Home

Context Navigation

indoor_model_mod.f90 @ 4868

Last change on this file since 4868 was 4850, checked in by suehring, 4 years ago
Bugfix in indoor model: consider previous indoor temperature during restarts; Further bugfix in mpi-io restart mechanism for the waste-heat flux from buildings
Property svn:keywords set to `Id`
File size: 113.9 KB

Rev	Line
[4246]	1	!> @file indoor_model_mod.f90
[4646]	2	!--------------------------------------------------------------------------------------------------!
[4246]	3	! This file is part of the PALM model system.
	4	!
[4646]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[4246]	8	!
[4646]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[4246]	12	!
[4646]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[4246]	15	!
[4828]	16	! Copyright 2018-2021 Leibniz Universitaet Hannover
	17	! Copyright 2018-2021 Hochschule Offenburg
[4646]	18	!--------------------------------------------------------------------------------------------------!
[4246]	19	!
	20	! Current revisions:
	21	! -----------------
[4730]	22	!
[4783]	23	!
[4246]	24	! Former revisions:
	25	! -----------------
	26	! $Id: indoor_model_mod.f90 4850 2021-01-21 17:59:25Z raasch $
[4850]	27	! Enable restart mechanism for previous indoor temperature
	28	!
	29	! 4843 2021-01-15 15:22:11Z raasch
[4843]	30	! local namelist parameter added to switch off the module although the respective module namelist
	31	! appears in the namelist file
	32	!
	33	! 4842 2021-01-14 10:42:28Z raasch
[4842]	34	! reading of namelist file and actions in case of namelist errors revised so that statement labels
	35	! and goto statements are not required any more
	36	!
	37	! 4828 2021-01-05 11:21:41Z Giersch
[4783]	38	! Change parameters for summer_pars and winter_pars (responsible: S. Rissmann)
	39	!
	40	! 4780 2020-11-10 11:17:10Z suehring
[4768]	41	! Enable 3D data output also with 64-bit precision
	42	!
	43	! 4750 2020-10-16 14:27:48Z suehring
[4750]	44	! - Namelist parameter added to switch-off/on the indoor model during wall/soil spinup
	45	! - Bugfix in window-wall treatment during spinup - in the urban-surface model the window fraction
	46	! is set to zero during spinup, so it is done here also
	47	! - Bugfix in wall treatment - inner wall temperature was too low due to wrong weighting of
	48	! wall/green/window fractions
	49	!
	50	! 4730 2020-10-07 10:48:51Z suehring
[4730]	51	! Bugfix - avoid divisions by zero
	52	!
	53	! 4709 2020-09-28 19:20:00Z maronga
[4709]	54	! Bugfix: avoid division by zero in case of zero window fraction (now also for vertical walls).
	55	! Reactivated waste heat.
	56	!
	57	! 4704 2020-09-28 10:13:03Z maronga
[4704]	58	! Bugfix: avoid division by zero in case of zero window fraction
	59	!
	60	! 4702 2020-09-27 18:39:00Z maronga
[4702]	61	! Removed unused variable indoor_wall_window_temperature
	62	!
	63	! 4701 2020-09-27 11:02:15Z maronga
[4701]	64	! Heat transfer for wall and windows back to USM separated into q_wall and q_win (instead q_wall_win).
	65	! Heat flow direction revised (heat flow positive from outside to inside).
	66	! New variable indoor_wall_temperature (for q_wall).
	67	! Removed unused quantity q_trans.
	68	!
	69	! 4698 2020-09-25 08:37:55Z maronga
[4698]	70	! Fixed faulty characters
	71	!
	72	! 4687 2020-09-21 19:40:16Z maronga
[4687]	73	! Bugfix: values of theta_m_t_prev were not stored for individual surfaces and thus re-used by all
	74	! surfaces and buildings, which led to excessive indoor temperatures
	75	!
	76	! 4681 2020-09-16 10:23:06Z pavelkrc
[4681]	77	! Bugfix for implementation of downward surfaces
	78	!
	79	! 4671 2020-09-09 20:27:58Z pavelkrc
[4671]	80	! Implementation of downward facing USM and LSM surfaces
	81	!
	82	! 4646 2020-08-24 16:02:40Z raasch
[4646]	83	! file re-formatted to follow the PALM coding standard
	84	!
	85	! 4481 2020-03-31 18:55:54Z maronga
	86	! Change order of dimension in surface array %frac to allow for better vectorization.
	87	!
[4442]	88	! 4441 2020-03-04 19:20:35Z suehring
[4646]	89	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly calculated
	90	! leading to unrealistically high energy demands and thus to unreallistically high waste-heat
	91	! fluxes.
	92	!
[4402]	93	! 4346 2019-12-18 11:55:56Z motisi
[4646]	94	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
	95	! information used in wall_flags_static_0
	96	!
[4346]	97	! 4329 2019-12-10 15:46:36Z motisi
[4329]	98	! Renamed wall_flags_0 to wall_flags_static_0
[4646]	99	!
[4329]	100	! 4310 2019-11-26 19:01:28Z suehring
[4646]	101	! Remove dt_indoor from namelist input. The indoor model is an hourly-based model, calling it
	102	! more/less often lead to inaccurate results.
	103	!
[4310]	104	! 4299 2019-11-22 10:13:38Z suehring
[4646]	105	! Output of indoor temperature revised (to avoid non-defined values within buildings)
	106	!
[4299]	107	! 4267 2019-10-16 18:58:49Z suehring
[4267]	108	! Bugfix in initialization, some indices to access building_pars where wrong.
	109	! Introduction of seasonal parameters.
[4646]	110	!
[4267]	111	! 4246 2019-09-30 09:27:52Z pavelkrc
[4646]	112	!
	113	!
[4245]	114	! 4242 2019-09-27 12:59:10Z suehring
[4246]	115	! Bugfix in array index
[4646]	116	!
[4246]	117	! 4238 2019-09-25 16:06:01Z suehring
	118	! - Bugfix in determination of minimum facade height and in location message
	119	! - Bugfix, avoid division by zero
[4646]	120	! - Some optimization
	121	!
[4246]	122	! 4227 2019-09-10 18:04:34Z gronemeier
	123	! implement new palm_date_time_mod
	124	!
	125	! 4217 2019-09-04 09:47:05Z scharf
	126	! Corrected "Former revisions" section
	127	!
	128	! 4209 2019-09-02 12:00:03Z suehring
	129	! - Bugfix in initialization of indoor temperature
[4646]	130	! - Prescibe default indoor temperature in case it is not given in the namelist input
[4246]	131	!
	132	! 4182 2019-08-21 14:37:54Z scharf
	133	! Corrected "Former revisions" section
[4646]	134	!
[4246]	135	! 4148 2019-08-08 11:26:00Z suehring
[4646]	136	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing is now considered at
	137	! the correct level.
[4246]	138	! - change calculation of a_m and c_m
	139	! - change calculation of u-values (use h_es in building array)
	140	! - rename h_tr_... to h_t_...
	141	! h_tr_em to h_t_wm
	142	! h_tr_op to h_t_wall
	143	! h_tr_w to h_t_es
	144	! - rename h_ve to h_v
	145	! - rename h_is to h_ms
	146	! - inserted net_floor_area
	147	! - inserted params_waste_heat_h, params_waste_heat_c from building database
	148	! in building array
	149	! - change calculation of q_waste_heat
[4646]	150	! - bugfix in averaging mean indoor temperature
	151	!
[4246]	152	! 3759 2019-02-21 15:53:45Z suehring
	153	! - Calculation of total building volume
	154	! - Several bugfixes
	155	! - Calculation of building height revised
[4646]	156	!
[4246]	157	! 3745 2019-02-15 18:57:56Z suehring
	158	! - remove building_type from module
[4646]	159	! - initialize parameters for each building individually instead of a bulk initializaion with
	160	! identical building type for all
[4246]	161	! - output revised
	162	! - add missing _wp
	163	! - some restructuring of variables in building data structure
[4646]	164	!
[4246]	165	! 3744 2019-02-15 18:38:58Z suehring
	166	! Some interface calls moved to module_interface + cleanup
[4646]	167	!
[4246]	168	! 3469 2018-10-30 20:05:07Z kanani
	169	! Initial revision (tlang, suehring, kanani, srissman)!
	170	!
	171	! Authors:
	172	! --------
	173	! @author Tobias Lang
	174	! @author Jens Pfafferott
	175	! @author Farah Kanani-Suehring
	176	! @author Matthias Suehring
[4698]	177	! @author Sascha Rissmann
	178	! @author Bjoern Maronga
[4246]	179	!
	180	!
	181	! Description:
	182	! ------------
	183	!> Module for Indoor Climate Model (ICM)
	184	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
	185	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
[4646]	186	!> This module differs between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine
	187	!> thermal comfort
	188	!> the heat transfer between indoor and outdoor is simplified
[4246]	189
[4646]	190	!> @todo Many statement comments that are given as doxygen comments need to be changed to normal comments
[4246]	191	!> @todo Replace window_area_per_facade by %frac(1,m) for window
[4646]	192	!> @todo emissivity change for window blinds if solar_protection_on=1
[4246]	193
	194	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
	195	!> @note How to write indoor temperature output to pt array?
	196	!>
[4687]	197	!> @bug Calculation of iwghf_eb and iwghf_eb_window is faulty
[4646]	198	!--------------------------------------------------------------------------------------------------!
	199	MODULE indoor_model_mod
[4246]	200
[4646]	201	USE arrays_3d, &
	202	ONLY: ddzw, &
	203	dzw, &
[4402]	204	pt
	205
[4646]	206	USE control_parameters, &
[4246]	207	ONLY: initializing_actions
	208
	209	USE kinds
[4646]	210
	211	USE netcdf_data_input_mod, &
[4246]	212	ONLY: building_id_f, building_type_f
	213
[4646]	214	USE palm_date_time_mod, &
	215	ONLY: get_date_time, northward_equinox, seconds_per_hour, southward_equinox
[4267]	216
[4646]	217	USE surface_mod, &
[4246]	218	ONLY: surf_usm_h, surf_usm_v
	219
	220
	221	IMPLICIT NONE
	222
	223	!
	224	!-- Define data structure for buidlings.
	225	TYPE build
	226
	227	INTEGER(iwp) :: id !< building ID
[4646]	228	INTEGER(iwp) :: kb_max !< highest vertical index of a building
[4246]	229	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
	230	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
	231	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
	232	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
	233	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
	234	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
	235
[4681]	236	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_h !< index array linking surface-element orientation index
	237	!< for horizontal surfaces with building
[4246]	238	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
[4646]	239	!< for vertical surfaces with building
[4246]	240	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
	241	!< horizontal surfaces with building
[4646]	242	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
[4246]	243	!< vertical surfaces with building
[4646]	244	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
[4246]	245	!< and height level
	246	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
	247	!< and height level
	248
[4646]	249
[4246]	250	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
[4646]	251
[4246]	252	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
	253	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
	254	REAL(wp) :: area_facade !< [m2] area of total facade
	255	REAL(wp) :: building_height !< building height
	256	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
	257	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
	258	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
[4646]	259	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
[4246]	260	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
	261	REAL(wp) :: f_c_win !< [-] shading factor
[4402]	262	REAL(wp) :: fapf !< [m2/m2] floor area per facade
[4246]	263	REAL(wp) :: g_value_win !< [-] SHGC factor
[4646]	264	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
[4246]	265	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
	266	REAL(wp) :: height_storey !< [m] storey heigth
	267	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
[4646]	268	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with
	269	!< eta = 0.9 or -2 for WP with COP = 3
[4246]	270	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
	271	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
	272	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
	273	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
	274	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
	275	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
	276	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
	277	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
	278	REAL(wp) :: net_floor_area !< [m2] netto ground area
	279	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
	280	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
	281	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
	282	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
	283	REAL(wp) :: vol_tot !< [m3] total building volume
	284
	285	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
	286	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
[4687]	287	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_h !< [degree_C] value of theta_m_t from previous time step (horizontal)
	288	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_v !< [degree_C] value of theta_m_t from previous time step (vertical)
[4246]	289	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
	290	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
	291	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
[4646]	292
[4246]	293	END TYPE build
	294
	295	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
	296
[4750]	297	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
	298	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
	299	INTEGER(iwp) :: num_build !< total number of buildings in domain
	300	INTEGER(iwp) :: solar_protection_off !< Solar protection off
	301	INTEGER(iwp) :: solar_protection_on !< Solar protection on
	302
	303	LOGICAL :: indoor_during_spinup = .FALSE. !< namelist parameter used to switch-off/on the indoor model during spinup
[4246]	304	!
	305	!-- Declare all global variables within the module
[4646]	306
	307	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to
	308	!< 3600.0 due to model requirements
	309	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	310	!< surface and air (chap. 7.2.2.2)
	311	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	312	!< component and surface (chap. 12.2.2)
	313	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly
	314	!< cooling 2.0_wp
	315	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
	316	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
	317	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
	318	!< Datenbank 27 window_area_per_facade_percent
	319	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
	320	!< on facade exceeds this value
	321
[4246]	322	REAL(wp) :: a_m !< [m2] the effective mass-related area
	323	REAL(wp) :: air_change !< [1/h] Airflow
	324	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
	325	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
	326	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
	327	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
	328	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
[4646]	329	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
	330	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
	331	!< glazed walls (assumption: thermal mass=0)
[4246]	332	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
	333	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
	334	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
	335	!< thermal mass) contains of h_t_wm and h_t_ms
[4646]	336	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the
	337	!< thermal mass)
[4246]	338	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
	339	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
	340	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
	341	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
	342	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
[4646]	343	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
[4246]	344	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
	345	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
[4646]	346	!< reach the demanded required temperature (heating is positive,
	347	!< cooling is negative)
[4246]	348	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
	349	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
	350	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
	351	REAL(wp) :: phi_sol !< [W] solar loads
[4646]	352	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
[4701]	353	REAL(wp) :: q_wall !< [W/m2]heat flux from indoor into wall
	354	REAL(wp) :: q_win !< [W/m2]heat flux from indoor into window
[4246]	355	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
[4646]	356
[4246]	357	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
	358	!< and external heatsources (for energy bilanz)
[4646]	359	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non
	360	!< thermal mass (for energy bilanz)
[4246]	361	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
	362	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
	363	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
[4646]	364
[4246]	365	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
	366	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
	367	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
	368	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
[4646]	369	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
[4246]	370	!< of 10 W/m2
	371	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
	372	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
	373	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
[4687]	374	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature during timestep
[4246]	375	REAL(wp) :: theta_op !< [degree_C] operative temperature
	376	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
	377	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
	378	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
	379	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
[4646]	380
[4267]	381	!
	382	!-- Definition of seasonal parameters, summer and winter, for different building types
[4646]	383	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
	384	0.5_wp, & ! basical airflow without occupancy of the room
[4780]	385	1.5_wp, & ! additional airflow depend of occupancy of the room
[4646]	386	0.5_wp, & ! building_type 2: basical airflow without occupancy
	387	! of the room
	388	1.5_wp, & ! additional airflow depend of occupancy of the room
[4780]	389	0.5_wp, & ! building_type 3: basical airflow without occupancy
[4646]	390	! of the room
	391	1.5_wp, & ! additional airflow depend of occupancy of the room
[4780]	392	1.0_wp, & ! building_type 4: basical airflow without occupancy
[4646]	393	! of the room
[4780]	394	1.0_wp, & ! additional airflow depend of occupancy of the room
	395	1.0_wp, & ! building_type 5: basical airflow without occupancy
[4646]	396	! of the room
[4780]	397	1.0_wp, & ! additional airflow depend of occupancy of the room
	398	1.0_wp, & ! building_type 6: basical airflow without occupancy
	399	! of the room
	400	1.0_wp, & ! additional airflow depend of occupancy of the room
	401	1.0_wp, & ! building_type 7: basical airflow without occupancy
	402	! of the room
	403	1.0_wp & ! additional airflow depend of occupancy of the room
[4267]	404	/), (/ 2, 7 /) )
[4246]	405
[4646]	406	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
[4780]	407	0.5_wp, & ! basical airflow without occupancy of the room
	408	0.0_wp, & ! additional airflow depend of occupancy of the room
	409	0.5_wp, & ! building_type 2: basical airflow without occupancy
[4646]	410	! of the room
[4780]	411	0.0_wp, & ! additional airflow depend of occupancy of the room
	412	0.5_wp, & ! building_type 3: basical airflow without occupancy
[4646]	413	! of the room
[4780]	414	0.0_wp, & ! additional airflow depend of occupancy of the room
	415	0.2_wp, & ! building_type 4: basical airflow without occupancy
[4646]	416	! of the room
[4780]	417	0.8_wp, & ! additional airflow depend of occupancy of the room
	418	0.2_wp, & ! building_type 5: basical airflow without occupancy
[4646]	419	! of the room
[4780]	420	0.8_wp, & ! additional airflow depend of occupancy of the room
	421	0.2_wp, & ! building_type 6: basical airflow without occupancy
[4646]	422	! of the room
[4780]	423	0.8_wp, & ! additional airflow depend of occupancy of the room
	424	0.2_wp, & ! building_type 7: basical airflow without occupancy
[4646]	425	! of the room
[4780]	426	0.8_wp & ! additional airflow depend of occupancy of the room
[4267]	427	/), (/ 2, 7 /) )
	428
[4246]	429	SAVE
	430
	431
	432	PRIVATE
[4646]	433
[4246]	434	!
	435	!-- Add INTERFACES that must be available to other modules
[4646]	436	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, im_check_data_output, &
	437	im_data_output_3d, im_check_parameters
[4246]	438
[4646]	439
[4246]	440	!
	441	!-- Add VARIABLES that must be available to other modules
[4750]	442	PUBLIC dt_indoor, &
	443	indoor_during_spinup, &
	444	skip_time_do_indoor, &
	445	time_indoor
[4246]	446
	447	!
	448	!-- PALM interfaces:
	449	!-- Data output checks for 2D/3D data to be done in check_parameters
	450	INTERFACE im_check_data_output
	451	MODULE PROCEDURE im_check_data_output
	452	END INTERFACE im_check_data_output
	453	!
	454	!-- Input parameter checks to be done in check_parameters
	455	INTERFACE im_check_parameters
	456	MODULE PROCEDURE im_check_parameters
	457	END INTERFACE im_check_parameters
	458	!
	459	!-- Data output of 3D data
	460	INTERFACE im_data_output_3d
	461	MODULE PROCEDURE im_data_output_3d
	462	END INTERFACE im_data_output_3d
	463
	464	!
	465	!-- Definition of data output quantities
	466	INTERFACE im_define_netcdf_grid
	467	MODULE PROCEDURE im_define_netcdf_grid
	468	END INTERFACE im_define_netcdf_grid
[4646]	469	!
[4246]	470	! !
	471	! !-- Output of information to the header file
	472	! INTERFACE im_header
	473	! MODULE PROCEDURE im_header
	474	! END INTERFACE im_header
	475	!
[4646]	476	!-- Calculations for indoor temperatures
[4246]	477	INTERFACE im_calc_temperatures
	478	MODULE PROCEDURE im_calc_temperatures
	479	END INTERFACE im_calc_temperatures
	480	!
[4646]	481	!-- Initialization actions
[4246]	482	INTERFACE im_init
	483	MODULE PROCEDURE im_init
	484	END INTERFACE im_init
	485	!
[4646]	486	!-- Main part of indoor model
[4246]	487	INTERFACE im_main_heatcool
	488	MODULE PROCEDURE im_main_heatcool
	489	END INTERFACE im_main_heatcool
	490	!
	491	!-- Reading of NAMELIST parameters
	492	INTERFACE im_parin
	493	MODULE PROCEDURE im_parin
	494	END INTERFACE im_parin
	495
	496	CONTAINS
	497
[4646]	498	!--------------------------------------------------------------------------------------------------!
[4246]	499	! Description:
	500	! ------------
[4646]	501	!< Calculation of the air temperatures and mean radiation temperature.
	502	!< This is basis for the operative temperature.
	503	!< Based on a Crank-Nicholson scheme with a timestep of a hour.
	504	!--------------------------------------------------------------------------------------------------!
[4702]	505	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	506	near_facade_temperature, phi_hc_nd_dummy, theta_m_t_prev )
[4402]	507
[4246]	508	INTEGER(iwp) :: i
	509	INTEGER(iwp) :: j
	510	INTEGER(iwp) :: k
[4646]	511
[4701]	512	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
[4246]	513	REAL(wp) :: near_facade_temperature
	514	REAL(wp) :: phi_hc_nd_dummy
[4687]	515	REAL(wp), INTENT(IN) :: theta_m_t_prev
[4246]	516	!
	517	!-- Calculation of total mass specific thermal load (internal and external)
[4701]	518	phi_mtot = ( phi_m + h_t_wm * indoor_wall_temperature &
[4646]	519	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
	520	+ h_t_1 * &
	521	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	522	+ near_facade_temperature ) &
	523	) / h_t_2 &
[4246]	524	) !< [degree_C] Eq. (C.5)
[4646]	525	!
[4687]	526	!-- Calculation of component temperature at current timestep
[4646]	527	theta_m_t = ( ( theta_m_t_prev &
	528	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
	529	+ phi_mtot &
	530	) &
	531	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
[4246]	532	) !< [degree_C] Eq. (C.4)
	533	!
[4687]	534	!-- Calculation of mean inner temperature for the RC-node in current timestep
[4246]	535	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
[4646]	536
[4246]	537	!
[4687]	538	!-- Calculation of mean surface temperature of the RC-node in current timestep
[4646]	539	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
	540	+ h_t_1 * ( near_facade_temperature &
	541	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	542	) &
	543	/ ( h_t_ms + h_t_es + h_t_1 ) &
[4246]	544	) !< [degree_C] Eq. (C.10)
[4646]	545
[4246]	546	!
	547	!-- Calculation of the air temperature of the RC-node
[4687]	548
	549
[4646]	550	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature + phi_ia + phi_hc_nd_dummy ) / &
	551	( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
[4246]	552
[4687]	553
[4246]	554	END SUBROUTINE im_calc_temperatures
	555
[4646]	556
	557	!--------------------------------------------------------------------------------------------------!
[4246]	558	! Description:
	559	! ------------
	560	!> Initialization of the indoor model.
[4646]	561	!> Static information are calculated here, e.g. building parameters and geometrical information,
	562	!> anything that doesn't change in time.
[4246]	563	!
	564	!-- Input values
	565	!-- Input datas from Palm, M4
	566	! i_global --> net_sw_in !< global radiation [W/m2]
	567	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
	568	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
[4646]	569	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from
	570	!< 1. Palm volume
[4246]	571	! theta_node --> t_wall_h(nzt_wall,m)
	572	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
[4646]	573	!--------------------------------------------------------------------------------------------------!
[4246]	574	SUBROUTINE im_init
	575
[4646]	576	USE control_parameters, &
[4267]	577	ONLY: message_string, time_since_reference_point
[4246]	578
[4646]	579	USE indices, &
[4346]	580	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
[4246]	581
[4646]	582	USE grid_variables, &
[4246]	583	ONLY: dx, dy
	584
	585	USE pegrid
	586
[4646]	587	USE surface_mod, &
[4246]	588	ONLY: surf_usm_h, surf_usm_v
[4646]	589
	590	USE urban_surface_mod, &
[4246]	591	ONLY: building_pars, building_type
	592
[4267]	593	INTEGER(iwp) :: bt !< local building type
	594	INTEGER(iwp) :: day_of_year !< day of the year
[4850]	595	INTEGER(iwp) :: fa !< running index for facade elements of each building
[4267]	596	INTEGER(iwp) :: i !< running index along x-direction
	597	INTEGER(iwp) :: j !< running index along y-direction
	598	INTEGER(iwp) :: k !< running index along z-direction
	599	INTEGER(iwp) :: l !< running index for surface-element orientation
	600	INTEGER(iwp) :: m !< running index surface elements
	601	INTEGER(iwp) :: n !< building index
	602	INTEGER(iwp) :: nb !< building index
[4246]	603
	604	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
[4646]	605	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
	606	!< multiple occurences are sorted out
[4246]	607	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	608	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	609	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	610	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
	611	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
	612	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
	613	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
[4646]	614	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
[4246]	615	!< horizontal facade elements
[4646]	616	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
[4246]	617	!< vertical facade elements
[4646]	618	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
	619	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
	620
[4246]	621	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	622	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
[4646]	623
[4246]	624	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
	625	REAL(wp) :: du_tmp !< 1/u_tmp
	626	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
	627	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
	628
	629	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
	630	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
	631	!< on local subdomain
	632
	633	CALL location_message( 'initializing indoor model', 'start' )
	634	!
[4646]	635	!-- Initializing of indoor model is only possible if buildings can be distinguished by their IDs.
[4246]	636	IF ( .NOT. building_id_f%from_file ) THEN
	637	message_string = 'Indoor model requires information about building_id'
	638	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
	639	ENDIF
	640	!
	641	!-- Determine number of different building IDs on local subdomain.
	642	num_buildings_l = 0
	643	num_buildings = 0
	644	ALLOCATE( build_ids_l(1) )
	645	DO i = nxl, nxr
	646	DO j = nys, nyn
	647	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	648	IF ( num_buildings_l(myid) > 0 ) THEN
[4646]	649	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
[4246]	650	CYCLE
	651	ELSE
	652	num_buildings_l(myid) = num_buildings_l(myid) + 1
	653	!
	654	!-- Resize array with different local building ids
	655	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	656	build_ids_l_tmp = build_ids_l
	657	DEALLOCATE( build_ids_l )
	658	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
[4646]	659	build_ids_l(1:num_buildings_l(myid)-1) = &
	660	build_ids_l_tmp(1:num_buildings_l(myid)-1)
[4246]	661	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	662	DEALLOCATE( build_ids_l_tmp )
	663	ENDIF
	664	!
[4646]	665	!-- First occuring building id on PE
	666	ELSE
[4246]	667	num_buildings_l(myid) = num_buildings_l(myid) + 1
	668	build_ids_l(1) = building_id_f%var(j,i)
	669	ENDIF
	670	ENDIF
	671	ENDDO
	672	ENDDO
	673	!
[4646]	674	!-- Determine number of building IDs for the entire domain. (Note, building IDs can appear multiple
	675	!-- times as buildings might be distributed over several PEs.)
	676	#if defined( __parallel )
	677	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, comm2d, &
	678	ierr )
[4246]	679	#else
	680	num_buildings = num_buildings_l
	681	#endif
	682	ALLOCATE( build_ids(1:SUM(num_buildings)) )
	683	!
[4646]	684	!-- Gather building IDs. Therefore, first, determine displacements used required for MPI_GATHERV
	685	!-- call.
[4246]	686	ALLOCATE( displace_dum(0:numprocs-1) )
	687	displace_dum(0) = 0
	688	DO i = 1, numprocs-1
	689	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	690	ENDDO
	691
[4646]	692	#if defined( __parallel )
	693	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
	694	num_buildings(myid), &
	695	MPI_INTEGER, &
	696	build_ids, &
	697	num_buildings, &
	698	displace_dum, &
	699	MPI_INTEGER, &
	700	comm2d, ierr )
[4246]	701
	702	DEALLOCATE( displace_dum )
	703
	704	#else
	705	build_ids = build_ids_l
	706	#endif
	707	!
[4646]	708	!-- Note: in parallel mode, building IDs can occur mutliple times, as each PE has send its own ids.
	709	!-- Therefore, sort out building IDs which appear multiple times.
[4246]	710	num_build = 0
	711	DO n = 1, SIZE(build_ids)
	712
	713	IF ( ALLOCATED(build_ids_final) ) THEN
	714	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
	715	CYCLE
	716	ELSE
	717	num_build = num_build + 1
	718	!
	719	!-- Resize
	720	ALLOCATE( build_ids_final_tmp(1:num_build) )
	721	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	722	DEALLOCATE( build_ids_final )
	723	ALLOCATE( build_ids_final(1:num_build) )
	724	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	725	build_ids_final(num_build) = build_ids(n)
	726	DEALLOCATE( build_ids_final_tmp )
[4646]	727	ENDIF
[4246]	728	ELSE
	729	num_build = num_build + 1
	730	ALLOCATE( build_ids_final(1:num_build) )
	731	build_ids_final(num_build) = build_ids(n)
	732	ENDIF
	733	ENDDO
	734
	735	!
[4646]	736	!-- Allocate building-data structure array. Note, this is a global array and all building IDs on
	737	!-- domain are known by each PE. Further attributes, e.g. height-dependent arrays, however, are only
	738	!-- allocated on PEs where the respective building is present (in order to reduce memory demands).
[4246]	739	ALLOCATE( buildings(1:num_build) )
	740
	741	!
[4646]	742	!-- Store building IDs and check if building with certain ID is present on subdomain.
[4246]	743	DO nb = 1, num_build
	744	buildings(nb)%id = build_ids_final(nb)
	745
[4646]	746	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
[4246]	747	buildings(nb)%on_pe = .TRUE.
[4646]	748	ENDDO
[4246]	749	!
[4646]	750	!-- Determine the maximum vertical dimension occupied by each building.
[4246]	751	ALLOCATE( k_min_l(1:num_build) )
	752	ALLOCATE( k_max_l(1:num_build) )
	753	k_min_l = nzt + 1
[4646]	754	k_max_l = 0
[4246]	755
	756	DO i = nxl, nxr
	757	DO j = nys, nyn
	758	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	759	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	760	DO k = nzb, nzt+1
	761	!
[4646]	762	!-- Check if grid point belongs to a building.
[4346]	763	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
[4246]	764	k_min_l(nb) = MIN( k_min_l(nb), k )
	765	k_max_l(nb) = MAX( k_max_l(nb), k )
	766	ENDIF
	767
	768	ENDDO
	769	ENDIF
	770	ENDDO
	771	ENDDO
	772
[4646]	773	#if defined( __parallel )
	774	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, MPI_INTEGER, MPI_MIN, comm2d, &
	775	ierr )
	776	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, MPI_INTEGER, MPI_MAX, comm2d, &
	777	ierr )
[4246]	778	#else
	779	buildings(:)%kb_min = k_min_l(:)
	780	buildings(:)%kb_max = k_max_l(:)
	781	#endif
	782
	783	DEALLOCATE( k_min_l )
	784	DEALLOCATE( k_max_l )
	785	!
	786	!-- Calculate building height.
	787	DO nb = 1, num_build
	788	buildings(nb)%building_height = 0.0_wp
	789	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	790	buildings(nb)%building_height = buildings(nb)%building_height + dzw(k+1)
[4246]	791	ENDDO
	792	ENDDO
	793	!
	794	!-- Calculate building volume
	795	DO nb = 1, num_build
	796	!
	797	!-- Allocate temporary array for summing-up building volume
	798	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	799	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	800	volume = 0.0_wp
	801	volume_l = 0.0_wp
	802	!
[4646]	803	!-- Calculate building volume per height level on each PE where these building is present.
[4246]	804	IF ( buildings(nb)%on_pe ) THEN
	805
	806	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	807	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	808	buildings(nb)%volume = 0.0_wp
	809	buildings(nb)%vol_frac = 0.0_wp
[4646]	810
	811	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) THEN
[4246]	812	DO i = nxl, nxr
	813	DO j = nys, nyn
	814	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	815	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
[4246]	816	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
	817	ENDDO
	818	ENDDO
	819	ENDDO
	820	ENDIF
	821	ENDIF
	822	!
	823	!-- Sum-up building volume from all subdomains
[4646]	824	#if defined( __parallel )
	825	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, comm2d, ierr )
[4246]	826	#else
	827	volume = volume_l
	828	#endif
	829	!
[4646]	830	!-- Save total building volume as well as local fraction on volume on building data structure.
[4246]	831	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
	832	!
	833	!-- Determine fraction of local on total building volume
	834	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
	835	!
	836	!-- Calculate total building volume
[4646]	837	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
[4246]	838
	839	DEALLOCATE( volume )
	840	DEALLOCATE( volume_l )
	841
	842	ENDDO
	843	!
[4646]	844	!-- Allocate arrays for indoor temperature.
[4246]	845	DO nb = 1, num_build
	846	IF ( buildings(nb)%on_pe ) THEN
	847	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	848	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	849	buildings(nb)%t_in = 0.0_wp
	850	buildings(nb)%t_in_l = 0.0_wp
	851	ENDIF
	852	ENDDO
	853	!
[4646]	854	!-- Allocate arrays for number of facades per height level. Distinguish between horizontal and
	855	!-- vertical facades.
[4246]	856	DO nb = 1, num_build
	857	IF ( buildings(nb)%on_pe ) THEN
	858	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	859	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	860
	861	buildings(nb)%num_facade_h = 0
	862	buildings(nb)%num_facade_v = 0
	863	ENDIF
	864	ENDDO
	865	!
	866	!-- Determine number of facade elements per building on local subdomain.
	867	!-- Distinguish between horizontal and vertical facade elements.
	868	!
	869	!-- Horizontal facades
	870	buildings(:)%num_facades_per_building_h_l = 0
[4671]	871	DO l = 0, 1
	872	DO m = 1, surf_usm_h(l)%ns
[4246]	873	!
[4671]	874	!-- For the current facade element determine corresponding building index.
	875	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	876	!-- element and building location (for horizontal surface elements the horizontal offsets are
	877	!-- zero).
	878	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	879	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
	880	k = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4246]	881	!
[4671]	882	!-- Determine building index and check whether building is on PE.
	883	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	884
[4671]	885	IF ( buildings(nb)%on_pe ) THEN
[4246]	886	!
[4671]	887	!-- Count number of facade elements at each height level.
	888	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
[4246]	889	!
[4671]	890	!-- Moreover, sum up number of local facade elements per building.
	891	buildings(nb)%num_facades_per_building_h_l = &
[4646]	892	buildings(nb)%num_facades_per_building_h_l + 1
[4671]	893	ENDIF
	894	ENDDO
[4246]	895	ENDDO
	896	!
	897	!-- Vertical facades
	898	buildings(:)%num_facades_per_building_v_l = 0
	899	DO l = 0, 3
	900	DO m = 1, surf_usm_v(l)%ns
	901	!
	902	!-- For the current facade element determine corresponding building index.
[4646]	903	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	904	!-- element and building location (for vertical surface elements the vertical offsets are
	905	!-- zero).
[4246]	906	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	907	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	908	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	909
[4646]	910	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	911	IF ( buildings(nb)%on_pe ) THEN
[4646]	912	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
	913	buildings(nb)%num_facades_per_building_v_l = &
	914	buildings(nb)%num_facades_per_building_v_l + 1
[4246]	915	ENDIF
	916	ENDDO
	917	ENDDO
	918	!
[4646]	919	!-- Determine total number of facade elements per building and assign number to building data type.
[4246]	920	DO nb = 1, num_build
	921	!
[4646]	922	!-- Allocate dummy array used for summing-up facade elements.
	923	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	924	!-- allocated on all PEs.
[4246]	925	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	926	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	927	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	928	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	929	num_facades_h = 0
	930	num_facades_v = 0
	931	receive_dum_h = 0
	932	receive_dum_v = 0
	933
	934	IF ( buildings(nb)%on_pe ) THEN
	935	num_facades_h = buildings(nb)%num_facade_h
	936	num_facades_v = buildings(nb)%num_facade_v
	937	ENDIF
	938
[4646]	939	#if defined( __parallel )
	940	CALL MPI_ALLREDUCE( num_facades_h, &
	941	receive_dum_h, &
	942	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	943	MPI_INTEGER, &
	944	MPI_SUM, &
	945	comm2d, &
[4246]	946	ierr )
	947
[4646]	948	CALL MPI_ALLREDUCE( num_facades_v, &
	949	receive_dum_v, &
	950	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	951	MPI_INTEGER, &
	952	MPI_SUM, &
	953	comm2d, &
[4246]	954	ierr )
[4646]	955	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) buildings(nb)%num_facade_h = receive_dum_h
	956	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) buildings(nb)%num_facade_v = receive_dum_v
[4246]	957	#else
	958	buildings(nb)%num_facade_h = num_facades_h
	959	buildings(nb)%num_facade_v = num_facades_v
	960	#endif
	961
	962	!
	963	!-- Deallocate dummy arrays
	964	DEALLOCATE( num_facades_h )
	965	DEALLOCATE( num_facades_v )
	966	DEALLOCATE( receive_dum_h )
	967	DEALLOCATE( receive_dum_v )
	968	!
	969	!-- Allocate index arrays which link facade elements with surface-data type.
[4646]	970	!-- Please note, no height levels are considered here (information is stored in surface-data type
	971	!-- itself).
[4246]	972	IF ( buildings(nb)%on_pe ) THEN
	973	!
	974	!-- Determine number of facade elements per building.
	975	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
	976	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
	977	!
[4646]	978	!-- Allocate arrays which link the building with the horizontal and vertical urban-type
	979	!-- surfaces. Please note, linking arrays are allocated over all facade elements, which is
	980	!-- required in case a building is located at the subdomain boundaries, where the building and
	981	!-- the corresponding surface elements are located on different subdomains.
[4681]	982	ALLOCATE( buildings(nb)%l_h(1:buildings(nb)%num_facades_per_building_h_l) )
[4246]	983	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
	984
	985	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
	986	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
[4687]	987
	988	ALLOCATE( buildings(nb)%theta_m_t_prev_h(1:buildings(nb)%num_facades_per_building_h_l) )
	989	ALLOCATE( buildings(nb)%theta_m_t_prev_v(1:buildings(nb)%num_facades_per_building_v_l) )
[4246]	990	ENDIF
[4402]	991
[4246]	992	IF ( buildings(nb)%on_pe ) THEN
	993	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	994	buildings(nb)%vpf = 0.0_wp
[4402]	995
[4646]	996	facade_area_v = 0.0_wp
[4246]	997	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	998	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) * dzw(k+1) * dx
[4246]	999	ENDDO
[4402]	1000	!
[4646]	1001	!-- Determine volume per total facade area (vpf). For the horizontal facade area
	1002	!-- num_facades_per_building_h can be taken, multiplied with dx*dy.
	1003	!-- However, due to grid stretching, vertical facade elements must be summed-up vertically.
	1004	!-- Please note, if dx /= dy, an error is made!
	1005	buildings(nb)%vpf = buildings(nb)%vol_tot / &
	1006	( buildings(nb)%num_facades_per_building_h * dx * dy + facade_area_v )
[4402]	1007	!
	1008	!-- Determine floor-area-per-facade.
[4646]	1009	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h * dx * dy &
	1010	/ ( buildings(nb)%num_facades_per_building_h * dx * dy &
	1011	+ facade_area_v )
[4246]	1012	ENDIF
	1013	ENDDO
	1014	!
[4646]	1015	!-- Link facade elements with surface data type.
[4246]	1016	!-- Allocate array for counting.
	1017	ALLOCATE( n_fa(1:num_build) )
	1018	n_fa = 1
	1019
[4671]	1020	DO l = 0, 1
	1021	DO m = 1, surf_usm_h(l)%ns
	1022	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	1023	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
[4246]	1024
[4671]	1025	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1026
[4671]	1027	IF ( buildings(nb)%on_pe ) THEN
[4681]	1028	buildings(nb)%l_h(n_fa(nb)) = l
[4671]	1029	buildings(nb)%m_h(n_fa(nb)) = m
	1030	n_fa(nb) = n_fa(nb) + 1
	1031	ENDIF
	1032	ENDDO
[4246]	1033	ENDDO
	1034
	1035	n_fa = 1
	1036	DO l = 0, 3
	1037	DO m = 1, surf_usm_v(l)%ns
	1038	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	1039	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	1040
[4646]	1041	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1042
	1043	IF ( buildings(nb)%on_pe ) THEN
	1044	buildings(nb)%l_v(n_fa(nb)) = l
	1045	buildings(nb)%m_v(n_fa(nb)) = m
[4646]	1046	n_fa(nb) = n_fa(nb) + 1
[4246]	1047	ENDIF
	1048	ENDDO
	1049	ENDDO
	1050	DEALLOCATE( n_fa )
	1051	!
[4646]	1052	!-- Initialize building parameters, first by mean building type. Note, in this case all buildings
	1053	!-- have the same type.
	1054	!-- In a second step initialize with building tpyes from static input file, where building types can
	1055	!-- be individual for each building.
[4267]	1056	buildings(:)%lambda_layer3 = building_pars(31,building_type)
	1057	buildings(:)%s_layer3 = building_pars(44,building_type)
[4246]	1058	buildings(:)%f_c_win = building_pars(119,building_type)
[4646]	1059	buildings(:)%g_value_win = building_pars(120,building_type)
	1060	buildings(:)%u_value_win = building_pars(121,building_type)
	1061	buildings(:)%eta_ve = building_pars(124,building_type)
	1062	buildings(:)%factor_a = building_pars(125,building_type)
[4246]	1063	buildings(:)%factor_c = building_pars(126,building_type)
[4646]	1064	buildings(:)%lambda_at = building_pars(127,building_type)
	1065	buildings(:)%theta_int_h_set = building_pars(13,building_type)
[4267]	1066	buildings(:)%theta_int_c_set = building_pars(12,building_type)
[4646]	1067	buildings(:)%q_h_max = building_pars(128,building_type)
	1068	buildings(:)%q_c_max = building_pars(129,building_type)
[4246]	1069	buildings(:)%qint_high = building_pars(130,building_type)
	1070	buildings(:)%qint_low = building_pars(131,building_type)
	1071	buildings(:)%height_storey = building_pars(132,building_type)
	1072	buildings(:)%height_cei_con = building_pars(133,building_type)
	1073	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
	1074	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
	1075	!
[4267]	1076	!-- Initialize seasonal dependent parameters, depending on day of the year.
[4646]	1077	!-- First, calculated day of the year.
[4267]	1078	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
	1079	!
[4646]	1080	!-- Summer is defined in between northward- and southward equinox.
	1081	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1082	buildings(:)%air_change_low = summer_pars(0,building_type)
[4267]	1083	buildings(:)%air_change_high = summer_pars(1,building_type)
	1084	ELSE
[4646]	1085	buildings(:)%air_change_low = winter_pars(0,building_type)
[4267]	1086	buildings(:)%air_change_high = winter_pars(1,building_type)
	1087	ENDIF
	1088	!
[4646]	1089	!-- Initialize ventilation load. Please note, building types > 7 are actually not allowed (check
	1090	!-- already in urban_surface_mod and netcdf_data_input_mod.
	1091	!-- However, the building data base may be later extended.
	1092	IF ( building_type == 1 .OR. building_type == 2 .OR. &
	1093	building_type == 3 .OR. building_type == 10 .OR. &
[4246]	1094	building_type == 11 .OR. building_type == 12 ) THEN
	1095	buildings(:)%ventilation_int_loads = 1
	1096	!
	1097	!-- Office, building with large windows
[4646]	1098	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
	1099	building_type == 6 .OR. building_type == 7 .OR. &
[4246]	1100	building_type == 8 .OR. building_type == 9) THEN
	1101	buildings(:)%ventilation_int_loads = 2
	1102	!
	1103	!-- Industry, hospitals
[4646]	1104	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
	1105	building_type == 15 .OR. building_type == 16 .OR. &
[4246]	1106	building_type == 17 .OR. building_type == 18 ) THEN
	1107	buildings(:)%ventilation_int_loads = 3
	1108	ENDIF
	1109	!
	1110	!-- Initialization of building parameters - level 2
	1111	IF ( building_type_f%from_file ) THEN
	1112	DO i = nxl, nxr
	1113	DO j = nys, nyn
	1114	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	1115	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1116	bt = building_type_f%var(j,i)
[4646]	1117
[4267]	1118	buildings(nb)%lambda_layer3 = building_pars(31,bt)
	1119	buildings(nb)%s_layer3 = building_pars(44,bt)
[4246]	1120	buildings(nb)%f_c_win = building_pars(119,bt)
[4646]	1121	buildings(nb)%g_value_win = building_pars(120,bt)
	1122	buildings(nb)%u_value_win = building_pars(121,bt)
	1123	buildings(nb)%eta_ve = building_pars(124,bt)
	1124	buildings(nb)%factor_a = building_pars(125,bt)
[4246]	1125	buildings(nb)%factor_c = building_pars(126,bt)
[4646]	1126	buildings(nb)%lambda_at = building_pars(127,bt)
	1127	buildings(nb)%theta_int_h_set = building_pars(13,bt)
[4267]	1128	buildings(nb)%theta_int_c_set = building_pars(12,bt)
[4646]	1129	buildings(nb)%q_h_max = building_pars(128,bt)
	1130	buildings(nb)%q_c_max = building_pars(129,bt)
[4246]	1131	buildings(nb)%qint_high = building_pars(130,bt)
	1132	buildings(nb)%qint_low = building_pars(131,bt)
	1133	buildings(nb)%height_storey = building_pars(132,bt)
[4646]	1134	buildings(nb)%height_cei_con = building_pars(133,bt)
[4246]	1135	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
	1136	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
[4267]	1137
[4646]	1138	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1139	buildings(nb)%air_change_low = summer_pars(0,bt)
[4267]	1140	buildings(nb)%air_change_high = summer_pars(1,bt)
	1141	ELSE
[4646]	1142	buildings(nb)%air_change_low = winter_pars(0,bt)
[4267]	1143	buildings(nb)%air_change_high = winter_pars(1,bt)
	1144	ENDIF
	1145
[4246]	1146	!
[4646]	1147	!-- Initialize ventilaation load. Please note, building types > 7
	1148	!-- are actually not allowed (check already in urban_surface_mod
	1149	!-- and netcdf_data_input_mod. However, the building data base may
	1150	!-- be later extended.
	1151	IF ( bt == 1 .OR. bt == 2 .OR. &
	1152	bt == 3 .OR. bt == 10 .OR. &
[4246]	1153	bt == 11 .OR. bt == 12 ) THEN
	1154	buildings(nb)%ventilation_int_loads = 1
[4646]	1155	!
[4246]	1156	!-- Office, building with large windows
[4646]	1157	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
	1158	bt == 6 .OR. bt == 7 .OR. &
[4246]	1159	bt == 8 .OR. bt == 9) THEN
	1160	buildings(nb)%ventilation_int_loads = 2
	1161	!
	1162	!-- Industry, hospitals
[4646]	1163	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
	1164	bt == 15 .OR. bt == 16 .OR. &
[4246]	1165	bt == 17 .OR. bt == 18 ) THEN
	1166	buildings(nb)%ventilation_int_loads = 3
	1167	ENDIF
	1168	ENDIF
	1169	ENDDO
	1170	ENDDO
	1171	ENDIF
	1172	!
[4646]	1173	!-- Calculation of surface-related heat transfer coeffiecient out of standard u-values from building
	1174	!-- database.
	1175	!-- Only amount of extern and surface is used.
	1176	!-- Otherwise amount between air and surface taken account twice.
[4246]	1177	DO nb = 1, num_build
[4646]	1178	IF ( buildings(nb)%on_pe ) THEN
[4246]	1179	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
[4646]	1180	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
[4246]	1181	0.125_wp + ( 1.0_wp / h_is ) ) )
[4646]	1182
[4246]	1183	du_tmp = 1.0_wp / u_tmp
[4646]	1184
[4267]	1185	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
	1186
[4246]	1187	ENDIF
	1188	ENDDO
	1189	!
	1190	!-- Initialize indoor temperature. Actually only for output at initial state.
[4850]	1191	IF ( TRIM( initializing_actions ) /= 'read_restart_data' ) THEN
	1192	DO nb = 1, num_build
	1193	IF ( buildings(nb)%on_pe ) THEN
	1194	buildings(nb)%t_in(:) = initial_indoor_temperature
[4687]	1195
	1196	!
[4850]	1197	!-- (after first loop, use theta_m_t as theta_m_t_prev)
	1198	buildings(nb)%theta_m_t_prev_h(:) = initial_indoor_temperature
	1199	buildings(nb)%theta_m_t_prev_v(:) = initial_indoor_temperature
[4687]	1200
[4850]	1201	ENDIF
	1202	ENDDO
	1203	!
	1204	!-- Initialize indoor temperature at previous timestep.
	1205	ELSE
	1206	DO nb = 1, num_build
	1207	IF ( buildings(nb)%on_pe ) THEN
	1208	!
	1209	!-- Mean indoor temperature can be initialized with initial value. This is just
	1210	!-- used for output.
	1211	buildings(nb)%t_in(:) = initial_indoor_temperature
	1212	!
	1213	!-- Initialize theta_m_t_prev arrays. The respective data during the restart mechanism
	1214	!-- is stored on the surface-data array.
	1215	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1216	!
	1217	!-- Determine indices where corresponding surface-type information is stored.
	1218	l = buildings(nb)%l_h(fa)
	1219	m = buildings(nb)%m_h(fa)
	1220	buildings(nb)%theta_m_t_prev_h(fa) = surf_usm_h(l)%t_prev(m)
	1221	ENDDO
	1222	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1223	!
	1224	!-- Determine indices where corresponding surface-type information is stored.
	1225	l = buildings(nb)%l_v(fa)
	1226	m = buildings(nb)%m_v(fa)
	1227	buildings(nb)%theta_m_t_prev_v(fa) = surf_usm_v(l)%t_prev(m)
	1228	ENDDO
	1229	ENDIF
	1230	ENDDO
	1231	ENDIF
[4246]	1232
	1233	CALL location_message( 'initializing indoor model', 'finished' )
	1234
	1235	END SUBROUTINE im_init
	1236
	1237
[4646]	1238	!--------------------------------------------------------------------------------------------------!
[4246]	1239	! Description:
	1240	! ------------
	1241	!> Main part of the indoor model.
	1242	!> Calculation of .... (kanani: Please describe)
[4646]	1243	!--------------------------------------------------------------------------------------------------!
[4246]	1244	SUBROUTINE im_main_heatcool
	1245
	1246	! USE basic_constants_and_equations_mod, &
	1247	! ONLY: c_p
	1248
[4646]	1249	USE control_parameters, &
[4246]	1250	ONLY: time_since_reference_point
	1251
[4646]	1252	USE grid_variables, &
[4246]	1253	ONLY: dx, dy
	1254
	1255	USE pegrid
[4646]	1256
	1257	USE surface_mod, &
[4750]	1258	ONLY: ind_pav_green, &
	1259	ind_veg_wall, &
	1260	ind_wat_win, &
	1261	surf_usm_h, &
	1262	surf_usm_v
[4246]	1263
[4646]	1264	USE urban_surface_mod, &
[4750]	1265	ONLY: building_type, &
	1266	nzt_wall, &
	1267	t_green_h, &
	1268	t_green_v, &
	1269	t_wall_h, &
	1270	t_wall_v, &
	1271	t_window_h, &
	1272	t_window_v
[4246]	1273
[4646]	1274
	1275	INTEGER(iwp) :: fa !< running index for facade elements of each building
[4246]	1276	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
	1277	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
	1278	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
	1279	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
	1280	INTEGER(iwp) :: l !< running index for surface-element orientation
	1281	INTEGER(iwp) :: m !< running index surface elements
	1282	INTEGER(iwp) :: nb !< running index for buildings
	1283
[4750]	1284	LOGICAL :: during_spinup !< flag indicating that the simulation is still in wall/soil spinup
	1285
	1286	REAL(wp) :: frac_green !< dummy for green fraction
	1287	REAL(wp) :: frac_wall !< dummy for wall fraction
	1288	REAL(wp) :: frac_win !< dummy for window fraction
	1289	! REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	1290	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
[4246]	1291	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
	1292	REAL(wp) :: second_of_day !< second of the current day
	1293	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
	1294
	1295	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
	1296	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
	1297	!
[4646]	1298	!-- Determine time of day in hours.
[4246]	1299	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
	1300	time_utc_hour = second_of_day / seconds_per_hour
	1301	!
[4750]	1302	!-- Check if the simulation is still in wall/soil spinup mode
	1303	during_spinup = MERGE( .TRUE., .FALSE., time_since_reference_point < 0.0_wp )
	1304	!
[4246]	1305	!-- Following calculations must be done for each facade element.
	1306	DO nb = 1, num_build
	1307	!
[4646]	1308	!-- First, check whether building is present on local subdomain.
[4246]	1309	IF ( buildings(nb)%on_pe ) THEN
	1310	!
	1311	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
[4646]	1312	!-- Residental Building, panel WBS 70
[4246]	1313	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
[4267]	1314	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1315	schedule_d = 0
	1316	ELSE
[4246]	1317	schedule_d = 1
	1318	ENDIF
	1319	ENDIF
	1320	!
	1321	!-- Office, building with large windows
	1322	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
	1323	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1324	schedule_d = 1
	1325	ELSE
	1326	schedule_d = 0
	1327	ENDIF
	1328	ENDIF
[4646]	1329	!
[4246]	1330	!-- Industry, hospitals
	1331	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
	1332	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
	1333	schedule_d = 1
	1334	ELSE
	1335	schedule_d = 0
	1336	ENDIF
	1337	ENDIF
	1338	!
[4850]	1339	!-- Initialize/reset indoor temperature - note, this is only for output
[4646]	1340	buildings(nb)%t_in_l = 0.0_wp
[4246]	1341	!
	1342	!-- Horizontal surfaces
	1343	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1344	!
[4671]	1345	!-- Determine indices where corresponding surface-type information is stored.
[4681]	1346	l = buildings(nb)%l_h(fa)
	1347	m = buildings(nb)%m_h(fa)
[4246]	1348	!
[4750]	1349	!-- During spinup set window fraction to zero and add these to wall fraction.
	1350	frac_win = MERGE( surf_usm_h(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
	1351	frac_wall = MERGE( surf_usm_h(l)%frac(m,ind_veg_wall), &
	1352	surf_usm_h(l)%frac(m,ind_veg_wall) + &
	1353	surf_usm_h(l)%frac(m,ind_wat_win), &
	1354	.NOT. during_spinup )
	1355	frac_green = surf_usm_h(l)%frac(m,ind_pav_green)
	1356	!
[4646]	1357	!-- Determine building height level index.
[4671]	1358	kk = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4402]	1359	!
[4246]	1360	!-- Building geometries --> not time-dependent
[4646]	1361	facade_element_area = dx * dy !< [m2] surface area per facade element
[4402]	1362	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1363	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1364	buildings(nb)%area_facade = facade_element_area * &
	1365	( buildings(nb)%num_facades_per_building_h + &
[4750]	1366	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
	1367	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
[4246]	1368
	1369	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1370	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1371	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1372	a_m = buildings(nb)%factor_a * total_area * &
	1373	( facade_element_area / buildings(nb)%area_facade ) * &
	1374	buildings(nb)%lambda_at !< [m2] standard values
	1375	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1376	c_m = buildings(nb)%factor_c * total_area * &
	1377	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1378	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1379	!
	1380	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1381	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1382
[4646]	1383	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1384	!< (m2 K) between surface and air, Eq. (9)
	1385	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1386	!< (m2 K) between component and surface, Eq. (64)
	1387	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1388	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1389	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
[4646]	1390	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63),
	1391	!< Section 12.2.2
[4246]	1392	!
[4646]	1393	!-- Internal air loads dependent on the occupacy of the room.
	1394	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int).
	1395	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1396	* floor_area_per_facade )
[4246]	1397	q_int = phi_ia / total_area
	1398	!
[4646]	1399	!-- Airflow dependent on the occupacy of the room.
	1400	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1401	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
[4246]	1402	!
[4646]	1403	!-- Heat transfer of ventilation.
	1404	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1405	!-- capacity of air 0.33 Wh/m2K.
	1406	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1407	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
[4246]	1408
	1409	!-- Heat transfer coefficient auxiliary variables
	1410	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1411	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1412	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1413	!
	1414	!-- Net short-wave radiation through window area (was i_global)
[4671]	1415	net_sw_in = surf_usm_h(l)%rad_sw_in(m) - surf_usm_h(l)%rad_sw_out(m)
[4246]	1416	!
	1417	!-- Quantities needed for im_calc_temperatures
[4671]	1418	i = surf_usm_h(l)%i(m)
	1419	j = surf_usm_h(l)%j(m)
	1420	k = surf_usm_h(l)%k(m)
	1421	near_facade_temperature = surf_usm_h(l)%pt_10cm(m)
[4750]	1422	! indoor_wall_window_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
	1423	! + frac_win * t_window_h(l)%val(nzt_wall,m) &
	1424	! + frac_green * t_green_h(l)%val(nzt_wall,m)
	1425	indoor_wall_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
	1426	+ frac_win * t_window_h(l)%val(nzt_wall,m) &
	1427	+ frac_green * t_green_h(l)%val(nzt_wall,m)
[4246]	1428	!
[4646]	1429	!-- Solar thermal gains. If net_sw_in larger than sun-protection threshold parameter
	1430	!-- (params_solar_protection), sun protection will be activated.
	1431	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1432	solar_protection_off = 1
	1433	solar_protection_on = 0
[4646]	1434	ELSE
[4246]	1435	solar_protection_off = 0
	1436	solar_protection_on = 1
	1437	ENDIF
	1438	!
[4646]	1439	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1440	!-- automatic sun protection.
[4246]	1441	!-- DIN 4108 - 2 chap.8
[4646]	1442	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1443	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1444	solar_protection_on ) &
[4246]	1445	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
[4646]	1446	q_sol = phi_sol
[4246]	1447	!
[4646]	1448	!-- Calculation of the mass specific thermal load for internal and external heatsources of
	1449	!-- the inner node.
	1450	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with
	1451	!< phi_ia=0,5*phi_int
[4246]	1452	q_c_m = phi_m
	1453	!
[4646]	1454	!-- Calculation mass specific thermal load implied non thermal mass
	1455	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1456	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1457	!< phi_ia=0,5*phi_int
	1458	q_c_st = phi_st
[4246]	1459	!
	1460	!-- Calculations for deriving indoor temperature and heat flux into the wall
[4646]	1461	!-- Step 1: indoor temperature without heating and cooling
[4246]	1462	!-- section C.4.1 Picture C.2 zone 3)
	1463	phi_hc_nd = 0.0_wp
[4646]	1464
[4702]	1465	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1466	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1467	!
[4646]	1468	!-- If air temperature between border temperatures of heating and cooling, assign output
	1469	!-- variable, then ready.
	1470	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1471	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1472	phi_hc_nd_ac = 0.0_wp
[4646]	1473	phi_hc_nd = phi_hc_nd_ac
[4246]	1474	theta_air_ac = theta_air
	1475	!
	1476	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1477	!-- again.
	1478	ELSE
	1479	!
	1480	!-- Temperature not correct, calculation method according to section C4.2
[4646]	1481	theta_air_0 = theta_air !< temperature without heating/cooling
[4246]	1482	!
	1483	!-- Heating or cooling?
	1484	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1485	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1486	ELSE
	1487	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1488	ENDIF
	1489	!
[4646]	1490	!-- Calculate the temperature with phi_hc_nd_10
[4246]	1491	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1492	phi_hc_nd = phi_hc_nd_10
[4646]	1493
[4702]	1494	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1495	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1496	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
	1497	!
[4730]	1498	!-- Avoid division by zero at first timestep where the denominator can become zero.
	1499	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
	1500	phi_hc_nd_un = phi_hc_nd_10
	1501	ELSE
	1502	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
	1503	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1504	ENDIF
	1505	!
[4646]	1506	!-- Step 3: with temperature ratio to determine the heating or cooling capacity.
	1507	!-- If necessary, limit the power to maximum power.
[4246]	1508	!-- section C.4.1 Picture C.2 zone 2) and 4)
[4646]	1509	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
[4246]	1510	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1511	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1512	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1513	phi_hc_nd_ac = phi_hc_nd_un
[4646]	1514	phi_hc_nd = phi_hc_nd_un
[4246]	1515	ELSE
	1516	!
[4646]	1517	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1518	!-- (phi_hc_nd_un negative)
[4246]	1519	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1520	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1521	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1522	ELSE
[4246]	1523	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1524	ENDIF
	1525	ENDIF
[4646]	1526	phi_hc_nd = phi_hc_nd_ac
[4246]	1527	!
	1528	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4702]	1529	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1530	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1531	theta_air_ac = theta_air
	1532	ENDIF
	1533	!
	1534	!-- Update theta_m_t_prev
[4687]	1535	buildings(nb)%theta_m_t_prev_h(fa) = theta_m_t
[4646]	1536
[4687]	1537
[4246]	1538	q_vent = h_v * ( theta_air - near_facade_temperature )
	1539	!
[4646]	1540	!-- Calculate the operating temperature with weighted mean temperature of air and mean
	1541	!-- solar temperature.
	1542	!-- Will be used for thermal comfort calculations.
[4246]	1543	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
[4687]	1544
[4671]	1545	! surf_usm_h(l)%t_indoor(m) = theta_op !< not integrated now
[4246]	1546	!
[4646]	1547	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1548	!-- calculate heat transfer through wall layers towards the facade
	1549	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
[4704]	1550	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
	1551	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
[4646]	1552	/ ( facade_element_area - window_area_per_facade )
[4704]	1553	ELSE
	1554	q_wall = 0.0_wp
	1555	ENDIF
	1556
	1557	IF ( window_area_per_facade > 0.0_wp ) THEN
	1558	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
	1559	ELSE
	1560	q_win = 0.0_wp
	1561	ENDIF
[4246]	1562	!
[4701]	1563	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
	1564	surf_usm_h(l)%iwghf_eb(m) = - q_wall
	1565	surf_usm_h(l)%iwghf_eb_window(m) = - q_win
[4246]	1566	!
[4646]	1567	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1568	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1569	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1570	!
[4646]	1571	!-- Calculation of waste heat.
	1572	!-- Anthropogenic heat output.
	1573	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1574	heating_on = 1
	1575	cooling_on = 0
[4646]	1576	ELSE
[4246]	1577	heating_on = 0
	1578	cooling_on = -1
	1579	ENDIF
	1580
[4646]	1581	q_waste_heat = ( phi_hc_nd * ( &
	1582	buildings(nb)%params_waste_heat_h * heating_on + &
	1583	buildings(nb)%params_waste_heat_c * cooling_on ) &
[4850]	1584	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
	1585	!
	1586	!-- Store waste heat and previous previous indoor temperature on surface-data type.
	1587	!-- These will be used in the urban-surface model.
	1588	surf_usm_h(l)%t_prev(m) = buildings(nb)%theta_m_t_prev_h(fa)
[4709]	1589	surf_usm_h(l)%waste_heat(m) = q_waste_heat
[4246]	1590	ENDDO !< Horizontal surfaces loop
	1591	!
	1592	!-- Vertical surfaces
	1593	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1594	!
[4646]	1595	!-- Determine indices where corresponding surface-type information is stored.
[4246]	1596	l = buildings(nb)%l_v(fa)
	1597	m = buildings(nb)%m_v(fa)
[4850]	1598
[4246]	1599	!
[4750]	1600	!-- During spinup set window fraction to zero and add these to wall fraction.
	1601	frac_win = MERGE( surf_usm_v(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
	1602	frac_wall = MERGE( surf_usm_v(l)%frac(m,ind_veg_wall), &
	1603	surf_usm_v(l)%frac(m,ind_veg_wall) + &
	1604	surf_usm_v(l)%frac(m,ind_wat_win), &
	1605	.NOT. during_spinup )
	1606	frac_green = surf_usm_v(l)%frac(m,ind_pav_green)
	1607	!
[4646]	1608	!-- Determine building height level index.
[4246]	1609	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	1610	!
[4646]	1611	!-- (SOME OF THE FOLLOWING (not time-dependent) COULD PROBABLY GO INTO A FUNCTION
[4246]	1612	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
	1613	!-- Building geometries --> not time-dependent
[4402]	1614	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
	1615	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
	1616
	1617	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1618	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1619	buildings(nb)%area_facade = facade_element_area * &
	1620	( buildings(nb)%num_facades_per_building_h + &
[4750]	1621	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
	1622	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
[4246]	1623
	1624	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1625	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1626	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1627	a_m = buildings(nb)%factor_a * total_area * &
	1628	( facade_element_area / buildings(nb)%area_facade ) * &
	1629	buildings(nb)%lambda_at !< [m2] standard values
	1630	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
[4246]	1631	c_m = buildings(nb)%factor_c * total_area * &
[4646]	1632	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1633	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1634	!
	1635	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1636	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1637
[4646]	1638	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1639	!< (m2 K) between surface and air, Eq. (9)
	1640	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1641	!< (m2 K) between component and surface, Eq. (64)
	1642	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1643	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1644	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
	1645	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
	1646	!
[4646]	1647	!-- Internal air loads dependent on the occupacy of the room.
	1648	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy
	1649	!-- (qint_high) (0,5*phi_int)
	1650	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1651	* floor_area_per_facade )
[4246]	1652	q_int = phi_ia
	1653
	1654	!
[4646]	1655	!-- Airflow dependent on the occupacy of the room.
	1656	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy
	1657	!-- (air_change_high)
	1658	air_change = ( buildings(nb)%air_change_high * schedule_d + &
[4750]	1659	buildings(nb)%air_change_low )
[4246]	1660	!
[4646]	1661	!-- Heat transfer of ventilation.
	1662	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1663	!-- capacity of air 0.33 Wh/m2K
	1664	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1665	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789
	1666	!< Eq.(10)
	1667
[4246]	1668	!-- Heat transfer coefficient auxiliary variables
	1669	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1670	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1671	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1672	!
	1673	!-- Net short-wave radiation through window area (was i_global)
	1674	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
	1675	!
	1676	!-- Quantities needed for im_calc_temperatures
	1677	i = surf_usm_v(l)%i(m)
[4646]	1678	j = surf_usm_v(l)%j(m)
[4246]	1679	k = surf_usm_v(l)%k(m)
	1680	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
[4687]	1681
[4750]	1682	! indoor_wall_window_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
	1683	! + frac_win * t_window_v(l)%val(nzt_wall,m) &
	1684	! + frac_green * t_green_v(l)%val(nzt_wall,m)
	1685
	1686	indoor_wall_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
	1687	+ frac_win * t_window_v(l)%val(nzt_wall,m) &
	1688	+ frac_green * t_green_v(l)%val(nzt_wall,m)
	1689
[4246]	1690	!
[4646]	1691	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1692	!-- threshold parameter (params_solar_protection), sun protection will
[4246]	1693	!-- be activated
[4646]	1694	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1695	solar_protection_off = 1
[4646]	1696	solar_protection_on = 0
	1697	ELSE
[4246]	1698	solar_protection_off = 0
[4646]	1699	solar_protection_on = 1
[4246]	1700	ENDIF
	1701	!
[4646]	1702	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1703	!-- automatic sun protection.
[4246]	1704	!-- DIN 4108 - 2 chap.8
[4646]	1705	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1706	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1707	solar_protection_on ) &
[4246]	1708	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1709	q_sol = phi_sol
	1710	!
[4646]	1711	!-- Calculation of the mass specific thermal load for internal and external heatsources.
[4246]	1712	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1713	q_c_m = phi_m
	1714	!
[4646]	1715	!-- Calculation mass specific thermal load implied non thermal mass.
	1716	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1717	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1718	!< phi_ia=0,5*phi_int
	1719	q_c_st = phi_st
[4246]	1720	!
[4646]	1721	!-- Calculations for deriving indoor temperature and heat flux into the wall.
	1722	!-- Step 1: indoor temperature without heating and cooling.
[4246]	1723	!-- section C.4.1 Picture C.2 zone 3)
	1724	phi_hc_nd = 0.0_wp
[4702]	1725	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1726	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4246]	1727	!
[4646]	1728	!-- If air temperature between border temperatures of heating and cooling, assign output
	1729	!-- variable, then ready.
	1730	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1731	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1732	phi_hc_nd_ac = 0.0_wp
	1733	phi_hc_nd = phi_hc_nd_ac
	1734	theta_air_ac = theta_air
	1735	!
	1736	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1737	!-- again.
	1738	ELSE
	1739	!
	1740	!-- Temperature not correct, calculation method according to section C4.2
	1741	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1742	!
	1743	!-- Heating or cooling?
	1744	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1745	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1746	ELSE
	1747	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1748	ENDIF
	1749
	1750	!-- Calculate the temperature with phi_hc_nd_10
	1751	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1752	phi_hc_nd = phi_hc_nd_10
	1753
[4702]	1754	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1755	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4646]	1756
[4246]	1757	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1758	!
[4730]	1759	!-- Avoid division by zero at first timestep where the denominator can become zero.
	1760	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
	1761	phi_hc_nd_un = phi_hc_nd_10
	1762	ELSE
	1763	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
	1764	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1765	ENDIF
	1766	!
[4646]	1767	!-- Step 3: with temperature ratio to determine the heating or cooling capacity
	1768	!-- If necessary, limit the power to maximum power.
[4246]	1769	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1770	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
	1771	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1772	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1773	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1774	phi_hc_nd_ac = phi_hc_nd_un
	1775	phi_hc_nd = phi_hc_nd_un
	1776	ELSE
	1777	!
[4646]	1778	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1779	!-- (phi_hc_nd_un negative)
[4246]	1780	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1781	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1782	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1783	ELSE
[4246]	1784	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1785	ENDIF
	1786	ENDIF
[4646]	1787	phi_hc_nd = phi_hc_nd_ac
[4246]	1788	!
	1789	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4702]	1790	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1791	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4246]	1792	theta_air_ac = theta_air
	1793	ENDIF
	1794	!
	1795	!-- Update theta_m_t_prev
[4687]	1796	buildings(nb)%theta_m_t_prev_v(fa) = theta_m_t
[4646]	1797
[4687]	1798
[4246]	1799	q_vent = h_v * ( theta_air - near_facade_temperature )
	1800	!
[4646]	1801	!-- Calculate the operating temperature with weighted mean of temperature of air and mean.
	1802	!-- Will be used for thermal comfort calculations.
[4246]	1803	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
[4687]	1804
[4246]	1805	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
	1806	!
[4646]	1807	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1808	!-- calculate heat transfer through wall layers towards the facade
[4709]	1809	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
	1810	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
[4646]	1811	/ ( facade_element_area - window_area_per_facade )
[4709]	1812	ELSE
	1813	q_wall = 0.0_wp
	1814	ENDIF
	1815
	1816	IF ( window_area_per_facade > 0.0_wp ) THEN
	1817	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
	1818	ELSE
	1819	q_win = 0.0_wp
	1820	ENDIF
	1821
[4246]	1822	!
[4701]	1823	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
	1824	surf_usm_v(l)%iwghf_eb(m) = - q_wall
	1825	surf_usm_v(l)%iwghf_eb_window(m) = - q_win
[4750]	1826
	1827	! print*, "wwfjg", surf_usm_v(l)%iwghf_eb(m), surf_usm_v(l)%iwghf_eb_window(m)
[4246]	1828	!
[4646]	1829	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1830	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1831	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1832	!
[4646]	1833	!-- Calculation of waste heat.
	1834	!-- Anthropogenic heat output.
	1835	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1836	heating_on = 1
	1837	cooling_on = 0
[4646]	1838	ELSE
[4246]	1839	heating_on = 0
	1840	cooling_on = -1
	1841	ENDIF
	1842
[4646]	1843	q_waste_heat = ( phi_hc_nd * ( buildings(nb)%params_waste_heat_h * heating_on + &
	1844	buildings(nb)%params_waste_heat_c * cooling_on ) &
[4850]	1845	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
	1846	!
	1847	!-- Store waste heat and previous previous indoor temperature on surface-data type.
	1848	!-- These will be used in the urban-surface model.
	1849	surf_usm_v(l)%t_prev(m) = buildings(nb)%theta_m_t_prev_v(fa)
[4709]	1850	surf_usm_v(l)%waste_heat(m) = q_waste_heat
[4246]	1851	ENDDO !< Vertical surfaces loop
	1852	ENDIF !< buildings(nb)%on_pe
	1853	ENDDO !< buildings loop
	1854
	1855	!
[4646]	1856	!-- Determine the mean building temperature.
[4246]	1857	DO nb = 1, num_build
	1858	!
[4646]	1859	!-- Allocate dummy array used for summing-up facade elements.
	1860	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	1861	!-- allocated on all PEs.
[4246]	1862	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1863	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1864	t_in_l_send = 0.0_wp
	1865	t_in_recv = 0.0_wp
	1866
	1867	IF ( buildings(nb)%on_pe ) THEN
	1868	t_in_l_send = buildings(nb)%t_in_l
	1869	ENDIF
	1870
	1871
[4646]	1872	#if defined( __parallel )
	1873	CALL MPI_ALLREDUCE( t_in_l_send, &
	1874	t_in_recv, &
	1875	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	1876	MPI_REAL, &
	1877	MPI_SUM, &
	1878	comm2d, &
[4246]	1879	ierr )
	1880
[4646]	1881	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = t_in_recv
[4246]	1882	#else
[4646]	1883	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = buildings(nb)%t_in_l
[4246]	1884	#endif
	1885
	1886	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
	1887	!
[4646]	1888	!-- Average indoor temperature. Note, in case a building is completely surrounded by higher
	1889	!-- buildings, it may have no facade elements at some height levels, which will lead to a
	1890	!-- division by zero.
[4246]	1891	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	1892	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) > 0 ) THEN
	1893	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
	1894	REAL( buildings(nb)%num_facade_h(k) + &
	1895	buildings(nb)%num_facade_v(k), KIND = wp )
[4246]	1896	ENDIF
	1897	ENDDO
[4299]	1898	!
[4646]	1899	!-- If indoor temperature is not defined because of missing facade elements, the values from
	1900	!-- the above-lying level will be taken.
	1901	!-- At least at the top of the buildings facades are defined, so that at least there an indoor
	1902	!-- temperature is defined. This information will propagate downwards the building.
[4299]	1903	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
[4646]	1904	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) <= 0 ) THEN
[4299]	1905	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
	1906	ENDIF
	1907	ENDDO
[4246]	1908	ENDIF
	1909
[4646]	1910
[4246]	1911	!
	1912	!-- Deallocate dummy arrays
	1913	DEALLOCATE( t_in_l_send )
	1914	DEALLOCATE( t_in_recv )
	1915
	1916	ENDDO
[4646]	1917
[4246]	1918	END SUBROUTINE im_main_heatcool
	1919
[4646]	1920
	1921	!--------------------------------------------------------------------------------------------------!
[4246]	1922	! Description:
	1923	!-------------
	1924	!> Check data output for plant canopy model
[4646]	1925	!--------------------------------------------------------------------------------------------------!
[4246]	1926	SUBROUTINE im_check_data_output( var, unit )
[4402]	1927
[4246]	1928	CHARACTER (LEN=*) :: unit !<
	1929	CHARACTER (LEN=*) :: var !<
[4646]	1930
[4246]	1931	SELECT CASE ( TRIM( var ) )
[4646]	1932
	1933
[4246]	1934	CASE ( 'im_hf_roof')
	1935	unit = 'W m-2'
[4646]	1936
[4246]	1937	CASE ( 'im_hf_wall_win' )
	1938	unit = 'W m-2'
[4646]	1939
[4246]	1940	CASE ( 'im_hf_wall_win_waste' )
	1941	unit = 'W m-2'
[4646]	1942
[4246]	1943	CASE ( 'im_hf_roof_waste' )
	1944	unit = 'W m-2'
[4646]	1945
[4246]	1946	CASE ( 'im_t_indoor_mean' )
	1947	unit = 'K'
[4646]	1948
[4246]	1949	CASE ( 'im_t_indoor_roof' )
	1950	unit = 'K'
[4646]	1951
[4246]	1952	CASE ( 'im_t_indoor_wall_win' )
	1953	unit = 'K'
[4842]	1954
[4701]	1955	CASE ( 'im_t_indoor_wall' )
	1956	unit = 'K'
[4646]	1957
[4246]	1958	CASE DEFAULT
	1959	unit = 'illegal'
[4646]	1960
[4246]	1961	END SELECT
[4646]	1962
[4246]	1963	END SUBROUTINE
	1964
	1965
[4646]	1966	!--------------------------------------------------------------------------------------------------!
[4246]	1967	! Description:
	1968	!-------------
	1969	!> Check parameters routine for plant canopy model
[4646]	1970	!--------------------------------------------------------------------------------------------------!
[4246]	1971	SUBROUTINE im_check_parameters
	1972
	1973	! USE control_parameters,
	1974	! ONLY: message_string
[4646]	1975
[4246]	1976	END SUBROUTINE im_check_parameters
	1977
[4646]	1978
	1979	!--------------------------------------------------------------------------------------------------!
[4246]	1980	! Description:
	1981	!-------------
	1982	!> Subroutine defining appropriate grid for netcdf variables.
	1983	!> It is called from subroutine netcdf.
[4646]	1984	!--------------------------------------------------------------------------------------------------!
[4246]	1985	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
	1986
[4646]	1987	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
	1988	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
	1989	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
	1990	CHARACTER (LEN=*), INTENT(IN) :: var
	1991
	1992	LOGICAL, INTENT(OUT) :: found
	1993
	1994
	1995	found = .TRUE.
[4246]	1996	!
	1997	!-- Check for the grid
	1998	SELECT CASE ( TRIM( var ) )
	1999
	2000	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
	2001	grid_x = 'x'
	2002	grid_y = 'y'
	2003	grid_z = 'zw'
	2004	!
	2005	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
	2006	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
	2007	grid_x = 'x'
	2008	grid_y = 'y'
	2009	grid_z = 'zu'
	2010
[4701]	2011	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win', 'indoor_wall' )
[4246]	2012	grid_x = 'x'
	2013	grid_y = 'y'
	2014	grid_z = 'zw'
[4646]	2015
[4246]	2016	CASE DEFAULT
	2017	found = .FALSE.
	2018	grid_x = 'none'
	2019	grid_y = 'none'
	2020	grid_z = 'none'
	2021	END SELECT
[4646]	2022
[4246]	2023	END SUBROUTINE im_define_netcdf_grid
	2024
[4646]	2025
	2026	!--------------------------------------------------------------------------------------------------!
[4246]	2027	! Description:
	2028	! ------------
	2029	!> Subroutine defining 3D output variables
[4646]	2030	!--------------------------------------------------------------------------------------------------!
	2031	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
[4246]	2032
[4402]	2033	USE indices
	2034
	2035	USE kinds
	2036
[4646]	2037	CHARACTER (LEN=*) :: variable !<
[4246]	2038
[4646]	2039	INTEGER(iwp) :: av !<
	2040	INTEGER(iwp) :: i !<
	2041	INTEGER(iwp) :: j !<
	2042	INTEGER(iwp) :: k !<
[4246]	2043	INTEGER(iwp) :: l !<
[4646]	2044	INTEGER(iwp) :: m !<
	2045	INTEGER(iwp) :: nb !< index of the building in the building data structure
[4246]	2046	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
	2047	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
	2048
[4646]	2049	LOGICAL :: found !<
	2050
[4246]	2051	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
	2052
[4768]	2053	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
[4646]	2054
[4246]	2055	local_pf = fill_value
[4646]	2056
[4246]	2057	found = .TRUE.
[4646]	2058
[4246]	2059	SELECT CASE ( TRIM( variable ) )
	2060	!
[4646]	2061	!-- Output of indoor temperature. All grid points within the building are filled with values,
	2062	!-- while atmospheric grid points are set to _FillValues.
[4246]	2063	CASE ( 'im_t_indoor_mean' )
	2064	IF ( av == 0 ) THEN
	2065	DO i = nxl, nxr
	2066	DO j = nys, nyn
	2067	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	2068	!
[4646]	2069	!-- Determine index of the building within the building data structure.
	2070	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	2071	IF ( buildings(nb)%on_pe ) THEN
	2072	!
[4646]	2073	!-- Write mean building temperature onto output array. Please note, in
	2074	!-- contrast to many other loops in the output, the vertical bounds are
	2075	!-- determined by the lowest and hightest vertical index occupied by the
	2076	!-- building.
[4246]	2077	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	2078	local_pf(i,j,k) = buildings(nb)%t_in(k)
	2079	ENDDO
	2080	ENDIF
	2081	ENDIF
	2082	ENDDO
	2083	ENDDO
[4646]	2084	ENDIF
[4246]	2085
	2086	CASE ( 'im_hf_roof' )
[4646]	2087	IF ( av == 0 ) THEN
[4671]	2088	DO m = 1, surf_usm_h(0)%ns
	2089	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	2090	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	2091	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	2092	local_pf(i,j,k) = surf_usm_h(0)%iwghf_eb(m)
[4246]	2093	ENDDO
[4646]	2094	ENDIF
[4246]	2095
	2096	CASE ( 'im_hf_roof_waste' )
[4646]	2097	IF ( av == 0 ) THEN
[4671]	2098	DO m = 1, surf_usm_h(0)%ns
	2099	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	2100	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	2101	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	2102	local_pf(i,j,k) = surf_usm_h(0)%waste_heat(m)
[4246]	2103	ENDDO
	2104	ENDIF
	2105
	2106	CASE ( 'im_hf_wall_win' )
[4646]	2107	IF ( av == 0 ) THEN
[4246]	2108	DO l = 0, 3
	2109	DO m = 1, surf_usm_v(l)%ns
	2110	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2111	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2112	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	2113	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
	2114	ENDDO
	2115	ENDDO
	2116	ENDIF
	2117
	2118	CASE ( 'im_hf_wall_win_waste' )
[4646]	2119	IF ( av == 0 ) THEN
[4246]	2120	DO l = 0, 3
[4646]	2121	DO m = 1, surf_usm_v(l)%ns
[4246]	2122	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2123	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2124	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
[4646]	2125	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
[4246]	2126	ENDDO
	2127	ENDDO
	2128	ENDIF
	2129
	2130	!
	2131	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
	2132
	2133	! CASE ( 'im_t_indoor_roof' )
[4646]	2134	! IF ( av == 0 ) THEN
[4246]	2135	! DO m = 1, surf_usm_h%ns
	2136	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	2137	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
	2138	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
	2139	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
	2140	! ENDDO
	2141	! ENDIF
[4646]	2142	!
[4246]	2143	! CASE ( 'im_t_indoor_wall_win' )
[4646]	2144	! IF ( av == 0 ) THEN
[4246]	2145	! DO l = 0, 3
	2146	! DO m = 1, surf_usm_v(l)%ns
	2147	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2148	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2149	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	2150	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
	2151	! ENDDO
	2152	! ENDDO
	2153	! ENDIF
	2154
	2155	CASE DEFAULT
	2156	found = .FALSE.
	2157
[4646]	2158	END SELECT
	2159
	2160	END SUBROUTINE im_data_output_3d
	2161
	2162
	2163	!--------------------------------------------------------------------------------------------------!
[4246]	2164	! Description:
	2165	! ------------
	2166	!> Parin for &indoor_parameters for indoor model
[4646]	2167	!--------------------------------------------------------------------------------------------------!
[4246]	2168	SUBROUTINE im_parin
[4646]	2169
	2170	USE control_parameters, &
[4246]	2171	ONLY: indoor_model
	2172
[4402]	2173
[4842]	2174	CHARACTER(LEN=100) :: line !< string containing current line of file PARIN
[4246]	2175
[4842]	2176	INTEGER(iwp) :: io_status !< status after reading the namelist file
	2177
[4843]	2178	LOGICAL :: switch_off_module = .FALSE. !< local namelist parameter to switch off the module
	2179	!< although the respective module namelist appears in
	2180	!< the namelist file
[4842]	2181
[4750]	2182	NAMELIST /indoor_parameters/ indoor_during_spinup, &
[4843]	2183	initial_indoor_temperature, &
	2184	switch_off_module
[4246]	2185
	2186	!
[4842]	2187	!-- Move to the beginning of the namelist file and try to find and read the namelist.
	2188	REWIND( 11 )
	2189	READ( 11, indoor_parameters, IOSTAT=io_status )
[4246]	2190
	2191	!
[4842]	2192	!-- Action depending on the READ status
	2193	IF ( io_status == 0 ) THEN
[4246]	2194	!
[4842]	2195	!-- indoor_parameters namelist was found and read correctly. Set flag that indicates that the
	2196	!-- indoor model is switched on.
[4843]	2197	IF ( .NOT. switch_off_module ) indoor_model = .TRUE.
[4246]	2198
[4842]	2199	ELSEIF ( io_status > 0 ) THEN
[4246]	2200	!
[4842]	2201	!-- indoor_parameters namelist was found, but contained errors. Print an error message including
	2202	!-- the line that caused the problem.
	2203	BACKSPACE( 11 )
	2204	READ( 11 , '(A)' ) line
	2205	CALL parin_fail_message( 'indoor_parameters', line )
	2206
	2207	ENDIF
	2208
	2209	!
[4246]	2210	!-- Activate spinup (maybe later
	2211	! IF ( spinup_time > 0.0_wp ) THEN
	2212	! coupling_start_time = spinup_time
	2213	! end_time = end_time + spinup_time
	2214	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
	2215	! spinup_pt_mean = pt_surface
	2216	! ENDIF
	2217	! spinup = .TRUE.
	2218	! ENDIF
	2219
	2220	END SUBROUTINE im_parin
	2221
	2222
	2223	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4868

Download in other formats: