Home

Context Navigation

source: palm/trunk/SOURCE/init_grid.f90 @ 4690

Last change on this file since 4690 was 4653, checked in by pavelkrc, 4 years ago
Radiation Transfer Model version 4.0
Property svn:keywords set to `Id`
File size: 114.9 KB

Rev	Line
[1682]	1	!> @file init_grid.f90
[4648]	2	!--------------------------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[4648]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[1036]	8	!
[4648]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[1036]	12	!
[4648]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[1036]	15	!
[4360]	16	! Copyright 1997-2020 Leibniz Universitaet Hannover
[4648]	17	!--------------------------------------------------------------------------------------------------!
[1036]	18	!
[254]	19	! Current revisions:
[1]	20	! -----------------
[4601]	21	!
	22	!
[2233]	23	! Former revisions:
	24	! -----------------
	25	! $Id: init_grid.f90 4653 2020-08-27 08:54:43Z suehring $
[4648]	26	! file re-formatted to follow the PALM coding standard
	27	!
	28	! 4630 2020-07-30 14:54:34Z suehring
[4630]	29	! In case of ASCII topography input flag grid points as terrain and building.
	30	!
	31	! 4601 2020-07-14 12:06:09Z suehring
[4601]	32	! Minor formatting adjustments
[4648]	33	!
[4601]	34	! 4564 2020-06-12 14:03:36Z raasch
[4564]	35	! Vertical nesting method of Huq et al. (2019) removed
[4648]	36	!
[4564]	37	! 4543 2020-05-20 14:12:22Z gronemeier
[4543]	38	! Remove non-required check for canyon height
[4648]	39	!
[4543]	40	! 4507 2020-04-22 18:21:45Z gronemeier
[4507]	41	! update origin_z with shifting height of orography (oro_min)
[4648]	42	!
[4507]	43	! 4457 2020-03-11 14:20:43Z raasch
[4457]	44	! use statement for exchange horiz added,
	45	! bugfix for call of exchange horiz 2d
[4648]	46	!
[4457]	47	! 4444 2020-03-05 15:59:50Z raasch
[4444]	48	! bugfix: cpp-directives for serial mode added
[4648]	49	!
[4444]	50	! 4414 2020-02-19 20:16:04Z suehring
[4414]	51	! - Remove deprecated topography arrays nzb_s_inner, nzb_u_inner, etc.
[4648]	52	! - Move initialization of boundary conditions and multigrid into an extra module interface.
	53	!
[4414]	54	! 4386 2020-01-27 15:07:30Z Giersch
[4648]	55	! Allocation statements, comments, naming of variables revised and _wp added to real type values
	56	!
[4386]	57	! 4360 2020-01-07 11:25:50Z suehring
[4356]	58	! Revise error messages for generic tunnel setup.
[4648]	59	!
[4356]	60	! 4346 2019-12-18 11:55:56Z motisi
[4648]	61	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
	62	! information used in wall_flags_static_0
	63	!
[4346]	64	! 4340 2019-12-16 08:17:03Z Giersch
[4340]	65	! Topography closed channel flow with symmetric boundaries implemented
[4648]	66	!
[4340]	67	! 4329 2019-12-10 15:46:36Z motisi
[4329]	68	! Renamed wall_flags_0 to wall_flags_static_0
[4648]	69	!
[4329]	70	! 4328 2019-12-09 18:53:04Z suehring
[4328]	71	! Minor change in nzb_max computation. Commentation added.
[4648]	72	!
[4328]	73	! 4314 2019-11-29 10:29:20Z suehring
[4648]	74	! Set additional topography flag 4 to mark topography grid points emerged from the filtering process.
	75	!
[4314]	76	! 4294 2019-11-13 18:34:16Z suehring
[4648]	77	! Bugfix, always set bit 5 and 6 of wall_flags, indicating terrain- and building surfaces in all
	78	! cases, in order to enable terrain-following output also when no land- or urban-surface model is
	79	! applied.
	80	!
[4294]	81	! 4265 2019-10-15 16:16:24Z suehring
[4648]	82	! Bugfix for last commit, exchange oro_max variable only when it is allocated (not necessarily the
	83	! case when topography is input from ASCII file).
	84	!
[4265]	85	! 4245 2019-09-30 08:40:37Z pavelkrc
[4245]	86	! Store oro_max (building z-offset) in 2D for building surfaces
[4648]	87	!
[4245]	88	! 4189 2019-08-26 16:19:38Z suehring
[4189]	89	! - Add check for proper setting of namelist parameter topography
	90	! - Set flag to indicate land surfaces in case no topography is provided
[4648]	91	!
[4189]	92	! 4182 2019-08-22 15:20:23Z scharf
[4182]	93	! Corrected "Former revisions" section
[4648]	94	!
[4182]	95	! 4168 2019-08-16 13:50:17Z suehring
[4648]	96	! Pre-calculate topography top index and store it on an array (replaces former functions
	97	! get_topography_top_index)
	98	!
[4168]	99	! 4159 2019-08-15 13:31:35Z suehring
[4648]	100	! Revision of topography processing. This was not consistent between 2D and 3D buildings.
	101	!
[4159]	102	! 4144 2019-08-06 09:11:47Z raasch
[4144]	103	! relational operators .EQ., .NE., etc. replaced by ==, /=, etc.
[4648]	104	!
[4144]	105	! 4115 2019-07-24 12:50:49Z suehring
[4648]	106	! Bugfix in setting near-surface flag 24, inidicating wall-bounded grid points
	107	!
[4115]	108	! 4110 2019-07-22 17:05:21Z suehring
[4110]	109	! - Separate initialization of advection flags for momentum and scalars.
	110	! - Change subroutine interface for ws_init_flags_scalar to pass boundary flags
[4648]	111	!
[4110]	112	! 4109 2019-07-22 17:00:34Z suehring
[3927]	113	! Fix bad commit
[4648]	114	!
[3927]	115	! 3926 2019-04-23 12:56:42Z suehring
[4648]	116	! Minor bugfix in building mapping when all building IDs in the model domain are missing
	117	!
[3925]	118	! 3857 2019-04-03 13:00:16Z knoop
[4648]	119	! In projection of non-building 3D objects onto numerical grid remove dependency on building_type
	120	!
[3855]	121	! 3763 2019-02-25 17:33:49Z suehring
[4648]	122	! Replace work-around for ghost point exchange of 1-byte arrays with specific routine as already
	123	! done in other routines
	124	!
[3763]	125	! 3761 2019-02-25 15:31:42Z raasch
[3761]	126	! unused variables removed
[4648]	127	!
[3761]	128	! 3661 2019-01-08 18:22:50Z suehring
[4648]	129	! Remove setting of nzb_max to nzt at non-cyclic boundary PEs, instead, order degradation of
	130	! advection scheme is handeled directly in advec_ws
	131	!
[3661]	132	! 3655 2019-01-07 16:51:22Z knoop
[3538]	133	! Comment added
[2716]	134	!
[4182]	135	! Revision 1.1 1997/08/11 06:17:45 raasch
	136	! Initial revision (Testversion)
	137	!
	138	!
[1]	139	! Description:
[4648]	140	! -------------------------------------------------------------------------------------------------!
[1682]	141	!> Creating grid depending constants
[2696]	142	!> @todo: Rearrange topo flag list
[4648]	143	!> @todo: reference 3D buildings on top of orography is not tested and may need further improvement
	144	!> for steep slopes
	145	!> @todo: Use more advanced setting of building type at filled holes
	146	!--------------------------------------------------------------------------------------------------!
[1682]	147	SUBROUTINE init_grid
[1]	148
[4648]	149	USE arrays_3d, &
[3857]	150	ONLY: dd2zu, ddzu, ddzu_pres, ddzw, dzu, dzw, x, xu, y, yv, zu, zw
[4414]	151
[4648]	152	USE control_parameters, &
	153	ONLY: constant_flux_layer, dz, dz_max, dz_stretch_factor, &
	154	dz_stretch_factor_array, dz_stretch_level, dz_stretch_level_end, &
	155	dz_stretch_level_end_index, dz_stretch_level_start_index, &
	156	dz_stretch_level_start, ibc_uv_b, message_string, &
	157	number_stretch_level_end, &
	158	number_stretch_level_start, &
	159	ocean_mode, &
	160	psolver, &
	161	symmetry_flag, &
	162	topography, &
[4414]	163	use_surface_fluxes
	164
[4648]	165	USE grid_variables, &
[2232]	166	ONLY: ddx, ddx2, ddy, ddy2, dx, dx2, dy, dy2, zu_s_inner, zw_w_inner
[4414]	167
[4648]	168	USE indices, &
	169	ONLY: nbgp, &
	170	nx, &
	171	nxl, &
	172	nxlg, &
	173	nxr, &
	174	nxrg, &
	175	ny, &
	176	nyn, &
	177	nyng, &
	178	nys, &
	179	nysg, &
	180	nz, &
	181	nzb, &
	182	nzb_diff, &
	183	nzb_max, &
	184	nzt, &
	185	topo_top_ind, &
[4414]	186	topo_min_level
	187
[1320]	188	USE kinds
[2696]	189
[1]	190	USE pegrid
	191
	192	IMPLICIT NONE
	193
[4648]	194	INTEGER(iwp) :: i !< index variable along x
[3182]	195	INTEGER(iwp) :: j !< index variable along y
	196	INTEGER(iwp) :: k !< index variable along z
	197	INTEGER(iwp) :: k_top !< topography top index on local PE
	198	INTEGER(iwp) :: n !< loop variable for stretching
[4648]	199	INTEGER(iwp) :: number_dz !< number of user-specified dz values
[3182]	200	INTEGER(iwp) :: nzb_local_max !< vertical grid index of maximum topography height
	201	INTEGER(iwp) :: nzb_local_min !< vertical grid index of minimum topography height
[1]	202
[2696]	203	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo !< input array for 3D topography and dummy array for setting "outer"-flags
[2232]	204
[3065]	205	REAL(wp) :: dz_level_end !< distance between calculated height level for u/v-grid and user-specified end level for stretching
[1886]	206	REAL(wp) :: dz_stretched !< stretched vertical grid spacing
[861]	207
[4648]	208	REAL(wp), DIMENSION(:), ALLOCATABLE :: min_dz_stretch_level_end !< Array that contains all minimum heights where the stretching
	209	!< can end
[1]	210
[4648]	211
[1]	212	!
[709]	213	!-- Calculation of horizontal array bounds including ghost layers
[667]	214	nxlg = nxl - nbgp
	215	nxrg = nxr + nbgp
	216	nysg = nys - nbgp
	217	nyng = nyn + nbgp
[709]	218
[667]	219	!
[1]	220	!-- Allocate grid arrays
[4386]	221	ALLOCATE( x(0:nx) )
	222	ALLOCATE( xu(0:nx) )
[4648]	223
[3857]	224	DO i = 0, nx
	225	xu(i) = i * dx
	226	x(i) = i * dx + 0.5_wp * dx
	227	ENDDO
	228
[4386]	229	ALLOCATE( y(0:ny) )
	230	ALLOCATE( yv(0:ny) )
[4648]	231
[3857]	232	DO j = 0, ny
	233	yv(j) = j * dy
	234	y(j) = j * dy + 0.5_wp * dy
	235	ENDDO
	236
[4386]	237	ALLOCATE( ddzu(1:nzt+1) )
	238	ALLOCATE( ddzw(1:nzt+1) )
	239	ALLOCATE( dd2zu(1:nzt) )
	240	ALLOCATE( dzu(1:nzt+1) )
	241	ALLOCATE( dzw(1:nzt+1) )
	242	ALLOCATE( zu(nzb:nzt+1) )
	243	ALLOCATE( zw(nzb:nzt+1) )
[1]	244
	245	!
[4648]	246	!-- For constructing an appropriate grid, the vertical grid spacing dz has to be specified with a
	247	!-- non-negative value in the parameter file.
[3065]	248	IF ( dz(1) == -1.0_wp ) THEN
[254]	249	message_string = 'missing dz'
[4648]	250	CALL message( 'init_grid', 'PA0200', 1, 2, 0, 6, 0 )
[3065]	251	ELSEIF ( dz(1) <= 0.0_wp ) THEN
	252	WRITE( message_string, * ) 'dz=',dz(1),' <= 0.0'
[254]	253	CALL message( 'init_grid', 'PA0201', 1, 2, 0, 6, 0 )
[1]	254	ENDIF
[94]	255
[1]	256	!
[4648]	257	!-- Initialize dz_stretch_level_start with the value of dz_stretch_level if it was set by the user.
[3065]	258	IF ( dz_stretch_level /= -9999999.9_wp ) THEN
	259	dz_stretch_level_start(1) = dz_stretch_level
	260	ENDIF
[4648]	261
[3065]	262	!
[4648]	263	!-- Determine number of dz values and stretching levels specified by the user to allow right
	264	!-- controlling of the stretching mechanism and to perform error checks. The additional requirement
	265	!-- that dz /= dz_max for counting number of user-specified dz values is necessary. Otherwise
	266	!-- restarts would abort if the old stretching mechanism with dz_stretch_level is used (Attention:
	267	!-- The user is not allowed to specify a dz value equal to the default of dz_max = 999.0).
	268	number_dz = COUNT( dz /= -1.0_wp .AND. dz /= dz_max)
	269	number_stretch_level_start = COUNT( dz_stretch_level_start /= -9999999.9_wp )
	270	number_stretch_level_end = COUNT( dz_stretch_level_end /= 9999999.9_wp )
[3065]	271
	272	!
[4648]	273	!-- The number of specified end levels +1 has to be the same as the number
[3065]	274	!-- of specified dz values
	275	IF ( number_dz /= number_stretch_level_end + 1 ) THEN
[4648]	276	WRITE( message_string, * ) 'The number of values for dz = ', number_dz, &
	277	'has to be the same as& ', 'the number of values for ', &
	278	'dz_stretch_level_end + 1 = ', number_stretch_level_end+1
[4601]	279	CALL message( 'init_grid', 'PA0156', 1, 2, 0, 6, 0 )
[3065]	280	ENDIF
[4648]	281
[3065]	282	!
[4648]	283	!-- The number of specified start levels has to be the same or one less than the number of specified
	284	!-- dz values
	285	IF ( number_dz /= number_stretch_level_start + 1 .AND. &
	286	number_dz /= number_stretch_level_start ) THEN
	287	WRITE( message_string, * ) 'The number of values for dz = ', number_dz, &
	288	'has to be the same as or one ', &
	289	'more than& the number of values for ', &
	290	'dz_stretch_level_start = ', number_stretch_level_start
[4601]	291	CALL message( 'init_grid', 'PA0211', 1, 2, 0, 6, 0 )
[3065]	292	ENDIF
[4648]	293
	294	!-- The number of specified start levels has to be the same or one more than the number of specified
	295	!-- end levels
	296	IF ( number_stretch_level_start /= number_stretch_level_end + 1 .AND. &
[3065]	297	number_stretch_level_start /= number_stretch_level_end ) THEN
[4648]	298	WRITE( message_string, * ) 'The number of values for ', &
	299	'dz_stretch_level_start = ', dz_stretch_level_start, &
	300	'has to be the ', 'same or one more than& the number of ', &
	301	'values for dz_stretch_level_end = ', number_stretch_level_end
[4601]	302	CALL message( 'init_grid', 'PA0216', 1, 2, 0, 6, 0 )
[3065]	303	ENDIF
	304
	305	!
	306	!-- Initialize dz for the free atmosphere with the value of dz_max
[4648]	307	IF ( dz(number_stretch_level_start+1) == -1.0_wp .AND. number_stretch_level_start /= 0 ) THEN
[3065]	308	dz(number_stretch_level_start+1) = dz_max
	309	ENDIF
[4648]	310
[3065]	311	!
[4648]	312	!-- Initialize the stretching factor if (infinitely) stretching in the free atmosphere is desired
	313	!-- (dz_stretch_level_end was not specified for the free atmosphere)
	314	IF ( number_stretch_level_start == number_stretch_level_end + 1 ) THEN
	315	dz_stretch_factor_array(number_stretch_level_start) = dz_stretch_factor
[3065]	316	ENDIF
[4648]	317
[3065]	318	!
	319	!-- Allocation of arrays for stretching
	320	ALLOCATE( min_dz_stretch_level_end(number_stretch_level_start) )
[3066]	321
[3065]	322	!
[4386]	323	!-- Define the vertical grid levels. Start with atmosphere branch
[3294]	324	IF ( .NOT. ocean_mode ) THEN
[4648]	325
[94]	326	!
[4648]	327	!-- The stretching region has to be large enough to allow for a smooth transition between two
	328	!-- different grid spacings. The number 4 is an empirical value.
[3065]	329	DO n = 1, number_stretch_level_start
[4648]	330	min_dz_stretch_level_end(n) = dz_stretch_level_start(n) + 4 * MAX( dz(n),dz(n+1) )
[3065]	331	ENDDO
	332
[4648]	333	IF ( ANY( min_dz_stretch_level_end(1:number_stretch_level_start) > &
	334	dz_stretch_level_end(1:number_stretch_level_start) ) ) THEN
	335	message_string= 'Each dz_stretch_level_end has to be larger ' // &
	336	'than its corresponding value for &' // &
	337	'dz_stretch_level_start + 4*MAX(dz(n),dz(n+1)) '// &
[4601]	338	'to allow for smooth grid stretching'
	339	CALL message( 'init_grid', 'PA0224', 1, 2, 0, 6, 0 )
[3065]	340	ENDIF
[4648]	341
[3065]	342	!
[4648]	343	!-- Stretching must not be applied within the surface layer (first two grid points). For the
	344	!-- default case dz_stretch_level_start is negative. Therefore the absolut value is checked here.
[4386]	345	IF ( ANY( ABS( dz_stretch_level_start ) <= dz(1) * 1.5_wp ) ) THEN
[4648]	346	WRITE( message_string, * ) 'Each dz_stretch_level_start has to be ', &
	347	'larger than ', dz(1) * 1.5
[4601]	348	CALL message( 'init_grid', 'PA0226', 1, 2, 0, 6, 0 )
[3065]	349	ENDIF
	350
	351	!
[4648]	352	!-- The stretching has to start and end on a grid level. Therefore user-specified values are
	353	!-- mapped to the next lowest level. The calculation of the first level is realized differently
	354	!-- just because of historical reasons (the advanced/new stretching mechanism was realized in a
	355	!-- way that results don't change if the old parameters dz_stretch_level, dz_stretch_factor and
	356	!-- dz_max are used).
	357	IF ( number_stretch_level_start /= 0 ) THEN
	358	dz_stretch_level_start(1) = INT( (dz_stretch_level_start(1) - dz(1)/2.0) / dz(1) ) &
[3065]	359	* dz(1) + dz(1)/2.0
	360	ENDIF
[4648]	361
[3065]	362	IF ( number_stretch_level_start > 1 ) THEN
	363	DO n = 2, number_stretch_level_start
[4648]	364	dz_stretch_level_start(n) = INT( dz_stretch_level_start(n) / dz(n) ) * dz(n)
[3065]	365	ENDDO
	366	ENDIF
[4648]	367
[3065]	368	IF ( number_stretch_level_end /= 0 ) THEN
	369	DO n = 1, number_stretch_level_end
[4648]	370	dz_stretch_level_end(n) = INT( dz_stretch_level_end(n) / dz(n+1) ) * dz(n+1)
[3065]	371	ENDDO
	372	ENDIF
[4386]	373
[3065]	374	!
	375	!-- Determine stretching factor if necessary
[4648]	376	IF ( number_stretch_level_end >= 1 ) THEN
[3065]	377	CALL calculate_stretching_factor( number_stretch_level_end )
	378	ENDIF
	379
	380	!
[94]	381	!-- Grid for atmosphere with surface at z=0 (k=0, w-grid).
[4648]	382	!-- First compute the u- and v-levels. In case of dirichlet bc for u and v the first u/v- and
	383	!-- w-level (k=0) are defined at same height (z=0).
	384	!-- The second u-level (k=1) corresponds to the top of the surface layer. In case of symmetric
	385	!-- boundaries (closed channel flow), the first grid point is always at z=0.
	386	IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2 .OR. topography == 'closed_channel' ) THEN
[1353]	387	zu(0) = 0.0_wp
[667]	388	ELSE
[3065]	389	zu(0) = - dz(1) * 0.5_wp
[667]	390	ENDIF
[4648]	391
[3065]	392	zu(1) = dz(1) * 0.5_wp
[4648]	393
[3065]	394	!
[4648]	395	!-- Determine u and v height levels considering the possibility of grid stretching in several
	396	!-- heights.
[3065]	397	n = 1
	398	dz_stretch_level_start_index = nzt+1
	399	dz_stretch_level_end_index = nzt+1
	400	dz_stretched = dz(1)
[1]	401
[4648]	402	!-- The default value of dz_stretch_level_start is negative, thus the first condition is true
	403	!-- even if no stretching shall be applied. Hence, the second condition is also necessary.
[4340]	404	DO k = 2, nzt+1-symmetry_flag
[4648]	405	IF ( dz_stretch_level_start(n) <= zu(k-1) .AND. &
	406	dz_stretch_level_start(n) /= -9999999.9_wp ) THEN
[3065]	407	dz_stretched = dz_stretched * dz_stretch_factor_array(n)
[4648]	408
	409	IF ( dz(n) > dz(n+1) ) THEN
[3065]	410	dz_stretched = MAX( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (higher) dz
	411	ELSE
	412	dz_stretched = MIN( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (lower) dz
	413	ENDIF
[4648]	414
	415	IF ( dz_stretch_level_start_index(n) == nzt+1 ) dz_stretch_level_start_index(n) = k-1
	416
[94]	417	ENDIF
[4648]	418
[94]	419	zu(k) = zu(k-1) + dz_stretched
[4648]	420
[3065]	421	!
[4648]	422	!-- Make sure that the stretching ends exactly at dz_stretch_level_end
	423	dz_level_end = ABS( zu(k) - dz_stretch_level_end(n) )
	424
	425	IF ( dz_level_end < dz(n+1)/3.0 ) THEN
[3065]	426	zu(k) = dz_stretch_level_end(n)
	427	dz_stretched = dz(n+1)
	428	dz_stretch_level_end_index(n) = k
[4648]	429	n = n + 1
[3065]	430	ENDIF
[94]	431	ENDDO
[4648]	432
[4340]	433	!
[4648]	434	!-- If a closed channel flow is simulated, make sure that grid structure is the same for both
	435	!-- bottom and top boundary. (Hint: Using a different dz at the bottom and at the top makes no
	436	!-- sense due to symmetric boundaries where dz should be equal. Therefore, different dz at the
	437	!-- bottom and top causes an abort (see check_parameters).)
	438	IF ( topography == 'closed_channel' ) THEN
[4340]	439	zu(nzt+1) = zu(nzt) + dz(1) * 0.5_wp
	440	ENDIF
[1]	441
	442	!
[4648]	443	!-- Compute the w-levels. They are always staggered half-way between the corresponding u-levels.
	444	!-- In case of dirichlet bc for u and v at the ground the first u- and w-level (k=0) are defined
	445	!-- at same height (z=0).
	446	!-- Per default, the top w-level is extrapolated linearly. In case of a closed channel flow,
	447	!-- zu(nzt+1) and zw(nzt) must be set explicitely.
	448	!-- (Hint: Using a different dz at the bottom and at the top makes no sense due to symmetric
	449	!-- boundaries where dz should be equal. Therefore, different dz at the bottom and top causes an
	450	!-- abort (see check_parameters).)
[1353]	451	zw(0) = 0.0_wp
[4340]	452	DO k = 1, nzt-symmetry_flag
[1353]	453	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
[94]	454	ENDDO
[4648]	455	IF ( topography == 'closed_channel' ) THEN
[4340]	456	zw(nzt) = zw(nzt-1) + dz(1)
	457	zw(nzt+1) = zw(nzt) + dz(1)
	458	ELSE
	459	zw(nzt+1) = zw(nzt) + 2.0_wp * ( zu(nzt+1) - zw(nzt) )
	460	ENDIF
[1]	461
[4386]	462	ELSE !ocean branch
[3065]	463
[1]	464	!
[4648]	465	!-- The stretching region has to be large enough to allow for a smooth transition between two
	466	!-- different grid spacings. The number 4 is an empirical value
[3065]	467	DO n = 1, number_stretch_level_start
[4648]	468	min_dz_stretch_level_end(n) = dz_stretch_level_start(n) - 4 * MAX( dz(n),dz(n+1) )
[3065]	469	ENDDO
[4648]	470
	471	IF ( ANY( min_dz_stretch_level_end (1:number_stretch_level_start) < &
	472	dz_stretch_level_end(1:number_stretch_level_start) ) ) THEN
	473	message_string= 'Each dz_stretch_level_end has to be less ' // &
	474	'than its corresponding value for &' // &
	475	'dz_stretch_level_start - 4*MAX(dz(n),dz(n+1)) '// &
[3065]	476	'to allow for smooth grid stretching'
	477	CALL message( 'init_grid', 'PA0224', 1, 2, 0, 6, 0 )
	478	ENDIF
[4648]	479
[3065]	480	!
[4648]	481	!-- Stretching must not be applied close to the surface (last two grid points). For the default
	482	!-- case dz_stretch_level_start is negative.
	483	IF ( ANY( dz_stretch_level_start >= - dz(1) * 1.5_wp ) ) THEN
	484	WRITE( message_string, * ) 'Each dz_stretch_level_start has to be ', &
	485	'less than ', -dz(1) * 1.5
[3065]	486	CALL message( 'init_grid', 'PA0226', 1, 2, 0, 6, 0 )
	487	ENDIF
	488
	489	!
[4648]	490	!-- The stretching has to start and end on a grid level. Therefore user-specified values are
	491	!-- mapped to the next highest level. The calculation of the first level is realized differently
	492	!-- just because of historical reasons (the advanced/new stretching mechanism was realized in a
	493	!-- way that results don't change if the old parameters dz_stretch_level, dz_stretch_factor and
	494	!-- dz_max are used)
	495	IF ( number_stretch_level_start /= 0 ) THEN
	496	dz_stretch_level_start(1) = INT( (dz_stretch_level_start(1) + dz(1)/2.0) / dz(1) ) &
[3065]	497	* dz(1) - dz(1)/2.0
	498	ENDIF
[4648]	499
	500	IF ( number_stretch_level_start > 1 ) THEN
[3065]	501	DO n = 2, number_stretch_level_start
[4648]	502	dz_stretch_level_start(n) = INT( dz_stretch_level_start(n) / dz(n) ) * dz(n)
[3065]	503	ENDDO
	504	ENDIF
[4648]	505
	506	IF ( number_stretch_level_end /= 0 ) THEN
[3065]	507	DO n = 1, number_stretch_level_end
[4648]	508	dz_stretch_level_end(n) = INT( dz_stretch_level_end(n) / dz(n+1) ) * dz(n+1)
[3065]	509	ENDDO
	510	ENDIF
[4648]	511
[3065]	512	!
	513	!-- Determine stretching factor if necessary
[4648]	514	IF ( number_stretch_level_end >= 1 ) THEN
[3065]	515	CALL calculate_stretching_factor( number_stretch_level_end )
	516	ENDIF
	517
	518	!
[843]	519	!-- Grid for ocean with free water surface is at k=nzt (w-grid).
[4648]	520	!-- In case of neumann bc at the ground the first first u-level (k=0) lies below the first
	521	!-- w-level (k=0). In case of dirichlet bc the first u- and w-level are defined at same height,
	522	!-- but staggered from the second level.
[4386]	523	!-- The second u-level (k=1) corresponds to the top of the surface layer.
[3065]	524	!-- z values are negative starting from z=0 (surface)
	525	zu(nzt+1) = dz(1) * 0.5_wp
	526	zu(nzt) = - dz(1) * 0.5_wp
[94]	527
[3065]	528	!
[4648]	529	!-- Determine u and v height levels considering the possibility of grid stretching in several
	530	!-- heights.
[3065]	531	n = 1
	532	dz_stretch_level_start_index = 0
	533	dz_stretch_level_end_index = 0
	534	dz_stretched = dz(1)
	535
[94]	536	DO k = nzt-1, 0, -1
[4648]	537
	538	IF ( dz_stretch_level_start(n) >= zu(k+1) ) THEN
[3065]	539	dz_stretched = dz_stretched * dz_stretch_factor_array(n)
	540
[4648]	541	IF ( dz(n) > dz(n+1) ) THEN
[3065]	542	dz_stretched = MAX( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (higher) dz
	543	ELSE
	544	dz_stretched = MIN( dz_stretched, dz(n+1) ) !Restrict dz_stretched to the user-specified (lower) dz
	545	ENDIF
[4648]	546
	547	IF ( dz_stretch_level_start_index(n) == 0 ) dz_stretch_level_start_index(n) = k+1
	548
[3065]	549	ENDIF
[4648]	550
[3065]	551	zu(k) = zu(k+1) - dz_stretched
[4648]	552
[1418]	553	!
[4648]	554	!-- Make sure that the stretching ends exactly at dz_stretch_level_end
	555	dz_level_end = ABS( zu(k) - dz_stretch_level_end(n) )
	556
	557	IF ( dz_level_end < dz(n+1)/3.0 ) THEN
[3065]	558	zu(k) = dz_stretch_level_end(n)
	559	dz_stretched = dz(n+1)
	560	dz_stretch_level_end_index(n) = k
[4648]	561	n = n + 1
[94]	562	ENDIF
	563	ENDDO
[4648]	564
[94]	565	!
[4648]	566	!-- Compute the w-levels. They are always staggered half-way between the corresponding u-levels,
	567	!-- except in case of dirichlet bc for u and v at the ground. In this case the first u- and
	568	!-- w-level are defined at same height. The top w-level (nzt+1) is not used but set for
[843]	569	!-- consistency, since w and all scalar variables are defined up tp nzt+1.
[3065]	570	zw(nzt+1) = dz(1)
[1353]	571	zw(nzt) = 0.0_wp
[94]	572	DO k = 0, nzt
[1353]	573	zw(k) = ( zu(k) + zu(k+1) ) * 0.5_wp
[94]	574	ENDDO
	575
[843]	576	!
[4648]	577	!-- In case of dirichlet bc for u and v the first u- and w-level are defined at same height.
[843]	578	IF ( ibc_uv_b == 0 ) THEN
	579	zu(0) = zw(0)
	580	ENDIF
	581
[4386]	582	ENDIF !End of defining the vertical grid levels
[94]	583
	584	!
[1]	585	!-- Compute grid lengths.
	586	DO k = 1, nzt+1
	587	dzu(k) = zu(k) - zu(k-1)
[1353]	588	ddzu(k) = 1.0_wp / dzu(k)
[1]	589	dzw(k) = zw(k) - zw(k-1)
[1353]	590	ddzw(k) = 1.0_wp / dzw(k)
[1]	591	ENDDO
	592
	593	DO k = 1, nzt
[1353]	594	dd2zu(k) = 1.0_wp / ( dzu(k) + dzu(k+1) )
[1]	595	ENDDO
[4648]	596
	597	!
	598	!-- The FFT- SOR-pressure solvers assume grid spacings of a staggered grid everywhere. For the
	599	!-- actual grid, the grid spacing at the lowest level is only dz/2, but should be dz. Therefore, an
	600	!-- additional array containing with appropriate grid information is created for these solvers.
[1575]	601	IF ( psolver(1:9) /= 'multigrid' ) THEN
[667]	602	ALLOCATE( ddzu_pres(1:nzt+1) )
	603	ddzu_pres = ddzu
[864]	604	ddzu_pres(1) = ddzu_pres(2) ! change for lowest level
[1]	605	ENDIF
	606
	607	!
	608	!-- Compute the reciprocal values of the horizontal grid lengths.
[1353]	609	ddx = 1.0_wp / dx
	610	ddy = 1.0_wp / dy
[1]	611	dx2 = dx * dx
	612	dy2 = dy * dy
[1353]	613	ddx2 = 1.0_wp / dx2
	614	ddy2 = 1.0_wp / dy2
[1]	615
	616	!
[2696]	617	!-- Allocate 3D array to set topography
	618	ALLOCATE( topo(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	619	topo = 0
	620	!
[4648]	621	!-- Initialize topography by generic topography or read topography from file.
[2696]	622	CALL init_topo( topo )
	623	!
[4648]	624	!-- Set flags to mask topography on the grid.
[4414]	625	CALL set_topo_flags( topo )
[2696]	626
	627	!
[4648]	628	!-- Determine the maximum level of topography. It is used for steering the degradation of order of
	629	!-- the applied advection scheme, as well in the lpm.
[2696]	630	k_top = 0
	631	DO i = nxl, nxr
	632	DO j = nys, nyn
	633	DO k = nzb, nzt + 1
[4109]	634	k_top = MAX( k_top, MERGE( k, 0, .NOT. BTEST( topo(k,j,i), 0 ) ) )
[2696]	635	ENDDO
	636	ENDDO
[1]	637	ENDDO
[2696]	638	#if defined( __parallel )
[4648]	639	CALL MPI_ALLREDUCE( k_top, nzb_max, 1, MPI_INTEGER, MPI_MAX, comm2d, ierr )
[2696]	640	#else
[4328]	641	nzb_max = k_top
[2696]	642	#endif
[1]	643	!
[4328]	644	!-- Increment nzb_max by 1 in order to allow for proper diverengence correction.
	645	!-- Further, in case topography extents up to the model top, limit to nzt.
[4648]	646	nzb_max = MIN( nzb_max+1, nzt )
[4328]	647	!
[4648]	648	!-- Determine minimum index of topography. Usually, this will be nzb. In case there is elevated
	649	!-- topography, however, the lowest topography will be higher.
	650	!-- This index is e.g. used to calculate mean first-grid point atmosphere temperature, surface
	651	!-- pressure and density, etc. .
[2968]	652	topo_min_level = 0
	653	#if defined( __parallel )
[4648]	654	CALL MPI_ALLREDUCE( MINVAL( topo_top_ind(nys:nyn,nxl:nxr,0) ), topo_min_level, 1, MPI_INTEGER, &
	655	MPI_MIN, comm2d, ierr )
[2968]	656	#else
[4168]	657	topo_min_level = MINVAL( topo_top_ind(nys:nyn,nxl:nxr,0) )
[2968]	658	#endif
[3182]	659
[2696]	660	!
[4648]	661	!-- Check topography for consistency with model domain. Therefore, use maximum and minium
	662	!-- topography-top indices. Note, minimum topography top index is already calculated.
[2696]	663	IF ( TRIM( topography ) /= 'flat' ) THEN
	664	#if defined( __parallel )
[4648]	665	CALL MPI_ALLREDUCE( MAXVAL( topo_top_ind(nys:nyn,nxl:nxr,0) ), nzb_local_max, 1, &
	666	MPI_INTEGER, MPI_MAX, comm2d, ierr )
[2696]	667	#else
[4168]	668	nzb_local_max = MAXVAL( topo_top_ind(nys:nyn,nxl:nxr,0) )
[2696]	669	#endif
[2968]	670	nzb_local_min = topo_min_level
[2696]	671	!
	672	!-- Consistency checks
	673	IF ( nzb_local_min < 0 .OR. nzb_local_max > nz + 1 ) THEN
[4648]	674	WRITE( message_string, * ) 'nzb_local values are outside the model domain', &
	675	'&MINVAL( nzb_local ) = ', nzb_local_min, &
	676	'&MAXVAL( nzb_local ) = ', nzb_local_max
[2696]	677	CALL message( 'init_grid', 'PA0210', 1, 2, 0, 6, 0 )
	678	ENDIF
	679	ENDIF
[1]	680	!
[4648]	681	!-- Define vertical gridpoint from (or to) which on the usual finite difference form (which does not
	682	!-- use surface fluxes) is applied.
[1691]	683	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[1]	684	nzb_diff = nzb + 2
	685	ELSE
	686	nzb_diff = nzb + 1
	687	ENDIF
	688
[4414]	689	IF ( TRIM( topography ) /= 'flat' ) THEN
[2696]	690	!
[4648]	691	!-- Allocate and set the arrays containing the topography height (for output reasons only).
[4414]	692	IF ( nxr == nx .AND. nyn /= ny ) THEN
[4648]	693	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn), zw_w_inner(nxl:nxr+1,nys:nyn) )
[4414]	694	ELSEIF ( nxr /= nx .AND. nyn == ny ) THEN
[4648]	695	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn+1), zw_w_inner(nxl:nxr,nys:nyn+1) )
[4414]	696	ELSEIF ( nxr == nx .AND. nyn == ny ) THEN
[4648]	697	ALLOCATE( zu_s_inner(nxl:nxr+1,nys:nyn+1), zw_w_inner(nxl:nxr+1,nys:nyn+1) )
[4414]	698	ELSE
[4648]	699	ALLOCATE( zu_s_inner(nxl:nxr,nys:nyn), zw_w_inner(nxl:nxr,nys:nyn) )
[2696]	700	ENDIF
[1]	701
[4414]	702	zu_s_inner = 0.0_wp
	703	zw_w_inner = 0.0_wp
[1]	704	!
[4648]	705	!-- Determine local topography height on scalar and w-grid. Note, setting lateral boundary values
	706	!-- is not necessary, realized via wall_flags_static_0 array. Further, please note that loop
	707	!-- bounds are different from nxl to nxr and nys to nyn on south and right model boundary, hence,
[4414]	708	!-- use intrinsic lbound and ubound functions to infer array bounds.
	709	DO i = LBOUND(zu_s_inner, 1), UBOUND(zu_s_inner, 1)
	710	DO j = LBOUND(zu_s_inner, 2), UBOUND(zu_s_inner, 2)
[2696]	711	!
[4648]	712	!-- Topography height on scalar grid. Therefore, determine index of upward-facing surface
	713	!-- element on scalar grid.
[4414]	714	zu_s_inner(i,j) = zu(topo_top_ind(j,i,0))
[2696]	715	!
[4648]	716	!-- Topography height on w grid. Therefore, determine index of upward-facing surface
	717	!-- element on w grid.
[4414]	718	zw_w_inner(i,j) = zw(topo_top_ind(j,i,3))
	719	ENDDO
[2696]	720	ENDDO
	721	ENDIF
[4444]	722
[2696]	723	END SUBROUTINE init_grid
	724
[3065]	725
[2696]	726	! Description:
[4648]	727	! -------------------------------------------------------------------------------------------------!
	728	!> Calculation of the stretching factor through an iterative method. Ideas were taken from the paper
	729	!> "Regional stretched grid generation and its application to the NCAR RegCM (1999)". Normally, no
	730	!> analytic solution exists because the system of equations has two variables (r,l) but four
	731	!> requirements (l=integer, r=[0,88;1,2], Eq(6), Eq(5) starting from index j=1) which results into
	732	!> an overdetermined system.
	733	!--------------------------------------------------------------------------------------------------!
[3065]	734	SUBROUTINE calculate_stretching_factor( number_end )
[4648]	735
	736	USE control_parameters, &
	737	ONLY: dz, dz_stretch_factor_array, dz_stretch_level_end, dz_stretch_level_start, &
	738	message_string
	739
[3065]	740	USE kinds
[4648]	741
[3065]	742	IMPLICIT NONE
[4648]	743
	744	REAL(wp), PARAMETER :: stretch_factor_interval = 1.0E-06_wp !< interval for sampling possible stretching factors
	745	REAL(wp), PARAMETER :: stretch_factor_lower_limit = 0.88_wp !< lowest possible stretching factor
	746	REAL(wp), PARAMETER :: stretch_factor_upper_limit = 1.12_wp !< highest possible stretching factor
	747
	748	INTEGER(iwp) :: iterations !< number of iterations until stretch_factor_lower/upper_limit is reached
	749	INTEGER(iwp) :: l_rounded !< after l_rounded grid levels dz(n) is strechted to dz(n+1) with stretch_factor_2
[3065]	750	INTEGER(iwp) :: n !< loop variable for stretching
[4648]	751
[3065]	752	INTEGER(iwp), INTENT(IN) :: number_end !< number of user-specified end levels for stretching
[4648]	753
[3065]	754	REAL(wp) :: delta_l !< absolute difference between l and l_rounded
	755	REAL(wp) :: delta_stretch_factor !< absolute difference between stretch_factor_1 and stretch_factor_2
[4648]	756	REAL(wp) :: delta_total_new !< sum of delta_l and delta_stretch_factor for the next iteration (should be as small as
	757	!< possible)
	758	REAL(wp) :: delta_total_old !< sum of delta_l and delta_stretch_factor for the last iteration
[3065]	759	REAL(wp) :: distance !< distance between dz_stretch_level_start and dz_stretch_level_end (stretching region)
[4648]	760	REAL(wp) :: l !< value that fulfil Eq. (5) in the paper mentioned above together with stretch_factor_1
	761	!< exactly
[3065]	762	REAL(wp) :: numerator !< numerator of the quotient
	763	REAL(wp) :: stretch_factor_1 !< stretching factor that fulfil Eq. (5) togehter with l exactly
	764	REAL(wp) :: stretch_factor_2 !< stretching factor that fulfil Eq. (6) togehter with l_rounded exactly
[4648]	765
	766	REAL(wp) :: dz_stretch_factor_array_2(9) = 1.08_wp !< Array that contains all stretch_factor_2 that belongs to
	767	!< stretch_factor_1
	768
	769
[3068]	770	l = 0
	771	DO n = 1, number_end
[4648]	772
[3068]	773	iterations = 1
[4648]	774	stretch_factor_1 = 1.0_wp
[4386]	775	stretch_factor_2 = 1.0_wp
	776	delta_total_old = 1.0_wp
[4648]	777
[4386]	778	!
	779	!-- First branch for stretching from rough to fine
[4648]	780	IF ( dz(n) > dz(n+1) ) THEN
	781	DO WHILE ( stretch_factor_1 >= stretch_factor_lower_limit )
	782
[4386]	783	stretch_factor_1 = 1.0_wp - iterations * stretch_factor_interval
[4648]	784	distance = ABS( dz_stretch_level_end(n) - dz_stretch_level_start(n) )
	785	numerator = distance * stretch_factor_1 / dz(n) + stretch_factor_1 - distance / dz(n)
	786
	787	IF ( numerator > 0.0_wp ) THEN
[4386]	788	l = LOG( numerator ) / LOG( stretch_factor_1 ) - 1.0_wp
[3068]	789	l_rounded = NINT( l )
	790	delta_l = ABS( l_rounded - l ) / l
	791	ENDIF
[4648]	792
[3068]	793	stretch_factor_2 = EXP( LOG( dz(n+1)/dz(n) ) / (l_rounded) )
[4648]	794
	795	delta_stretch_factor = ABS( stretch_factor_1 - stretch_factor_2 ) / stretch_factor_2
	796
[3068]	797	delta_total_new = delta_l + delta_stretch_factor
[3065]	798
	799	!
[4648]	800	!-- stretch_factor_1 is taken to guarantee that the stretching procedure ends as close as
	801	!-- possible to dz_stretch_level_end.
	802	!-- stretch_factor_2 would guarantee that the stretched dz(n) is equal to dz(n+1) after
	803	!-- l_rounded grid levels.
	804	IF (delta_total_new < delta_total_old) THEN
[3068]	805	dz_stretch_factor_array(n) = stretch_factor_1
	806	dz_stretch_factor_array_2(n) = stretch_factor_2
	807	delta_total_old = delta_total_new
	808	ENDIF
[4648]	809
[3068]	810	iterations = iterations + 1
[4648]	811
[3068]	812	ENDDO
[4386]	813
	814	!
	815	!-- Second branch for stretching from fine to rough
[4648]	816	ELSEIF ( dz(n) < dz(n+1) ) THEN
[3068]	817	DO WHILE ( stretch_factor_1 <= stretch_factor_upper_limit )
[4648]	818
[4386]	819	stretch_factor_1 = 1.0_wp + iterations * stretch_factor_interval
[4648]	820	distance = ABS( dz_stretch_level_end(n) - dz_stretch_level_start(n) )
	821	numerator = distance * stretch_factor_1 / dz(n) + stretch_factor_1 - distance / dz(n)
	822
[4386]	823	l = LOG( numerator ) / LOG( stretch_factor_1 ) - 1.0_wp
[3068]	824	l_rounded = NINT( l )
	825	delta_l = ABS( l_rounded - l ) / l
[4648]	826
[3068]	827	stretch_factor_2 = EXP( LOG( dz(n+1)/dz(n) ) / (l_rounded) )
[3065]	828
[4648]	829	delta_stretch_factor = ABS( stretch_factor_1 - stretch_factor_2 ) / stretch_factor_2
	830
[3068]	831	delta_total_new = delta_l + delta_stretch_factor
[4648]	832
[3065]	833	!
[4648]	834	!-- stretch_factor_1 is taken to guarantee that the stretching procedure ends as close as
	835	!-- possible to dz_stretch_level_end.
	836	!-- stretch_factor_2 would guarantee that the stretched dz(n) is equal to dz(n+1) after
	837	!-- l_rounded grid levels.
	838	IF (delta_total_new < delta_total_old) THEN
[3068]	839	dz_stretch_factor_array(n) = stretch_factor_1
	840	dz_stretch_factor_array_2(n) = stretch_factor_2
	841	delta_total_old = delta_total_new
	842	ENDIF
[4648]	843
[3068]	844	iterations = iterations + 1
	845	ENDDO
[4648]	846
[3068]	847	ELSE
	848	message_string= 'Two adjacent values of dz must be different'
	849	CALL message( 'init_grid', 'PA0228', 1, 2, 0, 6, 0 )
[4648]	850
[3068]	851	ENDIF
	852
	853	!
[4648]	854	!-- Check if also the second stretching factor fits into the allowed interval. If not, print a
	855	!-- warning for the user.
	856	IF ( dz_stretch_factor_array_2(n) < stretch_factor_lower_limit .OR. &
	857	dz_stretch_factor_array_2(n) > stretch_factor_upper_limit ) THEN
	858	WRITE( message_string, * ) 'stretch_factor_2 = ', dz_stretch_factor_array_2(n), &
	859	' which is', ' responsible for exactly reaching& dz =', &
	860	dz(n+1), 'after a specific amount of', &
	861	' grid levels& exceeds the upper', &
	862	' limit =', stretch_factor_upper_limit, &
	863	' &or lower limit = ', stretch_factor_lower_limit
[3068]	864	CALL message( 'init_grid', 'PA0499', 0, 1, 0, 6, 0 )
[4648]	865
[3068]	866	ENDIF
	867	ENDDO
[4648]	868
[3065]	869	END SUBROUTINE calculate_stretching_factor
[4648]	870
	871
[3065]	872	! Description:
[4648]	873	! -------------------------------------------------------------------------------------------------!
	874	!> Set temporary topography flags and reference buildings on top of underlying orography.
	875	!--------------------------------------------------------------------------------------------------!
[2696]	876	SUBROUTINE process_topography( topo_3d )
	877
[4648]	878	USE arrays_3d, &
[2747]	879	ONLY: zu, zw
[2696]	880
[4648]	881	USE control_parameters, &
[4507]	882	ONLY: bc_lr_cyc, bc_ns_cyc, ocean_mode
[2696]	883
[4648]	884	USE exchange_horiz_mod, &
	885	ONLY: exchange_horiz_2d, exchange_horiz_int
[4457]	886
[4648]	887	USE indices, &
	888	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt
[2696]	889
[4648]	890	USE netcdf_data_input_mod, &
	891	ONLY: buildings_f, building_id_f, building_type_f, &
	892	init_model, &
	893	input_pids_static, &
[2696]	894	terrain_height_f
	895
	896	USE kinds
	897
	898	USE pegrid
	899
	900	IMPLICIT NONE
	901
[2867]	902	INTEGER(iwp) :: i !< running index along x-direction
	903	INTEGER(iwp) :: j !< running index along y-direction
	904	INTEGER(iwp) :: k !< running index along z-direction with respect to numeric grid
	905	INTEGER(iwp) :: k2 !< running index along z-direction with respect to netcdf grid
	906	INTEGER(iwp) :: nr !< index variable indication maximum terrain height for respective building ID
	907	INTEGER(iwp) :: num_build !< counter for number of buildings
	908	INTEGER(iwp) :: topo_top_index !< orography top index, used to map 3D buildings onto terrain
[2696]	909
[4444]	910	#if defined( __parallel )
[2696]	911	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
[4444]	912	#endif
[2696]	913	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
[4648]	914	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain, multiple occurences are
	915	!< sorted out
[2696]	916	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	917	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	918	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	919
	920	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	921	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
	922
[4648]	923	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< input array for 3D topography and dummy array for setting
	924	!< "outer"-flags
[2696]	925
[4648]	926	REAL(wp) :: ocean_offset !< offset to consider inverse vertical coordinate at topography
	927	!< definition
	928	REAL(wp) :: oro_min = 0.0_wp !< minimum terrain height in entire model domain, used to reference
	929	!< terrain to zero
[2696]	930	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max !< maximum terrain height occupied by an building with certain id
[4648]	931	REAL(wp), DIMENSION(:), ALLOCATABLE :: oro_max_l !< maximum terrain height occupied by an building with certain id,
	932	!< on local subdomain
[2696]	933
	934	!
[4648]	935	!-- Reference lowest terrain height to zero. This ensures that first, non-required gird levels
	936	!-- (those which lie entirely below the minimum orography) are avoided, and second, that also
	937	!-- negative orography can be used within the input file.
	938	!-- Please note, in case of a nested run, the global minimum from all parent and childs needs to be
	939	!-- removed to avoid steep edges at the child-domain boundaries.
[3103]	940	IF ( input_pids_static ) THEN
[4648]	941
	942	#if defined( __parallel )
	943	CALL MPI_ALLREDUCE( MINVAL( terrain_height_f%var ), oro_min, 1, MPI_REAL, MPI_MIN, &
	944	MPI_COMM_WORLD, ierr )
[3200]	945	#else
	946	oro_min = MINVAL( terrain_height_f%var )
	947	#endif
[3103]	948	terrain_height_f%var = terrain_height_f%var - oro_min
[4507]	949	!
	950	!-- Update reference height used within output files
	951	init_model%origin_z = init_model%origin_z + oro_min
	952
[4648]	953	ENDIF
	954
[3103]	955	!
[4648]	956	!-- In the following, buildings and orography are further preprocessed before they are mapped on the
	957	!-- LES grid.
	958	!-- Buildings are mapped on top of the orography by maintaining the roof shape of the building. This
	959	!-- can be achieved by referencing building on top of the maximum terrain height within the area
	960	!-- occupied by the respective building. As buildings and terrain height are defined PE-wise,
	961	!-- parallelization of this referencing is required (a building can be distributed between different
	962	!-- PEs).
	963	!-- In a first step, determine the number of buildings with different building id on each PE. In a
	964	!-- next step, all building ids are gathered into one array which is present to all PEs. For each
	965	!-- building ID, the maximum terrain height occupied by the respective building is computed and
	966	!-- distributed to each PE.
	967	!-- Finally, for each building id and its respective reference orography, builidings are mapped on
	968	!-- top.
	969	!--
	970	!-- First, pre-set topography flags, bit 1 indicates orography, bit 2 buildings classify the
	971	!-- respective surfaces.
[2696]	972	topo_3d = IBSET( topo_3d, 0 )
	973	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
	974	!
[4648]	975	!-- In order to map topography on PALM grid also in case of ocean simulations, pre-calculate an
	976	!-- offset value.
[3294]	977	ocean_offset = MERGE( zw(0), 0.0_wp, ocean_mode )
[3051]	978	!
[4648]	979	!-- Reference buildings on top of orography. This is not necessary if topography is read from ASCII
	980	!-- file as no distinction between buildings and terrain height can be made. Moreover, this is also
	981	!-- not necessary if urban-surface and land-surface model are used at the same time.
[2897]	982	IF ( input_pids_static ) THEN
	983
[4648]	984	IF ( buildings_f%from_file ) THEN
[2897]	985	num_buildings_l = 0
	986	num_buildings = 0
[2696]	987	!
[4648]	988	!-- Allocate at least one element for building ids and give it an inital negative value that
	989	!-- will be overwritten later. This, however, is necessary in case there all IDs in the model
	990	!-- domain are fill values.
[2897]	991	ALLOCATE( build_ids_l(1) )
[4648]	992	build_ids_l = -1
[2897]	993	DO i = nxl, nxr
	994	DO j = nys, nyn
	995	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	996	IF ( num_buildings_l(myid) > 0 ) THEN
[4648]	997	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
[2897]	998	CYCLE
	999	ELSE
	1000	num_buildings_l(myid) = num_buildings_l(myid) + 1
[2696]	1001	!
	1002	!-- Resize array with different local building ids
	1003	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	1004	build_ids_l_tmp = build_ids_l
	1005	DEALLOCATE( build_ids_l )
	1006	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
[4648]	1007	build_ids_l(1:num_buildings_l(myid)-1) = &
	1008	build_ids_l_tmp(1:num_buildings_l(myid)-1)
[2696]	1009	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	1010	DEALLOCATE( build_ids_l_tmp )
	1011	ENDIF
	1012	!
[4648]	1013	!-- First occuring building id on PE
	1014	ELSE
[2897]	1015	num_buildings_l(myid) = num_buildings_l(myid) + 1
	1016	build_ids_l(1) = building_id_f%var(j,i)
	1017	ENDIF
[2696]	1018	ENDIF
[2897]	1019	ENDDO
[2696]	1020	ENDDO
	1021	!
[4648]	1022	!-- Determine number of different building ids for the entire domain
	1023	#if defined( __parallel )
	1024	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, &
	1025	comm2d, ierr )
[2696]	1026	#else
[2897]	1027	num_buildings = num_buildings_l
[2696]	1028	#endif
	1029	!
[4648]	1030	!-- Gather all buildings ids on each PEs.
	1031	!-- First, allocate array encompassing all building ids in model domain.
[2897]	1032	ALLOCATE( build_ids(1:SUM(num_buildings)) )
[4648]	1033	#if defined( __parallel )
[2696]	1034	!
[4648]	1035	!-- Allocate array for displacements.
	1036	!-- As each PE may has a different number of buildings, so that the block sizes send by each
	1037	!-- PE may not be equal. Hence, information about the respective displacement is required,
	1038	!-- indicating the respective adress where each MPI-task writes into the receive buffer array.
[2897]	1039	ALLOCATE( displace_dum(0:numprocs-1) )
	1040	displace_dum(0) = 0
	1041	DO i = 1, numprocs-1
	1042	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	1043	ENDDO
[2696]	1044
[4648]	1045	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), num_buildings(myid), &
	1046	MPI_INTEGER, build_ids, num_buildings, displace_dum, MPI_INTEGER, &
	1047	comm2d, ierr )
[2696]	1048
[2897]	1049	DEALLOCATE( displace_dum )
[2696]	1050
	1051	#else
[2897]	1052	build_ids = build_ids_l
[2696]	1053	#endif
	1054
	1055	!
[4648]	1056	!-- Note, in parallel mode building ids can occure mutliple times, as each PE has send its own
	1057	!-- ids. Therefore, sort out building ids which appear more than one time.
[2897]	1058	num_build = 0
	1059	DO nr = 1, SIZE(build_ids)
[2696]	1060
[2897]	1061	IF ( ALLOCATED(build_ids_final) ) THEN
[4144]	1062	IF ( ANY( build_ids(nr) == build_ids_final ) ) THEN
[2897]	1063	CYCLE
	1064	ELSE
	1065	num_build = num_build + 1
	1066	!
	1067	!-- Resize
	1068	ALLOCATE( build_ids_final_tmp(1:num_build) )
	1069	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	1070	DEALLOCATE( build_ids_final )
	1071	ALLOCATE( build_ids_final(1:num_build) )
	1072	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	1073	build_ids_final(num_build) = build_ids(nr)
	1074	DEALLOCATE( build_ids_final_tmp )
[4648]	1075	ENDIF
[2696]	1076	ELSE
	1077	num_build = num_build + 1
	1078	ALLOCATE( build_ids_final(1:num_build) )
	1079	build_ids_final(num_build) = build_ids(nr)
[2897]	1080	ENDIF
	1081	ENDDO
[2696]	1082
	1083	!
[4648]	1084	!-- Determine maximumum terrain height occupied by the respective building and temporalily
	1085	!-- store on oro_max.
[2897]	1086	ALLOCATE( oro_max_l(1:SIZE(build_ids_final)) )
	1087	ALLOCATE( oro_max(1:SIZE(build_ids_final)) )
	1088	oro_max_l = 0.0_wp
[2696]	1089
[2897]	1090	DO nr = 1, SIZE(build_ids_final)
[4648]	1091	oro_max_l(nr) = MAXVAL( MERGE( terrain_height_f%var(nys:nyn,nxl:nxr), &
	1092	0.0_wp, &
	1093	building_id_f%var(nys:nyn,nxl:nxr) == &
	1094	build_ids_final(nr) ) )
[2897]	1095	ENDDO
[4648]	1096
	1097	#if defined( __parallel )
	1098	IF ( SIZE(build_ids_final) >= 1 ) THEN
	1099	CALL MPI_ALLREDUCE( oro_max_l, oro_max, SIZE( oro_max ), MPI_REAL, MPI_MAX, comm2d, &
	1100	ierr )
[2897]	1101	ENDIF
[2696]	1102	#else
[2897]	1103	oro_max = oro_max_l
[2696]	1104	#endif
[3051]	1105	!
[4648]	1106	!-- Finally, determine discrete grid height of maximum orography occupied by a building. Use
	1107	!-- all-or-nothing approach, i.e. if terrain exceeds the scalar level the grid box is fully
	1108	!-- terrain and the maximum terrain is set to the zw level.
	1109	!-- terrain or
[3051]	1110	oro_max_l = 0.0
	1111	DO nr = 1, SIZE(build_ids_final)
	1112	DO k = nzb, nzt
[4648]	1113	IF ( zu(k) - ocean_offset <= oro_max(nr) ) oro_max_l(nr) = zw(k) - ocean_offset
[3051]	1114	ENDDO
[3142]	1115	oro_max(nr) = oro_max_l(nr)
[3051]	1116	ENDDO
[2897]	1117	ENDIF
[2696]	1118	!
[4245]	1119	!-- Allocate array for storing terrain height under buildings
	1120	IF ( buildings_f%from_file ) THEN
	1121	ALLOCATE( buildings_f%oro_max(nysg:nyng,nxlg:nxrg) )
	1122	buildings_f%oro_max = buildings_f%fill1
	1123	END IF
	1124	!
[4648]	1125	!-- Map orography as well as buildings onto grid.
[2696]	1126	DO i = nxl, nxr
	1127	DO j = nys, nyn
[2867]	1128	topo_top_index = 0
[3142]	1129	!
	1130	!-- Obtain index in global building_id array
	1131	IF ( buildings_f%from_file ) THEN
	1132	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1133	!
[4648]	1134	!-- Determine index where maximum terrain height occupied by the respective building
	1135	!-- height is stored.
	1136	nr = MINLOC( ABS( build_ids_final - building_id_f%var(j,i) ), DIM=1 )
[4245]	1137	!
	1138	!-- Save grid-indexed oro_max
	1139	buildings_f%oro_max(j,i) = oro_max(nr)
[3142]	1140	ENDIF
	1141	ENDIF
[2696]	1142	DO k = nzb, nzt
	1143	!
[4648]	1144	!-- In a first step, if grid point is below or equal the given terrain height, grid
	1145	!-- point is flagged to be of type natural.
	1146	!-- Please note, in case there is also a building which is lower than the vertical grid
	1147	!-- spacing, initialization of surface attributes will not be correct as given surface
	1148	!-- information will not be in accordance to the classified grid points.
[4159]	1149	!-- Hence, in this case, also a building flag.
[2747]	1150	IF ( zu(k) - ocean_offset <= terrain_height_f%var(j,i) ) THEN
[4189]	1151	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
	1152	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
	1153	topo_top_index = k ! topo_top_index + 1
[2696]	1154	ENDIF
	1155	!
[4648]	1156	!-- Set building grid points. Here, only consider 2D buildings.
	1157	!-- 3D buildings require separate treatment.
[2897]	1158	IF ( buildings_f%from_file .AND. buildings_f%lod == 1 ) THEN
[4159]	1159	!
[4648]	1160	!-- Fill-up the terrain to the level of maximum orography within the building-covered
	1161	!-- area.
[4159]	1162	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1163	!
[4648]	1164	!-- Note, oro_max is always on zw level
[4159]	1165	IF ( zu(k) - ocean_offset < oro_max(nr) ) THEN
[2696]	1166	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4159]	1167	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
[4648]	1168	ELSEIF ( zu(k) - ocean_offset <= oro_max(nr) + buildings_f%var_2d(j,i) ) THEN
[4159]	1169	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[2696]	1170	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1171	ENDIF
	1172	ENDIF
	1173	ENDIF
	1174	ENDDO
	1175	!
[4648]	1176	!-- Special treatment for non grid-resolved buildings. This case, the uppermost terrain
	1177	!-- grid point is flagged as building as well, even though no building exists at all.
	1178	!-- However, the surface element will be identified as urban-surface and the input data
	1179	!-- provided by the drivers is consistent to the surface classification. Else, all non
	1180	!-- grid-resolved buildings would vanish and identified as terrain grid points, which,
	1181	!-- however, won't be consistent with the input data.
[4159]	1182	IF ( buildings_f%from_file .AND. buildings_f%lod == 1 ) THEN
	1183	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1184	DO k = nzb, nzt
	1185	IF( zw(k) - ocean_offset == oro_max(nr) ) THEN
	1186	IF ( buildings_f%var_2d(j,i) <= zu(k+1) - zw(k) ) THEN
	1187	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1188	ENDIF
	1189	ENDIF
	1190	ENDDO
	1191	ENDIF
	1192	ENDIF
	1193	!
[4648]	1194	!-- Map 3D buildings onto terrain height.
	1195	!-- In case of any slopes, map building on top of maximum terrain height covered by the
	1196	!-- building. In other words, extend building down to the respective local terrain-surface
	1197	!-- height.
[2897]	1198	IF ( buildings_f%from_file .AND. buildings_f%lod == 2 ) THEN
[2696]	1199	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1200	!
[4648]	1201	!-- Extend building down to the terrain surface, i.e. fill-up surface irregularities
	1202	!-- below a building. Note, oro_max is already a discrete height according to the
	1203	!-- all-or-nothing approach, i.e. grid box is either topography or atmosphere,
[3051]	1204	!-- terrain top is defined at upper bound of the grid box.
[4648]	1205	!-- Hence, check for zw in this case.
	1206	!-- Note, do this only for buildings which are surface mounted, i.e. building types
	1207	!-- 1-6. Below bridges, which are represented exclusively by building type 7, terrain
	1208	!-- shape should be maintained.
[3855]	1209	IF ( building_type_f%from_file ) THEN
	1210	IF ( building_type_f%var(j,i) /= 7 ) THEN
[4648]	1211	DO k = topo_top_index + 1, nzt + 1
[4159]	1212	IF ( zu(k) - ocean_offset <= oro_max(nr) ) THEN
[3855]	1213	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4159]	1214	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
[3855]	1215	ENDIF
[4648]	1216	ENDDO
	1217	!
	1218	!-- After surface irregularities are smoothen, determine lower start index
	1219	!-- where building starts.
[3855]	1220	DO k = nzb, nzt
[4648]	1221	IF ( zu(k) - ocean_offset <= oro_max(nr) ) topo_top_index = k
[3855]	1222	ENDDO
	1223	ENDIF
[3115]	1224	ENDIF
[3051]	1225	!
	1226	!-- Finally, map building on top.
[2867]	1227	k2 = 0
	1228	DO k = topo_top_index, nzt + 1
[2796]	1229	IF ( k2 <= buildings_f%nz-1 ) THEN
[2696]	1230	IF ( buildings_f%var_3d(k2,j,i) == 1 ) THEN
	1231	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
	1232	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1233	ENDIF
	1234	ENDIF
	1235	k2 = k2 + 1
	1236	ENDDO
	1237	ENDIF
	1238	ENDIF
	1239	ENDDO
	1240	ENDDO
	1241	!
[4648]	1242	!-- Horizontal exchange the oro_max array, which is required to for initialization of
	1243	!-- building-surface properties.
[4265]	1244	IF ( ALLOCATED( buildings_f%oro_max ) ) THEN
[4457]	1245	CALL exchange_horiz_2d( buildings_f%oro_max(:,:) )
[4265]	1246	ENDIF
[4245]	1247	!
[2696]	1248	!-- Deallocate temporary arrays required for processing and reading data
	1249	IF ( ALLOCATED( oro_max ) ) DEALLOCATE( oro_max )
	1250	IF ( ALLOCATED( oro_max_l ) ) DEALLOCATE( oro_max_l )
	1251	IF ( ALLOCATED( build_ids_final ) ) DEALLOCATE( build_ids_final )
	1252	!
[4648]	1253	!-- Topography input via ASCII format.
[2696]	1254	ELSE
[3294]	1255	ocean_offset = MERGE( zw(0), 0.0_wp, ocean_mode )
[4159]	1256	!
[4648]	1257	!-- Initialize topography bit 0 (indicates obstacle) everywhere to zero and clear all grid points
	1258	!-- at nzb, where alway a surface is defined.
	1259	!-- Further, set also bit 1 (indicates terrain) at nzb, which is further used for masked data
	1260	!-- output and further processing. Note, in the ASCII case no distinction is made between
	1261	!-- buildings and terrain, so that setting of bit 1 and 2 at the same time has no effect.
[2696]	1262	topo_3d = IBSET( topo_3d, 0 )
	1263	topo_3d(nzb,:,:) = IBCLR( topo_3d(nzb,:,:), 0 )
[4159]	1264	topo_3d(nzb,:,:) = IBSET( topo_3d(nzb,:,:), 1 )
[2696]	1265	DO i = nxl, nxr
	1266	DO j = nys, nyn
	1267	DO k = nzb, nzt
[3538]	1268	!
[4648]	1269	!-- Flag topography for all grid points which are below the local topography height.
	1270	!-- Note, each topography is flagged as building (bit 2) as well as terrain (bit 1) in
	1271	!-- order to employ urban-surface as well as land-surface model.
[2747]	1272	IF ( zu(k) - ocean_offset <= buildings_f%var_2d(j,i) ) THEN
[4189]	1273	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4630]	1274	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 1 )
	1275	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
[2696]	1276	ENDIF
	1277	ENDDO
	1278	ENDDO
	1279	ENDDO
	1280	ENDIF
	1281
	1282	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
	1283
	1284	IF ( .NOT. bc_ns_cyc ) THEN
	1285	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
	1286	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
	1287	ENDIF
	1288
	1289	IF ( .NOT. bc_lr_cyc ) THEN
	1290	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
[4648]	1291	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
[2696]	1292	ENDIF
	1293
	1294	END SUBROUTINE process_topography
	1295
	1296
	1297	! Description:
[4648]	1298	! -------------------------------------------------------------------------------------------------!
	1299	!> Filter topography, i.e. fill holes resolved by only one grid point.
	1300	!> Such holes are suspected to lead to velocity blow-ups as continuity equation on discrete grid
	1301	!> cannot be fulfilled in such case.
	1302	!--------------------------------------------------------------------------------------------------!
[2696]	1303	SUBROUTINE filter_topography( topo_3d )
	1304
[4648]	1305	USE control_parameters, &
[2696]	1306	ONLY: bc_lr_cyc, bc_ns_cyc, message_string
	1307
[4648]	1308	USE exchange_horiz_mod, &
[4457]	1309	ONLY: exchange_horiz_int, exchange_horiz_2d_byte, exchange_horiz_2d_int
	1310
[4648]	1311	USE indices, &
[2696]	1312	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt
	1313
[4648]	1314	USE netcdf_data_input_mod, &
	1315	ONLY: building_id_f, building_type_f
[2696]	1316
	1317	USE pegrid
	1318
	1319	IMPLICIT NONE
	1320
	1321	INTEGER(iwp) :: i !< running index along x-direction
	1322	INTEGER(iwp) :: j !< running index along y-direction
	1323	INTEGER(iwp) :: k !< running index along z-direction
[4648]	1324	INTEGER(iwp) :: num_hole !< number of holes (in topography) resolved by only one grid point
	1325	INTEGER(iwp) :: num_hole_l !< number of holes (in topography) resolved by only one grid point on local PE
[2696]	1326	INTEGER(iwp) :: num_wall !< number of surrounding vertical walls for a single grid point
	1327
[2955]	1328	INTEGER(iwp), DIMENSION(:,:,:), ALLOCATABLE :: topo_tmp !< temporary 3D-topography used to fill holes
[4648]	1329	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo_3d !< 3D-topography array merging buildings and
	1330	!< orography
	1331
	1332	LOGICAL :: filled = .FALSE. !< flag indicating if holes were filled
	1333
[2696]	1334	!
[4648]	1335	!-- Before checking for holes, set lateral boundary conditions for
[2696]	1336	!-- topography. After hole-filling, boundary conditions must be set again.
[4648]	1337	!-- Several iterations are performed, in order to fill holes which might
[2696]	1338	!-- emerge by the filling-algorithm itself.
	1339	ALLOCATE( topo_tmp(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	1340	topo_tmp = 0
	1341
	1342	num_hole = 99999
[4648]	1343	DO WHILE ( num_hole > 0 )
[2696]	1344
[4648]	1345	num_hole = 0
[2696]	1346	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
[2955]	1347	!
[4648]	1348	!-- Exchange also building ID and type. Note, building_type is an one-byte variable.
	1349	IF ( building_id_f%from_file ) &
[2955]	1350	CALL exchange_horiz_2d_int( building_id_f%var, nys, nyn, nxl, nxr, nbgp )
[4648]	1351	IF ( building_type_f%from_file ) &
[3763]	1352	CALL exchange_horiz_2d_byte( building_type_f%var, nys, nyn, nxl, nxr, nbgp )
[2696]	1353
	1354	topo_tmp = topo_3d
	1355	!
[4648]	1356	!-- In case of non-cyclic lateral boundaries, assume lateral boundary to be a solid wall. Thus,
	1357	!-- intermediate spaces of one grid point between boundary and some topographic structure will be
	1358	!-- filled.
[2696]	1359	IF ( .NOT. bc_ns_cyc ) THEN
	1360	IF ( nys == 0 ) topo_tmp(:,-1,:) = IBCLR( topo_tmp(:,0,:), 0 )
	1361	IF ( nyn == ny ) topo_tmp(:,ny+1,:) = IBCLR( topo_tmp(:,ny,:), 0 )
	1362	ENDIF
	1363
	1364	IF ( .NOT. bc_lr_cyc ) THEN
	1365	IF ( nxl == 0 ) topo_tmp(:,:,-1) = IBCLR( topo_tmp(:,:,0), 0 )
[4648]	1366	IF ( nxr == nx ) topo_tmp(:,:,nx+1) = IBCLR( topo_tmp(:,:,nx), 0 )
[2696]	1367	ENDIF
	1368
	1369	num_hole_l = 0
	1370	DO i = nxl, nxr
	1371	DO j = nys, nyn
	1372	DO k = nzb+1, nzt
	1373	IF ( BTEST( topo_tmp(k,j,i), 0 ) ) THEN
	1374	num_wall = 0
[4648]	1375	IF ( .NOT. BTEST( topo_tmp(k,j-1,i), 0 ) ) num_wall = num_wall + 1
	1376	IF ( .NOT. BTEST( topo_tmp(k,j+1,i), 0 ) ) num_wall = num_wall + 1
	1377	IF ( .NOT. BTEST( topo_tmp(k,j,i-1), 0 ) ) num_wall = num_wall + 1
	1378	IF ( .NOT. BTEST( topo_tmp(k,j,i+1), 0 ) ) num_wall = num_wall + 1
	1379	IF ( .NOT. BTEST( topo_tmp(k-1,j,i), 0 ) ) num_wall = num_wall + 1
	1380	IF ( .NOT. BTEST( topo_tmp(k+1,j,i), 0 ) ) num_wall = num_wall + 1
[2696]	1381
	1382	IF ( num_wall >= 4 ) THEN
	1383	num_hole_l = num_hole_l + 1
	1384	!
[4648]	1385	!-- Clear flag 0 and set special flag ( bit 4) to indicate that new topography
	1386	!-- point is a result of filtering process.
[2696]	1387	topo_3d(k,j,i) = IBCLR( topo_3d(k,j,i), 0 )
[4314]	1388	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 4 )
[2696]	1389	!
[4648]	1390	!-- If filled grid point is occupied by a building, classify it as building grid
	1391	!-- point.
[2696]	1392	IF ( building_type_f%from_file ) THEN
[4648]	1393	IF ( building_type_f%var(j,i) /= building_type_f%fill .OR. &
	1394	building_type_f%var(j+1,i) /= building_type_f%fill .OR. &
	1395	building_type_f%var(j-1,i) /= building_type_f%fill .OR. &
	1396	building_type_f%var(j,i+1) /= building_type_f%fill .OR. &
	1397	building_type_f%var(j,i-1) /= building_type_f%fill ) THEN
[2696]	1398	!
	1399	!-- Set flag indicating building surfaces
	1400	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 2 )
	1401	!
[4648]	1402	!-- Set building_type and ID at this position if not already set. This is
	1403	!-- required for proper initialization of urban-surface energy balance
[2696]	1404	!-- solver.
[4648]	1405	IF ( building_type_f%var(j,i) == building_type_f%fill ) THEN
[2696]	1406
[4648]	1407	IF ( building_type_f%var(j+1,i) /= building_type_f%fill ) THEN
	1408	building_type_f%var(j,i) = building_type_f%var(j+1,i)
	1409	building_id_f%var(j,i) = building_id_f%var(j+1,i)
	1410	ELSEIF ( building_type_f%var(j-1,i) /= building_type_f%fill ) THEN
	1411	building_type_f%var(j,i) = building_type_f%var(j-1,i)
	1412	building_id_f%var(j,i) = building_id_f%var(j-1,i)
	1413	ELSEIF ( building_type_f%var(j,i+1) /= building_type_f%fill ) THEN
	1414	building_type_f%var(j,i) = building_type_f%var(j,i+1)
	1415	building_id_f%var(j,i) = building_id_f%var(j,i+1)
	1416	ELSEIF ( building_type_f%var(j,i-1) /= building_type_f%fill ) THEN
	1417	building_type_f%var(j,i) = building_type_f%var(j,i-1)
	1418	building_id_f%var(j,i) = building_id_f%var(j,i-1)
[2696]	1419	ENDIF
	1420	ENDIF
	1421	ENDIF
	1422	ENDIF
	1423	!
[4648]	1424	!-- If filled grid point is already classified as building everything is fine,
	1425	!-- else classify this grid point as natural type grid point. This case, values
	1426	!-- for the surface type are already set.
[2696]	1427	IF ( .NOT. BTEST( topo_3d(k,j,i), 2 ) ) THEN
	1428	topo_3d(k,j,i) = IBSET( topo_3d(k,j,i), 1 )
	1429	ENDIF
	1430	ENDIF
	1431	ENDIF
	1432	ENDDO
	1433	ENDDO
	1434	ENDDO
	1435	!
	1436	!-- Count the total number of holes, required for informative message.
	1437	#if defined( __parallel )
[4648]	1438	CALL MPI_ALLREDUCE( num_hole_l, num_hole, 1, MPI_INTEGER, MPI_SUM, comm2d, ierr )
[2696]	1439	#else
	1440	num_hole = num_hole_l
[4648]	1441	#endif
[2893]	1442	IF ( num_hole > 0 .AND. .NOT. filled ) filled = .TRUE.
[2696]	1443
[2893]	1444	ENDDO
[2696]	1445	!
[2893]	1446	!-- Create an informative message if any holes were filled.
	1447	IF ( filled ) THEN
[4648]	1448	WRITE( message_string, * ) 'Topography was filtered, i.e. holes ' // &
	1449	'resolved by only one grid point ' // &
[2893]	1450	'were filled during initialization.'
	1451	CALL message( 'init_grid', 'PA0430', 0, 0, 0, 6, 0 )
	1452	ENDIF
[2696]	1453
	1454	DEALLOCATE( topo_tmp )
	1455	!
[4648]	1456	!-- Finally, exchange topo_3d array again and if necessary set Neumann boundary condition in case of
	1457	!-- non-cyclic lateral boundaries.
[2696]	1458	CALL exchange_horiz_int( topo_3d, nys, nyn, nxl, nxr, nzt, nbgp )
	1459
	1460	IF ( .NOT. bc_ns_cyc ) THEN
	1461	IF ( nys == 0 ) topo_3d(:,-1,:) = topo_3d(:,0,:)
	1462	IF ( nyn == ny ) topo_3d(:,ny+1,:) = topo_3d(:,ny,:)
	1463	ENDIF
	1464
	1465	IF ( .NOT. bc_lr_cyc ) THEN
	1466	IF ( nxl == 0 ) topo_3d(:,:,-1) = topo_3d(:,:,0)
[4648]	1467	IF ( nxr == nx ) topo_3d(:,:,nx+1) = topo_3d(:,:,nx)
[2696]	1468	ENDIF
[2955]	1469	!
	1470	!-- Exchange building ID and type. Note, building_type is an one-byte variable.
[4648]	1471	IF ( building_id_f%from_file ) &
[2955]	1472	CALL exchange_horiz_2d_int( building_id_f%var, nys, nyn, nxl, nxr, nbgp )
[4648]	1473	IF ( building_type_f%from_file ) &
[3763]	1474	CALL exchange_horiz_2d_byte( building_type_f%var, nys, nyn, nxl, nxr, nbgp )
[2696]	1475
	1476	END SUBROUTINE filter_topography
	1477
	1478
	1479	! Description:
[4648]	1480	! -------------------------------------------------------------------------------------------------!
	1481	!> Reads topography information from file or sets generic topography. Moreover, all
	1482	!> topography-relevant topography arrays are initialized, and grid flags are set.
	1483	!--------------------------------------------------------------------------------------------------!
[2696]	1484	SUBROUTINE init_topo( topo )
	1485
[4648]	1486	USE arrays_3d, &
[2696]	1487	ONLY: zw
[4648]	1488
	1489	USE control_parameters, &
	1490	ONLY: bc_lr_cyc, bc_ns_cyc, building_height, building_length_x, building_length_y, &
	1491	building_wall_left, building_wall_south, canyon_height, canyon_wall_left, &
	1492	canyon_wall_south, canyon_width_x, canyon_width_y, dp_level_ind_b, dz, &
	1493	message_string, topography, topography_grid_convention, tunnel_height, &
	1494	tunnel_length, tunnel_width_x, tunnel_width_y, tunnel_wall_depth
	1495
	1496	USE exchange_horiz_mod, &
[4457]	1497	ONLY: exchange_horiz_int
	1498
[4648]	1499	USE grid_variables, &
[2696]	1500	ONLY: dx, dy
[4648]	1501
	1502	USE indices, &
	1503	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nz, nzb, nzt
	1504
[2696]	1505	USE kinds
	1506
[4648]	1507	USE netcdf_data_input_mod, &
	1508	ONLY: buildings_f, terrain_height_f
	1509
[2696]	1510	USE pegrid
	1511
	1512	IMPLICIT NONE
	1513
[4386]	1514	INTEGER(iwp) :: bh !< temporary vertical index of building height
[4648]	1515	INTEGER(iwp) :: ch !< temporary vertical index for canyon height
	1516	INTEGER(iwp) :: hv_in !< heavyside function to model inner tunnel surface
	1517	INTEGER(iwp) :: i !< index variable along x
[4386]	1518	INTEGER(iwp) :: index_left_bwall !< index for left building wall
[4648]	1519	INTEGER(iwp) :: index_north_bwall !< index for north building wall
[4386]	1520	INTEGER(iwp) :: index_right_bwall !< index for right building wall
	1521	INTEGER(iwp) :: index_south_bwall !< index for south building wall
	1522	INTEGER(iwp) :: index_left_cwall !< index for left canyon wall
[4648]	1523	INTEGER(iwp) :: index_north_cwall !< index for north canyon wall
[4386]	1524	INTEGER(iwp) :: index_right_cwall !< index for right canyon wall
	1525	INTEGER(iwp) :: index_south_cwall !< index for south canyon wall
	1526	INTEGER(iwp) :: j !< index variable along y
	1527	INTEGER(iwp) :: k !< index variable along z
[4648]	1528	INTEGER(iwp) :: ngp_bx !< grid point number of building size along x
	1529	INTEGER(iwp) :: ngp_by !< grid point number of building size along y
	1530	INTEGER(iwp) :: ngp_cx !< grid point number of canyon size along x
	1531	INTEGER(iwp) :: ngp_cy !< grid point number of canyon size along y
	1532	INTEGER(iwp) :: hv_out !< heavyside function to model outer tunnel surface
	1533	INTEGER(iwp) :: td !< tunnel wall depth
	1534	INTEGER(iwp) :: th !< height of outer tunnel wall
	1535	INTEGER(iwp) :: txe_in !< end position of inner tunnel wall in x
[4386]	1536	INTEGER(iwp) :: txe_out !< end position of outer tunnel wall in x
[4648]	1537	INTEGER(iwp) :: txs_in !< start position of inner tunnel wall in x
[4386]	1538	INTEGER(iwp) :: txs_out !< start position of outer tunnel wall in x
[4648]	1539	INTEGER(iwp) :: tye_in !< end position of inner tunnel wall in y
[4386]	1540	INTEGER(iwp) :: tye_out !< end position of outer tunnel wall in y
[4648]	1541	INTEGER(iwp) :: tys_in !< start position of inner tunnel wall in y
[4386]	1542	INTEGER(iwp) :: tys_out !< start position of outer tunnel wall in y
[2696]	1543
	1544	INTEGER(iwp), DIMENSION(:,:), ALLOCATABLE :: nzb_local !< index for topography top at cell-center
[4648]	1545	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting
	1546	!< "outer"-flags
[2696]	1547	!
[4648]	1548	!-- Check for correct setting of the namelist parameter topography. If topography information is
	1549	!-- read from file but topography = 'flat', initialization does not work properly.
	1550	IF ( ( buildings_f%from_file .OR. terrain_height_f%from_file ) .AND. &
[4189]	1551	TRIM( topography ) /= 'read_from_file' ) THEN
[4648]	1552	message_string = 'If topography information is provided (via ' // &
	1553	'Netcdf or ASCII input) topography = ' // &
[4189]	1554	'"read_from_file" is required.'
[4648]	1555	CALL message( 'init_grid', 'PA0437', 1, 2, 0, 6, 0 )
[4189]	1556	ENDIF
	1557	!
[1]	1558	!-- Set outer and inner index arrays for non-flat topography.
[4648]	1559	!-- Here consistency checks concerning domain size and periodicity are necessary.
	1560	!-- Within this SELECT CASE structure only nzb_local is initialized individually depending on the
	1561	!-- chosen topography type, all other index arrays are initialized further below.
[1]	1562	SELECT CASE ( TRIM( topography ) )
	1563
	1564	CASE ( 'flat' )
[4648]	1565	!
[2232]	1566	!-- Initialilize 3D topography array, used later for initializing flags
[4340]	1567	topo(nzb+1:nzt+1,:,:) = IBSET( topo(nzb+1:nzt+1,:,:), 0 )
[4648]	1568
[4340]	1569	CASE ( 'closed_channel' )
[4648]	1570	!
[4340]	1571	!-- Initialilize 3D topography array, used later for initializing flags
[4648]	1572	topo(nzb+1:nzt,:,:) = IBSET( topo(nzb+1:nzt,:,:), 0 )
[1]	1573
	1574	CASE ( 'single_building' )
	1575	!
	1576	!-- Single rectangular building, by default centered in the middle of the
	1577	!-- total domain
[4386]	1578	ngp_bx = NINT( building_length_x / dx )
	1579	ngp_by = NINT( building_length_y / dy )
[2232]	1580	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
[4648]	1581	IF ( ABS( zw(bh) - building_height ) == ABS( zw(bh+1) - building_height ) ) bh = bh + 1
[1322]	1582	IF ( building_wall_left == 9999999.9_wp ) THEN
[4386]	1583	building_wall_left = ( nx + 1 - ngp_bx ) / 2 * dx
[1]	1584	ENDIF
[4386]	1585	index_left_bwall = NINT( building_wall_left / dx )
	1586	index_right_bwall = index_left_bwall + ngp_bx
[1]	1587
[1322]	1588	IF ( building_wall_south == 9999999.9_wp ) THEN
[4386]	1589	building_wall_south = ( ny + 1 - ngp_by ) / 2 * dy
[1]	1590	ENDIF
[4386]	1591	index_south_bwall = NINT( building_wall_south / dy )
	1592	index_north_bwall = index_south_bwall + ngp_by
[1]	1593
	1594	!
	1595	!-- Building size has to meet some requirements
[4648]	1596	IF ( ( index_left_bwall < 1 ) .OR. ( index_right_bwall > nx-1 ) .OR. &
	1597	( index_right_bwall < index_left_bwall+3 ) .OR. &
	1598	( index_south_bwall < 1 ) .OR. ( index_north_bwall > ny-1 ) .OR. &
[4386]	1599	( index_north_bwall < index_south_bwall+3 ) ) THEN
[4648]	1600	WRITE( message_string, * ) 'inconsistent building parameters:', &
	1601	'&index_left_bwall=', index_left_bwall, &
	1602	'index_right_bwall=', index_right_bwall, &
	1603	'index_south_bwall=', index_south_bwall, &
	1604	'index_north_bwall=', index_north_bwall, &
[4386]	1605	'nx=', nx, 'ny=', ny
[254]	1606	CALL message( 'init_grid', 'PA0203', 1, 2, 0, 6, 0 )
[1]	1607	ENDIF
	1608
[2696]	1609	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
[2892]	1610	nzb_local = 0
[1]	1611	!
[4648]	1612	!-- Define the building.
	1613	IF ( index_left_bwall <= nxr .AND. index_right_bwall >= nxl .AND. &
	1614	index_south_bwall <= nyn .AND. index_north_bwall >= nys ) &
	1615	nzb_local(MAX(nys,index_south_bwall):MIN(nyn,index_north_bwall), &
[4386]	1616	MAX(nxl,index_left_bwall):MIN(nxr,index_right_bwall)) = bh
[2232]	1617	!
[2696]	1618	!-- Set bit array on basis of nzb_local
	1619	DO i = nxl, nxr
	1620	DO j = nys, nyn
[4648]	1621	topo(nzb_local(j,i)+1:nzt+1,j,i) = IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
[2232]	1622	ENDDO
	1623	ENDDO
[4648]	1624
[2696]	1625	DEALLOCATE( nzb_local )
[2232]	1626
[2696]	1627	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1628	!
[4648]	1629	!-- Set boundary conditions also for flags. Can be interpreted as Neumannb oundary conditions
	1630	!-- for topography.
[2823]	1631	IF ( .NOT. bc_ns_cyc ) THEN
	1632	IF ( nys == 0 ) THEN
[4648]	1633	DO i = 1, nbgp
[2823]	1634	topo(:,nys-i,:) = topo(:,nys,:)
	1635	ENDDO
	1636	ENDIF
	1637	IF ( nyn == ny ) THEN
[4648]	1638	DO i = 1, nbgp
[2823]	1639	topo(:,nyn+i,:) = topo(:,nyn,:)
	1640	ENDDO
	1641	ENDIF
	1642	ENDIF
	1643	IF ( .NOT. bc_lr_cyc ) THEN
	1644	IF ( nxl == 0 ) THEN
[4648]	1645	DO i = 1, nbgp
[2823]	1646	topo(:,:,nxl-i) = topo(:,:,nxl)
	1647	ENDDO
	1648	ENDIF
[4648]	1649	IF ( nxr == nx ) THEN
	1650	DO i = 1, nbgp
	1651	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1652	ENDDO
[4648]	1653	ENDIF
[2823]	1654	ENDIF
[2232]	1655
[240]	1656	CASE ( 'single_street_canyon' )
	1657	!
	1658	!-- Single quasi-2D street canyon of infinite length in x or y direction.
	1659	!-- The canyon is centered in the other direction by default.
[1322]	1660	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[240]	1661	!
	1662	!-- Street canyon in y direction
[4386]	1663	ngp_cx = NINT( canyon_width_x / dx )
[1322]	1664	IF ( canyon_wall_left == 9999999.9_wp ) THEN
[4386]	1665	canyon_wall_left = ( nx + 1 - ngp_cx ) / 2 * dx
[240]	1666	ENDIF
[4386]	1667	index_left_cwall= NINT( canyon_wall_left / dx )
	1668	index_right_cwall= index_left_cwall+ ngp_cx
[1322]	1669	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[240]	1670	!
	1671	!-- Street canyon in x direction
[4386]	1672	ngp_cy = NINT( canyon_width_y / dy )
[1322]	1673	IF ( canyon_wall_south == 9999999.9_wp ) THEN
[4386]	1674	canyon_wall_south = ( ny + 1 - ngp_cy ) / 2 * dy
[240]	1675	ENDIF
[4386]	1676	index_south_cwall = NINT( canyon_wall_south / dy )
	1677	index_north_cwall = index_south_cwall + ngp_cy
[4648]	1678
[240]	1679	ELSE
[4648]	1680
[254]	1681	message_string = 'no street canyon width given'
	1682	CALL message( 'init_grid', 'PA0204', 1, 2, 0, 6, 0 )
[4648]	1683
[240]	1684	ENDIF
	1685
[2232]	1686	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
[4648]	1687	IF ( ABS( zw(ch) - canyon_height ) == ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
[240]	1688	dp_level_ind_b = ch
	1689	!
	1690	!-- Street canyon size has to meet some requirements
[1322]	1691	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[4648]	1692	IF ( ( index_left_cwall< 1 ) .OR. ( index_right_cwall> nx-1 ) .OR. &
[4543]	1693	( ngp_cx < 3 ) ) THEN
[4648]	1694	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
	1695	'&index_left_cwall=', index_left_cwall, &
	1696	' index_right_cwall=', index_right_cwall, &
	1697	' ngp_cx=', ngp_cx, ' ch=', ch, ' nx=', nx, ' ny=', ny
	1698	CALL message( 'init_grid', 'PA0205', 1, 2, 0, 6, 0 )
[240]	1699	ENDIF
[1322]	1700	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[4648]	1701	IF ( ( index_south_cwall < 1 ) .OR. &
	1702	( index_north_cwall > ny-1 ) .OR. ( ngp_cy < 3 ) ) THEN
	1703	WRITE( message_string, * ) 'inconsistent canyon parameters:', &
	1704	'&index_south_cwall=', index_south_cwall, &
	1705	' index_north_cwall=', index_north_cwall, &
	1706	' ngp_cy=', ngp_cy, ' ch=', ch, ' nx=', nx, ' ny=', ny
	1707	CALL message( 'init_grid', 'PA0206', 1, 2, 0, 6, 0 )
[240]	1708	ENDIF
	1709	ENDIF
[4648]	1710	IF ( canyon_width_x /= 9999999.9_wp .AND. canyon_width_y /= 9999999.9_wp ) THEN
	1711	message_string = 'inconsistent canyon parameters:' // &
	1712	'&street canyon can only be oriented' // &
[3045]	1713	' either in x- or in y-direction'
[254]	1714	CALL message( 'init_grid', 'PA0207', 1, 2, 0, 6, 0 )
[240]	1715	ENDIF
	1716
[2696]	1717	ALLOCATE( nzb_local(nysg:nyng,nxlg:nxrg) )
[240]	1718	nzb_local = ch
[1322]	1719	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[4648]	1720	IF ( index_left_cwall<= nxr .AND. index_right_cwall>= nxl ) &
[4386]	1721	nzb_local(:,MAX(nxl,index_left_cwall+1):MIN(nxr,index_right_cwall-1)) = 0
[1322]	1722	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[4648]	1723	IF ( index_south_cwall <= nyn .AND. index_north_cwall >= nys ) &
[4386]	1724	nzb_local(MAX(nys,index_south_cwall+1):MIN(nyn,index_north_cwall-1),:) = 0
[240]	1725	ENDIF
[2232]	1726	!
[2696]	1727	!-- Set bit array on basis of nzb_local
	1728	DO i = nxl, nxr
	1729	DO j = nys, nyn
[4648]	1730	topo(nzb_local(j,i)+1:nzt+1,j,i) = IBSET( topo(nzb_local(j,i)+1:nzt+1,j,i), 0 )
[2232]	1731	ENDDO
	1732	ENDDO
[2696]	1733	DEALLOCATE( nzb_local )
[1994]	1734
[2696]	1735	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1736	!
[4648]	1737	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions
	1738	!-- for topography.
[2823]	1739	IF ( .NOT. bc_ns_cyc ) THEN
	1740	IF ( nys == 0 ) THEN
[4648]	1741	DO i = 1, nbgp
	1742	topo(:,nys-i,:) = topo(:,nys,:)
[2823]	1743	ENDDO
	1744	ENDIF
	1745	IF ( nyn == ny ) THEN
[4648]	1746	DO i = 1, nbgp
[2823]	1747	topo(:,nyn+i,:) = topo(:,nyn,:)
	1748	ENDDO
	1749	ENDIF
	1750	ENDIF
	1751	IF ( .NOT. bc_lr_cyc ) THEN
	1752	IF ( nxl == 0 ) THEN
[4648]	1753	DO i = 1, nbgp
	1754	topo(:,:,nxl-i) = topo(:,:,nxl)
[2823]	1755	ENDDO
	1756	ENDIF
[4648]	1757	IF ( nxr == nx ) THEN
	1758	DO i = 1, nbgp
	1759	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1760	ENDDO
[4648]	1761	ENDIF
[2823]	1762	ENDIF
[2232]	1763
	1764	CASE ( 'tunnel' )
	1765
	1766	!
	1767	!-- Tunnel height
	1768	IF ( tunnel_height == 9999999.9_wp ) THEN
	1769	th = zw( INT( 0.2 * nz) )
	1770	ELSE
	1771	th = tunnel_height
	1772	ENDIF
	1773	!
	1774	!-- Tunnel-wall depth
[4648]	1775	IF ( tunnel_wall_depth == 9999999.9_wp ) THEN
[3065]	1776	td = MAX ( dx, dy, dz(1) )
[2232]	1777	ELSE
	1778	td = tunnel_wall_depth
	1779	ENDIF
	1780	!
	1781	!-- Check for tunnel width
[4648]	1782	IF ( tunnel_width_x == 9999999.9_wp .AND. tunnel_width_y == 9999999.9_wp ) THEN
[2232]	1783	message_string = 'No tunnel width is given. '
[2274]	1784	CALL message( 'init_grid', 'PA0280', 1, 2, 0, 6, 0 )
[2232]	1785	ENDIF
[4648]	1786	IF ( tunnel_width_x /= 9999999.9_wp .AND. tunnel_width_y /= 9999999.9_wp ) THEN
	1787	message_string = 'Inconsistent tunnel parameters:' // &
	1788	'tunnel can only be oriented' // &
[2232]	1789	'either in x- or in y-direction.'
[2274]	1790	CALL message( 'init_grid', 'PA0281', 1, 2, 0, 6, 0 )
[2232]	1791	ENDIF
	1792	!
[4356]	1793	!-- Check for too small tunnel width in x- and y-direction
[4648]	1794	IF ( tunnel_width_x /= 9999999.9_wp .AND. &
[4356]	1795	tunnel_width_x - 2.0_wp * td <= 2.0_wp * dx ) THEN
	1796	message_string = 'tunnel_width_x too small'
	1797	CALL message( 'init_grid', 'PA0175', 1, 2, 0, 6, 0 )
	1798	ENDIF
[4648]	1799	IF ( tunnel_width_y /= 9999999.9_wp .AND. &
[4356]	1800	tunnel_width_y - 2.0_wp * td <= 2.0_wp * dy ) THEN
	1801	message_string = 'tunnel_width_y too small'
	1802	CALL message( 'init_grid', 'PA0455', 1, 2, 0, 6, 0 )
	1803	ENDIF
	1804	!
[4648]	1805	!-- Check for too large tunnel width.
[4356]	1806	!-- Tunnel axis along y.
[2232]	1807	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
	1808	IF ( tunnel_width_x > ( nx + 1 ) * dx ) THEN
[4356]	1809	message_string = 'tunnel_width_x too large'
[2274]	1810	CALL message( 'init_grid', 'PA0282', 1, 2, 0, 6, 0 )
[2232]	1811	ENDIF
	1812
	1813	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_width_x * 0.5_wp )
	1814	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_width_x * 0.5_wp )
[4648]	1815	txs_in = INT( ( nx + 1 ) * 0.5_wp * dx - ( tunnel_width_x * 0.5_wp - td ) )
	1816	txe_in = INT( ( nx + 1 ) * 0.5_wp * dx + ( tunnel_width_x * 0.5_wp - td ) )
[2232]	1817
	1818	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_length * 0.5_wp )
	1819	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_length * 0.5_wp )
	1820	tys_in = tys_out
	1821	tye_in = tye_out
	1822	ENDIF
	1823	!
[4356]	1824	!-- Tunnel axis along x.
[2232]	1825	IF ( tunnel_width_y /= 9999999.9_wp ) THEN
	1826	IF ( tunnel_width_y > ( ny + 1 ) * dy ) THEN
[4356]	1827	message_string = 'tunnel_width_y too large'
[2274]	1828	CALL message( 'init_grid', 'PA0456', 1, 2, 0, 6, 0 )
[2232]	1829	ENDIF
	1830
	1831	txs_out = INT( ( nx + 1 ) * 0.5_wp * dx - tunnel_length * 0.5_wp )
	1832	txe_out = INT( ( nx + 1 ) * 0.5_wp * dx + tunnel_length * 0.5_wp )
	1833	txs_in = txs_out
	1834	txe_in = txe_out
	1835
	1836	tys_out = INT( ( ny + 1 ) * 0.5_wp * dy - tunnel_width_y * 0.5_wp )
	1837	tye_out = INT( ( ny + 1 ) * 0.5_wp * dy + tunnel_width_y * 0.5_wp )
[4648]	1838	tys_in = INT( ( ny + 1 ) * 0.5_wp * dy - ( tunnel_width_y * 0.5_wp - td ) )
	1839	tye_in = INT( ( ny + 1 ) * 0.5_wp * dy + ( tunnel_width_y * 0.5_wp - td ) )
[2232]	1840	ENDIF
	1841
[2696]	1842	topo = 0
[2232]	1843	DO i = nxl, nxr
	1844	DO j = nys, nyn
	1845	!
	1846	!-- Use heaviside function to model outer tunnel surface
[4648]	1847	hv_out = th * 0.5_wp * ( ( SIGN( 1.0_wp, i * dx - txs_out ) + 1.0_wp ) &
	1848	- ( SIGN( 1.0_wp, i * dx - txe_out ) + 1.0_wp ) )
[2232]	1849
[4648]	1850	hv_out = hv_out * 0.5_wp * ( ( SIGN( 1.0_wp, j * dy - tys_out ) + 1.0_wp ) &
	1851	- ( SIGN( 1.0_wp, j * dy - tye_out ) + 1.0_wp ) )
	1852	!
[2232]	1853	!-- Use heaviside function to model inner tunnel surface
[4648]	1854	hv_in = ( th - td ) * 0.5_wp * ( ( SIGN( 1.0_wp, i * dx - txs_in ) + 1.0_wp ) &
	1855	- ( SIGN( 1.0_wp, i * dx - txe_in ) + 1.0_wp ) )
[2232]	1856
[4648]	1857	hv_in = hv_in * 0.5_wp * ( ( SIGN( 1.0_wp, j * dy - tys_in ) + 1.0_wp ) &
	1858	- ( SIGN( 1.0_wp, j * dy - tye_in ) + 1.0_wp ) )
[2232]	1859	!
	1860	!-- Set flags at x-y-positions without any tunnel surface
	1861	IF ( hv_out - hv_in == 0.0_wp ) THEN
[2696]	1862	topo(nzb+1:nzt+1,j,i) = IBSET( topo(nzb+1:nzt+1,j,i), 0 )
[2232]	1863	!
	1864	!-- Set flags at x-y-positions with tunnel surfaces
	1865	ELSE
	1866	DO k = nzb + 1, nzt + 1
	1867	!
	1868	!-- Inner tunnel
	1869	IF ( hv_out - hv_in == th ) THEN
	1870	IF ( zw(k) <= hv_out ) THEN
[2696]	1871	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
[2232]	1872	ELSE
[2696]	1873	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	1874	ENDIF
	1875	ENDIF
	1876	!
	1877	!-- Lateral tunnel walls
	1878	IF ( hv_out - hv_in == td ) THEN
[4648]	1879	IF ( zw(k) <= hv_in ) THEN
[2696]	1880	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[4648]	1881	ELSEIF ( zw(k) > hv_in .AND. zw(k) <= hv_out ) THEN
[2696]	1882	topo(k,j,i) = IBCLR( topo(k,j,i), 0 )
[4648]	1883	ELSEIF ( zw(k) > hv_out ) THEN
[2696]	1884	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	1885	ENDIF
	1886	ENDIF
	1887	ENDDO
	1888	ENDIF
	1889	ENDDO
	1890	ENDDO
	1891
[2696]	1892	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2823]	1893	!
[4648]	1894	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions
	1895	!-- for topography.
[2823]	1896	IF ( .NOT. bc_ns_cyc ) THEN
	1897	IF ( nys == 0 ) THEN
[4648]	1898	DO i = 1, nbgp
	1899	topo(:,nys-i,:) = topo(:,nys,:)
[2823]	1900	ENDDO
	1901	ENDIF
	1902	IF ( nyn == ny ) THEN
[4648]	1903	DO i = 1, nbgp
[2823]	1904	topo(:,nyn+i,:) = topo(:,nyn,:)
	1905	ENDDO
	1906	ENDIF
	1907	ENDIF
	1908	IF ( .NOT. bc_lr_cyc ) THEN
	1909	IF ( nxl == 0 ) THEN
[4648]	1910	DO i = 1, nbgp
	1911	topo(:,:,nxl-i) = topo(:,:,nxl)
[2823]	1912	ENDDO
	1913	ENDIF
[4648]	1914	IF ( nxr == nx ) THEN
	1915	DO i = 1, nbgp
	1916	topo(:,:,nxr+i) = topo(:,:,nxr)
[2823]	1917	ENDDO
[4648]	1918	ENDIF
[2823]	1919	ENDIF
[2232]	1920
[1]	1921	CASE ( 'read_from_file' )
	1922	!
[4648]	1923	!-- Note, topography information have been already read.
	1924	!-- If required, further process topography, i.e. reference buildings on top of orography and
	1925	!-- set temporary 3D topography array, which is used later to set grid flags. Calling of this
	1926	!-- rouinte is also required in case of ASCII input, even though no distinction between
	1927	!-- terrain- and building height is made in this case.
[2696]	1928	CALL process_topography( topo )
[1968]	1929	!
[2696]	1930	!-- Filter holes resolved by only one grid-point
	1931	CALL filter_topography( topo )
[1968]	1932	!
[4648]	1933	!-- Exchange ghost-points, as well as add cyclic or Neumann boundary conditions.
[2696]	1934	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	1935	!
[4314]	1936	!-- Set lateral boundary conditions for topography on all ghost layers
[1968]	1937	IF ( .NOT. bc_ns_cyc ) THEN
[2550]	1938	IF ( nys == 0 ) THEN
[4648]	1939	DO i = 1, nbgp
[2696]	1940	topo(:,nys-i,:) = topo(:,nys,:)
	1941	ENDDO
[2550]	1942	ENDIF
[2696]	1943	IF ( nyn == ny ) THEN
[4648]	1944	DO i = 1, nbgp
[2696]	1945	topo(:,nyn+i,:) = topo(:,nyn,:)
	1946	ENDDO
	1947	ENDIF
[1942]	1948	ENDIF
[1910]	1949
[1968]	1950	IF ( .NOT. bc_lr_cyc ) THEN
[2550]	1951	IF ( nxl == 0 ) THEN
[4648]	1952	DO i = 1, nbgp
[2696]	1953	topo(:,:,nxl-i) = topo(:,:,nxl)
[2232]	1954	ENDDO
[2696]	1955	ENDIF
	1956	IF ( nxr == nx ) THEN
[4648]	1957	DO i = 1, nbgp
[2696]	1958	topo(:,:,nxr+i) = topo(:,:,nxr)
	1959	ENDDO
	1960	ENDIF
[2232]	1961	ENDIF
	1962
[667]	1963
[1]	1964	CASE DEFAULT
[4648]	1965	!
	1966	!-- The DEFAULT case is reached either if the parameter topography contains a wrong character
	1967	!-- string or if the user has defined a special case in the user interface. There, the
	1968	!-- subroutine user_init_grid checks which of these two conditions applies.
[2696]	1969	CALL user_init_grid( topo )
	1970	CALL filter_topography( topo )
[1]	1971
	1972	END SELECT
	1973	!
[4648]	1974	!-- Consistency checks and index array initialization are only required for non-flat topography.
[1]	1975	IF ( TRIM( topography ) /= 'flat' ) THEN
	1976	!
[4648]	1977	!-- In case of non-flat topography, check whether the convention how to define the topography
	1978	!-- grid has been set correctly, or whether the default is applicable. If this is not possible,
	1979	!-- abort.
[2232]	1980	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
[4648]	1981	IF ( TRIM( topography ) /= 'closed_channel' .AND. &
	1982	TRIM( topography ) /= 'single_building' .AND. &
	1983	TRIM( topography ) /= 'single_street_canyon' .AND. &
	1984	TRIM( topography ) /= 'tunnel' .AND. &
[2232]	1985	TRIM( topography ) /= 'read_from_file') THEN
[4648]	1986	!-- The default value is not applicable here, because it is only valid for the four
	1987	!-- standard cases 'single_building', 'single_street_canyon', 'tunnel' and 'read_from_file'
[2232]	1988	!-- defined in init_grid.
[4648]	1989	WRITE( message_string, * ) 'The value for "topography_grid_convention" ', &
	1990	'is not set. Its default value is & only valid for ', &
	1991	'"topography" = ''single_building'', ''tunnel'' ', &
	1992	'''single_street_canyon'', ''closed_channel'' & or ', &
	1993	'''read_from_file''.', &
	1994	'& Choose ''cell_edge'' or ''cell_center''.'
[2232]	1995	CALL message( 'init_grid', 'PA0239', 1, 2, 0, 6, 0 )
	1996	ELSE
	1997	!-- The default value is applicable here.
	1998	!-- Set convention according to topography.
[4648]	1999	IF ( TRIM( topography ) == 'single_building' .OR. &
[2232]	2000	TRIM( topography ) == 'single_street_canyon' ) THEN
	2001	topography_grid_convention = 'cell_edge'
[4648]	2002	ELSEIF ( TRIM( topography ) == 'read_from_file' .OR. &
[2232]	2003	TRIM( topography ) == 'tunnel') THEN
	2004	topography_grid_convention = 'cell_center'
	2005	ENDIF
	2006	ENDIF
[4648]	2007	ELSEIF ( TRIM( topography_grid_convention ) /= 'cell_edge' .AND. &
[2232]	2008	TRIM( topography_grid_convention ) /= 'cell_center' ) THEN
[4648]	2009	WRITE( message_string, * ) 'The value for "topography_grid_convention" is ', &
	2010	'not recognized.& Choose ''cell_edge'' or ''cell_center''.'
[2232]	2011	CALL message( 'init_grid', 'PA0240', 1, 2, 0, 6, 0 )
	2012	ENDIF
[1]	2013
[2169]	2014
[217]	2015	IF ( topography_grid_convention == 'cell_edge' ) THEN
[4648]	2016	!
	2017	!-- The array nzb_local as defined using the 'cell_edge' convention
	2018	!-- describes the actual total size of topography which is defined at the
	2019	!-- cell edges where u=0 on the topography walls in x-direction and v=0
[217]	2020	!-- on the topography walls in y-direction. However, PALM uses individual
	2021	!-- arrays nzb_u\|v\|w\|s_inner\|outer that are based on nzb_s_inner.
[4648]	2022	!-- Therefore, the extent of topography in nzb_local is now reduced by
	2023	!-- 1dx at the E topography walls and by 1dy at the N topography walls
	2024	!-- to form the basis for nzb_s_inner.
[1968]	2025	!-- Note, the reverse memory access (i-j instead of j-i) is absolutely
	2026	!-- required at this point.
	2027	DO j = nys+1, nyn+1
	2028	DO i = nxl-1, nxr
[2232]	2029	DO k = nzb, nzt+1
[4648]	2030	IF ( BTEST( topo(k,j,i), 0 ) .OR. BTEST( topo(k,j,i+1), 0 ) ) &
[2696]	2031	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	2032	ENDDO
	2033	ENDDO
[4648]	2034	ENDDO
[2696]	2035	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	2036
	2037	DO i = nxl, nxr+1
	2038	DO j = nys-1, nyn
	2039	DO k = nzb, nzt+1
[4648]	2040	IF ( BTEST( topo(k,j,i), 0 ) .OR. BTEST( topo(k,j+1,i), 0 ) ) &
[2696]	2041	topo(k,j,i) = IBSET( topo(k,j,i), 0 )
[2232]	2042	ENDDO
	2043	ENDDO
[4648]	2044	ENDDO
[2696]	2045	CALL exchange_horiz_int( topo, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2046
[217]	2047	ENDIF
[2696]	2048	ENDIF
[2232]	2049
[1]	2050
[2696]	2051	END SUBROUTINE init_topo
[1]	2052
[2696]	2053	SUBROUTINE set_topo_flags(topo)
[1]	2054
[4648]	2055	USE control_parameters, &
	2056	ONLY: bc_lr_cyc, bc_ns_cyc, constant_flux_layer, scalar_advec, topography, &
	2057	use_surface_fluxes, use_top_fluxes
[1]	2058
[4648]	2059	USE exchange_horiz_mod, &
[4457]	2060	ONLY: exchange_horiz_int
	2061
[4648]	2062	USE indices, &
	2063	ONLY: nbgp, nx, nxl, nxlg, nxr, nxrg, ny, nyn, nyng, nys, nysg, nzb, nzt, topo_top_ind, &
	2064	wall_flags_static_0, wall_flags_total_0
[1]	2065
[2696]	2066	USE kinds
[1]	2067
[2696]	2068	IMPLICIT NONE
[1804]	2069
[2696]	2070	INTEGER(iwp) :: i !< index variable along x
[4168]	2071	INTEGER(iwp) :: ibit !< integer bit position of topgraphy masking array
[2696]	2072	INTEGER(iwp) :: j !< index variable along y
	2073	INTEGER(iwp) :: k !< index variable along z
[1]	2074
[4648]	2075	INTEGER(iwp), DIMENSION(nzb:nzt+1,nysg:nyng,nxlg:nxrg) :: topo !< input array for 3D topography and dummy array for setting
	2076	!< "outer"-flags
[2232]	2077
[4329]	2078	ALLOCATE( wall_flags_static_0(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2079	wall_flags_static_0 = 0
[2232]	2080	!
[2696]	2081	!-- Set-up topography flags. First, set flags only for s, u, v and w-grid.
[4648]	2082	!-- Further special flags will be set in following loops.
[2232]	2083	DO i = nxl, nxr
	2084	DO j = nys, nyn
	2085	DO k = nzb, nzt+1
	2086	!
	2087	!-- scalar grid
[4648]	2088	IF ( BTEST( topo(k,j,i), 0 ) ) &
[4329]	2089	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 0 )
[2232]	2090	!
[2696]	2091	!-- u grid
[4648]	2092	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k,j,i-1), 0 ) ) &
[4329]	2093	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 1 )
[2696]	2094	!
[2232]	2095	!-- v grid
[4648]	2096	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k,j-1,i), 0 ) ) &
[4329]	2097	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 2 )
[2696]	2098
[2232]	2099	ENDDO
[1]	2100
[2232]	2101	DO k = nzb, nzt
[1]	2102	!
[2232]	2103	!-- w grid
[4648]	2104	IF ( BTEST( topo(k,j,i), 0 ) .AND. BTEST( topo(k+1,j,i), 0 ) ) &
[4329]	2105	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 3 )
[2232]	2106	ENDDO
[4648]	2107
	2108	IF ( topography /= 'closed_channel' ) THEN
[4340]	2109	wall_flags_static_0(nzt+1,j,i) = IBSET( wall_flags_static_0(nzt+1,j,i), 3 )
	2110	ENDIF
[2232]	2111
	2112	ENDDO
	2113	ENDDO
[2696]	2114
[4329]	2115	CALL exchange_horiz_int( wall_flags_static_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4346]	2116
[1]	2117	!
[4648]	2118	!-- Set outer array for scalars to mask near-surface grid points. Note, on basis of flag 24 futher
	2119	!-- flags will be derived which are used to control production of subgrid TKE production near walls.
	2120
[4346]	2121	ALLOCATE( wall_flags_total_0(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	2122	wall_flags_total_0 = 0
[4648]	2123
[2696]	2124	DO i = nxl, nxr
	2125	DO j = nys, nyn
[2232]	2126	DO k = nzb, nzt+1
[4346]	2127	wall_flags_total_0(k,j,i) = IOR( wall_flags_total_0(k,j,i), wall_flags_static_0(k,j,i) )
[2232]	2128	ENDDO
	2129	ENDDO
	2130	ENDDO
[4648]	2131
[4346]	2132	CALL exchange_horiz_int( wall_flags_total_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2133
[4346]	2134	DO i = nxl, nxr
	2135	DO j = nys, nyn
	2136	DO k = nzb, nzt+1
[4648]	2137	IF ( BTEST( wall_flags_total_0(k,j-1,i), 0 ) .AND. &
	2138	BTEST( wall_flags_total_0(k,j+1,i), 0 ) .AND. &
	2139	BTEST( wall_flags_total_0(k,j,i-1), 0 ) .AND. &
	2140	BTEST( wall_flags_total_0(k,j,i+1), 0 ) .AND. &
	2141	BTEST( wall_flags_total_0(k,j-1,i-1), 0 ) .AND. &
	2142	BTEST( wall_flags_total_0(k,j+1,i-1), 0 ) .AND. &
	2143	BTEST( wall_flags_total_0(k,j-1,i+1), 0 ) .AND. &
	2144	BTEST( wall_flags_total_0(k,j+1,i+1), 0 ) ) &
[4346]	2145	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 24 )
	2146	ENDDO
	2147	ENDDO
	2148	ENDDO
[1]	2149	!
[2232]	2150	!-- Set further special flags
	2151	DO i = nxl, nxr
	2152	DO j = nys, nyn
	2153	DO k = nzb, nzt+1
[1]	2154	!
[2232]	2155	!-- scalar grid, former nzb_diff_s_inner.
[4648]	2156	!-- Note, use this flag also to mask topography in diffusion_u and diffusion_v along the
	2157	!-- vertical direction. In case of use_surface_fluxes, fluxes are calculated via MOST,
	2158	!-- else, simple gradient approach is applied. Please note, in case of u- and v-diffuison,
	2159	!-- a small error is made at edges (on the east side for u, at the north side for v), since
	2160	!-- topography on scalar grid point is used instead of topography on u/v-grid. As number of
	2161	!-- topography grid points on uv-grid is different than s-grid, different number of surface
	2162	!-- elements would be required. In order to avoid this, treat edges (u(k,j,i+1)) simply by
	2163	!-- a gradient approach, i.e. these points are not masked within diffusion_u. Tests had
	2164	!-- shown that the effect on the flow is negligible.
[2232]	2165	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2166	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2167	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 8 )
[2232]	2168	ELSE
[4346]	2169	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 8 )
[2232]	2170	ENDIF
[1]	2171
[2232]	2172	ENDDO
	2173	!
[4648]	2174	!-- Special flag to control vertical diffusion at model top - former nzt_diff
[4346]	2175	wall_flags_total_0(:,j,i) = IBSET( wall_flags_total_0(:,j,i), 9 )
[2232]	2176	IF ( use_top_fluxes ) &
[4346]	2177	wall_flags_total_0(nzt+1,j,i) = IBCLR( wall_flags_total_0(nzt+1,j,i), 9 )
[1]	2178
[2696]	2179
[2232]	2180	DO k = nzb+1, nzt
	2181	!
[4648]	2182	!-- Special flag on u grid, former nzb_u_inner + 1, required for disturb_field and
	2183	!-- initialization. Do not disturb directly at topography, as well as initialize u with
	2184	!-- zero one grid point outside of topography.
	2185	IF ( BTEST( wall_flags_total_0(k-1,j,i), 1 ) .AND. &
	2186	BTEST( wall_flags_total_0(k,j,i), 1 ) .AND. &
	2187	BTEST( wall_flags_total_0(k+1,j,i), 1 ) ) &
[4346]	2188	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 20 )
[2232]	2189	!
[4648]	2190	!-- Special flag on v grid, former nzb_v_inner + 1, required for disturb_field and
	2191	!-- initialization. Do not disturb directly at topography, as well as initialize v with
	2192	!-- zero one grid point outside of topography.
	2193	IF ( BTEST( wall_flags_total_0(k-1,j,i), 2 ) .AND. &
	2194	BTEST( wall_flags_total_0(k,j,i), 2 ) .AND. &
	2195	BTEST( wall_flags_total_0(k+1,j,i), 2 ) ) &
[4346]	2196	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 21 )
[2232]	2197	!
[4648]	2198	!-- Special flag on scalar grid, former nzb_s_inner+1. Used for lpm_sgs_tke
	2199	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2200	BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2201	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2202	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 25 )
[2232]	2203	!
[4648]	2204	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in in production_e
[2232]	2205	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2206	IF ( BTEST( wall_flags_total_0(k,j,i), 24 ) .AND. &
	2207	BTEST( wall_flags_total_0(k-1,j,i), 24 ) .AND. &
	2208	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2209	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 29 )
[2232]	2210	ELSE
[4648]	2211	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2212	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 29 )
[1]	2213	ENDIF
[2232]	2214	!
[4648]	2215	!-- Special flag on scalar grid, nzb_diff_s_outer - 1, required in
[2232]	2216	!-- in production_e
	2217	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2218	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2219	BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2220	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2221	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 30 )
[2232]	2222	ELSE
[4648]	2223	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
[4346]	2224	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 30 )
[2232]	2225	ENDIF
	2226	ENDDO
	2227	!
	2228	!-- Flags indicating downward facing walls
[4340]	2229	DO k = nzb+1, nzt+1
[2232]	2230	!
	2231	!-- Scalar grid
[4648]	2232	IF ( BTEST( wall_flags_total_0(k-1,j,i), 0 ) .AND. &
	2233	.NOT. BTEST( wall_flags_total_0(k,j,i), 0 ) ) &
	2234	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 13 )
[2232]	2235	!
	2236	!-- Downward facing wall on u grid
[4648]	2237	IF ( BTEST( wall_flags_total_0(k-1,j,i), 1 ) .AND. &
	2238	.NOT. BTEST( wall_flags_total_0(k,j,i), 1 ) ) &
[4346]	2239	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 15 )
[2232]	2240	!
	2241	!-- Downward facing wall on v grid
[4648]	2242	IF ( BTEST( wall_flags_total_0(k-1,j,i), 2 ) .AND. &
	2243	.NOT. BTEST( wall_flags_total_0(k,j,i), 2 ) ) &
[4346]	2244	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 17 )
[2232]	2245	!
	2246	!-- Downward facing wall on w grid
[4648]	2247	IF ( BTEST( wall_flags_total_0(k-1,j,i), 3 ) .AND. &
	2248	.NOT. BTEST( wall_flags_total_0(k,j,i), 3 ) ) &
[4346]	2249	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 19 )
[2232]	2250	ENDDO
	2251	!
	2252	!-- Flags indicating upward facing walls
	2253	DO k = nzb, nzt
	2254	!
	2255	!-- Upward facing wall on scalar grid
[4648]	2256	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2257	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2258	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 12 )
[2232]	2259	!
	2260	!-- Upward facing wall on u grid
[4648]	2261	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 1 ) .AND. &
	2262	BTEST( wall_flags_total_0(k+1,j,i), 1 ) ) &
[4346]	2263	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 14 )
[1]	2264
[4648]	2265	!
[2232]	2266	!-- Upward facing wall on v grid
[4648]	2267	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 2 ) .AND. &
	2268	BTEST( wall_flags_total_0(k+1,j,i), 2 ) ) &
[4346]	2269	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 16 )
[4648]	2270
[2232]	2271	!
	2272	!-- Upward facing wall on w grid
[4648]	2273	IF ( .NOT. BTEST( wall_flags_total_0(k,j,i), 3 ) .AND. &
	2274	BTEST( wall_flags_total_0(k+1,j,i), 3 ) ) &
[4346]	2275	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 18 )
[2232]	2276	!
	2277	!-- Special flag on scalar grid, former nzb_s_inner
[4648]	2278	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .OR. &
	2279	BTEST( wall_flags_total_0(k,j,i), 12 ) .OR. &
	2280	BTEST( wall_flags_total_0(k,j,i), 13 ) ) &
[4346]	2281	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 22 )
[2232]	2282	!
[4648]	2283	!-- Special flag on scalar grid, nzb_diff_s_inner - 1, required for
[2232]	2284	!-- flow_statistics
	2285	IF ( constant_flux_layer .OR. use_surface_fluxes ) THEN
[4648]	2286	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. &
	2287	BTEST( wall_flags_total_0(k+1,j,i), 0 ) ) &
[4346]	2288	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 23 )
[2232]	2289	ELSE
[4648]	2290	IF ( BTEST( wall_flags_total_0(k,j,i), 22 ) ) &
[4346]	2291	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 23 )
[1]	2292	ENDIF
	2293
[4648]	2294
[2232]	2295	ENDDO
[4346]	2296	wall_flags_total_0(nzt+1,j,i) = IBSET( wall_flags_total_0(nzt+1,j,i), 22 )
	2297	wall_flags_total_0(nzt+1,j,i) = IBSET( wall_flags_total_0(nzt+1,j,i), 23 )
[4109]	2298	!
[4648]	2299	!-- Set flags indicating that topography is close by in horizontal direction, i.e. flags that
	2300	!-- infold the topography. These will be used to set advection flags for passive scalars,
	2301	!-- where due to large gradients near buildings stationary numerical oscillations can produce
	2302	!-- unrealistically high concentrations. This is only necessary if WS-scheme is applied for
	2303	!-- scalar advection. Note, these flags will be only used for passive scalars such as chemical
	2304	!-- species or aerosols.
[4109]	2305	IF ( scalar_advec == 'ws-scheme' ) THEN
	2306	DO k = nzb, nzt
[4648]	2307	IF ( BTEST( wall_flags_total_0(k,j,i), 0 ) .AND. ( &
	2308	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-1), 0 ) ) .OR. &
	2309	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-2), 0 ) ) .OR. &
	2310	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i-3), 0 ) ) .OR. &
	2311	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+1), 0 ) ) .OR. &
	2312	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+2), 0 ) ) .OR. &
	2313	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3:j+3,i+3), 0 ) ) .OR. &
	2314	ANY( .NOT. BTEST( wall_flags_total_0(k,j-1,i-3:i+3), 0 ) ) .OR. &
	2315	ANY( .NOT. BTEST( wall_flags_total_0(k,j-2,i-3:i+3), 0 ) ) .OR. &
	2316	ANY( .NOT. BTEST( wall_flags_total_0(k,j-3,i-3:i+3), 0 ) ) .OR. &
	2317	ANY( .NOT. BTEST( wall_flags_total_0(k,j+1,i-3:i+3), 0 ) ) .OR. &
	2318	ANY( .NOT. BTEST( wall_flags_total_0(k,j+2,i-3:i+3), 0 ) ) .OR. &
	2319	ANY( .NOT. BTEST( wall_flags_total_0(k,j+3,i-3:i+3), 0 ) ) &
	2320	) &
	2321	) &
[4346]	2322	wall_flags_total_0(k,j,i) = IBSET( wall_flags_total_0(k,j,i), 31 )
[4109]	2323	ENDDO
	2324	ENDIF
[2232]	2325	ENDDO
	2326	ENDDO
	2327	!
[2696]	2328	!-- Finally, set identification flags indicating natural terrain or buildings.
[4648]	2329	!-- Natural terrain grid points. Information on the type of the surface is stored in bit 1 of
	2330	!-- 3D Integer array topo. However, this bit is only set when topography is read from file. In order
	2331	!-- to run the land-surface model also without topography information, set bit 1 explicitely in this
	2332	!-- case.
	2333	!--
[4294]	2334	!-- Natural terrain grid points
	2335	!-- If no topography is initialized, the land-surface is at k = nzb.
	2336	IF ( TRIM( topography ) /= 'read_from_file' ) THEN
[4329]	2337	wall_flags_static_0(nzb,:,:) = IBSET( wall_flags_static_0(nzb,:,:), 5 )
[4294]	2338	ELSE
	2339	DO i = nxl, nxr
	2340	DO j = nys, nyn
	2341	DO k = nzb, nzt+1
[4648]	2342	!
[4294]	2343	!-- Natural terrain grid point
[4648]	2344	IF ( BTEST( topo(k,j,i), 1 ) ) &
[4329]	2345	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 5 )
[2696]	2346	ENDDO
	2347	ENDDO
[4294]	2348	ENDDO
[2696]	2349	ENDIF
	2350	!
	2351	!-- Building grid points.
[4294]	2352	DO i = nxl, nxr
	2353	DO j = nys, nyn
	2354	DO k = nzb, nzt+1
[4648]	2355	IF ( BTEST( topo(k,j,i), 2 ) ) &
[4329]	2356	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 6 )
[2696]	2357	ENDDO
	2358	ENDDO
[4294]	2359	ENDDO
[2696]	2360	!
[4314]	2361	!-- Set flag 4, indicating new topography grid points due to filtering.
	2362	DO i = nxl, nxr
	2363	DO j = nys, nyn
	2364	DO k = nzb, nzt+1
[4648]	2365	IF ( BTEST( topo(k,j,i), 4 ) ) &
[4329]	2366	wall_flags_static_0(k,j,i) = IBSET( wall_flags_static_0(k,j,i), 4 )
[4314]	2367	ENDDO
	2368	ENDDO
	2369	ENDDO
[4648]	2370
[4346]	2371	CALL exchange_horiz_int( wall_flags_static_0, nys, nyn, nxl, nxr, nzt, nbgp )
[4648]	2372
[4346]	2373	DO i = nxl, nxr
	2374	DO j = nys, nyn
	2375	DO k = nzb, nzt+1
	2376	wall_flags_total_0(k,j,i) = IOR( wall_flags_total_0(k,j,i), wall_flags_static_0(k,j,i) )
	2377	ENDDO
	2378	ENDDO
	2379	ENDDO
[4314]	2380	!
[2232]	2381	!-- Exchange ghost points for wall flags
[4346]	2382	CALL exchange_horiz_int( wall_flags_total_0, nys, nyn, nxl, nxr, nzt, nbgp )
[2232]	2383	!
[4648]	2384	!-- Set boundary conditions also for flags. Can be interpreted as Neumann boundary conditions for
	2385	!-- topography.
[2232]	2386	IF ( .NOT. bc_ns_cyc ) THEN
[2696]	2387	IF ( nys == 0 ) THEN
[4648]	2388	DO i = 1, nbgp
[4346]	2389	wall_flags_total_0(:,nys-i,:) = wall_flags_total_0(:,nys,:)
[2696]	2390	ENDDO
	2391	ENDIF
	2392	IF ( nyn == ny ) THEN
[4648]	2393	DO i = 1, nbgp
[4346]	2394	wall_flags_total_0(:,nyn+i,:) = wall_flags_total_0(:,nyn,:)
[2696]	2395	ENDDO
	2396	ENDIF
[2232]	2397	ENDIF
	2398	IF ( .NOT. bc_lr_cyc ) THEN
[2696]	2399	IF ( nxl == 0 ) THEN
[4648]	2400	DO i = 1, nbgp
[4346]	2401	wall_flags_total_0(:,:,nxl-i) = wall_flags_total_0(:,:,nxl)
[2696]	2402	ENDDO
[2232]	2403	ENDIF
[4648]	2404	IF ( nxr == nx ) THEN
	2405	DO i = 1, nbgp
	2406	wall_flags_total_0(:,:,nxr+i) = wall_flags_total_0(:,:,nxr)
[2232]	2407	ENDDO
[4648]	2408	ENDIF
[2232]	2409	ENDIF
[4168]	2410	!
[4648]	2411	!-- Pre-calculate topography top indices (former get_topography_top_index
[4168]	2412	!-- function)
[4653]	2413	ALLOCATE( topo_top_ind(nysg:nyng,nxlg:nxrg,0:5) )
[4168]	2414	!
	2415	!-- Uppermost topography index on scalar grid
	2416	ibit = 12
[4648]	2417	topo_top_ind(:,:,0) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2418	- 1
[4168]	2419	!
[4648]	2420	!-- Uppermost topography index on u grid
[4168]	2421	ibit = 14
[4648]	2422	topo_top_ind(:,:,1) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2423	- 1
[4168]	2424	!
[4648]	2425	!-- Uppermost topography index on v grid
[4168]	2426	ibit = 16
[4648]	2427	topo_top_ind(:,:,2) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2428	- 1
[4168]	2429	!
	2430	!-- Uppermost topography index on w grid
	2431	ibit = 18
[4648]	2432	topo_top_ind(:,:,3) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2433	- 1
[4168]	2434	!
	2435	!-- Uppermost topography index on scalar outer grid
	2436	ibit = 24
[4648]	2437	topo_top_ind(:,:,4) = MAXLOC( MERGE( 1, 0, BTEST( wall_flags_total_0(:,:,:), ibit ) ), DIM=1 ) &
	2438	- 1
[4653]	2439	!
	2440	!-- Uppermost topography index including full-3D geometry
	2441	ibit = 12
	2442	DO k = nzb, nzt+1
	2443	WHERE( BTEST( wall_flags_total_0(k,:,:), ibit ) ) topo_top_ind(:,:,5) = k
	2444	ENDDO
[4414]	2445
[2696]	2446	END SUBROUTINE set_topo_flags

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |