Home

Context Navigation

source: palm/trunk/SOURCE/init_masks.f90 @ 1350

Last change on this file since 1350 was 1325, checked in by suehring, 11 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 26.2 KB

Rev	Line
[298]	1	SUBROUTINE init_masks
	2
[1036]	3	!--------------------------------------------------------------------------------!
	4	! This file is part of PALM.
	5	!
	6	! PALM is free software: you can redistribute it and/or modify it under the terms
	7	! of the GNU General Public License as published by the Free Software Foundation,
	8	! either version 3 of the License, or (at your option) any later version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[1310]	17	! Copyright 1997-2014 Leibniz Universitaet Hannover
[1036]	18	!--------------------------------------------------------------------------------!
	19	!
[484]	20	! Current revisions:
[298]	21	! -----------------
[1321]	22	!
	23	! Former revisions:
	24	! -----------------
	25	! $Id: init_masks.f90 1325 2014-03-21 09:21:15Z maronga $
	26	!
[1325]	27	! 1324 2014-03-21 09:13:16Z suehring
	28	! Bugfix: ONLY statement for module netcdf_control removed
	29	!
[1321]	30	! 1320 2014-03-20 08:40:49Z raasch
[1320]	31	! ONLY-attribute added to USE-statements,
	32	! kind-parameters added to all INTEGER and REAL declaration statements,
	33	! kinds are defined in new module kinds,
	34	! revision history before 2012 removed,
	35	! comment fields (!:) to be used for variable explanations added to
	36	! all variable declaration statements
[298]	37	!
[1187]	38	! 1186 2013-06-18 06:22:52Z raasch
	39	! bugfix: 0.0 replaced by zu(nzb) as the lowest default height level for masks,
	40	! because a zero value does not work in case of ocean runs
	41	!
[1037]	42	! 1036 2012-10-22 13:43:42Z raasch
	43	! code put under GPL (PALM 3.9)
	44	!
[1033]	45	! 1032 2012-10-21 13:03:21Z letzel
	46	! mask locations determined based on scalar positions
	47	!
[1035]	48	! 1031 2012-10-19 14:35:30Z raasch
	49	! netCDF4 without parallel file support implemented
	50	!
[997]	51	! 996 2012-09-07 10:41:47Z raasch
	52	! little reformatting
	53	!
[979]	54	! 978 2012-08-09 08:28:32Z fricke
	55	! +z0h*
	56	!
[810]	57	! 809 2012-01-30 13:32:58Z maronga
	58	! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives
	59	!
[808]	60	! 807 2012-01-25 11:53:51Z maronga
	61	! New cpp directive "__check" implemented which is used by check_namelist_files
	62	!
[449]	63	! 410 2009-12-04 17:05:40Z letzel
	64	! Initial revision
[298]	65	!
[449]	66	!
[298]	67	! Description:
	68	! ------------
	69	! Initialize masked data output
	70	!------------------------------------------------------------------------------!
	71
[1320]	72	USE arrays_3d, &
	73	ONLY: zu, zw
	74
	75	USE control_parameters, &
	76	ONLY: constant_diffusion, cloud_droplets, cloud_physics, &
	77	data_output_masks, data_output_masks_user, &
	78	doav, doav_n, domask, domask_no, dz, dz_stretch_level, humidity,&
	79	mask, masks, mask_scale, mask_i, &
	80	mask_i_global, mask_j, mask_j_global, mask_k, mask_k_global, &
	81	mask_loop, mask_size, mask_size_l, mask_start_l, mask_x, &
	82	mask_x_loop, mask_xyz_dimension, mask_y, mask_y_loop, mask_z, &
	83	mask_z_loop, max_masks, message_string, mid, &
	84	netcdf_data_format, passive_scalar, ocean
	85
	86	USE grid_variables, &
	87	ONLY: dx, dy
	88
	89	USE indices, &
	90	ONLY: nx, nxl, nxr, ny, nyn, nys, nz, nzb, nzt
	91
	92	USE kinds
	93
[1324]	94	USE netcdf_control
[1320]	95
	96	USE particle_attributes, &
	97	ONLY: particle_advection
	98
[298]	99	USE pegrid
	100
	101	IMPLICIT NONE
	102
[1320]	103	CHARACTER (LEN=6) :: var !:
	104	CHARACTER (LEN=7) :: unit !:
	105
	106	CHARACTER (LEN=10), DIMENSION(max_masks,100) :: do_mask !:
	107	CHARACTER (LEN=10), DIMENSION(max_masks,100) :: do_mask_user !:
[298]	108
[1320]	109	INTEGER(iwp) :: i !:
	110	INTEGER(iwp) :: ilen !:
	111	INTEGER(iwp) :: ind(6) !:
	112	INTEGER(iwp) :: ind_array(1) !:
	113	INTEGER(iwp) :: j !:
	114	INTEGER(iwp) :: k !:
	115	INTEGER(iwp) :: n !:
	116	INTEGER(iwp) :: sender !:
	117
	118	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: tmp_array !:
[298]	119
[1320]	120	LOGICAL :: found !:
[298]	121	!
	122	!-- Allocation and initialization
	123	ALLOCATE( tmp_array( MAX(nx,ny,nz)+1 ) )
	124
	125	ALLOCATE( mask_i(max_masks,nxr-nxl+1), &
	126	mask_j(max_masks,nyn-nys+1), &
	127	mask_k(max_masks,nzt-nzb+1) )
	128	!
	129	!-- internal mask arrays ("mask,dimension,selection")
	130	ALLOCATE( mask(max_masks,3,mask_xyz_dimension), &
	131	mask_loop(max_masks,3,3) )
[493]	132
[298]	133	!
[493]	134	!-- Parallel mask output not yet tested
[1031]	135	IF ( netcdf_data_format > 4 ) THEN
[996]	136	message_string = 'netCDF file formats '// &
	137	'3 (netCDF 4) and 4 (netCDF 4 Classic model)'// &
[493]	138	'&are currently not supported (not yet tested).'
[564]	139	CALL message( 'init_masks', 'PA0328', 1, 2, 0, 6, 0 )
[298]	140	ENDIF
[553]	141
[298]	142	!
	143	!-- Store data output parameters for masked data output in few shared arrays
[996]	144	DO mid = 1, masks
[564]	145
[553]	146	do_mask (mid,:) = data_output_masks(mid,:)
	147	do_mask_user(mid,:) = data_output_masks_user(mid,:)
	148	mask (mid,1,:) = mask_x(mid,:)
	149	mask (mid,2,:) = mask_y(mid,:)
	150	mask (mid,3,:) = mask_z(mid,:)
[564]	151
[996]	152	IF ( mask_x_loop(mid,1) == -1.0 .AND. mask_x_loop(mid,2) == -1.0 &
	153	.AND. mask_x_loop(mid,3) == -1.0 ) THEN
	154	mask_loop(mid,1,1:2) = -1.0
[564]	155	mask_loop(mid,1,3) = 0.0
	156	ELSE
	157	mask_loop(mid,1,:) = mask_x_loop(mid,:)
	158	ENDIF
[996]	159	IF ( mask_y_loop(mid,1) == -1.0 .AND. mask_y_loop(mid,2) == -1.0 &
	160	.AND. mask_y_loop(mid,3) == -1.0 ) THEN
	161	mask_loop(mid,2,1:2) = -1.0
[564]	162	mask_loop(mid,2,3) = 0.0
	163	ELSE
	164	mask_loop(mid,2,:) = mask_y_loop(mid,:)
	165	ENDIF
[996]	166	IF ( mask_z_loop(mid,1) == -1.0 .AND. mask_z_loop(mid,2) == -1.0 &
	167	.AND. mask_z_loop(mid,3) == -1.0 ) THEN
	168	mask_loop(mid,3,1:2) = -1.0
[564]	169	mask_loop(mid,3,3) = 0.0
	170	ELSE
	171	mask_loop(mid,3,:) = mask_z_loop(mid,:)
	172	ENDIF
	173
[553]	174	ENDDO
	175
[298]	176	mask_i = -1; mask_j = -1; mask_k = -1
[553]	177
[298]	178	!
	179	!-- Global arrays are required by define_netcdf_header.
[1031]	180	IF ( myid == 0 .OR. netcdf_data_format > 4 ) THEN
[298]	181	ALLOCATE( mask_i_global(max_masks,nx+1), &
	182	mask_j_global(max_masks,ny+1), &
	183	mask_k_global(max_masks,nz+1) )
	184	mask_i_global = -1; mask_j_global = -1; mask_k_global = -1
	185	ENDIF
	186
	187	!
	188	!-- Determine variable names for each mask
	189	DO mid = 1, masks
	190	!
	191	!-- Append user-defined data output variables to the standard data output
	192	IF ( do_mask_user(mid,1) /= ' ' ) THEN
	193	i = 1
	194	DO WHILE ( do_mask(mid,i) /= ' ' .AND. i <= 100 )
	195	i = i + 1
	196	ENDDO
	197	j = 1
	198	DO WHILE ( do_mask_user(mid,j) /= ' ' .AND. j <= 100 )
	199	IF ( i > 100 ) THEN
	200	WRITE ( message_string, * ) 'number of output quantitities ', &
	201	'given by data_output_mask and data_output_mask_user ', &
	202	'exceeds the limit of 100'
[564]	203	CALL message( 'init_masks', 'PA0329', 1, 2, 0, 6, 0 )
[298]	204	ENDIF
	205	do_mask(mid,i) = do_mask_user(mid,j)
	206	i = i + 1
	207	j = j + 1
	208	ENDDO
	209	ENDIF
	210
	211	!
	212	!-- Check and set steering parameters for mask data output and averaging
	213	i = 1
[996]	214	DO WHILE ( do_mask(mid,i) /= ' ' .AND. i <= 100 )
[298]	215	!
	216	!-- Check for data averaging
	217	ilen = LEN_TRIM( do_mask(mid,i) )
	218	j = 0 ! no data averaging
	219	IF ( ilen > 3 ) THEN
	220	IF ( do_mask(mid,i)(ilen-2:ilen) == '_av' ) THEN
	221	j = 1 ! data averaging
	222	do_mask(mid,i) = do_mask(mid,i)(1:ilen-3)
	223	ENDIF
	224	ENDIF
	225	var = TRIM( do_mask(mid,i) )
	226	!
	227	!-- Check for allowed value and set units
	228	SELECT CASE ( TRIM( var ) )
	229
	230	CASE ( 'e' )
	231	IF ( constant_diffusion ) THEN
	232	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	233	'" requires constant_diffusion = .FALSE.'
[564]	234	CALL message( 'init_masks', 'PA0103', 1, 2, 0, 6, 0 )
[298]	235	ENDIF
	236	unit = 'm2/s2'
	237
[771]	238	CASE ( 'lpt' )
	239	IF ( .NOT. cloud_physics ) THEN
	240	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	241	'" requires cloud_physics = .TRUE.'
[773]	242	CALL message( 'init_masks', 'PA0108', 1, 2, 0, 6, 0 )
[771]	243	ENDIF
	244	unit = 'K'
	245
[298]	246	CASE ( 'pc', 'pr' )
	247	IF ( .NOT. particle_advection ) THEN
	248	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	249	'" requires a "particles_par"-NAMELIST in the ', &
	250	'parameter file (PARIN)'
[564]	251	CALL message( 'init_masks', 'PA0104', 1, 2, 0, 6, 0 )
[298]	252	ENDIF
	253	IF ( TRIM( var ) == 'pc' ) unit = 'number'
	254	IF ( TRIM( var ) == 'pr' ) unit = 'm'
	255
	256	CASE ( 'q', 'vpt' )
	257	IF ( .NOT. humidity ) THEN
	258	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	259	'" requires humidity = .TRUE.'
[564]	260	CALL message( 'init_masks', 'PA0105', 1, 2, 0, 6, 0 )
[298]	261	ENDIF
	262	IF ( TRIM( var ) == 'q' ) unit = 'kg/kg'
	263	IF ( TRIM( var ) == 'vpt' ) unit = 'K'
	264
	265	CASE ( 'ql' )
	266	IF ( .NOT. ( cloud_physics .OR. cloud_droplets ) ) THEN
	267	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	268	'" requires cloud_physics = .TRUE. or cloud_droplets', &
	269	' = .TRUE.'
[564]	270	CALL message( 'init_masks', 'PA0108', 1, 2, 0, 6, 0 )
[298]	271	ENDIF
	272	unit = 'kg/kg'
	273
	274	CASE ( 'ql_c', 'ql_v', 'ql_vp' )
	275	IF ( .NOT. cloud_droplets ) THEN
	276	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	277	'" requires cloud_droplets = .TRUE.'
[564]	278	CALL message( 'init_masks', 'PA0107', 1, 2, 0, 6, 0 )
[298]	279	ENDIF
	280	IF ( TRIM( var ) == 'ql_c' ) unit = 'kg/kg'
	281	IF ( TRIM( var ) == 'ql_v' ) unit = 'm3'
	282	IF ( TRIM( var ) == 'ql_vp' ) unit = 'none'
	283
	284	CASE ( 'qv' )
	285	IF ( .NOT. cloud_physics ) THEN
	286	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	287	'" requires cloud_physics = .TRUE.'
[564]	288	CALL message( 'init_masks', 'PA0108', 1, 2, 0, 6, 0 )
[298]	289	ENDIF
	290	unit = 'kg/kg'
	291
	292	CASE ( 'rho' )
	293	IF ( .NOT. ocean ) THEN
	294	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	295	'" requires ocean = .TRUE.'
[564]	296	CALL message( 'init_masks', 'PA0109', 1, 2, 0, 6, 0 )
[298]	297	ENDIF
	298	unit = 'kg/m3'
	299
	300	CASE ( 's' )
	301	IF ( .NOT. passive_scalar ) THEN
	302	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	303	'" requires passive_scalar = .TRUE.'
[564]	304	CALL message( 'init_masks', 'PA0110', 1, 2, 0, 6, 0 )
[298]	305	ENDIF
	306	unit = 'conc'
	307
	308	CASE ( 'sa' )
	309	IF ( .NOT. ocean ) THEN
	310	WRITE ( message_string, * ) 'output of "', TRIM( var ), &
	311	'" requires ocean = .TRUE.'
[564]	312	CALL message( 'init_masks', 'PA0109', 1, 2, 0, 6, 0 )
[298]	313	ENDIF
	314	unit = 'psu'
	315
[978]	316	CASE ( 'u', 't', 'lwp', 'pra', 'prr', 'z0', 'z0h*' )
[298]	317	WRITE ( message_string, * ) 'illegal value for data_',&
	318	'output: "', TRIM( var ), '" is only allowed', &
	319	'for horizontal cross section'
[564]	320	CALL message( 'init_masks', 'PA0111', 1, 2, 0, 6, 0 )
[298]	321
	322	CASE ( 'p', 'pt', 'u', 'v', 'w' )
	323	IF ( TRIM( var ) == 'p' ) unit = 'Pa'
	324	IF ( TRIM( var ) == 'pt' ) unit = 'K'
	325	IF ( TRIM( var ) == 'u' ) unit = 'm/s'
	326	IF ( TRIM( var ) == 'v' ) unit = 'm/s'
	327	IF ( TRIM( var ) == 'w' ) unit = 'm/s'
	328	CONTINUE
	329
	330	CASE DEFAULT
	331	CALL user_check_data_output( var, unit )
	332
	333	IF ( unit == 'illegal' ) THEN
	334	IF ( do_mask_user(mid,1) /= ' ' ) THEN
	335	WRITE ( message_string, * ) 'illegal value for data_',&
	336	'output or data_output_user: "', &
	337	TRIM( do_mask(mid,i) ), '"'
[564]	338	CALL message( 'init_masks', 'PA0114', 1, 2, 0, 6, 0 )
[298]	339	ELSE
	340	WRITE ( message_string, * ) 'illegal value for data_',&
	341	'output: "', TRIM( do_mask(mid,i) ), '"'
[564]	342	CALL message( 'init_masks', 'PA0330', 1, 2, 0, 6, 0 )
[298]	343	ENDIF
	344	ENDIF
	345
	346	END SELECT
	347	!
	348	!-- Set the internal steering parameters appropriately
	349	domask_no(mid,j) = domask_no(mid,j) + 1
	350	domask(mid,j,domask_no(mid,j)) = do_mask(mid,i)
	351	domask_unit(mid,j,domask_no(mid,j)) = unit
	352
	353	IF ( j == 1 ) THEN
	354	!
	355	!-- Check, if variable is already subject to averaging
	356	found = .FALSE.
	357	DO k = 1, doav_n
	358	IF ( TRIM( doav(k) ) == TRIM( var ) ) found = .TRUE.
	359	ENDDO
	360
	361	IF ( .NOT. found ) THEN
	362	doav_n = doav_n + 1
	363	doav(doav_n) = var
	364	ENDIF
	365	ENDIF
	366
	367	i = i + 1
	368
	369	ENDDO ! do_mask(mid,i)
	370	ENDDO ! mid
	371
	372
	373	!
	374	!-- Determine mask locations for each mask
	375	DO mid = 1, masks
	376	!
	377	!-- Set local masks for each subdomain along all three dimensions
	378	CALL set_mask_locations( 1, dx, 'dx', nx, 'nx', nxl, nxr )
	379	CALL set_mask_locations( 2, dy, 'dy', ny, 'ny', nys, nyn )
	380	CALL set_mask_locations( 3, dz, 'dz', nz, 'nz', nzb, nzt )
	381	!
	382	!-- Set global masks along all three dimensions (required by
	383	!-- define_netcdf_header).
[809]	384	#if defined( __parallel ) && ! defined ( __check )
[298]	385	!
	386	!-- PE0 receives partial arrays from all processors of the respective mask
	387	!-- and outputs them. Here a barrier has to be set, because otherwise
	388	!-- "-MPI- FATAL: Remote protocol queue full" may occur.
[807]	389
[298]	390	CALL MPI_BARRIER( comm2d, ierr )
	391
	392	IF ( myid == 0 ) THEN
	393	!
	394	!-- Local arrays can be relocated directly.
	395	mask_i_global(mid,mask_start_l(mid,1): &
	396	mask_start_l(mid,1)+mask_size_l(mid,1)-1) = &
	397	mask_i(mid,:mask_size_l(mid,1))
	398	mask_j_global(mid,mask_start_l(mid,2): &
	399	mask_start_l(mid,2)+mask_size_l(mid,2)-1) = &
	400	mask_j(mid,:mask_size_l(mid,2))
	401	mask_k_global(mid,mask_start_l(mid,3): &
	402	mask_start_l(mid,3)+mask_size_l(mid,3)-1) = &
	403	mask_k(mid,:mask_size_l(mid,3))
	404	!
	405	!-- Receive data from all other PEs.
	406	DO n = 1, numprocs-1
	407	!
	408	!-- Receive index limits first, then arrays.
	409	!-- Index limits are received in arbitrary order from the PEs.
	410	CALL MPI_RECV( ind(1), 6, MPI_INTEGER, MPI_ANY_SOURCE, 0, &
	411	comm2d, status, ierr )
	412	!
	413	!-- Not all PEs have data for the mask.
	414	IF ( ind(1) /= -9999 ) THEN
	415	sender = status(MPI_SOURCE)
	416	CALL MPI_RECV( tmp_array(ind(1)), ind(2)-ind(1)+1, &
[363]	417	MPI_INTEGER, sender, 1, comm2d, status, ierr )
[298]	418	mask_i_global(mid,ind(1):ind(2)) = tmp_array(ind(1):ind(2))
	419	CALL MPI_RECV( tmp_array(ind(3)), ind(4)-ind(3)+1, &
[363]	420	MPI_INTEGER, sender, 2, comm2d, status, ierr )
[298]	421	mask_j_global(mid,ind(3):ind(4)) = tmp_array(ind(3):ind(4))
	422	CALL MPI_RECV( tmp_array(ind(5)), ind(6)-ind(5)+1, &
[363]	423	MPI_INTEGER, sender, 3, comm2d, status, ierr )
[298]	424	mask_k_global(mid,ind(5):ind(6)) = tmp_array(ind(5):ind(6))
	425	ENDIF
	426	ENDDO
	427
	428	ELSE
	429	!
	430	!-- If at least part of the mask resides on the PE, send the index limits
	431	!-- for the target array, otherwise send -9999 to PE0.
[996]	432	IF ( mask_size_l(mid,1) > 0 .AND. mask_size_l(mid,2) > 0 .AND. &
	433	mask_size_l(mid,3) > 0 ) THEN
[298]	434	ind(1) = mask_start_l(mid,1)
	435	ind(2) = mask_start_l(mid,1) + mask_size_l(mid,1) - 1
	436	ind(3) = mask_start_l(mid,2)
	437	ind(4) = mask_start_l(mid,2) + mask_size_l(mid,2) - 1
	438	ind(5) = mask_start_l(mid,3)
	439	ind(6) = mask_start_l(mid,3) + mask_size_l(mid,3) - 1
	440	ELSE
	441	ind(1) = -9999; ind(2) = -9999
	442	ind(3) = -9999; ind(4) = -9999
	443	ind(5) = -9999; ind(6) = -9999
	444	ENDIF
	445	CALL MPI_SEND( ind(1), 6, MPI_INTEGER, 0, 0, comm2d, ierr )
	446	!
	447	!-- If applicable, send data to PE0.
	448	IF ( ind(1) /= -9999 ) THEN
	449	tmp_array(:mask_size_l(mid,1)) = mask_i(mid,:mask_size_l(mid,1))
	450	CALL MPI_SEND( tmp_array(1), mask_size_l(mid,1), &
[363]	451	MPI_INTEGER, 0, 1, comm2d, ierr )
[298]	452	tmp_array(:mask_size_l(mid,2)) = mask_j(mid,:mask_size_l(mid,2))
	453	CALL MPI_SEND( tmp_array(1), mask_size_l(mid,2), &
[363]	454	MPI_INTEGER, 0, 2, comm2d, ierr )
[298]	455	tmp_array(:mask_size_l(mid,3)) = mask_k(mid,:mask_size_l(mid,3))
	456	CALL MPI_SEND( tmp_array(1), mask_size_l(mid,3), &
[363]	457	MPI_INTEGER, 0, 3, comm2d, ierr )
[298]	458	ENDIF
	459	ENDIF
	460	!
	461	!-- A barrier has to be set, because otherwise some PEs may proceed too fast
	462	!-- so that PE0 may receive wrong data on tag 0.
	463	CALL MPI_BARRIER( comm2d, ierr )
[409]	464
[1031]	465	IF ( netcdf_data_format > 4 ) THEN
[409]	466
[493]	467	CALL MPI_BCAST( mask_i_global(mid,:), nx+1, MPI_INTEGER, 0, comm2d, &
	468	ierr )
	469	CALL MPI_BCAST( mask_j_global(mid,:), ny+1, MPI_INTEGER, 0, comm2d, &
	470	ierr )
	471	CALL MPI_BCAST( mask_k_global(mid,:), nz+1, MPI_INTEGER, 0, comm2d, &
	472	ierr )
[409]	473
	474	ENDIF
[298]	475
[809]	476	#elif ! defined ( __parallel )
[298]	477	!
	478	!-- Local arrays can be relocated directly.
	479	mask_i_global(mid,:) = mask_i(mid,:)
	480	mask_j_global(mid,:) = mask_j(mid,:)
	481	mask_k_global(mid,:) = mask_k(mid,:)
	482	#endif
	483	ENDDO ! mid
	484
	485	DEALLOCATE( tmp_array )
	486	!
	487	!-- Internal mask arrays cannot be deallocated on PE 0 because they are
	488	!-- required for header output on PE 0.
	489	IF ( myid /= 0 ) DEALLOCATE( mask, mask_loop )
	490
	491	CONTAINS
[493]	492
[298]	493	SUBROUTINE set_mask_locations( dim, dxyz, dxyz_string, nxyz, nxyz_string, &
	494	lb, ub )
	495	!------------------------------------------------------------------------------!
	496	!
	497	! Description:
	498	! ------------
	499	! Set local mask for each subdomain along 'dim' direction.
	500	!------------------------------------------------------------------------------!
	501
	502	IMPLICIT NONE
	503
[1320]	504	CHARACTER (LEN=2) :: dxyz_string !:
	505	CHARACTER (LEN=2) :: nxyz_string !:
	506
	507	INTEGER(iwp) :: count !:
	508	INTEGER(iwp) :: count_l !:
	509	INTEGER(iwp) :: dim !:
	510	INTEGER(iwp) :: m !:
	511	INTEGER(iwp) :: loop_begin !:
	512	INTEGER(iwp) :: loop_end !:
	513	INTEGER(iwp) :: loop_stride !:
	514	INTEGER(iwp) :: lb !:
	515	INTEGER(iwp) :: nxyz !:
	516	INTEGER(iwp) :: ub !:
	517
	518	REAL(wp) :: dxyz !:
	519	REAL(wp) :: ddxyz !:
	520	REAL(wp) :: tmp1 !:
	521	REAL(wp) :: tmp2 !:
[298]	522
	523	count = 0; count_l = 0; ddxyz = 1.0 / dxyz; tmp1 = 0.0; tmp2 = 0.0
	524
	525	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	526	!
	527	!-- use predefined mask_* array
	528	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	529	count = count + 1
	530	IF ( dim == 1 .OR. dim == 2 ) THEN
[1032]	531	m = NINT( mask(mid,dim,count) * mask_scale(dim) * ddxyz - 0.5 )
[298]	532	ELSEIF ( dim == 3 ) THEN
	533	ind_array = &
[595]	534	MINLOC( ABS( mask(mid,dim,count) * mask_scale(dim) - zu ) )
[298]	535	m = ind_array(1) - 1 + nzb ! MINLOC uses lower array bound 1
	536	ENDIF
	537	IF ( m > nxyz ) THEN
[303]	538	WRITE ( message_string, '(I3,A,I3,A,I1,3A,I3)' ) &
	539	m,' in mask ',mid,' along dimension ',dim, &
	540	' exceeds ',nxyz_string,' = ',nxyz
[564]	541	CALL message( 'init_masks', 'PA0331', 1, 2, 0, 6, 0 )
[298]	542	ENDIF
	543	IF ( m >= lb .AND. m <= ub ) THEN
	544	IF ( count_l == 0 ) mask_start_l(mid,dim) = count
	545	count_l = count_l + 1
	546	IF ( dim == 1 ) THEN
	547	mask_i(mid,count_l) = m
	548	ELSEIF ( dim == 2 ) THEN
	549	mask_j(mid,count_l) = m
	550	ELSEIF ( dim == 3 ) THEN
	551	mask_k(mid,count_l) = m
	552	ENDIF
	553	ENDIF
	554	IF ( count == mask_xyz_dimension ) EXIT
	555	ENDDO
	556	mask_size(mid,dim) = count
	557	mask_size_l(mid,dim) = count_l
	558
	559	ELSE
	560	!
	561	!-- use predefined mask_loop_* array, or use the default (all grid points
	562	!-- along this direction)
	563	IF ( mask_loop(mid,dim,1) < 0.0 ) THEN
	564	tmp1 = mask_loop(mid,dim,1)
[1186]	565	mask_loop(mid,dim,1) = zw(nzb) ! lowest level (default)
[298]	566	ENDIF
	567	IF ( dim == 1 .OR. dim == 2 ) THEN
	568	IF ( mask_loop(mid,dim,2) < 0.0 ) THEN
	569	tmp2 = mask_loop(mid,dim,2)
[303]	570	mask_loop(mid,dim,2) = nxyz*dxyz / mask_scale(dim) ! (default)
[298]	571	ENDIF
	572	IF ( MAXVAL( mask_loop(mid,dim,1:2) ) &
[303]	573	> nxyz * dxyz / mask_scale(dim) ) THEN
	574	WRITE ( message_string, '(2(A,I3,A,I1,A,F9.3),5A,I1,A,F9.3)' ) &
	575	'mask_loop(',mid,',',dim,',1)=',mask_loop(mid,dim,1), &
	576	' and/or mask_loop(',mid,',',dim,',2)=', &
	577	mask_loop(mid,dim,2),'&exceed ', &
	578	nxyz_string,'*',dxyz_string,'/mask_scale(',dim,')=', &
	579	nxyz*dxyz/mask_scale(dim)
[564]	580	CALL message( 'init_masks', 'PA0332', 1, 2, 0, 6, 0 )
[298]	581	ENDIF
[1032]	582	loop_begin = NINT( mask_loop(mid,dim,1) * mask_scale(dim) &
	583	* ddxyz - 0.5 )
	584	loop_end = NINT( mask_loop(mid,dim,2) * mask_scale(dim) &
	585	* ddxyz - 0.5 )
	586	loop_stride = NINT( mask_loop(mid,dim,3) * mask_scale(dim) &
	587	* ddxyz )
[298]	588	ELSEIF ( dim == 3 ) THEN
	589	IF ( mask_loop(mid,dim,2) < 0.0 ) THEN
	590	tmp2 = mask_loop(mid,dim,2)
[595]	591	mask_loop(mid,dim,2) = zu(nz) / mask_scale(dim) ! (default)
[298]	592	ENDIF
	593	IF ( MAXVAL( mask_loop(mid,dim,1:2) ) &
[595]	594	> zu(nz) / mask_scale(dim) ) THEN
[303]	595	WRITE ( message_string, '(2(A,I3,A,I1,A,F9.3),A,I1,A,F9.3)' ) &
	596	'mask_loop(',mid,',',dim,',1)=',mask_loop(mid,dim,1), &
	597	' and/or mask_loop(',mid,',',dim,',2)=', &
[595]	598	mask_loop(mid,dim,2),'&exceed zu(nz)/mask_scale(',dim, &
	599	')=',zu(nz)/mask_scale(dim)
[564]	600	CALL message( 'init_masks', 'PA0333', 1, 2, 0, 6, 0 )
[298]	601	ENDIF
[303]	602	ind_array = &
[595]	603	MINLOC( ABS( mask_loop(mid,dim,1) * mask_scale(dim) - zu ) )
[298]	604	loop_begin = &
[303]	605	ind_array(1) - 1 + nzb ! MINLOC uses lower array bound 1
	606	ind_array = &
[595]	607	MINLOC( ABS( mask_loop(mid,dim,2) * mask_scale(dim) - zu ) )
[298]	608	loop_end = ind_array(1) - 1 + nzb ! MINLOC uses lower array bound 1
	609	!
[303]	610	!-- The following line assumes a constant vertical grid spacing within
	611	!-- the vertical mask range; it fails for vertical grid stretching.
	612	!-- Maybe revise later. Issue warning but continue execution.
	613	loop_stride = NINT( mask_loop(mid,dim,3) * mask_scale(dim) * ddxyz )
	614
	615	IF ( mask_loop(mid,dim,2) * mask_scale(dim) > dz_stretch_level ) &
	616	THEN
[557]	617	WRITE ( message_string, '(A,I3,A,I1,A,F9.3,A,F8.2,3A)' ) &
	618	'mask_loop(',mid,',',dim,',2)=', mask_loop(mid,dim,2),&
[303]	619	' exceeds dz_stretch_level=',dz_stretch_level, &
	620	'.&Vertical mask locations will not ', &
	621	'match the desired heights&within the stretching ', &
	622	'region. Recommendation: use mask instead of mask_loop.'
[564]	623	CALL message( 'init_masks', 'PA0334', 0, 1, 0, 6, 0 )
[303]	624	ENDIF
	625
[298]	626	ENDIF
	627	!
	628	!-- If necessary, reset mask_loop(mid,dim,1) and mask_loop(mid,dim,2).
	629	IF ( tmp1 < 0.0 ) mask_loop(mid,dim,1) = tmp1
	630	IF ( tmp2 < 0.0 ) mask_loop(mid,dim,2) = tmp2
	631	!
	632	!-- The default stride +/-1 (every grid point) applies if
	633	!-- mask_loop(mid,dim,3) is not specified (its default is zero).
	634	IF ( loop_stride == 0 ) THEN
	635	IF ( loop_end >= loop_begin ) THEN
	636	loop_stride = 1
	637	ELSE
	638	loop_stride = -1
	639	ENDIF
	640	ENDIF
	641	DO m = loop_begin, loop_end, loop_stride
	642	count = count + 1
[996]	643	IF ( m >= lb .AND. m <= ub ) THEN
[298]	644	IF ( count_l == 0 ) mask_start_l(mid,dim) = count
	645	count_l = count_l + 1
	646	IF ( dim == 1 ) THEN
	647	mask_i(mid,count_l) = m
	648	ELSEIF ( dim == 2 ) THEN
	649	mask_j(mid,count_l) = m
	650	ELSEIF ( dim == 3 ) THEN
	651	mask_k(mid,count_l) = m
	652	ENDIF
	653	ENDIF
	654	ENDDO
	655	mask_size(mid,dim) = count
	656	mask_size_l(mid,dim) = count_l
	657	ENDIF
	658
	659	END SUBROUTINE set_mask_locations
	660
	661	END SUBROUTINE init_masks

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |