[1] | 1 | SUBROUTINE init_grid |
---|
| 2 | |
---|
| 3 | !------------------------------------------------------------------------------! |
---|
[254] | 4 | ! Current revisions: |
---|
[1] | 5 | ! ----------------- |
---|
[861] | 6 | ! Set wall_flags_0. The array is needed for degradation in ws-scheme near walls, |
---|
| 7 | ! inflow and outflow boundaries as well as near the bottom and the top of the |
---|
| 8 | ! model domain. |
---|
[668] | 9 | ! |
---|
[861] | 10 | ! Initialization of nzb_s_inner and nzb_w_inner. |
---|
| 11 | ! gls has to be at least nbgp to do not exceed the array bounds of nzb_local |
---|
| 12 | ! while setting wall_flags_0 |
---|
| 13 | ! |
---|
[668] | 14 | ! Former revisions: |
---|
| 15 | ! ----------------- |
---|
| 16 | ! $Id: init_grid.f90 861 2012-03-26 14:18:34Z suehring $ |
---|
| 17 | ! |
---|
[844] | 18 | ! 843 2012-02-29 15:16:21Z gryschka |
---|
| 19 | ! In case of ocean and dirichlet bc for u and v at the bottom |
---|
| 20 | ! the first u-level ist defined at same height as the first w-level |
---|
| 21 | ! |
---|
[819] | 22 | ! 818 2012-02-08 16:11:23Z maronga |
---|
| 23 | ! Bugfix: topo_height is only required if topography is used. It is thus now |
---|
| 24 | ! allocated in the topography branch |
---|
| 25 | ! |
---|
[810] | 26 | ! 809 2012-01-30 13:32:58Z maronga |
---|
| 27 | ! Bugfix: replaced .AND. and .NOT. with && and ! in the preprocessor directives |
---|
| 28 | ! |
---|
[808] | 29 | ! 807 2012-01-25 11:53:51Z maronga |
---|
| 30 | ! New cpp directive "__check" implemented which is used by check_namelist_files |
---|
| 31 | ! |
---|
[760] | 32 | ! 759 2011-09-15 13:58:31Z raasch |
---|
| 33 | ! Splitting of parallel I/O in blocks of PEs |
---|
| 34 | ! |
---|
[723] | 35 | ! 722 2011-04-11 06:21:09Z raasch |
---|
| 36 | ! Bugfix: bc_lr/ns_cyc replaced by bc_lr/ns, because variables are not yet set |
---|
| 37 | ! here |
---|
| 38 | ! |
---|
[710] | 39 | ! 709 2011-03-30 09:31:40Z raasch |
---|
| 40 | ! formatting adjustments |
---|
| 41 | ! |
---|
[708] | 42 | ! 707 2011-03-29 11:39:40Z raasch |
---|
| 43 | ! bc_lr/ns replaced by bc_lr/ns_cyc |
---|
| 44 | ! |
---|
[668] | 45 | ! 667 2010-12-23 12:06:00Z suehring/gryschka |
---|
[667] | 46 | ! Definition of new array bounds nxlg, nxrg, nysg, nyng on each PE. |
---|
| 47 | ! Furthermore the allocation of arrays and steering of loops is done with these |
---|
| 48 | ! parameters. Call of exchange_horiz are modified. |
---|
| 49 | ! In case of dirichlet bounday condition at the bottom zu(0)=0.0 |
---|
| 50 | ! dzu_mg has to be set explicitly for a equally spaced grid near bottom. |
---|
| 51 | ! ddzu_pres added to use a equally spaced grid near bottom. |
---|
[139] | 52 | ! |
---|
[556] | 53 | ! 555 2010-09-07 07:32:53Z raasch |
---|
[818] | 54 | ! Bugfix: default setting of nzb_local for flat topography |
---|
[556] | 55 | ! |
---|
[392] | 56 | ! 274 2009-03-26 15:11:21Z heinze |
---|
| 57 | ! Output of messages replaced by message handling routine. |
---|
| 58 | ! new topography case 'single_street_canyon' |
---|
| 59 | ! |
---|
[226] | 60 | ! 217 2008-12-09 18:00:48Z letzel |
---|
| 61 | ! +topography_grid_convention |
---|
| 62 | ! |
---|
[139] | 63 | ! 134 2007-11-21 07:28:38Z letzel |
---|
[134] | 64 | ! Redefine initial nzb_local as the actual total size of topography (later the |
---|
| 65 | ! extent of topography in nzb_local is reduced by 1dx at the E topography walls |
---|
| 66 | ! and by 1dy at the N topography walls to form the basis for nzb_s_inner); |
---|
| 67 | ! for consistency redefine 'single_building' case. |
---|
[114] | 68 | ! Calculation of wall flag arrays |
---|
[1] | 69 | ! |
---|
[98] | 70 | ! 94 2007-06-01 15:25:22Z raasch |
---|
| 71 | ! Grid definition for ocean version |
---|
| 72 | ! |
---|
[77] | 73 | ! 75 2007-03-22 09:54:05Z raasch |
---|
| 74 | ! storage of topography height arrays zu_s_inner and zw_s_inner, |
---|
| 75 | ! 2nd+3rd argument removed from exchange horiz |
---|
| 76 | ! |
---|
[39] | 77 | ! 19 2007-02-23 04:53:48Z raasch |
---|
| 78 | ! Setting of nzt_diff |
---|
| 79 | ! |
---|
[3] | 80 | ! RCS Log replace by Id keyword, revision history cleaned up |
---|
| 81 | ! |
---|
[1] | 82 | ! Revision 1.17 2006/08/22 14:00:05 raasch |
---|
| 83 | ! +dz_max to limit vertical stretching, |
---|
| 84 | ! bugfix in index array initialization for line- or point-like topography |
---|
| 85 | ! structures |
---|
| 86 | ! |
---|
| 87 | ! Revision 1.1 1997/08/11 06:17:45 raasch |
---|
| 88 | ! Initial revision (Testversion) |
---|
| 89 | ! |
---|
| 90 | ! |
---|
| 91 | ! Description: |
---|
| 92 | ! ------------ |
---|
| 93 | ! Creating grid depending constants |
---|
| 94 | !------------------------------------------------------------------------------! |
---|
| 95 | |
---|
| 96 | USE arrays_3d |
---|
| 97 | USE control_parameters |
---|
| 98 | USE grid_variables |
---|
| 99 | USE indices |
---|
| 100 | USE pegrid |
---|
| 101 | |
---|
| 102 | IMPLICIT NONE |
---|
| 103 | |
---|
[240] | 104 | INTEGER :: bh, blx, bly, bxl, bxr, byn, bys, ch, cwx, cwy, cxl, cxr, cyn, & |
---|
[759] | 105 | cys, gls, i, ii, inc, i_center, j, j_center, k, l, nxl_l, & |
---|
| 106 | nxr_l, nyn_l, nys_l, nzb_si, nzt_l, vi |
---|
[1] | 107 | |
---|
| 108 | INTEGER, DIMENSION(:), ALLOCATABLE :: vertical_influence |
---|
| 109 | |
---|
| 110 | INTEGER, DIMENSION(:,:), ALLOCATABLE :: corner_nl, corner_nr, corner_sl, & |
---|
| 111 | corner_sr, wall_l, wall_n, wall_r,& |
---|
| 112 | wall_s, nzb_local, nzb_tmp |
---|
| 113 | |
---|
[861] | 114 | LOGICAL :: flag_set = .FALSE. |
---|
| 115 | |
---|
[1] | 116 | REAL :: dx_l, dy_l, dz_stretched |
---|
| 117 | |
---|
[818] | 118 | REAL, DIMENSION(:,:), ALLOCATABLE :: topo_height |
---|
[1] | 119 | |
---|
| 120 | REAL, DIMENSION(:,:,:), ALLOCATABLE :: distance |
---|
[667] | 121 | |
---|
[1] | 122 | ! |
---|
[709] | 123 | !-- Calculation of horizontal array bounds including ghost layers |
---|
[667] | 124 | nxlg = nxl - nbgp |
---|
| 125 | nxrg = nxr + nbgp |
---|
| 126 | nysg = nys - nbgp |
---|
| 127 | nyng = nyn + nbgp |
---|
[709] | 128 | |
---|
[667] | 129 | ! |
---|
[1] | 130 | !-- Allocate grid arrays |
---|
| 131 | ALLOCATE( ddzu(1:nzt+1), ddzw(1:nzt+1), dd2zu(1:nzt), dzu(1:nzt+1), & |
---|
[667] | 132 | dzw(1:nzt+1), l_grid(1:nzt), zu(nzb:nzt+1), zw(nzb:nzt+1) ) |
---|
[1] | 133 | |
---|
| 134 | ! |
---|
| 135 | !-- Compute height of u-levels from constant grid length and dz stretch factors |
---|
| 136 | IF ( dz == -1.0 ) THEN |
---|
[254] | 137 | message_string = 'missing dz' |
---|
| 138 | CALL message( 'init_grid', 'PA0200', 1, 2, 0, 6, 0 ) |
---|
[1] | 139 | ELSEIF ( dz <= 0.0 ) THEN |
---|
[254] | 140 | WRITE( message_string, * ) 'dz=',dz,' <= 0.0' |
---|
| 141 | CALL message( 'init_grid', 'PA0201', 1, 2, 0, 6, 0 ) |
---|
[1] | 142 | ENDIF |
---|
[94] | 143 | |
---|
[1] | 144 | ! |
---|
[94] | 145 | !-- Define the vertical grid levels |
---|
| 146 | IF ( .NOT. ocean ) THEN |
---|
| 147 | ! |
---|
| 148 | !-- Grid for atmosphere with surface at z=0 (k=0, w-grid). |
---|
[843] | 149 | !-- The second u-level (k=1) corresponds to the top of the |
---|
[94] | 150 | !-- Prandtl-layer. |
---|
[667] | 151 | |
---|
| 152 | IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2 ) THEN |
---|
| 153 | zu(0) = 0.0 |
---|
| 154 | ! zu(0) = - dz * 0.5 |
---|
| 155 | ELSE |
---|
| 156 | zu(0) = - dz * 0.5 |
---|
| 157 | ENDIF |
---|
[94] | 158 | zu(1) = dz * 0.5 |
---|
[1] | 159 | |
---|
[94] | 160 | dz_stretch_level_index = nzt+1 |
---|
| 161 | dz_stretched = dz |
---|
| 162 | DO k = 2, nzt+1 |
---|
| 163 | IF ( dz_stretch_level <= zu(k-1) .AND. dz_stretched < dz_max ) THEN |
---|
| 164 | dz_stretched = dz_stretched * dz_stretch_factor |
---|
| 165 | dz_stretched = MIN( dz_stretched, dz_max ) |
---|
| 166 | IF ( dz_stretch_level_index == nzt+1 ) dz_stretch_level_index = k-1 |
---|
| 167 | ENDIF |
---|
| 168 | zu(k) = zu(k-1) + dz_stretched |
---|
| 169 | ENDDO |
---|
[1] | 170 | |
---|
| 171 | ! |
---|
[94] | 172 | !-- Compute the w-levels. They are always staggered half-way between the |
---|
[843] | 173 | !-- corresponding u-levels. In case of dirichlet bc for u and v at the |
---|
| 174 | !-- ground the first u- and w-level (k=0) are defined at same height (z=0). |
---|
| 175 | !-- The top w-level is extrapolated linearly. |
---|
[94] | 176 | zw(0) = 0.0 |
---|
| 177 | DO k = 1, nzt |
---|
| 178 | zw(k) = ( zu(k) + zu(k+1) ) * 0.5 |
---|
| 179 | ENDDO |
---|
| 180 | zw(nzt+1) = zw(nzt) + 2.0 * ( zu(nzt+1) - zw(nzt) ) |
---|
[1] | 181 | |
---|
[94] | 182 | ELSE |
---|
[1] | 183 | ! |
---|
[843] | 184 | !-- Grid for ocean with free water surface is at k=nzt (w-grid). |
---|
| 185 | !-- In case of neumann bc at the ground the first first u-level (k=0) lies |
---|
| 186 | !-- below the first w-level (k=0). In case of dirichlet bc the first u- and |
---|
| 187 | !-- w-level are defined at same height, but staggered from the second level. |
---|
| 188 | !-- The second u-level (k=1) corresponds to the top of the Prandtl-layer. |
---|
[94] | 189 | zu(nzt+1) = dz * 0.5 |
---|
| 190 | zu(nzt) = - dz * 0.5 |
---|
| 191 | |
---|
| 192 | dz_stretch_level_index = 0 |
---|
| 193 | dz_stretched = dz |
---|
| 194 | DO k = nzt-1, 0, -1 |
---|
| 195 | IF ( dz_stretch_level <= ABS( zu(k+1) ) .AND. & |
---|
| 196 | dz_stretched < dz_max ) THEN |
---|
| 197 | dz_stretched = dz_stretched * dz_stretch_factor |
---|
| 198 | dz_stretched = MIN( dz_stretched, dz_max ) |
---|
| 199 | IF ( dz_stretch_level_index == 0 ) dz_stretch_level_index = k+1 |
---|
| 200 | ENDIF |
---|
| 201 | zu(k) = zu(k+1) - dz_stretched |
---|
| 202 | ENDDO |
---|
| 203 | |
---|
| 204 | ! |
---|
| 205 | !-- Compute the w-levels. They are always staggered half-way between the |
---|
[843] | 206 | !-- corresponding u-levels, except in case of dirichlet bc for u and v |
---|
| 207 | !-- at the ground. In this case the first u- and w-level are defined at |
---|
| 208 | !-- same height. The top w-level (nzt+1) is not used but set for |
---|
| 209 | !-- consistency, since w and all scalar variables are defined up tp nzt+1. |
---|
[94] | 210 | zw(nzt+1) = dz |
---|
| 211 | zw(nzt) = 0.0 |
---|
| 212 | DO k = 0, nzt |
---|
| 213 | zw(k) = ( zu(k) + zu(k+1) ) * 0.5 |
---|
| 214 | ENDDO |
---|
| 215 | |
---|
[843] | 216 | ! |
---|
| 217 | !-- In case of dirichlet bc for u and v the first u- and w-level are defined |
---|
| 218 | !-- at same height. |
---|
| 219 | IF ( ibc_uv_b == 0 ) THEN |
---|
| 220 | zu(0) = zw(0) |
---|
| 221 | ENDIF |
---|
| 222 | |
---|
[94] | 223 | ENDIF |
---|
| 224 | |
---|
| 225 | ! |
---|
[1] | 226 | !-- Compute grid lengths. |
---|
| 227 | DO k = 1, nzt+1 |
---|
| 228 | dzu(k) = zu(k) - zu(k-1) |
---|
| 229 | ddzu(k) = 1.0 / dzu(k) |
---|
| 230 | dzw(k) = zw(k) - zw(k-1) |
---|
| 231 | ddzw(k) = 1.0 / dzw(k) |
---|
| 232 | ENDDO |
---|
| 233 | |
---|
| 234 | DO k = 1, nzt |
---|
| 235 | dd2zu(k) = 1.0 / ( dzu(k) + dzu(k+1) ) |
---|
| 236 | ENDDO |
---|
[667] | 237 | |
---|
| 238 | ! |
---|
[709] | 239 | !-- The FFT- SOR-pressure solvers assume grid spacings of a staggered grid |
---|
| 240 | !-- everywhere. For the actual grid, the grid spacing at the lowest level |
---|
| 241 | !-- is only dz/2, but should be dz. Therefore, an additional array |
---|
| 242 | !-- containing with appropriate grid information is created for these |
---|
| 243 | !-- solvers. |
---|
| 244 | IF ( psolver /= 'multigrid' ) THEN |
---|
[667] | 245 | ALLOCATE( ddzu_pres(1:nzt+1) ) |
---|
| 246 | ddzu_pres = ddzu |
---|
[709] | 247 | IF( .NOT. ocean ) ddzu_pres(1) = ddzu_pres(2) ! change for lowest level |
---|
[667] | 248 | ENDIF |
---|
[1] | 249 | |
---|
| 250 | ! |
---|
| 251 | !-- In case of multigrid method, compute grid lengths and grid factors for the |
---|
| 252 | !-- grid levels |
---|
| 253 | IF ( psolver == 'multigrid' ) THEN |
---|
| 254 | |
---|
| 255 | ALLOCATE( ddx2_mg(maximum_grid_level), ddy2_mg(maximum_grid_level), & |
---|
| 256 | dzu_mg(nzb+1:nzt+1,maximum_grid_level), & |
---|
| 257 | dzw_mg(nzb+1:nzt+1,maximum_grid_level), & |
---|
| 258 | f1_mg(nzb+1:nzt,maximum_grid_level), & |
---|
| 259 | f2_mg(nzb+1:nzt,maximum_grid_level), & |
---|
| 260 | f3_mg(nzb+1:nzt,maximum_grid_level) ) |
---|
| 261 | |
---|
| 262 | dzu_mg(:,maximum_grid_level) = dzu |
---|
[667] | 263 | ! |
---|
[709] | 264 | !-- Next line to ensure an equally spaced grid. For ocean runs this is not |
---|
| 265 | !-- necessary, |
---|
[667] | 266 | !-- because zu(0) does not changed so far. Also this would cause errors |
---|
| 267 | !-- if a vertical stretching for ocean runs is used. |
---|
| 268 | IF ( .NOT. ocean ) dzu_mg(1,maximum_grid_level) = dzu(2) |
---|
[709] | 269 | |
---|
[1] | 270 | dzw_mg(:,maximum_grid_level) = dzw |
---|
| 271 | nzt_l = nzt |
---|
| 272 | DO l = maximum_grid_level-1, 1, -1 |
---|
| 273 | dzu_mg(nzb+1,l) = 2.0 * dzu_mg(nzb+1,l+1) |
---|
| 274 | dzw_mg(nzb+1,l) = 2.0 * dzw_mg(nzb+1,l+1) |
---|
| 275 | nzt_l = nzt_l / 2 |
---|
| 276 | DO k = 2, nzt_l+1 |
---|
| 277 | dzu_mg(k,l) = dzu_mg(2*k-2,l+1) + dzu_mg(2*k-1,l+1) |
---|
| 278 | dzw_mg(k,l) = dzw_mg(2*k-2,l+1) + dzw_mg(2*k-1,l+1) |
---|
| 279 | ENDDO |
---|
| 280 | ENDDO |
---|
| 281 | |
---|
| 282 | nzt_l = nzt |
---|
| 283 | dx_l = dx |
---|
| 284 | dy_l = dy |
---|
| 285 | DO l = maximum_grid_level, 1, -1 |
---|
| 286 | ddx2_mg(l) = 1.0 / dx_l**2 |
---|
| 287 | ddy2_mg(l) = 1.0 / dy_l**2 |
---|
| 288 | DO k = nzb+1, nzt_l |
---|
| 289 | f2_mg(k,l) = 1.0 / ( dzu_mg(k+1,l) * dzw_mg(k,l) ) |
---|
| 290 | f3_mg(k,l) = 1.0 / ( dzu_mg(k,l) * dzw_mg(k,l) ) |
---|
| 291 | f1_mg(k,l) = 2.0 * ( ddx2_mg(l) + ddy2_mg(l) ) + & |
---|
| 292 | f2_mg(k,l) + f3_mg(k,l) |
---|
| 293 | ENDDO |
---|
| 294 | nzt_l = nzt_l / 2 |
---|
| 295 | dx_l = dx_l * 2.0 |
---|
| 296 | dy_l = dy_l * 2.0 |
---|
| 297 | ENDDO |
---|
| 298 | |
---|
| 299 | ENDIF |
---|
| 300 | |
---|
| 301 | ! |
---|
| 302 | !-- Compute the reciprocal values of the horizontal grid lengths. |
---|
| 303 | ddx = 1.0 / dx |
---|
| 304 | ddy = 1.0 / dy |
---|
| 305 | dx2 = dx * dx |
---|
| 306 | dy2 = dy * dy |
---|
| 307 | ddx2 = 1.0 / dx2 |
---|
| 308 | ddy2 = 1.0 / dy2 |
---|
| 309 | |
---|
| 310 | ! |
---|
| 311 | !-- Compute the grid-dependent mixing length. |
---|
| 312 | DO k = 1, nzt |
---|
| 313 | l_grid(k) = ( dx * dy * dzw(k) )**0.33333333333333 |
---|
| 314 | ENDDO |
---|
| 315 | |
---|
| 316 | ! |
---|
| 317 | !-- Allocate outer and inner index arrays for topography and set |
---|
[114] | 318 | !-- defaults. |
---|
| 319 | !-- nzb_local has to contain additional layers of ghost points for calculating |
---|
| 320 | !-- the flag arrays needed for the multigrid method |
---|
| 321 | gls = 2**( maximum_grid_level ) |
---|
[861] | 322 | IF ( gls < nbgp ) gls = nbgp |
---|
[667] | 323 | |
---|
[114] | 324 | ALLOCATE( corner_nl(nys:nyn,nxl:nxr), corner_nr(nys:nyn,nxl:nxr), & |
---|
| 325 | corner_sl(nys:nyn,nxl:nxr), corner_sr(nys:nyn,nxl:nxr), & |
---|
[667] | 326 | nzb_local(-gls:ny+gls,-gls:nx+gls), & |
---|
| 327 | nzb_tmp(-nbgp:ny+nbgp,-nbgp:nx+nbgp), & |
---|
[114] | 328 | wall_l(nys:nyn,nxl:nxr), wall_n(nys:nyn,nxl:nxr), & |
---|
[1] | 329 | wall_r(nys:nyn,nxl:nxr), wall_s(nys:nyn,nxl:nxr) ) |
---|
[667] | 330 | ALLOCATE( fwxm(nysg:nyng,nxlg:nxrg), fwxp(nysg:nyng,nxlg:nxrg), & |
---|
| 331 | fwym(nysg:nyng,nxlg:nxrg), fwyp(nysg:nyng,nxlg:nxrg), & |
---|
| 332 | fxm(nysg:nyng,nxlg:nxrg), fxp(nysg:nyng,nxlg:nxrg), & |
---|
| 333 | fym(nysg:nyng,nxlg:nxrg), fyp(nysg:nyng,nxlg:nxrg), & |
---|
| 334 | nzb_s_inner(nysg:nyng,nxlg:nxrg), & |
---|
| 335 | nzb_s_outer(nysg:nyng,nxlg:nxrg), & |
---|
| 336 | nzb_u_inner(nysg:nyng,nxlg:nxrg), & |
---|
| 337 | nzb_u_outer(nysg:nyng,nxlg:nxrg), & |
---|
| 338 | nzb_v_inner(nysg:nyng,nxlg:nxrg), & |
---|
| 339 | nzb_v_outer(nysg:nyng,nxlg:nxrg), & |
---|
| 340 | nzb_w_inner(nysg:nyng,nxlg:nxrg), & |
---|
| 341 | nzb_w_outer(nysg:nyng,nxlg:nxrg), & |
---|
| 342 | nzb_diff_s_inner(nysg:nyng,nxlg:nxrg), & |
---|
| 343 | nzb_diff_s_outer(nysg:nyng,nxlg:nxrg), & |
---|
| 344 | nzb_diff_u(nysg:nyng,nxlg:nxrg), & |
---|
| 345 | nzb_diff_v(nysg:nyng,nxlg:nxrg), & |
---|
| 346 | nzb_2d(nysg:nyng,nxlg:nxrg), & |
---|
| 347 | wall_e_x(nysg:nyng,nxlg:nxrg), & |
---|
| 348 | wall_e_y(nysg:nyng,nxlg:nxrg), & |
---|
| 349 | wall_u(nysg:nyng,nxlg:nxrg), & |
---|
| 350 | wall_v(nysg:nyng,nxlg:nxrg), & |
---|
| 351 | wall_w_x(nysg:nyng,nxlg:nxrg), & |
---|
| 352 | wall_w_y(nysg:nyng,nxlg:nxrg) ) |
---|
[1] | 353 | |
---|
| 354 | |
---|
[667] | 355 | |
---|
| 356 | ALLOCATE( l_wall(nzb:nzt+1,nysg:nyng,nxlg:nxrg) ) |
---|
| 357 | |
---|
[818] | 358 | |
---|
[1] | 359 | nzb_s_inner = nzb; nzb_s_outer = nzb |
---|
| 360 | nzb_u_inner = nzb; nzb_u_outer = nzb |
---|
| 361 | nzb_v_inner = nzb; nzb_v_outer = nzb |
---|
| 362 | nzb_w_inner = nzb; nzb_w_outer = nzb |
---|
| 363 | |
---|
| 364 | ! |
---|
[19] | 365 | !-- Define vertical gridpoint from (or to) which on the usual finite difference |
---|
[1] | 366 | !-- form (which does not use surface fluxes) is applied |
---|
| 367 | IF ( prandtl_layer .OR. use_surface_fluxes ) THEN |
---|
| 368 | nzb_diff = nzb + 2 |
---|
| 369 | ELSE |
---|
| 370 | nzb_diff = nzb + 1 |
---|
| 371 | ENDIF |
---|
[19] | 372 | IF ( use_top_fluxes ) THEN |
---|
| 373 | nzt_diff = nzt - 1 |
---|
| 374 | ELSE |
---|
| 375 | nzt_diff = nzt |
---|
| 376 | ENDIF |
---|
[1] | 377 | |
---|
| 378 | nzb_diff_s_inner = nzb_diff; nzb_diff_s_outer = nzb_diff |
---|
| 379 | nzb_diff_u = nzb_diff; nzb_diff_v = nzb_diff |
---|
| 380 | |
---|
| 381 | wall_e_x = 0.0; wall_e_y = 0.0; wall_u = 0.0; wall_v = 0.0 |
---|
| 382 | wall_w_x = 0.0; wall_w_y = 0.0 |
---|
| 383 | fwxp = 1.0; fwxm = 1.0; fwyp = 1.0; fwym = 1.0 |
---|
| 384 | fxp = 1.0; fxm = 1.0; fyp = 1.0; fym = 1.0 |
---|
| 385 | |
---|
| 386 | ! |
---|
| 387 | !-- Initialize near-wall mixing length l_wall only in the vertical direction |
---|
| 388 | !-- for the moment, |
---|
| 389 | !-- multiplication with wall_adjustment_factor near the end of this routine |
---|
| 390 | l_wall(nzb,:,:) = l_grid(1) |
---|
| 391 | DO k = nzb+1, nzt |
---|
| 392 | l_wall(k,:,:) = l_grid(k) |
---|
| 393 | ENDDO |
---|
| 394 | l_wall(nzt+1,:,:) = l_grid(nzt) |
---|
| 395 | |
---|
| 396 | ALLOCATE ( vertical_influence(nzb:nzt) ) |
---|
| 397 | DO k = 1, nzt |
---|
| 398 | vertical_influence(k) = MIN ( INT( l_grid(k) / & |
---|
| 399 | ( wall_adjustment_factor * dzw(k) ) + 0.5 ), nzt - k ) |
---|
| 400 | ENDDO |
---|
| 401 | |
---|
| 402 | DO k = 1, MAXVAL( nzb_s_inner ) |
---|
| 403 | IF ( l_grid(k) > 1.5 * dx * wall_adjustment_factor .OR. & |
---|
| 404 | l_grid(k) > 1.5 * dy * wall_adjustment_factor ) THEN |
---|
[254] | 405 | WRITE( message_string, * ) 'grid anisotropy exceeds ', & |
---|
| 406 | 'threshold given by only local', & |
---|
| 407 | ' &horizontal reduction of near_wall ', & |
---|
| 408 | 'mixing length l_wall', & |
---|
| 409 | ' &starting from height level k = ', k, '.' |
---|
| 410 | CALL message( 'init_grid', 'PA0202', 0, 1, 0, 6, 0 ) |
---|
[1] | 411 | EXIT |
---|
| 412 | ENDIF |
---|
| 413 | ENDDO |
---|
| 414 | vertical_influence(0) = vertical_influence(1) |
---|
| 415 | |
---|
[667] | 416 | DO i = nxlg, nxrg |
---|
| 417 | DO j = nysg, nyng |
---|
[1] | 418 | DO k = nzb_s_inner(j,i) + 1, & |
---|
| 419 | nzb_s_inner(j,i) + vertical_influence(nzb_s_inner(j,i)) |
---|
| 420 | l_wall(k,j,i) = zu(k) - zw(nzb_s_inner(j,i)) |
---|
| 421 | ENDDO |
---|
| 422 | ENDDO |
---|
| 423 | ENDDO |
---|
| 424 | |
---|
| 425 | ! |
---|
| 426 | !-- Set outer and inner index arrays for non-flat topography. |
---|
| 427 | !-- Here consistency checks concerning domain size and periodicity are |
---|
| 428 | !-- necessary. |
---|
| 429 | !-- Within this SELECT CASE structure only nzb_local is initialized |
---|
| 430 | !-- individually depending on the chosen topography type, all other index |
---|
| 431 | !-- arrays are initialized further below. |
---|
| 432 | SELECT CASE ( TRIM( topography ) ) |
---|
| 433 | |
---|
| 434 | CASE ( 'flat' ) |
---|
| 435 | ! |
---|
[555] | 436 | !-- nzb_local is required for the multigrid solver |
---|
| 437 | nzb_local = 0 |
---|
[1] | 438 | |
---|
| 439 | CASE ( 'single_building' ) |
---|
| 440 | ! |
---|
| 441 | !-- Single rectangular building, by default centered in the middle of the |
---|
| 442 | !-- total domain |
---|
| 443 | blx = NINT( building_length_x / dx ) |
---|
| 444 | bly = NINT( building_length_y / dy ) |
---|
| 445 | bh = NINT( building_height / dz ) |
---|
| 446 | |
---|
| 447 | IF ( building_wall_left == 9999999.9 ) THEN |
---|
| 448 | building_wall_left = ( nx + 1 - blx ) / 2 * dx |
---|
| 449 | ENDIF |
---|
| 450 | bxl = NINT( building_wall_left / dx ) |
---|
| 451 | bxr = bxl + blx |
---|
| 452 | |
---|
| 453 | IF ( building_wall_south == 9999999.9 ) THEN |
---|
| 454 | building_wall_south = ( ny + 1 - bly ) / 2 * dy |
---|
| 455 | ENDIF |
---|
| 456 | bys = NINT( building_wall_south / dy ) |
---|
| 457 | byn = bys + bly |
---|
| 458 | |
---|
| 459 | ! |
---|
| 460 | !-- Building size has to meet some requirements |
---|
| 461 | IF ( ( bxl < 1 ) .OR. ( bxr > nx-1 ) .OR. ( bxr < bxl+3 ) .OR. & |
---|
| 462 | ( bys < 1 ) .OR. ( byn > ny-1 ) .OR. ( byn < bys+3 ) ) THEN |
---|
[274] | 463 | WRITE( message_string, * ) 'inconsistent building parameters:', & |
---|
| 464 | '& bxl=', bxl, 'bxr=', bxr, 'bys=', bys, & |
---|
| 465 | 'byn=', byn, 'nx=', nx, 'ny=', ny |
---|
[254] | 466 | CALL message( 'init_grid', 'PA0203', 1, 2, 0, 6, 0 ) |
---|
[1] | 467 | ENDIF |
---|
| 468 | |
---|
| 469 | ! |
---|
[217] | 470 | !-- Define the building. |
---|
[1] | 471 | nzb_local = 0 |
---|
[134] | 472 | nzb_local(bys:byn,bxl:bxr) = bh |
---|
[1] | 473 | |
---|
[240] | 474 | CASE ( 'single_street_canyon' ) |
---|
| 475 | ! |
---|
| 476 | !-- Single quasi-2D street canyon of infinite length in x or y direction. |
---|
| 477 | !-- The canyon is centered in the other direction by default. |
---|
| 478 | IF ( canyon_width_x /= 9999999.9 ) THEN |
---|
| 479 | ! |
---|
| 480 | !-- Street canyon in y direction |
---|
| 481 | cwx = NINT( canyon_width_x / dx ) |
---|
| 482 | IF ( canyon_wall_left == 9999999.9 ) THEN |
---|
| 483 | canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx |
---|
| 484 | ENDIF |
---|
| 485 | cxl = NINT( canyon_wall_left / dx ) |
---|
| 486 | cxr = cxl + cwx |
---|
| 487 | |
---|
| 488 | ELSEIF ( canyon_width_y /= 9999999.9 ) THEN |
---|
| 489 | ! |
---|
| 490 | !-- Street canyon in x direction |
---|
| 491 | cwy = NINT( canyon_width_y / dy ) |
---|
| 492 | IF ( canyon_wall_south == 9999999.9 ) THEN |
---|
| 493 | canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy |
---|
| 494 | ENDIF |
---|
| 495 | cys = NINT( canyon_wall_south / dy ) |
---|
| 496 | cyn = cys + cwy |
---|
| 497 | |
---|
| 498 | ELSE |
---|
[254] | 499 | |
---|
| 500 | message_string = 'no street canyon width given' |
---|
| 501 | CALL message( 'init_grid', 'PA0204', 1, 2, 0, 6, 0 ) |
---|
| 502 | |
---|
[240] | 503 | ENDIF |
---|
| 504 | |
---|
| 505 | ch = NINT( canyon_height / dz ) |
---|
| 506 | dp_level_ind_b = ch |
---|
| 507 | ! |
---|
| 508 | !-- Street canyon size has to meet some requirements |
---|
| 509 | IF ( canyon_width_x /= 9999999.9 ) THEN |
---|
| 510 | IF ( ( cxl < 1 ) .OR. ( cxr > nx-1 ) .OR. ( cwx < 3 ) .OR. & |
---|
| 511 | ( ch < 3 ) ) THEN |
---|
[254] | 512 | WRITE( message_string, * ) 'inconsistent canyon parameters:', & |
---|
[274] | 513 | '&cxl=', cxl, 'cxr=', cxr, & |
---|
| 514 | 'cwx=', cwx, & |
---|
[254] | 515 | 'ch=', ch, 'nx=', nx, 'ny=', ny |
---|
| 516 | CALL message( 'init_grid', 'PA0205', 1, 2, 0, 6, 0 ) |
---|
[240] | 517 | ENDIF |
---|
| 518 | ELSEIF ( canyon_width_y /= 9999999.9 ) THEN |
---|
| 519 | IF ( ( cys < 1 ) .OR. ( cyn > ny-1 ) .OR. ( cwy < 3 ) .OR. & |
---|
| 520 | ( ch < 3 ) ) THEN |
---|
[254] | 521 | WRITE( message_string, * ) 'inconsistent canyon parameters:', & |
---|
[274] | 522 | '&cys=', cys, 'cyn=', cyn, & |
---|
| 523 | 'cwy=', cwy, & |
---|
[254] | 524 | 'ch=', ch, 'nx=', nx, 'ny=', ny |
---|
| 525 | CALL message( 'init_grid', 'PA0206', 1, 2, 0, 6, 0 ) |
---|
[240] | 526 | ENDIF |
---|
| 527 | ENDIF |
---|
[274] | 528 | IF ( canyon_width_x /= 9999999.9 .AND. canyon_width_y /= 9999999.9 ) & |
---|
[240] | 529 | THEN |
---|
[274] | 530 | message_string = 'inconsistent canyon parameters:' // & |
---|
[254] | 531 | '&street canyon can only be oriented' // & |
---|
| 532 | '&either in x- or in y-direction' |
---|
| 533 | CALL message( 'init_grid', 'PA0207', 1, 2, 0, 6, 0 ) |
---|
[240] | 534 | ENDIF |
---|
| 535 | |
---|
| 536 | nzb_local = ch |
---|
| 537 | IF ( canyon_width_x /= 9999999.9 ) THEN |
---|
| 538 | nzb_local(:,cxl+1:cxr-1) = 0 |
---|
| 539 | ELSEIF ( canyon_width_y /= 9999999.9 ) THEN |
---|
| 540 | nzb_local(cys+1:cyn-1,:) = 0 |
---|
| 541 | ENDIF |
---|
| 542 | |
---|
[1] | 543 | CASE ( 'read_from_file' ) |
---|
[759] | 544 | |
---|
[818] | 545 | ALLOCATE ( topo_height(0:ny,0:nx) ) |
---|
| 546 | |
---|
[759] | 547 | DO ii = 0, io_blocks-1 |
---|
| 548 | IF ( ii == io_group ) THEN |
---|
| 549 | |
---|
[1] | 550 | ! |
---|
[759] | 551 | !-- Arbitrary irregular topography data in PALM format (exactly |
---|
| 552 | !-- matching the grid size and total domain size) |
---|
| 553 | OPEN( 90, FILE='TOPOGRAPHY_DATA', STATUS='OLD', & |
---|
| 554 | FORM='FORMATTED', ERR=10 ) |
---|
| 555 | DO j = ny, 0, -1 |
---|
| 556 | READ( 90, *, ERR=11, END=11 ) ( topo_height(j,i), i = 0,nx ) |
---|
| 557 | ENDDO |
---|
| 558 | |
---|
| 559 | GOTO 12 |
---|
| 560 | |
---|
| 561 | 10 message_string = 'file TOPOGRAPHY_DATA does not exist' |
---|
| 562 | CALL message( 'init_grid', 'PA0208', 1, 2, 0, 6, 0 ) |
---|
| 563 | |
---|
| 564 | 11 message_string = 'errors in file TOPOGRAPHY_DATA' |
---|
| 565 | CALL message( 'init_grid', 'PA0209', 1, 2, 0, 6, 0 ) |
---|
| 566 | |
---|
| 567 | 12 CLOSE( 90 ) |
---|
| 568 | |
---|
| 569 | ENDIF |
---|
[809] | 570 | #if defined( __parallel ) && ! defined ( __check ) |
---|
[759] | 571 | CALL MPI_BARRIER( comm2d, ierr ) |
---|
| 572 | #endif |
---|
[559] | 573 | ENDDO |
---|
[759] | 574 | |
---|
[1] | 575 | ! |
---|
| 576 | !-- Calculate the index height of the topography |
---|
| 577 | DO i = 0, nx |
---|
| 578 | DO j = 0, ny |
---|
| 579 | nzb_local(j,i) = NINT( topo_height(j,i) / dz ) |
---|
| 580 | ENDDO |
---|
| 581 | ENDDO |
---|
[818] | 582 | |
---|
| 583 | DEALLOCATE ( topo_height ) |
---|
[114] | 584 | ! |
---|
[759] | 585 | !-- Add cyclic boundaries (additional layers are for calculating |
---|
| 586 | !-- flag arrays needed for the multigrid sover) |
---|
[114] | 587 | nzb_local(-gls:-1,0:nx) = nzb_local(ny-gls+1:ny,0:nx) |
---|
| 588 | nzb_local(ny+1:ny+gls,0:nx) = nzb_local(0:gls-1,0:nx) |
---|
| 589 | nzb_local(:,-gls:-1) = nzb_local(:,nx-gls+1:nx) |
---|
| 590 | nzb_local(:,nx+1:nx+gls) = nzb_local(:,0:gls-1) |
---|
[667] | 591 | |
---|
[1] | 592 | CASE DEFAULT |
---|
| 593 | ! |
---|
| 594 | !-- The DEFAULT case is reached either if the parameter topography |
---|
[217] | 595 | !-- contains a wrong character string or if the user has defined a special |
---|
[1] | 596 | !-- case in the user interface. There, the subroutine user_init_grid |
---|
| 597 | !-- checks which of these two conditions applies. |
---|
[114] | 598 | CALL user_init_grid( gls, nzb_local ) |
---|
[1] | 599 | |
---|
| 600 | END SELECT |
---|
| 601 | ! |
---|
[861] | 602 | !-- Determine the maximum level of topography. Furthermore it is used for |
---|
| 603 | !-- steering the degradation of order of the applied advection scheme. |
---|
| 604 | nzb_max = MAXVAL( nzb_local ) |
---|
| 605 | ! |
---|
[1] | 606 | !-- Consistency checks and index array initialization are only required for |
---|
[217] | 607 | !-- non-flat topography, also the initialization of topography height arrays |
---|
[49] | 608 | !-- zu_s_inner and zw_w_inner |
---|
[1] | 609 | IF ( TRIM( topography ) /= 'flat' ) THEN |
---|
| 610 | |
---|
| 611 | ! |
---|
| 612 | !-- Consistency checks |
---|
| 613 | IF ( MINVAL( nzb_local ) < 0 .OR. MAXVAL( nzb_local ) > nz + 1 ) THEN |
---|
[274] | 614 | WRITE( message_string, * ) 'nzb_local values are outside the', & |
---|
| 615 | 'model domain', & |
---|
| 616 | '&MINVAL( nzb_local ) = ', MINVAL(nzb_local), & |
---|
| 617 | '&MAXVAL( nzb_local ) = ', MAXVAL(nzb_local) |
---|
[254] | 618 | CALL message( 'init_grid', 'PA0210', 1, 2, 0, 6, 0 ) |
---|
[1] | 619 | ENDIF |
---|
| 620 | |
---|
[722] | 621 | IF ( bc_lr == 'cyclic' ) THEN |
---|
[1] | 622 | IF ( ANY( nzb_local(:,-1) /= nzb_local(:,nx) ) .OR. & |
---|
| 623 | ANY( nzb_local(:,0) /= nzb_local(:,nx+1) ) ) THEN |
---|
[254] | 624 | message_string = 'nzb_local does not fulfill cyclic' // & |
---|
| 625 | ' boundary condition in x-direction' |
---|
| 626 | CALL message( 'init_grid', 'PA0211', 1, 2, 0, 6, 0 ) |
---|
[1] | 627 | ENDIF |
---|
| 628 | ENDIF |
---|
[722] | 629 | IF ( bc_ns == 'cyclic' ) THEN |
---|
[1] | 630 | IF ( ANY( nzb_local(-1,:) /= nzb_local(ny,:) ) .OR. & |
---|
| 631 | ANY( nzb_local(0,:) /= nzb_local(ny+1,:) ) ) THEN |
---|
[254] | 632 | message_string = 'nzb_local does not fulfill cyclic' // & |
---|
| 633 | ' boundary condition in y-direction' |
---|
| 634 | CALL message( 'init_grid', 'PA0212', 1, 2, 0, 6, 0 ) |
---|
[1] | 635 | ENDIF |
---|
| 636 | ENDIF |
---|
| 637 | |
---|
[217] | 638 | IF ( topography_grid_convention == 'cell_edge' ) THEN |
---|
[134] | 639 | ! |
---|
[217] | 640 | !-- The array nzb_local as defined using the 'cell_edge' convention |
---|
| 641 | !-- describes the actual total size of topography which is defined at the |
---|
| 642 | !-- cell edges where u=0 on the topography walls in x-direction and v=0 |
---|
| 643 | !-- on the topography walls in y-direction. However, PALM uses individual |
---|
| 644 | !-- arrays nzb_u|v|w|s_inner|outer that are based on nzb_s_inner. |
---|
| 645 | !-- Therefore, the extent of topography in nzb_local is now reduced by |
---|
| 646 | !-- 1dx at the E topography walls and by 1dy at the N topography walls |
---|
| 647 | !-- to form the basis for nzb_s_inner. |
---|
| 648 | DO j = -gls, ny + gls |
---|
| 649 | DO i = -gls, nx |
---|
| 650 | nzb_local(j,i) = MIN( nzb_local(j,i), nzb_local(j,i+1) ) |
---|
| 651 | ENDDO |
---|
[134] | 652 | ENDDO |
---|
[217] | 653 | !-- apply cyclic boundary conditions in x-direction |
---|
| 654 | !(ist das erforderlich? Ursache von Seung Bus Fehler?) |
---|
| 655 | nzb_local(:,nx+1:nx+gls) = nzb_local(:,0:gls-1) |
---|
| 656 | DO i = -gls, nx + gls |
---|
| 657 | DO j = -gls, ny |
---|
| 658 | nzb_local(j,i) = MIN( nzb_local(j,i), nzb_local(j+1,i) ) |
---|
| 659 | ENDDO |
---|
[134] | 660 | ENDDO |
---|
[217] | 661 | !-- apply cyclic boundary conditions in y-direction |
---|
| 662 | !(ist das erforderlich? Ursache von Seung Bus Fehler?) |
---|
| 663 | nzb_local(ny+1:ny+gls,:) = nzb_local(0:gls-1,:) |
---|
| 664 | ENDIF |
---|
[134] | 665 | |
---|
[1] | 666 | ! |
---|
| 667 | !-- Initialize index arrays nzb_s_inner and nzb_w_inner |
---|
[861] | 668 | nzb_s_inner = nzb_local(nysg:nyng,nxlg:nxrg) |
---|
| 669 | nzb_w_inner = nzb_local(nysg:nyng,nxlg:nxrg) |
---|
[1] | 670 | |
---|
| 671 | ! |
---|
| 672 | !-- Initialize remaining index arrays: |
---|
| 673 | !-- first pre-initialize them with nzb_s_inner... |
---|
| 674 | nzb_u_inner = nzb_s_inner |
---|
| 675 | nzb_u_outer = nzb_s_inner |
---|
| 676 | nzb_v_inner = nzb_s_inner |
---|
| 677 | nzb_v_outer = nzb_s_inner |
---|
| 678 | nzb_w_outer = nzb_s_inner |
---|
| 679 | nzb_s_outer = nzb_s_inner |
---|
| 680 | |
---|
| 681 | ! |
---|
| 682 | !-- ...then extend pre-initialized arrays in their according directions |
---|
| 683 | !-- based on nzb_local using nzb_tmp as a temporary global index array |
---|
| 684 | |
---|
| 685 | ! |
---|
| 686 | !-- nzb_s_outer: |
---|
| 687 | !-- extend nzb_local east-/westwards first, then north-/southwards |
---|
[667] | 688 | nzb_tmp = nzb_local(-nbgp:ny+nbgp,-nbgp:nx+nbgp) |
---|
[1] | 689 | DO j = -1, ny + 1 |
---|
| 690 | DO i = 0, nx |
---|
| 691 | nzb_tmp(j,i) = MAX( nzb_local(j,i-1), nzb_local(j,i), & |
---|
| 692 | nzb_local(j,i+1) ) |
---|
| 693 | ENDDO |
---|
| 694 | ENDDO |
---|
| 695 | DO i = nxl, nxr |
---|
| 696 | DO j = nys, nyn |
---|
| 697 | nzb_s_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i), & |
---|
| 698 | nzb_tmp(j+1,i) ) |
---|
| 699 | ENDDO |
---|
| 700 | ! |
---|
| 701 | !-- non-cyclic boundary conditions (overwritten by call of |
---|
| 702 | !-- exchange_horiz_2d_int below in case of cyclic boundary conditions) |
---|
| 703 | IF ( nys == 0 ) THEN |
---|
| 704 | j = -1 |
---|
| 705 | nzb_s_outer(j,i) = MAX( nzb_tmp(j+1,i), nzb_tmp(j,i) ) |
---|
| 706 | ENDIF |
---|
| 707 | IF ( nys == ny ) THEN |
---|
| 708 | j = ny + 1 |
---|
| 709 | nzb_s_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i) ) |
---|
| 710 | ENDIF |
---|
| 711 | ENDDO |
---|
| 712 | ! |
---|
| 713 | !-- nzb_w_outer: |
---|
| 714 | !-- identical to nzb_s_outer |
---|
| 715 | nzb_w_outer = nzb_s_outer |
---|
| 716 | |
---|
| 717 | ! |
---|
| 718 | !-- nzb_u_inner: |
---|
| 719 | !-- extend nzb_local rightwards only |
---|
[667] | 720 | nzb_tmp = nzb_local(-nbgp:ny+nbgp,-nbgp:nx+nbgp) |
---|
[1] | 721 | DO j = -1, ny + 1 |
---|
| 722 | DO i = 0, nx + 1 |
---|
| 723 | nzb_tmp(j,i) = MAX( nzb_local(j,i-1), nzb_local(j,i) ) |
---|
| 724 | ENDDO |
---|
| 725 | ENDDO |
---|
[667] | 726 | nzb_u_inner = nzb_tmp(nysg:nyng,nxlg:nxrg) |
---|
[1] | 727 | |
---|
| 728 | ! |
---|
| 729 | !-- nzb_u_outer: |
---|
| 730 | !-- extend current nzb_tmp (nzb_u_inner) north-/southwards |
---|
| 731 | DO i = nxl, nxr |
---|
| 732 | DO j = nys, nyn |
---|
| 733 | nzb_u_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i), & |
---|
| 734 | nzb_tmp(j+1,i) ) |
---|
| 735 | ENDDO |
---|
| 736 | ! |
---|
| 737 | !-- non-cyclic boundary conditions (overwritten by call of |
---|
| 738 | !-- exchange_horiz_2d_int below in case of cyclic boundary conditions) |
---|
| 739 | IF ( nys == 0 ) THEN |
---|
| 740 | j = -1 |
---|
| 741 | nzb_u_outer(j,i) = MAX( nzb_tmp(j+1,i), nzb_tmp(j,i) ) |
---|
| 742 | ENDIF |
---|
| 743 | IF ( nys == ny ) THEN |
---|
| 744 | j = ny + 1 |
---|
| 745 | nzb_u_outer(j,i) = MAX( nzb_tmp(j-1,i), nzb_tmp(j,i) ) |
---|
| 746 | ENDIF |
---|
| 747 | ENDDO |
---|
| 748 | |
---|
| 749 | ! |
---|
| 750 | !-- nzb_v_inner: |
---|
| 751 | !-- extend nzb_local northwards only |
---|
[667] | 752 | nzb_tmp = nzb_local(-nbgp:ny+nbgp,-nbgp:nx+nbgp) |
---|
[1] | 753 | DO i = -1, nx + 1 |
---|
| 754 | DO j = 0, ny + 1 |
---|
| 755 | nzb_tmp(j,i) = MAX( nzb_local(j-1,i), nzb_local(j,i) ) |
---|
| 756 | ENDDO |
---|
| 757 | ENDDO |
---|
[667] | 758 | nzb_v_inner = nzb_tmp(nys-nbgp:nyn+nbgp,nxl-nbgp:nxr+nbgp) |
---|
[1] | 759 | |
---|
| 760 | ! |
---|
| 761 | !-- nzb_v_outer: |
---|
| 762 | !-- extend current nzb_tmp (nzb_v_inner) right-/leftwards |
---|
| 763 | DO j = nys, nyn |
---|
| 764 | DO i = nxl, nxr |
---|
| 765 | nzb_v_outer(j,i) = MAX( nzb_tmp(j,i-1), nzb_tmp(j,i), & |
---|
| 766 | nzb_tmp(j,i+1) ) |
---|
| 767 | ENDDO |
---|
| 768 | ! |
---|
| 769 | !-- non-cyclic boundary conditions (overwritten by call of |
---|
| 770 | !-- exchange_horiz_2d_int below in case of cyclic boundary conditions) |
---|
| 771 | IF ( nxl == 0 ) THEN |
---|
| 772 | i = -1 |
---|
| 773 | nzb_v_outer(j,i) = MAX( nzb_tmp(j,i+1), nzb_tmp(j,i) ) |
---|
| 774 | ENDIF |
---|
| 775 | IF ( nxr == nx ) THEN |
---|
| 776 | i = nx + 1 |
---|
| 777 | nzb_v_outer(j,i) = MAX( nzb_tmp(j,i-1), nzb_tmp(j,i) ) |
---|
| 778 | ENDIF |
---|
| 779 | ENDDO |
---|
[809] | 780 | #if ! defined ( __check ) |
---|
[1] | 781 | ! |
---|
| 782 | !-- Exchange of lateral boundary values (parallel computers) and cyclic |
---|
| 783 | !-- boundary conditions, if applicable. |
---|
| 784 | !-- Since nzb_s_inner and nzb_w_inner are derived directly from nzb_local |
---|
| 785 | !-- they do not require exchange and are not included here. |
---|
| 786 | CALL exchange_horiz_2d_int( nzb_u_inner ) |
---|
| 787 | CALL exchange_horiz_2d_int( nzb_u_outer ) |
---|
| 788 | CALL exchange_horiz_2d_int( nzb_v_inner ) |
---|
| 789 | CALL exchange_horiz_2d_int( nzb_v_outer ) |
---|
| 790 | CALL exchange_horiz_2d_int( nzb_w_outer ) |
---|
| 791 | CALL exchange_horiz_2d_int( nzb_s_outer ) |
---|
| 792 | |
---|
[49] | 793 | ! |
---|
| 794 | !-- Allocate and set the arrays containing the topography height |
---|
| 795 | IF ( myid == 0 ) THEN |
---|
| 796 | |
---|
| 797 | ALLOCATE( zu_s_inner(0:nx+1,0:ny+1), zw_w_inner(0:nx+1,0:ny+1) ) |
---|
| 798 | |
---|
| 799 | DO i = 0, nx + 1 |
---|
| 800 | DO j = 0, ny + 1 |
---|
| 801 | zu_s_inner(i,j) = zu(nzb_local(j,i)) |
---|
| 802 | zw_w_inner(i,j) = zw(nzb_local(j,i)) |
---|
| 803 | ENDDO |
---|
| 804 | ENDDO |
---|
| 805 | |
---|
| 806 | ENDIF |
---|
[807] | 807 | #endif |
---|
[1] | 808 | ENDIF |
---|
| 809 | |
---|
[809] | 810 | #if ! defined ( __check ) |
---|
[1] | 811 | ! |
---|
| 812 | !-- Preliminary: to be removed after completion of the topography code! |
---|
| 813 | !-- Set the former default k index arrays nzb_2d |
---|
| 814 | nzb_2d = nzb |
---|
| 815 | |
---|
| 816 | ! |
---|
| 817 | !-- Set the individual index arrays which define the k index from which on |
---|
| 818 | !-- the usual finite difference form (which does not use surface fluxes) is |
---|
| 819 | !-- applied |
---|
| 820 | IF ( prandtl_layer .OR. use_surface_fluxes ) THEN |
---|
| 821 | nzb_diff_u = nzb_u_inner + 2 |
---|
| 822 | nzb_diff_v = nzb_v_inner + 2 |
---|
| 823 | nzb_diff_s_inner = nzb_s_inner + 2 |
---|
| 824 | nzb_diff_s_outer = nzb_s_outer + 2 |
---|
| 825 | ELSE |
---|
| 826 | nzb_diff_u = nzb_u_inner + 1 |
---|
| 827 | nzb_diff_v = nzb_v_inner + 1 |
---|
| 828 | nzb_diff_s_inner = nzb_s_inner + 1 |
---|
| 829 | nzb_diff_s_outer = nzb_s_outer + 1 |
---|
| 830 | ENDIF |
---|
| 831 | |
---|
| 832 | ! |
---|
| 833 | !-- Calculation of wall switches and factors required by diffusion_u/v.f90 and |
---|
| 834 | !-- for limitation of near-wall mixing length l_wall further below |
---|
| 835 | corner_nl = 0 |
---|
| 836 | corner_nr = 0 |
---|
| 837 | corner_sl = 0 |
---|
| 838 | corner_sr = 0 |
---|
| 839 | wall_l = 0 |
---|
| 840 | wall_n = 0 |
---|
| 841 | wall_r = 0 |
---|
| 842 | wall_s = 0 |
---|
| 843 | |
---|
| 844 | DO i = nxl, nxr |
---|
| 845 | DO j = nys, nyn |
---|
| 846 | ! |
---|
| 847 | !-- u-component |
---|
| 848 | IF ( nzb_u_outer(j,i) > nzb_u_outer(j+1,i) ) THEN |
---|
| 849 | wall_u(j,i) = 1.0 ! north wall (location of adjacent fluid) |
---|
| 850 | fym(j,i) = 0.0 |
---|
| 851 | fyp(j,i) = 1.0 |
---|
| 852 | ELSEIF ( nzb_u_outer(j,i) > nzb_u_outer(j-1,i) ) THEN |
---|
| 853 | wall_u(j,i) = 1.0 ! south wall (location of adjacent fluid) |
---|
| 854 | fym(j,i) = 1.0 |
---|
| 855 | fyp(j,i) = 0.0 |
---|
| 856 | ENDIF |
---|
| 857 | ! |
---|
| 858 | !-- v-component |
---|
| 859 | IF ( nzb_v_outer(j,i) > nzb_v_outer(j,i+1) ) THEN |
---|
| 860 | wall_v(j,i) = 1.0 ! rigth wall (location of adjacent fluid) |
---|
| 861 | fxm(j,i) = 0.0 |
---|
| 862 | fxp(j,i) = 1.0 |
---|
| 863 | ELSEIF ( nzb_v_outer(j,i) > nzb_v_outer(j,i-1) ) THEN |
---|
| 864 | wall_v(j,i) = 1.0 ! left wall (location of adjacent fluid) |
---|
| 865 | fxm(j,i) = 1.0 |
---|
| 866 | fxp(j,i) = 0.0 |
---|
| 867 | ENDIF |
---|
| 868 | ! |
---|
| 869 | !-- w-component, also used for scalars, separate arrays for shear |
---|
| 870 | !-- production of tke |
---|
| 871 | IF ( nzb_w_outer(j,i) > nzb_w_outer(j+1,i) ) THEN |
---|
| 872 | wall_e_y(j,i) = 1.0 ! north wall (location of adjacent fluid) |
---|
| 873 | wall_w_y(j,i) = 1.0 |
---|
| 874 | fwym(j,i) = 0.0 |
---|
| 875 | fwyp(j,i) = 1.0 |
---|
| 876 | ELSEIF ( nzb_w_outer(j,i) > nzb_w_outer(j-1,i) ) THEN |
---|
| 877 | wall_e_y(j,i) = -1.0 ! south wall (location of adjacent fluid) |
---|
| 878 | wall_w_y(j,i) = 1.0 |
---|
| 879 | fwym(j,i) = 1.0 |
---|
| 880 | fwyp(j,i) = 0.0 |
---|
| 881 | ENDIF |
---|
| 882 | IF ( nzb_w_outer(j,i) > nzb_w_outer(j,i+1) ) THEN |
---|
| 883 | wall_e_x(j,i) = 1.0 ! right wall (location of adjacent fluid) |
---|
| 884 | wall_w_x(j,i) = 1.0 |
---|
| 885 | fwxm(j,i) = 0.0 |
---|
| 886 | fwxp(j,i) = 1.0 |
---|
| 887 | ELSEIF ( nzb_w_outer(j,i) > nzb_w_outer(j,i-1) ) THEN |
---|
| 888 | wall_e_x(j,i) = -1.0 ! left wall (location of adjacent fluid) |
---|
| 889 | wall_w_x(j,i) = 1.0 |
---|
| 890 | fwxm(j,i) = 1.0 |
---|
| 891 | fwxp(j,i) = 0.0 |
---|
| 892 | ENDIF |
---|
| 893 | ! |
---|
| 894 | !-- Wall and corner locations inside buildings for limitation of |
---|
| 895 | !-- near-wall mixing length l_wall |
---|
| 896 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j+1,i) ) THEN |
---|
| 897 | |
---|
| 898 | wall_n(j,i) = nzb_s_inner(j+1,i) + 1 ! North wall |
---|
| 899 | |
---|
| 900 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i-1) ) THEN |
---|
| 901 | corner_nl(j,i) = MAX( nzb_s_inner(j+1,i), & ! Northleft corner |
---|
| 902 | nzb_s_inner(j,i-1) ) + 1 |
---|
| 903 | ENDIF |
---|
| 904 | |
---|
| 905 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i+1) ) THEN |
---|
| 906 | corner_nr(j,i) = MAX( nzb_s_inner(j+1,i), & ! Northright corner |
---|
| 907 | nzb_s_inner(j,i+1) ) + 1 |
---|
| 908 | ENDIF |
---|
| 909 | |
---|
| 910 | ENDIF |
---|
| 911 | |
---|
| 912 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j-1,i) ) THEN |
---|
| 913 | |
---|
| 914 | wall_s(j,i) = nzb_s_inner(j-1,i) + 1 ! South wall |
---|
| 915 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i-1) ) THEN |
---|
| 916 | corner_sl(j,i) = MAX( nzb_s_inner(j-1,i), & ! Southleft corner |
---|
| 917 | nzb_s_inner(j,i-1) ) + 1 |
---|
| 918 | ENDIF |
---|
| 919 | |
---|
| 920 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i+1) ) THEN |
---|
| 921 | corner_sr(j,i) = MAX( nzb_s_inner(j-1,i), & ! Southright corner |
---|
| 922 | nzb_s_inner(j,i+1) ) + 1 |
---|
| 923 | ENDIF |
---|
| 924 | |
---|
| 925 | ENDIF |
---|
| 926 | |
---|
| 927 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i-1) ) THEN |
---|
| 928 | wall_l(j,i) = nzb_s_inner(j,i-1) + 1 ! Left wall |
---|
| 929 | ENDIF |
---|
| 930 | |
---|
| 931 | IF ( nzb_s_inner(j,i) > nzb_s_inner(j,i+1) ) THEN |
---|
| 932 | wall_r(j,i) = nzb_s_inner(j,i+1) + 1 ! Right wall |
---|
| 933 | ENDIF |
---|
| 934 | |
---|
| 935 | ENDDO |
---|
| 936 | ENDDO |
---|
| 937 | |
---|
| 938 | ! |
---|
[114] | 939 | !-- Calculate wall flag arrays for the multigrid method |
---|
| 940 | IF ( psolver == 'multigrid' ) THEN |
---|
| 941 | ! |
---|
| 942 | !-- Gridpoint increment of the current level |
---|
| 943 | inc = 1 |
---|
| 944 | |
---|
| 945 | DO l = maximum_grid_level, 1 , -1 |
---|
| 946 | |
---|
| 947 | nxl_l = nxl_mg(l) |
---|
| 948 | nxr_l = nxr_mg(l) |
---|
| 949 | nys_l = nys_mg(l) |
---|
| 950 | nyn_l = nyn_mg(l) |
---|
| 951 | nzt_l = nzt_mg(l) |
---|
| 952 | |
---|
| 953 | ! |
---|
| 954 | !-- Assign the flag level to be calculated |
---|
| 955 | SELECT CASE ( l ) |
---|
| 956 | CASE ( 1 ) |
---|
| 957 | flags => wall_flags_1 |
---|
| 958 | CASE ( 2 ) |
---|
| 959 | flags => wall_flags_2 |
---|
| 960 | CASE ( 3 ) |
---|
| 961 | flags => wall_flags_3 |
---|
| 962 | CASE ( 4 ) |
---|
| 963 | flags => wall_flags_4 |
---|
| 964 | CASE ( 5 ) |
---|
| 965 | flags => wall_flags_5 |
---|
| 966 | CASE ( 6 ) |
---|
| 967 | flags => wall_flags_6 |
---|
| 968 | CASE ( 7 ) |
---|
| 969 | flags => wall_flags_7 |
---|
| 970 | CASE ( 8 ) |
---|
| 971 | flags => wall_flags_8 |
---|
| 972 | CASE ( 9 ) |
---|
| 973 | flags => wall_flags_9 |
---|
| 974 | CASE ( 10 ) |
---|
| 975 | flags => wall_flags_10 |
---|
| 976 | END SELECT |
---|
| 977 | |
---|
| 978 | ! |
---|
| 979 | !-- Depending on the grid level, set the respective bits in case of |
---|
| 980 | !-- neighbouring walls |
---|
| 981 | !-- Bit 0: wall to the bottom |
---|
| 982 | !-- Bit 1: wall to the top (not realized in remaining PALM code so far) |
---|
| 983 | !-- Bit 2: wall to the south |
---|
| 984 | !-- Bit 3: wall to the north |
---|
| 985 | !-- Bit 4: wall to the left |
---|
| 986 | !-- Bit 5: wall to the right |
---|
[116] | 987 | !-- Bit 6: inside building |
---|
[114] | 988 | |
---|
| 989 | flags = 0 |
---|
| 990 | |
---|
| 991 | DO i = nxl_l-1, nxr_l+1 |
---|
| 992 | DO j = nys_l-1, nyn_l+1 |
---|
| 993 | DO k = nzb, nzt_l+1 |
---|
| 994 | |
---|
| 995 | ! |
---|
| 996 | !-- Inside/outside building (inside building does not need |
---|
| 997 | !-- further tests for walls) |
---|
| 998 | IF ( k*inc <= nzb_local(j*inc,i*inc) ) THEN |
---|
| 999 | |
---|
| 1000 | flags(k,j,i) = IBSET( flags(k,j,i), 6 ) |
---|
| 1001 | |
---|
| 1002 | ELSE |
---|
| 1003 | ! |
---|
| 1004 | !-- Bottom wall |
---|
| 1005 | IF ( (k-1)*inc <= nzb_local(j*inc,i*inc) ) THEN |
---|
| 1006 | flags(k,j,i) = IBSET( flags(k,j,i), 0 ) |
---|
| 1007 | ENDIF |
---|
| 1008 | ! |
---|
| 1009 | !-- South wall |
---|
| 1010 | IF ( k*inc <= nzb_local((j-1)*inc,i*inc) ) THEN |
---|
| 1011 | flags(k,j,i) = IBSET( flags(k,j,i), 2 ) |
---|
| 1012 | ENDIF |
---|
| 1013 | ! |
---|
| 1014 | !-- North wall |
---|
| 1015 | IF ( k*inc <= nzb_local((j+1)*inc,i*inc) ) THEN |
---|
| 1016 | flags(k,j,i) = IBSET( flags(k,j,i), 3 ) |
---|
| 1017 | ENDIF |
---|
| 1018 | ! |
---|
| 1019 | !-- Left wall |
---|
| 1020 | IF ( k*inc <= nzb_local(j*inc,(i-1)*inc) ) THEN |
---|
| 1021 | flags(k,j,i) = IBSET( flags(k,j,i), 4 ) |
---|
| 1022 | ENDIF |
---|
| 1023 | ! |
---|
| 1024 | !-- Right wall |
---|
| 1025 | IF ( k*inc <= nzb_local(j*inc,(i+1)*inc) ) THEN |
---|
| 1026 | flags(k,j,i) = IBSET( flags(k,j,i), 5 ) |
---|
| 1027 | ENDIF |
---|
| 1028 | |
---|
| 1029 | ENDIF |
---|
| 1030 | |
---|
| 1031 | ENDDO |
---|
| 1032 | ENDDO |
---|
[861] | 1033 | ENDDO |
---|
[114] | 1034 | |
---|
| 1035 | ! |
---|
| 1036 | !-- Test output of flag arrays |
---|
[145] | 1037 | ! i = nxl_l |
---|
| 1038 | ! WRITE (9,*) ' ' |
---|
| 1039 | ! WRITE (9,*) '*** mg level ', l, ' ***', mg_switch_to_pe0_level |
---|
| 1040 | ! WRITE (9,*) ' inc=', inc, ' i =', nxl_l |
---|
| 1041 | ! WRITE (9,*) ' nxl_l',nxl_l,' nxr_l=',nxr_l,' nys_l=',nys_l,' nyn_l=',nyn_l |
---|
| 1042 | ! DO k = nzt_l+1, nzb, -1 |
---|
| 1043 | ! WRITE (9,'(194(1X,I2))') ( flags(k,j,i), j = nys_l-1, nyn_l+1 ) |
---|
| 1044 | ! ENDDO |
---|
[114] | 1045 | |
---|
| 1046 | inc = inc * 2 |
---|
| 1047 | |
---|
| 1048 | ENDDO |
---|
| 1049 | |
---|
| 1050 | ENDIF |
---|
[861] | 1051 | ! |
---|
| 1052 | !-- Allocate flags needed for masking walls. |
---|
| 1053 | ALLOCATE( wall_flags_0(nzb:nzt,nys:nyn,nxl:nxr) ) |
---|
| 1054 | wall_flags_0 = 0 |
---|
[114] | 1055 | |
---|
[861] | 1056 | IF ( scalar_advec == 'ws-scheme' ) THEN |
---|
[114] | 1057 | ! |
---|
[861] | 1058 | !-- Set flags to steer the degradation of the advection scheme in advec_ws |
---|
| 1059 | !-- near topography, inflow- and outflow boundaries as well as bottom and |
---|
| 1060 | !-- top of model domain. wall_flags_0 remains zero for all non-prognostic |
---|
| 1061 | !-- grid points. |
---|
| 1062 | DO i = nxl, nxr |
---|
| 1063 | DO j = nys, nyn |
---|
| 1064 | DO k = nzb_s_inner(j,i)+1, nzt |
---|
| 1065 | ! |
---|
| 1066 | !-- scalar - x-direction |
---|
| 1067 | !-- WS1 (0), WS3 (1), WS5 (2) |
---|
| 1068 | IF ( k <= nzb_s_inner(j,i+1) .OR. ( outflow_l .AND. i == nxl ) & |
---|
| 1069 | .OR. ( outflow_r .AND. i == nxr ) ) THEN |
---|
| 1070 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 0 ) |
---|
| 1071 | ELSEIF ( k <= nzb_s_inner(j,i+2) .OR. k <= nzb_s_inner(j,i-1) & |
---|
| 1072 | .OR. ( outflow_r .AND. i == nxr-1 ) & |
---|
| 1073 | .OR. ( outflow_l .AND. i == nxlu ) ) THEN |
---|
| 1074 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 1 ) |
---|
| 1075 | ELSE |
---|
| 1076 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 2 ) |
---|
| 1077 | ENDIF |
---|
| 1078 | ! |
---|
| 1079 | !-- scalar - y-direction |
---|
| 1080 | !-- WS1 (3), WS3 (4), WS5 (5) |
---|
| 1081 | IF ( k <= nzb_s_inner(j+1,i) .OR. ( outflow_s .AND. j == nys ) & |
---|
| 1082 | .OR. ( outflow_n .AND. j == nyn ) ) THEN |
---|
| 1083 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 3 ) |
---|
| 1084 | !-- WS3 |
---|
| 1085 | ELSEIF ( k <= nzb_s_inner(j+2,i) .OR. k <= nzb_s_inner(j-1,i) & |
---|
| 1086 | .OR. ( outflow_s .AND. j == nysv ) & |
---|
| 1087 | .OR. ( outflow_n .AND. j == nyn-1 ) ) THEN |
---|
| 1088 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 4 ) |
---|
| 1089 | !-- WS5 |
---|
| 1090 | ELSE |
---|
| 1091 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 5 ) |
---|
| 1092 | ENDIF |
---|
| 1093 | ! |
---|
| 1094 | !-- scalar - z-direction |
---|
| 1095 | !-- WS1 (6), WS3 (7), WS5 (8) |
---|
| 1096 | flag_set = .FALSE. |
---|
| 1097 | IF ( k == nzb_s_inner(j,i) + 1 .OR. k == nzt ) THEN |
---|
| 1098 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 6 ) |
---|
| 1099 | flag_set = .TRUE. |
---|
| 1100 | ELSEIF ( k == nzb_s_inner(j,i) + 2 .OR. k == nzt - 1 ) THEN |
---|
| 1101 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 7 ) |
---|
| 1102 | flag_set = .TRUE. |
---|
| 1103 | ELSEIF ( k > nzb_s_inner(j,i) .AND. .NOT. flag_set ) THEN |
---|
| 1104 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 8 ) |
---|
| 1105 | ENDIF |
---|
| 1106 | ENDDO |
---|
| 1107 | ENDDO |
---|
| 1108 | ENDDO |
---|
| 1109 | ENDIF |
---|
| 1110 | |
---|
| 1111 | IF ( momentum_advec == 'ws-scheme' ) THEN |
---|
| 1112 | ! |
---|
| 1113 | !-- Set wall_flags_0 to steer the degradation of the advection scheme in advec_ws |
---|
| 1114 | !-- near topography, inflow- and outflow boundaries as well as bottom and |
---|
| 1115 | !-- top of model domain. wall_flags_0 remains zero for all non-prognostic |
---|
| 1116 | !-- grid points. |
---|
| 1117 | DO i = nxl, nxr |
---|
| 1118 | DO j = nys, nyn |
---|
| 1119 | DO k = nzb_u_inner(j,i)+1, nzt |
---|
| 1120 | ! |
---|
| 1121 | !-- u component - x-direction |
---|
| 1122 | !-- WS1 (9), WS3 (10), WS5 (11) |
---|
| 1123 | IF ( k <= nzb_u_inner(j,i+1) & |
---|
| 1124 | .OR. ( outflow_r .AND. i == nxr ) ) THEN |
---|
| 1125 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 9 ) |
---|
| 1126 | ELSEIF ( k <= nzb_u_inner(j,i+2) .OR. k <= nzb_u_inner(j,i-1) & |
---|
| 1127 | .OR. ( outflow_r .AND. i == nxr-1 ) & |
---|
| 1128 | .OR. ( outflow_l .AND. i == nxlu ) ) THEN |
---|
| 1129 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 10 ) |
---|
| 1130 | ELSE |
---|
| 1131 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 11 ) |
---|
| 1132 | ENDIF |
---|
| 1133 | ! |
---|
| 1134 | !-- u component - y-direction |
---|
| 1135 | !-- WS1 (12), WS3 (13), WS5 (14) |
---|
| 1136 | IF ( k <= nzb_u_inner(j+1,i) .OR. ( outflow_s .AND. j == nys ) & |
---|
| 1137 | .OR. ( outflow_n .AND. j == nyn ) ) THEN |
---|
| 1138 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 12 ) |
---|
| 1139 | ELSEIF ( k <= nzb_u_inner(j+2,i) .OR. k <= nzb_u_inner(j-1,i) & |
---|
| 1140 | .OR. ( outflow_s .AND. j == nysv ) & |
---|
| 1141 | .OR. ( outflow_n .AND. j == nyn-1 ) ) THEN |
---|
| 1142 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 13 ) |
---|
| 1143 | ELSE |
---|
| 1144 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 14 ) |
---|
| 1145 | ENDIF |
---|
| 1146 | ! |
---|
| 1147 | !-- u component - z-direction |
---|
| 1148 | !-- WS1 (15), WS3 (16), WS5 (17) |
---|
| 1149 | flag_set = .FALSE. |
---|
| 1150 | IF ( k == nzb_u_inner(j,i) + 1 .OR. k == nzt ) THEN |
---|
| 1151 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 15 ) |
---|
| 1152 | flag_set = .TRUE. |
---|
| 1153 | ELSEIF ( k == nzb_u_inner(j,i) + 2 .OR. k == nzt - 1 ) THEN |
---|
| 1154 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 16 ) |
---|
| 1155 | flag_set = .TRUE. |
---|
| 1156 | ELSEIF ( k > nzb_u_inner(j,i) .AND. .NOT. flag_set ) THEN |
---|
| 1157 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 17 ) |
---|
| 1158 | ENDIF |
---|
| 1159 | |
---|
| 1160 | ENDDO |
---|
| 1161 | ENDDO |
---|
| 1162 | ENDDO |
---|
| 1163 | |
---|
| 1164 | DO i = nxl, nxr |
---|
| 1165 | DO j = nys, nyn |
---|
| 1166 | DO k = nzb_v_inner(j,i)+1, nzt |
---|
| 1167 | ! |
---|
| 1168 | !-- v component - x-direction |
---|
| 1169 | !-- WS1 (18), WS3 (19), WS5 (20) |
---|
| 1170 | IF ( k <= nzb_v_inner(j,i+1) .OR. ( outflow_l .AND. i == nxl ) & |
---|
| 1171 | .OR. ( outflow_r .AND. i == nxr ) ) THEN |
---|
| 1172 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 18 ) |
---|
| 1173 | !-- WS3 |
---|
| 1174 | ELSEIF ( k <= nzb_v_inner(j,i+2) .OR. k <= nzb_v_inner(j,i-1) & |
---|
| 1175 | .OR. ( outflow_r .AND. i == nxr-1 ) & |
---|
| 1176 | .OR. ( outflow_l .AND. i == nxlu ) ) THEN |
---|
| 1177 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 19 ) |
---|
| 1178 | ELSE |
---|
| 1179 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 20 ) |
---|
| 1180 | ENDIF |
---|
| 1181 | ! |
---|
| 1182 | !-- v component - y-direction |
---|
| 1183 | !-- WS1 (21), WS3 (22), WS5 (23) |
---|
| 1184 | IF ( k <= nzb_v_inner(j+1,i) & |
---|
| 1185 | .OR. ( outflow_n .AND. j == nyn ) ) THEN |
---|
| 1186 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 21 ) |
---|
| 1187 | ELSEIF ( k <= nzb_v_inner(j+2,i) .OR. k <= nzb_v_inner(j-1,i) & |
---|
| 1188 | .OR. ( outflow_s .AND. j == nysv ) & |
---|
| 1189 | .OR. ( outflow_n .AND. j == nyn-1 ) ) THEN |
---|
| 1190 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 22 ) |
---|
| 1191 | ELSE |
---|
| 1192 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 23 ) |
---|
| 1193 | ENDIF |
---|
| 1194 | ! |
---|
| 1195 | !-- v component - z-direction |
---|
| 1196 | !-- WS1 (24), WS3 (25), WS5 (26) |
---|
| 1197 | flag_set = .FALSE. |
---|
| 1198 | IF ( k == nzb_v_inner(j,i) + 1 .OR. k == nzt ) THEN |
---|
| 1199 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 24 ) |
---|
| 1200 | flag_set = .TRUE. |
---|
| 1201 | ELSEIF ( k == nzb_v_inner(j,i) + 2 .OR. k == nzt - 1 ) THEN |
---|
| 1202 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 25 ) |
---|
| 1203 | flag_set = .TRUE. |
---|
| 1204 | ELSEIF ( k > nzb_v_inner(j,i) .AND. .NOT. flag_set ) THEN |
---|
| 1205 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 26 ) |
---|
| 1206 | ENDIF |
---|
| 1207 | |
---|
| 1208 | ENDDO |
---|
| 1209 | ENDDO |
---|
| 1210 | ENDDO |
---|
| 1211 | DO i = nxl, nxr |
---|
| 1212 | DO j = nys, nyn |
---|
| 1213 | DO k = nzb_w_inner(j,i)+1, nzt |
---|
| 1214 | ! |
---|
| 1215 | !-- w component - x-direction |
---|
| 1216 | !-- WS1 (27), WS3 (28), WS5 (29) |
---|
| 1217 | IF ( k <= nzb_w_inner(j,i+1) .OR. ( outflow_l .AND. i == nxl ) & |
---|
| 1218 | .OR. ( outflow_r .AND. i == nxr ) ) THEN |
---|
| 1219 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 27 ) |
---|
| 1220 | ELSEIF ( k <= nzb_w_inner(j,i+2) .OR. k <= nzb_w_inner(j,i-1) & |
---|
| 1221 | .OR. ( outflow_r .AND. i == nxr-1 ) & |
---|
| 1222 | .OR. ( outflow_l .AND. i == nxlu ) ) THEN |
---|
| 1223 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 28 ) |
---|
| 1224 | ELSE |
---|
| 1225 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i),29 ) |
---|
| 1226 | ENDIF |
---|
| 1227 | ! |
---|
| 1228 | !-- w component - y-direction |
---|
| 1229 | !-- WS1 (30), WS3 (31), WS5 (32) |
---|
| 1230 | IF ( k <= nzb_w_inner(j+1,i) .OR. ( outflow_s .AND. j == nys ) & |
---|
| 1231 | .OR. ( outflow_n .AND. j == nyn ) ) THEN |
---|
| 1232 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 30 ) |
---|
| 1233 | ELSEIF ( k <= nzb_w_inner(j+2,i) .OR. k <= nzb_w_inner(j-1,i) & |
---|
| 1234 | .OR. ( outflow_s .AND. j == nysv ) & |
---|
| 1235 | .OR. ( outflow_n .AND. j == nyn-1 ) ) THEN |
---|
| 1236 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 31 ) |
---|
| 1237 | ELSE |
---|
| 1238 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 32 ) |
---|
| 1239 | ENDIF |
---|
| 1240 | ! |
---|
| 1241 | !-- w component - z-direction |
---|
| 1242 | !-- WS1 (33), WS3 (34), WS5 (35) |
---|
| 1243 | flag_set = .FALSE. |
---|
| 1244 | IF ( k == nzb_w_inner(j,i) .OR. k == nzb_w_inner(j,i) + 1 & |
---|
| 1245 | .OR. k == nzt ) THEN |
---|
| 1246 | ! |
---|
| 1247 | !-- Please note, at k == nzb_w_inner(j,i) a flag is explictely |
---|
| 1248 | !-- set, although this is not a prognostic level. However, |
---|
| 1249 | !-- contrary to the advection of u,v and s this is necessary |
---|
| 1250 | !-- because flux_t(nzb_w_inner(j,i)) is used for the tendency |
---|
| 1251 | !-- at k == nzb_w_inner(j,i)+1. |
---|
| 1252 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 33 ) |
---|
| 1253 | flag_set = .TRUE. |
---|
| 1254 | ELSEIF ( k == nzb_w_inner(j,i) + 2 .OR. k == nzt - 1 ) THEN |
---|
| 1255 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 34 ) |
---|
| 1256 | flag_set = .TRUE. |
---|
| 1257 | ELSEIF ( k > nzb_w_inner(j,i) .AND. .NOT. flag_set ) THEN |
---|
| 1258 | wall_flags_0(k,j,i) = IBSET( wall_flags_0(k,j,i), 35 ) |
---|
| 1259 | ENDIF |
---|
| 1260 | |
---|
| 1261 | ENDDO |
---|
| 1262 | ENDDO |
---|
| 1263 | ENDDO |
---|
| 1264 | |
---|
| 1265 | ENDIF |
---|
| 1266 | |
---|
| 1267 | ! |
---|
[1] | 1268 | !-- In case of topography: limit near-wall mixing length l_wall further: |
---|
| 1269 | !-- Go through all points of the subdomain one by one and look for the closest |
---|
| 1270 | !-- surface |
---|
| 1271 | IF ( TRIM(topography) /= 'flat' ) THEN |
---|
| 1272 | DO i = nxl, nxr |
---|
| 1273 | DO j = nys, nyn |
---|
| 1274 | |
---|
| 1275 | nzb_si = nzb_s_inner(j,i) |
---|
| 1276 | vi = vertical_influence(nzb_si) |
---|
| 1277 | |
---|
| 1278 | IF ( wall_n(j,i) > 0 ) THEN |
---|
| 1279 | ! |
---|
| 1280 | !-- North wall (y distance) |
---|
| 1281 | DO k = wall_n(j,i), nzb_si |
---|
| 1282 | l_wall(k,j+1,i) = MIN( l_wall(k,j+1,i), 0.5 * dy ) |
---|
| 1283 | ENDDO |
---|
| 1284 | ! |
---|
| 1285 | !-- Above North wall (yz distance) |
---|
| 1286 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1287 | l_wall(k,j+1,i) = MIN( l_wall(k,j+1,i), & |
---|
| 1288 | SQRT( 0.25 * dy**2 + & |
---|
| 1289 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1290 | ENDDO |
---|
| 1291 | ! |
---|
| 1292 | !-- Northleft corner (xy distance) |
---|
| 1293 | IF ( corner_nl(j,i) > 0 ) THEN |
---|
| 1294 | DO k = corner_nl(j,i), nzb_si |
---|
| 1295 | l_wall(k,j+1,i-1) = MIN( l_wall(k,j+1,i-1), & |
---|
| 1296 | 0.5 * SQRT( dx**2 + dy**2 ) ) |
---|
| 1297 | ENDDO |
---|
| 1298 | ! |
---|
| 1299 | !-- Above Northleft corner (xyz distance) |
---|
| 1300 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1301 | l_wall(k,j+1,i-1) = MIN( l_wall(k,j+1,i-1), & |
---|
| 1302 | SQRT( 0.25 * (dx**2 + dy**2) + & |
---|
| 1303 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1304 | ENDDO |
---|
| 1305 | ENDIF |
---|
| 1306 | ! |
---|
| 1307 | !-- Northright corner (xy distance) |
---|
| 1308 | IF ( corner_nr(j,i) > 0 ) THEN |
---|
| 1309 | DO k = corner_nr(j,i), nzb_si |
---|
| 1310 | l_wall(k,j+1,i+1) = MIN( l_wall(k,j+1,i+1), & |
---|
| 1311 | 0.5 * SQRT( dx**2 + dy**2 ) ) |
---|
| 1312 | ENDDO |
---|
| 1313 | ! |
---|
| 1314 | !-- Above northright corner (xyz distance) |
---|
| 1315 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1316 | l_wall(k,j+1,i+1) = MIN( l_wall(k,j+1,i+1), & |
---|
| 1317 | SQRT( 0.25 * (dx**2 + dy**2) + & |
---|
| 1318 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1319 | ENDDO |
---|
| 1320 | ENDIF |
---|
| 1321 | ENDIF |
---|
| 1322 | |
---|
| 1323 | IF ( wall_s(j,i) > 0 ) THEN |
---|
| 1324 | ! |
---|
| 1325 | !-- South wall (y distance) |
---|
| 1326 | DO k = wall_s(j,i), nzb_si |
---|
| 1327 | l_wall(k,j-1,i) = MIN( l_wall(k,j-1,i), 0.5 * dy ) |
---|
| 1328 | ENDDO |
---|
| 1329 | ! |
---|
| 1330 | !-- Above south wall (yz distance) |
---|
| 1331 | DO k = nzb_si + 1, & |
---|
| 1332 | nzb_si + vi |
---|
| 1333 | l_wall(k,j-1,i) = MIN( l_wall(k,j-1,i), & |
---|
| 1334 | SQRT( 0.25 * dy**2 + & |
---|
| 1335 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1336 | ENDDO |
---|
| 1337 | ! |
---|
| 1338 | !-- Southleft corner (xy distance) |
---|
| 1339 | IF ( corner_sl(j,i) > 0 ) THEN |
---|
| 1340 | DO k = corner_sl(j,i), nzb_si |
---|
| 1341 | l_wall(k,j-1,i-1) = MIN( l_wall(k,j-1,i-1), & |
---|
| 1342 | 0.5 * SQRT( dx**2 + dy**2 ) ) |
---|
| 1343 | ENDDO |
---|
| 1344 | ! |
---|
| 1345 | !-- Above southleft corner (xyz distance) |
---|
| 1346 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1347 | l_wall(k,j-1,i-1) = MIN( l_wall(k,j-1,i-1), & |
---|
| 1348 | SQRT( 0.25 * (dx**2 + dy**2) + & |
---|
| 1349 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1350 | ENDDO |
---|
| 1351 | ENDIF |
---|
| 1352 | ! |
---|
| 1353 | !-- Southright corner (xy distance) |
---|
| 1354 | IF ( corner_sr(j,i) > 0 ) THEN |
---|
| 1355 | DO k = corner_sr(j,i), nzb_si |
---|
| 1356 | l_wall(k,j-1,i+1) = MIN( l_wall(k,j-1,i+1), & |
---|
| 1357 | 0.5 * SQRT( dx**2 + dy**2 ) ) |
---|
| 1358 | ENDDO |
---|
| 1359 | ! |
---|
| 1360 | !-- Above southright corner (xyz distance) |
---|
| 1361 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1362 | l_wall(k,j-1,i+1) = MIN( l_wall(k,j-1,i+1), & |
---|
| 1363 | SQRT( 0.25 * (dx**2 + dy**2) + & |
---|
| 1364 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1365 | ENDDO |
---|
| 1366 | ENDIF |
---|
| 1367 | |
---|
| 1368 | ENDIF |
---|
| 1369 | |
---|
| 1370 | IF ( wall_l(j,i) > 0 ) THEN |
---|
| 1371 | ! |
---|
| 1372 | !-- Left wall (x distance) |
---|
| 1373 | DO k = wall_l(j,i), nzb_si |
---|
| 1374 | l_wall(k,j,i-1) = MIN( l_wall(k,j,i-1), 0.5 * dx ) |
---|
| 1375 | ENDDO |
---|
| 1376 | ! |
---|
| 1377 | !-- Above left wall (xz distance) |
---|
| 1378 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1379 | l_wall(k,j,i-1) = MIN( l_wall(k,j,i-1), & |
---|
| 1380 | SQRT( 0.25 * dx**2 + & |
---|
| 1381 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1382 | ENDDO |
---|
| 1383 | ENDIF |
---|
| 1384 | |
---|
| 1385 | IF ( wall_r(j,i) > 0 ) THEN |
---|
| 1386 | ! |
---|
| 1387 | !-- Right wall (x distance) |
---|
| 1388 | DO k = wall_r(j,i), nzb_si |
---|
| 1389 | l_wall(k,j,i+1) = MIN( l_wall(k,j,i+1), 0.5 * dx ) |
---|
| 1390 | ENDDO |
---|
| 1391 | ! |
---|
| 1392 | !-- Above right wall (xz distance) |
---|
| 1393 | DO k = nzb_si + 1, nzb_si + vi |
---|
| 1394 | l_wall(k,j,i+1) = MIN( l_wall(k,j,i+1), & |
---|
| 1395 | SQRT( 0.25 * dx**2 + & |
---|
| 1396 | ( zu(k) - zw(nzb_si) )**2 ) ) |
---|
| 1397 | ENDDO |
---|
| 1398 | |
---|
| 1399 | ENDIF |
---|
| 1400 | |
---|
| 1401 | ENDDO |
---|
| 1402 | ENDDO |
---|
| 1403 | |
---|
| 1404 | ENDIF |
---|
| 1405 | |
---|
| 1406 | ! |
---|
| 1407 | !-- Multiplication with wall_adjustment_factor |
---|
| 1408 | l_wall = wall_adjustment_factor * l_wall |
---|
| 1409 | |
---|
| 1410 | ! |
---|
[709] | 1411 | !-- Set lateral boundary conditions for l_wall |
---|
[667] | 1412 | CALL exchange_horiz( l_wall, nbgp ) |
---|
| 1413 | |
---|
[1] | 1414 | DEALLOCATE( corner_nl, corner_nr, corner_sl, corner_sr, nzb_local, & |
---|
| 1415 | nzb_tmp, vertical_influence, wall_l, wall_n, wall_r, wall_s ) |
---|
| 1416 | |
---|
[807] | 1417 | #endif |
---|
[1] | 1418 | |
---|
| 1419 | END SUBROUTINE init_grid |
---|