Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4807

Last change on this file since 4807 was 4783, checked in by raasch, 4 years ago
bugfix for reading restart data with MPI-I/O (does not work with blockwise I/O); missed revision comments from previous commit added
Property svn:keywords set to `Id`
File size: 111.1 KB

Rev	Line
[4246]	1	!> @file indoor_model_mod.f90
[4646]	2	!--------------------------------------------------------------------------------------------------!
[4246]	3	! This file is part of the PALM model system.
	4	!
[4646]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[4246]	8	!
[4646]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[4246]	12	!
[4646]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[4246]	15	!
[4481]	16	! Copyright 2018-2020 Leibniz Universitaet Hannover
	17	! Copyright 2018-2020 Hochschule Offenburg
[4646]	18	!--------------------------------------------------------------------------------------------------!
[4246]	19	!
	20	! Current revisions:
	21	! -----------------
[4730]	22	!
[4783]	23	!
[4246]	24	! Former revisions:
	25	! -----------------
	26	! $Id: indoor_model_mod.f90 4783 2020-11-13 13:58:45Z gronemeier $
[4783]	27	! Change parameters for summer_pars and winter_pars (responsible: S. Rissmann)
	28	!
	29	! 4780 2020-11-10 11:17:10Z suehring
[4768]	30	! Enable 3D data output also with 64-bit precision
	31	!
	32	! 4750 2020-10-16 14:27:48Z suehring
[4750]	33	! - Namelist parameter added to switch-off/on the indoor model during wall/soil spinup
	34	! - Bugfix in window-wall treatment during spinup - in the urban-surface model the window fraction
	35	! is set to zero during spinup, so it is done here also
	36	! - Bugfix in wall treatment - inner wall temperature was too low due to wrong weighting of
	37	! wall/green/window fractions
	38	!
	39	! 4730 2020-10-07 10:48:51Z suehring
[4730]	40	! Bugfix - avoid divisions by zero
	41	!
	42	! 4709 2020-09-28 19:20:00Z maronga
[4709]	43	! Bugfix: avoid division by zero in case of zero window fraction (now also for vertical walls).
	44	! Reactivated waste heat.
	45	!
	46	! 4704 2020-09-28 10:13:03Z maronga
[4704]	47	! Bugfix: avoid division by zero in case of zero window fraction
	48	!
	49	! 4702 2020-09-27 18:39:00Z maronga
[4702]	50	! Removed unused variable indoor_wall_window_temperature
	51	!
	52	! 4701 2020-09-27 11:02:15Z maronga
[4701]	53	! Heat transfer for wall and windows back to USM separated into q_wall and q_win (instead q_wall_win).
	54	! Heat flow direction revised (heat flow positive from outside to inside).
	55	! New variable indoor_wall_temperature (for q_wall).
	56	! Removed unused quantity q_trans.
	57	!
	58	! 4698 2020-09-25 08:37:55Z maronga
[4698]	59	! Fixed faulty characters
	60	!
	61	! 4687 2020-09-21 19:40:16Z maronga
[4687]	62	! Bugfix: values of theta_m_t_prev were not stored for individual surfaces and thus re-used by all
	63	! surfaces and buildings, which led to excessive indoor temperatures
	64	!
	65	! 4681 2020-09-16 10:23:06Z pavelkrc
[4681]	66	! Bugfix for implementation of downward surfaces
	67	!
	68	! 4671 2020-09-09 20:27:58Z pavelkrc
[4671]	69	! Implementation of downward facing USM and LSM surfaces
	70	!
	71	! 4646 2020-08-24 16:02:40Z raasch
[4646]	72	! file re-formatted to follow the PALM coding standard
	73	!
	74	! 4481 2020-03-31 18:55:54Z maronga
	75	! Change order of dimension in surface array %frac to allow for better vectorization.
	76	!
[4442]	77	! 4441 2020-03-04 19:20:35Z suehring
[4646]	78	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly calculated
	79	! leading to unrealistically high energy demands and thus to unreallistically high waste-heat
	80	! fluxes.
	81	!
[4402]	82	! 4346 2019-12-18 11:55:56Z motisi
[4646]	83	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
	84	! information used in wall_flags_static_0
	85	!
[4346]	86	! 4329 2019-12-10 15:46:36Z motisi
[4329]	87	! Renamed wall_flags_0 to wall_flags_static_0
[4646]	88	!
[4329]	89	! 4310 2019-11-26 19:01:28Z suehring
[4646]	90	! Remove dt_indoor from namelist input. The indoor model is an hourly-based model, calling it
	91	! more/less often lead to inaccurate results.
	92	!
[4310]	93	! 4299 2019-11-22 10:13:38Z suehring
[4646]	94	! Output of indoor temperature revised (to avoid non-defined values within buildings)
	95	!
[4299]	96	! 4267 2019-10-16 18:58:49Z suehring
[4267]	97	! Bugfix in initialization, some indices to access building_pars where wrong.
	98	! Introduction of seasonal parameters.
[4646]	99	!
[4267]	100	! 4246 2019-09-30 09:27:52Z pavelkrc
[4646]	101	!
	102	!
[4245]	103	! 4242 2019-09-27 12:59:10Z suehring
[4246]	104	! Bugfix in array index
[4646]	105	!
[4246]	106	! 4238 2019-09-25 16:06:01Z suehring
	107	! - Bugfix in determination of minimum facade height and in location message
	108	! - Bugfix, avoid division by zero
[4646]	109	! - Some optimization
	110	!
[4246]	111	! 4227 2019-09-10 18:04:34Z gronemeier
	112	! implement new palm_date_time_mod
	113	!
	114	! 4217 2019-09-04 09:47:05Z scharf
	115	! Corrected "Former revisions" section
	116	!
	117	! 4209 2019-09-02 12:00:03Z suehring
	118	! - Bugfix in initialization of indoor temperature
[4646]	119	! - Prescibe default indoor temperature in case it is not given in the namelist input
[4246]	120	!
	121	! 4182 2019-08-21 14:37:54Z scharf
	122	! Corrected "Former revisions" section
[4646]	123	!
[4246]	124	! 4148 2019-08-08 11:26:00Z suehring
[4646]	125	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing is now considered at
	126	! the correct level.
[4246]	127	! - change calculation of a_m and c_m
	128	! - change calculation of u-values (use h_es in building array)
	129	! - rename h_tr_... to h_t_...
	130	! h_tr_em to h_t_wm
	131	! h_tr_op to h_t_wall
	132	! h_tr_w to h_t_es
	133	! - rename h_ve to h_v
	134	! - rename h_is to h_ms
	135	! - inserted net_floor_area
	136	! - inserted params_waste_heat_h, params_waste_heat_c from building database
	137	! in building array
	138	! - change calculation of q_waste_heat
[4646]	139	! - bugfix in averaging mean indoor temperature
	140	!
[4246]	141	! 3759 2019-02-21 15:53:45Z suehring
	142	! - Calculation of total building volume
	143	! - Several bugfixes
	144	! - Calculation of building height revised
[4646]	145	!
[4246]	146	! 3745 2019-02-15 18:57:56Z suehring
	147	! - remove building_type from module
[4646]	148	! - initialize parameters for each building individually instead of a bulk initializaion with
	149	! identical building type for all
[4246]	150	! - output revised
	151	! - add missing _wp
	152	! - some restructuring of variables in building data structure
[4646]	153	!
[4246]	154	! 3744 2019-02-15 18:38:58Z suehring
	155	! Some interface calls moved to module_interface + cleanup
[4646]	156	!
[4246]	157	! 3469 2018-10-30 20:05:07Z kanani
	158	! Initial revision (tlang, suehring, kanani, srissman)!
	159	!
	160	! Authors:
	161	! --------
	162	! @author Tobias Lang
	163	! @author Jens Pfafferott
	164	! @author Farah Kanani-Suehring
	165	! @author Matthias Suehring
[4698]	166	! @author Sascha Rissmann
	167	! @author Bjoern Maronga
[4246]	168	!
	169	!
	170	! Description:
	171	! ------------
	172	!> Module for Indoor Climate Model (ICM)
	173	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
	174	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
[4646]	175	!> This module differs between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine
	176	!> thermal comfort
	177	!> the heat transfer between indoor and outdoor is simplified
[4246]	178
[4646]	179	!> @todo Many statement comments that are given as doxygen comments need to be changed to normal comments
[4246]	180	!> @todo Replace window_area_per_facade by %frac(1,m) for window
[4646]	181	!> @todo emissivity change for window blinds if solar_protection_on=1
[4246]	182
	183	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
	184	!> @note How to write indoor temperature output to pt array?
	185	!>
[4687]	186	!> @bug Calculation of iwghf_eb and iwghf_eb_window is faulty
[4646]	187	!--------------------------------------------------------------------------------------------------!
	188	MODULE indoor_model_mod
[4246]	189
[4646]	190	USE arrays_3d, &
	191	ONLY: ddzw, &
	192	dzw, &
[4402]	193	pt
	194
[4646]	195	USE control_parameters, &
[4246]	196	ONLY: initializing_actions
	197
	198	USE kinds
[4646]	199
	200	USE netcdf_data_input_mod, &
[4246]	201	ONLY: building_id_f, building_type_f
	202
[4646]	203	USE palm_date_time_mod, &
	204	ONLY: get_date_time, northward_equinox, seconds_per_hour, southward_equinox
[4267]	205
[4646]	206	USE surface_mod, &
[4246]	207	ONLY: surf_usm_h, surf_usm_v
	208
	209
	210	IMPLICIT NONE
	211
	212	!
	213	!-- Define data structure for buidlings.
	214	TYPE build
	215
	216	INTEGER(iwp) :: id !< building ID
[4646]	217	INTEGER(iwp) :: kb_max !< highest vertical index of a building
[4246]	218	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
	219	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
	220	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
	221	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
	222	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
	223	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
	224
[4681]	225	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_h !< index array linking surface-element orientation index
	226	!< for horizontal surfaces with building
[4246]	227	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
[4646]	228	!< for vertical surfaces with building
[4246]	229	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
	230	!< horizontal surfaces with building
[4646]	231	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
[4246]	232	!< vertical surfaces with building
[4646]	233	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
[4246]	234	!< and height level
	235	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
	236	!< and height level
	237
[4646]	238
[4246]	239	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
[4646]	240
[4246]	241	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
	242	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
	243	REAL(wp) :: area_facade !< [m2] area of total facade
	244	REAL(wp) :: building_height !< building height
	245	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
	246	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
	247	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
[4646]	248	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
[4246]	249	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
	250	REAL(wp) :: f_c_win !< [-] shading factor
[4402]	251	REAL(wp) :: fapf !< [m2/m2] floor area per facade
[4246]	252	REAL(wp) :: g_value_win !< [-] SHGC factor
[4646]	253	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
[4246]	254	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
	255	REAL(wp) :: height_storey !< [m] storey heigth
	256	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
[4646]	257	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with
	258	!< eta = 0.9 or -2 for WP with COP = 3
[4246]	259	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
	260	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
	261	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
	262	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
	263	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
	264	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
	265	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
	266	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
	267	REAL(wp) :: net_floor_area !< [m2] netto ground area
	268	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
	269	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
	270	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
	271	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
	272	REAL(wp) :: vol_tot !< [m3] total building volume
	273
	274	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
	275	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
[4687]	276	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_h !< [degree_C] value of theta_m_t from previous time step (horizontal)
	277	REAL(wp), DIMENSION(:), ALLOCATABLE :: theta_m_t_prev_v !< [degree_C] value of theta_m_t from previous time step (vertical)
[4246]	278	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
	279	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
	280	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
[4646]	281
[4246]	282	END TYPE build
	283
	284	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
	285
[4750]	286	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
	287	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
	288	INTEGER(iwp) :: num_build !< total number of buildings in domain
	289	INTEGER(iwp) :: solar_protection_off !< Solar protection off
	290	INTEGER(iwp) :: solar_protection_on !< Solar protection on
	291
	292	LOGICAL :: indoor_during_spinup = .FALSE. !< namelist parameter used to switch-off/on the indoor model during spinup
[4246]	293	!
	294	!-- Declare all global variables within the module
[4646]	295
	296	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to
	297	!< 3600.0 due to model requirements
	298	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	299	!< surface and air (chap. 7.2.2.2)
	300	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	301	!< component and surface (chap. 12.2.2)
	302	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly
	303	!< cooling 2.0_wp
	304	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
	305	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
	306	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
	307	!< Datenbank 27 window_area_per_facade_percent
	308	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
	309	!< on facade exceeds this value
	310
[4246]	311	REAL(wp) :: a_m !< [m2] the effective mass-related area
	312	REAL(wp) :: air_change !< [1/h] Airflow
	313	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
	314	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
	315	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
	316	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
	317	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
[4646]	318	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
	319	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
	320	!< glazed walls (assumption: thermal mass=0)
[4246]	321	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
	322	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
	323	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
	324	!< thermal mass) contains of h_t_wm and h_t_ms
[4646]	325	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the
	326	!< thermal mass)
[4246]	327	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
	328	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
	329	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
	330	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
	331	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
[4646]	332	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
[4246]	333	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
	334	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
[4646]	335	!< reach the demanded required temperature (heating is positive,
	336	!< cooling is negative)
[4246]	337	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
	338	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
	339	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
	340	REAL(wp) :: phi_sol !< [W] solar loads
[4646]	341	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
[4701]	342	REAL(wp) :: q_wall !< [W/m2]heat flux from indoor into wall
	343	REAL(wp) :: q_win !< [W/m2]heat flux from indoor into window
[4246]	344	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
[4646]	345
[4246]	346	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
	347	!< and external heatsources (for energy bilanz)
[4646]	348	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non
	349	!< thermal mass (for energy bilanz)
[4246]	350	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
	351	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
	352	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
[4646]	353
[4246]	354	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
	355	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
	356	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
	357	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
[4646]	358	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
[4246]	359	!< of 10 W/m2
	360	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
	361	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
	362	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
[4687]	363	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature during timestep
[4246]	364	REAL(wp) :: theta_op !< [degree_C] operative temperature
	365	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
	366	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
	367	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
	368	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
[4646]	369
[4267]	370	!
	371	!-- Definition of seasonal parameters, summer and winter, for different building types
[4646]	372	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
	373	0.5_wp, & ! basical airflow without occupancy of the room
[4780]	374	1.5_wp, & ! additional airflow depend of occupancy of the room
[4646]	375	0.5_wp, & ! building_type 2: basical airflow without occupancy
	376	! of the room
	377	1.5_wp, & ! additional airflow depend of occupancy of the room
[4780]	378	0.5_wp, & ! building_type 3: basical airflow without occupancy
[4646]	379	! of the room
	380	1.5_wp, & ! additional airflow depend of occupancy of the room
[4780]	381	1.0_wp, & ! building_type 4: basical airflow without occupancy
[4646]	382	! of the room
[4780]	383	1.0_wp, & ! additional airflow depend of occupancy of the room
	384	1.0_wp, & ! building_type 5: basical airflow without occupancy
[4646]	385	! of the room
[4780]	386	1.0_wp, & ! additional airflow depend of occupancy of the room
	387	1.0_wp, & ! building_type 6: basical airflow without occupancy
	388	! of the room
	389	1.0_wp, & ! additional airflow depend of occupancy of the room
	390	1.0_wp, & ! building_type 7: basical airflow without occupancy
	391	! of the room
	392	1.0_wp & ! additional airflow depend of occupancy of the room
[4267]	393	/), (/ 2, 7 /) )
[4246]	394
[4646]	395	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
[4780]	396	0.5_wp, & ! basical airflow without occupancy of the room
	397	0.0_wp, & ! additional airflow depend of occupancy of the room
	398	0.5_wp, & ! building_type 2: basical airflow without occupancy
[4646]	399	! of the room
[4780]	400	0.0_wp, & ! additional airflow depend of occupancy of the room
	401	0.5_wp, & ! building_type 3: basical airflow without occupancy
[4646]	402	! of the room
[4780]	403	0.0_wp, & ! additional airflow depend of occupancy of the room
	404	0.2_wp, & ! building_type 4: basical airflow without occupancy
[4646]	405	! of the room
[4780]	406	0.8_wp, & ! additional airflow depend of occupancy of the room
	407	0.2_wp, & ! building_type 5: basical airflow without occupancy
[4646]	408	! of the room
[4780]	409	0.8_wp, & ! additional airflow depend of occupancy of the room
	410	0.2_wp, & ! building_type 6: basical airflow without occupancy
[4646]	411	! of the room
[4780]	412	0.8_wp, & ! additional airflow depend of occupancy of the room
	413	0.2_wp, & ! building_type 7: basical airflow without occupancy
[4646]	414	! of the room
[4780]	415	0.8_wp & ! additional airflow depend of occupancy of the room
[4267]	416	/), (/ 2, 7 /) )
	417
[4246]	418	SAVE
	419
	420
	421	PRIVATE
[4646]	422
[4246]	423	!
	424	!-- Add INTERFACES that must be available to other modules
[4646]	425	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, im_check_data_output, &
	426	im_data_output_3d, im_check_parameters
[4246]	427
[4646]	428
[4246]	429	!
	430	!-- Add VARIABLES that must be available to other modules
[4750]	431	PUBLIC dt_indoor, &
	432	indoor_during_spinup, &
	433	skip_time_do_indoor, &
	434	time_indoor
[4246]	435
	436	!
	437	!-- PALM interfaces:
	438	!-- Data output checks for 2D/3D data to be done in check_parameters
	439	INTERFACE im_check_data_output
	440	MODULE PROCEDURE im_check_data_output
	441	END INTERFACE im_check_data_output
	442	!
	443	!-- Input parameter checks to be done in check_parameters
	444	INTERFACE im_check_parameters
	445	MODULE PROCEDURE im_check_parameters
	446	END INTERFACE im_check_parameters
	447	!
	448	!-- Data output of 3D data
	449	INTERFACE im_data_output_3d
	450	MODULE PROCEDURE im_data_output_3d
	451	END INTERFACE im_data_output_3d
	452
	453	!
	454	!-- Definition of data output quantities
	455	INTERFACE im_define_netcdf_grid
	456	MODULE PROCEDURE im_define_netcdf_grid
	457	END INTERFACE im_define_netcdf_grid
[4646]	458	!
[4246]	459	! !
	460	! !-- Output of information to the header file
	461	! INTERFACE im_header
	462	! MODULE PROCEDURE im_header
	463	! END INTERFACE im_header
	464	!
[4646]	465	!-- Calculations for indoor temperatures
[4246]	466	INTERFACE im_calc_temperatures
	467	MODULE PROCEDURE im_calc_temperatures
	468	END INTERFACE im_calc_temperatures
	469	!
[4646]	470	!-- Initialization actions
[4246]	471	INTERFACE im_init
	472	MODULE PROCEDURE im_init
	473	END INTERFACE im_init
	474	!
[4646]	475	!-- Main part of indoor model
[4246]	476	INTERFACE im_main_heatcool
	477	MODULE PROCEDURE im_main_heatcool
	478	END INTERFACE im_main_heatcool
	479	!
	480	!-- Reading of NAMELIST parameters
	481	INTERFACE im_parin
	482	MODULE PROCEDURE im_parin
	483	END INTERFACE im_parin
	484
	485	CONTAINS
	486
[4646]	487	!--------------------------------------------------------------------------------------------------!
[4246]	488	! Description:
	489	! ------------
[4646]	490	!< Calculation of the air temperatures and mean radiation temperature.
	491	!< This is basis for the operative temperature.
	492	!< Based on a Crank-Nicholson scheme with a timestep of a hour.
	493	!--------------------------------------------------------------------------------------------------!
[4702]	494	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	495	near_facade_temperature, phi_hc_nd_dummy, theta_m_t_prev )
[4402]	496
[4246]	497	INTEGER(iwp) :: i
	498	INTEGER(iwp) :: j
	499	INTEGER(iwp) :: k
[4646]	500
[4701]	501	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
[4246]	502	REAL(wp) :: near_facade_temperature
	503	REAL(wp) :: phi_hc_nd_dummy
[4687]	504	REAL(wp), INTENT(IN) :: theta_m_t_prev
[4246]	505	!
	506	!-- Calculation of total mass specific thermal load (internal and external)
[4701]	507	phi_mtot = ( phi_m + h_t_wm * indoor_wall_temperature &
[4646]	508	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
	509	+ h_t_1 * &
	510	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	511	+ near_facade_temperature ) &
	512	) / h_t_2 &
[4246]	513	) !< [degree_C] Eq. (C.5)
[4646]	514	!
[4687]	515	!-- Calculation of component temperature at current timestep
[4646]	516	theta_m_t = ( ( theta_m_t_prev &
	517	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
	518	+ phi_mtot &
	519	) &
	520	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
[4246]	521	) !< [degree_C] Eq. (C.4)
	522	!
[4687]	523	!-- Calculation of mean inner temperature for the RC-node in current timestep
[4246]	524	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
[4646]	525
[4246]	526	!
[4687]	527	!-- Calculation of mean surface temperature of the RC-node in current timestep
[4646]	528	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
	529	+ h_t_1 * ( near_facade_temperature &
	530	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	531	) &
	532	/ ( h_t_ms + h_t_es + h_t_1 ) &
[4246]	533	) !< [degree_C] Eq. (C.10)
[4646]	534
[4246]	535	!
	536	!-- Calculation of the air temperature of the RC-node
[4687]	537
	538
[4646]	539	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature + phi_ia + phi_hc_nd_dummy ) / &
	540	( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
[4246]	541
[4687]	542
[4246]	543	END SUBROUTINE im_calc_temperatures
	544
[4646]	545
	546	!--------------------------------------------------------------------------------------------------!
[4246]	547	! Description:
	548	! ------------
	549	!> Initialization of the indoor model.
[4646]	550	!> Static information are calculated here, e.g. building parameters and geometrical information,
	551	!> anything that doesn't change in time.
[4246]	552	!
	553	!-- Input values
	554	!-- Input datas from Palm, M4
	555	! i_global --> net_sw_in !< global radiation [W/m2]
	556	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
	557	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
[4646]	558	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from
	559	!< 1. Palm volume
[4246]	560	! theta_node --> t_wall_h(nzt_wall,m)
	561	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
[4646]	562	!--------------------------------------------------------------------------------------------------!
[4246]	563	SUBROUTINE im_init
	564
[4646]	565	USE control_parameters, &
[4267]	566	ONLY: message_string, time_since_reference_point
[4246]	567
[4646]	568	USE indices, &
[4346]	569	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
[4246]	570
[4646]	571	USE grid_variables, &
[4246]	572	ONLY: dx, dy
	573
	574	USE pegrid
	575
[4646]	576	USE surface_mod, &
[4246]	577	ONLY: surf_usm_h, surf_usm_v
[4646]	578
	579	USE urban_surface_mod, &
[4246]	580	ONLY: building_pars, building_type
	581
[4267]	582	INTEGER(iwp) :: bt !< local building type
	583	INTEGER(iwp) :: day_of_year !< day of the year
	584	INTEGER(iwp) :: i !< running index along x-direction
	585	INTEGER(iwp) :: j !< running index along y-direction
	586	INTEGER(iwp) :: k !< running index along z-direction
	587	INTEGER(iwp) :: l !< running index for surface-element orientation
	588	INTEGER(iwp) :: m !< running index surface elements
	589	INTEGER(iwp) :: n !< building index
	590	INTEGER(iwp) :: nb !< building index
[4246]	591
	592	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
[4646]	593	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
	594	!< multiple occurences are sorted out
[4246]	595	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	596	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	597	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	598	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
	599	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
	600	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
	601	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
[4646]	602	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
[4246]	603	!< horizontal facade elements
[4646]	604	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
[4246]	605	!< vertical facade elements
[4646]	606	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
	607	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
	608
[4246]	609	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	610	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
[4646]	611
[4246]	612	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
	613	REAL(wp) :: du_tmp !< 1/u_tmp
	614	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
	615	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
	616
	617	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
	618	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
	619	!< on local subdomain
	620
	621	CALL location_message( 'initializing indoor model', 'start' )
	622	!
[4646]	623	!-- Initializing of indoor model is only possible if buildings can be distinguished by their IDs.
[4246]	624	IF ( .NOT. building_id_f%from_file ) THEN
	625	message_string = 'Indoor model requires information about building_id'
	626	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
	627	ENDIF
	628	!
	629	!-- Determine number of different building IDs on local subdomain.
	630	num_buildings_l = 0
	631	num_buildings = 0
	632	ALLOCATE( build_ids_l(1) )
	633	DO i = nxl, nxr
	634	DO j = nys, nyn
	635	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	636	IF ( num_buildings_l(myid) > 0 ) THEN
[4646]	637	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
[4246]	638	CYCLE
	639	ELSE
	640	num_buildings_l(myid) = num_buildings_l(myid) + 1
	641	!
	642	!-- Resize array with different local building ids
	643	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	644	build_ids_l_tmp = build_ids_l
	645	DEALLOCATE( build_ids_l )
	646	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
[4646]	647	build_ids_l(1:num_buildings_l(myid)-1) = &
	648	build_ids_l_tmp(1:num_buildings_l(myid)-1)
[4246]	649	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	650	DEALLOCATE( build_ids_l_tmp )
	651	ENDIF
	652	!
[4646]	653	!-- First occuring building id on PE
	654	ELSE
[4246]	655	num_buildings_l(myid) = num_buildings_l(myid) + 1
	656	build_ids_l(1) = building_id_f%var(j,i)
	657	ENDIF
	658	ENDIF
	659	ENDDO
	660	ENDDO
	661	!
[4646]	662	!-- Determine number of building IDs for the entire domain. (Note, building IDs can appear multiple
	663	!-- times as buildings might be distributed over several PEs.)
	664	#if defined( __parallel )
	665	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, comm2d, &
	666	ierr )
[4246]	667	#else
	668	num_buildings = num_buildings_l
	669	#endif
	670	ALLOCATE( build_ids(1:SUM(num_buildings)) )
	671	!
[4646]	672	!-- Gather building IDs. Therefore, first, determine displacements used required for MPI_GATHERV
	673	!-- call.
[4246]	674	ALLOCATE( displace_dum(0:numprocs-1) )
	675	displace_dum(0) = 0
	676	DO i = 1, numprocs-1
	677	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	678	ENDDO
	679
[4646]	680	#if defined( __parallel )
	681	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
	682	num_buildings(myid), &
	683	MPI_INTEGER, &
	684	build_ids, &
	685	num_buildings, &
	686	displace_dum, &
	687	MPI_INTEGER, &
	688	comm2d, ierr )
[4246]	689
	690	DEALLOCATE( displace_dum )
	691
	692	#else
	693	build_ids = build_ids_l
	694	#endif
	695	!
[4646]	696	!-- Note: in parallel mode, building IDs can occur mutliple times, as each PE has send its own ids.
	697	!-- Therefore, sort out building IDs which appear multiple times.
[4246]	698	num_build = 0
	699	DO n = 1, SIZE(build_ids)
	700
	701	IF ( ALLOCATED(build_ids_final) ) THEN
	702	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
	703	CYCLE
	704	ELSE
	705	num_build = num_build + 1
	706	!
	707	!-- Resize
	708	ALLOCATE( build_ids_final_tmp(1:num_build) )
	709	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	710	DEALLOCATE( build_ids_final )
	711	ALLOCATE( build_ids_final(1:num_build) )
	712	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	713	build_ids_final(num_build) = build_ids(n)
	714	DEALLOCATE( build_ids_final_tmp )
[4646]	715	ENDIF
[4246]	716	ELSE
	717	num_build = num_build + 1
	718	ALLOCATE( build_ids_final(1:num_build) )
	719	build_ids_final(num_build) = build_ids(n)
	720	ENDIF
	721	ENDDO
	722
	723	!
[4646]	724	!-- Allocate building-data structure array. Note, this is a global array and all building IDs on
	725	!-- domain are known by each PE. Further attributes, e.g. height-dependent arrays, however, are only
	726	!-- allocated on PEs where the respective building is present (in order to reduce memory demands).
[4246]	727	ALLOCATE( buildings(1:num_build) )
	728
	729	!
[4646]	730	!-- Store building IDs and check if building with certain ID is present on subdomain.
[4246]	731	DO nb = 1, num_build
	732	buildings(nb)%id = build_ids_final(nb)
	733
[4646]	734	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
[4246]	735	buildings(nb)%on_pe = .TRUE.
[4646]	736	ENDDO
[4246]	737	!
[4646]	738	!-- Determine the maximum vertical dimension occupied by each building.
[4246]	739	ALLOCATE( k_min_l(1:num_build) )
	740	ALLOCATE( k_max_l(1:num_build) )
	741	k_min_l = nzt + 1
[4646]	742	k_max_l = 0
[4246]	743
	744	DO i = nxl, nxr
	745	DO j = nys, nyn
	746	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	747	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	748	DO k = nzb, nzt+1
	749	!
[4646]	750	!-- Check if grid point belongs to a building.
[4346]	751	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
[4246]	752	k_min_l(nb) = MIN( k_min_l(nb), k )
	753	k_max_l(nb) = MAX( k_max_l(nb), k )
	754	ENDIF
	755
	756	ENDDO
	757	ENDIF
	758	ENDDO
	759	ENDDO
	760
[4646]	761	#if defined( __parallel )
	762	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, MPI_INTEGER, MPI_MIN, comm2d, &
	763	ierr )
	764	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, MPI_INTEGER, MPI_MAX, comm2d, &
	765	ierr )
[4246]	766	#else
	767	buildings(:)%kb_min = k_min_l(:)
	768	buildings(:)%kb_max = k_max_l(:)
	769	#endif
	770
	771	DEALLOCATE( k_min_l )
	772	DEALLOCATE( k_max_l )
	773	!
	774	!-- Calculate building height.
	775	DO nb = 1, num_build
	776	buildings(nb)%building_height = 0.0_wp
	777	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	778	buildings(nb)%building_height = buildings(nb)%building_height + dzw(k+1)
[4246]	779	ENDDO
	780	ENDDO
	781	!
	782	!-- Calculate building volume
	783	DO nb = 1, num_build
	784	!
	785	!-- Allocate temporary array for summing-up building volume
	786	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	787	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	788	volume = 0.0_wp
	789	volume_l = 0.0_wp
	790	!
[4646]	791	!-- Calculate building volume per height level on each PE where these building is present.
[4246]	792	IF ( buildings(nb)%on_pe ) THEN
	793
	794	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	795	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	796	buildings(nb)%volume = 0.0_wp
	797	buildings(nb)%vol_frac = 0.0_wp
[4646]	798
	799	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) THEN
[4246]	800	DO i = nxl, nxr
	801	DO j = nys, nyn
	802	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	803	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
[4246]	804	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
	805	ENDDO
	806	ENDDO
	807	ENDDO
	808	ENDIF
	809	ENDIF
	810	!
	811	!-- Sum-up building volume from all subdomains
[4646]	812	#if defined( __parallel )
	813	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, comm2d, ierr )
[4246]	814	#else
	815	volume = volume_l
	816	#endif
	817	!
[4646]	818	!-- Save total building volume as well as local fraction on volume on building data structure.
[4246]	819	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
	820	!
	821	!-- Determine fraction of local on total building volume
	822	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
	823	!
	824	!-- Calculate total building volume
[4646]	825	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
[4246]	826
	827	DEALLOCATE( volume )
	828	DEALLOCATE( volume_l )
	829
	830	ENDDO
	831	!
[4646]	832	!-- Allocate arrays for indoor temperature.
[4246]	833	DO nb = 1, num_build
	834	IF ( buildings(nb)%on_pe ) THEN
	835	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	836	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	837	buildings(nb)%t_in = 0.0_wp
	838	buildings(nb)%t_in_l = 0.0_wp
	839	ENDIF
	840	ENDDO
	841	!
[4646]	842	!-- Allocate arrays for number of facades per height level. Distinguish between horizontal and
	843	!-- vertical facades.
[4246]	844	DO nb = 1, num_build
	845	IF ( buildings(nb)%on_pe ) THEN
	846	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	847	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	848
	849	buildings(nb)%num_facade_h = 0
	850	buildings(nb)%num_facade_v = 0
	851	ENDIF
	852	ENDDO
	853	!
	854	!-- Determine number of facade elements per building on local subdomain.
	855	!-- Distinguish between horizontal and vertical facade elements.
	856	!
	857	!-- Horizontal facades
	858	buildings(:)%num_facades_per_building_h_l = 0
[4671]	859	DO l = 0, 1
	860	DO m = 1, surf_usm_h(l)%ns
[4246]	861	!
[4671]	862	!-- For the current facade element determine corresponding building index.
	863	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	864	!-- element and building location (for horizontal surface elements the horizontal offsets are
	865	!-- zero).
	866	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	867	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
	868	k = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4246]	869	!
[4671]	870	!-- Determine building index and check whether building is on PE.
	871	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	872
[4671]	873	IF ( buildings(nb)%on_pe ) THEN
[4246]	874	!
[4671]	875	!-- Count number of facade elements at each height level.
	876	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
[4246]	877	!
[4671]	878	!-- Moreover, sum up number of local facade elements per building.
	879	buildings(nb)%num_facades_per_building_h_l = &
[4646]	880	buildings(nb)%num_facades_per_building_h_l + 1
[4671]	881	ENDIF
	882	ENDDO
[4246]	883	ENDDO
	884	!
	885	!-- Vertical facades
	886	buildings(:)%num_facades_per_building_v_l = 0
	887	DO l = 0, 3
	888	DO m = 1, surf_usm_v(l)%ns
	889	!
	890	!-- For the current facade element determine corresponding building index.
[4646]	891	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	892	!-- element and building location (for vertical surface elements the vertical offsets are
	893	!-- zero).
[4246]	894	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	895	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	896	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	897
[4646]	898	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	899	IF ( buildings(nb)%on_pe ) THEN
[4646]	900	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
	901	buildings(nb)%num_facades_per_building_v_l = &
	902	buildings(nb)%num_facades_per_building_v_l + 1
[4246]	903	ENDIF
	904	ENDDO
	905	ENDDO
	906	!
[4646]	907	!-- Determine total number of facade elements per building and assign number to building data type.
[4246]	908	DO nb = 1, num_build
	909	!
[4646]	910	!-- Allocate dummy array used for summing-up facade elements.
	911	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	912	!-- allocated on all PEs.
[4246]	913	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	914	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	915	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	916	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	917	num_facades_h = 0
	918	num_facades_v = 0
	919	receive_dum_h = 0
	920	receive_dum_v = 0
	921
	922	IF ( buildings(nb)%on_pe ) THEN
	923	num_facades_h = buildings(nb)%num_facade_h
	924	num_facades_v = buildings(nb)%num_facade_v
	925	ENDIF
	926
[4646]	927	#if defined( __parallel )
	928	CALL MPI_ALLREDUCE( num_facades_h, &
	929	receive_dum_h, &
	930	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	931	MPI_INTEGER, &
	932	MPI_SUM, &
	933	comm2d, &
[4246]	934	ierr )
	935
[4646]	936	CALL MPI_ALLREDUCE( num_facades_v, &
	937	receive_dum_v, &
	938	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	939	MPI_INTEGER, &
	940	MPI_SUM, &
	941	comm2d, &
[4246]	942	ierr )
[4646]	943	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) buildings(nb)%num_facade_h = receive_dum_h
	944	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) buildings(nb)%num_facade_v = receive_dum_v
[4246]	945	#else
	946	buildings(nb)%num_facade_h = num_facades_h
	947	buildings(nb)%num_facade_v = num_facades_v
	948	#endif
	949
	950	!
	951	!-- Deallocate dummy arrays
	952	DEALLOCATE( num_facades_h )
	953	DEALLOCATE( num_facades_v )
	954	DEALLOCATE( receive_dum_h )
	955	DEALLOCATE( receive_dum_v )
	956	!
	957	!-- Allocate index arrays which link facade elements with surface-data type.
[4646]	958	!-- Please note, no height levels are considered here (information is stored in surface-data type
	959	!-- itself).
[4246]	960	IF ( buildings(nb)%on_pe ) THEN
	961	!
	962	!-- Determine number of facade elements per building.
	963	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
	964	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
	965	!
[4646]	966	!-- Allocate arrays which link the building with the horizontal and vertical urban-type
	967	!-- surfaces. Please note, linking arrays are allocated over all facade elements, which is
	968	!-- required in case a building is located at the subdomain boundaries, where the building and
	969	!-- the corresponding surface elements are located on different subdomains.
[4681]	970	ALLOCATE( buildings(nb)%l_h(1:buildings(nb)%num_facades_per_building_h_l) )
[4246]	971	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
	972
	973	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
	974	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
[4687]	975
	976	ALLOCATE( buildings(nb)%theta_m_t_prev_h(1:buildings(nb)%num_facades_per_building_h_l) )
	977	ALLOCATE( buildings(nb)%theta_m_t_prev_v(1:buildings(nb)%num_facades_per_building_v_l) )
[4246]	978	ENDIF
[4402]	979
[4246]	980	IF ( buildings(nb)%on_pe ) THEN
	981	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	982	buildings(nb)%vpf = 0.0_wp
[4402]	983
[4646]	984	facade_area_v = 0.0_wp
[4246]	985	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	986	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) * dzw(k+1) * dx
[4246]	987	ENDDO
[4402]	988	!
[4646]	989	!-- Determine volume per total facade area (vpf). For the horizontal facade area
	990	!-- num_facades_per_building_h can be taken, multiplied with dx*dy.
	991	!-- However, due to grid stretching, vertical facade elements must be summed-up vertically.
	992	!-- Please note, if dx /= dy, an error is made!
	993	buildings(nb)%vpf = buildings(nb)%vol_tot / &
	994	( buildings(nb)%num_facades_per_building_h * dx * dy + facade_area_v )
[4402]	995	!
	996	!-- Determine floor-area-per-facade.
[4646]	997	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h * dx * dy &
	998	/ ( buildings(nb)%num_facades_per_building_h * dx * dy &
	999	+ facade_area_v )
[4246]	1000	ENDIF
	1001	ENDDO
	1002	!
[4646]	1003	!-- Link facade elements with surface data type.
[4246]	1004	!-- Allocate array for counting.
	1005	ALLOCATE( n_fa(1:num_build) )
	1006	n_fa = 1
	1007
[4671]	1008	DO l = 0, 1
	1009	DO m = 1, surf_usm_h(l)%ns
	1010	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	1011	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
[4246]	1012
[4671]	1013	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1014
[4671]	1015	IF ( buildings(nb)%on_pe ) THEN
[4681]	1016	buildings(nb)%l_h(n_fa(nb)) = l
[4671]	1017	buildings(nb)%m_h(n_fa(nb)) = m
	1018	n_fa(nb) = n_fa(nb) + 1
	1019	ENDIF
	1020	ENDDO
[4246]	1021	ENDDO
	1022
	1023	n_fa = 1
	1024	DO l = 0, 3
	1025	DO m = 1, surf_usm_v(l)%ns
	1026	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	1027	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	1028
[4646]	1029	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1030
	1031	IF ( buildings(nb)%on_pe ) THEN
	1032	buildings(nb)%l_v(n_fa(nb)) = l
	1033	buildings(nb)%m_v(n_fa(nb)) = m
[4646]	1034	n_fa(nb) = n_fa(nb) + 1
[4246]	1035	ENDIF
	1036	ENDDO
	1037	ENDDO
	1038	DEALLOCATE( n_fa )
	1039	!
[4646]	1040	!-- Initialize building parameters, first by mean building type. Note, in this case all buildings
	1041	!-- have the same type.
	1042	!-- In a second step initialize with building tpyes from static input file, where building types can
	1043	!-- be individual for each building.
[4267]	1044	buildings(:)%lambda_layer3 = building_pars(31,building_type)
	1045	buildings(:)%s_layer3 = building_pars(44,building_type)
[4246]	1046	buildings(:)%f_c_win = building_pars(119,building_type)
[4646]	1047	buildings(:)%g_value_win = building_pars(120,building_type)
	1048	buildings(:)%u_value_win = building_pars(121,building_type)
	1049	buildings(:)%eta_ve = building_pars(124,building_type)
	1050	buildings(:)%factor_a = building_pars(125,building_type)
[4246]	1051	buildings(:)%factor_c = building_pars(126,building_type)
[4646]	1052	buildings(:)%lambda_at = building_pars(127,building_type)
	1053	buildings(:)%theta_int_h_set = building_pars(13,building_type)
[4267]	1054	buildings(:)%theta_int_c_set = building_pars(12,building_type)
[4646]	1055	buildings(:)%q_h_max = building_pars(128,building_type)
	1056	buildings(:)%q_c_max = building_pars(129,building_type)
[4246]	1057	buildings(:)%qint_high = building_pars(130,building_type)
	1058	buildings(:)%qint_low = building_pars(131,building_type)
	1059	buildings(:)%height_storey = building_pars(132,building_type)
	1060	buildings(:)%height_cei_con = building_pars(133,building_type)
	1061	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
	1062	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
	1063	!
[4267]	1064	!-- Initialize seasonal dependent parameters, depending on day of the year.
[4646]	1065	!-- First, calculated day of the year.
[4267]	1066	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
	1067	!
[4646]	1068	!-- Summer is defined in between northward- and southward equinox.
	1069	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1070	buildings(:)%air_change_low = summer_pars(0,building_type)
[4267]	1071	buildings(:)%air_change_high = summer_pars(1,building_type)
	1072	ELSE
[4646]	1073	buildings(:)%air_change_low = winter_pars(0,building_type)
[4267]	1074	buildings(:)%air_change_high = winter_pars(1,building_type)
	1075	ENDIF
	1076	!
[4646]	1077	!-- Initialize ventilation load. Please note, building types > 7 are actually not allowed (check
	1078	!-- already in urban_surface_mod and netcdf_data_input_mod.
	1079	!-- However, the building data base may be later extended.
	1080	IF ( building_type == 1 .OR. building_type == 2 .OR. &
	1081	building_type == 3 .OR. building_type == 10 .OR. &
[4246]	1082	building_type == 11 .OR. building_type == 12 ) THEN
	1083	buildings(:)%ventilation_int_loads = 1
	1084	!
	1085	!-- Office, building with large windows
[4646]	1086	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
	1087	building_type == 6 .OR. building_type == 7 .OR. &
[4246]	1088	building_type == 8 .OR. building_type == 9) THEN
	1089	buildings(:)%ventilation_int_loads = 2
	1090	!
	1091	!-- Industry, hospitals
[4646]	1092	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
	1093	building_type == 15 .OR. building_type == 16 .OR. &
[4246]	1094	building_type == 17 .OR. building_type == 18 ) THEN
	1095	buildings(:)%ventilation_int_loads = 3
	1096	ENDIF
	1097	!
	1098	!-- Initialization of building parameters - level 2
	1099	IF ( building_type_f%from_file ) THEN
	1100	DO i = nxl, nxr
	1101	DO j = nys, nyn
	1102	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	1103	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1104	bt = building_type_f%var(j,i)
[4646]	1105
[4267]	1106	buildings(nb)%lambda_layer3 = building_pars(31,bt)
	1107	buildings(nb)%s_layer3 = building_pars(44,bt)
[4246]	1108	buildings(nb)%f_c_win = building_pars(119,bt)
[4646]	1109	buildings(nb)%g_value_win = building_pars(120,bt)
	1110	buildings(nb)%u_value_win = building_pars(121,bt)
	1111	buildings(nb)%eta_ve = building_pars(124,bt)
	1112	buildings(nb)%factor_a = building_pars(125,bt)
[4246]	1113	buildings(nb)%factor_c = building_pars(126,bt)
[4646]	1114	buildings(nb)%lambda_at = building_pars(127,bt)
	1115	buildings(nb)%theta_int_h_set = building_pars(13,bt)
[4267]	1116	buildings(nb)%theta_int_c_set = building_pars(12,bt)
[4646]	1117	buildings(nb)%q_h_max = building_pars(128,bt)
	1118	buildings(nb)%q_c_max = building_pars(129,bt)
[4246]	1119	buildings(nb)%qint_high = building_pars(130,bt)
	1120	buildings(nb)%qint_low = building_pars(131,bt)
	1121	buildings(nb)%height_storey = building_pars(132,bt)
[4646]	1122	buildings(nb)%height_cei_con = building_pars(133,bt)
[4246]	1123	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
	1124	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
[4267]	1125
[4646]	1126	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1127	buildings(nb)%air_change_low = summer_pars(0,bt)
[4267]	1128	buildings(nb)%air_change_high = summer_pars(1,bt)
	1129	ELSE
[4646]	1130	buildings(nb)%air_change_low = winter_pars(0,bt)
[4267]	1131	buildings(nb)%air_change_high = winter_pars(1,bt)
	1132	ENDIF
	1133
[4246]	1134	!
[4646]	1135	!-- Initialize ventilaation load. Please note, building types > 7
	1136	!-- are actually not allowed (check already in urban_surface_mod
	1137	!-- and netcdf_data_input_mod. However, the building data base may
	1138	!-- be later extended.
	1139	IF ( bt == 1 .OR. bt == 2 .OR. &
	1140	bt == 3 .OR. bt == 10 .OR. &
[4246]	1141	bt == 11 .OR. bt == 12 ) THEN
	1142	buildings(nb)%ventilation_int_loads = 1
[4646]	1143	!
[4246]	1144	!-- Office, building with large windows
[4646]	1145	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
	1146	bt == 6 .OR. bt == 7 .OR. &
[4246]	1147	bt == 8 .OR. bt == 9) THEN
	1148	buildings(nb)%ventilation_int_loads = 2
	1149	!
	1150	!-- Industry, hospitals
[4646]	1151	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
	1152	bt == 15 .OR. bt == 16 .OR. &
[4246]	1153	bt == 17 .OR. bt == 18 ) THEN
	1154	buildings(nb)%ventilation_int_loads = 3
	1155	ENDIF
	1156	ENDIF
	1157	ENDDO
	1158	ENDDO
	1159	ENDIF
	1160	!
[4646]	1161	!-- Calculation of surface-related heat transfer coeffiecient out of standard u-values from building
	1162	!-- database.
	1163	!-- Only amount of extern and surface is used.
	1164	!-- Otherwise amount between air and surface taken account twice.
[4246]	1165	DO nb = 1, num_build
[4646]	1166	IF ( buildings(nb)%on_pe ) THEN
[4246]	1167	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
[4646]	1168	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
[4246]	1169	0.125_wp + ( 1.0_wp / h_is ) ) )
[4646]	1170
[4246]	1171	du_tmp = 1.0_wp / u_tmp
[4646]	1172
[4267]	1173	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
	1174
[4246]	1175	ENDIF
	1176	ENDDO
	1177	!
	1178	!-- Initialize indoor temperature. Actually only for output at initial state.
	1179	DO nb = 1, num_build
[4687]	1180	IF ( buildings(nb)%on_pe ) THEN
	1181	buildings(nb)%t_in(:) = initial_indoor_temperature
	1182
	1183	!
	1184	!-- (after first loop, use theta_m_t as theta_m_t_prev)
	1185	buildings(nb)%theta_m_t_prev_h(:) = initial_indoor_temperature
	1186	buildings(nb)%theta_m_t_prev_v(:) = initial_indoor_temperature
	1187
	1188	ENDIF
[4246]	1189	ENDDO
	1190
	1191	CALL location_message( 'initializing indoor model', 'finished' )
	1192
	1193	END SUBROUTINE im_init
	1194
	1195
[4646]	1196	!--------------------------------------------------------------------------------------------------!
[4246]	1197	! Description:
	1198	! ------------
	1199	!> Main part of the indoor model.
	1200	!> Calculation of .... (kanani: Please describe)
[4646]	1201	!--------------------------------------------------------------------------------------------------!
[4246]	1202	SUBROUTINE im_main_heatcool
	1203
	1204	! USE basic_constants_and_equations_mod, &
	1205	! ONLY: c_p
	1206
[4646]	1207	USE control_parameters, &
[4246]	1208	ONLY: time_since_reference_point
	1209
[4646]	1210	USE grid_variables, &
[4246]	1211	ONLY: dx, dy
	1212
	1213	USE pegrid
[4646]	1214
	1215	USE surface_mod, &
[4750]	1216	ONLY: ind_pav_green, &
	1217	ind_veg_wall, &
	1218	ind_wat_win, &
	1219	surf_usm_h, &
	1220	surf_usm_v
[4246]	1221
[4646]	1222	USE urban_surface_mod, &
[4750]	1223	ONLY: building_type, &
	1224	nzt_wall, &
	1225	t_green_h, &
	1226	t_green_v, &
	1227	t_wall_h, &
	1228	t_wall_v, &
	1229	t_window_h, &
	1230	t_window_v
[4246]	1231
[4646]	1232
	1233	INTEGER(iwp) :: fa !< running index for facade elements of each building
[4246]	1234	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
	1235	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
	1236	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
	1237	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
	1238	INTEGER(iwp) :: l !< running index for surface-element orientation
	1239	INTEGER(iwp) :: m !< running index surface elements
	1240	INTEGER(iwp) :: nb !< running index for buildings
	1241
[4750]	1242	LOGICAL :: during_spinup !< flag indicating that the simulation is still in wall/soil spinup
	1243
	1244	REAL(wp) :: frac_green !< dummy for green fraction
	1245	REAL(wp) :: frac_wall !< dummy for wall fraction
	1246	REAL(wp) :: frac_win !< dummy for window fraction
	1247	! REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	1248	REAL(wp) :: indoor_wall_temperature !< temperature of innermost wall layer evtl in im_calc_temperatures einfÃŒgen
[4246]	1249	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
	1250	REAL(wp) :: second_of_day !< second of the current day
	1251	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
	1252
	1253	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
	1254	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
	1255	!
[4646]	1256	!-- Determine time of day in hours.
[4246]	1257	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
	1258	time_utc_hour = second_of_day / seconds_per_hour
	1259	!
[4750]	1260	!-- Check if the simulation is still in wall/soil spinup mode
	1261	during_spinup = MERGE( .TRUE., .FALSE., time_since_reference_point < 0.0_wp )
	1262	!
[4246]	1263	!-- Following calculations must be done for each facade element.
	1264	DO nb = 1, num_build
	1265	!
[4646]	1266	!-- First, check whether building is present on local subdomain.
[4246]	1267	IF ( buildings(nb)%on_pe ) THEN
	1268	!
	1269	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
[4646]	1270	!-- Residental Building, panel WBS 70
[4246]	1271	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
[4267]	1272	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1273	schedule_d = 0
	1274	ELSE
[4246]	1275	schedule_d = 1
	1276	ENDIF
	1277	ENDIF
	1278	!
	1279	!-- Office, building with large windows
	1280	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
	1281	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1282	schedule_d = 1
	1283	ELSE
	1284	schedule_d = 0
	1285	ENDIF
	1286	ENDIF
[4646]	1287	!
[4246]	1288	!-- Industry, hospitals
	1289	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
	1290	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
	1291	schedule_d = 1
	1292	ELSE
	1293	schedule_d = 0
	1294	ENDIF
	1295	ENDIF
	1296	!
	1297	!-- Initialize/reset indoor temperature
[4646]	1298	buildings(nb)%t_in_l = 0.0_wp
[4246]	1299	!
	1300	!-- Horizontal surfaces
	1301	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1302	!
[4671]	1303	!-- Determine indices where corresponding surface-type information is stored.
[4681]	1304	l = buildings(nb)%l_h(fa)
	1305	m = buildings(nb)%m_h(fa)
[4246]	1306	!
[4750]	1307	!-- During spinup set window fraction to zero and add these to wall fraction.
	1308	frac_win = MERGE( surf_usm_h(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
	1309	frac_wall = MERGE( surf_usm_h(l)%frac(m,ind_veg_wall), &
	1310	surf_usm_h(l)%frac(m,ind_veg_wall) + &
	1311	surf_usm_h(l)%frac(m,ind_wat_win), &
	1312	.NOT. during_spinup )
	1313	frac_green = surf_usm_h(l)%frac(m,ind_pav_green)
	1314	!
[4646]	1315	!-- Determine building height level index.
[4671]	1316	kk = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4402]	1317	!
[4246]	1318	!-- Building geometries --> not time-dependent
[4646]	1319	facade_element_area = dx * dy !< [m2] surface area per facade element
[4402]	1320	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1321	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1322	buildings(nb)%area_facade = facade_element_area * &
	1323	( buildings(nb)%num_facades_per_building_h + &
[4750]	1324	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
	1325	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
[4246]	1326
	1327	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1328	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1329	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1330	a_m = buildings(nb)%factor_a * total_area * &
	1331	( facade_element_area / buildings(nb)%area_facade ) * &
	1332	buildings(nb)%lambda_at !< [m2] standard values
	1333	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1334	c_m = buildings(nb)%factor_c * total_area * &
	1335	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1336	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1337	!
	1338	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1339	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1340
[4646]	1341	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1342	!< (m2 K) between surface and air, Eq. (9)
	1343	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1344	!< (m2 K) between component and surface, Eq. (64)
	1345	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1346	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1347	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
[4646]	1348	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63),
	1349	!< Section 12.2.2
[4246]	1350	!
[4646]	1351	!-- Internal air loads dependent on the occupacy of the room.
	1352	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int).
	1353	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1354	* floor_area_per_facade )
[4246]	1355	q_int = phi_ia / total_area
	1356	!
[4646]	1357	!-- Airflow dependent on the occupacy of the room.
	1358	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1359	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
[4246]	1360	!
[4646]	1361	!-- Heat transfer of ventilation.
	1362	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1363	!-- capacity of air 0.33 Wh/m2K.
	1364	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1365	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
[4246]	1366
	1367	!-- Heat transfer coefficient auxiliary variables
	1368	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1369	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1370	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1371	!
	1372	!-- Net short-wave radiation through window area (was i_global)
[4671]	1373	net_sw_in = surf_usm_h(l)%rad_sw_in(m) - surf_usm_h(l)%rad_sw_out(m)
[4246]	1374	!
	1375	!-- Quantities needed for im_calc_temperatures
[4671]	1376	i = surf_usm_h(l)%i(m)
	1377	j = surf_usm_h(l)%j(m)
	1378	k = surf_usm_h(l)%k(m)
	1379	near_facade_temperature = surf_usm_h(l)%pt_10cm(m)
[4750]	1380	! indoor_wall_window_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
	1381	! + frac_win * t_window_h(l)%val(nzt_wall,m) &
	1382	! + frac_green * t_green_h(l)%val(nzt_wall,m)
	1383	indoor_wall_temperature = frac_wall * t_wall_h(l)%val(nzt_wall,m) &
	1384	+ frac_win * t_window_h(l)%val(nzt_wall,m) &
	1385	+ frac_green * t_green_h(l)%val(nzt_wall,m)
[4246]	1386	!
[4646]	1387	!-- Solar thermal gains. If net_sw_in larger than sun-protection threshold parameter
	1388	!-- (params_solar_protection), sun protection will be activated.
	1389	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1390	solar_protection_off = 1
	1391	solar_protection_on = 0
[4646]	1392	ELSE
[4246]	1393	solar_protection_off = 0
	1394	solar_protection_on = 1
	1395	ENDIF
	1396	!
[4646]	1397	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1398	!-- automatic sun protection.
[4246]	1399	!-- DIN 4108 - 2 chap.8
[4646]	1400	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1401	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1402	solar_protection_on ) &
[4246]	1403	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
[4646]	1404	q_sol = phi_sol
[4246]	1405	!
[4646]	1406	!-- Calculation of the mass specific thermal load for internal and external heatsources of
	1407	!-- the inner node.
	1408	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with
	1409	!< phi_ia=0,5*phi_int
[4246]	1410	q_c_m = phi_m
	1411	!
[4646]	1412	!-- Calculation mass specific thermal load implied non thermal mass
	1413	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1414	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1415	!< phi_ia=0,5*phi_int
	1416	q_c_st = phi_st
[4246]	1417	!
	1418	!-- Calculations for deriving indoor temperature and heat flux into the wall
[4646]	1419	!-- Step 1: indoor temperature without heating and cooling
[4246]	1420	!-- section C.4.1 Picture C.2 zone 3)
	1421	phi_hc_nd = 0.0_wp
[4646]	1422
[4702]	1423	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1424	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1425	!
[4646]	1426	!-- If air temperature between border temperatures of heating and cooling, assign output
	1427	!-- variable, then ready.
	1428	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1429	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1430	phi_hc_nd_ac = 0.0_wp
[4646]	1431	phi_hc_nd = phi_hc_nd_ac
[4246]	1432	theta_air_ac = theta_air
	1433	!
	1434	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1435	!-- again.
	1436	ELSE
	1437	!
	1438	!-- Temperature not correct, calculation method according to section C4.2
[4646]	1439	theta_air_0 = theta_air !< temperature without heating/cooling
[4246]	1440	!
	1441	!-- Heating or cooling?
	1442	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1443	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1444	ELSE
	1445	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1446	ENDIF
	1447	!
[4646]	1448	!-- Calculate the temperature with phi_hc_nd_10
[4246]	1449	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1450	phi_hc_nd = phi_hc_nd_10
[4646]	1451
[4702]	1452	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1453	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1454	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
	1455	!
[4730]	1456	!-- Avoid division by zero at first timestep where the denominator can become zero.
	1457	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
	1458	phi_hc_nd_un = phi_hc_nd_10
	1459	ELSE
	1460	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
	1461	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1462	ENDIF
	1463	!
[4646]	1464	!-- Step 3: with temperature ratio to determine the heating or cooling capacity.
	1465	!-- If necessary, limit the power to maximum power.
[4246]	1466	!-- section C.4.1 Picture C.2 zone 2) and 4)
[4646]	1467	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
[4246]	1468	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1469	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1470	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1471	phi_hc_nd_ac = phi_hc_nd_un
[4646]	1472	phi_hc_nd = phi_hc_nd_un
[4246]	1473	ELSE
	1474	!
[4646]	1475	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1476	!-- (phi_hc_nd_un negative)
[4246]	1477	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1478	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1479	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1480	ELSE
[4246]	1481	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1482	ENDIF
	1483	ENDIF
[4646]	1484	phi_hc_nd = phi_hc_nd_ac
[4246]	1485	!
	1486	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4702]	1487	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1488	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_h(fa) )
[4246]	1489	theta_air_ac = theta_air
	1490	ENDIF
	1491	!
	1492	!-- Update theta_m_t_prev
[4687]	1493	buildings(nb)%theta_m_t_prev_h(fa) = theta_m_t
[4646]	1494
[4687]	1495
[4246]	1496	q_vent = h_v * ( theta_air - near_facade_temperature )
	1497	!
[4646]	1498	!-- Calculate the operating temperature with weighted mean temperature of air and mean
	1499	!-- solar temperature.
	1500	!-- Will be used for thermal comfort calculations.
[4246]	1501	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
[4687]	1502
[4671]	1503	! surf_usm_h(l)%t_indoor(m) = theta_op !< not integrated now
[4246]	1504	!
[4646]	1505	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1506	!-- calculate heat transfer through wall layers towards the facade
	1507	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
[4704]	1508	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
	1509	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
[4646]	1510	/ ( facade_element_area - window_area_per_facade )
[4704]	1511	ELSE
	1512	q_wall = 0.0_wp
	1513	ENDIF
	1514
	1515	IF ( window_area_per_facade > 0.0_wp ) THEN
	1516	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
	1517	ELSE
	1518	q_win = 0.0_wp
	1519	ENDIF
[4246]	1520	!
[4701]	1521	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
	1522	surf_usm_h(l)%iwghf_eb(m) = - q_wall
	1523	surf_usm_h(l)%iwghf_eb_window(m) = - q_win
[4246]	1524	!
[4646]	1525	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1526	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1527	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1528	!
[4646]	1529	!-- Calculation of waste heat.
	1530	!-- Anthropogenic heat output.
	1531	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1532	heating_on = 1
	1533	cooling_on = 0
[4646]	1534	ELSE
[4246]	1535	heating_on = 0
	1536	cooling_on = -1
	1537	ENDIF
	1538
[4646]	1539	q_waste_heat = ( phi_hc_nd * ( &
	1540	buildings(nb)%params_waste_heat_h * heating_on + &
	1541	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1542	) / facade_element_area !< [W/m2] , observe the directional
	1543	!< convention in PALM!
[4709]	1544	surf_usm_h(l)%waste_heat(m) = q_waste_heat
[4246]	1545	ENDDO !< Horizontal surfaces loop
	1546	!
	1547	!-- Vertical surfaces
	1548	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1549	!
[4646]	1550	!-- Determine indices where corresponding surface-type information is stored.
[4246]	1551	l = buildings(nb)%l_v(fa)
	1552	m = buildings(nb)%m_v(fa)
	1553	!
[4750]	1554	!-- During spinup set window fraction to zero and add these to wall fraction.
	1555	frac_win = MERGE( surf_usm_v(l)%frac(m,ind_wat_win), 0.0_wp, .NOT. during_spinup )
	1556	frac_wall = MERGE( surf_usm_v(l)%frac(m,ind_veg_wall), &
	1557	surf_usm_v(l)%frac(m,ind_veg_wall) + &
	1558	surf_usm_v(l)%frac(m,ind_wat_win), &
	1559	.NOT. during_spinup )
	1560	frac_green = surf_usm_v(l)%frac(m,ind_pav_green)
	1561	!
[4646]	1562	!-- Determine building height level index.
[4246]	1563	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	1564	!
[4646]	1565	!-- (SOME OF THE FOLLOWING (not time-dependent) COULD PROBABLY GO INTO A FUNCTION
[4246]	1566	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
	1567	!-- Building geometries --> not time-dependent
[4402]	1568	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
	1569	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
	1570
	1571	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1572	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1573	buildings(nb)%area_facade = facade_element_area * &
	1574	( buildings(nb)%num_facades_per_building_h + &
[4750]	1575	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
	1576	window_area_per_facade = frac_win * facade_element_area !< [m2] window area per facade element
[4246]	1577
	1578	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1579	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1580	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1581	a_m = buildings(nb)%factor_a * total_area * &
	1582	( facade_element_area / buildings(nb)%area_facade ) * &
	1583	buildings(nb)%lambda_at !< [m2] standard values
	1584	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
[4246]	1585	c_m = buildings(nb)%factor_c * total_area * &
[4646]	1586	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1587	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1588	!
	1589	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1590	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1591
[4646]	1592	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1593	!< (m2 K) between surface and air, Eq. (9)
	1594	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1595	!< (m2 K) between component and surface, Eq. (64)
	1596	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1597	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1598	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
	1599	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
	1600	!
[4646]	1601	!-- Internal air loads dependent on the occupacy of the room.
	1602	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy
	1603	!-- (qint_high) (0,5*phi_int)
	1604	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1605	* floor_area_per_facade )
[4246]	1606	q_int = phi_ia
	1607
	1608	!
[4646]	1609	!-- Airflow dependent on the occupacy of the room.
	1610	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy
	1611	!-- (air_change_high)
	1612	air_change = ( buildings(nb)%air_change_high * schedule_d + &
[4750]	1613	buildings(nb)%air_change_low )
[4246]	1614	!
[4646]	1615	!-- Heat transfer of ventilation.
	1616	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1617	!-- capacity of air 0.33 Wh/m2K
	1618	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1619	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789
	1620	!< Eq.(10)
	1621
[4246]	1622	!-- Heat transfer coefficient auxiliary variables
	1623	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1624	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1625	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1626	!
	1627	!-- Net short-wave radiation through window area (was i_global)
	1628	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
	1629	!
	1630	!-- Quantities needed for im_calc_temperatures
	1631	i = surf_usm_v(l)%i(m)
[4646]	1632	j = surf_usm_v(l)%j(m)
[4246]	1633	k = surf_usm_v(l)%k(m)
	1634	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
[4687]	1635
[4750]	1636	! indoor_wall_window_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
	1637	! + frac_win * t_window_v(l)%val(nzt_wall,m) &
	1638	! + frac_green * t_green_v(l)%val(nzt_wall,m)
	1639
	1640	indoor_wall_temperature = frac_wall * t_wall_v(l)%val(nzt_wall,m) &
	1641	+ frac_win * t_window_v(l)%val(nzt_wall,m) &
	1642	+ frac_green * t_green_v(l)%val(nzt_wall,m)
	1643
[4246]	1644	!
[4646]	1645	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1646	!-- threshold parameter (params_solar_protection), sun protection will
[4246]	1647	!-- be activated
[4646]	1648	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1649	solar_protection_off = 1
[4646]	1650	solar_protection_on = 0
	1651	ELSE
[4246]	1652	solar_protection_off = 0
[4646]	1653	solar_protection_on = 1
[4246]	1654	ENDIF
	1655	!
[4646]	1656	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1657	!-- automatic sun protection.
[4246]	1658	!-- DIN 4108 - 2 chap.8
[4646]	1659	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1660	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1661	solar_protection_on ) &
[4246]	1662	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1663	q_sol = phi_sol
	1664	!
[4646]	1665	!-- Calculation of the mass specific thermal load for internal and external heatsources.
[4246]	1666	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1667	q_c_m = phi_m
	1668	!
[4646]	1669	!-- Calculation mass specific thermal load implied non thermal mass.
	1670	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1671	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1672	!< phi_ia=0,5*phi_int
	1673	q_c_st = phi_st
[4246]	1674	!
[4646]	1675	!-- Calculations for deriving indoor temperature and heat flux into the wall.
	1676	!-- Step 1: indoor temperature without heating and cooling.
[4246]	1677	!-- section C.4.1 Picture C.2 zone 3)
	1678	phi_hc_nd = 0.0_wp
[4702]	1679	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1680	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4246]	1681	!
[4646]	1682	!-- If air temperature between border temperatures of heating and cooling, assign output
	1683	!-- variable, then ready.
	1684	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1685	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1686	phi_hc_nd_ac = 0.0_wp
	1687	phi_hc_nd = phi_hc_nd_ac
	1688	theta_air_ac = theta_air
	1689	!
	1690	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1691	!-- again.
	1692	ELSE
	1693	!
	1694	!-- Temperature not correct, calculation method according to section C4.2
	1695	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1696	!
	1697	!-- Heating or cooling?
	1698	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1699	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1700	ELSE
	1701	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1702	ENDIF
	1703
	1704	!-- Calculate the temperature with phi_hc_nd_10
	1705	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1706	phi_hc_nd = phi_hc_nd_10
	1707
[4702]	1708	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1709	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4646]	1710
[4246]	1711	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1712	!
[4730]	1713	!-- Avoid division by zero at first timestep where the denominator can become zero.
	1714	IF ( ABS( theta_air_10 - theta_air_0 ) < 1E-10_wp ) THEN
	1715	phi_hc_nd_un = phi_hc_nd_10
	1716	ELSE
	1717	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
	1718	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1719	ENDIF
	1720	!
[4646]	1721	!-- Step 3: with temperature ratio to determine the heating or cooling capacity
	1722	!-- If necessary, limit the power to maximum power.
[4246]	1723	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1724	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
	1725	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1726	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1727	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1728	phi_hc_nd_ac = phi_hc_nd_un
	1729	phi_hc_nd = phi_hc_nd_un
	1730	ELSE
	1731	!
[4646]	1732	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1733	!-- (phi_hc_nd_un negative)
[4246]	1734	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1735	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1736	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1737	ELSE
[4246]	1738	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1739	ENDIF
	1740	ENDIF
[4646]	1741	phi_hc_nd = phi_hc_nd_ac
[4246]	1742	!
	1743	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4702]	1744	CALL im_calc_temperatures ( i, j, k, indoor_wall_temperature, &
[4687]	1745	near_facade_temperature, phi_hc_nd, buildings(nb)%theta_m_t_prev_v(fa) )
[4246]	1746	theta_air_ac = theta_air
	1747	ENDIF
	1748	!
	1749	!-- Update theta_m_t_prev
[4687]	1750	buildings(nb)%theta_m_t_prev_v(fa) = theta_m_t
[4646]	1751
[4687]	1752
[4246]	1753	q_vent = h_v * ( theta_air - near_facade_temperature )
	1754	!
[4646]	1755	!-- Calculate the operating temperature with weighted mean of temperature of air and mean.
	1756	!-- Will be used for thermal comfort calculations.
[4246]	1757	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
[4687]	1758
[4246]	1759	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
	1760	!
[4646]	1761	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1762	!-- calculate heat transfer through wall layers towards the facade
[4709]	1763	IF ( (facade_element_area - window_area_per_facade) > 0.0_wp ) THEN
	1764	q_wall = h_t_wm * ( indoor_wall_temperature - theta_m ) &
[4646]	1765	/ ( facade_element_area - window_area_per_facade )
[4709]	1766	ELSE
	1767	q_wall = 0.0_wp
	1768	ENDIF
	1769
	1770	IF ( window_area_per_facade > 0.0_wp ) THEN
	1771	q_win = h_t_es * ( pt(k,j,i) - theta_s ) / ( window_area_per_facade )
	1772	ELSE
	1773	q_win = 0.0_wp
	1774	ENDIF
	1775
[4246]	1776	!
[4701]	1777	!-- Transfer q_wall & q_win back to USM (innermost wall/window layer)
	1778	surf_usm_v(l)%iwghf_eb(m) = - q_wall
	1779	surf_usm_v(l)%iwghf_eb_window(m) = - q_win
[4750]	1780
	1781	! print*, "wwfjg", surf_usm_v(l)%iwghf_eb(m), surf_usm_v(l)%iwghf_eb_window(m)
[4246]	1782	!
[4646]	1783	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1784	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1785	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1786	!
[4646]	1787	!-- Calculation of waste heat.
	1788	!-- Anthropogenic heat output.
	1789	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1790	heating_on = 1
	1791	cooling_on = 0
[4646]	1792	ELSE
[4246]	1793	heating_on = 0
	1794	cooling_on = -1
	1795	ENDIF
	1796
[4646]	1797	q_waste_heat = ( phi_hc_nd * ( buildings(nb)%params_waste_heat_h * heating_on + &
	1798	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1799	) / facade_element_area !< [W/m2] , observe the directional convention in
	1800	!< PALM!
[4709]	1801	surf_usm_v(l)%waste_heat(m) = q_waste_heat
[4246]	1802	ENDDO !< Vertical surfaces loop
	1803	ENDIF !< buildings(nb)%on_pe
	1804	ENDDO !< buildings loop
	1805
	1806	!
[4646]	1807	!-- Determine the mean building temperature.
[4246]	1808	DO nb = 1, num_build
	1809	!
[4646]	1810	!-- Allocate dummy array used for summing-up facade elements.
	1811	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	1812	!-- allocated on all PEs.
[4246]	1813	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1814	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1815	t_in_l_send = 0.0_wp
	1816	t_in_recv = 0.0_wp
	1817
	1818	IF ( buildings(nb)%on_pe ) THEN
	1819	t_in_l_send = buildings(nb)%t_in_l
	1820	ENDIF
	1821
	1822
[4646]	1823	#if defined( __parallel )
	1824	CALL MPI_ALLREDUCE( t_in_l_send, &
	1825	t_in_recv, &
	1826	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	1827	MPI_REAL, &
	1828	MPI_SUM, &
	1829	comm2d, &
[4246]	1830	ierr )
	1831
[4646]	1832	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = t_in_recv
[4246]	1833	#else
[4646]	1834	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = buildings(nb)%t_in_l
[4246]	1835	#endif
	1836
	1837	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
	1838	!
[4646]	1839	!-- Average indoor temperature. Note, in case a building is completely surrounded by higher
	1840	!-- buildings, it may have no facade elements at some height levels, which will lead to a
	1841	!-- division by zero.
[4246]	1842	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	1843	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) > 0 ) THEN
	1844	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
	1845	REAL( buildings(nb)%num_facade_h(k) + &
	1846	buildings(nb)%num_facade_v(k), KIND = wp )
[4246]	1847	ENDIF
	1848	ENDDO
[4299]	1849	!
[4646]	1850	!-- If indoor temperature is not defined because of missing facade elements, the values from
	1851	!-- the above-lying level will be taken.
	1852	!-- At least at the top of the buildings facades are defined, so that at least there an indoor
	1853	!-- temperature is defined. This information will propagate downwards the building.
[4299]	1854	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
[4646]	1855	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) <= 0 ) THEN
[4299]	1856	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
	1857	ENDIF
	1858	ENDDO
[4246]	1859	ENDIF
	1860
[4646]	1861
[4246]	1862	!
	1863	!-- Deallocate dummy arrays
	1864	DEALLOCATE( t_in_l_send )
	1865	DEALLOCATE( t_in_recv )
	1866
	1867	ENDDO
[4646]	1868
[4246]	1869	END SUBROUTINE im_main_heatcool
	1870
[4646]	1871
	1872	!--------------------------------------------------------------------------------------------------!
[4246]	1873	! Description:
	1874	!-------------
	1875	!> Check data output for plant canopy model
[4646]	1876	!--------------------------------------------------------------------------------------------------!
[4246]	1877	SUBROUTINE im_check_data_output( var, unit )
[4402]	1878
[4246]	1879	CHARACTER (LEN=*) :: unit !<
	1880	CHARACTER (LEN=*) :: var !<
[4646]	1881
[4246]	1882	SELECT CASE ( TRIM( var ) )
[4646]	1883
	1884
[4246]	1885	CASE ( 'im_hf_roof')
	1886	unit = 'W m-2'
[4646]	1887
[4246]	1888	CASE ( 'im_hf_wall_win' )
	1889	unit = 'W m-2'
[4646]	1890
[4246]	1891	CASE ( 'im_hf_wall_win_waste' )
	1892	unit = 'W m-2'
[4646]	1893
[4246]	1894	CASE ( 'im_hf_roof_waste' )
	1895	unit = 'W m-2'
[4646]	1896
[4246]	1897	CASE ( 'im_t_indoor_mean' )
	1898	unit = 'K'
[4646]	1899
[4246]	1900	CASE ( 'im_t_indoor_roof' )
	1901	unit = 'K'
[4646]	1902
[4246]	1903	CASE ( 'im_t_indoor_wall_win' )
	1904	unit = 'K'
[4701]	1905
	1906	CASE ( 'im_t_indoor_wall' )
	1907	unit = 'K'
[4646]	1908
[4246]	1909	CASE DEFAULT
	1910	unit = 'illegal'
[4646]	1911
[4246]	1912	END SELECT
[4646]	1913
[4246]	1914	END SUBROUTINE
	1915
	1916
[4646]	1917	!--------------------------------------------------------------------------------------------------!
[4246]	1918	! Description:
	1919	!-------------
	1920	!> Check parameters routine for plant canopy model
[4646]	1921	!--------------------------------------------------------------------------------------------------!
[4246]	1922	SUBROUTINE im_check_parameters
	1923
	1924	! USE control_parameters,
	1925	! ONLY: message_string
[4646]	1926
[4246]	1927	END SUBROUTINE im_check_parameters
	1928
[4646]	1929
	1930	!--------------------------------------------------------------------------------------------------!
[4246]	1931	! Description:
	1932	!-------------
	1933	!> Subroutine defining appropriate grid for netcdf variables.
	1934	!> It is called from subroutine netcdf.
[4646]	1935	!--------------------------------------------------------------------------------------------------!
[4246]	1936	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
	1937
[4646]	1938	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
	1939	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
	1940	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
	1941	CHARACTER (LEN=*), INTENT(IN) :: var
	1942
	1943	LOGICAL, INTENT(OUT) :: found
	1944
	1945
	1946	found = .TRUE.
[4246]	1947	!
	1948	!-- Check for the grid
	1949	SELECT CASE ( TRIM( var ) )
	1950
	1951	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
	1952	grid_x = 'x'
	1953	grid_y = 'y'
	1954	grid_z = 'zw'
	1955	!
	1956	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
	1957	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
	1958	grid_x = 'x'
	1959	grid_y = 'y'
	1960	grid_z = 'zu'
	1961
[4701]	1962	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win', 'indoor_wall' )
[4246]	1963	grid_x = 'x'
	1964	grid_y = 'y'
	1965	grid_z = 'zw'
[4646]	1966
[4246]	1967	CASE DEFAULT
	1968	found = .FALSE.
	1969	grid_x = 'none'
	1970	grid_y = 'none'
	1971	grid_z = 'none'
	1972	END SELECT
[4646]	1973
[4246]	1974	END SUBROUTINE im_define_netcdf_grid
	1975
[4646]	1976
	1977	!--------------------------------------------------------------------------------------------------!
[4246]	1978	! Description:
	1979	! ------------
	1980	!> Subroutine defining 3D output variables
[4646]	1981	!--------------------------------------------------------------------------------------------------!
	1982	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
[4246]	1983
[4402]	1984	USE indices
	1985
	1986	USE kinds
	1987
[4646]	1988	CHARACTER (LEN=*) :: variable !<
[4246]	1989
[4646]	1990	INTEGER(iwp) :: av !<
	1991	INTEGER(iwp) :: i !<
	1992	INTEGER(iwp) :: j !<
	1993	INTEGER(iwp) :: k !<
[4246]	1994	INTEGER(iwp) :: l !<
[4646]	1995	INTEGER(iwp) :: m !<
	1996	INTEGER(iwp) :: nb !< index of the building in the building data structure
[4246]	1997	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
	1998	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
	1999
[4646]	2000	LOGICAL :: found !<
	2001
[4246]	2002	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
	2003
[4768]	2004	REAL(wp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
[4646]	2005
[4246]	2006	local_pf = fill_value
[4646]	2007
[4246]	2008	found = .TRUE.
[4646]	2009
[4246]	2010	SELECT CASE ( TRIM( variable ) )
	2011	!
[4646]	2012	!-- Output of indoor temperature. All grid points within the building are filled with values,
	2013	!-- while atmospheric grid points are set to _FillValues.
[4246]	2014	CASE ( 'im_t_indoor_mean' )
	2015	IF ( av == 0 ) THEN
	2016	DO i = nxl, nxr
	2017	DO j = nys, nyn
	2018	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	2019	!
[4646]	2020	!-- Determine index of the building within the building data structure.
	2021	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	2022	IF ( buildings(nb)%on_pe ) THEN
	2023	!
[4646]	2024	!-- Write mean building temperature onto output array. Please note, in
	2025	!-- contrast to many other loops in the output, the vertical bounds are
	2026	!-- determined by the lowest and hightest vertical index occupied by the
	2027	!-- building.
[4246]	2028	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	2029	local_pf(i,j,k) = buildings(nb)%t_in(k)
	2030	ENDDO
	2031	ENDIF
	2032	ENDIF
	2033	ENDDO
	2034	ENDDO
[4646]	2035	ENDIF
[4246]	2036
	2037	CASE ( 'im_hf_roof' )
[4646]	2038	IF ( av == 0 ) THEN
[4671]	2039	DO m = 1, surf_usm_h(0)%ns
	2040	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	2041	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	2042	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	2043	local_pf(i,j,k) = surf_usm_h(0)%iwghf_eb(m)
[4246]	2044	ENDDO
[4646]	2045	ENDIF
[4246]	2046
	2047	CASE ( 'im_hf_roof_waste' )
[4646]	2048	IF ( av == 0 ) THEN
[4671]	2049	DO m = 1, surf_usm_h(0)%ns
	2050	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	2051	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	2052	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	2053	local_pf(i,j,k) = surf_usm_h(0)%waste_heat(m)
[4246]	2054	ENDDO
	2055	ENDIF
	2056
	2057	CASE ( 'im_hf_wall_win' )
[4646]	2058	IF ( av == 0 ) THEN
[4246]	2059	DO l = 0, 3
	2060	DO m = 1, surf_usm_v(l)%ns
	2061	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2062	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2063	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	2064	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
	2065	ENDDO
	2066	ENDDO
	2067	ENDIF
	2068
	2069	CASE ( 'im_hf_wall_win_waste' )
[4646]	2070	IF ( av == 0 ) THEN
[4246]	2071	DO l = 0, 3
[4646]	2072	DO m = 1, surf_usm_v(l)%ns
[4246]	2073	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2074	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2075	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
[4646]	2076	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
[4246]	2077	ENDDO
	2078	ENDDO
	2079	ENDIF
	2080
	2081	!
	2082	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
	2083
	2084	! CASE ( 'im_t_indoor_roof' )
[4646]	2085	! IF ( av == 0 ) THEN
[4246]	2086	! DO m = 1, surf_usm_h%ns
	2087	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	2088	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
	2089	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
	2090	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
	2091	! ENDDO
	2092	! ENDIF
[4646]	2093	!
[4246]	2094	! CASE ( 'im_t_indoor_wall_win' )
[4646]	2095	! IF ( av == 0 ) THEN
[4246]	2096	! DO l = 0, 3
	2097	! DO m = 1, surf_usm_v(l)%ns
	2098	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	2099	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	2100	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	2101	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
	2102	! ENDDO
	2103	! ENDDO
	2104	! ENDIF
	2105
	2106	CASE DEFAULT
	2107	found = .FALSE.
	2108
[4646]	2109	END SELECT
	2110
	2111	END SUBROUTINE im_data_output_3d
	2112
	2113
	2114	!--------------------------------------------------------------------------------------------------!
[4246]	2115	! Description:
	2116	! ------------
	2117	!> Parin for &indoor_parameters for indoor model
[4646]	2118	!--------------------------------------------------------------------------------------------------!
[4246]	2119	SUBROUTINE im_parin
[4646]	2120
	2121	USE control_parameters, &
[4246]	2122	ONLY: indoor_model
	2123
[4402]	2124
[4246]	2125	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
	2126
[4750]	2127	NAMELIST /indoor_parameters/ indoor_during_spinup, &
	2128	initial_indoor_temperature
[4246]	2129
[4646]	2130
[4246]	2131	!
	2132	!-- Try to find indoor model package
	2133	REWIND ( 11 )
	2134	line = ' '
[4646]	2135	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
[4246]	2136	READ ( 11, '(A)', END=10 ) line
	2137	ENDDO
	2138	BACKSPACE ( 11 )
	2139
	2140	!
	2141	!-- Read user-defined namelist
	2142	READ ( 11, indoor_parameters )
	2143	!
	2144	!-- Set flag that indicates that the indoor model is switched on
	2145	indoor_model = .TRUE.
	2146
	2147	!
	2148	!-- Activate spinup (maybe later
	2149	! IF ( spinup_time > 0.0_wp ) THEN
	2150	! coupling_start_time = spinup_time
	2151	! end_time = end_time + spinup_time
	2152	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
	2153	! spinup_pt_mean = pt_surface
	2154	! ENDIF
	2155	! spinup = .TRUE.
	2156	! ENDIF
	2157
	2158	10 CONTINUE
[4646]	2159
[4246]	2160	END SUBROUTINE im_parin
	2161
	2162
	2163	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |