Home

Context Navigation

source: palm/trunk/SOURCE/module_interface.f90 @ 4340

Last change on this file since 4340 was 4331, checked in by suehring, 5 years ago
New diagnostic output for 10-m wind speed; Diagnostic output of 2-m potential temperature moved to diagnostic output
Property svn:keywords set to `Id`
File size: 84.4 KB

Rev	Line
[3637]	1	!> @file module_interface.f90
	2	!------------------------------------------------------------------------------!
	3	! This file is part of PALM.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[3648]	17	! Copyright 1997-2019 Leibniz Universitaet Hannover
[3637]	18	!------------------------------------------------------------------------------!
	19	!
	20	! Current revisions:
	21	! -----------------
	22	!
[3745]	23	!
[3637]	24	! Former revisions:
	25	! -----------------
[3770]	26	! $Id: module_interface.f90 4331 2019-12-10 18:25:02Z Giersch $
[4331]	27	! Change interface for doq_check_data_output, in order to perform further
	28	! output checks.
	29	!
	30	! 4281 2019-10-29 15:15:39Z schwenkel
[4281]	31	! Added dynamics boundary conditions
	32	!
	33	! 4272 2019-10-23 15:18:57Z schwenkel
[4272]	34	! Further modularization of boundary conditions: moved boundary conditions to
	35	! respective modules
	36	!
	37	! 4268 2019-10-17 11:29:38Z schwenkel
[4268]	38	! Introduction of module_interface_boundary_conditions
	39	!
	40	! 4182 2019-08-22 15:20:23Z scharf
[4182]	41	! Corrected "Former revisions" section
	42	!
	43	! 4173 2019-08-20 12:04:06Z gronemeier
[4173]	44	! add vdi_internal_controls
	45	!
	46	! 4157 2019-08-14 09:19:12Z suehring
[4157]	47	! Call doq_init from module interface
	48	!
	49	! 4132 2019-08-02 12:34:17Z suehring
[4132]	50	! Bugfix in masked data output for diagnostic quantities
	51	!
	52	! 4131 2019-08-02 11:06:18Z monakurppa
[4127]	53	! Add output of 3D plant-canopy outputs (merge from branch resler)
	54	!
	55	! 4048 2019-06-21 21:00:21Z knoop
[4048]	56	! Moved turbulence_closure_mod calls into this module_interface
	57	!
	58	! 4047 2019-06-21 18:58:09Z knoop
[4047]	59	! Introduction of the dynamics module
	60	!
	61	! 4039 2019-06-18 10:32:41Z suehring
[4039]	62	! Introduce diagnostic output
[4047]	63	!
[4039]	64	! 4028 2019-06-13 12:21:37Z schwenkel
[4028]	65	! Further modularization of particle code components
[4047]	66	!
[4028]	67	! 4017 2019-06-06 12:16:46Z schwenkel
[4047]	68	! local_pf need INTENT(INOUT) attribute rather than INTENT(OUT). This is
[4004]	69	! because INTENT(OUT) sets the array to not-defined. Especially for outputs that
[4047]	70	! are not defined everywhere, e.g. land-surface outputs, this will be
	71	! problematic as NaN will be output.
	72	!
[4004]	73	! 3987 2019-05-22 09:52:13Z kanani
[3987]	74	! Introduce switchable DEBUG file output via debug_message routine
[4047]	75	!
[3987]	76	! 3956 2019-05-07 12:32:52Z monakurppa
[4047]	77	! - Added calls for salsa_non_advective_processes and
[3956]	78	! salsa_exchange_horiz_bounds
	79	! - Moved the call for salsa_data_output_2d/3d before that of
	80	! radiation_data_output_2d/3d. radiation_data_output_2d/3d tries to read a
	81	! salsa output variable and encounters a segmentation fault for "Ntot" due
	82	! to the shortoutput name
[4047]	83	!
[3956]	84	! 3931 2019-04-24 16:34:28Z schwenkel
[3931]	85	! Changed non_transport_physics to non_advective_processes
[4047]	86	!
[3931]	87	! 3930 2019-04-24 14:57:18Z forkel
[3929]	88	! Correct/complete module_interface introduction for chemistry model
	89	!
	90	! 3887 2019 -04-12 08:47:41Z schwenkel
[4047]	91	! Changes related to global restructuring of location messages and introduction
[3885]	92	! of additional debug messages
[4047]	93	!
[3929]	94	! 3880 2019 -04-08 21:43:02Z knoop
[3864]	95	! Add a call for salsa_prognostic_equations
[4047]	96	!
[3864]	97	! 3840 2019-03-29 10:35:52Z knoop
[3806]	98	! bugfix: intent of dummy arguments changed to inout
[4047]	99	!
[3806]	100	! 3770 2019-02-28 11:22:32Z moh.hefny
[3769]	101	! removed unused variables in module_interface_check_data_output_ts
[3770]	102	!
[3769]	103	! 3767 08:18:02Z raasch
[3767]	104	! unused variable file_index removed from subroutine parameter list
[4047]	105	!
[3767]	106	! 3766 2019-02-26 16:23:41Z raasch
[3766]	107	! first argument removed from module_interface_rrd_*, statement added to avoid
	108	! compiler warning about unused variable, file reformatted with respect to coding
	109	! standards
[4047]	110	!
[3766]	111	! 3762 2019-02-25 16:54:16Z suehring
[3762]	112	! only pass required arguments to surface_data_output_rrd_local
[4047]	113	!
[3762]	114	! 3747 2019-02-16 15:15:23Z gronemeier
[3747]	115	! Call user_init_arrays
[4047]	116	!
[3747]	117	! 3745 2019-02-15 18:57:56Z suehring
[3745]	118	! Add indoor model
[4047]	119	!
[3745]	120	! 3744 2019-02-15 18:38:58Z suehring
[3739]	121	! Removed bio_check_parameters as the method is empty.
[4047]	122	!
[3739]	123	! 3735 2019-02-12 09:52:40Z dom_dwd_user
[4047]	124	! Accepting variable j from check_parameters and passing it to
[3735]	125	! bio_check_data_output
	126	! Add required restart data for surface output module
[4047]	127	!
[3735]	128	! 3731 2019-02-11 13:06:27Z suehring
[3717]	129	! Add check_parameters routine for virtual measurements
[4047]	130	!
[3717]	131	! 3711 2019-01-31 13:44:26Z knoop
[3711]	132	! Introduced module_interface_init_checks for post-init checks
[4047]	133	!
[3711]	134	! 3705 2019-01-29 19:56:39Z suehring
[3705]	135	! Add last_actions for virtual measurements
[4047]	136	!
[3705]	137	! 3704 2019-01-29 19:51:41Z suehring
[3685]	138	! Some interface calls moved to module_interface + cleanup
[4047]	139	!
[3685]	140	! 3684 2019-01-20 20:20:58Z knoop
[3655]	141	! Bugfix: made unit intend INOUT
[4047]	142	!
[3655]	143	! 3650 2019-01-04 13:01:33Z kanani
[3650]	144	! Add restart routines for biometeorology
[4047]	145	!
[3650]	146	! 3649 2019-01-02 16:52:21Z suehring
[3649]	147	! Initialize strings, in order to avoid compiler warnings for non-initialized
	148	! characters with intent(out) attribute
[4047]	149	!
[3649]	150	! 3648 2019-01-02 16:35:46Z suehring
[4182]	151	! 3641 2018-12-23 22:10:01Z knoop
	152	! Initial implementation of the PALM module interface
[4047]	153	!
[3637]	154	!
	155	! Description:
	156	! ------------
	157	!> This is the interface between the PALM model core and all its modules.
	158	!>
[3731]	159	!> @todo Re-format module to be consistent with coding standard
[3637]	160	!------------------------------------------------------------------------------!
[3766]	161	MODULE module_interface
[3637]	162
[3766]	163	USE indices, &
	164	ONLY: nbgp, nxl, nxlg, nxr, nxrg, nys, nysg, nyn, nyng, nzb, nzt
[3637]	165
[3766]	166	USE kinds
[3637]	167
[3766]	168	!
	169	!-- load module-specific control parameters.
	170	!-- ToDo: move all of them to respective module or a dedicated central module
[4047]	171
	172	USE dynamics_mod, &
	173	ONLY: dynamics_parin, &
	174	dynamics_check_parameters, &
	175	dynamics_check_data_output_ts, &
	176	dynamics_check_data_output_pr, &
	177	dynamics_check_data_output, &
	178	dynamics_init_masks, &
	179	dynamics_define_netcdf_grid, &
	180	dynamics_init_arrays, &
	181	dynamics_init, &
	182	dynamics_init_checks, &
	183	dynamics_header, &
	184	dynamics_actions, &
	185	dynamics_non_advective_processes, &
	186	dynamics_exchange_horiz, &
	187	dynamics_prognostic_equations, &
[4281]	188	dynamics_boundary_conditions, &
[4047]	189	dynamics_swap_timelevel, &
	190	dynamics_3d_data_averaging, &
	191	dynamics_data_output_2d, &
	192	dynamics_data_output_3d, &
	193	dynamics_statistics, &
	194	dynamics_rrd_global, &
	195	dynamics_rrd_local, &
	196	dynamics_wrd_global, &
	197	dynamics_wrd_local, &
	198	dynamics_last_actions
	199
	200	USE turbulence_closure_mod, &
[4048]	201	ONLY: tcm_check_parameters, &
	202	tcm_check_data_output, &
	203	tcm_init_arrays, &
	204	tcm_init, &
	205	tcm_actions, &
	206	tcm_prognostic_equations, &
[4281]	207	tcm_boundary_conds, &
[4048]	208	tcm_swap_timelevel, &
	209	tcm_3d_data_averaging, &
	210	tcm_data_output_2d, &
	211	tcm_data_output_3d
[4047]	212
[3766]	213	USE control_parameters, &
[3987]	214	ONLY: air_chemistry, &
	215	biometeorology, &
	216	debug_output, &
	217	debug_output_timestep, &
[3766]	218	indoor_model, &
	219	land_surface, &
	220	large_scale_forcing, &
	221	nesting_offline, &
	222	nudging, &
	223	ocean_mode, &
	224	plant_canopy, &
	225	salsa, &
	226	surface_output, &
	227	syn_turb_gen, &
	228	urban_surface, &
[4173]	229	vdi_checks, &
[3766]	230	virtual_flight, &
	231	virtual_measurement, &
	232	wind_turbine
[3637]	233
[3766]	234	!
	235	!-- load interface routines of all PALM modules
	236	USE biometeorology_mod, &
	237	ONLY: bio_parin, &
	238	bio_check_data_output, &
	239	bio_init, &
	240	bio_init_checks, &
	241	bio_header, &
	242	bio_3d_data_averaging, &
	243	bio_data_output_2d, &
	244	bio_data_output_3d, &
	245	bio_rrd_global, &
	246	bio_rrd_local, &
	247	bio_wrd_global, &
	248	bio_wrd_local
[3637]	249
[3766]	250	USE bulk_cloud_model_mod, &
	251	ONLY: bulk_cloud_model, &
	252	bcm_parin, &
	253	bcm_check_parameters, &
	254	bcm_check_data_output_pr, &
	255	bcm_check_data_output, &
	256	bcm_init_arrays, &
	257	bcm_init, &
	258	bcm_header, &
[3870]	259	bcm_actions, &
[3931]	260	bcm_non_advective_processes, &
[3956]	261	bcm_exchange_horiz, &
[3870]	262	bcm_prognostic_equations, &
[4268]	263	bcm_boundary_conditions, &
[3766]	264	bcm_swap_timelevel, &
	265	bcm_3d_data_averaging, &
	266	bcm_data_output_2d, &
	267	bcm_data_output_3d, &
	268	bcm_rrd_global, &
	269	bcm_wrd_global, &
	270	bcm_rrd_local, &
	271	bcm_wrd_local
[3637]	272
	273	USE chemistry_model_mod, &
	274	ONLY: chem_parin, &
	275	chem_check_parameters, &
	276	chem_check_data_output_pr, &
	277	chem_check_data_output, &
[3929]	278	chem_exchange_horiz_bounds, &
[3685]	279	chem_init_arrays, &
	280	chem_init, &
[3637]	281	chem_header, &
[3877]	282	chem_actions, &
[3930]	283	chem_non_advective_processes, &
[3880]	284	chem_prognostic_equations, &
[4268]	285	chem_boundary_conditions, &
[3637]	286	chem_swap_timelevel, &
	287	chem_3d_data_averaging, &
	288	chem_data_output_2d, &
	289	chem_data_output_3d, &
	290	chem_statistics, &
	291	chem_rrd_local, &
[3887]	292	chem_wrd_local
[4047]	293
	294	USE diagnostic_output_quantities_mod, &
[4039]	295	ONLY: doq_3d_data_averaging, &
	296	doq_check_data_output, &
	297	doq_define_netcdf_grid, &
[4157]	298	doq_init, &
[4039]	299	doq_output_2d, &
	300	doq_output_3d, &
	301	doq_wrd_local
	302	! doq_rrd_local, &
[3637]	303
[3766]	304	USE flight_mod, &
	305	ONLY: flight_parin, &
	306	flight_header, &
	307	flight_init, &
	308	flight_rrd_global, &
	309	flight_wrd_global
[3637]	310
[3766]	311	USE gust_mod, &
	312	ONLY: gust_module_enabled, &
	313	gust_parin, &
	314	gust_check_parameters, &
	315	gust_check_data_output_pr, &
	316	gust_check_data_output, &
	317	gust_init_arrays, &
	318	gust_init, &
	319	gust_header, &
	320	gust_actions, &
[3837]	321	gust_prognostic_equations, &
[3766]	322	gust_swap_timelevel, &
	323	gust_3d_data_averaging, &
	324	gust_data_output_2d, &
	325	gust_data_output_3d, &
	326	gust_statistics, &
	327	gust_rrd_global, &
	328	gust_wrd_global, &
	329	gust_rrd_local, &
	330	gust_wrd_local
[3637]	331
[3766]	332	USE indoor_model_mod, &
	333	ONLY: im_parin, &
	334	im_check_data_output, &
	335	im_check_parameters, &
	336	im_data_output_3d, &
	337	im_init
[4047]	338
[4017]	339	USE lagrangian_particle_model_mod, &
	340	ONLY: lpm_parin, &
	341	lpm_header, &
	342	lpm_check_parameters, &
[4047]	343	lpm_init_arrays, &
[4017]	344	lpm_init, &
	345	lpm_actions, &
	346	lpm_rrd_global, &
	347	lpm_rrd_local, &
	348	lpm_wrd_local, &
	349	lpm_wrd_global
[4047]	350
[3766]	351	USE land_surface_model_mod, &
	352	ONLY: lsm_parin, &
	353	lsm_check_parameters, &
	354	lsm_check_data_output_pr, &
	355	lsm_check_data_output, &
	356	lsm_init_arrays, &
	357	lsm_init, &
	358	lsm_header, &
	359	lsm_swap_timelevel, &
	360	lsm_3d_data_averaging, &
	361	lsm_data_output_2d, &
	362	lsm_rrd_local, &
	363	lsm_wrd_local
[3637]	364
[3766]	365	USE lsf_nudging_mod, &
	366	ONLY: lsf_nudging_check_parameters, &
	367	lsf_nudging_check_data_output_pr, &
	368	lsf_init, &
	369	nudge_init, &
	370	lsf_nudging_header
[3637]	371
[3766]	372	USE multi_agent_system_mod, &
	373	ONLY: mas_parin
[3637]	374
[3766]	375	USE nesting_offl_mod, &
	376	ONLY: nesting_offl_parin, &
	377	nesting_offl_check_parameters, &
	378	nesting_offl_header
[3637]	379
[3766]	380	USE ocean_mod, &
	381	ONLY: ocean_parin, &
	382	ocean_check_parameters, &
	383	ocean_check_data_output_pr, &
	384	ocean_check_data_output, &
	385	ocean_init_arrays, &
	386	ocean_init, &
	387	ocean_header, &
[3873]	388	ocean_actions, &
[3840]	389	ocean_prognostic_equations, &
[4272]	390	ocean_boundary_conditions, &
[3766]	391	ocean_swap_timelevel, &
	392	ocean_3d_data_averaging, &
	393	ocean_data_output_2d, &
	394	ocean_data_output_3d, &
	395	ocean_rrd_global, &
	396	ocean_wrd_global, &
	397	ocean_rrd_local, &
	398	ocean_wrd_local
[4047]	399
[4017]	400	USE particle_attributes, &
[4047]	401	ONLY: particle_advection
[3637]	402
[3766]	403	USE plant_canopy_model_mod, &
	404	ONLY: pcm_parin, &
	405	pcm_check_parameters, &
	406	pcm_check_data_output, &
	407	pcm_init, &
	408	pcm_header, &
[4127]	409	pcm_3d_data_averaging, &
[3766]	410	pcm_data_output_3d
[3637]	411
[3766]	412	USE radiation_model_mod, &
	413	ONLY: radiation, &
	414	radiation_parin, &
	415	radiation_check_parameters, &
	416	radiation_check_data_output_ts, &
	417	radiation_check_data_output_pr, &
	418	radiation_check_data_output, &
	419	radiation_init, &
	420	radiation_header, &
	421	radiation_3d_data_averaging, &
	422	radiation_data_output_2d, &
	423	radiation_data_output_3d, &
	424	radiation_rrd_local, &
	425	radiation_wrd_local
[3637]	426
[3766]	427	USE salsa_mod, &
	428	ONLY: salsa_parin, &
	429	salsa_check_parameters, &
[4131]	430	salsa_check_data_output_pr, &
[3766]	431	salsa_check_data_output, &
	432	salsa_init_arrays, &
	433	salsa_init, &
	434	salsa_header, &
[3871]	435	salsa_actions, &
[3956]	436	salsa_non_advective_processes, &
	437	salsa_exchange_horiz_bounds, &
[3864]	438	salsa_prognostic_equations, &
[4268]	439	salsa_boundary_conditions, &
[3766]	440	salsa_swap_timelevel, &
	441	salsa_3d_data_averaging, &
	442	salsa_data_output_2d, &
	443	salsa_data_output_3d, &
[4131]	444	salsa_statistics, &
[3766]	445	salsa_rrd_local, &
	446	salsa_wrd_local
[3637]	447
[3766]	448	USE spectra_mod, &
	449	ONLY: calculate_spectra, &
	450	spectra_parin, &
	451	spectra_check_parameters, &
	452	spectra_header
[3637]	453
[3766]	454	USE surface_data_output_mod, &
	455	ONLY: surface_data_output_parin, &
	456	surface_data_output_check_parameters, &
	457	surface_data_output_init_arrays, &
	458	surface_data_output_rrd_local, &
	459	surface_data_output_rrd_global, &
	460	surface_data_output_wrd_local, &
	461	surface_data_output_wrd_global
[3637]	462
[3766]	463	USE synthetic_turbulence_generator_mod, &
	464	ONLY: stg_parin, &
	465	stg_check_parameters, &
	466	stg_header, &
	467	stg_rrd_global, &
	468	stg_wrd_global
[3637]	469
[3766]	470	USE urban_surface_mod, &
	471	ONLY: usm_parin, &
	472	usm_check_parameters, &
	473	usm_check_data_output, &
	474	usm_init_arrays, &
	475	usm_init, &
	476	usm_swap_timelevel, &
	477	usm_3d_data_averaging, &
	478	usm_rrd_local, &
	479	usm_wrd_local
[3637]	480
[4173]	481	USE vdi_internal_controls, &
	482	ONLY: vdi_actions
	483
[4047]	484	USE virtual_measurement_mod, &
	485	ONLY: vm_check_parameters, &
	486	vm_init, &
	487	vm_last_actions, &
	488	vm_parin
	489
	490	USE wind_turbine_model_mod, &
	491	ONLY: wtm_parin, &
	492	wtm_check_parameters, &
	493	wtm_init_arrays, &
	494	wtm_init, &
	495	wtm_actions, &
	496	wtm_rrd_global, &
	497	wtm_wrd_global
	498
[3766]	499	USE user, &
	500	ONLY: user_module_enabled, &
	501	user_parin, &
	502	user_check_parameters, &
	503	user_check_data_output_ts, &
	504	user_check_data_output_pr, &
	505	user_check_data_output, &
	506	user_init, &
	507	user_init_arrays, &
	508	user_header, &
	509	user_actions, &
	510	user_3d_data_averaging, &
	511	user_data_output_2d, &
	512	user_data_output_3d, &
	513	user_statistics, &
	514	user_rrd_global, &
	515	user_rrd_local, &
	516	user_wrd_global, &
	517	user_wrd_local, &
	518	user_last_actions
[3684]	519
[3766]	520	IMPLICIT NONE
[3637]	521
[3766]	522	PRIVATE
[3637]	523
	524	!
[3766]	525	!-- Public functions
	526	PUBLIC &
	527	module_interface_parin, &
	528	module_interface_check_parameters, &
	529	module_interface_check_data_output_ts, &
	530	module_interface_check_data_output_pr, &
	531	module_interface_check_data_output, &
	532	module_interface_init_masks, &
	533	module_interface_define_netcdf_grid, &
	534	module_interface_init_arrays, &
	535	module_interface_init, &
	536	module_interface_init_checks, &
	537	module_interface_header, &
	538	module_interface_actions, &
[3931]	539	module_interface_non_advective_processes, &
[3887]	540	module_interface_exchange_horiz, &
[3837]	541	module_interface_prognostic_equations, &
[4268]	542	module_interface_boundary_conditions, &
[3766]	543	module_interface_swap_timelevel, &
	544	module_interface_3d_data_averaging, &
	545	module_interface_data_output_2d, &
	546	module_interface_data_output_3d, &
	547	module_interface_statistics, &
	548	module_interface_rrd_global, &
	549	module_interface_wrd_global, &
	550	module_interface_rrd_local, &
	551	module_interface_wrd_local, &
	552	module_interface_last_actions
[3637]	553
	554
[3766]	555	INTERFACE module_interface_parin
	556	MODULE PROCEDURE module_interface_parin
	557	END INTERFACE module_interface_parin
[3637]	558
[3766]	559	INTERFACE module_interface_check_parameters
	560	MODULE PROCEDURE module_interface_check_parameters
	561	END INTERFACE module_interface_check_parameters
[3637]	562
[3766]	563	INTERFACE module_interface_check_data_output_ts
	564	MODULE PROCEDURE module_interface_check_data_output_ts
	565	END INTERFACE module_interface_check_data_output_ts
[3700]	566
[3766]	567	INTERFACE module_interface_check_data_output_pr
	568	MODULE PROCEDURE module_interface_check_data_output_pr
	569	END INTERFACE module_interface_check_data_output_pr
[3637]	570
[3766]	571	INTERFACE module_interface_check_data_output
	572	MODULE PROCEDURE module_interface_check_data_output
	573	END INTERFACE module_interface_check_data_output
[3637]	574
[3766]	575	INTERFACE module_interface_init_masks
	576	MODULE PROCEDURE module_interface_init_masks
	577	END INTERFACE module_interface_init_masks
[3687]	578
[3766]	579	INTERFACE module_interface_define_netcdf_grid
	580	MODULE PROCEDURE module_interface_define_netcdf_grid
	581	END INTERFACE module_interface_define_netcdf_grid
[3637]	582
[3766]	583	INTERFACE module_interface_init_arrays
	584	MODULE PROCEDURE module_interface_init_arrays
	585	END INTERFACE module_interface_init_arrays
[3637]	586
[3766]	587	INTERFACE module_interface_init
	588	MODULE PROCEDURE module_interface_init
	589	END INTERFACE module_interface_init
[3637]	590
[3766]	591	INTERFACE module_interface_init_checks
	592	MODULE PROCEDURE module_interface_init_checks
	593	END INTERFACE module_interface_init_checks
[3711]	594
[3766]	595	INTERFACE module_interface_header
	596	MODULE PROCEDURE module_interface_header
	597	END INTERFACE module_interface_header
[3637]	598
[3766]	599	INTERFACE module_interface_actions
	600	MODULE PROCEDURE module_interface_actions
	601	MODULE PROCEDURE module_interface_actions_ij
	602	END INTERFACE module_interface_actions
[3637]	603
[3931]	604	INTERFACE module_interface_non_advective_processes
	605	MODULE PROCEDURE module_interface_non_advective_processes
	606	MODULE PROCEDURE module_interface_non_advective_processes_ij
	607	END INTERFACE module_interface_non_advective_processes
[4047]	608
[3887]	609	INTERFACE module_interface_exchange_horiz
	610	MODULE PROCEDURE module_interface_exchange_horiz
	611	END INTERFACE module_interface_exchange_horiz
[4047]	612
[3837]	613	INTERFACE module_interface_prognostic_equations
	614	MODULE PROCEDURE module_interface_prognostic_equations
	615	MODULE PROCEDURE module_interface_prognostic_equations_ij
	616	END INTERFACE module_interface_prognostic_equations
	617
[3766]	618	INTERFACE module_interface_swap_timelevel
	619	MODULE PROCEDURE module_interface_swap_timelevel
	620	END INTERFACE module_interface_swap_timelevel
[3637]	621
[4268]	622	INTERFACE module_interface_boundary_conditions
	623	MODULE PROCEDURE module_interface_boundary_conditions
	624	END INTERFACE module_interface_boundary_conditions
	625
[3766]	626	INTERFACE module_interface_3d_data_averaging
	627	MODULE PROCEDURE module_interface_3d_data_averaging
	628	END INTERFACE module_interface_3d_data_averaging
[3637]	629
[3766]	630	INTERFACE module_interface_data_output_2d
	631	MODULE PROCEDURE module_interface_data_output_2d
	632	END INTERFACE module_interface_data_output_2d
[3637]	633
[3766]	634	INTERFACE module_interface_data_output_3d
	635	MODULE PROCEDURE module_interface_data_output_3d
	636	END INTERFACE module_interface_data_output_3d
[3637]	637
[3766]	638	INTERFACE module_interface_statistics
	639	MODULE PROCEDURE module_interface_statistics
	640	END INTERFACE module_interface_statistics
[3637]	641
[3766]	642	INTERFACE module_interface_rrd_global
	643	MODULE PROCEDURE module_interface_rrd_global
	644	END INTERFACE module_interface_rrd_global
[3637]	645
[3766]	646	INTERFACE module_interface_wrd_global
	647	MODULE PROCEDURE module_interface_wrd_global
	648	END INTERFACE module_interface_wrd_global
[3637]	649
[3766]	650	INTERFACE module_interface_rrd_local
	651	MODULE PROCEDURE module_interface_rrd_local
	652	END INTERFACE module_interface_rrd_local
[3637]	653
[3766]	654	INTERFACE module_interface_wrd_local
	655	MODULE PROCEDURE module_interface_wrd_local
	656	END INTERFACE module_interface_wrd_local
[3637]	657
[3766]	658	INTERFACE module_interface_last_actions
	659	MODULE PROCEDURE module_interface_last_actions
	660	END INTERFACE module_interface_last_actions
[3637]	661
[3687]	662
[3766]	663	CONTAINS
[3637]	664
	665
	666	!------------------------------------------------------------------------------!
	667	! Description:
	668	! ------------
	669	!> Read module-specific parameter namelists
	670	!------------------------------------------------------------------------------!
[3766]	671	SUBROUTINE module_interface_parin
[3637]	672
	673
[3987]	674	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'start' )
	675
[4047]	676	CALL dynamics_parin
	677
[3766]	678	CALL bio_parin
	679	CALL bcm_parin
	680	CALL chem_parin
	681	CALL flight_parin ! ToDo: rename module to match filename
	682	CALL gust_parin
	683	CALL im_parin
[4047]	684	CALL lpm_parin
[3766]	685	CALL lsm_parin
	686	! ToDo: create parin routine for large_scale_forcing and nudging (should be seperate modules or new module switch)
	687	CALL mas_parin
	688	CALL nesting_offl_parin
	689	CALL ocean_parin
	690	CALL pcm_parin
	691	CALL radiation_parin
	692	CALL salsa_parin
	693	CALL spectra_parin
	694	CALL surface_data_output_parin
	695	CALL stg_parin
	696	CALL usm_parin
	697	CALL vm_parin
	698	CALL wtm_parin
[3637]	699
[4047]	700	CALL user_parin
	701
[3987]	702	IF ( debug_output ) CALL debug_message( 'reading module-specific parameters', 'end' )
[3637]	703
[3987]	704
[3766]	705	END SUBROUTINE module_interface_parin
[3637]	706
	707
	708	!------------------------------------------------------------------------------!
	709	! Description:
	710	! ------------
	711	!> Perform module-specific initialization checks
	712	!------------------------------------------------------------------------------!
[3766]	713	SUBROUTINE module_interface_check_parameters
[3637]	714
	715
[3987]	716	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'start' )
	717
[4047]	718	CALL dynamics_check_parameters
[4048]	719	CALL tcm_check_parameters
[4047]	720
[3766]	721	IF ( bulk_cloud_model ) CALL bcm_check_parameters
	722	IF ( air_chemistry ) CALL chem_check_parameters
	723	IF ( gust_module_enabled ) CALL gust_check_parameters
	724	IF ( indoor_model ) CALL im_check_parameters
[4047]	725	IF ( particle_advection ) CALL lpm_check_parameters
[3766]	726	IF ( land_surface ) CALL lsm_check_parameters
	727	IF ( large_scale_forcing .OR. nudging ) CALL lsf_nudging_check_parameters ! ToDo: create single module switch
	728	IF ( nesting_offline ) CALL nesting_offl_check_parameters
	729	IF ( ocean_mode ) CALL ocean_check_parameters
	730	IF ( plant_canopy ) CALL pcm_check_parameters
	731	IF ( radiation ) CALL radiation_check_parameters
	732	IF ( salsa ) CALL salsa_check_parameters
	733	IF ( calculate_spectra ) CALL spectra_check_parameters
	734	IF ( surface_output ) CALL surface_data_output_check_parameters
	735	IF ( syn_turb_gen ) CALL stg_check_parameters
	736	IF ( urban_surface ) CALL usm_check_parameters
	737	IF ( virtual_measurement ) CALL vm_check_parameters
	738	IF ( wind_turbine ) CALL wtm_check_parameters
[4047]	739
[3766]	740	IF ( user_module_enabled ) CALL user_check_parameters
[3637]	741
[3987]	742	IF ( debug_output ) CALL debug_message( 'checking module-specific parameters', 'end' )
[3637]	743
[3987]	744
[3766]	745	END SUBROUTINE module_interface_check_parameters
[3637]	746
	747
	748	!------------------------------------------------------------------------------!
	749	! Description:
	750	! ------------
[3700]	751	!> Check module-specific data output of timeseries
	752	!------------------------------------------------------------------------------!
[3766]	753	SUBROUTINE module_interface_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
[3700]	754
	755
[3766]	756	INTEGER(iwp), INTENT(IN) :: dots_max !< variable output array index
	757	INTEGER(iwp), INTENT(INOUT) :: dots_num !< variable output array index
	758	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_label
	759	CHARACTER (LEN=*), DIMENSION(dots_max), INTENT(INOUT) :: dots_unit
[3700]	760
	761
[3987]	762	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'start' )
	763
[4047]	764	CALL dynamics_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
	765
[3766]	766	IF ( radiation ) THEN
[3769]	767	CALL radiation_check_data_output_ts( dots_max, dots_num )
[3766]	768	ENDIF
[3700]	769
[3766]	770	IF ( user_module_enabled ) THEN
	771	CALL user_check_data_output_ts( dots_max, dots_num, dots_label, dots_unit )
	772	ENDIF
[3700]	773
[3987]	774	IF ( debug_output ) CALL debug_message( 'checking module-specific data output ts', 'end' )
[3700]	775
[3987]	776
[3766]	777	END SUBROUTINE module_interface_check_data_output_ts
[3700]	778
	779
	780	!------------------------------------------------------------------------------!
	781	! Description:
	782	! ------------
[3637]	783	!> Check module-specific data output of profiles
	784	!------------------------------------------------------------------------------!
[3766]	785	SUBROUTINE module_interface_check_data_output_pr( variable, var_count, unit, &
	786	dopr_unit )
[3637]	787
	788
[3766]	789	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	790	INTEGER(iwp), INTENT(IN) :: var_count !< variable output array index
	791	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
	792	CHARACTER (LEN=*), INTENT(OUT) :: dopr_unit !< local value of dopr_unit
[3637]	793
[3987]	794
	795	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'start' )
	796
[4047]	797	CALL dynamics_check_data_output_pr( variable, var_count, unit, dopr_unit )
	798
[3766]	799	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
	800	CALL bcm_check_data_output_pr( variable, var_count, unit, dopr_unit )
	801	ENDIF
[3637]	802
[3766]	803	IF ( unit == 'illegal' .AND. air_chemistry ) THEN
	804	CALL chem_check_data_output_pr( variable, var_count, unit, dopr_unit )
	805	ENDIF
[3637]	806
[3766]	807	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
	808	CALL gust_check_data_output_pr( variable, var_count, unit, dopr_unit )
	809	ENDIF
[3637]	810
[3766]	811	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	812	CALL lsm_check_data_output_pr( variable, var_count, unit, dopr_unit )
	813	ENDIF
[3637]	814
[3766]	815	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	816	CALL lsf_nudging_check_data_output_pr( variable, var_count, unit, dopr_unit )
	817	ENDIF
[3637]	818
[3766]	819	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
	820	CALL ocean_check_data_output_pr( variable, var_count, unit, dopr_unit )
	821	ENDIF
[3637]	822
[3766]	823	IF ( unit == 'illegal' .AND. radiation ) THEN
	824	CALL radiation_check_data_output_pr( variable, var_count, unit, dopr_unit )
	825	ENDIF
[3637]	826
[4131]	827	IF ( unit == 'illegal' .AND. salsa ) THEN
	828	CALL salsa_check_data_output_pr( variable, var_count, unit, dopr_unit )
	829	ENDIF
	830
[3766]	831	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	832	unit = '' ! ToDo: Seems like a hack. Find a general soultion!
	833	CALL user_check_data_output_pr( variable, var_count, unit, dopr_unit )
	834	ENDIF
[3637]	835
[3987]	836	IF ( debug_output ) CALL debug_message( 'checking module-specific data output pr', 'end' )
[3637]	837
[3987]	838
[3766]	839	END SUBROUTINE module_interface_check_data_output_pr
[3637]	840
	841	!------------------------------------------------------------------------------!
	842	! Description:
	843	! ------------
	844	!> Check module-specific 2D and 3D data output
	845	!------------------------------------------------------------------------------!
[3766]	846	SUBROUTINE module_interface_check_data_output( variable, unit, i, j, ilen, k )
[3637]	847
	848
[3766]	849	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	850	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
[3637]	851
[3766]	852	INTEGER(iwp), INTENT(IN) :: i !< ToDo: remove dummy argument, instead pass string from data_output
	853	INTEGER(iwp), INTENT(IN) :: j !< average quantity? 0 = no, 1 = yes
	854	INTEGER(iwp), INTENT(IN) :: ilen !< ToDo: remove dummy argument, instead pass string from data_output
	855	INTEGER(iwp), INTENT(IN) :: k !< ToDo: remove dummy argument, instead pass string from data_output
[3637]	856
[3987]	857
	858	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'start' )
	859
[4047]	860	CALL dynamics_check_data_output( variable, unit )
	861
[4048]	862	CALL tcm_check_data_output( variable, unit )
	863
[3766]	864	IF ( unit == 'illegal' .AND. biometeorology ) THEN
	865	CALL bio_check_data_output( variable, unit, i, j, ilen, k )
	866	ENDIF
[3637]	867
[3766]	868	IF ( unit == 'illegal' .AND. bulk_cloud_model ) THEN
	869	CALL bcm_check_data_output( variable, unit )
	870	ENDIF
[3637]	871
[3766]	872	IF ( unit == 'illegal' .AND. air_chemistry &
	873	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
	874	CALL chem_check_data_output( variable, unit, i, ilen, k )
	875	ENDIF
[4047]	876
[4039]	877	IF ( unit == 'illegal' ) THEN
[4331]	878	CALL doq_check_data_output( variable, unit, i, ilen, k )
[4039]	879	ENDIF
[3637]	880
[3766]	881	IF ( unit == 'illegal' .AND. gust_module_enabled ) THEN
	882	CALL gust_check_data_output( variable, unit )
	883	ENDIF
[3637]	884
[3766]	885	IF ( unit == 'illegal' ) THEN ! ToDo: add module switch if possible
	886	CALL lsm_check_data_output( variable, unit, i, ilen, k )
	887	ENDIF
[3637]	888
[3766]	889	IF ( unit == 'illegal' .AND. ocean_mode ) THEN
	890	CALL ocean_check_data_output( variable, unit )
	891	ENDIF
[3637]	892
[3766]	893	IF ( unit == 'illegal' .AND. plant_canopy &
	894	.AND. variable(1:4) == 'pcm_' ) THEN ! ToDo: remove aditional conditions
	895	CALL pcm_check_data_output( variable, unit )
	896	ENDIF
[3637]	897
[3766]	898	IF ( unit == 'illegal' .AND. radiation ) THEN
	899	CALL radiation_check_data_output( variable, unit, i, ilen, k )
	900	ENDIF
[3637]	901
[3766]	902	IF ( unit == 'illegal' .AND. salsa ) THEN
[3637]	903	CALL salsa_check_data_output( variable, unit )
[3766]	904	ENDIF
[3637]	905
[3766]	906	IF ( unit == 'illegal' .AND. indoor_model ) THEN
[3744]	907	CALL im_check_data_output( variable, unit )
[3766]	908	ENDIF
[4047]	909
[3766]	910	IF ( unit == 'illegal' .AND. urban_surface &
[3637]	911	.AND. variable(1:4) == 'usm_' ) THEN ! ToDo: remove aditional conditions
	912	CALL usm_check_data_output( variable, unit )
[3766]	913	ENDIF
[3637]	914
[3766]	915	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	916	unit = ''
	917	CALL user_check_data_output( variable, unit )
	918	ENDIF
[3637]	919
[3987]	920	IF ( debug_output ) CALL debug_message( 'checking module-specific data output 2d/3d', 'end' )
[3637]	921
[3987]	922
[3766]	923	END SUBROUTINE module_interface_check_data_output
[3637]	924
	925
	926	!------------------------------------------------------------------------------!
	927	!
	928	! Description:
	929	! ------------
[3687]	930	!> Interface for init_masks. ToDo: get rid of these redundant calls!
	931	!------------------------------------------------------------------------------!
[3766]	932	SUBROUTINE module_interface_init_masks( variable, unit )
[3687]	933
	934
[3766]	935	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	936	CHARACTER (LEN=*), INTENT(INOUT) :: unit !< physical unit of variable
[3687]	937
[3987]	938
	939	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'start' )
	940
[4047]	941	CALL dynamics_init_masks( variable, unit )
	942
[3766]	943	IF ( unit == 'illegal' .AND. air_chemistry &
	944	.AND. (variable(1:3) == 'kc_' .OR. variable(1:3) == 'em_') ) THEN ! ToDo: remove aditional conditions
	945	CALL chem_check_data_output( variable, unit, 0, 0, 0 )
	946	ENDIF
[4132]	947
	948	IF ( unit == 'illegal' ) THEN
	949	CALL doq_check_data_output( variable, unit )
	950	ENDIF
[3687]	951
[3766]	952	IF ( unit == 'illegal' .AND. radiation ) THEN
	953	CALL radiation_check_data_output( variable, unit, 0, 0, 0 )
	954	ENDIF
[3687]	955
[3766]	956	IF ( unit == 'illegal' .AND. salsa ) THEN
	957	CALL salsa_check_data_output( variable, unit )
	958	ENDIF
[3687]	959
[3766]	960	IF ( unit == 'illegal' .AND. user_module_enabled ) THEN
	961	unit = ''
	962	CALL user_check_data_output( variable, unit )
	963	ENDIF
[3687]	964
[3987]	965	IF ( debug_output ) CALL debug_message( 'initializing module-specific masks', 'end' )
[3687]	966
[3987]	967
[3766]	968	END SUBROUTINE module_interface_init_masks
[3687]	969
	970
	971	!------------------------------------------------------------------------------!
	972	!
	973	! Description:
	974	! ------------
[3637]	975	!> Define appropriate grid for module-specific netcdf output variables.
	976	!------------------------------------------------------------------------------!
[3766]	977	SUBROUTINE module_interface_define_netcdf_grid( var, found, &
	978	grid_x, grid_y, grid_z )
[3637]	979
	980
[3766]	981	CHARACTER (LEN=*), INTENT(IN) :: var !< variable name
	982	LOGICAL, INTENT(OUT) :: found !< indicates if variable was found
	983	CHARACTER (LEN=*), INTENT(OUT) :: grid_x !< netcdf dimension in x-direction
	984	CHARACTER (LEN=*), INTENT(OUT) :: grid_y !< netcdf dimension in y-direction
	985	CHARACTER (LEN=*), INTENT(OUT) :: grid_z !< netcdf dimension in z-direction
[3987]	986
	987
	988	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'start' )
[3649]	989	!
[3766]	990	!-- As long as no action is done in this subroutine, initialize strings with
	991	!-- intent(out) attribute, in order to avoid compiler warnings.
	992	found = .FALSE.
	993	grid_x = 'none'
	994	grid_y = 'none'
	995	grid_z = 'none'
	996	!
	997	!-- Use var to avoid compiler warning about unused variable
	998	IF ( var == ' ' ) RETURN
[3637]	999
[3987]	1000	IF ( debug_output ) CALL debug_message( 'defining module-specific netcdf grids', 'end' )
	1001
	1002
[3766]	1003	END SUBROUTINE module_interface_define_netcdf_grid
[3637]	1004
	1005
	1006	!------------------------------------------------------------------------------!
	1007	! Description:
	1008	! ------------
	1009	!> Allocate module-specific arrays and pointers
	1010	!------------------------------------------------------------------------------!
[3766]	1011	SUBROUTINE module_interface_init_arrays
[3637]	1012
	1013
[3987]	1014	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'start' )
[3885]	1015
[4047]	1016	CALL dynamics_init_arrays
[4048]	1017	CALL tcm_init_arrays
[4047]	1018
[3766]	1019	IF ( bulk_cloud_model ) CALL bcm_init_arrays
	1020	IF ( air_chemistry ) CALL chem_init_arrays
	1021	IF ( gust_module_enabled ) CALL gust_init_arrays
[4047]	1022	IF ( particle_advection ) CALL lpm_init_arrays
[3766]	1023	IF ( land_surface ) CALL lsm_init_arrays
	1024	IF ( ocean_mode ) CALL ocean_init_arrays
	1025	IF ( salsa ) CALL salsa_init_arrays
	1026	IF ( urban_surface ) CALL usm_init_arrays
	1027	IF ( surface_output ) CALL surface_data_output_init_arrays
	1028	IF ( wind_turbine ) CALL wtm_init_arrays
[4047]	1029
[3766]	1030	IF ( user_module_enabled ) CALL user_init_arrays
[3685]	1031
[3987]	1032	IF ( debug_output ) CALL debug_message( 'initializing module-specific arrays', 'end' )
[3685]	1033
[3885]	1034
[3766]	1035	END SUBROUTINE module_interface_init_arrays
[3637]	1036
	1037
	1038	!------------------------------------------------------------------------------!
	1039	! Description:
	1040	! ------------
	1041	!> Perform module-specific initialization
	1042	!------------------------------------------------------------------------------!
[3766]	1043	SUBROUTINE module_interface_init
[3637]	1044
	1045
[3987]	1046	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'start' )
[3885]	1047
[4047]	1048	CALL dynamics_init
[4048]	1049	CALL tcm_init
[4047]	1050
[3766]	1051	IF ( biometeorology ) CALL bio_init
	1052	IF ( bulk_cloud_model ) CALL bcm_init
	1053	IF ( air_chemistry ) CALL chem_init
	1054	IF ( virtual_flight ) CALL flight_init
	1055	IF ( gust_module_enabled ) CALL gust_init
	1056	IF ( indoor_model ) CALL im_init
[4047]	1057	IF ( particle_advection ) CALL lpm_init
[3766]	1058	IF ( large_scale_forcing ) CALL lsf_init
	1059	IF ( land_surface ) CALL lsm_init
	1060	IF ( nudging ) CALL nudge_init
	1061	IF ( ocean_mode ) CALL ocean_init
	1062	IF ( plant_canopy ) CALL pcm_init
	1063	IF ( salsa ) CALL salsa_init
	1064	IF ( urban_surface ) CALL usm_init
	1065	IF ( virtual_measurement ) CALL vm_init
	1066	IF ( wind_turbine ) CALL wtm_init
	1067	IF ( radiation ) CALL radiation_init
[4047]	1068
[4157]	1069	CALL doq_init
	1070
[3766]	1071	IF ( user_module_enabled ) CALL user_init
[3685]	1072
[3987]	1073	IF ( debug_output ) CALL debug_message( 'module-specific initialization', 'end' )
[3685]	1074
[3885]	1075
[3766]	1076	END SUBROUTINE module_interface_init
[3637]	1077
	1078
	1079	!------------------------------------------------------------------------------!
	1080	! Description:
	1081	! ------------
[3711]	1082	!> Perform module-specific post-initialization checks
	1083	!------------------------------------------------------------------------------!
[3766]	1084	SUBROUTINE module_interface_init_checks
[3711]	1085
	1086
[3987]	1087	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'start' )
	1088
[4047]	1089	CALL dynamics_init_checks
	1090
[3766]	1091	IF ( biometeorology ) CALL bio_init_checks
[3711]	1092
[3987]	1093	IF ( debug_output ) CALL debug_message( 'module-specific post-initialization checks', 'end' )
[3711]	1094
[3987]	1095
[3766]	1096	END SUBROUTINE module_interface_init_checks
[3711]	1097
	1098
	1099	!------------------------------------------------------------------------------!
	1100	! Description:
	1101	! ------------
[3637]	1102	!> Gather module-specific header output
	1103	!------------------------------------------------------------------------------!
[3766]	1104	SUBROUTINE module_interface_header( io )
[3637]	1105
	1106
[3766]	1107	INTEGER(iwp), INTENT(IN) :: io !< unit of the output file
[3637]	1108
	1109
[3987]	1110	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'start' )
	1111
[4047]	1112	CALL dynamics_header( io )
	1113
[3766]	1114	IF ( biometeorology ) CALL bio_header ( io )
	1115	IF ( bulk_cloud_model ) CALL bcm_header( io )
	1116	IF ( air_chemistry ) CALL chem_header ( io )
	1117	IF ( virtual_flight ) CALL flight_header( io )
	1118	IF ( gust_module_enabled ) CALL gust_header( io )
[4047]	1119	IF ( particle_advection ) CALL lpm_header( io )
[3766]	1120	IF ( land_surface ) CALL lsm_header( io )
	1121	IF ( large_scale_forcing ) CALL lsf_nudging_header( io )
	1122	IF ( nesting_offline ) CALL nesting_offl_header( io )
	1123	IF ( ocean_mode ) CALL ocean_header( io )
	1124	IF ( plant_canopy ) CALL pcm_header( io )
	1125	IF ( radiation ) CALL radiation_header( io )
	1126	IF ( salsa ) CALL salsa_header( io )
	1127	IF ( calculate_spectra ) CALL spectra_header( io )
	1128	IF ( syn_turb_gen ) CALL stg_header( io )
[4047]	1129
[3766]	1130	IF ( user_module_enabled ) CALL user_header( io )
[3637]	1131
[3987]	1132	IF ( debug_output ) CALL debug_message( 'module-specific header output', 'end' )
[3637]	1133
[3987]	1134
[3766]	1135	END SUBROUTINE module_interface_header
[3637]	1136
	1137
	1138	!------------------------------------------------------------------------------!
	1139	! Description:
	1140	! ------------
[3874]	1141	!> Perform module-specific actions while in time-integration (vector-optimized)
[3637]	1142	!------------------------------------------------------------------------------!
[3766]	1143	SUBROUTINE module_interface_actions( location )
[3637]	1144
	1145
[3766]	1146	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
[3637]	1147
[4047]	1148	CALL dynamics_actions( location )
[4048]	1149	CALL tcm_actions( location )
[3637]	1150
[3870]	1151	IF ( bulk_cloud_model ) CALL bcm_actions( location )
[3877]	1152	IF ( air_chemistry ) CALL chem_actions( location )
[3766]	1153	IF ( gust_module_enabled ) CALL gust_actions( location )
[4047]	1154	IF ( particle_advection ) CALL lpm_actions( location )
[3873]	1155	IF ( ocean_mode ) CALL ocean_actions( location )
[3871]	1156	IF ( salsa ) CALL salsa_actions( location )
[3875]	1157	IF ( wind_turbine ) CALL wtm_actions( location )
[4047]	1158
[3766]	1159	IF ( user_module_enabled ) CALL user_actions( location )
[4173]	1160	IF ( vdi_checks ) CALL vdi_actions( location )
[3684]	1161
	1162
[3766]	1163	END SUBROUTINE module_interface_actions
[3637]	1164
	1165
	1166	!------------------------------------------------------------------------------!
	1167	! Description:
	1168	! ------------
[3874]	1169	!> Perform module-specific actions while in time-integration (cache-optimized)
[3637]	1170	!------------------------------------------------------------------------------!
[3766]	1171	SUBROUTINE module_interface_actions_ij( i, j, location )
[3637]	1172
	1173
[3766]	1174	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1175	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1176	CHARACTER (LEN=*), INTENT(IN) :: location !< call location string
[3637]	1177
[4047]	1178	CALL dynamics_actions( i, j, location )
[4048]	1179	CALL tcm_actions( i, j, location )
[3637]	1180
[3870]	1181	IF ( bulk_cloud_model ) CALL bcm_actions( i, j, location )
[3877]	1182	IF ( air_chemistry ) CALL chem_actions( i, j, location )
[3766]	1183	IF ( gust_module_enabled ) CALL gust_actions( i, j, location )
[3873]	1184	IF ( ocean_mode ) CALL ocean_actions( i, j, location )
[3871]	1185	IF ( salsa ) CALL salsa_actions( i, j, location )
[3875]	1186	IF ( wind_turbine ) CALL wtm_actions( i, j, location )
[4047]	1187
[3766]	1188	IF ( user_module_enabled ) CALL user_actions( i, j, location )
[3684]	1189
	1190
[3766]	1191	END SUBROUTINE module_interface_actions_ij
[3637]	1192
	1193
	1194	!------------------------------------------------------------------------------!
	1195	! Description:
	1196	! ------------
[3987]	1197	!> Compute module-specific non_advective_processes (vector-optimized)
[3874]	1198	!------------------------------------------------------------------------------!
[4047]	1199	SUBROUTINE module_interface_non_advective_processes
[3874]	1200
	1201
[4047]	1202	CALL dynamics_non_advective_processes
[3874]	1203
[4047]	1204	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes
	1205	IF ( air_chemistry ) CALL chem_non_advective_processes
	1206	IF ( salsa ) CALL salsa_non_advective_processes
[3874]	1207
[4047]	1208
[3931]	1209	END SUBROUTINE module_interface_non_advective_processes
[3874]	1210
	1211
	1212	!------------------------------------------------------------------------------!
	1213	! Description:
	1214	! ------------
[3931]	1215	!> Compute module-specific non_advective_processes (cache-optimized)
[3837]	1216	!------------------------------------------------------------------------------!
[3931]	1217	SUBROUTINE module_interface_non_advective_processes_ij( i, j )
[3874]	1218
	1219
	1220	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1221	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1222
[4047]	1223	CALL dynamics_non_advective_processes( i, j )
[3874]	1224
[3956]	1225	IF ( bulk_cloud_model ) CALL bcm_non_advective_processes( i, j )
[3930]	1226	IF ( air_chemistry ) CALL chem_non_advective_processes( i, j )
[3956]	1227	IF ( salsa ) CALL salsa_non_advective_processes( i, j )
[3874]	1228
	1229
[3931]	1230	END SUBROUTINE module_interface_non_advective_processes_ij
[4047]	1231
[3887]	1232	!------------------------------------------------------------------------------!
	1233	! Description:
	1234	! ------------
[4047]	1235	!> Exchange horiz for module-specific quantities
[3887]	1236	!------------------------------------------------------------------------------!
[4047]	1237	SUBROUTINE module_interface_exchange_horiz
[3874]	1238
	1239
[3987]	1240	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'start' )
	1241
[4047]	1242	CALL dynamics_exchange_horiz
[3887]	1243
[4047]	1244	IF ( bulk_cloud_model ) CALL bcm_exchange_horiz
	1245	IF ( air_chemistry ) CALL chem_exchange_horiz_bounds
	1246	IF ( salsa ) CALL salsa_exchange_horiz_bounds
	1247
[3987]	1248	IF ( debug_output_timestep ) CALL debug_message( 'module-specific exchange_horiz', 'end' )
	1249
	1250
[3887]	1251	END SUBROUTINE module_interface_exchange_horiz
	1252
	1253
[3874]	1254	!------------------------------------------------------------------------------!
	1255	! Description:
	1256	! ------------
	1257	!> Compute module-specific prognostic_equations (vector-optimized)
	1258	!------------------------------------------------------------------------------!
[4047]	1259	SUBROUTINE module_interface_prognostic_equations
[3837]	1260
	1261
[4047]	1262	CALL dynamics_prognostic_equations
[4048]	1263	CALL tcm_prognostic_equations
[3837]	1264
[4047]	1265	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations
	1266	IF ( air_chemistry ) CALL chem_prognostic_equations
	1267	IF ( gust_module_enabled ) CALL gust_prognostic_equations
	1268	IF ( ocean_mode ) CALL ocean_prognostic_equations
	1269	IF ( salsa ) CALL salsa_prognostic_equations
[3837]	1270
[4047]	1271
[3837]	1272	END SUBROUTINE module_interface_prognostic_equations
	1273
	1274
	1275	!------------------------------------------------------------------------------!
	1276	! Description:
	1277	! ------------
[3874]	1278	!> Compute module-specific prognostic_equations (cache-optimized)
[3837]	1279	!------------------------------------------------------------------------------!
	1280	SUBROUTINE module_interface_prognostic_equations_ij( i, j, i_omp_start, tn )
	1281
	1282
	1283	INTEGER(iwp), INTENT(IN) :: i !< grid index in x-direction
	1284	INTEGER(iwp), INTENT(IN) :: j !< grid index in y-direction
	1285	INTEGER(iwp), INTENT(IN) :: i_omp_start !< first loop index of i-loop in prognostic_equations
	1286	INTEGER(iwp), INTENT(IN) :: tn !< task number of openmp task
	1287
[4047]	1288	CALL dynamics_prognostic_equations( i, j, i_omp_start, tn )
[4048]	1289	CALL tcm_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1290
[3870]	1291	IF ( bulk_cloud_model ) CALL bcm_prognostic_equations( i, j, i_omp_start, tn )
[3880]	1292	IF ( air_chemistry ) CALL chem_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1293	IF ( gust_module_enabled ) CALL gust_prognostic_equations( i, j, i_omp_start, tn )
[3840]	1294	IF ( ocean_mode ) CALL ocean_prognostic_equations( i, j, i_omp_start, tn )
[3864]	1295	IF ( salsa ) CALL salsa_prognostic_equations( i, j, i_omp_start, tn )
[3837]	1296
	1297
	1298	END SUBROUTINE module_interface_prognostic_equations_ij
	1299
[4268]	1300	!------------------------------------------------------------------------------!
	1301	! Description:
	1302	! ------------
	1303	!> Compute module-specific boundary conditions
	1304	!------------------------------------------------------------------------------!
	1305	SUBROUTINE module_interface_boundary_conditions
[3837]	1306
[4268]	1307
	1308	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'start' )
	1309
[4281]	1310	CALL dynamics_boundary_conditions
	1311	CALL tcm_boundary_conds
	1312
[4268]	1313	IF ( bulk_cloud_model ) CALL bcm_boundary_conditions
	1314	IF ( air_chemistry ) CALL chem_boundary_conditions
[4272]	1315	IF ( ocean_mode ) CALL ocean_boundary_conditions
[4268]	1316	IF ( salsa ) CALL salsa_boundary_conditions
	1317
	1318	IF ( debug_output_timestep ) CALL debug_message( 'module-specific boundary_conditions', 'end' )
	1319
	1320
	1321	END SUBROUTINE module_interface_boundary_conditions
	1322
[3837]	1323	!------------------------------------------------------------------------------!
	1324	! Description:
	1325	! ------------
[3637]	1326	!> Swap the timelevel pointers for module-specific arrays
	1327	!------------------------------------------------------------------------------!
[3766]	1328	SUBROUTINE module_interface_swap_timelevel ( swap_mode )
[3637]	1329
	1330
[3766]	1331	INTEGER(iwp), INTENT(IN) :: swap_mode !< determines procedure of pointer swap
[3637]	1332
[3987]	1333
	1334	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'start' )
	1335
[4047]	1336	CALL dynamics_swap_timelevel( swap_mode )
	1337	CALL tcm_swap_timelevel( swap_mode )
	1338
[3766]	1339	IF ( bulk_cloud_model ) CALL bcm_swap_timelevel( swap_mode )
	1340	IF ( air_chemistry ) CALL chem_swap_timelevel( swap_mode )
	1341	IF ( gust_module_enabled ) CALL gust_swap_timelevel( swap_mode )
	1342	IF ( land_surface ) CALL lsm_swap_timelevel( swap_mode )
	1343	IF ( ocean_mode ) CALL ocean_swap_timelevel( swap_mode )
	1344	IF ( salsa ) CALL salsa_swap_timelevel( swap_mode )
	1345	IF ( urban_surface ) CALL usm_swap_timelevel( swap_mode )
[3637]	1346
[3987]	1347	IF ( debug_output_timestep ) CALL debug_message( 'module-specific swap timelevel', 'end' )
[3637]	1348
[3987]	1349
[3766]	1350	END SUBROUTINE module_interface_swap_timelevel
[3637]	1351
	1352
	1353	!------------------------------------------------------------------------------!
	1354	!
	1355	! Description:
	1356	! ------------
	1357	!> Perform module-specific averaging of 3D data
	1358	!------------------------------------------------------------------------------!
[3766]	1359	SUBROUTINE module_interface_3d_data_averaging( mode, variable )
[3637]	1360
	1361
[3766]	1362	CHARACTER (LEN=*), INTENT(IN) :: mode !< averaging interface mode
	1363	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
[3637]	1364
[3987]	1365
	1366	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'start' )
	1367
[4047]	1368	CALL dynamics_3d_data_averaging( mode, variable )
[4048]	1369	CALL tcm_3d_data_averaging( mode, variable )
[4047]	1370
[3766]	1371	IF ( biometeorology ) CALL bio_3d_data_averaging( mode, variable )
	1372	IF ( bulk_cloud_model ) CALL bcm_3d_data_averaging( mode, variable )
	1373	IF ( air_chemistry ) CALL chem_3d_data_averaging( mode, variable )
[4047]	1374	CALL doq_3d_data_averaging( mode, variable ) ! ToDo: this seems to be not according to the design
[3766]	1375	IF ( gust_module_enabled ) CALL gust_3d_data_averaging( mode, variable )
	1376	IF ( land_surface ) CALL lsm_3d_data_averaging( mode, variable )
	1377	IF ( ocean_mode ) CALL ocean_3d_data_averaging( mode, variable )
[4127]	1378	IF ( plant_canopy ) CALL pcm_3d_data_averaging( mode, variable )
[3766]	1379	IF ( radiation ) CALL radiation_3d_data_averaging( mode, variable )
	1380	IF ( salsa ) CALL salsa_3d_data_averaging( mode, variable )
	1381	IF ( urban_surface ) CALL usm_3d_data_averaging( mode, variable )
[4047]	1382
[3766]	1383	IF ( user_module_enabled ) CALL user_3d_data_averaging( mode, variable )
[3637]	1384
[3987]	1385	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data averaging', 'end' )
[3637]	1386
[3987]	1387
[3766]	1388	END SUBROUTINE module_interface_3d_data_averaging
[3637]	1389
	1390	!------------------------------------------------------------------------------!
	1391	!
	1392	! Description:
	1393	! ------------
	1394	!> Define module-specific 2D output variables
	1395	!------------------------------------------------------------------------------!
[3766]	1396	SUBROUTINE module_interface_data_output_2d( av, variable, found, grid, mode, &
	1397	local_pf, two_d, nzb_do, nzt_do, &
	1398	fill_value )
[3637]	1399
[3766]	1400	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
	1401	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	1402	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
	1403	CHARACTER (LEN=*), INTENT(INOUT) :: grid !< name of vertical grid
	1404	CHARACTER (LEN=*), INTENT(IN) :: mode !< either 'xy', 'xz' or 'yz'
	1405	LOGICAL, INTENT(OUT) :: two_d !< flag for 2D variables
	1406	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
	1407	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
	1408	REAL(wp), INTENT(IN) :: fill_value !< to be removed
[3637]	1409
[4004]	1410	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf !< ToDo: can also be kind=sp
[3637]	1411
	1412
[3987]	1413	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'start' )
	1414
[4047]	1415	CALL dynamics_data_output_2d( &
	1416	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1417	)
	1418
[4048]	1419	IF ( .NOT. found ) THEN
	1420	CALL tcm_data_output_2d( &
	1421	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
	1422	)
	1423	ENDIF
	1424
[3766]	1425	IF ( .NOT. found .AND. biometeorology ) THEN
	1426	CALL bio_data_output_2d( &
	1427	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
	1428	)
	1429	ENDIF
[3637]	1430
[3766]	1431	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
	1432	CALL bcm_data_output_2d( &
	1433	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1434	)
	1435	ENDIF
[3637]	1436
[3766]	1437	IF ( .NOT. found .AND. air_chemistry ) THEN
	1438	CALL chem_data_output_2d( &
	1439	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1440	)
	1441	ENDIF
[4047]	1442
[4039]	1443	IF ( .NOT. found ) THEN
	1444	CALL doq_output_2d( &
	1445	av, variable, found, grid, mode, local_pf, two_d, &
	1446	nzb_do, nzt_do, fill_value )
	1447	ENDIF
[3637]	1448
[3766]	1449	IF ( .NOT. found .AND. gust_module_enabled ) THEN
	1450	CALL gust_data_output_2d( &
	1451	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do, fill_value &
	1452	)
	1453	ENDIF
[3637]	1454
[3766]	1455	IF ( .NOT. found .AND. land_surface ) THEN
	1456	CALL lsm_data_output_2d( &
	1457	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1458	)
	1459	ENDIF
[3637]	1460
[3766]	1461	IF ( .NOT. found .AND. ocean_mode ) THEN
	1462	CALL ocean_data_output_2d( &
	1463	av, variable, found, grid, mode, local_pf, nzb_do, nzt_do &
	1464	)
	1465	ENDIF
[3637]	1466
[4008]	1467	IF ( .NOT. found .AND. radiation ) THEN
	1468	CALL radiation_data_output_2d( &
[3766]	1469	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1470	)
	1471	ENDIF
[3637]	1472
[4008]	1473	IF ( .NOT. found .AND. salsa ) THEN
	1474	CALL salsa_data_output_2d( &
[3766]	1475	av, variable, found, grid, mode, local_pf, two_d, nzb_do, nzt_do&
	1476	)
	1477	ENDIF
[3637]	1478
[3766]	1479	IF ( .NOT. found .AND. user_module_enabled ) THEN
	1480	CALL user_data_output_2d( &
	1481	av, variable, found, grid, local_pf, two_d, nzb_do, nzt_do &
	1482	)
	1483	ENDIF
[3637]	1484
[3987]	1485	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 2d data output', 'end' )
	1486
	1487
[3766]	1488	END SUBROUTINE module_interface_data_output_2d
[3637]	1489
	1490
	1491	!------------------------------------------------------------------------------!
	1492	!
	1493	! Description:
	1494	! ------------
	1495	!> Define module-specific 3D output variables
	1496	!------------------------------------------------------------------------------!
[3766]	1497	SUBROUTINE module_interface_data_output_3d( av, variable, found, local_pf, &
	1498	fill_value, resorted, nzb_do, nzt_do )
[3637]	1499
	1500
[3766]	1501	INTEGER(iwp), INTENT(IN) :: av !< flag for (non-)average output
	1502	CHARACTER (LEN=*), INTENT(IN) :: variable !< variable name
	1503	LOGICAL, INTENT(INOUT) :: found !< flag if output variable is found
	1504	REAL(wp), INTENT(IN) :: fill_value !< ToDo: refactor
	1505	LOGICAL, INTENT(OUT) :: resorted !< flag if output has been resorted
	1506	INTEGER(iwp), INTENT(IN) :: nzb_do !< vertical output index (bottom) (usually 0)
	1507	INTEGER(iwp), INTENT(IN) :: nzt_do !< vertical output index (top) (usually nz_do3d)
[3637]	1508
[4004]	1509	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do), INTENT(INOUT) :: local_pf
[3637]	1510
	1511
[3987]	1512	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'start' )
	1513
[4047]	1514	CALL dynamics_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1515	resorted = .FALSE.
	1516
[4048]	1517	IF ( .NOT. found ) THEN
	1518	CALL tcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1519	resorted = .TRUE.
	1520	ENDIF
	1521
[3766]	1522	IF ( .NOT. found .AND. biometeorology ) THEN
	1523	CALL bio_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1524	resorted = .FALSE.
	1525	ENDIF
[3637]	1526
[3766]	1527	IF ( .NOT. found .AND. bulk_cloud_model ) THEN
	1528	CALL bcm_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1529	resorted = .TRUE.
	1530	ENDIF
[3637]	1531
[3766]	1532	IF ( .NOT. found .AND. air_chemistry ) THEN
	1533	CALL chem_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1534	resorted = .TRUE.
	1535	ENDIF
[4047]	1536
[4039]	1537	IF ( .NOT. found ) THEN
	1538	CALL doq_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1539	resorted = .TRUE.
	1540	ENDIF
[4047]	1541
[3766]	1542	IF ( .NOT. found .AND. gust_module_enabled ) THEN
	1543	CALL gust_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1544	resorted = .TRUE.
	1545	ENDIF
[4047]	1546
[3766]	1547	IF ( .NOT. found .AND. indoor_model ) THEN
	1548	CALL im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1549	resorted = .TRUE.
	1550	ENDIF
[3637]	1551
[3766]	1552	IF ( .NOT. found .AND. ocean_mode ) THEN
	1553	CALL ocean_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1554	resorted = .TRUE.
	1555	ENDIF
[3637]	1556
[3766]	1557	IF ( .NOT. found .AND. plant_canopy ) THEN
	1558	CALL pcm_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
	1559	resorted = .TRUE.
	1560	ENDIF
[3637]	1561
[4008]	1562	IF ( .NOT. found .AND. radiation ) THEN
	1563	CALL radiation_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
[3766]	1564	resorted = .TRUE.
	1565	ENDIF
[3637]	1566
[4008]	1567	IF ( .NOT. found .AND. salsa ) THEN
	1568	CALL salsa_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
[3766]	1569	resorted = .TRUE.
	1570	ENDIF
[3637]	1571
[3766]	1572	IF ( .NOT. found .AND. user_module_enabled ) THEN
	1573	CALL user_data_output_3d( av, variable, found, local_pf, nzb_do, nzt_do )
	1574	resorted = .TRUE.
	1575	ENDIF
[3637]	1576
[3987]	1577	IF ( debug_output_timestep ) CALL debug_message( 'module-specific 3d data output', 'end' )
[3637]	1578
[3987]	1579
[3766]	1580	END SUBROUTINE module_interface_data_output_3d
[3637]	1581
	1582
	1583	!------------------------------------------------------------------------------!
	1584	! Description:
	1585	! ------------
	1586	!> Compute module-specific profile and timeseries data
	1587	!------------------------------------------------------------------------------!
[3766]	1588	SUBROUTINE module_interface_statistics( mode, sr, tn, dots_max )
[3637]	1589
	1590
[3766]	1591	CHARACTER (LEN=*), INTENT(IN) :: mode !< statistical analysis mode
	1592	INTEGER(iwp), INTENT(IN) :: sr !<
	1593	INTEGER(iwp), INTENT(IN) :: tn !<
	1594	INTEGER(iwp), INTENT(IN) :: dots_max !< maximum number of timeseries
[3637]	1595
[3987]	1596
	1597	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'start' )
	1598
[4047]	1599	CALL dynamics_statistics( mode, sr, tn )
	1600
[3766]	1601	IF ( gust_module_enabled ) CALL gust_statistics( mode, sr, tn, dots_max )
	1602	IF ( air_chemistry ) CALL chem_statistics( mode, sr, tn )
[4131]	1603	IF ( salsa ) CALL salsa_statistics( mode, sr, tn )
[4047]	1604
[3766]	1605	IF ( user_module_enabled ) CALL user_statistics( mode, sr, tn )
[3637]	1606
[3987]	1607	IF ( debug_output_timestep ) CALL debug_message( 'module-specific statistics', 'end' )
[3637]	1608
[3987]	1609
[3766]	1610	END SUBROUTINE module_interface_statistics
[3637]	1611
	1612
	1613	!------------------------------------------------------------------------------!
	1614	! Description:
	1615	! ------------
	1616	!> Read module-specific restart data globaly shared by all MPI ranks
	1617	!------------------------------------------------------------------------------!
[3766]	1618	SUBROUTINE module_interface_rrd_global( found )
[3637]	1619
	1620
[3806]	1621	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
[3637]	1622
[3987]	1623
	1624	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'start' )
	1625
[4047]	1626	CALL dynamics_rrd_global( found ) ! ToDo: change interface to pass variable
	1627
[3766]	1628	IF ( .NOT. found ) CALL bio_rrd_global( found ) ! ToDo: change interface to pass variable
	1629	IF ( .NOT. found ) CALL bcm_rrd_global( found ) ! ToDo: change interface to pass variable
	1630	IF ( .NOT. found ) CALL flight_rrd_global( found ) ! ToDo: change interface to pass variable
	1631	IF ( .NOT. found ) CALL gust_rrd_global( found ) ! ToDo: change interface to pass variable
[4047]	1632	IF ( .NOT. found ) CALL lpm_rrd_global( found ) ! ToDo: change interface to pass variable
[3766]	1633	IF ( .NOT. found ) CALL ocean_rrd_global( found ) ! ToDo: change interface to pass variable
	1634	IF ( .NOT. found ) CALL stg_rrd_global ( found ) ! ToDo: change interface to pass variable
	1635	IF ( .NOT. found ) CALL wtm_rrd_global( found ) ! ToDo: change interface to pass variable
	1636	IF ( .NOT. found ) CALL surface_data_output_rrd_global( found )
[4047]	1637
[3766]	1638	IF ( .NOT. found ) CALL user_rrd_global( found ) ! ToDo: change interface to pass variable
[3637]	1639
[3987]	1640	IF ( debug_output ) CALL debug_message( 'module-specific read global restart data', 'end' )
[3637]	1641
[3987]	1642
[3766]	1643	END SUBROUTINE module_interface_rrd_global
[3637]	1644
	1645
	1646	!------------------------------------------------------------------------------!
	1647	! Description:
	1648	! ------------
	1649	!> Write module-specific restart data globaly shared by all MPI ranks
	1650	!------------------------------------------------------------------------------!
[3766]	1651	SUBROUTINE module_interface_wrd_global
[3637]	1652
	1653
[3987]	1654	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'start' )
	1655
[4047]	1656	CALL dynamics_wrd_global
	1657
[3766]	1658	IF ( biometeorology ) CALL bio_wrd_global
	1659	IF ( bulk_cloud_model ) CALL bcm_wrd_global
	1660	IF ( virtual_flight ) CALL flight_wrd_global
	1661	IF ( gust_module_enabled ) CALL gust_wrd_global
	1662	IF ( ocean_mode ) CALL ocean_wrd_global
	1663	IF ( syn_turb_gen ) CALL stg_wrd_global
	1664	IF ( wind_turbine ) CALL wtm_wrd_global
	1665	IF ( surface_output ) CALL surface_data_output_wrd_global
[4047]	1666
[3766]	1667	IF ( user_module_enabled ) CALL user_wrd_global
[3637]	1668
[3987]	1669	IF ( debug_output ) CALL debug_message( 'module-specific write global restart data', 'end' )
[3637]	1670
[3987]	1671
[3766]	1672	END SUBROUTINE module_interface_wrd_global
[3637]	1673
	1674
	1675	!------------------------------------------------------------------------------!
	1676	! Description:
	1677	! ------------
	1678	!> Read module-specific restart data specific to local MPI ranks
	1679	!------------------------------------------------------------------------------!
[3767]	1680	SUBROUTINE module_interface_rrd_local( map_index, &
[3766]	1681	nxlf, nxlc, nxl_on_file, &
	1682	nxrf, nxrc, nxr_on_file, &
	1683	nynf, nync, nyn_on_file, &
	1684	nysf, nysc, nys_on_file, &
	1685	tmp_2d, tmp_3d, found )
[3637]	1686
	1687
[3806]	1688	INTEGER(iwp), INTENT(IN) :: map_index !<
	1689	INTEGER(iwp), INTENT(IN) :: nxlc !<
	1690	INTEGER(iwp), INTENT(IN) :: nxlf !<
	1691	INTEGER(iwp), INTENT(IN) :: nxl_on_file !<
	1692	INTEGER(iwp), INTENT(IN) :: nxrc !<
	1693	INTEGER(iwp), INTENT(IN) :: nxrf !<
	1694	INTEGER(iwp), INTENT(IN) :: nxr_on_file !<
	1695	INTEGER(iwp), INTENT(IN) :: nync !<
	1696	INTEGER(iwp), INTENT(IN) :: nynf !<
	1697	INTEGER(iwp), INTENT(IN) :: nyn_on_file !<
	1698	INTEGER(iwp), INTENT(IN) :: nysc !<
	1699	INTEGER(iwp), INTENT(IN) :: nysf !<
	1700	INTEGER(iwp), INTENT(IN) :: nys_on_file !<
	1701	LOGICAL, INTENT(INOUT) :: found !< flag if variable was found
[3637]	1702
[4039]	1703	REAL(wp), &
	1704	DIMENSION(nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
	1705	INTENT(OUT) :: tmp_2d !<
	1706	REAL(wp), &
	1707	DIMENSION(nzb:nzt+1,nys_on_file-nbgp:nyn_on_file+nbgp,nxl_on_file-nbgp:nxr_on_file+nbgp), &
	1708	INTENT(OUT) :: tmp_3d !<
[3637]	1709
	1710
[3987]	1711	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'start' )
	1712
[4047]	1713	CALL dynamics_rrd_local( &
	1714	map_index, &
	1715	nxlf, nxlc, nxl_on_file, &
	1716	nxrf, nxrc, nxr_on_file, &
	1717	nynf, nync, nyn_on_file, &
	1718	nysf, nysc, nys_on_file, &
	1719	tmp_2d, tmp_3d, found &
	1720	) ! ToDo: change interface to pass variable
	1721
[4039]	1722	IF ( .NOT. found ) CALL bio_rrd_local( &
[3766]	1723	found &
	1724	)
[3650]	1725
[4039]	1726	IF ( .NOT. found ) CALL bcm_rrd_local( &
[3767]	1727	map_index, &
[3766]	1728	nxlf, nxlc, nxl_on_file, &
	1729	nxrf, nxrc, nxr_on_file, &
	1730	nynf, nync, nyn_on_file, &
	1731	nysf, nysc, nys_on_file, &
	1732	tmp_2d, tmp_3d, found &
	1733	) ! ToDo: change interface to pass variable
[3637]	1734
[4039]	1735	IF ( .NOT. found ) CALL chem_rrd_local( &
[3767]	1736	map_index, &
[3766]	1737	nxlf, nxlc, nxl_on_file, &
	1738	nxrf, nxrc, nxr_on_file, &
	1739	nynf, nync, nyn_on_file, &
	1740	nysf, nysc, nys_on_file, &
	1741	tmp_3d, found &
	1742	) ! ToDo: change interface to pass variable
[4047]	1743
[4039]	1744	! IF ( .NOT. found ) CALL doq_rrd_local( &
	1745	! map_index, &
	1746	! nxlf, nxlc, nxl_on_file, &
	1747	! nxrf, nxrc, nxr_on_file, &
	1748	! nynf, nync, nyn_on_file, &
	1749	! nysf, nysc, nys_on_file, &
	1750	! tmp_3d_non_standard, found &
	1751	! ) ! ToDo: change interface to pass variable CALL doq_wrd_local
[3637]	1752
[4039]	1753	IF ( .NOT. found ) CALL gust_rrd_local( &
[3767]	1754	map_index, &
[3766]	1755	nxlf, nxlc, nxl_on_file, &
	1756	nxrf, nxrc, nxr_on_file, &
	1757	nynf, nync, nyn_on_file, &
	1758	nysf, nysc, nys_on_file, &
	1759	tmp_2d, tmp_3d, found &
	1760	) ! ToDo: change interface to pass variable
[3637]	1761
[4039]	1762	IF ( .NOT. found ) CALL lpm_rrd_local( &
[4017]	1763	map_index, &
	1764	nxlf, nxlc, nxl_on_file, &
	1765	nxrf, nxrc, nxr_on_file, &
	1766	nynf, nync, nyn_on_file, &
	1767	nysf, nysc, nys_on_file, &
	1768	tmp_3d, found &
	1769	) ! ToDo: change interface to pass variable
	1770
[4039]	1771	IF ( .NOT. found ) CALL lsm_rrd_local( &
[3767]	1772	map_index, &
[3766]	1773	nxlf, nxlc, nxl_on_file, &
	1774	nxrf, nxrc, nxr_on_file, &
	1775	nynf, nync, nyn_on_file, &
	1776	nysf, nysc, nys_on_file, &
	1777	tmp_2d, found &
	1778	) ! ToDo: change interface to pass variable
[3637]	1779
[4039]	1780	IF ( .NOT. found ) CALL ocean_rrd_local( &
[3767]	1781	map_index, &
[3766]	1782	nxlf, nxlc, nxl_on_file, &
	1783	nxrf, nxrc, nxr_on_file, &
	1784	nynf, nync, nyn_on_file, &
	1785	nysf, nysc, nys_on_file, &
[3767]	1786	tmp_3d, found &
[3766]	1787	) ! ToDo: change interface to pass variable
[3637]	1788
[4039]	1789	IF ( .NOT. found ) CALL radiation_rrd_local( &
[3767]	1790	map_index, &
[3766]	1791	nxlf, nxlc, nxl_on_file, &
	1792	nxrf, nxrc, nxr_on_file, &
	1793	nynf, nync, nyn_on_file, &
	1794	nysf, nysc, nys_on_file, &
	1795	tmp_2d, tmp_3d, found &
	1796	) ! ToDo: change interface to pass variable
[3637]	1797
[4039]	1798	IF ( .NOT. found ) CALL salsa_rrd_local( &
[3767]	1799	map_index, &
[3766]	1800	nxlf, nxlc, nxl_on_file, &
	1801	nxrf, nxrc, nxr_on_file, &
	1802	nynf, nync, nyn_on_file, &
	1803	nysf, nysc, nys_on_file, &
	1804	tmp_3d, found &
	1805	) ! ToDo: change interface to pass variable
[3637]	1806
[4039]	1807	IF ( .NOT. found ) CALL usm_rrd_local( &
[3767]	1808	map_index, &
[3766]	1809	nxlf, nxlc, nxl_on_file, &
[3767]	1810	nxrf, nxr_on_file, &
	1811	nynf, nyn_on_file, &
[3766]	1812	nysf, nysc, nys_on_file, &
	1813	found &
	1814	) ! ToDo: change interface to pass variable
[3762]	1815	!
[3766]	1816	!-- Surface data do not need overlap data, so do not pass these information.
[4039]	1817	IF ( .NOT. found ) CALL surface_data_output_rrd_local( found )
[4047]	1818
[4039]	1819	IF ( .NOT. found ) CALL user_rrd_local( &
[3767]	1820	map_index, &
[3766]	1821	nxlf, nxlc, nxl_on_file, &
	1822	nxrf, nxrc, nxr_on_file, &
	1823	nynf, nync, nyn_on_file, &
	1824	nysf, nysc, nys_on_file, &
	1825	tmp_3d, found &
	1826	) ! ToDo: change interface to pass variable
[3637]	1827
[3987]	1828	IF ( debug_output ) CALL debug_message( 'module-specific read local restart data', 'end' )
[3637]	1829
[3987]	1830
[3766]	1831	END SUBROUTINE module_interface_rrd_local
[3637]	1832
	1833
	1834	!------------------------------------------------------------------------------!
	1835	! Description:
	1836	! ------------
	1837	!> Write module-specific restart data specific to local MPI ranks
	1838	!------------------------------------------------------------------------------!
[3766]	1839	SUBROUTINE module_interface_wrd_local
[3637]	1840
	1841
[3987]	1842	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'start' )
	1843
[4047]	1844	CALL dynamics_wrd_local
	1845
[3766]	1846	IF ( biometeorology ) CALL bio_wrd_local
	1847	IF ( bulk_cloud_model ) CALL bcm_wrd_local
	1848	IF ( air_chemistry ) CALL chem_wrd_local
[4039]	1849	CALL doq_wrd_local
[3766]	1850	IF ( gust_module_enabled ) CALL gust_wrd_local
[4047]	1851	IF ( particle_advection ) CALL lpm_wrd_local
[3766]	1852	IF ( land_surface ) CALL lsm_wrd_local
	1853	IF ( ocean_mode ) CALL ocean_wrd_local
	1854	IF ( radiation ) CALL radiation_wrd_local
	1855	IF ( salsa ) CALL salsa_wrd_local
	1856	IF ( urban_surface ) CALL usm_wrd_local
	1857	IF ( surface_output ) CALL surface_data_output_wrd_local
[4047]	1858
[3766]	1859	IF ( user_module_enabled ) CALL user_wrd_local
[3637]	1860
[3987]	1861	IF ( debug_output ) CALL debug_message( 'module-specific write local restart data', 'end' )
[3637]	1862
[3987]	1863
[3766]	1864	END SUBROUTINE module_interface_wrd_local
[3637]	1865
	1866
[3687]	1867	!------------------------------------------------------------------------------!
	1868	! Description:
	1869	! ------------
	1870	!> Perform module-specific last actions before the program terminates
	1871	!------------------------------------------------------------------------------!
[3766]	1872	SUBROUTINE module_interface_last_actions
[3687]	1873
	1874
[3987]	1875	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'start' )
	1876
[4047]	1877	CALL dynamics_last_actions
	1878
[3766]	1879	IF ( virtual_measurement ) CALL vm_last_actions
[4047]	1880
[3766]	1881	IF ( user_module_enabled ) CALL user_last_actions
[3687]	1882
[3987]	1883	IF ( debug_output ) CALL debug_message( 'module-specific last actions', 'end' )
[3687]	1884
[3987]	1885
[3766]	1886	END SUBROUTINE module_interface_last_actions
[3687]	1887
[3766]	1888
	1889	END MODULE module_interface

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |