Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 958

Last change on this file since 958 was 941, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 80.1 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[941]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 941 2012-07-09 14:50:21Z hoffmann $
	11	!
[941]	12	! 940 2012-07-09 14:31:00Z raasch
	13	! Output in case of simulations for pure neutral stratification (no pt-equation
	14	! solved)
	15	!
[928]	16	! 927 2012-06-06 19:15:04Z raasch
	17	! output of masking_method for mg-solver
	18	!
[869]	19	! 868 2012-03-28 12:21:07Z raasch
	20	! translation velocity in Galilean transformation changed to 0.6 * ug
	21	!
[834]	22	! 833 2012-02-22 08:55:55Z maronga
	23	! Adjusted format for leaf area density
	24	!
[829]	25	! 828 2012-02-21 12:00:36Z raasch
	26	! output of dissipation_classes + radius_classes
	27	!
[826]	28	! 825 2012-02-19 03:03:44Z raasch
	29	! Output of cloud physics parameters/quantities complemented and restructured
	30	!
[768]	31	! 767 2011-10-14 06:39:12Z raasch
	32	! Output of given initial u,v-profiles
	33	!
[760]	34	! 759 2011-09-15 13:58:31Z raasch
	35	! output of maximum number of parallel io streams
	36	!
[708]	37	! 707 2011-03-29 11:39:40Z raasch
	38	! bc_lr/ns replaced by bc_lr/ns_cyc
	39	!
[668]	40	! 667 2010-12-23 12:06:00Z suehring/gryschka
	41	! Output of advection scheme.
	42	! Modified output of Prandtl-layer height.
	43	!
[581]	44	! 580 2010-10-05 13:59:11Z heinze
	45	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	46	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	47	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	48	!
[494]	49	! 493 2010-03-01 08:30:24Z raasch
	50	! NetCDF data output format extendend for NetCDF4/HDF5
	51	!
[482]	52	! 449 2010-02-02 11:23:59Z raasch
	53	! +large scale vertical motion (subsidence/ascent)
	54	! Bugfix: index problem concerning gradient_level indices removed
	55	!
[449]	56	! 410 2009-12-04 17:05:40Z letzel
	57	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	58	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	59	!
[392]	60	! 346 2009-07-06 10:13:41Z raasch
[328]	61	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	62	! Coupling with independent precursor runs.
[254]	63	! Output of messages replaced by message handling routine.
[336]	64	! Output of several additional dvr parameters
[240]	65	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	66	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	67	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	68	! topography_grid_convention moved from user_header
[292]	69	! small bugfix concerning 3d 64bit netcdf output format
[1]	70	!
[226]	71	! 206 2008-10-13 14:59:11Z raasch
	72	! Bugfix: error in zu index in case of section_xy = -1
	73	!
[200]	74	! 198 2008-09-17 08:55:28Z raasch
	75	! Format adjustments allowing output of larger revision numbers
	76	!
[198]	77	! 197 2008-09-16 15:29:03Z raasch
	78	! allow 100 spectra levels instead of 10 for consistency with
	79	! define_netcdf_header,
	80	! bugfix in the output of the characteristic levels of potential temperature,
	81	! geostrophic wind, scalar concentration, humidity and leaf area density,
	82	! output of turbulence recycling informations
	83	!
[139]	84	! 138 2007-11-28 10:03:58Z letzel
	85	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	86	! Allow two instead of one digit to specify isosurface and slicer variables.
	87	! Output of sorting frequency of particles
	88	!
[110]	89	! 108 2007-08-24 15:10:38Z letzel
	90	! Output of informations for coupled model runs (boundary conditions etc.)
	91	! + output of momentumfluxes at the top boundary
	92	! Rayleigh damping for ocean, e_init
	93	!
[98]	94	! 97 2007-06-21 08:23:15Z raasch
	95	! Adjustments for the ocean version.
	96	! use_pt_reference renamed use_reference
	97	!
[90]	98	! 87 2007-05-22 15:46:47Z raasch
	99	! Bugfix: output of use_upstream_for_tke
	100	!
[83]	101	! 82 2007-04-16 15:40:52Z raasch
	102	! Preprocessor strings for different linux clusters changed to "lc",
	103	! routine local_flush is used for buffer flushing
	104	!
[77]	105	! 76 2007-03-29 00:58:32Z raasch
	106	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	107	! output of the loop optimization method, moisture renamed humidity,
	108	! output of subversion revision number
	109	!
[39]	110	! 19 2007-02-23 04:53:48Z raasch
	111	! Output of scalar flux applied at top boundary
	112	!
[3]	113	! RCS Log replace by Id keyword, revision history cleaned up
	114	!
[1]	115	! Revision 1.63 2006/08/22 13:53:13 raasch
	116	! Output of dz_max
	117	!
	118	! Revision 1.1 1997/08/11 06:17:20 raasch
	119	! Initial revision
	120	!
	121	!
	122	! Description:
	123	! ------------
	124	! Writing a header with all important informations about the actual run.
	125	! This subroutine is called three times, two times at the beginning
	126	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	127	! end of the run, then writing additional information about CPU-usage on file
	128	! header.
[411]	129	!-----------------------------------------------------------------------------!
[1]	130
	131	USE arrays_3d
	132	USE control_parameters
	133	USE cloud_parameters
	134	USE cpulog
	135	USE dvrp_variables
	136	USE grid_variables
	137	USE indices
	138	USE model_1d
	139	USE particle_attributes
	140	USE pegrid
[411]	141	USE subsidence_mod
[1]	142	USE spectrum
	143
	144	IMPLICIT NONE
	145
	146	CHARACTER (LEN=1) :: prec
	147	CHARACTER (LEN=2) :: do2d_mode
	148	CHARACTER (LEN=5) :: section_chr
	149	CHARACTER (LEN=9) :: time_to_string
	150	CHARACTER (LEN=10) :: coor_chr, host_chr
	151	CHARACTER (LEN=16) :: begin_chr
[200]	152	CHARACTER (LEN=23) :: ver_rev
[1]	153	CHARACTER (LEN=40) :: output_format
[167]	154	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	155	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	156	domask_chr, run_classification
[167]	157	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	158	temperatures, ugcomponent, vgcomponent
[1]	159	CHARACTER (LEN=85) :: roben, runten
	160
[410]	161	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	162
	163	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	164	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	165	REAL :: cpuseconds_per_simulated_second
	166
	167	!
	168	!-- Open the output file. At the end of the simulation, output is directed
	169	!-- to unit 19.
	170	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	171	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	172	io = 15 ! header output on file RUN_CONTROL
	173	ELSE
	174	io = 19 ! header output on file HEADER
	175	ENDIF
	176	CALL check_open( io )
	177
	178	!
	179	!-- At the end of the run, output file (HEADER) will be rewritten with
	180	!-- new informations
	181	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	182
	183	!
	184	!-- Determine kind of model run
	185	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	186	run_classification = '3D - restart run'
[328]	187	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	188	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	189	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	190	run_classification = '3D - run without 1D - prerun'
[197]	191	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	192	run_classification = '3D - run with 1D - prerun'
[197]	193	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	194	run_classification = '3D - run initialized by user'
[1]	195	ELSE
[254]	196	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	197	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	198	ENDIF
[97]	199	IF ( ocean ) THEN
	200	run_classification = 'ocean - ' // run_classification
	201	ELSE
	202	run_classification = 'atmosphere - ' // run_classification
	203	ENDIF
[1]	204
	205	!
	206	!-- Run-identification, date, time, host
	207	host_chr = host(1:10)
[75]	208	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	209	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	210	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	211	#if defined( __mpi2 )
	212	mpi_type = 2
	213	#else
	214	mpi_type = 1
	215	#endif
	216	WRITE ( io, 101 ) mpi_type, coupling_mode
	217	ENDIF
[102]	218	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	219	ADJUSTR( host_chr )
[1]	220	#if defined( __parallel )
	221	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	222	char1 = 'calculated'
	223	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	224	host(1:2) == 'lc' ) .AND. &
	225	npex == -1 .AND. pdims(2) == 1 ) THEN
	226	char1 = 'forced'
	227	ELSE
	228	char1 = 'predefined'
	229	ENDIF
	230	IF ( threads_per_task == 1 ) THEN
[102]	231	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	232	ELSE
[102]	233	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	234	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	235	ENDIF
	236	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	237	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	238	npex == -1 .AND. pdims(2) == 1 ) &
	239	THEN
[102]	240	WRITE ( io, 106 )
[1]	241	ELSEIF ( pdims(2) == 1 ) THEN
[102]	242	WRITE ( io, 107 ) 'x'
[1]	243	ELSEIF ( pdims(1) == 1 ) THEN
[102]	244	WRITE ( io, 107 ) 'y'
[1]	245	ENDIF
[102]	246	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	247	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	248	WRITE ( io, 108 ) maximum_parallel_io_streams
	249	ENDIF
[1]	250	#endif
	251	WRITE ( io, 99 )
	252
	253	!
	254	!-- Numerical schemes
	255	WRITE ( io, 110 )
	256	IF ( psolver(1:7) == 'poisfft' ) THEN
	257	WRITE ( io, 111 ) TRIM( fft_method )
	258	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	259	ELSEIF ( psolver == 'sor' ) THEN
	260	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	261	ELSEIF ( psolver == 'multigrid' ) THEN
	262	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	263	IF ( mg_cycles == -1 ) THEN
	264	WRITE ( io, 140 ) residual_limit
	265	ELSE
	266	WRITE ( io, 141 ) mg_cycles
	267	ENDIF
	268	IF ( mg_switch_to_pe0_level == 0 ) THEN
	269	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	270	nzt_mg(1)
[197]	271	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	272	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	273	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	274	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	275	nzt_mg(mg_switch_to_pe0_level), &
	276	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	277	nzt_mg(1)
	278	ENDIF
[927]	279	IF ( masking_method ) WRITE ( io, 144 )
[1]	280	ENDIF
	281	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	282	THEN
	283	WRITE ( io, 142 )
	284	ENDIF
	285
	286	IF ( momentum_advec == 'pw-scheme' ) THEN
	287	WRITE ( io, 113 )
[667]	288	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	289	WRITE ( io, 503 )
	290	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	291	WRITE ( io, 114 )
	292	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	293	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	294	overshoot_limit_w /= 0.0 ) THEN
	295	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	296	overshoot_limit_w
	297	ENDIF
	298	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	299	ups_limit_w /= 0.0 ) &
	300	THEN
	301	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	302	ENDIF
	303	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	304	ENDIF
	305	IF ( scalar_advec == 'pw-scheme' ) THEN
	306	WRITE ( io, 116 )
[667]	307	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	308	WRITE ( io, 504 )
[1]	309	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	310	WRITE ( io, 117 )
	311	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	312	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	313	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	314	ENDIF
	315	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	316	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	317	ENDIF
	318	ELSE
	319	WRITE ( io, 118 )
	320	ENDIF
[63]	321
	322	WRITE ( io, 139 ) TRIM( loop_optimization )
	323
[1]	324	IF ( galilei_transformation ) THEN
	325	IF ( use_ug_for_galilei_tr ) THEN
[868]	326	char1 = '0.6 * geostrophic wind'
[1]	327	ELSE
	328	char1 = 'mean wind in model domain'
	329	ENDIF
	330	IF ( simulated_time_at_begin == simulated_time ) THEN
	331	char2 = 'at the start of the run'
	332	ELSE
	333	char2 = 'at the end of the run'
	334	ENDIF
	335	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	336	advected_distance_x/1000.0, advected_distance_y/1000.0
	337	ENDIF
	338	IF ( timestep_scheme == 'leapfrog' ) THEN
	339	WRITE ( io, 120 )
	340	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	341	WRITE ( io, 121 )
	342	ELSE
	343	WRITE ( io, 122 ) timestep_scheme
	344	ENDIF
[87]	345	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	346	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	347	IF ( .NOT. ocean ) THEN
	348	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	349	rayleigh_damping_factor
	350	ELSE
	351	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	352	rayleigh_damping_factor
	353	ENDIF
[1]	354	ENDIF
[940]	355	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	356	IF ( humidity ) THEN
[1]	357	IF ( .NOT. cloud_physics ) THEN
	358	WRITE ( io, 129 )
	359	ELSE
	360	WRITE ( io, 130 )
	361	ENDIF
	362	ENDIF
	363	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	364	IF ( conserve_volume_flow ) THEN
[241]	365	WRITE ( io, 150 ) conserve_volume_flow_mode
	366	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	367	WRITE ( io, 151 ) u_bulk, v_bulk
	368	ENDIF
[240]	369	ELSEIF ( dp_external ) THEN
	370	IF ( dp_smooth ) THEN
[241]	371	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	372	ELSE
[241]	373	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	374	ENDIF
	375	ENDIF
[411]	376	IF ( large_scale_subsidence ) THEN
	377	WRITE ( io, 153 )
	378	WRITE ( io, 154 )
	379	ENDIF
[1]	380	WRITE ( io, 99 )
	381
	382	!
	383	!-- Runtime and timestep informations
	384	WRITE ( io, 200 )
	385	IF ( .NOT. dt_fixed ) THEN
	386	WRITE ( io, 201 ) dt_max, cfl_factor
	387	ELSE
	388	WRITE ( io, 202 ) dt
	389	ENDIF
	390	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	391
	392	IF ( time_restart /= 9999999.9 .AND. &
	393	simulated_time_at_begin == simulated_time ) THEN
	394	IF ( dt_restart == 9999999.9 ) THEN
	395	WRITE ( io, 204 ) ' Restart at: ',time_restart
	396	ELSE
	397	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	398	ENDIF
	399	ENDIF
	400
	401	IF ( simulated_time_at_begin /= simulated_time ) THEN
	402	i = MAX ( log_point_s(10)%counts, 1 )
	403	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	404	cpuseconds_per_simulated_second = 0.0
	405	ELSE
	406	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	407	( simulated_time - &
	408	simulated_time_at_begin )
	409	ENDIF
	410	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	411	log_point_s(10)%sum / REAL( i ), &
	412	cpuseconds_per_simulated_second
	413	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	414	IF ( dt_restart == 9999999.9 ) THEN
	415	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	416	ELSE
	417	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	418	ENDIF
	419	ENDIF
	420	ENDIF
	421
	422	!
[291]	423	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	424	!-- and ocean are used. In this case, coupling_start_time defines the time
	425	!-- when the coupling is switched on.
	426	IF ( coupling_start_time /= 0.0 ) THEN
	427	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	428	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	429	ELSE
	430	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	431	'precursor runs'
	432	ENDIF
	433	WRITE ( io, 207 ) char1, coupling_start_time
	434	ENDIF
	435
	436	!
[1]	437	!-- Computational grid
[94]	438	IF ( .NOT. ocean ) THEN
	439	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	440	IF ( dz_stretch_level_index < nzt+1 ) THEN
	441	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	442	dz_stretch_factor, dz_max
	443	ENDIF
	444	ELSE
	445	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	446	IF ( dz_stretch_level_index > 0 ) THEN
	447	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	448	dz_stretch_factor, dz_max
	449	ENDIF
[1]	450	ENDIF
	451	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	452	MIN( nnz+2, nzt+2 )
[76]	453	IF ( numprocs > 1 ) THEN
	454	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	455	WRITE ( io, 255 )
	456	ELSE
	457	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	458	ENDIF
[1]	459	ENDIF
	460	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	461
	462	!
	463	!-- Topography
	464	WRITE ( io, 270 ) topography
	465	SELECT CASE ( TRIM( topography ) )
	466
	467	CASE ( 'flat' )
	468	! no actions necessary
	469
	470	CASE ( 'single_building' )
	471	blx = INT( building_length_x / dx )
	472	bly = INT( building_length_y / dy )
	473	bh = INT( building_height / dz )
	474
	475	IF ( building_wall_left == 9999999.9 ) THEN
	476	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	477	ENDIF
	478	bxl = INT ( building_wall_left / dx + 0.5 )
	479	bxr = bxl + blx
	480
	481	IF ( building_wall_south == 9999999.9 ) THEN
	482	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	483	ENDIF
	484	bys = INT ( building_wall_south / dy + 0.5 )
	485	byn = bys + bly
	486
	487	WRITE ( io, 271 ) building_length_x, building_length_y, &
	488	building_height, bxl, bxr, bys, byn
	489
[240]	490	CASE ( 'single_street_canyon' )
	491	ch = NINT( canyon_height / dz )
	492	IF ( canyon_width_x /= 9999999.9 ) THEN
	493	!
	494	!-- Street canyon in y direction
	495	cwx = NINT( canyon_width_x / dx )
	496	IF ( canyon_wall_left == 9999999.9 ) THEN
	497	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	498	ENDIF
	499	cxl = NINT( canyon_wall_left / dx )
	500	cxr = cxl + cwx
	501	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	502
	503	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	504	!
	505	!-- Street canyon in x direction
	506	cwy = NINT( canyon_width_y / dy )
	507	IF ( canyon_wall_south == 9999999.9 ) THEN
	508	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	509	ENDIF
	510	cys = NINT( canyon_wall_south / dy )
	511	cyn = cys + cwy
	512	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	513	ENDIF
	514
[1]	515	END SELECT
	516
[256]	517	IF ( TRIM( topography ) /= 'flat' ) THEN
	518	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	519	IF ( TRIM( topography ) == 'single_building' .OR. &
	520	TRIM( topography ) == 'single_street_canyon' ) THEN
	521	WRITE ( io, 278 )
	522	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	523	WRITE ( io, 279 )
	524	ENDIF
	525	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	526	WRITE ( io, 278 )
	527	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	528	WRITE ( io, 279 )
	529	ENDIF
	530	ENDIF
	531
[138]	532	IF ( plant_canopy ) THEN
	533
	534	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	535	IF ( passive_scalar ) THEN
	536	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	537	leaf_surface_concentration
	538	ENDIF
[138]	539
[1]	540	!
[153]	541	!-- Heat flux at the top of vegetation
	542	WRITE ( io, 282 ) cthf
	543
	544	!
[138]	545	!-- Leaf area density profile
	546	!-- Building output strings, starting with surface value
[833]	547	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	548	gradients = '------'
	549	slices = ' 0'
	550	coordinates = ' 0.0'
	551	i = 1
	552	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	553
	554	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	555	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	556
	557	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	558	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	559
	560	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	561	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	562
	563	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	564	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	565
	566	i = i + 1
	567	ENDDO
	568
[153]	569	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	570	TRIM( gradients ), TRIM( slices )
	571
	572	ENDIF
	573
	574	!
[1]	575	!-- Boundary conditions
	576	IF ( ibc_p_b == 0 ) THEN
	577	runten = 'p(0) = 0 \|'
	578	ELSEIF ( ibc_p_b == 1 ) THEN
	579	runten = 'p(0) = p(1) \|'
	580	ELSE
	581	runten = 'p(0) = p(1) +R\|'
	582	ENDIF
	583	IF ( ibc_p_t == 0 ) THEN
	584	roben = 'p(nzt+1) = 0 \|'
	585	ELSE
	586	roben = 'p(nzt+1) = p(nzt) \|'
	587	ENDIF
	588
	589	IF ( ibc_uv_b == 0 ) THEN
	590	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	591	ELSE
	592	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	593	ENDIF
[132]	594	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	595	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	596	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	597	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	598	ELSE
	599	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	600	ENDIF
	601
	602	IF ( ibc_pt_b == 0 ) THEN
	603	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	604	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	605	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	606	ELSEIF ( ibc_pt_b == 2 ) THEN
	607	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	608	ENDIF
	609	IF ( ibc_pt_t == 0 ) THEN
[19]	610	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	611	ELSEIF( ibc_pt_t == 1 ) THEN
	612	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	613	ELSEIF( ibc_pt_t == 2 ) THEN
	614	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	615
[1]	616	ENDIF
	617
	618	WRITE ( io, 300 ) runten, roben
	619
	620	IF ( .NOT. constant_diffusion ) THEN
	621	IF ( ibc_e_b == 1 ) THEN
	622	runten = 'e(0) = e(1)'
	623	ELSE
	624	runten = 'e(0) = e(1) = (u/0.1)*2'
	625	ENDIF
	626	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	627
[97]	628	WRITE ( io, 301 ) 'e', runten, roben
[1]	629
	630	ENDIF
	631
[97]	632	IF ( ocean ) THEN
	633	runten = 'sa(0) = sa(1)'
	634	IF ( ibc_sa_t == 0 ) THEN
	635	roben = 'sa(nzt+1) = sa_surface'
[1]	636	ELSE
[97]	637	roben = 'sa(nzt+1) = sa(nzt)'
[1]	638	ENDIF
[97]	639	WRITE ( io, 301 ) 'sa', runten, roben
	640	ENDIF
[1]	641
[97]	642	IF ( humidity ) THEN
	643	IF ( ibc_q_b == 0 ) THEN
	644	runten = 'q(0) = q_surface'
	645	ELSE
	646	runten = 'q(0) = q(1)'
	647	ENDIF
	648	IF ( ibc_q_t == 0 ) THEN
	649	roben = 'q(nzt) = q_top'
	650	ELSE
	651	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	652	ENDIF
	653	WRITE ( io, 301 ) 'q', runten, roben
	654	ENDIF
[1]	655
[97]	656	IF ( passive_scalar ) THEN
	657	IF ( ibc_q_b == 0 ) THEN
	658	runten = 's(0) = s_surface'
	659	ELSE
	660	runten = 's(0) = s(1)'
	661	ENDIF
	662	IF ( ibc_q_t == 0 ) THEN
	663	roben = 's(nzt) = s_top'
	664	ELSE
	665	roben = 's(nzt) = s(nzt-1) + ds/dz'
	666	ENDIF
	667	WRITE ( io, 301 ) 's', runten, roben
[1]	668	ENDIF
	669
	670	IF ( use_surface_fluxes ) THEN
	671	WRITE ( io, 303 )
	672	IF ( constant_heatflux ) THEN
	673	WRITE ( io, 306 ) surface_heatflux
	674	IF ( random_heatflux ) WRITE ( io, 307 )
	675	ENDIF
[75]	676	IF ( humidity .AND. constant_waterflux ) THEN
[1]	677	WRITE ( io, 311 ) surface_waterflux
	678	ENDIF
	679	IF ( passive_scalar .AND. constant_waterflux ) THEN
	680	WRITE ( io, 313 ) surface_waterflux
	681	ENDIF
	682	ENDIF
	683
[19]	684	IF ( use_top_fluxes ) THEN
	685	WRITE ( io, 304 )
[102]	686	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	687	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	688	IF ( constant_top_heatflux ) THEN
	689	WRITE ( io, 306 ) top_heatflux
	690	ENDIF
	691	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	692	WRITE ( io, 316 )
[19]	693	ENDIF
[97]	694	IF ( ocean .AND. constant_top_salinityflux ) THEN
	695	WRITE ( io, 309 ) top_salinityflux
	696	ENDIF
[75]	697	IF ( humidity .OR. passive_scalar ) THEN
[19]	698	WRITE ( io, 315 )
	699	ENDIF
	700	ENDIF
	701
[1]	702	IF ( prandtl_layer ) THEN
[667]	703	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	704	rif_min, rif_max
[1]	705	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	706	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	707	WRITE ( io, 312 )
	708	ENDIF
	709	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	710	WRITE ( io, 314 )
	711	ENDIF
	712	ELSE
	713	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	714	WRITE ( io, 310 ) rif_min, rif_max
	715	ENDIF
	716	ENDIF
	717
	718	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	719	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	720	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	721	IF ( turbulent_inflow ) THEN
	722	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	723	inflow_damping_height, inflow_damping_width
	724	ENDIF
[1]	725	ENDIF
	726
	727	!
	728	!-- Listing of 1D-profiles
[151]	729	WRITE ( io, 325 ) dt_dopr_listing
[1]	730	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	731	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	732	ENDIF
	733
	734	!
	735	!-- DATA output
	736	WRITE ( io, 330 )
	737	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	738	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	739	ENDIF
	740
	741	!
	742	!-- 1D-profiles
[346]	743	dopr_chr = 'Profile:'
[1]	744	IF ( dopr_n /= 0 ) THEN
	745	WRITE ( io, 331 )
	746
	747	output_format = ''
	748	IF ( netcdf_output ) THEN
[493]	749	IF ( netcdf_data_format == 1 ) THEN
	750	output_format = 'NetCDF classic'
[1]	751	ELSE
[493]	752	output_format = 'NetCDF 64bit offset'
[1]	753	ENDIF
	754	ENDIF
	755	IF ( profil_output ) THEN
	756	IF ( netcdf_output ) THEN
	757	output_format = TRIM( output_format ) // ' and profil'
	758	ELSE
	759	output_format = 'profil'
	760	ENDIF
	761	ENDIF
[292]	762	WRITE ( io, 344 ) output_format
[1]	763
	764	DO i = 1, dopr_n
	765	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	766	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	767	WRITE ( io, 332 ) dopr_chr
	768	dopr_chr = ' :'
	769	ENDIF
	770	ENDDO
	771
	772	IF ( dopr_chr /= '' ) THEN
	773	WRITE ( io, 332 ) dopr_chr
	774	ENDIF
	775	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	776	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	777	ENDIF
	778
	779	!
	780	!-- 2D-arrays
	781	DO av = 0, 1
	782
	783	i = 1
	784	do2d_xy = ''
	785	do2d_xz = ''
	786	do2d_yz = ''
	787	DO WHILE ( do2d(av,i) /= ' ' )
	788
	789	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	790	do2d_mode = do2d(av,i)(l-1:l)
	791
	792	SELECT CASE ( do2d_mode )
	793	CASE ( 'xy' )
	794	ll = LEN_TRIM( do2d_xy )
	795	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	796	CASE ( 'xz' )
	797	ll = LEN_TRIM( do2d_xz )
	798	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	799	CASE ( 'yz' )
	800	ll = LEN_TRIM( do2d_yz )
	801	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	802	END SELECT
	803
	804	i = i + 1
	805
	806	ENDDO
	807
	808	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	809	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	810	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	811	( netcdf_output .OR. iso2d_output ) ) THEN
	812
	813	IF ( av == 0 ) THEN
	814	WRITE ( io, 334 ) ''
	815	ELSE
	816	WRITE ( io, 334 ) '(time-averaged)'
	817	ENDIF
	818
	819	IF ( do2d_at_begin ) THEN
	820	begin_chr = 'and at the start'
	821	ELSE
	822	begin_chr = ''
	823	ENDIF
	824
	825	output_format = ''
	826	IF ( netcdf_output ) THEN
[493]	827	IF ( netcdf_data_format == 1 ) THEN
	828	output_format = 'NetCDF classic'
	829	ELSEIF ( netcdf_data_format == 2 ) THEN
	830	output_format = 'NetCDF 64bit offset'
	831	ELSEIF ( netcdf_data_format == 3 ) THEN
	832	output_format = 'NetCDF4/HDF5'
	833	ELSEIF ( netcdf_data_format == 4 ) THEN
	834	output_format = 'NetCDF4/HDF5 clasic'
[1]	835	ENDIF
	836	ENDIF
	837	IF ( iso2d_output ) THEN
	838	IF ( netcdf_output ) THEN
	839	output_format = TRIM( output_format ) // ' and iso2d'
	840	ELSE
	841	output_format = 'iso2d'
	842	ENDIF
	843	ENDIF
[292]	844	WRITE ( io, 344 ) output_format
[1]	845
	846	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	847	i = 1
	848	slices = '/'
	849	coordinates = '/'
	850	!
	851	!-- Building strings with index and coordinate informations of the
	852	!-- slices
	853	DO WHILE ( section(i,1) /= -9999 )
	854
	855	WRITE (section_chr,'(I5)') section(i,1)
	856	section_chr = ADJUSTL( section_chr )
	857	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	858
[206]	859	IF ( section(i,1) == -1 ) THEN
	860	WRITE (coor_chr,'(F10.1)') -1.0
	861	ELSE
	862	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	863	ENDIF
[1]	864	coor_chr = ADJUSTL( coor_chr )
	865	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	866
	867	i = i + 1
	868	ENDDO
	869	IF ( av == 0 ) THEN
	870	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	871	TRIM( begin_chr ), 'k', TRIM( slices ), &
	872	TRIM( coordinates )
	873	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	874	WRITE ( io, 339 ) skip_time_do2d_xy
	875	ENDIF
	876	ELSE
	877	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	878	TRIM( begin_chr ), averaging_interval, &
	879	dt_averaging_input, 'k', TRIM( slices ), &
	880	TRIM( coordinates )
	881	IF ( skip_time_data_output_av /= 0.0 ) THEN
	882	WRITE ( io, 339 ) skip_time_data_output_av
	883	ENDIF
	884	ENDIF
	885
	886	ENDIF
	887
	888	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	889	i = 1
	890	slices = '/'
	891	coordinates = '/'
	892	!
	893	!-- Building strings with index and coordinate informations of the
	894	!-- slices
	895	DO WHILE ( section(i,2) /= -9999 )
	896
	897	WRITE (section_chr,'(I5)') section(i,2)
	898	section_chr = ADJUSTL( section_chr )
	899	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	900
	901	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	902	coor_chr = ADJUSTL( coor_chr )
	903	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	904
	905	i = i + 1
	906	ENDDO
	907	IF ( av == 0 ) THEN
	908	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	909	TRIM( begin_chr ), 'j', TRIM( slices ), &
	910	TRIM( coordinates )
	911	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	912	WRITE ( io, 339 ) skip_time_do2d_xz
	913	ENDIF
	914	ELSE
	915	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	916	TRIM( begin_chr ), averaging_interval, &
	917	dt_averaging_input, 'j', TRIM( slices ), &
	918	TRIM( coordinates )
	919	IF ( skip_time_data_output_av /= 0.0 ) THEN
	920	WRITE ( io, 339 ) skip_time_data_output_av
	921	ENDIF
	922	ENDIF
	923	ENDIF
	924
	925	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	926	i = 1
	927	slices = '/'
	928	coordinates = '/'
	929	!
	930	!-- Building strings with index and coordinate informations of the
	931	!-- slices
	932	DO WHILE ( section(i,3) /= -9999 )
	933
	934	WRITE (section_chr,'(I5)') section(i,3)
	935	section_chr = ADJUSTL( section_chr )
	936	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	937
	938	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	939	coor_chr = ADJUSTL( coor_chr )
	940	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	941
	942	i = i + 1
	943	ENDDO
	944	IF ( av == 0 ) THEN
	945	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	946	TRIM( begin_chr ), 'i', TRIM( slices ), &
	947	TRIM( coordinates )
	948	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	949	WRITE ( io, 339 ) skip_time_do2d_yz
	950	ENDIF
	951	ELSE
	952	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	953	TRIM( begin_chr ), averaging_interval, &
	954	dt_averaging_input, 'i', TRIM( slices ), &
	955	TRIM( coordinates )
	956	IF ( skip_time_data_output_av /= 0.0 ) THEN
	957	WRITE ( io, 339 ) skip_time_data_output_av
	958	ENDIF
	959	ENDIF
	960	ENDIF
	961
	962	ENDIF
	963
	964	ENDDO
	965
	966	!
	967	!-- 3d-arrays
	968	DO av = 0, 1
	969
	970	i = 1
	971	do3d_chr = ''
	972	DO WHILE ( do3d(av,i) /= ' ' )
	973
	974	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	975	i = i + 1
	976
	977	ENDDO
	978
	979	IF ( do3d_chr /= '' ) THEN
	980	IF ( av == 0 ) THEN
	981	WRITE ( io, 336 ) ''
	982	ELSE
	983	WRITE ( io, 336 ) '(time-averaged)'
	984	ENDIF
	985
	986	output_format = ''
	987	IF ( netcdf_output ) THEN
[493]	988	IF ( netcdf_data_format == 1 ) THEN
	989	output_format = 'NetCDF classic'
	990	ELSEIF ( netcdf_data_format == 2 ) THEN
	991	output_format = 'NetCDF 64bit offset'
	992	ELSEIF ( netcdf_data_format == 3 ) THEN
	993	output_format = 'NetCDF4/HDF5'
	994	ELSEIF ( netcdf_data_format == 4 ) THEN
	995	output_format = 'NetCDF4/HDF5 clasic'
[1]	996	ENDIF
	997	ENDIF
	998	IF ( avs_output ) THEN
	999	IF ( netcdf_output ) THEN
	1000	output_format = TRIM( output_format ) // ' and avs'
	1001	ELSE
	1002	output_format = 'avs'
	1003	ENDIF
	1004	ENDIF
[292]	1005	WRITE ( io, 344 ) output_format
[1]	1006
	1007	IF ( do3d_at_begin ) THEN
	1008	begin_chr = 'and at the start'
	1009	ELSE
	1010	begin_chr = ''
	1011	ENDIF
	1012	IF ( av == 0 ) THEN
	1013	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1014	zu(nz_do3d), nz_do3d
	1015	ELSE
	1016	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1017	TRIM( begin_chr ), averaging_interval, &
	1018	dt_averaging_input, zu(nz_do3d), nz_do3d
	1019	ENDIF
	1020
	1021	IF ( do3d_compress ) THEN
	1022	do3d_chr = ''
	1023	i = 1
	1024	DO WHILE ( do3d(av,i) /= ' ' )
	1025
	1026	SELECT CASE ( do3d(av,i) )
	1027	CASE ( 'u' )
	1028	j = 1
	1029	CASE ( 'v' )
	1030	j = 2
	1031	CASE ( 'w' )
	1032	j = 3
	1033	CASE ( 'p' )
	1034	j = 4
	1035	CASE ( 'pt' )
	1036	j = 5
	1037	END SELECT
	1038	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1039	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1040	':' // prec // ','
	1041	i = i + 1
	1042
	1043	ENDDO
	1044	WRITE ( io, 338 ) do3d_chr
	1045
	1046	ENDIF
	1047
	1048	IF ( av == 0 ) THEN
	1049	IF ( skip_time_do3d /= 0.0 ) THEN
	1050	WRITE ( io, 339 ) skip_time_do3d
	1051	ENDIF
	1052	ELSE
	1053	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1054	WRITE ( io, 339 ) skip_time_data_output_av
	1055	ENDIF
	1056	ENDIF
	1057
	1058	ENDIF
	1059
	1060	ENDDO
	1061
	1062	!
[410]	1063	!-- masked arrays
	1064	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1065	mask_scale_x, mask_scale_y, mask_scale_z
	1066	DO mid = 1, masks
	1067	DO av = 0, 1
	1068
	1069	i = 1
	1070	domask_chr = ''
	1071	DO WHILE ( domask(mid,av,i) /= ' ' )
	1072	domask_chr = TRIM( domask_chr ) // ' ' // &
	1073	TRIM( domask(mid,av,i) ) // ','
	1074	i = i + 1
	1075	ENDDO
	1076
	1077	IF ( domask_chr /= '' ) THEN
	1078	IF ( av == 0 ) THEN
	1079	WRITE ( io, 346 ) '', mid
	1080	ELSE
	1081	WRITE ( io, 346 ) ' (time-averaged)', mid
	1082	ENDIF
	1083
	1084	output_format = ''
	1085	IF ( netcdf_output ) THEN
[493]	1086	IF ( netcdf_data_format == 1 ) THEN
	1087	output_format = 'NetCDF classic'
	1088	ELSEIF ( netcdf_data_format == 2 ) THEN
	1089	output_format = 'NetCDF 64bit offset'
	1090	ELSEIF ( netcdf_data_format == 3 ) THEN
	1091	output_format = 'NetCDF4/HDF5'
	1092	ELSEIF ( netcdf_data_format == 4 ) THEN
	1093	output_format = 'NetCDF4/HDF5 clasic'
	1094	ENDIF
[410]	1095	ENDIF
	1096	WRITE ( io, 344 ) output_format
	1097
	1098	IF ( av == 0 ) THEN
	1099	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1100	ELSE
	1101	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1102	averaging_interval, dt_averaging_input
	1103	ENDIF
	1104
	1105	IF ( av == 0 ) THEN
	1106	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1107	WRITE ( io, 339 ) skip_time_domask(mid)
	1108	ENDIF
	1109	ELSE
	1110	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1111	WRITE ( io, 339 ) skip_time_data_output_av
	1112	ENDIF
	1113	ENDIF
	1114	!
	1115	!-- output locations
	1116	DO dim = 1, 3
	1117	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1118	count = 0
	1119	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1120	count = count + 1
	1121	ENDDO
	1122	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1123	mask(mid,dim,:count)
	1124	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1125	mask_loop(mid,dim,2) < 0.0 .AND. &
	1126	mask_loop(mid,dim,3) == 0.0 ) THEN
	1127	WRITE ( io, 350 ) dir(dim), dir(dim)
	1128	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1129	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1130	mask_loop(mid,dim,1:2)
	1131	ELSE
	1132	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1133	mask_loop(mid,dim,1:3)
	1134	ENDIF
	1135	ENDDO
	1136	ENDIF
	1137
	1138	ENDDO
	1139	ENDDO
	1140
	1141	!
[1]	1142	!-- Timeseries
	1143	IF ( dt_dots /= 9999999.9 ) THEN
	1144	WRITE ( io, 340 )
	1145
	1146	output_format = ''
	1147	IF ( netcdf_output ) THEN
[493]	1148	IF ( netcdf_data_format == 1 ) THEN
	1149	output_format = 'NetCDF classic'
[1]	1150	ELSE
[493]	1151	output_format = 'NetCDF 64bit offset'
[1]	1152	ENDIF
	1153	ENDIF
	1154	IF ( profil_output ) THEN
	1155	IF ( netcdf_output ) THEN
	1156	output_format = TRIM( output_format ) // ' and profil'
	1157	ELSE
	1158	output_format = 'profil'
	1159	ENDIF
	1160	ENDIF
[292]	1161	WRITE ( io, 344 ) output_format
[1]	1162	WRITE ( io, 341 ) dt_dots
	1163	ENDIF
	1164
	1165	#if defined( __dvrp_graphics )
	1166	!
	1167	!-- Dvrp-output
	1168	IF ( dt_dvrp /= 9999999.9 ) THEN
	1169	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1170	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1171	i = 1
	1172	l = 0
[336]	1173	m = 0
[1]	1174	DO WHILE ( mode_dvrp(i) /= ' ' )
	1175	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1176	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1177	l = l + 1
	1178	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1179	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1180	isosurface_color(:,l)
[1]	1181	ENDIF
	1182	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1183	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1184	m = m + 1
	1185	IF ( do2d(0,j) /= ' ' ) THEN
	1186	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1187	slicer_range_limits_dvrp(:,m)
	1188	ENDIF
[1]	1189	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1190	WRITE ( io, 363 ) dvrp_psize
	1191	IF ( particle_dvrpsize /= 'none' ) THEN
	1192	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1193	dvrpsize_interval
	1194	ENDIF
	1195	IF ( particle_color /= 'none' ) THEN
	1196	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1197	color_interval
	1198	ENDIF
[1]	1199	ENDIF
	1200	i = i + 1
	1201	ENDDO
[237]	1202
[336]	1203	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1204	superelevation_y, superelevation, clip_dvrp_l, &
	1205	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1206
	1207	IF ( TRIM( topography ) /= 'flat' ) THEN
	1208	WRITE ( io, 366 ) topography_color
	1209	IF ( cluster_size > 1 ) THEN
	1210	WRITE ( io, 367 ) cluster_size
	1211	ENDIF
[237]	1212	ENDIF
	1213
[1]	1214	ENDIF
	1215	#endif
	1216
	1217	#if defined( __spectra )
	1218	!
	1219	!-- Spectra output
	1220	IF ( dt_dosp /= 9999999.9 ) THEN
	1221	WRITE ( io, 370 )
	1222
	1223	output_format = ''
	1224	IF ( netcdf_output ) THEN
[493]	1225	IF ( netcdf_data_format == 1 ) THEN
	1226	output_format = 'NetCDF classic'
[1]	1227	ELSE
[493]	1228	output_format = 'NetCDF 64bit offset'
[1]	1229	ENDIF
	1230	ENDIF
	1231	IF ( profil_output ) THEN
	1232	IF ( netcdf_output ) THEN
	1233	output_format = TRIM( output_format ) // ' and profil'
	1234	ELSE
	1235	output_format = 'profil'
	1236	ENDIF
	1237	ENDIF
[292]	1238	WRITE ( io, 344 ) output_format
[1]	1239	WRITE ( io, 371 ) dt_dosp
	1240	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1241	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1242	( spectra_direction(i), i = 1,10 ), &
[189]	1243	( comp_spectra_level(i), i = 1,100 ), &
	1244	( plot_spectra_level(i), i = 1,100 ), &
[1]	1245	averaging_interval_sp, dt_averaging_input_pr
	1246	ENDIF
	1247	#endif
	1248
	1249	WRITE ( io, 99 )
	1250
	1251	!
	1252	!-- Physical quantities
	1253	WRITE ( io, 400 )
	1254
	1255	!
	1256	!-- Geostrophic parameters
	1257	WRITE ( io, 410 ) omega, phi, f, fs
	1258
	1259	!
	1260	!-- Other quantities
	1261	WRITE ( io, 411 ) g
[97]	1262	IF ( use_reference ) THEN
	1263	IF ( ocean ) THEN
	1264	WRITE ( io, 412 ) prho_reference
	1265	ELSE
	1266	WRITE ( io, 413 ) pt_reference
	1267	ENDIF
	1268	ENDIF
[1]	1269
	1270	!
	1271	!-- Cloud physics parameters
	1272	IF ( cloud_physics ) THEN
[57]	1273	WRITE ( io, 415 )
	1274	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1275	ENDIF
	1276
	1277	!-- Profile of the geostrophic wind (component ug)
	1278	!-- Building output strings
	1279	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1280	gradients = '------'
	1281	slices = ' 0'
	1282	coordinates = ' 0.0'
	1283	i = 1
	1284	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1285
[167]	1286	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1287	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1288
[167]	1289	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1290	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1291
[167]	1292	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1293	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1294
[167]	1295	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1296	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1297
[430]	1298	IF ( i == 10 ) THEN
	1299	EXIT
	1300	ELSE
	1301	i = i + 1
	1302	ENDIF
	1303
[1]	1304	ENDDO
	1305
	1306	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1307	TRIM( gradients ), TRIM( slices )
	1308
	1309	!-- Profile of the geostrophic wind (component vg)
	1310	!-- Building output strings
	1311	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1312	gradients = '------'
	1313	slices = ' 0'
	1314	coordinates = ' 0.0'
	1315	i = 1
	1316	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1317
[167]	1318	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1319	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1320
[167]	1321	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1322	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1323
[167]	1324	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1325	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1326
[167]	1327	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1328	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1329
[430]	1330	IF ( i == 10 ) THEN
	1331	EXIT
	1332	ELSE
	1333	i = i + 1
	1334	ENDIF
	1335
[1]	1336	ENDDO
	1337
	1338	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1339	TRIM( gradients ), TRIM( slices )
	1340
	1341	!
[767]	1342	!-- Initial wind profiles
	1343	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1344
	1345	!
[1]	1346	!-- Initial temperature profile
	1347	!-- Building output strings, starting with surface temperature
	1348	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1349	gradients = '------'
	1350	slices = ' 0'
	1351	coordinates = ' 0.0'
	1352	i = 1
	1353	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1354
[94]	1355	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1356	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1357
[94]	1358	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1359	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1360
[94]	1361	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1362	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1363
[94]	1364	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1365	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1366
[430]	1367	IF ( i == 10 ) THEN
	1368	EXIT
	1369	ELSE
	1370	i = i + 1
	1371	ENDIF
	1372
[1]	1373	ENDDO
	1374
	1375	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1376	TRIM( gradients ), TRIM( slices )
	1377
	1378	!
	1379	!-- Initial humidity profile
	1380	!-- Building output strings, starting with surface humidity
[75]	1381	IF ( humidity .OR. passive_scalar ) THEN
[1]	1382	WRITE ( temperatures, '(E8.1)' ) q_surface
	1383	gradients = '--------'
	1384	slices = ' 0'
	1385	coordinates = ' 0.0'
	1386	i = 1
	1387	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1388
	1389	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1390	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1391
	1392	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1393	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1394
	1395	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1396	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1397
	1398	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1399	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1400
[430]	1401	IF ( i == 10 ) THEN
	1402	EXIT
	1403	ELSE
	1404	i = i + 1
	1405	ENDIF
	1406
[1]	1407	ENDDO
	1408
[75]	1409	IF ( humidity ) THEN
[1]	1410	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1411	TRIM( gradients ), TRIM( slices )
	1412	ELSE
	1413	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1414	TRIM( gradients ), TRIM( slices )
	1415	ENDIF
	1416	ENDIF
	1417
	1418	!
[97]	1419	!-- Initial salinity profile
	1420	!-- Building output strings, starting with surface salinity
	1421	IF ( ocean ) THEN
	1422	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1423	gradients = '------'
	1424	slices = ' 0'
	1425	coordinates = ' 0.0'
	1426	i = 1
	1427	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1428
	1429	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1430	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1431
	1432	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1433	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1434
	1435	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1436	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1437
	1438	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1439	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1440
[430]	1441	IF ( i == 10 ) THEN
	1442	EXIT
	1443	ELSE
	1444	i = i + 1
	1445	ENDIF
	1446
[97]	1447	ENDDO
	1448
	1449	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1450	TRIM( gradients ), TRIM( slices )
	1451	ENDIF
	1452
	1453	!
[411]	1454	!-- Profile for the large scale vertial velocity
	1455	!-- Building output strings, starting with surface value
	1456	IF ( large_scale_subsidence ) THEN
	1457	temperatures = ' 0.0'
	1458	gradients = '------'
	1459	slices = ' 0'
	1460	coordinates = ' 0.0'
	1461	i = 1
[580]	1462	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1463
	1464	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1465	w_subs(subs_vertical_gradient_level_i(i))
[411]	1466	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1467
[580]	1468	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1469	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1470
[580]	1471	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1472	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1473
[580]	1474	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1475	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1476
[430]	1477	IF ( i == 10 ) THEN
	1478	EXIT
	1479	ELSE
	1480	i = i + 1
	1481	ENDIF
	1482
[411]	1483	ENDDO
	1484
	1485	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1486	TRIM( gradients ), TRIM( slices )
	1487	ENDIF
	1488
	1489	!
[824]	1490	!-- Cloud physcis parameters / quantities / numerical methods
	1491	WRITE ( io, 430 )
	1492	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1493	WRITE ( io, 431 )
	1494	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1495	WRITE ( io, 432 )
	1496	IF ( radiation ) WRITE ( io, 132 )
	1497	IF ( precipitation ) WRITE ( io, 133 )
	1498	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1499	WRITE ( io, 433 )
	1500	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1501	IF ( collision_kernel /= 'none' ) THEN
	1502	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1503	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1504	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1505	ENDIF
[825]	1506	ELSE
[828]	1507	WRITE ( io, 437 )
[825]	1508	ENDIF
[824]	1509	ENDIF
	1510
	1511	!
[1]	1512	!-- LES / turbulence parameters
	1513	WRITE ( io, 450 )
	1514
	1515	!--
	1516	! ... LES-constants used must still be added here
	1517	!--
	1518	IF ( constant_diffusion ) THEN
	1519	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1520	prandtl_number
	1521	ENDIF
	1522	IF ( .NOT. constant_diffusion) THEN
[108]	1523	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1524	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1525	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1526	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1527	ENDIF
	1528
	1529	!
	1530	!-- Special actions during the run
	1531	WRITE ( io, 470 )
	1532	IF ( create_disturbances ) THEN
	1533	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1534	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1535	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1536	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1537	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1538	ELSE
	1539	WRITE ( io, 473 ) disturbance_energy_limit
	1540	ENDIF
	1541	WRITE ( io, 474 ) TRIM( random_generator )
	1542	ENDIF
	1543	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1544	WRITE ( io, 475 ) pt_surface_initial_change
	1545	ENDIF
[75]	1546	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1547	WRITE ( io, 476 ) q_surface_initial_change
	1548	ENDIF
	1549	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1550	WRITE ( io, 477 ) q_surface_initial_change
	1551	ENDIF
	1552
[60]	1553	IF ( particle_advection ) THEN
[1]	1554	!
[60]	1555	!-- Particle attributes
	1556	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1557	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1558	end_time_prel, dt_sort_particles
[60]	1559	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1560	IF ( random_start_position ) WRITE ( io, 481 )
	1561	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1562	WRITE ( io, 495 ) total_number_of_particles
[824]	1563	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1564	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1565	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1566	WRITE ( io, 484 ) total_number_of_tails, &
	1567	minimum_tailpoint_distance, &
	1568	maximum_tailpoint_age
	1569	ENDIF
[1]	1570	ENDIF
[60]	1571	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1572	WRITE ( io, 485 ) dt_write_particle_data
	1573	output_format = ''
	1574	IF ( netcdf_output ) THEN
[493]	1575	IF ( netcdf_data_format > 1 ) THEN
[60]	1576	output_format = 'netcdf (64 bit offset) and binary'
	1577	ELSE
	1578	output_format = 'netcdf and binary'
	1579	ENDIF
[1]	1580	ELSE
[60]	1581	output_format = 'binary'
[1]	1582	ENDIF
[292]	1583	WRITE ( io, 344 ) output_format
[1]	1584	ENDIF
[60]	1585	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1586	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1587
[60]	1588	WRITE ( io, 487 ) number_of_particle_groups
[1]	1589
[60]	1590	DO i = 1, number_of_particle_groups
	1591	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1592	WRITE ( io, 490 ) i, 0.0
	1593	WRITE ( io, 492 )
[1]	1594	ELSE
[60]	1595	WRITE ( io, 490 ) i, radius(i)
	1596	IF ( density_ratio(i) /= 0.0 ) THEN
	1597	WRITE ( io, 491 ) density_ratio(i)
	1598	ELSE
	1599	WRITE ( io, 492 )
	1600	ENDIF
[1]	1601	ENDIF
[60]	1602	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1603	pdx(i), pdy(i), pdz(i)
[336]	1604	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1605	ENDDO
[1]	1606
[60]	1607	ENDIF
[1]	1608
[60]	1609
[1]	1610	!
	1611	!-- Parameters of 1D-model
	1612	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1613	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1614	mixing_length_1d, dissipation_1d
	1615	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1616	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1617	ENDIF
	1618	ENDIF
	1619
	1620	!
	1621	!-- User-defined informations
	1622	CALL user_header( io )
	1623
	1624	WRITE ( io, 99 )
	1625
	1626	!
	1627	!-- Write buffer contents to disc immediately
[82]	1628	CALL local_flush( io )
[1]	1629
	1630	!
	1631	!-- Here the FORMATs start
	1632
	1633	99 FORMAT (1X,78('-'))
[200]	1634	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1635	1X,'* ',A,' *',9X,A/ &
	1636	1X,'***************************',9X,42('-'))
[291]	1637	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1638	37X,42('-'))
[200]	1639	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1640	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1641	' Run on host: ',A10)
[1]	1642	#if defined( __parallel )
[200]	1643	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1644	')',1X,A)
[200]	1645	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1646	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1647	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1648	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1649	37X,'because the job is running on an SMP-cluster')
[102]	1650	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1651	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1652	#endif
	1653	110 FORMAT (/' Numerical Schemes:'/ &
	1654	' -----------------'/)
	1655	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1656	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1657	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1658	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1659	' or Upstream')
	1660	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1661	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1662	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1663	' or Upstream')
	1664	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1665	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1666	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1667	' Translation velocity = ',A/ &
	1668	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1669	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1670	' of timestep changes)')
	1671	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1672	' timestep changes')
	1673	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1674	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1675	' maximum damping coefficient: ',F5.3, ' 1/s')
	1676	124 FORMAT (' Spline-overshoots are being suppressed')
	1677	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1678	' of'/ &
	1679	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1680	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1681	' of'/ &
	1682	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1683	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1684	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1685	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1686	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1687	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1688	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1689	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1690	F6.2, ' K assumed')
[824]	1691	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1692	' effective emissivity scheme')
[824]	1693	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1694	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1695	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1696	A,'-cycle)'/ &
	1697	' number of grid levels: ',I2/ &
	1698	' Gauss-Seidel red/black iterations: ',I2)
	1699	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1700	I3,')')
	1701	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1702	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1703	I3,')'/ &
	1704	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1705	I3,')')
	1706	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1707	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1708	140 FORMAT (' maximum residual allowed: ',E10.3)
	1709	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1710	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1711	'step')
[87]	1712	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1713	'kinetic energy')
[927]	1714	144 FORMAT (' masking method is used')
[1]	1715	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1716	'conserved'/ &
	1717	' using the ',A,' mode')
	1718	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1719	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1720	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1721	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1722	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1723	'prognostic equation for')
	1724	154 FORMAT (' the potential temperature')
[1]	1725	200 FORMAT (//' Run time and time step information:'/ &
	1726	' ----------------------------------'/)
	1727	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1728	' CFL-factor: ',F4.2)
	1729	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1730	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1731	' End time: ',F9.3,' s')
	1732	204 FORMAT ( A,F9.3,' s')
	1733	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1734	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1735	' CPU-time used: ',F9.3,' s per timestep: ', &
	1736	' ',F9.3,' s'/ &
	1737	' per second of simulated tim', &
	1738	'e: ',F9.3,' s')
[291]	1739	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1740	250 FORMAT (//' Computational grid and domain size:'/ &
	1741	' ----------------------------------'// &
	1742	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1743	' m dz = ',F7.3,' m'/ &
	1744	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1745	' m z(u) = ',F10.3,' m'/)
	1746	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1747	' factor: ',F5.3/ &
	1748	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1749	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1750	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1751	255 FORMAT (' Subdomains have equal size')
	1752	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1753	'have smaller sizes'/ &
	1754	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1755	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1756	' degrees')
	1757	270 FORMAT (//' Topography informations:'/ &
	1758	' -----------------------'// &
	1759	1X,'Topography: ',A)
	1760	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1761	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1762	' / ',I4)
[240]	1763	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1764	' direction' / &
	1765	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1766	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1767	278 FORMAT (' Topography grid definition convention:'/ &
	1768	' cell edge (staggered grid points'/ &
	1769	' (u in x-direction, v in y-direction))' /)
	1770	279 FORMAT (' Topography grid definition convention:'/ &
	1771	' cell center (scalar grid points)' /)
[138]	1772	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1773	' ------------------------------'// &
	1774	' Canopy mode: ', A / &
	1775	' Canopy top: ',I4 / &
	1776	' Leaf drag coefficient: ',F6.2 /)
[153]	1777	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1778	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1779	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1780	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1781	' Height: ',A,' m'/ &
	1782	' Leaf area density: ',A,' m2/m3'/ &
	1783	' Gradient: ',A,' m2/m4'/ &
	1784	' Gridpoint: ',A)
	1785
[1]	1786	300 FORMAT (//' Boundary conditions:'/ &
	1787	' -------------------'// &
	1788	' p uv ', &
	1789	' pt'// &
	1790	' B. bound.: ',A/ &
	1791	' T. bound.: ',A)
[97]	1792	301 FORMAT (/' ',A// &
[1]	1793	' B. bound.: ',A/ &
	1794	' T. bound.: ',A)
[19]	1795	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1796	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1797	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1798	'computational u,v-level:'// &
[1]	1799	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1800	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1801	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1802	307 FORMAT (' Heatflux has a random normal distribution')
	1803	308 FORMAT (' Predefined surface temperature')
[97]	1804	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1805	310 FORMAT (//' 1D-Model:'// &
	1806	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1807	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1808	312 FORMAT (' Predefined surface humidity')
	1809	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1810	314 FORMAT (' Predefined scalar value at the surface')
[19]	1811	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1812	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1813	'atmosphere model')
[1]	1814	317 FORMAT (//' Lateral boundaries:'/ &
	1815	' left/right: ',A/ &
	1816	' north/south: ',A)
	1817	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1818	'max =',F5.1,' m**2/s')
[151]	1819	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1820	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1821	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1822	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1823	' v: ',F9.6,' m2/s2')
[151]	1824	325 FORMAT (//' List output:'/ &
[1]	1825	' -----------'// &
	1826	' 1D-Profiles:'/ &
	1827	' Output every ',F8.2,' s')
[151]	1828	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1829	' Averaging input every ',F8.2,' s')
	1830	330 FORMAT (//' Data output:'/ &
	1831	' -----------'/)
	1832	331 FORMAT (/' 1D-Profiles:')
	1833	332 FORMAT (/' ',A)
	1834	333 FORMAT (' Output every ',F8.2,' s',/ &
	1835	' Time averaged over ',F8.2,' s'/ &
	1836	' Averaging input every ',F8.2,' s')
	1837	334 FORMAT (/' 2D-Arrays',A,':')
	1838	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1839	' Output every ',F8.2,' s ',A/ &
	1840	' Cross sections at ',A1,' = ',A/ &
	1841	' scalar-coordinates: ',A,' m'/)
	1842	336 FORMAT (/' 3D-Arrays',A,':')
	1843	337 FORMAT (/' Arrays: ',A/ &
	1844	' Output every ',F8.2,' s ',A/ &
	1845	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1846	338 FORMAT (' Compressed data output'/ &
	1847	' Decimal precision: ',A/)
	1848	339 FORMAT (' No output during initial ',F8.2,' s')
	1849	340 FORMAT (/' Time series:')
	1850	341 FORMAT (' Output every ',F8.2,' s'/)
	1851	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1852	' Output every ',F8.2,' s ',A/ &
	1853	' Time averaged over ',F8.2,' s'/ &
	1854	' Averaging input every ',F8.2,' s'/ &
	1855	' Cross sections at ',A1,' = ',A/ &
	1856	' scalar-coordinates: ',A,' m'/)
	1857	343 FORMAT (/' Arrays: ',A/ &
	1858	' Output every ',F8.2,' s ',A/ &
	1859	' Time averaged over ',F8.2,' s'/ &
	1860	' Averaging input every ',F8.2,' s'/ &
	1861	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1862	344 FORMAT (' Output format: ',A/)
[410]	1863	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1864	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1865	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1866	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1867	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1868	347 FORMAT (' Variables: ',A/ &
	1869	' Output every ',F8.2,' s')
	1870	348 FORMAT (' Variables: ',A/ &
	1871	' Output every ',F8.2,' s'/ &
	1872	' Time averaged over ',F8.2,' s'/ &
	1873	' Averaging input every ',F8.2,' s')
	1874	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1875	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1876	13(' ',8(F8.2,',')/) )
	1877	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1878	'all gridpoints along ',A,'-direction (default).' )
	1879	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1880	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1881	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1882	#if defined( __dvrp_graphics )
	1883	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1884	' Output every ',F7.1,' s'/ &
	1885	' Output mode: ',A/ &
	1886	' Host / User: ',A,' / ',A/ &
	1887	' Directory: ',A// &
	1888	' The sequence contains:')
[337]	1889	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1890	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1891	362 FORMAT (/' Slicer plane ',A/ &
[336]	1892	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1893	363 FORMAT (/' Particles'/ &
[336]	1894	' particle size: ',F7.2,' m')
	1895	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1896	F6.2,',',F6.2,']')
[337]	1897	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1898	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1899	')'/ &
	1900	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1901	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1902	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1903	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1904	#endif
	1905	#if defined( __spectra )
	1906	370 FORMAT (' Spectra:')
	1907	371 FORMAT (' Output every ',F7.1,' s'/)
	1908	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1909	' Directions: ', 10(A5,',')/ &
[189]	1910	' height levels k = ', 20(I3,',')/ &
	1911	' ', 20(I3,',')/ &
	1912	' ', 20(I3,',')/ &
	1913	' ', 20(I3,',')/ &
	1914	' ', 19(I3,','),I3,'.'/ &
[1]	1915	' height levels selected for standard plot:'/ &
[189]	1916	' k = ', 20(I3,',')/ &
	1917	' ', 20(I3,',')/ &
	1918	' ', 20(I3,',')/ &
	1919	' ', 20(I3,',')/ &
	1920	' ', 19(I3,','),I3,'.'/ &
[1]	1921	' Time averaged over ', F7.1, ' s,' / &
	1922	' Profiles for the time averaging are taken every ', &
	1923	F6.1,' s')
	1924	#endif
	1925	400 FORMAT (//' Physical quantities:'/ &
	1926	' -------------------'/)
	1927	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1928	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1929	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1930	' f* = ',F9.6,' 1/s')
	1931	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1932	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1933	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1934	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1935	' ------------------------'/)
[57]	1936	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1937	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1938	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1939	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1940	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1941	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1942	' Height: ',A,' m'/ &
	1943	' Temperature: ',A,' K'/ &
	1944	' Gradient: ',A,' K/100m'/ &
	1945	' Gridpoint: ',A)
	1946	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1947	' Height: ',A,' m'/ &
	1948	' Humidity: ',A,' kg/kg'/ &
	1949	' Gradient: ',A,' (kg/kg)/100m'/ &
	1950	' Gridpoint: ',A)
	1951	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1952	' Height: ',A,' m'/ &
	1953	' Scalar concentration: ',A,' kg/m**3'/ &
	1954	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1955	' Gridpoint: ',A)
	1956	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1957	' Height: ',A,' m'/ &
	1958	' ug: ',A,' m/s'/ &
	1959	' Gradient: ',A,' 1/100s'/ &
	1960	' Gridpoint: ',A)
	1961	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1962	' Height: ',A,' m'/ &
[97]	1963	' vg: ',A,' m/s'/ &
[1]	1964	' Gradient: ',A,' 1/100s'/ &
	1965	' Gridpoint: ',A)
[97]	1966	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1967	' Height: ',A,' m'/ &
	1968	' Salinity: ',A,' psu'/ &
	1969	' Gradient: ',A,' psu/100m'/ &
	1970	' Gridpoint: ',A)
[411]	1971	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1972	' Height: ',A,' m'/ &
	1973	' w_subs: ',A,' m/s'/ &
	1974	' Gradient: ',A,' (m/s)/100m'/ &
	1975	' Gridpoint: ',A)
[767]	1976	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1977	' profiles')
[824]	1978	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1979	' ----------------------------------'/)
	1980	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1981	'on)')
	1982	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1983	' total water content is used.'/ &
	1984	' Condensation is parameterized via 0% - or 100% scheme.')
	1985	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1986	'icle model')
	1987	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1988	' droplets < 1.0E-6 m')
[825]	1989	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1990	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1991	'are used'/ &
	1992	' number of radius classes: ',I3,' interval ', &
	1993	'[1.0E-6,2.0E-4] m'/ &
	1994	' number of dissipation classes: ',I2,' interval ', &
	1995	'[0,1000] cm2/s3')
	1996	437 FORMAT (' Droplet collision is switched off')
[1]	1997	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1998	' ---------------------------'/)
[824]	1999	451 FORMAT (' Diffusion coefficients are constant:'/ &
	2000	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	2001	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	2002	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	2003	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	2004	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	2005	470 FORMAT (//' Actions during the simulation:'/ &
	2006	' -----------------------------'/)
[94]	2007	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	2008	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	2009	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	2010	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	2011	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	2012	' to i/j =',I4)
	2013	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	2014	1X,F5.3, ' m2/s2')
	2015	474 FORMAT (' Random number generator used : ',A/)
	2016	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	2017	'respectively, if'/ &
	2018	' the value is negative) by ',F5.2,' K at the beginning of the',&
	2019	' 3D-simulation'/)
	2020	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	2021	'respectively, if the'/ &
	2022	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	2023	' the 3D-simulation'/)
	2024	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	2025	'respectively, if the'/ &
	2026	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	2027	' the 3D-simulation'/)
	2028	480 FORMAT (' Particles:'/ &
	2029	' ---------'// &
	2030	' Particle advection is active (switched on at t = ', F7.1, &
	2031	' s)'/ &
	2032	' Start of new particle generations every ',F6.1,' s'/ &
	2033	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	2034	' bottom: ', A, ' top: ', A/&
	2035	' Maximum particle age: ',F9.1,' s'/ &
[117]	2036	' Advection stopped at t = ',F9.1,' s'/ &
	2037	' Particles are sorted every ',F9.1,' s'/)
[1]	2038	481 FORMAT (' Particles have random start positions'/)
[336]	2039	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2040	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2041	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2042	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2043	' Maximum age of the end of the tail: ',F8.2,' s')
	2044	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2045	486 FORMAT (' Particle statistics are written on file'/)
	2046	487 FORMAT (' Number of particle groups: ',I2/)
	2047	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2048	' minimum timestep for advection: ', F7.5/)
	2049	489 FORMAT (' Number of particles simultaneously released at each ', &
	2050	'point: ', I5/)
	2051	490 FORMAT (' Particle group ',I2,':'/ &
	2052	' Particle radius: ',E10.3, 'm')
	2053	491 FORMAT (' Particle inertia is activated'/ &
	2054	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2055	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2056	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2057	' y:',F8.1,' - ',F8.1,' m'/&
	2058	' z:',F8.1,' - ',F8.1,' m'/&
	2059	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2060	' m dz = ',F8.1,' m'/)
	2061	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2062	F8.2,' s'/)
	2063	495 FORMAT (' Number of particles in total domain: ',I10/)
	2064	500 FORMAT (//' 1D-Model parameters:'/ &
	2065	' -------------------'// &
	2066	' Simulation time: ',F8.1,' s'/ &
	2067	' Run-controll output every: ',F8.1,' s'/ &
	2068	' Vertical profile output every: ',F8.1,' s'/ &
	2069	' Mixing length calculation: ',A/ &
	2070	' Dissipation calculation: ',A/)
	2071	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2072	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2073	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2074
	2075
	2076	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |