Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4383

Last change on this file since 4383 was 4361, checked in by suehring, 4 years ago
Plant-canopy: Avoid an unnecessary exchange of ghost points; remove unused arrays in pcm_rrd_local
Property svn:keywords set to `Id`
File size: 85.4 KB

Rev	Line
[3637]	1	!> @file module_interface.f90
	2	!------------------------------------------------------------------------------!
	3	! This file is part of PALM.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[3637]	18	!------------------------------------------------------------------------------!
	19	!
	20	! Current revisions:
	21	! -----------------
	22	!
[3745]	23	!
[3637]	24	! Former revisions:
	25	! -----------------
[3770]	26	! $Id: module_interface.f90 4361 2020-01-07 12:22:38Z Giersch $
[4361]	27	! Remove unused arrays in pmc_rrd_local
	28	!
	29	! 4360 2020-01-07 11:25:50Z suehring
[4360]	30	! Add pcm_rrd_local and pcm_wrd_local
	31	!
	32	! 4331 2019-12-10 18:25:02Z suehring
[4331]	33	! Change interface for doq_check_data_output, in order to perform further
	34	! output checks.
	35	!
	36	! 4281 2019-10-29 15:15:39Z schwenkel
[4281]	37	! Added dynamics boundary conditions
	38	!
	39	! 4272 2019-10-23 15:18:57Z schwenkel
[4272]	40	! Further modularization of boundary conditions: moved boundary conditions to
	41	! respective modules
	42	!
	43	! 4268 2019-10-17 11:29:38Z schwenkel
[4268]	44	! Introduction of module_interface_boundary_conditions
	45	!
	46	! 4182 2019-08-22 15:20:23Z scharf
[4182]	47	! Corrected "Former revisions" section
	48	!
	49	! 4173 2019-08-20 12:04:06Z gronemeier
[4173]	50	! add vdi_internal_controls
	51	!
	52	! 4157 2019-08-14 09:19:12Z suehring
[4157]	53	! Call doq_init from module interface
	54	!
	55	! 4132 2019-08-02 12:34:17Z suehring
[4132]	56	! Bugfix in masked data output for diagnostic quantities
	57	!
	58	! 4131 2019-08-02 11:06:18Z monakurppa
[4127]	59	! Add output of 3D plant-canopy outputs (merge from branch resler)
	60	!
	61	! 4048 2019-06-21 21:00:21Z knoop
[4048]	62	! Moved turbulence_closure_mod calls into this module_interface
	63	!
	64	! 4047 2019-06-21 18:58:09Z knoop
[4047]	65	! Introduction of the dynamics module
	66	!
	67	! 4039 2019-06-18 10:32:41Z suehring
[4039]	68	! Introduce diagnostic output
[4047]	69	!
[4039]	70	! 4028 2019-06-13 12:21:37Z schwenkel
[4028]	71	! Further modularization of particle code components
[4047]	72	!
[4028]	73	! 4017 2019-06-06 12:16:46Z schwenkel
[4047]	74	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
[4004]	75	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
[4047]	76	! are not defined everywhere, e.g. land-surface outputs, this will be
	77	! problematic as NaN will be output.
	78	!
[4004]	79	! 3987 2019-05-22 09:52:13Z kanani
[3987]	80	! Introduce switchable DEBUG file output via debug_message routine
[4047]	81	!
[3987]	82	! 3956 2019-05-07 12:32:52Z monakurppa
[4047]	83	! - Added calls for salsa_non_advective_processes and
[3956]	84	! salsa_exchange_horiz_bounds
	85	! - Moved the call for salsa_data_output_2d/3d before that of
	86	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
	87	! salsa output variable and encounters a segmentation fault for "Ntot" due
	88	! to the shortoutput name
[4047]	89	!
[3956]	90	! 3931 2019-04-24 16:34:28Z schwenkel
[3931]	91	! Changed non_transport_physics to non_advective_processes
[4047]	92	!
[3931]	93	! 3930 2019-04-24 14:57:18Z forkel
[3929]	94	! Correct/complete module_interface introduction for chemistry model
	95	!
	96	! 3887 2019 -04-12 08:47:41Z schwenkel
[4047]	97	! Changes related to global restructuring of location messages and introduction
[3885]	98	! of additional debug messages
[4047]	99	!
[3929]	100	! 3880 2019 -04-08 21:43:02Z knoop
[3864]	101	! Add a call for salsa_prognostic_equations
[4047]	102	!
[3864]	103	! 3840 2019-03-29 10:35:52Z knoop
[3806]	104	! bugfix: intent of dummy arguments changed to inout
[4047]	105	!
[3806]	106	! 3770 2019-02-28 11:22:32Z moh.hefny
[3769]	107	! removed unused variables in module_interface_check_data_output_ts
[3770]	108	!
[3769]	109	! 3767 08:18:02Z raasch
[3767]	110	! unused variable file_index removed from subroutine parameter list
[4047]	111	!
[3767]	112	! 3766 2019-02-26 16:23:41Z raasch
[3766]	113	! first argument removed from module_interface_rrd_*, statement added to avoid
	114	! compiler warning about unused variable, file reformatted with respect to coding
	115	! standards
[4047]	116	!
[3766]	117	! 3762 2019-02-25 16:54:16Z suehring
[3762]	118	! only pass required arguments to surface_data_output_rrd_local
[4047]	119	!
[3762]	120	! 3747 2019-02-16 15:15:23Z gronemeier
[3747]	121	! Call user_init_arrays
[4047]	122	!
[3747]	123	! 3745 2019-02-15 18:57:56Z suehring
[3745]	124	! Add indoor model
[4047]	125	!
[3745]	126	! 3744 2019-02-15 18:38:58Z suehring
[3739]	127	! Removed bio_check_parameters as the method is empty.
[4047]	128	!
[3739]	129	! 3735 2019-02-12 09:52:40Z dom_dwd_user
[4047]	130	! Accepting variable j from check_parameters and passing it to
[3735]	131	! bio_check_data_output
	132	! Add required restart data for surface output module
[4047]	133	!
[3735]	134	! 3731 2019-02-11 13:06:27Z suehring
[3717]	135	! Add check_parameters routine for virtual measurements
[4047]	136	!
[3717]	137	! 3711 2019-01-31 13:44:26Z knoop
[3711]	138	! Introduced module_interface_init_checks for post-init checks
[4047]	139	!
[3711]	140	! 3705 2019-01-29 19:56:39Z suehring
[3705]	141	! Add last_actions for virtual measurements
[4047]	142	!
[3705]	143	! 3704 2019-01-29 19:51:41Z suehring
[3685]	144	! Some interface calls moved to module_interface + cleanup
[4047]	145	!
[3685]	146	! 3684 2019-01-20 20:20:58Z knoop
[3655]	147	! Bugfix: made unit intend INOUT
[4047]	148	!
[3655]	149	! 3650 2019-01-04 13:01:33Z kanani
[3650]	150	! Add restart routines for biometeorology
[4047]	151	!
[3650]	152	! 3649 2019-01-02 16:52:21Z suehring
[3649]	153	! Initialize strings, in order to avoid compiler warnings for non-initialized
	154	! characters with intent(out) attribute
[4047]	155	!
[3649]	156	! 3648 2019-01-02 16:35:46Z suehring
[4182]	157	! 3641 2018-12-23 22:10:01Z knoop
	158	! Initial implementation of the PALM module interface
[4047]	159	!
[3637]	160	!
	161	! Description:
	162	! ------------
	163	!> This is the interface between the PALM model core and all its modules.
	164	!>
[3731]	165	!> @todo Re-format module to be consistent with coding standard
[3637]	166	!------------------------------------------------------------------------------!
[3766]	167	MODULE module_interface
[3637]	168
[3766]	169	USE indices, &
	170	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
[3637]	171
[3766]	172	USE kinds
[3637]	173
[3766]	174	!
	175	!-- load module-specific control parameters.
	176	!-- ToDo: move all of them to respective module or a dedicated central module
[4047]	177
	178	USE dynamics_mod, &
	179	ONLY: dynamics_parin, &
	180	dynamics_check_parameters, &
	181	dynamics_check_data_output_ts, &
	182	dynamics_check_data_output_pr, &
	183	dynamics_check_data_output, &
	184	dynamics_init_masks, &
	185	dynamics_define_netcdf_grid, &
	186	dynamics_init_arrays, &
	187	dynamics_init, &
	188	dynamics_init_checks, &
	189	dynamics_header, &
	190	dynamics_actions, &
	191	dynamics_non_advective_processes, &
	192	dynamics_exchange_horiz, &
	193	dynamics_prognostic_equations, &
[4281]	194	dynamics_boundary_conditions, &
[4047]	195	dynamics_swap_timelevel, &
	196	dynamics_3d_data_averaging, &
	197	dynamics_data_output_2d, &
	198	dynamics_data_output_3d, &
	199	dynamics_statistics, &
	200	dynamics_rrd_global, &
	201	dynamics_rrd_local, &
	202	dynamics_wrd_global, &
	203	dynamics_wrd_local, &
	204	dynamics_last_actions
	205
	206	USE turbulence_closure_mod, &
[4048]	207	ONLY: tcm_check_parameters, &
	208	tcm_check_data_output, &
	209	tcm_init_arrays, &
	210	tcm_init, &
	211	tcm_actions, &
	212	tcm_prognostic_equations, &
[4281]	213	tcm_boundary_conds, &
[4048]	214	tcm_swap_timelevel, &
	215	tcm_3d_data_averaging, &
	216	tcm_data_output_2d, &
	217	tcm_data_output_3d
[4047]	218
[3766]	219	USE control_parameters, &
[3987]	220	ONLY: air_chemistry, &
	221	biometeorology, &
	222	debug_output, &
	223	debug_output_timestep, &
[3766]	224	indoor_model, &
	225	land_surface, &
	226	large_scale_forcing, &
	227	nesting_offline, &
	228	nudging, &
	229	ocean_mode, &
	230	plant_canopy, &
	231	salsa, &
	232	surface_output, &
	233	syn_turb_gen, &
	234	urban_surface, &
[4173]	235	vdi_checks, &
[3766]	236	virtual_flight, &
	237	virtual_measurement, &
	238	wind_turbine
[3637]	239
[3766]	240	!
	241	!-- load interface routines of all PALM modules
	242	USE biometeorology_mod, &
	243	ONLY: bio_parin, &
	244	bio_check_data_output, &
	245	bio_init, &
	246	bio_init_checks, &
	247	bio_header, &
	248	bio_3d_data_averaging, &
	249	bio_data_output_2d, &
	250	bio_data_output_3d, &
	251	bio_rrd_global, &
	252	bio_rrd_local, &
	253	bio_wrd_global, &
	254	bio_wrd_local
[3637]	255
[3766]	256	USE bulk_cloud_model_mod, &
	257	ONLY: bulk_cloud_model, &
	258	bcm_parin, &
	259	bcm_check_parameters, &
	260	bcm_check_data_output_pr, &
	261	bcm_check_data_output, &
	262	bcm_init_arrays, &
	263	bcm_init, &
	264	bcm_header, &
[3870]	265	bcm_actions, &
[3931]	266	bcm_non_advective_processes, &
[3956]	267	bcm_exchange_horiz, &
[3870]	268	bcm_prognostic_equations, &
[4268]	269	bcm_boundary_conditions, &
[3766]	270	bcm_swap_timelevel, &
	271	bcm_3d_data_averaging, &
	272	bcm_data_output_2d, &
	273	bcm_data_output_3d, &
	274	bcm_rrd_global, &
	275	bcm_wrd_global, &
	276	bcm_rrd_local, &
	277	bcm_wrd_local
[3637]	278
	279	USE chemistry_model_mod, &
	280	ONLY: chem_parin, &
	281	chem_check_parameters, &
	282	chem_check_data_output_pr, &
	283	chem_check_data_output, &
[3929]	284	chem_exchange_horiz_bounds, &
[3685]	285	chem_init_arrays, &
	286	chem_init, &
[3637]	287	chem_header, &
[3877]	288	chem_actions, &
[3930]	289	chem_non_advective_processes, &
[3880]	290	chem_prognostic_equations, &
[4268]	291	chem_boundary_conditions, &
[3637]	292	chem_swap_timelevel, &
	293	chem_3d_data_averaging, &
	294	chem_data_output_2d, &
	295	chem_data_output_3d, &
	296	chem_statistics, &
	297	chem_rrd_local, &
[3887]	298	chem_wrd_local
[4047]	299
	300	USE diagnostic_output_quantities_mod, &
[4039]	301	ONLY: doq_3d_data_averaging, &
	302	doq_check_data_output, &
	303	doq_define_netcdf_grid, &
[4157]	304	doq_init, &
[4039]	305	doq_output_2d, &
	306	doq_output_3d, &
	307	doq_wrd_local
	308	! doq_rrd_local, &
[3637]	309
[3766]	310	USE flight_mod, &
	311	ONLY: flight_parin, &
	312	flight_header, &
	313	flight_init, &
	314	flight_rrd_global, &
	315	flight_wrd_global
[3637]	316
[3766]	317	USE gust_mod, &
	318	ONLY: gust_module_enabled, &
	319	gust_parin, &
	320	gust_check_parameters, &
	321	gust_check_data_output_pr, &
	322	gust_check_data_output, &
	323	gust_init_arrays, &
	324	gust_init, &
	325	gust_header, &
	326	gust_actions, &
[3837]	327	gust_prognostic_equations, &
[3766]	328	gust_swap_timelevel, &
	329	gust_3d_data_averaging, &
	330	gust_data_output_2d, &
	331	gust_data_output_3d, &
	332	gust_statistics, &
	333	gust_rrd_global, &
	334	gust_wrd_global, &
	335	gust_rrd_local, &
	336	gust_wrd_local
[3637]	337
[3766]	338	USE indoor_model_mod, &
	339	ONLY: im_parin, &
	340	im_check_data_output, &
	341	im_check_parameters, &
	342	im_data_output_3d, &
	343	im_init
[4047]	344
[4017]	345	USE lagrangian_particle_model_mod, &
	346	ONLY: lpm_parin, &
	347	lpm_header, &
	348	lpm_check_parameters, &
[4047]	349	lpm_init_arrays, &
[4017]	350	lpm_init, &
	351	lpm_actions, &
	352	lpm_rrd_global, &
	353	lpm_rrd_local, &
	354	lpm_wrd_local, &
	355	lpm_wrd_global
[4047]	356
[3766]	357	USE land_surface_model_mod, &
	358	ONLY: lsm_parin, &
	359	lsm_check_parameters, &
	360	lsm_check_data_output_pr, &
	361	lsm_check_data_output, &
	362	lsm_init_arrays, &
	363	lsm_init, &
	364	lsm_header, &
	365	lsm_swap_timelevel, &
	366	lsm_3d_data_averaging, &
	367	lsm_data_output_2d, &
	368	lsm_rrd_local, &
	369	lsm_wrd_local
[3637]	370
[3766]	371	USE lsf_nudging_mod, &
	372	ONLY: lsf_nudging_check_parameters, &
	373	lsf_nudging_check_data_output_pr, &
	374	lsf_init, &
	375	nudge_init, &
	376	lsf_nudging_header
[3637]	377
[3766]	378	USE multi_agent_system_mod, &
	379	ONLY: mas_parin
[3637]	380
[3766]	381	USE nesting_offl_mod, &
	382	ONLY: nesting_offl_parin, &
	383	nesting_offl_check_parameters, &
	384	nesting_offl_header
[3637]	385
[3766]	386	USE ocean_mod, &
	387	ONLY: ocean_parin, &
	388	ocean_check_parameters, &
	389	ocean_check_data_output_pr, &
	390	ocean_check_data_output, &
	391	ocean_init_arrays, &
	392	ocean_init, &
	393	ocean_header, &
[3873]	394	ocean_actions, &
[3840]	395	ocean_prognostic_equations, &
[4272]	396	ocean_boundary_conditions, &
[3766]	397	ocean_swap_timelevel, &
	398	ocean_3d_data_averaging, &
	399	ocean_data_output_2d, &
	400	ocean_data_output_3d, &
	401	ocean_rrd_global, &
	402	ocean_wrd_global, &
	403	ocean_rrd_local, &
	404	ocean_wrd_local
[4047]	405
[4017]	406	USE particle_attributes, &
[4047]	407	ONLY: particle_advection
[3637]	408
[3766]	409	USE plant_canopy_model_mod, &
	410	ONLY: pcm_parin, &
	411	pcm_check_parameters, &
	412	pcm_check_data_output, &
	413	pcm_init, &
	414	pcm_header, &
[4127]	415	pcm_3d_data_averaging, &
[4360]	416	pcm_data_output_3d, &
	417	pcm_rrd_local, &
	418	pcm_wrd_local
[3637]	419
[3766]	420	USE radiation_model_mod, &
	421	ONLY: radiation, &
	422	radiation_parin, &
	423	radiation_check_parameters, &
	424	radiation_check_data_output_ts, &
	425	radiation_check_data_output_pr, &
	426	radiation_check_data_output, &
	427	radiation_init, &
	428	radiation_header, &
	429	radiation_3d_data_averaging, &
	430	radiation_data_output_2d, &
	431	radiation_data_output_3d, &
	432	radiation_rrd_local, &
	433	radiation_wrd_local
[3637]	434
[3766]	435	USE salsa_mod, &
	436	ONLY: salsa_parin, &
	437	salsa_check_parameters, &
[4131]	438	salsa_check_data_output_pr, &
[3766]	439	salsa_check_data_output, &
	440	salsa_init_arrays, &
	441	salsa_init, &
	442	salsa_header, &
[3871]	443	salsa_actions, &
[3956]	444	salsa_non_advective_processes, &
	445	salsa_exchange_horiz_bounds, &
[3864]	446	salsa_prognostic_equations, &
[4268]	447	salsa_boundary_conditions, &
[3766]	448	salsa_swap_timelevel, &
	449	salsa_3d_data_averaging, &
	450	salsa_data_output_2d, &
	451	salsa_data_output_3d, &
[4131]	452	salsa_statistics, &
[3766]	453	salsa_rrd_local, &
	454	salsa_wrd_local
[3637]	455
[3766]	456	USE spectra_mod, &
	457	ONLY: calculate_spectra, &
	458	spectra_parin, &
	459	spectra_check_parameters, &
	460	spectra_header
[3637]	461
[3766]	462	USE surface_data_output_mod, &
	463	ONLY: surface_data_output_parin, &
	464	surface_data_output_check_parameters, &
	465	surface_data_output_init_arrays, &
	466	surface_data_output_rrd_local, &
	467	surface_data_output_rrd_global, &
	468	surface_data_output_wrd_local, &
	469	surface_data_output_wrd_global
[3637]	470
[3766]	471	USE synthetic_turbulence_generator_mod, &
	472	ONLY: stg_parin, &
	473	stg_check_parameters, &
	474	stg_header, &
	475	stg_rrd_global, &
	476	stg_wrd_global
[3637]	477
[3766]	478	USE urban_surface_mod, &
	479	ONLY: usm_parin, &
	480	usm_check_parameters, &
	481	usm_check_data_output, &
	482	usm_init_arrays, &
	483	usm_init, &
	484	usm_swap_timelevel, &
	485	usm_3d_data_averaging, &
	486	usm_rrd_local, &
	487	usm_wrd_local
[3637]	488
[4173]	489	USE vdi_internal_controls, &
	490	ONLY: vdi_actions
	491
[4047]	492	USE virtual_measurement_mod, &
	493	ONLY: vm_check_parameters, &
	494	vm_init, &
	495	vm_last_actions, &
	496	vm_parin
	497
	498	USE wind_turbine_model_mod, &
	499	ONLY: wtm_parin, &
	500	wtm_check_parameters, &
	501	wtm_init_arrays, &
	502	wtm_init, &
	503	wtm_actions, &
	504	wtm_rrd_global, &
	505	wtm_wrd_global
	506
[3766]	507	USE user, &
	508	ONLY: user_module_enabled, &
	509	user_parin, &
	510	user_check_parameters, &
	511	user_check_data_output_ts, &
	512	user_check_data_output_pr, &
	513	user_check_data_output, &
	514	user_init, &
	515	user_init_arrays, &
	516	user_header, &
	517	user_actions, &
	518	user_3d_data_averaging, &
	519	user_data_output_2d, &
	520	user_data_output_3d, &
	521	user_statistics, &
	522	user_rrd_global, &
	523	user_rrd_local, &
	524	user_wrd_global, &
	525	user_wrd_local, &
	526	user_last_actions
[3684]	527
[3766]	528	IMPLICIT NONE
[3637]	529
[3766]	530	PRIVATE
[3637]	531
	532	!
[3766]	533	!-- Public functions
	534	PUBLIC &
	535	module_interface_parin, &
	536	module_interface_check_parameters, &
	537	module_interface_check_data_output_ts, &
	538	module_interface_check_data_output_pr, &
	539	module_interface_check_data_output, &
	540	module_interface_init_masks, &
	541	module_interface_define_netcdf_grid, &
	542	module_interface_init_arrays, &
	543	module_interface_init, &
	544	module_interface_init_checks, &
	545	module_interface_header, &
	546	module_interface_actions, &
[3931]	547	module_interface_non_advective_processes, &
[3887]	548	module_interface_exchange_horiz, &
[3837]	549	module_interface_prognostic_equations, &
[4268]	550	module_interface_boundary_conditions, &
[3766]	551	module_interface_swap_timelevel, &
	552	module_interface_3d_data_averaging, &
	553	module_interface_data_output_2d, &
	554	module_interface_data_output_3d, &
	555	module_interface_statistics, &
	556	module_interface_rrd_global, &
	557	module_interface_wrd_global, &
	558	module_interface_rrd_local, &
	559	module_interface_wrd_local, &
	560	module_interface_last_actions
[3637]	561
	562
[3766]	563	INTERFACE module_interface_parin
	564	MODULE PROCEDURE module_interface_parin
	565	END INTERFACE module_interface_parin
[3637]	566
[3766]	567	INTERFACE module_interface_check_parameters
	568	MODULE PROCEDURE module_interface_check_parameters
	569	END INTERFACE module_interface_check_parameters
[3637]	570
[3766]	571	INTERFACE module_interface_check_data_output_ts
	572	MODULE PROCEDURE module_interface_check_data_output_ts
	573	END INTERFACE module_interface_check_data_output_ts
[3700]	574
[3766]	575	INTERFACE module_interface_check_data_output_pr
	576	MODULE PROCEDURE module_interface_check_data_output_pr
	577	END INTERFACE module_interface_check_data_output_pr
[3637]	578
[3766]	579	INTERFACE module_interface_check_data_output
	580	MODULE PROCEDURE module_interface_check_data_output
	581	END INTERFACE module_interface_check_data_output
[3637]	582
[3766]	583	INTERFACE module_interface_init_masks
	584	MODULE PROCEDURE module_interface_init_masks
	585	END INTERFACE module_interface_init_masks
[3687]	586
[3766]	587	INTERFACE module_interface_define_netcdf_grid
	588	MODULE PROCEDURE module_interface_define_netcdf_grid
	589	END INTERFACE module_interface_define_netcdf_grid
[3637]	590
[3766]	591	INTERFACE module_interface_init_arrays
	592	MODULE PROCEDURE module_interface_init_arrays
	593	END INTERFACE module_interface_init_arrays
[3637]	594
[3766]	595	INTERFACE module_interface_init
	596	MODULE PROCEDURE module_interface_init
	597	END INTERFACE module_interface_init
[3637]	598
[3766]	599	INTERFACE module_interface_init_checks
	600	MODULE PROCEDURE module_interface_init_checks
	601	END INTERFACE module_interface_init_checks
[3711]	602
[3766]	603	INTERFACE module_interface_header
	604	MODULE PROCEDURE module_interface_header
	605	END INTERFACE module_interface_header
[3637]	606
[3766]	607	INTERFACE module_interface_actions
	608	MODULE PROCEDURE module_interface_actions
	609	MODULE PROCEDURE module_interface_actions_ij
	610	END INTERFACE module_interface_actions
[3637]	611
[3931]	612	INTERFACE module_interface_non_advective_processes
	613	MODULE PROCEDURE module_interface_non_advective_processes
	614	MODULE PROCEDURE module_interface_non_advective_processes_ij
	615	END INTERFACE module_interface_non_advective_processes
[4047]	616
[3887]	617	INTERFACE module_interface_exchange_horiz
	618	MODULE PROCEDURE module_interface_exchange_horiz
	619	END INTERFACE module_interface_exchange_horiz
[4047]	620
[3837]	621	INTERFACE module_interface_prognostic_equations
	622	MODULE PROCEDURE module_interface_prognostic_equations
	623	MODULE PROCEDURE module_interface_prognostic_equations_ij
	624	END INTERFACE module_interface_prognostic_equations
	625
[3766]	626	INTERFACE module_interface_swap_timelevel
	627	MODULE PROCEDURE module_interface_swap_timelevel
	628	END INTERFACE module_interface_swap_timelevel
[3637]	629
[4268]	630	INTERFACE module_interface_boundary_conditions
	631	MODULE PROCEDURE module_interface_boundary_conditions
	632	END INTERFACE module_interface_boundary_conditions
	633
[3766]	634	INTERFACE module_interface_3d_data_averaging
	635	MODULE PROCEDURE module_interface_3d_data_averaging
	636	END INTERFACE module_interface_3d_data_averaging
[3637]	637
[3766]	638	INTERFACE module_interface_data_output_2d
	639	MODULE PROCEDURE module_interface_data_output_2d
	640	END INTERFACE module_interface_data_output_2d
[3637]	641
[3766]	642	INTERFACE module_interface_data_output_3d
	643	MODULE PROCEDURE module_interface_data_output_3d
	644	END INTERFACE module_interface_data_output_3d
[3637]	645
[3766]	646	INTERFACE module_interface_statistics
	647	MODULE PROCEDURE module_interface_statistics
	648	END INTERFACE module_interface_statistics
[3637]	649
[3766]	650	INTERFACE module_interface_rrd_global
	651	MODULE PROCEDURE module_interface_rrd_global
	652	END INTERFACE module_interface_rrd_global
[3637]	653
[3766]	654	INTERFACE module_interface_wrd_global
	655	MODULE PROCEDURE module_interface_wrd_global
	656	END INTERFACE module_interface_wrd_global
[3637]	657
[3766]	658	INTERFACE module_interface_rrd_local
	659	MODULE PROCEDURE module_interface_rrd_local
	660	END INTERFACE module_interface_rrd_local
[3637]	661
[3766]	662	INTERFACE module_interface_wrd_local
	663	MODULE PROCEDURE module_interface_wrd_local
	664	END INTERFACE module_interface_wrd_local
[3637]	665
[3766]	666	INTERFACE module_interface_last_actions
	667	MODULE PROCEDURE module_interface_last_actions
	668	END INTERFACE module_interface_last_actions
[3637]	669
[3687]	670
[3766]	671	CONTAINS
[3637]	672
	673
	674	!------------------------------------------------------------------------------!
	675	! Description:
	676	! ------------
	677	!> Read module-specific parameter namelists
	678	!------------------------------------------------------------------------------!
[3766]	679	SUBROUTINE module_interface_parin
[3637]	680
	681
[3987]	682	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
	683
[4047]	684	CALL dynamics_parin
	685
[3766]	686	CALL bio_parin
	687	CALL bcm_parin
	688	CALL chem_parin
	689	CALL flight_parin ! ToDo: rename module to match filename
	690	CALL gust_parin
	691	CALL im_parin
[4047]	692	CALL lpm_parin
[3766]	693	CALL lsm_parin
	694	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
	695	CALL mas_parin
	696	CALL nesting_offl_parin
	697	CALL ocean_parin
	698	CALL pcm_parin
	699	CALL radiation_parin
	700	CALL salsa_parin
	701	CALL spectra_parin
	702	CALL surface_data_output_parin
	703	CALL stg_parin
	704	CALL usm_parin
	705	CALL vm_parin
	706	CALL wtm_parin
[3637]	707
[4047]	708	CALL user_parin
	709
[3987]	710	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
[3637]	711
[3987]	712
[3766]	713	END SUBROUTINE module_interface_parin
[3637]	714
	715
	716	!------------------------------------------------------------------------------!
	717	! Description:
	718	! ------------
	719	!> Perform module-specific initialization checks
	720	!------------------------------------------------------------------------------!
[3766]	721	SUBROUTINE module_interface_check_parameters
[3637]	722
	723
[3987]	724	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
	725
[4047]	726	CALL dynamics_check_parameters
[4048]	727	CALL tcm_check_parameters
[4047]	728
[3766]	729	IF ( bulk_cloud_model ) CALL bcm_check_parameters
	730	IF ( air_chemistry ) CALL chem_check_parameters
	731	IF ( gust_module_enabled ) CALL gust_check_parameters
	732	IF ( indoor_model ) CALL im_check_parameters
[4047]	733	IF ( particle_advection ) CALL lpm_check_parameters
[3766]	734	IF ( land_surface ) CALL lsm_check_parameters
	735	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
	736	IF ( nesting_offline ) CALL nesting_offl_check_parameters
	737	IF ( ocean_mode ) CALL ocean_check_parameters
	738	IF ( plant_canopy ) CALL pcm_check_parameters
	739	IF ( radiation ) CALL radiation_check_parameters
	740	IF ( salsa ) CALL salsa_check_parameters
	741	IF ( calculate_spectra ) CALL spectra_check_parameters
	742	IF ( surface_output ) CALL surface_data_output_check_parameters
	743	IF ( syn_turb_gen ) CALL stg_check_parameters
	744	IF ( urban_surface ) CALL usm_check_parameters
	745	IF ( virtual_measurement ) CALL vm_check_parameters
	746	IF ( wind_turbine ) CALL wtm_check_parameters
[4047]	747
[3766]	748	IF ( user_module_enabled ) CALL user_check_parameters
[3637]	749
[3987]	750	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
[3637]	751
[3987]	752
[3766]	753	END SUBROUTINE module_interface_check_parameters
[3637]	754
	755
	756	!------------------------------------------------------------------------------!
	757	! Description:
	758	! ------------
[3700]	759	!> Check module-specific data output of timeseries
	760	!------------------------------------------------------------------------------!
[3766]	761	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
[3700]	762
	763
[3766]	764	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
	765	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
	766	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
	767	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
[3700]	768
	769
[3987]	770	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
	771
[4047]	772	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
	773
[3766]	774	IF ( radiation ) THEN
[3769]	775	CALL radiation_check_data_output_ts( dots_max, dots_num )
[3766]	776	ENDIF
[3700]	777
[3766]	778	IF ( user_module_enabled ) THEN
	779	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
	780	ENDIF
[3700]	781
[3987]	782	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
[3700]	783
[3987]	784
[3766]	785	END SUBROUTINE module_interface_check_data_output_ts
[3700]	786
	787
	788	!------------------------------------------------------------------------------!
	789	! Description:
	790	! ------------
[3637]	791	!> Check module-specific data output of profiles
	792	!------------------------------------------------------------------------------!
[3766]	793	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
	794	dopr_unit )
[3637]	795
	796
[3766]	797	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	798	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
	799	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
	800	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
[3637]	801
[3987]	802
	803	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
	804
[4047]	805	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
	806
[3766]	807	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
	808	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
	809	ENDIF
[3637]	810
[3766]	811	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
	812	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
	813	ENDIF
[3637]	814
[3766]	815	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
	816	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
	817	ENDIF
[3637]	818
[3766]	819	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	820	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
	821	ENDIF
[3637]	822
[3766]	823	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	824	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
	825	ENDIF
[3637]	826
[3766]	827	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
	828	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
	829	ENDIF
[3637]	830
[3766]	831	IF ( unit == 'illegal' .AND. radiation ) THEN
	832	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
	833	ENDIF
[3637]	834
[4131]	835	IF ( unit == 'illegal' .AND. salsa ) THEN
	836	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
	837	ENDIF
	838
[3766]	839	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	840	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
	841	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
	842	ENDIF
[3637]	843
[3987]	844	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
[3637]	845
[3987]	846
[3766]	847	END SUBROUTINE module_interface_check_data_output_pr
[3637]	848
	849	!------------------------------------------------------------------------------!
	850	! Description:
	851	! ------------
	852	!> Check module-specific 2D and 3D data output
	853	!------------------------------------------------------------------------------!
[3766]	854	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
[3637]	855
	856
[3766]	857	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	858	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
[3637]	859
[3766]	860	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
	861	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
	862	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
	863	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
[3637]	864
[3987]	865
	866	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
	867
[4047]	868	CALL dynamics_check_data_output( variable, unit )
	869
[4048]	870	CALL tcm_check_data_output( variable, unit )
	871
[3766]	872	IF ( unit == 'illegal' .AND. biometeorology ) THEN
	873	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
	874	ENDIF
[3637]	875
[3766]	876	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
	877	CALL bcm_check_data_output( variable, unit )
	878	ENDIF
[3637]	879
[3766]	880	IF ( unit == 'illegal' .AND. air_chemistry &
	881	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
	882	CALL chem_check_data_output( variable, unit, i, ilen, k )
	883	ENDIF
[4047]	884
[4039]	885	IF ( unit == 'illegal' ) THEN
[4331]	886	CALL doq_check_data_output( variable, unit, i, ilen, k )
[4039]	887	ENDIF
[3637]	888
[3766]	889	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
	890	CALL gust_check_data_output( variable, unit )
	891	ENDIF
[3637]	892
[3766]	893	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	894	CALL lsm_check_data_output( variable, unit, i, ilen, k )
	895	ENDIF
[3637]	896
[3766]	897	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
	898	CALL ocean_check_data_output( variable, unit )
	899	ENDIF
[3637]	900
[3766]	901	IF ( unit == 'illegal' .AND. plant_canopy &
	902	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
	903	CALL pcm_check_data_output( variable, unit )
	904	ENDIF
[3637]	905
[3766]	906	IF ( unit == 'illegal' .AND. radiation ) THEN
	907	CALL radiation_check_data_output( variable, unit, i, ilen, k )
	908	ENDIF
[3637]	909
[3766]	910	IF ( unit == 'illegal' .AND. salsa ) THEN
[3637]	911	CALL salsa_check_data_output( variable, unit )
[3766]	912	ENDIF
[3637]	913
[3766]	914	IF ( unit == 'illegal' .AND. indoor_model ) THEN
[3744]	915	CALL im_check_data_output( variable, unit )
[3766]	916	ENDIF
[4047]	917
[3766]	918	IF ( unit == 'illegal' .AND. urban_surface &
[3637]	919	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
	920	CALL usm_check_data_output( variable, unit )
[3766]	921	ENDIF
[3637]	922
[3766]	923	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	924	unit = ''
	925	CALL user_check_data_output( variable, unit )
	926	ENDIF
[3637]	927
[3987]	928	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
[3637]	929
[3987]	930
[3766]	931	END SUBROUTINE module_interface_check_data_output
[3637]	932
	933
	934	!------------------------------------------------------------------------------!
	935	!
	936	! Description:
	937	! ------------
[3687]	938	!> Interface for init_masks. ToDo: get rid of these redundant calls!
	939	!------------------------------------------------------------------------------!
[3766]	940	SUBROUTINE module_interface_init_masks( variable, unit )
[3687]	941
	942
[3766]	943	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	944	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
[3687]	945
[3987]	946
	947	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
	948
[4047]	949	CALL dynamics_init_masks( variable, unit )
	950
[3766]	951	IF ( unit == 'illegal' .AND. air_chemistry &
	952	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
	953	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
	954	ENDIF
[4132]	955
	956	IF ( unit == 'illegal' ) THEN
	957	CALL doq_check_data_output( variable, unit )
	958	ENDIF
[3687]	959
[3766]	960	IF ( unit == 'illegal' .AND. radiation ) THEN
	961	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
	962	ENDIF
[3687]	963
[3766]	964	IF ( unit == 'illegal' .AND. salsa ) THEN
	965	CALL salsa_check_data_output( variable, unit )
	966	ENDIF
[3687]	967
[3766]	968	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	969	unit = ''
	970	CALL user_check_data_output( variable, unit )
	971	ENDIF
[3687]	972
[3987]	973	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
[3687]	974
[3987]	975
[3766]	976	END SUBROUTINE module_interface_init_masks
[3687]	977
	978
	979	!------------------------------------------------------------------------------!
	980	!
	981	! Description:
	982	! ------------
[3637]	983	!> Define appropriate grid for module-specific netcdf output variables.
	984	!------------------------------------------------------------------------------!
[3766]	985	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
	986	grid_x, grid_y, grid_z )
[3637]	987
	988
[3766]	989	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
	990	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
	991	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
	992	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
	993	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
[3987]	994
	995
	996	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
[3649]	997	!
[3766]	998	!-- As long as no action is done in this subroutine, initialize strings with
	999	!-- intent(out) attribute, in order to avoid compiler warnings.
	1000	found = .FALSE.
	1001	grid_x = 'none'
	1002	grid_y = 'none'
	1003	grid_z = 'none'
	1004	!
	1005	!-- Use var to avoid compiler warning about unused variable
	1006	IF ( var == ' ' ) RETURN
[3637]	1007
[3987]	1008	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
	1009
	1010
[3766]	1011	END SUBROUTINE module_interface_define_netcdf_grid
[3637]	1012
	1013
	1014	!------------------------------------------------------------------------------!
	1015	! Description:
	1016	! ------------
	1017	!> Allocate module-specific arrays and pointers
	1018	!------------------------------------------------------------------------------!
[3766]	1019	SUBROUTINE module_interface_init_arrays
[3637]	1020
	1021
[3987]	1022	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
[3885]	1023
[4047]	1024	CALL dynamics_init_arrays
[4048]	1025	CALL tcm_init_arrays
[4047]	1026
[3766]	1027	IF ( bulk_cloud_model ) CALL bcm_init_arrays
	1028	IF ( air_chemistry ) CALL chem_init_arrays
	1029	IF ( gust_module_enabled ) CALL gust_init_arrays
[4047]	1030	IF ( particle_advection ) CALL lpm_init_arrays
[3766]	1031	IF ( land_surface ) CALL lsm_init_arrays
	1032	IF ( ocean_mode ) CALL ocean_init_arrays
	1033	IF ( salsa ) CALL salsa_init_arrays
	1034	IF ( urban_surface ) CALL usm_init_arrays
	1035	IF ( surface_output ) CALL surface_data_output_init_arrays
	1036	IF ( wind_turbine ) CALL wtm_init_arrays
[4047]	1037
[3766]	1038	IF ( user_module_enabled ) CALL user_init_arrays
[3685]	1039
[3987]	1040	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
[3685]	1041
[3885]	1042
[3766]	1043	END SUBROUTINE module_interface_init_arrays
[3637]	1044
	1045
	1046	!------------------------------------------------------------------------------!
	1047	! Description:
	1048	! ------------
	1049	!> Perform module-specific initialization
	1050	!------------------------------------------------------------------------------!
[3766]	1051	SUBROUTINE module_interface_init
[3637]	1052
	1053
[3987]	1054	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
[3885]	1055
[4047]	1056	CALL dynamics_init
[4048]	1057	CALL tcm_init
[4047]	1058
[3766]	1059	IF ( biometeorology ) CALL bio_init
	1060	IF ( bulk_cloud_model ) CALL bcm_init
	1061	IF ( air_chemistry ) CALL chem_init
	1062	IF ( virtual_flight ) CALL flight_init
	1063	IF ( gust_module_enabled ) CALL gust_init
	1064	IF ( indoor_model ) CALL im_init
[4047]	1065	IF ( particle_advection ) CALL lpm_init
[3766]	1066	IF ( large_scale_forcing ) CALL lsf_init
	1067	IF ( land_surface ) CALL lsm_init
	1068	IF ( nudging ) CALL nudge_init
	1069	IF ( ocean_mode ) CALL ocean_init
	1070	IF ( plant_canopy ) CALL pcm_init
	1071	IF ( salsa ) CALL salsa_init
	1072	IF ( urban_surface ) CALL usm_init
	1073	IF ( virtual_measurement ) CALL vm_init
	1074	IF ( wind_turbine ) CALL wtm_init
	1075	IF ( radiation ) CALL radiation_init
[4047]	1076
[4157]	1077	CALL doq_init
	1078
[3766]	1079	IF ( user_module_enabled ) CALL user_init
[3685]	1080
[3987]	1081	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
[3685]	1082
[3885]	1083
[3766]	1084	END SUBROUTINE module_interface_init
[3637]	1085
	1086
	1087	!------------------------------------------------------------------------------!
	1088	! Description:
	1089	! ------------
[3711]	1090	!> Perform module-specific post-initialization checks
	1091	!------------------------------------------------------------------------------!
[3766]	1092	SUBROUTINE module_interface_init_checks
[3711]	1093
	1094
[3987]	1095	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
	1096
[4047]	1097	CALL dynamics_init_checks
	1098
[3766]	1099	IF ( biometeorology ) CALL bio_init_checks
[3711]	1100
[3987]	1101	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
[3711]	1102
[3987]	1103
[3766]	1104	END SUBROUTINE module_interface_init_checks
[3711]	1105
	1106
	1107	!------------------------------------------------------------------------------!
	1108	! Description:
	1109	! ------------
[3637]	1110	!> Gather module-specific header output
	1111	!------------------------------------------------------------------------------!
[3766]	1112	SUBROUTINE module_interface_header( io )
[3637]	1113
	1114
[3766]	1115	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
[3637]	1116
	1117
[3987]	1118	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
	1119
[4047]	1120	CALL dynamics_header( io )
	1121
[3766]	1122	IF ( biometeorology ) CALL bio_header ( io )
	1123	IF ( bulk_cloud_model ) CALL bcm_header( io )
	1124	IF ( air_chemistry ) CALL chem_header ( io )
	1125	IF ( virtual_flight ) CALL flight_header( io )
	1126	IF ( gust_module_enabled ) CALL gust_header( io )
[4047]	1127	IF ( particle_advection ) CALL lpm_header( io )
[3766]	1128	IF ( land_surface ) CALL lsm_header( io )
	1129	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
	1130	IF ( nesting_offline ) CALL nesting_offl_header( io )
	1131	IF ( ocean_mode ) CALL ocean_header( io )
	1132	IF ( plant_canopy ) CALL pcm_header( io )
	1133	IF ( radiation ) CALL radiation_header( io )
	1134	IF ( salsa ) CALL salsa_header( io )
	1135	IF ( calculate_spectra ) CALL spectra_header( io )
	1136	IF ( syn_turb_gen ) CALL stg_header( io )
[4047]	1137
[3766]	1138	IF ( user_module_enabled ) CALL user_header( io )
[3637]	1139
[3987]	1140	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
[3637]	1141
[3987]	1142
[3766]	1143	END SUBROUTINE module_interface_header
[3637]	1144
	1145
	1146	!------------------------------------------------------------------------------!
	1147	! Description:
	1148	! ------------
[3874]	1149	!> Perform module-specific actions while in time-integration (vector-optimized)
[3637]	1150	!------------------------------------------------------------------------------!
[3766]	1151	SUBROUTINE module_interface_actions( location )
[3637]	1152
	1153
[3766]	1154	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
[3637]	1155
[4047]	1156	CALL dynamics_actions( location )
[4048]	1157	CALL tcm_actions( location )
[3637]	1158
[3870]	1159	IF ( bulk_cloud_model ) CALL bcm_actions( location )
[3877]	1160	IF ( air_chemistry ) CALL chem_actions( location )
[3766]	1161	IF ( gust_module_enabled ) CALL gust_actions( location )
[4047]	1162	IF ( particle_advection ) CALL lpm_actions( location )
[3873]	1163	IF ( ocean_mode ) CALL ocean_actions( location )
[3871]	1164	IF ( salsa ) CALL salsa_actions( location )
[3875]	1165	IF ( wind_turbine ) CALL wtm_actions( location )
[4047]	1166
[3766]	1167	IF ( user_module_enabled ) CALL user_actions( location )
[4173]	1168	IF ( vdi_checks ) CALL vdi_actions( location )
[3684]	1169
	1170
[3766]	1171	END SUBROUTINE module_interface_actions
[3637]	1172
	1173
	1174	!------------------------------------------------------------------------------!
	1175	! Description:
	1176	! ------------
[3874]	1177	!> Perform module-specific actions while in time-integration (cache-optimized)
[3637]	1178	!------------------------------------------------------------------------------!
[3766]	1179	SUBROUTINE module_interface_actions_ij( i, j, location )
[3637]	1180
	1181
[3766]	1182	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1183	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1184	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
[3637]	1185
[4047]	1186	CALL dynamics_actions( i, j, location )
[4048]	1187	CALL tcm_actions( i, j, location )
[3637]	1188
[3870]	1189	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
[3877]	1190	IF ( air_chemistry ) CALL chem_actions( i, j, location )
[3766]	1191	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
[3873]	1192	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
[3871]	1193	IF ( salsa ) CALL salsa_actions( i, j, location )
[3875]	1194	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
[4047]	1195
[3766]	1196	IF ( user_module_enabled ) CALL user_actions( i, j, location )
[3684]	1197
	1198
[3766]	1199	END SUBROUTINE module_interface_actions_ij
[3637]	1200
	1201
	1202	!------------------------------------------------------------------------------!
	1203	! Description:
	1204	! ------------
[3987]	1205	!> Compute module-specific non_advective_processes (vector-optimized)
[3874]	1206	!------------------------------------------------------------------------------!
[4047]	1207	SUBROUTINE module_interface_non_advective_processes
[3874]	1208
	1209
[4047]	1210	CALL dynamics_non_advective_processes
[3874]	1211
[4047]	1212	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
	1213	IF ( air_chemistry ) CALL chem_non_advective_processes
	1214	IF ( salsa ) CALL salsa_non_advective_processes
[3874]	1215
[4047]	1216
[3931]	1217	END SUBROUTINE module_interface_non_advective_processes
[3874]	1218
	1219
	1220	!------------------------------------------------------------------------------!
	1221	! Description:
	1222	! ------------
[3931]	1223	!> Compute module-specific non_advective_processes (cache-optimized)
[3837]	1224	!------------------------------------------------------------------------------!
[3931]	1225	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
[3874]	1226
	1227
	1228	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1229	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1230
[4047]	1231	CALL dynamics_non_advective_processes( i, j )
[3874]	1232
[3956]	1233	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
[3930]	1234	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
[3956]	1235	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
[3874]	1236
	1237
[3931]	1238	END SUBROUTINE module_interface_non_advective_processes_ij
[4047]	1239
[3887]	1240	!------------------------------------------------------------------------------!
	1241	! Description:
	1242	! ------------
[4047]	1243	!> Exchange horiz for module-specific quantities
[3887]	1244	!------------------------------------------------------------------------------!
[4047]	1245	SUBROUTINE module_interface_exchange_horiz
[3874]	1246
	1247
[3987]	1248	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
	1249
[4047]	1250	CALL dynamics_exchange_horiz
[3887]	1251
[4047]	1252	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
	1253	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
	1254	IF ( salsa ) CALL salsa_exchange_horiz_bounds
	1255
[3987]	1256	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
	1257
	1258
[3887]	1259	END SUBROUTINE module_interface_exchange_horiz
	1260
	1261
[3874]	1262	!------------------------------------------------------------------------------!
	1263	! Description:
	1264	! ------------
	1265	!> Compute module-specific prognostic_equations (vector-optimized)
	1266	!------------------------------------------------------------------------------!
[4047]	1267	SUBROUTINE module_interface_prognostic_equations
[3837]	1268
	1269
[4047]	1270	CALL dynamics_prognostic_equations
[4048]	1271	CALL tcm_prognostic_equations
[3837]	1272
[4047]	1273	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
	1274	IF ( air_chemistry ) CALL chem_prognostic_equations
	1275	IF ( gust_module_enabled ) CALL gust_prognostic_equations
	1276	IF ( ocean_mode ) CALL ocean_prognostic_equations
	1277	IF ( salsa ) CALL salsa_prognostic_equations
[3837]	1278
[4047]	1279
[3837]	1280	END SUBROUTINE module_interface_prognostic_equations
	1281
	1282
	1283	!------------------------------------------------------------------------------!
	1284	! Description:
	1285	! ------------
[3874]	1286	!> Compute module-specific prognostic_equations (cache-optimized)
[3837]	1287	!------------------------------------------------------------------------------!
	1288	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
	1289
	1290
	1291	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1292	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1293	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
	1294	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
	1295
[4047]	1296	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
[4048]	1297	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1298
[3870]	1299	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
[3880]	1300	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1301	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
[3840]	1302	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
[3864]	1303	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1304
	1305
	1306	END SUBROUTINE module_interface_prognostic_equations_ij
	1307
[4268]	1308	!------------------------------------------------------------------------------!
	1309	! Description:
	1310	! ------------
	1311	!> Compute module-specific boundary conditions
	1312	!------------------------------------------------------------------------------!
	1313	SUBROUTINE module_interface_boundary_conditions
[3837]	1314
[4268]	1315
	1316	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
	1317
[4281]	1318	CALL dynamics_boundary_conditions
	1319	CALL tcm_boundary_conds
	1320
[4268]	1321	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
	1322	IF ( air_chemistry ) CALL chem_boundary_conditions
[4272]	1323	IF ( ocean_mode ) CALL ocean_boundary_conditions
[4268]	1324	IF ( salsa ) CALL salsa_boundary_conditions
	1325
	1326	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
	1327
	1328
	1329	END SUBROUTINE module_interface_boundary_conditions
	1330
[3837]	1331	!------------------------------------------------------------------------------!
	1332	! Description:
	1333	! ------------
[3637]	1334	!> Swap the timelevel pointers for module-specific arrays
	1335	!------------------------------------------------------------------------------!
[3766]	1336	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
[3637]	1337
	1338
[3766]	1339	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
[3637]	1340
[3987]	1341
	1342	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
	1343
[4047]	1344	CALL dynamics_swap_timelevel( swap_mode )
	1345	CALL tcm_swap_timelevel( swap_mode )
	1346
[3766]	1347	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
	1348	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
	1349	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
	1350	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
	1351	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
	1352	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
	1353	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
[3637]	1354
[3987]	1355	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
[3637]	1356
[3987]	1357
[3766]	1358	END SUBROUTINE module_interface_swap_timelevel
[3637]	1359
	1360
	1361	!------------------------------------------------------------------------------!
	1362	!
	1363	! Description:
	1364	! ------------
	1365	!> Perform module-specific averaging of 3D data
	1366	!------------------------------------------------------------------------------!
[3766]	1367	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
[3637]	1368
	1369
[3766]	1370	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
	1371	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
[3637]	1372
[3987]	1373
	1374	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
	1375
[4047]	1376	CALL dynamics_3d_data_averaging( mode, variable )
[4048]	1377	CALL tcm_3d_data_averaging( mode, variable )
[4047]	1378
[3766]	1379	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
	1380	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
	1381	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
[4047]	1382	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
[3766]	1383	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
	1384	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
	1385	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
[4127]	1386	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
[3766]	1387	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
	1388	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
	1389	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
[4047]	1390
[3766]	1391	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
[3637]	1392
[3987]	1393	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
[3637]	1394
[3987]	1395
[3766]	1396	END SUBROUTINE module_interface_3d_data_averaging
[3637]	1397
	1398	!------------------------------------------------------------------------------!
	1399	!
	1400	! Description:
	1401	! ------------
	1402	!> Define module-specific 2D output variables
	1403	!------------------------------------------------------------------------------!
[3766]	1404	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
	1405	local_pf, two_d, nzb_do, nzt_do, &
	1406	fill_value )
[3637]	1407
[3766]	1408	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
	1409	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	1410	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
	1411	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
	1412	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
	1413	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
	1414	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
	1415	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
	1416	REAL(wp), INTENT(IN) :: fill_value !< to be removed
[3637]	1417
[4004]	1418	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
[3637]	1419
	1420
[3987]	1421	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
	1422
[4047]	1423	CALL dynamics_data_output_2d( &
	1424	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1425	)
	1426
[4048]	1427	IF ( .NOT. found ) THEN
	1428	CALL tcm_data_output_2d( &
	1429	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
	1430	)
	1431	ENDIF
	1432
[3766]	1433	IF ( .NOT. found .AND. biometeorology ) THEN
	1434	CALL bio_data_output_2d( &
	1435	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
	1436	)
	1437	ENDIF
[3637]	1438
[3766]	1439	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
	1440	CALL bcm_data_output_2d( &
	1441	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1442	)
	1443	ENDIF
[3637]	1444
[3766]	1445	IF ( .NOT. found .AND. air_chemistry ) THEN
	1446	CALL chem_data_output_2d( &
	1447	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1448	)
	1449	ENDIF
[4047]	1450
[4039]	1451	IF ( .NOT. found ) THEN
	1452	CALL doq_output_2d( &
	1453	av, variable, found, grid, mode, local_pf, two_d, &
	1454	nzb_do, nzt_do, fill_value )
	1455	ENDIF
[3637]	1456
[3766]	1457	IF ( .NOT. found .AND. gust_module_enabled ) THEN
	1458	CALL gust_data_output_2d( &
	1459	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1460	)
	1461	ENDIF
[3637]	1462
[3766]	1463	IF ( .NOT. found .AND. land_surface ) THEN
	1464	CALL lsm_data_output_2d( &
	1465	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1466	)
	1467	ENDIF
[3637]	1468
[3766]	1469	IF ( .NOT. found .AND. ocean_mode ) THEN
	1470	CALL ocean_data_output_2d( &
	1471	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
	1472	)
	1473	ENDIF
[3637]	1474
[4008]	1475	IF ( .NOT. found .AND. radiation ) THEN
	1476	CALL radiation_data_output_2d( &
[3766]	1477	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1478	)
	1479	ENDIF
[3637]	1480
[4008]	1481	IF ( .NOT. found .AND. salsa ) THEN
	1482	CALL salsa_data_output_2d( &
[3766]	1483	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1484	)
	1485	ENDIF
[3637]	1486
[3766]	1487	IF ( .NOT. found .AND. user_module_enabled ) THEN
	1488	CALL user_data_output_2d( &
	1489	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
	1490	)
	1491	ENDIF
[3637]	1492
[3987]	1493	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
	1494
	1495
[3766]	1496	END SUBROUTINE module_interface_data_output_2d
[3637]	1497
	1498
	1499	!------------------------------------------------------------------------------!
	1500	!
	1501	! Description:
	1502	! ------------
	1503	!> Define module-specific 3D output variables
	1504	!------------------------------------------------------------------------------!
[3766]	1505	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
	1506	fill_value, resorted, nzb_do, nzt_do )
[3637]	1507
	1508
[3766]	1509	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
	1510	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	1511	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
	1512	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
	1513	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
	1514	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
	1515	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
[3637]	1516
[4004]	1517	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
[3637]	1518
	1519
[3987]	1520	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
	1521
[4047]	1522	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1523	resorted = .FALSE.
	1524
[4048]	1525	IF ( .NOT. found ) THEN
	1526	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1527	resorted = .TRUE.
	1528	ENDIF
	1529
[3766]	1530	IF ( .NOT. found .AND. biometeorology ) THEN
	1531	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1532	resorted = .FALSE.
	1533	ENDIF
[3637]	1534
[3766]	1535	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
	1536	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1537	resorted = .TRUE.
	1538	ENDIF
[3637]	1539
[3766]	1540	IF ( .NOT. found .AND. air_chemistry ) THEN
	1541	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1542	resorted = .TRUE.
	1543	ENDIF
[4047]	1544
[4039]	1545	IF ( .NOT. found ) THEN
	1546	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1547	resorted = .TRUE.
	1548	ENDIF
[4047]	1549
[3766]	1550	IF ( .NOT. found .AND. gust_module_enabled ) THEN
	1551	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1552	resorted = .TRUE.
	1553	ENDIF
[4047]	1554
[3766]	1555	IF ( .NOT. found .AND. indoor_model ) THEN
	1556	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1557	resorted = .TRUE.
	1558	ENDIF
[3637]	1559
[3766]	1560	IF ( .NOT. found .AND. ocean_mode ) THEN
	1561	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1562	resorted = .TRUE.
	1563	ENDIF
[3637]	1564
[3766]	1565	IF ( .NOT. found .AND. plant_canopy ) THEN
	1566	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1567	resorted = .TRUE.
	1568	ENDIF
[3637]	1569
[4008]	1570	IF ( .NOT. found .AND. radiation ) THEN
	1571	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
[3766]	1572	resorted = .TRUE.
	1573	ENDIF
[3637]	1574
[4008]	1575	IF ( .NOT. found .AND. salsa ) THEN
	1576	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
[3766]	1577	resorted = .TRUE.
	1578	ENDIF
[3637]	1579
[3766]	1580	IF ( .NOT. found .AND. user_module_enabled ) THEN
	1581	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1582	resorted = .TRUE.
	1583	ENDIF
[3637]	1584
[3987]	1585	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
[3637]	1586
[3987]	1587
[3766]	1588	END SUBROUTINE module_interface_data_output_3d
[3637]	1589
	1590
	1591	!------------------------------------------------------------------------------!
	1592	! Description:
	1593	! ------------
	1594	!> Compute module-specific profile and timeseries data
	1595	!------------------------------------------------------------------------------!
[3766]	1596	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
[3637]	1597
	1598
[3766]	1599	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
	1600	INTEGER(iwp), INTENT(IN) :: sr !<
	1601	INTEGER(iwp), INTENT(IN) :: tn !<
	1602	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
[3637]	1603
[3987]	1604
	1605	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
	1606
[4047]	1607	CALL dynamics_statistics( mode, sr, tn )
	1608
[3766]	1609	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
	1610	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
[4131]	1611	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
[4047]	1612
[3766]	1613	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
[3637]	1614
[3987]	1615	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
[3637]	1616
[3987]	1617
[3766]	1618	END SUBROUTINE module_interface_statistics
[3637]	1619
	1620
	1621	!------------------------------------------------------------------------------!
	1622	! Description:
	1623	! ------------
	1624	!> Read module-specific restart data globaly shared by all MPI ranks
	1625	!------------------------------------------------------------------------------!
[3766]	1626	SUBROUTINE module_interface_rrd_global( found )
[3637]	1627
	1628
[3806]	1629	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
[3637]	1630
[3987]	1631
	1632	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
	1633
[4047]	1634	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
	1635
[3766]	1636	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
	1637	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
	1638	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
	1639	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
[4047]	1640	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
[3766]	1641	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
	1642	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
	1643	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
	1644	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
[4047]	1645
[3766]	1646	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
[3637]	1647
[3987]	1648	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
[3637]	1649
[3987]	1650
[3766]	1651	END SUBROUTINE module_interface_rrd_global
[3637]	1652
	1653
	1654	!------------------------------------------------------------------------------!
	1655	! Description:
	1656	! ------------
	1657	!> Write module-specific restart data globaly shared by all MPI ranks
	1658	!------------------------------------------------------------------------------!
[3766]	1659	SUBROUTINE module_interface_wrd_global
[3637]	1660
	1661
[3987]	1662	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
	1663
[4047]	1664	CALL dynamics_wrd_global
	1665
[3766]	1666	IF ( biometeorology ) CALL bio_wrd_global
	1667	IF ( bulk_cloud_model ) CALL bcm_wrd_global
	1668	IF ( virtual_flight ) CALL flight_wrd_global
	1669	IF ( gust_module_enabled ) CALL gust_wrd_global
	1670	IF ( ocean_mode ) CALL ocean_wrd_global
	1671	IF ( syn_turb_gen ) CALL stg_wrd_global
	1672	IF ( wind_turbine ) CALL wtm_wrd_global
	1673	IF ( surface_output ) CALL surface_data_output_wrd_global
[4047]	1674
[3766]	1675	IF ( user_module_enabled ) CALL user_wrd_global
[3637]	1676
[3987]	1677	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
[3637]	1678
[3987]	1679
[3766]	1680	END SUBROUTINE module_interface_wrd_global
[3637]	1681
	1682
	1683	!------------------------------------------------------------------------------!
	1684	! Description:
	1685	! ------------
	1686	!> Read module-specific restart data specific to local MPI ranks
	1687	!------------------------------------------------------------------------------!
[3767]	1688	SUBROUTINE module_interface_rrd_local( map_index, &
[3766]	1689	nxlf, nxlc, nxl_on_file, &
	1690	nxrf, nxrc, nxr_on_file, &
	1691	nynf, nync, nyn_on_file, &
	1692	nysf, nysc, nys_on_file, &
	1693	tmp_2d, tmp_3d, found )
[3637]	1694
	1695
[3806]	1696	INTEGER(iwp), INTENT(IN) :: map_index !<
	1697	INTEGER(iwp), INTENT(IN) :: nxlc !<
	1698	INTEGER(iwp), INTENT(IN) :: nxlf !<
	1699	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
	1700	INTEGER(iwp), INTENT(IN) :: nxrc !<
	1701	INTEGER(iwp), INTENT(IN) :: nxrf !<
	1702	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
	1703	INTEGER(iwp), INTENT(IN) :: nync !<
	1704	INTEGER(iwp), INTENT(IN) :: nynf !<
	1705	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
	1706	INTEGER(iwp), INTENT(IN) :: nysc !<
	1707	INTEGER(iwp), INTENT(IN) :: nysf !<
	1708	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
	1709	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
[3637]	1710
[4039]	1711	REAL(wp), &
	1712	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
	1713	INTENT(OUT) :: tmp_2d !<
	1714	REAL(wp), &
	1715	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
	1716	INTENT(OUT) :: tmp_3d !<
[3637]	1717
	1718
[3987]	1719	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
	1720
[4047]	1721	CALL dynamics_rrd_local( &
	1722	map_index, &
	1723	nxlf, nxlc, nxl_on_file, &
	1724	nxrf, nxrc, nxr_on_file, &
	1725	nynf, nync, nyn_on_file, &
	1726	nysf, nysc, nys_on_file, &
	1727	tmp_2d, tmp_3d, found &
	1728	) ! ToDo: change interface to pass variable
	1729
[4039]	1730	IF ( .NOT. found ) CALL bio_rrd_local( &
[3766]	1731	found &
	1732	)
[3650]	1733
[4039]	1734	IF ( .NOT. found ) CALL bcm_rrd_local( &
[3767]	1735	map_index, &
[3766]	1736	nxlf, nxlc, nxl_on_file, &
	1737	nxrf, nxrc, nxr_on_file, &
	1738	nynf, nync, nyn_on_file, &
	1739	nysf, nysc, nys_on_file, &
	1740	tmp_2d, tmp_3d, found &
	1741	) ! ToDo: change interface to pass variable
[3637]	1742
[4039]	1743	IF ( .NOT. found ) CALL chem_rrd_local( &
[3767]	1744	map_index, &
[3766]	1745	nxlf, nxlc, nxl_on_file, &
	1746	nxrf, nxrc, nxr_on_file, &
	1747	nynf, nync, nyn_on_file, &
	1748	nysf, nysc, nys_on_file, &
	1749	tmp_3d, found &
	1750	) ! ToDo: change interface to pass variable
[4047]	1751
[4039]	1752	! IF ( .NOT. found ) CALL doq_rrd_local( &
	1753	! map_index, &
	1754	! nxlf, nxlc, nxl_on_file, &
	1755	! nxrf, nxrc, nxr_on_file, &
	1756	! nynf, nync, nyn_on_file, &
	1757	! nysf, nysc, nys_on_file, &
	1758	! tmp_3d_non_standard, found &
	1759	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
[3637]	1760
[4039]	1761	IF ( .NOT. found ) CALL gust_rrd_local( &
[3767]	1762	map_index, &
[3766]	1763	nxlf, nxlc, nxl_on_file, &
	1764	nxrf, nxrc, nxr_on_file, &
	1765	nynf, nync, nyn_on_file, &
	1766	nysf, nysc, nys_on_file, &
	1767	tmp_2d, tmp_3d, found &
	1768	) ! ToDo: change interface to pass variable
[3637]	1769
[4039]	1770	IF ( .NOT. found ) CALL lpm_rrd_local( &
[4017]	1771	map_index, &
	1772	nxlf, nxlc, nxl_on_file, &
	1773	nxrf, nxrc, nxr_on_file, &
	1774	nynf, nync, nyn_on_file, &
	1775	nysf, nysc, nys_on_file, &
	1776	tmp_3d, found &
	1777	) ! ToDo: change interface to pass variable
	1778
[4039]	1779	IF ( .NOT. found ) CALL lsm_rrd_local( &
[3767]	1780	map_index, &
[3766]	1781	nxlf, nxlc, nxl_on_file, &
	1782	nxrf, nxrc, nxr_on_file, &
	1783	nynf, nync, nyn_on_file, &
	1784	nysf, nysc, nys_on_file, &
	1785	tmp_2d, found &
	1786	) ! ToDo: change interface to pass variable
[3637]	1787
[4360]	1788	IF ( .NOT. found ) CALL pcm_rrd_local( &
	1789	map_index, &
	1790	nxlf, nxlc, nxl_on_file, &
	1791	nxrf, nxrc, nxr_on_file, &
	1792	nynf, nync, nyn_on_file, &
	1793	nysf, nysc, nys_on_file, &
[4361]	1794	found &
[4360]	1795	)
	1796
[4039]	1797	IF ( .NOT. found ) CALL ocean_rrd_local( &
[3767]	1798	map_index, &
[3766]	1799	nxlf, nxlc, nxl_on_file, &
	1800	nxrf, nxrc, nxr_on_file, &
	1801	nynf, nync, nyn_on_file, &
	1802	nysf, nysc, nys_on_file, &
[3767]	1803	tmp_3d, found &
[3766]	1804	) ! ToDo: change interface to pass variable
[3637]	1805
[4039]	1806	IF ( .NOT. found ) CALL radiation_rrd_local( &
[3767]	1807	map_index, &
[3766]	1808	nxlf, nxlc, nxl_on_file, &
	1809	nxrf, nxrc, nxr_on_file, &
	1810	nynf, nync, nyn_on_file, &
	1811	nysf, nysc, nys_on_file, &
	1812	tmp_2d, tmp_3d, found &
	1813	) ! ToDo: change interface to pass variable
[3637]	1814
[4039]	1815	IF ( .NOT. found ) CALL salsa_rrd_local( &
[3767]	1816	map_index, &
[3766]	1817	nxlf, nxlc, nxl_on_file, &
	1818	nxrf, nxrc, nxr_on_file, &
	1819	nynf, nync, nyn_on_file, &
	1820	nysf, nysc, nys_on_file, &
	1821	tmp_3d, found &
	1822	) ! ToDo: change interface to pass variable
[3637]	1823
[4039]	1824	IF ( .NOT. found ) CALL usm_rrd_local( &
[3767]	1825	map_index, &
[3766]	1826	nxlf, nxlc, nxl_on_file, &
[3767]	1827	nxrf, nxr_on_file, &
	1828	nynf, nyn_on_file, &
[3766]	1829	nysf, nysc, nys_on_file, &
	1830	found &
	1831	) ! ToDo: change interface to pass variable
[3762]	1832	!
[3766]	1833	!-- Surface data do not need overlap data, so do not pass these information.
[4039]	1834	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
[4047]	1835
[4039]	1836	IF ( .NOT. found ) CALL user_rrd_local( &
[3767]	1837	map_index, &
[3766]	1838	nxlf, nxlc, nxl_on_file, &
	1839	nxrf, nxrc, nxr_on_file, &
	1840	nynf, nync, nyn_on_file, &
	1841	nysf, nysc, nys_on_file, &
	1842	tmp_3d, found &
	1843	) ! ToDo: change interface to pass variable
[3637]	1844
[3987]	1845	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
[3637]	1846
[3987]	1847
[3766]	1848	END SUBROUTINE module_interface_rrd_local
[3637]	1849
	1850
	1851	!------------------------------------------------------------------------------!
	1852	! Description:
	1853	! ------------
	1854	!> Write module-specific restart data specific to local MPI ranks
	1855	!------------------------------------------------------------------------------!
[3766]	1856	SUBROUTINE module_interface_wrd_local
[3637]	1857
	1858
[3987]	1859	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
	1860
[4047]	1861	CALL dynamics_wrd_local
	1862
[3766]	1863	IF ( biometeorology ) CALL bio_wrd_local
	1864	IF ( bulk_cloud_model ) CALL bcm_wrd_local
	1865	IF ( air_chemistry ) CALL chem_wrd_local
[4039]	1866	CALL doq_wrd_local
[3766]	1867	IF ( gust_module_enabled ) CALL gust_wrd_local
[4047]	1868	IF ( particle_advection ) CALL lpm_wrd_local
[3766]	1869	IF ( land_surface ) CALL lsm_wrd_local
[4360]	1870	IF ( plant_canopy ) CALL pcm_wrd_local
[3766]	1871	IF ( ocean_mode ) CALL ocean_wrd_local
	1872	IF ( radiation ) CALL radiation_wrd_local
	1873	IF ( salsa ) CALL salsa_wrd_local
	1874	IF ( urban_surface ) CALL usm_wrd_local
	1875	IF ( surface_output ) CALL surface_data_output_wrd_local
[4047]	1876
[3766]	1877	IF ( user_module_enabled ) CALL user_wrd_local
[3637]	1878
[3987]	1879	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
[3637]	1880
[3987]	1881
[3766]	1882	END SUBROUTINE module_interface_wrd_local
[3637]	1883
	1884
[3687]	1885	!------------------------------------------------------------------------------!
	1886	! Description:
	1887	! ------------
	1888	!> Perform module-specific last actions before the program terminates
	1889	!------------------------------------------------------------------------------!
[3766]	1890	SUBROUTINE module_interface_last_actions
[3687]	1891
	1892
[3987]	1893	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
	1894
[4047]	1895	CALL dynamics_last_actions
	1896
[3766]	1897	IF ( virtual_measurement ) CALL vm_last_actions
[4047]	1898
[3766]	1899	IF ( user_module_enabled ) CALL user_last_actions
[3687]	1900
[3987]	1901	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
[3687]	1902
[3987]	1903
[3766]	1904	END SUBROUTINE module_interface_last_actions
[3687]	1905
[3766]	1906
	1907	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |