Home

Context Navigation

source: palm/trunk/SOURCE/init_3d_model.f90 @ 692

Last change on this file since 692 was 681, checked in by gryschka, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 55.2 KB

Rev	Line
[1]	1	#if defined( __ibmy_special )
	2	@PROCESS NOOPTimize
	3	#endif
	4	SUBROUTINE init_3d_model
	5
	6	!------------------------------------------------------------------------------!
[254]	7	! Current revisions:
[1]	8	! -----------------
[674]	9	!
[680]	10	!
[668]	11	! Former revisions:
	12	! -----------------
[681]	13	! 680 2011-02-04 23:16:06Z gryschka $
	14	! bugfix: volume_flow_control
[668]	15	!
[674]	16	! 673 2011-01-18 16:19:48Z suehring
	17	! weight_substep (moved from advec_ws) and weight_pres added.
	18	! Allocate p_sub when using Multigrid or SOR solver.
	19	! Call of ws_init moved behind the if requests.
	20	!
[668]	21	! 667 2010-12-23 12:06:00Z suehring/gryschka
[667]	22	! nxl-1, nxr+1, nys-1, nyn+1 replaced by nxlg, nxrg, nysg, nyng in loops and
	23	! allocation of arrays. Calls of exchange_horiz are modified.
	24	! Call ws_init to initialize arrays needed for statistical evaluation and
	25	! optimization when ws-scheme is used.
	26	! Initial volume flow is now calculated by using the variable hom_sum.
	27	! Therefore the correction of initial volume flow for non-flat topography
	28	! removed (removed u_nzb_p1_for_vfc and v_nzb_p1_for_vfc)
	29	! Changed surface boundary conditions for u and v in case of ibc_uv_b == 0 from
	30	! mirror bc to dirichlet boundary conditions (u=v=0), so that k=nzb is
	31	! representative for the height z0
	32	! Bugfix: type conversion of '1' to 64bit for the MAX function (ngp_3d_inner)
	33	!
[623]	34	! 622 2010-12-10 08:08:13Z raasch
	35	! optional barriers included in order to speed up collective operations
	36	!
[561]	37	! 560 2010-09-09 10:06:09Z weinreis
	38	! bugfix: correction of calculating ngp_3d for 64 bit
	39	!
[486]	40	! 485 2010-02-05 10:57:51Z raasch
	41	! calculation of ngp_3d + ngp_3d_inner changed because they have now 64 bit
	42	!
[482]	43	! 407 2009-12-01 15:01:15Z maronga
	44	! var_ts is replaced by dots_max
	45	! Enabled passive scalar/humidity wall fluxes for non-flat topography
	46	!
[392]	47	! 388 2009-09-23 09:40:33Z raasch
[388]	48	! Initialization of prho added.
[359]	49	! bugfix: correction of initial volume flow for non-flat topography
	50	! bugfix: zero initialization of arrays within buildings for 'cyclic_fill'
[333]	51	! bugfix: avoid that ngp_2dh_s_inner becomes zero
[328]	52	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill', now
	53	! independent of turbulent_inflow
[254]	54	! Output of messages replaced by message handling routine.
[240]	55	! Set the starting level and the vertical smoothing factor used for
	56	! the external pressure gradient
[254]	57	! +conserve_volume_flow_mode: 'default', 'initial_profiles', 'inflow_profile'
[241]	58	! and 'bulk_velocity'
[292]	59	! If the inversion height calculated by the prerun is zero,
	60	! inflow_damping_height must be explicitly specified.
[139]	61	!
[198]	62	! 181 2008-07-30 07:07:47Z raasch
	63	! bugfix: zero assignments to tendency arrays in case of restarts,
	64	! further extensions and modifications in the initialisation of the plant
	65	! canopy model,
	66	! allocation of hom_sum moved to parin, initialization of spectrum_x\|y directly
	67	! after allocating theses arrays,
	68	! read data for recycling added as new initialization option,
	69	! dummy allocation for diss
	70	!
[139]	71	! 138 2007-11-28 10:03:58Z letzel
[132]	72	! New counter ngp_2dh_s_inner.
	73	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	74	! Corrected calculation of initial volume flow for 'set_1d-model_profiles' and
	75	! 'set_constant_profiles' in case of buildings in the reference cross-sections.
[77]	76	!
[110]	77	! 108 2007-08-24 15:10:38Z letzel
	78	! Flux initialization in case of coupled runs, +momentum fluxes at top boundary,
	79	! +arrays for phase speed c_u, c_v, c_w, indices for u\|v\|w_m_l\|r changed
	80	! +qswst_remote in case of atmosphere model with humidity coupled to ocean
	81	! Rayleigh damping for ocean, optionally calculate km and kh from initial
	82	! TKE e_init
	83	!
[98]	84	! 97 2007-06-21 08:23:15Z raasch
	85	! Initialization of salinity, call of init_ocean
	86	!
[90]	87	! 87 2007-05-22 15:46:47Z raasch
	88	! var_hom and var_sum renamed pr_palm
	89	!
[77]	90	! 75 2007-03-22 09:54:05Z raasch
[73]	91	! Arrays for radiation boundary conditions are allocated (u_m_l, u_m_r, etc.),
	92	! bugfix for cases with the outflow damping layer extending over more than one
[75]	93	! subdomain, moisture renamed humidity,
	94	! new initializing action "by_user" calls user_init_3d_model,
[72]	95	! precipitation_amount/rate, ts_value are allocated, +module netcdf_control,
[51]	96	! initial velocities at nzb+1 are regarded for volume
	97	! flow control in case they have been set zero before (to avoid small timesteps)
[75]	98	! -uvmean_outflow, uxrp, vynp eliminated
[1]	99	!
[39]	100	! 19 2007-02-23 04:53:48Z raasch
	101	! +handling of top fluxes
	102	!
[3]	103	! RCS Log replace by Id keyword, revision history cleaned up
	104	!
[1]	105	! Revision 1.49 2006/08/22 15:59:07 raasch
	106	! No optimization of this file on the ibmy (Yonsei Univ.)
	107	!
	108	! Revision 1.1 1998/03/09 16:22:22 raasch
	109	! Initial revision
	110	!
	111	!
	112	! Description:
	113	! ------------
	114	! Allocation of arrays and initialization of the 3D model via
	115	! a) pre-run the 1D model
	116	! or
	117	! b) pre-set constant linear profiles
	118	! or
	119	! c) read values of a previous run
	120	!------------------------------------------------------------------------------!
	121
[667]	122	USE advec_ws
[1]	123	USE arrays_3d
	124	USE averaging
[72]	125	USE cloud_parameters
[1]	126	USE constants
	127	USE control_parameters
	128	USE cpulog
	129	USE indices
	130	USE interfaces
	131	USE model_1d
[51]	132	USE netcdf_control
[1]	133	USE particle_attributes
	134	USE pegrid
	135	USE profil_parameter
	136	USE random_function_mod
	137	USE statistics
	138
	139	IMPLICIT NONE
	140
[559]	141	INTEGER :: i, ind_array(1), j, k, sr
[1]	142
[485]	143	INTEGER, DIMENSION(:), ALLOCATABLE :: ngp_2dh_l
[1]	144
[132]	145	INTEGER, DIMENSION(:,:), ALLOCATABLE :: ngp_2dh_outer_l, &
	146	ngp_2dh_s_inner_l
[1]	147
[153]	148	REAL :: a, b
	149
[1]	150	REAL, DIMENSION(1:2) :: volume_flow_area_l, volume_flow_initial_l
	151
[485]	152	REAL, DIMENSION(:), ALLOCATABLE :: ngp_3d_inner_l, ngp_3d_inner_tmp
[1]	153
[485]	154
[1]	155	!
	156	!-- Allocate arrays
	157	ALLOCATE( ngp_2dh(0:statistic_regions), ngp_2dh_l(0:statistic_regions), &
	158	ngp_3d(0:statistic_regions), &
	159	ngp_3d_inner(0:statistic_regions), &
	160	ngp_3d_inner_l(0:statistic_regions), &
[485]	161	ngp_3d_inner_tmp(0:statistic_regions), &
[1]	162	sums_divnew_l(0:statistic_regions), &
	163	sums_divold_l(0:statistic_regions) )
[240]	164	ALLOCATE( dp_smooth_factor(nzb:nzt), rdf(nzb+1:nzt) )
[143]	165	ALLOCATE( ngp_2dh_outer(nzb:nzt+1,0:statistic_regions), &
[1]	166	ngp_2dh_outer_l(nzb:nzt+1,0:statistic_regions), &
[132]	167	ngp_2dh_s_inner(nzb:nzt+1,0:statistic_regions), &
	168	ngp_2dh_s_inner_l(nzb:nzt+1,0:statistic_regions), &
[667]	169	rmask(nysg:nyng,nxlg:nxrg,0:statistic_regions), &
[87]	170	sums(nzb:nzt+1,pr_palm+max_pr_user), &
	171	sums_l(nzb:nzt+1,pr_palm+max_pr_user,0:threads_per_task-1), &
[1]	172	sums_l_l(nzb:nzt+1,0:statistic_regions,0:threads_per_task-1), &
	173	sums_up_fraction_l(10,3,0:statistic_regions), &
[48]	174	sums_wsts_bc_l(nzb:nzt+1,0:statistic_regions), &
[394]	175	ts_value(dots_max,0:statistic_regions) )
[667]	176	ALLOCATE( km_damp_x(nxlg:nxrg), km_damp_y(nysg:nyng) )
[1]	177
[667]	178	ALLOCATE( rif_1(nysg:nyng,nxlg:nxrg), shf_1(nysg:nyng,nxlg:nxrg), &
	179	ts(nysg:nyng,nxlg:nxrg), tswst_1(nysg:nyng,nxlg:nxrg), &
	180	us(nysg:nyng,nxlg:nxrg), usws_1(nysg:nyng,nxlg:nxrg), &
	181	uswst_1(nysg:nyng,nxlg:nxrg), &
	182	vsws_1(nysg:nyng,nxlg:nxrg), &
	183	vswst_1(nysg:nyng,nxlg:nxrg), z0(nysg:nyng,nxlg:nxrg) )
[1]	184
	185	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
	186	!
	187	!-- Leapfrog scheme needs two timelevels of diffusion quantities
[667]	188	ALLOCATE( rif_2(nysg:nyng,nxlg:nxrg), &
	189	shf_2(nysg:nyng,nxlg:nxrg), &
	190	tswst_2(nysg:nyng,nxlg:nxrg), &
	191	usws_2(nysg:nyng,nxlg:nxrg), &
	192	uswst_2(nysg:nyng,nxlg:nxrg), &
	193	vswst_2(nysg:nyng,nxlg:nxrg), &
	194	vsws_2(nysg:nyng,nxlg:nxrg) )
[1]	195	ENDIF
	196
[75]	197	ALLOCATE( d(nzb+1:nzta,nys:nyna,nxl:nxra), &
[667]	198	e_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	199	e_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	200	e_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	201	kh_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	202	km_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	203	p(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	204	pt_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	205	pt_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	206	pt_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	207	tend(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	208	u_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	209	u_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	210	u_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	211	v_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	212	v_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	213	v_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	214	w_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	215	w_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	216	w_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[673]	217	!
	218	!-- Following array is required to buffer the perturbation pressure during
	219	!-- Runge-Kutta 3rd order time integration.
	220	IF ( psolver == 'multigrid' .OR. psolver == 'sor' ) THEN
	221	ALLOCATE( p_sub(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
	222	ENDIF
[1]	223
	224	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
[667]	225	ALLOCATE( kh_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	226	km_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	227	ENDIF
	228
[75]	229	IF ( humidity .OR. passive_scalar ) THEN
[1]	230	!
[75]	231	!-- 2D-humidity/scalar arrays
[667]	232	ALLOCATE ( qs(nysg:nyng,nxlg:nxrg), &
	233	qsws_1(nysg:nyng,nxlg:nxrg), &
	234	qswst_1(nysg:nyng,nxlg:nxrg) )
[1]	235
	236	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
[667]	237	ALLOCATE( qsws_2(nysg:nyng,nxlg:nxrg), &
	238	qswst_2(nysg:nyng,nxlg:nxrg) )
[1]	239	ENDIF
	240	!
[75]	241	!-- 3D-humidity/scalar arrays
[667]	242	ALLOCATE( q_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	243	q_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	244	q_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	245
	246	!
[75]	247	!-- 3D-arrays needed for humidity only
	248	IF ( humidity ) THEN
[667]	249	ALLOCATE( vpt_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	250
	251	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
[667]	252	ALLOCATE( vpt_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	253	ENDIF
	254
	255	IF ( cloud_physics ) THEN
	256	!
	257	!-- Liquid water content
[667]	258	ALLOCATE ( ql_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[72]	259	!
	260	!-- Precipitation amount and rate (only needed if output is switched)
[667]	261	ALLOCATE( precipitation_amount(nysg:nyng,nxlg:nxrg), &
	262	precipitation_rate(nysg:nyng,nxlg:nxrg) )
[1]	263	ENDIF
	264
	265	IF ( cloud_droplets ) THEN
	266	!
	267	!-- Liquid water content, change in liquid water content,
	268	!-- real volume of particles (with weighting), volume of particles
[667]	269	ALLOCATE ( ql_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	270	ql_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	271	ql_v(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	272	ql_vp(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[1]	273	ENDIF
	274
	275	ENDIF
	276
	277	ENDIF
	278
[94]	279	IF ( ocean ) THEN
[667]	280	ALLOCATE( saswsb_1(nysg:nyng,nxlg:nxrg), &
	281	saswst_1(nysg:nyng,nxlg:nxrg) )
	282	ALLOCATE( prho_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	283	rho_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	284	sa_1(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	285	sa_2(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	286	sa_3(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[388]	287	prho => prho_1
	288	rho => rho_1 ! routines calc_mean_profile and diffusion_e require
	289	! density to be apointer
[108]	290	IF ( humidity_remote ) THEN
[667]	291	ALLOCATE( qswst_remote(nysg:nyng,nxlg:nxrg))
[108]	292	qswst_remote = 0.0
	293	ENDIF
[94]	294	ENDIF
	295
[1]	296	!
	297	!-- 3D-array for storing the dissipation, needed for calculating the sgs
	298	!-- particle velocities
	299	IF ( use_sgs_for_particles ) THEN
[667]	300	ALLOCATE ( diss(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[181]	301	ELSE
	302	ALLOCATE ( diss(2,2,2) ) ! required because diss is used as a
	303	! formal parameter
[1]	304	ENDIF
	305
	306	IF ( dt_dosp /= 9999999.9 ) THEN
	307	ALLOCATE( spectrum_x( 1:nx/2, 1:10, 1:10 ), &
	308	spectrum_y( 1:ny/2, 1:10, 1:10 ) )
[146]	309	spectrum_x = 0.0
	310	spectrum_y = 0.0
[1]	311	ENDIF
	312
	313	!
[138]	314	!-- 3D-arrays for the leaf area density and the canopy drag coefficient
	315	IF ( plant_canopy ) THEN
[667]	316	ALLOCATE ( lad_s(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	317	lad_u(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	318	lad_v(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	319	lad_w(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	320	cdc(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[153]	321
	322	IF ( passive_scalar ) THEN
[667]	323	ALLOCATE ( sls(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	324	sec(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[153]	325	ENDIF
	326
	327	IF ( cthf /= 0.0 ) THEN
[667]	328	ALLOCATE ( lai(nzb:nzt+1,nysg:nyng,nxlg:nxrg), &
	329	canopy_heat_flux(nzb:nzt+1,nysg:nyng,nxlg:nxrg) )
[153]	330	ENDIF
	331
[138]	332	ENDIF
	333
	334	!
[51]	335	!-- 4D-array for storing the Rif-values at vertical walls
	336	IF ( topography /= 'flat' ) THEN
[667]	337	ALLOCATE( rif_wall(nzb:nzt+1,nysg:nyng,nxlg:nxrg,1:4) )
[51]	338	rif_wall = 0.0
	339	ENDIF
	340
	341	!
[106]	342	!-- Arrays to store velocity data from t-dt and the phase speeds which
	343	!-- are needed for radiation boundary conditions
[73]	344	IF ( outflow_l ) THEN
[667]	345	ALLOCATE( u_m_l(nzb:nzt+1,nysg:nyng,1:2), &
	346	v_m_l(nzb:nzt+1,nysg:nyng,0:1), &
	347	w_m_l(nzb:nzt+1,nysg:nyng,0:1) )
[73]	348	ENDIF
	349	IF ( outflow_r ) THEN
[667]	350	ALLOCATE( u_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx), &
	351	v_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx), &
	352	w_m_r(nzb:nzt+1,nysg:nyng,nx-1:nx) )
[73]	353	ENDIF
[106]	354	IF ( outflow_l .OR. outflow_r ) THEN
[667]	355	ALLOCATE( c_u(nzb:nzt+1,nysg:nyng), c_v(nzb:nzt+1,nysg:nyng), &
	356	c_w(nzb:nzt+1,nysg:nyng) )
[106]	357	ENDIF
[73]	358	IF ( outflow_s ) THEN
[667]	359	ALLOCATE( u_m_s(nzb:nzt+1,0:1,nxlg:nxrg), &
	360	v_m_s(nzb:nzt+1,1:2,nxlg:nxrg), &
	361	w_m_s(nzb:nzt+1,0:1,nxlg:nxrg) )
[73]	362	ENDIF
	363	IF ( outflow_n ) THEN
[667]	364	ALLOCATE( u_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg), &
	365	v_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg), &
	366	w_m_n(nzb:nzt+1,ny-1:ny,nxlg:nxrg) )
[73]	367	ENDIF
[106]	368	IF ( outflow_s .OR. outflow_n ) THEN
[667]	369	ALLOCATE( c_u(nzb:nzt+1,nxlg:nxrg), c_v(nzb:nzt+1,nxlg:nxrg), &
	370	c_w(nzb:nzt+1,nxlg:nxrg) )
[106]	371	ENDIF
[73]	372
	373	!
[1]	374	!-- Initial assignment of the pointers
	375	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
	376
[19]	377	rif_m => rif_1; rif => rif_2
	378	shf_m => shf_1; shf => shf_2
	379	tswst_m => tswst_1; tswst => tswst_2
	380	usws_m => usws_1; usws => usws_2
[102]	381	uswst_m => uswst_1; uswst => uswst_2
[19]	382	vsws_m => vsws_1; vsws => vsws_2
[102]	383	vswst_m => vswst_1; vswst => vswst_2
[1]	384	e_m => e_1; e => e_2; e_p => e_3; te_m => e_3
	385	kh_m => kh_1; kh => kh_2
	386	km_m => km_1; km => km_2
	387	pt_m => pt_1; pt => pt_2; pt_p => pt_3; tpt_m => pt_3
	388	u_m => u_1; u => u_2; u_p => u_3; tu_m => u_3
	389	v_m => v_1; v => v_2; v_p => v_3; tv_m => v_3
	390	w_m => w_1; w => w_2; w_p => w_3; tw_m => w_3
	391
[75]	392	IF ( humidity .OR. passive_scalar ) THEN
[19]	393	qsws_m => qsws_1; qsws => qsws_2
	394	qswst_m => qswst_1; qswst => qswst_2
[1]	395	q_m => q_1; q => q_2; q_p => q_3; tq_m => q_3
[75]	396	IF ( humidity ) vpt_m => vpt_1; vpt => vpt_2
[1]	397	IF ( cloud_physics ) ql => ql_1
	398	IF ( cloud_droplets ) THEN
	399	ql => ql_1
	400	ql_c => ql_2
	401	ENDIF
	402	ENDIF
	403
	404	ELSE
	405
[19]	406	rif => rif_1
	407	shf => shf_1
	408	tswst => tswst_1
	409	usws => usws_1
[102]	410	uswst => uswst_1
[19]	411	vsws => vsws_1
[102]	412	vswst => vswst_1
[19]	413	e => e_1; e_p => e_2; te_m => e_3; e_m => e_3
	414	kh => kh_1
	415	km => km_1
	416	pt => pt_1; pt_p => pt_2; tpt_m => pt_3; pt_m => pt_3
	417	u => u_1; u_p => u_2; tu_m => u_3; u_m => u_3
	418	v => v_1; v_p => v_2; tv_m => v_3; v_m => v_3
	419	w => w_1; w_p => w_2; tw_m => w_3; w_m => w_3
[1]	420
[75]	421	IF ( humidity .OR. passive_scalar ) THEN
[1]	422	qsws => qsws_1
[19]	423	qswst => qswst_1
[94]	424	q => q_1; q_p => q_2; tq_m => q_3; q_m => q_3
[75]	425	IF ( humidity ) vpt => vpt_1
[1]	426	IF ( cloud_physics ) ql => ql_1
	427	IF ( cloud_droplets ) THEN
	428	ql => ql_1
	429	ql_c => ql_2
	430	ENDIF
	431	ENDIF
	432
[94]	433	IF ( ocean ) THEN
[95]	434	saswsb => saswsb_1
[94]	435	saswst => saswst_1
	436	sa => sa_1; sa_p => sa_2; tsa_m => sa_3
	437	ENDIF
	438
[1]	439	ENDIF
[673]	440
[1]	441	!
[673]	442	!-- Allocate arrays containing the RK coefficient for right evaluation of
	443	!-- perturbation pressure and turbulent fluxes. At this point it is needed
	444	!-- for right pressure correction during initialization. Further below
	445	!-- the real values will be set.
	446	ALLOCATE (weight_substep(1:intermediate_timestep_count_max), &
	447	weight_pres(1:intermediate_timestep_count_max) )
	448	weight_substep = 1.
	449	weight_pres = 1.
	450	intermediate_timestep_count = 1 ! needed for simulated_time=0
	451
	452	!
[1]	453	!-- Initialize model variables
[147]	454	IF ( TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
[328]	455	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
[1]	456	!
	457	!-- First model run of a possible job queue.
	458	!-- Initial profiles of the variables must be computes.
	459	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	460	!
	461	!-- Use solutions of the 1D model as initial profiles,
	462	!-- start 1D model
	463	CALL init_1d_model
	464	!
	465	!-- Transfer initial profiles to the arrays of the 3D model
[667]	466	DO i = nxlg, nxrg
	467	DO j = nysg, nyng
[1]	468	e(:,j,i) = e1d
	469	kh(:,j,i) = kh1d
	470	km(:,j,i) = km1d
	471	pt(:,j,i) = pt_init
	472	u(:,j,i) = u1d
	473	v(:,j,i) = v1d
	474	ENDDO
	475	ENDDO
	476
[75]	477	IF ( humidity .OR. passive_scalar ) THEN
[667]	478	DO i = nxlg, nxrg
	479	DO j = nysg, nyng
[1]	480	q(:,j,i) = q_init
	481	ENDDO
	482	ENDDO
	483	ENDIF
	484
	485	IF ( .NOT. constant_diffusion ) THEN
[667]	486	DO i = nxlg, nxrg
	487	DO j = nysg, nyng
[1]	488	e(:,j,i) = e1d
	489	ENDDO
	490	ENDDO
	491	!
	492	!-- Store initial profiles for output purposes etc.
	493	hom(:,1,25,:) = SPREAD( l1d, 2, statistic_regions+1 )
	494
	495	IF ( prandtl_layer ) THEN
	496	rif = rif1d(nzb+1)
	497	ts = 0.0 ! could actually be computed more accurately in the
	498	! 1D model. Update when opportunity arises.
	499	us = us1d
	500	usws = usws1d
	501	vsws = vsws1d
	502	ELSE
	503	ts = 0.0 ! must be set, because used in
	504	rif = 0.0 ! flowste
	505	us = 0.0
	506	usws = 0.0
	507	vsws = 0.0
	508	ENDIF
	509
	510	ELSE
	511	e = 0.0 ! must be set, because used in
	512	rif = 0.0 ! flowste
	513	ts = 0.0
	514	us = 0.0
	515	usws = 0.0
	516	vsws = 0.0
	517	ENDIF
[102]	518	uswst = top_momentumflux_u
	519	vswst = top_momentumflux_v
[1]	520
	521	!
	522	!-- In every case qs = 0.0 (see also pt)
	523	!-- This could actually be computed more accurately in the 1D model.
	524	!-- Update when opportunity arises!
[75]	525	IF ( humidity .OR. passive_scalar ) qs = 0.0
[1]	526
	527	!
	528	!-- inside buildings set velocities back to zero
	529	IF ( topography /= 'flat' ) THEN
	530	DO i = nxl-1, nxr+1
	531	DO j = nys-1, nyn+1
	532	u(nzb:nzb_u_inner(j,i),j,i) = 0.0
	533	v(nzb:nzb_v_inner(j,i),j,i) = 0.0
	534	ENDDO
	535	ENDDO
[667]	536
[1]	537	!
	538	!-- WARNING: The extra boundary conditions set after running the
	539	!-- ------- 1D model impose an error on the divergence one layer
	540	!-- below the topography; need to correct later
	541	!-- ATTENTION: Provisional correction for Piacsek & Williams
	542	!-- --------- advection scheme: keep u and v zero one layer below
	543	!-- the topography.
	544	!
[667]	545	!-- Following was removed, because mirror boundary condition are
	546	!-- replaced by dirichlet boundary conditions
[1]	547	!
[667]	548	! IF ( ibc_uv_b == 0 ) THEN
	549	!!
	550	!!-- Satisfying the Dirichlet condition with an extra layer below
	551	!!-- the surface where the u and v component change their sign.
	552	! DO i = nxl-1, nxr+1
	553	! DO j = nys-1, nyn+1
	554	! IF ( nzb_u_inner(j,i) == 0 ) u(0,j,i) = -u(1,j,i)
	555	! IF ( nzb_v_inner(j,i) == 0 ) v(0,j,i) = -v(1,j,i)
	556	! ENDDO
	557	! ENDDO
	558	!
	559	! ELSE
	560	IF ( ibc_uv_b == 1 ) THEN
	561	!
[1]	562	!-- Neumann condition
	563	DO i = nxl-1, nxr+1
	564	DO j = nys-1, nyn+1
	565	IF ( nzb_u_inner(j,i) == 0 ) u(0,j,i) = u(1,j,i)
	566	IF ( nzb_v_inner(j,i) == 0 ) v(0,j,i) = v(1,j,i)
	567	ENDDO
	568	ENDDO
	569
	570	ENDIF
	571
	572	ENDIF
	573
	574	ELSEIF ( INDEX(initializing_actions, 'set_constant_profiles') /= 0 ) &
	575	THEN
	576	!
	577	!-- Use constructed initial profiles (velocity constant with height,
	578	!-- temperature profile with constant gradient)
[667]	579	DO i = nxlg, nxrg
	580	DO j = nysg, nyng
[1]	581	pt(:,j,i) = pt_init
	582	u(:,j,i) = u_init
	583	v(:,j,i) = v_init
	584	ENDDO
	585	ENDDO
[75]	586
[1]	587	!
[292]	588	!-- Set initial horizontal velocities at the lowest computational grid
	589	!-- levels to zero in order to avoid too small time steps caused by the
	590	!-- diffusion limit in the initial phase of a run (at k=1, dz/2 occurs
	591	!-- in the limiting formula!). The original values are stored to be later
	592	!-- used for volume flow control.
[667]	593	DO i = nxlg, nxrg
	594	DO j = nysg, nyng
[1]	595	u(nzb:nzb_u_inner(j,i)+1,j,i) = 0.0
	596	v(nzb:nzb_v_inner(j,i)+1,j,i) = 0.0
	597	ENDDO
	598	ENDDO
	599
[75]	600	IF ( humidity .OR. passive_scalar ) THEN
[667]	601	DO i = nxlg, nxrg
	602	DO j = nysg, nyng
[1]	603	q(:,j,i) = q_init
	604	ENDDO
	605	ENDDO
	606	ENDIF
	607
[94]	608	IF ( ocean ) THEN
[667]	609	DO i = nxlg, nxrg
	610	DO j = nysg, nyng
[94]	611	sa(:,j,i) = sa_init
	612	ENDDO
	613	ENDDO
	614	ENDIF
[1]	615
	616	IF ( constant_diffusion ) THEN
	617	km = km_constant
	618	kh = km / prandtl_number
[108]	619	e = 0.0
	620	ELSEIF ( e_init > 0.0 ) THEN
	621	DO k = nzb+1, nzt
	622	km(k,:,:) = 0.1 * l_grid(k) * SQRT( e_init )
	623	ENDDO
	624	km(nzb,:,:) = km(nzb+1,:,:)
	625	km(nzt+1,:,:) = km(nzt,:,:)
	626	kh = km / prandtl_number
	627	e = e_init
[1]	628	ELSE
[108]	629	IF ( .NOT. ocean ) THEN
	630	kh = 0.01 ! there must exist an initial diffusion, because
	631	km = 0.01 ! otherwise no TKE would be produced by the
	632	! production terms, as long as not yet
	633	! e = (u/cm)*2 at k=nzb+1
	634	ELSE
	635	kh = 0.00001
	636	km = 0.00001
	637	ENDIF
	638	e = 0.0
[1]	639	ENDIF
[102]	640	rif = 0.0
	641	ts = 0.0
	642	us = 0.0
	643	usws = 0.0
	644	uswst = top_momentumflux_u
	645	vsws = 0.0
	646	vswst = top_momentumflux_v
[75]	647	IF ( humidity .OR. passive_scalar ) qs = 0.0
[1]	648
	649	!
	650	!-- Compute initial temperature field and other constants used in case
	651	!-- of a sloping surface
	652	IF ( sloping_surface ) CALL init_slope
	653
[46]	654	ELSEIF ( INDEX(initializing_actions, 'by_user') /= 0 ) &
	655	THEN
	656	!
	657	!-- Initialization will completely be done by the user
	658	CALL user_init_3d_model
	659
[1]	660	ENDIF
[667]	661	!
	662	!-- Bottom boundary
	663	IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2 ) THEN
	664	u(nzb,:,:) = 0.0
	665	v(nzb,:,:) = 0.0
	666	ENDIF
[1]	667
	668	!
[151]	669	!-- Apply channel flow boundary condition
[132]	670	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	671
	672	u(nzt+1,:,:) = 0.0
	673	v(nzt+1,:,:) = 0.0
	674
[151]	675	!-- For the Dirichlet condition to be correctly applied at the top, set
[132]	676	!-- ug and vg to zero there
	677	ug(nzt+1) = 0.0
	678	vg(nzt+1) = 0.0
	679
	680	ENDIF
	681
	682	!
[1]	683	!-- Calculate virtual potential temperature
[75]	684	IF ( humidity ) vpt = pt * ( 1.0 + 0.61 * q )
[1]	685
	686	!
	687	!-- Store initial profiles for output purposes etc.
	688	hom(:,1,5,:) = SPREAD( u(:,nys,nxl), 2, statistic_regions+1 )
	689	hom(:,1,6,:) = SPREAD( v(:,nys,nxl), 2, statistic_regions+1 )
[667]	690	IF ( ibc_uv_b == 0 .OR. ibc_uv_b == 2) THEN
	691	hom(nzb,1,5,:) = 0.0
	692	hom(nzb,1,6,:) = 0.0
[1]	693	ENDIF
	694	hom(:,1,7,:) = SPREAD( pt(:,nys,nxl), 2, statistic_regions+1 )
	695	hom(:,1,23,:) = SPREAD( km(:,nys,nxl), 2, statistic_regions+1 )
	696	hom(:,1,24,:) = SPREAD( kh(:,nys,nxl), 2, statistic_regions+1 )
	697
[97]	698	IF ( ocean ) THEN
	699	!
	700	!-- Store initial salinity profile
	701	hom(:,1,26,:) = SPREAD( sa(:,nys,nxl), 2, statistic_regions+1 )
	702	ENDIF
[1]	703
[75]	704	IF ( humidity ) THEN
[1]	705	!
	706	!-- Store initial profile of total water content, virtual potential
	707	!-- temperature
	708	hom(:,1,26,:) = SPREAD( q(:,nys,nxl), 2, statistic_regions+1 )
	709	hom(:,1,29,:) = SPREAD( vpt(:,nys,nxl), 2, statistic_regions+1 )
	710	IF ( cloud_physics .OR. cloud_droplets ) THEN
	711	!
	712	!-- Store initial profile of specific humidity and potential
	713	!-- temperature
	714	hom(:,1,27,:) = SPREAD( q(:,nys,nxl), 2, statistic_regions+1 )
	715	hom(:,1,28,:) = SPREAD( pt(:,nys,nxl), 2, statistic_regions+1 )
	716	ENDIF
	717	ENDIF
	718
	719	IF ( passive_scalar ) THEN
	720	!
	721	!-- Store initial scalar profile
	722	hom(:,1,26,:) = SPREAD( q(:,nys,nxl), 2, statistic_regions+1 )
	723	ENDIF
	724
	725	!
[19]	726	!-- Initialize fluxes at bottom surface
[1]	727	IF ( use_surface_fluxes ) THEN
	728
	729	IF ( constant_heatflux ) THEN
	730	!
	731	!-- Heat flux is prescribed
	732	IF ( random_heatflux ) THEN
	733	CALL disturb_heatflux
	734	ELSE
	735	shf = surface_heatflux
	736	!
	737	!-- Over topography surface_heatflux is replaced by wall_heatflux(0)
	738	IF ( TRIM( topography ) /= 'flat' ) THEN
[667]	739	DO i = nxlg, nxrg
	740	DO j = nysg, nyng
[1]	741	IF ( nzb_s_inner(j,i) /= 0 ) THEN
	742	shf(j,i) = wall_heatflux(0)
	743	ENDIF
	744	ENDDO
	745	ENDDO
	746	ENDIF
	747	ENDIF
	748	IF ( ASSOCIATED( shf_m ) ) shf_m = shf
	749	ENDIF
	750
	751	!
	752	!-- Determine the near-surface water flux
[75]	753	IF ( humidity .OR. passive_scalar ) THEN
[1]	754	IF ( constant_waterflux ) THEN
	755	qsws = surface_waterflux
[407]	756	!
	757	!-- Over topography surface_waterflux is replaced by
	758	!-- wall_humidityflux(0)
	759	IF ( TRIM( topography ) /= 'flat' ) THEN
	760	wall_qflux = wall_humidityflux
[667]	761	DO i = nxlg, nxrg
	762	DO j = nysg, nyng
[407]	763	IF ( nzb_s_inner(j,i) /= 0 ) THEN
	764	qsws(j,i) = wall_qflux(0)
	765	ENDIF
	766	ENDDO
	767	ENDDO
	768	ENDIF
[1]	769	IF ( ASSOCIATED( qsws_m ) ) qsws_m = qsws
	770	ENDIF
	771	ENDIF
	772
	773	ENDIF
	774
	775	!
[19]	776	!-- Initialize fluxes at top surface
[94]	777	!-- Currently, only the heatflux and salinity flux can be prescribed.
	778	!-- The latent flux is zero in this case!
[19]	779	IF ( use_top_fluxes ) THEN
	780
	781	IF ( constant_top_heatflux ) THEN
	782	!
	783	!-- Heat flux is prescribed
	784	tswst = top_heatflux
	785	IF ( ASSOCIATED( tswst_m ) ) tswst_m = tswst
	786
[75]	787	IF ( humidity .OR. passive_scalar ) THEN
[19]	788	qswst = 0.0
	789	IF ( ASSOCIATED( qswst_m ) ) qswst_m = qswst
	790	ENDIF
[94]	791
	792	IF ( ocean ) THEN
[95]	793	saswsb = bottom_salinityflux
[94]	794	saswst = top_salinityflux
	795	ENDIF
[102]	796	ENDIF
[19]	797
[102]	798	!
	799	!-- Initialization in case of a coupled model run
	800	IF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	801	tswst = 0.0
	802	IF ( ASSOCIATED( tswst_m ) ) tswst_m = tswst
	803	ENDIF
	804
[19]	805	ENDIF
	806
	807	!
[1]	808	!-- Initialize Prandtl layer quantities
	809	IF ( prandtl_layer ) THEN
	810
	811	z0 = roughness_length
	812
	813	IF ( .NOT. constant_heatflux ) THEN
	814	!
	815	!-- Surface temperature is prescribed. Here the heat flux cannot be
	816	!-- simply estimated, because therefore rif, u* and theta* would have
	817	!-- to be computed by iteration. This is why the heat flux is assumed
	818	!-- to be zero before the first time step. It approaches its correct
	819	!-- value in the course of the first few time steps.
	820	shf = 0.0
	821	IF ( ASSOCIATED( shf_m ) ) shf_m = 0.0
	822	ENDIF
	823
[75]	824	IF ( humidity .OR. passive_scalar ) THEN
[1]	825	IF ( .NOT. constant_waterflux ) THEN
	826	qsws = 0.0
	827	IF ( ASSOCIATED( qsws_m ) ) qsws_m = 0.0
	828	ENDIF
	829	ENDIF
	830
	831	ENDIF
	832
[152]	833
	834	!
[1]	835	!-- For the moment, perturbation pressure and vertical velocity are zero
	836	p = 0.0; w = 0.0
	837
	838	!
	839	!-- Initialize array sums (must be defined in first call of pres)
	840	sums = 0.0
	841
	842	!
[72]	843	!-- Treating cloud physics, liquid water content and precipitation amount
	844	!-- are zero at beginning of the simulation
	845	IF ( cloud_physics ) THEN
	846	ql = 0.0
	847	IF ( precipitation ) precipitation_amount = 0.0
	848	ENDIF
[673]	849
	850	!
	851	!-- Initialize quantities for special advections schemes
	852	CALL init_advec
[1]	853
	854	!
	855	!-- Impose vortex with vertical axis on the initial velocity profile
	856	IF ( INDEX( initializing_actions, 'initialize_vortex' ) /= 0 ) THEN
	857	CALL init_rankine
	858	ENDIF
	859
	860	!
	861	!-- Impose temperature anomaly (advection test only)
	862	IF ( INDEX( initializing_actions, 'initialize_ptanom' ) /= 0 ) THEN
	863	CALL init_pt_anomaly
	864	ENDIF
	865
	866	!
	867	!-- If required, change the surface temperature at the start of the 3D run
	868	IF ( pt_surface_initial_change /= 0.0 ) THEN
	869	pt(nzb,:,:) = pt(nzb,:,:) + pt_surface_initial_change
	870	ENDIF
	871
	872	!
	873	!-- If required, change the surface humidity/scalar at the start of the 3D
	874	!-- run
[75]	875	IF ( ( humidity .OR. passive_scalar ) .AND. &
[1]	876	q_surface_initial_change /= 0.0 ) THEN
	877	q(nzb,:,:) = q(nzb,:,:) + q_surface_initial_change
	878	ENDIF
	879
	880	!
	881	!-- Initialize the random number generator (from numerical recipes)
	882	CALL random_function_ini
	883
	884	!
	885	!-- Once again set the perturbation pressure explicitly to zero in order to
	886	!-- assure that it does not generate any divergences in the first time step.
	887	!-- At t=0 the velocity field is free of divergence (as constructed above).
	888	!-- Divergences being created during a time step are not yet known and thus
	889	!-- cannot be corrected during the time step yet.
	890	p = 0.0
	891
	892	!
	893	!-- Initialize old and new time levels.
	894	IF ( timestep_scheme(1:5) /= 'runge' ) THEN
	895	e_m = e; pt_m = pt; u_m = u; v_m = v; w_m = w; kh_m = kh; km_m = km
	896	ELSE
	897	te_m = 0.0; tpt_m = 0.0; tu_m = 0.0; tv_m = 0.0; tw_m = 0.0
	898	ENDIF
	899	e_p = e; pt_p = pt; u_p = u; v_p = v; w_p = w
	900
[75]	901	IF ( humidity .OR. passive_scalar ) THEN
[1]	902	IF ( ASSOCIATED( q_m ) ) q_m = q
	903	IF ( timestep_scheme(1:5) == 'runge' ) tq_m = 0.0
	904	q_p = q
[75]	905	IF ( humidity .AND. ASSOCIATED( vpt_m ) ) vpt_m = vpt
[1]	906	ENDIF
	907
[94]	908	IF ( ocean ) THEN
	909	tsa_m = 0.0
	910	sa_p = sa
	911	ENDIF
[667]	912
[94]	913
[147]	914	ELSEIF ( TRIM( initializing_actions ) == 'read_restart_data' .OR. &
[667]	915	TRIM( initializing_actions ) == 'cyclic_fill' ) &
[1]	916	THEN
	917	!
[328]	918	!-- When reading data for cyclic fill of 3D prerun data, first read
[147]	919	!-- some of the global variables from restart file
[328]	920	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
[559]	921
	922	CALL read_parts_of_var_list
[147]	923	CALL close_file( 13 )
[328]	924
[151]	925	!
[328]	926	!-- Initialization of the turbulence recycling method
	927	IF ( turbulent_inflow ) THEN
	928	!
	929	!-- Store temporally and horizontally averaged vertical profiles to be
	930	!-- used as mean inflow profiles
	931	ALLOCATE( mean_inflow_profiles(nzb:nzt+1,5) )
[151]	932
[328]	933	mean_inflow_profiles(:,1) = hom_sum(:,1,0) ! u
	934	mean_inflow_profiles(:,2) = hom_sum(:,2,0) ! v
	935	mean_inflow_profiles(:,4) = hom_sum(:,4,0) ! pt
	936	mean_inflow_profiles(:,5) = hom_sum(:,8,0) ! e
[151]	937
	938	!
[328]	939	!-- Use these mean profiles for the inflow (provided that Dirichlet
	940	!-- conditions are used)
	941	IF ( inflow_l ) THEN
[667]	942	DO j = nysg, nyng
[328]	943	DO k = nzb, nzt+1
[667]	944	u(k,j,nxlg:-1) = mean_inflow_profiles(k,1)
	945	v(k,j,nxlg:-1) = mean_inflow_profiles(k,2)
	946	w(k,j,nxlg:-1) = 0.0
	947	pt(k,j,nxlg:-1) = mean_inflow_profiles(k,4)
	948	e(k,j,nxlg:-1) = mean_inflow_profiles(k,5)
[328]	949	ENDDO
[151]	950	ENDDO
[328]	951	ENDIF
[151]	952
	953	!
[328]	954	!-- Calculate the damping factors to be used at the inflow. For a
	955	!-- turbulent inflow the turbulent fluctuations have to be limited
	956	!-- vertically because otherwise the turbulent inflow layer will grow
	957	!-- in time.
	958	IF ( inflow_damping_height == 9999999.9 ) THEN
[151]	959	!
[328]	960	!-- Default: use the inversion height calculated by the prerun; if
	961	!-- this is zero, inflow_damping_height must be explicitly
	962	!-- specified.
	963	IF ( hom_sum(nzb+6,pr_palm,0) /= 0.0 ) THEN
	964	inflow_damping_height = hom_sum(nzb+6,pr_palm,0)
	965	ELSE
	966	WRITE( message_string, * ) 'inflow_damping_height must be ',&
	967	'explicitly specified because&the inversion height ', &
	968	'calculated by the prerun is zero.'
	969	CALL message( 'init_3d_model', 'PA0318', 1, 2, 0, 6, 0 )
	970	ENDIF
	971
[292]	972	ENDIF
[151]	973
[328]	974	IF ( inflow_damping_width == 9999999.9 ) THEN
[151]	975	!
[328]	976	!-- Default for the transition range: one tenth of the undamped
	977	!-- layer
	978	inflow_damping_width = 0.1 * inflow_damping_height
[151]	979
[328]	980	ENDIF
[151]	981
[328]	982	ALLOCATE( inflow_damping_factor(nzb:nzt+1) )
[151]	983
[328]	984	DO k = nzb, nzt+1
[151]	985
[328]	986	IF ( zu(k) <= inflow_damping_height ) THEN
	987	inflow_damping_factor(k) = 1.0
	988	ELSEIF ( zu(k) <= inflow_damping_height + &
	989	inflow_damping_width ) THEN
	990	inflow_damping_factor(k) = 1.0 - &
[151]	991	( zu(k) - inflow_damping_height ) / &
	992	inflow_damping_width
[328]	993	ELSE
	994	inflow_damping_factor(k) = 0.0
	995	ENDIF
[151]	996
[328]	997	ENDDO
	998	ENDIF
[151]	999
[147]	1000	ENDIF
	1001
[152]	1002	!
[163]	1003	!-- Read binary data from restart file
[667]	1004
[559]	1005	CALL read_3d_binary
[163]	1006
	1007	!
[359]	1008	!-- Inside buildings set velocities and TKE back to zero
	1009	IF ( TRIM( initializing_actions ) == 'cyclic_fill' .AND. &
	1010	topography /= 'flat' ) THEN
	1011	!
	1012	!-- Inside buildings set velocities and TKE back to zero.
	1013	!-- Other scalars (pt, q, s, km, kh, p, sa, ...) are ignored at present,
	1014	!-- maybe revise later.
	1015	IF ( timestep_scheme(1:5) == 'runge' ) THEN
[667]	1016	DO i = nxlg, nxrg
	1017	DO j = nysg, nyng
[359]	1018	u (nzb:nzb_u_inner(j,i),j,i) = 0.0
	1019	v (nzb:nzb_v_inner(j,i),j,i) = 0.0
	1020	w (nzb:nzb_w_inner(j,i),j,i) = 0.0
	1021	e (nzb:nzb_w_inner(j,i),j,i) = 0.0
	1022	u_m(nzb:nzb_u_inner(j,i),j,i) = 0.0
	1023	v_m(nzb:nzb_v_inner(j,i),j,i) = 0.0
	1024	w_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1025	e_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1026	tu_m(nzb:nzb_u_inner(j,i),j,i) = 0.0
	1027	tv_m(nzb:nzb_v_inner(j,i),j,i) = 0.0
	1028	tw_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1029	te_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1030	tpt_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1031	ENDDO
	1032	ENDDO
	1033	ELSE
[667]	1034	DO i = nxlg, nxrg
	1035	DO j = nysg, nyng
[359]	1036	u (nzb:nzb_u_inner(j,i),j,i) = 0.0
	1037	v (nzb:nzb_v_inner(j,i),j,i) = 0.0
	1038	w (nzb:nzb_w_inner(j,i),j,i) = 0.0
	1039	e (nzb:nzb_w_inner(j,i),j,i) = 0.0
	1040	u_m(nzb:nzb_u_inner(j,i),j,i) = 0.0
	1041	v_m(nzb:nzb_v_inner(j,i),j,i) = 0.0
	1042	w_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1043	e_m(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1044	u_p(nzb:nzb_u_inner(j,i),j,i) = 0.0
	1045	v_p(nzb:nzb_v_inner(j,i),j,i) = 0.0
	1046	w_p(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1047	e_p(nzb:nzb_w_inner(j,i),j,i) = 0.0
	1048	ENDDO
	1049	ENDDO
	1050	ENDIF
	1051
	1052	ENDIF
	1053
	1054	!
[1]	1055	!-- Calculate initial temperature field and other constants used in case
	1056	!-- of a sloping surface
	1057	IF ( sloping_surface ) CALL init_slope
	1058
	1059	!
	1060	!-- Initialize new time levels (only done in order to set boundary values
	1061	!-- including ghost points)
	1062	e_p = e; pt_p = pt; u_p = u; v_p = v; w_p = w
[75]	1063	IF ( humidity .OR. passive_scalar ) q_p = q
[94]	1064	IF ( ocean ) sa_p = sa
[1]	1065
[181]	1066	!
	1067	!-- Allthough tendency arrays are set in prognostic_equations, they have
	1068	!-- have to be predefined here because they are used (but multiplied with 0)
	1069	!-- there before they are set.
	1070	IF ( timestep_scheme(1:5) == 'runge' ) THEN
	1071	te_m = 0.0; tpt_m = 0.0; tu_m = 0.0; tv_m = 0.0; tw_m = 0.0
	1072	IF ( humidity .OR. passive_scalar ) tq_m = 0.0
	1073	IF ( ocean ) tsa_m = 0.0
	1074	ENDIF
	1075
[1]	1076	ELSE
	1077	!
	1078	!-- Actually this part of the programm should not be reached
[254]	1079	message_string = 'unknown initializing problem'
	1080	CALL message( 'init_3d_model', 'PA0193', 1, 2, 0, 6, 0 )
[1]	1081	ENDIF
	1082
[151]	1083
	1084	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
[1]	1085	!
[151]	1086	!-- Initialize old timelevels needed for radiation boundary conditions
	1087	IF ( outflow_l ) THEN
	1088	u_m_l(:,:,:) = u(:,:,1:2)
	1089	v_m_l(:,:,:) = v(:,:,0:1)
	1090	w_m_l(:,:,:) = w(:,:,0:1)
	1091	ENDIF
	1092	IF ( outflow_r ) THEN
	1093	u_m_r(:,:,:) = u(:,:,nx-1:nx)
	1094	v_m_r(:,:,:) = v(:,:,nx-1:nx)
	1095	w_m_r(:,:,:) = w(:,:,nx-1:nx)
	1096	ENDIF
	1097	IF ( outflow_s ) THEN
	1098	u_m_s(:,:,:) = u(:,0:1,:)
	1099	v_m_s(:,:,:) = v(:,1:2,:)
	1100	w_m_s(:,:,:) = w(:,0:1,:)
	1101	ENDIF
	1102	IF ( outflow_n ) THEN
	1103	u_m_n(:,:,:) = u(:,ny-1:ny,:)
	1104	v_m_n(:,:,:) = v(:,ny-1:ny,:)
	1105	w_m_n(:,:,:) = w(:,ny-1:ny,:)
	1106	ENDIF
[667]	1107
[151]	1108	ENDIF
[680]	1109
[667]	1110	!
	1111	!-- Calculate the initial volume flow at the right and north boundary
	1112	IF ( conserve_volume_flow ) THEN
[151]	1113
[667]	1114	volume_flow_initial_l = 0.0
	1115	volume_flow_area_l = 0.0
	1116
	1117	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	1118
	1119	IF ( nxr == nx ) THEN
	1120	DO j = nys, nyn
	1121	DO k = nzb_2d(j,nx) + 1, nzt
	1122	volume_flow_initial_l(1) = volume_flow_initial_l(1) + &
	1123	hom_sum(k,1,0) * dzw(k)
	1124	volume_flow_area_l(1) = volume_flow_area_l(1) + dzw(k)
	1125	ENDDO
	1126	ENDDO
	1127	ENDIF
	1128
	1129	IF ( nyn == ny ) THEN
	1130	DO i = nxl, nxr
	1131	DO k = nzb_2d(ny,i) + 1, nzt
	1132	volume_flow_initial_l(2) = volume_flow_initial_l(2) + &
	1133	hom_sum(k,2,0) * dzw(k)
	1134	volume_flow_area_l(2) = volume_flow_area_l(2) + dzw(k)
	1135	ENDDO
	1136	ENDDO
	1137	ENDIF
	1138
	1139	ELSEIF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	1140
	1141	IF ( nxr == nx ) THEN
	1142	DO j = nys, nyn
	1143	DO k = nzb_2d(j,nx) + 1, nzt
	1144	volume_flow_initial_l(1) = volume_flow_initial_l(1) + &
	1145	u(k,j,nx) * dzw(k)
	1146	volume_flow_area_l(1) = volume_flow_area_l(1) + dzw(k)
	1147	ENDDO
	1148	ENDDO
	1149	ENDIF
	1150
	1151	IF ( nyn == ny ) THEN
	1152	DO i = nxl, nxr
	1153	DO k = nzb_2d(ny,i) + 1, nzt
	1154	volume_flow_initial_l(2) = volume_flow_initial_l(2) + &
	1155	v(k,ny,i) * dzw(k)
	1156	volume_flow_area_l(2) = volume_flow_area_l(2) + dzw(k)
	1157	ENDDO
	1158	ENDDO
	1159	ENDIF
	1160
	1161	ENDIF
	1162
	1163	#if defined( __parallel )
[680]	1164	CALL MPI_ALLREDUCE( volume_flow_initial_l(1), volume_flow_initial(1),&
	1165	2, MPI_REAL, MPI_SUM, comm2d, ierr )
	1166	CALL MPI_ALLREDUCE( volume_flow_area_l(1), volume_flow_area(1), &
	1167	2, MPI_REAL, MPI_SUM, comm2d, ierr )
[667]	1168
	1169	#else
[680]	1170	volume_flow_initial = volume_flow_initial_l
	1171	volume_flow_area = volume_flow_area_l
[667]	1172	#endif
	1173
[151]	1174	!
[667]	1175	!-- In case of 'bulk_velocity' mode, volume_flow_initial is overridden
	1176	!-- and calculated from u\|v_bulk instead.
[680]	1177	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	1178	volume_flow_initial(1) = u_bulk * volume_flow_area(1)
	1179	volume_flow_initial(2) = v_bulk * volume_flow_area(2)
	1180	ENDIF
[667]	1181
[680]	1182	ENDIF
	1183
	1184
[667]	1185	!
[680]	1186	!-- Impose random perturbation on the horizontal velocity field and then
	1187	!-- remove the divergences from the velocity field at the initial stage
	1188	IF ( create_disturbances .AND. &
	1189	TRIM( initializing_actions ) /= 'read_restart_data' .AND. &
	1190	TRIM( initializing_actions ) /= 'cyclic_fill' ) THEN
	1191
	1192	CALL disturb_field( nzb_u_inner, tend, u )
	1193	CALL disturb_field( nzb_v_inner, tend, v )
	1194	n_sor = nsor_ini
	1195	CALL pres
	1196	n_sor = nsor
	1197	ENDIF
	1198
	1199	!
[138]	1200	!-- Initialization of the leaf area density
[680]	1201	IF ( plant_canopy ) THEN
[138]	1202
	1203	SELECT CASE ( TRIM( canopy_mode ) )
	1204
	1205	CASE( 'block' )
	1206
[667]	1207	DO i = nxlg, nxrg
	1208	DO j = nysg, nyng
[138]	1209	lad_s(:,j,i) = lad(:)
	1210	cdc(:,j,i) = drag_coefficient
[153]	1211	IF ( passive_scalar ) THEN
	1212	sls(:,j,i) = leaf_surface_concentration
	1213	sec(:,j,i) = scalar_exchange_coefficient
	1214	ENDIF
[138]	1215	ENDDO
	1216	ENDDO
	1217
	1218	CASE DEFAULT
	1219
	1220	!
	1221	!-- The DEFAULT case is reached either if the parameter
	1222	!-- canopy mode contains a wrong character string or if the
	1223	!-- user has coded a special case in the user interface.
	1224	!-- There, the subroutine user_init_plant_canopy checks
	1225	!-- which of these two conditions applies.
	1226	CALL user_init_plant_canopy
	1227
	1228	END SELECT
	1229
[667]	1230	CALL exchange_horiz( lad_s, nbgp )
	1231	CALL exchange_horiz( cdc, nbgp )
[138]	1232
[153]	1233	IF ( passive_scalar ) THEN
[667]	1234	CALL exchange_horiz( sls, nbgp )
	1235	CALL exchange_horiz( sec, nbgp )
[153]	1236	ENDIF
	1237
	1238	!
	1239	!-- Sharp boundaries of the plant canopy in horizontal directions
	1240	!-- In vertical direction the interpolation is retained, as the leaf
	1241	!-- area density is initialised by prescribing a vertical profile
	1242	!-- consisting of piecewise linear segments. The upper boundary
	1243	!-- of the plant canopy is now defined by lad_w(pch_index,:,:) = 0.0.
	1244
[138]	1245	DO i = nxl, nxr
	1246	DO j = nys, nyn
	1247	DO k = nzb, nzt+1
[153]	1248	IF ( lad_s(k,j,i) > 0.0 ) THEN
	1249	lad_u(k,j,i) = lad_s(k,j,i)
	1250	lad_u(k,j,i+1) = lad_s(k,j,i)
	1251	lad_v(k,j,i) = lad_s(k,j,i)
	1252	lad_v(k,j+1,i) = lad_s(k,j,i)
	1253	ENDIF
[138]	1254	ENDDO
	1255	DO k = nzb, nzt
	1256	lad_w(k,j,i) = 0.5 * ( lad_s(k+1,j,i) + lad_s(k,j,i) )
	1257	ENDDO
	1258	ENDDO
	1259	ENDDO
	1260
[153]	1261	lad_w(pch_index,:,:) = 0.0
	1262	lad_w(nzt+1,:,:) = lad_w(nzt,:,:)
[138]	1263
[667]	1264	CALL exchange_horiz( lad_u, nbgp )
	1265	CALL exchange_horiz( lad_v, nbgp )
	1266	CALL exchange_horiz( lad_w, nbgp )
[153]	1267
	1268	!
	1269	!-- Initialisation of the canopy heat source distribution
	1270	IF ( cthf /= 0.0 ) THEN
	1271	!
	1272	!-- Piecewise evaluation of the leaf area index by
	1273	!-- integration of the leaf area density
	1274	lai(:,:,:) = 0.0
[667]	1275	DO i = nxlg, nxrg
	1276	DO j = nysg, nyng
[153]	1277	DO k = pch_index-1, 0, -1
	1278	lai(k,j,i) = lai(k+1,j,i) + &
	1279	( 0.5 * ( lad_w(k+1,j,i) + &
	1280	lad_s(k+1,j,i) ) * &
	1281	( zw(k+1) - zu(k+1) ) ) + &
	1282	( 0.5 * ( lad_w(k,j,i) + &
	1283	lad_s(k+1,j,i) ) * &
	1284	( zu(k+1) - zw(k) ) )
	1285	ENDDO
	1286	ENDDO
	1287	ENDDO
	1288
	1289	!
	1290	!-- Evaluation of the upward kinematic vertical heat flux within the
	1291	!-- canopy
[667]	1292	DO i = nxlg, nxrg
	1293	DO j = nysg, nyng
[153]	1294	DO k = 0, pch_index
	1295	canopy_heat_flux(k,j,i) = cthf * &
	1296	exp( -0.6 * lai(k,j,i) )
	1297	ENDDO
	1298	ENDDO
	1299	ENDDO
	1300
	1301	!
	1302	!-- The near surface heat flux is derived from the heat flux
	1303	!-- distribution within the canopy
	1304	shf(:,:) = canopy_heat_flux(0,:,:)
	1305
	1306	IF ( ASSOCIATED( shf_m ) ) shf_m = shf
	1307
	1308	ENDIF
	1309
[138]	1310	ENDIF
	1311
	1312	!
[1]	1313	!-- If required, initialize dvrp-software
	1314	IF ( dt_dvrp /= 9999999.9 ) CALL init_dvrp
	1315
[96]	1316	IF ( ocean ) THEN
[1]	1317	!
[96]	1318	!-- Initialize quantities needed for the ocean model
	1319	CALL init_ocean
[388]	1320
[96]	1321	ELSE
	1322	!
	1323	!-- Initialize quantities for handling cloud physics
	1324	!-- This routine must be called before init_particles, because
	1325	!-- otherwise, array pt_d_t, needed in data_output_dvrp (called by
	1326	!-- init_particles) is not defined.
	1327	CALL init_cloud_physics
	1328	ENDIF
[1]	1329
	1330	!
	1331	!-- If required, initialize particles
[63]	1332	IF ( particle_advection ) CALL init_particles
[1]	1333
	1334	!
[673]	1335	!-- Initialize the ws-scheme.
	1336	IF ( ws_scheme_sca .OR. ws_scheme_mom ) CALL ws_init
[1]	1337
	1338	!
[673]	1339	!-- Setting weighting factors for right evaluation of perturbation pressure
	1340	!-- and turbulent quantities during the RK substeps.
	1341	IF ( TRIM(timestep_scheme) == 'runge-kutta-3' ) THEN ! RK3
	1342	weight_substep(1) = 0.166666666666666
	1343	weight_substep(2) = 0.3
	1344	weight_substep(3) = 0.533333333333333
	1345
	1346	weight_pres(1) = 0.333333333333333
	1347	weight_pres(2) = 0.416666666666666
	1348	weight_pres(3) = 0.25
	1349	ELSEIF ( TRIM(timestep_scheme) == 'runge-kutta-2' ) THEN ! RK2
	1350	weight_substep(1) = 0.5
	1351	weight_substep(2) = 0.5
	1352
	1353	weight_pres(1) = 0.5
	1354	weight_pres(2) = 0.5
	1355	ELSE ! Euler and Leapfrog
	1356	weight_substep(1) = 1.0
	1357	weight_pres(1) = 1.0
	1358	ENDIF
	1359
	1360	!
[1]	1361	!-- Initialize Rayleigh damping factors
	1362	rdf = 0.0
	1363	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	1364	IF ( .NOT. ocean ) THEN
	1365	DO k = nzb+1, nzt
	1366	IF ( zu(k) >= rayleigh_damping_height ) THEN
	1367	rdf(k) = rayleigh_damping_factor * &
[1]	1368	( SIN( pi * 0.5 * ( zu(k) - rayleigh_damping_height ) &
	1369	/ ( zu(nzt) - rayleigh_damping_height ) )&
	1370	)**2
[108]	1371	ENDIF
	1372	ENDDO
	1373	ELSE
	1374	DO k = nzt, nzb+1, -1
	1375	IF ( zu(k) <= rayleigh_damping_height ) THEN
	1376	rdf(k) = rayleigh_damping_factor * &
	1377	( SIN( pi * 0.5 * ( rayleigh_damping_height - zu(k) ) &
	1378	/ ( rayleigh_damping_height - zu(nzb+1)))&
	1379	)**2
	1380	ENDIF
	1381	ENDDO
	1382	ENDIF
[1]	1383	ENDIF
	1384
	1385	!
[240]	1386	!-- Initialize the starting level and the vertical smoothing factor used for
	1387	!-- the external pressure gradient
	1388	dp_smooth_factor = 1.0
	1389	IF ( dp_external ) THEN
	1390	!
	1391	!-- Set the starting level dp_level_ind_b only if it has not been set before
	1392	!-- (e.g. in init_grid).
	1393	IF ( dp_level_ind_b == 0 ) THEN
	1394	ind_array = MINLOC( ABS( dp_level_b - zu ) )
	1395	dp_level_ind_b = ind_array(1) - 1 + nzb
	1396	! MINLOC uses lower array bound 1
	1397	ENDIF
	1398	IF ( dp_smooth ) THEN
	1399	dp_smooth_factor(:dp_level_ind_b) = 0.0
	1400	DO k = dp_level_ind_b+1, nzt
	1401	dp_smooth_factor(k) = 0.5 * ( 1.0 + SIN( pi * &
	1402	( REAL( k - dp_level_ind_b ) / &
	1403	REAL( nzt - dp_level_ind_b ) - 0.5 ) ) )
	1404	ENDDO
	1405	ENDIF
	1406	ENDIF
	1407
	1408	!
[1]	1409	!-- Initialize diffusivities used within the outflow damping layer in case of
	1410	!-- non-cyclic lateral boundaries. A linear increase is assumed over the first
	1411	!-- half of the width of the damping layer
[73]	1412	IF ( bc_lr == 'dirichlet/radiation' ) THEN
[1]	1413
[667]	1414	DO i = nxlg, nxrg
[73]	1415	IF ( i >= nx - outflow_damping_width ) THEN
	1416	km_damp_x(i) = km_damp_max * MIN( 1.0, &
	1417	( i - ( nx - outflow_damping_width ) ) / &
	1418	REAL( outflow_damping_width/2 ) &
	1419	)
	1420	ELSE
	1421	km_damp_x(i) = 0.0
	1422	ENDIF
	1423	ENDDO
[1]	1424
[73]	1425	ELSEIF ( bc_lr == 'radiation/dirichlet' ) THEN
[1]	1426
[667]	1427	DO i = nxlg, nxrg
[73]	1428	IF ( i <= outflow_damping_width ) THEN
	1429	km_damp_x(i) = km_damp_max * MIN( 1.0, &
	1430	( outflow_damping_width - i ) / &
	1431	REAL( outflow_damping_width/2 ) &
	1432	)
	1433	ELSE
	1434	km_damp_x(i) = 0.0
	1435	ENDIF
	1436	ENDDO
[1]	1437
[73]	1438	ENDIF
[1]	1439
[73]	1440	IF ( bc_ns == 'dirichlet/radiation' ) THEN
[1]	1441
[667]	1442	DO j = nysg, nyng
[73]	1443	IF ( j >= ny - outflow_damping_width ) THEN
	1444	km_damp_y(j) = km_damp_max * MIN( 1.0, &
	1445	( j - ( ny - outflow_damping_width ) ) / &
	1446	REAL( outflow_damping_width/2 ) &
	1447	)
	1448	ELSE
	1449	km_damp_y(j) = 0.0
[1]	1450	ENDIF
	1451	ENDDO
	1452
[73]	1453	ELSEIF ( bc_ns == 'radiation/dirichlet' ) THEN
[1]	1454
[667]	1455	DO j = nysg, nyng
[73]	1456	IF ( j <= outflow_damping_width ) THEN
	1457	km_damp_y(j) = km_damp_max * MIN( 1.0, &
	1458	( outflow_damping_width - j ) / &
	1459	REAL( outflow_damping_width/2 ) &
	1460	)
	1461	ELSE
	1462	km_damp_y(j) = 0.0
[1]	1463	ENDIF
[73]	1464	ENDDO
[1]	1465
	1466	ENDIF
	1467
	1468	!
	1469	!-- Initialize local summation arrays for UP flow_statistics. This is necessary
	1470	!-- because they may not yet have been initialized when they are called from
	1471	!-- flow_statistics (or - depending on the chosen model run - are never
	1472	!-- initialized)
	1473	sums_divnew_l = 0.0
	1474	sums_divold_l = 0.0
	1475	sums_l_l = 0.0
	1476	sums_up_fraction_l = 0.0
	1477	sums_wsts_bc_l = 0.0
	1478
	1479	!
	1480	!-- Pre-set masks for regional statistics. Default is the total model domain.
	1481	rmask = 1.0
	1482
	1483	!
[51]	1484	!-- User-defined initializing actions. Check afterwards, if maximum number
	1485	!-- of allowed timeseries is not exceeded
[1]	1486	CALL user_init
	1487
[51]	1488	IF ( dots_num > dots_max ) THEN
[254]	1489	WRITE( message_string, * ) 'number of time series quantities exceeds', &
[274]	1490	' its maximum of dots_max = ', dots_max, &
[254]	1491	' &Please increase dots_max in modules.f90.'
	1492	CALL message( 'init_3d_model', 'PA0194', 1, 2, 0, 6, 0 )
[51]	1493	ENDIF
	1494
[1]	1495	!
	1496	!-- Input binary data file is not needed anymore. This line must be placed
	1497	!-- after call of user_init!
	1498	CALL close_file( 13 )
	1499
	1500	!
	1501	!-- Compute total sum of active mask grid points
	1502	!-- ngp_2dh: number of grid points of a horizontal cross section through the
	1503	!-- total domain
	1504	!-- ngp_3d: number of grid points of the total domain
[132]	1505	ngp_2dh_outer_l = 0
	1506	ngp_2dh_outer = 0
	1507	ngp_2dh_s_inner_l = 0
	1508	ngp_2dh_s_inner = 0
	1509	ngp_2dh_l = 0
	1510	ngp_2dh = 0
[485]	1511	ngp_3d_inner_l = 0.0
[132]	1512	ngp_3d_inner = 0
	1513	ngp_3d = 0
	1514	ngp_sums = ( nz + 2 ) * ( pr_palm + max_pr_user )
[1]	1515
	1516	DO sr = 0, statistic_regions
	1517	DO i = nxl, nxr
	1518	DO j = nys, nyn
	1519	IF ( rmask(j,i,sr) == 1.0 ) THEN
	1520	!
	1521	!-- All xy-grid points
	1522	ngp_2dh_l(sr) = ngp_2dh_l(sr) + 1
	1523	!
	1524	!-- xy-grid points above topography
	1525	DO k = nzb_s_outer(j,i), nz + 1
	1526	ngp_2dh_outer_l(k,sr) = ngp_2dh_outer_l(k,sr) + 1
	1527	ENDDO
[132]	1528	DO k = nzb_s_inner(j,i), nz + 1
	1529	ngp_2dh_s_inner_l(k,sr) = ngp_2dh_s_inner_l(k,sr) + 1
	1530	ENDDO
[1]	1531	!
	1532	!-- All grid points of the total domain above topography
	1533	ngp_3d_inner_l(sr) = ngp_3d_inner_l(sr) + &
	1534	( nz - nzb_s_inner(j,i) + 2 )
	1535	ENDIF
	1536	ENDDO
	1537	ENDDO
	1538	ENDDO
	1539
	1540	sr = statistic_regions + 1
	1541	#if defined( __parallel )
[622]	1542	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[485]	1543	CALL MPI_ALLREDUCE( ngp_2dh_l(0), ngp_2dh(0), sr, MPI_INTEGER, MPI_SUM, &
[1]	1544	comm2d, ierr )
[622]	1545	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[485]	1546	CALL MPI_ALLREDUCE( ngp_2dh_outer_l(0,0), ngp_2dh_outer(0,0), (nz+2)*sr, &
[1]	1547	MPI_INTEGER, MPI_SUM, comm2d, ierr )
[622]	1548	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[485]	1549	CALL MPI_ALLREDUCE( ngp_2dh_s_inner_l(0,0), ngp_2dh_s_inner(0,0), &
[132]	1550	(nz+2)*sr, MPI_INTEGER, MPI_SUM, comm2d, ierr )
[622]	1551	IF ( collective_wait ) CALL MPI_BARRIER( comm2d, ierr )
[485]	1552	CALL MPI_ALLREDUCE( ngp_3d_inner_l(0), ngp_3d_inner_tmp(0), sr, MPI_REAL, &
[1]	1553	MPI_SUM, comm2d, ierr )
[485]	1554	ngp_3d_inner = INT( ngp_3d_inner_tmp, KIND = SELECTED_INT_KIND( 18 ) )
[1]	1555	#else
[132]	1556	ngp_2dh = ngp_2dh_l
	1557	ngp_2dh_outer = ngp_2dh_outer_l
	1558	ngp_2dh_s_inner = ngp_2dh_s_inner_l
[485]	1559	ngp_3d_inner = INT( ngp_3d_inner_l, KIND = SELECTED_INT_KIND( 18 ) )
[1]	1560	#endif
	1561
[560]	1562	ngp_3d = INT ( ngp_2dh, KIND = SELECTED_INT_KIND( 18 ) ) * &
	1563	INT ( (nz + 2 ), KIND = SELECTED_INT_KIND( 18 ) )
[1]	1564
	1565	!
	1566	!-- Set a lower limit of 1 in order to avoid zero divisions in flow_statistics,
	1567	!-- buoyancy, etc. A zero value will occur for cases where all grid points of
	1568	!-- the respective subdomain lie below the surface topography
[667]	1569	ngp_2dh_outer = MAX( 1, ngp_2dh_outer(:,:) )
[631]	1570	ngp_3d_inner = MAX( INT(1, KIND = SELECTED_INT_KIND( 18 )), &
	1571	ngp_3d_inner(:) )
[667]	1572	ngp_2dh_s_inner = MAX( 1, ngp_2dh_s_inner(:,:) )
[1]	1573
[485]	1574	DEALLOCATE( ngp_2dh_l, ngp_2dh_outer_l, ngp_3d_inner_l, ngp_3d_inner_tmp )
[1]	1575
	1576
	1577	END SUBROUTINE init_3d_model

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |