Home

Context Navigation

source: palm/trunk/SOURCE/plant_canopy_model_mod.f90 @ 2940

Last change on this file since 2940 was 2932, checked in by maronga, 7 years ago
renamed all Fortran NAMELISTS
Property svn:keywords set to `Id`
File size: 73.1 KB

Line
1	!> @file plant_canopy_model_mod.f90
2	!------------------------------------------------------------------------------!
3	! This file is part of the PALM model system.
4	!
5	! PALM is free software: you can redistribute it and/or modify it under the
6	! terms of the GNU General Public License as published by the Free Software
7	! Foundation, either version 3 of the License, or (at your option) any later
8	! version.
9	!
10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
13	!
14	! You should have received a copy of the GNU General Public License along with
15	! PALM. If not, see <http://www.gnu.org/licenses/>.
16	!
17	! Copyright 1997-2018 Leibniz Universitaet Hannover
18	!------------------------------------------------------------------------------!
19	!
20	! Current revisions:
21	! -----------------
22	!
23	!
24	! Former revisions:
25	! -----------------
26	! $Id: plant_canopy_model_mod.f90 2932 2018-03-26 09:39:22Z suehring $
27	! renamed canopy_par to plant_canopy_parameters
28	!
29	! 2920 2018-03-22 11:22:01Z kanani
30	! Move usm_lad_rma and prototype_lad to radiation_model (moh.hefny)
31	!
32	! 2892 2018-03-14 15:06:29Z suehring
33	! Bugfix, read separate ASCII LAD files for parent and child model.
34	!
35	! 2770 2018-01-25 15:10:09Z kanani
36	! Correction of parameter check
37	!
38	! 2768 2018-01-24 15:38:29Z kanani
39	! Added check for output quantity pcm_heatrate, some formatting
40	!
41	! 2766 2018-01-22 17:17:47Z kanani
42	! Increased LEN of canopy mode to 30
43	!
44	! 2746 2018-01-15 12:06:04Z suehring
45	! Move flag plant canopy to modules
46	!
47	! 2718 2018-01-02 08:49:38Z maronga
48	! Corrected "Former revisions" section
49	!
50	! 2701 2017-12-15 15:40:50Z suehring
51	! Changes from last commit documented
52	!
53	! 2698 2017-12-14 18:46:24Z suehring
54	! Bugfix in get_topography_top_index
55	!
56	! 2696 2017-12-14 17:12:51Z kanani
57	! Change in file header (GPL part)
58	! Bugfix for vertical loop index pch_index in case of Netcdf input
59	! Introduce 2D index array incorporate canopy top index
60	! Check if canopy on top of topography do not exceed vertical dimension
61	! Add check for canopy_mode in case of Netcdf input.
62	! Enable _FillValue output for 3d quantities
63	! Bugfix in reading of PIDS leaf area density (MS)
64	!
65	! 2669 2017-12-06 16:03:27Z raasch
66	! coupling_char removed
67	!
68	! 2512 2017-10-04 08:26:59Z raasch
69	! upper bounds of 3d output changed from nx+1,ny+1 to nx,ny
70	! no output of ghost layer data
71	!
72	! 2318 2017-07-20 17:27:44Z suehring
73	! Get topography top index via Function call
74	!
75	! 2317 2017-07-20 17:27:19Z suehring
76	! Changed error messages
77	!
78	! 2233 2017-05-30 18:08:54Z suehring
79	!
80	! 2232 2017-05-30 17:47:52Z suehring
81	! Adjustments to new topography concept
82	!
83	! 2213 2017-04-24 15:10:35Z kanani
84	! Bugfix: exchange of ghost points in array pc_heating_rate needed for output
85	! of pcm_heatrate, onetime ghost point exchange of lad_s after initialization.
86	! Formatting and clean-up of subroutine pcm_read_plant_canopy_3d,
87	! minor re-organization of canopy-heating initialization.
88	!
89	! 2209 2017-04-19 09:34:46Z kanani
90	! Added 3d output of leaf area density (pcm_lad) and canopy
91	! heat rate (pcm_heatrate)
92	!
93	! 2024 2016-10-12 16:42:37Z kanani
94	! Added missing lad_s initialization
95	!
96	! 2011 2016-09-19 17:29:57Z kanani
97	! Renamed canopy_heat_flux to pc_heating_rate, since the original meaning/
98	! calculation of the quantity has changed, related to the urban surface model
99	! and similar future applications.
100	!
101	! 2007 2016-08-24 15:47:17Z kanani
102	! Added SUBROUTINE pcm_read_plant_canopy_3d for reading 3d plant canopy data
103	! from file (new case canopy_mode=read_from_file_3d) in the course of
104	! introduction of urban surface model,
105	! introduced variable ext_coef,
106	! resorted SUBROUTINEs to alphabetical order
107	!
108	! 2000 2016-08-20 18:09:15Z knoop
109	! Forced header and separation lines into 80 columns
110	!
111	! 1960 2016-07-12 16:34:24Z suehring
112	! Separate humidity and passive scalar
113	!
114	! 1953 2016-06-21 09:28:42Z suehring
115	! Bugfix, lad_s and lad must be public
116	!
117	! 1826 2016-04-07 12:01:39Z maronga
118	! Further modularization
119	!
120	! 1721 2015-11-16 12:56:48Z raasch
121	! bugfixes: shf is reduced in areas covered with canopy only,
122	! canopy is set on top of topography
123	!
124	! 1682 2015-10-07 23:56:08Z knoop
125	! Code annotations made doxygen readable
126	!
127	! 1484 2014-10-21 10:53:05Z kanani
128	! Changes due to new module structure of the plant canopy model:
129	! module plant_canopy_model_mod now contains a subroutine for the
130	! initialization of the canopy model (pcm_init),
131	! limitation of the canopy drag (previously accounted for by calculation of
132	! a limiting canopy timestep for the determination of the maximum LES timestep
133	! in subroutine timestep) is now realized by the calculation of pre-tendencies
134	! and preliminary velocities in subroutine pcm_tendency,
135	! some redundant MPI communication removed in subroutine pcm_init
136	! (was previously in init_3d_model),
137	! unnecessary 3d-arrays lad_u, lad_v, lad_w removed - lad information on the
138	! respective grid is now provided only by lad_s (e.g. in the calculation of
139	! the tendency terms or of cum_lai_hf),
140	! drag_coefficient, lai, leaf_surface_concentration,
141	! scalar_exchange_coefficient, sec and sls renamed to canopy_drag_coeff,
142	! cum_lai_hf, leaf_surface_conc, leaf_scalar_exch_coeff, lsec and lsc,
143	! respectively,
144	! unnecessary 3d-arrays cdc, lsc and lsec now defined as single-value constants,
145	! USE-statements and ONLY-lists modified accordingly
146	!
147	! 1340 2014-03-25 19:45:13Z kanani
148	! REAL constants defined as wp-kind
149	!
150	! 1320 2014-03-20 08:40:49Z raasch
151	! ONLY-attribute added to USE-statements,
152	! kind-parameters added to all INTEGER and REAL declaration statements,
153	! kinds are defined in new module kinds,
154	! old module precision_kind is removed,
155	! revision history before 2012 removed,
156	! comment fields (!:) to be used for variable explanations added to
157	! all variable declaration statements
158	!
159	! 1036 2012-10-22 13:43:42Z raasch
160	! code put under GPL (PALM 3.9)
161	!
162	! 138 2007-11-28 10:03:58Z letzel
163	! Initial revision
164	!
165	! Description:
166	! ------------
167	!> 1) Initialization of the canopy model, e.g. construction of leaf area density
168	!> profile (subroutine pcm_init).
169	!> 2) Calculation of sinks and sources of momentum, heat and scalar concentration
170	!> due to canopy elements (subroutine pcm_tendency).
171	!------------------------------------------------------------------------------!
172	MODULE plant_canopy_model_mod
173
174	USE arrays_3d, &
175	ONLY: dzu, dzw, e, q, s, tend, u, v, w, zu, zw
176
177	USE indices, &
178	ONLY: nbgp, nxl, nxlg, nxlu, nxr, nxrg, nyn, nyng, nys, nysg, nysv, &
179	nz, nzb, nzt
180
181	USE kinds
182
183	USE surface_mod, &
184	ONLY: get_topography_top_index_ji
185
186
187	IMPLICIT NONE
188
189
190	CHARACTER (LEN=30) :: canopy_mode = 'block' !< canopy coverage
191
192	INTEGER(iwp) :: pch_index = 0 !< plant canopy height/top index
193	INTEGER(iwp) :: lad_vertical_gradient_level_ind(10) = -9999 !< lad-profile levels (index)
194
195	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: pch_index_ji !< local plant canopy top
196
197	LOGICAL :: calc_beta_lad_profile = .FALSE. !< switch for calc. of lad from beta func.
198
199	REAL(wp) :: alpha_lad = 9999999.9_wp !< coefficient for lad calculation
200	REAL(wp) :: beta_lad = 9999999.9_wp !< coefficient for lad calculation
201	REAL(wp) :: canopy_drag_coeff = 0.0_wp !< canopy drag coefficient (parameter)
202	REAL(wp) :: cdc = 0.0_wp !< canopy drag coeff. (abbreviation used in equations)
203	REAL(wp) :: cthf = 0.0_wp !< canopy top heat flux
204	REAL(wp) :: dt_plant_canopy = 0.0_wp !< timestep account. for canopy drag
205	REAL(wp) :: ext_coef = 0.6_wp !< extinction coefficient
206	REAL(wp) :: lad_surface = 0.0_wp !< lad surface value
207	REAL(wp) :: lai_beta = 0.0_wp !< leaf area index (lai) for lad calc.
208	REAL(wp) :: leaf_scalar_exch_coeff = 0.0_wp !< canopy scalar exchange coeff.
209	REAL(wp) :: leaf_surface_conc = 0.0_wp !< leaf surface concentration
210	REAL(wp) :: lsc = 0.0_wp !< leaf surface concentration
211	REAL(wp) :: lsec = 0.0_wp !< leaf scalar exchange coeff.
212
213	REAL(wp) :: lad_vertical_gradient(10) = 0.0_wp !< lad gradient
214	REAL(wp) :: lad_vertical_gradient_level(10) = -9999999.9_wp !< lad-prof. levels (in m)
215
216	REAL(wp), DIMENSION(:), ALLOCATABLE :: lad !< leaf area density
217	REAL(wp), DIMENSION(:), ALLOCATABLE :: pre_lad !< preliminary lad
218
219	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: cum_lai_hf !< cumulative lai for heatflux calc.
220	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: lad_s !< lad on scalar-grid
221	REAL(wp), DIMENSION(:,:,:), ALLOCATABLE :: pc_heating_rate !< plant canopy heating rate
222
223	SAVE
224
225
226	PRIVATE
227
228	!
229	!-- Public functions
230	PUBLIC pcm_check_data_output, pcm_check_parameters, pcm_data_output_3d, &
231	pcm_define_netcdf_grid, pcm_header, pcm_init, pcm_parin, pcm_tendency
232
233	!
234	!-- Public variables and constants
235	PUBLIC pc_heating_rate, canopy_mode, cthf, dt_plant_canopy, lad, lad_s, &
236	pch_index
237
238
239	INTERFACE pcm_check_data_output
240	MODULE PROCEDURE pcm_check_data_output
241	END INTERFACE pcm_check_data_output
242
243	INTERFACE pcm_check_parameters
244	MODULE PROCEDURE pcm_check_parameters
245	END INTERFACE pcm_check_parameters
246
247	INTERFACE pcm_data_output_3d
248	MODULE PROCEDURE pcm_data_output_3d
249	END INTERFACE pcm_data_output_3d
250
251	INTERFACE pcm_define_netcdf_grid
252	MODULE PROCEDURE pcm_define_netcdf_grid
253	END INTERFACE pcm_define_netcdf_grid
254
255	INTERFACE pcm_header
256	MODULE PROCEDURE pcm_header
257	END INTERFACE pcm_header
258
259	INTERFACE pcm_init
260	MODULE PROCEDURE pcm_init
261	END INTERFACE pcm_init
262
263	INTERFACE pcm_parin
264	MODULE PROCEDURE pcm_parin
265	END INTERFACE pcm_parin
266
267	INTERFACE pcm_read_plant_canopy_3d
268	MODULE PROCEDURE pcm_read_plant_canopy_3d
269	END INTERFACE pcm_read_plant_canopy_3d
270
271	INTERFACE pcm_tendency
272	MODULE PROCEDURE pcm_tendency
273	MODULE PROCEDURE pcm_tendency_ij
274	END INTERFACE pcm_tendency
275
276
277	CONTAINS
278
279
280	!------------------------------------------------------------------------------!
281	! Description:
282	! ------------
283	!> Check data output for plant canopy model
284	!------------------------------------------------------------------------------!
285	SUBROUTINE pcm_check_data_output( var, unit )
286
287
288	USE control_parameters, &
289	ONLY: data_output, message_string, urban_surface
290
291	IMPLICIT NONE
292
293	CHARACTER (LEN=*) :: unit !<
294	CHARACTER (LEN=*) :: var !<
295
296
297	SELECT CASE ( TRIM( var ) )
298
299	CASE ( 'pcm_heatrate' )
300	IF ( cthf == 0.0_wp .AND. .NOT. urban_surface ) THEN
301	message_string = 'output of "' // TRIM( var ) // '" requi' // &
302	'res setting of parameter cthf /= 0.0'
303	CALL message( 'pcm_check_data_output', 'PA1000', 1, 2, 0, 6, 0 )
304	ENDIF
305	unit = 'K s-1'
306
307	CASE ( 'pcm_lad' )
308	unit = 'm2 m-3'
309
310
311	CASE DEFAULT
312	unit = 'illegal'
313
314	END SELECT
315
316
317	END SUBROUTINE pcm_check_data_output
318
319
320	!------------------------------------------------------------------------------!
321	! Description:
322	! ------------
323	!> Check parameters routine for plant canopy model
324	!------------------------------------------------------------------------------!
325	SUBROUTINE pcm_check_parameters
326
327	USE control_parameters, &
328	ONLY: cloud_physics, coupling_char, message_string, &
329	microphysics_seifert
330
331	USE netcdf_data_input_mod, &
332	ONLY: input_file_static, input_pids_static
333
334
335	IMPLICIT NONE
336
337
338	IF ( canopy_drag_coeff == 0.0_wp ) THEN
339	message_string = 'plant_canopy = .TRUE. requires a non-zero drag '// &
340	'coefficient & given value is canopy_drag_coeff = 0.0'
341	CALL message( 'pcm_check_parameters', 'PA0041', 1, 2, 0, 6, 0 )
342	ENDIF
343
344	IF ( ( alpha_lad /= 9999999.9_wp .AND. beta_lad == 9999999.9_wp ) .OR.&
345	beta_lad /= 9999999.9_wp .AND. alpha_lad == 9999999.9_wp ) THEN
346	message_string = 'using the beta function for the construction ' // &
347	'of the leaf area density profile requires ' // &
348	'both alpha_lad and beta_lad to be /= 9999999.9'
349	CALL message( 'pcm_check_parameters', 'PA0118', 1, 2, 0, 6, 0 )
350	ENDIF
351
352	IF ( calc_beta_lad_profile .AND. lai_beta == 0.0_wp ) THEN
353	message_string = 'using the beta function for the construction ' // &
354	'of the leaf area density profile requires ' // &
355	'a non-zero lai_beta, but given value is ' // &
356	'lai_beta = 0.0'
357	CALL message( 'pcm_check_parameters', 'PA0119', 1, 2, 0, 6, 0 )
358	ENDIF
359
360	IF ( calc_beta_lad_profile .AND. lad_surface /= 0.0_wp ) THEN
361	message_string = 'simultaneous setting of alpha_lad /= 9999999.9 '// &
362	'combined with beta_lad /= 9999999.9 ' // &
363	'and lad_surface /= 0.0 is not possible, ' // &
364	'use either vertical gradients or the beta ' // &
365	'function for the construction of the leaf area '// &
366	'density profile'
367	CALL message( 'pcm_check_parameters', 'PA0120', 1, 2, 0, 6, 0 )
368	ENDIF
369
370	IF ( cloud_physics .AND. microphysics_seifert ) THEN
371	message_string = 'plant_canopy = .TRUE. requires cloud_scheme /=' // &
372	' seifert_beheng'
373	CALL message( 'pcm_check_parameters', 'PA0360', 1, 2, 0, 6, 0 )
374	ENDIF
375	!
376	!-- If dynamic input file is used, canopy need to be read from file
377	IF ( input_pids_static .AND. &
378	TRIM( canopy_mode ) /= 'read_from_file_3d' ) THEN
379	message_string = 'Usage of dynamic input file ' // &
380	TRIM( input_file_static ) // &
381	TRIM( coupling_char ) // ' requires ' // &
382	'canopy_mode = read_from_file_3d'
383	CALL message( 'pcm_check_parameters', 'PA0999', 1, 2, 0, 6, 0 )
384	ENDIF
385
386
387	END SUBROUTINE pcm_check_parameters
388
389
390	!------------------------------------------------------------------------------!
391	!
392	! Description:
393	! ------------
394	!> Subroutine defining 3D output variables
395	!------------------------------------------------------------------------------!
396	SUBROUTINE pcm_data_output_3d( av, variable, found, local_pf, fill_value )
397
398	USE control_parameters, &
399	ONLY : nz_do3d
400
401	USE indices
402
403	USE kinds
404
405
406	IMPLICIT NONE
407
408	CHARACTER (LEN=*) :: variable !<
409
410	INTEGER(iwp) :: av !<
411	INTEGER(iwp) :: i !<
412	INTEGER(iwp) :: j !<
413	INTEGER(iwp) :: k !<
414	INTEGER(iwp) :: k_topo !< topography top index
415
416	LOGICAL :: found !<
417
418	REAL(wp) :: fill_value
419	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb:nz_do3d) :: local_pf !<
420
421
422	found = .TRUE.
423
424	local_pf = REAL( fill_value, KIND = 4 )
425
426	SELECT CASE ( TRIM( variable ) )
427
428	CASE ( 'pcm_heatrate' )
429	IF ( av == 0 ) THEN
430	DO i = nxl, nxr
431	DO j = nys, nyn
432	IF ( pch_index_ji(j,i) /= 0 ) THEN
433	k_topo = get_topography_top_index_ji( j, i, 's' )
434	DO k = k_topo, k_topo + pch_index_ji(j,i)
435	local_pf(i,j,k) = pc_heating_rate(k-k_topo,j,i)
436	ENDDO
437	ENDIF
438	ENDDO
439	ENDDO
440	ENDIF
441
442
443	CASE ( 'pcm_lad' )
444	IF ( av == 0 ) THEN
445	DO i = nxl, nxr
446	DO j = nys, nyn
447	IF ( pch_index_ji(j,i) /= 0 ) THEN
448	k_topo = get_topography_top_index_ji( j, i, 's' )
449	DO k = k_topo, k_topo + pch_index_ji(j,i)
450	local_pf(i,j,k) = lad_s(k-k_topo,j,i)
451	ENDDO
452	ENDIF
453	ENDDO
454	ENDDO
455	ENDIF
456
457
458	CASE DEFAULT
459	found = .FALSE.
460
461	END SELECT
462
463
464	END SUBROUTINE pcm_data_output_3d
465
466	!------------------------------------------------------------------------------!
467	!
468	! Description:
469	! ------------
470	!> Subroutine defining appropriate grid for netcdf variables.
471	!> It is called from subroutine netcdf.
472	!------------------------------------------------------------------------------!
473	SUBROUTINE pcm_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
474
475	IMPLICIT NONE
476
477	CHARACTER (LEN=*), INTENT(IN) :: var !<
478	LOGICAL, INTENT(OUT) :: found !<
479	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !<
480	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !<
481	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !<
482
483	found = .TRUE.
484
485	!
486	!-- Check for the grid
487	SELECT CASE ( TRIM( var ) )
488
489	CASE ( 'pcm_heatrate', 'pcm_lad' )
490	grid_x = 'x'
491	grid_y = 'y'
492	grid_z = 'zu'
493
494	CASE DEFAULT
495	found = .FALSE.
496	grid_x = 'none'
497	grid_y = 'none'
498	grid_z = 'none'
499	END SELECT
500
501	END SUBROUTINE pcm_define_netcdf_grid
502
503
504	!------------------------------------------------------------------------------!
505	! Description:
506	! ------------
507	!> Header output for plant canopy model
508	!------------------------------------------------------------------------------!
509	SUBROUTINE pcm_header ( io )
510
511	USE control_parameters, &
512	ONLY: dz, passive_scalar
513
514
515	IMPLICIT NONE
516
517	CHARACTER (LEN=10) :: coor_chr !<
518
519	CHARACTER (LEN=86) :: coordinates !<
520	CHARACTER (LEN=86) :: gradients !<
521	CHARACTER (LEN=86) :: leaf_area_density !<
522	CHARACTER (LEN=86) :: slices !<
523
524	INTEGER(iwp) :: i !<
525	INTEGER(iwp), INTENT(IN) :: io !< Unit of the output file
526	INTEGER(iwp) :: k !<
527
528	REAL(wp) :: canopy_height !< canopy height (in m)
529
530	canopy_height = pch_index * dz
531
532	WRITE ( io, 1 ) canopy_mode, canopy_height, pch_index, &
533	canopy_drag_coeff
534	IF ( passive_scalar ) THEN
535	WRITE ( io, 2 ) leaf_scalar_exch_coeff, &
536	leaf_surface_conc
537	ENDIF
538
539	!
540	!-- Heat flux at the top of vegetation
541	WRITE ( io, 3 ) cthf
542
543	!
544	!-- Leaf area density profile, calculated either from given vertical
545	!-- gradients or from beta probability density function.
546	IF ( .NOT. calc_beta_lad_profile ) THEN
547
548	!-- Building output strings, starting with surface value
549	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
550	gradients = '------'
551	slices = ' 0'
552	coordinates = ' 0.0'
553	i = 1
554	DO WHILE ( i < 11 .AND. lad_vertical_gradient_level_ind(i) &
555	/= -9999 )
556
557	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
558	leaf_area_density = TRIM( leaf_area_density ) // ' ' // &
559	TRIM( coor_chr )
560
561	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
562	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
563
564	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
565	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
566
567	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
568	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
569
570	i = i + 1
571	ENDDO
572
573	WRITE ( io, 4 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
574	TRIM( gradients ), TRIM( slices )
575
576	ELSE
577
578	WRITE ( leaf_area_density, '(F7.4)' ) lad_surface
579	coordinates = ' 0.0'
580
581	DO k = 1, pch_index
582
583	WRITE (coor_chr,'(F7.2)') lad(k)
584	leaf_area_density = TRIM( leaf_area_density ) // ' ' // &
585	TRIM( coor_chr )
586
587	WRITE (coor_chr,'(F7.1)') zu(k)
588	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
589
590	ENDDO
591
592	WRITE ( io, 5 ) TRIM( coordinates ), TRIM( leaf_area_density ), &
593	alpha_lad, beta_lad, lai_beta
594
595	ENDIF
596
597	1 FORMAT (//' Vegetation canopy (drag) model:'/ &
598	' ------------------------------'// &
599	' Canopy mode: ', A / &
600	' Canopy height: ',F6.2,'m (',I4,' grid points)' / &
601	' Leaf drag coefficient: ',F6.2 /)
602	2 FORMAT (/ ' Scalar exchange coefficient: ',F6.2 / &
603	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
604	3 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2, &
605	' K m/s')
606	4 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
607	' Height: ',A,' m'/ &
608	' Leaf area density: ',A,' m2/m3'/ &
609	' Gradient: ',A,' m2/m4'/ &
610	' Gridpoint: ',A)
611	5 FORMAT (//' Characteristic levels of the leaf area density and coefficients:'&
612	// ' Height: ',A,' m'/ &
613	' Leaf area density: ',A,' m2/m3'/ &
614	' Coefficient alpha: ',F6.2 / &
615	' Coefficient beta: ',F6.2 / &
616	' Leaf area index: ',F6.2,' m2/m2' /)
617
618	END SUBROUTINE pcm_header
619
620
621	!------------------------------------------------------------------------------!
622	! Description:
623	! ------------
624	!> Initialization of the plant canopy model
625	!------------------------------------------------------------------------------!
626	SUBROUTINE pcm_init
627
628
629	USE control_parameters, &
630	ONLY: dz, humidity, io_blocks, io_group, message_string, ocean, &
631	passive_scalar, urban_surface
632
633	USE netcdf_data_input_mod, &
634	ONLY: leaf_area_density_f
635
636	USE surface_mod, &
637	ONLY: surf_def_h, surf_lsm_h, surf_usm_h
638
639	IMPLICIT NONE
640
641	CHARACTER(10) :: pct
642
643	INTEGER(iwp) :: i !< running index
644	INTEGER(iwp) :: ii !< index
645	INTEGER(iwp) :: j !< running index
646	INTEGER(iwp) :: k !< running index
647	INTEGER(iwp) :: m !< running index
648
649	REAL(wp) :: int_bpdf !< vertical integral for lad-profile construction
650	REAL(wp) :: dzh !< vertical grid spacing in units of canopy height
651	REAL(wp) :: gradient !< gradient for lad-profile construction
652	REAL(wp) :: canopy_height !< canopy height for lad-profile construction
653	REAL(wp) :: pcv(nzb:nzt+1) !<
654
655	!
656	!-- Allocate one-dimensional arrays for the computation of the
657	!-- leaf area density (lad) profile
658	ALLOCATE( lad(0:nz+1), pre_lad(0:nz+1) )
659	lad = 0.0_wp
660	pre_lad = 0.0_wp
661
662	!
663	!-- Set flag that indicates that the lad-profile shall be calculated by using
664	!-- a beta probability density function
665	IF ( alpha_lad /= 9999999.9_wp .AND. beta_lad /= 9999999.9_wp ) THEN
666	calc_beta_lad_profile = .TRUE.
667	ENDIF
668
669
670	!
671	!-- Compute the profile of leaf area density used in the plant
672	!-- canopy model. The profile can either be constructed from
673	!-- prescribed vertical gradients of the leaf area density or by
674	!-- using a beta probability density function (see e.g. Markkanen et al.,
675	!-- 2003: Boundary-Layer Meteorology, 106, 437-459)
676	IF ( .NOT. calc_beta_lad_profile ) THEN
677
678	!
679	!-- Use vertical gradients for lad-profile construction
680	i = 1
681	gradient = 0.0_wp
682
683	IF ( .NOT. ocean ) THEN
684
685	lad(0) = lad_surface
686	lad_vertical_gradient_level_ind(1) = 0
687
688	DO k = 1, pch_index
689	IF ( i < 11 ) THEN
690	IF ( lad_vertical_gradient_level(i) < zu(k) .AND. &
691	lad_vertical_gradient_level(i) >= 0.0_wp ) THEN
692	gradient = lad_vertical_gradient(i)
693	lad_vertical_gradient_level_ind(i) = k - 1
694	i = i + 1
695	ENDIF
696	ENDIF
697	IF ( gradient /= 0.0_wp ) THEN
698	IF ( k /= 1 ) THEN
699	lad(k) = lad(k-1) + dzu(k) * gradient
700	ELSE
701	lad(k) = lad_surface + dzu(k) * gradient
702	ENDIF
703	ELSE
704	lad(k) = lad(k-1)
705	ENDIF
706	ENDDO
707
708	ENDIF
709
710	!
711	!-- In case of no given leaf area density gradients, choose a vanishing
712	!-- gradient. This information is used for the HEADER and the RUN_CONTROL
713	!-- file.
714	IF ( lad_vertical_gradient_level(1) == -9999999.9_wp ) THEN
715	lad_vertical_gradient_level(1) = 0.0_wp
716	ENDIF
717
718	ELSE
719
720	!
721	!-- Use beta function for lad-profile construction
722	int_bpdf = 0.0_wp
723	canopy_height = pch_index * dz
724
725	DO k = 0, pch_index
726	int_bpdf = int_bpdf + &
727	( ( ( zw(k) / canopy_height )*( alpha_lad-1.0_wp ) ) &
728	( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
729	beta_lad-1.0_wp ) ) &
730	* ( ( zw(k+1)-zw(k) ) / canopy_height ) )
731	ENDDO
732
733	!
734	!-- Preliminary lad profile (defined on w-grid)
735	DO k = 0, pch_index
736	pre_lad(k) = lai_beta * &
737	( ( ( zw(k) / canopy_height )**( alpha_lad-1.0_wp ) ) &
738	* ( ( 1.0_wp - ( zw(k) / canopy_height ) )**( &
739	beta_lad-1.0_wp ) ) / int_bpdf &
740	) / canopy_height
741	ENDDO
742
743	!
744	!-- Final lad profile (defined on scalar-grid level, since most prognostic
745	!-- quantities are defined there, hence, less interpolation is required
746	!-- when calculating the canopy tendencies)
747	lad(0) = pre_lad(0)
748	DO k = 1, pch_index
749	lad(k) = 0.5 * ( pre_lad(k-1) + pre_lad(k) )
750	ENDDO
751
752	ENDIF
753
754	!
755	!-- Allocate 3D-array for the leaf area density (lad_s).
756	ALLOCATE( lad_s(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
757
758	!
759	!-- Initialize canopy parameters cdc (canopy drag coefficient),
760	!-- lsec (leaf scalar exchange coefficient), lsc (leaf surface concentration)
761	!-- with the prescribed values
762	cdc = canopy_drag_coeff
763	lsec = leaf_scalar_exch_coeff
764	lsc = leaf_surface_conc
765
766	!
767	!-- Initialization of the canopy coverage in the model domain:
768	!-- Setting the parameter canopy_mode = 'block' initializes a canopy, which
769	!-- fully covers the domain surface
770	SELECT CASE ( TRIM( canopy_mode ) )
771
772	CASE( 'block' )
773
774	DO i = nxlg, nxrg
775	DO j = nysg, nyng
776	lad_s(:,j,i) = lad(:)
777	ENDDO
778	ENDDO
779
780	CASE ( 'read_from_file_3d' )
781	!
782	!-- Initialize LAD with data from file. If LAD is given in NetCDF file,
783	!-- use these values, else take LAD profiles from ASCII file.
784	!-- Please note, in NetCDF file LAD is only given up to the maximum
785	!-- canopy top, indicated by leaf_area_density_f%nz.
786	lad_s = 0.0_wp
787	IF ( leaf_area_density_f%from_file ) THEN
788	!
789	!-- Set also pch_index, used to be the upper bound of the vertical
790	!-- loops. Therefore, use the global top of the canopy layer.
791	pch_index = leaf_area_density_f%nz - 1
792
793	DO i = nxl, nxr
794	DO j = nys, nyn
795	DO k = 0, leaf_area_density_f%nz - 1
796	IF ( leaf_area_density_f%var(k,j,i) /= &
797	leaf_area_density_f%fill ) &
798	lad_s(k,j,i) = leaf_area_density_f%var(k,j,i)
799	ENDDO
800	ENDDO
801	ENDDO
802	CALL exchange_horiz( lad_s, nbgp )
803	!
804	! ASCII file
805	!-- Initialize canopy parameters cdc (canopy drag coefficient),
806	!-- lsec (leaf scalar exchange coefficient), lsc (leaf surface concentration)
807	!-- from file which contains complete 3D data (separate vertical profiles for
808	!-- each location).
809	ELSE
810	CALL pcm_read_plant_canopy_3d
811	ENDIF
812
813	CASE DEFAULT
814	!
815	!-- The DEFAULT case is reached either if the parameter
816	!-- canopy mode contains a wrong character string or if the
817	!-- user has coded a special case in the user interface.
818	!-- There, the subroutine user_init_plant_canopy checks
819	!-- which of these two conditions applies.
820	CALL user_init_plant_canopy
821
822	END SELECT
823	!
824	!-- Initialize 2D index array indicating canopy top index.
825	ALLOCATE( pch_index_ji(nysg:nyng,nxlg:nxrg) )
826	pch_index_ji = 0
827
828	DO i = nxl, nxr
829	DO j = nys, nyn
830	DO k = 0, pch_index
831	IF ( lad_s(k,j,i) /= 0 ) pch_index_ji(j,i) = k
832	ENDDO
833	!
834	!-- Check whether topography and local vegetation on top exceed
835	!-- height of the model domain.
836	k = get_topography_top_index_ji( j, i, 's' )
837	IF ( k + pch_index_ji(j,i) >= nzt + 1 ) THEN
838	message_string = 'Local vegetation height on top of ' // &
839	'topography exceeds height of model domain.'
840	CALL message( 'pcm_init', 'PA0999', 2, 2, 0, 6, 0 )
841	ENDIF
842
843	ENDDO
844	ENDDO
845
846	CALL exchange_horiz_2d_int( pch_index_ji, nys, nyn, nxl, nxr, nbgp )
847
848	!
849	!-- Initialization of the canopy heat source distribution due to heating
850	!-- of the canopy layers by incoming solar radiation, in case that a non-zero
851	!-- value is set for the canopy top heat flux (cthf), which equals the
852	!-- available net radiation at canopy top.
853	!-- The heat source distribution is calculated by a decaying exponential
854	!-- function of the downward cumulative leaf area index (cum_lai_hf),
855	!-- assuming that the foliage inside the plant canopy is heated by solar
856	!-- radiation penetrating the canopy layers according to the distribution
857	!-- of net radiation as suggested by Brown & Covey (1966; Agric. Meteorol. 3,
858	!-- 73â96). This approach has been applied e.g. by Shaw & Schumann (1992;
859	!-- Bound.-Layer Meteorol. 61, 47â64).
860	!-- When using the urban surface model (USM), canopy heating (pc_heating_rate)
861	!-- by radiation is calculated in the USM.
862	IF ( cthf /= 0.0_wp .AND. .NOT. urban_surface ) THEN
863
864	ALLOCATE( cum_lai_hf(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
865	pc_heating_rate(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
866	!
867	!-- Piecewise calculation of the cumulative leaf area index by vertical
868	!-- integration of the leaf area density
869	cum_lai_hf(:,:,:) = 0.0_wp
870	DO i = nxlg, nxrg
871	DO j = nysg, nyng
872	DO k = pch_index_ji(j,i)-1, 0, -1
873	IF ( k == pch_index_ji(j,i)-1 ) THEN
874	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
875	( 0.5_wp * lad_s(k+1,j,i) * &
876	( zw(k+1) - zu(k+1) ) ) + &
877	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
878	lad_s(k,j,i) ) + &
879	lad_s(k+1,j,i) ) * &
880	( zu(k+1) - zw(k) ) )
881	ELSE
882	cum_lai_hf(k,j,i) = cum_lai_hf(k+1,j,i) + &
883	( 0.5_wp * ( 0.5_wp * ( lad_s(k+2,j,i) + &
884	lad_s(k+1,j,i) ) + &
885	lad_s(k+1,j,i) ) * &
886	( zw(k+1) - zu(k+1) ) ) + &
887	( 0.5_wp * ( 0.5_wp * ( lad_s(k+1,j,i) + &
888	lad_s(k,j,i) ) + &
889	lad_s(k+1,j,i) ) * &
890	( zu(k+1) - zw(k) ) )
891	ENDIF
892	ENDDO
893	ENDDO
894	ENDDO
895
896	!
897	!-- In areas with canopy the surface value of the canopy heat
898	!-- flux distribution overrides the surface heat flux (shf)
899	!-- Start with default surface type
900	DO m = 1, surf_def_h(0)%ns
901	k = surf_def_h(0)%k(m)
902	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
903	surf_def_h(0)%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
904	ENDDO
905	!
906	!-- Natural surfaces
907	DO m = 1, surf_lsm_h%ns
908	k = surf_lsm_h%k(m)
909	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
910	surf_lsm_h%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
911	ENDDO
912	!
913	!-- Urban surfaces
914	DO m = 1, surf_usm_h%ns
915	k = surf_usm_h%k(m)
916	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) &
917	surf_usm_h%shf(m) = cthf * exp( -ext_coef * cum_lai_hf(0,j,i) )
918	ENDDO
919	!
920	!
921	!-- Calculation of the heating rate (K/s) within the different layers of
922	!-- the plant canopy. Calculation is only necessary in areas covered with
923	!-- canopy.
924	!-- Within the different canopy layers the plant-canopy heating
925	!-- rate (pc_heating_rate) is calculated as the vertical
926	!-- divergence of the canopy heat fluxes at the top and bottom
927	!-- of the respective layer
928	DO i = nxlg, nxrg
929	DO j = nysg, nyng
930	DO k = 1, pch_index_ji(j,i)
931	IF ( cum_lai_hf(0,j,i) /= 0.0_wp ) THEN
932	pc_heating_rate(k,j,i) = cthf * &
933	( exp(-ext_coef*cum_lai_hf(k,j,i)) - &
934	exp(-ext_coef*cum_lai_hf(k-1,j,i) ) ) / dzw(k)
935	ENDIF
936	ENDDO
937	ENDDO
938	ENDDO
939
940	ENDIF
941
942
943
944	END SUBROUTINE pcm_init
945
946
947	!------------------------------------------------------------------------------!
948	! Description:
949	! ------------
950	!> Parin for &plant_canopy_parameters for plant canopy model
951	!------------------------------------------------------------------------------!
952	SUBROUTINE pcm_parin
953
954	USE control_parameters, &
955	ONLY: message_string, plant_canopy
956
957	IMPLICIT NONE
958
959	CHARACTER (LEN=80) :: line !< dummy string that contains the current line of the parameter file
960
961	NAMELIST /plant_canopy_parameters/ &
962	alpha_lad, beta_lad, canopy_drag_coeff, &
963	canopy_mode, cthf, &
964	lad_surface, &
965	lad_vertical_gradient, &
966	lad_vertical_gradient_level, &
967	lai_beta, &
968	leaf_scalar_exch_coeff, &
969	leaf_surface_conc, pch_index
970
971	NAMELIST /canopy_par/ alpha_lad, beta_lad, canopy_drag_coeff, &
972	canopy_mode, cthf, &
973	lad_surface, &
974	lad_vertical_gradient, &
975	lad_vertical_gradient_level, &
976	lai_beta, &
977	leaf_scalar_exch_coeff, &
978	leaf_surface_conc, pch_index
979
980	line = ' '
981
982	!
983	!-- Try to find radiation model package
984	REWIND ( 11 )
985	line = ' '
986	DO WHILE ( INDEX( line, '&plant_canopy_parameters' ) == 0 )
987	READ ( 11, '(A)', END=10 ) line
988	ENDDO
989	BACKSPACE ( 11 )
990
991	!
992	!-- Read user-defined namelist
993	READ ( 11, plant_canopy_parameters )
994
995	!
996	!-- Set flag that indicates that the radiation model is switched on
997	plant_canopy = .TRUE.
998
999	GOTO 12
1000	!
1001	!-- Try to find old namelist
1002	10 REWIND ( 11 )
1003	line = ' '
1004	DO WHILE ( INDEX( line, '&canopy_par' ) == 0 )
1005	READ ( 11, '(A)', END=12 ) line
1006	ENDDO
1007	BACKSPACE ( 11 )
1008
1009	!
1010	!-- Read user-defined namelist
1011	READ ( 11, canopy_par )
1012
1013	message_string = 'namelist canopy_par is deprecated and will be ' // &
1014	'removed in near future. Please &use namelist ' // &
1015	'plant_canopy_parameters instead'
1016	CALL message( 'pcm_parin', 'PA0487', 0, 1, 0, 6, 0 )
1017
1018	!
1019	!-- Set flag that indicates that the radiation model is switched on
1020	plant_canopy = .TRUE.
1021
1022	12 CONTINUE
1023
1024
1025	END SUBROUTINE pcm_parin
1026
1027
1028
1029	!------------------------------------------------------------------------------!
1030	! Description:
1031	! ------------
1032	!
1033	!> Loads 3D plant canopy data from file. File format is as follows:
1034	!>
1035	!> num_levels
1036	!> dtype,x,y,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1037	!> dtype,x,y,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1038	!> dtype,x,y,value(nzb),value(nzb+1), ... ,value(nzb+num_levels-1)
1039	!> ...
1040	!>
1041	!> i.e. first line determines number of levels and further lines represent plant
1042	!> canopy data, one line per column and variable. In each data line,
1043	!> dtype represents variable to be set:
1044	!>
1045	!> dtype=1: leaf area density (lad_s)
1046	!> dtype=2....n: some additional plant canopy input data quantity
1047	!>
1048	!> Zeros are added automatically above num_levels until top of domain. Any
1049	!> non-specified (x,y) columns have zero values as default.
1050	!------------------------------------------------------------------------------!
1051	SUBROUTINE pcm_read_plant_canopy_3d
1052
1053	USE control_parameters, &
1054	ONLY: coupling_char, message_string, passive_scalar
1055
1056	USE indices, &
1057	ONLY: nbgp
1058
1059	IMPLICIT NONE
1060
1061	INTEGER(iwp) :: dtype !< type of input data (1=lad)
1062	INTEGER(iwp) :: i, j !< running index
1063	INTEGER(iwp) :: nzp !< number of vertical layers of plant canopy
1064	INTEGER(iwp) :: nzpltop !<
1065	INTEGER(iwp) :: nzpl !<
1066
1067	REAL(wp), DIMENSION(:), ALLOCATABLE :: col !< vertical column of input data
1068
1069	!
1070	!-- Initialize lad_s array
1071	lad_s = 0.0_wp
1072
1073	!
1074	!-- Open and read plant canopy input data
1075	OPEN(152, file='PLANT_CANOPY_DATA_3D' // TRIM( coupling_char ), &
1076	access='SEQUENTIAL', action='READ', status='OLD', &
1077	form='FORMATTED', err=515)
1078	READ(152, *, err=516, end=517) nzp !< read first line = number of vertical layers
1079
1080	ALLOCATE(col(0:nzp-1))
1081
1082	DO
1083	READ(152, *, err=516, end=517) dtype, i, j, col(:)
1084	IF ( i < nxlg .or. i > nxrg .or. j < nysg .or. j > nyng ) CYCLE
1085
1086	SELECT CASE (dtype)
1087	CASE( 1 ) !< leaf area density
1088	!
1089	!-- This is just the pure canopy layer assumed to be grounded to
1090	!-- a flat domain surface. At locations where plant canopy sits
1091	!-- on top of any kind of topography, the vertical plant column
1092	!-- must be "lifted", which is done in SUBROUTINE pcm_tendency.
1093	lad_s(0:nzp-1, j, i) = col(0:nzp-1)
1094
1095	CASE DEFAULT
1096	WRITE(message_string, '(a,i2,a)') &
1097	'Unknown record type in file PLANT_CANOPY_DATA_3D: "', dtype, '"'
1098	CALL message( 'pcm_read_plant_canopy_3d', 'PA0530', 1, 2, 0, 6, 0 )
1099	END SELECT
1100	ENDDO
1101
1102	515 message_string = 'error opening file PLANT_CANOPY_DATA_3D'
1103	CALL message( 'pcm_read_plant_canopy_3d', 'PA0531', 1, 2, 0, 6, 0 )
1104
1105	516 message_string = 'error reading file PLANT_CANOPY_DATA_3D'
1106	CALL message( 'pcm_read_plant_canopy_3d', 'PA0532', 1, 2, 0, 6, 0 )
1107
1108	517 CLOSE(152)
1109	DEALLOCATE(col)
1110
1111	CALL exchange_horiz( lad_s, nbgp )
1112
1113	END SUBROUTINE pcm_read_plant_canopy_3d
1114
1115
1116
1117	!------------------------------------------------------------------------------!
1118	! Description:
1119	! ------------
1120	!> Calculation of the tendency terms, accounting for the effect of the plant
1121	!> canopy on momentum and scalar quantities.
1122	!>
1123	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
1124	!> (defined on scalar grid), as initialized in subroutine pcm_init.
1125	!> The lad on the w-grid is vertically interpolated from the surrounding
1126	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
1127	!> k = pch_index. Here, the lad is zero.
1128	!>
1129	!> The canopy drag must be limited (previously accounted for by calculation of
1130	!> a limiting canopy timestep for the determination of the maximum LES timestep
1131	!> in subroutine timestep), since it is physically impossible that the canopy
1132	!> drag alone can locally change the sign of a velocity component. This
1133	!> limitation is realized by calculating preliminary tendencies and velocities.
1134	!> It is subsequently checked if the preliminary new velocity has a different
1135	!> sign than the current velocity. If so, the tendency is limited in a way that
1136	!> the velocity can at maximum be reduced to zero by the canopy drag.
1137	!>
1138	!>
1139	!> Call for all grid points
1140	!------------------------------------------------------------------------------!
1141	SUBROUTINE pcm_tendency( component )
1142
1143
1144	USE control_parameters, &
1145	ONLY: dt_3d, message_string
1146
1147	USE kinds
1148
1149	IMPLICIT NONE
1150
1151	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
1152	INTEGER(iwp) :: i !< running index
1153	INTEGER(iwp) :: j !< running index
1154	INTEGER(iwp) :: k !< running index
1155	INTEGER(iwp) :: k_wall !< vertical index of topography top
1156	INTEGER(iwp) :: kk !< running index for flat lad arrays
1157
1158	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
1159	REAL(wp) :: lad_local !< local lad value
1160	REAL(wp) :: pre_tend !< preliminary tendency
1161	REAL(wp) :: pre_u !< preliminary u-value
1162	REAL(wp) :: pre_v !< preliminary v-value
1163	REAL(wp) :: pre_w !< preliminary w-value
1164
1165
1166	ddt_3d = 1.0_wp / dt_3d
1167
1168	!
1169	!-- Compute drag for the three velocity components and the SGS-TKE:
1170	SELECT CASE ( component )
1171
1172	!
1173	!-- u-component
1174	CASE ( 1 )
1175	DO i = nxlu, nxr
1176	DO j = nys, nyn
1177	!
1178	!-- Determine topography-top index on u-grid
1179	k_wall = get_topography_top_index_ji( j, i, 'u' )
1180	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1181
1182	kk = k - k_wall !- lad arrays are defined flat
1183	!
1184	!-- In order to create sharp boundaries of the plant canopy,
1185	!-- the lad on the u-grid at index (k,j,i) is equal to
1186	!-- lad_s(k,j,i), rather than being interpolated from the
1187	!-- surrounding lad_s, because this would yield smaller lad
1188	!-- at the canopy boundaries than inside of the canopy.
1189	!-- For the same reason, the lad at the rightmost(i+1)canopy
1190	!-- boundary on the u-grid equals lad_s(k,j,i).
1191	lad_local = lad_s(kk,j,i)
1192	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp )&
1193	THEN
1194	lad_local = lad_s(kk,j,i-1)
1195	ENDIF
1196
1197	pre_tend = 0.0_wp
1198	pre_u = 0.0_wp
1199	!
1200	!-- Calculate preliminary value (pre_tend) of the tendency
1201	pre_tend = - cdc * &
1202	lad_local * &
1203	SQRT( u(k,j,i)**2 + &
1204	( 0.25_wp * ( v(k,j,i-1) + &
1205	v(k,j,i) + &
1206	v(k,j+1,i) + &
1207	v(k,j+1,i-1) ) &
1208	)**2 + &
1209	( 0.25_wp * ( w(k-1,j,i-1) + &
1210	w(k-1,j,i) + &
1211	w(k,j,i-1) + &
1212	w(k,j,i) ) &
1213	)**2 &
1214	) * &
1215	u(k,j,i)
1216
1217	!
1218	!-- Calculate preliminary new velocity, based on pre_tend
1219	pre_u = u(k,j,i) + dt_3d * pre_tend
1220	!
1221	!-- Compare sign of old velocity and new preliminary velocity,
1222	!-- and in case the signs are different, limit the tendency
1223	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
1224	pre_tend = - u(k,j,i) * ddt_3d
1225	ELSE
1226	pre_tend = pre_tend
1227	ENDIF
1228	!
1229	!-- Calculate final tendency
1230	tend(k,j,i) = tend(k,j,i) + pre_tend
1231
1232	ENDDO
1233	ENDDO
1234	ENDDO
1235
1236	!
1237	!-- v-component
1238	CASE ( 2 )
1239	DO i = nxl, nxr
1240	DO j = nysv, nyn
1241	!
1242	!-- Determine topography-top index on v-grid
1243	k_wall = get_topography_top_index_ji( j, i, 'v' )
1244
1245	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1246
1247	kk = k - k_wall !- lad arrays are defined flat
1248	!
1249	!-- In order to create sharp boundaries of the plant canopy,
1250	!-- the lad on the v-grid at index (k,j,i) is equal to
1251	!-- lad_s(k,j,i), rather than being interpolated from the
1252	!-- surrounding lad_s, because this would yield smaller lad
1253	!-- at the canopy boundaries than inside of the canopy.
1254	!-- For the same reason, the lad at the northmost(j+1) canopy
1255	!-- boundary on the v-grid equals lad_s(k,j,i).
1256	lad_local = lad_s(kk,j,i)
1257	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp )&
1258	THEN
1259	lad_local = lad_s(kk,j-1,i)
1260	ENDIF
1261
1262	pre_tend = 0.0_wp
1263	pre_v = 0.0_wp
1264	!
1265	!-- Calculate preliminary value (pre_tend) of the tendency
1266	pre_tend = - cdc * &
1267	lad_local * &
1268	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
1269	u(k,j-1,i+1) + &
1270	u(k,j,i) + &
1271	u(k,j,i+1) ) &
1272	)**2 + &
1273	v(k,j,i)**2 + &
1274	( 0.25_wp * ( w(k-1,j-1,i) + &
1275	w(k-1,j,i) + &
1276	w(k,j-1,i) + &
1277	w(k,j,i) ) &
1278	)**2 &
1279	) * &
1280	v(k,j,i)
1281
1282	!
1283	!-- Calculate preliminary new velocity, based on pre_tend
1284	pre_v = v(k,j,i) + dt_3d * pre_tend
1285	!
1286	!-- Compare sign of old velocity and new preliminary velocity,
1287	!-- and in case the signs are different, limit the tendency
1288	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
1289	pre_tend = - v(k,j,i) * ddt_3d
1290	ELSE
1291	pre_tend = pre_tend
1292	ENDIF
1293	!
1294	!-- Calculate final tendency
1295	tend(k,j,i) = tend(k,j,i) + pre_tend
1296
1297	ENDDO
1298	ENDDO
1299	ENDDO
1300
1301	!
1302	!-- w-component
1303	CASE ( 3 )
1304	DO i = nxl, nxr
1305	DO j = nys, nyn
1306	!
1307	!-- Determine topography-top index on w-grid
1308	k_wall = get_topography_top_index_ji( j, i, 'w' )
1309
1310	DO k = k_wall+1, k_wall + pch_index_ji(j,i) - 1
1311
1312	kk = k - k_wall !- lad arrays are defined flat
1313
1314	pre_tend = 0.0_wp
1315	pre_w = 0.0_wp
1316	!
1317	!-- Calculate preliminary value (pre_tend) of the tendency
1318	pre_tend = - cdc * &
1319	(0.5_wp * &
1320	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
1321	SQRT( ( 0.25_wp * ( u(k,j,i) + &
1322	u(k,j,i+1) + &
1323	u(k+1,j,i) + &
1324	u(k+1,j,i+1) ) &
1325	)**2 + &
1326	( 0.25_wp * ( v(k,j,i) + &
1327	v(k,j+1,i) + &
1328	v(k+1,j,i) + &
1329	v(k+1,j+1,i) ) &
1330	)**2 + &
1331	w(k,j,i)**2 &
1332	) * &
1333	w(k,j,i)
1334	!
1335	!-- Calculate preliminary new velocity, based on pre_tend
1336	pre_w = w(k,j,i) + dt_3d * pre_tend
1337	!
1338	!-- Compare sign of old velocity and new preliminary velocity,
1339	!-- and in case the signs are different, limit the tendency
1340	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
1341	pre_tend = - w(k,j,i) * ddt_3d
1342	ELSE
1343	pre_tend = pre_tend
1344	ENDIF
1345	!
1346	!-- Calculate final tendency
1347	tend(k,j,i) = tend(k,j,i) + pre_tend
1348
1349	ENDDO
1350	ENDDO
1351	ENDDO
1352
1353	!
1354	!-- potential temperature
1355	CASE ( 4 )
1356	DO i = nxl, nxr
1357	DO j = nys, nyn
1358	!
1359	!-- Determine topography-top index on scalar-grid
1360	k_wall = get_topography_top_index_ji( j, i, 's' )
1361
1362	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1363
1364	kk = k - k_wall !- lad arrays are defined flat
1365	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i)
1366	ENDDO
1367	ENDDO
1368	ENDDO
1369
1370	!
1371	!-- humidity
1372	CASE ( 5 )
1373	DO i = nxl, nxr
1374	DO j = nys, nyn
1375	!
1376	!-- Determine topography-top index on scalar-grid
1377	k_wall = get_topography_top_index_ji( j, i, 's' )
1378
1379	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1380
1381	kk = k - k_wall !- lad arrays are defined flat
1382	tend(k,j,i) = tend(k,j,i) - &
1383	lsec * &
1384	lad_s(kk,j,i) * &
1385	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1386	u(k,j,i+1) ) &
1387	)**2 + &
1388	( 0.5_wp * ( v(k,j,i) + &
1389	v(k,j+1,i) ) &
1390	)**2 + &
1391	( 0.5_wp * ( w(k-1,j,i) + &
1392	w(k,j,i) ) &
1393	)**2 &
1394	) * &
1395	( q(k,j,i) - lsc )
1396	ENDDO
1397	ENDDO
1398	ENDDO
1399
1400	!
1401	!-- sgs-tke
1402	CASE ( 6 )
1403	DO i = nxl, nxr
1404	DO j = nys, nyn
1405	!
1406	!-- Determine topography-top index on scalar-grid
1407	k_wall = get_topography_top_index_ji( j, i, 's' )
1408
1409	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1410
1411	kk = k - k_wall !- lad arrays are defined flat
1412	tend(k,j,i) = tend(k,j,i) - &
1413	2.0_wp * cdc * &
1414	lad_s(kk,j,i) * &
1415	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1416	u(k,j,i+1) ) &
1417	)**2 + &
1418	( 0.5_wp * ( v(k,j,i) + &
1419	v(k,j+1,i) ) &
1420	)**2 + &
1421	( 0.5_wp * ( w(k,j,i) + &
1422	w(k+1,j,i) ) &
1423	)**2 &
1424	) * &
1425	e(k,j,i)
1426	ENDDO
1427	ENDDO
1428	ENDDO
1429	!
1430	!-- scalar concentration
1431	CASE ( 7 )
1432	DO i = nxl, nxr
1433	DO j = nys, nyn
1434	!
1435	!-- Determine topography-top index on scalar-grid
1436	k_wall = get_topography_top_index_ji( j, i, 's' )
1437
1438	DO k = k_wall+1, k_wall + pch_index_ji(j,i)
1439
1440	kk = k - k_wall !- lad arrays are defined flat
1441	tend(k,j,i) = tend(k,j,i) - &
1442	lsec * &
1443	lad_s(kk,j,i) * &
1444	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1445	u(k,j,i+1) ) &
1446	)**2 + &
1447	( 0.5_wp * ( v(k,j,i) + &
1448	v(k,j+1,i) ) &
1449	)**2 + &
1450	( 0.5_wp * ( w(k-1,j,i) + &
1451	w(k,j,i) ) &
1452	)**2 &
1453	) * &
1454	( s(k,j,i) - lsc )
1455	ENDDO
1456	ENDDO
1457	ENDDO
1458
1459
1460
1461	CASE DEFAULT
1462
1463	WRITE( message_string, * ) 'wrong component: ', component
1464	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
1465
1466	END SELECT
1467
1468	END SUBROUTINE pcm_tendency
1469
1470
1471	!------------------------------------------------------------------------------!
1472	! Description:
1473	! ------------
1474	!> Calculation of the tendency terms, accounting for the effect of the plant
1475	!> canopy on momentum and scalar quantities.
1476	!>
1477	!> The canopy is located where the leaf area density lad_s(k,j,i) > 0.0
1478	!> (defined on scalar grid), as initialized in subroutine pcm_init.
1479	!> The lad on the w-grid is vertically interpolated from the surrounding
1480	!> lad_s. The upper boundary of the canopy is defined on the w-grid at
1481	!> k = pch_index. Here, the lad is zero.
1482	!>
1483	!> The canopy drag must be limited (previously accounted for by calculation of
1484	!> a limiting canopy timestep for the determination of the maximum LES timestep
1485	!> in subroutine timestep), since it is physically impossible that the canopy
1486	!> drag alone can locally change the sign of a velocity component. This
1487	!> limitation is realized by calculating preliminary tendencies and velocities.
1488	!> It is subsequently checked if the preliminary new velocity has a different
1489	!> sign than the current velocity. If so, the tendency is limited in a way that
1490	!> the velocity can at maximum be reduced to zero by the canopy drag.
1491	!>
1492	!>
1493	!> Call for grid point i,j
1494	!------------------------------------------------------------------------------!
1495	SUBROUTINE pcm_tendency_ij( i, j, component )
1496
1497
1498	USE control_parameters, &
1499	ONLY: dt_3d, message_string
1500
1501	USE kinds
1502
1503	IMPLICIT NONE
1504
1505	INTEGER(iwp) :: component !< prognostic variable (u,v,w,pt,q,e)
1506	INTEGER(iwp) :: i !< running index
1507	INTEGER(iwp) :: j !< running index
1508	INTEGER(iwp) :: k !< running index
1509	INTEGER(iwp) :: k_wall !< vertical index of topography top
1510	INTEGER(iwp) :: kk !< running index for flat lad arrays
1511
1512	REAL(wp) :: ddt_3d !< inverse of the LES timestep (dt_3d)
1513	REAL(wp) :: lad_local !< local lad value
1514	REAL(wp) :: pre_tend !< preliminary tendency
1515	REAL(wp) :: pre_u !< preliminary u-value
1516	REAL(wp) :: pre_v !< preliminary v-value
1517	REAL(wp) :: pre_w !< preliminary w-value
1518
1519
1520	ddt_3d = 1.0_wp / dt_3d
1521	!
1522	!-- Compute drag for the three velocity components and the SGS-TKE
1523	SELECT CASE ( component )
1524
1525	!
1526	!-- u-component
1527	CASE ( 1 )
1528	!
1529	!-- Determine topography-top index on u-grid
1530	k_wall = get_topography_top_index_ji( j, i, 'u' )
1531	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1532
1533	kk = k - k_wall !- lad arrays are defined flat
1534
1535	!
1536	!-- In order to create sharp boundaries of the plant canopy,
1537	!-- the lad on the u-grid at index (k,j,i) is equal to lad_s(k,j,i),
1538	!-- rather than being interpolated from the surrounding lad_s,
1539	!-- because this would yield smaller lad at the canopy boundaries
1540	!-- than inside of the canopy.
1541	!-- For the same reason, the lad at the rightmost(i+1)canopy
1542	!-- boundary on the u-grid equals lad_s(k,j,i).
1543	lad_local = lad_s(kk,j,i)
1544	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j,i-1) > 0.0_wp ) THEN
1545	lad_local = lad_s(kk,j,i-1)
1546	ENDIF
1547
1548	pre_tend = 0.0_wp
1549	pre_u = 0.0_wp
1550	!
1551	!-- Calculate preliminary value (pre_tend) of the tendency
1552	pre_tend = - cdc * &
1553	lad_local * &
1554	SQRT( u(k,j,i)**2 + &
1555	( 0.25_wp * ( v(k,j,i-1) + &
1556	v(k,j,i) + &
1557	v(k,j+1,i) + &
1558	v(k,j+1,i-1) ) &
1559	)**2 + &
1560	( 0.25_wp * ( w(k-1,j,i-1) + &
1561	w(k-1,j,i) + &
1562	w(k,j,i-1) + &
1563	w(k,j,i) ) &
1564	)**2 &
1565	) * &
1566	u(k,j,i)
1567
1568	!
1569	!-- Calculate preliminary new velocity, based on pre_tend
1570	pre_u = u(k,j,i) + dt_3d * pre_tend
1571	!
1572	!-- Compare sign of old velocity and new preliminary velocity,
1573	!-- and in case the signs are different, limit the tendency
1574	IF ( SIGN(pre_u,u(k,j,i)) /= pre_u ) THEN
1575	pre_tend = - u(k,j,i) * ddt_3d
1576	ELSE
1577	pre_tend = pre_tend
1578	ENDIF
1579	!
1580	!-- Calculate final tendency
1581	tend(k,j,i) = tend(k,j,i) + pre_tend
1582	ENDDO
1583
1584
1585	!
1586	!-- v-component
1587	CASE ( 2 )
1588	!
1589	!-- Determine topography-top index on v-grid
1590	k_wall = get_topography_top_index_ji( j, i, 'v' )
1591
1592	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1593
1594	kk = k - k_wall !- lad arrays are defined flat
1595	!
1596	!-- In order to create sharp boundaries of the plant canopy,
1597	!-- the lad on the v-grid at index (k,j,i) is equal to lad_s(k,j,i),
1598	!-- rather than being interpolated from the surrounding lad_s,
1599	!-- because this would yield smaller lad at the canopy boundaries
1600	!-- than inside of the canopy.
1601	!-- For the same reason, the lad at the northmost(j+1)canopy
1602	!-- boundary on the v-grid equals lad_s(k,j,i).
1603	lad_local = lad_s(kk,j,i)
1604	IF ( lad_local == 0.0_wp .AND. lad_s(kk,j-1,i) > 0.0_wp ) THEN
1605	lad_local = lad_s(kk,j-1,i)
1606	ENDIF
1607
1608	pre_tend = 0.0_wp
1609	pre_v = 0.0_wp
1610	!
1611	!-- Calculate preliminary value (pre_tend) of the tendency
1612	pre_tend = - cdc * &
1613	lad_local * &
1614	SQRT( ( 0.25_wp * ( u(k,j-1,i) + &
1615	u(k,j-1,i+1) + &
1616	u(k,j,i) + &
1617	u(k,j,i+1) ) &
1618	)**2 + &
1619	v(k,j,i)**2 + &
1620	( 0.25_wp * ( w(k-1,j-1,i) + &
1621	w(k-1,j,i) + &
1622	w(k,j-1,i) + &
1623	w(k,j,i) ) &
1624	)**2 &
1625	) * &
1626	v(k,j,i)
1627
1628	!
1629	!-- Calculate preliminary new velocity, based on pre_tend
1630	pre_v = v(k,j,i) + dt_3d * pre_tend
1631	!
1632	!-- Compare sign of old velocity and new preliminary velocity,
1633	!-- and in case the signs are different, limit the tendency
1634	IF ( SIGN(pre_v,v(k,j,i)) /= pre_v ) THEN
1635	pre_tend = - v(k,j,i) * ddt_3d
1636	ELSE
1637	pre_tend = pre_tend
1638	ENDIF
1639	!
1640	!-- Calculate final tendency
1641	tend(k,j,i) = tend(k,j,i) + pre_tend
1642	ENDDO
1643
1644
1645	!
1646	!-- w-component
1647	CASE ( 3 )
1648	!
1649	!-- Determine topography-top index on w-grid
1650	k_wall = get_topography_top_index_ji( j, i, 'w' )
1651
1652	DO k = k_wall + 1, k_wall + pch_index_ji(j,i) - 1
1653
1654	kk = k - k_wall !- lad arrays are defined flat
1655
1656	pre_tend = 0.0_wp
1657	pre_w = 0.0_wp
1658	!
1659	!-- Calculate preliminary value (pre_tend) of the tendency
1660	pre_tend = - cdc * &
1661	(0.5_wp * &
1662	( lad_s(kk+1,j,i) + lad_s(kk,j,i) )) * &
1663	SQRT( ( 0.25_wp * ( u(k,j,i) + &
1664	u(k,j,i+1) + &
1665	u(k+1,j,i) + &
1666	u(k+1,j,i+1) ) &
1667	)**2 + &
1668	( 0.25_wp * ( v(k,j,i) + &
1669	v(k,j+1,i) + &
1670	v(k+1,j,i) + &
1671	v(k+1,j+1,i) ) &
1672	)**2 + &
1673	w(k,j,i)**2 &
1674	) * &
1675	w(k,j,i)
1676	!
1677	!-- Calculate preliminary new velocity, based on pre_tend
1678	pre_w = w(k,j,i) + dt_3d * pre_tend
1679	!
1680	!-- Compare sign of old velocity and new preliminary velocity,
1681	!-- and in case the signs are different, limit the tendency
1682	IF ( SIGN(pre_w,w(k,j,i)) /= pre_w ) THEN
1683	pre_tend = - w(k,j,i) * ddt_3d
1684	ELSE
1685	pre_tend = pre_tend
1686	ENDIF
1687	!
1688	!-- Calculate final tendency
1689	tend(k,j,i) = tend(k,j,i) + pre_tend
1690	ENDDO
1691
1692	!
1693	!-- potential temperature
1694	CASE ( 4 )
1695	!
1696	!-- Determine topography-top index on scalar grid
1697	k_wall = get_topography_top_index_ji( j, i, 's' )
1698
1699	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1700	kk = k - k_wall !- lad arrays are defined flat
1701	tend(k,j,i) = tend(k,j,i) + pc_heating_rate(kk,j,i)
1702	ENDDO
1703
1704
1705	!
1706	!-- humidity
1707	CASE ( 5 )
1708	!
1709	!-- Determine topography-top index on scalar grid
1710	k_wall = get_topography_top_index_ji( j, i, 's' )
1711
1712	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1713
1714	kk = k - k_wall
1715	tend(k,j,i) = tend(k,j,i) - &
1716	lsec * &
1717	lad_s(kk,j,i) * &
1718	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1719	u(k,j,i+1) ) &
1720	)**2 + &
1721	( 0.5_wp * ( v(k,j,i) + &
1722	v(k,j+1,i) ) &
1723	)**2 + &
1724	( 0.5_wp * ( w(k-1,j,i) + &
1725	w(k,j,i) ) &
1726	)**2 &
1727	) * &
1728	( q(k,j,i) - lsc )
1729	ENDDO
1730
1731	!
1732	!-- sgs-tke
1733	CASE ( 6 )
1734	!
1735	!-- Determine topography-top index on scalar grid
1736	k_wall = get_topography_top_index_ji( j, i, 's' )
1737
1738	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1739
1740	kk = k - k_wall
1741	tend(k,j,i) = tend(k,j,i) - &
1742	2.0_wp * cdc * &
1743	lad_s(kk,j,i) * &
1744	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1745	u(k,j,i+1) ) &
1746	)**2 + &
1747	( 0.5_wp * ( v(k,j,i) + &
1748	v(k,j+1,i) ) &
1749	)**2 + &
1750	( 0.5_wp * ( w(k,j,i) + &
1751	w(k+1,j,i) ) &
1752	)**2 &
1753	) * &
1754	e(k,j,i)
1755	ENDDO
1756
1757	!
1758	!-- scalar concentration
1759	CASE ( 7 )
1760	!
1761	!-- Determine topography-top index on scalar grid
1762	k_wall = get_topography_top_index_ji( j, i, 's' )
1763
1764	DO k = k_wall + 1, k_wall + pch_index_ji(j,i)
1765
1766	kk = k - k_wall
1767	tend(k,j,i) = tend(k,j,i) - &
1768	lsec * &
1769	lad_s(kk,j,i) * &
1770	SQRT( ( 0.5_wp * ( u(k,j,i) + &
1771	u(k,j,i+1) ) &
1772	)**2 + &
1773	( 0.5_wp * ( v(k,j,i) + &
1774	v(k,j+1,i) ) &
1775	)**2 + &
1776	( 0.5_wp * ( w(k-1,j,i) + &
1777	w(k,j,i) ) &
1778	)**2 &
1779	) * &
1780	( s(k,j,i) - lsc )
1781	ENDDO
1782
1783	CASE DEFAULT
1784
1785	WRITE( message_string, * ) 'wrong component: ', component
1786	CALL message( 'pcm_tendency', 'PA0279', 1, 2, 0, 6, 0 )
1787
1788	END SELECT
1789
1790	END SUBROUTINE pcm_tendency_ij
1791
1792
1793
1794	END MODULE plant_canopy_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |