Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 108

Last change on this file since 108 was 108, checked in by letzel, 17 years ago

Improved coupler: evaporation - salinity-flux coupling for humidity = .T.,

avoid MPI hangs when coupled runs terminate, add DOC/app/chapter_3.8;

Optional calculation of km and kh from initial TKE e_init;
Default initialization of km,kh = 0.00001 for ocean = .T.;
Allow data_output_pr= q, wq, w"q", w*q* for humidity = .T.;
Bugfix: Rayleigh damping for ocean fixed.

Property svn:keywords set to Id

File size: 58.8 KB

Line
1	SUBROUTINE header
2
3	!------------------------------------------------------------------------------!
4	! Actual revisions:
5	! -----------------
6	! Output of informations for coupled model runs (boundary conditions etc.)
7	! + output of momentumfluxes at the top boundary
8	! Rayleigh damping for ocean, e_init
9	!
10	! Former revisions:
11	! -----------------
12	! $Id: header.f90 108 2007-08-24 15:10:38Z letzel $
13	!
14	! 97 2007-06-21 08:23:15Z raasch
15	! Adjustments for the ocean version.
16	! use_pt_reference renamed use_reference
17	!
18	! 87 2007-05-22 15:46:47Z raasch
19	! Bugfix: output of use_upstream_for_tke
20	!
21	! 82 2007-04-16 15:40:52Z raasch
22	! Preprocessor strings for different linux clusters changed to "lc",
23	! routine local_flush is used for buffer flushing
24	!
25	! 76 2007-03-29 00:58:32Z raasch
26	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
27	! output of the loop optimization method, moisture renamed humidity,
28	! output of subversion revision number
29	!
30	! 19 2007-02-23 04:53:48Z raasch
31	! Output of scalar flux applied at top boundary
32	!
33	! RCS Log replace by Id keyword, revision history cleaned up
34	!
35	! Revision 1.63 2006/08/22 13:53:13 raasch
36	! Output of dz_max
37	!
38	! Revision 1.1 1997/08/11 06:17:20 raasch
39	! Initial revision
40	!
41	!
42	! Description:
43	! ------------
44	! Writing a header with all important informations about the actual run.
45	! This subroutine is called three times, two times at the beginning
46	! (writing information on files RUN_CONTROL and HEADER) and one time at the
47	! end of the run, then writing additional information about CPU-usage on file
48	! header.
49	!------------------------------------------------------------------------------!
50
51	USE arrays_3d
52	USE control_parameters
53	USE cloud_parameters
54	USE cpulog
55	USE dvrp_variables
56	USE grid_variables
57	USE indices
58	USE model_1d
59	USE particle_attributes
60	USE pegrid
61	USE spectrum
62
63	IMPLICIT NONE
64
65	CHARACTER (LEN=1) :: prec
66	CHARACTER (LEN=2) :: do2d_mode
67	CHARACTER (LEN=5) :: section_chr
68	CHARACTER (LEN=9) :: time_to_string
69	CHARACTER (LEN=10) :: coor_chr, host_chr
70	CHARACTER (LEN=16) :: begin_chr
71	CHARACTER (LEN=21) :: ver_rev
72	CHARACTER (LEN=40) :: output_format
73	CHARACTER (LEN=70) :: char1, char2, coordinates, gradients, dopr_chr, &
74	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
75	run_classification, slices, temperatures, &
76	ugcomponent, vgcomponent
77	CHARACTER (LEN=85) :: roben, runten
78
79	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, i, ihost, io, j, l, ll
80	REAL :: cpuseconds_per_simulated_second
81
82	!
83	!-- Open the output file. At the end of the simulation, output is directed
84	!-- to unit 19.
85	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
86	.NOT. simulated_time_at_begin /= simulated_time ) THEN
87	io = 15 ! header output on file RUN_CONTROL
88	ELSE
89	io = 19 ! header output on file HEADER
90	ENDIF
91	CALL check_open( io )
92
93	!
94	!-- At the end of the run, output file (HEADER) will be rewritten with
95	!-- new informations
96	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
97
98	!
99	!-- Determine kind of model run
100	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
101	run_classification = '3D - restart run'
102	ELSE
103	IF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
104	run_classification = '3D - run without 1D - prerun'
105	ELSEIF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
106	run_classification = '3D - run with 1D - prerun'
107	ELSE
108	PRINT*,'+++ header: unknown action(s): ',initializing_actions
109	ENDIF
110	ENDIF
111	IF ( ocean ) THEN
112	run_classification = 'ocean - ' // run_classification
113	ELSE
114	run_classification = 'atmosphere - ' // run_classification
115	ENDIF
116
117	!
118	!-- Run-identification, date, time, host
119	host_chr = host(1:10)
120	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
121	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
122	IF ( coupling_mode /= 'uncoupled' ) WRITE ( io, 101 ) coupling_mode
123	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
124	ADJUSTR( host_chr )
125	#if defined( __parallel )
126	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
127	char1 = 'calculated'
128	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
129	host(1:2) == 'lc' ) .AND. &
130	npex == -1 .AND. pdims(2) == 1 ) THEN
131	char1 = 'forced'
132	ELSE
133	char1 = 'predefined'
134	ENDIF
135	IF ( threads_per_task == 1 ) THEN
136	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
137	ELSE
138	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
139	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
140	ENDIF
141	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
142	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
143	npex == -1 .AND. pdims(2) == 1 ) &
144	THEN
145	WRITE ( io, 106 )
146	ELSEIF ( pdims(2) == 1 ) THEN
147	WRITE ( io, 107 ) 'x'
148	ELSEIF ( pdims(1) == 1 ) THEN
149	WRITE ( io, 107 ) 'y'
150	ENDIF
151	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
152	#endif
153	WRITE ( io, 99 )
154
155	!
156	!-- Numerical schemes
157	WRITE ( io, 110 )
158	IF ( psolver(1:7) == 'poisfft' ) THEN
159	WRITE ( io, 111 ) TRIM( fft_method )
160	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
161	ELSEIF ( psolver == 'sor' ) THEN
162	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
163	ELSEIF ( psolver == 'multigrid' ) THEN
164	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
165	IF ( mg_cycles == -1 ) THEN
166	WRITE ( io, 140 ) residual_limit
167	ELSE
168	WRITE ( io, 141 ) mg_cycles
169	ENDIF
170	IF ( mg_switch_to_pe0_level == 0 ) THEN
171	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
172	nzt_mg(1)
173	ELSE
174	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
175	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
176	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
177	nzt_mg(mg_switch_to_pe0_level), &
178	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
179	nzt_mg(1)
180	ENDIF
181	ENDIF
182	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
183	THEN
184	WRITE ( io, 142 )
185	ENDIF
186
187	IF ( momentum_advec == 'pw-scheme' ) THEN
188	WRITE ( io, 113 )
189	ELSE
190	WRITE ( io, 114 )
191	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
192	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
193	overshoot_limit_w /= 0.0 ) THEN
194	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
195	overshoot_limit_w
196	ENDIF
197	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
198	ups_limit_w /= 0.0 ) &
199	THEN
200	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
201	ENDIF
202	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
203	ENDIF
204	IF ( scalar_advec == 'pw-scheme' ) THEN
205	WRITE ( io, 116 )
206	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
207	WRITE ( io, 117 )
208	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
209	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
210	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
211	ENDIF
212	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
213	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
214	ENDIF
215	ELSE
216	WRITE ( io, 118 )
217	ENDIF
218
219	WRITE ( io, 139 ) TRIM( loop_optimization )
220
221	IF ( galilei_transformation ) THEN
222	IF ( use_ug_for_galilei_tr ) THEN
223	char1 = 'geostrophic wind'
224	ELSE
225	char1 = 'mean wind in model domain'
226	ENDIF
227	IF ( simulated_time_at_begin == simulated_time ) THEN
228	char2 = 'at the start of the run'
229	ELSE
230	char2 = 'at the end of the run'
231	ENDIF
232	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
233	advected_distance_x/1000.0, advected_distance_y/1000.0
234	ENDIF
235	IF ( timestep_scheme == 'leapfrog' ) THEN
236	WRITE ( io, 120 )
237	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
238	WRITE ( io, 121 )
239	ELSE
240	WRITE ( io, 122 ) timestep_scheme
241	ENDIF
242	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
243	IF ( rayleigh_damping_factor /= 0.0 ) THEN
244	IF ( .NOT. ocean ) THEN
245	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
246	rayleigh_damping_factor
247	ELSE
248	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
249	rayleigh_damping_factor
250	ENDIF
251	ENDIF
252	IF ( humidity ) THEN
253	IF ( .NOT. cloud_physics ) THEN
254	WRITE ( io, 129 )
255	ELSE
256	WRITE ( io, 130 )
257	WRITE ( io, 131 )
258	IF ( radiation ) WRITE ( io, 132 )
259	IF ( precipitation ) WRITE ( io, 133 )
260	ENDIF
261	ENDIF
262	IF ( passive_scalar ) WRITE ( io, 134 )
263	IF ( conserve_volume_flow ) WRITE ( io, 150 )
264	WRITE ( io, 99 )
265
266	!
267	!-- Runtime and timestep informations
268	WRITE ( io, 200 )
269	IF ( .NOT. dt_fixed ) THEN
270	WRITE ( io, 201 ) dt_max, cfl_factor
271	ELSE
272	WRITE ( io, 202 ) dt
273	ENDIF
274	WRITE ( io, 203 ) simulated_time_at_begin, end_time
275
276	IF ( time_restart /= 9999999.9 .AND. &
277	simulated_time_at_begin == simulated_time ) THEN
278	IF ( dt_restart == 9999999.9 ) THEN
279	WRITE ( io, 204 ) ' Restart at: ',time_restart
280	ELSE
281	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
282	ENDIF
283	ENDIF
284
285	IF ( simulated_time_at_begin /= simulated_time ) THEN
286	i = MAX ( log_point_s(10)%counts, 1 )
287	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
288	cpuseconds_per_simulated_second = 0.0
289	ELSE
290	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
291	( simulated_time - &
292	simulated_time_at_begin )
293	ENDIF
294	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
295	log_point_s(10)%sum / REAL( i ), &
296	cpuseconds_per_simulated_second
297	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
298	IF ( dt_restart == 9999999.9 ) THEN
299	WRITE ( io, 204 ) ' Next restart at: ',time_restart
300	ELSE
301	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
302	ENDIF
303	ENDIF
304	ENDIF
305
306	!
307	!-- Computational grid
308	IF ( .NOT. ocean ) THEN
309	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
310	IF ( dz_stretch_level_index < nzt+1 ) THEN
311	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
312	dz_stretch_factor, dz_max
313	ENDIF
314	ELSE
315	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
316	IF ( dz_stretch_level_index > 0 ) THEN
317	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
318	dz_stretch_factor, dz_max
319	ENDIF
320	ENDIF
321	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
322	MIN( nnz+2, nzt+2 )
323	IF ( numprocs > 1 ) THEN
324	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
325	WRITE ( io, 255 )
326	ELSE
327	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
328	ENDIF
329	ENDIF
330	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
331
332	!
333	!-- Topography
334	WRITE ( io, 270 ) topography
335	SELECT CASE ( TRIM( topography ) )
336
337	CASE ( 'flat' )
338	! no actions necessary
339
340	CASE ( 'single_building' )
341	blx = INT( building_length_x / dx )
342	bly = INT( building_length_y / dy )
343	bh = INT( building_height / dz )
344
345	IF ( building_wall_left == 9999999.9 ) THEN
346	building_wall_left = ( nx + 1 - blx ) / 2 * dx
347	ENDIF
348	bxl = INT ( building_wall_left / dx + 0.5 )
349	bxr = bxl + blx
350
351	IF ( building_wall_south == 9999999.9 ) THEN
352	building_wall_south = ( ny + 1 - bly ) / 2 * dy
353	ENDIF
354	bys = INT ( building_wall_south / dy + 0.5 )
355	byn = bys + bly
356
357	WRITE ( io, 271 ) building_length_x, building_length_y, &
358	building_height, bxl, bxr, bys, byn
359
360	END SELECT
361
362	!
363	!-- Boundary conditions
364	IF ( ibc_p_b == 0 ) THEN
365	runten = 'p(0) = 0 \|'
366	ELSEIF ( ibc_p_b == 1 ) THEN
367	runten = 'p(0) = p(1) \|'
368	ELSE
369	runten = 'p(0) = p(1) +R\|'
370	ENDIF
371	IF ( ibc_p_t == 0 ) THEN
372	roben = 'p(nzt+1) = 0 \|'
373	ELSE
374	roben = 'p(nzt+1) = p(nzt) \|'
375	ENDIF
376
377	IF ( ibc_uv_b == 0 ) THEN
378	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
379	ELSE
380	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
381	ENDIF
382	IF ( ibc_uv_t == 0 ) THEN
383	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
384	ELSE
385	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
386	ENDIF
387
388	IF ( ibc_pt_b == 0 ) THEN
389	runten = TRIM( runten ) // ' pt(0) = pt_surface'
390	ELSEIF ( ibc_pt_b == 1 ) THEN
391	runten = TRIM( runten ) // ' pt(0) = pt(1)'
392	ELSEIF ( ibc_pt_b == 2 ) THEN
393	runten = TRIM( runten ) // ' pt(0) = from coupled model'
394	ENDIF
395	IF ( ibc_pt_t == 0 ) THEN
396	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
397	ELSEIF( ibc_pt_t == 1 ) THEN
398	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
399	ELSEIF( ibc_pt_t == 2 ) THEN
400	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
401	ENDIF
402
403	WRITE ( io, 300 ) runten, roben
404
405	IF ( .NOT. constant_diffusion ) THEN
406	IF ( ibc_e_b == 1 ) THEN
407	runten = 'e(0) = e(1)'
408	ELSE
409	runten = 'e(0) = e(1) = (u/0.1)*2'
410	ENDIF
411	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
412
413	WRITE ( io, 301 ) 'e', runten, roben
414
415	ENDIF
416
417	IF ( ocean ) THEN
418	runten = 'sa(0) = sa(1)'
419	IF ( ibc_sa_t == 0 ) THEN
420	roben = 'sa(nzt+1) = sa_surface'
421	ELSE
422	roben = 'sa(nzt+1) = sa(nzt)'
423	ENDIF
424	WRITE ( io, 301 ) 'sa', runten, roben
425	ENDIF
426
427	IF ( humidity ) THEN
428	IF ( ibc_q_b == 0 ) THEN
429	runten = 'q(0) = q_surface'
430	ELSE
431	runten = 'q(0) = q(1)'
432	ENDIF
433	IF ( ibc_q_t == 0 ) THEN
434	roben = 'q(nzt) = q_top'
435	ELSE
436	roben = 'q(nzt) = q(nzt-1) + dq/dz'
437	ENDIF
438	WRITE ( io, 301 ) 'q', runten, roben
439	ENDIF
440
441	IF ( passive_scalar ) THEN
442	IF ( ibc_q_b == 0 ) THEN
443	runten = 's(0) = s_surface'
444	ELSE
445	runten = 's(0) = s(1)'
446	ENDIF
447	IF ( ibc_q_t == 0 ) THEN
448	roben = 's(nzt) = s_top'
449	ELSE
450	roben = 's(nzt) = s(nzt-1) + ds/dz'
451	ENDIF
452	WRITE ( io, 301 ) 's', runten, roben
453	ENDIF
454
455	IF ( use_surface_fluxes ) THEN
456	WRITE ( io, 303 )
457	IF ( constant_heatflux ) THEN
458	WRITE ( io, 306 ) surface_heatflux
459	IF ( random_heatflux ) WRITE ( io, 307 )
460	ENDIF
461	IF ( humidity .AND. constant_waterflux ) THEN
462	WRITE ( io, 311 ) surface_waterflux
463	ENDIF
464	IF ( passive_scalar .AND. constant_waterflux ) THEN
465	WRITE ( io, 313 ) surface_waterflux
466	ENDIF
467	ENDIF
468
469	IF ( use_top_fluxes ) THEN
470	WRITE ( io, 304 )
471	IF ( coupling_mode == 'uncoupled' ) THEN
472	WRITE ( io, 319 ) top_momentumflux_u, top_momentumflux_v
473	IF ( constant_top_heatflux ) THEN
474	WRITE ( io, 306 ) top_heatflux
475	ENDIF
476	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
477	WRITE ( io, 316 )
478	ENDIF
479	IF ( ocean .AND. constant_top_salinityflux ) THEN
480	WRITE ( io, 309 ) top_salinityflux
481	ENDIF
482	IF ( humidity .OR. passive_scalar ) THEN
483	WRITE ( io, 315 )
484	ENDIF
485	ENDIF
486
487	IF ( prandtl_layer ) THEN
488	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
489	rif_min, rif_max
490	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
491	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
492	WRITE ( io, 312 )
493	ENDIF
494	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
495	WRITE ( io, 314 )
496	ENDIF
497	ELSE
498	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
499	WRITE ( io, 310 ) rif_min, rif_max
500	ENDIF
501	ENDIF
502
503	WRITE ( io, 317 ) bc_lr, bc_ns
504	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
505	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
506	ENDIF
507
508	!
509	!-- Listing of 1D-profiles
510	WRITE ( io, 320 ) dt_dopr_listing
511	IF ( averaging_interval_pr /= 0.0 ) THEN
512	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
513	ENDIF
514
515	!
516	!-- DATA output
517	WRITE ( io, 330 )
518	IF ( averaging_interval_pr /= 0.0 ) THEN
519	WRITE ( io, 321 ) averaging_interval_pr, dt_averaging_input_pr
520	ENDIF
521
522	!
523	!-- 1D-profiles
524	dopr_chr = 'Profile:'
525	IF ( dopr_n /= 0 ) THEN
526	WRITE ( io, 331 )
527
528	output_format = ''
529	IF ( netcdf_output ) THEN
530	IF ( netcdf_64bit ) THEN
531	output_format = 'netcdf (64 bit offset)'
532	ELSE
533	output_format = 'netcdf'
534	ENDIF
535	ENDIF
536	IF ( profil_output ) THEN
537	IF ( netcdf_output ) THEN
538	output_format = TRIM( output_format ) // ' and profil'
539	ELSE
540	output_format = 'profil'
541	ENDIF
542	ENDIF
543	WRITE ( io, 345 ) output_format
544
545	DO i = 1, dopr_n
546	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
547	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
548	WRITE ( io, 332 ) dopr_chr
549	dopr_chr = ' :'
550	ENDIF
551	ENDDO
552
553	IF ( dopr_chr /= '' ) THEN
554	WRITE ( io, 332 ) dopr_chr
555	ENDIF
556	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
557	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
558	ENDIF
559
560	!
561	!-- 2D-arrays
562	DO av = 0, 1
563
564	i = 1
565	do2d_xy = ''
566	do2d_xz = ''
567	do2d_yz = ''
568	DO WHILE ( do2d(av,i) /= ' ' )
569
570	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
571	do2d_mode = do2d(av,i)(l-1:l)
572
573	SELECT CASE ( do2d_mode )
574	CASE ( 'xy' )
575	ll = LEN_TRIM( do2d_xy )
576	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
577	CASE ( 'xz' )
578	ll = LEN_TRIM( do2d_xz )
579	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
580	CASE ( 'yz' )
581	ll = LEN_TRIM( do2d_yz )
582	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
583	END SELECT
584
585	i = i + 1
586
587	ENDDO
588
589	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
590	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
591	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
592	( netcdf_output .OR. iso2d_output ) ) THEN
593
594	IF ( av == 0 ) THEN
595	WRITE ( io, 334 ) ''
596	ELSE
597	WRITE ( io, 334 ) '(time-averaged)'
598	ENDIF
599
600	IF ( do2d_at_begin ) THEN
601	begin_chr = 'and at the start'
602	ELSE
603	begin_chr = ''
604	ENDIF
605
606	output_format = ''
607	IF ( netcdf_output ) THEN
608	IF ( netcdf_64bit ) THEN
609	output_format = 'netcdf (64 bit offset)'
610	ELSE
611	output_format = 'netcdf'
612	ENDIF
613	ENDIF
614	IF ( iso2d_output ) THEN
615	IF ( netcdf_output ) THEN
616	output_format = TRIM( output_format ) // ' and iso2d'
617	ELSE
618	output_format = 'iso2d'
619	ENDIF
620	ENDIF
621	WRITE ( io, 345 ) output_format
622
623	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
624	i = 1
625	slices = '/'
626	coordinates = '/'
627	!
628	!-- Building strings with index and coordinate informations of the
629	!-- slices
630	DO WHILE ( section(i,1) /= -9999 )
631
632	WRITE (section_chr,'(I5)') section(i,1)
633	section_chr = ADJUSTL( section_chr )
634	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
635
636	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
637	coor_chr = ADJUSTL( coor_chr )
638	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
639
640	i = i + 1
641	ENDDO
642	IF ( av == 0 ) THEN
643	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
644	TRIM( begin_chr ), 'k', TRIM( slices ), &
645	TRIM( coordinates )
646	IF ( skip_time_do2d_xy /= 0.0 ) THEN
647	WRITE ( io, 339 ) skip_time_do2d_xy
648	ENDIF
649	ELSE
650	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
651	TRIM( begin_chr ), averaging_interval, &
652	dt_averaging_input, 'k', TRIM( slices ), &
653	TRIM( coordinates )
654	IF ( skip_time_data_output_av /= 0.0 ) THEN
655	WRITE ( io, 339 ) skip_time_data_output_av
656	ENDIF
657	ENDIF
658
659	ENDIF
660
661	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
662	i = 1
663	slices = '/'
664	coordinates = '/'
665	!
666	!-- Building strings with index and coordinate informations of the
667	!-- slices
668	DO WHILE ( section(i,2) /= -9999 )
669
670	WRITE (section_chr,'(I5)') section(i,2)
671	section_chr = ADJUSTL( section_chr )
672	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
673
674	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
675	coor_chr = ADJUSTL( coor_chr )
676	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
677
678	i = i + 1
679	ENDDO
680	IF ( av == 0 ) THEN
681	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
682	TRIM( begin_chr ), 'j', TRIM( slices ), &
683	TRIM( coordinates )
684	IF ( skip_time_do2d_xz /= 0.0 ) THEN
685	WRITE ( io, 339 ) skip_time_do2d_xz
686	ENDIF
687	ELSE
688	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
689	TRIM( begin_chr ), averaging_interval, &
690	dt_averaging_input, 'j', TRIM( slices ), &
691	TRIM( coordinates )
692	IF ( skip_time_data_output_av /= 0.0 ) THEN
693	WRITE ( io, 339 ) skip_time_data_output_av
694	ENDIF
695	ENDIF
696	ENDIF
697
698	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
699	i = 1
700	slices = '/'
701	coordinates = '/'
702	!
703	!-- Building strings with index and coordinate informations of the
704	!-- slices
705	DO WHILE ( section(i,3) /= -9999 )
706
707	WRITE (section_chr,'(I5)') section(i,3)
708	section_chr = ADJUSTL( section_chr )
709	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
710
711	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
712	coor_chr = ADJUSTL( coor_chr )
713	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
714
715	i = i + 1
716	ENDDO
717	IF ( av == 0 ) THEN
718	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
719	TRIM( begin_chr ), 'i', TRIM( slices ), &
720	TRIM( coordinates )
721	IF ( skip_time_do2d_yz /= 0.0 ) THEN
722	WRITE ( io, 339 ) skip_time_do2d_yz
723	ENDIF
724	ELSE
725	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
726	TRIM( begin_chr ), averaging_interval, &
727	dt_averaging_input, 'i', TRIM( slices ), &
728	TRIM( coordinates )
729	IF ( skip_time_data_output_av /= 0.0 ) THEN
730	WRITE ( io, 339 ) skip_time_data_output_av
731	ENDIF
732	ENDIF
733	ENDIF
734
735	ENDIF
736
737	ENDDO
738
739	!
740	!-- 3d-arrays
741	DO av = 0, 1
742
743	i = 1
744	do3d_chr = ''
745	DO WHILE ( do3d(av,i) /= ' ' )
746
747	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
748	i = i + 1
749
750	ENDDO
751
752	IF ( do3d_chr /= '' ) THEN
753	IF ( av == 0 ) THEN
754	WRITE ( io, 336 ) ''
755	ELSE
756	WRITE ( io, 336 ) '(time-averaged)'
757	ENDIF
758
759	output_format = ''
760	IF ( netcdf_output ) THEN
761	IF ( netcdf_64bit .AND. netcdf_64bit_3d ) THEN
762	output_format = 'netcdf (64 bit offset)'
763	ELSE
764	output_format = 'netcdf'
765	ENDIF
766	ENDIF
767	IF ( avs_output ) THEN
768	IF ( netcdf_output ) THEN
769	output_format = TRIM( output_format ) // ' and avs'
770	ELSE
771	output_format = 'avs'
772	ENDIF
773	ENDIF
774	WRITE ( io, 345 ) output_format
775
776	IF ( do3d_at_begin ) THEN
777	begin_chr = 'and at the start'
778	ELSE
779	begin_chr = ''
780	ENDIF
781	IF ( av == 0 ) THEN
782	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
783	zu(nz_do3d), nz_do3d
784	ELSE
785	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
786	TRIM( begin_chr ), averaging_interval, &
787	dt_averaging_input, zu(nz_do3d), nz_do3d
788	ENDIF
789
790	IF ( do3d_compress ) THEN
791	do3d_chr = ''
792	i = 1
793	DO WHILE ( do3d(av,i) /= ' ' )
794
795	SELECT CASE ( do3d(av,i) )
796	CASE ( 'u' )
797	j = 1
798	CASE ( 'v' )
799	j = 2
800	CASE ( 'w' )
801	j = 3
802	CASE ( 'p' )
803	j = 4
804	CASE ( 'pt' )
805	j = 5
806	END SELECT
807	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
808	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
809	':' // prec // ','
810	i = i + 1
811
812	ENDDO
813	WRITE ( io, 338 ) do3d_chr
814
815	ENDIF
816
817	IF ( av == 0 ) THEN
818	IF ( skip_time_do3d /= 0.0 ) THEN
819	WRITE ( io, 339 ) skip_time_do3d
820	ENDIF
821	ELSE
822	IF ( skip_time_data_output_av /= 0.0 ) THEN
823	WRITE ( io, 339 ) skip_time_data_output_av
824	ENDIF
825	ENDIF
826
827	ENDIF
828
829	ENDDO
830
831	!
832	!-- Timeseries
833	IF ( dt_dots /= 9999999.9 ) THEN
834	WRITE ( io, 340 )
835
836	output_format = ''
837	IF ( netcdf_output ) THEN
838	IF ( netcdf_64bit ) THEN
839	output_format = 'netcdf (64 bit offset)'
840	ELSE
841	output_format = 'netcdf'
842	ENDIF
843	ENDIF
844	IF ( profil_output ) THEN
845	IF ( netcdf_output ) THEN
846	output_format = TRIM( output_format ) // ' and profil'
847	ELSE
848	output_format = 'profil'
849	ENDIF
850	ENDIF
851	WRITE ( io, 345 ) output_format
852	WRITE ( io, 341 ) dt_dots
853	ENDIF
854
855	#if defined( __dvrp_graphics )
856	!
857	!-- Dvrp-output
858	IF ( dt_dvrp /= 9999999.9 ) THEN
859	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
860	TRIM( dvrp_username ), TRIM( dvrp_directory )
861	i = 1
862	l = 0
863	DO WHILE ( mode_dvrp(i) /= ' ' )
864	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
865	READ ( mode_dvrp(i), '(10X,I1)' ) j
866	l = l + 1
867	IF ( do3d(0,j) /= ' ' ) THEN
868	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l)
869	ENDIF
870	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
871	READ ( mode_dvrp(i), '(6X,I1)' ) j
872	IF ( do2d(0,j) /= ' ' ) WRITE ( io, 362 ) TRIM( do2d(0,j) )
873	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
874	WRITE ( io, 363 )
875	ENDIF
876	i = i + 1
877	ENDDO
878	ENDIF
879	#endif
880
881	#if defined( __spectra )
882	!
883	!-- Spectra output
884	IF ( dt_dosp /= 9999999.9 ) THEN
885	WRITE ( io, 370 )
886
887	output_format = ''
888	IF ( netcdf_output ) THEN
889	IF ( netcdf_64bit ) THEN
890	output_format = 'netcdf (64 bit offset)'
891	ELSE
892	output_format = 'netcdf'
893	ENDIF
894	ENDIF
895	IF ( profil_output ) THEN
896	IF ( netcdf_output ) THEN
897	output_format = TRIM( output_format ) // ' and profil'
898	ELSE
899	output_format = 'profil'
900	ENDIF
901	ENDIF
902	WRITE ( io, 345 ) output_format
903	WRITE ( io, 371 ) dt_dosp
904	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
905	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
906	( spectra_direction(i), i = 1,10 ), &
907	( comp_spectra_level(i), i = 1,10 ), &
908	( plot_spectra_level(i), i = 1,10 ), &
909	averaging_interval_sp, dt_averaging_input_pr
910	ENDIF
911	#endif
912
913	WRITE ( io, 99 )
914
915	!
916	!-- Physical quantities
917	WRITE ( io, 400 )
918
919	!
920	!-- Geostrophic parameters
921	WRITE ( io, 410 ) omega, phi, f, fs
922
923	!
924	!-- Other quantities
925	WRITE ( io, 411 ) g
926	IF ( use_reference ) THEN
927	IF ( ocean ) THEN
928	WRITE ( io, 412 ) prho_reference
929	ELSE
930	WRITE ( io, 413 ) pt_reference
931	ENDIF
932	ENDIF
933
934	!
935	!-- Cloud physics parameters
936	IF ( cloud_physics ) THEN
937	WRITE ( io, 415 )
938	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
939	ENDIF
940
941	!-- Profile of the geostrophic wind (component ug)
942	!-- Building output strings
943	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
944	gradients = '------'
945	slices = ' 0'
946	coordinates = ' 0.0'
947	i = 1
948	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
949
950	WRITE (coor_chr,'(F6.2,4X)') ug(ug_vertical_gradient_level_ind(i))
951	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
952
953	WRITE (coor_chr,'(F6.2,4X)') ug_vertical_gradient(i)
954	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
955
956	WRITE (coor_chr,'(I6,4X)') ug_vertical_gradient_level_ind(i)
957	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
958
959	WRITE (coor_chr,'(F6.1,4X)') ug_vertical_gradient_level(i)
960	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
961
962	i = i + 1
963	ENDDO
964
965	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
966	TRIM( gradients ), TRIM( slices )
967
968	!-- Profile of the geostrophic wind (component vg)
969	!-- Building output strings
970	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
971	gradients = '------'
972	slices = ' 0'
973	coordinates = ' 0.0'
974	i = 1
975	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
976
977	WRITE (coor_chr,'(F6.2,4X)') vg(vg_vertical_gradient_level_ind(i))
978	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
979
980	WRITE (coor_chr,'(F6.2,4X)') vg_vertical_gradient(i)
981	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
982
983	WRITE (coor_chr,'(I6,4X)') vg_vertical_gradient_level_ind(i)
984	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
985
986	WRITE (coor_chr,'(F6.1,4X)') vg_vertical_gradient_level(i)
987	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
988
989	i = i + 1
990	ENDDO
991
992	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
993	TRIM( gradients ), TRIM( slices )
994
995	!
996	!-- Initial temperature profile
997	!-- Building output strings, starting with surface temperature
998	WRITE ( temperatures, '(F6.2)' ) pt_surface
999	gradients = '------'
1000	slices = ' 0'
1001	coordinates = ' 0.0'
1002	i = 1
1003	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
1004
1005	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
1006	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1007
1008	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
1009	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1010
1011	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
1012	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1013
1014	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
1015	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1016
1017	i = i + 1
1018	ENDDO
1019
1020	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
1021	TRIM( gradients ), TRIM( slices )
1022
1023	!
1024	!-- Initial humidity profile
1025	!-- Building output strings, starting with surface humidity
1026	IF ( humidity .OR. passive_scalar ) THEN
1027	WRITE ( temperatures, '(E8.1)' ) q_surface
1028	gradients = '--------'
1029	slices = ' 0'
1030	coordinates = ' 0.0'
1031	i = 1
1032	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
1033
1034	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
1035	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1036
1037	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
1038	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1039
1040	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
1041	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1042
1043	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
1044	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1045
1046	i = i + 1
1047	ENDDO
1048
1049	IF ( humidity ) THEN
1050	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
1051	TRIM( gradients ), TRIM( slices )
1052	ELSE
1053	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
1054	TRIM( gradients ), TRIM( slices )
1055	ENDIF
1056	ENDIF
1057
1058	!
1059	!-- Initial salinity profile
1060	!-- Building output strings, starting with surface salinity
1061	IF ( ocean ) THEN
1062	WRITE ( temperatures, '(F6.2)' ) sa_surface
1063	gradients = '------'
1064	slices = ' 0'
1065	coordinates = ' 0.0'
1066	i = 1
1067	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
1068
1069	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
1070	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
1071
1072	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
1073	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
1074
1075	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
1076	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
1077
1078	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
1079	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
1080
1081	i = i + 1
1082	ENDDO
1083
1084	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
1085	TRIM( gradients ), TRIM( slices )
1086	ENDIF
1087
1088	!
1089	!-- LES / turbulence parameters
1090	WRITE ( io, 450 )
1091
1092	!--
1093	! ... LES-constants used must still be added here
1094	!--
1095	IF ( constant_diffusion ) THEN
1096	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
1097	prandtl_number
1098	ENDIF
1099	IF ( .NOT. constant_diffusion) THEN
1100	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
1101	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
1102	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
1103	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
1104	ENDIF
1105
1106	!
1107	!-- Special actions during the run
1108	WRITE ( io, 470 )
1109	IF ( create_disturbances ) THEN
1110	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
1111	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
1112	zu(disturbance_level_ind_t), disturbance_level_ind_t
1113	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
1114	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
1115	ELSE
1116	WRITE ( io, 473 ) disturbance_energy_limit
1117	ENDIF
1118	WRITE ( io, 474 ) TRIM( random_generator )
1119	ENDIF
1120	IF ( pt_surface_initial_change /= 0.0 ) THEN
1121	WRITE ( io, 475 ) pt_surface_initial_change
1122	ENDIF
1123	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
1124	WRITE ( io, 476 ) q_surface_initial_change
1125	ENDIF
1126	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
1127	WRITE ( io, 477 ) q_surface_initial_change
1128	ENDIF
1129
1130	IF ( particle_advection ) THEN
1131	!
1132	!-- Particle attributes
1133	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
1134	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
1135	end_time_prel
1136	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
1137	IF ( random_start_position ) WRITE ( io, 481 )
1138	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
1139	WRITE ( io, 495 ) total_number_of_particles
1140	IF ( .NOT. vertical_particle_advection ) WRITE ( io, 482 )
1141	IF ( maximum_number_of_tailpoints /= 0 ) THEN
1142	WRITE ( io, 483 ) maximum_number_of_tailpoints
1143	IF ( minimum_tailpoint_distance /= 0 ) THEN
1144	WRITE ( io, 484 ) total_number_of_tails, &
1145	minimum_tailpoint_distance, &
1146	maximum_tailpoint_age
1147	ENDIF
1148	ENDIF
1149	IF ( dt_write_particle_data /= 9999999.9 ) THEN
1150	WRITE ( io, 485 ) dt_write_particle_data
1151	output_format = ''
1152	IF ( netcdf_output ) THEN
1153	IF ( netcdf_64bit ) THEN
1154	output_format = 'netcdf (64 bit offset) and binary'
1155	ELSE
1156	output_format = 'netcdf and binary'
1157	ENDIF
1158	ELSE
1159	output_format = 'binary'
1160	ENDIF
1161	WRITE ( io, 345 ) output_format
1162	ENDIF
1163	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
1164	IF ( write_particle_statistics ) WRITE ( io, 486 )
1165
1166	WRITE ( io, 487 ) number_of_particle_groups
1167
1168	DO i = 1, number_of_particle_groups
1169	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
1170	WRITE ( io, 490 ) i, 0.0
1171	WRITE ( io, 492 )
1172	ELSE
1173	WRITE ( io, 490 ) i, radius(i)
1174	IF ( density_ratio(i) /= 0.0 ) THEN
1175	WRITE ( io, 491 ) density_ratio(i)
1176	ELSE
1177	WRITE ( io, 492 )
1178	ENDIF
1179	ENDIF
1180	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
1181	pdx(i), pdy(i), pdz(i)
1182	ENDDO
1183
1184	ENDIF
1185
1186
1187	!
1188	!-- Parameters of 1D-model
1189	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
1190	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
1191	mixing_length_1d, dissipation_1d
1192	IF ( damp_level_ind_1d /= nzt+1 ) THEN
1193	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
1194	ENDIF
1195	ENDIF
1196
1197	!
1198	!-- User-defined informations
1199	CALL user_header( io )
1200
1201	WRITE ( io, 99 )
1202
1203	!
1204	!-- Write buffer contents to disc immediately
1205	CALL local_flush( io )
1206
1207	!
1208	!-- Here the FORMATs start
1209
1210	99 FORMAT (1X,78('-'))
1211	100 FORMAT (/1X,'*************************',11X,42('-')/ &
1212	1X,'* ',A,' *',11X,A/ &
1213	1X,'*************************',11X,42('-'))
1214	101 FORMAT (37X,'coupled run: ',A/ &
1215	37X,42('-'))
1216	102 FORMAT (/' Date: ',A8,11X,'Run: ',A20/ &
1217	' Time: ',A8,11X,'Run-No.: ',I2.2/ &
1218	' Run on host: ',A10)
1219	#if defined( __parallel )
1220	103 FORMAT (' Number of PEs:',7X,I4,11X,'Processor grid (x,y): (',I3,',',I3, &
1221	')',1X,A)
1222	104 FORMAT (' Number of PEs:',7X,I4,11X,'Tasks:',I4,' threads per task:',I4/ &
1223	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
1224	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
1225	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
1226	37X,'because the job is running on an SMP-cluster')
1227	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
1228	#endif
1229	110 FORMAT (/' Numerical Schemes:'/ &
1230	' -----------------'/)
1231	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
1232	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
1233	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
1234	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
1235	' or Upstream')
1236	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
1237	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
1238	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
1239	' or Upstream')
1240	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
1241	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
1242	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
1243	' Translation velocity = ',A/ &
1244	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
1245	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
1246	' of timestep changes)')
1247	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
1248	' timestep changes')
1249	122 FORMAT (' --> Time differencing scheme: ',A)
1250	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
1251	' maximum damping coefficient: ',F5.3, ' 1/s')
1252	124 FORMAT (' Spline-overshoots are being suppressed')
1253	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1254	' of'/ &
1255	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1256	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
1257	' of'/ &
1258	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1259	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1260	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
1261	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
1262	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
1263	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
1264	130 FORMAT (' --> Additional prognostic equation for the total water content')
1265	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
1266	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
1267	' effective emissivity scheme')
1268	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
1269	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
1270	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
1271	A,'-cycle)'/ &
1272	' number of grid levels: ',I2/ &
1273	' Gauss-Seidel red/black iterations: ',I2)
1274	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1275	I3,')')
1276	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
1277	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
1278	I3,')'/ &
1279	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
1280	I3,')')
1281	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
1282	139 FORMAT (' --> Loop optimization method: ',A)
1283	140 FORMAT (' maximum residual allowed: ',E10.3)
1284	141 FORMAT (' fixed number of multigrid cycles: ',I4)
1285	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
1286	'step')
1287	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
1288	'kinetic energy')
1289	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
1290	'conserved')
1291	200 FORMAT (//' Run time and time step information:'/ &
1292	' ----------------------------------'/)
1293	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
1294	' CFL-factor: ',F4.2)
1295	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
1296	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
1297	' End time: ',F9.3,' s')
1298	204 FORMAT ( A,F9.3,' s')
1299	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
1300	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
1301	' CPU-time used: ',F9.3,' s per timestep: ', &
1302	' ',F9.3,' s'/ &
1303	' per second of simulated tim', &
1304	'e: ',F9.3,' s')
1305	250 FORMAT (//' Computational grid and domain size:'/ &
1306	' ----------------------------------'// &
1307	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
1308	' m dz = ',F7.3,' m'/ &
1309	' Domain size: x = ',F10.3,' m y = ',F10.3, &
1310	' m z(u) = ',F10.3,' m'/)
1311	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
1312	' factor: ',F5.3/ &
1313	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
1314	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
1315	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
1316	255 FORMAT (' Subdomains have equal size')
1317	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
1318	'have smaller sizes'/ &
1319	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
1320	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
1321	' degrees')
1322	270 FORMAT (//' Topography informations:'/ &
1323	' -----------------------'// &
1324	1X,'Topography: ',A)
1325	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
1326	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
1327	' / ',I4)
1328	300 FORMAT (//' Boundary conditions:'/ &
1329	' -------------------'// &
1330	' p uv ', &
1331	' pt'// &
1332	' B. bound.: ',A/ &
1333	' T. bound.: ',A)
1334	301 FORMAT (/' ',A// &
1335	' B. bound.: ',A/ &
1336	' T. bound.: ',A)
1337	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
1338	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
1339	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
1340	'computational u,v-level:'// &
1341	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
1342	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1343	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
1344	307 FORMAT (' Heatflux has a random normal distribution')
1345	308 FORMAT (' Predefined surface temperature')
1346	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
1347	310 FORMAT (//' 1D-Model:'// &
1348	' Rif value range: ',F6.2,' <= rif <=',F6.2)
1349	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
1350	312 FORMAT (' Predefined surface humidity')
1351	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
1352	314 FORMAT (' Predefined scalar value at the surface')
1353	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
1354	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
1355	'atmosphere model')
1356	317 FORMAT (//' Lateral boundaries:'/ &
1357	' left/right: ',A/ &
1358	' north/south: ',A)
1359	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
1360	'max =',F5.1,' m**2/s')
1361	319 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
1362	' v: ',F9.6,' m2/s2')
1363	320 FORMAT (//' List output:'/ &
1364	' -----------'// &
1365	' 1D-Profiles:'/ &
1366	' Output every ',F8.2,' s')
1367	321 FORMAT (' Time averaged over ',F8.2,' s'/ &
1368	' Averaging input every ',F8.2,' s')
1369	330 FORMAT (//' Data output:'/ &
1370	' -----------'/)
1371	331 FORMAT (/' 1D-Profiles:')
1372	332 FORMAT (/' ',A)
1373	333 FORMAT (' Output every ',F8.2,' s',/ &
1374	' Time averaged over ',F8.2,' s'/ &
1375	' Averaging input every ',F8.2,' s')
1376	334 FORMAT (/' 2D-Arrays',A,':')
1377	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1378	' Output every ',F8.2,' s ',A/ &
1379	' Cross sections at ',A1,' = ',A/ &
1380	' scalar-coordinates: ',A,' m'/)
1381	336 FORMAT (/' 3D-Arrays',A,':')
1382	337 FORMAT (/' Arrays: ',A/ &
1383	' Output every ',F8.2,' s ',A/ &
1384	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1385	338 FORMAT (' Compressed data output'/ &
1386	' Decimal precision: ',A/)
1387	339 FORMAT (' No output during initial ',F8.2,' s')
1388	340 FORMAT (/' Time series:')
1389	341 FORMAT (' Output every ',F8.2,' s'/)
1390	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
1391	' Output every ',F8.2,' s ',A/ &
1392	' Time averaged over ',F8.2,' s'/ &
1393	' Averaging input every ',F8.2,' s'/ &
1394	' Cross sections at ',A1,' = ',A/ &
1395	' scalar-coordinates: ',A,' m'/)
1396	343 FORMAT (/' Arrays: ',A/ &
1397	' Output every ',F8.2,' s ',A/ &
1398	' Time averaged over ',F8.2,' s'/ &
1399	' Averaging input every ',F8.2,' s'/ &
1400	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
1401	345 FORMAT (' Output format: ',A/)
1402	#if defined( __dvrp_graphics )
1403	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
1404	' Output every ',F7.1,' s'/ &
1405	' Output mode: ',A/ &
1406	' Host / User: ',A,' / ',A/ &
1407	' Directory: ',A// &
1408	' The sequence contains:')
1409	361 FORMAT (' Isosurface of ',A,' Threshold value: ', E12.3)
1410	362 FORMAT (' Sectional plane ',A)
1411	363 FORMAT (' Particles')
1412	#endif
1413	#if defined( __spectra )
1414	370 FORMAT (' Spectra:')
1415	371 FORMAT (' Output every ',F7.1,' s'/)
1416	372 FORMAT (' Arrays: ', 10(A5,',')/ &
1417	' Directions: ', 10(A5,',')/ &
1418	' height levels k = ', 9(I3,','),I3,'.'/ &
1419	' height levels selected for standard plot:'/ &
1420	' k = ', 9(I3,','),I3,'.'/ &
1421	' Time averaged over ', F7.1, ' s,' / &
1422	' Profiles for the time averaging are taken every ', &
1423	F6.1,' s')
1424	#endif
1425	400 FORMAT (//' Physical quantities:'/ &
1426	' -------------------'/)
1427	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
1428	' Geograph. latitude : phi = ',F4.1,' degr'/ &
1429	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
1430	' f* = ',F9.6,' 1/s')
1431	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
1432	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
1433	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
1434	415 FORMAT (/' Cloud physics parameters:'/ &
1435	' ------------------------'/)
1436	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
1437	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
1438	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
1439	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
1440	' Vapourization heat : L_v = ',E8.2,' J/kg')
1441	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
1442	' Height: ',A,' m'/ &
1443	' Temperature: ',A,' K'/ &
1444	' Gradient: ',A,' K/100m'/ &
1445	' Gridpoint: ',A)
1446	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
1447	' Height: ',A,' m'/ &
1448	' Humidity: ',A,' kg/kg'/ &
1449	' Gradient: ',A,' (kg/kg)/100m'/ &
1450	' Gridpoint: ',A)
1451	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
1452	' Height: ',A,' m'/ &
1453	' Scalar concentration: ',A,' kg/m**3'/ &
1454	' Gradient: ',A,' (kg/m**3)/100m'/ &
1455	' Gridpoint: ',A)
1456	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
1457	' Height: ',A,' m'/ &
1458	' ug: ',A,' m/s'/ &
1459	' Gradient: ',A,' 1/100s'/ &
1460	' Gridpoint: ',A)
1461	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
1462	' Height: ',A,' m'/ &
1463	' vg: ',A,' m/s'/ &
1464	' Gradient: ',A,' 1/100s'/ &
1465	' Gridpoint: ',A)
1466	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
1467	' Height: ',A,' m'/ &
1468	' Salinity: ',A,' psu'/ &
1469	' Gradient: ',A,' psu/100m'/ &
1470	' Gridpoint: ',A)
1471	450 FORMAT (//' LES / Turbulence quantities:'/ &
1472	' ---------------------------'/)
1473	451 FORMAT (' Diffusion coefficients are constant:'/ &
1474	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
1475	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
1476	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
1477	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
1478	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
1479	470 FORMAT (//' Actions during the simulation:'/ &
1480	' -----------------------------'/)
1481	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
1482	' Disturbance amplitude : ',F4.2, ' m/s'/ &
1483	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
1484	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
1485	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
1486	' to i/j =',I4)
1487	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
1488	1X,F5.3, ' m2/s2')
1489	474 FORMAT (' Random number generator used : ',A/)
1490	475 FORMAT (' The surface temperature is increased (or decreased, ', &
1491	'respectively, if'/ &
1492	' the value is negative) by ',F5.2,' K at the beginning of the',&
1493	' 3D-simulation'/)
1494	476 FORMAT (' The surface humidity is increased (or decreased, ',&
1495	'respectively, if the'/ &
1496	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
1497	' the 3D-simulation'/)
1498	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
1499	'respectively, if the'/ &
1500	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
1501	' the 3D-simulation'/)
1502	480 FORMAT (' Particles:'/ &
1503	' ---------'// &
1504	' Particle advection is active (switched on at t = ', F7.1, &
1505	' s)'/ &
1506	' Start of new particle generations every ',F6.1,' s'/ &
1507	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
1508	' bottom: ', A, ' top: ', A/&
1509	' Maximum particle age: ',F9.1,' s'/ &
1510	' Advection stopped at t = ',F9.1,' s'/)
1511	481 FORMAT (' Particles have random start positions'/)
1512	482 FORMAT (' Particles are advected only horizontally'/)
1513	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
1514	484 FORMAT (' Number of tails of the total domain: ',I10/ &
1515	' Minimum distance between tailpoints: ',F8.2,' m'/ &
1516	' Maximum age of the end of the tail: ',F8.2,' s')
1517	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
1518	486 FORMAT (' Particle statistics are written on file'/)
1519	487 FORMAT (' Number of particle groups: ',I2/)
1520	488 FORMAT (' SGS velocity components are used for particle advection'/ &
1521	' minimum timestep for advection: ', F7.5/)
1522	489 FORMAT (' Number of particles simultaneously released at each ', &
1523	'point: ', I5/)
1524	490 FORMAT (' Particle group ',I2,':'/ &
1525	' Particle radius: ',E10.3, 'm')
1526	491 FORMAT (' Particle inertia is activated'/ &
1527	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
1528	492 FORMAT (' Particles are advected only passively (no inertia)'/)
1529	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
1530	' y:',F8.1,' - ',F8.1,' m'/&
1531	' z:',F8.1,' - ',F8.1,' m'/&
1532	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
1533	' m dz = ',F8.1,' m'/)
1534	494 FORMAT (' Output of particle time series in NetCDF format every ', &
1535	F8.2,' s'/)
1536	495 FORMAT (' Number of particles in total domain: ',I10/)
1537	500 FORMAT (//' 1D-Model parameters:'/ &
1538	' -------------------'// &
1539	' Simulation time: ',F8.1,' s'/ &
1540	' Run-controll output every: ',F8.1,' s'/ &
1541	' Vertical profile output every: ',F8.1,' s'/ &
1542	' Mixing length calculation: ',A/ &
1543	' Dissipation calculation: ',A/)
1544	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
1545
1546
1547	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |