Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 791

Last change on this file since 791 was 768, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.6 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Current revisions:
5	! -----------------
6	!
7	!
8	! Former revisions:
9	! -----------------
10	! $Id: header.f90 768 2011-10-14 06:57:15Z raasch $
11	!
12	! 767 2011-10-14 06:39:12Z raasch
13	! Output of given initial u,v-profiles
14	!
15	! 759 2011-09-15 13:58:31Z raasch
16	! output of maximum number of parallel io streams
17	!
18	! 707 2011-03-29 11:39:40Z raasch
19	! bc_lr/ns replaced by bc_lr/ns_cyc
20	!
21	! 667 2010-12-23 12:06:00Z suehring/gryschka
22	! Output of advection scheme.
23	! Modified output of Prandtl-layer height.
24	!
25	! 580 2010-10-05 13:59:11Z heinze
26	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
27	! ws_vertical_gradient_level to subs_vertical_gradient_level and
28	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
29	!
30	! 493 2010-03-01 08:30:24Z raasch
31	! NetCDF data output format extendend for NetCDF4/HDF5
32	!
33	! 449 2010-02-02 11:23:59Z raasch
34	! +large scale vertical motion (subsidence/ascent)
35	! Bugfix: index problem concerning gradient_level indices removed
36	!
37	! 410 2009-12-04 17:05:40Z letzel
38	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
39	! mask_scale\|_x\|y\|z, masks, skip_time_domask
40	!
41	! 346 2009-07-06 10:13:41Z raasch
42	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
43	! Coupling with independent precursor runs.
44	! Output of messages replaced by message handling routine.
45	! Output of several additional dvr parameters
46	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
47	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
48	! dp_smooth, dpdxy, u_bulk, v_bulk
49	! topography_grid_convention moved from user_header
50	! small bugfix concerning 3d 64bit netcdf output format
51	!
52	! 206 2008-10-13 14:59:11Z raasch
53	! Bugfix: error in zu index in case of section_xy = -1
54	!
55	! 198 2008-09-17 08:55:28Z raasch
56	! Format adjustments allowing output of larger revision numbers
57	!
58	! 197 2008-09-16 15:29:03Z raasch
59	! allow 100 spectra levels instead of 10 for consistency with
60	! define_netcdf_header,
61	! bugfix in the output of the characteristic levels of potential temperature,
62	! geostrophic wind, scalar concentration, humidity and leaf area density,
63	! output of turbulence recycling informations
64	!
65	! 138 2007-11-28 10:03:58Z letzel
66	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
67	! Allow two instead of one digit to specify isosurface and slicer variables.
68	! Output of sorting frequency of particles
69	!
70	! 108 2007-08-24 15:10:38Z letzel
71	! Output of informations for coupled model runs (boundary conditions etc.)
72	! + output of momentumfluxes at the top boundary
73	! Rayleigh damping for ocean, e_init
74	!
75	! 97 2007-06-21 08:23:15Z raasch
76	! Adjustments for the ocean version.
77	! use_pt_reference renamed use_reference
78	!
79	! 87 2007-05-22 15:46:47Z raasch
80	! Bugfix: output of use_upstream_for_tke
81	!
82	! 82 2007-04-16 15:40:52Z raasch
83	! Preprocessor strings for different linux clusters changed to "lc",
84	! routine local_flush is used for buffer flushing
85	!
86	! 76 2007-03-29 00:58:32Z raasch
87	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
88	! output of the loop optimization method, moisture renamed humidity,
89	! output of subversion revision number
90	!
91	! 19 2007-02-23 04:53:48Z raasch
92	! Output of scalar flux applied at top boundary
93	!
94	! RCS Log replace by Id keyword, revision history cleaned up
95	!
96	! Revision 1.63 2006/08/22 13:53:13 raasch
97	! Output of dz_max
98	!
99	! Revision 1.1 1997/08/11 06:17:20 raasch
100	! Initial revision
101	!
102	!
103	! Description:
104	! ------------
105	! Writing a header with all important informations about the actual run.
106	! This subroutine is called three times, two times at the beginning
107	! (writing information on files RUN_CONTROL and HEADER) and one time at the
108	! end of the run, then writing additional information about CPU-usage on file
109	! header.
110	!-----------------------------------------------------------------------------!
111
112	USE arrays_3d
113	USE control_parameters
114	USE cloud_parameters
115	USE cpulog
116	USE dvrp_variables
117	USE grid_variables
118	USE indices
119	USE model_1d
120	USE particle_attributes
121	USE pegrid
122	USE subsidence_mod
123	USE spectrum
124
125	IMPLICIT NONE
126
127	CHARACTER (LEN=1) :: prec
128	CHARACTER (LEN=2) :: do2d_mode
129	CHARACTER (LEN=5) :: section_chr
130	CHARACTER (LEN=9) :: time_to_string
131	CHARACTER (LEN=10) :: coor_chr, host_chr
132	CHARACTER (LEN=16) :: begin_chr
133	CHARACTER (LEN=23) :: ver_rev
134	CHARACTER (LEN=40) :: output_format
135	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
136	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
137	domask_chr, run_classification
138	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
139	temperatures, ugcomponent, vgcomponent
140	CHARACTER (LEN=85) :: roben, runten
141
142	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
143
144	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
145	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
146	REAL :: cpuseconds_per_simulated_second
147
148	!
149	!-- Open the output file. At the end of the simulation, output is directed
150	!-- to unit 19.
151	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
152	.NOT. simulated_time_at_begin /= simulated_time ) THEN
153	io = 15 ! header output on file RUN_CONTROL
154	ELSE
155	io = 19 ! header output on file HEADER
156	ENDIF
157	CALL check_open( io )
158
159	!
160	!-- At the end of the run, output file (HEADER) will be rewritten with
161	!-- new informations
162	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
163
164	!
165	!-- Determine kind of model run
166	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
167	run_classification = '3D - restart run'
168	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
169	run_classification = '3D - run with cyclic fill of 3D - prerun data'
170	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
171	run_classification = '3D - run without 1D - prerun'
172	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
173	run_classification = '3D - run with 1D - prerun'
174	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
175	run_classification = '3D - run initialized by user'
176	ELSE
177	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
178	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
179	ENDIF
180	IF ( ocean ) THEN
181	run_classification = 'ocean - ' // run_classification
182	ELSE
183	run_classification = 'atmosphere - ' // run_classification
184	ENDIF
185
186	!
187	!-- Run-identification, date, time, host
188	host_chr = host(1:10)
189	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
190	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
191	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
192	#if defined( __mpi2 )
193	mpi_type = 2
194	#else
195	mpi_type = 1
196	#endif
197	WRITE ( io, 101 ) mpi_type, coupling_mode
198	ENDIF
199	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
200	ADJUSTR( host_chr )
201	#if defined( __parallel )
202	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
203	char1 = 'calculated'
204	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
205	host(1:2) == 'lc' ) .AND. &
206	npex == -1 .AND. pdims(2) == 1 ) THEN
207	char1 = 'forced'
208	ELSE
209	char1 = 'predefined'
210	ENDIF
211	IF ( threads_per_task == 1 ) THEN
212	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
213	ELSE
214	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
215	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
216	ENDIF
217	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
218	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
219	npex == -1 .AND. pdims(2) == 1 ) &
220	THEN
221	WRITE ( io, 106 )
222	ELSEIF ( pdims(2) == 1 ) THEN
223	WRITE ( io, 107 ) 'x'
224	ELSEIF ( pdims(1) == 1 ) THEN
225	WRITE ( io, 107 ) 'y'
226	ENDIF
227	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
228	IF ( numprocs /= maximum_parallel_io_streams ) THEN
229	WRITE ( io, 108 ) maximum_parallel_io_streams
230	ENDIF
231	#endif
232	WRITE ( io, 99 )
233
234	!
235	!-- Numerical schemes
236	WRITE ( io, 110 )
237	IF ( psolver(1:7) == 'poisfft' ) THEN
238	WRITE ( io, 111 ) TRIM( fft_method )
239	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
240	ELSEIF ( psolver == 'sor' ) THEN
241	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
242	ELSEIF ( psolver == 'multigrid' ) THEN
243	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
244	IF ( mg_cycles == -1 ) THEN
245	WRITE ( io, 140 ) residual_limit
246	ELSE
247	WRITE ( io, 141 ) mg_cycles
248	ENDIF
249	IF ( mg_switch_to_pe0_level == 0 ) THEN
250	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
251	nzt_mg(1)
252	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
253	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
254	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
255	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
256	nzt_mg(mg_switch_to_pe0_level), &
257	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
258	nzt_mg(1)
259	ENDIF
260	ENDIF
261	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
262	THEN
263	WRITE ( io, 142 )
264	ENDIF
265
266	IF ( momentum_advec == 'pw-scheme' ) THEN
267	WRITE ( io, 113 )
268	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
269	WRITE ( io, 503 )
270	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
271	WRITE ( io, 114 )
272	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
273	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
274	overshoot_limit_w /= 0.0 ) THEN
275	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
276	overshoot_limit_w
277	ENDIF
278	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
279	ups_limit_w /= 0.0 ) &
280	THEN
281	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
282	ENDIF
283	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
284	ENDIF
285	IF ( scalar_advec == 'pw-scheme' ) THEN
286	WRITE ( io, 116 )
287	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
288	WRITE ( io, 504 )
289	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
290	WRITE ( io, 117 )
291	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
292	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
293	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
294	ENDIF
295	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
296	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
297	ENDIF
298	ELSE
299	WRITE ( io, 118 )
300	ENDIF
301
302	WRITE ( io, 139 ) TRIM( loop_optimization )
303
304	IF ( galilei_transformation ) THEN
305	IF ( use_ug_for_galilei_tr ) THEN
306	char1 = 'geostrophic wind'
307	ELSE
308	char1 = 'mean wind in model domain'
309	ENDIF
310	IF ( simulated_time_at_begin == simulated_time ) THEN
311	char2 = 'at the start of the run'
312	ELSE
313	char2 = 'at the end of the run'
314	ENDIF
315	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
316	advected_distance_x/1000.0, advected_distance_y/1000.0
317	ENDIF
318	IF ( timestep_scheme == 'leapfrog' ) THEN
319	WRITE ( io, 120 )
320	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
321	WRITE ( io, 121 )
322	ELSE
323	WRITE ( io, 122 ) timestep_scheme
324	ENDIF
325	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
326	IF ( rayleigh_damping_factor /= 0.0 ) THEN
327	IF ( .NOT. ocean ) THEN
328	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
329	rayleigh_damping_factor
330	ELSE
331	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
332	rayleigh_damping_factor
333	ENDIF
334	ENDIF
335	IF ( humidity ) THEN
336	IF ( .NOT. cloud_physics ) THEN
337	WRITE ( io, 129 )
338	ELSE
339	WRITE ( io, 130 )
340	WRITE ( io, 131 )
341	IF ( radiation ) WRITE ( io, 132 )
342	IF ( precipitation ) WRITE ( io, 133 )
343	ENDIF
344	ENDIF
345	IF ( passive_scalar ) WRITE ( io, 134 )
346	IF ( conserve_volume_flow ) THEN
347	WRITE ( io, 150 ) conserve_volume_flow_mode
348	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
349	WRITE ( io, 151 ) u_bulk, v_bulk
350	ENDIF
351	ELSEIF ( dp_external ) THEN
352	IF ( dp_smooth ) THEN
353	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
354	ELSE
355	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
356	ENDIF
357	ENDIF
358	IF ( large_scale_subsidence ) THEN
359	WRITE ( io, 153 )
360	WRITE ( io, 154 )
361	ENDIF
362	WRITE ( io, 99 )
363
364	!
365	!-- Runtime and timestep informations
366	WRITE ( io, 200 )
367	IF ( .NOT. dt_fixed ) THEN
368	WRITE ( io, 201 ) dt_max, cfl_factor
369	ELSE
370	WRITE ( io, 202 ) dt
371	ENDIF
372	WRITE ( io, 203 ) simulated_time_at_begin, end_time
373
374	IF ( time_restart /= 9999999.9 .AND. &
375	simulated_time_at_begin == simulated_time ) THEN
376	IF ( dt_restart == 9999999.9 ) THEN
377	WRITE ( io, 204 ) ' Restart at: ',time_restart
378	ELSE
379	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
380	ENDIF
381	ENDIF
382
383	IF ( simulated_time_at_begin /= simulated_time ) THEN
384	i = MAX ( log_point_s(10)%counts, 1 )
385	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
386	cpuseconds_per_simulated_second = 0.0
387	ELSE
388	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
389	( simulated_time - &
390	simulated_time_at_begin )
391	ENDIF
392	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
393	log_point_s(10)%sum / REAL( i ), &
394	cpuseconds_per_simulated_second
395	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
396	IF ( dt_restart == 9999999.9 ) THEN
397	WRITE ( io, 204 ) ' Next restart at: ',time_restart
398	ELSE
399	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
400	ENDIF
401	ENDIF
402	ENDIF
403
404	!
405	!-- Start time for coupled runs, if independent precursor runs for atmosphere
406	!-- and ocean are used. In this case, coupling_start_time defines the time
407	!-- when the coupling is switched on.
408	IF ( coupling_start_time /= 0.0 ) THEN
409	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
410	char1 = 'Precursor run for a coupled atmosphere-ocean run'
411	ELSE
412	char1 = 'Coupled atmosphere-ocean run following independent ' // &
413	'precursor runs'
414	ENDIF
415	WRITE ( io, 207 ) char1, coupling_start_time
416	ENDIF
417
418	!
419	!-- Computational grid
420	IF ( .NOT. ocean ) THEN
421	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
422	IF ( dz_stretch_level_index < nzt+1 ) THEN
423	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
424	dz_stretch_factor, dz_max
425	ENDIF
426	ELSE
427	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
428	IF ( dz_stretch_level_index > 0 ) THEN
429	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
430	dz_stretch_factor, dz_max
431	ENDIF
432	ENDIF
433	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
434	MIN( nnz+2, nzt+2 )
435	IF ( numprocs > 1 ) THEN
436	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
437	WRITE ( io, 255 )
438	ELSE
439	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
440	ENDIF
441	ENDIF
442	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
443
444	!
445	!-- Topography
446	WRITE ( io, 270 ) topography
447	SELECT CASE ( TRIM( topography ) )
448
449	CASE ( 'flat' )
450	! no actions necessary
451
452	CASE ( 'single_building' )
453	blx = INT( building_length_x / dx )
454	bly = INT( building_length_y / dy )
455	bh = INT( building_height / dz )
456
457	IF ( building_wall_left == 9999999.9 ) THEN
458	building_wall_left = ( nx + 1 - blx ) / 2 * dx
459	ENDIF
460	bxl = INT ( building_wall_left / dx + 0.5 )
461	bxr = bxl + blx
462
463	IF ( building_wall_south == 9999999.9 ) THEN
464	building_wall_south = ( ny + 1 - bly ) / 2 * dy
465	ENDIF
466	bys = INT ( building_wall_south / dy + 0.5 )
467	byn = bys + bly
468
469	WRITE ( io, 271 ) building_length_x, building_length_y, &
470	building_height, bxl, bxr, bys, byn
471
472	CASE ( 'single_street_canyon' )
473	ch = NINT( canyon_height / dz )
474	IF ( canyon_width_x /= 9999999.9 ) THEN
475	!
476	!-- Street canyon in y direction
477	cwx = NINT( canyon_width_x / dx )
478	IF ( canyon_wall_left == 9999999.9 ) THEN
479	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
480	ENDIF
481	cxl = NINT( canyon_wall_left / dx )
482	cxr = cxl + cwx
483	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
484
485	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
486	!
487	!-- Street canyon in x direction
488	cwy = NINT( canyon_width_y / dy )
489	IF ( canyon_wall_south == 9999999.9 ) THEN
490	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
491	ENDIF
492	cys = NINT( canyon_wall_south / dy )
493	cyn = cys + cwy
494	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
495	ENDIF
496
497	END SELECT
498
499	IF ( TRIM( topography ) /= 'flat' ) THEN
500	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
501	IF ( TRIM( topography ) == 'single_building' .OR. &
502	TRIM( topography ) == 'single_street_canyon' ) THEN
503	WRITE ( io, 278 )
504	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
505	WRITE ( io, 279 )
506	ENDIF
507	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
508	WRITE ( io, 278 )
509	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
510	WRITE ( io, 279 )
511	ENDIF
512	ENDIF
513
514	IF ( plant_canopy ) THEN
515
516	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
517	IF ( passive_scalar ) THEN
518	WRITE ( io, 281 ) scalar_exchange_coefficient, &
519	leaf_surface_concentration
520	ENDIF
521
522	!
523	!-- Heat flux at the top of vegetation
524	WRITE ( io, 282 ) cthf
525
526	!
527	!-- Leaf area density profile
528	!-- Building output strings, starting with surface value
529	WRITE ( learde, '(F6.2)' ) lad_surface
530	gradients = '------'
531	slices = ' 0'
532	coordinates = ' 0.0'
533	i = 1
534	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
535
536	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
537	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
538
539	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
540	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
541
542	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
543	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
544
545	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
546	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
547
548	i = i + 1
549	ENDDO
550
551	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
552	TRIM( gradients ), TRIM( slices )
553
554	ENDIF
555
556	!
557	!-- Boundary conditions
558	IF ( ibc_p_b == 0 ) THEN
559	runten = 'p(0) = 0 \|'
560	ELSEIF ( ibc_p_b == 1 ) THEN
561	runten = 'p(0) = p(1) \|'
562	ELSE
563	runten = 'p(0) = p(1) +R\|'
564	ENDIF
565	IF ( ibc_p_t == 0 ) THEN
566	roben = 'p(nzt+1) = 0 \|'
567	ELSE
568	roben = 'p(nzt+1) = p(nzt) \|'
569	ENDIF
570
571	IF ( ibc_uv_b == 0 ) THEN
572	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
573	ELSE
574	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
575	ENDIF
576	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
577	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
578	ELSEIF ( ibc_uv_t == 0 ) THEN
579	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
580	ELSE
581	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
582	ENDIF
583
584	IF ( ibc_pt_b == 0 ) THEN
585	runten = TRIM( runten ) // ' pt(0) = pt_surface'
586	ELSEIF ( ibc_pt_b == 1 ) THEN
587	runten = TRIM( runten ) // ' pt(0) = pt(1)'
588	ELSEIF ( ibc_pt_b == 2 ) THEN
589	runten = TRIM( runten ) // ' pt(0) = from coupled model'
590	ENDIF
591	IF ( ibc_pt_t == 0 ) THEN
592	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
593	ELSEIF( ibc_pt_t == 1 ) THEN
594	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
595	ELSEIF( ibc_pt_t == 2 ) THEN
596	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
597
598	ENDIF
599
600	WRITE ( io, 300 ) runten, roben
601
602	IF ( .NOT. constant_diffusion ) THEN
603	IF ( ibc_e_b == 1 ) THEN
604	runten = 'e(0) = e(1)'
605	ELSE
606	runten = 'e(0) = e(1) = (u/0.1)*2'
607	ENDIF
608	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
609
610	WRITE ( io, 301 ) 'e', runten, roben
611
612	ENDIF
613
614	IF ( ocean ) THEN
615	runten = 'sa(0) = sa(1)'
616	IF ( ibc_sa_t == 0 ) THEN
617	roben = 'sa(nzt+1) = sa_surface'
618	ELSE
619	roben = 'sa(nzt+1) = sa(nzt)'
620	ENDIF
621	WRITE ( io, 301 ) 'sa', runten, roben
622	ENDIF
623
624	IF ( humidity ) THEN
625	IF ( ibc_q_b == 0 ) THEN
626	runten = 'q(0) = q_surface'
627	ELSE
628	runten = 'q(0) = q(1)'
629	ENDIF
630	IF ( ibc_q_t == 0 ) THEN
631	roben = 'q(nzt) = q_top'
632	ELSE
633	roben = 'q(nzt) = q(nzt-1) + dq/dz'
634	ENDIF
635	WRITE ( io, 301 ) 'q', runten, roben
636	ENDIF
637
638	IF ( passive_scalar ) THEN
639	IF ( ibc_q_b == 0 ) THEN
640	runten = 's(0) = s_surface'
641	ELSE
642	runten = 's(0) = s(1)'
643	ENDIF
644	IF ( ibc_q_t == 0 ) THEN
645	roben = 's(nzt) = s_top'
646	ELSE
647	roben = 's(nzt) = s(nzt-1) + ds/dz'
648	ENDIF
649	WRITE ( io, 301 ) 's', runten, roben
650	ENDIF
651
652	IF ( use_surface_fluxes ) THEN
653	WRITE ( io, 303 )
654	IF ( constant_heatflux ) THEN
655	WRITE ( io, 306 ) surface_heatflux
656	IF ( random_heatflux ) WRITE ( io, 307 )
657	ENDIF
658	IF ( humidity .AND. constant_waterflux ) THEN
659	WRITE ( io, 311 ) surface_waterflux
660	ENDIF
661	IF ( passive_scalar .AND. constant_waterflux ) THEN
662	WRITE ( io, 313 ) surface_waterflux
663	ENDIF
664	ENDIF
665
666	IF ( use_top_fluxes ) THEN
667	WRITE ( io, 304 )
668	IF ( coupling_mode == 'uncoupled' ) THEN
669	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
670	IF ( constant_top_heatflux ) THEN
671	WRITE ( io, 306 ) top_heatflux
672	ENDIF
673	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
674	WRITE ( io, 316 )
675	ENDIF
676	IF ( ocean .AND. constant_top_salinityflux ) THEN
677	WRITE ( io, 309 ) top_salinityflux
678	ENDIF
679	IF ( humidity .OR. passive_scalar ) THEN
680	WRITE ( io, 315 )
681	ENDIF
682	ENDIF
683
684	IF ( prandtl_layer ) THEN
685	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
686	rif_min, rif_max
687	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
688	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
689	WRITE ( io, 312 )
690	ENDIF
691	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
692	WRITE ( io, 314 )
693	ENDIF
694	ELSE
695	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
696	WRITE ( io, 310 ) rif_min, rif_max
697	ENDIF
698	ENDIF
699
700	WRITE ( io, 317 ) bc_lr, bc_ns
701	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
702	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
703	IF ( turbulent_inflow ) THEN
704	WRITE ( io, 319 ) recycling_width, recycling_plane, &
705	inflow_damping_height, inflow_damping_width
706	ENDIF
707	ENDIF
708
709	!
710	!-- Listing of 1D-profiles
711	WRITE ( io, 325 ) dt_dopr_listing
712	IF ( averaging_interval_pr /= 0.0 ) THEN
713	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
714	ENDIF
715
716	!
717	!-- DATA output
718	WRITE ( io, 330 )
719	IF ( averaging_interval_pr /= 0.0 ) THEN
720	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
721	ENDIF
722
723	!
724	!-- 1D-profiles
725	dopr_chr = 'Profile:'
726	IF ( dopr_n /= 0 ) THEN
727	WRITE ( io, 331 )
728
729	output_format = ''
730	IF ( netcdf_output ) THEN
731	IF ( netcdf_data_format == 1 ) THEN
732	output_format = 'NetCDF classic'
733	ELSE
734	output_format = 'NetCDF 64bit offset'
735	ENDIF
736	ENDIF
737	IF ( profil_output ) THEN
738	IF ( netcdf_output ) THEN
739	output_format = TRIM( output_format ) // ' and profil'
740	ELSE
741	output_format = 'profil'
742	ENDIF
743	ENDIF
744	WRITE ( io, 344 ) output_format
745
746	DO i = 1, dopr_n
747	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
748	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
749	WRITE ( io, 332 ) dopr_chr
750	dopr_chr = ' :'
751	ENDIF
752	ENDDO
753
754	IF ( dopr_chr /= '' ) THEN
755	WRITE ( io, 332 ) dopr_chr
756	ENDIF
757	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
758	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
759	ENDIF
760
761	!
762	!-- 2D-arrays
763	DO av = 0, 1
764
765	i = 1
766	do2d_xy = ''
767	do2d_xz = ''
768	do2d_yz = ''
769	DO WHILE ( do2d(av,i) /= ' ' )
770
771	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
772	do2d_mode = do2d(av,i)(l-1:l)
773
774	SELECT CASE ( do2d_mode )
775	CASE ( 'xy' )
776	ll = LEN_TRIM( do2d_xy )
777	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
778	CASE ( 'xz' )
779	ll = LEN_TRIM( do2d_xz )
780	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
781	CASE ( 'yz' )
782	ll = LEN_TRIM( do2d_yz )
783	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
784	END SELECT
785
786	i = i + 1
787
788	ENDDO
789
790	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
791	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
792	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
793	( netcdf_output .OR. iso2d_output ) ) THEN
794
795	IF ( av == 0 ) THEN
796	WRITE ( io, 334 ) ''
797	ELSE
798	WRITE ( io, 334 ) '(time-averaged)'
799	ENDIF
800
801	IF ( do2d_at_begin ) THEN
802	begin_chr = 'and at the start'
803	ELSE
804	begin_chr = ''
805	ENDIF
806
807	output_format = ''
808	IF ( netcdf_output ) THEN
809	IF ( netcdf_data_format == 1 ) THEN
810	output_format = 'NetCDF classic'
811	ELSEIF ( netcdf_data_format == 2 ) THEN
812	output_format = 'NetCDF 64bit offset'
813	ELSEIF ( netcdf_data_format == 3 ) THEN
814	output_format = 'NetCDF4/HDF5'
815	ELSEIF ( netcdf_data_format == 4 ) THEN
816	output_format = 'NetCDF4/HDF5 clasic'
817	ENDIF
818	ENDIF
819	IF ( iso2d_output ) THEN
820	IF ( netcdf_output ) THEN
821	output_format = TRIM( output_format ) // ' and iso2d'
822	ELSE
823	output_format = 'iso2d'
824	ENDIF
825	ENDIF
826	WRITE ( io, 344 ) output_format
827
828	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
829	i = 1
830	slices = '/'
831	coordinates = '/'
832	!
833	!-- Building strings with index and coordinate informations of the
834	!-- slices
835	DO WHILE ( section(i,1) /= -9999 )
836
837	WRITE (section_chr,'(I5)') section(i,1)
838	section_chr = ADJUSTL( section_chr )
839	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
840
841	IF ( section(i,1) == -1 ) THEN
842	WRITE (coor_chr,'(F10.1)') -1.0
843	ELSE
844	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
845	ENDIF
846	coor_chr = ADJUSTL( coor_chr )
847	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
848
849	i = i + 1
850	ENDDO
851	IF ( av == 0 ) THEN
852	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
853	TRIM( begin_chr ), 'k', TRIM( slices ), &
854	TRIM( coordinates )
855	IF ( skip_time_do2d_xy /= 0.0 ) THEN
856	WRITE ( io, 339 ) skip_time_do2d_xy
857	ENDIF
858	ELSE
859	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
860	TRIM( begin_chr ), averaging_interval, &
861	dt_averaging_input, 'k', TRIM( slices ), &
862	TRIM( coordinates )
863	IF ( skip_time_data_output_av /= 0.0 ) THEN
864	WRITE ( io, 339 ) skip_time_data_output_av
865	ENDIF
866	ENDIF
867
868	ENDIF
869
870	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
871	i = 1
872	slices = '/'
873	coordinates = '/'
874	!
875	!-- Building strings with index and coordinate informations of the
876	!-- slices
877	DO WHILE ( section(i,2) /= -9999 )
878
879	WRITE (section_chr,'(I5)') section(i,2)
880	section_chr = ADJUSTL( section_chr )
881	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
882
883	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
884	coor_chr = ADJUSTL( coor_chr )
885	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
886
887	i = i + 1
888	ENDDO
889	IF ( av == 0 ) THEN
890	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
891	TRIM( begin_chr ), 'j', TRIM( slices ), &
892	TRIM( coordinates )
893	IF ( skip_time_do2d_xz /= 0.0 ) THEN
894	WRITE ( io, 339 ) skip_time_do2d_xz
895	ENDIF
896	ELSE
897	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
898	TRIM( begin_chr ), averaging_interval, &
899	dt_averaging_input, 'j', TRIM( slices ), &
900	TRIM( coordinates )
901	IF ( skip_time_data_output_av /= 0.0 ) THEN
902	WRITE ( io, 339 ) skip_time_data_output_av
903	ENDIF
904	ENDIF
905	ENDIF
906
907	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
908	i = 1
909	slices = '/'
910	coordinates = '/'
911	!
912	!-- Building strings with index and coordinate informations of the
913	!-- slices
914	DO WHILE ( section(i,3) /= -9999 )
915
916	WRITE (section_chr,'(I5)') section(i,3)
917	section_chr = ADJUSTL( section_chr )
918	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
919
920	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
921	coor_chr = ADJUSTL( coor_chr )
922	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
923
924	i = i + 1
925	ENDDO
926	IF ( av == 0 ) THEN
927	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
928	TRIM( begin_chr ), 'i', TRIM( slices ), &
929	TRIM( coordinates )
930	IF ( skip_time_do2d_yz /= 0.0 ) THEN
931	WRITE ( io, 339 ) skip_time_do2d_yz
932	ENDIF
933	ELSE
934	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
935	TRIM( begin_chr ), averaging_interval, &
936	dt_averaging_input, 'i', TRIM( slices ), &
937	TRIM( coordinates )
938	IF ( skip_time_data_output_av /= 0.0 ) THEN
939	WRITE ( io, 339 ) skip_time_data_output_av
940	ENDIF
941	ENDIF
942	ENDIF
943
944	ENDIF
945
946	ENDDO
947
948	!
949	!-- 3d-arrays
950	DO av = 0, 1
951
952	i = 1
953	do3d_chr = ''
954	DO WHILE ( do3d(av,i) /= ' ' )
955
956	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
957	i = i + 1
958
959	ENDDO
960
961	IF ( do3d_chr /= '' ) THEN
962	IF ( av == 0 ) THEN
963	WRITE ( io, 336 ) ''
964	ELSE
965	WRITE ( io, 336 ) '(time-averaged)'
966	ENDIF
967
968	output_format = ''
969	IF ( netcdf_output ) THEN
970	IF ( netcdf_data_format == 1 ) THEN
971	output_format = 'NetCDF classic'
972	ELSEIF ( netcdf_data_format == 2 ) THEN
973	output_format = 'NetCDF 64bit offset'
974	ELSEIF ( netcdf_data_format == 3 ) THEN
975	output_format = 'NetCDF4/HDF5'
976	ELSEIF ( netcdf_data_format == 4 ) THEN
977	output_format = 'NetCDF4/HDF5 clasic'
978	ENDIF
979	ENDIF
980	IF ( avs_output ) THEN
981	IF ( netcdf_output ) THEN
982	output_format = TRIM( output_format ) // ' and avs'
983	ELSE
984	output_format = 'avs'
985	ENDIF
986	ENDIF
987	WRITE ( io, 344 ) output_format
988
989	IF ( do3d_at_begin ) THEN
990	begin_chr = 'and at the start'
991	ELSE
992	begin_chr = ''
993	ENDIF
994	IF ( av == 0 ) THEN
995	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
996	zu(nz_do3d), nz_do3d
997	ELSE
998	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
999	TRIM( begin_chr ), averaging_interval, &
1000	dt_averaging_input, zu(nz_do3d), nz_do3d
1001	ENDIF
1002
1003	IF ( do3d_compress ) THEN
1004	do3d_chr = ''
1005	i = 1
1006	DO WHILE ( do3d(av,i) /= ' ' )
1007
1008	SELECT CASE ( do3d(av,i) )
1009	CASE ( 'u' )
1010	j = 1
1011	CASE ( 'v' )
1012	j = 2
1013	CASE ( 'w' )
1014	j = 3
1015	CASE ( 'p' )
1016	j = 4
1017	CASE ( 'pt' )
1018	j = 5
1019	END SELECT
1020	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
1021	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
1022	':' // prec // ','
1023	i = i + 1
1024
1025	ENDDO
1026	WRITE ( io, 338 ) do3d_chr
1027
1028	ENDIF
1029
1030	IF ( av == 0 ) THEN
1031	IF ( skip_time_do3d /= 0.0 ) THEN
1032	WRITE ( io, 339 ) skip_time_do3d
1033	ENDIF
1034	ELSE
1035	IF ( skip_time_data_output_av /= 0.0 ) THEN
1036	WRITE ( io, 339 ) skip_time_data_output_av
1037	ENDIF
1038	ENDIF
1039
1040	ENDIF
1041
1042	ENDDO
1043
1044	!
1045	!-- masked arrays
1046	IF ( masks > 0 ) WRITE ( io, 345 ) &
1047	mask_scale_x, mask_scale_y, mask_scale_z
1048	DO mid = 1, masks
1049	DO av = 0, 1
1050
1051	i = 1
1052	domask_chr = ''
1053	DO WHILE ( domask(mid,av,i) /= ' ' )
1054	domask_chr = TRIM( domask_chr ) // ' ' // &
1055	TRIM( domask(mid,av,i) ) // ','
1056	i = i + 1
1057	ENDDO
1058
1059	IF ( domask_chr /= '' ) THEN
1060	IF ( av == 0 ) THEN
1061	WRITE ( io, 346 ) '', mid
1062	ELSE
1063	WRITE ( io, 346 ) ' (time-averaged)', mid
1064	ENDIF
1065
1066	output_format = ''
1067	IF ( netcdf_output ) THEN
1068	IF ( netcdf_data_format == 1 ) THEN
1069	output_format = 'NetCDF classic'
1070	ELSEIF ( netcdf_data_format == 2 ) THEN
1071	output_format = 'NetCDF 64bit offset'
1072	ELSEIF ( netcdf_data_format == 3 ) THEN
1073	output_format = 'NetCDF4/HDF5'
1074	ELSEIF ( netcdf_data_format == 4 ) THEN
1075	output_format = 'NetCDF4/HDF5 clasic'
1076	ENDIF
1077	ENDIF
1078	WRITE ( io, 344 ) output_format
1079
1080	IF ( av == 0 ) THEN
1081	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
1082	ELSE
1083	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
1084	averaging_interval, dt_averaging_input
1085	ENDIF
1086
1087	IF ( av == 0 ) THEN
1088	IF ( skip_time_domask(mid) /= 0.0 ) THEN
1089	WRITE ( io, 339 ) skip_time_domask(mid)
1090	ENDIF
1091	ELSE
1092	IF ( skip_time_data_output_av /= 0.0 ) THEN
1093	WRITE ( io, 339 ) skip_time_data_output_av
1094	ENDIF
1095	ENDIF
1096	!
1097	!-- output locations
1098	DO dim = 1, 3
1099	IF ( mask(mid,dim,1) >= 0.0 ) THEN
1100	count = 0
1101	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
1102	count = count + 1
1103	ENDDO
1104	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
1105	mask(mid,dim,:count)
1106	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
1107	mask_loop(mid,dim,2) < 0.0 .AND. &
1108	mask_loop(mid,dim,3) == 0.0 ) THEN
1109	WRITE ( io, 350 ) dir(dim), dir(dim)
1110	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
1111	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1112	mask_loop(mid,dim,1:2)
1113	ELSE
1114	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
1115	mask_loop(mid,dim,1:3)
1116	ENDIF
1117	ENDDO
1118	ENDIF
1119
1120	ENDDO
1121	ENDDO
1122
1123	!
1124	!-- Timeseries
1125	IF ( dt_dots /= 9999999.9 ) THEN
1126	WRITE ( io, 340 )
1127
1128	output_format = ''
1129	IF ( netcdf_output ) THEN
1130	IF ( netcdf_data_format == 1 ) THEN
1131	output_format = 'NetCDF classic'
1132	ELSE
1133	output_format = 'NetCDF 64bit offset'
1134	ENDIF
1135	ENDIF
1136	IF ( profil_output ) THEN
1137	IF ( netcdf_output ) THEN
1138	output_format = TRIM( output_format ) // ' and profil'
1139	ELSE
1140	output_format = 'profil'
1141	ENDIF
1142	ENDIF
1143	WRITE ( io, 344 ) output_format
1144	WRITE ( io, 341 ) dt_dots
1145	ENDIF
1146
1147	#if defined( __dvrp_graphics )
1148	!
1149	!-- Dvrp-output
1150	IF ( dt_dvrp /= 9999999.9 ) THEN
1151	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
1152	TRIM( dvrp_username ), TRIM( dvrp_directory )
1153	i = 1
1154	l = 0
1155	m = 0
1156	DO WHILE ( mode_dvrp(i) /= ' ' )
1157	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
1158	READ ( mode_dvrp(i), '(10X,I2)' ) j
1159	l = l + 1
1160	IF ( do3d(0,j) /= ' ' ) THEN
1161	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
1162	isosurface_color(:,l)
1163	ENDIF
1164	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
1165	READ ( mode_dvrp(i), '(6X,I2)' ) j
1166	m = m + 1
1167	IF ( do2d(0,j) /= ' ' ) THEN
1168	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
1169	slicer_range_limits_dvrp(:,m)
1170	ENDIF
1171	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
1172	WRITE ( io, 363 ) dvrp_psize
1173	IF ( particle_dvrpsize /= 'none' ) THEN
1174	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
1175	dvrpsize_interval
1176	ENDIF
1177	IF ( particle_color /= 'none' ) THEN
1178	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
1179	color_interval
1180	ENDIF
1181	ENDIF
1182	i = i + 1
1183	ENDDO
1184
1185	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
1186	superelevation_y, superelevation, clip_dvrp_l, &
1187	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
1188
1189	IF ( TRIM( topography ) /= 'flat' ) THEN
1190	WRITE ( io, 366 ) topography_color
1191	IF ( cluster_size > 1 ) THEN
1192	WRITE ( io, 367 ) cluster_size
1193	ENDIF
1194	ENDIF
1195
1196	ENDIF
1197	#endif
1198
1199	#if defined( __spectra )
1200	!
1201	!-- Spectra output
1202	IF ( dt_dosp /= 9999999.9 ) THEN
1203	WRITE ( io, 370 )
1204
1205	output_format = ''
1206	IF ( netcdf_output ) THEN
1207	IF ( netcdf_data_format == 1 ) THEN
1208	output_format = 'NetCDF classic'
1209	ELSE
1210	output_format = 'NetCDF 64bit offset'
1211	ENDIF
1212	ENDIF
1213	IF ( profil_output ) THEN
1214	IF ( netcdf_output ) THEN
1215	output_format = TRIM( output_format ) // ' and profil'
1216	ELSE
1217	output_format = 'profil'
1218	ENDIF
1219	ENDIF
1220	WRITE ( io, 344 ) output_format
1221	WRITE ( io, 371 ) dt_dosp
1222	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
1223	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
1224	( spectra_direction(i), i = 1,10 ), &
1225	( comp_spectra_level(i), i = 1,100 ), &
1226	( plot_spectra_level(i), i = 1,100 ), &
1227	averaging_interval_sp, dt_averaging_input_pr
1228	ENDIF
1229	#endif
1230
1231	WRITE ( io, 99 )
1232
1233	!
1234	!-- Physical quantities
1235	WRITE ( io, 400 )
1236
1237	!
1238	!-- Geostrophic parameters
1239	WRITE ( io, 410 ) omega, phi, f, fs
1240
1241	!
1242	!-- Other quantities
1243	WRITE ( io, 411 ) g
1244	IF ( use_reference ) THEN
1245	IF ( ocean ) THEN
1246	WRITE ( io, 412 ) prho_reference
1247	ELSE
1248	WRITE ( io, 413 ) pt_reference
1249	ENDIF
1250	ENDIF
1251
1252	!
1253	!-- Cloud physics parameters
1254	IF ( cloud_physics ) THEN
1255	WRITE ( io, 415 )
1256	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
1257	ENDIF
1258
1259	!-- Profile of the geostrophic wind (component ug)
1260	!-- Building output strings
1261	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
1262	gradients = '------'
1263	slices = ' 0'
1264	coordinates = ' 0.0'
1265	i = 1
1266	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
1267
1268	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
1269	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
1270
1271	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
1272	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1273
1274	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
1275	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1276
1277	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
1278	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1279
1280	IF ( i == 10 ) THEN
1281	EXIT
1282	ELSE
1283	i = i + 1
1284	ENDIF
1285
1286	ENDDO
1287
1288	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
1289	TRIM( gradients ), TRIM( slices )
1290
1291	!-- Profile of the geostrophic wind (component vg)
1292	!-- Building output strings
1293	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
1294	gradients = '------'
1295	slices = ' 0'
1296	coordinates = ' 0.0'
1297	i = 1
1298	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
1299
1300	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
1301	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
1302
1303	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
1304	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1305
1306	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
1307	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1308
1309	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
1310	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1311
1312	IF ( i == 10 ) THEN
1313	EXIT
1314	ELSE
1315	i = i + 1
1316	ENDIF
1317
1318	ENDDO
1319
1320	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
1321	TRIM( gradients ), TRIM( slices )
1322
1323	!
1324	!-- Initial wind profiles
1325	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
1326
1327	!
1328	!-- Initial temperature profile
1329	!-- Building output strings, starting with surface temperature
1330	WRITE ( temperatures, '(F6.2)' ) pt_surface
1331	gradients = '------'
1332	slices = ' 0'
1333	coordinates = ' 0.0'
1334	i = 1
1335	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1336
1337	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1338	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1339
1340	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1341	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1342
1343	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1344	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1345
1346	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1347	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1348
1349	IF ( i == 10 ) THEN
1350	EXIT
1351	ELSE
1352	i = i + 1
1353	ENDIF
1354
1355	ENDDO
1356
1357	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1358	TRIM( gradients ), TRIM( slices )
1359
1360	!
1361	!-- Initial humidity profile
1362	!-- Building output strings, starting with surface humidity
1363	IF ( humidity .OR. passive_scalar ) THEN
1364	WRITE ( temperatures, '(E8.1)' ) q_surface
1365	gradients = '--------'
1366	slices = ' 0'
1367	coordinates = ' 0.0'
1368	i = 1
1369	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1370
1371	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1372	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1373
1374	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1375	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1376
1377	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1378	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1379
1380	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1381	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1382
1383	IF ( i == 10 ) THEN
1384	EXIT
1385	ELSE
1386	i = i + 1
1387	ENDIF
1388
1389	ENDDO
1390
1391	IF ( humidity ) THEN
1392	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1393	TRIM( gradients ), TRIM( slices )
1394	ELSE
1395	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1396	TRIM( gradients ), TRIM( slices )
1397	ENDIF
1398	ENDIF
1399
1400	!
1401	!-- Initial salinity profile
1402	!-- Building output strings, starting with surface salinity
1403	IF ( ocean ) THEN
1404	WRITE ( temperatures, '(F6.2)' ) sa_surface
1405	gradients = '------'
1406	slices = ' 0'
1407	coordinates = ' 0.0'
1408	i = 1
1409	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1410
1411	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1412	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1413
1414	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1415	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1416
1417	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1418	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1419
1420	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1421	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1422
1423	IF ( i == 10 ) THEN
1424	EXIT
1425	ELSE
1426	i = i + 1
1427	ENDIF
1428
1429	ENDDO
1430
1431	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1432	TRIM( gradients ), TRIM( slices )
1433	ENDIF
1434
1435	!
1436	!-- Profile for the large scale vertial velocity
1437	!-- Building output strings, starting with surface value
1438	IF ( large_scale_subsidence ) THEN
1439	temperatures = ' 0.0'
1440	gradients = '------'
1441	slices = ' 0'
1442	coordinates = ' 0.0'
1443	i = 1
1444	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
1445
1446	WRITE (coor_chr,'(E10.2,7X)') &
1447	w_subs(subs_vertical_gradient_level_i(i))
1448	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1449
1450	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
1451	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1452
1453	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
1454	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1455
1456	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
1457	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1458
1459	IF ( i == 10 ) THEN
1460	EXIT
1461	ELSE
1462	i = i + 1
1463	ENDIF
1464
1465	ENDDO
1466
1467	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
1468	TRIM( gradients ), TRIM( slices )
1469	ENDIF
1470
1471	!
1472	!-- LES / turbulence parameters
1473	WRITE ( io, 450 )
1474
1475	!--
1476	! ... LES-constants used must still be added here
1477	!--
1478	IF ( constant_diffusion ) THEN
1479	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1480	prandtl_number
1481	ENDIF
1482	IF ( .NOT. constant_diffusion) THEN
1483	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1484	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1485	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1486	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1487	ENDIF
1488
1489	!
1490	!-- Special actions during the run
1491	WRITE ( io, 470 )
1492	IF ( create_disturbances ) THEN
1493	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1494	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1495	zu(disturbance_level_ind_t), disturbance_level_ind_t
1496	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
1497	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1498	ELSE
1499	WRITE ( io, 473 ) disturbance_energy_limit
1500	ENDIF
1501	WRITE ( io, 474 ) TRIM( random_generator )
1502	ENDIF
1503	IF ( pt_surface_initial_change /= 0.0 ) THEN
1504	WRITE ( io, 475 ) pt_surface_initial_change
1505	ENDIF
1506	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1507	WRITE ( io, 476 ) q_surface_initial_change
1508	ENDIF
1509	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1510	WRITE ( io, 477 ) q_surface_initial_change
1511	ENDIF
1512
1513	IF ( particle_advection ) THEN
1514	!
1515	!-- Particle attributes
1516	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1517	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1518	end_time_prel, dt_sort_particles
1519	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1520	IF ( random_start_position ) WRITE ( io, 481 )
1521	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1522	WRITE ( io, 495 ) total_number_of_particles
1523	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1524	WRITE ( io, 483 ) maximum_number_of_tailpoints
1525	IF ( minimum_tailpoint_distance /= 0 ) THEN
1526	WRITE ( io, 484 ) total_number_of_tails, &
1527	minimum_tailpoint_distance, &
1528	maximum_tailpoint_age
1529	ENDIF
1530	ENDIF
1531	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1532	WRITE ( io, 485 ) dt_write_particle_data
1533	output_format = ''
1534	IF ( netcdf_output ) THEN
1535	IF ( netcdf_data_format > 1 ) THEN
1536	output_format = 'netcdf (64 bit offset) and binary'
1537	ELSE
1538	output_format = 'netcdf and binary'
1539	ENDIF
1540	ELSE
1541	output_format = 'binary'
1542	ENDIF
1543	WRITE ( io, 344 ) output_format
1544	ENDIF
1545	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1546	IF ( write_particle_statistics ) WRITE ( io, 486 )
1547
1548	WRITE ( io, 487 ) number_of_particle_groups
1549
1550	DO i = 1, number_of_particle_groups
1551	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1552	WRITE ( io, 490 ) i, 0.0
1553	WRITE ( io, 492 )
1554	ELSE
1555	WRITE ( io, 490 ) i, radius(i)
1556	IF ( density_ratio(i) /= 0.0 ) THEN
1557	WRITE ( io, 491 ) density_ratio(i)
1558	ELSE
1559	WRITE ( io, 492 )
1560	ENDIF
1561	ENDIF
1562	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1563	pdx(i), pdy(i), pdz(i)
1564	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
1565	ENDDO
1566
1567	ENDIF
1568
1569
1570	!
1571	!-- Parameters of 1D-model
1572	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1573	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1574	mixing_length_1d, dissipation_1d
1575	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1576	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1577	ENDIF
1578	ENDIF
1579
1580	!
1581	!-- User-defined informations
1582	CALL user_header( io )
1583
1584	WRITE ( io, 99 )
1585
1586	!
1587	!-- Write buffer contents to disc immediately
1588	CALL local_flush( io )
1589
1590	!
1591	!-- Here the FORMATs start
1592
1593	99 FORMAT (1X,78('-'))
1594	100 FORMAT (/1X,'***************************',9X,42('-')/ &
1595	1X,'* ',A,' *',9X,A/ &
1596	1X,'***************************',9X,42('-'))
1597	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
1598	37X,42('-'))
1599	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
1600	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
1601	' Run on host: ',A10)
1602	#if defined( __parallel )
1603	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
1604	')',1X,A)
1605	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
1606	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1607	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1608	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1609	37X,'because the job is running on an SMP-cluster')
1610	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1611	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
1612	#endif
1613	110 FORMAT (/' Numerical Schemes:'/ &
1614	' -----------------'/)
1615	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1616	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1617	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1618	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1619	' or Upstream')
1620	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1621	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1622	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1623	' or Upstream')
1624	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1625	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1626	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1627	' Translation velocity = ',A/ &
1628	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1629	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1630	' of timestep changes)')
1631	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1632	' timestep changes')
1633	122 FORMAT (' --> Time differencing scheme: ',A)
1634	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1635	' maximum damping coefficient: ',F5.3, ' 1/s')
1636	124 FORMAT (' Spline-overshoots are being suppressed')
1637	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1638	' of'/ &
1639	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1640	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1641	' of'/ &
1642	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1643	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1644	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1645	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1646	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1647	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1648	130 FORMAT (' --> Additional prognostic equation for the total water content')
1649	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1650	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1651	' effective emissivity scheme')
1652	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1653	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1654	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1655	A,'-cycle)'/ &
1656	' number of grid levels: ',I2/ &
1657	' Gauss-Seidel red/black iterations: ',I2)
1658	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1659	I3,')')
1660	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1661	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1662	I3,')'/ &
1663	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1664	I3,')')
1665	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1666	139 FORMAT (' --> Loop optimization method: ',A)
1667	140 FORMAT (' maximum residual allowed: ',E10.3)
1668	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1669	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1670	'step')
1671	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1672	'kinetic energy')
1673	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1674	'conserved'/ &
1675	' using the ',A,' mode')
1676	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
1677	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
1678	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
1679	/' starting from dp_level_b =', F8.3, 'm', A /)
1680	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
1681	'prognostic equation for')
1682	154 FORMAT (' the potential temperature')
1683	200 FORMAT (//' Run time and time step information:'/ &
1684	' ----------------------------------'/)
1685	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1686	' CFL-factor: ',F4.2)
1687	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1688	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1689	' End time: ',F9.3,' s')
1690	204 FORMAT ( A,F9.3,' s')
1691	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1692	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1693	' CPU-time used: ',F9.3,' s per timestep: ', &
1694	' ',F9.3,' s'/ &
1695	' per second of simulated tim', &
1696	'e: ',F9.3,' s')
1697	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
1698	250 FORMAT (//' Computational grid and domain size:'/ &
1699	' ----------------------------------'// &
1700	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1701	' m dz = ',F7.3,' m'/ &
1702	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1703	' m z(u) = ',F10.3,' m'/)
1704	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1705	' factor: ',F5.3/ &
1706	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1707	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1708	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1709	255 FORMAT (' Subdomains have equal size')
1710	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1711	'have smaller sizes'/ &
1712	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1713	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1714	' degrees')
1715	270 FORMAT (//' Topography informations:'/ &
1716	' -----------------------'// &
1717	1X,'Topography: ',A)
1718	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1719	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1720	' / ',I4)
1721	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
1722	' direction' / &
1723	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
1724	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
1725	278 FORMAT (' Topography grid definition convention:'/ &
1726	' cell edge (staggered grid points'/ &
1727	' (u in x-direction, v in y-direction))' /)
1728	279 FORMAT (' Topography grid definition convention:'/ &
1729	' cell center (scalar grid points)' /)
1730	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
1731	' ------------------------------'// &
1732	' Canopy mode: ', A / &
1733	' Canopy top: ',I4 / &
1734	' Leaf drag coefficient: ',F6.2 /)
1735	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
1736	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
1737	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
1738	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
1739	' Height: ',A,' m'/ &
1740	' Leaf area density: ',A,' m2/m3'/ &
1741	' Gradient: ',A,' m2/m4'/ &
1742	' Gridpoint: ',A)
1743
1744	300 FORMAT (//' Boundary conditions:'/ &
1745	' -------------------'// &
1746	' p uv ', &
1747	' pt'// &
1748	' B. bound.: ',A/ &
1749	' T. bound.: ',A)
1750	301 FORMAT (/' ',A// &
1751	' B. bound.: ',A/ &
1752	' T. bound.: ',A)
1753	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1754	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1755	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1756	'computational u,v-level:'// &
1757	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1758	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1759	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1760	307 FORMAT (' Heatflux has a random normal distribution')
1761	308 FORMAT (' Predefined surface temperature')
1762	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1763	310 FORMAT (//' 1D-Model:'// &
1764	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1765	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1766	312 FORMAT (' Predefined surface humidity')
1767	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1768	314 FORMAT (' Predefined scalar value at the surface')
1769	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1770	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1771	'atmosphere model')
1772	317 FORMAT (//' Lateral boundaries:'/ &
1773	' left/right: ',A/ &
1774	' north/south: ',A)
1775	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1776	'max =',F5.1,' m**2/s')
1777	319 FORMAT (' turbulence recycling at inflow switched on'/ &
1778	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
1779	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
1780	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1781	' v: ',F9.6,' m2/s2')
1782	325 FORMAT (//' List output:'/ &
1783	' -----------'// &
1784	' 1D-Profiles:'/ &
1785	' Output every ',F8.2,' s')
1786	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
1787	' Averaging input every ',F8.2,' s')
1788	330 FORMAT (//' Data output:'/ &
1789	' -----------'/)
1790	331 FORMAT (/' 1D-Profiles:')
1791	332 FORMAT (/' ',A)
1792	333 FORMAT (' Output every ',F8.2,' s',/ &
1793	' Time averaged over ',F8.2,' s'/ &
1794	' Averaging input every ',F8.2,' s')
1795	334 FORMAT (/' 2D-Arrays',A,':')
1796	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1797	' Output every ',F8.2,' s ',A/ &
1798	' Cross sections at ',A1,' = ',A/ &
1799	' scalar-coordinates: ',A,' m'/)
1800	336 FORMAT (/' 3D-Arrays',A,':')
1801	337 FORMAT (/' Arrays: ',A/ &
1802	' Output every ',F8.2,' s ',A/ &
1803	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1804	338 FORMAT (' Compressed data output'/ &
1805	' Decimal precision: ',A/)
1806	339 FORMAT (' No output during initial ',F8.2,' s')
1807	340 FORMAT (/' Time series:')
1808	341 FORMAT (' Output every ',F8.2,' s'/)
1809	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1810	' Output every ',F8.2,' s ',A/ &
1811	' Time averaged over ',F8.2,' s'/ &
1812	' Averaging input every ',F8.2,' s'/ &
1813	' Cross sections at ',A1,' = ',A/ &
1814	' scalar-coordinates: ',A,' m'/)
1815	343 FORMAT (/' Arrays: ',A/ &
1816	' Output every ',F8.2,' s ',A/ &
1817	' Time averaged over ',F8.2,' s'/ &
1818	' Averaging input every ',F8.2,' s'/ &
1819	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1820	344 FORMAT (' Output format: ',A/)
1821	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
1822	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
1823	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
1824	' mask_scale_z (in z-direction): ',F9.3, ' m' )
1825	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
1826	347 FORMAT (' Variables: ',A/ &
1827	' Output every ',F8.2,' s')
1828	348 FORMAT (' Variables: ',A/ &
1829	' Output every ',F8.2,' s'/ &
1830	' Time averaged over ',F8.2,' s'/ &
1831	' Averaging input every ',F8.2,' s')
1832	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1833	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
1834	13(' ',8(F8.2,',')/) )
1835	350 FORMAT (/' Output locations in ',A,'-direction: ', &
1836	'all gridpoints along ',A,'-direction (default).' )
1837	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
1838	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
1839	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
1840	#if defined( __dvrp_graphics )
1841	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1842	' Output every ',F7.1,' s'/ &
1843	' Output mode: ',A/ &
1844	' Host / User: ',A,' / ',A/ &
1845	' Directory: ',A// &
1846	' The sequence contains:')
1847	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
1848	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1849	362 FORMAT (/' Slicer plane ',A/ &
1850	' Slicer limits: [',F6.2,',',F6.2,']')
1851	363 FORMAT (/' Particles'/ &
1852	' particle size: ',F7.2,' m')
1853	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
1854	F6.2,',',F6.2,']')
1855	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
1856	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
1857	')'/ &
1858	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
1859	' from y = ',F9.1,' m to y = ',F9.1,' m')
1860	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
1861	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
1862	#endif
1863	#if defined( __spectra )
1864	370 FORMAT (' Spectra:')
1865	371 FORMAT (' Output every ',F7.1,' s'/)
1866	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1867	' Directions: ', 10(A5,',')/ &
1868	' height levels k = ', 20(I3,',')/ &
1869	' ', 20(I3,',')/ &
1870	' ', 20(I3,',')/ &
1871	' ', 20(I3,',')/ &
1872	' ', 19(I3,','),I3,'.'/ &
1873	' height levels selected for standard plot:'/ &
1874	' k = ', 20(I3,',')/ &
1875	' ', 20(I3,',')/ &
1876	' ', 20(I3,',')/ &
1877	' ', 20(I3,',')/ &
1878	' ', 19(I3,','),I3,'.'/ &
1879	' Time averaged over ', F7.1, ' s,' / &
1880	' Profiles for the time averaging are taken every ', &
1881	F6.1,' s')
1882	#endif
1883	400 FORMAT (//' Physical quantities:'/ &
1884	' -------------------'/)
1885	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1886	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1887	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1888	' f* = ',F9.6,' 1/s')
1889	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1890	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1891	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1892	415 FORMAT (/' Cloud physics parameters:'/ &
1893	' ------------------------'/)
1894	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1895	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1896	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1897	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1898	' Vapourization heat : L_v = ',E8.2,' J/kg')
1899	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1900	' Height: ',A,' m'/ &
1901	' Temperature: ',A,' K'/ &
1902	' Gradient: ',A,' K/100m'/ &
1903	' Gridpoint: ',A)
1904	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1905	' Height: ',A,' m'/ &
1906	' Humidity: ',A,' kg/kg'/ &
1907	' Gradient: ',A,' (kg/kg)/100m'/ &
1908	' Gridpoint: ',A)
1909	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1910	' Height: ',A,' m'/ &
1911	' Scalar concentration: ',A,' kg/m**3'/ &
1912	' Gradient: ',A,' (kg/m**3)/100m'/ &
1913	' Gridpoint: ',A)
1914	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1915	' Height: ',A,' m'/ &
1916	' ug: ',A,' m/s'/ &
1917	' Gradient: ',A,' 1/100s'/ &
1918	' Gridpoint: ',A)
1919	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1920	' Height: ',A,' m'/ &
1921	' vg: ',A,' m/s'/ &
1922	' Gradient: ',A,' 1/100s'/ &
1923	' Gridpoint: ',A)
1924	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1925	' Height: ',A,' m'/ &
1926	' Salinity: ',A,' psu'/ &
1927	' Gradient: ',A,' psu/100m'/ &
1928	' Gridpoint: ',A)
1929	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
1930	' Height: ',A,' m'/ &
1931	' w_subs: ',A,' m/s'/ &
1932	' Gradient: ',A,' (m/s)/100m'/ &
1933	' Gridpoint: ',A)
1934	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
1935	' profiles')
1936	450 FORMAT (//' LES / Turbulence quantities:'/ &
1937	' ---------------------------'/)
1938	451 FORMAT (' Diffusion coefficients are constant:'/ &
1939	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1940	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1941	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1942	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1943	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1944	470 FORMAT (//' Actions during the simulation:'/ &
1945	' -----------------------------'/)
1946	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1947	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1948	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1949	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1950	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1951	' to i/j =',I4)
1952	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1953	1X,F5.3, ' m2/s2')
1954	474 FORMAT (' Random number generator used : ',A/)
1955	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1956	'respectively, if'/ &
1957	' the value is negative) by ',F5.2,' K at the beginning of the',&
1958	' 3D-simulation'/)
1959	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1960	'respectively, if the'/ &
1961	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1962	' the 3D-simulation'/)
1963	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1964	'respectively, if the'/ &
1965	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1966	' the 3D-simulation'/)
1967	480 FORMAT (' Particles:'/ &
1968	' ---------'// &
1969	' Particle advection is active (switched on at t = ', F7.1, &
1970	' s)'/ &
1971	' Start of new particle generations every ',F6.1,' s'/ &
1972	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1973	' bottom: ', A, ' top: ', A/&
1974	' Maximum particle age: ',F9.1,' s'/ &
1975	' Advection stopped at t = ',F9.1,' s'/ &
1976	' Particles are sorted every ',F9.1,' s'/)
1977	481 FORMAT (' Particles have random start positions'/)
1978	482 FORMAT (' Particles are advected only horizontally'/)
1979	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1980	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1981	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1982	' Maximum age of the end of the tail: ',F8.2,' s')
1983	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1984	486 FORMAT (' Particle statistics are written on file'/)
1985	487 FORMAT (' Number of particle groups: ',I2/)
1986	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1987	' minimum timestep for advection: ', F7.5/)
1988	489 FORMAT (' Number of particles simultaneously released at each ', &
1989	'point: ', I5/)
1990	490 FORMAT (' Particle group ',I2,':'/ &
1991	' Particle radius: ',E10.3, 'm')
1992	491 FORMAT (' Particle inertia is activated'/ &
1993	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1994	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1995	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1996	' y:',F8.1,' - ',F8.1,' m'/&
1997	' z:',F8.1,' - ',F8.1,' m'/&
1998	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1999	' m dz = ',F8.1,' m'/)
2000	494 FORMAT (' Output of particle time series in NetCDF format every ', &
2001	F8.2,' s'/)
2002	495 FORMAT (' Number of particles in total domain: ',I10/)
2003	500 FORMAT (//' 1D-Model parameters:'/ &
2004	' -------------------'// &
2005	' Simulation time: ',F8.1,' s'/ &
2006	' Run-controll output every: ',F8.1,' s'/ &
2007	' Vertical profile output every: ',F8.1,' s'/ &
2008	' Mixing length calculation: ',A/ &
2009	' Dissipation calculation: ',A/)
2010	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
2011	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
2012	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
2013
2014
2015	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |