source: palm/trunk/SOURCE/parin.f90 @ 487

Last change on this file since 487 was 482, checked in by raasch, 15 years ago

New:
---
compare_palm_logs is additionally compiled with mbuild -u (Makefile in trunk/UTIL)

make options (mopts) to be set by configuration file implemented (mrun, mbuild)

humidity=.T. is now usable for runs with topography. wall_humidityflux and
wall_scalarflux are the corresponding new parin arrays.
(check_parameters, init_3d_model, parin)

Large scale vertical motion (subsidence/ascent) can be applied to the
prognostic equation for the potential temperature. (check_parameters, header,
Makefile, modules, parin, prognostic_equations, read_var_list, subsidence,
write_var_list)

A simple method for installing and running palm (with limited features)
has been added. (Makefile, palm_simple_install, palm_simple_run)

Changed:


2d-decomposition is default for Cray-XT machines (init_pegrid)

var_ts is replaced by dots_max (modules,init_3d_model)

Every cloud droplet has now an own weighting factor and can be deleted due to
collisions. Condensation and collision of cloud droplets are adjusted
accordingly. (advec_particles)

Collision efficiency for large cloud droplets has changed according to table of
Rogers and Yau. (collision_efficiency)

Errors:


Bugfix for generating serial jobs (subjob)

Bugfix: index problem concerning gradient_level indices removed (header)

Dimension of array stat in cascade change to prevent type problems with
mpi2 libraries (poisfft_hybrid)

Loop was split to make runs reproducible when using ifort compiler.
(disturb_field)

Bugfix: exchange of ghost points for prho included (time_integration)

Bugfix: calculation of time-averaged surface heatfluxes (sum_up_3d_data)

Bugfix: calculation of precipitation_rate (calc_precipitation)

Bugfix: initial data assignments to some dvrp arrays changed due to error
messages from gfortran compiler (modules)

Bugfix: calculation of cloud droplet velocity (advec_particles)

Bugfix: transfer of particles at south/left edge (advec_particles)

Bugfix: calculation of collision_efficiency (collision_efficiency)

Bugfix: initialisation of var_mod (subsidence)

  • Property svn:keywords set to Id
File size: 15.8 KB
Line 
1 SUBROUTINE parin
2
3!------------------------------------------------------------------------------!
4! Current revisions:
5! -----------------
6!
7!
8! Former revisions:
9! -----------------
10! $Id: parin.f90 482 2010-02-05 06:37:03Z raasch $
11!
12! 449 2010-02-02 11:23:59Z raasch
13! +wall_humidityflux, wall_scalarflux
14! +ws_vertical_gradient, ws_vertical_gradient_level
15!
16! 410 2009-12-04 17:05:40Z letzel
17! masked data output: + dt_domask, mask_01~20_x|y|z, mask_01~20_x|y|z_loop,
18! mask_scale_x|y|z, masks, netcdf_format_mask[_av], skip_time_domask
19!
20! 291 2009-04-16 12:07:26Z raasch
21! +local_dvrserver_running in envpar
22! Output of messages replaced by message handling routine.
23! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
24! canyon_wall_south, conserve_volume_flow_mode, coupling_start_time,
25! dp_external, dp_level_b, dp_smooth, dpdxy, u_bulk, v_bulk in inipar
26! topography_grid_convention moved from userpar
27!
28! 197 2008-09-16 15:29:03Z raasch
29! +cthf,leaf_surface_concentration, scalar_exchange_coefficient
30! +inflow_damping_height, inflow_damping_width, recycling_width,
31! turbulent_inflow in inipar, -skip_time_dosp in d3par,
32! allocation of hom_sum moved from init_3d_model to here,
33! npex, npey moved from inipar to d3par, setting of myid_char_14 removed,
34! lad is allways allocated
35!
36! 138 2007-11-28 10:03:58Z letzel
37! +canopy_mode, drag_coefficient, lad_surface, lad_vertical_gradient,
38! lad_vertical_gradient_level, pch_index, plant_canopy,
39! +allocation of leaf area density field
40!
41! 108 2007-08-24 15:10:38Z letzel
42! +e_init, top_momentumflux_u|v in inipar, +dt_coupling in d3par
43!
44! 95 2007-06-02 16:48:38Z raasch
45! +bc_sa_t, bottom_salinityflux, ocean, sa_surface, sa_vertical_gradient,
46! sa_vertical_gradient_level, top_salinityflux in inipar,
47! sa_init is allocated
48!
49! 87 2007-05-22 15:46:47Z raasch
50! Size of hom increased by the maximum number of user-defined profiles,
51! var_hom renamed pr_palm
52!
53! 82 2007-04-16 15:40:52Z raasch
54! +return_addres, return_username in envpar
55!
56! 75 2007-03-22 09:54:05Z raasch
57! +dt_max, netcdf_64bit_3d, precipitation_amount_interval in d3par,
58! +loop_optimization, pt_reference in inipar, -data_output_ts,
59! moisture renamed humidity
60!
61! 20 2007-02-26 00:12:32Z raasch
62! +top_heatflux, use_top_fluxes in inipar
63!
64! -netcdf_64bit_3d
65!
66! 3 2007-02-13 11:30:58Z raasch
67! +netcdf_64bit_3d in d3par,
68! RCS Log replace by Id keyword, revision history cleaned up
69!
70! Revision 1.57  2007/02/11 13:11:22  raasch
71! Values of environment variables are now read from file ENVPAR instead of
72! reading them with a system call, + NAMELIST envpar
73!
74! Revision 1.1  1997/07/24 11:22:50  raasch
75! Initial revision
76!
77!
78! Description:
79! ------------
80! This subroutine reads variables controling the run from the NAMELIST files
81!------------------------------------------------------------------------------!
82
83    USE arrays_3d
84    USE averaging
85    USE control_parameters
86    USE dvrp_variables
87    USE grid_variables
88    USE indices
89    USE model_1d
90    USE pegrid
91    USE profil_parameter
92    USE statistics
93
94    IMPLICIT NONE
95
96    INTEGER ::  idum
97
98
99    NAMELIST /inipar/  adjust_mixing_length, alpha_surface, bc_e_b, bc_lr, &
100                       bc_ns, bc_p_b, bc_p_t, bc_pt_b, bc_pt_t, bc_q_b, &
101             bc_q_t,bc_s_b, bc_s_t, bc_sa_t, bc_uv_b, bc_uv_t, &
102             bottom_salinityflux, building_height, building_length_x, &
103             building_length_y, building_wall_left, building_wall_south, &
104             canopy_mode, canyon_height, canyon_width_x, canyon_width_y, &
105             canyon_wall_left, canyon_wall_south, cloud_droplets, &
106             cloud_physics, conserve_volume_flow, conserve_volume_flow_mode, &
107             coupling_start_time, cthf, cut_spline_overshoot, &
108             damp_level_1d, dissipation_1d, dp_external, dp_level_b, &
109             dp_smooth, dpdxy, drag_coefficient, dt, dt_pr_1d, &
110             dt_run_control_1d, dx, dy, dz, dz_max, dz_stretch_factor, & 
111             dz_stretch_level, e_init, e_min, end_time_1d, fft_method, &
112             galilei_transformation, grid_matching, humidity, &
113             inflow_damping_height, inflow_damping_width, &
114             inflow_disturbance_begin, inflow_disturbance_end, &
115             initializing_actions, km_constant, km_damp_max, lad_surface, &
116             lad_vertical_gradient, lad_vertical_gradient_level, &
117             leaf_surface_concentration, long_filter_factor, &
118             loop_optimization, mixing_length_1d, masks, momentum_advec, &
119             netcdf_precision, nsor_ini, nx, ny, &
120             nz, ocean, omega, outflow_damping_width, overshoot_limit_e, &
121             overshoot_limit_pt, overshoot_limit_u, overshoot_limit_v, &
122             overshoot_limit_w, passive_scalar, pch_index, phi, & 
123             plant_canopy, prandtl_layer, precipitation, pt_reference, &
124             pt_surface, pt_surface_initial_change, pt_vertical_gradient, &
125             pt_vertical_gradient_level, q_surface, q_surface_initial_change, &
126             q_vertical_gradient, q_vertical_gradient_level, radiation, &
127             random_generator, random_heatflux, recycling_width, rif_max, &
128             rif_min, roughness_length, sa_surface, sa_vertical_gradient, &
129             sa_vertical_gradient_level, scalar_advec, &
130             scalar_exchange_coefficient, statistic_regions, &
131             surface_heatflux, surface_pressure, surface_scalarflux, &
132             surface_waterflux, s_surface, s_surface_initial_change, &
133             s_vertical_gradient, s_vertical_gradient_level, timestep_scheme, &
134             topography, topography_grid_convention, top_heatflux, &
135             top_momentumflux_u, top_momentumflux_v, &
136             top_salinityflux, turbulent_inflow, ug_surface, &
137             ug_vertical_gradient, ug_vertical_gradient_level, u_bulk, &
138             ups_limit_e, ups_limit_pt, ups_limit_u, ups_limit_v, ups_limit_w, &
139             use_surface_fluxes, use_top_fluxes, use_ug_for_galilei_tr, &
140             use_upstream_for_tke, vg_surface, vg_vertical_gradient, &
141             vg_vertical_gradient_level, v_bulk, wall_adjustment, &
142             wall_heatflux, wall_humidityflux, wall_scalarflux, &
143             ws_vertical_gradient, ws_vertical_gradient_level
144
145
146    NAMELIST /d3par/   averaging_interval,  averaging_interval_pr, &
147                       call_psolver_at_all_substeps, cfl_factor, &
148                       create_disturbances, cross_normalized_x, &
149                       cross_normalized_y, cross_profiles, cross_ts_uymax, &
150                       cross_ts_uymin, cross_xtext, cycle_mg, data_output, &
151                       data_output_format, &
152                       data_output_mask_01, data_output_mask_02, &
153                       data_output_mask_03, data_output_mask_04, &
154                       data_output_mask_05, data_output_mask_06, &
155                       data_output_mask_07, data_output_mask_08, &
156                       data_output_mask_09, data_output_mask_10, &
157                       data_output_mask_11, data_output_mask_12, &
158                       data_output_mask_13, data_output_mask_14, &
159                       data_output_mask_15, data_output_mask_16, &
160                       data_output_mask_17, data_output_mask_18, &
161                       data_output_mask_19, data_output_mask_20, &
162                       data_output_pr, &
163                       data_output_2d_on_each_pe, disturbance_amplitude, &
164                       disturbance_energy_limit, disturbance_level_b, &
165                       disturbance_level_t, do2d_at_begin, do3d_at_begin, &
166                       do3d_compress, do3d_comp_prec, dt, dt_averaging_input, &
167                       dt_averaging_input_pr, dt_coupling, dt_data_output, &
168                       dt_data_output_av, dt_disturb, dt_domask, dt_dopr, &
169                       dt_dopr_listing, dt_dots, dt_do2d_xy, dt_do2d_xz, &
170                       dt_do2d_yz, dt_do3d, dt_max, dt_restart, dt_run_control,&
171                       end_time, force_print_header, &
172                       mask_scale_x, mask_scale_y, mask_scale_z, &
173                       mask_01_x, mask_02_x, mask_03_x, mask_04_x, &
174                       mask_05_x, mask_06_x, mask_07_x, mask_08_x, &
175                       mask_09_x, mask_10_x, mask_11_x, mask_12_x, &
176                       mask_13_x, mask_14_x, mask_15_x, mask_16_x, &
177                       mask_17_x, mask_18_x, mask_19_x, mask_20_x, &
178                       mask_01_y, mask_02_y, mask_03_y, mask_04_y, &
179                       mask_05_y, mask_06_y, mask_07_y, mask_08_y, &
180                       mask_09_y, mask_10_y, mask_11_y, mask_12_y, &
181                       mask_13_y, mask_14_y, mask_15_y, mask_16_y, &
182                       mask_17_y, mask_18_y, mask_19_y, mask_20_y, &
183                       mask_01_z, mask_02_z, mask_03_z, mask_04_z, &
184                       mask_05_z, mask_06_z, mask_07_z, mask_08_z, &
185                       mask_09_z, mask_10_z, mask_11_z, mask_12_z, &
186                       mask_13_z, mask_14_z, mask_15_z, mask_16_z, &
187                       mask_17_z, mask_18_z, mask_19_z, mask_20_z, &
188                       mask_01_x_loop, mask_02_x_loop, mask_03_x_loop, &
189                       mask_04_x_loop, mask_05_x_loop, mask_06_x_loop, &
190                       mask_07_x_loop, mask_08_x_loop, mask_09_x_loop, &
191                       mask_10_x_loop, mask_11_x_loop, mask_12_x_loop, &
192                       mask_13_x_loop, mask_14_x_loop, mask_15_x_loop, &
193                       mask_16_x_loop, mask_17_x_loop, mask_18_x_loop, &
194                       mask_19_x_loop, mask_20_x_loop, &
195                       mask_01_y_loop, mask_02_y_loop, mask_03_y_loop, &
196                       mask_04_y_loop, mask_05_y_loop, mask_06_y_loop, &
197                       mask_07_y_loop, mask_08_y_loop, mask_09_y_loop, &
198                       mask_10_y_loop, mask_11_y_loop, mask_12_y_loop, &
199                       mask_13_y_loop, mask_14_y_loop, mask_15_y_loop, &
200                       mask_16_y_loop, mask_17_y_loop, mask_18_y_loop, &
201                       mask_19_y_loop, mask_20_y_loop, &
202                       mask_01_z_loop, mask_02_z_loop, mask_03_z_loop, &
203                       mask_04_z_loop, mask_05_z_loop, mask_06_z_loop, &
204                       mask_07_z_loop, mask_08_z_loop, mask_09_z_loop, &
205                       mask_10_z_loop, mask_11_z_loop, mask_12_z_loop, &
206                       mask_13_z_loop, mask_14_z_loop, mask_15_z_loop, &
207                       mask_16_z_loop, mask_17_z_loop, mask_18_z_loop, &
208                       mask_19_z_loop, mask_20_z_loop, &
209                       mg_cycles, mg_switch_to_pe0_level, &
210                       netcdf_64bit, netcdf_64bit_3d, &
211                       netcdf_format_mask, netcdf_format_mask_av, &
212                       ngsrb, normalizing_region, npex, npey, nsor, nz_do3d, &
213                       omega_sor, &
214                       prandtl_number, precipitation_amount_interval, &
215                       profile_columns, profile_rows, psolver, &
216                       rayleigh_damping_factor, rayleigh_damping_height, &
217                       residual_limit, restart_time, section_xy, section_xz, &
218                       section_yz, skip_time_data_output, &
219                       skip_time_data_output_av, skip_time_dopr, &
220                       skip_time_do2d_xy, skip_time_do2d_xz, &
221                       skip_time_do2d_yz, skip_time_do3d, skip_time_domask, &
222                       termination_time_needed, use_prior_plot1d_parameters, &
223                       z_max_do1d, z_max_do1d_normalized, z_max_do2d
224
225
226    NAMELIST /envpar/  host, local_dvrserver_running, maximum_cpu_time_allowed,  &
227                       revision, return_addres, return_username, run_identifier, &
228                       tasks_per_node, write_binary
229
230!
231!-- Open the NAMELIST-file which is send with this job
232    CALL check_open( 11 )
233
234!
235!-- Read the control parameters for initialization.
236!-- The namelist "inipar" must be provided in the NAMELIST-file. If this is
237!-- not the case and the file contains - instead of "inipar" - any other
238!-- namelist, a read error is created on t3e and control is transferred
239!-- to the statement with label 10. Therefore, on t3e machines one can not
240!-- distinguish between errors produced by a wrong "inipar" namelist or
241!-- because this namelist is totally missing.
242    READ ( 11, inipar, ERR=10, END=11 )
243    GOTO 12
244 10 message_string = 'errors in \$inipar &or no \$inipar-namelist ' // &
245                     'found (CRAY-machines only)'
246    CALL message( 'parin', 'PA0271', 1, 2, 0, 6, 0 )
247
248 11 message_string = 'no \$inipar-namelist found'
249    CALL message( 'parin', 'PA0272', 1, 2, 0, 6, 0 )
250
251!
252!-- If required, read control parameters from restart file (produced by
253!-- a prior run). All PEs are reading from file created by PE0 (see check_open)
254 12 IF ( TRIM( initializing_actions ) == 'read_restart_data' )  THEN
255
256       CALL read_var_list
257!
258!--    The restart file will be reopened when reading the subdomain data
259       CALL close_file( 13 )
260
261!
262!--    Increment the run count
263       runnr = runnr + 1
264
265    ENDIF
266
267!
268!-- Definition of names of areas used for computing statistics. They must
269!-- be defined at this place, because they are allowed to be redefined by
270!-- the user in user_parin.
271    region = 'total domain'
272
273!
274!-- Read runtime parameters given by the user for this run (namelist "d3par").
275!-- The namelist "d3par" can be omitted. In that case, default values are
276!-- used for the parameters.
277    READ ( 11, d3par, END=20 )
278
279!
280!-- Read control parameters for optionally used model software packages
281 20 CALL package_parin
282
283!
284!-- Read user-defined variables
285    CALL user_parin
286
287!
288!-- Check in case of initial run, if the grid point numbers are well defined
289!-- and allocate some arrays which are already needed in init_pegrid or
290!-- check_parameters. During restart jobs, these arrays will be allocated
291!-- in read_var_list. All other arrays are allocated in init_3d_model.
292    IF ( TRIM( initializing_actions ) /= 'read_restart_data' )  THEN
293
294       IF ( nx <= 0 )  THEN
295          WRITE( message_string, * ) 'no value or wrong value given for nx: ',&
296                                     'nx=', nx
297          CALL message( 'parin', 'PA0273', 1, 2, 0, 6, 0 )
298       ENDIF
299       IF ( ny <= 0 )  THEN
300          WRITE( message_string, * ) 'no value or wrong value given for ny: ',&
301                                     'ny=', ny
302          CALL message( 'parin', 'PA0274', 1, 2, 0, 6, 0 )
303       ENDIF
304       IF ( nz <= 0 )  THEN
305          WRITE( message_string, * ) 'no value or wrong value given for nz: ',&
306                                     'nz=', nz
307          CALL message( 'parin', 'PA0275', 1, 2, 0, 6, 0 )
308       ENDIF
309!
310!--    ATTENTION: in case of changes to the following statement please also
311!--    check the allocate statement in routine read_var_list
312       ALLOCATE( lad(0:nz+1),pt_init(0:nz+1), q_init(0:nz+1), sa_init(0:nz+1), &
313                 ug(0:nz+1), u_init(0:nz+1), v_init(0:nz+1), vg(0:nz+1),       &
314                 hom(0:nz+1,2,pr_palm+max_pr_user,0:statistic_regions),        &
315                 hom_sum(0:nz+1,pr_palm+max_pr_user,0:statistic_regions) )
316       hom = 0.0
317
318    ENDIF
319
320!
321!-- NAMELIST-file is not needed anymore
322    CALL close_file( 11 )
323
324!
325!-- Read values of environment variables (this NAMELIST file is generated by
326!-- mrun)
327    OPEN ( 90, FILE='ENVPAR', STATUS='OLD', FORM='FORMATTED', ERR=30 )
328    READ ( 90, envpar, ERR=31, END=32 )
329    CLOSE ( 90 )
330    RETURN
331
332 30 message_string = 'local file ENVPAR not found' // &
333                     '&some variables for steering may not be properly set'
334    CALL message( 'parin', 'PA0276', 0, 1, 0, 6, 0 )
335    RETURN
336
337 31 message_string = 'errors in local file ENVPAR' // &
338                     '&some variables for steering may not be properly set'
339    CALL message( 'parin', 'PA0277', 0, 1, 0, 6, 0 )
340    RETURN
341
342 32 message_string = 'no envpar-NAMELIST found in local file ENVPAR'  // &
343                     '&some variables for steering may not be properly set'
344    CALL message( 'parin', 'PA0278', 0, 1, 0, 6, 0 )
345
346 END SUBROUTINE parin
Note: See TracBrowser for help on using the repository browser.