Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4672

Last change on this file since 4672 was 4671, checked in by pavelkrc, 4 years ago
Radiative transfer model RTM version 4.1
Property svn:keywords set to `Id`
File size: 103.6 KB

Rev	Line
[4246]	1	!> @file indoor_model_mod.f90
[4646]	2	!--------------------------------------------------------------------------------------------------!
[4246]	3	! This file is part of the PALM model system.
	4	!
[4646]	5	! PALM is free software: you can redistribute it and/or modify it under the terms of the GNU General
	6	! Public License as published by the Free Software Foundation, either version 3 of the License, or
	7	! (at your option) any later version.
[4246]	8	!
[4646]	9	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
	10	! implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
	11	! Public License for more details.
[4246]	12	!
[4646]	13	! You should have received a copy of the GNU General Public License along with PALM. If not, see
	14	! <http://www.gnu.org/licenses/>.
[4246]	15	!
[4481]	16	! Copyright 2018-2020 Leibniz Universitaet Hannover
	17	! Copyright 2018-2020 Hochschule Offenburg
[4646]	18	!--------------------------------------------------------------------------------------------------!
[4246]	19	!
	20	! Current revisions:
	21	! -----------------
[4646]	22	!
	23	!
[4246]	24	! Former revisions:
	25	! -----------------
	26	! $Id: indoor_model_mod.f90 4671 2020-09-09 20:27:58Z pavelkrc $
[4671]	27	! Implementation of downward facing USM and LSM surfaces
	28	!
	29	! 4646 2020-08-24 16:02:40Z raasch
[4646]	30	! file re-formatted to follow the PALM coding standard
	31	!
	32	! 4481 2020-03-31 18:55:54Z maronga
	33	! Change order of dimension in surface array %frac to allow for better vectorization.
	34	!
[4442]	35	! 4441 2020-03-04 19:20:35Z suehring
[4646]	36	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly calculated
	37	! leading to unrealistically high energy demands and thus to unreallistically high waste-heat
	38	! fluxes.
	39	!
[4402]	40	! 4346 2019-12-18 11:55:56Z motisi
[4646]	41	! Introduction of wall_flags_total_0, which currently sets bits based on static topography
	42	! information used in wall_flags_static_0
	43	!
[4346]	44	! 4329 2019-12-10 15:46:36Z motisi
[4329]	45	! Renamed wall_flags_0 to wall_flags_static_0
[4646]	46	!
[4329]	47	! 4310 2019-11-26 19:01:28Z suehring
[4646]	48	! Remove dt_indoor from namelist input. The indoor model is an hourly-based model, calling it
	49	! more/less often lead to inaccurate results.
	50	!
[4310]	51	! 4299 2019-11-22 10:13:38Z suehring
[4646]	52	! Output of indoor temperature revised (to avoid non-defined values within buildings)
	53	!
[4299]	54	! 4267 2019-10-16 18:58:49Z suehring
[4267]	55	! Bugfix in initialization, some indices to access building_pars where wrong.
	56	! Introduction of seasonal parameters.
[4646]	57	!
[4267]	58	! 4246 2019-09-30 09:27:52Z pavelkrc
[4646]	59	!
	60	!
[4245]	61	! 4242 2019-09-27 12:59:10Z suehring
[4246]	62	! Bugfix in array index
[4646]	63	!
[4246]	64	! 4238 2019-09-25 16:06:01Z suehring
	65	! - Bugfix in determination of minimum facade height and in location message
	66	! - Bugfix, avoid division by zero
[4646]	67	! - Some optimization
	68	!
[4246]	69	! 4227 2019-09-10 18:04:34Z gronemeier
	70	! implement new palm_date_time_mod
	71	!
	72	! 4217 2019-09-04 09:47:05Z scharf
	73	! Corrected "Former revisions" section
	74	!
	75	! 4209 2019-09-02 12:00:03Z suehring
	76	! - Bugfix in initialization of indoor temperature
[4646]	77	! - Prescibe default indoor temperature in case it is not given in the namelist input
[4246]	78	!
	79	! 4182 2019-08-21 14:37:54Z scharf
	80	! Corrected "Former revisions" section
[4646]	81	!
[4246]	82	! 4148 2019-08-08 11:26:00Z suehring
[4646]	83	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing is now considered at
	84	! the correct level.
[4246]	85	! - change calculation of a_m and c_m
	86	! - change calculation of u-values (use h_es in building array)
	87	! - rename h_tr_... to h_t_...
	88	! h_tr_em to h_t_wm
	89	! h_tr_op to h_t_wall
	90	! h_tr_w to h_t_es
	91	! - rename h_ve to h_v
	92	! - rename h_is to h_ms
	93	! - inserted net_floor_area
	94	! - inserted params_waste_heat_h, params_waste_heat_c from building database
	95	! in building array
	96	! - change calculation of q_waste_heat
[4646]	97	! - bugfix in averaging mean indoor temperature
	98	!
[4246]	99	! 3759 2019-02-21 15:53:45Z suehring
	100	! - Calculation of total building volume
	101	! - Several bugfixes
	102	! - Calculation of building height revised
[4646]	103	!
[4246]	104	! 3745 2019-02-15 18:57:56Z suehring
	105	! - remove building_type from module
[4646]	106	! - initialize parameters for each building individually instead of a bulk initializaion with
	107	! identical building type for all
[4246]	108	! - output revised
	109	! - add missing _wp
	110	! - some restructuring of variables in building data structure
[4646]	111	!
[4246]	112	! 3744 2019-02-15 18:38:58Z suehring
	113	! Some interface calls moved to module_interface + cleanup
[4646]	114	!
[4246]	115	! 3469 2018-10-30 20:05:07Z kanani
	116	! Initial revision (tlang, suehring, kanani, srissman)!
	117	!
	118	! Authors:
	119	! --------
	120	! @author Tobias Lang
	121	! @author Jens Pfafferott
	122	! @author Farah Kanani-Suehring
	123	! @author Matthias Suehring
	124	! @author Sascha RiÃmann
	125	!
	126	!
	127	! Description:
	128	! ------------
	129	!> Module for Indoor Climate Model (ICM)
	130	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
	131	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
[4646]	132	!> This module differs between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine
	133	!> thermal comfort
	134	!> the heat transfer between indoor and outdoor is simplified
[4246]	135
[4646]	136	!> @todo Many statement comments that are given as doxygen comments need to be changed to normal comments
[4246]	137	!> @todo Replace window_area_per_facade by %frac(1,m) for window
[4646]	138	!> @todo emissivity change for window blinds if solar_protection_on=1
[4246]	139
	140	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
	141	!> @note How to write indoor temperature output to pt array?
	142	!>
	143	!> @bug <Enter known bugs here>
[4646]	144	!--------------------------------------------------------------------------------------------------!
	145	MODULE indoor_model_mod
[4246]	146
[4646]	147	USE arrays_3d, &
	148	ONLY: ddzw, &
	149	dzw, &
[4402]	150	pt
	151
[4646]	152	USE control_parameters, &
[4246]	153	ONLY: initializing_actions
	154
	155	USE kinds
[4646]	156
	157	USE netcdf_data_input_mod, &
[4246]	158	ONLY: building_id_f, building_type_f
	159
[4646]	160	USE palm_date_time_mod, &
	161	ONLY: get_date_time, northward_equinox, seconds_per_hour, southward_equinox
[4267]	162
[4646]	163	USE surface_mod, &
[4246]	164	ONLY: surf_usm_h, surf_usm_v
	165
	166
	167	IMPLICIT NONE
	168
	169	!
	170	!-- Define data structure for buidlings.
	171	TYPE build
	172
	173	INTEGER(iwp) :: id !< building ID
[4646]	174	INTEGER(iwp) :: kb_max !< highest vertical index of a building
[4246]	175	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
	176	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
	177	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
	178	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
	179	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
	180	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
	181
	182	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
[4646]	183	!< for vertical surfaces with building
[4246]	184	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
	185	!< horizontal surfaces with building
[4646]	186	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
[4246]	187	!< vertical surfaces with building
[4646]	188	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
[4246]	189	!< and height level
	190	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
	191	!< and height level
	192
[4646]	193
[4246]	194	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
[4646]	195
[4246]	196	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
	197	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
	198	REAL(wp) :: area_facade !< [m2] area of total facade
	199	REAL(wp) :: building_height !< building height
	200	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
	201	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
	202	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
[4646]	203	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
[4246]	204	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
	205	REAL(wp) :: f_c_win !< [-] shading factor
[4402]	206	REAL(wp) :: fapf !< [m2/m2] floor area per facade
[4246]	207	REAL(wp) :: g_value_win !< [-] SHGC factor
[4646]	208	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
[4246]	209	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
	210	REAL(wp) :: height_storey !< [m] storey heigth
	211	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
[4646]	212	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with
	213	!< eta = 0.9 or -2 for WP with COP = 3
[4246]	214	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
	215	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
	216	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
	217	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
	218	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
	219	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
	220	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
	221	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
	222	REAL(wp) :: net_floor_area !< [m2] netto ground area
	223	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
	224	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
	225	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
	226	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
	227	REAL(wp) :: vol_tot !< [m3] total building volume
	228
	229	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
	230	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
	231	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
	232	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
	233	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
[4646]	234
[4246]	235	END TYPE build
	236
	237	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
	238
	239	INTEGER(iwp) :: num_build !< total number of buildings in domain
	240	!
	241	!-- Declare all global variables within the module
[4646]	242
	243	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to
	244	!< 3600.0 due to model requirements
	245	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	246	!< surface and air (chap. 7.2.2.2)
	247	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	248	!< component and surface (chap. 12.2.2)
	249	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly
	250	!< cooling 2.0_wp
	251	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
	252	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
	253	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
	254	!< Datenbank 27 window_area_per_facade_percent
	255	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
	256	!< on facade exceeds this value
	257
[4246]	258	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
	259	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
	260	INTEGER(iwp) :: solar_protection_off !< Solar protection off
	261	INTEGER(iwp) :: solar_protection_on !< Solar protection on
	262
[4310]	263
[4246]	264	REAL(wp) :: a_m !< [m2] the effective mass-related area
	265	REAL(wp) :: air_change !< [1/h] Airflow
	266	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
	267	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
	268	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
	269	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
	270	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
[4646]	271	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
	272	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
	273	!< glazed walls (assumption: thermal mass=0)
[4246]	274	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
	275	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
	276	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
	277	!< thermal mass) contains of h_t_wm and h_t_ms
[4646]	278	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the
	279	!< thermal mass)
[4246]	280	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
	281	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
	282	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
	283	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
	284	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
[4646]	285	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
[4246]	286	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
	287	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
[4646]	288	!< reach the demanded required temperature (heating is positive,
	289	!< cooling is negative)
[4246]	290	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
	291	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
	292	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
	293	REAL(wp) :: phi_sol !< [W] solar loads
[4646]	294	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
[4246]	295	REAL(wp) :: q_wall_win !< [W/m2]heat flux from indoor into wall/window
	296	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
[4646]	297
[4246]	298	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
	299	!< and external heatsources (for energy bilanz)
[4646]	300	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non
	301	!< thermal mass (for energy bilanz)
[4246]	302	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
	303	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
	304	REAL(wp) :: q_trans !< [W] Energy of transmission (for energy bilanz)
	305	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
[4646]	306
[4246]	307	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
	308	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
	309	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
	310	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
[4646]	311	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
[4246]	312	!< of 10 W/m2
	313	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
	314	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
	315	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
	316	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature timestep
	317	REAL(wp) :: theta_m_t_prev !< [degree_C] (Fictive) component temperature previous timestep (do not change)
	318	REAL(wp) :: theta_op !< [degree_C] operative temperature
	319	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
	320	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
	321	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
	322	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
[4646]	323
[4267]	324	!
	325	!-- Definition of seasonal parameters, summer and winter, for different building types
[4646]	326	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
	327	0.5_wp, & ! basical airflow without occupancy of the room
	328	2.0_wp, & ! additional airflow depend of occupancy of the room
	329	0.5_wp, & ! building_type 2: basical airflow without occupancy
	330	! of the room
	331	2.0_wp, & ! additional airflow depend of occupancy of the room
	332	0.8_wp, & ! building_type 3: basical airflow without occupancy
	333	! of the room
	334	2.0_wp, & ! additional airflow depend of occupancy of the room
	335	0.1_wp, & ! building_type 4: basical airflow without occupancy
	336	! of the room
	337	1.5_wp, & ! additional airflow depend of occupancy of the room
	338	0.1_wp, & ! building_type 5: basical airflow without occupancy
	339	! of the room
	340	1.5_wp, & ! additional airflow depend of occupancy of the room
	341	0.1_wp, & ! building_type 6: basical airflow without occupancy
	342	! of the room
	343	1.5_wp, & ! additional airflow depend of occupancy of the room
	344	0.1_wp, & ! building_type 7: basical airflow without occupancy
	345	! of the room
	346	1.5_wp & ! additional airflow depend of occupancy of the room
[4267]	347	/), (/ 2, 7 /) )
[4246]	348
[4646]	349	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
	350	0.1_wp, & ! basical airflow without occupancy of the room
	351	0.5_wp, & ! additional airflow depend of occupancy of the room
	352	0.1_wp, & ! building_type 2: basical airflow without occupancy
	353	! of the room
	354	0.5_wp, & ! additional airflow depend of occupancy of the room
	355	0.1_wp, & ! building_type 3: basical airflow without occupancy
	356	! of the room
	357	0.5_wp, & ! additional airflow depend of occupancy of the room
	358	0.1_wp, & ! building_type 4: basical airflow without occupancy
	359	! of the room
	360	1.5_wp, & ! additional airflow depend of occupancy of the room
	361	0.1_wp, & ! building_type 5: basical airflow without occupancy
	362	! of the room
	363	1.5_wp, & ! additional airflow depend of occupancy of the room
	364	0.1_wp, & ! building_type 6: basical airflow without occupancy
	365	! of the room
	366	1.5_wp, & ! additional airflow depend of occupancy of the room
	367	0.1_wp, & ! building_type 7: basical airflow without occupancy
	368	! of the room
	369	1.5_wp & ! additional airflow depend of occupancy of the room
[4267]	370	/), (/ 2, 7 /) )
	371
[4246]	372	SAVE
	373
	374
	375	PRIVATE
[4646]	376
[4246]	377	!
	378	!-- Add INTERFACES that must be available to other modules
[4646]	379	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, im_check_data_output, &
	380	im_data_output_3d, im_check_parameters
[4246]	381
[4646]	382
[4246]	383	!
	384	!-- Add VARIABLES that must be available to other modules
	385	PUBLIC dt_indoor, skip_time_do_indoor, time_indoor
	386
	387	!
	388	!-- PALM interfaces:
	389	!-- Data output checks for 2D/3D data to be done in check_parameters
	390	INTERFACE im_check_data_output
	391	MODULE PROCEDURE im_check_data_output
	392	END INTERFACE im_check_data_output
	393	!
	394	!-- Input parameter checks to be done in check_parameters
	395	INTERFACE im_check_parameters
	396	MODULE PROCEDURE im_check_parameters
	397	END INTERFACE im_check_parameters
	398	!
	399	!-- Data output of 3D data
	400	INTERFACE im_data_output_3d
	401	MODULE PROCEDURE im_data_output_3d
	402	END INTERFACE im_data_output_3d
	403
	404	!
	405	!-- Definition of data output quantities
	406	INTERFACE im_define_netcdf_grid
	407	MODULE PROCEDURE im_define_netcdf_grid
	408	END INTERFACE im_define_netcdf_grid
[4646]	409	!
[4246]	410	! !
	411	! !-- Output of information to the header file
	412	! INTERFACE im_header
	413	! MODULE PROCEDURE im_header
	414	! END INTERFACE im_header
	415	!
[4646]	416	!-- Calculations for indoor temperatures
[4246]	417	INTERFACE im_calc_temperatures
	418	MODULE PROCEDURE im_calc_temperatures
	419	END INTERFACE im_calc_temperatures
	420	!
[4646]	421	!-- Initialization actions
[4246]	422	INTERFACE im_init
	423	MODULE PROCEDURE im_init
	424	END INTERFACE im_init
	425	!
[4646]	426	!-- Main part of indoor model
[4246]	427	INTERFACE im_main_heatcool
	428	MODULE PROCEDURE im_main_heatcool
	429	END INTERFACE im_main_heatcool
	430	!
	431	!-- Reading of NAMELIST parameters
	432	INTERFACE im_parin
	433	MODULE PROCEDURE im_parin
	434	END INTERFACE im_parin
	435
	436	CONTAINS
	437
[4646]	438	!--------------------------------------------------------------------------------------------------!
[4246]	439	! Description:
	440	! ------------
[4646]	441	!< Calculation of the air temperatures and mean radiation temperature.
	442	!< This is basis for the operative temperature.
	443	!< Based on a Crank-Nicholson scheme with a timestep of a hour.
	444	!--------------------------------------------------------------------------------------------------!
	445	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
[4246]	446	near_facade_temperature, phi_hc_nd_dummy )
[4402]	447
[4246]	448	INTEGER(iwp) :: i
	449	INTEGER(iwp) :: j
	450	INTEGER(iwp) :: k
[4646]	451
[4246]	452	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	453	REAL(wp) :: near_facade_temperature
	454	REAL(wp) :: phi_hc_nd_dummy
	455	!
	456	!-- Calculation of total mass specific thermal load (internal and external)
[4646]	457	phi_mtot = ( phi_m + h_t_wm * indoor_wall_window_temperature &
	458	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
	459	+ h_t_1 * &
	460	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	461	+ near_facade_temperature ) &
	462	) / h_t_2 &
[4246]	463	) !< [degree_C] Eq. (C.5)
[4646]	464	!
[4246]	465	!-- Calculation of component temperature at factual timestep
[4646]	466	theta_m_t = ( ( theta_m_t_prev &
	467	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
	468	+ phi_mtot &
	469	) &
	470	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
[4246]	471	) !< [degree_C] Eq. (C.4)
	472	!
	473	!-- Calculation of mean inner temperature for the RC-node in actual timestep
	474	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
[4646]	475
[4246]	476	!
	477	!-- Calculation of mean surface temperature of the RC-node in actual timestep
[4646]	478	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
	479	+ h_t_1 * ( near_facade_temperature &
	480	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	481	) &
	482	/ ( h_t_ms + h_t_es + h_t_1 ) &
[4246]	483	) !< [degree_C] Eq. (C.10)
[4646]	484
[4246]	485	!
	486	!-- Calculation of the air temperature of the RC-node
[4646]	487	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature + phi_ia + phi_hc_nd_dummy ) / &
	488	( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
[4246]	489
	490	END SUBROUTINE im_calc_temperatures
	491
[4646]	492
	493	!--------------------------------------------------------------------------------------------------!
[4246]	494	! Description:
	495	! ------------
	496	!> Initialization of the indoor model.
[4646]	497	!> Static information are calculated here, e.g. building parameters and geometrical information,
	498	!> anything that doesn't change in time.
[4246]	499	!
	500	!-- Input values
	501	!-- Input datas from Palm, M4
	502	! i_global --> net_sw_in !< global radiation [W/m2]
	503	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
	504	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
[4646]	505	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from
	506	!< 1. Palm volume
[4246]	507	! theta_node --> t_wall_h(nzt_wall,m)
	508	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
[4646]	509	!--------------------------------------------------------------------------------------------------!
[4246]	510	SUBROUTINE im_init
	511
[4646]	512	USE control_parameters, &
[4267]	513	ONLY: message_string, time_since_reference_point
[4246]	514
[4646]	515	USE indices, &
[4346]	516	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
[4246]	517
[4646]	518	USE grid_variables, &
[4246]	519	ONLY: dx, dy
	520
	521	USE pegrid
	522
[4646]	523	USE surface_mod, &
[4246]	524	ONLY: surf_usm_h, surf_usm_v
[4646]	525
	526	USE urban_surface_mod, &
[4246]	527	ONLY: building_pars, building_type
	528
[4267]	529	INTEGER(iwp) :: bt !< local building type
	530	INTEGER(iwp) :: day_of_year !< day of the year
	531	INTEGER(iwp) :: i !< running index along x-direction
	532	INTEGER(iwp) :: j !< running index along y-direction
	533	INTEGER(iwp) :: k !< running index along z-direction
	534	INTEGER(iwp) :: l !< running index for surface-element orientation
	535	INTEGER(iwp) :: m !< running index surface elements
	536	INTEGER(iwp) :: n !< building index
	537	INTEGER(iwp) :: nb !< building index
[4246]	538
	539	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
[4646]	540	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
	541	!< multiple occurences are sorted out
[4246]	542	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	543	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	544	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	545	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
	546	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
	547	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
	548	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
[4646]	549	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
[4246]	550	!< horizontal facade elements
[4646]	551	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
[4246]	552	!< vertical facade elements
[4646]	553	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
	554	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
	555
[4246]	556	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	557	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
[4646]	558
[4246]	559	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
	560	REAL(wp) :: du_tmp !< 1/u_tmp
	561	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
	562	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
	563
	564	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
	565	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
	566	!< on local subdomain
	567
	568	CALL location_message( 'initializing indoor model', 'start' )
	569	!
[4646]	570	!-- Initializing of indoor model is only possible if buildings can be distinguished by their IDs.
[4246]	571	IF ( .NOT. building_id_f%from_file ) THEN
	572	message_string = 'Indoor model requires information about building_id'
	573	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
	574	ENDIF
	575	!
	576	!-- Determine number of different building IDs on local subdomain.
	577	num_buildings_l = 0
	578	num_buildings = 0
	579	ALLOCATE( build_ids_l(1) )
	580	DO i = nxl, nxr
	581	DO j = nys, nyn
	582	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	583	IF ( num_buildings_l(myid) > 0 ) THEN
[4646]	584	IF ( ANY( building_id_f%var(j,i) == build_ids_l ) ) THEN
[4246]	585	CYCLE
	586	ELSE
	587	num_buildings_l(myid) = num_buildings_l(myid) + 1
	588	!
	589	!-- Resize array with different local building ids
	590	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	591	build_ids_l_tmp = build_ids_l
	592	DEALLOCATE( build_ids_l )
	593	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
[4646]	594	build_ids_l(1:num_buildings_l(myid)-1) = &
	595	build_ids_l_tmp(1:num_buildings_l(myid)-1)
[4246]	596	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	597	DEALLOCATE( build_ids_l_tmp )
	598	ENDIF
	599	!
[4646]	600	!-- First occuring building id on PE
	601	ELSE
[4246]	602	num_buildings_l(myid) = num_buildings_l(myid) + 1
	603	build_ids_l(1) = building_id_f%var(j,i)
	604	ENDIF
	605	ENDIF
	606	ENDDO
	607	ENDDO
	608	!
[4646]	609	!-- Determine number of building IDs for the entire domain. (Note, building IDs can appear multiple
	610	!-- times as buildings might be distributed over several PEs.)
	611	#if defined( __parallel )
	612	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, MPI_INTEGER, MPI_SUM, comm2d, &
	613	ierr )
[4246]	614	#else
	615	num_buildings = num_buildings_l
	616	#endif
	617	ALLOCATE( build_ids(1:SUM(num_buildings)) )
	618	!
[4646]	619	!-- Gather building IDs. Therefore, first, determine displacements used required for MPI_GATHERV
	620	!-- call.
[4246]	621	ALLOCATE( displace_dum(0:numprocs-1) )
	622	displace_dum(0) = 0
	623	DO i = 1, numprocs-1
	624	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	625	ENDDO
	626
[4646]	627	#if defined( __parallel )
	628	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
	629	num_buildings(myid), &
	630	MPI_INTEGER, &
	631	build_ids, &
	632	num_buildings, &
	633	displace_dum, &
	634	MPI_INTEGER, &
	635	comm2d, ierr )
[4246]	636
	637	DEALLOCATE( displace_dum )
	638
	639	#else
	640	build_ids = build_ids_l
	641	#endif
	642	!
[4646]	643	!-- Note: in parallel mode, building IDs can occur mutliple times, as each PE has send its own ids.
	644	!-- Therefore, sort out building IDs which appear multiple times.
[4246]	645	num_build = 0
	646	DO n = 1, SIZE(build_ids)
	647
	648	IF ( ALLOCATED(build_ids_final) ) THEN
	649	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
	650	CYCLE
	651	ELSE
	652	num_build = num_build + 1
	653	!
	654	!-- Resize
	655	ALLOCATE( build_ids_final_tmp(1:num_build) )
	656	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	657	DEALLOCATE( build_ids_final )
	658	ALLOCATE( build_ids_final(1:num_build) )
	659	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	660	build_ids_final(num_build) = build_ids(n)
	661	DEALLOCATE( build_ids_final_tmp )
[4646]	662	ENDIF
[4246]	663	ELSE
	664	num_build = num_build + 1
	665	ALLOCATE( build_ids_final(1:num_build) )
	666	build_ids_final(num_build) = build_ids(n)
	667	ENDIF
	668	ENDDO
	669
	670	!
[4646]	671	!-- Allocate building-data structure array. Note, this is a global array and all building IDs on
	672	!-- domain are known by each PE. Further attributes, e.g. height-dependent arrays, however, are only
	673	!-- allocated on PEs where the respective building is present (in order to reduce memory demands).
[4246]	674	ALLOCATE( buildings(1:num_build) )
	675
	676	!
[4646]	677	!-- Store building IDs and check if building with certain ID is present on subdomain.
[4246]	678	DO nb = 1, num_build
	679	buildings(nb)%id = build_ids_final(nb)
	680
[4646]	681	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
[4246]	682	buildings(nb)%on_pe = .TRUE.
[4646]	683	ENDDO
[4246]	684	!
[4646]	685	!-- Determine the maximum vertical dimension occupied by each building.
[4246]	686	ALLOCATE( k_min_l(1:num_build) )
	687	ALLOCATE( k_max_l(1:num_build) )
	688	k_min_l = nzt + 1
[4646]	689	k_max_l = 0
[4246]	690
	691	DO i = nxl, nxr
	692	DO j = nys, nyn
	693	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	694	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	695	DO k = nzb, nzt+1
	696	!
[4646]	697	!-- Check if grid point belongs to a building.
[4346]	698	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
[4246]	699	k_min_l(nb) = MIN( k_min_l(nb), k )
	700	k_max_l(nb) = MAX( k_max_l(nb), k )
	701	ENDIF
	702
	703	ENDDO
	704	ENDIF
	705	ENDDO
	706	ENDDO
	707
[4646]	708	#if defined( __parallel )
	709	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, MPI_INTEGER, MPI_MIN, comm2d, &
	710	ierr )
	711	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, MPI_INTEGER, MPI_MAX, comm2d, &
	712	ierr )
[4246]	713	#else
	714	buildings(:)%kb_min = k_min_l(:)
	715	buildings(:)%kb_max = k_max_l(:)
	716	#endif
	717
	718	DEALLOCATE( k_min_l )
	719	DEALLOCATE( k_max_l )
	720	!
	721	!-- Calculate building height.
	722	DO nb = 1, num_build
	723	buildings(nb)%building_height = 0.0_wp
	724	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	725	buildings(nb)%building_height = buildings(nb)%building_height + dzw(k+1)
[4246]	726	ENDDO
	727	ENDDO
	728	!
	729	!-- Calculate building volume
	730	DO nb = 1, num_build
	731	!
	732	!-- Allocate temporary array for summing-up building volume
	733	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	734	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	735	volume = 0.0_wp
	736	volume_l = 0.0_wp
	737	!
[4646]	738	!-- Calculate building volume per height level on each PE where these building is present.
[4246]	739	IF ( buildings(nb)%on_pe ) THEN
	740
	741	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	742	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	743	buildings(nb)%volume = 0.0_wp
	744	buildings(nb)%vol_frac = 0.0_wp
[4646]	745
	746	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) THEN
[4246]	747	DO i = nxl, nxr
	748	DO j = nys, nyn
	749	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	750	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
[4246]	751	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
	752	ENDDO
	753	ENDDO
	754	ENDDO
	755	ENDIF
	756	ENDIF
	757	!
	758	!-- Sum-up building volume from all subdomains
[4646]	759	#if defined( __parallel )
	760	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, comm2d, ierr )
[4246]	761	#else
	762	volume = volume_l
	763	#endif
	764	!
[4646]	765	!-- Save total building volume as well as local fraction on volume on building data structure.
[4246]	766	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
	767	!
	768	!-- Determine fraction of local on total building volume
	769	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
	770	!
	771	!-- Calculate total building volume
[4646]	772	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
[4246]	773
	774	DEALLOCATE( volume )
	775	DEALLOCATE( volume_l )
	776
	777	ENDDO
	778	!
[4646]	779	!-- Allocate arrays for indoor temperature.
[4246]	780	DO nb = 1, num_build
	781	IF ( buildings(nb)%on_pe ) THEN
	782	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	783	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	784	buildings(nb)%t_in = 0.0_wp
	785	buildings(nb)%t_in_l = 0.0_wp
	786	ENDIF
	787	ENDDO
	788	!
[4646]	789	!-- Allocate arrays for number of facades per height level. Distinguish between horizontal and
	790	!-- vertical facades.
[4246]	791	DO nb = 1, num_build
	792	IF ( buildings(nb)%on_pe ) THEN
	793	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	794	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	795
	796	buildings(nb)%num_facade_h = 0
	797	buildings(nb)%num_facade_v = 0
	798	ENDIF
	799	ENDDO
	800	!
	801	!-- Determine number of facade elements per building on local subdomain.
	802	!-- Distinguish between horizontal and vertical facade elements.
	803	!
	804	!-- Horizontal facades
	805	buildings(:)%num_facades_per_building_h_l = 0
[4671]	806	DO l = 0, 1
	807	DO m = 1, surf_usm_h(l)%ns
[4246]	808	!
[4671]	809	!-- For the current facade element determine corresponding building index.
	810	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	811	!-- element and building location (for horizontal surface elements the horizontal offsets are
	812	!-- zero).
	813	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	814	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
	815	k = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4246]	816	!
[4671]	817	!-- Determine building index and check whether building is on PE.
	818	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	819
[4671]	820	IF ( buildings(nb)%on_pe ) THEN
[4246]	821	!
[4671]	822	!-- Count number of facade elements at each height level.
	823	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
[4246]	824	!
[4671]	825	!-- Moreover, sum up number of local facade elements per building.
	826	buildings(nb)%num_facades_per_building_h_l = &
[4646]	827	buildings(nb)%num_facades_per_building_h_l + 1
[4671]	828	ENDIF
	829	ENDDO
[4246]	830	ENDDO
	831	!
	832	!-- Vertical facades
	833	buildings(:)%num_facades_per_building_v_l = 0
	834	DO l = 0, 3
	835	DO m = 1, surf_usm_v(l)%ns
	836	!
	837	!-- For the current facade element determine corresponding building index.
[4646]	838	!-- First, obtain j,j,k indices of the building. Please note the offset between facade/surface
	839	!-- element and building location (for vertical surface elements the vertical offsets are
	840	!-- zero).
[4246]	841	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	842	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	843	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	844
[4646]	845	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	846	IF ( buildings(nb)%on_pe ) THEN
[4646]	847	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
	848	buildings(nb)%num_facades_per_building_v_l = &
	849	buildings(nb)%num_facades_per_building_v_l + 1
[4246]	850	ENDIF
	851	ENDDO
	852	ENDDO
	853	!
[4646]	854	!-- Determine total number of facade elements per building and assign number to building data type.
[4246]	855	DO nb = 1, num_build
	856	!
[4646]	857	!-- Allocate dummy array used for summing-up facade elements.
	858	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	859	!-- allocated on all PEs.
[4246]	860	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	861	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	862	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	863	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	864	num_facades_h = 0
	865	num_facades_v = 0
	866	receive_dum_h = 0
	867	receive_dum_v = 0
	868
	869	IF ( buildings(nb)%on_pe ) THEN
	870	num_facades_h = buildings(nb)%num_facade_h
	871	num_facades_v = buildings(nb)%num_facade_v
	872	ENDIF
	873
[4646]	874	#if defined( __parallel )
	875	CALL MPI_ALLREDUCE( num_facades_h, &
	876	receive_dum_h, &
	877	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	878	MPI_INTEGER, &
	879	MPI_SUM, &
	880	comm2d, &
[4246]	881	ierr )
	882
[4646]	883	CALL MPI_ALLREDUCE( num_facades_v, &
	884	receive_dum_v, &
	885	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	886	MPI_INTEGER, &
	887	MPI_SUM, &
	888	comm2d, &
[4246]	889	ierr )
[4646]	890	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) buildings(nb)%num_facade_h = receive_dum_h
	891	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) buildings(nb)%num_facade_v = receive_dum_v
[4246]	892	#else
	893	buildings(nb)%num_facade_h = num_facades_h
	894	buildings(nb)%num_facade_v = num_facades_v
	895	#endif
	896
	897	!
	898	!-- Deallocate dummy arrays
	899	DEALLOCATE( num_facades_h )
	900	DEALLOCATE( num_facades_v )
	901	DEALLOCATE( receive_dum_h )
	902	DEALLOCATE( receive_dum_v )
	903	!
	904	!-- Allocate index arrays which link facade elements with surface-data type.
[4646]	905	!-- Please note, no height levels are considered here (information is stored in surface-data type
	906	!-- itself).
[4246]	907	IF ( buildings(nb)%on_pe ) THEN
	908	!
	909	!-- Determine number of facade elements per building.
	910	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
	911	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
	912	!
[4646]	913	!-- Allocate arrays which link the building with the horizontal and vertical urban-type
	914	!-- surfaces. Please note, linking arrays are allocated over all facade elements, which is
	915	!-- required in case a building is located at the subdomain boundaries, where the building and
	916	!-- the corresponding surface elements are located on different subdomains.
[4246]	917	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
	918
	919	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
	920	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
	921	ENDIF
[4402]	922
[4246]	923	IF ( buildings(nb)%on_pe ) THEN
	924	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	925	buildings(nb)%vpf = 0.0_wp
[4402]	926
[4646]	927	facade_area_v = 0.0_wp
[4246]	928	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	929	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) * dzw(k+1) * dx
[4246]	930	ENDDO
[4402]	931	!
[4646]	932	!-- Determine volume per total facade area (vpf). For the horizontal facade area
	933	!-- num_facades_per_building_h can be taken, multiplied with dx*dy.
	934	!-- However, due to grid stretching, vertical facade elements must be summed-up vertically.
	935	!-- Please note, if dx /= dy, an error is made!
	936	buildings(nb)%vpf = buildings(nb)%vol_tot / &
	937	( buildings(nb)%num_facades_per_building_h * dx * dy + facade_area_v )
[4402]	938	!
	939	!-- Determine floor-area-per-facade.
[4646]	940	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h * dx * dy &
	941	/ ( buildings(nb)%num_facades_per_building_h * dx * dy &
	942	+ facade_area_v )
[4246]	943	ENDIF
	944	ENDDO
	945	!
[4646]	946	!-- Link facade elements with surface data type.
[4246]	947	!-- Allocate array for counting.
	948	ALLOCATE( n_fa(1:num_build) )
	949	n_fa = 1
	950
[4671]	951	DO l = 0, 1
	952	DO m = 1, surf_usm_h(l)%ns
	953	i = surf_usm_h(l)%i(m) + surf_usm_h(l)%ioff
	954	j = surf_usm_h(l)%j(m) + surf_usm_h(l)%joff
[4246]	955
[4671]	956	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	957
[4671]	958	IF ( buildings(nb)%on_pe ) THEN
	959	buildings(nb)%m_h(n_fa(nb)) = m
	960	n_fa(nb) = n_fa(nb) + 1
	961	ENDIF
	962	ENDDO
[4246]	963	ENDDO
	964
	965	n_fa = 1
	966	DO l = 0, 3
	967	DO m = 1, surf_usm_v(l)%ns
	968	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	969	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	970
[4646]	971	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	972
	973	IF ( buildings(nb)%on_pe ) THEN
	974	buildings(nb)%l_v(n_fa(nb)) = l
	975	buildings(nb)%m_v(n_fa(nb)) = m
[4646]	976	n_fa(nb) = n_fa(nb) + 1
[4246]	977	ENDIF
	978	ENDDO
	979	ENDDO
	980	DEALLOCATE( n_fa )
	981	!
[4646]	982	!-- Initialize building parameters, first by mean building type. Note, in this case all buildings
	983	!-- have the same type.
	984	!-- In a second step initialize with building tpyes from static input file, where building types can
	985	!-- be individual for each building.
[4267]	986	buildings(:)%lambda_layer3 = building_pars(31,building_type)
	987	buildings(:)%s_layer3 = building_pars(44,building_type)
[4246]	988	buildings(:)%f_c_win = building_pars(119,building_type)
[4646]	989	buildings(:)%g_value_win = building_pars(120,building_type)
	990	buildings(:)%u_value_win = building_pars(121,building_type)
	991	buildings(:)%eta_ve = building_pars(124,building_type)
	992	buildings(:)%factor_a = building_pars(125,building_type)
[4246]	993	buildings(:)%factor_c = building_pars(126,building_type)
[4646]	994	buildings(:)%lambda_at = building_pars(127,building_type)
	995	buildings(:)%theta_int_h_set = building_pars(13,building_type)
[4267]	996	buildings(:)%theta_int_c_set = building_pars(12,building_type)
[4646]	997	buildings(:)%q_h_max = building_pars(128,building_type)
	998	buildings(:)%q_c_max = building_pars(129,building_type)
[4246]	999	buildings(:)%qint_high = building_pars(130,building_type)
	1000	buildings(:)%qint_low = building_pars(131,building_type)
	1001	buildings(:)%height_storey = building_pars(132,building_type)
	1002	buildings(:)%height_cei_con = building_pars(133,building_type)
	1003	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
	1004	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
	1005	!
[4267]	1006	!-- Initialize seasonal dependent parameters, depending on day of the year.
[4646]	1007	!-- First, calculated day of the year.
[4267]	1008	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
	1009	!
[4646]	1010	!-- Summer is defined in between northward- and southward equinox.
	1011	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1012	buildings(:)%air_change_low = summer_pars(0,building_type)
[4267]	1013	buildings(:)%air_change_high = summer_pars(1,building_type)
	1014	ELSE
[4646]	1015	buildings(:)%air_change_low = winter_pars(0,building_type)
[4267]	1016	buildings(:)%air_change_high = winter_pars(1,building_type)
	1017	ENDIF
	1018	!
[4646]	1019	!-- Initialize ventilation load. Please note, building types > 7 are actually not allowed (check
	1020	!-- already in urban_surface_mod and netcdf_data_input_mod.
	1021	!-- However, the building data base may be later extended.
	1022	IF ( building_type == 1 .OR. building_type == 2 .OR. &
	1023	building_type == 3 .OR. building_type == 10 .OR. &
[4246]	1024	building_type == 11 .OR. building_type == 12 ) THEN
	1025	buildings(:)%ventilation_int_loads = 1
	1026	!
	1027	!-- Office, building with large windows
[4646]	1028	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
	1029	building_type == 6 .OR. building_type == 7 .OR. &
[4246]	1030	building_type == 8 .OR. building_type == 9) THEN
	1031	buildings(:)%ventilation_int_loads = 2
	1032	!
	1033	!-- Industry, hospitals
[4646]	1034	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
	1035	building_type == 15 .OR. building_type == 16 .OR. &
[4246]	1036	building_type == 17 .OR. building_type == 18 ) THEN
	1037	buildings(:)%ventilation_int_loads = 3
	1038	ENDIF
	1039	!
	1040	!-- Initialization of building parameters - level 2
	1041	IF ( building_type_f%from_file ) THEN
	1042	DO i = nxl, nxr
	1043	DO j = nys, nyn
	1044	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[4646]	1045	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1046	bt = building_type_f%var(j,i)
[4646]	1047
[4267]	1048	buildings(nb)%lambda_layer3 = building_pars(31,bt)
	1049	buildings(nb)%s_layer3 = building_pars(44,bt)
[4246]	1050	buildings(nb)%f_c_win = building_pars(119,bt)
[4646]	1051	buildings(nb)%g_value_win = building_pars(120,bt)
	1052	buildings(nb)%u_value_win = building_pars(121,bt)
	1053	buildings(nb)%eta_ve = building_pars(124,bt)
	1054	buildings(nb)%factor_a = building_pars(125,bt)
[4246]	1055	buildings(nb)%factor_c = building_pars(126,bt)
[4646]	1056	buildings(nb)%lambda_at = building_pars(127,bt)
	1057	buildings(nb)%theta_int_h_set = building_pars(13,bt)
[4267]	1058	buildings(nb)%theta_int_c_set = building_pars(12,bt)
[4646]	1059	buildings(nb)%q_h_max = building_pars(128,bt)
	1060	buildings(nb)%q_c_max = building_pars(129,bt)
[4246]	1061	buildings(nb)%qint_high = building_pars(130,bt)
	1062	buildings(nb)%qint_low = building_pars(131,bt)
	1063	buildings(nb)%height_storey = building_pars(132,bt)
[4646]	1064	buildings(nb)%height_cei_con = building_pars(133,bt)
[4246]	1065	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
	1066	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
[4267]	1067
[4646]	1068	IF ( day_of_year >= northward_equinox .AND. day_of_year <= southward_equinox ) THEN
	1069	buildings(nb)%air_change_low = summer_pars(0,bt)
[4267]	1070	buildings(nb)%air_change_high = summer_pars(1,bt)
	1071	ELSE
[4646]	1072	buildings(nb)%air_change_low = winter_pars(0,bt)
[4267]	1073	buildings(nb)%air_change_high = winter_pars(1,bt)
	1074	ENDIF
	1075
[4246]	1076	!
[4646]	1077	!-- Initialize ventilaation load. Please note, building types > 7
	1078	!-- are actually not allowed (check already in urban_surface_mod
	1079	!-- and netcdf_data_input_mod. However, the building data base may
	1080	!-- be later extended.
	1081	IF ( bt == 1 .OR. bt == 2 .OR. &
	1082	bt == 3 .OR. bt == 10 .OR. &
[4246]	1083	bt == 11 .OR. bt == 12 ) THEN
	1084	buildings(nb)%ventilation_int_loads = 1
[4646]	1085	!
[4246]	1086	!-- Office, building with large windows
[4646]	1087	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
	1088	bt == 6 .OR. bt == 7 .OR. &
[4246]	1089	bt == 8 .OR. bt == 9) THEN
	1090	buildings(nb)%ventilation_int_loads = 2
	1091	!
	1092	!-- Industry, hospitals
[4646]	1093	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
	1094	bt == 15 .OR. bt == 16 .OR. &
[4246]	1095	bt == 17 .OR. bt == 18 ) THEN
	1096	buildings(nb)%ventilation_int_loads = 3
	1097	ENDIF
	1098	ENDIF
	1099	ENDDO
	1100	ENDDO
	1101	ENDIF
	1102	!
[4646]	1103	!-- Calculation of surface-related heat transfer coeffiecient out of standard u-values from building
	1104	!-- database.
	1105	!-- Only amount of extern and surface is used.
	1106	!-- Otherwise amount between air and surface taken account twice.
[4246]	1107	DO nb = 1, num_build
[4646]	1108	IF ( buildings(nb)%on_pe ) THEN
[4246]	1109	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
[4646]	1110	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
[4246]	1111	0.125_wp + ( 1.0_wp / h_is ) ) )
[4646]	1112
[4246]	1113	du_tmp = 1.0_wp / u_tmp
[4646]	1114
[4267]	1115	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
	1116
[4246]	1117	ENDIF
	1118	ENDDO
	1119	!
	1120	!-- Initial room temperature [K]
	1121	!-- (after first loop, use theta_m_t as theta_m_t_prev)
	1122	theta_m_t_prev = initial_indoor_temperature
	1123	!
	1124	!-- Initialize indoor temperature. Actually only for output at initial state.
	1125	DO nb = 1, num_build
[4646]	1126	IF ( buildings(nb)%on_pe ) buildings(nb)%t_in(:) = initial_indoor_temperature
[4246]	1127	ENDDO
	1128
	1129	CALL location_message( 'initializing indoor model', 'finished' )
	1130
	1131	END SUBROUTINE im_init
	1132
	1133
[4646]	1134	!--------------------------------------------------------------------------------------------------!
[4246]	1135	! Description:
	1136	! ------------
	1137	!> Main part of the indoor model.
	1138	!> Calculation of .... (kanani: Please describe)
[4646]	1139	!--------------------------------------------------------------------------------------------------!
[4246]	1140	SUBROUTINE im_main_heatcool
	1141
	1142	! USE basic_constants_and_equations_mod, &
	1143	! ONLY: c_p
	1144
[4646]	1145	USE control_parameters, &
[4246]	1146	ONLY: time_since_reference_point
	1147
[4646]	1148	USE grid_variables, &
[4246]	1149	ONLY: dx, dy
	1150
	1151	USE pegrid
[4646]	1152
	1153	USE surface_mod, &
[4246]	1154	ONLY: ind_veg_wall, ind_wat_win, surf_usm_h, surf_usm_v
	1155
[4646]	1156	USE urban_surface_mod, &
	1157	ONLY: building_type, nzt_wall, t_wall_h, t_wall_v, t_window_h, t_window_v
[4246]	1158
[4646]	1159
	1160	INTEGER(iwp) :: fa !< running index for facade elements of each building
[4246]	1161	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
	1162	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
	1163	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
	1164	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
	1165	INTEGER(iwp) :: l !< running index for surface-element orientation
	1166	INTEGER(iwp) :: m !< running index surface elements
	1167	INTEGER(iwp) :: nb !< running index for buildings
	1168
	1169	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	1170	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
	1171	REAL(wp) :: second_of_day !< second of the current day
	1172	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
	1173
	1174	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
	1175	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
	1176	!
[4646]	1177	!-- Determine time of day in hours.
[4246]	1178	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
	1179	time_utc_hour = second_of_day / seconds_per_hour
	1180	!
	1181	!-- Following calculations must be done for each facade element.
	1182	DO nb = 1, num_build
	1183	!
[4646]	1184	!-- First, check whether building is present on local subdomain.
[4246]	1185	IF ( buildings(nb)%on_pe ) THEN
	1186	!
	1187	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
[4646]	1188	!-- Residental Building, panel WBS 70
[4246]	1189	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
[4267]	1190	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1191	schedule_d = 0
	1192	ELSE
[4246]	1193	schedule_d = 1
	1194	ENDIF
	1195	ENDIF
	1196	!
	1197	!-- Office, building with large windows
	1198	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
	1199	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1200	schedule_d = 1
	1201	ELSE
	1202	schedule_d = 0
	1203	ENDIF
	1204	ENDIF
[4646]	1205	!
[4246]	1206	!-- Industry, hospitals
	1207	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
	1208	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
	1209	schedule_d = 1
	1210	ELSE
	1211	schedule_d = 0
	1212	ENDIF
	1213	ENDIF
	1214	!
	1215	!-- Initialize/reset indoor temperature
[4646]	1216	buildings(nb)%t_in_l = 0.0_wp
[4246]	1217	!
	1218	!-- Horizontal surfaces
	1219	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1220	!
[4671]	1221	!-- Determine indices where corresponding surface-type information is stored.
	1222	l = buildings(nb)%l_v(fa)
	1223	m = buildings(nb)%m_v(fa)
[4246]	1224	!
[4646]	1225	!-- Determine building height level index.
[4671]	1226	kk = surf_usm_h(l)%k(m) + surf_usm_h(l)%koff
[4402]	1227	!
[4246]	1228	!-- Building geometries --> not time-dependent
[4646]	1229	facade_element_area = dx * dy !< [m2] surface area per facade element
[4402]	1230	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1231	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1232	buildings(nb)%area_facade = facade_element_area * &
	1233	( buildings(nb)%num_facades_per_building_h + &
	1234	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
[4671]	1235	window_area_per_facade = surf_usm_h(l)%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per facade
[4646]	1236	!< element
[4246]	1237
	1238	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1239	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1240	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1241	a_m = buildings(nb)%factor_a * total_area * &
	1242	( facade_element_area / buildings(nb)%area_facade ) * &
	1243	buildings(nb)%lambda_at !< [m2] standard values
	1244	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1245	c_m = buildings(nb)%factor_c * total_area * &
	1246	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1247	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1248	!
	1249	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1250	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1251
[4646]	1252	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1253	!< (m2 K) between surface and air, Eq. (9)
	1254	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1255	!< (m2 K) between component and surface, Eq. (64)
	1256	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1257	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1258	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
[4646]	1259	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63),
	1260	!< Section 12.2.2
[4246]	1261	!
[4646]	1262	!-- Internal air loads dependent on the occupacy of the room.
	1263	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int).
	1264	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1265	* floor_area_per_facade )
[4246]	1266	q_int = phi_ia / total_area
	1267	!
[4646]	1268	!-- Airflow dependent on the occupacy of the room.
	1269	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1270	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
[4246]	1271	!
[4646]	1272	!-- Heat transfer of ventilation.
	1273	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1274	!-- capacity of air 0.33 Wh/m2K.
	1275	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1276	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
[4246]	1277
	1278	!-- Heat transfer coefficient auxiliary variables
	1279	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1280	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1281	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1282	!
	1283	!-- Net short-wave radiation through window area (was i_global)
[4671]	1284	net_sw_in = surf_usm_h(l)%rad_sw_in(m) - surf_usm_h(l)%rad_sw_out(m)
[4246]	1285	!
	1286	!-- Quantities needed for im_calc_temperatures
[4671]	1287	i = surf_usm_h(l)%i(m)
	1288	j = surf_usm_h(l)%j(m)
	1289	k = surf_usm_h(l)%k(m)
	1290	near_facade_temperature = surf_usm_h(l)%pt_10cm(m)
	1291	indoor_wall_window_temperature = &
	1292	surf_usm_h(l)%frac(m,ind_veg_wall) * t_wall_h(l)%val(nzt_wall,m) &
	1293	+ surf_usm_h(l)%frac(m,ind_wat_win) * t_window_h(l)%val(nzt_wall,m)
[4246]	1294	!
[4646]	1295	!-- Solar thermal gains. If net_sw_in larger than sun-protection threshold parameter
	1296	!-- (params_solar_protection), sun protection will be activated.
	1297	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1298	solar_protection_off = 1
	1299	solar_protection_on = 0
[4646]	1300	ELSE
[4246]	1301	solar_protection_off = 0
	1302	solar_protection_on = 1
	1303	ENDIF
	1304	!
[4646]	1305	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1306	!-- automatic sun protection.
[4246]	1307	!-- DIN 4108 - 2 chap.8
[4646]	1308	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1309	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1310	solar_protection_on ) &
[4246]	1311	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
[4646]	1312	q_sol = phi_sol
[4246]	1313	!
[4646]	1314	!-- Calculation of the mass specific thermal load for internal and external heatsources of
	1315	!-- the inner node.
	1316	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with
	1317	!< phi_ia=0,5*phi_int
[4246]	1318	q_c_m = phi_m
	1319	!
[4646]	1320	!-- Calculation mass specific thermal load implied non thermal mass
	1321	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1322	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1323	!< phi_ia=0,5*phi_int
	1324	q_c_st = phi_st
[4246]	1325	!
	1326	!-- Calculations for deriving indoor temperature and heat flux into the wall
[4646]	1327	!-- Step 1: indoor temperature without heating and cooling
[4246]	1328	!-- section C.4.1 Picture C.2 zone 3)
	1329	phi_hc_nd = 0.0_wp
[4646]	1330
	1331	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1332	near_facade_temperature, phi_hc_nd )
[4246]	1333	!
[4646]	1334	!-- If air temperature between border temperatures of heating and cooling, assign output
	1335	!-- variable, then ready.
	1336	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1337	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1338	phi_hc_nd_ac = 0.0_wp
[4646]	1339	phi_hc_nd = phi_hc_nd_ac
[4246]	1340	theta_air_ac = theta_air
	1341	!
	1342	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1343	!-- again.
	1344	ELSE
	1345	!
	1346	!-- Temperature not correct, calculation method according to section C4.2
[4646]	1347	theta_air_0 = theta_air !< temperature without heating/cooling
[4246]	1348	!
	1349	!-- Heating or cooling?
	1350	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1351	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1352	ELSE
	1353	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1354	ENDIF
	1355	!
[4646]	1356	!-- Calculate the temperature with phi_hc_nd_10
[4246]	1357	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1358	phi_hc_nd = phi_hc_nd_10
[4646]	1359
	1360	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1361	near_facade_temperature, phi_hc_nd )
[4246]	1362	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
[4646]	1363	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
[4246]	1364	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
	1365	!
[4646]	1366	!-- Step 3: with temperature ratio to determine the heating or cooling capacity.
	1367	!-- If necessary, limit the power to maximum power.
[4246]	1368	!-- section C.4.1 Picture C.2 zone 2) and 4)
[4646]	1369	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
[4246]	1370	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1371	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1372	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1373	phi_hc_nd_ac = phi_hc_nd_un
[4646]	1374	phi_hc_nd = phi_hc_nd_un
[4246]	1375	ELSE
	1376	!
[4646]	1377	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1378	!-- (phi_hc_nd_un negative)
[4246]	1379	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1380	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1381	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1382	ELSE
[4246]	1383	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1384	ENDIF
	1385	ENDIF
[4646]	1386	phi_hc_nd = phi_hc_nd_ac
[4246]	1387	!
	1388	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4646]	1389	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1390	near_facade_temperature, phi_hc_nd )
[4246]	1391	theta_air_ac = theta_air
	1392	ENDIF
	1393	!
	1394	!-- Update theta_m_t_prev
	1395	theta_m_t_prev = theta_m_t
[4646]	1396
[4246]	1397	q_vent = h_v * ( theta_air - near_facade_temperature )
	1398	!
[4646]	1399	!-- Calculate the operating temperature with weighted mean temperature of air and mean
	1400	!-- solar temperature.
	1401	!-- Will be used for thermal comfort calculations.
[4246]	1402	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
[4671]	1403	! surf_usm_h(l)%t_indoor(m) = theta_op !< not integrated now
[4246]	1404	!
[4646]	1405	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1406	!-- calculate heat transfer through wall layers towards the facade
	1407	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
[4646]	1408	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
	1409	/ ( facade_element_area - window_area_per_facade )
	1410	q_trans = q_wall_win * facade_element_area
[4246]	1411	!
	1412	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
[4671]	1413	surf_usm_h(l)%iwghf_eb(m) = q_wall_win
	1414	surf_usm_h(l)%iwghf_eb_window(m) = q_wall_win
[4246]	1415	!
[4646]	1416	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1417	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1418	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1419	!
[4646]	1420	!-- Calculation of waste heat.
	1421	!-- Anthropogenic heat output.
	1422	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1423	heating_on = 1
	1424	cooling_on = 0
[4646]	1425	ELSE
[4246]	1426	heating_on = 0
	1427	cooling_on = -1
	1428	ENDIF
	1429
[4646]	1430	q_waste_heat = ( phi_hc_nd * ( &
	1431	buildings(nb)%params_waste_heat_h * heating_on + &
	1432	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1433	) / facade_element_area !< [W/m2] , observe the directional
	1434	!< convention in PALM!
[4671]	1435	surf_usm_h(l)%waste_heat(m) = q_waste_heat
[4246]	1436	ENDDO !< Horizontal surfaces loop
	1437	!
	1438	!-- Vertical surfaces
	1439	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1440	!
[4646]	1441	!-- Determine indices where corresponding surface-type information is stored.
[4246]	1442	l = buildings(nb)%l_v(fa)
	1443	m = buildings(nb)%m_v(fa)
	1444	!
[4646]	1445	!-- Determine building height level index.
[4246]	1446	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	1447	!
[4646]	1448	!-- (SOME OF THE FOLLOWING (not time-dependent) COULD PROBABLY GO INTO A FUNCTION
[4246]	1449	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
	1450	!-- Building geometries --> not time-dependent
[4402]	1451	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
	1452	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
	1453
	1454	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
[4646]	1455	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
	1456	buildings(nb)%area_facade = facade_element_area * &
	1457	( buildings(nb)%num_facades_per_building_h + &
	1458	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
	1459	window_area_per_facade = surf_usm_v(l)%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per
	1460	!< facade element
[4246]	1461
	1462	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
[4646]	1463	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces
	1464	!< pointing to zone Eq. (9) according to section 7.2.2.2
	1465	a_m = buildings(nb)%factor_a * total_area * &
	1466	( facade_element_area / buildings(nb)%area_facade ) * &
	1467	buildings(nb)%lambda_at !< [m2] standard values
	1468	!< according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
[4246]	1469	c_m = buildings(nb)%factor_c * total_area * &
[4646]	1470	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values
	1471	!< according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
[4246]	1472	!
	1473	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1474	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1475
[4646]	1476	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W /
	1477	!< (m2 K) between surface and air, Eq. (9)
	1478	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W /
	1479	!< (m2 K) between component and surface, Eq. (64)
	1480	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
[4246]	1481	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1482	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
	1483	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
	1484	!
[4646]	1485	!-- Internal air loads dependent on the occupacy of the room.
	1486	!-- Basical internal heat gains (qint_low) with additional internal heat gains by occupancy
	1487	!-- (qint_high) (0,5*phi_int)
	1488	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1489	* floor_area_per_facade )
[4246]	1490	q_int = phi_ia
	1491
	1492	!
[4646]	1493	!-- Airflow dependent on the occupacy of the room.
	1494	!-- Basical airflow (air_change_low) with additional airflow gains by occupancy
	1495	!-- (air_change_high)
	1496	air_change = ( buildings(nb)%air_change_high * schedule_d + &
	1497	buildings(nb)%air_change_low )
[4246]	1498	!
[4646]	1499	!-- Heat transfer of ventilation.
	1500	!-- Not less than 0.01 W/K to avoid division by 0 in further calculations with heat
	1501	!-- capacity of air 0.33 Wh/m2K
	1502	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1503	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789
	1504	!< Eq.(10)
	1505
[4246]	1506	!-- Heat transfer coefficient auxiliary variables
	1507	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1508	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1509	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1510	!
	1511	!-- Net short-wave radiation through window area (was i_global)
	1512	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
	1513	!
	1514	!-- Quantities needed for im_calc_temperatures
	1515	i = surf_usm_v(l)%i(m)
[4646]	1516	j = surf_usm_v(l)%j(m)
[4246]	1517	k = surf_usm_v(l)%k(m)
	1518	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
[4646]	1519	indoor_wall_window_temperature = &
[4671]	1520	surf_usm_v(l)%frac(m,ind_veg_wall) * t_wall_v(l)%val(nzt_wall,m) &
	1521	+ surf_usm_v(l)%frac(m,ind_wat_win) * t_window_v(l)%val(nzt_wall,m)
[4246]	1522	!
[4646]	1523	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1524	!-- threshold parameter (params_solar_protection), sun protection will
[4246]	1525	!-- be activated
[4646]	1526	IF ( net_sw_in <= params_solar_protection ) THEN
[4246]	1527	solar_protection_off = 1
[4646]	1528	solar_protection_on = 0
	1529	ELSE
[4246]	1530	solar_protection_off = 0
[4646]	1531	solar_protection_on = 1
[4246]	1532	ENDIF
	1533	!
[4646]	1534	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on
	1535	!-- automatic sun protection.
[4246]	1536	!-- DIN 4108 - 2 chap.8
[4646]	1537	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1538	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * &
	1539	solar_protection_on ) &
[4246]	1540	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1541	q_sol = phi_sol
	1542	!
[4646]	1543	!-- Calculation of the mass specific thermal load for internal and external heatsources.
[4246]	1544	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1545	q_c_m = phi_m
	1546	!
[4646]	1547	!-- Calculation mass specific thermal load implied non thermal mass.
	1548	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1549	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with
	1550	!< phi_ia=0,5*phi_int
	1551	q_c_st = phi_st
[4246]	1552	!
[4646]	1553	!-- Calculations for deriving indoor temperature and heat flux into the wall.
	1554	!-- Step 1: indoor temperature without heating and cooling.
[4246]	1555	!-- section C.4.1 Picture C.2 zone 3)
	1556	phi_hc_nd = 0.0_wp
[4646]	1557	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
[4246]	1558	near_facade_temperature, phi_hc_nd )
	1559	!
[4646]	1560	!-- If air temperature between border temperatures of heating and cooling, assign output
	1561	!-- variable, then ready.
	1562	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. &
	1563	theta_air <= buildings(nb)%theta_int_c_set ) THEN
[4246]	1564	phi_hc_nd_ac = 0.0_wp
	1565	phi_hc_nd = phi_hc_nd_ac
	1566	theta_air_ac = theta_air
	1567	!
	1568	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1569	!-- again.
	1570	ELSE
	1571	!
	1572	!-- Temperature not correct, calculation method according to section C4.2
	1573	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1574	!
	1575	!-- Heating or cooling?
	1576	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1577	theta_air_set = buildings(nb)%theta_int_c_set
[4646]	1578	ELSE
	1579	theta_air_set = buildings(nb)%theta_int_h_set
[4246]	1580	ENDIF
	1581
	1582	!-- Calculate the temperature with phi_hc_nd_10
	1583	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1584	phi_hc_nd = phi_hc_nd_10
	1585
[4646]	1586	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1587	near_facade_temperature, phi_hc_nd )
	1588
[4246]	1589	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1590
[4646]	1591	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
[4246]	1592	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1593	!
[4646]	1594	!-- Step 3: with temperature ratio to determine the heating or cooling capacity
	1595	!-- If necessary, limit the power to maximum power.
[4246]	1596	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1597	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
	1598	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
[4646]	1599	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. &
	1600	phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
[4246]	1601	phi_hc_nd_ac = phi_hc_nd_un
	1602	phi_hc_nd = phi_hc_nd_un
	1603	ELSE
	1604	!
[4646]	1605	!-- Step 4: inner temperature with maximum heating (phi_hc_nd_un positive) or cooling
	1606	!-- (phi_hc_nd_un negative)
[4246]	1607	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1608	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1609	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
[4646]	1610	ELSE
[4246]	1611	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1612	ENDIF
	1613	ENDIF
[4646]	1614	phi_hc_nd = phi_hc_nd_ac
[4246]	1615	!
	1616	!-- Calculate the temperature with phi_hc_nd_ac (new)
[4646]	1617	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1618	near_facade_temperature, phi_hc_nd )
[4246]	1619	theta_air_ac = theta_air
	1620	ENDIF
	1621	!
	1622	!-- Update theta_m_t_prev
	1623	theta_m_t_prev = theta_m_t
[4646]	1624
[4246]	1625	q_vent = h_v * ( theta_air - near_facade_temperature )
	1626	!
[4646]	1627	!-- Calculate the operating temperature with weighted mean of temperature of air and mean.
	1628	!-- Will be used for thermal comfort calculations.
[4246]	1629	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
	1630	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
	1631	!
[4646]	1632	!-- Heat flux into the wall. Value needed in urban_surface_mod to
[4246]	1633	!-- calculate heat transfer through wall layers towards the facade
[4646]	1634	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
	1635	/ ( facade_element_area - window_area_per_facade )
[4246]	1636	q_trans = q_wall_win * facade_element_area
	1637	!
	1638	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
	1639	surf_usm_v(l)%iwghf_eb(m) = q_wall_win
	1640	surf_usm_v(l)%iwghf_eb_window(m) = q_wall_win
	1641	!
[4646]	1642	!-- Sum up operational indoor temperature per kk-level. Further below, this temperature is
	1643	!-- reduced by MPI to one temperature per kk-level and building (processor overlapping).
[4246]	1644	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1645	!
[4646]	1646	!-- Calculation of waste heat.
	1647	!-- Anthropogenic heat output.
	1648	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
[4246]	1649	heating_on = 1
	1650	cooling_on = 0
[4646]	1651	ELSE
[4246]	1652	heating_on = 0
	1653	cooling_on = -1
	1654	ENDIF
	1655
[4646]	1656	q_waste_heat = ( phi_hc_nd * ( buildings(nb)%params_waste_heat_h * heating_on + &
	1657	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1658	) / facade_element_area !< [W/m2] , observe the directional convention in
	1659	!< PALM!
[4246]	1660	surf_usm_v(l)%waste_heat(m) = q_waste_heat
	1661	ENDDO !< Vertical surfaces loop
	1662	ENDIF !< buildings(nb)%on_pe
	1663	ENDDO !< buildings loop
	1664
	1665	!
[4646]	1666	!-- Determine the mean building temperature.
[4246]	1667	DO nb = 1, num_build
	1668	!
[4646]	1669	!-- Allocate dummy array used for summing-up facade elements.
	1670	!-- Please note, dummy arguments are necessary as building-date type arrays are not necessarily
	1671	!-- allocated on all PEs.
[4246]	1672	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1673	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1674	t_in_l_send = 0.0_wp
	1675	t_in_recv = 0.0_wp
	1676
	1677	IF ( buildings(nb)%on_pe ) THEN
	1678	t_in_l_send = buildings(nb)%t_in_l
	1679	ENDIF
	1680
	1681
[4646]	1682	#if defined( __parallel )
	1683	CALL MPI_ALLREDUCE( t_in_l_send, &
	1684	t_in_recv, &
	1685	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	1686	MPI_REAL, &
	1687	MPI_SUM, &
	1688	comm2d, &
[4246]	1689	ierr )
	1690
[4646]	1691	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = t_in_recv
[4246]	1692	#else
[4646]	1693	IF ( ALLOCATED( buildings(nb)%t_in ) ) buildings(nb)%t_in = buildings(nb)%t_in_l
[4246]	1694	#endif
	1695
	1696	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
	1697	!
[4646]	1698	!-- Average indoor temperature. Note, in case a building is completely surrounded by higher
	1699	!-- buildings, it may have no facade elements at some height levels, which will lead to a
	1700	!-- division by zero.
[4246]	1701	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
[4646]	1702	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) > 0 ) THEN
	1703	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
	1704	REAL( buildings(nb)%num_facade_h(k) + &
	1705	buildings(nb)%num_facade_v(k), KIND = wp )
[4246]	1706	ENDIF
	1707	ENDDO
[4299]	1708	!
[4646]	1709	!-- If indoor temperature is not defined because of missing facade elements, the values from
	1710	!-- the above-lying level will be taken.
	1711	!-- At least at the top of the buildings facades are defined, so that at least there an indoor
	1712	!-- temperature is defined. This information will propagate downwards the building.
[4299]	1713	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
[4646]	1714	IF ( buildings(nb)%num_facade_h(k) + buildings(nb)%num_facade_v(k) <= 0 ) THEN
[4299]	1715	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
	1716	ENDIF
	1717	ENDDO
[4246]	1718	ENDIF
	1719
[4646]	1720
[4246]	1721	!
	1722	!-- Deallocate dummy arrays
	1723	DEALLOCATE( t_in_l_send )
	1724	DEALLOCATE( t_in_recv )
	1725
	1726	ENDDO
[4646]	1727
[4246]	1728	END SUBROUTINE im_main_heatcool
	1729
[4646]	1730
	1731	!--------------------------------------------------------------------------------------------------!
[4246]	1732	! Description:
	1733	!-------------
	1734	!> Check data output for plant canopy model
[4646]	1735	!--------------------------------------------------------------------------------------------------!
[4246]	1736	SUBROUTINE im_check_data_output( var, unit )
[4402]	1737
[4246]	1738	CHARACTER (LEN=*) :: unit !<
	1739	CHARACTER (LEN=*) :: var !<
[4646]	1740
[4246]	1741	SELECT CASE ( TRIM( var ) )
[4646]	1742
	1743
[4246]	1744	CASE ( 'im_hf_roof')
	1745	unit = 'W m-2'
[4646]	1746
[4246]	1747	CASE ( 'im_hf_wall_win' )
	1748	unit = 'W m-2'
[4646]	1749
[4246]	1750	CASE ( 'im_hf_wall_win_waste' )
	1751	unit = 'W m-2'
[4646]	1752
[4246]	1753	CASE ( 'im_hf_roof_waste' )
	1754	unit = 'W m-2'
[4646]	1755
[4246]	1756	CASE ( 'im_t_indoor_mean' )
	1757	unit = 'K'
[4646]	1758
[4246]	1759	CASE ( 'im_t_indoor_roof' )
	1760	unit = 'K'
[4646]	1761
[4246]	1762	CASE ( 'im_t_indoor_wall_win' )
	1763	unit = 'K'
[4646]	1764
[4246]	1765	CASE DEFAULT
	1766	unit = 'illegal'
[4646]	1767
[4246]	1768	END SELECT
[4646]	1769
[4246]	1770	END SUBROUTINE
	1771
	1772
[4646]	1773	!--------------------------------------------------------------------------------------------------!
[4246]	1774	! Description:
	1775	!-------------
	1776	!> Check parameters routine for plant canopy model
[4646]	1777	!--------------------------------------------------------------------------------------------------!
[4246]	1778	SUBROUTINE im_check_parameters
	1779
	1780	! USE control_parameters,
	1781	! ONLY: message_string
[4646]	1782
[4246]	1783	END SUBROUTINE im_check_parameters
	1784
[4646]	1785
	1786	!--------------------------------------------------------------------------------------------------!
[4246]	1787	! Description:
	1788	!-------------
	1789	!> Subroutine defining appropriate grid for netcdf variables.
	1790	!> It is called from subroutine netcdf.
[4646]	1791	!--------------------------------------------------------------------------------------------------!
[4246]	1792	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
	1793
[4646]	1794	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
	1795	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
	1796	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
	1797	CHARACTER (LEN=*), INTENT(IN) :: var
	1798
	1799	LOGICAL, INTENT(OUT) :: found
	1800
	1801
	1802	found = .TRUE.
[4246]	1803	!
	1804	!-- Check for the grid
	1805	SELECT CASE ( TRIM( var ) )
	1806
	1807	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
	1808	grid_x = 'x'
	1809	grid_y = 'y'
	1810	grid_z = 'zw'
	1811	!
	1812	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
	1813	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
	1814	grid_x = 'x'
	1815	grid_y = 'y'
	1816	grid_z = 'zu'
	1817
	1818	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win')
	1819	grid_x = 'x'
	1820	grid_y = 'y'
	1821	grid_z = 'zw'
[4646]	1822
[4246]	1823	CASE DEFAULT
	1824	found = .FALSE.
	1825	grid_x = 'none'
	1826	grid_y = 'none'
	1827	grid_z = 'none'
	1828	END SELECT
[4646]	1829
[4246]	1830	END SUBROUTINE im_define_netcdf_grid
	1831
[4646]	1832
	1833	!--------------------------------------------------------------------------------------------------!
[4246]	1834	! Description:
	1835	! ------------
	1836	!> Subroutine defining 3D output variables
[4646]	1837	!--------------------------------------------------------------------------------------------------!
	1838	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, nzb_do, nzt_do )
[4246]	1839
[4402]	1840	USE indices
	1841
	1842	USE kinds
	1843
[4646]	1844	CHARACTER (LEN=*) :: variable !<
[4246]	1845
[4646]	1846	INTEGER(iwp) :: av !<
	1847	INTEGER(iwp) :: i !<
	1848	INTEGER(iwp) :: j !<
	1849	INTEGER(iwp) :: k !<
[4246]	1850	INTEGER(iwp) :: l !<
[4646]	1851	INTEGER(iwp) :: m !<
	1852	INTEGER(iwp) :: nb !< index of the building in the building data structure
[4246]	1853	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
	1854	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
	1855
[4646]	1856	LOGICAL :: found !<
	1857
[4246]	1858	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
	1859
[4646]	1860	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
	1861
[4246]	1862	local_pf = fill_value
[4646]	1863
[4246]	1864	found = .TRUE.
[4646]	1865
[4246]	1866	SELECT CASE ( TRIM( variable ) )
	1867	!
[4646]	1868	!-- Output of indoor temperature. All grid points within the building are filled with values,
	1869	!-- while atmospheric grid points are set to _FillValues.
[4246]	1870	CASE ( 'im_t_indoor_mean' )
	1871	IF ( av == 0 ) THEN
	1872	DO i = nxl, nxr
	1873	DO j = nys, nyn
	1874	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1875	!
[4646]	1876	!-- Determine index of the building within the building data structure.
	1877	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM=1 )
[4246]	1878	IF ( buildings(nb)%on_pe ) THEN
	1879	!
[4646]	1880	!-- Write mean building temperature onto output array. Please note, in
	1881	!-- contrast to many other loops in the output, the vertical bounds are
	1882	!-- determined by the lowest and hightest vertical index occupied by the
	1883	!-- building.
[4246]	1884	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	1885	local_pf(i,j,k) = buildings(nb)%t_in(k)
	1886	ENDDO
	1887	ENDIF
	1888	ENDIF
	1889	ENDDO
	1890	ENDDO
[4646]	1891	ENDIF
[4246]	1892
	1893	CASE ( 'im_hf_roof' )
[4646]	1894	IF ( av == 0 ) THEN
[4671]	1895	DO m = 1, surf_usm_h(0)%ns
	1896	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	1897	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	1898	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	1899	local_pf(i,j,k) = surf_usm_h(0)%iwghf_eb(m)
[4246]	1900	ENDDO
[4646]	1901	ENDIF
[4246]	1902
	1903	CASE ( 'im_hf_roof_waste' )
[4646]	1904	IF ( av == 0 ) THEN
[4671]	1905	DO m = 1, surf_usm_h(0)%ns
	1906	i = surf_usm_h(0)%i(m) !+ surf_usm_h%ioff
	1907	j = surf_usm_h(0)%j(m) !+ surf_usm_h%joff
	1908	k = surf_usm_h(0)%k(m) !+ surf_usm_h%koff
	1909	local_pf(i,j,k) = surf_usm_h(0)%waste_heat(m)
[4246]	1910	ENDDO
	1911	ENDIF
	1912
	1913	CASE ( 'im_hf_wall_win' )
[4646]	1914	IF ( av == 0 ) THEN
[4246]	1915	DO l = 0, 3
	1916	DO m = 1, surf_usm_v(l)%ns
	1917	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1918	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1919	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1920	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
	1921	ENDDO
	1922	ENDDO
	1923	ENDIF
	1924
	1925	CASE ( 'im_hf_wall_win_waste' )
[4646]	1926	IF ( av == 0 ) THEN
[4246]	1927	DO l = 0, 3
[4646]	1928	DO m = 1, surf_usm_v(l)%ns
[4246]	1929	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1930	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1931	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
[4646]	1932	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
[4246]	1933	ENDDO
	1934	ENDDO
	1935	ENDIF
	1936
	1937	!
	1938	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
	1939
	1940	! CASE ( 'im_t_indoor_roof' )
[4646]	1941	! IF ( av == 0 ) THEN
[4246]	1942	! DO m = 1, surf_usm_h%ns
	1943	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1944	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1945	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1946	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
	1947	! ENDDO
	1948	! ENDIF
[4646]	1949	!
[4246]	1950	! CASE ( 'im_t_indoor_wall_win' )
[4646]	1951	! IF ( av == 0 ) THEN
[4246]	1952	! DO l = 0, 3
	1953	! DO m = 1, surf_usm_v(l)%ns
	1954	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1955	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1956	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1957	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
	1958	! ENDDO
	1959	! ENDDO
	1960	! ENDIF
	1961
	1962	CASE DEFAULT
	1963	found = .FALSE.
	1964
[4646]	1965	END SELECT
	1966
	1967	END SUBROUTINE im_data_output_3d
	1968
	1969
	1970	!--------------------------------------------------------------------------------------------------!
[4246]	1971	! Description:
	1972	! ------------
	1973	!> Parin for &indoor_parameters for indoor model
[4646]	1974	!--------------------------------------------------------------------------------------------------!
[4246]	1975	SUBROUTINE im_parin
[4646]	1976
	1977	USE control_parameters, &
[4246]	1978	ONLY: indoor_model
	1979
[4402]	1980
[4246]	1981	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
	1982
[4310]	1983	NAMELIST /indoor_parameters/ initial_indoor_temperature
[4246]	1984
[4646]	1985
[4246]	1986	!
	1987	!-- Try to find indoor model package
	1988	REWIND ( 11 )
	1989	line = ' '
[4646]	1990	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
[4246]	1991	READ ( 11, '(A)', END=10 ) line
	1992	ENDDO
	1993	BACKSPACE ( 11 )
	1994
	1995	!
	1996	!-- Read user-defined namelist
	1997	READ ( 11, indoor_parameters )
	1998	!
	1999	!-- Set flag that indicates that the indoor model is switched on
	2000	indoor_model = .TRUE.
	2001
	2002	!
	2003	!-- Activate spinup (maybe later
	2004	! IF ( spinup_time > 0.0_wp ) THEN
	2005	! coupling_start_time = spinup_time
	2006	! end_time = end_time + spinup_time
	2007	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
	2008	! spinup_pt_mean = pt_surface
	2009	! ENDIF
	2010	! spinup = .TRUE.
	2011	! ENDIF
	2012
	2013	10 CONTINUE
[4646]	2014
[4246]	2015	END SUBROUTINE im_parin
	2016
	2017
	2018	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |