Home

Context Navigation

source: palm/trunk/SOURCE/indoor_model_mod.f90 @ 3805

Last change on this file since 3805 was 3786, checked in by raasch, 6 years ago
unused variables removed, interoperable C datatypes introduced in particle type to avoid compiler warnings
Property svn:keywords set to `Id`
File size: 84.9 KB

Rev	Line
[3744]	1	!> @file indoor_model_mod.f90
	2	!--------------------------------------------------------------------------------!
	3	! This file is part of the PALM model system.
	4	!
	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
	17	! Copyright 2018-2018 Leibniz Universitaet Hannover
	18	! Copyright 2018-2018 Hochschule Offenburg
	19	!--------------------------------------------------------------------------------!
	20	!
	21	! Current revisions:
	22	! -----------------
[3745]	23	!
	24	!
	25	! Former revisions:
	26	! -----------------
	27	! $Id: indoor_model_mod.f90 3786 2019-03-06 16:58:03Z raasch $
[3786]	28	! unused variables removed
	29	!
	30	! 3759 2019-02-21 15:53:45Z suehring
[3759]	31	! - Calculation of total building volume
	32	! - Several bugfixes
	33	! - Calculation of building height revised
	34	!
	35	! 3745 2019-02-15 18:57:56Z suehring
[3744]	36	! - remove building_type from module
	37	! - initialize parameters for each building individually instead of a bulk
	38	! initializaion with identical building type for all
	39	! - output revised
	40	! - add missing _wp
	41	! - some restructuring of variables in building data structure
	42	!
[3759]	43	! 3744 2019-02-15 18:38:58Z suehring
[3744]	44	! Some interface calls moved to module_interface + cleanup
	45	!
	46	! 3597 2018-12-04 08:40:18Z maronga
	47	! Renamed t_surf_10cm to pt_10cm
	48	!
	49	! 3593 2018-12-03 13:51:13Z kanani
	50	! Replace degree symbol by degree_C
	51	!
	52	! 3524 2018-11-14 13:36:44Z raasch
	53	! working precision added to make code Fortran 2008 conform
	54	!
	55	! 3469 2018-10-30 20:05:07Z kanani
	56	! Initial revision (tlang, suehring, kanani, srissman)
	57	!
	58	!
	59	!
	60	! Authors:
	61	! --------
	62	! @author Tobias Lang
	63	! @author Jens Pfafferott
	64	! @author Farah Kanani-Suehring
	65	! @author Matthias Suehring
	66	! @author Sascha RiÃmann
	67	!
	68	!
	69	! Description:
	70	! ------------
	71	!> <Description of the new module>
	72	!> Module for Indoor Climate Model (ICM)
	73	!> The module is based on the DIN EN ISO 13790 with simplified hour-based procedure.
	74	!> This model is a equivalent circuit diagram of a three-point RC-model (5R1C).
	75	!> This module differ between indoor-air temperature an average temperature of indoor surfaces which make it prossible to determine thermal comfort
	76	!> the heat transfer between indoor and outdoor is simplified
	77
	78	!> @todo Replace window_area_per_facade by %frac(1,m) for window
	79	!> @todo emissivity change for window blinds if solar_protection_on=1
	80	!> @todo write datas in netcdf file as output data
	81	!> @todo reduce the building volume with netto ground surface to take respect costruction areas like walls and ceilings. Have effect on factor_a, factor_c, airchange and lambda_at
	82	!>
	83	!> @note Do we allow use of integer flags, or only logical flags? (concerns e.g. cooling_on, heating_on)
	84	!> @note How to write indoor temperature output to pt array?
	85	!>
	86	!> @bug <Enter known bugs here>
	87	!------------------------------------------------------------------------------!
	88	MODULE indoor_model_mod
	89
	90	USE control_parameters, &
	91	ONLY: initializing_actions
	92
	93	USE kinds
	94
	95	USE netcdf_data_input_mod, &
	96	ONLY: building_id_f, building_type_f
	97
	98	USE surface_mod, &
	99	ONLY: surf_usm_h, surf_usm_v
	100
	101
	102	IMPLICIT NONE
	103
	104	!
	105	!-- Define data structure for buidlings.
	106	TYPE build
	107
[3759]	108	INTEGER(iwp) :: id !< building ID
	109	INTEGER(iwp) :: kb_min !< lowest vertical index of a building
	110	INTEGER(iwp) :: kb_max !< highest vertical index of a building
	111	INTEGER(iwp) :: num_facades_per_building_h = 0 !< total number of horizontal facades elements
	112	INTEGER(iwp) :: num_facades_per_building_h_l = 0 !< number of horizontal facade elements on local subdomain
	113	INTEGER(iwp) :: num_facades_per_building_v = 0 !< total number of vertical facades elements
	114	INTEGER(iwp) :: num_facades_per_building_v_l = 0 !< number of vertical facade elements on local subdomain
[3744]	115
	116	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: l_v !< index array linking surface-element orientation index
	117	!< for vertical surfaces with building
	118	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_h !< index array linking surface-element index for
	119	!< horizontal surfaces with building
	120	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: m_v !< index array linking surface-element index for
	121	!< vertical surfaces with building
	122	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_h !< number of horizontal facade elements per buidling
	123	!< and height level
	124	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facade_v !< number of vertical facades elements per buidling
	125	!< and height level
	126
	127	INTEGER(iwp) :: ventilation_int_loads
	128
	129	LOGICAL :: on_pe = .FALSE. !< flag indicating whether a building with certain ID is on local subdomain
	130
[3759]	131	REAL(wp) :: building_height !< building height
[3744]	132	REAL(wp) :: lambda_layer3 !< [W/(m*K)] Thermal conductivity of the inner layer
	133	REAL(wp) :: s_layer3 !< [m] half thickness of the inner layer (layer_3)
	134	REAL(wp) :: f_c_win !< [-] shading factor
	135	REAL(wp) :: g_value_win !< [-] SHGC factor
	136	REAL(wp) :: u_value_win !< [W/(m2*K)] transmittance
	137	REAL(wp) :: air_change_low !< [1/h] air changes per time_utc_hour
	138	REAL(wp) :: air_change_high !< [1/h] air changes per time_utc_hour
	139	REAL(wp) :: eta_ve !< [-] heat recovery efficiency
	140	REAL(wp) :: factor_a !< [-] Dynamic parameters specific effective surface according to Table 12; 2.5
	141	!< (very light, light and medium), 3.0 (heavy), 3.5 (very heavy)
	142	REAL(wp) :: factor_c !< [J/(m2 K)] Dynamic parameters inner heatstorage according to Table 12; 80000
	143	!< (very light), 110000 (light), 165000 (medium), 260000 (heavy), 370000 (very heavy)
	144	REAL(wp) :: lambda_at !< [-] ratio internal surface/floor area chap. 7.2.2.2.
	145	REAL(wp) :: theta_int_h_set !< [degree_C] Max. Setpoint temperature (winter)
	146	REAL(wp) :: theta_int_c_set !< [degree_C] Max. Setpoint temperature (summer)
	147	REAL(wp) :: phi_h_max !< [W] Max. Heating capacity (negative)
	148	REAL(wp) :: phi_c_max !< [W] Max. Cooling capacity (negative)
	149	REAL(wp) :: qint_high !< [W/m2] internal heat gains, option Database qint_0-23
	150	REAL(wp) :: qint_low !< [W/m2] internal heat gains, option Database qint_0-23
	151	REAL(wp) :: height_storey !< [m] storey heigth
	152	REAL(wp) :: height_cei_con !< [m] ceiling construction heigth
[3759]	153	REAL(wp) :: vol_tot !< total building volume
[3744]	154
	155	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in !< mean building indoor temperature, height dependent
	156	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l !< mean building indoor temperature on local subdomain, height dependent
	157	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume, height dependent
	158	REAL(wp), DIMENSION(:), ALLOCATABLE :: vol_frac !< fraction of local on total building volume, height dependent
	159	REAL(wp), DIMENSION(:), ALLOCATABLE :: vpf !< building volume volume per facade element, height dependent
	160
	161	END TYPE build
	162
	163	TYPE(build), DIMENSION(:), ALLOCATABLE :: buildings !< building array
	164
	165	INTEGER(iwp) :: num_build !< total number of buildings in domain
	166
	167	!
	168	!-- Declare all global variables within the module
	169	INTEGER(iwp) :: cooling_on !< Indoor cooling flag (0=off, 1=on)
	170	INTEGER(iwp) :: heating_on !< Indoor heating flag (0=off, 1=on)
	171	INTEGER(iwp) :: solar_protection_off !< Solar protection off
	172	INTEGER(iwp) :: solar_protection_on !< Solar protection on
	173
	174	REAL(wp) :: eff_mass_area !< [m2] the effective mass-related area
	175	REAL(wp) :: floor_area_per_facade !< [m2] net floor area (Sum of all floors)
	176	REAL(wp) :: total_area !<! [m2] area of all surfaces pointing to zone
	177	REAL(wp) :: window_area_per_facade !< [m2] window area per facade element
	178	REAL(wp) :: air_change !< [1/h] Airflow
	179	REAL(wp) :: facade_element_area !< [m2_facade] building surface facade
	180	REAL(wp) :: indoor_volume_per_facade !< [m3] indoor air volume per facade element
	181	REAL(wp) :: c_m !< [J/K] internal heat storage capacity
	182	REAL(wp) :: dt_indoor = 3600.0_wp !< [s] namelist parameter: time interval for indoor-model application
	183	REAL(wp) :: h_tr_1 !<! [W/K] Heat transfer coefficient auxiliary variable 1
	184	REAL(wp) :: h_tr_2 !<! [W/K] Heat transfer coefficient auxiliary variable 2
	185	REAL(wp) :: h_tr_3 !<! [W/K] Heat transfer coefficient auxiliary variable 3
	186	REAL(wp) :: h_tr_em !<! [W/K] Heat transfer coefficient of the emmision (got with h_tr_ms the thermal mass)
	187	REAL(wp) :: h_tr_is !<! [W/K] thermal coupling conductance (Thermischer Kopplungsleitwert)
	188	REAL(wp) :: h_tr_ms !<! [W/K] Heat transfer conductance term (got with h_tr_em the thermal mass)
	189	REAL(wp) :: h_tr_op !<! [W/K] heat transfer coefficient of opaque components (assumption: got all thermal mass) contains of h_tr_em and h_tr_ms
	190	REAL(wp) :: h_tr_w !<! [W/K] heat transfer coefficient of doors, windows, curtain walls and glazed walls (assumption: thermal mass=0)
	191	REAL(wp) :: h_ve !<! [W/K] heat transfer of ventilation
	192	REAL(wp) :: initial_indoor_temperature !< namelist parameter
	193	REAL(wp) :: net_sw_in !< net short-wave radiation (in - out; was i_global --> CORRECT?)
	194	REAL(wp) :: phi_hc_nd !<! [W] heating demand and/or cooling demand
	195	REAL(wp) :: phi_hc_nd_10 !<! [W] heating demand and/or cooling demand for heating or cooling
	196	REAL(wp) :: phi_hc_nd_ac !<! [W] actual heating demand and/or cooling demand
	197	REAL(wp) :: phi_hc_nd_un !<! [W] unlimited heating demand and/or cooling demand which is necessary to reach the demanded required temperature (heating is positive, cooling is negative)
	198	REAL(wp) :: phi_ia !< [W] internal air load = internal loads * 0.5, Eq. (C.1)
	199	REAL(wp) :: phi_m !<! [W] mass specific thermal load (internal and external)
	200	REAL(wp) :: phi_mtot !<! [W] total mass specific thermal load (internal and external)
	201	REAL(wp) :: phi_sol !< [W] solar loads
	202	REAL(wp) :: phi_st !<! [W] mass specific thermal load implied non thermal mass
[3786]	203	! REAL(wp) :: q_emission !< emissions, in first version = 0, option for second part of the project
[3744]	204	REAL(wp) :: q_wall_win !< heat flux from indoor into wall/window
	205	REAL(wp) :: q_waste_heat !< waste heat, sum of waste heat over the roof to Palm
[3786]	206	! REAL(wp) :: q_waste_heat_bldg !< [W/building] waste heat of the complete building, in Palm sum of all indoor_model-calculations
[3744]	207	REAL(wp) :: schedule_d !< activation for internal loads (low or high + low)
	208	REAL(wp) :: skip_time_do_indoor = 0.0_wp !< [s] Indoor model is not called before this time
	209	REAL(wp) :: theta_air !<! [degree_C] air temperature of the RC-node
	210	REAL(wp) :: theta_air_0 !<! [degree_C] air temperature of the RC-node in equilibrium
	211	REAL(wp) :: theta_air_10 !<! [degree_C] air temperature of the RC-node from a heating capacity of 10 W/m2
	212	REAL(wp) :: theta_air_ac !< [degree_C] actual room temperature after heating/cooling
	213	REAL(wp) :: theta_air_set !< [degree_C] Setpoint_temperature for the room
	214	REAL(wp) :: theta_m !<! [degree_C} inner temperature of the RC-node
	215	REAL(wp) :: theta_m_t !<! [degree_C] (Fictive) component temperature timestep
	216	REAL(wp) :: theta_m_t_prev !< [degree_C] (Fictive) component temperature previous timestep (do not change)
	217	REAL(wp) :: theta_op !< [degree_C] operative temperature
	218	REAL(wp) :: theta_s !<! [degree_C] surface temperature of the RC-node
	219	REAL(wp) :: time_indoor = 0.0_wp !< [s] time since last call of indoor model
[3786]	220	! REAL(wp) :: time_utc_hour !< Time in hours per day (UTC)
[3744]	221
	222	REAL(wp) :: f_sr !< [-] factor surface reduction
	223	REAL(wp) :: f_cei !< [-] ceiling reduction factor
	224	REAL(wp) :: ngs !< [m2] netto ground surface
	225
	226	REAL(wp), PARAMETER :: params_f_f = 0.3_wp !< [-] frame ratio chap. 8.3.2.1.1 for buildings with mostly cooling 2.0_wp
	227	REAL(wp), PARAMETER :: params_f_w = 0.9_wp !< [-] correction factor (fuer nicht senkrechten Stahlungseinfall DIN 4108-2 chap.8, (hier konstant, keine WinkelabhÃ€ngigkeit)
	228	REAL(wp), PARAMETER :: params_f_win = 0.5_wp !< [-] proportion of window area, Database A_win aus Datenbank 27 window_area_per_facade_percent
	229	REAL(wp), PARAMETER :: params_solar_protection = 300.0_wp !< [W/m2] chap. G.5.3.1 sun protection closed, if the radiation on facade exceeds this value
	230	REAL(wp), PARAMETER :: params_waste_heat_c = 4.0_wp !< [-] anthropogenic heat outputs for cooling e.g. 4 for KKM with COP = 3
	231	REAL(wp), PARAMETER :: params_waste_heat_h = 1.111_wp !< [-] anthropogenic heat outputs for heating e.g. 1 / 0.9 = 1.111111 for combustion with eta = 0.9 or -3 for WP with COP = 4
	232	REAL(wp), PARAMETER :: h_is = 3.45_wp !< [W/(m^2 K)] h_is = 3.45 between surface and air (chap. 7.2.2.2)
	233	REAL(wp), PARAMETER :: h_ms = 9.1_wp !< [W/K] h_ms = 9.10 W / (m2 K) between component and surface (chap. 12.2.2)
	234
	235
	236
	237	SAVE
	238
	239
	240	PRIVATE
	241
	242	!
	243	!-- Add INTERFACES that must be available to other modules
	244	PUBLIC im_init, im_main_heatcool, im_parin, im_define_netcdf_grid, &
	245	im_check_data_output, im_data_output_3d, im_check_parameters
	246
	247
	248	!
	249	!-- Add VARIABLES that must be available to other modules
	250	PUBLIC dt_indoor, skip_time_do_indoor, time_indoor
	251
	252	!
	253	!-- PALM interfaces:
	254	!-- Data output checks for 2D/3D data to be done in check_parameters
	255	INTERFACE im_check_data_output
	256	MODULE PROCEDURE im_check_data_output
	257	END INTERFACE im_check_data_output
	258	!
	259	!-- Input parameter checks to be done in check_parameters
	260	INTERFACE im_check_parameters
	261	MODULE PROCEDURE im_check_parameters
	262	END INTERFACE im_check_parameters
	263	!
	264	!-- Data output of 3D data
	265	INTERFACE im_data_output_3d
	266	MODULE PROCEDURE im_data_output_3d
	267	END INTERFACE im_data_output_3d
	268
	269	!
	270	!-- Definition of data output quantities
	271	INTERFACE im_define_netcdf_grid
	272	MODULE PROCEDURE im_define_netcdf_grid
	273	END INTERFACE im_define_netcdf_grid
	274	!
	275	! !
	276	! !-- Output of information to the header file
	277	! INTERFACE im_header
	278	! MODULE PROCEDURE im_header
	279	! END INTERFACE im_header
	280	!
	281	!-- Calculations for indoor temperatures
	282	INTERFACE im_calc_temperatures
	283	MODULE PROCEDURE im_calc_temperatures
	284	END INTERFACE im_calc_temperatures
	285	!
	286	!-- Initialization actions
	287	INTERFACE im_init
	288	MODULE PROCEDURE im_init
	289	END INTERFACE im_init
	290	!
	291	!-- Main part of indoor model
	292	INTERFACE im_main_heatcool
	293	MODULE PROCEDURE im_main_heatcool
	294	END INTERFACE im_main_heatcool
	295	!
	296	!-- Reading of NAMELIST parameters
	297	INTERFACE im_parin
	298	MODULE PROCEDURE im_parin
	299	END INTERFACE im_parin
	300
	301	CONTAINS
	302
	303	!------------------------------------------------------------------------------!
	304	! Description:
	305	! ------------
	306	!< Calculation of the air temperatures and mean radiation temperature
	307	!< This is basis for the operative temperature
	308	!< Based on a Crank-Nicholson scheme with a timestep of a hour
	309	!------------------------------------------------------------------------------!
	310	SUBROUTINE im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	311	near_facade_temperature, phi_hc_nd_dummy )
	312
	313	USE arrays_3d, &
	314	ONLY: pt
	315
	316
	317	IMPLICIT NONE
	318
	319
	320	INTEGER(iwp) :: i
	321	INTEGER(iwp) :: j
	322	INTEGER(iwp) :: k
	323
	324	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	325	REAL(wp) :: near_facade_temperature
	326	REAL(wp) :: phi_hc_nd_dummy
	327
	328
	329	!< Calculation of total mass specific thermal load (internal and external)
	330	phi_mtot = ( phi_m + h_tr_em * indoor_wall_window_temperature &
	331	+ h_tr_3 * ( phi_st + h_tr_w * pt(k,j,i) &
	332	+ h_tr_1 * &
	333	( ( ( phi_ia + phi_hc_nd_dummy ) / h_ve ) &
	334	+ near_facade_temperature ) &
	335	) / h_tr_2 &
	336	) !< [degree_C] Eq. (C.5)
	337
	338	!< Calculation of component temperature at factual timestep
	339	theta_m_t = ( ( theta_m_t_prev &
	340	* ( ( c_m / 3600.0_wp ) - 0.5_wp * ( h_tr_3 + h_tr_em ) ) + phi_mtot &
	341	) &
	342	/ ( ( c_m / 3600.0_wp ) + 0.5_wp * ( h_tr_3 + h_tr_em ) ) &
	343	) !< [degree_C] Eq. (C.4)
	344
	345	!< Calculation of mean inner temperature for the RC-node in actual timestep
	346	theta_m = ( theta_m_t + theta_m_t_prev ) * 0.5_wp !< [degree_C] Eq. (C.9)
	347
	348	!< Calculation of mean surface temperature of the RC-node in actual timestep
	349	theta_s = ( ( h_tr_ms * theta_m + phi_st + h_tr_w * pt(k,j,i) &
	350	+ h_tr_1 * ( near_facade_temperature + ( phi_ia + phi_hc_nd_dummy ) / h_ve ) &
	351	) &
	352	/ ( h_tr_ms + h_tr_w + h_tr_1 ) &
	353	) !< [degree_C] Eq. (C.10)
	354
	355	!< Calculation of the air temperature of the RC-node
	356	theta_air = ( h_tr_is * theta_s + h_ve * near_facade_temperature &
	357	+ phi_ia + phi_hc_nd_dummy ) / ( h_tr_is + h_ve ) !< [degree_C] Eq. (C.11)
	358
	359	END SUBROUTINE im_calc_temperatures
	360
	361	!------------------------------------------------------------------------------!
	362	! Description:
	363	! ------------
	364	!> Initialization of the indoor model.
	365	!> Static information are calculated here, e.g. building parameters and
	366	!> geometrical information, everything that doesn't change in time.
	367	!
	368	!-- Input values
	369	!-- Input datas from Palm, M4
	370	! i_global --> net_sw_in !global radiation [W/m2]
	371	! theta_e --> pt(k,j,i) !undisturbed outside temperature, 1. PALM volume, for windows
	372	! theta_sup = theta_f --> surf_usm_h%pt_10cm(m)
	373	! surf_usm_v(l)%pt_10cm(m) !Air temperature, facade near (10cm) air temperature from 1. Palm volume
	374	! theta_node --> t_wall_h(nzt_wall,m)
	375	! t_wall_v(l)%t(nzt_wall,m) !Temperature of innermost wall layer, for opaque wall
	376	!------------------------------------------------------------------------------!
	377	SUBROUTINE im_init
	378
	379	USE arrays_3d, &
	380	ONLY: dzw
	381
	382	USE control_parameters, &
	383	ONLY: message_string
	384
	385	USE indices, &
	386	ONLY: nxl, nxr, nyn, nys, nzb, nzt, wall_flags_0
	387
	388	USE grid_variables, &
	389	ONLY: dx, dy
	390
	391	USE pegrid
	392
	393	USE surface_mod, &
	394	ONLY: surf_usm_h, surf_usm_v
	395
	396	USE urban_surface_mod, &
	397	ONLY: building_pars, building_type
	398
	399	IMPLICIT NONE
	400
	401	INTEGER(iwp) :: bt !< local building type
	402	INTEGER(iwp) :: i !< running index along x-direction
	403	INTEGER(iwp) :: j !< running index along y-direction
	404	INTEGER(iwp) :: k !< running index along z-direction
	405	INTEGER(iwp) :: l !< running index for surface-element orientation
	406	INTEGER(iwp) :: m !< running index surface elements
	407	INTEGER(iwp) :: n !< building index
	408	INTEGER(iwp) :: nb !< building index
	409
	410	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids !< building IDs on entire model domain
	411	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final !< building IDs on entire model domain,
	412	!< multiple occurences are sorted out
	413	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_final_tmp !< temporary array used for resizing
	414	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l !< building IDs on local subdomain
	415	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: build_ids_l_tmp !< temporary array used to resize array of building IDs
	416	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: displace_dum !< displacements of start addresses, used for MPI_ALLGATHERV
	417	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_max_l !< highest vertical index of a building on subdomain
	418	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: k_min_l !< lowest vertical index of a building on subdomain
	419	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: n_fa !< counting array
	420	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_h !< dummy array used for summing-up total number of
	421	!< horizontal facade elements
	422	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: num_facades_v !< dummy array used for summing-up total number of
	423	!< vertical facade elements
	424	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_h !< dummy array used for MPI_ALLREDUCE
	425	INTEGER(iwp), DIMENSION(:), ALLOCATABLE :: receive_dum_v !< dummy array used for MPI_ALLREDUCE
	426
	427	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings !< number of buildings with different ID on entire model domain
	428	INTEGER(iwp), DIMENSION(0:numprocs-1) :: num_buildings_l !< number of buildings with different ID on local subdomain
	429
	430	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume !< total building volume at each discrete height level
	431	REAL(wp), DIMENSION(:), ALLOCATABLE :: volume_l !< total building volume at each discrete height level,
	432	!< on local subdomain
	433
	434	CALL location_message( 'initializing indoor model', .FALSE. )
	435
	436	!
	437	!-- Initializing of indoor model is only possible if buildings can be
	438	!-- distinguished by their IDs.
	439	IF ( .NOT. building_id_f%from_file ) THEN
	440	message_string = 'Indoor model requires information about building_id'
	441	CALL message( 'im_init', 'PA0999', 1, 2, 0, 6, 0 )
	442	ENDIF
	443	!
	444	!-- Determine number of different building IDs on local subdomain.
	445	num_buildings_l = 0
	446	num_buildings = 0
	447	ALLOCATE( build_ids_l(1) )
	448	DO i = nxl, nxr
	449	DO j = nys, nyn
	450	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	451	IF ( num_buildings_l(myid) > 0 ) THEN
	452	IF ( ANY( building_id_f%var(j,i) .EQ. build_ids_l ) ) THEN
	453	CYCLE
	454	ELSE
	455	num_buildings_l(myid) = num_buildings_l(myid) + 1
	456	!
	457	!-- Resize array with different local building ids
	458	ALLOCATE( build_ids_l_tmp(1:SIZE(build_ids_l)) )
	459	build_ids_l_tmp = build_ids_l
	460	DEALLOCATE( build_ids_l )
	461	ALLOCATE( build_ids_l(1:num_buildings_l(myid)) )
	462	build_ids_l(1:num_buildings_l(myid)-1) = &
	463	build_ids_l_tmp(1:num_buildings_l(myid)-1)
	464	build_ids_l(num_buildings_l(myid)) = building_id_f%var(j,i)
	465	DEALLOCATE( build_ids_l_tmp )
	466	ENDIF
	467	!
	468	!-- First occuring building id on PE
	469	ELSE
	470	num_buildings_l(myid) = num_buildings_l(myid) + 1
	471	build_ids_l(1) = building_id_f%var(j,i)
	472	ENDIF
	473	ENDIF
	474	ENDDO
	475	ENDDO
	476	!
	477	!-- Determine number of building IDs for the entire domain. (Note, building IDs
	478	!-- can appear multiple times as buildings might be distributed over several
	479	!-- PEs.)
	480	#if defined( __parallel )
	481	CALL MPI_ALLREDUCE( num_buildings_l, num_buildings, numprocs, &
	482	MPI_INTEGER, MPI_SUM, comm2d, ierr )
	483	#else
	484	num_buildings = num_buildings_l
	485	#endif
	486	ALLOCATE( build_ids(1:SUM(num_buildings)) )
	487	!
	488	!-- Gather building IDs. Therefore, first, determine displacements used
	489	!-- required for MPI_GATHERV call.
	490	ALLOCATE( displace_dum(0:numprocs-1) )
	491	displace_dum(0) = 0
	492	DO i = 1, numprocs-1
	493	displace_dum(i) = displace_dum(i-1) + num_buildings(i-1)
	494	ENDDO
	495
	496	#if defined( __parallel )
	497	CALL MPI_ALLGATHERV( build_ids_l(1:num_buildings_l(myid)), &
	498	num_buildings(myid), &
	499	MPI_INTEGER, &
	500	build_ids, &
	501	num_buildings, &
	502	displace_dum, &
	503	MPI_INTEGER, &
	504	comm2d, ierr )
	505
	506	DEALLOCATE( displace_dum )
	507
	508	#else
	509	build_ids = build_ids_l
	510	#endif
	511	!
	512	!-- Note: in parallel mode, building IDs can occur mutliple times, as
	513	!-- each PE has send its own ids. Therefore, sort out building IDs which
	514	!-- appear multiple times.
	515	num_build = 0
	516	DO n = 1, SIZE(build_ids)
	517
	518	IF ( ALLOCATED(build_ids_final) ) THEN
	519	IF ( ANY( build_ids(n) .EQ. build_ids_final ) ) THEN !FK: Warum ANY?, Warum .EQ.? --> s.o
	520	CYCLE
	521	ELSE
	522	num_build = num_build + 1
	523	!
	524	!-- Resize
	525	ALLOCATE( build_ids_final_tmp(1:num_build) )
	526	build_ids_final_tmp(1:num_build-1) = build_ids_final(1:num_build-1)
	527	DEALLOCATE( build_ids_final )
	528	ALLOCATE( build_ids_final(1:num_build) )
	529	build_ids_final(1:num_build-1) = build_ids_final_tmp(1:num_build-1)
	530	build_ids_final(num_build) = build_ids(n)
	531	DEALLOCATE( build_ids_final_tmp )
	532	ENDIF
	533	ELSE
	534	num_build = num_build + 1
	535	ALLOCATE( build_ids_final(1:num_build) )
	536	build_ids_final(num_build) = build_ids(n)
	537	ENDIF
	538	ENDDO
	539
	540	!
	541	!-- Allocate building-data structure array. Note, this is a global array
	542	!-- and all building IDs on domain are known by each PE. Further attributes,
	543	!-- e.g. height-dependent arrays, however, are only allocated on PEs where
	544	!-- the respective building is present (in order to reduce memory demands).
	545	ALLOCATE( buildings(1:num_build) )
	546
	547	!
	548	!-- Store building IDs and check if building with certain ID is present on
	549	!-- subdomain.
	550	DO nb = 1, num_build
	551	buildings(nb)%id = build_ids_final(nb)
	552
[3759]	553	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
[3744]	554	buildings(nb)%on_pe = .TRUE.
	555	ENDDO
	556	!
	557	!-- Determine the maximum vertical dimension occupied by each building.
	558	ALLOCATE( k_min_l(1:num_build) )
	559	ALLOCATE( k_max_l(1:num_build) )
	560	k_min_l = nzt + 1
	561	k_max_l = 0
	562
	563	DO i = nxl, nxr
	564	DO j = nys, nyn
	565	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
[3759]	566	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
[3744]	567	DIM = 1 )
	568	DO k = nzb+1, nzt+1
	569	!
	570	!-- Check if grid point belongs to a building.
	571	IF ( BTEST( wall_flags_0(k,j,i), 6 ) ) THEN
	572	k_min_l(nb) = MIN( k_min_l(nb), k )
	573	k_max_l(nb) = MAX( k_max_l(nb), k )
	574	ENDIF
	575
	576	ENDDO
	577	ENDIF
	578	ENDDO
	579	ENDDO
	580
	581	DO nb = 1, num_build
	582	#if defined( __parallel )
	583	CALL MPI_ALLREDUCE( k_min_l(nb), buildings(nb)%kb_min, 1, MPI_INTEGER, &
	584	MPI_MIN, comm2d, ierr )
	585	CALL MPI_ALLREDUCE( k_max_l(nb), buildings(nb)%kb_max, 1, MPI_INTEGER, &
	586	MPI_MAX, comm2d, ierr )
	587	#else
	588	buildings(nb)%kb_min = k_min_l(nb)
	589	buildings(nb)%kb_max = k_max_l(nb)
	590	#endif
	591
	592	ENDDO
	593
	594	DEALLOCATE( k_min_l )
	595	DEALLOCATE( k_max_l )
	596	!
[3759]	597	!-- Calculate building height.
	598	DO nb = 1, num_build
	599	buildings(nb)%building_height = 0.0_wp
	600	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	601	buildings(nb)%building_height = buildings(nb)%building_height &
	602	+ dzw(k)
	603	ENDDO
	604	ENDDO
	605	!
[3744]	606	!-- Calculate building volume
	607	DO nb = 1, num_build
	608	!
	609	!-- Allocate temporary array for summing-up building volume
	610	ALLOCATE( volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	611	ALLOCATE( volume_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	612	volume = 0.0_wp
	613	volume_l = 0.0_wp
	614	!
	615	!-- Calculate building volume per height level on each PE where
	616	!-- these building is present.
	617	IF ( buildings(nb)%on_pe ) THEN
	618	ALLOCATE( buildings(nb)%volume(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	619	ALLOCATE( buildings(nb)%vol_frac(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	620	buildings(nb)%volume = 0.0_wp
	621	buildings(nb)%vol_frac = 0.0_wp
	622
[3759]	623	IF ( ANY( building_id_f%var(nys:nyn,nxl:nxr) == buildings(nb)%id ) ) &
	624	THEN
[3744]	625	DO i = nxl, nxr
	626	DO j = nys, nyn
	627	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	628	IF ( building_id_f%var(j,i) /= building_id_f%fill ) &
[3759]	629	volume_l(k) = volume_l(k) + dx * dy * dzw(k)
[3744]	630	ENDDO
	631	ENDDO
	632	ENDDO
	633	ENDIF
	634	ENDIF
	635	!
	636	!-- Sum-up building volume from all subdomains
	637	#if defined( __parallel )
	638	CALL MPI_ALLREDUCE( volume_l, volume, SIZE(volume), MPI_REAL, MPI_SUM, &
	639	comm2d, ierr )
	640	#else
	641	volume = volume_l
	642	#endif
	643	!
	644	!-- Save total building volume as well as local fraction on volume on
	645	!-- building data structure.
	646	IF ( ALLOCATED( buildings(nb)%volume ) ) buildings(nb)%volume = volume
	647	!
	648	!-- Determine fraction of local on total building volume
	649	IF ( buildings(nb)%on_pe ) buildings(nb)%vol_frac = volume_l / volume
[3759]	650	!
	651	!-- Calculate total building volume
	652	IF ( ALLOCATED( buildings(nb)%volume ) ) &
	653	buildings(nb)%vol_tot = SUM( buildings(nb)%volume )
	654
[3744]	655	DEALLOCATE( volume )
	656	DEALLOCATE( volume_l )
	657
	658	ENDDO
	659
	660	!
	661	!-- Allocate arrays for indoor temperature.
	662	DO nb = 1, num_build
	663	IF ( buildings(nb)%on_pe ) THEN
	664	ALLOCATE( buildings(nb)%t_in(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	665	ALLOCATE( buildings(nb)%t_in_l(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	666	buildings(nb)%t_in = 0.0_wp
	667	buildings(nb)%t_in_l = 0.0_wp
	668	ENDIF
	669	ENDDO
	670	!
	671	!-- Allocate arrays for number of facades per height level. Distinguish between
	672	!-- horizontal and vertical facades.
	673	DO nb = 1, num_build
	674	IF ( buildings(nb)%on_pe ) THEN
	675	ALLOCATE( buildings(nb)%num_facade_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	676	ALLOCATE( buildings(nb)%num_facade_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	677
	678	buildings(nb)%num_facade_h = 0
	679	buildings(nb)%num_facade_v = 0
	680	ENDIF
	681	ENDDO
	682	!
	683	!-- Determine number of facade elements per building on local subdomain.
	684	!-- Distinguish between horizontal and vertical facade elements.
	685	!
	686	!-- Horizontal facades
	687	buildings(:)%num_facades_per_building_h_l = 0
	688	DO m = 1, surf_usm_h%ns
	689	!
	690	!-- For the current facade element determine corresponding building index.
	691	!-- First, obtain j,j,k indices of the building. Please note the
	692	!-- offset between facade/surface element and building location (for
	693	!-- horizontal surface elements the horizontal offsets are zero).
	694	i = surf_usm_h%i(m) + surf_usm_h%ioff
	695	j = surf_usm_h%j(m) + surf_usm_h%joff
	696	k = surf_usm_h%k(m) + surf_usm_h%koff
	697	!
	698	!-- Determine building index and check whether building is on PE
	699	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	700	IF ( buildings(nb)%on_pe ) THEN
	701	!
	702	!-- Count number of facade elements at each height level.
	703	buildings(nb)%num_facade_h(k) = buildings(nb)%num_facade_h(k) + 1
	704	!
	705	!-- Moreover, sum up number of local facade elements per building.
	706	buildings(nb)%num_facades_per_building_h_l = &
	707	buildings(nb)%num_facades_per_building_h_l + 1
	708	ENDIF
	709	ENDDO
	710	!
	711	!-- Vertical facades
	712	buildings(:)%num_facades_per_building_v_l = 0
	713	DO l = 0, 3
	714	DO m = 1, surf_usm_v(l)%ns
	715	!
	716	!-- For the current facade element determine corresponding building index.
	717	!-- First, obtain j,j,k indices of the building. Please note the
	718	!-- offset between facade/surface element and building location (for
	719	!-- vertical surface elements the vertical offsets are zero).
	720	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	721	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	722	k = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	723
	724	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	725	DIM = 1 )
	726	IF ( buildings(nb)%on_pe ) THEN
	727	buildings(nb)%num_facade_v(k) = buildings(nb)%num_facade_v(k) + 1
	728	buildings(nb)%num_facades_per_building_v_l = &
	729	buildings(nb)%num_facades_per_building_v_l + 1
	730	ENDIF
	731	ENDDO
	732	ENDDO
	733
	734	!
	735	!-- Determine total number of facade elements per building and assign number to
	736	!-- building data type.
	737	DO nb = 1, num_build
	738	!
	739	!-- Allocate dummy array used for summing-up facade elements.
	740	!-- Please note, dummy arguments are necessary as building-date type
	741	!-- arrays are not necessarily allocated on all PEs.
	742	ALLOCATE( num_facades_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	743	ALLOCATE( num_facades_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	744	ALLOCATE( receive_dum_h(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	745	ALLOCATE( receive_dum_v(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	746	num_facades_h = 0
	747	num_facades_v = 0
	748	receive_dum_h = 0
	749	receive_dum_v = 0
	750
	751	IF ( buildings(nb)%on_pe ) THEN
	752	num_facades_h = buildings(nb)%num_facade_h
	753	num_facades_v = buildings(nb)%num_facade_v
	754	ENDIF
	755
	756	#if defined( __parallel )
	757	CALL MPI_ALLREDUCE( num_facades_h, &
	758	receive_dum_h, &
	759	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	760	MPI_INTEGER, &
	761	MPI_SUM, &
	762	comm2d, &
	763	ierr )
	764
	765	CALL MPI_ALLREDUCE( num_facades_v, &
	766	receive_dum_v, &
	767	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	768	MPI_INTEGER, &
	769	MPI_SUM, &
	770	comm2d, &
	771	ierr )
	772	IF ( ALLOCATED( buildings(nb)%num_facade_h ) ) & !FK: Was wenn not allocated? --> s.o.
	773	buildings(nb)%num_facade_h = receive_dum_h
	774	IF ( ALLOCATED( buildings(nb)%num_facade_v ) ) &
	775	buildings(nb)%num_facade_v = receive_dum_v
	776	#else
	777	buildings(nb)%num_facade_h = num_facades_h
	778	buildings(nb)%num_facade_v = num_facades_v
	779	#endif
	780	!
	781	!-- Deallocate dummy arrays
	782	DEALLOCATE( num_facades_h )
	783	DEALLOCATE( num_facades_v )
	784	DEALLOCATE( receive_dum_h )
	785	DEALLOCATE( receive_dum_v )
	786	!
	787	!-- Allocate index arrays which link facade elements with surface-data type.
	788	!-- Please note, no height levels are considered here (information is stored
	789	!-- in surface-data type itself).
	790	IF ( buildings(nb)%on_pe ) THEN
	791	!
	792	!-- Determine number of facade elements per building.
	793	buildings(nb)%num_facades_per_building_h = SUM( buildings(nb)%num_facade_h )
	794	buildings(nb)%num_facades_per_building_v = SUM( buildings(nb)%num_facade_v )
	795	!
	796	!-- Allocate arrays which link the building with the horizontal and vertical
	797	!-- urban-type surfaces. Please note, linking arrays are allocated over all
	798	!-- facade elements, which is required in case a building is located at the
	799	!-- subdomain boundaries, where the building and the corresponding surface
	800	!-- elements are located on different subdomains.
	801	ALLOCATE( buildings(nb)%m_h(1:buildings(nb)%num_facades_per_building_h_l) )
	802
	803	ALLOCATE( buildings(nb)%l_v(1:buildings(nb)%num_facades_per_building_v_l) )
	804	ALLOCATE( buildings(nb)%m_v(1:buildings(nb)%num_facades_per_building_v_l) )
	805	ENDIF
	806	!
	807	!-- Determine volume per facade element (vpf)
	808	IF ( buildings(nb)%on_pe ) THEN
	809	ALLOCATE( buildings(nb)%vpf(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	810
	811	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	812	buildings(nb)%vpf(k) = buildings(nb)%volume(k) / &
	813	( buildings(nb)%num_facade_h(k) + &
	814	buildings(nb)%num_facade_v(k) )
	815	ENDDO
	816	ENDIF
	817	ENDDO
	818	!
	819	!-- Link facade elements with surface data type.
	820	!-- Allocate array for counting.
	821	ALLOCATE( n_fa(1:num_build) )
	822	n_fa = 1
	823
	824	DO m = 1, surf_usm_h%ns
	825	i = surf_usm_h%i(m) + surf_usm_h%ioff
	826	j = surf_usm_h%j(m) + surf_usm_h%joff
	827
	828	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	829
[3759]	830	IF ( buildings(nb)%on_pe ) THEN
	831	buildings(nb)%m_h(n_fa(nb)) = m
	832	n_fa(nb) = n_fa(nb) + 1
	833	ENDIF
[3744]	834	ENDDO
	835
	836	n_fa = 1
	837	DO l = 0, 3
	838	DO m = 1, surf_usm_v(l)%ns
	839	i = surf_usm_v(l)%i(m) + surf_usm_v(l)%ioff
	840	j = surf_usm_v(l)%j(m) + surf_usm_v(l)%joff
	841
	842	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), DIM = 1 )
	843
[3759]	844	IF ( buildings(nb)%on_pe ) THEN
	845	buildings(nb)%l_v(n_fa(nb)) = l
	846	buildings(nb)%m_v(n_fa(nb)) = m
	847	n_fa(nb) = n_fa(nb) + 1
	848	ENDIF
[3744]	849	ENDDO
	850	ENDDO
	851	DEALLOCATE( n_fa )
	852
	853	!
	854	!-- Initialize building parameters, first by mean building type. Note,
	855	!-- in this case all buildings have the same type.
	856	!-- In a second step initialize with building tpyes from static input file,
	857	!-- where building types can be individual for each building.
	858	buildings(:)%lambda_layer3 = building_pars(63,building_type)
	859	buildings(:)%s_layer3 = building_pars(57,building_type)
	860	buildings(:)%f_c_win = building_pars(119,building_type)
	861	buildings(:)%g_value_win = building_pars(120,building_type)
	862	buildings(:)%u_value_win = building_pars(121,building_type)
	863	buildings(:)%air_change_low = building_pars(122,building_type)
	864	buildings(:)%air_change_high = building_pars(123,building_type)
	865	buildings(:)%eta_ve = building_pars(124,building_type)
	866	buildings(:)%factor_a = building_pars(125,building_type)
	867	buildings(:)%factor_c = building_pars(126,building_type)
	868	buildings(:)%lambda_at = building_pars(127,building_type)
	869	buildings(:)%theta_int_h_set = building_pars(118,building_type)
	870	buildings(:)%theta_int_c_set = building_pars(117,building_type)
	871	buildings(:)%phi_h_max = building_pars(128,building_type)
	872	buildings(:)%phi_c_max = building_pars(129,building_type)
	873	buildings(:)%qint_high = building_pars(130,building_type)
	874	buildings(:)%qint_low = building_pars(131,building_type)
	875	buildings(:)%height_storey = building_pars(132,building_type)
	876	buildings(:)%height_cei_con = building_pars(133,building_type)
	877	!
	878	!-- Initialize ventilaation load. Please note, building types > 7 are actually
	879	!-- not allowed (check already in urban_surface_mod and netcdf_data_input_mod.
	880	!-- However, the building data base may be later extended.
	881	IF ( building_type == 1 .OR. building_type == 2 .OR. &
	882	building_type == 3 .OR. building_type == 10 .OR. &
	883	building_type == 11 .OR. building_type == 12 ) THEN
	884	buildings(nb)%ventilation_int_loads = 1
	885	!
	886	!-- Office, building with large windows
	887	ELSEIF ( building_type == 4 .OR. building_type == 5 .OR. &
	888	building_type == 6 .OR. building_type == 7 .OR. &
	889	building_type == 8 .OR. building_type == 9) THEN
	890	buildings(nb)%ventilation_int_loads = 2
	891	!
	892	!-- Industry, hospitals
	893	ELSEIF ( building_type == 13 .OR. building_type == 14 .OR. &
	894	building_type == 15 .OR. building_type == 16 .OR. &
	895	building_type == 17 .OR. building_type == 18 ) THEN
	896	buildings(nb)%ventilation_int_loads = 3
	897	ENDIF
	898	!
	899	!-- Initialization of building parameters - level 2
	900	IF ( building_type_f%from_file ) THEN
	901	DO i = nxl, nxr
	902	DO j = nys, nyn
	903	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	904	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	905	DIM = 1 )
	906	bt = building_type_f%var(j,i)
	907
	908	buildings(nb)%lambda_layer3 = building_pars(63,bt)
	909	buildings(nb)%s_layer3 = building_pars(57,bt)
	910	buildings(nb)%f_c_win = building_pars(119,bt)
	911	buildings(nb)%g_value_win = building_pars(120,bt)
	912	buildings(nb)%u_value_win = building_pars(121,bt)
	913	buildings(nb)%air_change_low = building_pars(122,bt)
	914	buildings(nb)%air_change_high = building_pars(123,bt)
	915	buildings(nb)%eta_ve = building_pars(124,bt)
	916	buildings(nb)%factor_a = building_pars(125,bt)
	917	buildings(nb)%factor_c = building_pars(126,bt)
	918	buildings(nb)%lambda_at = building_pars(127,bt)
	919	buildings(nb)%theta_int_h_set = building_pars(118,bt)
	920	buildings(nb)%theta_int_c_set = building_pars(117,bt)
	921	buildings(nb)%phi_h_max = building_pars(128,bt)
	922	buildings(nb)%phi_c_max = building_pars(129,bt)
	923	buildings(nb)%qint_high = building_pars(130,bt)
	924	buildings(nb)%qint_low = building_pars(131,bt)
	925	buildings(nb)%height_storey = building_pars(132,bt)
	926	buildings(nb)%height_cei_con = building_pars(133,bt)
	927	!
	928	!-- Initialize ventilaation load. Please note, building types > 7
	929	!-- are actually not allowed (check already in urban_surface_mod
	930	!-- and netcdf_data_input_mod. However, the building data base may
	931	!-- be later extended.
	932	IF ( bt == 1 .OR. bt == 2 .OR. &
	933	bt == 3 .OR. bt == 10 .OR. &
	934	bt == 11 .OR. bt == 12 ) THEN
	935	buildings(nb)%ventilation_int_loads = 1
	936	!
	937	!-- Office, building with large windows
	938	ELSEIF ( bt == 4 .OR. bt == 5 .OR. &
	939	bt == 6 .OR. bt == 7 .OR. &
	940	bt == 8 .OR. bt == 9) THEN
	941	buildings(nb)%ventilation_int_loads = 2
	942	!
	943	!-- Industry, hospitals
	944	ELSEIF ( bt == 13 .OR. bt == 14 .OR. &
	945	bt == 15 .OR. bt == 16 .OR. &
	946	bt == 17 .OR. bt == 18 ) THEN
	947	buildings(nb)%ventilation_int_loads = 3
	948	ENDIF
	949	ENDIF
	950	ENDDO
	951	ENDDO
	952	ENDIF
	953	!
	954	!-- Initial room temperature [K]
	955	!-- (after first loop, use theta_m_t as theta_m_t_prev)
	956	theta_m_t_prev = initial_indoor_temperature
	957	!
	958	!-- Initialize indoor temperature. Actually only for output at initial state.
	959	DO nb = 1, num_build
	960	buildings(nb)%t_in(:) = initial_indoor_temperature
	961	ENDDO
	962
	963	CALL location_message( 'finished', .TRUE. )
	964
	965	END SUBROUTINE im_init
	966
	967
	968	!------------------------------------------------------------------------------!
	969	! Description:
	970	! ------------
	971	!> Main part of the indoor model.
	972	!> Calculation of .... (kanani: Please describe)
	973	!------------------------------------------------------------------------------!
	974	SUBROUTINE im_main_heatcool
	975
	976	USE arrays_3d, &
	977	ONLY: ddzw, dzw
	978
	979	USE date_and_time_mod, &
	980	ONLY: time_utc
	981
	982	USE grid_variables, &
	983	ONLY: dx, dy
	984
	985	USE pegrid
	986
	987	USE surface_mod, &
	988	ONLY: ind_veg_wall, ind_wat_win, surf_usm_h, surf_usm_v
	989
	990	USE urban_surface_mod, &
	991	ONLY: nzt_wall, t_wall_h, t_wall_v, t_window_h, t_window_v, &
	992	building_type
	993
	994
	995	IMPLICIT NONE
	996
	997	INTEGER(iwp) :: i !< index of facade-adjacent atmosphere grid point in x-direction
	998	INTEGER(iwp) :: j !< index of facade-adjacent atmosphere grid point in y-direction
	999	INTEGER(iwp) :: k !< index of facade-adjacent atmosphere grid point in z-direction
	1000	INTEGER(iwp) :: kk !< vertical index of indoor grid point adjacent to facade
	1001	INTEGER(iwp) :: l !< running index for surface-element orientation
	1002	INTEGER(iwp) :: m !< running index surface elements
	1003	INTEGER(iwp) :: nb !< running index for buildings
	1004	INTEGER(iwp) :: fa !< running index for facade elements of each building
	1005
	1006	REAL(wp) :: indoor_wall_window_temperature !< weighted temperature of innermost wall/window layer
	1007	REAL(wp) :: near_facade_temperature !< outside air temperature 10cm away from facade
	1008	REAL(wp) :: time_utc_hour !< time of day (hour UTC)
	1009
	1010	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_l_send !< dummy send buffer used for summing-up indoor temperature per kk-level
	1011	REAL(wp), DIMENSION(:), ALLOCATABLE :: t_in_recv !< dummy recv buffer used for summing-up indoor temperature per kk-level
	1012	!
	1013	!-- Determine time of day in hours.
	1014	time_utc_hour = time_utc / 3600.0_wp
	1015	!
	1016	!-- Following calculations must be done for each facade element.
	1017	DO nb = 1, num_build
	1018	!
	1019	!-- First, check whether building is present on local subdomain.
	1020	IF ( buildings(nb)%on_pe ) THEN
	1021	!
	1022	!-- Determine daily schedule. 08:00-18:00 = 1, other hours = 0.
	1023	!-- Residental Building, panel WBS 70
	1024	IF ( buildings(nb)%ventilation_int_loads == 1 ) THEN
	1025	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 8.0_wp ) THEN
	1026	schedule_d = 1
	1027	ELSEIF ( time_utc_hour >= 18.0_wp .AND. time_utc_hour <= 23.0_wp ) THEN
	1028	schedule_d = 1
	1029	ELSE
	1030	schedule_d = 0
	1031	ENDIF
	1032	ENDIF
	1033	!
	1034	!-- Office, building with large windows
	1035	IF ( buildings(nb)%ventilation_int_loads == 2 ) THEN
	1036	IF ( time_utc_hour >= 8.0_wp .AND. time_utc_hour <= 18.0_wp ) THEN
	1037	schedule_d = 1
	1038	ELSE
	1039	schedule_d = 0
	1040	ENDIF
	1041	ENDIF
	1042	!
	1043	!-- Industry, hospitals
	1044	IF ( buildings(nb)%ventilation_int_loads == 3 ) THEN
	1045	IF ( time_utc_hour >= 6.0_wp .AND. time_utc_hour <= 22.0_wp ) THEN
	1046	schedule_d = 1
	1047	ELSE
	1048	schedule_d = 0
	1049	ENDIF
	1050	ENDIF
	1051	!
	1052	!-- Initialize/reset indoor temperature
	1053	buildings(nb)%t_in_l = 0.0_wp
	1054	!
	1055	!-- Horizontal surfaces
	1056	DO fa = 1, buildings(nb)%num_facades_per_building_h_l
	1057	!
	1058	!-- Determine index where corresponding surface-type information
	1059	!-- is stored.
	1060	m = buildings(nb)%m_h(fa)
	1061	!
	1062	!-- Determine building height level index.
	1063	kk = surf_usm_h%k(m) + surf_usm_h%koff
	1064	!
	1065	!-- Building geometries --> not time-dependent
	1066	facade_element_area = dx * dy !< [m2] surface area per facade element
	1067	floor_area_per_facade = buildings(nb)%vpf(kk) * ddzw(kk) !< [m2] net floor area per facade element
	1068	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3] indoor air volume per facade element
	1069	window_area_per_facade = surf_usm_h%frac(ind_wat_win,m) * facade_element_area !< [m2] window area per facade element
	1070
	1071	! print*, "building_height", building_height
	1072	! print*, "num_facades_v_l", buildings(nb)%num_facades_per_building_v_l
	1073	! print*, "num_facades_v", buildings(nb)%num_facades_per_building_v
	1074	! print*, "kb_min_max", buildings(nb)%kb_min, buildings(nb)%kb_max
	1075	! print*, "dzw kk", dzw(kk), kk
	1076
[3759]	1077	f_cei = buildings(nb)%building_height / &
	1078	(buildings(nb)%height_storey-buildings(nb)%height_cei_con) !< [-] factor for ceiling redcution
[3744]	1079	ngs = buildings(nb)%vpf(kk)/f_cei !< [m2] calculation of netto ground surface
	1080	f_sr = ngs/floor_area_per_facade !< [-] factor for surface reduction
	1081	eff_mass_area = buildings(nb)%factor_a * ngs !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1082	c_m = buildings(nb)%factor_c * ngs !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
	1083	total_area = buildings(nb)%lambda_at * floor_area_per_facade !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
	1084
	1085	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1086	h_tr_w = window_area_per_facade * buildings(nb)%u_value_win !< [W/K] only for windows
	1087	h_tr_is = total_area * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
	1088	h_tr_ms = eff_mass_area * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
	1089	h_tr_op = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) &
	1090	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp ) + 1.0_wp / h_tr_ms )
	1091	h_tr_em = 1.0_wp / ( 1.0_wp / h_tr_op - 1.0_wp / h_tr_ms ) !< [W/K] Eq. (63), Section 12.2.2
	1092	!
	1093	!-- internal air loads dependent on the occupacy of the room
	1094	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
	1095	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1096	* ngs ) !< [W] Eq. (C.1)
	1097	!
	1098	!-- Airflow dependent on the occupacy of the room
	1099	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1100	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low ) !< [1/h]?
	1101	!
	1102	!-- Heat transfer of ventilation
	1103	!-- not less than 0.01 W/K to provide division by 0 in further calculations
	1104	!-- with heat capacity of air 0.33 Wh/m2K
	1105	h_ve = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1106	0.33_wp * (1.0_wp - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
	1107
	1108	!-- Heat transfer coefficient auxiliary variables
	1109	h_tr_1 = 1.0_wp / ( ( 1.0_wp / h_ve ) + ( 1.0_wp / h_tr_is ) ) !< [W/K] Eq. (C.6)
	1110	h_tr_2 = h_tr_1 + h_tr_w !< [W/K] Eq. (C.7)
	1111	h_tr_3 = 1.0_wp / ( ( 1.0_wp / h_tr_2 ) + ( 1.0_wp / h_tr_ms ) ) !< [W/K] Eq. (C.8)
	1112	!
	1113	!-- Net short-wave radiation through window area (was i_global)
	1114	net_sw_in = surf_usm_h%rad_sw_in(m) - surf_usm_h%rad_sw_out(m)
	1115	!
	1116	!-- Quantities needed for im_calc_temperatures
	1117	i = surf_usm_h%i(m)
	1118	j = surf_usm_h%j(m)
	1119	k = surf_usm_h%k(m)
	1120	near_facade_temperature = surf_usm_h%pt_10cm(m)
	1121	indoor_wall_window_temperature = &
	1122	surf_usm_h%frac(ind_veg_wall,m) * t_wall_h(nzt_wall,m) &
	1123	+ surf_usm_h%frac(ind_wat_win,m) * t_window_h(nzt_wall,m)
	1124	!
	1125	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1126	!-- threshold parameter (params_solar_protection), sun protection will
	1127	!-- be activated
	1128	IF ( net_sw_in <= params_solar_protection ) THEN
	1129	solar_protection_off = 1
	1130	solar_protection_on = 0
	1131	ELSE
	1132	solar_protection_off = 0
	1133	solar_protection_on = 1
	1134	ENDIF
	1135	!
	1136	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
	1137	!-- DIN 4108 - 2 chap.8
	1138	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1139	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * solar_protection_on ) &
	1140	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w !< [W]
	1141	!
	1142	!-- Calculation of the mass specific thermal load for internal and external heatsources of the inner node
	1143	phi_m = (eff_mass_area / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1144	!
	1145	!-- Calculation mass specific thermal load implied non thermal mass
	1146	phi_st = ( 1.0_wp - ( eff_mass_area / total_area ) - ( h_tr_w / ( 9.1_wp * total_area ) ) ) &
	1147	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
	1148	!
	1149	!-- Calculations for deriving indoor temperature and heat flux into the wall
	1150	!-- Step 1: Indoor temperature without heating and cooling
	1151	!-- section C.4.1 Picture C.2 zone 3)
	1152	phi_hc_nd = 0.0_wp
	1153
	1154	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1155	near_facade_temperature, phi_hc_nd )
	1156	!
	1157	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
	1158	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. theta_air <= buildings(nb)%theta_int_c_set ) THEN
	1159	phi_hc_nd_ac = 0.0_wp
	1160	phi_hc_nd = phi_hc_nd_ac
	1161	theta_air_ac = theta_air
	1162	!
	1163	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1164	!-- again.
	1165	ELSE
	1166	!
	1167	!-- Temperature not correct, calculation method according to section C4.2
	1168	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1169
	1170	!-- Heating or cooling?
	1171	IF ( theta_air > buildings(nb)%theta_int_c_set ) THEN
	1172	theta_air_set = buildings(nb)%theta_int_c_set
	1173	ELSE
	1174	theta_air_set = buildings(nb)%theta_int_h_set
	1175	ENDIF
	1176
	1177	!-- Calculate the temperature with phi_hc_nd_10
	1178	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1179	phi_hc_nd = phi_hc_nd_10
	1180
	1181	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1182	near_facade_temperature, phi_hc_nd )
	1183
	1184	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1185	!
	1186
	1187	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
	1188	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
	1189
	1190	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
	1191	!-- If necessary, limit the power to maximum power
	1192	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1193	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
	1194	phi_hc_nd_ac = phi_hc_nd_un
	1195	phi_hc_nd = phi_hc_nd_un
	1196	ELSE
	1197	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
	1198	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1199	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1200	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
	1201	ELSE
	1202	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1203	ENDIF
	1204	ENDIF
	1205
	1206	phi_hc_nd = phi_hc_nd_ac
	1207	!
	1208	!-- Calculate the temperature with phi_hc_nd_ac (new)
	1209	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1210	near_facade_temperature, phi_hc_nd )
	1211
	1212	theta_air_ac = theta_air
	1213
	1214	ENDIF
	1215	!
	1216	!-- Update theta_m_t_prev
	1217	theta_m_t_prev = theta_m_t
	1218	!
	1219	!-- Calculate the operating temperature with weighted mean temperature of air and mean solar temperature
	1220	!-- Will be used for thermal comfort calculations
	1221	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s !< [degree_C] operative Temperature Eq. (C.12)
	1222	!
	1223	!-- Heat flux into the wall. Value needed in urban_surface_mod to
	1224	!-- calculate heat transfer through wall layers towards the facade
	1225	!-- (use c_p * rho_surface to convert [W/m2] into [K m/s])
	1226	q_wall_win = h_tr_ms * ( theta_s - theta_m ) &
	1227	/ ( facade_element_area &
	1228	- window_area_per_facade )
	1229	!
	1230	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
	1231	surf_usm_h%iwghf_eb(m) = q_wall_win
	1232	surf_usm_h%iwghf_eb_window(m) = q_wall_win
	1233	!
	1234	!-- Sum up operational indoor temperature per kk-level. Further below,
	1235	!-- this temperature is reduced by MPI to one temperature per kk-level
	1236	!-- and building (processor overlapping)
	1237	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1238	!
	1239	!-- Calculation of waste heat
	1240	!-- Anthropogenic heat output
	1241	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
	1242	heating_on = 1
	1243	cooling_on = 0
	1244	ELSE
	1245	heating_on = 0
	1246	cooling_on = 1
	1247	ENDIF
	1248
	1249	q_waste_heat = (phi_hc_nd * (params_waste_heat_h * heating_on + params_waste_heat_c * cooling_on))!< [W/GebÃ€udemodell] , observe the directional convention in PALM!
	1250	surf_usm_h%waste_heat(m) = q_waste_heat
	1251
	1252	ENDDO !< Horizontal surfaces loop
	1253	!
	1254	!-- Vertical surfaces
	1255	DO fa = 1, buildings(nb)%num_facades_per_building_v_l
	1256	!
	1257	!-- Determine indices where corresponding surface-type information
	1258	!-- is stored.
	1259	l = buildings(nb)%l_v(fa)
	1260	m = buildings(nb)%m_v(fa)
	1261	!
	1262	!-- Determine building height level index.
	1263	kk = surf_usm_v(l)%k(m) + surf_usm_v(l)%koff
	1264	!
	1265	!-- (SOME OF THE FOLLOWING (not time-dependent COULD PROBABLY GO INTO A FUNCTION
	1266	!-- EXCEPT facade_element_area, EVERYTHING IS CALCULATED EQUALLY)
	1267	!-- Building geometries --> not time-dependent
	1268	IF ( l == 0 .OR. l == 1 ) facade_element_area = dx * dzw(kk) !< [m2] surface area per facade element
	1269	IF ( l == 2 .OR. l == 3 ) facade_element_area = dy * dzw(kk) !< [m2] surface area per facade element
	1270	floor_area_per_facade = buildings(nb)%vpf(kk) * ddzw(kk) !< [m2] net floor area per facade element
	1271	indoor_volume_per_facade = buildings(nb)%vpf(kk) !< [m3] indoor air volume per facade element
	1272	window_area_per_facade = surf_usm_v(l)%frac(ind_wat_win,m) * facade_element_area !< [m2] window area per facade element
[3759]	1273
	1274	f_cei = buildings(nb)%building_height / &
	1275	(buildings(nb)%height_storey-buildings(nb)%height_cei_con) !< [-] factor for ceiling redcution
[3744]	1276	ngs = buildings(nb)%vpf(kk)/f_cei !< [m2] calculation of netto ground surface
	1277	f_sr = ngs/floor_area_per_facade !< [-] factor for surface reduction
	1278	eff_mass_area = buildings(nb)%factor_a * ngs !< [m2] standard values according to Table 12 section 12.3.1.2 (calculate over Eq. (65) according to section 12.3.1.2)
	1279	c_m = buildings(nb)%factor_c * ngs !< [J/K] standard values according to table 12 section 12.3.1.2 (calculate over Eq. (66) according to section 12.3.1.2)
	1280	total_area = buildings(nb)%lambda_at * floor_area_per_facade !< [m2] area of all surfaces pointing to zone Eq. (9) according to section 7.2.2.2
	1281	!
	1282	!-- Calculation of heat transfer coefficient for transmission --> not time-dependent
	1283	h_tr_w = window_area_per_facade * buildings(nb)%u_value_win !< [W/K] only for windows
	1284	h_tr_is = total_area * h_is !< [W/K] with h_is = 3.45 W / (m2 K) between surface and air, Eq. (9)
	1285	h_tr_ms = eff_mass_area * h_ms !< [W/K] with h_ms = 9.10 W / (m2 K) between component and surface, Eq. (64)
	1286	h_tr_op = 1.0_wp / ( 1.0_wp / ( ( facade_element_area - window_area_per_facade ) &
	1287	* buildings(nb)%lambda_layer3 / buildings(nb)%s_layer3 * 0.5_wp ) + 1.0_wp / h_tr_ms )
	1288	h_tr_em = 1.0_wp / ( 1.0_wp / h_tr_op - 1.0_wp / h_tr_ms ) !< [W/K] Eq. (63), Section 12.2.2
	1289	!
	1290	!-- internal air loads dependent on the occupacy of the room
	1291	!-- basical internal heat gains (qint_low) with additional internal heat gains by occupancy (qint_high) (0,5*phi_int)
	1292	phi_ia = 0.5_wp * ( ( buildings(nb)%qint_high * schedule_d + buildings(nb)%qint_low ) &
	1293	* ngs ) !< [W] Eq. (C.1)
	1294	!
	1295	!-- Airflow dependent on the occupacy of the room
	1296	!-- basical airflow (air_change_low) with additional airflow gains by occupancy (air_change_high)
	1297	air_change = ( buildings(nb)%air_change_high * schedule_d + buildings(nb)%air_change_low )
	1298	!
	1299	!-- Heat transfer of ventilation
	1300	!-- not less than 0.01 W/K to provide division by 0 in further calculations
	1301	!-- with heat capacity of air 0.33 Wh/m2K
	1302	h_ve = MAX( 0.01_wp , ( air_change * indoor_volume_per_facade * &
	1303	0.33_wp * (1 - buildings(nb)%eta_ve ) ) ) !< [W/K] from ISO 13789 Eq.(10)
	1304
	1305	!-- Heat transfer coefficient auxiliary variables
	1306	h_tr_1 = 1.0_wp / ( ( 1.0_wp / h_ve ) + ( 1.0_wp / h_tr_is ) ) !< [W/K] Eq. (C.6)
	1307	h_tr_2 = h_tr_1 + h_tr_w !< [W/K] Eq. (C.7)
	1308	h_tr_3 = 1.0_wp / ( ( 1.0_wp / h_tr_2 ) + ( 1.0_wp / h_tr_ms ) ) !< [W/K] Eq. (C.8)
	1309	!
	1310	!-- Net short-wave radiation through window area (was i_global)
	1311	net_sw_in = surf_usm_v(l)%rad_sw_in(m) - surf_usm_v(l)%rad_sw_out(m)
	1312	!
	1313	!-- Quantities needed for im_calc_temperatures
	1314	i = surf_usm_v(l)%i(m)
	1315	j = surf_usm_v(l)%j(m)
	1316	k = surf_usm_v(l)%k(m)
	1317	near_facade_temperature = surf_usm_v(l)%pt_10cm(m)
	1318	indoor_wall_window_temperature = &
	1319	surf_usm_v(l)%frac(ind_veg_wall,m) * t_wall_v(l)%t(nzt_wall,m) &
	1320	+ surf_usm_v(l)%frac(ind_wat_win,m) * t_window_v(l)%t(nzt_wall,m)
	1321	!
	1322	!-- Solar thermal gains. If net_sw_in larger than sun-protection
	1323	!-- threshold parameter (params_solar_protection), sun protection will
	1324	!-- be activated
	1325	IF ( net_sw_in <= params_solar_protection ) THEN
	1326	solar_protection_off = 1
	1327	solar_protection_on = 0
	1328	ELSE
	1329	solar_protection_off = 0
	1330	solar_protection_on = 1
	1331	ENDIF
	1332	!
	1333	!-- Calculation of total heat gains from net_sw_in through windows [W] in respect on automatic sun protection
	1334	!-- DIN 4108 - 2 chap.8
	1335	phi_sol = ( window_area_per_facade * net_sw_in * solar_protection_off &
	1336	+ window_area_per_facade * net_sw_in * buildings(nb)%f_c_win * solar_protection_on ) &
	1337	* buildings(nb)%g_value_win * ( 1.0_wp - params_f_f ) * params_f_w
	1338	!
	1339	!-- Calculation of the mass specific thermal load for internal and external heatsources
	1340	phi_m = (eff_mass_area / total_area) * ( phi_ia + phi_sol ) !< [W] Eq. (C.2) with phi_ia=0,5*phi_int
	1341	!
	1342	!-- Calculation mass specific thermal load implied non thermal mass
	1343	phi_st = ( 1.0_wp - ( eff_mass_area / total_area ) - ( h_tr_w / ( 9.1_wp * total_area ) ) ) &
	1344	* ( phi_ia + phi_sol ) !< [W] Eq. (C.3) with phi_ia=0,5*phi_int
	1345	!
	1346	!-- Calculations for deriving indoor temperature and heat flux into the wall
	1347	!-- Step 1: Indoor temperature without heating and cooling
	1348	!-- section C.4.1 Picture C.2 zone 3)
	1349	phi_hc_nd = 0.0_wp
	1350	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1351	near_facade_temperature, phi_hc_nd )
	1352	!
	1353	!-- If air temperature between border temperatures of heating and cooling, assign output variable, then ready
	1354	IF ( buildings(nb)%theta_int_h_set <= theta_air .AND. theta_air <= buildings(nb)%theta_int_c_set ) THEN
	1355	phi_hc_nd_ac = 0.0_wp
	1356	phi_hc_nd = phi_hc_nd_ac
	1357	theta_air_ac = theta_air
	1358	!
	1359	!-- Step 2: Else, apply 10 W/m2 heating/cooling power and calculate indoor temperature
	1360	!-- again.
	1361	ELSE
	1362	!
	1363	!-- Temperature not correct, calculation method according to section C4.2
	1364	theta_air_0 = theta_air !< Note temperature without heating/cooling
	1365
	1366	!-- Heating or cooling?
	1367	IF ( theta_air > buildings(nb)%theta_int_c_set ) THEN
	1368	theta_air_set = buildings(nb)%theta_int_c_set
	1369	ELSE
	1370	theta_air_set = buildings(nb)%theta_int_h_set
	1371	ENDIF
	1372
	1373	!-- Calculate the temperature with phi_hc_nd_10
	1374	phi_hc_nd_10 = 10.0_wp * floor_area_per_facade
	1375	phi_hc_nd = phi_hc_nd_10
	1376
	1377	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1378	near_facade_temperature, phi_hc_nd )
	1379
	1380	theta_air_10 = theta_air !< Note the temperature with 10 W/m2 of heating
	1381
	1382
	1383	phi_hc_nd_un = phi_hc_nd_10 * (theta_air_set - theta_air_0) &
	1384	/ (theta_air_10 - theta_air_0) !< Eq. (C.13)
	1385	!
	1386	!-- Step 3: With temperature ratio to determine the heating or cooling capacity
	1387	!-- If necessary, limit the power to maximum power
	1388	!-- section C.4.1 Picture C.2 zone 2) and 4)
	1389	IF ( buildings(nb)%phi_c_max < phi_hc_nd_un .AND. phi_hc_nd_un < buildings(nb)%phi_h_max ) THEN
	1390	phi_hc_nd_ac = phi_hc_nd_un
	1391	phi_hc_nd = phi_hc_nd_un
	1392	ELSE
	1393	!-- Step 4: Inner temperature with maximum heating (phi_hc_nd_un positive) or cooling (phi_hc_nd_un negative)
	1394	!-- section C.4.1 Picture C.2 zone 1) and 5)
	1395	IF ( phi_hc_nd_un > 0.0_wp ) THEN
	1396	phi_hc_nd_ac = buildings(nb)%phi_h_max !< Limit heating
	1397	ELSE
	1398	phi_hc_nd_ac = buildings(nb)%phi_c_max !< Limit cooling
	1399	ENDIF
	1400	ENDIF
	1401
	1402	phi_hc_nd = phi_hc_nd_ac
	1403	!
	1404	!-- Calculate the temperature with phi_hc_nd_ac (new)
	1405	CALL im_calc_temperatures ( i, j, k, indoor_wall_window_temperature, &
	1406	near_facade_temperature, phi_hc_nd )
	1407
	1408	theta_air_ac = theta_air
	1409
	1410	ENDIF
	1411	!
	1412	!-- Update theta_m_t_prev
	1413	theta_m_t_prev = theta_m_t
	1414	!
	1415	!-- Calculate the operating temperature with weighted mean of temperature of air and mean
	1416	!-- Will be used for thermal comfort calculations
	1417	theta_op = 0.3_wp * theta_air_ac + 0.7_wp * theta_s
	1418	!
	1419	!-- Heat flux into the wall. Value needed in urban_surface_mod to
	1420	!-- calculate heat transfer through wall layers towards the facade
	1421	q_wall_win = h_tr_ms * ( theta_s - theta_m ) &
	1422	/ ( facade_element_area &
	1423	- window_area_per_facade )
	1424	!
	1425	!-- Transfer q_wall_win back to USM (innermost wall/window layer)
	1426	surf_usm_v(l)%iwghf_eb(m) = q_wall_win
	1427	surf_usm_v(l)%iwghf_eb_window(m) = q_wall_win
	1428	!
	1429	!-- Sum up operational indoor temperature per kk-level. Further below,
	1430	!-- this temperature is reduced by MPI to one temperature per kk-level
	1431	!-- and building (processor overlapping)
	1432	buildings(nb)%t_in_l(kk) = buildings(nb)%t_in_l(kk) + theta_op
	1433
	1434	!
	1435	!-- Calculation of waste heat
	1436	!-- Anthropogenic heat output
	1437	IF ( phi_hc_nd_ac > 0.0_wp ) THEN
	1438	heating_on = 1
	1439	cooling_on = 0
	1440	ELSE
	1441	heating_on = 0
	1442	cooling_on = 1
	1443	ENDIF
	1444
	1445	q_waste_heat = (phi_hc_nd * (params_waste_heat_h * heating_on + params_waste_heat_c * cooling_on))!< [W/GebÃ€udemodell] , observe the directional convention in PALM!
	1446	surf_usm_v(l)%waste_heat(m) = q_waste_heat
	1447
	1448	ENDDO !< Vertical surfaces loop
	1449
	1450	ENDIF !< buildings(nb)%on_pe
	1451	ENDDO !< buildings loop
	1452
	1453	!
	1454	!-- Determine the mean building temperature.
	1455	DO nb = 1, num_build
	1456	!
	1457	!-- Allocate dummy array used for summing-up facade elements.
	1458	!-- Please note, dummy arguments are necessary as building-date type
	1459	!-- arrays are not necessarily allocated on all PEs.
	1460	ALLOCATE( t_in_l_send(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1461	ALLOCATE( t_in_recv(buildings(nb)%kb_min:buildings(nb)%kb_max) )
	1462	t_in_l_send = 0.0_wp
	1463	t_in_recv = 0.0_wp
	1464
	1465	IF ( buildings(nb)%on_pe ) THEN
	1466	t_in_l_send = buildings(nb)%t_in_l
	1467	ENDIF
	1468
	1469	#if defined( __parallel )
	1470	CALL MPI_ALLREDUCE( t_in_l_send, &
	1471	t_in_recv, &
	1472	buildings(nb)%kb_max - buildings(nb)%kb_min + 1, &
	1473	MPI_REAL, &
	1474	MPI_SUM, &
	1475	comm2d, &
	1476	ierr )
	1477
	1478	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
	1479	buildings(nb)%t_in = t_in_recv
	1480	#else
[3759]	1481	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
	1482	buildings(nb)%t_in = buildings(nb)%t_in_l
[3744]	1483	#endif
[3759]	1484	IF ( ALLOCATED( buildings(nb)%t_in ) ) &
	1485	buildings(nb)%t_in = buildings(nb)%t_in / &
	1486	( buildings(nb)%num_facade_h + &
	1487	buildings(nb)%num_facade_v )
[3744]	1488	!
	1489	!-- Deallocate dummy arrays
	1490	DEALLOCATE( t_in_l_send )
	1491	DEALLOCATE( t_in_recv )
	1492
	1493	ENDDO
	1494
	1495
	1496	END SUBROUTINE im_main_heatcool
	1497
	1498	!-----------------------------------------------------------------------------!
	1499	! Description:
	1500	!-------------
	1501	!> Check data output for plant canopy model
	1502	!-----------------------------------------------------------------------------!
	1503	SUBROUTINE im_check_data_output( var, unit )
	1504
	1505	IMPLICIT NONE
	1506
	1507	CHARACTER (LEN=*) :: unit !<
	1508	CHARACTER (LEN=*) :: var !<
	1509
	1510	SELECT CASE ( TRIM( var ) )
	1511
	1512
	1513	CASE ( 'im_hf_roof')
	1514	unit = 'W m-2'
	1515
	1516	CASE ( 'im_hf_wall_win' )
	1517	unit = 'W m-2'
	1518
	1519	CASE ( 'im_hf_wall_win_waste' )
	1520	unit = 'W m-2'
	1521
	1522	CASE ( 'im_hf_roof_waste' )
	1523	unit = 'W m-2'
	1524
	1525	CASE ( 'im_t_indoor' )
	1526	unit = 'K'
	1527
	1528	CASE DEFAULT
	1529	unit = 'illegal'
	1530
	1531	END SELECT
	1532
	1533	END SUBROUTINE
	1534
	1535
	1536	!-----------------------------------------------------------------------------!
	1537	! Description:
	1538	!-------------
	1539	!> Check parameters routine for plant canopy model
	1540	!-----------------------------------------------------------------------------!
	1541	SUBROUTINE im_check_parameters
	1542
	1543	!!!! USE control_parameters,
	1544	!!!! ONLY: message_string
	1545
	1546	IMPLICIT NONE
	1547
	1548	END SUBROUTINE im_check_parameters
	1549
	1550	!-----------------------------------------------------------------------------!
	1551	! Description:
	1552	!-------------
	1553	!> Subroutine defining appropriate grid for netcdf variables.
	1554	!> It is called from subroutine netcdf.
	1555	!-----------------------------------------------------------------------------!
	1556	SUBROUTINE im_define_netcdf_grid( var, found, grid_x, grid_y, grid_z )
	1557
	1558	IMPLICIT NONE
	1559
	1560	CHARACTER (LEN=*), INTENT(IN) :: var
	1561	LOGICAL, INTENT(OUT) :: found
	1562	CHARACTER (LEN=*), INTENT(OUT) :: grid_x
	1563	CHARACTER (LEN=*), INTENT(OUT) :: grid_y
	1564	CHARACTER (LEN=*), INTENT(OUT) :: grid_z
	1565
	1566	found = .TRUE.
	1567
	1568	!
	1569	!-- Check for the grid
	1570	SELECT CASE ( TRIM( var ) )
	1571
	1572	CASE ( 'im_hf_roof', 'im_hf_roof_waste' )
	1573	grid_x = 'x'
	1574	grid_y = 'y'
	1575	grid_z = 'zw'
	1576	!
	1577	!-- Heat fluxes at vertical walls are actually defined on stagged grid, i.e. xu, yv.
	1578	CASE ( 'im_hf_wall_win', 'im_hf_wall_win_waste' )
	1579	grid_x = 'x'
	1580	grid_y = 'y'
	1581	grid_z = 'zu'
	1582
	1583	CASE ( 'im_t_indoor' )
	1584	grid_x = 'x'
	1585	grid_y = 'y'
	1586	grid_z = 'zw'
	1587
	1588	CASE DEFAULT
	1589	found = .FALSE.
	1590	grid_x = 'none'
	1591	grid_y = 'none'
	1592	grid_z = 'none'
	1593	END SELECT
	1594
	1595	END SUBROUTINE im_define_netcdf_grid
	1596
	1597	!------------------------------------------------------------------------------!
	1598	! Description:
	1599	! ------------
	1600	!> Subroutine defining 3D output variables
	1601	!------------------------------------------------------------------------------!
	1602	SUBROUTINE im_data_output_3d( av, variable, found, local_pf, fill_value, &
	1603	nzb_do, nzt_do )
	1604
	1605	USE indices
	1606
	1607	USE kinds
	1608
	1609	IMPLICIT NONE
	1610
	1611	CHARACTER (LEN=*) :: variable !<
	1612
	1613	INTEGER(iwp) :: av !<
	1614	INTEGER(iwp) :: i !<
	1615	INTEGER(iwp) :: j !<
	1616	INTEGER(iwp) :: k !<
	1617	INTEGER(iwp) :: l !<
	1618	INTEGER(iwp) :: m !<
	1619	INTEGER(iwp) :: nb !< index of the building in the building data structure
	1620	INTEGER(iwp) :: nzb_do !< lower limit of the data output (usually 0)
	1621	INTEGER(iwp) :: nzt_do !< vertical upper limit of the data output (usually nz_do3d)
	1622
	1623
	1624	LOGICAL :: found !<
	1625
	1626	REAL(wp), INTENT(IN) :: fill_value !< value for the _FillValue attribute
	1627
	1628	REAL(sp), DIMENSION(nxl:nxr,nys:nyn,nzb_do:nzt_do) :: local_pf !<
	1629
	1630	local_pf = fill_value
	1631
	1632	found = .TRUE.
	1633
	1634	SELECT CASE ( TRIM( variable ) )
	1635	!
	1636	!-- Output of indoor temperature. All grid points within the building are
	1637	!-- filled with values, while atmospheric grid points are set to _FillValues.
	1638	CASE ( 'im_t_indoor' )
	1639	IF ( av == 0 ) THEN
	1640	DO i = nxl, nxr
	1641	DO j = nys, nyn
	1642	IF ( building_id_f%var(j,i) /= building_id_f%fill ) THEN
	1643	!
	1644	!-- Determine index of the building within the building data structure.
	1645	nb = MINLOC( ABS( buildings(:)%id - building_id_f%var(j,i) ), &
	1646	DIM = 1 )
[3759]	1647	IF ( buildings(nb)%on_pe ) THEN
[3744]	1648	!
[3759]	1649	!-- Write mean building temperature onto output array. Please note,
	1650	!-- in contrast to many other loops in the output, the vertical
	1651	!-- bounds are determined by the lowest and hightest vertical index
	1652	!-- occupied by the building.
	1653	DO k = buildings(nb)%kb_min, buildings(nb)%kb_max
	1654	local_pf(i,j,k) = buildings(nb)%t_in(k)
	1655	ENDDO
	1656	ENDIF
[3744]	1657	ENDIF
	1658	ENDDO
	1659	ENDDO
	1660	ENDIF
	1661
	1662	CASE ( 'im_hf_roof' )
	1663	IF ( av == 0 ) THEN
	1664	DO m = 1, surf_usm_h%ns
	1665	i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1666	j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1667	k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1668	local_pf(i,j,k) = surf_usm_h%iwghf_eb(m)
	1669	ENDDO
	1670	ENDIF
	1671
	1672	CASE ( 'im_hf_roof_waste' )
	1673	IF ( av == 0 ) THEN
	1674	DO m = 1, surf_usm_h%ns
	1675	i = surf_usm_h%i(m) !+ surf_usm_h%ioff
	1676	j = surf_usm_h%j(m) !+ surf_usm_h%joff
	1677	k = surf_usm_h%k(m) !+ surf_usm_h%koff
	1678	local_pf(i,j,k) = surf_usm_h%waste_heat(m)
	1679	ENDDO
	1680	ENDIF
	1681
	1682	CASE ( 'im_hf_wall_win' )
	1683	IF ( av == 0 ) THEN
	1684	DO l = 0, 3
	1685	DO m = 1, surf_usm_v(l)%ns
	1686	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1687	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1688	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1689	local_pf(i,j,k) = surf_usm_v(l)%iwghf_eb(m)
	1690	ENDDO
	1691	ENDDO
	1692	ENDIF
	1693
	1694	CASE ( 'im_hf_wall_win_waste' )
	1695	IF ( av == 0 ) THEN
	1696	DO l = 0, 3
	1697	DO m = 1, surf_usm_v(l)%ns
	1698	i = surf_usm_v(l)%i(m) !+ surf_usm_v(l)%ioff
	1699	j = surf_usm_v(l)%j(m) !+ surf_usm_v(l)%joff
	1700	k = surf_usm_v(l)%k(m) !+ surf_usm_v(l)%koff
	1701	local_pf(i,j,k) = surf_usm_v(l)%waste_heat(m)
	1702	ENDDO
	1703	ENDDO
	1704	ENDIF
	1705
	1706	CASE DEFAULT
	1707	found = .FALSE.
	1708
	1709	END SELECT
	1710
	1711	END SUBROUTINE im_data_output_3d
	1712	!------------------------------------------------------------------------------!
	1713	! Description:
	1714	! ------------
	1715	!> Parin for &indoor_parameters for indoor model
	1716	!------------------------------------------------------------------------------!
	1717	SUBROUTINE im_parin
	1718
	1719	USE control_parameters, &
	1720	ONLY: indoor_model
	1721
	1722	IMPLICIT NONE
	1723
	1724	CHARACTER (LEN=80) :: line !< string containing current line of file PARIN
	1725
	1726	NAMELIST /indoor_parameters/ dt_indoor, initial_indoor_temperature
	1727
	1728	!
	1729	!-- Try to find indoor model package
	1730	REWIND ( 11 )
	1731	line = ' '
	1732	DO WHILE ( INDEX( line, '&indoor_parameters' ) == 0 )
	1733	READ ( 11, '(A)', END=10 ) line
	1734	ENDDO
	1735	BACKSPACE ( 11 )
	1736
	1737	!
	1738	!-- Read user-defined namelist
	1739	READ ( 11, indoor_parameters )
	1740	!
	1741	!-- Set flag that indicates that the indoor model is switched on
	1742	indoor_model = .TRUE.
	1743
	1744	!
	1745	!-- Activate spinup (maybe later
	1746	! IF ( spinup_time > 0.0_wp ) THEN
	1747	! coupling_start_time = spinup_time
	1748	! end_time = end_time + spinup_time
	1749	! IF ( spinup_pt_mean == 9999999.9_wp ) THEN
	1750	! spinup_pt_mean = pt_surface
	1751	! ENDIF
	1752	! spinup = .TRUE.
	1753	! ENDIF
	1754
	1755	10 CONTINUE
	1756
	1757	END SUBROUTINE im_parin
	1758
	1759
	1760	END MODULE indoor_model_mod

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |