Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 931

Last change on this file since 931 was 928, checked in by raasch, 12 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.8 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[928]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 928 2012-06-06 19:54:18Z maronga $
	11	!
[928]	12	! 927 2012-06-06 19:15:04Z raasch
	13	! output of masking_method for mg-solver
	14	!
[869]	15	! 868 2012-03-28 12:21:07Z raasch
	16	! translation velocity in Galilean transformation changed to 0.6 * ug
	17	!
[834]	18	! 833 2012-02-22 08:55:55Z maronga
	19	! Adjusted format for leaf area density
	20	!
[829]	21	! 828 2012-02-21 12:00:36Z raasch
	22	! output of dissipation_classes + radius_classes
	23	!
[826]	24	! 825 2012-02-19 03:03:44Z raasch
	25	! Output of cloud physics parameters/quantities complemented and restructured
	26	!
[768]	27	! 767 2011-10-14 06:39:12Z raasch
	28	! Output of given initial u,v-profiles
	29	!
[760]	30	! 759 2011-09-15 13:58:31Z raasch
	31	! output of maximum number of parallel io streams
	32	!
[708]	33	! 707 2011-03-29 11:39:40Z raasch
	34	! bc_lr/ns replaced by bc_lr/ns_cyc
	35	!
[668]	36	! 667 2010-12-23 12:06:00Z suehring/gryschka
	37	! Output of advection scheme.
	38	! Modified output of Prandtl-layer height.
	39	!
[581]	40	! 580 2010-10-05 13:59:11Z heinze
	41	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	42	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	43	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	44	!
[494]	45	! 493 2010-03-01 08:30:24Z raasch
	46	! NetCDF data output format extendend for NetCDF4/HDF5
	47	!
[482]	48	! 449 2010-02-02 11:23:59Z raasch
	49	! +large scale vertical motion (subsidence/ascent)
	50	! Bugfix: index problem concerning gradient_level indices removed
	51	!
[449]	52	! 410 2009-12-04 17:05:40Z letzel
	53	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	54	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	55	!
[392]	56	! 346 2009-07-06 10:13:41Z raasch
[328]	57	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	58	! Coupling with independent precursor runs.
[254]	59	! Output of messages replaced by message handling routine.
[336]	60	! Output of several additional dvr parameters
[240]	61	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	62	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	63	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	64	! topography_grid_convention moved from user_header
[292]	65	! small bugfix concerning 3d 64bit netcdf output format
[1]	66	!
[226]	67	! 206 2008-10-13 14:59:11Z raasch
	68	! Bugfix: error in zu index in case of section_xy = -1
	69	!
[200]	70	! 198 2008-09-17 08:55:28Z raasch
	71	! Format adjustments allowing output of larger revision numbers
	72	!
[198]	73	! 197 2008-09-16 15:29:03Z raasch
	74	! allow 100 spectra levels instead of 10 for consistency with
	75	! define_netcdf_header,
	76	! bugfix in the output of the characteristic levels of potential temperature,
	77	! geostrophic wind, scalar concentration, humidity and leaf area density,
	78	! output of turbulence recycling informations
	79	!
[139]	80	! 138 2007-11-28 10:03:58Z letzel
	81	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	82	! Allow two instead of one digit to specify isosurface and slicer variables.
	83	! Output of sorting frequency of particles
	84	!
[110]	85	! 108 2007-08-24 15:10:38Z letzel
	86	! Output of informations for coupled model runs (boundary conditions etc.)
	87	! + output of momentumfluxes at the top boundary
	88	! Rayleigh damping for ocean, e_init
	89	!
[98]	90	! 97 2007-06-21 08:23:15Z raasch
	91	! Adjustments for the ocean version.
	92	! use_pt_reference renamed use_reference
	93	!
[90]	94	! 87 2007-05-22 15:46:47Z raasch
	95	! Bugfix: output of use_upstream_for_tke
	96	!
[83]	97	! 82 2007-04-16 15:40:52Z raasch
	98	! Preprocessor strings for different linux clusters changed to "lc",
	99	! routine local_flush is used for buffer flushing
	100	!
[77]	101	! 76 2007-03-29 00:58:32Z raasch
	102	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	103	! output of the loop optimization method, moisture renamed humidity,
	104	! output of subversion revision number
	105	!
[39]	106	! 19 2007-02-23 04:53:48Z raasch
	107	! Output of scalar flux applied at top boundary
	108	!
[3]	109	! RCS Log replace by Id keyword, revision history cleaned up
	110	!
[1]	111	! Revision 1.63 2006/08/22 13:53:13 raasch
	112	! Output of dz_max
	113	!
	114	! Revision 1.1 1997/08/11 06:17:20 raasch
	115	! Initial revision
	116	!
	117	!
	118	! Description:
	119	! ------------
	120	! Writing a header with all important informations about the actual run.
	121	! This subroutine is called three times, two times at the beginning
	122	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	123	! end of the run, then writing additional information about CPU-usage on file
	124	! header.
[411]	125	!-----------------------------------------------------------------------------!
[1]	126
	127	USE arrays_3d
	128	USE control_parameters
	129	USE cloud_parameters
	130	USE cpulog
	131	USE dvrp_variables
	132	USE grid_variables
	133	USE indices
	134	USE model_1d
	135	USE particle_attributes
	136	USE pegrid
[411]	137	USE subsidence_mod
[1]	138	USE spectrum
	139
	140	IMPLICIT NONE
	141
	142	CHARACTER (LEN=1) :: prec
	143	CHARACTER (LEN=2) :: do2d_mode
	144	CHARACTER (LEN=5) :: section_chr
	145	CHARACTER (LEN=9) :: time_to_string
	146	CHARACTER (LEN=10) :: coor_chr, host_chr
	147	CHARACTER (LEN=16) :: begin_chr
[200]	148	CHARACTER (LEN=23) :: ver_rev
[1]	149	CHARACTER (LEN=40) :: output_format
[167]	150	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	151	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	152	domask_chr, run_classification
[167]	153	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	154	temperatures, ugcomponent, vgcomponent
[1]	155	CHARACTER (LEN=85) :: roben, runten
	156
[410]	157	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	158
	159	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	160	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	161	REAL :: cpuseconds_per_simulated_second
	162
	163	!
	164	!-- Open the output file. At the end of the simulation, output is directed
	165	!-- to unit 19.
	166	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	167	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	168	io = 15 ! header output on file RUN_CONTROL
	169	ELSE
	170	io = 19 ! header output on file HEADER
	171	ENDIF
	172	CALL check_open( io )
	173
	174	!
	175	!-- At the end of the run, output file (HEADER) will be rewritten with
	176	!-- new informations
	177	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	178
	179	!
	180	!-- Determine kind of model run
	181	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	182	run_classification = '3D - restart run'
[328]	183	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	184	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	185	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	186	run_classification = '3D - run without 1D - prerun'
[197]	187	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	188	run_classification = '3D - run with 1D - prerun'
[197]	189	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	190	run_classification = '3D - run initialized by user'
[1]	191	ELSE
[254]	192	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	193	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	194	ENDIF
[97]	195	IF ( ocean ) THEN
	196	run_classification = 'ocean - ' // run_classification
	197	ELSE
	198	run_classification = 'atmosphere - ' // run_classification
	199	ENDIF
[1]	200
	201	!
	202	!-- Run-identification, date, time, host
	203	host_chr = host(1:10)
[75]	204	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	205	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	206	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	207	#if defined( __mpi2 )
	208	mpi_type = 2
	209	#else
	210	mpi_type = 1
	211	#endif
	212	WRITE ( io, 101 ) mpi_type, coupling_mode
	213	ENDIF
[102]	214	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	215	ADJUSTR( host_chr )
[1]	216	#if defined( __parallel )
	217	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	218	char1 = 'calculated'
	219	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	220	host(1:2) == 'lc' ) .AND. &
	221	npex == -1 .AND. pdims(2) == 1 ) THEN
	222	char1 = 'forced'
	223	ELSE
	224	char1 = 'predefined'
	225	ENDIF
	226	IF ( threads_per_task == 1 ) THEN
[102]	227	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	228	ELSE
[102]	229	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	230	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	231	ENDIF
	232	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	233	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	234	npex == -1 .AND. pdims(2) == 1 ) &
	235	THEN
[102]	236	WRITE ( io, 106 )
[1]	237	ELSEIF ( pdims(2) == 1 ) THEN
[102]	238	WRITE ( io, 107 ) 'x'
[1]	239	ELSEIF ( pdims(1) == 1 ) THEN
[102]	240	WRITE ( io, 107 ) 'y'
[1]	241	ENDIF
[102]	242	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	243	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	244	WRITE ( io, 108 ) maximum_parallel_io_streams
	245	ENDIF
[1]	246	#endif
	247	WRITE ( io, 99 )
	248
	249	!
	250	!-- Numerical schemes
	251	WRITE ( io, 110 )
	252	IF ( psolver(1:7) == 'poisfft' ) THEN
	253	WRITE ( io, 111 ) TRIM( fft_method )
	254	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	255	ELSEIF ( psolver == 'sor' ) THEN
	256	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	257	ELSEIF ( psolver == 'multigrid' ) THEN
	258	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	259	IF ( mg_cycles == -1 ) THEN
	260	WRITE ( io, 140 ) residual_limit
	261	ELSE
	262	WRITE ( io, 141 ) mg_cycles
	263	ENDIF
	264	IF ( mg_switch_to_pe0_level == 0 ) THEN
	265	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	266	nzt_mg(1)
[197]	267	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	268	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	269	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	270	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	271	nzt_mg(mg_switch_to_pe0_level), &
	272	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	273	nzt_mg(1)
	274	ENDIF
[927]	275	IF ( masking_method ) WRITE ( io, 144 )
[1]	276	ENDIF
	277	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	278	THEN
	279	WRITE ( io, 142 )
	280	ENDIF
	281
	282	IF ( momentum_advec == 'pw-scheme' ) THEN
	283	WRITE ( io, 113 )
[667]	284	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	285	WRITE ( io, 503 )
	286	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	287	WRITE ( io, 114 )
	288	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	289	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	290	overshoot_limit_w /= 0.0 ) THEN
	291	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	292	overshoot_limit_w
	293	ENDIF
	294	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	295	ups_limit_w /= 0.0 ) &
	296	THEN
	297	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	298	ENDIF
	299	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	300	ENDIF
	301	IF ( scalar_advec == 'pw-scheme' ) THEN
	302	WRITE ( io, 116 )
[667]	303	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	304	WRITE ( io, 504 )
[1]	305	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	306	WRITE ( io, 117 )
	307	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	308	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	309	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	310	ENDIF
	311	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	312	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	313	ENDIF
	314	ELSE
	315	WRITE ( io, 118 )
	316	ENDIF
[63]	317
	318	WRITE ( io, 139 ) TRIM( loop_optimization )
	319
[1]	320	IF ( galilei_transformation ) THEN
	321	IF ( use_ug_for_galilei_tr ) THEN
[868]	322	char1 = '0.6 * geostrophic wind'
[1]	323	ELSE
	324	char1 = 'mean wind in model domain'
	325	ENDIF
	326	IF ( simulated_time_at_begin == simulated_time ) THEN
	327	char2 = 'at the start of the run'
	328	ELSE
	329	char2 = 'at the end of the run'
	330	ENDIF
	331	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	332	advected_distance_x/1000.0, advected_distance_y/1000.0
	333	ENDIF
	334	IF ( timestep_scheme == 'leapfrog' ) THEN
	335	WRITE ( io, 120 )
	336	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	337	WRITE ( io, 121 )
	338	ELSE
	339	WRITE ( io, 122 ) timestep_scheme
	340	ENDIF
[87]	341	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	342	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	343	IF ( .NOT. ocean ) THEN
	344	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	345	rayleigh_damping_factor
	346	ELSE
	347	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	348	rayleigh_damping_factor
	349	ENDIF
[1]	350	ENDIF
[75]	351	IF ( humidity ) THEN
[1]	352	IF ( .NOT. cloud_physics ) THEN
	353	WRITE ( io, 129 )
	354	ELSE
	355	WRITE ( io, 130 )
	356	ENDIF
	357	ENDIF
	358	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	359	IF ( conserve_volume_flow ) THEN
[241]	360	WRITE ( io, 150 ) conserve_volume_flow_mode
	361	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	362	WRITE ( io, 151 ) u_bulk, v_bulk
	363	ENDIF
[240]	364	ELSEIF ( dp_external ) THEN
	365	IF ( dp_smooth ) THEN
[241]	366	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	367	ELSE
[241]	368	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	369	ENDIF
	370	ENDIF
[411]	371	IF ( large_scale_subsidence ) THEN
	372	WRITE ( io, 153 )
	373	WRITE ( io, 154 )
	374	ENDIF
[1]	375	WRITE ( io, 99 )
	376
	377	!
	378	!-- Runtime and timestep informations
	379	WRITE ( io, 200 )
	380	IF ( .NOT. dt_fixed ) THEN
	381	WRITE ( io, 201 ) dt_max, cfl_factor
	382	ELSE
	383	WRITE ( io, 202 ) dt
	384	ENDIF
	385	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	386
	387	IF ( time_restart /= 9999999.9 .AND. &
	388	simulated_time_at_begin == simulated_time ) THEN
	389	IF ( dt_restart == 9999999.9 ) THEN
	390	WRITE ( io, 204 ) ' Restart at: ',time_restart
	391	ELSE
	392	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	393	ENDIF
	394	ENDIF
	395
	396	IF ( simulated_time_at_begin /= simulated_time ) THEN
	397	i = MAX ( log_point_s(10)%counts, 1 )
	398	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	399	cpuseconds_per_simulated_second = 0.0
	400	ELSE
	401	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	402	( simulated_time - &
	403	simulated_time_at_begin )
	404	ENDIF
	405	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	406	log_point_s(10)%sum / REAL( i ), &
	407	cpuseconds_per_simulated_second
	408	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	409	IF ( dt_restart == 9999999.9 ) THEN
	410	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	411	ELSE
	412	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	413	ENDIF
	414	ENDIF
	415	ENDIF
	416
	417	!
[291]	418	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	419	!-- and ocean are used. In this case, coupling_start_time defines the time
	420	!-- when the coupling is switched on.
	421	IF ( coupling_start_time /= 0.0 ) THEN
	422	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	423	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	424	ELSE
	425	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	426	'precursor runs'
	427	ENDIF
	428	WRITE ( io, 207 ) char1, coupling_start_time
	429	ENDIF
	430
	431	!
[1]	432	!-- Computational grid
[94]	433	IF ( .NOT. ocean ) THEN
	434	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	435	IF ( dz_stretch_level_index < nzt+1 ) THEN
	436	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	437	dz_stretch_factor, dz_max
	438	ENDIF
	439	ELSE
	440	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	441	IF ( dz_stretch_level_index > 0 ) THEN
	442	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	443	dz_stretch_factor, dz_max
	444	ENDIF
[1]	445	ENDIF
	446	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	447	MIN( nnz+2, nzt+2 )
[76]	448	IF ( numprocs > 1 ) THEN
	449	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	450	WRITE ( io, 255 )
	451	ELSE
	452	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	453	ENDIF
[1]	454	ENDIF
	455	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	456
	457	!
	458	!-- Topography
	459	WRITE ( io, 270 ) topography
	460	SELECT CASE ( TRIM( topography ) )
	461
	462	CASE ( 'flat' )
	463	! no actions necessary
	464
	465	CASE ( 'single_building' )
	466	blx = INT( building_length_x / dx )
	467	bly = INT( building_length_y / dy )
	468	bh = INT( building_height / dz )
	469
	470	IF ( building_wall_left == 9999999.9 ) THEN
	471	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	472	ENDIF
	473	bxl = INT ( building_wall_left / dx + 0.5 )
	474	bxr = bxl + blx
	475
	476	IF ( building_wall_south == 9999999.9 ) THEN
	477	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	478	ENDIF
	479	bys = INT ( building_wall_south / dy + 0.5 )
	480	byn = bys + bly
	481
	482	WRITE ( io, 271 ) building_length_x, building_length_y, &
	483	building_height, bxl, bxr, bys, byn
	484
[240]	485	CASE ( 'single_street_canyon' )
	486	ch = NINT( canyon_height / dz )
	487	IF ( canyon_width_x /= 9999999.9 ) THEN
	488	!
	489	!-- Street canyon in y direction
	490	cwx = NINT( canyon_width_x / dx )
	491	IF ( canyon_wall_left == 9999999.9 ) THEN
	492	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	493	ENDIF
	494	cxl = NINT( canyon_wall_left / dx )
	495	cxr = cxl + cwx
	496	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	497
	498	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	499	!
	500	!-- Street canyon in x direction
	501	cwy = NINT( canyon_width_y / dy )
	502	IF ( canyon_wall_south == 9999999.9 ) THEN
	503	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	504	ENDIF
	505	cys = NINT( canyon_wall_south / dy )
	506	cyn = cys + cwy
	507	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	508	ENDIF
	509
[1]	510	END SELECT
	511
[256]	512	IF ( TRIM( topography ) /= 'flat' ) THEN
	513	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	514	IF ( TRIM( topography ) == 'single_building' .OR. &
	515	TRIM( topography ) == 'single_street_canyon' ) THEN
	516	WRITE ( io, 278 )
	517	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	518	WRITE ( io, 279 )
	519	ENDIF
	520	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	521	WRITE ( io, 278 )
	522	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	523	WRITE ( io, 279 )
	524	ENDIF
	525	ENDIF
	526
[138]	527	IF ( plant_canopy ) THEN
	528
	529	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	530	IF ( passive_scalar ) THEN
	531	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	532	leaf_surface_concentration
	533	ENDIF
[138]	534
[1]	535	!
[153]	536	!-- Heat flux at the top of vegetation
	537	WRITE ( io, 282 ) cthf
	538
	539	!
[138]	540	!-- Leaf area density profile
	541	!-- Building output strings, starting with surface value
[833]	542	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	543	gradients = '------'
	544	slices = ' 0'
	545	coordinates = ' 0.0'
	546	i = 1
	547	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	548
	549	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	550	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	551
	552	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	553	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	554
	555	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	556	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	557
	558	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	559	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	560
	561	i = i + 1
	562	ENDDO
	563
[153]	564	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	565	TRIM( gradients ), TRIM( slices )
	566
	567	ENDIF
	568
	569	!
[1]	570	!-- Boundary conditions
	571	IF ( ibc_p_b == 0 ) THEN
	572	runten = 'p(0) = 0 \|'
	573	ELSEIF ( ibc_p_b == 1 ) THEN
	574	runten = 'p(0) = p(1) \|'
	575	ELSE
	576	runten = 'p(0) = p(1) +R\|'
	577	ENDIF
	578	IF ( ibc_p_t == 0 ) THEN
	579	roben = 'p(nzt+1) = 0 \|'
	580	ELSE
	581	roben = 'p(nzt+1) = p(nzt) \|'
	582	ENDIF
	583
	584	IF ( ibc_uv_b == 0 ) THEN
	585	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	586	ELSE
	587	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	588	ENDIF
[132]	589	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	590	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	591	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	592	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	593	ELSE
	594	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	595	ENDIF
	596
	597	IF ( ibc_pt_b == 0 ) THEN
	598	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	599	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	600	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	601	ELSEIF ( ibc_pt_b == 2 ) THEN
	602	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	603	ENDIF
	604	IF ( ibc_pt_t == 0 ) THEN
[19]	605	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	606	ELSEIF( ibc_pt_t == 1 ) THEN
	607	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	608	ELSEIF( ibc_pt_t == 2 ) THEN
	609	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	610
[1]	611	ENDIF
	612
	613	WRITE ( io, 300 ) runten, roben
	614
	615	IF ( .NOT. constant_diffusion ) THEN
	616	IF ( ibc_e_b == 1 ) THEN
	617	runten = 'e(0) = e(1)'
	618	ELSE
	619	runten = 'e(0) = e(1) = (u/0.1)*2'
	620	ENDIF
	621	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	622
[97]	623	WRITE ( io, 301 ) 'e', runten, roben
[1]	624
	625	ENDIF
	626
[97]	627	IF ( ocean ) THEN
	628	runten = 'sa(0) = sa(1)'
	629	IF ( ibc_sa_t == 0 ) THEN
	630	roben = 'sa(nzt+1) = sa_surface'
[1]	631	ELSE
[97]	632	roben = 'sa(nzt+1) = sa(nzt)'
[1]	633	ENDIF
[97]	634	WRITE ( io, 301 ) 'sa', runten, roben
	635	ENDIF
[1]	636
[97]	637	IF ( humidity ) THEN
	638	IF ( ibc_q_b == 0 ) THEN
	639	runten = 'q(0) = q_surface'
	640	ELSE
	641	runten = 'q(0) = q(1)'
	642	ENDIF
	643	IF ( ibc_q_t == 0 ) THEN
	644	roben = 'q(nzt) = q_top'
	645	ELSE
	646	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	647	ENDIF
	648	WRITE ( io, 301 ) 'q', runten, roben
	649	ENDIF
[1]	650
[97]	651	IF ( passive_scalar ) THEN
	652	IF ( ibc_q_b == 0 ) THEN
	653	runten = 's(0) = s_surface'
	654	ELSE
	655	runten = 's(0) = s(1)'
	656	ENDIF
	657	IF ( ibc_q_t == 0 ) THEN
	658	roben = 's(nzt) = s_top'
	659	ELSE
	660	roben = 's(nzt) = s(nzt-1) + ds/dz'
	661	ENDIF
	662	WRITE ( io, 301 ) 's', runten, roben
[1]	663	ENDIF
	664
	665	IF ( use_surface_fluxes ) THEN
	666	WRITE ( io, 303 )
	667	IF ( constant_heatflux ) THEN
	668	WRITE ( io, 306 ) surface_heatflux
	669	IF ( random_heatflux ) WRITE ( io, 307 )
	670	ENDIF
[75]	671	IF ( humidity .AND. constant_waterflux ) THEN
[1]	672	WRITE ( io, 311 ) surface_waterflux
	673	ENDIF
	674	IF ( passive_scalar .AND. constant_waterflux ) THEN
	675	WRITE ( io, 313 ) surface_waterflux
	676	ENDIF
	677	ENDIF
	678
[19]	679	IF ( use_top_fluxes ) THEN
	680	WRITE ( io, 304 )
[102]	681	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	682	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	683	IF ( constant_top_heatflux ) THEN
	684	WRITE ( io, 306 ) top_heatflux
	685	ENDIF
	686	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	687	WRITE ( io, 316 )
[19]	688	ENDIF
[97]	689	IF ( ocean .AND. constant_top_salinityflux ) THEN
	690	WRITE ( io, 309 ) top_salinityflux
	691	ENDIF
[75]	692	IF ( humidity .OR. passive_scalar ) THEN
[19]	693	WRITE ( io, 315 )
	694	ENDIF
	695	ENDIF
	696
[1]	697	IF ( prandtl_layer ) THEN
[667]	698	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	699	rif_min, rif_max
[1]	700	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	701	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	702	WRITE ( io, 312 )
	703	ENDIF
	704	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	705	WRITE ( io, 314 )
	706	ENDIF
	707	ELSE
	708	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	709	WRITE ( io, 310 ) rif_min, rif_max
	710	ENDIF
	711	ENDIF
	712
	713	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	714	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	715	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	716	IF ( turbulent_inflow ) THEN
	717	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	718	inflow_damping_height, inflow_damping_width
	719	ENDIF
[1]	720	ENDIF
	721
	722	!
	723	!-- Listing of 1D-profiles
[151]	724	WRITE ( io, 325 ) dt_dopr_listing
[1]	725	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	726	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	727	ENDIF
	728
	729	!
	730	!-- DATA output
	731	WRITE ( io, 330 )
	732	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	733	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	734	ENDIF
	735
	736	!
	737	!-- 1D-profiles
[346]	738	dopr_chr = 'Profile:'
[1]	739	IF ( dopr_n /= 0 ) THEN
	740	WRITE ( io, 331 )
	741
	742	output_format = ''
	743	IF ( netcdf_output ) THEN
[493]	744	IF ( netcdf_data_format == 1 ) THEN
	745	output_format = 'NetCDF classic'
[1]	746	ELSE
[493]	747	output_format = 'NetCDF 64bit offset'
[1]	748	ENDIF
	749	ENDIF
	750	IF ( profil_output ) THEN
	751	IF ( netcdf_output ) THEN
	752	output_format = TRIM( output_format ) // ' and profil'
	753	ELSE
	754	output_format = 'profil'
	755	ENDIF
	756	ENDIF
[292]	757	WRITE ( io, 344 ) output_format
[1]	758
	759	DO i = 1, dopr_n
	760	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	761	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	762	WRITE ( io, 332 ) dopr_chr
	763	dopr_chr = ' :'
	764	ENDIF
	765	ENDDO
	766
	767	IF ( dopr_chr /= '' ) THEN
	768	WRITE ( io, 332 ) dopr_chr
	769	ENDIF
	770	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	771	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	772	ENDIF
	773
	774	!
	775	!-- 2D-arrays
	776	DO av = 0, 1
	777
	778	i = 1
	779	do2d_xy = ''
	780	do2d_xz = ''
	781	do2d_yz = ''
	782	DO WHILE ( do2d(av,i) /= ' ' )
	783
	784	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	785	do2d_mode = do2d(av,i)(l-1:l)
	786
	787	SELECT CASE ( do2d_mode )
	788	CASE ( 'xy' )
	789	ll = LEN_TRIM( do2d_xy )
	790	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	791	CASE ( 'xz' )
	792	ll = LEN_TRIM( do2d_xz )
	793	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	794	CASE ( 'yz' )
	795	ll = LEN_TRIM( do2d_yz )
	796	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	797	END SELECT
	798
	799	i = i + 1
	800
	801	ENDDO
	802
	803	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	804	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	805	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	806	( netcdf_output .OR. iso2d_output ) ) THEN
	807
	808	IF ( av == 0 ) THEN
	809	WRITE ( io, 334 ) ''
	810	ELSE
	811	WRITE ( io, 334 ) '(time-averaged)'
	812	ENDIF
	813
	814	IF ( do2d_at_begin ) THEN
	815	begin_chr = 'and at the start'
	816	ELSE
	817	begin_chr = ''
	818	ENDIF
	819
	820	output_format = ''
	821	IF ( netcdf_output ) THEN
[493]	822	IF ( netcdf_data_format == 1 ) THEN
	823	output_format = 'NetCDF classic'
	824	ELSEIF ( netcdf_data_format == 2 ) THEN
	825	output_format = 'NetCDF 64bit offset'
	826	ELSEIF ( netcdf_data_format == 3 ) THEN
	827	output_format = 'NetCDF4/HDF5'
	828	ELSEIF ( netcdf_data_format == 4 ) THEN
	829	output_format = 'NetCDF4/HDF5 clasic'
[1]	830	ENDIF
	831	ENDIF
	832	IF ( iso2d_output ) THEN
	833	IF ( netcdf_output ) THEN
	834	output_format = TRIM( output_format ) // ' and iso2d'
	835	ELSE
	836	output_format = 'iso2d'
	837	ENDIF
	838	ENDIF
[292]	839	WRITE ( io, 344 ) output_format
[1]	840
	841	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	842	i = 1
	843	slices = '/'
	844	coordinates = '/'
	845	!
	846	!-- Building strings with index and coordinate informations of the
	847	!-- slices
	848	DO WHILE ( section(i,1) /= -9999 )
	849
	850	WRITE (section_chr,'(I5)') section(i,1)
	851	section_chr = ADJUSTL( section_chr )
	852	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	853
[206]	854	IF ( section(i,1) == -1 ) THEN
	855	WRITE (coor_chr,'(F10.1)') -1.0
	856	ELSE
	857	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	858	ENDIF
[1]	859	coor_chr = ADJUSTL( coor_chr )
	860	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	861
	862	i = i + 1
	863	ENDDO
	864	IF ( av == 0 ) THEN
	865	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	866	TRIM( begin_chr ), 'k', TRIM( slices ), &
	867	TRIM( coordinates )
	868	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	869	WRITE ( io, 339 ) skip_time_do2d_xy
	870	ENDIF
	871	ELSE
	872	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	873	TRIM( begin_chr ), averaging_interval, &
	874	dt_averaging_input, 'k', TRIM( slices ), &
	875	TRIM( coordinates )
	876	IF ( skip_time_data_output_av /= 0.0 ) THEN
	877	WRITE ( io, 339 ) skip_time_data_output_av
	878	ENDIF
	879	ENDIF
	880
	881	ENDIF
	882
	883	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	884	i = 1
	885	slices = '/'
	886	coordinates = '/'
	887	!
	888	!-- Building strings with index and coordinate informations of the
	889	!-- slices
	890	DO WHILE ( section(i,2) /= -9999 )
	891
	892	WRITE (section_chr,'(I5)') section(i,2)
	893	section_chr = ADJUSTL( section_chr )
	894	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	895
	896	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	897	coor_chr = ADJUSTL( coor_chr )
	898	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	899
	900	i = i + 1
	901	ENDDO
	902	IF ( av == 0 ) THEN
	903	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	904	TRIM( begin_chr ), 'j', TRIM( slices ), &
	905	TRIM( coordinates )
	906	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	907	WRITE ( io, 339 ) skip_time_do2d_xz
	908	ENDIF
	909	ELSE
	910	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	911	TRIM( begin_chr ), averaging_interval, &
	912	dt_averaging_input, 'j', TRIM( slices ), &
	913	TRIM( coordinates )
	914	IF ( skip_time_data_output_av /= 0.0 ) THEN
	915	WRITE ( io, 339 ) skip_time_data_output_av
	916	ENDIF
	917	ENDIF
	918	ENDIF
	919
	920	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	921	i = 1
	922	slices = '/'
	923	coordinates = '/'
	924	!
	925	!-- Building strings with index and coordinate informations of the
	926	!-- slices
	927	DO WHILE ( section(i,3) /= -9999 )
	928
	929	WRITE (section_chr,'(I5)') section(i,3)
	930	section_chr = ADJUSTL( section_chr )
	931	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	932
	933	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	934	coor_chr = ADJUSTL( coor_chr )
	935	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	936
	937	i = i + 1
	938	ENDDO
	939	IF ( av == 0 ) THEN
	940	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	941	TRIM( begin_chr ), 'i', TRIM( slices ), &
	942	TRIM( coordinates )
	943	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	944	WRITE ( io, 339 ) skip_time_do2d_yz
	945	ENDIF
	946	ELSE
	947	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	948	TRIM( begin_chr ), averaging_interval, &
	949	dt_averaging_input, 'i', TRIM( slices ), &
	950	TRIM( coordinates )
	951	IF ( skip_time_data_output_av /= 0.0 ) THEN
	952	WRITE ( io, 339 ) skip_time_data_output_av
	953	ENDIF
	954	ENDIF
	955	ENDIF
	956
	957	ENDIF
	958
	959	ENDDO
	960
	961	!
	962	!-- 3d-arrays
	963	DO av = 0, 1
	964
	965	i = 1
	966	do3d_chr = ''
	967	DO WHILE ( do3d(av,i) /= ' ' )
	968
	969	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	970	i = i + 1
	971
	972	ENDDO
	973
	974	IF ( do3d_chr /= '' ) THEN
	975	IF ( av == 0 ) THEN
	976	WRITE ( io, 336 ) ''
	977	ELSE
	978	WRITE ( io, 336 ) '(time-averaged)'
	979	ENDIF
	980
	981	output_format = ''
	982	IF ( netcdf_output ) THEN
[493]	983	IF ( netcdf_data_format == 1 ) THEN
	984	output_format = 'NetCDF classic'
	985	ELSEIF ( netcdf_data_format == 2 ) THEN
	986	output_format = 'NetCDF 64bit offset'
	987	ELSEIF ( netcdf_data_format == 3 ) THEN
	988	output_format = 'NetCDF4/HDF5'
	989	ELSEIF ( netcdf_data_format == 4 ) THEN
	990	output_format = 'NetCDF4/HDF5 clasic'
[1]	991	ENDIF
	992	ENDIF
	993	IF ( avs_output ) THEN
	994	IF ( netcdf_output ) THEN
	995	output_format = TRIM( output_format ) // ' and avs'
	996	ELSE
	997	output_format = 'avs'
	998	ENDIF
	999	ENDIF
[292]	1000	WRITE ( io, 344 ) output_format
[1]	1001
	1002	IF ( do3d_at_begin ) THEN
	1003	begin_chr = 'and at the start'
	1004	ELSE
	1005	begin_chr = ''
	1006	ENDIF
	1007	IF ( av == 0 ) THEN
	1008	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1009	zu(nz_do3d), nz_do3d
	1010	ELSE
	1011	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1012	TRIM( begin_chr ), averaging_interval, &
	1013	dt_averaging_input, zu(nz_do3d), nz_do3d
	1014	ENDIF
	1015
	1016	IF ( do3d_compress ) THEN
	1017	do3d_chr = ''
	1018	i = 1
	1019	DO WHILE ( do3d(av,i) /= ' ' )
	1020
	1021	SELECT CASE ( do3d(av,i) )
	1022	CASE ( 'u' )
	1023	j = 1
	1024	CASE ( 'v' )
	1025	j = 2
	1026	CASE ( 'w' )
	1027	j = 3
	1028	CASE ( 'p' )
	1029	j = 4
	1030	CASE ( 'pt' )
	1031	j = 5
	1032	END SELECT
	1033	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1034	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1035	':' // prec // ','
	1036	i = i + 1
	1037
	1038	ENDDO
	1039	WRITE ( io, 338 ) do3d_chr
	1040
	1041	ENDIF
	1042
	1043	IF ( av == 0 ) THEN
	1044	IF ( skip_time_do3d /= 0.0 ) THEN
	1045	WRITE ( io, 339 ) skip_time_do3d
	1046	ENDIF
	1047	ELSE
	1048	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1049	WRITE ( io, 339 ) skip_time_data_output_av
	1050	ENDIF
	1051	ENDIF
	1052
	1053	ENDIF
	1054
	1055	ENDDO
	1056
	1057	!
[410]	1058	!-- masked arrays
	1059	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1060	mask_scale_x, mask_scale_y, mask_scale_z
	1061	DO mid = 1, masks
	1062	DO av = 0, 1
	1063
	1064	i = 1
	1065	domask_chr = ''
	1066	DO WHILE ( domask(mid,av,i) /= ' ' )
	1067	domask_chr = TRIM( domask_chr ) // ' ' // &
	1068	TRIM( domask(mid,av,i) ) // ','
	1069	i = i + 1
	1070	ENDDO
	1071
	1072	IF ( domask_chr /= '' ) THEN
	1073	IF ( av == 0 ) THEN
	1074	WRITE ( io, 346 ) '', mid
	1075	ELSE
	1076	WRITE ( io, 346 ) ' (time-averaged)', mid
	1077	ENDIF
	1078
	1079	output_format = ''
	1080	IF ( netcdf_output ) THEN
[493]	1081	IF ( netcdf_data_format == 1 ) THEN
	1082	output_format = 'NetCDF classic'
	1083	ELSEIF ( netcdf_data_format == 2 ) THEN
	1084	output_format = 'NetCDF 64bit offset'
	1085	ELSEIF ( netcdf_data_format == 3 ) THEN
	1086	output_format = 'NetCDF4/HDF5'
	1087	ELSEIF ( netcdf_data_format == 4 ) THEN
	1088	output_format = 'NetCDF4/HDF5 clasic'
	1089	ENDIF
[410]	1090	ENDIF
	1091	WRITE ( io, 344 ) output_format
	1092
	1093	IF ( av == 0 ) THEN
	1094	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1095	ELSE
	1096	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1097	averaging_interval, dt_averaging_input
	1098	ENDIF
	1099
	1100	IF ( av == 0 ) THEN
	1101	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1102	WRITE ( io, 339 ) skip_time_domask(mid)
	1103	ENDIF
	1104	ELSE
	1105	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1106	WRITE ( io, 339 ) skip_time_data_output_av
	1107	ENDIF
	1108	ENDIF
	1109	!
	1110	!-- output locations
	1111	DO dim = 1, 3
	1112	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1113	count = 0
	1114	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1115	count = count + 1
	1116	ENDDO
	1117	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1118	mask(mid,dim,:count)
	1119	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1120	mask_loop(mid,dim,2) < 0.0 .AND. &
	1121	mask_loop(mid,dim,3) == 0.0 ) THEN
	1122	WRITE ( io, 350 ) dir(dim), dir(dim)
	1123	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1124	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1125	mask_loop(mid,dim,1:2)
	1126	ELSE
	1127	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1128	mask_loop(mid,dim,1:3)
	1129	ENDIF
	1130	ENDDO
	1131	ENDIF
	1132
	1133	ENDDO
	1134	ENDDO
	1135
	1136	!
[1]	1137	!-- Timeseries
	1138	IF ( dt_dots /= 9999999.9 ) THEN
	1139	WRITE ( io, 340 )
	1140
	1141	output_format = ''
	1142	IF ( netcdf_output ) THEN
[493]	1143	IF ( netcdf_data_format == 1 ) THEN
	1144	output_format = 'NetCDF classic'
[1]	1145	ELSE
[493]	1146	output_format = 'NetCDF 64bit offset'
[1]	1147	ENDIF
	1148	ENDIF
	1149	IF ( profil_output ) THEN
	1150	IF ( netcdf_output ) THEN
	1151	output_format = TRIM( output_format ) // ' and profil'
	1152	ELSE
	1153	output_format = 'profil'
	1154	ENDIF
	1155	ENDIF
[292]	1156	WRITE ( io, 344 ) output_format
[1]	1157	WRITE ( io, 341 ) dt_dots
	1158	ENDIF
	1159
	1160	#if defined( __dvrp_graphics )
	1161	!
	1162	!-- Dvrp-output
	1163	IF ( dt_dvrp /= 9999999.9 ) THEN
	1164	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1165	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1166	i = 1
	1167	l = 0
[336]	1168	m = 0
[1]	1169	DO WHILE ( mode_dvrp(i) /= ' ' )
	1170	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1171	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1172	l = l + 1
	1173	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1174	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1175	isosurface_color(:,l)
[1]	1176	ENDIF
	1177	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1178	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1179	m = m + 1
	1180	IF ( do2d(0,j) /= ' ' ) THEN
	1181	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1182	slicer_range_limits_dvrp(:,m)
	1183	ENDIF
[1]	1184	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1185	WRITE ( io, 363 ) dvrp_psize
	1186	IF ( particle_dvrpsize /= 'none' ) THEN
	1187	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1188	dvrpsize_interval
	1189	ENDIF
	1190	IF ( particle_color /= 'none' ) THEN
	1191	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1192	color_interval
	1193	ENDIF
[1]	1194	ENDIF
	1195	i = i + 1
	1196	ENDDO
[237]	1197
[336]	1198	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1199	superelevation_y, superelevation, clip_dvrp_l, &
	1200	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1201
	1202	IF ( TRIM( topography ) /= 'flat' ) THEN
	1203	WRITE ( io, 366 ) topography_color
	1204	IF ( cluster_size > 1 ) THEN
	1205	WRITE ( io, 367 ) cluster_size
	1206	ENDIF
[237]	1207	ENDIF
	1208
[1]	1209	ENDIF
	1210	#endif
	1211
	1212	#if defined( __spectra )
	1213	!
	1214	!-- Spectra output
	1215	IF ( dt_dosp /= 9999999.9 ) THEN
	1216	WRITE ( io, 370 )
	1217
	1218	output_format = ''
	1219	IF ( netcdf_output ) THEN
[493]	1220	IF ( netcdf_data_format == 1 ) THEN
	1221	output_format = 'NetCDF classic'
[1]	1222	ELSE
[493]	1223	output_format = 'NetCDF 64bit offset'
[1]	1224	ENDIF
	1225	ENDIF
	1226	IF ( profil_output ) THEN
	1227	IF ( netcdf_output ) THEN
	1228	output_format = TRIM( output_format ) // ' and profil'
	1229	ELSE
	1230	output_format = 'profil'
	1231	ENDIF
	1232	ENDIF
[292]	1233	WRITE ( io, 344 ) output_format
[1]	1234	WRITE ( io, 371 ) dt_dosp
	1235	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1236	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1237	( spectra_direction(i), i = 1,10 ), &
[189]	1238	( comp_spectra_level(i), i = 1,100 ), &
	1239	( plot_spectra_level(i), i = 1,100 ), &
[1]	1240	averaging_interval_sp, dt_averaging_input_pr
	1241	ENDIF
	1242	#endif
	1243
	1244	WRITE ( io, 99 )
	1245
	1246	!
	1247	!-- Physical quantities
	1248	WRITE ( io, 400 )
	1249
	1250	!
	1251	!-- Geostrophic parameters
	1252	WRITE ( io, 410 ) omega, phi, f, fs
	1253
	1254	!
	1255	!-- Other quantities
	1256	WRITE ( io, 411 ) g
[97]	1257	IF ( use_reference ) THEN
	1258	IF ( ocean ) THEN
	1259	WRITE ( io, 412 ) prho_reference
	1260	ELSE
	1261	WRITE ( io, 413 ) pt_reference
	1262	ENDIF
	1263	ENDIF
[1]	1264
	1265	!
	1266	!-- Cloud physics parameters
	1267	IF ( cloud_physics ) THEN
[57]	1268	WRITE ( io, 415 )
	1269	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1270	ENDIF
	1271
	1272	!-- Profile of the geostrophic wind (component ug)
	1273	!-- Building output strings
	1274	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1275	gradients = '------'
	1276	slices = ' 0'
	1277	coordinates = ' 0.0'
	1278	i = 1
	1279	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1280
[167]	1281	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1282	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1283
[167]	1284	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1285	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1286
[167]	1287	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1288	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1289
[167]	1290	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1291	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1292
[430]	1293	IF ( i == 10 ) THEN
	1294	EXIT
	1295	ELSE
	1296	i = i + 1
	1297	ENDIF
	1298
[1]	1299	ENDDO
	1300
	1301	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1302	TRIM( gradients ), TRIM( slices )
	1303
	1304	!-- Profile of the geostrophic wind (component vg)
	1305	!-- Building output strings
	1306	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1307	gradients = '------'
	1308	slices = ' 0'
	1309	coordinates = ' 0.0'
	1310	i = 1
	1311	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1312
[167]	1313	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1314	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1315
[167]	1316	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1317	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1318
[167]	1319	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1320	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1321
[167]	1322	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1323	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1324
[430]	1325	IF ( i == 10 ) THEN
	1326	EXIT
	1327	ELSE
	1328	i = i + 1
	1329	ENDIF
	1330
[1]	1331	ENDDO
	1332
	1333	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1334	TRIM( gradients ), TRIM( slices )
	1335
	1336	!
[767]	1337	!-- Initial wind profiles
	1338	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1339
	1340	!
[1]	1341	!-- Initial temperature profile
	1342	!-- Building output strings, starting with surface temperature
	1343	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1344	gradients = '------'
	1345	slices = ' 0'
	1346	coordinates = ' 0.0'
	1347	i = 1
	1348	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1349
[94]	1350	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1351	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1352
[94]	1353	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1354	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1355
[94]	1356	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1357	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1358
[94]	1359	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1360	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1361
[430]	1362	IF ( i == 10 ) THEN
	1363	EXIT
	1364	ELSE
	1365	i = i + 1
	1366	ENDIF
	1367
[1]	1368	ENDDO
	1369
	1370	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1371	TRIM( gradients ), TRIM( slices )
	1372
	1373	!
	1374	!-- Initial humidity profile
	1375	!-- Building output strings, starting with surface humidity
[75]	1376	IF ( humidity .OR. passive_scalar ) THEN
[1]	1377	WRITE ( temperatures, '(E8.1)' ) q_surface
	1378	gradients = '--------'
	1379	slices = ' 0'
	1380	coordinates = ' 0.0'
	1381	i = 1
	1382	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1383
	1384	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1385	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1386
	1387	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1388	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1389
	1390	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1391	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1392
	1393	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1394	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1395
[430]	1396	IF ( i == 10 ) THEN
	1397	EXIT
	1398	ELSE
	1399	i = i + 1
	1400	ENDIF
	1401
[1]	1402	ENDDO
	1403
[75]	1404	IF ( humidity ) THEN
[1]	1405	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1406	TRIM( gradients ), TRIM( slices )
	1407	ELSE
	1408	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1409	TRIM( gradients ), TRIM( slices )
	1410	ENDIF
	1411	ENDIF
	1412
	1413	!
[97]	1414	!-- Initial salinity profile
	1415	!-- Building output strings, starting with surface salinity
	1416	IF ( ocean ) THEN
	1417	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1418	gradients = '------'
	1419	slices = ' 0'
	1420	coordinates = ' 0.0'
	1421	i = 1
	1422	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1423
	1424	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1425	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1426
	1427	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1428	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1429
	1430	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1431	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1432
	1433	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1434	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1435
[430]	1436	IF ( i == 10 ) THEN
	1437	EXIT
	1438	ELSE
	1439	i = i + 1
	1440	ENDIF
	1441
[97]	1442	ENDDO
	1443
	1444	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1445	TRIM( gradients ), TRIM( slices )
	1446	ENDIF
	1447
	1448	!
[411]	1449	!-- Profile for the large scale vertial velocity
	1450	!-- Building output strings, starting with surface value
	1451	IF ( large_scale_subsidence ) THEN
	1452	temperatures = ' 0.0'
	1453	gradients = '------'
	1454	slices = ' 0'
	1455	coordinates = ' 0.0'
	1456	i = 1
[580]	1457	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1458
	1459	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1460	w_subs(subs_vertical_gradient_level_i(i))
[411]	1461	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1462
[580]	1463	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1464	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1465
[580]	1466	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1467	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1468
[580]	1469	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1470	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1471
[430]	1472	IF ( i == 10 ) THEN
	1473	EXIT
	1474	ELSE
	1475	i = i + 1
	1476	ENDIF
	1477
[411]	1478	ENDDO
	1479
	1480	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1481	TRIM( gradients ), TRIM( slices )
	1482	ENDIF
	1483
	1484	!
[824]	1485	!-- Cloud physcis parameters / quantities / numerical methods
	1486	WRITE ( io, 430 )
	1487	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1488	WRITE ( io, 431 )
	1489	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1490	WRITE ( io, 432 )
	1491	IF ( radiation ) WRITE ( io, 132 )
	1492	IF ( precipitation ) WRITE ( io, 133 )
	1493	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1494	WRITE ( io, 433 )
	1495	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1496	IF ( collision_kernel /= 'none' ) THEN
	1497	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1498	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1499	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1500	ENDIF
[825]	1501	ELSE
[828]	1502	WRITE ( io, 437 )
[825]	1503	ENDIF
[824]	1504	ENDIF
	1505
	1506	!
[1]	1507	!-- LES / turbulence parameters
	1508	WRITE ( io, 450 )
	1509
	1510	!--
	1511	! ... LES-constants used must still be added here
	1512	!--
	1513	IF ( constant_diffusion ) THEN
	1514	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1515	prandtl_number
	1516	ENDIF
	1517	IF ( .NOT. constant_diffusion) THEN
[108]	1518	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1519	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1520	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1521	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1522	ENDIF
	1523
	1524	!
	1525	!-- Special actions during the run
	1526	WRITE ( io, 470 )
	1527	IF ( create_disturbances ) THEN
	1528	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1529	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1530	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1531	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1532	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1533	ELSE
	1534	WRITE ( io, 473 ) disturbance_energy_limit
	1535	ENDIF
	1536	WRITE ( io, 474 ) TRIM( random_generator )
	1537	ENDIF
	1538	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1539	WRITE ( io, 475 ) pt_surface_initial_change
	1540	ENDIF
[75]	1541	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1542	WRITE ( io, 476 ) q_surface_initial_change
	1543	ENDIF
	1544	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1545	WRITE ( io, 477 ) q_surface_initial_change
	1546	ENDIF
	1547
[60]	1548	IF ( particle_advection ) THEN
[1]	1549	!
[60]	1550	!-- Particle attributes
	1551	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1552	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1553	end_time_prel, dt_sort_particles
[60]	1554	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1555	IF ( random_start_position ) WRITE ( io, 481 )
	1556	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1557	WRITE ( io, 495 ) total_number_of_particles
[824]	1558	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1559	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1560	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1561	WRITE ( io, 484 ) total_number_of_tails, &
	1562	minimum_tailpoint_distance, &
	1563	maximum_tailpoint_age
	1564	ENDIF
[1]	1565	ENDIF
[60]	1566	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1567	WRITE ( io, 485 ) dt_write_particle_data
	1568	output_format = ''
	1569	IF ( netcdf_output ) THEN
[493]	1570	IF ( netcdf_data_format > 1 ) THEN
[60]	1571	output_format = 'netcdf (64 bit offset) and binary'
	1572	ELSE
	1573	output_format = 'netcdf and binary'
	1574	ENDIF
[1]	1575	ELSE
[60]	1576	output_format = 'binary'
[1]	1577	ENDIF
[292]	1578	WRITE ( io, 344 ) output_format
[1]	1579	ENDIF
[60]	1580	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1581	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1582
[60]	1583	WRITE ( io, 487 ) number_of_particle_groups
[1]	1584
[60]	1585	DO i = 1, number_of_particle_groups
	1586	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1587	WRITE ( io, 490 ) i, 0.0
	1588	WRITE ( io, 492 )
[1]	1589	ELSE
[60]	1590	WRITE ( io, 490 ) i, radius(i)
	1591	IF ( density_ratio(i) /= 0.0 ) THEN
	1592	WRITE ( io, 491 ) density_ratio(i)
	1593	ELSE
	1594	WRITE ( io, 492 )
	1595	ENDIF
[1]	1596	ENDIF
[60]	1597	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1598	pdx(i), pdy(i), pdz(i)
[336]	1599	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1600	ENDDO
[1]	1601
[60]	1602	ENDIF
[1]	1603
[60]	1604
[1]	1605	!
	1606	!-- Parameters of 1D-model
	1607	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1608	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1609	mixing_length_1d, dissipation_1d
	1610	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1611	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1612	ENDIF
	1613	ENDIF
	1614
	1615	!
	1616	!-- User-defined informations
	1617	CALL user_header( io )
	1618
	1619	WRITE ( io, 99 )
	1620
	1621	!
	1622	!-- Write buffer contents to disc immediately
[82]	1623	CALL local_flush( io )
[1]	1624
	1625	!
	1626	!-- Here the FORMATs start
	1627
	1628	99 FORMAT (1X,78('-'))
[200]	1629	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1630	1X,'* ',A,' *',9X,A/ &
	1631	1X,'***************************',9X,42('-'))
[291]	1632	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1633	37X,42('-'))
[200]	1634	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1635	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1636	' Run on host: ',A10)
[1]	1637	#if defined( __parallel )
[200]	1638	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1639	')',1X,A)
[200]	1640	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1641	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1642	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1643	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1644	37X,'because the job is running on an SMP-cluster')
[102]	1645	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1646	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1647	#endif
	1648	110 FORMAT (/' Numerical Schemes:'/ &
	1649	' -----------------'/)
	1650	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1651	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1652	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1653	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1654	' or Upstream')
	1655	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1656	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1657	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1658	' or Upstream')
	1659	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1660	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1661	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1662	' Translation velocity = ',A/ &
	1663	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1664	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1665	' of timestep changes)')
	1666	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1667	' timestep changes')
	1668	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1669	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1670	' maximum damping coefficient: ',F5.3, ' 1/s')
	1671	124 FORMAT (' Spline-overshoots are being suppressed')
	1672	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1673	' of'/ &
	1674	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1675	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1676	' of'/ &
	1677	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1678	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1679	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1680	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1681	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1682	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1683	130 FORMAT (' --> Additional prognostic equation for the total water content')
[824]	1684	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1685	' effective emissivity scheme')
[824]	1686	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1687	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1688	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1689	A,'-cycle)'/ &
	1690	' number of grid levels: ',I2/ &
	1691	' Gauss-Seidel red/black iterations: ',I2)
	1692	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1693	I3,')')
	1694	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1695	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1696	I3,')'/ &
	1697	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1698	I3,')')
	1699	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1700	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1701	140 FORMAT (' maximum residual allowed: ',E10.3)
	1702	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1703	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1704	'step')
[87]	1705	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1706	'kinetic energy')
[927]	1707	144 FORMAT (' masking method is used')
[1]	1708	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1709	'conserved'/ &
	1710	' using the ',A,' mode')
	1711	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1712	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1713	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1714	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1715	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1716	'prognostic equation for')
	1717	154 FORMAT (' the potential temperature')
[1]	1718	200 FORMAT (//' Run time and time step information:'/ &
	1719	' ----------------------------------'/)
	1720	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1721	' CFL-factor: ',F4.2)
	1722	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1723	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1724	' End time: ',F9.3,' s')
	1725	204 FORMAT ( A,F9.3,' s')
	1726	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1727	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1728	' CPU-time used: ',F9.3,' s per timestep: ', &
	1729	' ',F9.3,' s'/ &
	1730	' per second of simulated tim', &
	1731	'e: ',F9.3,' s')
[291]	1732	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1733	250 FORMAT (//' Computational grid and domain size:'/ &
	1734	' ----------------------------------'// &
	1735	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1736	' m dz = ',F7.3,' m'/ &
	1737	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1738	' m z(u) = ',F10.3,' m'/)
	1739	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1740	' factor: ',F5.3/ &
	1741	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1742	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1743	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1744	255 FORMAT (' Subdomains have equal size')
	1745	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1746	'have smaller sizes'/ &
	1747	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1748	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1749	' degrees')
	1750	270 FORMAT (//' Topography informations:'/ &
	1751	' -----------------------'// &
	1752	1X,'Topography: ',A)
	1753	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1754	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1755	' / ',I4)
[240]	1756	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1757	' direction' / &
	1758	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1759	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1760	278 FORMAT (' Topography grid definition convention:'/ &
	1761	' cell edge (staggered grid points'/ &
	1762	' (u in x-direction, v in y-direction))' /)
	1763	279 FORMAT (' Topography grid definition convention:'/ &
	1764	' cell center (scalar grid points)' /)
[138]	1765	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1766	' ------------------------------'// &
	1767	' Canopy mode: ', A / &
	1768	' Canopy top: ',I4 / &
	1769	' Leaf drag coefficient: ',F6.2 /)
[153]	1770	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1771	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1772	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1773	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1774	' Height: ',A,' m'/ &
	1775	' Leaf area density: ',A,' m2/m3'/ &
	1776	' Gradient: ',A,' m2/m4'/ &
	1777	' Gridpoint: ',A)
	1778
[1]	1779	300 FORMAT (//' Boundary conditions:'/ &
	1780	' -------------------'// &
	1781	' p uv ', &
	1782	' pt'// &
	1783	' B. bound.: ',A/ &
	1784	' T. bound.: ',A)
[97]	1785	301 FORMAT (/' ',A// &
[1]	1786	' B. bound.: ',A/ &
	1787	' T. bound.: ',A)
[19]	1788	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1789	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1790	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1791	'computational u,v-level:'// &
[1]	1792	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1793	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1794	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1795	307 FORMAT (' Heatflux has a random normal distribution')
	1796	308 FORMAT (' Predefined surface temperature')
[97]	1797	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1798	310 FORMAT (//' 1D-Model:'// &
	1799	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1800	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1801	312 FORMAT (' Predefined surface humidity')
	1802	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1803	314 FORMAT (' Predefined scalar value at the surface')
[19]	1804	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1805	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1806	'atmosphere model')
[1]	1807	317 FORMAT (//' Lateral boundaries:'/ &
	1808	' left/right: ',A/ &
	1809	' north/south: ',A)
	1810	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1811	'max =',F5.1,' m**2/s')
[151]	1812	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1813	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1814	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1815	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1816	' v: ',F9.6,' m2/s2')
[151]	1817	325 FORMAT (//' List output:'/ &
[1]	1818	' -----------'// &
	1819	' 1D-Profiles:'/ &
	1820	' Output every ',F8.2,' s')
[151]	1821	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1822	' Averaging input every ',F8.2,' s')
	1823	330 FORMAT (//' Data output:'/ &
	1824	' -----------'/)
	1825	331 FORMAT (/' 1D-Profiles:')
	1826	332 FORMAT (/' ',A)
	1827	333 FORMAT (' Output every ',F8.2,' s',/ &
	1828	' Time averaged over ',F8.2,' s'/ &
	1829	' Averaging input every ',F8.2,' s')
	1830	334 FORMAT (/' 2D-Arrays',A,':')
	1831	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1832	' Output every ',F8.2,' s ',A/ &
	1833	' Cross sections at ',A1,' = ',A/ &
	1834	' scalar-coordinates: ',A,' m'/)
	1835	336 FORMAT (/' 3D-Arrays',A,':')
	1836	337 FORMAT (/' Arrays: ',A/ &
	1837	' Output every ',F8.2,' s ',A/ &
	1838	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1839	338 FORMAT (' Compressed data output'/ &
	1840	' Decimal precision: ',A/)
	1841	339 FORMAT (' No output during initial ',F8.2,' s')
	1842	340 FORMAT (/' Time series:')
	1843	341 FORMAT (' Output every ',F8.2,' s'/)
	1844	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1845	' Output every ',F8.2,' s ',A/ &
	1846	' Time averaged over ',F8.2,' s'/ &
	1847	' Averaging input every ',F8.2,' s'/ &
	1848	' Cross sections at ',A1,' = ',A/ &
	1849	' scalar-coordinates: ',A,' m'/)
	1850	343 FORMAT (/' Arrays: ',A/ &
	1851	' Output every ',F8.2,' s ',A/ &
	1852	' Time averaged over ',F8.2,' s'/ &
	1853	' Averaging input every ',F8.2,' s'/ &
	1854	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1855	344 FORMAT (' Output format: ',A/)
[410]	1856	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1857	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1858	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1859	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1860	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1861	347 FORMAT (' Variables: ',A/ &
	1862	' Output every ',F8.2,' s')
	1863	348 FORMAT (' Variables: ',A/ &
	1864	' Output every ',F8.2,' s'/ &
	1865	' Time averaged over ',F8.2,' s'/ &
	1866	' Averaging input every ',F8.2,' s')
	1867	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1868	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1869	13(' ',8(F8.2,',')/) )
	1870	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1871	'all gridpoints along ',A,'-direction (default).' )
	1872	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1873	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1874	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1875	#if defined( __dvrp_graphics )
	1876	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1877	' Output every ',F7.1,' s'/ &
	1878	' Output mode: ',A/ &
	1879	' Host / User: ',A,' / ',A/ &
	1880	' Directory: ',A// &
	1881	' The sequence contains:')
[337]	1882	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1883	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1884	362 FORMAT (/' Slicer plane ',A/ &
[336]	1885	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1886	363 FORMAT (/' Particles'/ &
[336]	1887	' particle size: ',F7.2,' m')
	1888	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1889	F6.2,',',F6.2,']')
[337]	1890	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1891	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1892	')'/ &
	1893	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1894	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1895	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1896	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1897	#endif
	1898	#if defined( __spectra )
	1899	370 FORMAT (' Spectra:')
	1900	371 FORMAT (' Output every ',F7.1,' s'/)
	1901	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1902	' Directions: ', 10(A5,',')/ &
[189]	1903	' height levels k = ', 20(I3,',')/ &
	1904	' ', 20(I3,',')/ &
	1905	' ', 20(I3,',')/ &
	1906	' ', 20(I3,',')/ &
	1907	' ', 19(I3,','),I3,'.'/ &
[1]	1908	' height levels selected for standard plot:'/ &
[189]	1909	' k = ', 20(I3,',')/ &
	1910	' ', 20(I3,',')/ &
	1911	' ', 20(I3,',')/ &
	1912	' ', 20(I3,',')/ &
	1913	' ', 19(I3,','),I3,'.'/ &
[1]	1914	' Time averaged over ', F7.1, ' s,' / &
	1915	' Profiles for the time averaging are taken every ', &
	1916	F6.1,' s')
	1917	#endif
	1918	400 FORMAT (//' Physical quantities:'/ &
	1919	' -------------------'/)
	1920	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1921	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1922	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1923	' f* = ',F9.6,' 1/s')
	1924	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1925	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1926	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1927	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1928	' ------------------------'/)
[57]	1929	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1930	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1931	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1932	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1933	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1934	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1935	' Height: ',A,' m'/ &
	1936	' Temperature: ',A,' K'/ &
	1937	' Gradient: ',A,' K/100m'/ &
	1938	' Gridpoint: ',A)
	1939	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1940	' Height: ',A,' m'/ &
	1941	' Humidity: ',A,' kg/kg'/ &
	1942	' Gradient: ',A,' (kg/kg)/100m'/ &
	1943	' Gridpoint: ',A)
	1944	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1945	' Height: ',A,' m'/ &
	1946	' Scalar concentration: ',A,' kg/m**3'/ &
	1947	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1948	' Gridpoint: ',A)
	1949	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1950	' Height: ',A,' m'/ &
	1951	' ug: ',A,' m/s'/ &
	1952	' Gradient: ',A,' 1/100s'/ &
	1953	' Gridpoint: ',A)
	1954	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1955	' Height: ',A,' m'/ &
[97]	1956	' vg: ',A,' m/s'/ &
[1]	1957	' Gradient: ',A,' 1/100s'/ &
	1958	' Gridpoint: ',A)
[97]	1959	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1960	' Height: ',A,' m'/ &
	1961	' Salinity: ',A,' psu'/ &
	1962	' Gradient: ',A,' psu/100m'/ &
	1963	' Gridpoint: ',A)
[411]	1964	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1965	' Height: ',A,' m'/ &
	1966	' w_subs: ',A,' m/s'/ &
	1967	' Gradient: ',A,' (m/s)/100m'/ &
	1968	' Gridpoint: ',A)
[767]	1969	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1970	' profiles')
[824]	1971	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1972	' ----------------------------------'/)
	1973	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1974	'on)')
	1975	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1976	' total water content is used.'/ &
	1977	' Condensation is parameterized via 0% - or 100% scheme.')
	1978	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1979	'icle model')
	1980	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1981	' droplets < 1.0E-6 m')
[825]	1982	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1983	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1984	'are used'/ &
	1985	' number of radius classes: ',I3,' interval ', &
	1986	'[1.0E-6,2.0E-4] m'/ &
	1987	' number of dissipation classes: ',I2,' interval ', &
	1988	'[0,1000] cm2/s3')
	1989	437 FORMAT (' Droplet collision is switched off')
[1]	1990	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1991	' ---------------------------'/)
[824]	1992	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1993	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1994	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1995	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1996	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1997	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1998	470 FORMAT (//' Actions during the simulation:'/ &
	1999	' -----------------------------'/)
[94]	2000	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	2001	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	2002	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	2003	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	2004	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	2005	' to i/j =',I4)
	2006	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	2007	1X,F5.3, ' m2/s2')
	2008	474 FORMAT (' Random number generator used : ',A/)
	2009	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	2010	'respectively, if'/ &
	2011	' the value is negative) by ',F5.2,' K at the beginning of the',&
	2012	' 3D-simulation'/)
	2013	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	2014	'respectively, if the'/ &
	2015	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	2016	' the 3D-simulation'/)
	2017	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	2018	'respectively, if the'/ &
	2019	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	2020	' the 3D-simulation'/)
	2021	480 FORMAT (' Particles:'/ &
	2022	' ---------'// &
	2023	' Particle advection is active (switched on at t = ', F7.1, &
	2024	' s)'/ &
	2025	' Start of new particle generations every ',F6.1,' s'/ &
	2026	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	2027	' bottom: ', A, ' top: ', A/&
	2028	' Maximum particle age: ',F9.1,' s'/ &
[117]	2029	' Advection stopped at t = ',F9.1,' s'/ &
	2030	' Particles are sorted every ',F9.1,' s'/)
[1]	2031	481 FORMAT (' Particles have random start positions'/)
[336]	2032	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2033	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2034	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2035	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2036	' Maximum age of the end of the tail: ',F8.2,' s')
	2037	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2038	486 FORMAT (' Particle statistics are written on file'/)
	2039	487 FORMAT (' Number of particle groups: ',I2/)
	2040	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2041	' minimum timestep for advection: ', F7.5/)
	2042	489 FORMAT (' Number of particles simultaneously released at each ', &
	2043	'point: ', I5/)
	2044	490 FORMAT (' Particle group ',I2,':'/ &
	2045	' Particle radius: ',E10.3, 'm')
	2046	491 FORMAT (' Particle inertia is activated'/ &
	2047	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2048	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2049	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2050	' y:',F8.1,' - ',F8.1,' m'/&
	2051	' z:',F8.1,' - ',F8.1,' m'/&
	2052	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2053	' m dz = ',F8.1,' m'/)
	2054	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2055	F8.2,' s'/)
	2056	495 FORMAT (' Number of particles in total domain: ',I10/)
	2057	500 FORMAT (//' 1D-Model parameters:'/ &
	2058	' -------------------'// &
	2059	' Simulation time: ',F8.1,' s'/ &
	2060	' Run-controll output every: ',F8.1,' s'/ &
	2061	' Vertical profile output every: ',F8.1,' s'/ &
	2062	' Mixing length calculation: ',A/ &
	2063	' Dissipation calculation: ',A/)
	2064	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2065	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2066	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2067
	2068
	2069	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |