hor_index_bounds not found in data from ', &
	898	'prior run on PE ', myid
	899	CALL message( 'read_parts_of_var_list', 'PA0298', 1, 2, 0, 6, 0 )
[147]	900	ENDIF
	901	READ ( 13 ) hor_index_bounds_previous_run
	902
	903	!
	904	!-- Read vertical number of gridpoints and number of different areas used
	905	!-- for computing statistics. Allocate arrays depending on these values,
	906	!-- which are needed for the following read instructions.
	907	READ ( 13 ) variable_chr
	908	IF ( TRIM( variable_chr ) /= 'nz' ) THEN
[257]	909	message_string = 'nz not found in restart data file'
	910	CALL message( 'read_parts_of_var_list', 'PA0303', 1, 2, 0, 6, 0 )
[147]	911	ENDIF
	912	READ ( 13 ) nz_on_file
	913	IF ( nz_on_file /= nz ) THEN
[257]	914	WRITE( message_string, * ) 'mismatch concerning number of ', &
[274]	915	'gridpoints along z', &
	916	'&nz on file = "', nz_on_file, '"', &
	917	'&nz from run = "', nz, '"'
[257]	918	CALL message( 'read_parts_of_var_list', 'PA0304', 1, 2, 0, 6, 0 )
[147]	919	ENDIF
	920
	921	READ ( 13 ) variable_chr
	922	IF ( TRIM( variable_chr ) /= 'max_pr_user' ) THEN
[257]	923	message_string = 'max_pr_user not found in restart data file'
	924	CALL message( 'read_parts_of_var_list', 'PA0305', 1, 2, 0, 6, 0 )
[147]	925	ENDIF
	926	READ ( 13 ) max_pr_user_on_file
[170]	927	IF ( max_pr_user_on_file /= max_pr_user ) THEN
[274]	928	WRITE( message_string, * ) 'number of user profiles on res', &
	929	'tart data file differs from the current ', &
	930	'run&max_pr_user on file = "', &
	931	max_pr_user_on_file, '"', &
	932	'&max_pr_user from run = "', &
[257]	933	max_pr_user, '"'
	934	CALL message( 'read_parts_of_var_list', 'PA0306', 0, 0, 0, 6, 0 )
[170]	935	tmp_mpru = MIN( max_pr_user_on_file, max_pr_user )
	936	ELSE
	937	tmp_mpru = max_pr_user
[147]	938	ENDIF
	939
	940	READ ( 13 ) variable_chr
	941	IF ( TRIM( variable_chr ) /= 'statistic_regions' ) THEN
[257]	942	message_string = 'statistic_regions not found in restart data file'
	943	CALL message( 'read_parts_of_var_list', 'PA0307', 1, 2, 0, 6, 0 )
[147]	944	ENDIF
	945	READ ( 13 ) statistic_regions_on_file
[173]	946	IF ( statistic_regions_on_file /= statistic_regions ) THEN
[2259]	947	WRITE( message_string, * ) 'statistic regions on restart data file ',&
[274]	948	'differ from the current run', &
	949	'&statistic regions on file = "', &
	950	statistic_regions_on_file, '"', &
	951	'&statistic regions from run = "', &
	952	statistic_regions, '"', &
[257]	953	'&statistic data may be lost!'
	954	CALL message( 'read_parts_of_var_list', 'PA0308', 0, 1, 0, 6, 0 )
[170]	955	tmp_sr = MIN( statistic_regions_on_file, statistic_regions )
	956	ELSE
	957	tmp_sr = statistic_regions
[147]	958	ENDIF
	959
	960	!
	961	!-- Now read and check some control parameters and skip the rest
	962	READ ( 13 ) variable_chr
	963
	964	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	965
	966	SELECT CASE ( TRIM( variable_chr ) )
	967
[151]	968	CASE ( 'average_count_pr' )
	969	READ ( 13 ) average_count_pr
[257]	970	IF ( average_count_pr /= 0 ) THEN
[274]	971	WRITE( message_string, * ) 'inflow profiles not temporally ', &
	972	'averaged. &Averaging will be done now using ', &
	973	average_count_pr, ' samples.'
	974	CALL message( 'read_parts_of_var_list', 'PA0309', &
	975	0, 1, 0, 6, 0 )
[151]	976	ENDIF
	977
[147]	978	CASE ( 'hom' )
	979	ALLOCATE( hom_on_file(0:nz+1,2,pr_palm+max_pr_user_on_file, &
	980	0:statistic_regions_on_file) )
	981	READ ( 13 ) hom_on_file
[170]	982	hom(:,:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	983	hom_on_file(:,:,1:pr_palm+tmp_mpru,0:tmp_sr)
[147]	984	DEALLOCATE( hom_on_file )
	985
[151]	986	CASE ( 'hom_sum' )
	987	ALLOCATE( hom_sum_on_file(0:nz+1,pr_palm+max_pr_user_on_file, &
	988	0:statistic_regions_on_file) )
	989	READ ( 13 ) hom_sum_on_file
[170]	990	hom_sum(:,1:pr_palm+tmp_mpru,0:tmp_sr) = &
	991	hom_sum_on_file(:,1:pr_palm+tmp_mpru,0:tmp_sr)
[151]	992	DEALLOCATE( hom_sum_on_file )
	993
[1521]	994	CASE ( 'momentum_advec' )
	995	momentum_advec_check = momentum_advec
	996	READ ( 13 ) momentum_advec
	997	IF ( TRIM( momentum_advec_check ) /= TRIM( momentum_advec ) ) THEN
[1524]	998	WRITE( message_string, * ) 'momentum_advec of the restart run ',&
[1521]	999	'differs from momentum_advec of the initial run.'
	1000	CALL message( 'read_parts_of_var_list', 'PA0100', &
	1001	1, 2, 0, 6, 0 )
[2259]	1002	END IF
	1003
[147]	1004	CASE ( 'nx' )
	1005	READ ( 13 ) nx_on_file
	1006
	1007	CASE ( 'ny' )
	1008	READ ( 13 ) ny_on_file
	1009
[1253]	1010	CASE ( 'ref_state' )
	1011	READ ( 13 ) ref_state
[147]	1012
[1521]	1013	CASE ( 'scalar_advec' )
	1014	scalar_advec_check = scalar_advec
	1015	READ ( 13 ) scalar_advec
	1016	IF ( TRIM( scalar_advec_check ) /= TRIM( scalar_advec ) ) THEN
[1524]	1017	WRITE( message_string, * ) 'scalar_advec of the restart run ', &
[1521]	1018	'differs from scalar_advec of the initial run.'
	1019	CALL message( 'read_parts_of_var_list', 'PA0101', &
	1020	1, 2, 0, 6, 0 )
[2259]	1021	END IF
	1022
[147]	1023	CASE DEFAULT
	1024
[626]	1025	READ ( 13 ) cdum
[147]	1026
	1027	END SELECT
	1028
	1029	READ ( 13 ) variable_chr
	1030
	1031	ENDDO
	1032
[151]	1033	!
	1034	!-- Calculate the temporal average of vertical profiles, if neccessary
	1035	IF ( average_count_pr /= 0 ) THEN
[1322]	1036	hom_sum = hom_sum / REAL( average_count_pr, KIND=wp )
[151]	1037	ENDIF
[147]	1038
[151]	1039
[147]	1040	END SUBROUTINE read_parts_of_var_list
	1041
	1042
	1043
[146]	1044	!------------------------------------------------------------------------------!
	1045	! Description:
	1046	! ------------
[1682]	1047	!> Skipping the global control variables from restart-file (binary format)
[146]	1048	!------------------------------------------------------------------------------!
[2259]	1049
[1682]	1050	SUBROUTINE skip_var_list
[146]	1051
[1957]	1052	USE control_parameters, &
	1053	ONLY: virtual_flight
[2259]	1054
[1957]	1055	USE flight_mod, &
	1056	ONLY: flight_skip_var_list
[2259]	1057
[147]	1058	IMPLICIT NONE
	1059
[146]	1060	CHARACTER (LEN=10) :: version_on_file
	1061	CHARACTER (LEN=30) :: variable_chr
	1062
[600]	1063	CHARACTER (LEN=1) :: cdum
[146]	1064
	1065
	1066	READ ( 13 ) version_on_file
	1067
	1068	READ ( 13 ) variable_chr
	1069
	1070	DO WHILE ( TRIM( variable_chr ) /= '* end *' )
	1071
[600]	1072	READ ( 13 ) cdum
[146]	1073	READ ( 13 ) variable_chr
	1074
	1075	ENDDO
[1957]	1076	!
[2259]	1077	!-- In case of virtual flights, skip also variables related to
[1957]	1078	!-- this module.
	1079	IF ( virtual_flight ) CALL flight_skip_var_list
[146]	1080
[2259]	1081
[146]	1082	END SUBROUTINE skip_var_list

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |