Home

Context Navigation

source: palm/trunk/SOURCE/plant_canopy_model_mod.f90 @ 3712

Last change on this file since 3712 was 3685, checked in by knoop, 6 years ago
Some interface calls moved to module_interface + cleanup
Property svn:keywords set to `Id`
File size: 88.6 KB

Line
1	!> @file plant_canopy_model_mod.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2019 Leibniz Universitaet Hannover
18	! Copyright 2018 Institute of Computer Science of the
19	! Czech Academy of Sciences, Prague
20	!------------------------------------------------------------------------------!
21	!
22	! Current revisions:
23	! ------------------
24	!
25	!
26	! Former revisions:
27	! -----------------
28	! $Id: plant_canopy_model_mod.f90 3685 2019-01-21 01:02:11Z kanani $
29	! Some interface calls moved to module_interface + cleanup
30	!
31	! 3655 2019-01-07 16:51:22Z knoop
32	! unused variables removed
33	!
34	! 3589 2018-11-30 15:09:51Z suehring
35	! Formatting adjustments
36	!
37	! 3582 2018-11-29 19:16:36Z suehring
38	! working precision added to make code Fortran 2008 conform
39	!
40	! 3498 2018-11-07 10:53:03Z gronemeier
41	! corrected revisions section
42	!
43	! 3497 2018-11-06 17:15:18Z suehring
44	! Remove write statement.
45	!
46	! 3467 2018-10-30 19:05:21Z suehring
47	! Add calculation of transpiration for resolved plant canopy (trees, shrubs)
48	! (V. Fuka, MFF UK Prague, J.Resler, ICS AS, Prague)
49	!
50	! Fix reading plant canopy over buildings
51	!
52	! 3337 2018-10-12 15:17:09Z kanani
53	! Fix reading plant canopy over buildings
54	!
55	! 3294 2018-10-01 02:37:10Z raasch
56	! ocean renamed ocean_mode
57	!
58	! 3274 2018-09-24 15:42:55Z knoop
59	! Modularization of all bulk cloud physics code components
60	!
61	! 3248 2018-09-14 09:42:06Z sward
62	! Minor formating changes
63	!
64	! 3246 2018-09-13 15:14:50Z sward
65	! Added error handling for input namelist via parin_fail_message
66	!
67	! 3241 2018-09-12 15:02:00Z raasch
68	! unused variables removed
69	!
70	! 3065 2018-06-12 07:03:02Z Giersch
71	! dz was replaced by the help of zw to allow for vertical stretching
72	!
73	! 3049 2018-05-29 13:52:36Z Giersch
74	! Error messages revised
75	!
76	! 3045 2018-05-28 07:55:41Z Giersch
77	! Error message revised
78	!
79	! 3022 2018-05-18 11:12:35Z suehring
80	! Bugfix in allocation of transpiration rate
81	!
82	! 3014 2018-05-09 08:42:38Z maronga
83	! Bugfix: nzb_do and nzt_do were not used for 3d data output
84	! Added pc_transpiration_rate
85	!
86	! 2977 2018-04-17 10:27:57Z kanani
87	! Implement changes from branch radiation (r2948-2971) with minor modifications,
88	! plus some formatting.
89	! (moh.hefny):
90	! Add plant canopy type to account for changes in LAD (based on the changes
91	! done by Resler & Pavel) and correct the error message to PALM Standard.
92	!
93	! 2932 2018-03-26 09:39:22Z maronga
94	! renamed canopy_par to plant_canopy_parameters
95	!
96	! 2920 2018-03-22 11:22:01Z kanani
97	! Move usm_lad_rma and prototype_lad to radiation_model (moh.hefny)
98	!
99	! 2892 2018-03-14 15:06:29Z suehring
100	! Bugfix, read separate ASCII LAD files for parent and child model.
101	!
102	! 2770 2018-01-25 15:10:09Z kanani
103	! Correction of parameter check
104	!
105	! 2768 2018-01-24 15:38:29Z kanani
106	! Added check for output quantity pcm_heatrate, some formatting
107	!
108	! 2766 2018-01-22 17:17:47Z kanani
109	! Increased LEN of canopy mode to 30
110	!
111	! 2746 2018-01-15 12:06:04Z suehring
112	! Move flag plant canopy to modules
113	!
114	! 2718 2018-01-02 08:49:38Z maronga
115	! Corrected "Former revisions" section
116	!
117	! 2701 2017-12-15 15:40:50Z suehring
118	! Changes from last commit documented
119	!
120	! 2698 2017-12-14 18:46:24Z suehring
121	! Bugfix in get_topography_top_index
122	!
123	! 2696 2017-12-14 17:12:51Z kanani
124	! Change in file header (GPL part)
125	! Bugfix for vertical loop index pch_index in case of Netcdf input
126	! Introduce 2D index array incorporate canopy top index
127	! Check if canopy on top of topography do not exceed vertical dimension
128	! Add check for canopy_mode in case of Netcdf input.
129	! Enable _FillValue output for 3d quantities
130	! Bugfix in reading of PIDS leaf area density (MS)
131	!
132	! 2669 2017-12-06 16:03:27Z raasch
133	! coupling_char removed
134	!
135	! 2512 2017-10-04 08:26:59Z raasch
136	! upper bounds of 3d output changed from nx+1,ny+1 to nx,ny
137	! no output of ghost layer data
138	!
139	! 2318 2017-07-20 17:27:44Z suehring
140	! Get topography top index via Function call
141	!
142	! 2317 2017-07-20 17:27:19Z suehring
143	! Changed error messages
144	!
145	! 2233 2017-05-30 18:08:54Z suehring
146	!
147	! 2232 2017-05-30 17:47:52Z suehring
148	! Adjustments to new topography concept
149	!
150	! 2213 2017-04-24 15:10:35Z kanani
151	! Bugfix: exchange of ghost points in array pc_heating_rate needed for output
152	! of pcm_heatrate, onetime ghost point exchange of lad_s after initialization.
153	! Formatting and clean-up of subroutine pcm_read_plant_canopy_3d,
154	! minor re-organization of canopy-heating initialization.
155	!
156	! 2209 2017-04-19 09:34:46Z kanani
157	! Added 3d output of leaf area density (pcm_lad) and canopy
158	! heat rate (pcm_heatrate)
159	!
160	! 2024 2016-10-12 16:42:37Z kanani
161	! Added missing lad_s initialization
162	!
163	! 2011 2016-09-19 17:29:57Z kanani
164	! Renamed canopy_heat_flux to pc_heating_rate, since the original meaning/
165	! calculation of the quantity has changed, related to the urban surface model
166	! and similar future applications.
167	!
168	! 2007 2016-08-24 15:47:17Z kanani
169	! Added SUBROUTINE pcm_read_plant_canopy_3d for reading 3d plant canopy data
170	! from file (new case canopy_mode=read_from_file_3d) in the course of
171	! introduction of urban surface model,
172	! introduced variable ext_coef,
173	! resorted SUBROUTINEs to alphabetical order
174	!
175	! 2000 2016-08-20 18:09:15Z knoop
176	! Forced header and separation lines into 80 columns
177	!
178	! 1960 2016-07-12 16:34:24Z suehring
179	! Separate humidity and passive scalar
180	!
181	! 1953 2016-06-21 09:28:42Z suehring
182	! Bugfix, lad_s and lad must be public
183	!
184	! 1826 2016-04-07 12:01:39Z maronga
185	! Further modularization
186	!
187	! 1721 2015-11-16 12:56:48Z raasch
188	! bugfixes: shf is reduced in areas covered with canopy only,
189	! canopy is set on top of topography
190	!
191	! 1682 2015-10-07 23:56:08Z knoop
192	! Code annotations made doxygen readable
193	!
194	! 1484 2014-10-21 10:53:05Z kanani
195	! Changes due to new module structure of the plant canopy model:
196	! module plant_canopy_model_mod now contains a subroutine for the
197	! initialization of the canopy model (pcm_init),
198	! limitation of the canopy drag (previously accounted for by calculation of
199	! a limiting canopy timestep for the determination of the maximum LES timestep
200	! in subroutine timestep) is now realized by the calculation of pre-tendencies
201	! and preliminary velocities in subroutine pcm_tendency,
202	! some redundant MPI communication removed in subroutine pcm_init
203	! (was previously in init_3d_model),
204	! unnecessary 3d-arrays lad_u, lad_v, lad_w removed - lad information on the
205	! respective grid is now provided only by lad_s (e.g. in the calculation of
206	! the tendency terms or of cum_lai_hf),
207	! drag_coefficient, lai, leaf_surface_concentration,
208	! scalar_exchange_coefficient, sec and sls renamed to canopy_drag_coeff,
209	! cum_lai_hf, leaf_surface_conc, leaf_scalar_exch_coeff, lsec and lsc,
210	! respectively,
211	! unnecessary 3d-arrays cdc, lsc and lsec now defined as single-value constants,
212	! USE-statements and ONLY-lists modified accordingly
213	!
214	! 1340 2014-03-25 19:45:13Z kanani
215	! REAL constants defined as wp-kind
216	!
217	! 1320 2014-03-20 08:40:49Z raasch
218	! ONLY-attribute added to USE-statements,
219	! kind-parameters added to all INTEGER and REAL declaration statements,
220	! kinds are defined in new module kinds,
221	! old module precision_kind is removed,
222	! revision history before 2012 removed,
223	! comment fields (!:) to be used for variable explanations added to
224	! all variable declaration statements
225	!
226	! 1036 2012-10-22 13:43:42Z raasch
227	! code put under GPL (PALM 3.9)
228	!
229	! 138 2007-11-28 10:03:58Z letzel
230	! Initial revision
231	!
232	! Description:
233	! ------------
234	!> 1) Initialization of the canopy model, e.g. construction of leaf area density
235	!> profile (subroutine pcm_init).
236	!> 2) Calculation of sinks and sources of momentum, heat and scalar concentration
237	!> due to canopy elements (subroutine pcm_tendency).
238	!------------------------------------------------------------------------------!
239	MODULE plant_canopy_model_mod
240
241	USE arrays_3d, &
242	ONLY: dzu, dzw, e, exner, hyp, pt, q, s, tend, u, v, w, zu, zw
243
244	USE basic_constants_and_equations_mod, &
245	ONLY: c_p, degc_to_k, l_v, lv_d_cp, r_d, rd_d_rv
246
247	USE control_parameters, &
248	ONLY: humidity
249
250	USE indices, &
251	ONLY: nbgp, nxl, nxlg, nxlu, nxr, nxrg, nyn, nyng, nys, nysg, nysv, &
252	nz, nzb, nzt
253
254	USE kinds
255
256	USE pegrid
257
258	USE surface_mod, &
259	ONLY: get_topography_top_index_ji
260
261
262	IMPLICIT NONE
263
264
265	CHARACTER (LEN=30) :: canopy_mode = 'block' !< canopy coverage
266	LOGICAL :: plant_canopy_transpiration = .FALSE. !< flag to switch calculation of transpiration and corresponding latent heat
267	!< for resolved plant canopy inside radiation model
268	!< (calls subroutine pcm_calc_transpiration_rate from module plant_canopy_mod)
269
270	INTEGER(iwp) :: pch_index = 0 !< plant canopy height/top index
271	INTEGER(iwp) :: lad_vertical_gradient_level_ind(10) = -9999 !< lad-profile levels (index)
272
273	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: pch_index_ji !< local plant canopy top
274
275	LOGICAL :: calc_beta_lad_profile = .FALSE. !< switch for calc. of lad from beta func.
276
277	REAL(wp) :: alpha_lad = 9999999.9_wp !< coefficient for lad calculation
278	REAL(wp) :: beta_lad = 9999999.9_wp !< coefficient for lad calculation
279	REAL(wp) :: canopy_drag_coeff = 0.0_wp !< canopy drag coefficient (parameter)
280	REAL(wp) :: cdc = 0.0_wp !< canopy drag coeff. (abbreviation used in equations)
281	REAL(wp) :: cthf = 0.0_wp !< canopy top heat flux
282	REAL(wp) :: dt_plant_canopy = 0.0_wp !< timestep account. for canopy drag
283	REAL(wp) :: ext_coef = 0.6_wp !< extinction coefficient
284	REAL(wp) :: lad_surface = 0.0_wp !< lad surface value
285	REAL(wp) :: lai_beta = 0.0_wp !< leaf area index (lai) for lad calc.
286	REAL(wp) :: leaf_scalar_exch_coeff = 0.0_wp !< canopy scalar exchange coeff.
287	REAL(wp) :: leaf_surface_conc = 0.0_wp !< leaf surface concentration
288	REAL(wp) :: lsc = 0.0_wp !< leaf surface concentration
289	REAL(wp) :: lsec = 0.0_wp !< leaf scalar exchange coeff.
290
291	REAL(wp) :: lad_vertical_gradient(10) = 0.0_wp !< lad gradient
292	REAL(wp) :: lad_vertical_gradient_level(10) = -9999999.9_wp !< lad-prof. levels (in m)
293
294	REAL(wp) :: lad_type_coef(0:10) = 1.0_wp !< multiplicative coeficients for particular types
295	!< of plant canopy (e.g. deciduous tree during winter)
296
297	REAL(wp), DIMENSION(:), ALLOCATABLE :: lad !< leaf area density
298	REAL(wp), DIMENSION(:), ALLOCATABLE :: pre_lad !< preliminary lad
299
300	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: cum_lai_hf !< cumulative lai for heatflux calc.
301	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: lad_s !< lad on scalar-grid
302	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pc_heating_rate !< plant canopy heating rate
303	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pc_transpiration_rate !< plant canopy transpiration rate
304	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pc_latent_rate !< plant canopy latent heating rate
305
306	SAVE
307
308
309	PRIVATE
310
311	!
312	!-- Public functions
313	PUBLIC pcm_calc_transpiration_rate, pcm_check_data_output, &
314	pcm_check_parameters, pcm_data_output_3d, pcm_define_netcdf_grid, &
315	pcm_header, pcm_init, pcm_parin, pcm_tendency
316
317	!
318	!-- Public variables and constants
319	PUBLIC cdc, pc_heating_rate, pc_transpiration_rate, pc_latent_rate, &
320	canopy_mode, cthf, dt_plant_canopy, lad, lad_s, pch_index, &
321	plant_canopy_transpiration
322
323	INTERFACE pcm_calc_transpiration_rate
324	MODULE PROCEDURE pcm_calc_transpiration_rate
325	END INTERFACE pcm_calc_transpiration_rate
326
327	INTERFACE pcm_check_data_output
328	MODULE PROCEDURE pcm_check_data_output
329	END INTERFACE pcm_check_data_output
330
331	INTERFACE pcm_check_parameters
332	MODULE PROCEDURE pcm_check_parameters
333	END INTERFACE pcm_check_parameters
334
335	INTERFACE pcm_data_output_3d
336	MODULE PROCEDURE pcm_data_output_3d
337	END INTERFACE pcm_data_output_3d
338
339	INTERFACE pcm_define_netcdf_grid
340	MODULE PROCEDURE pcm_define_netcdf_grid
341	END INTERFACE pcm_define_netcdf_grid
342
343	INTERFACE pcm_header
344	MODULE PROCEDURE pcm_header
345	END INTERFACE pcm_header
346
347	INTERFACE pcm_init
348	MODULE PROCEDURE pcm_init
349	END INTERFACE pcm_init
350
351	INTERFACE pcm_parin
352	MODULE PROCEDURE pcm_parin
353	END INTERFACE pcm_parin
354
355	INTERFACE pcm_read_plant_canopy_3d
356	MODULE PROCEDURE pcm_read_plant_canopy_3d
357	END INTERFACE pcm_read_plant_canopy_3d
358
359	INTERFACE pcm_tendency
360	MODULE PROCEDURE pcm_tendency
361	MODULE PROCEDURE pcm_tendency_ij
362	END INTERFACE pcm_tendency
363
364
365	CONTAINS
366
367
368
369	!------------------------------------------------------------------------------!
370	! Description:
371	! ------------
372	!> Calculation of the plant canopy transpiration rate based on the Jarvis-Stewart
373	!> with parametrizations described in Daudet et al. (1999; Agricult. and Forest
374	!> Meteorol. 97) and Ngao, Adam and Saudreau (2017; Agricult. and Forest Meteorol
375	!> 237-238). Model functions f1-f4 were adapted from Stewart (1998; Agric.
376	!> and Forest. Meteorol. 43) instead, because they are valid for broader intervals
377	!> of values. Funcion f4 used in form present in van Wijk et al. (1998;
378	!> Tree Physiology 20).
379	!>
380	!> This subroutine is called from subroutine radiation_interaction
381	!> after the calculation of radiation in plant canopy boxes.
382	!> (arrays pcbinsw and pcbinlw).
383	!>
384	!------------------------------------------------------------------------------!
385	SUBROUTINE pcm_calc_transpiration_rate(i, j, k, kk, pcbsw, pcblw, pcbtr, pcblh)
386
387	USE control_parameters, &
388	ONLY: dz
389
390	USE grid_variables, &
391	ONLY: dx, dy
392
393	IMPLICIT NONE
394	!-- input parameters
395	INTEGER(iwp), INTENT(IN) :: i, j, k, kk !< indices of the pc gridbox
396	REAL(wp), INTENT(IN) :: pcbsw !< sw radiation in gridbox (W)
397	REAL(wp), INTENT(IN) :: pcblw !< lw radiation in gridbox (W)
398	REAL(wp), INTENT(OUT) :: pcbtr !< transpiration rate dq/dt (kg/kg/s)
399	REAL(wp), INTENT(OUT) :: pcblh !< latent heat from transpiration dT/dt (K/s)
400
401	!-- variables and parameters for calculation of transpiration rate
402	REAL(wp) :: sat_press, sat_press_d, temp, v_lad
403	REAL(wp) :: d_fact, g_b, g_s, wind_speed, evapor_rate
404	REAL(wp) :: f1, f2, f3, f4, vpd, rswc, e_eq, e_imp, rad
405	REAL(wp), PARAMETER :: gama_psychr = 66 !< psychrometric constant (Pa/K)
406	REAL(wp), PARAMETER :: g_s_max = 0.01 !< maximum stomatal conductivity (m/s)
407	REAL(wp), PARAMETER :: m_soil = 0.4_wp !< soil water content (needs to adjust or take from LSM)
408	REAL(wp), PARAMETER :: m_wilt = 0.01_wp !< wilting point soil water content (needs to adjust or take from LSM)
409	REAL(wp), PARAMETER :: m_sat = 0.51_wp !< saturation soil water content (needs to adjust or take from LSM)
410	REAL(wp), PARAMETER :: t2_min = 0.0_wp !< minimal temperature for calculation of f2
411	REAL(wp), PARAMETER :: t2_max = 40.0_wp !< maximal temperature for calculation of f2
412
413
414	!-- Temperature (deg C)
415	temp = pt(k,j,i) * exner(k) - degc_to_k
416	!-- Coefficient for conversion of radiation to grid to radiation to unit leaves surface
417	v_lad = 1.0_wp / ( MAX( lad_s(kk,j,i), 1.0e-10_wp ) * dx * dy * dz(1) )
418	!-- Magnus formula for the saturation pressure (see Ngao, Adam and Saudreau (2017) eq. 1)
419	!-- There are updated formulas available, kept consistent with the rest of the parametrization
420	sat_press = 610.8_wp * exp(17.27_wp * temp/(temp + 237.3_wp))
421	!-- Saturation pressure derivative (derivative of the above)
422	sat_press_d = sat_press * 17.27_wp * 237.3_wp / (temp + 237.3_wp)**2
423	!-- Wind speed
424	wind_speed = SQRT( ((u(k,j,i) + u(k,j,i+1))/2.0_wp )**2 + &
425	((v(k,j,i) + v(k,j,i+1))/2.0_wp )**2 + &
426	((w(k,j,i) + w(k,j,i+1))/2.0_wp )**2 )
427	!-- Aerodynamic conductivity (Daudet et al. (1999) eq. 14
428	g_b = 0.01_wp * wind_speed + 0.0071_wp
429	!-- Radiation flux per leaf surface unit
430	rad = pcbsw * v_lad
431	!-- First function for calculation of stomatal conductivity (radiation dependency)
432	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 17
433	f1 = rad * (1000._wp+42.1_wp) / 1000._wp / (rad+42.1_wp)
434	!-- Second function for calculation of stomatal conductivity (temperature dependency)
435	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 21
436	f2 = MAX(t2_min, (temp-t2_min) * (t2_max-temp)**((t2_max-16.9_wp)/(16.9_wp-t2_min)) / &
437	((16.9_wp-t2_min) * (t2_max-16.9_wp)**((t2_max-16.9_wp)/(16.9_wp-t2_min))) )
438	!-- Water pressure deficit
439	!-- Ngao, Adam and Saudreau (2017) eq. 6 but with water vapour partial pressure
440	vpd = max( sat_press - q(k,j,i) * hyp(k) / rd_d_rv, 0._wp )
441	!-- Third function for calculation of stomatal conductivity (water pressure deficit dependency)
442	!-- Ngao, Adam and Saudreau (2017) Table 1, limited from below according to Stewart (1988)
443	!-- The coefficients of the linear dependence should better correspond to broad-leaved trees
444	!-- than the coefficients from Stewart (1988) which correspond to conifer trees.
445	vpd = MIN(MAX(vpd,770.0_wp),3820.0_wp)
446	f3 = -2e-4_wp * vpd + 1.154_wp
447	!-- Fourth function for calculation of stomatal conductivity (soil moisture dependency)
448	!-- Residual soil water content
449	!-- van Wijk et al. (1998; Tree Physiology 20) eq. 7
450	!-- TODO - over LSM surface might be calculated from LSM parameters
451	rswc = ( m_sat - m_soil ) / ( m_sat - m_wilt )
452	!-- van Wijk et al. (1998; Tree Physiology 20) eq. 5-6 (it is a reformulation of eq. 22-23 of Stewart(1988))
453	f4 = MAX(0._wp, MIN(1.0_wp - 0.041_wp * EXP(3.2_wp * rswc), 1.0_wp - 0.041_wp))
454	!-- Stomatal conductivity
455	!-- Stewart (1988; Agric. and Forest. Meteorol. 43) eq. 12
456	!-- (notation according to Ngao, Adam and Saudreau (2017) and others)
457	g_s = g_s_max * f1 * f2 * f3 * f4 + 1.0e-10_wp
458	!-- Decoupling factor
459	!-- Daudet et al. (1999) eq. 6
460	d_fact = (sat_press_d / gama_psychr + 2._wp ) / &
461	(sat_press_d / gama_psychr + 2._wp + 2 * g_b / g_s )
462	!-- Equilibrium evaporation rate
463	!-- Daudet et al. (1999) eq. 4
464	e_eq = (pcbsw + pcblw) * v_lad * sat_press_d / &
465	gama_psychr /( sat_press_d / gama_psychr + 2.0_wp ) / l_v
466	!-- Imposed evaporation rate
467	!-- Daudet et al. (1999) eq. 5
468	e_imp = r_d * pt(k,j,i) * exner(k) / hyp(k) * c_p * g_s * vpd / gama_psychr / l_v
469	!-- Evaporation rate
470	!-- Daudet et al. (1999) eq. 3
471	!-- (evaporation rate is limited to non-negative values)
472	evapor_rate = MAX(d_fact * e_eq + ( 1.0_wp - d_fact ) * e_imp, 0.0_wp)
473	!-- Conversion of evaporation rate to q tendency in gridbox
474	!-- dq/dt = E * LAD * V_g / (rho_air * V_g)
475	pcbtr = evapor_rate * r_d * pt(k,j,i) * exner(k) * lad_s(kk,j,i) / hyp(k) !-- = dq/dt
476	!-- latent heat from evaporation
477	pcblh = pcbtr * lv_d_cp !-- = - dT/dt
478
479	END SUBROUTINE pcm_calc_transpiration_rate
480
481
482	!------------------------------------------------------------------------------!
483	! Description:
484	! ------------
485	!> Check data output for plant canopy model
486	!------------------------------------------------------------------------------!
487	SUBROUTINE pcm_check_data_output( var, unit )
488
489
490	USE control_parameters, &
491	ONLY: message_string, urban_surface
492
493	IMPLICIT NONE
494
495	CHARACTER (LEN=*) :: unit !<
496	CHARACTER (LEN=*) :: var !<
497
498
499	SELECT CASE ( TRIM( var ) )
500
501	CASE ( 'pcm_heatrate' )
502	IF ( cthf == 0.0_wp .AND. .NOT. urban_surface ) THEN
503	message_string = 'output of "' // TRIM( var ) // '" requi' // &
504	'res setting of parameter cthf /= 0.0'
505	CALL message( 'pcm_check_data_output', 'PA1000', 1, 2, 0, 6, 0 )
506	ENDIF
507	unit = 'K s-1'
508
509	CASE ( 'pcm_transpirationrate' )
510	unit = 'kg kg-1 s-1'
511
512	CASE ( 'pcm_latentrate' )
513	unit = 'K s-1'
514
515	CASE ( 'pcm_bowenratio' )
516	unit = 'K s-1'
517
518	CASE ( 'pcm_lad' )
519	unit = 'm2 m-3'
520
521
522	CASE DEFAULT
523	unit = 'illegal'
524
525	END SELECT
526
527
528	END SUBROUTINE pcm_check_data_output
529
530
531	!------------------------------------------------------------------------------!
532	! Description:
533	! ------------
534	!> Check parameters routine for plant canopy model
535	!------------------------------------------------------------------------------!
536	SUBROUTINE pcm_check_parameters
537
538	USE control_parameters, &
539	ONLY: coupling_char, message_string
540
541	USE bulk_cloud_model_mod, &
542	ONLY: bulk_cloud_model, microphysics_seifert
543
544	USE netcdf_data_input_mod, &
545	ONLY: input_file_static, input_pids_static
546
547
548	IMPLICIT NONE
549
550
551	IF ( canopy_drag_coeff == 0.0_wp ) THEN
552	message_string = 'plant_canopy = .TRUE. requires a non-zero drag '// &
553	'coefficient & given value is canopy_drag_coeff = 0.0'
554	CALL message( 'pcm_check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
555	ENDIF
556
557	IF ( ( alpha_lad /= 9999999.9_wp .AND. beta_lad == 9999999.9_wp ) .OR.&
558	beta_lad /= 9999999.9_wp .AND. alpha_lad == 9999999.9_wp ) THEN
559	message_string = 'using the beta function for the construction ' // &
560	'of the leaf area density profile requires ' // &
561	'both alpha_lad and beta_lad to be /= 9999999.9'
562	CALL message( 'pcm_check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
563	ENDIF
564
565	IF ( calc_beta_lad_profile .AND. lai_beta == 0.0_wp ) THEN
566	message_string = 'using the beta function for the construction ' // &
567	'of the leaf area density profile requires ' // &
568	'a non-zero lai_beta, but given value is ' // &
569	'lai_beta = 0.0'
570	CALL message( 'pcm_check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
571	ENDIF
572
573	IF ( calc_beta_lad_profile .AND. lad_surface /= 0.0_wp ) THEN
574	message_string = 'simultaneous setting of alpha_lad /= 9999999.9 '// &
575	'combined with beta_lad /= 9999999.9 ' // &
576	'and lad_surface /= 0.0 is not possible, ' // &
577	'use either vertical gradients or the beta ' // &
578	'function for the construction of the leaf area '// &
579	'density profile'
580	CALL message( 'pcm_check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
581	ENDIF
582
583	IF ( bulk_cloud_model .AND. microphysics_seifert ) THEN
584	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
585	' seifert_beheng'
586	CALL message( 'pcm_check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
587	ENDIF
588	!
589	!-- If dynamic input file is used, canopy need to be read from file
590	IF ( input_pids_static .AND. &
591	TRIM( canopy_mode ) /= 'read_from_file_3d' ) THEN
592	message_string = 'Usage of dynamic input file ' // &
593	TRIM( input_file_static ) // &
594	TRIM( coupling_char ) // ' requires ' // &
595	'canopy_mode = read_from_file_3d'
596	CALL message( 'pcm_check_parameters', 'PA0999', 1, 2, 0, 6, 0 )
597	ENDIF
598
599
600	END SUBROUTINE pcm_check_parameters
601
602
603	!------------------------------------------------------------------------------!
604	!
605	! Description:
606	! ------------
607	!> Subroutine defining 3D output variables
608	!------------------------------------------------------------------------------!
609	SUBROUTINE pcm_data_output_3d( av, variable, found, local_pf, fill_value, &
610	nzb_do, nzt_do )
611
612	USE indices
613
614	USE kinds
615
616
617	IMPLICIT NONE
618
619	CHARACTER (LEN=*) :: variable !<
620
621	INTEGER(iwp) :: av !<
622	INTEGER(iwp) :: i !<
623	INTEGER(iwp) :: j !<
624	INTEGER(iwp) :: k !<
625	INTEGER(iwp) :: k_topo !< topography top index
626	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
627	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
628
629	LOGICAL :: found !<
630
631	REAL(wp) :: fill_value
632	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
633
634
635	found = .TRUE.
636
637	local_pf = REAL( fill_value, KIND = 4 )
638
639	SELECT CASE ( TRIM( variable ) )
640
641	CASE ( 'pcm_heatrate' )
642	IF ( av == 0 ) THEN
643	DO i = nxl, nxr
644	DO j = nys, nyn
645	IF ( pch_index_ji(j,i) /= 0 ) THEN
646	k_topo = get_topography_top_index_ji( j, i, 's' )
647	DO k = k_topo, k_topo + pch_index_ji(j,i)
648	local_pf(i,j,k) = pc_heating_rate(k-k_topo,j,i)
649	ENDDO
650	ENDIF
651	ENDDO
652	ENDDO
653	ENDIF
654
655	CASE ( 'pcm_transpirationrate' )
656	IF ( av == 0 ) THEN
657	DO i = nxl, nxr
658	DO j = nys, nyn
659	IF ( pch_index_ji(j,i) /= 0 ) THEN
660	k_topo = get_topography_top_index_ji( j, i, 's' )
661	DO k = k_topo, k_topo + pch_index_ji(j,i)
662	local_pf(i,j,k) = pc_transpiration_rate(k-k_topo,j,i)
663	ENDDO
664	ENDIF
665	ENDDO
666	ENDDO
667	ENDIF
668
669	CASE ( 'pcm_latentrate' )
670	IF ( av == 0 ) THEN
671	DO i = nxl, nxr
672	DO j = nys, nyn
673	IF ( pch_index_ji(j,i) /= 0 ) THEN
674	k_topo = get_topography_top_index_ji( j, i, 's' )
675	DO k = k_topo, k_topo + pch_index_ji(j,i)
676	local_pf(i,j,k) = pc_latent_rate(k-k_topo,j,i)
677	ENDDO
678	ENDIF
679	ENDDO
680	ENDDO
681	ENDIF
682
683	CASE ( 'pcm_bowenratio' )
684	IF ( av == 0 ) THEN
685	DO i = nxl, nxr
686	DO j = nys, nyn
687	IF ( pch_index_ji(j,i) /= 0 ) THEN
688	k_topo = get_topography_top_index_ji( j, i, 's' )
689	DO k = k_topo, k_topo + pch_index_ji(j,i)
690	IF ( pc_latent_rate(k-k_topo,j,i) /= 0._wp ) THEN
691	local_pf(i,j,k) = pc_heating_rate(k-k_topo,j,i) / &
692	pc_latent_rate(k-k_topo,j,i)
693	ENDIF
694	ENDDO
695	ENDIF
696	ENDDO
697	ENDDO
698	ENDIF
699
700	CASE ( 'pcm_lad' )
701	IF ( av == 0 ) THEN
702	DO i = nxl, nxr
703	DO j = nys, nyn
704	IF ( pch_index_ji(j,i) /= 0 ) THEN
705	k_topo = get_topography_top_index_ji( j, i, 's' )
706	DO k = k_topo, k_topo + pch_index_ji(j,i)
707	local_pf(i,j,k) = lad_s(k-k_topo,j,i)
708	ENDDO
709	ENDIF
710	ENDDO
711	ENDDO
712	ENDIF
713
714
715	CASE DEFAULT
716	found = .FALSE.
717
718	END SELECT
719
720
721	END SUBROUTINE pcm_data_output_3d
722
723	!------------------------------------------------------------------------------!
724	!
725	! Description:
726	! ------------
727	!> Subroutine defining appropriate grid for netcdf variables.
728	!> It is called from subroutine netcdf.
729	!------------------------------------------------------------------------------!
730	SUBROUTINE pcm_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
731
732	IMPLICIT NONE
733
734	CHARACTER (LEN=*), INTENT(IN) :: var !<
735	LOGICAL, INTENT(OUT) :: found !<
736	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !<
737	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !<
738	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !<
739
740	found = .TRUE.
741
742	!
743	!-- Check for the grid
744	SELECT CASE ( TRIM( var ) )
745
746	CASE ( 'pcm_heatrate', 'pcm_lad', 'pcm_transpirationrate', 'pcm_latentrate', 'pcm_bowenratio')
747	grid_x = 'x'
748	grid_y = 'y'
749	grid_z = 'zu'
750
751	CASE DEFAULT
752	found = .FALSE.
753	grid_x = 'none'
754	grid_y = 'none'
755	grid_z = 'none'
756	END SELECT
757
758	END SUBROUTINE pcm_define_netcdf_grid
759
760
761	!------------------------------------------------------------------------------!
762	! Description:
763	! ------------
764	!> Header output for plant canopy model
765	!------------------------------------------------------------------------------!
766	SUBROUTINE pcm_header ( io )
767
768	USE control_parameters, &
769	ONLY: passive_scalar
770
771
772	IMPLICIT NONE
773
774	CHARACTER (LEN=10) :: coor_chr !<
775
776	CHARACTER (LEN=86) :: coordinates !<
777	CHARACTER (LEN=86) :: gradients !<
778	CHARACTER (LEN=86) :: leaf_area_density !<
779	CHARACTER (LEN=86) :: slices !<
780
781	INTEGER(iwp) :: i !<
782	INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
783	INTEGER(iwp) :: k !<
784
785	REAL(wp) :: canopy_height !< canopy height (in m)
786
787	canopy_height = zw(pch_index)
788
789	WRITE ( io, 1 ) canopy_mode, canopy_height, pch_index, &
790	canopy_drag_coeff
791	IF ( passive_scalar ) THEN
792	WRITE ( io, 2 ) leaf_scalar_exch_coeff, &
793	leaf_surface_conc
794	ENDIF
795
796	!
797	!-- Heat flux at the top of vegetation
798	WRITE ( io, 3 ) cthf
799
800	!
801	!-- Leaf area density profile, calculated either from given vertical
802	!-- gradients or from beta probability density function.
803	IF ( .NOT. calc_beta_lad_profile ) THEN
804
805	!-- Building output strings, starting with surface value
806	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
807	gradients = '------'
808	slices = ' 0'
809	coordinates = ' 0.0'
810	i = 1
811	DO WHILE ( i < 11 .AND. lad_vertical_gradient_level_ind(i) &
812	/= -9999 )
813
814	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
815	leaf_area_density = TRIM( leaf_area_density ) // ' ' // &
816	TRIM( coor_chr )
817
818	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
819	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
820
821	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
822	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
823
824	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
825	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
826
827	i = i + 1
828	ENDDO
829
830	WRITE ( io, 4 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
831	TRIM( gradients ), TRIM( slices )
832
833	ELSE
834
835	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
836	coordinates = ' 0.0'
837
838	DO k = 1, pch_index
839
840	WRITE (coor_chr,'(F7.2)') lad(k)
841	leaf_area_density = TRIM( leaf_area_density ) // ' ' // &
842	TRIM( coor_chr )
843
844	WRITE (coor_chr,'(F7.1)') zu(k)
845	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
846
847	ENDDO
848
849	WRITE ( io, 5 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
850	alpha_lad, beta_lad, lai_beta
851
852	ENDIF
853
854	1 FORMAT (//' Vegetation canopy (drag) model:'/ &
855	' ------------------------------'// &
856	' Canopy mode: ', A / &
857	' Canopy height: ',F6.2,'m (',I4,' grid points)' / &
858	' Leaf drag coefficient: ',F6.2 /)
859	2 FORMAT (/ ' Scalar exchange coefficient: ',F6.2 / &
860	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
861	3 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2, &
862	' K m/s')
863	4 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
864	' Height: ',A,' m'/ &
865	' Leaf area density: ',A,' m2/m3'/ &
866	' Gradient: ',A,' m2/m4'/ &
867	' Gridpoint: ',A)
868	5 FORMAT (//' Characteristic levels of the leaf area density and coefficients:'&
869	// ' Height: ',A,' m'/ &
870	' Leaf area density: ',A,' m2/m3'/ &
871	' Coefficient alpha: ',F6.2 / &
872	' Coefficient beta: ',F6.2 / &
873	' Leaf area index: ',F6.2,' m2/m2' /)
874
875	END SUBROUTINE pcm_header
876
877
878	!------------------------------------------------------------------------------!
879	! Description:
880	! ------------
881	!> Initialization of the plant canopy model
882	!------------------------------------------------------------------------------!
883	SUBROUTINE pcm_init
884
885
886	USE control_parameters, &
887	ONLY: message_string, ocean_mode
888
889	USE netcdf_data_input_mod, &
890	ONLY: leaf_area_density_f
891
892	USE surface_mod, &
893	ONLY: surf_def_h, surf_lsm_h, surf_usm_h
894
895	IMPLICIT NONE
896
897	INTEGER(iwp) :: i !< running index
898	INTEGER(iwp) :: j !< running index
899	INTEGER(iwp) :: k !< running index
900	INTEGER(iwp) :: m !< running index
901	INTEGER(iwp) :: pch_index_l
902
903	REAL(wp) :: int_bpdf !< vertical integral for lad-profile construction
904	REAL(wp) :: gradient !< gradient for lad-profile construction
905	REAL(wp) :: canopy_height !< canopy height for lad-profile construction
906
907	CALL location_message( 'initializing plant canopy model', .FALSE. )
908	!
909	!-- Allocate one-dimensional arrays for the computation of the
910	!-- leaf area density (lad) profile
911	ALLOCATE( lad(0:nz+1), pre_lad(0:nz+1) )
912	lad = 0.0_wp
913	pre_lad = 0.0_wp
914
915	!
916	!-- Set flag that indicates that the lad-profile shall be calculated by using
917	!-- a beta probability density function
918	IF ( alpha_lad /= 9999999.9_wp .AND. beta_lad /= 9999999.9_wp ) THEN
919	calc_beta_lad_profile = .TRUE.
920	ENDIF
921
922
923	!
924	!-- Compute the profile of leaf area density used in the plant
925	!-- canopy model. The profile can either be constructed from
926	!-- prescribed vertical gradients of the leaf area density or by
927	!-- using a beta probability density function (see e.g. Markkanen et al.,
928	!-- 2003: Boundary-Layer Meteorology, 106, 437-459)
929	IF ( .NOT. calc_beta_lad_profile ) THEN
930
931	!
932	!-- Use vertical gradients for lad-profile construction
933	i = 1
934	gradient = 0.0_wp
935
936	IF ( .NOT. ocean_mode ) THEN
937
938	lad(0) = lad_surface
939	lad_vertical_gradient_level_ind(1) = 0
940
941	DO k = 1, pch_index
942	IF ( i < 11 ) THEN
943	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
944	lad_vertical_gradient_level(i) >= 0.0_wp ) THEN
945	gradient = lad_vertical_gradient(i)
946	lad_vertical_gradient_level_ind(i) = k - 1
947	i = i + 1
948	ENDIF
949	ENDIF
950	IF ( gradient /= 0.0_wp ) THEN
951	IF ( k /= 1 ) THEN
952	lad(k) = lad(k-1) + dzu(k) * gradient
953	ELSE
954	lad(k) = lad_surface + dzu(k) * gradient
955	ENDIF
956	ELSE
957	lad(k) = lad(k-1)
958	ENDIF
959	ENDDO
960
961	ENDIF
962
963	!
964	!-- In case of no given leaf area density gradients, choose a vanishing
965	!-- gradient. This information is used for the HEADER and the RUN_CONTROL
966	!-- file.
967	IF ( lad_vertical_gradient_level(1) == -9999999.9_wp ) THEN
968	lad_vertical_gradient_level(1) = 0.0_wp
969	ENDIF
970
971	ELSE
972
973	!
974	!-- Use beta function for lad-profile construction
975	int_bpdf = 0.0_wp
976	canopy_height = zw(pch_index)
977
978	DO k = 0, pch_index
979	int_bpdf = int_bpdf + &
980	( ( ( zw(k) / canopy_height )*( alpha_lad-1.0_wp ) ) &
981	( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
982	beta_lad-1.0_wp ) ) &
983	* ( ( zw(k+1)-zw(k) ) / canopy_height ) )
984	ENDDO
985
986	!
987	!-- Preliminary lad profile (defined on w-grid)
988	DO k = 0, pch_index
989	pre_lad(k) = lai_beta * &
990	( ( ( zw(k) / canopy_height )**( alpha_lad-1.0_wp ) ) &
991	* ( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
992	beta_lad-1.0_wp ) ) / int_bpdf &
993	) / canopy_height
994	ENDDO
995
996	!
997	!-- Final lad profile (defined on scalar-grid level, since most prognostic
998	!-- quantities are defined there, hence, less interpolation is required
999	!-- when calculating the canopy tendencies)
1000	lad(0) = pre_lad(0)
1001	DO k = 1, pch_index
1002	lad(k) = 0.5 * ( pre_lad(k-1) + pre_lad(k) )
1003	ENDDO
1004
1005	ENDIF
1006
1007	!
1008	!-- Allocate 3D-array for the leaf area density (lad_s).
1009	ALLOCATE( lad_s(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1010
1011	!
1012	!-- Initialize canopy parameters cdc (canopy drag coefficient),
1013	!-- lsec (leaf scalar exchange coefficient), lsc (leaf surface concentration)
1014	!-- with the prescribed values
1015	cdc = canopy_drag_coeff
1016	lsec = leaf_scalar_exch_coeff
1017	lsc = leaf_surface_conc
1018
1019	!
1020	!-- Initialization of the canopy coverage in the model domain:
1021	!-- Setting the parameter canopy_mode = 'block' initializes a canopy, which
1022	!-- fully covers the domain surface
1023	SELECT CASE ( TRIM( canopy_mode ) )
1024
1025	CASE( 'block' )
1026
1027	DO i = nxlg, nxrg
1028	DO j = nysg, nyng
1029	lad_s(:,j,i) = lad(:)
1030	ENDDO
1031	ENDDO
1032
1033	CASE ( 'read_from_file_3d' )
1034	!
1035	!-- Initialize LAD with data from file. If LAD is given in NetCDF file,
1036	!-- use these values, else take LAD profiles from ASCII file.
1037	!-- Please note, in NetCDF file LAD is only given up to the maximum
1038	!-- canopy top, indicated by leaf_area_density_f%nz.
1039	lad_s = 0.0_wp
1040	IF ( leaf_area_density_f%from_file ) THEN
1041	!
1042	!-- Set also pch_index, used to be the upper bound of the vertical
1043	!-- loops. Therefore, use the global top of the canopy layer.
1044	pch_index = leaf_area_density_f%nz - 1
1045
1046	DO i = nxl, nxr
1047	DO j = nys, nyn
1048	DO k = 0, leaf_area_density_f%nz - 1
1049	IF ( leaf_area_density_f%var(k,j,i) /= &
1050	leaf_area_density_f%fill ) &
1051	lad_s(k,j,i) = leaf_area_density_f%var(k,j,i)
1052	ENDDO
1053	ENDDO
1054	ENDDO
1055	CALL exchange_horiz( lad_s, nbgp )
1056	!
1057	! ASCII file
1058	!-- Initialize canopy parameters cdc (canopy drag coefficient),
1059	!-- lsec (leaf scalar exchange coefficient), lsc (leaf surface concentration)
1060	!-- from file which contains complete 3D data (separate vertical profiles for
1061	!-- each location).
1062	ELSE
1063	CALL pcm_read_plant_canopy_3d
1064	ENDIF
1065
1066	CASE DEFAULT
1067	!
1068	!-- The DEFAULT case is reached either if the parameter
1069	!-- canopy mode contains a wrong character string or if the
1070	!-- user has coded a special case in the user interface.
1071	!-- There, the subroutine user_init_plant_canopy checks
1072	!-- which of these two conditions applies.
1073	CALL user_init_plant_canopy
1074
1075	END SELECT
1076	!
1077	!-- Initialize 2D index array indicating canopy top index.
1078	ALLOCATE( pch_index_ji(nysg:nyng,nxlg:nxrg) )
1079	pch_index_ji = 0
1080
1081	DO i = nxl, nxr
1082	DO j = nys, nyn
1083	DO k = 0, pch_index
1084	IF ( lad_s(k,j,i) /= 0 ) pch_index_ji(j,i) = k
1085	ENDDO
1086	!
1087	!-- Check whether topography and local vegetation on top exceed
1088	!-- height of the model domain.
1089	k = get_topography_top_index_ji( j, i, 's' )
1090	IF ( k + pch_index_ji(j,i) >= nzt + 1 ) THEN
1091	message_string = 'Local vegetation height on top of ' // &
1092	'topography exceeds height of model domain.'
1093	CALL message( 'pcm_init', 'PA0999', 2, 2, 0, 6, 0 )
1094	ENDIF
1095
1096	ENDDO
1097	ENDDO
1098
1099	CALL exchange_horiz_2d_int( pch_index_ji, nys, nyn, nxl, nxr, nbgp )
1100	!
1101	!-- Calculate global pch_index value (index of top of plant canopy from ground)
1102	pch_index = MAXVAL( pch_index_ji )
1103	!
1104	!-- Exchange pch_index from all processors
1105	#if defined( __parallel )
1106	CALL MPI_ALLREDUCE( MPI_IN_PLACE, pch_index, 1, MPI_INTEGER, &
1107	MPI_MAX, comm2d, ierr)
1108	#endif
1109
1110	!-- Allocation of arrays pc_heating_rate, pc_transpiration_rate and pc_latent_rate
1111	ALLOCATE( pc_heating_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1112	IF ( humidity ) THEN
1113	ALLOCATE( pc_transpiration_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1114	pc_transpiration_rate = 0.0_wp
1115	ALLOCATE( pc_latent_rate(0:pch_index,nysg:nyng,nxlg:nxrg) )
1116	pc_latent_rate = 0.0_wp
1117	ENDIF
1118
1119	!
1120	!-- Initialization of the canopy heat source distribution due to heating
1121	!-- of the canopy layers by incoming solar radiation, in case that a non-zero
1122	!-- value is set for the canopy top heat flux (cthf), which equals the
1123	!-- available net radiation at canopy top.
1124	!-- The heat source distribution is calculated by a decaying exponential
1125	!-- function of the downward cumulative leaf area index (cum_lai_hf),
1126	!-- assuming that the foliage inside the plant canopy is heated by solar
1127	!-- radiation penetrating the canopy layers according to the distribution
1128	!-- of net radiation as suggested by Brown & Covey (1966; Agric. Meteorol. 3,
1129	!-- 73â96). This approach has been applied e.g. by Shaw & Schumann (1992;
1130	!-- Bound.-Layer Meteorol. 61, 47â64).
1131	!-- When using the radiation_interactions, canopy heating (pc_heating_rate)
1132	!-- and plant canopy transpiration (pc_transpiration_rate, pc_latent_rate)
1133	!-- are calculated in the RTM after the calculation of radiation.
1134	!-- We cannot use variable radiation_interactions here to determine the situation
1135	!-- as it is assigned in init_3d_model after the call of pcm_init.
1136	IF ( cthf /= 0.0_wp ) THEN
1137
1138	ALLOCATE( cum_lai_hf(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
1139	!
1140	!-- Piecewise calculation of the cumulative leaf area index by vertical
1141	!-- integration of the leaf area density
1142	cum_lai_hf(:,:,:) = 0.0_wp
1143	DO i = nxlg, nxrg
1144	DO j = nysg, nyng
1145	DO k = pch_index_ji(j,i)-1, 0, -1
1146	IF ( k == pch_index_ji(j,i)-1 ) THEN
1147	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
1148	( 0.5_wp * lad_s(k+1,j,i) * &
1149	( zw(k+1) - zu(k+1) ) ) + &
1150	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
1151	lad_s(k,j,i) ) + &
1152	lad_s(k+1,j,i) ) * &
1153	( zu(k+1) - zw(k) ) )
1154	ELSE
1155	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
1156	( 0.5_wp * ( 0.5_wp * ( lad_s(k+2,j,i) + &
1157	lad_s(k+1,j,i) ) + &
1158	lad_s(k+1,j,i) ) * &
1159	( zw(k+1) - zu(k+1) ) ) + &
1160	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
1161	lad_s(k,j,i) ) + &
1162	lad_s(k+1,j,i) ) * &
1163	( zu(k+1) - zw(k) ) )
1164	ENDIF
1165	ENDDO
1166	ENDDO
1167	ENDDO
1168
1169	!
1170	!-- In areas with canopy the surface value of the canopy heat
1171	!-- flux distribution overrides the surface heat flux (shf)
1172	!-- Start with default surface type
1173	DO m = 1, surf_def_h(0)%ns
1174	k = surf_def_h(0)%k(m)
1175	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1176	surf_def_h(0)%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1177	ENDDO
1178	!
1179	!-- Natural surfaces
1180	DO m = 1, surf_lsm_h%ns
1181	k = surf_lsm_h%k(m)
1182	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1183	surf_lsm_h%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1184	ENDDO
1185	!
1186	!-- Urban surfaces
1187	DO m = 1, surf_usm_h%ns
1188	k = surf_usm_h%k(m)
1189	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
1190	surf_usm_h%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
1191	ENDDO
1192	!
1193	!
1194	!-- Calculation of the heating rate (K/s) within the different layers of
1195	!-- the plant canopy. Calculation is only necessary in areas covered with
1196	!-- canopy.
1197	!-- Within the different canopy layers the plant-canopy heating
1198	!-- rate (pc_heating_rate) is calculated as the vertical
1199	!-- divergence of the canopy heat fluxes at the top and bottom
1200	!-- of the respective layer
1201	DO i = nxlg, nxrg
1202	DO j = nysg, nyng
1203	DO k = 1, pch_index_ji(j,i)
1204	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) THEN
1205	pc_heating_rate(k,j,i) = cthf * &
1206	( exp(-ext_coef*cum_lai_hf(k,j,i)) - &
1207	exp(-ext_coef*cum_lai_hf(k-1,j,i) ) ) / dzw(k)
1208	ENDIF
1209	ENDDO
1210	ENDDO
1211	ENDDO
1212
1213	ENDIF
1214
1215	CALL location_message( 'finished', .TRUE. )
1216
1217
1218	END SUBROUTINE pcm_init
1219
1220
1221	!------------------------------------------------------------------------------!
1222	! Description:
1223	! ------------
1224	!> Parin for &plant_canopy_parameters for plant canopy model
1225	!------------------------------------------------------------------------------!
1226	SUBROUTINE pcm_parin
1227
1228	USE control_parameters, &
1229	ONLY: message_string, plant_canopy
1230
1231	IMPLICIT NONE
1232
1233	CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file
1234
1235	NAMELIST /plant_canopy_parameters/ &
1236	alpha_lad, beta_lad, canopy_drag_coeff, &
1237	canopy_mode, cthf, &
1238	lad_surface, lad_type_coef, &
1239	lad_vertical_gradient, &
1240	lad_vertical_gradient_level, &
1241	lai_beta, &
1242	leaf_scalar_exch_coeff, &
1243	leaf_surface_conc, pch_index, &
1244	plant_canopy_transpiration
1245
1246	NAMELIST /canopy_par/ alpha_lad, beta_lad, canopy_drag_coeff, &
1247	canopy_mode, cthf, &
1248	lad_surface, lad_type_coef, &
1249	lad_vertical_gradient, &
1250	lad_vertical_gradient_level, &
1251	lai_beta, &
1252	leaf_scalar_exch_coeff, &
1253	leaf_surface_conc, pch_index, &
1254	plant_canopy_transpiration
1255
1256	line = ' '
1257
1258	!
1259	!-- Try to find radiation model package
1260	REWIND ( 11 )
1261	line = ' '
1262	DO WHILE ( INDEX( line, '&plant_canopy_parameters' ) == 0 )
1263	READ ( 11, '(A)', END=12 ) line
1264	ENDDO
1265	BACKSPACE ( 11 )
1266
1267	!
1268	!-- Read user-defined namelist
1269	READ ( 11, plant_canopy_parameters, ERR = 10 )
1270
1271	!
1272	!-- Set flag that indicates that the radiation model is switched on
1273	plant_canopy = .TRUE.
1274
1275	GOTO 14
1276
1277	10 BACKSPACE( 11 )
1278	READ( 11 , '(A)') line
1279	CALL parin_fail_message( 'plant_canopy_parameters', line )
1280	!
1281	!-- Try to find old namelist
1282	12 REWIND ( 11 )
1283	line = ' '
1284	DO WHILE ( INDEX( line, '&canopy_par' ) == 0 )
1285	READ ( 11, '(A)', END=14 ) line
1286	ENDDO
1287	BACKSPACE ( 11 )
1288
1289	!
1290	!-- Read user-defined namelist
1291	READ ( 11, canopy_par, ERR = 13, END = 14 )
1292
1293	message_string = 'namelist canopy_par is deprecated and will be ' // &
1294	'removed in near future. Please use namelist ' // &
1295	'plant_canopy_parameters instead'
1296	CALL message( 'pcm_parin', 'PA0487', 0, 1, 0, 6, 0 )
1297
1298	!
1299	!-- Set flag that indicates that the radiation model is switched on
1300	plant_canopy = .TRUE.
1301
1302	GOTO 14
1303
1304	13 BACKSPACE( 11 )
1305	READ( 11 , '(A)') line
1306	CALL parin_fail_message( 'canopy_par', line )
1307
1308	14 CONTINUE
1309
1310
1311	END SUBROUTINE pcm_parin
1312
1313
1314
1315	!------------------------------------------------------------------------------!
1316	! Description:
1317	! ------------
1318	!
1319	!> Loads 3D plant canopy data from file. File format is as follows:
1320	!>
1321	!> num_levels
1322	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1323	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1324	!> dtype,x,y,pctype,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1325	!> ...
1326	!>
1327	!> i.e. first line determines number of levels and further lines represent plant
1328	!> canopy data, one line per column and variable. In each data line,
1329	!> dtype represents variable to be set:
1330	!>
1331	!> dtype=1: leaf area density (lad_s)
1332	!> dtype=2....n: some additional plant canopy input data quantity
1333	!>
1334	!> Zeros are added automatically above num_levels until top of domain. Any
1335	!> non-specified (x,y) columns have zero values as default.
1336	!------------------------------------------------------------------------------!
1337	SUBROUTINE pcm_read_plant_canopy_3d
1338
1339	USE control_parameters, &
1340	ONLY: coupling_char, message_string
1341
1342	USE indices, &
1343	ONLY: nbgp
1344
1345	IMPLICIT NONE
1346
1347	INTEGER(iwp) :: dtype !< type of input data (1=lad)
1348	INTEGER(iwp) :: pctype !< type of plant canopy (deciduous,non-deciduous,...)
1349	INTEGER(iwp) :: i, j !< running index
1350	INTEGER(iwp) :: nzp !< number of vertical layers of plant canopy
1351	INTEGER(iwp) :: nzpltop !<
1352	INTEGER(iwp) :: nzpl !<
1353	INTEGER(iwp) :: kk !<
1354
1355	REAL(wp), DIMENSION(:), ALLOCATABLE :: col !< vertical column of input data
1356
1357	!
1358	!-- Initialize lad_s array
1359	lad_s = 0.0_wp
1360
1361	!
1362	!-- Open and read plant canopy input data
1363	OPEN(152, FILE='PLANT_CANOPY_DATA_3D' // TRIM( coupling_char ), &
1364	ACCESS='SEQUENTIAL', ACTION='READ', STATUS='OLD', &
1365	FORM='FORMATTED', ERR=515)
1366	READ(152, *, ERR=516, END=517) nzp !< read first line = number of vertical layers
1367	nzpltop = MIN(nzt+1, nzb+nzp-1)
1368	nzpl = nzpltop - nzb + 1 !< no. of layers to assign
1369	ALLOCATE( col(0:nzp-1) )
1370
1371	DO
1372	READ(152, *, ERR=516, END=517) dtype, i, j, pctype, col(:)
1373	IF ( i < nxlg .OR. i > nxrg .OR. j < nysg .OR. j > nyng ) CYCLE
1374
1375	SELECT CASE (dtype)
1376	CASE( 1 ) !< leaf area density
1377	!
1378	!-- This is just the pure canopy layer assumed to be grounded to
1379	!-- a flat domain surface. At locations where plant canopy sits
1380	!-- on top of any kind of topography, the vertical plant column
1381	!-- must be "lifted", which is done in SUBROUTINE pcm_tendency.
1382	IF ( pctype < 0 .OR. pctype > 10 ) THEN !< incorrect plant canopy type
1383	WRITE( message_string, * ) 'Incorrect type of plant canopy. ' // &
1384	'Allowed values 0 <= pctype <= 10, ' // &
1385	'but pctype is ', pctype
1386	CALL message( 'pcm_read_plant_canopy_3d', 'PA0349', 1, 2, 0, 6, 0 )
1387	ENDIF
1388	kk = get_topography_top_index_ji( j, i, 's' )
1389	lad_s(nzb:nzpltop-kk, j, i) = col(kk:nzpl-1)*lad_type_coef(pctype)
1390	CASE DEFAULT
1391	WRITE(message_string, '(a,i2,a)') &
1392	'Unknown record type in file PLANT_CANOPY_DATA_3D: "', dtype, '"'
1393	CALL message( 'pcm_read_plant_canopy_3d', 'PA0530', 1, 2, 0, 6, 0 )
1394	END SELECT
1395	ENDDO
1396
1397	515 message_string = 'error opening file PLANT_CANOPY_DATA_3D'
1398	CALL message( 'pcm_read_plant_canopy_3d', 'PA0531', 1, 2, 0, 6, 0 )
1399
1400	516 message_string = 'error reading file PLANT_CANOPY_DATA_3D'
1401	CALL message( 'pcm_read_plant_canopy_3d', 'PA0532', 1, 2, 0, 6, 0 )
1402
1403	517 CLOSE(152)
1404	DEALLOCATE( col )
1405
1406	CALL exchange_horiz( lad_s, nbgp )
1407
1408	END SUBROUTINE pcm_read_plant_canopy_3d
1409
1410
1411
1412	!------------------------------------------------------------------------------!
1413	! Description:
1414	! ------------
1415	!> Calculation of the tendency terms, accounting for the effect of the plant
1416	!> canopy on momentum and scalar quantities.
1417	!>
1418	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
1419	!> (defined on scalar grid), as initialized in subroutine pcm_init.
1420	!> The lad on the w-grid is vertically interpolated from the surrounding
1421	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
1422	!> k = pch_index. Here, the lad is zero.
1423	!>
1424	!> The canopy drag must be limited (previously accounted for by calculation of
1425	!> a limiting canopy timestep for the determination of the maximum LES timestep
1426	!> in subroutine timestep), since it is physically impossible that the canopy
1427	!> drag alone can locally change the sign of a velocity component. This
1428	!> limitation is realized by calculating preliminary tendencies and velocities.
1429	!> It is subsequently checked if the preliminary new velocity has a different
1430	!> sign than the current velocity. If so, the tendency is limited in a way that
1431	!> the velocity can at maximum be reduced to zero by the canopy drag.
1432	!>
1433	!>
1434	!> Call for all grid points
1435	!------------------------------------------------------------------------------!
1436	SUBROUTINE pcm_tendency( component )
1437
1438
1439	USE control_parameters, &
1440	ONLY: dt_3d, message_string
1441
1442	USE kinds
1443
1444	IMPLICIT NONE
1445
1446	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
1447	INTEGER(iwp) :: i !< running index
1448	INTEGER(iwp) :: j !< running index
1449	INTEGER(iwp) :: k !< running index
1450	INTEGER(iwp) :: k_wall !< vertical index of topography top
1451	INTEGER(iwp) :: kk !< running index for flat lad arrays
1452
1453	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
1454	REAL(wp) :: lad_local !< local lad value
1455	REAL(wp) :: pre_tend !< preliminary tendency
1456	REAL(wp) :: pre_u !< preliminary u-value
1457	REAL(wp) :: pre_v !< preliminary v-value
1458	REAL(wp) :: pre_w !< preliminary w-value
1459
1460
1461	ddt_3d = 1.0_wp / dt_3d
1462
1463	!
1464	!-- Compute drag for the three velocity components and the SGS-TKE:
1465	SELECT CASE ( component )
1466
1467	!
1468	!-- u-component
1469	CASE ( 1 )
1470	DO i = nxlu, nxr
1471	DO j = nys, nyn
1472	!
1473	!-- Determine topography-top index on u-grid
1474	k_wall = get_topography_top_index_ji( j, i, 'u' )
1475	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1476
1477	kk = k - k_wall !- lad arrays are defined flat
1478	!
1479	!-- In order to create sharp boundaries of the plant canopy,
1480	!-- the lad on the u-grid at index (k,j,i) is equal to
1481	!-- lad_s(k,j,i), rather than being interpolated from the
1482	!-- surrounding lad_s, because this would yield smaller lad
1483	!-- at the canopy boundaries than inside of the canopy.
1484	!-- For the same reason, the lad at the rightmost(i+1)canopy
1485	!-- boundary on the u-grid equals lad_s(k,j,i).
1486	lad_local = lad_s(kk,j,i)
1487	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp )&
1488	THEN
1489	lad_local = lad_s(kk,j,i-1)
1490	ENDIF
1491
1492	pre_tend = 0.0_wp
1493	pre_u = 0.0_wp
1494	!
1495	!-- Calculate preliminary value (pre_tend) of the tendency
1496	pre_tend = - cdc * &
1497	lad_local * &
1498	SQRT( u(k,j,i)**2 + &
1499	( 0.25_wp * ( v(k,j,i-1) + &
1500	v(k,j,i) + &
1501	v(k,j+1,i) + &
1502	v(k,j+1,i-1) ) &
1503	)**2 + &
1504	( 0.25_wp * ( w(k-1,j,i-1) + &
1505	w(k-1,j,i) + &
1506	w(k,j,i-1) + &
1507	w(k,j,i) ) &
1508	)**2 &
1509	) * &
1510	u(k,j,i)
1511
1512	!
1513	!-- Calculate preliminary new velocity, based on pre_tend
1514	pre_u = u(k,j,i) + dt_3d * pre_tend
1515	!
1516	!-- Compare sign of old velocity and new preliminary velocity,
1517	!-- and in case the signs are different, limit the tendency
1518	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
1519	pre_tend = - u(k,j,i) * ddt_3d
1520	ELSE
1521	pre_tend = pre_tend
1522	ENDIF
1523	!
1524	!-- Calculate final tendency
1525	tend(k,j,i) = tend(k,j,i) + pre_tend
1526
1527	ENDDO
1528	ENDDO
1529	ENDDO
1530
1531	!
1532	!-- v-component
1533	CASE ( 2 )
1534	DO i = nxl, nxr
1535	DO j = nysv, nyn
1536	!
1537	!-- Determine topography-top index on v-grid
1538	k_wall = get_topography_top_index_ji( j, i, 'v' )
1539
1540	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1541
1542	kk = k - k_wall !- lad arrays are defined flat
1543	!
1544	!-- In order to create sharp boundaries of the plant canopy,
1545	!-- the lad on the v-grid at index (k,j,i) is equal to
1546	!-- lad_s(k,j,i), rather than being interpolated from the
1547	!-- surrounding lad_s, because this would yield smaller lad
1548	!-- at the canopy boundaries than inside of the canopy.
1549	!-- For the same reason, the lad at the northmost(j+1) canopy
1550	!-- boundary on the v-grid equals lad_s(k,j,i).
1551	lad_local = lad_s(kk,j,i)
1552	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp )&
1553	THEN
1554	lad_local = lad_s(kk,j-1,i)
1555	ENDIF
1556
1557	pre_tend = 0.0_wp
1558	pre_v = 0.0_wp
1559	!
1560	!-- Calculate preliminary value (pre_tend) of the tendency
1561	pre_tend = - cdc * &
1562	lad_local * &
1563	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
1564	u(k,j-1,i+1) + &
1565	u(k,j,i) + &
1566	u(k,j,i+1) ) &
1567	)**2 + &
1568	v(k,j,i)**2 + &
1569	( 0.25_wp * ( w(k-1,j-1,i) + &
1570	w(k-1,j,i) + &
1571	w(k,j-1,i) + &
1572	w(k,j,i) ) &
1573	)**2 &
1574	) * &
1575	v(k,j,i)
1576
1577	!
1578	!-- Calculate preliminary new velocity, based on pre_tend
1579	pre_v = v(k,j,i) + dt_3d * pre_tend
1580	!
1581	!-- Compare sign of old velocity and new preliminary velocity,
1582	!-- and in case the signs are different, limit the tendency
1583	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
1584	pre_tend = - v(k,j,i) * ddt_3d
1585	ELSE
1586	pre_tend = pre_tend
1587	ENDIF
1588	!
1589	!-- Calculate final tendency
1590	tend(k,j,i) = tend(k,j,i) + pre_tend
1591
1592	ENDDO
1593	ENDDO
1594	ENDDO
1595
1596	!
1597	!-- w-component
1598	CASE ( 3 )
1599	DO i = nxl, nxr
1600	DO j = nys, nyn
1601	!
1602	!-- Determine topography-top index on w-grid
1603	k_wall = get_topography_top_index_ji( j, i, 'w' )
1604
1605	DO k = k_wall+1, k_wall + pch_index_ji(j,i) - 1
1606
1607	kk = k - k_wall !- lad arrays are defined flat
1608
1609	pre_tend = 0.0_wp
1610	pre_w = 0.0_wp
1611	!
1612	!-- Calculate preliminary value (pre_tend) of the tendency
1613	pre_tend = - cdc * &
1614	(0.5_wp * &
1615	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
1616	SQRT( ( 0.25_wp * ( u(k,j,i) + &
1617	u(k,j,i+1) + &
1618	u(k+1,j,i) + &
1619	u(k+1,j,i+1) ) &
1620	)**2 + &
1621	( 0.25_wp * ( v(k,j,i) + &
1622	v(k,j+1,i) + &
1623	v(k+1,j,i) + &
1624	v(k+1,j+1,i) ) &
1625	)**2 + &
1626	w(k,j,i)**2 &
1627	) * &
1628	w(k,j,i)
1629	!
1630	!-- Calculate preliminary new velocity, based on pre_tend
1631	pre_w = w(k,j,i) + dt_3d * pre_tend
1632	!
1633	!-- Compare sign of old velocity and new preliminary velocity,
1634	!-- and in case the signs are different, limit the tendency
1635	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
1636	pre_tend = - w(k,j,i) * ddt_3d
1637	ELSE
1638	pre_tend = pre_tend
1639	ENDIF
1640	!
1641	!-- Calculate final tendency
1642	tend(k,j,i) = tend(k,j,i) + pre_tend
1643
1644	ENDDO
1645	ENDDO
1646	ENDDO
1647
1648	!
1649	!-- potential temperature
1650	CASE ( 4 )
1651	IF ( humidity ) THEN
1652	DO i = nxl, nxr
1653	DO j = nys, nyn
1654	!-- Determine topography-top index on scalar-grid
1655	k_wall = get_topography_top_index_ji( j, i, 's' )
1656	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1657	kk = k - k_wall !- lad arrays are defined flat
1658	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i) - pc_latent_rate(kk,j,i)
1659	ENDDO
1660	ENDDO
1661	ENDDO
1662	ELSE
1663	DO i = nxl, nxr
1664	DO j = nys, nyn
1665	!-- Determine topography-top index on scalar-grid
1666	k_wall = get_topography_top_index_ji( j, i, 's' )
1667	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1668	kk = k - k_wall !- lad arrays are defined flat
1669	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i)
1670	ENDDO
1671	ENDDO
1672	ENDDO
1673	ENDIF
1674
1675	!
1676	!-- humidity
1677	CASE ( 5 )
1678	DO i = nxl, nxr
1679	DO j = nys, nyn
1680	!
1681	!-- Determine topography-top index on scalar-grid
1682	k_wall = get_topography_top_index_ji( j, i, 's' )
1683
1684	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1685
1686	kk = k - k_wall !- lad arrays are defined flat
1687
1688	IF ( .NOT. plant_canopy_transpiration ) THEN
1689	! pc_transpiration_rate is calculated in radiation model
1690	! in case of plant_canopy_transpiration = .T.
1691	! to include also the dependecy to the radiation
1692	! in the plant canopy box
1693	pc_transpiration_rate(kk,j,i) = - lsec &
1694	* lad_s(kk,j,i) * &
1695	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1696	u(k,j,i+1) ) &
1697	)**2 + &
1698	( 0.5_wp * ( v(k,j,i) + &
1699	v(k,j+1,i) ) &
1700	)**2 + &
1701	( 0.5_wp * ( w(k-1,j,i) + &
1702	w(k,j,i) ) &
1703	)**2 &
1704	) * &
1705	( q(k,j,i) - lsc )
1706	ENDIF
1707
1708	tend(k,j,i) = tend(k,j,i) + pc_transpiration_rate(kk,j,i)
1709	ENDDO
1710	ENDDO
1711	ENDDO
1712
1713	!
1714	!-- sgs-tke
1715	CASE ( 6 )
1716	DO i = nxl, nxr
1717	DO j = nys, nyn
1718	!
1719	!-- Determine topography-top index on scalar-grid
1720	k_wall = get_topography_top_index_ji( j, i, 's' )
1721
1722	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1723
1724	kk = k - k_wall !- lad arrays are defined flat
1725	tend(k,j,i) = tend(k,j,i) - &
1726	2.0_wp * cdc * &
1727	lad_s(kk,j,i) * &
1728	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1729	u(k,j,i+1) ) &
1730	)**2 + &
1731	( 0.5_wp * ( v(k,j,i) + &
1732	v(k,j+1,i) ) &
1733	)**2 + &
1734	( 0.5_wp * ( w(k,j,i) + &
1735	w(k+1,j,i) ) &
1736	)**2 &
1737	) * &
1738	e(k,j,i)
1739	ENDDO
1740	ENDDO
1741	ENDDO
1742	!
1743	!-- scalar concentration
1744	CASE ( 7 )
1745	DO i = nxl, nxr
1746	DO j = nys, nyn
1747	!
1748	!-- Determine topography-top index on scalar-grid
1749	k_wall = get_topography_top_index_ji( j, i, 's' )
1750
1751	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1752
1753	kk = k - k_wall !- lad arrays are defined flat
1754	tend(k,j,i) = tend(k,j,i) - &
1755	lsec * &
1756	lad_s(kk,j,i) * &
1757	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1758	u(k,j,i+1) ) &
1759	)**2 + &
1760	( 0.5_wp * ( v(k,j,i) + &
1761	v(k,j+1,i) ) &
1762	)**2 + &
1763	( 0.5_wp * ( w(k-1,j,i) + &
1764	w(k,j,i) ) &
1765	)**2 &
1766	) * &
1767	( s(k,j,i) - lsc )
1768	ENDDO
1769	ENDDO
1770	ENDDO
1771
1772
1773
1774	CASE DEFAULT
1775
1776	WRITE( message_string, * ) 'wrong component: ', component
1777	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
1778
1779	END SELECT
1780
1781	END SUBROUTINE pcm_tendency
1782
1783
1784	!------------------------------------------------------------------------------!
1785	! Description:
1786	! ------------
1787	!> Calculation of the tendency terms, accounting for the effect of the plant
1788	!> canopy on momentum and scalar quantities.
1789	!>
1790	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
1791	!> (defined on scalar grid), as initialized in subroutine pcm_init.
1792	!> The lad on the w-grid is vertically interpolated from the surrounding
1793	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
1794	!> k = pch_index. Here, the lad is zero.
1795	!>
1796	!> The canopy drag must be limited (previously accounted for by calculation of
1797	!> a limiting canopy timestep for the determination of the maximum LES timestep
1798	!> in subroutine timestep), since it is physically impossible that the canopy
1799	!> drag alone can locally change the sign of a velocity component. This
1800	!> limitation is realized by calculating preliminary tendencies and velocities.
1801	!> It is subsequently checked if the preliminary new velocity has a different
1802	!> sign than the current velocity. If so, the tendency is limited in a way that
1803	!> the velocity can at maximum be reduced to zero by the canopy drag.
1804	!>
1805	!>
1806	!> Call for grid point i,j
1807	!------------------------------------------------------------------------------!
1808	SUBROUTINE pcm_tendency_ij( i, j, component )
1809
1810
1811	USE control_parameters, &
1812	ONLY: dt_3d, message_string
1813
1814	USE kinds
1815
1816	IMPLICIT NONE
1817
1818	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
1819	INTEGER(iwp) :: i !< running index
1820	INTEGER(iwp) :: j !< running index
1821	INTEGER(iwp) :: k !< running index
1822	INTEGER(iwp) :: k_wall !< vertical index of topography top
1823	INTEGER(iwp) :: kk !< running index for flat lad arrays
1824
1825	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
1826	REAL(wp) :: lad_local !< local lad value
1827	REAL(wp) :: pre_tend !< preliminary tendency
1828	REAL(wp) :: pre_u !< preliminary u-value
1829	REAL(wp) :: pre_v !< preliminary v-value
1830	REAL(wp) :: pre_w !< preliminary w-value
1831
1832
1833	ddt_3d = 1.0_wp / dt_3d
1834	!
1835	!-- Compute drag for the three velocity components and the SGS-TKE
1836	SELECT CASE ( component )
1837
1838	!
1839	!-- u-component
1840	CASE ( 1 )
1841	!
1842	!-- Determine topography-top index on u-grid
1843	k_wall = get_topography_top_index_ji( j, i, 'u' )
1844	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1845
1846	kk = k - k_wall !- lad arrays are defined flat
1847
1848	!
1849	!-- In order to create sharp boundaries of the plant canopy,
1850	!-- the lad on the u-grid at index (k,j,i) is equal to lad_s(k,j,i),
1851	!-- rather than being interpolated from the surrounding lad_s,
1852	!-- because this would yield smaller lad at the canopy boundaries
1853	!-- than inside of the canopy.
1854	!-- For the same reason, the lad at the rightmost(i+1)canopy
1855	!-- boundary on the u-grid equals lad_s(k,j,i).
1856	lad_local = lad_s(kk,j,i)
1857	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp ) THEN
1858	lad_local = lad_s(kk,j,i-1)
1859	ENDIF
1860
1861	pre_tend = 0.0_wp
1862	pre_u = 0.0_wp
1863	!
1864	!-- Calculate preliminary value (pre_tend) of the tendency
1865	pre_tend = - cdc * &
1866	lad_local * &
1867	SQRT( u(k,j,i)**2 + &
1868	( 0.25_wp * ( v(k,j,i-1) + &
1869	v(k,j,i) + &
1870	v(k,j+1,i) + &
1871	v(k,j+1,i-1) ) &
1872	)**2 + &
1873	( 0.25_wp * ( w(k-1,j,i-1) + &
1874	w(k-1,j,i) + &
1875	w(k,j,i-1) + &
1876	w(k,j,i) ) &
1877	)**2 &
1878	) * &
1879	u(k,j,i)
1880
1881	!
1882	!-- Calculate preliminary new velocity, based on pre_tend
1883	pre_u = u(k,j,i) + dt_3d * pre_tend
1884	!
1885	!-- Compare sign of old velocity and new preliminary velocity,
1886	!-- and in case the signs are different, limit the tendency
1887	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
1888	pre_tend = - u(k,j,i) * ddt_3d
1889	ELSE
1890	pre_tend = pre_tend
1891	ENDIF
1892	!
1893	!-- Calculate final tendency
1894	tend(k,j,i) = tend(k,j,i) + pre_tend
1895	ENDDO
1896
1897
1898	!
1899	!-- v-component
1900	CASE ( 2 )
1901	!
1902	!-- Determine topography-top index on v-grid
1903	k_wall = get_topography_top_index_ji( j, i, 'v' )
1904
1905	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1906
1907	kk = k - k_wall !- lad arrays are defined flat
1908	!
1909	!-- In order to create sharp boundaries of the plant canopy,
1910	!-- the lad on the v-grid at index (k,j,i) is equal to lad_s(k,j,i),
1911	!-- rather than being interpolated from the surrounding lad_s,
1912	!-- because this would yield smaller lad at the canopy boundaries
1913	!-- than inside of the canopy.
1914	!-- For the same reason, the lad at the northmost(j+1)canopy
1915	!-- boundary on the v-grid equals lad_s(k,j,i).
1916	lad_local = lad_s(kk,j,i)
1917	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp ) THEN
1918	lad_local = lad_s(kk,j-1,i)
1919	ENDIF
1920
1921	pre_tend = 0.0_wp
1922	pre_v = 0.0_wp
1923	!
1924	!-- Calculate preliminary value (pre_tend) of the tendency
1925	pre_tend = - cdc * &
1926	lad_local * &
1927	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
1928	u(k,j-1,i+1) + &
1929	u(k,j,i) + &
1930	u(k,j,i+1) ) &
1931	)**2 + &
1932	v(k,j,i)**2 + &
1933	( 0.25_wp * ( w(k-1,j-1,i) + &
1934	w(k-1,j,i) + &
1935	w(k,j-1,i) + &
1936	w(k,j,i) ) &
1937	)**2 &
1938	) * &
1939	v(k,j,i)
1940
1941	!
1942	!-- Calculate preliminary new velocity, based on pre_tend
1943	pre_v = v(k,j,i) + dt_3d * pre_tend
1944	!
1945	!-- Compare sign of old velocity and new preliminary velocity,
1946	!-- and in case the signs are different, limit the tendency
1947	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
1948	pre_tend = - v(k,j,i) * ddt_3d
1949	ELSE
1950	pre_tend = pre_tend
1951	ENDIF
1952	!
1953	!-- Calculate final tendency
1954	tend(k,j,i) = tend(k,j,i) + pre_tend
1955	ENDDO
1956
1957
1958	!
1959	!-- w-component
1960	CASE ( 3 )
1961	!
1962	!-- Determine topography-top index on w-grid
1963	k_wall = get_topography_top_index_ji( j, i, 'w' )
1964
1965	DO k = k_wall + 1, k_wall + pch_index_ji(j,i) - 1
1966
1967	kk = k - k_wall !- lad arrays are defined flat
1968
1969	pre_tend = 0.0_wp
1970	pre_w = 0.0_wp
1971	!
1972	!-- Calculate preliminary value (pre_tend) of the tendency
1973	pre_tend = - cdc * &
1974	(0.5_wp * &
1975	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
1976	SQRT( ( 0.25_wp * ( u(k,j,i) + &
1977	u(k,j,i+1) + &
1978	u(k+1,j,i) + &
1979	u(k+1,j,i+1) ) &
1980	)**2 + &
1981	( 0.25_wp * ( v(k,j,i) + &
1982	v(k,j+1,i) + &
1983	v(k+1,j,i) + &
1984	v(k+1,j+1,i) ) &
1985	)**2 + &
1986	w(k,j,i)**2 &
1987	) * &
1988	w(k,j,i)
1989	!
1990	!-- Calculate preliminary new velocity, based on pre_tend
1991	pre_w = w(k,j,i) + dt_3d * pre_tend
1992	!
1993	!-- Compare sign of old velocity and new preliminary velocity,
1994	!-- and in case the signs are different, limit the tendency
1995	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
1996	pre_tend = - w(k,j,i) * ddt_3d
1997	ELSE
1998	pre_tend = pre_tend
1999	ENDIF
2000	!
2001	!-- Calculate final tendency
2002	tend(k,j,i) = tend(k,j,i) + pre_tend
2003	ENDDO
2004
2005	!
2006	!-- potential temperature
2007	CASE ( 4 )
2008	!
2009	!-- Determine topography-top index on scalar grid
2010	k_wall = get_topography_top_index_ji( j, i, 's' )
2011
2012	IF ( humidity ) THEN
2013	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
2014	kk = k - k_wall !- lad arrays are defined flat
2015	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i) - &
2016	pc_latent_rate(kk,j,i)
2017	ENDDO
2018	ELSE
2019	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
2020	kk = k - k_wall !- lad arrays are defined flat
2021	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i)
2022	ENDDO
2023	ENDIF
2024
2025	!
2026	!-- humidity
2027	CASE ( 5 )
2028	!
2029	!-- Determine topography-top index on scalar grid
2030	k_wall = get_topography_top_index_ji( j, i, 's' )
2031
2032	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
2033	kk = k - k_wall !- lad arrays are defined flat
2034	IF ( .NOT. plant_canopy_transpiration ) THEN
2035	! pc_transpiration_rate is calculated in radiation model
2036	! in case of plant_canopy_transpiration = .T.
2037	! to include also the dependecy to the radiation
2038	! in the plant canopy box
2039	pc_transpiration_rate(kk,j,i) = - lsec &
2040	* lad_s(kk,j,i) * &
2041	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2042	u(k,j,i+1) ) &
2043	)**2 + &
2044	( 0.5_wp * ( v(k,j,i) + &
2045	v(k,j+1,i) ) &
2046	)**2 + &
2047	( 0.5_wp * ( w(k-1,j,i) + &
2048	w(k,j,i) ) &
2049	)**2 &
2050	) * &
2051	( q(k,j,i) - lsc )
2052	ENDIF
2053
2054	tend(k,j,i) = tend(k,j,i) + pc_transpiration_rate(kk,j,i)
2055
2056	ENDDO
2057
2058	!
2059	!-- sgs-tke
2060	CASE ( 6 )
2061	!
2062	!-- Determine topography-top index on scalar grid
2063	k_wall = get_topography_top_index_ji( j, i, 's' )
2064
2065	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
2066
2067	kk = k - k_wall
2068	tend(k,j,i) = tend(k,j,i) - &
2069	2.0_wp * cdc * &
2070	lad_s(kk,j,i) * &
2071	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2072	u(k,j,i+1) ) &
2073	)**2 + &
2074	( 0.5_wp * ( v(k,j,i) + &
2075	v(k,j+1,i) ) &
2076	)**2 + &
2077	( 0.5_wp * ( w(k,j,i) + &
2078	w(k+1,j,i) ) &
2079	)**2 &
2080	) * &
2081	e(k,j,i)
2082	ENDDO
2083
2084	!
2085	!-- scalar concentration
2086	CASE ( 7 )
2087	!
2088	!-- Determine topography-top index on scalar grid
2089	k_wall = get_topography_top_index_ji( j, i, 's' )
2090
2091	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
2092
2093	kk = k - k_wall
2094	tend(k,j,i) = tend(k,j,i) - &
2095	lsec * &
2096	lad_s(kk,j,i) * &
2097	SQRT( ( 0.5_wp * ( u(k,j,i) + &
2098	u(k,j,i+1) ) &
2099	)**2 + &
2100	( 0.5_wp * ( v(k,j,i) + &
2101	v(k,j+1,i) ) &
2102	)**2 + &
2103	( 0.5_wp * ( w(k-1,j,i) + &
2104	w(k,j,i) ) &
2105	)**2 &
2106	) * &
2107	( s(k,j,i) - lsc )
2108	ENDDO
2109
2110	CASE DEFAULT
2111
2112	WRITE( message_string, * ) 'wrong component: ', component
2113	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
2114
2115	END SELECT
2116
2117	END SUBROUTINE pcm_tendency_ij
2118
2119
2120
2121	END MODULE plant_canopy_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |