Home

Context Navigation

source: palm/trunk/SOURCE/plant_canopy_model_mod.f90 @ 4751

Last change on this file since 4751 was 4671, checked in by pavelkrc, 4 years ago
Radiative transfer model RTM version 4.1
Property svn:keywords set to `Id`
File size: 117.9 KB

Line
1	!> @file plant_canopy_model_mod.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2020 Leibniz Universitaet Hannover
18	! Copyright 2017-2020 Institute of Computer Science of the
19	! Czech Academy of Sciences, Prague
20	!------------------------------------------------------------------------------!
21	!
22	! Current revisions:
23	! ------------------
24	!
25	!
26	! Former revisions:
27	! -----------------
28	! $Id: plant_canopy_model_mod.f90 4671 2020-09-09 20:27:58Z knoop $
29	! Implementation of downward facing USM and LSM surfaces
30	!
31	! 4535 2020-05-15 12:07:23Z raasch
32	! bugfix for restart data format query
33	!
34	! 4525 2020-05-10 17:05:07Z raasch
35	! bugfix for reading/writing pcm_...rate_av with MPI-IO
36	!
37	! 4517 2020-05-03 14:29:30Z raasch
38	! added restart with MPI-IO for reading local arrays
39	!
40	! 4515 2020-04-30 16:37:18Z suehring
41	! Rename error number again since this was recently given in -r 4511
42	!
43	! 4514 2020-04-30 16:29:59Z suehring
44	! - Bugfix in output of pcm_heatrate_av in a restart run. In order to fix this,
45	! pch_index is now output for a restart run. Therefore, define global restart
46	! routines.
47	! - Error message number renamed and check for PA0505 revised in order to also
48	! consider natural surfaces with plant-canopy.
49	!
50	! 4495 2020-04-13 20:11:20Z raasch
51	! restart data handling with MPI-IO added
52	!
53	! 4457 2020-03-11 14:20:43Z raasch
54	!
55	! use statement for exchange horiz added
56	! (salim) removed the error message PA0672 to consider PC 3d data via ascii file
57	!
58	! 4392 2020-01-31 16:14:57Z pavelkrc (resler)
59	! Make pcm_heatrate_av, pcm_latentrate_av public to allow calculation
60	! of averaged Bowen ratio in the user procedure
61	!
62	! 4381 2020-01-20 13:51:46Z suehring
63	! Give error message 313 only once
64	!
65	! 4363 2020-01-07 18:11:28Z suehring
66	! Fix for last commit
67	!
68	! 4362 2020-01-07 17:15:02Z suehring
69	! Input of plant canopy variables from static driver moved to plant-canopy
70	! model
71	!
72	! 4361 2020-01-07 12:22:38Z suehring
73	! - Remove unused arrays in pmc_rrd_local
74	! - Remove one exchange of ghost points
75	!
76	! 4360 2020-01-07 11:25:50Z suehring
77	! - Bugfix, read restart data for time-averaged pcm output quantities
78	! - Output of plant-canopy quantities will fill values
79	!
80	! 4356 2019-12-20 17:09:33Z suehring
81	! Correct single message call, local check must be given by the respective
82	! mpi rank.
83	!
84	! 4346 2019-12-18 11:55:56Z motisi
85	! Introduction of wall_flags_total_0, which currently sets bits based on static
86	! topography information used in wall_flags_static_0
87	!
88	! 4342 2019-12-16 13:49:14Z Giersch
89	! Use statements moved to module level, ocean dependency removed, redundant
90	! variables removed
91	!
92	! 4341 2019-12-16 10:43:49Z motisi
93	! - Unification of variable names: pc_-variables now pcm_-variables
94	! (pc_latent_rate, pc_heating_rate, pc_transpiration_rate)
95	! - Removal of pcm_bowenratio output
96	! - Renamed canopy-mode 'block' to 'homogeneous'
97	! - Renamed value 'read_from_file_3d' to 'read_from_file'
98	! - Removal of confusing comment lines
99	! - Replacement of k_wall by topo_top_ind
100	! - Removal of Else-Statement in tendency-calculation
101	!
102	! 4335 2019-12-12 16:39:05Z suehring
103	! Fix for LAD at building edges also implemented in vector branch.
104	!
105	! 4331 2019-12-10 18:25:02Z suehring
106	! Typo corrected
107	!
108	! 4329 2019-12-10 15:46:36Z motisi
109	! Renamed wall_flags_0 to wall_flags_static_0
110	!
111	! 4314 2019-11-29 10:29:20Z suehring
112	! - Bugfix, plant canopy was still considered at building edges on for the u-
113	! and v-component.
114	! - Relax restriction of LAD on building tops. LAD is only omitted at
115	! locations where building grid points emerged artificially by the
116	! topography filtering.
117	!
118	! 4309 2019-11-26 18:49:59Z suehring
119	! Typo
120	!
121	! 4302 2019-11-22 13:15:56Z suehring
122	! Omit tall canopy mapped on top of buildings
123	!
124	! 4279 2019-10-29 08:48:17Z scharf
125	! unused variables removed
126	!
127	! 4258 2019-10-07 13:29:08Z scharf
128	! changed check for static driver and fixed bugs in initialization and header
129	!
130	! 4258 2019-10-07 13:29:08Z suehring
131	! Check if any LAD is prescribed when plant-canopy model is applied.
132	!
133	! 4226 2019-09-10 17:03:24Z suehring
134	! Bugfix, missing initialization of heating rate
135	!
136	! 4221 2019-09-09 08:50:35Z suehring
137	! Further bugfix in 3d data output for plant canopy
138	!
139	! 4216 2019-09-04 09:09:03Z suehring
140	! Bugfixes in 3d data output
141	!
142	! 4205 2019-08-30 13:25:00Z suehring
143	! Missing working precision + bugfix in calculation of wind speed
144	!
145	! 4188 2019-08-26 14:15:47Z suehring
146	! Minor adjustment in error number
147	!
148	! 4187 2019-08-26 12:43:15Z suehring
149	! Give specific error numbers instead of PA0999
150	!
151	! 4182 2019-08-22 15:20:23Z scharf
152	! Corrected "Former revisions" section
153	!
154	! 4168 2019-08-16 13:50:17Z suehring
155	! Replace function get_topography_top_index by topo_top_ind
156	!
157	! 4127 2019-07-30 14:47:10Z suehring
158	! Output of 3D plant canopy variables changed. It is now relative to the local
159	! terrain rather than located at the acutal vertical level in the model. This
160	! way, the vertical dimension of the output can be significantly reduced.
161	! (merge from branch resler)
162	!
163	! 3885 2019-04-11 11:29:34Z kanani
164	! Changes related to global restructuring of location messages and introduction
165	! of additional debug messages
166	!
167	! 3864 2019-04-05 09:01:56Z monakurppa
168	! unsed variables removed
169	!
170	! 3745 2019-02-15 18:57:56Z suehring
171	! Bugfix in transpiration, floating invalid when temperature
172	! becomes > 40 degrees
173	!
174	! 3744 2019-02-15 18:38:58Z suehring
175	! Some interface calls moved to module_interface + cleanup
176	!
177	! 3655 2019-01-07 16:51:22Z knoop
178	! unused variables removed
179	!
180	! 138 2007-11-28 10:03:58Z letzel
181	! Initial revision
182	!
183	! Description:
184	! ------------
185	!> 1) Initialization of the canopy model, e.g. construction of leaf area density
186	!> profile (subroutine pcm_init).
187	!> 2) Calculation of sinks and sources of momentum, heat and scalar concentration
188	!> due to canopy elements (subroutine pcm_tendency).
189	!
190	! @todo - precalculate constant terms in pcm_calc_transpiration_rate
191	! @todo - unify variable names (pcm_, pc_, ...)
192	! @todo - get rid-off dependency on radiation model
193	!------------------------------------------------------------------------------!
194	MODULE plant_canopy_model_mod
195
196	USE arrays_3d, &
197	ONLY: dzu, dzw, e, exner, hyp, pt, q, s, tend, u, v, w, zu, zw
198
199	USE basic_constants_and_equations_mod, &
200	ONLY: c_p, degc_to_k, l_v, lv_d_cp, r_d, rd_d_rv
201
202	USE bulk_cloud_model_mod, &
203	ONLY: bulk_cloud_model, microphysics_seifert
204
205	USE control_parameters, &
206	ONLY: average_count_3d, &
207	coupling_char, &
208	debug_output, &
209	dt_3d, &
210	dz, &
211	humidity, &
212	land_surface, &
213	length, &
214	message_string, &
215	ocean_mode, &
216	passive_scalar, &
217	plant_canopy, &
218	restart_data_format_output, &
219	restart_string, &
220	urban_surface
221
222	USE grid_variables, &
223	ONLY: dx, dy
224
225	USE indices, &
226	ONLY: nbgp, nxl, nxlg, nxlu, nxr, nxrg, nyn, nyng, nys, nysg, nysv, &
227	nz, nzb, nzt, topo_top_ind, wall_flags_total_0
228
229	USE kinds
230
231	USE netcdf_data_input_mod, &
232	ONLY: input_pids_static, &
233	char_fill, &
234	check_existence, &
235	close_input_file, &
236	get_attribute, &
237	get_dimension_length, &
238	get_variable, &
239	inquire_num_variables, &
240	inquire_variable_names, &
241	input_file_static, &
242	num_var_pids, &
243	open_read_file, &
244	pids_id, &
245	real_3d, &
246	vars_pids
247
248	USE pegrid
249
250	USE restart_data_mpi_io_mod, &
251	ONLY: rd_mpi_io_check_array, &
252	rrd_mpi_io, &
253	wrd_mpi_io
254
255	USE surface_mod, &
256	ONLY: surf_def_h, surf_lsm_h, surf_usm_h
257
258
259	IMPLICIT NONE
260
261	CHARACTER (LEN=30) :: canopy_mode = 'homogeneous' !< canopy coverage
262	LOGICAL :: plant_canopy_transpiration = .FALSE. !< flag to switch calculation of transpiration and corresponding latent heat
263	!< for resolved plant canopy inside radiation model
264	!< (calls subroutine pcm_calc_transpiration_rate from module plant_canopy_mod)
265
266	INTEGER(iwp) :: pch_index = 0 !< plant canopy height/top index
267	INTEGER(iwp) :: lad_vertical_gradient_level_ind(10) = -9999 !< lad-profile levels (index)
268
269	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: pch_index_ji !< local plant canopy top
270
271	LOGICAL :: calc_beta_lad_profile = .FALSE. !< switch for calc. of lad from beta func.
272
273	REAL(wp) :: alpha_lad = 9999999.9_wp !< coefficient for lad calculation
274	REAL(wp) :: beta_lad = 9999999.9_wp !< coefficient for lad calculation
275	REAL(wp) :: canopy_drag_coeff = 0.0_wp !< canopy drag coefficient (parameter)
276	REAL(wp) :: cthf = 0.0_wp !< canopy top heat flux
277	REAL(wp) :: dt_plant_canopy = 0.0_wp !< timestep account. for canopy drag
278	REAL(wp) :: ext_coef = 0.6_wp !< extinction coefficient
279	REAL(wp) :: lad_surface = 0.0_wp !< lad surface value
280	REAL(wp) :: lai_beta = 0.0_wp !< leaf area index (lai) for lad calc.
281	REAL(wp) :: leaf_scalar_exch_coeff = 0.0_wp !< canopy scalar exchange coeff.
282	REAL(wp) :: leaf_surface_conc = 0.0_wp !< leaf surface concentration
283
284	REAL(wp) :: lad_vertical_gradient(10) = 0.0_wp !< lad gradient
285	REAL(wp) :: lad_vertical_gradient_level(10) = -9999999.9_wp !< lad-prof. levels (in m)
286
287	REAL(wp) :: lad_type_coef(0:10) = 1.0_wp !< multiplicative coeficients for particular types
288	!< of plant canopy (e.g. deciduous tree during winter)
289
290	REAL(wp), DIMENSION(:), ALLOCATABLE :: lad !< leaf area density
291	REAL(wp), DIMENSION(:), ALLOCATABLE :: pre_lad !< preliminary lad
292
293	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: cum_lai_hf !< cumulative lai for heatflux calc.
294	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: lad_s !< lad on scalar-grid
295	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_heating_rate !< plant canopy heating rate
296	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_transpiration_rate !< plant canopy transpiration rate
297	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_latent_rate !< plant canopy latent heating rate
298
299	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_heatrate_av !< array for averaging plant canopy sensible heating rate
300	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_latentrate_av !< array for averaging plant canopy latent heating rate
301	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pcm_transpirationrate_av !< array for averaging plant canopy transpiration rate
302
303	TYPE(real_3d) :: basal_area_density_f !< input variable for basal area density - resolved vegetation
304	TYPE(real_3d) :: leaf_area_density_f !< input variable for leaf area density - resolved vegetation
305	TYPE(real_3d) :: root_area_density_lad_f !< input variable for root area density - resolved vegetation
306
307	SAVE
308
309	PRIVATE
310
311	!
312	!-- Public functions
313	PUBLIC pcm_calc_transpiration_rate, &
314	pcm_check_data_output, &
315	pcm_check_parameters, &
316	pcm_3d_data_averaging, &
317	pcm_data_output_3d, &
318	pcm_define_netcdf_grid, &
319	pcm_header, &
320	pcm_init, &
321	pcm_parin, &
322	pcm_rrd_global, &
323	pcm_rrd_local, &
324	pcm_tendency, &
325	pcm_wrd_global, &
326	pcm_wrd_local
327
328	!
329	!-- Public variables and constants
330	PUBLIC canopy_drag_coeff, pcm_heating_rate, pcm_transpiration_rate, &
331	pcm_latent_rate, canopy_mode, cthf, dt_plant_canopy, lad, lad_s, &
332	pch_index, plant_canopy_transpiration, &
333	pcm_heatrate_av, pcm_latentrate_av
334
335	INTERFACE pcm_calc_transpiration_rate
336	MODULE PROCEDURE pcm_calc_transpiration_rate
337	END INTERFACE pcm_calc_transpiration_rate
338
339	INTERFACE pcm_check_data_output
340	MODULE PROCEDURE pcm_check_data_output
341	END INTERFACE pcm_check_data_output
342
343	INTERFACE pcm_check_parameters
344	MODULE PROCEDURE pcm_check_parameters
345	END INTERFACE pcm_check_parameters
346
347	INTERFACE pcm_3d_data_averaging
348	MODULE PROCEDURE pcm_3d_data_averaging
349	END INTERFACE pcm_3d_data_averaging
350
351	INTERFACE pcm_data_output_3d
352	MODULE PROCEDURE pcm_data_output_3d
353	END INTERFACE pcm_data_output_3d
354
355	INTERFACE pcm_define_netcdf_grid
356	MODULE PROCEDURE pcm_define_netcdf_grid
357	END INTERFACE pcm_define_netcdf_grid
358
359	INTERFACE pcm_header
360	MODULE PROCEDURE pcm_header
361	END INTERFACE pcm_header
362
363	INTERFACE pcm_init
364	MODULE PROCEDURE pcm_init
365	END INTERFACE pcm_init
366
367	INTERFACE pcm_parin
368	MODULE PROCEDURE pcm_parin
369	END INTERFACE pcm_parin
370
371	INTERFACE pcm_read_plant_canopy_3d
372	MODULE PROCEDURE pcm_read_plant_canopy_3d
373	END INTERFACE pcm_read_plant_canopy_3d
374
375	INTERFACE pcm_rrd_local
376	MODULE PROCEDURE pcm_rrd_local_ftn
377	MODULE PROCEDURE pcm_rrd_local_mpi
378	END INTERFACE pcm_rrd_local
379
380	INTERFACE pcm_rrd_global
381	MODULE PROCEDURE pcm_rrd_global_ftn
382	MODULE PROCEDURE pcm_rrd_global_mpi
383	END INTERFACE pcm_rrd_global
384
385	INTERFACE pcm_tendency
386	MODULE PROCEDURE pcm_tendency
387	MODULE PROCEDURE pcm_tendency_ij
388	END INTERFACE pcm_tendency
389
390	INTERFACE pcm_wrd_local
391	MODULE PROCEDURE pcm_wrd_local
392	END INTERFACE pcm_wrd_local
393
394	INTERFACE pcm_wrd_global
395	MODULE PROCEDURE pcm_wrd_global
396	END INTERFACE pcm_wrd_global
397
398
399	CONTAINS
400
401
402	!------------------------------------------------------------------------------!
403	! Description:
404	! ------------
405	!> Calculation of the plant canopy transpiration rate based on the Jarvis-Stewart
406	!> with parametrizations described in Daudet et al. (1999; Agricult. and Forest
407	!> Meteorol. 97) and Ngao, Adam and Saudreau (2017; Agricult. and Forest Meteorol
408	!> 237-238). Model functions f1-f4 were adapted from Stewart (1998; Agric.
409	!> and Forest. Meteorol. 43) instead, because they are valid for broader intervals
410	!> of values. Funcion f4 used in form present in van Wijk et al. (1998;
411	!> Tree Physiology 20).
412	!>
413	!> This subroutine is called from subroutine radiation_interaction
414	!> after the calculation of radiation in plant canopy boxes.
415	!> (arrays pcbinsw and pcbinlw).
416	!>
417	!------------------------------------------------------------------------------!
418	SUBROUTINE pcm_calc_transpiration_rate(i, j, k, kk, pcbsw, pcblw, pcbtr, pcblh)
419
420	!
421	!-- input parameters
422	INTEGER(iwp), INTENT(IN) :: i, j, k, kk !< indices of the pc gridbox
423	REAL(wp), INTENT(IN) :: pcbsw !< sw radiation in gridbox (W)
424	REAL(wp), INTENT(IN) :: pcblw !< lw radiation in gridbox (W)
425	REAL(wp), INTENT(OUT) :: pcbtr !< transpiration rate dq/dt (kg/kg/s)
426	REAL(wp), INTENT(OUT) :: pcblh !< latent heat from transpiration dT/dt (K/s)
427
428	!-- variables and parameters for calculation of transpiration rate
429	REAL(wp) :: sat_press, sat_press_d, temp, v_lad
430	REAL(wp) :: d_fact, g_b, g_s, wind_speed, evapor_rate
431	REAL(wp) :: f1, f2, f3, f4, vpd, rswc, e_eq, e_imp, rad
432	REAL(wp), PARAMETER :: gama_psychr = 66.0_wp !< psychrometric constant (Pa/K)
433	REAL(wp), PARAMETER :: g_s_max = 0.01 !< maximum stomatal conductivity (m/s)
434	REAL(wp), PARAMETER :: m_soil = 0.4_wp !< soil water content (needs to adjust or take from LSM)
435	REAL(wp), PARAMETER :: m_wilt = 0.01_wp !< wilting point soil water content (needs to adjust or take from LSM)
436	REAL(wp), PARAMETER :: m_sat = 0.51_wp !< saturation soil water content (needs to adjust or take from LSM)
437	REAL(wp), PARAMETER :: t2_min = 0.0_wp !< minimal temperature for calculation of f2
438	REAL(wp), PARAMETER :: t2_max = 40.0_wp !< maximal temperature for calculation of f2
439
440
441	!-- Temperature (deg C)
442	temp = pt(k,j,i) * exner(k) - degc_to_k
443	!-- Coefficient for conversion of radiation to grid to radiation to unit leaves surface
444	v_lad = 1.0_wp / ( MAX( lad_s(kk,j,i), 1.0E-10_wp ) * dx * dy * dz(1) )
445	!-- Magnus formula for the saturation pressure (see Ngao, Adam and Saudreau (2017) eq. 1)
446	!-- There are updated formulas available, kept consistent with the rest of the parametrization
447	sat_press = 610.8_wp * exp(17.27_wp * temp/(temp + 237.3_wp))
448	!-- Saturation pressure derivative (derivative of the above)
449	sat_press_d = sat_press * 17.27_wp * 237.3_wp / (temp + 237.3_wp)**2
450	!-- Wind speed
451	wind_speed = SQRT( ( 0.5_wp * ( u(k,j,i) + u(k,j,i+1) ) )**2 + &
452	( 0.5_wp * ( v(k,j,i) + v(k,j+1,i) ) )**2 + &
453	( 0.5_wp * ( w(k,j,i) + w(k-1,j,i) ) )**2 )
454	!-- Aerodynamic conductivity (Daudet et al. (1999) eq. 14
455	g_b = 0.01_wp * wind_speed + 0.0071_wp
456	!-- Radiation flux per leaf surface unit
457	rad = pcbsw * v_lad
458	!-- First function for calculation of stomatal conductivity (radiation dependency)
459	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 17
460	f1 = rad * (1000.0_wp+42.1_wp) / 1000.0_wp / (rad+42.1_wp)
461	!-- Second function for calculation of stomatal conductivity (temperature dependency)
462	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 21
463	f2 = MAX(t2_min, (temp-t2_min) * MAX(0.0_wp,t2_max-temp)**((t2_max-16.9_wp)/(16.9_wp-t2_min)) / &
464	((16.9_wp-t2_min) * (t2_max-16.9_wp)**((t2_max-16.9_wp)/(16.9_wp-t2_min))) )
465	!-- Water pressure deficit
466	!-- Ngao, Adam and Saudreau (2017) eq. 6 but with water vapour partial pressure
467	vpd = max( sat_press - q(k,j,i) * hyp(k) / rd_d_rv, 0._wp )
468	!-- Third function for calculation of stomatal conductivity (water pressure deficit dependency)
469	!-- Ngao, Adam and Saudreau (2017) Table 1, limited from below according to Stewart (1988)
470	!-- The coefficients of the linear dependence should better correspond to broad-leaved trees
471	!-- than the coefficients from Stewart (1988) which correspond to conifer trees.
472	vpd = MIN(MAX(vpd,770.0_wp),3820.0_wp)
473	f3 = -2E-4_wp * vpd + 1.154_wp
474	!-- Fourth function for calculation of stomatal conductivity (soil moisture dependency)
475	!-- Residual soil water content
476	!-- van Wijk et al. (1998; Tree Physiology 20) eq. 7
477	!-- TODO - over LSM surface might be calculated from LSM parameters
478	rswc = ( m_sat - m_soil ) / ( m_sat - m_wilt )
479	!-- van Wijk et al. (1998; Tree Physiology 20) eq. 5-6 (it is a reformulation of eq. 22-23 of Stewart(1988))
480	f4 = MAX(0.0_wp, MIN(1.0_wp - 0.041_wp * EXP(3.2_wp * rswc), 1.0_wp - 0.041_wp))
481	!-- Stomatal conductivity
482	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 12
483	!-- (notation according to Ngao, Adam and Saudreau (2017) and others)
484	g_s = g_s_max * f1 * f2 * f3 * f4 + 1.0E-10_wp
485	!-- Decoupling factor
486	!-- Daudet et al. (1999) eq. 6
487	d_fact = (sat_press_d / gama_psychr + 2.0_wp ) / &
488	(sat_press_d / gama_psychr + 2.0_wp + 2.0_wp * g_b / g_s )
489	!-- Equilibrium evaporation rate
490	!-- Daudet et al. (1999) eq. 4
491	e_eq = (pcbsw + pcblw) * v_lad * sat_press_d / &
492	gama_psychr /( sat_press_d / gama_psychr + 2.0_wp ) / l_v
493	!-- Imposed evaporation rate
494	!-- Daudet et al. (1999) eq. 5
495	e_imp = r_d * pt(k,j,i) * exner(k) / hyp(k) * c_p * g_s * vpd / gama_psychr / l_v
496	!-- Evaporation rate
497	!-- Daudet et al. (1999) eq. 3
498	!-- (evaporation rate is limited to non-negative values)
499	evapor_rate = MAX(d_fact * e_eq + ( 1.0_wp - d_fact ) * e_imp, 0.0_wp)
500	!-- Conversion of evaporation rate to q tendency in gridbox
501	!-- dq/dt = E * LAD * V_g / (rho_air * V_g)
502	pcbtr = evapor_rate * r_d * pt(k,j,i) * exner(k) * lad_s(kk,j,i) / hyp(k) !-- = dq/dt
503	!-- latent heat from evaporation
504	pcblh = pcbtr * lv_d_cp !-- = - dT/dt
505
506	END SUBROUTINE pcm_calc_transpiration_rate
507
508
509	!------------------------------------------------------------------------------!
510	! Description:
511	! ------------
512	!> Check data output for plant canopy model
513	!------------------------------------------------------------------------------!
514	SUBROUTINE pcm_check_data_output( var, unit )
515
516	CHARACTER (LEN=*) :: unit !<
517	CHARACTER (LEN=*) :: var !<
518
519
520	SELECT CASE ( TRIM( var ) )
521
522	CASE ( 'pcm_heatrate' )
523	!
524	!-- Output of heatrate can be only done if it is explicitely set by cthf,
525	!-- or parametrized by absorption of radiation. The latter, however, is
526	!-- only available if radiation_interactions are on. Note, these are
527	!-- enabled if land-surface or urban-surface is switched-on. Using
528	!-- radiation_interactions_on directly is not possible since it belongs
529	!-- to the radition_model, which in turn depends on the plant-canopy model,
530	!-- creating circular dependencies.
531	IF ( cthf == 0.0_wp .AND. ( .NOT. urban_surface .AND. &
532	.NOT. land_surface ) ) THEN
533	message_string = 'output of "' // TRIM( var ) // '" requi' // &
534	'res setting of parameter cthf /= 0.0'
535	CALL message( 'pcm_check_data_output', 'PA0718', 1, 2, 0, 6, 0 )
536	ENDIF
537	unit = 'K s-1'
538
539	CASE ( 'pcm_transpirationrate' )
540	unit = 'kg kg-1 s-1'
541
542	CASE ( 'pcm_latentrate' )
543	unit = 'K s-1'
544
545	CASE ( 'pcm_lad' )
546	unit = 'm2 m-3'
547
548
549	CASE DEFAULT
550	unit = 'illegal'
551
552	END SELECT
553
554
555	END SUBROUTINE pcm_check_data_output
556
557
558	!------------------------------------------------------------------------------!
559	! Description:
560	! ------------
561	!> Check parameters routine for plant canopy model
562	!------------------------------------------------------------------------------!
563	SUBROUTINE pcm_check_parameters
564
565	IF ( ocean_mode ) THEN
566	message_string = 'plant_canopy = .TRUE. is not allowed in the '// &
567	'ocean'
568	CALL message( 'pcm_check_parameters', 'PA0696', 1, 2, 0, 6, 0 )
569	ENDIF
570
571	IF ( canopy_drag_coeff == 0.0_wp ) THEN
572	message_string = 'plant_canopy = .TRUE. requires a non-zero drag '// &
573	'coefficient & given value is canopy_drag_coeff = 0.0'
574	CALL message( 'pcm_check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
575	ENDIF
576
577	IF ( ( alpha_lad /= 9999999.9_wp .AND. beta_lad == 9999999.9_wp ) .OR.&
578	beta_lad /= 9999999.9_wp .AND. alpha_lad == 9999999.9_wp ) THEN
579	message_string = 'using the beta function for the construction ' // &
580	'of the leaf area density profile requires ' // &
581	'both alpha_lad and beta_lad to be /= 9999999.9'
582	CALL message( 'pcm_check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
583	ENDIF
584
585	IF ( calc_beta_lad_profile .AND. lai_beta == 0.0_wp ) THEN
586	message_string = 'using the beta function for the construction ' // &
587	'of the leaf area density profile requires ' // &
588	'a non-zero lai_beta, but given value is ' // &
589	'lai_beta = 0.0'
590	CALL message( 'pcm_check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
591	ENDIF
592
593	IF ( calc_beta_lad_profile .AND. lad_surface /= 0.0_wp ) THEN
594	message_string = 'simultaneous setting of alpha_lad /= 9999999.9 '// &
595	'combined with beta_lad /= 9999999.9 ' // &
596	'and lad_surface /= 0.0 is not possible, ' // &
597	'use either vertical gradients or the beta ' // &
598	'function for the construction of the leaf area '// &
599	'density profile'
600	CALL message( 'pcm_check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
601	ENDIF
602
603	IF ( bulk_cloud_model .AND. microphysics_seifert ) THEN
604	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
605	' seifert_beheng'
606	CALL message( 'pcm_check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
607	ENDIF
608
609	END SUBROUTINE pcm_check_parameters
610
611
612	!------------------------------------------------------------------------------!
613	!
614	! Description:
615	! ------------
616	!> Subroutine for averaging 3D data
617	!------------------------------------------------------------------------------!
618	SUBROUTINE pcm_3d_data_averaging( mode, variable )
619
620	CHARACTER (LEN=*) :: mode !<
621	CHARACTER (LEN=*) :: variable !<
622
623	INTEGER(iwp) :: i !<
624	INTEGER(iwp) :: j !<
625	INTEGER(iwp) :: k !<
626
627
628	IF ( mode == 'allocate' ) THEN
629
630	SELECT CASE ( TRIM( variable ) )
631
632	CASE ( 'pcm_heatrate' )
633	IF ( .NOT. ALLOCATED( pcm_heatrate_av ) ) THEN
634	ALLOCATE( pcm_heatrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
635	ENDIF
636	pcm_heatrate_av = 0.0_wp
637
638
639	CASE ( 'pcm_latentrate' )
640	IF ( .NOT. ALLOCATED( pcm_latentrate_av ) ) THEN
641	ALLOCATE( pcm_latentrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
642	ENDIF
643	pcm_latentrate_av = 0.0_wp
644
645
646	CASE ( 'pcm_transpirationrate' )
647	IF ( .NOT. ALLOCATED( pcm_transpirationrate_av ) ) THEN
648	ALLOCATE( pcm_transpirationrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
649	ENDIF
650	pcm_transpirationrate_av = 0.0_wp
651
652	CASE DEFAULT
653	CONTINUE
654
655	END SELECT
656
657	ELSEIF ( mode == 'sum' ) THEN
658
659	SELECT CASE ( TRIM( variable ) )
660
661	CASE ( 'pcm_heatrate' )
662	IF ( ALLOCATED( pcm_heatrate_av ) ) THEN
663	DO i = nxl, nxr
664	DO j = nys, nyn
665	IF ( pch_index_ji(j,i) /= 0 ) THEN
666	DO k = 0, pch_index_ji(j,i)
667	pcm_heatrate_av(k,j,i) = pcm_heatrate_av(k,j,i) + pcm_heating_rate(k,j,i)
668	ENDDO
669	ENDIF
670	ENDDO
671	ENDDO
672	ENDIF
673
674
675	CASE ( 'pcm_latentrate' )
676	IF ( ALLOCATED( pcm_latentrate_av ) ) THEN
677	DO i = nxl, nxr
678	DO j = nys, nyn
679	IF ( pch_index_ji(j,i) /= 0 ) THEN
680	DO k = 0, pch_index_ji(j,i)
681	pcm_latentrate_av(k,j,i) = pcm_latentrate_av(k,j,i) + pcm_latent_rate(k,j,i)
682	ENDDO
683	ENDIF
684	ENDDO
685	ENDDO
686	ENDIF
687
688
689	CASE ( 'pcm_transpirationrate' )
690	IF ( ALLOCATED( pcm_transpirationrate_av ) ) THEN
691	DO i = nxl, nxr
692	DO j = nys, nyn
693	IF ( pch_index_ji(j,i) /= 0 ) THEN
694	DO k = 0, pch_index_ji(j,i)
695	pcm_transpirationrate_av(k,j,i) = pcm_transpirationrate_av(k,j,i) + pcm_transpiration_rate(k,j,i)
696	ENDDO
697	ENDIF
698	ENDDO
699	ENDDO
700	ENDIF
701
702	CASE DEFAULT
703	CONTINUE
704
705	END SELECT
706
707	ELSEIF ( mode == 'average' ) THEN
708
709	SELECT CASE ( TRIM( variable ) )
710
711	CASE ( 'pcm_heatrate' )
712	IF ( ALLOCATED( pcm_heatrate_av ) ) THEN
713	DO i = nxlg, nxrg
714	DO j = nysg, nyng
715	IF ( pch_index_ji(j,i) /= 0 ) THEN
716	DO k = 0, pch_index_ji(j,i)
717	pcm_heatrate_av(k,j,i) = pcm_heatrate_av(k,j,i) &
718	/ REAL( average_count_3d, KIND=wp )
719	ENDDO
720	ENDIF
721	ENDDO
722	ENDDO
723	ENDIF
724
725
726	CASE ( 'pcm_latentrate' )
727	IF ( ALLOCATED( pcm_latentrate_av ) ) THEN
728	DO i = nxlg, nxrg
729	DO j = nysg, nyng
730	IF ( pch_index_ji(j,i) /= 0 ) THEN
731	DO k = 0, pch_index_ji(j,i)
732	pcm_latentrate_av(k,j,i) = pcm_latentrate_av(k,j,i) &
733	/ REAL( average_count_3d, KIND=wp )
734	ENDDO
735	ENDIF
736	ENDDO
737	ENDDO
738	ENDIF
739
740
741	CASE ( 'pcm_transpirationrate' )
742	IF ( ALLOCATED( pcm_transpirationrate_av ) ) THEN
743	DO i = nxlg, nxrg
744	DO j = nysg, nyng
745	IF ( pch_index_ji(j,i) /= 0 ) THEN
746	DO k = 0, pch_index_ji(j,i)
747	pcm_transpirationrate_av(k,j,i) = pcm_transpirationrate_av(k,j,i) &
748	/ REAL( average_count_3d, KIND=wp )
749	ENDDO
750	ENDIF
751	ENDDO
752	ENDDO
753	ENDIF
754
755	END SELECT
756
757	ENDIF
758
759	END SUBROUTINE pcm_3d_data_averaging
760
761	!------------------------------------------------------------------------------!
762	!
763	! Description:
764	! ------------
765	!> Subroutine defining 3D output variables.
766	!> Note, 3D plant-canopy output has it's own vertical output dimension, meaning
767	!> that 3D output is relative to the model surface now rather than at the actual
768	!> grid point where the plant canopy is located.
769	!------------------------------------------------------------------------------!
770	SUBROUTINE pcm_data_output_3d( av, variable, found, local_pf, fill_value, &
771	nzb_do, nzt_do )
772
773	CHARACTER (LEN=*) :: variable !< treated variable
774
775	INTEGER(iwp) :: av !< flag indicating instantaneous or averaged data output
776	INTEGER(iwp) :: i !< grid index x-direction
777	INTEGER(iwp) :: j !< grid index y-direction
778	INTEGER(iwp) :: k !< grid index z-direction
779	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
780	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
781
782	LOGICAL :: found !< flag indicating if variable is found
783
784	REAL(wp) :: fill_value !< fill value
785	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !< data output array
786
787
788	found = .TRUE.
789
790	local_pf = REAL( fill_value, KIND = 4 )
791
792	SELECT CASE ( TRIM( variable ) )
793	!
794	!-- Note, to save memory arrays for heating are allocated from 0:pch_index.
795	!-- Thus, output must be relative to these array indices. Further, check
796	!-- whether the output is within the vertical output range,
797	!-- i.e. nzb_do:nzt_do, which is necessary as local_pf is only allocated
798	!-- for this index space. Note, plant-canopy output has a separate
799	!-- vertical output coordinate zlad, so that output is mapped down to the
800	!-- surface.
801	CASE ( 'pcm_heatrate' )
802	IF ( av == 0 ) THEN
803	DO i = nxl, nxr
804	DO j = nys, nyn
805	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
806	local_pf(i,j,k) = pcm_heating_rate(k,j,i)
807	ENDDO
808	ENDDO
809	ENDDO
810	ELSE
811	DO i = nxl, nxr
812	DO j = nys, nyn
813	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
814	local_pf(i,j,k) = pcm_heatrate_av(k,j,i)
815	ENDDO
816	ENDDO
817	ENDDO
818	ENDIF
819
820	CASE ( 'pcm_latentrate' )
821	IF ( av == 0 ) THEN
822	DO i = nxl, nxr
823	DO j = nys, nyn
824	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
825	local_pf(i,j,k) = pcm_latent_rate(k,j,i)
826	ENDDO
827	ENDDO
828	ENDDO
829	ELSE
830	DO i = nxl, nxr
831	DO j = nys, nyn
832	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
833	local_pf(i,j,k) = pcm_latentrate_av(k,j,i)
834	ENDDO
835	ENDDO
836	ENDDO
837	ENDIF
838
839	CASE ( 'pcm_transpirationrate' )
840	IF ( av == 0 ) THEN
841	DO i = nxl, nxr
842	DO j = nys, nyn
843	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
844	local_pf(i,j,k) = pcm_transpiration_rate(k,j,i)
845	ENDDO
846	ENDDO
847	ENDDO
848	ELSE
849	DO i = nxl, nxr
850	DO j = nys, nyn
851	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
852	local_pf(i,j,k) = pcm_transpirationrate_av(k,j,i)
853	ENDDO
854	ENDDO
855	ENDDO
856	ENDIF
857
858	CASE ( 'pcm_lad' )
859	IF ( av == 0 ) THEN
860	DO i = nxl, nxr
861	DO j = nys, nyn
862	DO k = MAX( 1, nzb_do ), MIN( pch_index_ji(j,i), nzt_do )
863	local_pf(i,j,k) = lad_s(k,j,i)
864	ENDDO
865	ENDDO
866	ENDDO
867	ENDIF
868
869	CASE DEFAULT
870	found = .FALSE.
871
872	END SELECT
873
874	END SUBROUTINE pcm_data_output_3d
875
876	!------------------------------------------------------------------------------!
877	!
878	! Description:
879	! ------------
880	!> Subroutine defining appropriate grid for netcdf variables.
881	!> It is called from subroutine netcdf.
882	!------------------------------------------------------------------------------!
883	SUBROUTINE pcm_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
884
885	CHARACTER (LEN=*), INTENT(IN) :: var !<
886	LOGICAL, INTENT(OUT) :: found !<
887	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !<
888	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !<
889	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !<
890
891	found = .TRUE.
892
893	!
894	!-- Check for the grid. zpc is zu(nzb:nzb+pch_index)
895	SELECT CASE ( TRIM( var ) )
896
897	CASE ( 'pcm_heatrate', 'pcm_lad', 'pcm_transpirationrate', 'pcm_latentrate')
898	grid_x = 'x'
899	grid_y = 'y'
900	grid_z = 'zpc'
901
902	CASE DEFAULT
903	found = .FALSE.
904	grid_x = 'none'
905	grid_y = 'none'
906	grid_z = 'none'
907	END SELECT
908
909	END SUBROUTINE pcm_define_netcdf_grid
910
911
912	!------------------------------------------------------------------------------!
913	! Description:
914	! ------------
915	!> Header output for plant canopy model
916	!------------------------------------------------------------------------------!
917	SUBROUTINE pcm_header ( io )
918
919	CHARACTER (LEN=10) :: coor_chr !<
920
921	CHARACTER (LEN=86) :: coordinates !<
922	CHARACTER (LEN=86) :: gradients !<
923	CHARACTER (LEN=86) :: leaf_area_density !<
924	CHARACTER (LEN=86) :: slices !<
925
926	INTEGER(iwp) :: i !<
927	INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
928	INTEGER(iwp) :: k !<
929
930	REAL(wp) :: canopy_height !< canopy height (in m)
931
932	canopy_height = zw(pch_index)
933
934	WRITE ( io, 1 ) canopy_mode, canopy_height, pch_index, &
935	canopy_drag_coeff
936	IF ( passive_scalar ) THEN
937	WRITE ( io, 2 ) leaf_scalar_exch_coeff, &
938	leaf_surface_conc
939	ENDIF
940
941	!
942	! Heat flux at the top of vegetation
943	WRITE ( io, 3 ) cthf
944
945	!
946	! Leaf area density profile, calculated either from given vertical
947	! gradients or from beta probability density function.
948	IF ( .NOT. calc_beta_lad_profile ) THEN
949
950	! Building output strings, starting with surface value
951	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
952	gradients = '------'
953	slices = ' 0'
954	coordinates = ' 0.0'
955	DO i = 1, UBOUND(lad_vertical_gradient_level_ind, DIM=1)
956	IF ( lad_vertical_gradient_level_ind(i) /= -9999 ) THEN
957
958	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
959	leaf_area_density = TRIM( leaf_area_density ) // ' ' // TRIM( coor_chr )
960
961	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
962	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
963
964	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
965	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
966
967	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
968	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
969	ELSE
970	EXIT
971	ENDIF
972	ENDDO
973
974	WRITE ( io, 4 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
975	TRIM( gradients ), TRIM( slices )
976
977	ELSE
978
979	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
980	coordinates = ' 0.0'
981
982	DO k = 1, pch_index
983
984	WRITE (coor_chr,'(F7.2)') lad(k)
985	leaf_area_density = TRIM( leaf_area_density ) // ' ' // &
986	TRIM( coor_chr )
987
988	WRITE (coor_chr,'(F7.1)') zu(k)
989	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
990
991	ENDDO
992
993	WRITE ( io, 5 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
994	alpha_lad, beta_lad, lai_beta
995
996	ENDIF
997
998	1 FORMAT (//' Vegetation canopy (drag) model:'/ &
999	' ------------------------------'// &
1000	' Canopy mode: ', A / &
1001	' Canopy height: ',F6.2,'m (',I4,' grid points)' / &
1002	' Leaf drag coefficient: ',F6.2 /)
1003	2 FORMAT (/ ' Scalar exchange coefficient: ',F6.2 / &
1004	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1005	3 FORMAT (' Predefined constant heatflux at the top of the vegetation: ', &
1006	F6.2, ' K m/s')
1007	4 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1008	' Height: ',A,' m'/ &
1009	' Leaf area density: ',A,' m2/m3'/ &
1010	' Gradient: ',A,' m2/m4'/ &
1011	' Gridpoint: ',A)
1012	5 FORMAT (//' Characteristic levels of the leaf area density and coefficients:'&
1013	// ' Height: ',A,' m'/ &
1014	' Leaf area density: ',A,' m2/m3'/ &
1015	' Coefficient alpha: ',F6.2 / &
1016	' Coefficient beta: ',F6.2 / &
1017	' Leaf area index: ',F6.2,' m2/m2' /)
1018
1019	END SUBROUTINE pcm_header
1020
1021
1022	!------------------------------------------------------------------------------!
1023	! Description:
1024	! ------------
1025	!> Initialization of the plant canopy model
1026	!------------------------------------------------------------------------------!
1027	SUBROUTINE pcm_init
1028
1029	USE exchange_horiz_mod, &
1030	ONLY: exchange_horiz
1031
1032	INTEGER(iwp) :: i !< running index
1033	INTEGER(iwp) :: j !< running index
1034	INTEGER(iwp) :: k !< running index
1035	INTEGER(iwp) :: m !< running index
1036
1037	LOGICAL :: lad_on_top = .FALSE. !< dummy flag to indicate that LAD is defined on a building roof
1038
1039	REAL(wp) :: canopy_height !< canopy height for lad-profile construction
1040	REAL(wp) :: gradient !< gradient for lad-profile construction
1041	REAL(wp) :: int_bpdf !< vertical integral for lad-profile construction
1042	REAL(wp) :: lad_max !< maximum LAD value in the model domain, used to perform a check
1043
1044	IF ( debug_output ) CALL debug_message( 'pcm_init', 'start' )
1045	!
1046	!-- Allocate one-dimensional arrays for the computation of the
1047	!-- leaf area density (lad) profile
1048	ALLOCATE( lad(0:nz+1), pre_lad(0:nz+1) )
1049	lad = 0.0_wp
1050	pre_lad = 0.0_wp
1051
1052	!
1053	!-- Set flag that indicates that the lad-profile shall be calculated by using
1054	!-- a beta probability density function
1055	IF ( alpha_lad /= 9999999.9_wp .AND. beta_lad /= 9999999.9_wp ) THEN
1056	calc_beta_lad_profile = .TRUE.
1057	ENDIF
1058
1059
1060	!
1061	!-- Compute the profile of leaf area density used in the plant
1062	!-- canopy model. The profile can either be constructed from
1063	!-- prescribed vertical gradients of the leaf area density or by
1064	!-- using a beta probability density function (see e.g. Markkanen et al.,
1065	!-- 2003: Boundary-Layer Meteorology, 106, 437-459)
1066	IF ( .NOT. calc_beta_lad_profile ) THEN
1067
1068	!
1069	!-- Use vertical gradients for lad-profile construction
1070	i = 1
1071	gradient = 0.0_wp
1072
1073	lad(0) = lad_surface
1074	lad_vertical_gradient_level_ind(1) = 0
1075
1076	DO k = 1, pch_index
1077	IF ( i < 11 ) THEN
1078	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
1079	lad_vertical_gradient_level(i) >= 0.0_wp ) THEN
1080	gradient = lad_vertical_gradient(i)
1081	lad_vertical_gradient_level_ind(i) = k - 1
1082	i = i + 1
1083	ENDIF
1084	ENDIF
1085	IF ( gradient /= 0.0_wp ) THEN
1086	IF ( k /= 1 ) THEN
1087	lad(k) = lad(k-1) + dzu(k) * gradient
1088	ELSE
1089	lad(k) = lad_surface + dzu(k) * gradient
1090	ENDIF
1091	ELSE
1092	lad(k) = lad(k-1)
1093	ENDIF
1094	ENDDO
1095
1096	!
1097	!-- In case of no given leaf area density gradients, choose a vanishing
1098	!-- gradient. This information is used for the HEADER and the RUN_CONTROL
1099	!-- file.
1100	IF ( lad_vertical_gradient_level(1) == -9999999.9_wp ) THEN
1101	lad_vertical_gradient_level(1) = 0.0_wp
1102	ENDIF
1103
1104	ELSE
1105
1106	!
1107	!-- Use beta function for lad-profile construction
1108	int_bpdf = 0.0_wp
1109	canopy_height = zw(pch_index)
1110
1111	DO k = 0, pch_index
1112	int_bpdf = int_bpdf + &
1113	( ( ( zw(k) / canopy_height )*( alpha_lad-1.0_wp ) ) &
1114	( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
1115	beta_lad-1.0_wp ) ) &
1116	* ( ( zw(k+1)-zw(k) ) / canopy_height ) )
1117	ENDDO
1118
1119	!
1120	!-- Preliminary lad profile (defined on w-grid)
1121	DO k = 0, pch_index
1122	pre_lad(k) = lai_beta * &
1123	( ( ( zw(k) / canopy_height )**( alpha_lad-1.0_wp ) ) &
1124	* ( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
1125	beta_lad-1.0_wp ) ) / int_bpdf &
1126	) / canopy_height
1127	ENDDO
1128
1129	!
1130	!-- Final lad profile (defined on scalar-grid level, since most prognostic
1131	!-- quantities are defined there, hence, less interpolation is required
1132	!-- when calculating the canopy tendencies)
1133	lad(0) = pre_lad(0)
1134	DO k = 1, pch_index
1135	lad(k) = 0.5 * ( pre_lad(k-1) + pre_lad(k) )
1136	ENDDO
1137
1138	ENDIF
1139
1140	!
1141	!-- Allocate 3D-array for the leaf area density (lad_s).
1142	ALLOCATE( lad_s(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1143
1144	!
1145	!-- Initialization of the canopy coverage in the model domain:
1146	!-- Setting the parameter canopy_mode = 'homogeneous' initializes a canopy, which
1147	!-- fully covers the domain surface
1148	SELECT CASE ( TRIM( canopy_mode ) )
1149
1150	CASE( 'homogeneous' )
1151
1152	DO i = nxlg, nxrg
1153	DO j = nysg, nyng
1154	lad_s(:,j,i) = lad(:)
1155	ENDDO
1156	ENDDO
1157
1158	CASE ( 'read_from_file' )
1159	!
1160	!-- Read plant canopy
1161	IF ( input_pids_static ) THEN
1162	!
1163	!-- Open the static input file
1164	#if defined( __netcdf )
1165	CALL open_read_file( TRIM( input_file_static ) // &
1166	TRIM( coupling_char ), &
1167	pids_id )
1168
1169	CALL inquire_num_variables( pids_id, num_var_pids )
1170	!
1171	!-- Allocate memory to store variable names and read them
1172	ALLOCATE( vars_pids(1:num_var_pids) )
1173	CALL inquire_variable_names( pids_id, vars_pids )
1174	!
1175	!-- Read leaf area density - resolved vegetation
1176	IF ( check_existence( vars_pids, 'lad' ) ) THEN
1177	leaf_area_density_f%from_file = .TRUE.
1178	CALL get_attribute( pids_id, char_fill, &
1179	leaf_area_density_f%fill, &
1180	.FALSE., 'lad' )
1181	!
1182	!-- Inquire number of vertical vegetation layer
1183	CALL get_dimension_length( pids_id, &
1184	leaf_area_density_f%nz, &
1185	'zlad' )
1186	!
1187	!-- Allocate variable for leaf-area density
1188	ALLOCATE( leaf_area_density_f%var &
1189	(0:leaf_area_density_f%nz-1, &
1190	nys:nyn,nxl:nxr) )
1191
1192	CALL get_variable( pids_id, 'lad', leaf_area_density_f%var, &
1193	nxl, nxr, nys, nyn, &
1194	0, leaf_area_density_f%nz-1 )
1195
1196	ELSE
1197	leaf_area_density_f%from_file = .FALSE.
1198	ENDIF
1199	!
1200	!-- Read basal area density - resolved vegetation
1201	IF ( check_existence( vars_pids, 'bad' ) ) THEN
1202	basal_area_density_f%from_file = .TRUE.
1203	CALL get_attribute( pids_id, char_fill, &
1204	basal_area_density_f%fill, &
1205	.FALSE., 'bad' )
1206	!
1207	!-- Inquire number of vertical vegetation layer
1208	CALL get_dimension_length( pids_id, &
1209	basal_area_density_f%nz, &
1210	'zlad' )
1211	!
1212	!-- Allocate variable
1213	ALLOCATE( basal_area_density_f%var &
1214	(0:basal_area_density_f%nz-1, &
1215	nys:nyn,nxl:nxr) )
1216
1217	CALL get_variable( pids_id, 'bad', basal_area_density_f%var,&
1218	nxl, nxr, nys, nyn, &
1219	0, basal_area_density_f%nz-1 )
1220	ELSE
1221	basal_area_density_f%from_file = .FALSE.
1222	ENDIF
1223	!
1224	!-- Read root area density - resolved vegetation
1225	IF ( check_existence( vars_pids, 'root_area_dens_r' ) ) THEN
1226	root_area_density_lad_f%from_file = .TRUE.
1227	CALL get_attribute( pids_id, char_fill, &
1228	root_area_density_lad_f%fill, &
1229	.FALSE., 'root_area_dens_r' )
1230	!
1231	!-- Inquire number of vertical soil layers
1232	CALL get_dimension_length( pids_id, &
1233	root_area_density_lad_f%nz, &
1234	'zsoil' )
1235	!
1236	!-- Allocate variable
1237	ALLOCATE( root_area_density_lad_f%var &
1238	(0:root_area_density_lad_f%nz-1,&
1239	nys:nyn,nxl:nxr) )
1240
1241	CALL get_variable( pids_id, 'root_area_dens_r', &
1242	root_area_density_lad_f%var, &
1243	nxl, nxr, nys, nyn, &
1244	0, root_area_density_lad_f%nz-1 )
1245	ELSE
1246	root_area_density_lad_f%from_file = .FALSE.
1247	ENDIF
1248
1249	DEALLOCATE( vars_pids )
1250	!
1251	!-- Finally, close the input file and deallocate temporary array
1252	CALL close_input_file( pids_id )
1253	#endif
1254	ENDIF
1255
1256	!
1257	!-- Initialize LAD with data from file. If LAD is given in NetCDF file,
1258	!-- use these values, else take LAD profiles from ASCII file.
1259	!-- Please note, in NetCDF file LAD is only given up to the maximum
1260	!-- canopy top, indicated by leaf_area_density_f%nz.
1261	lad_s = 0.0_wp
1262	IF ( leaf_area_density_f%from_file ) THEN
1263	!
1264	!-- Set also pch_index, used to be the upper bound of the vertical
1265	!-- loops. Therefore, use the global top of the canopy layer.
1266	pch_index = leaf_area_density_f%nz - 1
1267
1268	DO i = nxl, nxr
1269	DO j = nys, nyn
1270	DO k = 0, leaf_area_density_f%nz - 1
1271	IF ( leaf_area_density_f%var(k,j,i) /= &
1272	leaf_area_density_f%fill ) &
1273	lad_s(k,j,i) = leaf_area_density_f%var(k,j,i)
1274	ENDDO
1275	!
1276	!-- Check if resolved vegetation is mapped onto buildings.
1277	!-- In general, this is allowed and also meaningful, e.g.
1278	!-- when trees carry across roofs. However, due to the
1279	!-- topography filtering, new building grid points can emerge
1280	!-- at location where also plant canopy is defined. As a
1281	!-- result, plant canopy is mapped on top of roofs, with
1282	!-- siginficant impact on the downstream flow field and the
1283	!-- nearby surface radiation. In order to avoid that
1284	!-- plant canopy is mistakenly mapped onto building roofs,
1285	!-- check for building grid points (bit 6) that emerge from
1286	!-- the filtering (bit 4) and set LAD to zero at these
1287	!-- artificially created building grid points. This case,
1288	!-- an informative message is given.
1289	IF ( ANY( lad_s(:,j,i) /= 0.0_wp ) .AND. &
1290	ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) ) .AND. &
1291	ANY( BTEST( wall_flags_total_0(:,j,i), 4 ) ) ) THEN
1292	lad_s(:,j,i) = 0.0_wp
1293	lad_on_top = .TRUE.
1294	ENDIF
1295	ENDDO
1296	ENDDO
1297	#if defined( __parallel )
1298	CALL MPI_ALLREDUCE( MPI_IN_PLACE, lad_on_top, 1, MPI_LOGICAL, &
1299	MPI_LOR, comm2d, ierr)
1300	#endif
1301	IF ( lad_on_top ) THEN
1302	WRITE( message_string, * ) &
1303	'Resolved plant-canopy is ' // &
1304	'defined on top of an artificially '// &
1305	'created building grid point(s) ' // &
1306	'(emerged from the filtering) - ' // &
1307	'LAD profile is omitted at this / ' // &
1308	'these grid point(s).'
1309	CALL message( 'pcm_init', 'PA0313', 0, 0, 0, 6, 0 )
1310	ENDIF
1311	CALL exchange_horiz( lad_s, nbgp )
1312	!
1313	! ASCII file
1314	!-- Initialize canopy parameters canopy_drag_coeff,
1315	!-- leaf_scalar_exch_coeff, leaf_surface_conc
1316	!-- from file which contains complete 3D data (separate vertical profiles for
1317	!-- each location).
1318	ELSE
1319	CALL pcm_read_plant_canopy_3d
1320	ENDIF
1321
1322	CASE DEFAULT
1323	!
1324	!-- The DEFAULT case is reached either if the parameter
1325	!-- canopy mode contains a wrong character string or if the
1326	!-- user has coded a special case in the user interface.
1327	!-- There, the subroutine user_init_plant_canopy checks
1328	!-- which of these two conditions applies.
1329	CALL user_init_plant_canopy
1330
1331	END SELECT
1332	!
1333	!-- Check that at least one grid point has an LAD /= 0, else this may
1334	!-- cause errors in the radiation model.
1335	lad_max = MAXVAL( lad_s )
1336	#if defined( __parallel )
1337	CALL MPI_ALLREDUCE( MPI_IN_PLACE, lad_max, 1, MPI_REAL, MPI_MAX, &
1338	comm2d, ierr)
1339	#endif
1340	IF ( lad_max <= 0.0_wp ) THEN
1341	message_string = 'Plant-canopy model is switched-on but no ' // &
1342	'plant canopy is present in the model domain.'
1343	CALL message( 'pcm_init', 'PA0685', 1, 2, 0, 6, 0 )
1344	ENDIF
1345
1346	!
1347	!-- Initialize 2D index array indicating canopy top index.
1348	ALLOCATE( pch_index_ji(nysg:nyng,nxlg:nxrg) )
1349	pch_index_ji = 0
1350
1351	DO i = nxlg, nxrg
1352	DO j = nysg, nyng
1353	DO k = 0, pch_index
1354	IF ( lad_s(k,j,i) /= 0 ) pch_index_ji(j,i) = k
1355	ENDDO
1356	!
1357	!-- Check whether topography and local vegetation on top exceed
1358	!-- height of the model domain.
1359	IF ( topo_top_ind(j,i,0) + pch_index_ji(j,i) >= nzt + 1 ) THEN
1360	message_string = 'Local vegetation height on top of ' // &
1361	'topography exceeds height of model domain.'
1362	CALL message( 'pcm_init', 'PA0674', 2, 2, myid, 6, 0 )
1363	ENDIF
1364
1365	ENDDO
1366	ENDDO
1367	!
1368	!-- Calculate global pch_index value (index of top of plant canopy from ground)
1369	pch_index = MAXVAL( pch_index_ji )
1370	!
1371	!-- Exchange pch_index from all processors
1372	#if defined( __parallel )
1373	CALL MPI_ALLREDUCE( MPI_IN_PLACE, pch_index, 1, MPI_INTEGER, &
1374	MPI_MAX, comm2d, ierr)
1375	#endif
1376	!
1377	!-- Allocation of arrays pcm_heating_rate, pcm_transpiration_rate and pcm_latent_rate
1378	ALLOCATE( pcm_heating_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1379	pcm_heating_rate = 0.0_wp
1380
1381	IF ( humidity ) THEN
1382	ALLOCATE( pcm_transpiration_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1383	pcm_transpiration_rate = 0.0_wp
1384	ALLOCATE( pcm_latent_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1385	pcm_latent_rate = 0.0_wp
1386	ENDIF
1387	!
1388	!-- Initialization of the canopy heat source distribution due to heating
1389	!-- of the canopy layers by incoming solar radiation, in case that a non-zero
1390	!-- value is set for the canopy top heat flux (cthf), which equals the
1391	!-- available net radiation at canopy top.
1392	!-- The heat source distribution is calculated by a decaying exponential
1393	!-- function of the downward cumulative leaf area index (cum_lai_hf),
1394	!-- assuming that the foliage inside the plant canopy is heated by solar
1395	!-- radiation penetrating the canopy layers according to the distribution
1396	!-- of net radiation as suggested by Brown & Covey (1966; Agric. Meteorol. 3,
1397	!-- 73â96). This approach has been applied e.g. by Shaw & Schumann (1992;
1398	!-- Bound.-Layer Meteorol. 61, 47â64).
1399	!-- When using the radiation_interactions, canopy heating (pcm_heating_rate)
1400	!-- and plant canopy transpiration (pcm_transpiration_rate, pcm_latent_rate)
1401	!-- are calculated in the RTM after the calculation of radiation.
1402	IF ( cthf /= 0.0_wp ) THEN
1403
1404	ALLOCATE( cum_lai_hf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1405	!
1406	!-- Piecewise calculation of the cumulative leaf area index by vertical
1407	!-- integration of the leaf area density
1408	cum_lai_hf(:,:,:) = 0.0_wp
1409	DO i = nxlg, nxrg
1410	DO j = nysg, nyng
1411	DO k = pch_index_ji(j,i)-1, 0, -1
1412	IF ( k == pch_index_ji(j,i)-1 ) THEN
1413	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
1414	( 0.5_wp * lad_s(k+1,j,i) * &
1415	( zw(k+1) - zu(k+1) ) ) + &
1416	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
1417	lad_s(k,j,i) ) + &
1418	lad_s(k+1,j,i) ) * &
1419	( zu(k+1) - zw(k) ) )
1420	ELSE
1421	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
1422	( 0.5_wp * ( 0.5_wp * ( lad_s(k+2,j,i) + &
1423	lad_s(k+1,j,i) ) + &
1424	lad_s(k+1,j,i) ) * &
1425	( zw(k+1) - zu(k+1) ) ) + &
1426	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
1427	lad_s(k,j,i) ) + &
1428	lad_s(k+1,j,i) ) * &
1429	( zu(k+1) - zw(k) ) )
1430	ENDIF
1431	ENDDO
1432	ENDDO
1433	ENDDO
1434
1435	!
1436	!-- In areas with canopy the surface value of the canopy heat
1437	!-- flux distribution overrides the surface heat flux (shf)
1438	!-- Start with default surface type
1439	DO m = 1, surf_def_h(0)%ns
1440	i = surf_def_h(0)%i(m)
1441	j = surf_def_h(0)%j(m)
1442	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1443	surf_def_h(0)%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1444	ENDDO
1445	!
1446	!-- Natural surfaces
1447	DO m = 1, surf_lsm_h(0)%ns
1448	i = surf_lsm_h(0)%i(m)
1449	j = surf_lsm_h(0)%j(m)
1450	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1451	surf_lsm_h(0)%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1452	ENDDO
1453	!
1454	!-- Urban surfaces
1455	DO m = 1, surf_usm_h(0)%ns
1456	i = surf_usm_h(0)%i(m)
1457	j = surf_usm_h(0)%j(m)
1458	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1459	surf_usm_h(0)%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1460	ENDDO
1461	!
1462	!
1463	!-- Calculation of the heating rate (K/s) within the different layers of
1464	!-- the plant canopy. Calculation is only necessary in areas covered with
1465	!-- canopy.
1466	!-- Within the different canopy layers the plant-canopy heating
1467	!-- rate (pcm_heating_rate) is calculated as the vertical
1468	!-- divergence of the canopy heat fluxes at the top and bottom
1469	!-- of the respective layer
1470	DO i = nxlg, nxrg
1471	DO j = nysg, nyng
1472	DO k = 1, pch_index_ji(j,i)
1473	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) THEN
1474	pcm_heating_rate(k,j,i) = cthf * &
1475	( exp(-ext_coef*cum_lai_hf(k,j,i)) - &
1476	exp(-ext_coef*cum_lai_hf(k-1,j,i) ) ) / dzw(k)
1477	ENDIF
1478	ENDDO
1479	ENDDO
1480	ENDDO
1481
1482	ENDIF
1483
1484	IF ( debug_output ) CALL debug_message( 'pcm_init', 'end' )
1485
1486	END SUBROUTINE pcm_init
1487
1488
1489	!------------------------------------------------------------------------------!
1490	! Description:
1491	! ------------
1492	!> Parin for &plant_canopy_parameters for plant canopy model
1493	!------------------------------------------------------------------------------!
1494	SUBROUTINE pcm_parin
1495
1496	CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file
1497
1498	NAMELIST /plant_canopy_parameters/ &
1499	alpha_lad, beta_lad, canopy_drag_coeff, &
1500	canopy_mode, cthf, &
1501	lad_surface, lad_type_coef, &
1502	lad_vertical_gradient, &
1503	lad_vertical_gradient_level, &
1504	lai_beta, &
1505	leaf_scalar_exch_coeff, &
1506	leaf_surface_conc, pch_index, &
1507	plant_canopy_transpiration
1508
1509	NAMELIST /canopy_par/ alpha_lad, beta_lad, canopy_drag_coeff, &
1510	canopy_mode, cthf, &
1511	lad_surface, lad_type_coef, &
1512	lad_vertical_gradient, &
1513	lad_vertical_gradient_level, &
1514	lai_beta, &
1515	leaf_scalar_exch_coeff, &
1516	leaf_surface_conc, pch_index, &
1517	plant_canopy_transpiration
1518
1519	line = ' '
1520
1521	!
1522	!-- Try to find plant-canopy model package
1523	REWIND ( 11 )
1524	line = ' '
1525	DO WHILE ( INDEX( line, '&plant_canopy_parameters' ) == 0 )
1526	READ ( 11, '(A)', END=12 ) line
1527	ENDDO
1528	BACKSPACE ( 11 )
1529
1530	!
1531	!-- Read user-defined namelist
1532	READ ( 11, plant_canopy_parameters, ERR = 10 )
1533
1534	!
1535	!-- Set flag that indicates that the plant-canopy model is switched on
1536	plant_canopy = .TRUE.
1537
1538	GOTO 14
1539
1540	10 BACKSPACE( 11 )
1541	READ( 11 , '(A)') line
1542	CALL parin_fail_message( 'plant_canopy_parameters', line )
1543	!
1544	!-- Try to find old namelist
1545	12 REWIND ( 11 )
1546	line = ' '
1547	DO WHILE ( INDEX( line, '&canopy_par' ) == 0 )
1548	READ ( 11, '(A)', END=14 ) line
1549	ENDDO
1550	BACKSPACE ( 11 )
1551
1552	!
1553	!-- Read user-defined namelist
1554	READ ( 11, canopy_par, ERR = 13, END = 14 )
1555
1556	message_string = 'namelist canopy_par is deprecated and will be ' // &
1557	'removed in near future. Please use namelist ' // &
1558	'plant_canopy_parameters instead'
1559	CALL message( 'pcm_parin', 'PA0487', 0, 1, 0, 6, 0 )
1560
1561	!
1562	!-- Set flag that indicates that the plant-canopy model is switched on
1563	plant_canopy = .TRUE.
1564
1565	GOTO 14
1566
1567	13 BACKSPACE( 11 )
1568	READ( 11 , '(A)') line
1569	CALL parin_fail_message( 'canopy_par', line )
1570
1571	14 CONTINUE
1572
1573	END SUBROUTINE pcm_parin
1574
1575
1576	!------------------------------------------------------------------------------!
1577	! Description:
1578	! ------------
1579	!
1580	!> Loads 3D plant canopy data from file. File format is as follows:
1581	!>
1582	!> num_levels
1583	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1584	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1585	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1586	!> ...
1587	!>
1588	!> i.e. first line determines number of levels and further lines represent plant
1589	!> canopy data, one line per column and variable. In each data line,
1590	!> dtype represents variable to be set:
1591	!>
1592	!> dtype=1: leaf area density (lad_s)
1593	!> dtype=2....n: some additional plant canopy input data quantity
1594	!>
1595	!> Zeros are added automatically above num_levels until top of domain. Any
1596	!> non-specified (x,y) columns have zero values as default.
1597	!------------------------------------------------------------------------------!
1598	SUBROUTINE pcm_read_plant_canopy_3d
1599
1600	USE exchange_horiz_mod, &
1601	ONLY: exchange_horiz
1602
1603	INTEGER(iwp) :: dtype !< type of input data (1=lad)
1604	INTEGER(iwp) :: pctype !< type of plant canopy (deciduous,non-deciduous,...)
1605	INTEGER(iwp) :: i, j !< running index
1606	INTEGER(iwp) :: nzp !< number of vertical layers of plant canopy
1607	INTEGER(iwp) :: nzpltop !<
1608	INTEGER(iwp) :: nzpl !<
1609	INTEGER(iwp) :: kk !<
1610
1611	REAL(wp), DIMENSION(:), ALLOCATABLE :: col !< vertical column of input data
1612
1613	!
1614	!-- Initialize lad_s array
1615	lad_s = 0.0_wp
1616
1617	!
1618	!-- Open and read plant canopy input data
1619	OPEN(152, FILE='PLANT_CANOPY_DATA_3D' // TRIM( coupling_char ), &
1620	ACCESS='SEQUENTIAL', ACTION='READ', STATUS='OLD', &
1621	FORM='FORMATTED', ERR=515)
1622	READ(152, *, ERR=516, END=517) nzp !< read first line = number of vertical layers
1623	nzpltop = MIN(nzt+1, nzb+nzp-1)
1624	nzpl = nzpltop - nzb + 1 !< no. of layers to assign
1625	ALLOCATE( col(0:nzp-1) )
1626
1627	DO
1628	READ(152, *, ERR=516, END=517) dtype, i, j, pctype, col(:)
1629	IF ( i < nxlg .OR. i > nxrg .OR. j < nysg .OR. j > nyng ) CYCLE
1630
1631	SELECT CASE (dtype)
1632	CASE( 1 ) !< leaf area density
1633	!
1634	!-- This is just the pure canopy layer assumed to be grounded to
1635	!-- a flat domain surface. At locations where plant canopy sits
1636	!-- on top of any kind of topography, the vertical plant column
1637	!-- must be "lifted", which is done in SUBROUTINE pcm_tendency.
1638	IF ( pctype < 0 .OR. pctype > 10 ) THEN !< incorrect plant canopy type
1639	WRITE( message_string, * ) 'Incorrect type of plant canopy. ' // &
1640	'Allowed values 0 <= pctype <= 10, ' // &
1641	'but pctype is ', pctype
1642	CALL message( 'pcm_read_plant_canopy_3d', 'PA0349', 1, 2, 0, 6, 0 )
1643	ENDIF
1644	kk = topo_top_ind(j,i,0)
1645	lad_s(nzb:nzpltop-kk, j, i) = col(kk:nzpl-1)*lad_type_coef(pctype)
1646	CASE DEFAULT
1647	WRITE(message_string, '(a,i2,a)') &
1648	'Unknown record type in file PLANT_CANOPY_DATA_3D: "', dtype, '"'
1649	CALL message( 'pcm_read_plant_canopy_3d', 'PA0530', 1, 2, 0, 6, 0 )
1650	END SELECT
1651	ENDDO
1652
1653	515 message_string = 'error opening file PLANT_CANOPY_DATA_3D'
1654	CALL message( 'pcm_read_plant_canopy_3d', 'PA0531', 1, 2, 0, 6, 0 )
1655
1656	516 message_string = 'error reading file PLANT_CANOPY_DATA_3D'
1657	CALL message( 'pcm_read_plant_canopy_3d', 'PA0532', 1, 2, 0, 6, 0 )
1658
1659	517 CLOSE(152)
1660	DEALLOCATE( col )
1661
1662	CALL exchange_horiz( lad_s, nbgp )
1663
1664	END SUBROUTINE pcm_read_plant_canopy_3d
1665
1666	!------------------------------------------------------------------------------!
1667	! Description:
1668	! ------------
1669	!> Read module-specific global restart data (Fortran binary format).
1670	!------------------------------------------------------------------------------!
1671	SUBROUTINE pcm_rrd_global_ftn( found )
1672
1673	LOGICAL, INTENT(OUT) :: found
1674
1675	found = .TRUE.
1676
1677	SELECT CASE ( restart_string(1:length) )
1678
1679	CASE ( 'pch_index' )
1680	READ ( 13 ) pch_index
1681
1682	CASE DEFAULT
1683
1684	found = .FALSE.
1685
1686	END SELECT
1687
1688	END SUBROUTINE pcm_rrd_global_ftn
1689
1690	!------------------------------------------------------------------------------!
1691	! Description:
1692	! ------------
1693	!> Read module-specific global restart data (MPI-IO).
1694	!------------------------------------------------------------------------------!
1695	SUBROUTINE pcm_rrd_global_mpi
1696
1697	CALL rrd_mpi_io( 'pch_index', pch_index )
1698
1699	END SUBROUTINE pcm_rrd_global_mpi
1700
1701
1702	!------------------------------------------------------------------------------!
1703	! Description:
1704	! ------------
1705	!> Read module-specific local restart data arrays (Fortran binary format).
1706	!------------------------------------------------------------------------------!
1707	SUBROUTINE pcm_rrd_local_ftn( k, nxlf, nxlc, nxl_on_file, nxrf, nxrc, &
1708	nxr_on_file, nynf, nync, nyn_on_file, nysf, &
1709	nysc, nys_on_file, found )
1710
1711	INTEGER(iwp) :: k !<
1712	INTEGER(iwp) :: nxlc !<
1713	INTEGER(iwp) :: nxlf !<
1714	INTEGER(iwp) :: nxl_on_file !<
1715	INTEGER(iwp) :: nxrc !<
1716	INTEGER(iwp) :: nxrf !<
1717	INTEGER(iwp) :: nxr_on_file !<
1718	INTEGER(iwp) :: nync !<
1719	INTEGER(iwp) :: nynf !<
1720	INTEGER(iwp) :: nyn_on_file !<
1721	INTEGER(iwp) :: nysc !<
1722	INTEGER(iwp) :: nysf !<
1723	INTEGER(iwp) :: nys_on_file !<
1724
1725	LOGICAL, INTENT(OUT) :: found
1726
1727	REAL(wp), DIMENSION(0:pch_index, &
1728	nys_on_file-nbgp:nyn_on_file+nbgp, &
1729	nxl_on_file-nbgp:nxr_on_file+nbgp) :: tmp_3d2 !< temporary 3D array for entire vertical
1730	!< extension of canopy layer
1731	found = .TRUE.
1732
1733	SELECT CASE ( restart_string(1:length) )
1734
1735	CASE ( 'pcm_heatrate_av' )
1736	IF ( .NOT. ALLOCATED( pcm_heatrate_av ) ) THEN
1737	ALLOCATE( pcm_heatrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
1738	pcm_heatrate_av = 0.0_wp
1739	ENDIF
1740	IF ( k == 1 ) READ ( 13 ) tmp_3d2
1741	pcm_heatrate_av(0:pch_index,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
1742	tmp_3d2(0:pch_index,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
1743
1744	CASE ( 'pcm_latentrate_av' )
1745	IF ( .NOT. ALLOCATED( pcm_latentrate_av ) ) THEN
1746	ALLOCATE( pcm_latentrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
1747	pcm_latentrate_av = 0.0_wp
1748	ENDIF
1749	IF ( k == 1 ) READ ( 13 ) tmp_3d2
1750	pcm_latentrate_av(0:pch_index,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
1751	tmp_3d2(0:pch_index,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
1752
1753	CASE ( 'pcm_transpirationrate_av' )
1754	IF ( .NOT. ALLOCATED( pcm_transpirationrate_av ) ) THEN
1755	ALLOCATE( pcm_transpirationrate_av(0:pch_index,nysg:nyng,nxlg:nxrg) )
1756	pcm_transpirationrate_av = 0.0_wp
1757	ENDIF
1758	IF ( k == 1 ) READ ( 13 ) tmp_3d2
1759	pcm_transpirationrate_av(0:pch_index,nysc-nbgp:nync+nbgp,nxlc-nbgp:nxrc+nbgp) = &
1760	tmp_3d2(0:pch_index,nysf-nbgp:nynf+nbgp,nxlf-nbgp:nxrf+nbgp)
1761
1762	CASE DEFAULT
1763
1764	found = .FALSE.
1765
1766	END SELECT
1767
1768	END SUBROUTINE pcm_rrd_local_ftn
1769
1770
1771	!------------------------------------------------------------------------------!
1772	! Description:
1773	! ------------
1774	!> Read module-specific local restart data arrays (MPI-IO).
1775	!------------------------------------------------------------------------------!
1776	SUBROUTINE pcm_rrd_local_mpi
1777
1778	IMPLICIT NONE
1779
1780	LOGICAL :: array_found !<
1781
1782	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tmp_3d !< temporary array to store pcm data with
1783	!< non-standard vertical index bounds
1784
1785	!
1786	!-- Plant canopy arrays have non standard reduced vertical index bounds. They are stored with
1787	!-- full vertical bounds (bzb:nzt+1) in the restart file and must be re-stored after reading.
1788	CALL rd_mpi_io_check_array( 'pcm_heatrate_av' , found = array_found )
1789	IF ( array_found ) THEN
1790	IF ( .NOT. ALLOCATED( pcm_heatrate_av ) ) THEN
1791	ALLOCATE( pcm_heatrate_av(nzb:pch_index,nysg:nyng,nxlg:nxrg) )
1792	ENDIF
1793	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1794	CALL rrd_mpi_io( 'pcm_heatrate_av', tmp_3d )
1795	pcm_heatrate_av = tmp_3d(nzb:pch_index,:,:)
1796	DEALLOCATE( tmp_3d )
1797	ENDIF
1798
1799	CALL rd_mpi_io_check_array( 'pcm_latentrate_av' , found = array_found )
1800	IF ( array_found ) THEN
1801	IF ( .NOT. ALLOCATED( pcm_latentrate_av ) ) THEN
1802	ALLOCATE( pcm_latentrate_av(nzb:pch_index,nysg:nyng,nxlg:nxrg) )
1803	ENDIF
1804	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1805	CALL rrd_mpi_io( 'pcm_latentrate_av', tmp_3d )
1806	pcm_latentrate_av = tmp_3d(nzb:pch_index,:,:)
1807	DEALLOCATE( tmp_3d )
1808	ENDIF
1809
1810	CALL rd_mpi_io_check_array( 'pcm_transpirationrate_av' , found = array_found )
1811	IF ( array_found ) THEN
1812	IF ( .NOT. ALLOCATED( pcm_transpirationrate_av ) ) THEN
1813	ALLOCATE( pcm_transpirationrate_av(nzb:pch_index,nysg:nyng,nxlg:nxrg) )
1814	ENDIF
1815	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1816	CALL rrd_mpi_io( 'pcm_transpirationrate_av', tmp_3d )
1817	pcm_transpirationrate_av = tmp_3d(nzb:pch_index,:,:)
1818	DEALLOCATE( tmp_3d )
1819	ENDIF
1820
1821	END SUBROUTINE pcm_rrd_local_mpi
1822
1823
1824	!------------------------------------------------------------------------------!
1825	! Description:
1826	! ------------
1827	!> Calculation of the tendency terms, accounting for the effect of the plant
1828	!> canopy on momentum and scalar quantities.
1829	!>
1830	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
1831	!> (defined on scalar grid), as initialized in subroutine pcm_init.
1832	!> The lad on the w-grid is vertically interpolated from the surrounding
1833	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
1834	!> k = pch_index. Here, the lad is zero.
1835	!>
1836	!> The canopy drag must be limited (previously accounted for by calculation of
1837	!> a limiting canopy timestep for the determination of the maximum LES timestep
1838	!> in subroutine timestep), since it is physically impossible that the canopy
1839	!> drag alone can locally change the sign of a velocity component. This
1840	!> limitation is realized by calculating preliminary tendencies and velocities.
1841	!> It is subsequently checked if the preliminary new velocity has a different
1842	!> sign than the current velocity. If so, the tendency is limited in a way that
1843	!> the velocity can at maximum be reduced to zero by the canopy drag.
1844	!>
1845	!>
1846	!> Call for all grid points
1847	!------------------------------------------------------------------------------!
1848	SUBROUTINE pcm_tendency( component )
1849
1850	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
1851	INTEGER(iwp) :: i !< running index
1852	INTEGER(iwp) :: j !< running index
1853	INTEGER(iwp) :: k !< running index
1854	INTEGER(iwp) :: kk !< running index for flat lad arrays
1855
1856	LOGICAL :: building_edge_e !< control flag indicating an eastward-facing building edge
1857	LOGICAL :: building_edge_n !< control flag indicating a north-facing building edge
1858	LOGICAL :: building_edge_s !< control flag indicating a south-facing building edge
1859	LOGICAL :: building_edge_w !< control flag indicating a westward-facing building edge
1860
1861	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
1862	REAL(wp) :: lad_local !< local lad value
1863	REAL(wp) :: pre_tend !< preliminary tendency
1864	REAL(wp) :: pre_u !< preliminary u-value
1865	REAL(wp) :: pre_v !< preliminary v-value
1866	REAL(wp) :: pre_w !< preliminary w-value
1867
1868
1869	ddt_3d = 1.0_wp / dt_3d
1870
1871	!
1872	!-- Compute drag for the three velocity components and the SGS-TKE:
1873	SELECT CASE ( component )
1874
1875	!
1876	!-- u-component
1877	CASE ( 1 )
1878	DO i = nxlu, nxr
1879	DO j = nys, nyn
1880	!
1881	!-- Set control flags indicating east- and westward-orientated
1882	!-- building edges. Note, building_egde_w is set from the perspective
1883	!-- of the potential rooftop grid point, while building_edge_e is
1884	!-- is set from the perspective of the non-building grid point.
1885	building_edge_w = ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )&
1886	.AND. .NOT. ANY( BTEST( wall_flags_total_0(:,j,i-1), 6 ) )
1887	building_edge_e = ANY( BTEST( wall_flags_total_0(:,j,i-1), 6 ) )&
1888	.AND. .NOT. ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )
1889	!
1890	!-- Determine topography-top index on u-grid
1891	DO k = topo_top_ind(j,i,1)+1, topo_top_ind(j,i,1) + pch_index_ji(j,i)
1892
1893	kk = k - topo_top_ind(j,i,1) !- lad arrays are defined flat
1894	!
1895	!-- In order to create sharp boundaries of the plant canopy,
1896	!-- the lad on the u-grid at index (k,j,i) is equal to lad_s(k,j,i),
1897	!-- rather than being interpolated from the surrounding lad_s,
1898	!-- because this would yield smaller lad at the canopy boundaries
1899	!-- than inside of the canopy.
1900	!-- For the same reason, the lad at the rightmost(i+1)canopy
1901	!-- boundary on the u-grid equals lad_s(k,j,i), which is considered
1902	!-- in the next if-statement. Note, at left-sided building edges
1903	!-- this is not applied, here the LAD is equals the LAD at grid
1904	!-- point (k,j,i), in order to avoid that LAD is mistakenly mapped
1905	!-- on top of a roof where (usually) is no LAD is defined.
1906	lad_local = lad_s(kk,j,i)
1907	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp &
1908	.AND. .NOT. building_edge_w ) lad_local = lad_s(kk,j,i-1)
1909	!
1910	!-- In order to avoid that LAD is mistakenly considered at right-
1911	!-- sided building edges (here the topography-top index for the
1912	!-- u-component at index j,i is still on the building while the
1913	!-- topography top for the scalar isn't), LAD is taken from grid
1914	!-- point (j,i-1).
1915	IF ( lad_local > 0.0_wp .AND. lad_s(kk,j,i-1) == 0.0_wp &
1916	.AND. building_edge_e ) lad_local = lad_s(kk,j,i-1)
1917
1918	pre_tend = 0.0_wp
1919	pre_u = 0.0_wp
1920	!
1921	!-- Calculate preliminary value (pre_tend) of the tendency
1922	pre_tend = - canopy_drag_coeff * &
1923	lad_local * &
1924	SQRT( u(k,j,i)**2 + &
1925	( 0.25_wp * ( v(k,j,i-1) + &
1926	v(k,j,i) + &
1927	v(k,j+1,i) + &
1928	v(k,j+1,i-1) ) &
1929	)**2 + &
1930	( 0.25_wp * ( w(k-1,j,i-1) + &
1931	w(k-1,j,i) + &
1932	w(k,j,i-1) + &
1933	w(k,j,i) ) &
1934	)**2 &
1935	) * &
1936	u(k,j,i)
1937
1938	!
1939	!-- Calculate preliminary new velocity, based on pre_tend
1940	pre_u = u(k,j,i) + dt_3d * pre_tend
1941	!
1942	!-- Compare sign of old velocity and new preliminary velocity,
1943	!-- and in case the signs are different, limit the tendency
1944	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
1945	pre_tend = - u(k,j,i) * ddt_3d
1946	ENDIF
1947	!
1948	!-- Calculate final tendency
1949	tend(k,j,i) = tend(k,j,i) + pre_tend
1950
1951	ENDDO
1952	ENDDO
1953	ENDDO
1954
1955	!
1956	!-- v-component
1957	CASE ( 2 )
1958	DO i = nxl, nxr
1959	DO j = nysv, nyn
1960	!
1961	!-- Set control flags indicating north- and southward-orientated
1962	!-- building edges. Note, building_egde_s is set from the perspective
1963	!-- of the potential rooftop grid point, while building_edge_n is
1964	!-- is set from the perspective of the non-building grid point.
1965	building_edge_s = ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )&
1966	.AND. .NOT. ANY( BTEST( wall_flags_total_0(:,j-1,i), 6 ) )
1967	building_edge_n = ANY( BTEST( wall_flags_total_0(:,j-1,i), 6 ) )&
1968	.AND. .NOT. ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )
1969	!
1970	!-- Determine topography-top index on v-grid
1971	DO k = topo_top_ind(j,i,2)+1, topo_top_ind(j,i,2) + pch_index_ji(j,i)
1972
1973	kk = k - topo_top_ind(j,i,2) !- lad arrays are defined flat
1974	!
1975	!-- In order to create sharp boundaries of the plant canopy,
1976	!-- the lad on the v-grid at index (k,j,i) is equal to lad_s(k,j,i),
1977	!-- rather than being interpolated from the surrounding lad_s,
1978	!-- because this would yield smaller lad at the canopy boundaries
1979	!-- than inside of the canopy.
1980	!-- For the same reason, the lad at the northmost(j+1)canopy
1981	!-- boundary on the v-grid equals lad_s(k,j,i), which is considered
1982	!-- in the next if-statement. Note, at left-sided building edges
1983	!-- this is not applied, here the LAD is equals the LAD at grid
1984	!-- point (k,j,i), in order to avoid that LAD is mistakenly mapped
1985	!-- on top of a roof where (usually) is no LAD is defined.
1986	lad_local = lad_s(kk,j,i)
1987	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp &
1988	.AND. .NOT. building_edge_s ) lad_local = lad_s(kk,j-1,i)
1989	!
1990	!-- In order to avoid that LAD is mistakenly considered at right-
1991	!-- sided building edges (here the topography-top index for the
1992	!-- u-component at index j,i is still on the building while the
1993	!-- topography top for the scalar isn't), LAD is taken from grid
1994	!-- point (j,i-1).
1995	IF ( lad_local > 0.0_wp .AND. lad_s(kk,j-1,i) == 0.0_wp &
1996	.AND. building_edge_n ) lad_local = lad_s(kk,j-1,i)
1997
1998	pre_tend = 0.0_wp
1999	pre_v = 0.0_wp
2000	!
2001	!-- Calculate preliminary value (pre_tend) of the tendency
2002	pre_tend = - canopy_drag_coeff * &
2003	lad_local * &
2004	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
2005	u(k,j-1,i+1) + &
2006	u(k,j,i) + &
2007	u(k,j,i+1) ) &
2008	)**2 + &
2009	v(k,j,i)**2 + &
2010	( 0.25_wp * ( w(k-1,j-1,i) + &
2011	w(k-1,j,i) + &
2012	w(k,j-1,i) + &
2013	w(k,j,i) ) &
2014	)**2 &
2015	) * &
2016	v(k,j,i)
2017
2018	!
2019	!-- Calculate preliminary new velocity, based on pre_tend
2020	pre_v = v(k,j,i) + dt_3d * pre_tend
2021	!
2022	!-- Compare sign of old velocity and new preliminary velocity,
2023	!-- and in case the signs are different, limit the tendency
2024	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
2025	pre_tend = - v(k,j,i) * ddt_3d
2026	ELSE
2027	pre_tend = pre_tend
2028	ENDIF
2029	!
2030	!-- Calculate final tendency
2031	tend(k,j,i) = tend(k,j,i) + pre_tend
2032
2033	ENDDO
2034	ENDDO
2035	ENDDO
2036
2037	!
2038	!-- w-component
2039	CASE ( 3 )
2040	DO i = nxl, nxr
2041	DO j = nys, nyn
2042	!
2043	!-- Determine topography-top index on w-grid
2044	DO k = topo_top_ind(j,i,3)+1, topo_top_ind(j,i,3) + pch_index_ji(j,i) - 1
2045
2046	kk = k - topo_top_ind(j,i,3) !- lad arrays are defined flat
2047
2048	pre_tend = 0.0_wp
2049	pre_w = 0.0_wp
2050	!
2051	!-- Calculate preliminary value (pre_tend) of the tendency
2052	pre_tend = - canopy_drag_coeff * &
2053	(0.5_wp * &
2054	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
2055	SQRT( ( 0.25_wp * ( u(k,j,i) + &
2056	u(k,j,i+1) + &
2057	u(k+1,j,i) + &
2058	u(k+1,j,i+1) ) &
2059	)**2 + &
2060	( 0.25_wp * ( v(k,j,i) + &
2061	v(k,j+1,i) + &
2062	v(k+1,j,i) + &
2063	v(k+1,j+1,i) ) &
2064	)**2 + &
2065	w(k,j,i)**2 &
2066	) * &
2067	w(k,j,i)
2068	!
2069	!-- Calculate preliminary new velocity, based on pre_tend
2070	pre_w = w(k,j,i) + dt_3d * pre_tend
2071	!
2072	!-- Compare sign of old velocity and new preliminary velocity,
2073	!-- and in case the signs are different, limit the tendency
2074	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
2075	pre_tend = - w(k,j,i) * ddt_3d
2076	ELSE
2077	pre_tend = pre_tend
2078	ENDIF
2079	!
2080	!-- Calculate final tendency
2081	tend(k,j,i) = tend(k,j,i) + pre_tend
2082
2083	ENDDO
2084	ENDDO
2085	ENDDO
2086
2087	!
2088	!-- potential temperature
2089	CASE ( 4 )
2090	IF ( humidity ) THEN
2091	DO i = nxl, nxr
2092	DO j = nys, nyn
2093	!-- Determine topography-top index on scalar-grid
2094	DO k = topo_top_ind(j,i,0)+1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2095	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2096	tend(k,j,i) = tend(k,j,i) + pcm_heating_rate(kk,j,i) - pcm_latent_rate(kk,j,i)
2097	ENDDO
2098	ENDDO
2099	ENDDO
2100	ELSE
2101	DO i = nxl, nxr
2102	DO j = nys, nyn
2103	!-- Determine topography-top index on scalar-grid
2104	DO k = topo_top_ind(j,i,0)+1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2105	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2106	tend(k,j,i) = tend(k,j,i) + pcm_heating_rate(kk,j,i)
2107	ENDDO
2108	ENDDO
2109	ENDDO
2110	ENDIF
2111
2112	!
2113	!-- humidity
2114	CASE ( 5 )
2115	DO i = nxl, nxr
2116	DO j = nys, nyn
2117	!
2118	!-- Determine topography-top index on scalar-grid
2119	DO k = topo_top_ind(j,i,0)+1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2120
2121	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2122
2123	IF ( .NOT. plant_canopy_transpiration ) THEN
2124	! pcm_transpiration_rate is calculated in radiation model
2125	! in case of plant_canopy_transpiration = .T.
2126	! to include also the dependecy to the radiation
2127	! in the plant canopy box
2128	pcm_transpiration_rate(kk,j,i) = - leaf_scalar_exch_coeff &
2129	* lad_s(kk,j,i) * &
2130	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2131	u(k,j,i+1) ) &
2132	)**2 + &
2133	( 0.5_wp * ( v(k,j,i) + &
2134	v(k,j+1,i) ) &
2135	)**2 + &
2136	( 0.5_wp * ( w(k-1,j,i) + &
2137	w(k,j,i) ) &
2138	)**2 &
2139	) * &
2140	( q(k,j,i) - leaf_surface_conc )
2141	ENDIF
2142
2143	tend(k,j,i) = tend(k,j,i) + pcm_transpiration_rate(kk,j,i)
2144	ENDDO
2145	ENDDO
2146	ENDDO
2147
2148	!
2149	!-- sgs-tke
2150	CASE ( 6 )
2151	DO i = nxl, nxr
2152	DO j = nys, nyn
2153	!
2154	!-- Determine topography-top index on scalar-grid
2155	DO k = topo_top_ind(j,i,0)+1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2156
2157	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2158	tend(k,j,i) = tend(k,j,i) - &
2159	2.0_wp * canopy_drag_coeff * &
2160	lad_s(kk,j,i) * &
2161	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2162	u(k,j,i+1) ) &
2163	)**2 + &
2164	( 0.5_wp * ( v(k,j,i) + &
2165	v(k,j+1,i) ) &
2166	)**2 + &
2167	( 0.5_wp * ( w(k,j,i) + &
2168	w(k+1,j,i) ) &
2169	)**2 &
2170	) * &
2171	e(k,j,i)
2172	ENDDO
2173	ENDDO
2174	ENDDO
2175	!
2176	!-- scalar concentration
2177	CASE ( 7 )
2178	DO i = nxl, nxr
2179	DO j = nys, nyn
2180	!
2181	!-- Determine topography-top index on scalar-grid
2182	DO k = topo_top_ind(j,i,0)+1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2183
2184	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2185	tend(k,j,i) = tend(k,j,i) - &
2186	leaf_scalar_exch_coeff * &
2187	lad_s(kk,j,i) * &
2188	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2189	u(k,j,i+1) ) &
2190	)**2 + &
2191	( 0.5_wp * ( v(k,j,i) + &
2192	v(k,j+1,i) ) &
2193	)**2 + &
2194	( 0.5_wp * ( w(k-1,j,i) + &
2195	w(k,j,i) ) &
2196	)**2 &
2197	) * &
2198	( s(k,j,i) - leaf_surface_conc )
2199	ENDDO
2200	ENDDO
2201	ENDDO
2202
2203
2204
2205	CASE DEFAULT
2206
2207	WRITE( message_string, * ) 'wrong component: ', component
2208	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
2209
2210	END SELECT
2211
2212	END SUBROUTINE pcm_tendency
2213
2214
2215	!------------------------------------------------------------------------------!
2216	! Description:
2217	! ------------
2218	!> Calculation of the tendency terms, accounting for the effect of the plant
2219	!> canopy on momentum and scalar quantities.
2220	!>
2221	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
2222	!> (defined on scalar grid), as initialized in subroutine pcm_init.
2223	!> The lad on the w-grid is vertically interpolated from the surrounding
2224	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
2225	!> k = pch_index. Here, the lad is zero.
2226	!>
2227	!> The canopy drag must be limited (previously accounted for by calculation of
2228	!> a limiting canopy timestep for the determination of the maximum LES timestep
2229	!> in subroutine timestep), since it is physically impossible that the canopy
2230	!> drag alone can locally change the sign of a velocity component. This
2231	!> limitation is realized by calculating preliminary tendencies and velocities.
2232	!> It is subsequently checked if the preliminary new velocity has a different
2233	!> sign than the current velocity. If so, the tendency is limited in a way that
2234	!> the velocity can at maximum be reduced to zero by the canopy drag.
2235	!>
2236	!>
2237	!> Call for grid point i,j
2238	!------------------------------------------------------------------------------!
2239	SUBROUTINE pcm_tendency_ij( i, j, component )
2240
2241	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
2242	INTEGER(iwp) :: i !< running index
2243	INTEGER(iwp) :: j !< running index
2244	INTEGER(iwp) :: k !< running index
2245	INTEGER(iwp) :: kk !< running index for flat lad arrays
2246
2247	LOGICAL :: building_edge_e !< control flag indicating an eastward-facing building edge
2248	LOGICAL :: building_edge_n !< control flag indicating a north-facing building edge
2249	LOGICAL :: building_edge_s !< control flag indicating a south-facing building edge
2250	LOGICAL :: building_edge_w !< control flag indicating a westward-facing building edge
2251
2252	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
2253	REAL(wp) :: lad_local !< local lad value
2254	REAL(wp) :: pre_tend !< preliminary tendency
2255	REAL(wp) :: pre_u !< preliminary u-value
2256	REAL(wp) :: pre_v !< preliminary v-value
2257	REAL(wp) :: pre_w !< preliminary w-value
2258
2259
2260	ddt_3d = 1.0_wp / dt_3d
2261	!
2262	!-- Compute drag for the three velocity components and the SGS-TKE
2263	SELECT CASE ( component )
2264
2265	!
2266	!-- u-component
2267	CASE ( 1 )
2268	!
2269	!-- Set control flags indicating east- and westward-orientated
2270	!-- building edges. Note, building_egde_w is set from the perspective
2271	!-- of the potential rooftop grid point, while building_edge_e is
2272	!-- is set from the perspective of the non-building grid point.
2273	building_edge_w = ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) ) .AND. &
2274	.NOT. ANY( BTEST( wall_flags_total_0(:,j,i-1), 6 ) )
2275	building_edge_e = ANY( BTEST( wall_flags_total_0(:,j,i-1), 6 ) ) .AND. &
2276	.NOT. ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )
2277	!
2278	!-- Determine topography-top index on u-grid
2279	DO k = topo_top_ind(j,i,1) + 1, topo_top_ind(j,i,1) + pch_index_ji(j,i)
2280
2281	kk = k - topo_top_ind(j,i,1) !- lad arrays are defined flat
2282
2283	!
2284	!-- In order to create sharp boundaries of the plant canopy,
2285	!-- the lad on the u-grid at index (k,j,i) is equal to lad_s(k,j,i),
2286	!-- rather than being interpolated from the surrounding lad_s,
2287	!-- because this would yield smaller lad at the canopy boundaries
2288	!-- than inside of the canopy.
2289	!-- For the same reason, the lad at the rightmost(i+1)canopy
2290	!-- boundary on the u-grid equals lad_s(k,j,i), which is considered
2291	!-- in the next if-statement. Note, at left-sided building edges
2292	!-- this is not applied, here the LAD is equals the LAD at grid
2293	!-- point (k,j,i), in order to avoid that LAD is mistakenly mapped
2294	!-- on top of a roof where (usually) is no LAD is defined.
2295	lad_local = lad_s(kk,j,i)
2296	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp .AND. &
2297	.NOT. building_edge_w ) lad_local = lad_s(kk,j,i-1)
2298	!
2299	!-- In order to avoid that LAD is mistakenly considered at right-
2300	!-- sided building edges (here the topography-top index for the
2301	!-- u-component at index j,i is still on the building while the
2302	!-- topography top for the scalar isn't), LAD is taken from grid
2303	!-- point (j,i-1).
2304	IF ( lad_local > 0.0_wp .AND. lad_s(kk,j,i-1) == 0.0_wp .AND. &
2305	building_edge_e ) lad_local = lad_s(kk,j,i-1)
2306
2307	pre_tend = 0.0_wp
2308	pre_u = 0.0_wp
2309	!
2310	!-- Calculate preliminary value (pre_tend) of the tendency
2311	pre_tend = - canopy_drag_coeff * &
2312	lad_local * &
2313	SQRT( u(k,j,i)**2 + &
2314	( 0.25_wp * ( v(k,j,i-1) + &
2315	v(k,j,i) + &
2316	v(k,j+1,i) + &
2317	v(k,j+1,i-1) ) &
2318	)**2 + &
2319	( 0.25_wp * ( w(k-1,j,i-1) + &
2320	w(k-1,j,i) + &
2321	w(k,j,i-1) + &
2322	w(k,j,i) ) &
2323	)**2 &
2324	) * &
2325	u(k,j,i)
2326
2327	!
2328	!-- Calculate preliminary new velocity, based on pre_tend
2329	pre_u = u(k,j,i) + dt_3d * pre_tend
2330	!
2331	!-- Compare sign of old velocity and new preliminary velocity,
2332	!-- and in case the signs are different, limit the tendency
2333	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
2334	pre_tend = - u(k,j,i) * ddt_3d
2335	ELSE
2336	pre_tend = pre_tend
2337	ENDIF
2338	!
2339	!-- Calculate final tendency
2340	tend(k,j,i) = tend(k,j,i) + pre_tend
2341	ENDDO
2342
2343
2344	!
2345	!-- v-component
2346	CASE ( 2 )
2347	!
2348	!-- Set control flags indicating north- and southward-orientated
2349	!-- building edges. Note, building_egde_s is set from the perspective
2350	!-- of the potential rooftop grid point, while building_edge_n is
2351	!-- is set from the perspective of the non-building grid point.
2352	building_edge_s = ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) ) .AND. &
2353	.NOT. ANY( BTEST( wall_flags_total_0(:,j-1,i), 6 ) )
2354	building_edge_n = ANY( BTEST( wall_flags_total_0(:,j-1,i), 6 ) ) .AND. &
2355	.NOT. ANY( BTEST( wall_flags_total_0(:,j,i), 6 ) )
2356	!
2357	!-- Determine topography-top index on v-grid
2358	DO k = topo_top_ind(j,i,2) + 1, topo_top_ind(j,i,2) + pch_index_ji(j,i)
2359
2360	kk = k - topo_top_ind(j,i,2) !- lad arrays are defined flat
2361	!
2362	!-- In order to create sharp boundaries of the plant canopy,
2363	!-- the lad on the v-grid at index (k,j,i) is equal to lad_s(k,j,i),
2364	!-- rather than being interpolated from the surrounding lad_s,
2365	!-- because this would yield smaller lad at the canopy boundaries
2366	!-- than inside of the canopy.
2367	!-- For the same reason, the lad at the northmost(j+1)canopy
2368	!-- boundary on the v-grid equals lad_s(k,j,i), which is considered
2369	!-- in the next if-statement. Note, at left-sided building edges
2370	!-- this is not applied, here the LAD is equals the LAD at grid
2371	!-- point (k,j,i), in order to avoid that LAD is mistakenly mapped
2372	!-- on top of a roof where (usually) is no LAD is defined.
2373	lad_local = lad_s(kk,j,i)
2374	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp .AND. &
2375	.NOT. building_edge_s ) lad_local = lad_s(kk,j-1,i)
2376	!
2377	!-- In order to avoid that LAD is mistakenly considered at right-
2378	!-- sided building edges (here the topography-top index for the
2379	!-- u-component at index j,i is still on the building while the
2380	!-- topography top for the scalar isn't), LAD is taken from grid
2381	!-- point (j,i-1).
2382	IF ( lad_local > 0.0_wp .AND. lad_s(kk,j-1,i) == 0.0_wp .AND. &
2383	building_edge_n ) lad_local = lad_s(kk,j-1,i)
2384
2385	pre_tend = 0.0_wp
2386	pre_v = 0.0_wp
2387	!
2388	!-- Calculate preliminary value (pre_tend) of the tendency
2389	pre_tend = - canopy_drag_coeff * &
2390	lad_local * &
2391	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
2392	u(k,j-1,i+1) + &
2393	u(k,j,i) + &
2394	u(k,j,i+1) ) &
2395	)**2 + &
2396	v(k,j,i)**2 + &
2397	( 0.25_wp * ( w(k-1,j-1,i) + &
2398	w(k-1,j,i) + &
2399	w(k,j-1,i) + &
2400	w(k,j,i) ) &
2401	)**2 &
2402	) * &
2403	v(k,j,i)
2404
2405	!
2406	!-- Calculate preliminary new velocity, based on pre_tend
2407	pre_v = v(k,j,i) + dt_3d * pre_tend
2408	!
2409	!-- Compare sign of old velocity and new preliminary velocity,
2410	!-- and in case the signs are different, limit the tendency
2411	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
2412	pre_tend = - v(k,j,i) * ddt_3d
2413	ELSE
2414	pre_tend = pre_tend
2415	ENDIF
2416	!
2417	!-- Calculate final tendency
2418	tend(k,j,i) = tend(k,j,i) + pre_tend
2419	ENDDO
2420
2421
2422	!
2423	!-- w-component
2424	CASE ( 3 )
2425	!
2426	!-- Determine topography-top index on w-grid
2427	DO k = topo_top_ind(j,i,3) + 1, topo_top_ind(j,i,3) + pch_index_ji(j,i) - 1
2428
2429	kk = k - topo_top_ind(j,i,3) !- lad arrays are defined flat
2430
2431	pre_tend = 0.0_wp
2432	pre_w = 0.0_wp
2433	!
2434	!-- Calculate preliminary value (pre_tend) of the tendency
2435	pre_tend = - canopy_drag_coeff * &
2436	(0.5_wp * &
2437	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
2438	SQRT( ( 0.25_wp * ( u(k,j,i) + &
2439	u(k,j,i+1) + &
2440	u(k+1,j,i) + &
2441	u(k+1,j,i+1) ) &
2442	)**2 + &
2443	( 0.25_wp * ( v(k,j,i) + &
2444	v(k,j+1,i) + &
2445	v(k+1,j,i) + &
2446	v(k+1,j+1,i) ) &
2447	)**2 + &
2448	w(k,j,i)**2 &
2449	) * &
2450	w(k,j,i)
2451	!
2452	!-- Calculate preliminary new velocity, based on pre_tend
2453	pre_w = w(k,j,i) + dt_3d * pre_tend
2454	!
2455	!-- Compare sign of old velocity and new preliminary velocity,
2456	!-- and in case the signs are different, limit the tendency
2457	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
2458	pre_tend = - w(k,j,i) * ddt_3d
2459	ELSE
2460	pre_tend = pre_tend
2461	ENDIF
2462	!
2463	!-- Calculate final tendency
2464	tend(k,j,i) = tend(k,j,i) + pre_tend
2465	ENDDO
2466
2467	!
2468	!-- potential temperature
2469	CASE ( 4 )
2470	!
2471	!-- Determine topography-top index on scalar grid
2472	IF ( humidity ) THEN
2473	DO k = topo_top_ind(j,i,0) + 1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2474	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2475	tend(k,j,i) = tend(k,j,i) + pcm_heating_rate(kk,j,i) - &
2476	pcm_latent_rate(kk,j,i)
2477	ENDDO
2478	ELSE
2479	DO k = topo_top_ind(j,i,0) + 1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2480	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2481	tend(k,j,i) = tend(k,j,i) + pcm_heating_rate(kk,j,i)
2482	ENDDO
2483	ENDIF
2484
2485	!
2486	!-- humidity
2487	CASE ( 5 )
2488	!
2489	!-- Determine topography-top index on scalar grid
2490	DO k = topo_top_ind(j,i,0) + 1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2491	kk = k - topo_top_ind(j,i,0) !- lad arrays are defined flat
2492	IF ( .NOT. plant_canopy_transpiration ) THEN
2493	! pcm_transpiration_rate is calculated in radiation model
2494	! in case of plant_canopy_transpiration = .T.
2495	! to include also the dependecy to the radiation
2496	! in the plant canopy box
2497	pcm_transpiration_rate(kk,j,i) = - leaf_scalar_exch_coeff &
2498	* lad_s(kk,j,i) * &
2499	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2500	u(k,j,i+1) ) &
2501	)**2 + &
2502	( 0.5_wp * ( v(k,j,i) + &
2503	v(k,j+1,i) ) &
2504	)**2 + &
2505	( 0.5_wp * ( w(k-1,j,i) + &
2506	w(k,j,i) ) &
2507	)**2 &
2508	) * &
2509	( q(k,j,i) - leaf_surface_conc )
2510	ENDIF
2511
2512	tend(k,j,i) = tend(k,j,i) + pcm_transpiration_rate(kk,j,i)
2513
2514	ENDDO
2515
2516	!
2517	!-- sgs-tke
2518	CASE ( 6 )
2519	!
2520	!-- Determine topography-top index on scalar grid
2521	DO k = topo_top_ind(j,i,0) + 1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2522
2523	kk = k - topo_top_ind(j,i,0)
2524	tend(k,j,i) = tend(k,j,i) - &
2525	2.0_wp * canopy_drag_coeff * &
2526	lad_s(kk,j,i) * &
2527	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2528	u(k,j,i+1) ) &
2529	)**2 + &
2530	( 0.5_wp * ( v(k,j,i) + &
2531	v(k,j+1,i) ) &
2532	)**2 + &
2533	( 0.5_wp * ( w(k,j,i) + &
2534	w(k+1,j,i) ) &
2535	)**2 &
2536	) * &
2537	e(k,j,i)
2538	ENDDO
2539
2540	!
2541	!-- scalar concentration
2542	CASE ( 7 )
2543	!
2544	!-- Determine topography-top index on scalar grid
2545	DO k = topo_top_ind(j,i,0) + 1, topo_top_ind(j,i,0) + pch_index_ji(j,i)
2546
2547	kk = k - topo_top_ind(j,i,0)
2548	tend(k,j,i) = tend(k,j,i) - &
2549	leaf_scalar_exch_coeff * &
2550	lad_s(kk,j,i) * &
2551	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2552	u(k,j,i+1) ) &
2553	)**2 + &
2554	( 0.5_wp * ( v(k,j,i) + &
2555	v(k,j+1,i) ) &
2556	)**2 + &
2557	( 0.5_wp * ( w(k-1,j,i) + &
2558	w(k,j,i) ) &
2559	)**2 &
2560	) * &
2561	( s(k,j,i) - leaf_surface_conc )
2562	ENDDO
2563
2564	CASE DEFAULT
2565
2566	WRITE( message_string, * ) 'wrong component: ', component
2567	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
2568
2569	END SELECT
2570
2571	END SUBROUTINE pcm_tendency_ij
2572
2573	!------------------------------------------------------------------------------!
2574	! Description:
2575	! ------------
2576	!> Subroutine writes global restart data
2577	!------------------------------------------------------------------------------!
2578	SUBROUTINE pcm_wrd_global
2579
2580	IF ( TRIM( restart_data_format_output ) == 'fortran_binary' ) THEN
2581
2582	CALL wrd_write_string( 'pch_index' )
2583	WRITE ( 14 ) pch_index
2584
2585	ELSEIF ( restart_data_format_output(1:3) == 'mpi' ) THEN
2586
2587	CALL wrd_mpi_io( 'pch_index', pch_index )
2588
2589	ENDIF
2590
2591	END SUBROUTINE pcm_wrd_global
2592
2593	!------------------------------------------------------------------------------!
2594	! Description:
2595	! ------------
2596	!> Subroutine writes local (subdomain) restart data
2597	!------------------------------------------------------------------------------!
2598	SUBROUTINE pcm_wrd_local
2599
2600	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: tmp_3d !< temporary array to store pcm data with
2601	!< non-standard vertical index bounds
2602
2603	IF ( TRIM( restart_data_format_output ) == 'fortran_binary' ) THEN
2604
2605	IF ( ALLOCATED( pcm_heatrate_av ) ) THEN
2606	CALL wrd_write_string( 'pcm_heatrate_av' )
2607	WRITE ( 14 ) pcm_heatrate_av
2608	ENDIF
2609
2610	IF ( ALLOCATED( pcm_latentrate_av ) ) THEN
2611	CALL wrd_write_string( 'pcm_latentrate_av' )
2612	WRITE ( 14 ) pcm_latentrate_av
2613	ENDIF
2614
2615	IF ( ALLOCATED( pcm_transpirationrate_av ) ) THEN
2616	CALL wrd_write_string( 'pcm_transpirationrate_av' )
2617	WRITE ( 14 ) pcm_transpirationrate_av
2618	ENDIF
2619
2620	ELSEIF ( restart_data_format_output(1:3) == 'mpi' ) THEN
2621
2622	!
2623	!-- Plant canopy arrays have non standard reduced vertical index bounds. They are stored with
2624	!-- full vertical bounds (bzb:nzt+1) in the restart file and must be re-stored before writing.
2625	IF ( ALLOCATED( pcm_heatrate_av ) ) THEN
2626	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
2627	tmp_3d(nzb:pch_index,:,:) = pcm_heatrate_av
2628	tmp_3d(pch_index+1:nzt+1,:,:) = 0.0_wp
2629	CALL wrd_mpi_io( 'pcm_heatrate_av', tmp_3d )
2630	DEALLOCATE( tmp_3d )
2631	ENDIF
2632	IF ( ALLOCATED( pcm_latentrate_av ) ) THEN
2633	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
2634	tmp_3d(nzb:pch_index,:,:) = pcm_latentrate_av
2635	tmp_3d(pch_index+1:nzt+1,:,:) = 0.0_wp
2636	CALL wrd_mpi_io( 'pcm_latentrate_av', tmp_3d )
2637	DEALLOCATE( tmp_3d )
2638	ENDIF
2639	IF ( ALLOCATED( pcm_transpirationrate_av ) ) THEN
2640	ALLOCATE( tmp_3d(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
2641	tmp_3d(nzb:pch_index,:,:) = pcm_transpirationrate_av
2642	tmp_3d(pch_index+1:nzt+1,:,:) = 0.0_wp
2643	CALL wrd_mpi_io( 'pcm_transpirationrate_av', tmp_3d )
2644	DEALLOCATE( tmp_3d )
2645	ENDIF
2646
2647	ENDIF
2648
2649	END SUBROUTINE pcm_wrd_local
2650
2651
2652	END MODULE plant_canopy_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |