Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 4554

Last change on this file since 4554 was 4481, checked in by maronga, 5 years ago
Bugfix for copyright updates in document_changes; copyright update applied to all files
Property svn:keywords set to `Id`
File size: 99.2 KB

Rev	Line
[4246]	1	!> @file indoor_model_mod.f90
	2	!--------------------------------------------------------------------------------!
	3	! This file is part of the PALM model system.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4481]	17	! Copyright 2018-2020 Leibniz Universitaet Hannover
	18	! Copyright 2018-2020 Hochschule Offenburg
[4246]	19	!--------------------------------------------------------------------------------!
	20	!
	21	! Current revisions:
	22	! -----------------
[4227]	23	!
[4442]	24	!
[4246]	25	! Former revisions:
	26	! -----------------
	27	! $Id: indoor_model_mod.f90 4481 2020-03-31 18:55:54Z eckhard $
[4442]	28	! Change order of dimension in surface array %frac to allow for better
	29	! vectorization.
	30	!
	31	! 4441 2020-03-04 19:20:35Z suehring
[4402]	32	! Major bugfix in calculation of energy demand - floor-area-per-facade was wrongly
	33	! calculated leading to unrealistically high energy demands and thus to
	34	! unreallistically high waste-heat fluxes.
	35	!
	36	! 4346 2019-12-18 11:55:56Z motisi
[4346]	37	! Introduction of wall_flags_total_0, which currently sets bits based on static
	38	! topography information used in wall_flags_static_0
	39	!
	40	! 4329 2019-12-10 15:46:36Z motisi
[4329]	41	! Renamed wall_flags_0 to wall_flags_static_0
	42	!
	43	! 4310 2019-11-26 19:01:28Z suehring
[4310]	44	! Remove dt_indoor from namelist input. The indoor model is an hourly-based
	45	! model, calling it more/less often lead to inaccurate results.
	46	!
	47	! 4299 2019-11-22 10:13:38Z suehring
[4299]	48	! Output of indoor temperature revised (to avoid non-defined values within
	49	! buildings)
	50	!
	51	! 4267 2019-10-16 18:58:49Z suehring
[4267]	52	! Bugfix in initialization, some indices to access building_pars where wrong.
	53	! Introduction of seasonal parameters.
[4246]	54	!
[4267]	55	! 4246 2019-09-30 09:27:52Z pavelkrc
[4246]	56	!
[4267]	57	!
[4245]	58	! 4242 2019-09-27 12:59:10Z suehring
[4246]	59	! Bugfix in array index
	60	!
	61	! 4238 2019-09-25 16:06:01Z suehring
	62	! - Bugfix in determination of minimum facade height and in location message
	63	! - Bugfix, avoid division by zero
	64	! - Some optimization
	65	!
	66	! 4227 2019-09-10 18:04:34Z gronemeier
	67	! implement new palm_date_time_mod
	68	!
	69	! 4217 2019-09-04 09:47:05Z scharf
	70	! Corrected "Former revisions" section
	71	!
	72	! 4209 2019-09-02 12:00:03Z suehring
	73	! - Bugfix in initialization of indoor temperature
	74	! - Prescibe default indoor temperature in case it is not given in the
	75	! namelist input
	76	!
	77	! 4182 2019-08-21 14:37:54Z scharf
	78	! Corrected "Former revisions" section
	79	!
	80	! 4148 2019-08-08 11:26:00Z suehring
	81	! Bugfix in case of non grid-resolved buildings. Further, vertical grid spacing
	82	! is now considered at the correct level.
	83	! - change calculation of a_m and c_m
	84	! - change calculation of u-values (use h_es in building array)
	85	! - rename h_tr_... to h_t_...
	86	! h_tr_em to h_t_wm
	87	! h_tr_op to h_t_wall
	88	! h_tr_w to h_t_es
	89	! - rename h_ve to h_v
	90	! - rename h_is to h_ms
	91	! - inserted net_floor_area
	92	! - inserted params_waste_heat_h, params_waste_heat_c from building database
	93	! in building array
	94	! - change calculation of q_waste_heat
	95	! - bugfix in averaging mean indoor temperature
	96	!
	97	! 3759 2019-02-21 15:53:45Z suehring
	98	! - Calculation of total building volume
	99	! - Several bugfixes
	100	! - Calculation of building height revised
	101	!
	102	! 3745 2019-02-15 18:57:56Z suehring
	103	! - remove building_type from module
	104	! - initialize parameters for each building individually instead of a bulk
	105	! initializaion with identical building type for all
	106	! - output revised
	107	! - add missing _wp
	108	! - some restructuring of variables in building data structure
	109	!
	110	! 3744 2019-02-15 18:38:58Z suehring
	111	! Some interface calls moved to module_interface + cleanup
	112	!
	113	! 3469 2018-10-30 20:05:07Z kanani
	114	! Initial revision (tlang, suehring, kanani, srissman)!
	115	!
	116	! Authors:
	117	! --------
	118	! @author Tobias Lang
	119	! @author Jens Pfafferott
	120	! @author Farah Kanani-Suehring
	121	! @author Matthias Suehring
	122	! @author Sascha RiÃmann
	123	!
	124	!
	125	! Description:
	126	! ------------
	127	!> <Description of the new module>
	128	!> Module for Indoor Climate Model (ICM)
	129	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
	130	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
	131	!> This module differ between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine thermal comfort
	132	!> the heat transfer between indoor and outdoor is simplified
	133
	134	!> @todo Replace window_area_per_facade by %frac(1,m) for window
	135	!> @todo emissivity change for window blinds if solar_protection_on=1
	136
	137	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
	138	!> @note How to write indoor temperature output to pt array?
	139	!>
	140	!> @bug <Enter known bugs here>
	141	!------------------------------------------------------------------------------!
	142	MODULE indoor_model_mod
	143
[4402]	144	USE arrays_3d, &
	145	ONLY: ddzw, &
	146	dzw, &
	147	pt
	148
[4246]	149	USE control_parameters, &
	150	ONLY: initializing_actions
	151
	152	USE kinds
	153
	154	USE netcdf_data_input_mod, &
	155	ONLY: building_id_f, building_type_f
	156
[4267]	157	USE palm_date_time_mod, &
	158	ONLY: get_date_time, northward_equinox, seconds_per_hour, &
	159	southward_equinox
	160
[4246]	161	USE surface_mod, &
	162	ONLY: surf_usm_h, surf_usm_v
	163
	164
	165	IMPLICIT NONE
	166
	167	!
	168	!-- Define data structure for buidlings.
	169	TYPE build
	170
	171	INTEGER(iwp) :: id !< building ID
	172	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
	173	INTEGER(iwp) :: kb_max !< highest vertical index of a building
	174	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
	175	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
	176	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
	177	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
	178	INTEGER(iwp) :: ventilation_int_loads !< [-] allocation of activity in the building
	179
	180	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
	181	!< for vertical surfaces with building
	182	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
	183	!< horizontal surfaces with building
	184	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
	185	!< vertical surfaces with building
	186	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
	187	!< and height level
	188	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
	189	!< and height level
	190
	191
	192	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
	193
	194	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
	195	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
	196	REAL(wp) :: area_facade !< [m2] area of total facade
	197	REAL(wp) :: building_height !< building height
	198	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
	199	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
	200	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
	201	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
	202	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
	203	REAL(wp) :: f_c_win !< [-] shading factor
[4402]	204	REAL(wp) :: fapf !< [m2/m2] floor area per facade
[4246]	205	REAL(wp) :: g_value_win !< [-] SHGC factor
	206	REAL(wp) :: h_es !< [W/(m2 K)] surface-related heat transfer coefficient between extern and surface
	207	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
	208	REAL(wp) :: height_storey !< [m] storey heigth
	209	REAL(wp) :: params_waste_heat_c !< [-] anthropogenic heat outputs for cooling e.g. 1.33 for KKM with COP = 3
	210	REAL(wp) :: params_waste_heat_h !< [-] anthropogenic heat outputs for heating e.g. 1 - 0.9 = 0.1 for combustion with eta = 0.9 or -2 for WP with COP = 3
	211	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
	212	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (positive)
	213	REAL(wp) :: q_c_max !< [W/m2] Max. Cooling heat flux per netto floor area (negative)
	214	REAL(wp) :: q_h_max !< [W/m2] Max. Heating heat flux per netto floor area (positive)
	215	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
	216	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
	217	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
	218	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
	219	REAL(wp) :: net_floor_area !< [m2] netto ground area
	220	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
	221	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
	222	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
	223	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
	224	REAL(wp) :: vol_tot !< [m3] total building volume
	225
	226	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
	227	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
	228	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
	229	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
	230	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
	231
	232	END TYPE build
	233
	234	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
	235
	236	INTEGER(iwp) :: num_build !< total number of buildings in domain
	237	!
	238	!-- Declare all global variables within the module
	239	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
	240	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
	241	INTEGER(iwp) :: solar_protection_off !< Solar protection off
	242	INTEGER(iwp) :: solar_protection_on !< Solar protection on
	243
[4310]	244	REAL(wp), PARAMETER :: dt_indoor = 3600.0_wp !< [s] time interval for indoor-model application, fixed to 3600.0 due to model requirements
	245
[4246]	246	REAL(wp) :: a_m !< [m2] the effective mass-related area
	247	REAL(wp) :: air_change !< [1/h] Airflow
	248	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
	249	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
	250	REAL(wp) :: floor_area_per_facade !< [m2/m2] floor area per facade area
	251	REAL(wp) :: h_t_1 !< [W/K] Heat transfer coefficient auxiliary variable 1
	252	REAL(wp) :: h_t_2 !< [W/K] Heat transfer coefficient auxiliary variable 2
	253	REAL(wp) :: h_t_3 !< [W/K] Heat transfer coefficient auxiliary variable 3
	254	REAL(wp) :: h_t_wm !< [W/K] Heat transfer coefficient of the emmision (got with h_t_ms the thermal mass)
	255	REAL(wp) :: h_t_is !< [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
	256	REAL(wp) :: h_t_ms !< [W/K] Heat transfer conductance term (got with h_t_wm the thermal mass)
	257	REAL(wp) :: h_t_wall !< [W/K] heat transfer coefficient of opaque components (assumption: got all
	258	!< thermal mass) contains of h_t_wm and h_t_ms
	259	REAL(wp) :: h_t_es !< [W/K] heat transfer coefficient of doors, windows, curtain walls and
	260	!< glazed walls (assumption: thermal mass=0)
	261	REAL(wp) :: h_v !< [W/K] heat transfer of ventilation
	262	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
	263	REAL(wp) :: initial_indoor_temperature = 293.15 !< [K] initial indoor temperature (namelist parameter)
	264	REAL(wp) :: net_sw_in !< [W/m2] net short-wave radiation
	265	REAL(wp) :: phi_hc_nd !< [W] heating demand and/or cooling demand
	266	REAL(wp) :: phi_hc_nd_10 !< [W] heating demand and/or cooling demand for heating or cooling
	267	REAL(wp) :: phi_hc_nd_ac !< [W] actual heating demand and/or cooling demand
	268	REAL(wp) :: phi_hc_nd_un !< [W] unlimited heating demand and/or cooling demand which is necessary to
	269	!< reach the demanded required temperature (heating is positive,
	270	!< cooling is negative)
	271	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
	272	REAL(wp) :: phi_m !< [W] mass specific thermal load (internal and external)
	273	REAL(wp) :: phi_mtot !< [W] total mass specific thermal load (internal and external)
	274	REAL(wp) :: phi_sol !< [W] solar loads
	275	REAL(wp) :: phi_st !< [W] mass specific thermal load implied non thermal mass
	276	REAL(wp) :: q_wall_win !< [W/m2]heat flux from indoor into wall/window
	277	REAL(wp) :: q_waste_heat !< [W/m2]waste heat, sum of waste heat over the roof to Palm
	278
	279	REAL(wp) :: q_c_m !< [W] Energy of thermal storage mass specific thermal load for internal
	280	!< and external heatsources (for energy bilanz)
	281	REAL(wp) :: q_c_st !< [W] Energy of thermal storage mass specific thermal load implied non thermal mass (for energy bilanz)
	282	REAL(wp) :: q_int !< [W] Energy of internal air load (for energy bilanz)
	283	REAL(wp) :: q_sol !< [W] Energy of solar (for energy bilanz)
	284	REAL(wp) :: q_trans !< [W] Energy of transmission (for energy bilanz)
	285	REAL(wp) :: q_vent !< [W] Energy of ventilation (for energy bilanz)
	286
	287	REAL(wp) :: schedule_d !< [-] activation for internal loads (low or high + low)
	288	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
	289	REAL(wp) :: theta_air !< [degree_C] air temperature of the RC-node
	290	REAL(wp) :: theta_air_0 !< [degree_C] air temperature of the RC-node in equilibrium
	291	REAL(wp) :: theta_air_10 !< [degree_C] air temperature of the RC-node from a heating capacity
	292	!< of 10 W/m2
	293	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
	294	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
	295	REAL(wp) :: theta_m !< [degree_C} inner temperature of the RC-node
	296	REAL(wp) :: theta_m_t !< [degree_C] (Fictive) component temperature timestep
	297	REAL(wp) :: theta_m_t_prev !< [degree_C] (Fictive) component temperature previous timestep (do not change)
	298	REAL(wp) :: theta_op !< [degree_C] operative temperature
	299	REAL(wp) :: theta_s !< [degree_C] surface temperature of the RC-node
	300	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
	301	REAL(wp) :: total_area !< [m2] area of all surfaces pointing to zone
	302	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
	303
	304	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m2 K)] surface-related heat transfer coefficient between
	305	!< surface and air (chap. 7.2.2.2)
	306	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/(m2 K)] surface-related heat transfer coefficient between component and surface (chap. 12.2.2)
	307	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly cooling 2.0_wp
	308	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall
	309	!< DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
	310	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus
	311	!< Datenbank 27 window_area_per_facade_percent
	312	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation
	313	!< on facade exceeds this value
[4267]	314	!
	315	!-- Definition of seasonal parameters, summer and winter, for different building types
	316	REAL(wp), DIMENSION(0:1,1:7) :: summer_pars = RESHAPE( (/ & ! building_type 1
	317	0.5_wp, & ! basical airflow without occupancy of the room
	318	2.0_wp, & ! additional airflow depend of occupancy of the room
	319	0.5_wp, & ! building_type 2: basical airflow without occupancy of the room
	320	2.0_wp, & ! additional airflow depend of occupancy of the room
	321	0.8_wp, & ! building_type 3: basical airflow without occupancy of the room
	322	2.0_wp, & ! additional airflow depend of occupancy of the room
	323	0.1_wp, & ! building_type 4: basical airflow without occupancy of the room
	324	1.5_wp, & ! additional airflow depend of occupancy of the room
	325	0.1_wp, & ! building_type 5: basical airflow without occupancy of the room
	326	1.5_wp, & ! additional airflow depend of occupancy of the room
	327	0.1_wp, & ! building_type 6: basical airflow without occupancy of the room
	328	1.5_wp, & ! additional airflow depend of occupancy of the room
	329	0.1_wp, & ! building_type 7: basical airflow without occupancy of the room
	330	1.5_wp & ! additional airflow depend of occupancy of the room
	331	/), (/ 2, 7 /) )
[4246]	332
[4267]	333	REAL(wp), DIMENSION(0:1,1:7) :: winter_pars = RESHAPE( (/ & ! building_type 1
	334	0.1_wp, & ! basical airflow without occupancy of the room
	335	0.5_wp, & ! additional airflow depend of occupancy of the room
	336	0.1_wp, & ! building_type 2: basical airflow without occupancy of the room
	337	0.5_wp, & ! additional airflow depend of occupancy of the room
	338	0.1_wp, & ! building_type 3: basical airflow without occupancy of the room
	339	0.5_wp, & ! additional airflow depend of occupancy of the room
	340	0.1_wp, & ! building_type 4: basical airflow without occupancy of the room
	341	1.5_wp, & ! additional airflow depend of occupancy of the room
	342	0.1_wp, & ! building_type 5: basical airflow without occupancy of the room
	343	1.5_wp, & ! additional airflow depend of occupancy of the room
	344	0.1_wp, & ! building_type 6: basical airflow without occupancy of the room
	345	1.5_wp, & ! additional airflow depend of occupancy of the room
	346	0.1_wp, & ! building_type 7: basical airflow without occupancy of the room
	347	1.5_wp & ! additional airflow depend of occupancy of the room
	348	/), (/ 2, 7 /) )
	349
[4246]	350	SAVE
	351
	352
	353	PRIVATE
	354
	355	!
	356	!-- Add INTERFACES that must be available to other modules
	357	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, &
	358	im_check_data_output, im_data_output_3d, im_check_parameters
	359
	360
	361	!
	362	!-- Add VARIABLES that must be available to other modules
	363	PUBLIC dt_indoor, skip_time_do_indoor, time_indoor
	364
	365	!
	366	!-- PALM interfaces:
	367	!-- Data output checks for 2D/3D data to be done in check_parameters
	368	INTERFACE im_check_data_output
	369	MODULE PROCEDURE im_check_data_output
	370	END INTERFACE im_check_data_output
	371	!
	372	!-- Input parameter checks to be done in check_parameters
	373	INTERFACE im_check_parameters
	374	MODULE PROCEDURE im_check_parameters
	375	END INTERFACE im_check_parameters
	376	!
	377	!-- Data output of 3D data
	378	INTERFACE im_data_output_3d
	379	MODULE PROCEDURE im_data_output_3d
	380	END INTERFACE im_data_output_3d
	381
	382	!
	383	!-- Definition of data output quantities
	384	INTERFACE im_define_netcdf_grid
	385	MODULE PROCEDURE im_define_netcdf_grid
	386	END INTERFACE im_define_netcdf_grid
	387	!
	388	! !
	389	! !-- Output of information to the header file
	390	! INTERFACE im_header
	391	! MODULE PROCEDURE im_header
	392	! END INTERFACE im_header
	393	!
	394	!-- Calculations for indoor temperatures
	395	INTERFACE im_calc_temperatures
	396	MODULE PROCEDURE im_calc_temperatures
	397	END INTERFACE im_calc_temperatures
	398	!
	399	!-- Initialization actions
	400	INTERFACE im_init
	401	MODULE PROCEDURE im_init
	402	END INTERFACE im_init
	403	!
	404	!-- Main part of indoor model
	405	INTERFACE im_main_heatcool
	406	MODULE PROCEDURE im_main_heatcool
	407	END INTERFACE im_main_heatcool
	408	!
	409	!-- Reading of NAMELIST parameters
	410	INTERFACE im_parin
	411	MODULE PROCEDURE im_parin
	412	END INTERFACE im_parin
	413
	414	CONTAINS
	415
	416	!------------------------------------------------------------------------------!
	417	! Description:
	418	! ------------
	419	!< Calculation of the air temperatures and mean radiation temperature
	420	!< This is basis for the operative temperature
	421	!< Based on a Crank-Nicholson scheme with a timestep of a hour
	422	!------------------------------------------------------------------------------!
	423	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	424	near_facade_temperature, phi_hc_nd_dummy )
[4402]	425
[4246]	426	INTEGER(iwp) :: i
	427	INTEGER(iwp) :: j
	428	INTEGER(iwp) :: k
	429
	430	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	431	REAL(wp) :: near_facade_temperature
	432	REAL(wp) :: phi_hc_nd_dummy
	433	!
	434	!-- Calculation of total mass specific thermal load (internal and external)
	435	phi_mtot = ( phi_m + h_t_wm * indoor_wall_window_temperature &
	436	+ h_t_3 * ( phi_st + h_t_es * pt(k,j,i) &
	437	+ h_t_1 * &
	438	( ( ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	439	+ near_facade_temperature ) &
	440	) / h_t_2 &
	441	) !< [degree_C] Eq. (C.5)
	442	!
	443	!-- Calculation of component temperature at factual timestep
	444	theta_m_t = ( ( theta_m_t_prev &
	445	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_t_3 + h_t_wm ) ) &
	446	+ phi_mtot &
	447	) &
	448	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_t_3 + h_t_wm ) ) &
	449	) !< [degree_C] Eq. (C.4)
	450	!
	451	!-- Calculation of mean inner temperature for the RC-node in actual timestep
	452	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
	453
	454	!
	455	!-- Calculation of mean surface temperature of the RC-node in actual timestep
	456	theta_s = ( ( h_t_ms * theta_m + phi_st + h_t_es * pt(k,j,i) &
	457	+ h_t_1 * ( near_facade_temperature &
	458	+ ( phi_ia + phi_hc_nd_dummy ) / h_v ) &
	459	) &
	460	/ ( h_t_ms + h_t_es + h_t_1 ) &
	461	) !< [degree_C] Eq. (C.10)
	462
	463	!
	464	!-- Calculation of the air temperature of the RC-node
	465	theta_air = ( h_t_is * theta_s + h_v * near_facade_temperature &
	466	+ phi_ia + phi_hc_nd_dummy ) / ( h_t_is + h_v ) !< [degree_C] Eq. (C.11)
	467
	468	END SUBROUTINE im_calc_temperatures
	469
	470	!------------------------------------------------------------------------------!
	471	! Description:
	472	! ------------
	473	!> Initialization of the indoor model.
	474	!> Static information are calculated here, e.g. building parameters and
	475	!> geometrical information, everything that doesn't change in time.
	476	!
	477	!-- Input values
	478	!-- Input datas from Palm, M4
	479	! i_global --> net_sw_in !< global radiation [W/m2]
	480	! theta_e --> pt(k,j,i) !< undisturbed outside temperature, 1. PALM volume, for windows
	481	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
	482	! surf_usm_v(l)%pt_10cm(m) !< Air temperature, facade near (10cm) air temperature from 1. Palm volume
	483	! theta_node --> t_wall_h(nzt_wall,m)
	484	! t_wall_v(l)%t(nzt_wall,m) !< Temperature of innermost wall layer, for opaque wall
	485	!------------------------------------------------------------------------------!
	486	SUBROUTINE im_init
	487
	488	USE control_parameters, &
[4267]	489	ONLY: message_string, time_since_reference_point
[4246]	490
	491	USE indices, &
[4346]	492	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_total_0
[4246]	493
	494	USE grid_variables, &
	495	ONLY: dx, dy
	496
	497	USE pegrid
	498
	499	USE surface_mod, &
	500	ONLY: surf_usm_h, surf_usm_v
	501
	502	USE urban_surface_mod, &
	503	ONLY: building_pars, building_type
	504
[4267]	505	INTEGER(iwp) :: bt !< local building type
	506	INTEGER(iwp) :: day_of_year !< day of the year
	507	INTEGER(iwp) :: i !< running index along x-direction
	508	INTEGER(iwp) :: j !< running index along y-direction
	509	INTEGER(iwp) :: k !< running index along z-direction
	510	INTEGER(iwp) :: l !< running index for surface-element orientation
	511	INTEGER(iwp) :: m !< running index surface elements
	512	INTEGER(iwp) :: n !< building index
	513	INTEGER(iwp) :: nb !< building index
[4246]	514
	515	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
	516	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
	517	!< multiple occurences are sorted out
	518	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	519	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	520	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	521	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
	522	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
	523	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
	524	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
	525	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
	526	!< horizontal facade elements
	527	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
	528	!< vertical facade elements
	529	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
	530	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
	531
	532	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	533	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
	534
	535	REAL(wp) :: u_tmp !< dummy for temporary calculation of u-value without h_is
	536	REAL(wp) :: du_tmp !< 1/u_tmp
	537	REAL(wp) :: du_win_tmp !< 1/building(nb)%u_value_win
	538	REAL(wp) :: facade_area_v !< dummy to compute the total facade area from vertical walls
	539
	540	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
	541	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
	542	!< on local subdomain
	543
	544	CALL location_message( 'initializing indoor model', 'start' )
	545	!
	546	!-- Initializing of indoor model is only possible if buildings can be
	547	!-- distinguished by their IDs.
	548	IF ( .NOT. building_id_f%from_file ) THEN
	549	message_string = 'Indoor model requires information about building_id'
	550	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
	551	ENDIF
	552	!
	553	!-- Determine number of different building IDs on local subdomain.
	554	num_buildings_l = 0
	555	num_buildings = 0
	556	ALLOCATE( build_ids_l(1) )
	557	DO i = nxl, nxr
	558	DO j = nys, nyn
	559	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	560	IF ( num_buildings_l(myid) > 0 ) THEN
	561	IF ( ANY( building_id_f%var(j,i) .EQ. build_ids_l ) ) THEN
	562	CYCLE
	563	ELSE
	564	num_buildings_l(myid) = num_buildings_l(myid) + 1
	565	!
	566	!-- Resize array with different local building ids
	567	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	568	build_ids_l_tmp = build_ids_l
	569	DEALLOCATE( build_ids_l )
	570	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
	571	build_ids_l(1:num_buildings_l(myid)-1) = &
	572	build_ids_l_tmp(1:num_buildings_l(myid)-1)
	573	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	574	DEALLOCATE( build_ids_l_tmp )
	575	ENDIF
	576	!
	577	!-- First occuring building id on PE
	578	ELSE
	579	num_buildings_l(myid) = num_buildings_l(myid) + 1
	580	build_ids_l(1) = building_id_f%var(j,i)
	581	ENDIF
	582	ENDIF
	583	ENDDO
	584	ENDDO
	585	!
	586	!-- Determine number of building IDs for the entire domain. (Note, building IDs
	587	!-- can appear multiple times as buildings might be distributed over several
	588	!-- PEs.)
	589	#if defined( __parallel )
	590	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, &
	591	MPI_INTEGER, MPI_SUM, comm2d, ierr )
	592	#else
	593	num_buildings = num_buildings_l
	594	#endif
	595	ALLOCATE( build_ids(1:SUM(num_buildings)) )
	596	!
	597	!-- Gather building IDs. Therefore, first, determine displacements used
	598	!-- required for MPI_GATHERV call.
	599	ALLOCATE( displace_dum(0:numprocs-1) )
	600	displace_dum(0) = 0
	601	DO i = 1, numprocs-1
	602	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	603	ENDDO
	604
	605	#if defined( __parallel )
	606	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
	607	num_buildings(myid), &
	608	MPI_INTEGER, &
	609	build_ids, &
	610	num_buildings, &
	611	displace_dum, &
	612	MPI_INTEGER, &
	613	comm2d, ierr )
	614
	615	DEALLOCATE( displace_dum )
	616
	617	#else
	618	build_ids = build_ids_l
	619	#endif
	620	!
	621	!-- Note: in parallel mode, building IDs can occur mutliple times, as
	622	!-- each PE has send its own ids. Therefore, sort out building IDs which
	623	!-- appear multiple times.
	624	num_build = 0
	625	DO n = 1, SIZE(build_ids)
	626
	627	IF ( ALLOCATED(build_ids_final) ) THEN
	628	IF ( ANY( build_ids(n) == build_ids_final ) ) THEN
	629	CYCLE
	630	ELSE
	631	num_build = num_build + 1
	632	!
	633	!-- Resize
	634	ALLOCATE( build_ids_final_tmp(1:num_build) )
	635	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	636	DEALLOCATE( build_ids_final )
	637	ALLOCATE( build_ids_final(1:num_build) )
	638	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	639	build_ids_final(num_build) = build_ids(n)
	640	DEALLOCATE( build_ids_final_tmp )
	641	ENDIF
	642	ELSE
	643	num_build = num_build + 1
	644	ALLOCATE( build_ids_final(1:num_build) )
	645	build_ids_final(num_build) = build_ids(n)
	646	ENDIF
	647	ENDDO
	648
	649	!
	650	!-- Allocate building-data structure array. Note, this is a global array
	651	!-- and all building IDs on domain are known by each PE. Further attributes,
	652	!-- e.g. height-dependent arrays, however, are only allocated on PEs where
	653	!-- the respective building is present (in order to reduce memory demands).
	654	ALLOCATE( buildings(1:num_build) )
	655
	656	!
	657	!-- Store building IDs and check if building with certain ID is present on
	658	!-- subdomain.
	659	DO nb = 1, num_build
	660	buildings(nb)%id = build_ids_final(nb)
	661
	662	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
	663	buildings(nb)%on_pe = .TRUE.
	664	ENDDO
	665	!
	666	!-- Determine the maximum vertical dimension occupied by each building.
	667	ALLOCATE( k_min_l(1:num_build) )
	668	ALLOCATE( k_max_l(1:num_build) )
	669	k_min_l = nzt + 1
	670	k_max_l = 0
	671
	672	DO i = nxl, nxr
	673	DO j = nys, nyn
	674	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	675	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	676	DIM = 1 )
	677	DO k = nzb, nzt+1
	678	!
	679	!-- Check if grid point belongs to a building.
[4346]	680	IF ( BTEST( wall_flags_total_0(k,j,i), 6 ) ) THEN
[4246]	681	k_min_l(nb) = MIN( k_min_l(nb), k )
	682	k_max_l(nb) = MAX( k_max_l(nb), k )
	683	ENDIF
	684
	685	ENDDO
	686	ENDIF
	687	ENDDO
	688	ENDDO
	689
	690	#if defined( __parallel )
	691	CALL MPI_ALLREDUCE( k_min_l(:), buildings(:)%kb_min, num_build, &
	692	MPI_INTEGER, MPI_MIN, comm2d, ierr )
	693	CALL MPI_ALLREDUCE( k_max_l(:), buildings(:)%kb_max, num_build, &
	694	MPI_INTEGER, MPI_MAX, comm2d, ierr )
	695	#else
	696	buildings(:)%kb_min = k_min_l(:)
	697	buildings(:)%kb_max = k_max_l(:)
	698	#endif
	699
	700	DEALLOCATE( k_min_l )
	701	DEALLOCATE( k_max_l )
	702	!
	703	!-- Calculate building height.
	704	DO nb = 1, num_build
	705	buildings(nb)%building_height = 0.0_wp
	706	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	707	buildings(nb)%building_height = buildings(nb)%building_height &
	708	+ dzw(k+1)
	709	ENDDO
	710	ENDDO
	711	!
	712	!-- Calculate building volume
	713	DO nb = 1, num_build
	714	!
	715	!-- Allocate temporary array for summing-up building volume
	716	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	717	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	718	volume = 0.0_wp
	719	volume_l = 0.0_wp
	720	!
	721	!-- Calculate building volume per height level on each PE where
	722	!-- these building is present.
	723	IF ( buildings(nb)%on_pe ) THEN
	724
	725	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	726	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	727	buildings(nb)%volume = 0.0_wp
	728	buildings(nb)%vol_frac = 0.0_wp
	729
	730	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
	731	THEN
	732	DO i = nxl, nxr
	733	DO j = nys, nyn
	734	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	735	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
	736	volume_l(k) = volume_l(k) + dx * dy * dzw(k+1)
	737	ENDDO
	738	ENDDO
	739	ENDDO
	740	ENDIF
	741	ENDIF
	742	!
	743	!-- Sum-up building volume from all subdomains
	744	#if defined( __parallel )
	745	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, &
	746	comm2d, ierr )
	747	#else
	748	volume = volume_l
	749	#endif
	750	!
	751	!-- Save total building volume as well as local fraction on volume on
	752	!-- building data structure.
	753	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
	754	!
	755	!-- Determine fraction of local on total building volume
	756	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
	757	!
	758	!-- Calculate total building volume
	759	IF ( ALLOCATED( buildings(nb)%volume ) ) &
	760	buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
	761
	762	DEALLOCATE( volume )
	763	DEALLOCATE( volume_l )
	764
	765	ENDDO
	766	!
	767	!-- Allocate arrays for indoor temperature.
	768	DO nb = 1, num_build
	769	IF ( buildings(nb)%on_pe ) THEN
	770	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	771	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	772	buildings(nb)%t_in = 0.0_wp
	773	buildings(nb)%t_in_l = 0.0_wp
	774	ENDIF
	775	ENDDO
	776	!
	777	!-- Allocate arrays for number of facades per height level. Distinguish between
	778	!-- horizontal and vertical facades.
	779	DO nb = 1, num_build
	780	IF ( buildings(nb)%on_pe ) THEN
	781	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	782	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	783
	784	buildings(nb)%num_facade_h = 0
	785	buildings(nb)%num_facade_v = 0
	786	ENDIF
	787	ENDDO
	788	!
	789	!-- Determine number of facade elements per building on local subdomain.
	790	!-- Distinguish between horizontal and vertical facade elements.
	791	!
	792	!-- Horizontal facades
	793	buildings(:)%num_facades_per_building_h_l = 0
	794	DO m = 1, surf_usm_h%ns
	795	!
	796	!-- For the current facade element determine corresponding building index.
	797	!-- First, obtain j,j,k indices of the building. Please note the
	798	!-- offset between facade/surface element and building location (for
	799	!-- horizontal surface elements the horizontal offsets are zero).
	800	i = surf_usm_h%i(m) + surf_usm_h%ioff
	801	j = surf_usm_h%j(m) + surf_usm_h%joff
	802	k = surf_usm_h%k(m) + surf_usm_h%koff
	803	!
	804	!-- Determine building index and check whether building is on PE
	805	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	806
	807	IF ( buildings(nb)%on_pe ) THEN
	808	!
	809	!-- Count number of facade elements at each height level.
	810	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
	811	!
	812	!-- Moreover, sum up number of local facade elements per building.
	813	buildings(nb)%num_facades_per_building_h_l = &
	814	buildings(nb)%num_facades_per_building_h_l + 1
	815	ENDIF
	816	ENDDO
	817	!
	818	!-- Vertical facades
	819	buildings(:)%num_facades_per_building_v_l = 0
	820	DO l = 0, 3
	821	DO m = 1, surf_usm_v(l)%ns
	822	!
	823	!-- For the current facade element determine corresponding building index.
	824	!-- First, obtain j,j,k indices of the building. Please note the
	825	!-- offset between facade/surface element and building location (for
	826	!-- vertical surface elements the vertical offsets are zero).
	827	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	828	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	829	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	830
	831	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	832	DIM = 1 )
	833	IF ( buildings(nb)%on_pe ) THEN
	834	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
	835	buildings(nb)%num_facades_per_building_v_l = &
	836	buildings(nb)%num_facades_per_building_v_l + 1
	837	ENDIF
	838	ENDDO
	839	ENDDO
	840	!
	841	!-- Determine total number of facade elements per building and assign number to
	842	!-- building data type.
	843	DO nb = 1, num_build
	844	!
	845	!-- Allocate dummy array used for summing-up facade elements.
	846	!-- Please note, dummy arguments are necessary as building-date type
	847	!-- arrays are not necessarily allocated on all PEs.
	848	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	849	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	850	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	851	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	852	num_facades_h = 0
	853	num_facades_v = 0
	854	receive_dum_h = 0
	855	receive_dum_v = 0
	856
	857	IF ( buildings(nb)%on_pe ) THEN
	858	num_facades_h = buildings(nb)%num_facade_h
	859	num_facades_v = buildings(nb)%num_facade_v
	860	ENDIF
	861
	862	#if defined( __parallel )
	863	CALL MPI_ALLREDUCE( num_facades_h, &
	864	receive_dum_h, &
	865	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	866	MPI_INTEGER, &
	867	MPI_SUM, &
	868	comm2d, &
	869	ierr )
	870
	871	CALL MPI_ALLREDUCE( num_facades_v, &
	872	receive_dum_v, &
	873	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	874	MPI_INTEGER, &
	875	MPI_SUM, &
	876	comm2d, &
	877	ierr )
	878	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) &
	879	buildings(nb)%num_facade_h = receive_dum_h
	880	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) &
	881	buildings(nb)%num_facade_v = receive_dum_v
	882	#else
	883	buildings(nb)%num_facade_h = num_facades_h
	884	buildings(nb)%num_facade_v = num_facades_v
	885	#endif
	886
	887	!
	888	!-- Deallocate dummy arrays
	889	DEALLOCATE( num_facades_h )
	890	DEALLOCATE( num_facades_v )
	891	DEALLOCATE( receive_dum_h )
	892	DEALLOCATE( receive_dum_v )
	893	!
	894	!-- Allocate index arrays which link facade elements with surface-data type.
	895	!-- Please note, no height levels are considered here (information is stored
	896	!-- in surface-data type itself).
	897	IF ( buildings(nb)%on_pe ) THEN
	898	!
	899	!-- Determine number of facade elements per building.
	900	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
	901	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
	902	!
	903	!-- Allocate arrays which link the building with the horizontal and vertical
	904	!-- urban-type surfaces. Please note, linking arrays are allocated over all
	905	!-- facade elements, which is required in case a building is located at the
	906	!-- subdomain boundaries, where the building and the corresponding surface
	907	!-- elements are located on different subdomains.
	908	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
	909
	910	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
	911	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
	912	ENDIF
[4402]	913
[4246]	914	IF ( buildings(nb)%on_pe ) THEN
	915	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	916	buildings(nb)%vpf = 0.0_wp
[4402]	917
[4246]	918	facade_area_v = 0.0_wp
	919	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	920	facade_area_v = facade_area_v + buildings(nb)%num_facade_v(k) &
	921	* dzw(k+1) * dx
	922	ENDDO
[4402]	923	!
	924	!-- Determine volume per total facade area (vpf). For the horizontal facade
	925	!-- area num_facades_per_building_h can be taken, multiplied with dx*dy.
	926	!-- However, due to grid stretching, vertical facade elements must be
	927	!-- summed-up vertically. Please note, if dx /= dy, an error is made!
[4246]	928	buildings(nb)%vpf = buildings(nb)%vol_tot / &
	929	( buildings(nb)%num_facades_per_building_h * dx * dy + &
	930	facade_area_v )
[4402]	931	!
	932	!-- Determine floor-area-per-facade.
	933	buildings(nb)%fapf = buildings(nb)%num_facades_per_building_h &
	934	* dx * dy &
	935	/ ( buildings(nb)%num_facades_per_building_h &
	936	* dx * dy + facade_area_v )
[4246]	937	ENDIF
	938	ENDDO
	939	!
	940	!-- Link facade elements with surface data type.
	941	!-- Allocate array for counting.
	942	ALLOCATE( n_fa(1:num_build) )
	943	n_fa = 1
	944
	945	DO m = 1, surf_usm_h%ns
	946	i = surf_usm_h%i(m) + surf_usm_h%ioff
	947	j = surf_usm_h%j(m) + surf_usm_h%joff
	948
	949	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	950
	951	IF ( buildings(nb)%on_pe ) THEN
	952	buildings(nb)%m_h(n_fa(nb)) = m
	953	n_fa(nb) = n_fa(nb) + 1
	954	ENDIF
	955	ENDDO
	956
	957	n_fa = 1
	958	DO l = 0, 3
	959	DO m = 1, surf_usm_v(l)%ns
	960	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	961	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	962
	963	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	964
	965	IF ( buildings(nb)%on_pe ) THEN
	966	buildings(nb)%l_v(n_fa(nb)) = l
	967	buildings(nb)%m_v(n_fa(nb)) = m
	968	n_fa(nb) = n_fa(nb) + 1
	969	ENDIF
	970	ENDDO
	971	ENDDO
	972	DEALLOCATE( n_fa )
	973	!
	974	!-- Initialize building parameters, first by mean building type. Note,
	975	!-- in this case all buildings have the same type.
	976	!-- In a second step initialize with building tpyes from static input file,
	977	!-- where building types can be individual for each building.
[4267]	978	buildings(:)%lambda_layer3 = building_pars(31,building_type)
	979	buildings(:)%s_layer3 = building_pars(44,building_type)
[4246]	980	buildings(:)%f_c_win = building_pars(119,building_type)
	981	buildings(:)%g_value_win = building_pars(120,building_type)
[4267]	982	buildings(:)%u_value_win = building_pars(121,building_type)
[4246]	983	buildings(:)%eta_ve = building_pars(124,building_type)
	984	buildings(:)%factor_a = building_pars(125,building_type)
	985	buildings(:)%factor_c = building_pars(126,building_type)
	986	buildings(:)%lambda_at = building_pars(127,building_type)
[4267]	987	buildings(:)%theta_int_h_set = building_pars(13,building_type)
	988	buildings(:)%theta_int_c_set = building_pars(12,building_type)
[4246]	989	buildings(:)%q_h_max = building_pars(128,building_type)
	990	buildings(:)%q_c_max = building_pars(129,building_type)
	991	buildings(:)%qint_high = building_pars(130,building_type)
	992	buildings(:)%qint_low = building_pars(131,building_type)
	993	buildings(:)%height_storey = building_pars(132,building_type)
	994	buildings(:)%height_cei_con = building_pars(133,building_type)
	995	buildings(:)%params_waste_heat_h = building_pars(134,building_type)
	996	buildings(:)%params_waste_heat_c = building_pars(135,building_type)
	997	!
[4267]	998	!-- Initialize seasonal dependent parameters, depending on day of the year.
	999	!-- First, calculated day of the year.
	1000	CALL get_date_time( time_since_reference_point, day_of_year = day_of_year )
	1001	!
	1002	!-- Summer is defined in between northward- and southward equinox.
	1003	IF ( day_of_year >= northward_equinox .AND. &
	1004	day_of_year <= southward_equinox ) THEN
	1005	buildings(:)%air_change_low = summer_pars(0,building_type)
	1006	buildings(:)%air_change_high = summer_pars(1,building_type)
	1007	ELSE
	1008	buildings(:)%air_change_low = winter_pars(0,building_type)
	1009	buildings(:)%air_change_high = winter_pars(1,building_type)
	1010	ENDIF
	1011	!
[4246]	1012	!-- Initialize ventilaation load. Please note, building types > 7 are actually
	1013	!-- not allowed (check already in urban_surface_mod and netcdf_data_input_mod.
	1014	!-- However, the building data base may be later extended.
	1015	IF ( building_type == 1 .OR. building_type == 2 .OR. &
	1016	building_type == 3 .OR. building_type == 10 .OR. &
	1017	building_type == 11 .OR. building_type == 12 ) THEN
	1018	buildings(:)%ventilation_int_loads = 1
	1019	!
	1020	!-- Office, building with large windows
	1021	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
	1022	building_type == 6 .OR. building_type == 7 .OR. &
	1023	building_type == 8 .OR. building_type == 9) THEN
	1024	buildings(:)%ventilation_int_loads = 2
	1025	!
	1026	!-- Industry, hospitals
	1027	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
	1028	building_type == 15 .OR. building_type == 16 .OR. &
	1029	building_type == 17 .OR. building_type == 18 ) THEN
	1030	buildings(:)%ventilation_int_loads = 3
	1031	ENDIF
	1032	!
	1033	!-- Initialization of building parameters - level 2
	1034	IF ( building_type_f%from_file ) THEN
	1035	DO i = nxl, nxr
	1036	DO j = nys, nyn
	1037	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1038	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	1039	DIM = 1 )
	1040	bt = building_type_f%var(j,i)
	1041
[4267]	1042	buildings(nb)%lambda_layer3 = building_pars(31,bt)
	1043	buildings(nb)%s_layer3 = building_pars(44,bt)
[4246]	1044	buildings(nb)%f_c_win = building_pars(119,bt)
	1045	buildings(nb)%g_value_win = building_pars(120,bt)
	1046	buildings(nb)%u_value_win = building_pars(121,bt)
	1047	buildings(nb)%eta_ve = building_pars(124,bt)
	1048	buildings(nb)%factor_a = building_pars(125,bt)
	1049	buildings(nb)%factor_c = building_pars(126,bt)
	1050	buildings(nb)%lambda_at = building_pars(127,bt)
[4267]	1051	buildings(nb)%theta_int_h_set = building_pars(13,bt)
	1052	buildings(nb)%theta_int_c_set = building_pars(12,bt)
[4246]	1053	buildings(nb)%q_h_max = building_pars(128,bt)
	1054	buildings(nb)%q_c_max = building_pars(129,bt)
	1055	buildings(nb)%qint_high = building_pars(130,bt)
	1056	buildings(nb)%qint_low = building_pars(131,bt)
	1057	buildings(nb)%height_storey = building_pars(132,bt)
	1058	buildings(nb)%height_cei_con = building_pars(133,bt)
	1059	buildings(nb)%params_waste_heat_h = building_pars(134,bt)
	1060	buildings(nb)%params_waste_heat_c = building_pars(135,bt)
[4267]	1061
	1062	IF ( day_of_year >= northward_equinox .AND. &
	1063	day_of_year <= southward_equinox ) THEN
	1064	buildings(nb)%air_change_low = summer_pars(0,bt)
	1065	buildings(nb)%air_change_high = summer_pars(1,bt)
	1066	ELSE
	1067	buildings(nb)%air_change_low = winter_pars(0,bt)
	1068	buildings(nb)%air_change_high = winter_pars(1,bt)
	1069	ENDIF
	1070
[4246]	1071	!
	1072	!-- Initialize ventilaation load. Please note, building types > 7
	1073	!-- are actually not allowed (check already in urban_surface_mod
	1074	!-- and netcdf_data_input_mod. However, the building data base may
	1075	!-- be later extended.
	1076	IF ( bt == 1 .OR. bt == 2 .OR. &
	1077	bt == 3 .OR. bt == 10 .OR. &
	1078	bt == 11 .OR. bt == 12 ) THEN
	1079	buildings(nb)%ventilation_int_loads = 1
	1080	!
	1081	!-- Office, building with large windows
	1082	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
	1083	bt == 6 .OR. bt == 7 .OR. &
	1084	bt == 8 .OR. bt == 9) THEN
	1085	buildings(nb)%ventilation_int_loads = 2
	1086	!
	1087	!-- Industry, hospitals
	1088	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
	1089	bt == 15 .OR. bt == 16 .OR. &
	1090	bt == 17 .OR. bt == 18 ) THEN
	1091	buildings(nb)%ventilation_int_loads = 3
	1092	ENDIF
	1093	ENDIF
	1094	ENDDO
	1095	ENDDO
	1096	ENDIF
	1097	!
	1098	!-- Calculation of surface-related heat transfer coeffiecient
	1099	!-- out of standard u-values from building database
	1100	!-- only amount of extern and surface is used
	1101	!-- otherwise amount between air and surface taken account twice
	1102	DO nb = 1, num_build
	1103	IF ( buildings(nb)%on_pe ) THEN
	1104	du_win_tmp = 1.0_wp / buildings(nb)%u_value_win
	1105	u_tmp = buildings(nb)%u_value_win * ( du_win_tmp / ( du_win_tmp - &
	1106	0.125_wp + ( 1.0_wp / h_is ) ) )
	1107
	1108	du_tmp = 1.0_wp / u_tmp
	1109
[4267]	1110	buildings(nb)%h_es = 1.0_wp / ( du_tmp - ( 1.0_wp / h_is ) )
	1111
[4246]	1112	ENDIF
	1113	ENDDO
	1114	!
	1115	!-- Initial room temperature [K]
	1116	!-- (after first loop, use theta_m_t as theta_m_t_prev)
	1117	theta_m_t_prev = initial_indoor_temperature
	1118	!
	1119	!-- Initialize indoor temperature. Actually only for output at initial state.
	1120	DO nb = 1, num_build
	1121	IF ( buildings(nb)%on_pe ) &
	1122	buildings(nb)%t_in(:) = initial_indoor_temperature
	1123	ENDDO
	1124
	1125	CALL location_message( 'initializing indoor model', 'finished' )
	1126
	1127	END SUBROUTINE im_init
	1128
	1129
	1130	!------------------------------------------------------------------------------!
	1131	! Description:
	1132	! ------------
	1133	!> Main part of the indoor model.
	1134	!> Calculation of .... (kanani: Please describe)
	1135	!------------------------------------------------------------------------------!
	1136	SUBROUTINE im_main_heatcool
	1137
	1138	! USE basic_constants_and_equations_mod, &
	1139	! ONLY: c_p
	1140
	1141	USE control_parameters, &
	1142	ONLY: time_since_reference_point
	1143
	1144	USE grid_variables, &
	1145	ONLY: dx, dy
	1146
	1147	USE pegrid
	1148
	1149	USE surface_mod, &
	1150	ONLY: ind_veg_wall, ind_wat_win, surf_usm_h, surf_usm_v
	1151
	1152	USE urban_surface_mod, &
	1153	ONLY: nzt_wall, t_wall_h, t_wall_v, t_window_h, t_window_v, &
	1154	building_type
	1155
	1156	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
	1157	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
	1158	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
	1159	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
	1160	INTEGER(iwp) :: l !< running index for surface-element orientation
	1161	INTEGER(iwp) :: m !< running index surface elements
	1162	INTEGER(iwp) :: nb !< running index for buildings
	1163	INTEGER(iwp) :: fa !< running index for facade elements of each building
	1164
	1165	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	1166	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
	1167	REAL(wp) :: second_of_day !< second of the current day
	1168	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
	1169
	1170	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
	1171	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
	1172	!
	1173	!-- Determine time of day in hours.
	1174	CALL get_date_time( time_since_reference_point, second_of_day=second_of_day )
	1175	time_utc_hour = second_of_day / seconds_per_hour
	1176	!
	1177	!-- Following calculations must be done for each facade element.
	1178	DO nb = 1, num_build
	1179	!
	1180	!-- First, check whether building is present on local subdomain.
	1181	IF ( buildings(nb)%on_pe ) THEN
	1182	!
	1183	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
	1184	!-- Residental Building, panel WBS 70
	1185	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
[4267]	1186	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1187	schedule_d = 0
	1188	ELSE
[4246]	1189	schedule_d = 1
	1190	ENDIF
	1191	ENDIF
	1192	!
	1193	!-- Office, building with large windows
	1194	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
	1195	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1196	schedule_d = 1
	1197	ELSE
	1198	schedule_d = 0
	1199	ENDIF
	1200	ENDIF
	1201	!
	1202	!-- Industry, hospitals
	1203	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
	1204	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
	1205	schedule_d = 1
	1206	ELSE
	1207	schedule_d = 0
	1208	ENDIF
	1209	ENDIF
	1210	!
	1211	!-- Initialize/reset indoor temperature
	1212	buildings(nb)%t_in_l = 0.0_wp
	1213	!
	1214	!-- Horizontal surfaces
	1215	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1216	!
	1217	!-- Determine index where corresponding surface-type information
	1218	!-- is stored.
	1219	m = buildings(nb)%m_h(fa)
	1220	!
	1221	!-- Determine building height level index.
	1222	kk = surf_usm_h%k(m) + surf_usm_h%koff
[4402]	1223	!
[4246]	1224	!-- Building geometries --> not time-dependent
[4402]	1225	facade_element_area = dx * dy !< [m2] surface area per facade element
	1226	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
	1227	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
[4246]	1228	buildings(nb)%area_facade = facade_element_area * &
	1229	( buildings(nb)%num_facades_per_building_h + &
	1230	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
[4441]	1231	window_area_per_facade = surf_usm_h%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per facade element
[4246]	1232
	1233	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
	1234	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
	1235	a_m = buildings(nb)%factor_a * total_area * &
	1236	( facade_element_area / buildings(nb)%area_facade ) * &
	1237	buildings(nb)%lambda_at !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1238	c_m = buildings(nb)%factor_c * total_area * &
	1239	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
	1240	!
	1241	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1242	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1243
	1244	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
	1245	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
	1246	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
	1247	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1248	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
	1249	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
	1250	!
	1251	!-- internal air loads dependent on the occupacy of the room
	1252	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
	1253	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1254	* floor_area_per_facade )
	1255	q_int = phi_ia / total_area
	1256	!
	1257	!-- Airflow dependent on the occupacy of the room
	1258	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1259	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
	1260	!
	1261	!-- Heat transfer of ventilation
	1262	!-- not less than 0.01 W/K to provide division by 0 in further calculations
	1263	!-- with heat capacity of air 0.33 Wh/m2K
	1264	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1265	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
	1266
	1267	!-- Heat transfer coefficient auxiliary variables
	1268	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1269	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1270	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1271	!
	1272	!-- Net short-wave radiation through window area (was i_global)
	1273	net_sw_in = surf_usm_h%rad_sw_in(m) - surf_usm_h%rad_sw_out(m)
	1274	!
	1275	!-- Quantities needed for im_calc_temperatures
	1276	i = surf_usm_h%i(m)
	1277	j = surf_usm_h%j(m)
	1278	k = surf_usm_h%k(m)
	1279	near_facade_temperature = surf_usm_h%pt_10cm(m)
	1280	indoor_wall_window_temperature = &
[4441]	1281	surf_usm_h%frac(m,ind_veg_wall) * t_wall_h(nzt_wall,m) &
	1282	+ surf_usm_h%frac(m,ind_wat_win) * t_window_h(nzt_wall,m)
[4246]	1283	!
	1284	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1285	!-- threshold parameter (params_solar_protection), sun protection will
	1286	!-- be activated
	1287	IF ( net_sw_in <= params_solar_protection ) THEN
	1288	solar_protection_off = 1
	1289	solar_protection_on = 0
	1290	ELSE
	1291	solar_protection_off = 0
	1292	solar_protection_on = 1
	1293	ENDIF
	1294	!
	1295	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
	1296	!-- DIN 4108 - 2 chap.8
	1297	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1298	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * solar_protection_on ) &
	1299	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1300	q_sol = phi_sol
	1301	!
	1302	!-- Calculation of the mass specific thermal load for internal and external heatsources of the inner node
	1303	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1304	q_c_m = phi_m
	1305	!
	1306	!-- Calculation mass specific thermal load implied non thermal mass
	1307	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1308	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
	1309	q_c_st = phi_st
	1310	!
	1311	!-- Calculations for deriving indoor temperature and heat flux into the wall
	1312	!-- Step 1: Indoor temperature without heating and cooling
	1313	!-- section C.4.1 Picture C.2 zone 3)
	1314	phi_hc_nd = 0.0_wp
	1315
	1316	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1317	near_facade_temperature, phi_hc_nd )
	1318	!
	1319	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
	1320	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. theta_air <= buildings(nb)%theta_int_c_set ) THEN
	1321	phi_hc_nd_ac = 0.0_wp
	1322	phi_hc_nd = phi_hc_nd_ac
	1323	theta_air_ac = theta_air
	1324	!
	1325	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1326	!-- again.
	1327	ELSE
	1328	!
	1329	!-- Temperature not correct, calculation method according to section C4.2
	1330	theta_air_0 = theta_air !< temperature without heating/cooling
	1331	!
	1332	!-- Heating or cooling?
	1333	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1334	theta_air_set = buildings(nb)%theta_int_c_set
	1335	ELSE
	1336	theta_air_set = buildings(nb)%theta_int_h_set
	1337	ENDIF
	1338	!
	1339	!-- Calculate the temperature with phi_hc_nd_10
	1340	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1341	phi_hc_nd = phi_hc_nd_10
	1342
	1343	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1344	near_facade_temperature, phi_hc_nd )
	1345	theta_air_10 = theta_air !< temperature with 10 W/m2 of heating
	1346	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
	1347	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
	1348	!
	1349	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
	1350	!-- If necessary, limit the power to maximum power
	1351	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1352	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
	1353	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
	1354	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
	1355	phi_hc_nd_ac = phi_hc_nd_un
	1356	phi_hc_nd = phi_hc_nd_un
	1357	ELSE
	1358	!
	1359	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
	1360	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1361	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1362	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
	1363	ELSE
	1364	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1365	ENDIF
	1366	ENDIF
	1367	phi_hc_nd = phi_hc_nd_ac
	1368	!
	1369	!-- Calculate the temperature with phi_hc_nd_ac (new)
	1370	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1371	near_facade_temperature, phi_hc_nd )
	1372	theta_air_ac = theta_air
	1373	ENDIF
	1374	!
	1375	!-- Update theta_m_t_prev
	1376	theta_m_t_prev = theta_m_t
	1377
	1378	q_vent = h_v * ( theta_air - near_facade_temperature )
	1379	!
	1380	!-- Calculate the operating temperature with weighted mean temperature of air and mean solar temperature
	1381	!-- Will be used for thermal comfort calculations
	1382	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
	1383	! surf_usm_h%t_indoor(m) = theta_op !< not integrated now
	1384	!
	1385	!-- Heat flux into the wall. Value needed in urban_surface_mod to
	1386	!-- calculate heat transfer through wall layers towards the facade
	1387	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
	1388	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
	1389	/ ( facade_element_area &
	1390	- window_area_per_facade )
	1391	q_trans = q_wall_win * facade_element_area
	1392	!
	1393	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
	1394	surf_usm_h%iwghf_eb(m) = q_wall_win
	1395	surf_usm_h%iwghf_eb_window(m) = q_wall_win
	1396	!
	1397	!-- Sum up operational indoor temperature per kk-level. Further below,
	1398	!-- this temperature is reduced by MPI to one temperature per kk-level
	1399	!-- and building (processor overlapping)
	1400	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1401	!
	1402	!-- Calculation of waste heat
	1403	!-- Anthropogenic heat output
	1404	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
	1405	heating_on = 1
	1406	cooling_on = 0
	1407	ELSE
	1408	heating_on = 0
	1409	cooling_on = -1
	1410	ENDIF
	1411
	1412	q_waste_heat = ( phi_hc_nd * ( &
	1413	buildings(nb)%params_waste_heat_h * heating_on + &
	1414	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1415	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
	1416	surf_usm_h%waste_heat(m) = q_waste_heat
	1417	ENDDO !< Horizontal surfaces loop
	1418	!
	1419	!-- Vertical surfaces
	1420	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1421	!
	1422	!-- Determine indices where corresponding surface-type information
	1423	!-- is stored.
	1424	l = buildings(nb)%l_v(fa)
	1425	m = buildings(nb)%m_v(fa)
	1426	!
	1427	!-- Determine building height level index.
	1428	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	1429	!
	1430	!-- (SOME OF THE FOLLOWING (not time-dependent COULD PROBABLY GO INTO A FUNCTION
	1431	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
	1432	!-- Building geometries --> not time-dependent
[4402]	1433	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk+1) !< [m2] surface area per facade element
	1434	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk+1) !< [m2] surface area per facade element
	1435
	1436	floor_area_per_facade = buildings(nb)%fapf !< [m2/m2] floor area per facade area
	1437	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3/m2] indoor air volume per facade area
[4246]	1438	buildings(nb)%area_facade = facade_element_area * &
	1439	( buildings(nb)%num_facades_per_building_h + &
	1440	buildings(nb)%num_facades_per_building_v ) !< [m2] area of total facade
[4441]	1441	window_area_per_facade = surf_usm_v(l)%frac(m,ind_wat_win) * facade_element_area !< [m2] window area per facade element
[4246]	1442
	1443	buildings(nb)%net_floor_area = buildings(nb)%vol_tot / ( buildings(nb)%height_storey )
	1444	total_area = buildings(nb)%net_floor_area !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
	1445	a_m = buildings(nb)%factor_a * total_area * &
	1446	( facade_element_area / buildings(nb)%area_facade ) * &
	1447	buildings(nb)%lambda_at !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1448	c_m = buildings(nb)%factor_c * total_area * &
	1449	( facade_element_area / buildings(nb)%area_facade ) !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
	1450	!
	1451	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1452	h_t_es = window_area_per_facade * buildings(nb)%h_es !< [W/K] only for windows
	1453
	1454	h_t_is = buildings(nb)%area_facade * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
	1455	h_t_ms = a_m * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
	1456	h_t_wall = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) & !< [W/K]
	1457	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp &
	1458	) + 1.0_wp / h_t_ms ) !< [W/K] opaque components
	1459	h_t_wm = 1.0_wp / ( 1.0_wp / h_t_wall - 1.0_wp / h_t_ms ) !< [W/K] emmision Eq. (63), Section 12.2.2
	1460	!
	1461	!-- internal air loads dependent on the occupacy of the room
	1462	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
	1463	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1464	* floor_area_per_facade )
	1465	q_int = phi_ia
	1466
	1467	!
	1468	!-- Airflow dependent on the occupacy of the room
	1469	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1470	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low )
	1471	!
	1472	!-- Heat transfer of ventilation
	1473	!-- not less than 0.01 W/K to provide division by 0 in further calculations
	1474	!-- with heat capacity of air 0.33 Wh/m2K
	1475	h_v = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1476	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
	1477
	1478	!-- Heat transfer coefficient auxiliary variables
	1479	h_t_1 = 1.0_wp / ( ( 1.0_wp / h_v ) + ( 1.0_wp / h_t_is ) ) !< [W/K] Eq. (C.6)
	1480	h_t_2 = h_t_1 + h_t_es !< [W/K] Eq. (C.7)
	1481	h_t_3 = 1.0_wp / ( ( 1.0_wp / h_t_2 ) + ( 1.0_wp / h_t_ms ) ) !< [W/K] Eq. (C.8)
	1482	!
	1483	!-- Net short-wave radiation through window area (was i_global)
	1484	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
	1485	!
	1486	!-- Quantities needed for im_calc_temperatures
	1487	i = surf_usm_v(l)%i(m)
	1488	j = surf_usm_v(l)%j(m)
	1489	k = surf_usm_v(l)%k(m)
	1490	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
	1491	indoor_wall_window_temperature = &
[4441]	1492	surf_usm_v(l)%frac(m,ind_veg_wall) * t_wall_v(l)%t(nzt_wall,m) &
	1493	+ surf_usm_v(l)%frac(m,ind_wat_win) * t_window_v(l)%t(nzt_wall,m)
[4246]	1494	!
	1495	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1496	!-- threshold parameter (params_solar_protection), sun protection will
	1497	!-- be activated
	1498	IF ( net_sw_in <= params_solar_protection ) THEN
	1499	solar_protection_off = 1
	1500	solar_protection_on = 0
	1501	ELSE
	1502	solar_protection_off = 0
	1503	solar_protection_on = 1
	1504	ENDIF
	1505	!
	1506	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
	1507	!-- DIN 4108 - 2 chap.8
	1508	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1509	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * solar_protection_on ) &
	1510	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1511	q_sol = phi_sol
	1512	!
	1513	!-- Calculation of the mass specific thermal load for internal and external heatsources
	1514	phi_m = (a_m / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1515	q_c_m = phi_m
	1516	!
	1517	!-- Calculation mass specific thermal load implied non thermal mass
	1518	phi_st = ( 1.0_wp - ( a_m / total_area ) - ( h_t_es / ( 9.1_wp * total_area ) ) ) &
	1519	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
	1520	q_c_st = phi_st
	1521	!
	1522	!-- Calculations for deriving indoor temperature and heat flux into the wall
	1523	!-- Step 1: Indoor temperature without heating and cooling
	1524	!-- section C.4.1 Picture C.2 zone 3)
	1525	phi_hc_nd = 0.0_wp
	1526	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1527	near_facade_temperature, phi_hc_nd )
	1528	!
	1529	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
	1530	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. theta_air <= buildings(nb)%theta_int_c_set ) THEN
	1531	phi_hc_nd_ac = 0.0_wp
	1532	phi_hc_nd = phi_hc_nd_ac
	1533	theta_air_ac = theta_air
	1534	!
	1535	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1536	!-- again.
	1537	ELSE
	1538	!
	1539	!-- Temperature not correct, calculation method according to section C4.2
	1540	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1541	!
	1542	!-- Heating or cooling?
	1543	IF ( theta_air_0 > buildings(nb)%theta_int_c_set ) THEN
	1544	theta_air_set = buildings(nb)%theta_int_c_set
	1545	ELSE
	1546	theta_air_set = buildings(nb)%theta_int_h_set
	1547	ENDIF
	1548
	1549	!-- Calculate the temperature with phi_hc_nd_10
	1550	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1551	phi_hc_nd = phi_hc_nd_10
	1552
	1553	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1554	near_facade_temperature, phi_hc_nd )
	1555
	1556	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1557
	1558	phi_hc_nd_un = phi_hc_nd_10 * ( theta_air_set - theta_air_0 ) &
	1559	/ ( theta_air_10 - theta_air_0 ) !< Eq. (C.13)
	1560	!
	1561	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
	1562	!-- If necessary, limit the power to maximum power
	1563	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1564	buildings(nb)%phi_c_max = buildings(nb)%q_c_max * floor_area_per_facade
	1565	buildings(nb)%phi_h_max = buildings(nb)%q_h_max * floor_area_per_facade
	1566	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
	1567	phi_hc_nd_ac = phi_hc_nd_un
	1568	phi_hc_nd = phi_hc_nd_un
	1569	ELSE
	1570	!
	1571	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
	1572	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1573	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1574	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
	1575	ELSE
	1576	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1577	ENDIF
	1578	ENDIF
	1579	phi_hc_nd = phi_hc_nd_ac
	1580	!
	1581	!-- Calculate the temperature with phi_hc_nd_ac (new)
	1582	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1583	near_facade_temperature, phi_hc_nd )
	1584	theta_air_ac = theta_air
	1585	ENDIF
	1586	!
	1587	!-- Update theta_m_t_prev
	1588	theta_m_t_prev = theta_m_t
	1589
	1590	q_vent = h_v * ( theta_air - near_facade_temperature )
	1591	!
	1592	!-- Calculate the operating temperature with weighted mean of temperature of air and mean
	1593	!-- Will be used for thermal comfort calculations
	1594	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
	1595	! surf_usm_v(l)%t_indoor(m) = theta_op !< not integrated yet
	1596	!
	1597	!-- Heat flux into the wall. Value needed in urban_surface_mod to
	1598	!-- calculate heat transfer through wall layers towards the facade
	1599	q_wall_win = h_t_ms * ( theta_s - theta_m ) &
	1600	/ ( facade_element_area &
	1601	- window_area_per_facade )
	1602	q_trans = q_wall_win * facade_element_area
	1603	!
	1604	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
	1605	surf_usm_v(l)%iwghf_eb(m) = q_wall_win
	1606	surf_usm_v(l)%iwghf_eb_window(m) = q_wall_win
	1607	!
	1608	!-- Sum up operational indoor temperature per kk-level. Further below,
	1609	!-- this temperature is reduced by MPI to one temperature per kk-level
	1610	!-- and building (processor overlapping)
	1611	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1612	!
	1613	!-- Calculation of waste heat
	1614	!-- Anthropogenic heat output
	1615	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
	1616	heating_on = 1
	1617	cooling_on = 0
	1618	ELSE
	1619	heating_on = 0
	1620	cooling_on = -1
	1621	ENDIF
	1622
	1623	q_waste_heat = ( phi_hc_nd * ( &
	1624	buildings(nb)%params_waste_heat_h * heating_on + &
	1625	buildings(nb)%params_waste_heat_c * cooling_on ) &
	1626	) / facade_element_area !< [W/m2] , observe the directional convention in PALM!
	1627	surf_usm_v(l)%waste_heat(m) = q_waste_heat
	1628	ENDDO !< Vertical surfaces loop
	1629	ENDIF !< buildings(nb)%on_pe
	1630	ENDDO !< buildings loop
	1631
	1632	!
	1633	!-- Determine the mean building temperature.
	1634	DO nb = 1, num_build
	1635	!
	1636	!-- Allocate dummy array used for summing-up facade elements.
	1637	!-- Please note, dummy arguments are necessary as building-date type
	1638	!-- arrays are not necessarily allocated on all PEs.
	1639	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1640	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1641	t_in_l_send = 0.0_wp
	1642	t_in_recv = 0.0_wp
	1643
	1644	IF ( buildings(nb)%on_pe ) THEN
	1645	t_in_l_send = buildings(nb)%t_in_l
	1646	ENDIF
	1647
	1648
	1649	#if defined( __parallel )
	1650	CALL MPI_ALLREDUCE( t_in_l_send, &
	1651	t_in_recv, &
	1652	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	1653	MPI_REAL, &
	1654	MPI_SUM, &
	1655	comm2d, &
	1656	ierr )
	1657
	1658	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
	1659	buildings(nb)%t_in = t_in_recv
	1660	#else
	1661	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
	1662	buildings(nb)%t_in = buildings(nb)%t_in_l
	1663	#endif
	1664
	1665	IF ( ALLOCATED( buildings(nb)%t_in ) ) THEN
	1666	!
	1667	!-- Average indoor temperature. Note, in case a building is completely
	1668	!-- surrounded by higher buildings, it may have no facade elements
[4299]	1669	!-- at some height levels, which will lead to a divide by zero.
[4246]	1670	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	1671	IF ( buildings(nb)%num_facade_h(k) + &
	1672	buildings(nb)%num_facade_v(k) > 0 ) THEN
	1673	buildings(nb)%t_in(k) = buildings(nb)%t_in(k) / &
	1674	REAL( buildings(nb)%num_facade_h(k) + &
	1675	buildings(nb)%num_facade_v(k), KIND = wp )
	1676	ENDIF
	1677	ENDDO
[4299]	1678	!
	1679	!-- If indoor temperature is not defined because of missing facade
	1680	!-- elements, the values from the above-lying level will be taken.
	1681	!-- At least at the top of the buildings facades are defined, so that
	1682	!-- at least there an indoor temperature is defined. This information
	1683	!-- will propagate downwards the building.
	1684	DO k = buildings(nb)%kb_max-1, buildings(nb)%kb_min, -1
	1685	IF ( buildings(nb)%num_facade_h(k) + &
	1686	buildings(nb)%num_facade_v(k) <= 0 ) THEN
	1687	buildings(nb)%t_in(k) = buildings(nb)%t_in(k+1)
	1688	ENDIF
	1689	ENDDO
[4246]	1690	ENDIF
	1691
	1692
	1693	!
	1694	!-- Deallocate dummy arrays
	1695	DEALLOCATE( t_in_l_send )
	1696	DEALLOCATE( t_in_recv )
	1697
	1698	ENDDO
	1699
	1700	END SUBROUTINE im_main_heatcool
	1701
	1702	!-----------------------------------------------------------------------------!
	1703	! Description:
	1704	!-------------
	1705	!> Check data output for plant canopy model
	1706	!-----------------------------------------------------------------------------!
	1707	SUBROUTINE im_check_data_output( var, unit )
[4402]	1708
[4246]	1709	CHARACTER (LEN=*) :: unit !<
	1710	CHARACTER (LEN=*) :: var !<
	1711
	1712	SELECT CASE ( TRIM( var ) )
	1713
	1714
	1715	CASE ( 'im_hf_roof')
	1716	unit = 'W m-2'
	1717
	1718	CASE ( 'im_hf_wall_win' )
	1719	unit = 'W m-2'
	1720
	1721	CASE ( 'im_hf_wall_win_waste' )
	1722	unit = 'W m-2'
	1723
	1724	CASE ( 'im_hf_roof_waste' )
	1725	unit = 'W m-2'
	1726
	1727	CASE ( 'im_t_indoor_mean' )
	1728	unit = 'K'
	1729
	1730	CASE ( 'im_t_indoor_roof' )
	1731	unit = 'K'
	1732
	1733	CASE ( 'im_t_indoor_wall_win' )
	1734	unit = 'K'
	1735
	1736	CASE DEFAULT
	1737	unit = 'illegal'
	1738
	1739	END SELECT
	1740
	1741	END SUBROUTINE
	1742
	1743
	1744	!-----------------------------------------------------------------------------!
	1745	! Description:
	1746	!-------------
	1747	!> Check parameters routine for plant canopy model
	1748	!-----------------------------------------------------------------------------!
	1749	SUBROUTINE im_check_parameters
	1750
	1751	! USE control_parameters,
	1752	! ONLY: message_string
	1753
	1754	END SUBROUTINE im_check_parameters
	1755
	1756	!-----------------------------------------------------------------------------!
	1757	! Description:
	1758	!-------------
	1759	!> Subroutine defining appropriate grid for netcdf variables.
	1760	!> It is called from subroutine netcdf.
	1761	!-----------------------------------------------------------------------------!
	1762	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
	1763
	1764
	1765	CHARACTER (LEN=*), INTENT(IN) :: var
	1766	LOGICAL, INTENT(OUT) :: found
	1767	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
	1768	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
	1769	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
	1770
	1771	found = .TRUE.
	1772
	1773	!
	1774	!-- Check for the grid
	1775	SELECT CASE ( TRIM( var ) )
	1776
	1777	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
	1778	grid_x = 'x'
	1779	grid_y = 'y'
	1780	grid_z = 'zw'
	1781	!
	1782	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
	1783	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
	1784	grid_x = 'x'
	1785	grid_y = 'y'
	1786	grid_z = 'zu'
	1787
	1788	CASE ( 'im_t_indoor_mean', 'im_t_indoor_roof', 'im_t_indoor_wall_win')
	1789	grid_x = 'x'
	1790	grid_y = 'y'
	1791	grid_z = 'zw'
	1792
	1793	CASE DEFAULT
	1794	found = .FALSE.
	1795	grid_x = 'none'
	1796	grid_y = 'none'
	1797	grid_z = 'none'
	1798	END SELECT
	1799
	1800	END SUBROUTINE im_define_netcdf_grid
	1801
	1802	!------------------------------------------------------------------------------!
	1803	! Description:
	1804	! ------------
	1805	!> Subroutine defining 3D output variables
	1806	!------------------------------------------------------------------------------!
	1807	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, &
	1808	nzb_do, nzt_do )
	1809
[4402]	1810	USE indices
	1811
	1812	USE kinds
	1813
[4246]	1814	CHARACTER (LEN=*) :: variable !<
	1815
	1816	INTEGER(iwp) :: av !<
	1817	INTEGER(iwp) :: i !<
	1818	INTEGER(iwp) :: j !<
	1819	INTEGER(iwp) :: k !<
	1820	INTEGER(iwp) :: l !<
	1821	INTEGER(iwp) :: m !<
	1822	INTEGER(iwp) :: nb !< index of the building in the building data structure
	1823	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
	1824	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
	1825
	1826	LOGICAL :: found !<
	1827
	1828	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
	1829
	1830	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
	1831
	1832	local_pf = fill_value
	1833
	1834	found = .TRUE.
	1835
	1836	SELECT CASE ( TRIM( variable ) )
	1837	!
	1838	!-- Output of indoor temperature. All grid points within the building are
	1839	!-- filled with values, while atmospheric grid points are set to _FillValues.
	1840	CASE ( 'im_t_indoor_mean' )
	1841	IF ( av == 0 ) THEN
	1842	DO i = nxl, nxr
	1843	DO j = nys, nyn
	1844	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1845	!
	1846	!-- Determine index of the building within the building data structure.
	1847	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	1848	DIM = 1 )
	1849	IF ( buildings(nb)%on_pe ) THEN
	1850	!
	1851	!-- Write mean building temperature onto output array. Please note,
	1852	!-- in contrast to many other loops in the output, the vertical
	1853	!-- bounds are determined by the lowest and hightest vertical index
	1854	!-- occupied by the building.
	1855	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	1856	local_pf(i,j,k) = buildings(nb)%t_in(k)
	1857	ENDDO
	1858	ENDIF
	1859	ENDIF
	1860	ENDDO
	1861	ENDDO
	1862	ENDIF
	1863
	1864	CASE ( 'im_hf_roof' )
	1865	IF ( av == 0 ) THEN
	1866	DO m = 1, surf_usm_h%ns
	1867	i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1868	j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1869	k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1870	local_pf(i,j,k) = surf_usm_h%iwghf_eb(m)
	1871	ENDDO
	1872	ENDIF
	1873
	1874	CASE ( 'im_hf_roof_waste' )
	1875	IF ( av == 0 ) THEN
	1876	DO m = 1, surf_usm_h%ns
	1877	i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1878	j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1879	k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1880	local_pf(i,j,k) = surf_usm_h%waste_heat(m)
	1881	ENDDO
	1882	ENDIF
	1883
	1884	CASE ( 'im_hf_wall_win' )
	1885	IF ( av == 0 ) THEN
	1886	DO l = 0, 3
	1887	DO m = 1, surf_usm_v(l)%ns
	1888	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1889	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1890	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1891	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
	1892	ENDDO
	1893	ENDDO
	1894	ENDIF
	1895
	1896	CASE ( 'im_hf_wall_win_waste' )
	1897	IF ( av == 0 ) THEN
	1898	DO l = 0, 3
	1899	DO m = 1, surf_usm_v(l)%ns
	1900	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1901	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1902	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1903	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
	1904	ENDDO
	1905	ENDDO
	1906	ENDIF
	1907
	1908	!
	1909	!< NOTE im_t_indoor_roof and im_t_indoor_wall_win not work yet
	1910
	1911	! CASE ( 'im_t_indoor_roof' )
	1912	! IF ( av == 0 ) THEN
	1913	! DO m = 1, surf_usm_h%ns
	1914	! i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1915	! j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1916	! k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1917	! local_pf(i,j,k) = surf_usm_h%t_indoor(m)
	1918	! ENDDO
	1919	! ENDIF
	1920	!
	1921	! CASE ( 'im_t_indoor_wall_win' )
	1922	! IF ( av == 0 ) THEN
	1923	! DO l = 0, 3
	1924	! DO m = 1, surf_usm_v(l)%ns
	1925	! i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1926	! j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1927	! k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1928	! local_pf(i,j,k) = surf_usm_v(l)%t_indoor(m)
	1929	! ENDDO
	1930	! ENDDO
	1931	! ENDIF
	1932
	1933	CASE DEFAULT
	1934	found = .FALSE.
	1935
	1936	END SELECT
	1937
	1938	END SUBROUTINE im_data_output_3d
	1939	!------------------------------------------------------------------------------!
	1940	! Description:
	1941	! ------------
	1942	!> Parin for &indoor_parameters for indoor model
	1943	!------------------------------------------------------------------------------!
	1944	SUBROUTINE im_parin
	1945
	1946	USE control_parameters, &
	1947	ONLY: indoor_model
	1948
[4402]	1949
[4246]	1950	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
	1951
[4310]	1952	NAMELIST /indoor_parameters/ initial_indoor_temperature
[4246]	1953
	1954	!
	1955	!-- Try to find indoor model package
	1956	REWIND ( 11 )
	1957	line = ' '
	1958	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
	1959	READ ( 11, '(A)', END=10 ) line
	1960	ENDDO
	1961	BACKSPACE ( 11 )
	1962
	1963	!
	1964	!-- Read user-defined namelist
	1965	READ ( 11, indoor_parameters )
	1966	!
	1967	!-- Set flag that indicates that the indoor model is switched on
	1968	indoor_model = .TRUE.
	1969
	1970	!
	1971	!-- Activate spinup (maybe later
	1972	! IF ( spinup_time > 0.0_wp ) THEN
	1973	! coupling_start_time = spinup_time
	1974	! end_time = end_time + spinup_time
	1975	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
	1976	! spinup_pt_mean = pt_surface
	1977	! ENDIF
	1978	! spinup = .TRUE.
	1979	! ENDIF
	1980
	1981	10 CONTINUE
	1982
	1983	END SUBROUTINE im_parin
	1984
	1985
	1986	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |