Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 876

Last change on this file since 876 was 869, checked in by raasch, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.7 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[869]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 869 2012-03-28 12:21:50Z gryschka $
	11	!
[869]	12	! 868 2012-03-28 12:21:07Z raasch
	13	! translation velocity in Galilean transformation changed to 0.6 * ug
	14	!
[834]	15	! 833 2012-02-22 08:55:55Z maronga
	16	! Adjusted format for leaf area density
	17	!
[829]	18	! 828 2012-02-21 12:00:36Z raasch
	19	! output of dissipation_classes + radius_classes
	20	!
[826]	21	! 825 2012-02-19 03:03:44Z raasch
	22	! Output of cloud physics parameters/quantities complemented and restructured
	23	!
[768]	24	! 767 2011-10-14 06:39:12Z raasch
	25	! Output of given initial u,v-profiles
	26	!
[760]	27	! 759 2011-09-15 13:58:31Z raasch
	28	! output of maximum number of parallel io streams
	29	!
[708]	30	! 707 2011-03-29 11:39:40Z raasch
	31	! bc_lr/ns replaced by bc_lr/ns_cyc
	32	!
[668]	33	! 667 2010-12-23 12:06:00Z suehring/gryschka
	34	! Output of advection scheme.
	35	! Modified output of Prandtl-layer height.
	36	!
[581]	37	! 580 2010-10-05 13:59:11Z heinze
	38	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	39	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	40	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	41	!
[494]	42	! 493 2010-03-01 08:30:24Z raasch
	43	! NetCDF data output format extendend for NetCDF4/HDF5
	44	!
[482]	45	! 449 2010-02-02 11:23:59Z raasch
	46	! +large scale vertical motion (subsidence/ascent)
	47	! Bugfix: index problem concerning gradient_level indices removed
	48	!
[449]	49	! 410 2009-12-04 17:05:40Z letzel
	50	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	51	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	52	!
[392]	53	! 346 2009-07-06 10:13:41Z raasch
[328]	54	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	55	! Coupling with independent precursor runs.
[254]	56	! Output of messages replaced by message handling routine.
[336]	57	! Output of several additional dvr parameters
[240]	58	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	59	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	60	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	61	! topography_grid_convention moved from user_header
[292]	62	! small bugfix concerning 3d 64bit netcdf output format
[1]	63	!
[226]	64	! 206 2008-10-13 14:59:11Z raasch
	65	! Bugfix: error in zu index in case of section_xy = -1
	66	!
[200]	67	! 198 2008-09-17 08:55:28Z raasch
	68	! Format adjustments allowing output of larger revision numbers
	69	!
[198]	70	! 197 2008-09-16 15:29:03Z raasch
	71	! allow 100 spectra levels instead of 10 for consistency with
	72	! define_netcdf_header,
	73	! bugfix in the output of the characteristic levels of potential temperature,
	74	! geostrophic wind, scalar concentration, humidity and leaf area density,
	75	! output of turbulence recycling informations
	76	!
[139]	77	! 138 2007-11-28 10:03:58Z letzel
	78	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	79	! Allow two instead of one digit to specify isosurface and slicer variables.
	80	! Output of sorting frequency of particles
	81	!
[110]	82	! 108 2007-08-24 15:10:38Z letzel
	83	! Output of informations for coupled model runs (boundary conditions etc.)
	84	! + output of momentumfluxes at the top boundary
	85	! Rayleigh damping for ocean, e_init
	86	!
[98]	87	! 97 2007-06-21 08:23:15Z raasch
	88	! Adjustments for the ocean version.
	89	! use_pt_reference renamed use_reference
	90	!
[90]	91	! 87 2007-05-22 15:46:47Z raasch
	92	! Bugfix: output of use_upstream_for_tke
	93	!
[83]	94	! 82 2007-04-16 15:40:52Z raasch
	95	! Preprocessor strings for different linux clusters changed to "lc",
	96	! routine local_flush is used for buffer flushing
	97	!
[77]	98	! 76 2007-03-29 00:58:32Z raasch
	99	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	100	! output of the loop optimization method, moisture renamed humidity,
	101	! output of subversion revision number
	102	!
[39]	103	! 19 2007-02-23 04:53:48Z raasch
	104	! Output of scalar flux applied at top boundary
	105	!
[3]	106	! RCS Log replace by Id keyword, revision history cleaned up
	107	!
[1]	108	! Revision 1.63 2006/08/22 13:53:13 raasch
	109	! Output of dz_max
	110	!
	111	! Revision 1.1 1997/08/11 06:17:20 raasch
	112	! Initial revision
	113	!
	114	!
	115	! Description:
	116	! ------------
	117	! Writing a header with all important informations about the actual run.
	118	! This subroutine is called three times, two times at the beginning
	119	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	120	! end of the run, then writing additional information about CPU-usage on file
	121	! header.
[411]	122	!-----------------------------------------------------------------------------!
[1]	123
	124	USE arrays_3d
	125	USE control_parameters
	126	USE cloud_parameters
	127	USE cpulog
	128	USE dvrp_variables
	129	USE grid_variables
	130	USE indices
	131	USE model_1d
	132	USE particle_attributes
	133	USE pegrid
[411]	134	USE subsidence_mod
[1]	135	USE spectrum
	136
	137	IMPLICIT NONE
	138
	139	CHARACTER (LEN=1) :: prec
	140	CHARACTER (LEN=2) :: do2d_mode
	141	CHARACTER (LEN=5) :: section_chr
	142	CHARACTER (LEN=9) :: time_to_string
	143	CHARACTER (LEN=10) :: coor_chr, host_chr
	144	CHARACTER (LEN=16) :: begin_chr
[200]	145	CHARACTER (LEN=23) :: ver_rev
[1]	146	CHARACTER (LEN=40) :: output_format
[167]	147	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	148	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	149	domask_chr, run_classification
[167]	150	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	151	temperatures, ugcomponent, vgcomponent
[1]	152	CHARACTER (LEN=85) :: roben, runten
	153
[410]	154	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	155
	156	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	157	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	158	REAL :: cpuseconds_per_simulated_second
	159
	160	!
	161	!-- Open the output file. At the end of the simulation, output is directed
	162	!-- to unit 19.
	163	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	164	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	165	io = 15 ! header output on file RUN_CONTROL
	166	ELSE
	167	io = 19 ! header output on file HEADER
	168	ENDIF
	169	CALL check_open( io )
	170
	171	!
	172	!-- At the end of the run, output file (HEADER) will be rewritten with
	173	!-- new informations
	174	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	175
	176	!
	177	!-- Determine kind of model run
	178	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	179	run_classification = '3D - restart run'
[328]	180	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	181	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	182	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	183	run_classification = '3D - run without 1D - prerun'
[197]	184	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	185	run_classification = '3D - run with 1D - prerun'
[197]	186	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	187	run_classification = '3D - run initialized by user'
[1]	188	ELSE
[254]	189	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	190	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	191	ENDIF
[97]	192	IF ( ocean ) THEN
	193	run_classification = 'ocean - ' // run_classification
	194	ELSE
	195	run_classification = 'atmosphere - ' // run_classification
	196	ENDIF
[1]	197
	198	!
	199	!-- Run-identification, date, time, host
	200	host_chr = host(1:10)
[75]	201	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	202	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	203	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	204	#if defined( __mpi2 )
	205	mpi_type = 2
	206	#else
	207	mpi_type = 1
	208	#endif
	209	WRITE ( io, 101 ) mpi_type, coupling_mode
	210	ENDIF
[102]	211	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	212	ADJUSTR( host_chr )
[1]	213	#if defined( __parallel )
	214	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	215	char1 = 'calculated'
	216	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	217	host(1:2) == 'lc' ) .AND. &
	218	npex == -1 .AND. pdims(2) == 1 ) THEN
	219	char1 = 'forced'
	220	ELSE
	221	char1 = 'predefined'
	222	ENDIF
	223	IF ( threads_per_task == 1 ) THEN
[102]	224	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	225	ELSE
[102]	226	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	227	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	228	ENDIF
	229	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	230	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	231	npex == -1 .AND. pdims(2) == 1 ) &
	232	THEN
[102]	233	WRITE ( io, 106 )
[1]	234	ELSEIF ( pdims(2) == 1 ) THEN
[102]	235	WRITE ( io, 107 ) 'x'
[1]	236	ELSEIF ( pdims(1) == 1 ) THEN
[102]	237	WRITE ( io, 107 ) 'y'
[1]	238	ENDIF
[102]	239	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	240	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	241	WRITE ( io, 108 ) maximum_parallel_io_streams
	242	ENDIF
[1]	243	#endif
	244	WRITE ( io, 99 )
	245
	246	!
	247	!-- Numerical schemes
	248	WRITE ( io, 110 )
	249	IF ( psolver(1:7) == 'poisfft' ) THEN
	250	WRITE ( io, 111 ) TRIM( fft_method )
	251	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	252	ELSEIF ( psolver == 'sor' ) THEN
	253	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	254	ELSEIF ( psolver == 'multigrid' ) THEN
	255	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	256	IF ( mg_cycles == -1 ) THEN
	257	WRITE ( io, 140 ) residual_limit
	258	ELSE
	259	WRITE ( io, 141 ) mg_cycles
	260	ENDIF
	261	IF ( mg_switch_to_pe0_level == 0 ) THEN
	262	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	263	nzt_mg(1)
[197]	264	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	265	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	266	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	267	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	268	nzt_mg(mg_switch_to_pe0_level), &
	269	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	270	nzt_mg(1)
	271	ENDIF
	272	ENDIF
	273	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	274	THEN
	275	WRITE ( io, 142 )
	276	ENDIF
	277
	278	IF ( momentum_advec == 'pw-scheme' ) THEN
	279	WRITE ( io, 113 )
[667]	280	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	281	WRITE ( io, 503 )
	282	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	283	WRITE ( io, 114 )
	284	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	285	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	286	overshoot_limit_w /= 0.0 ) THEN
	287	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	288	overshoot_limit_w
	289	ENDIF
	290	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	291	ups_limit_w /= 0.0 ) &
	292	THEN
	293	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	294	ENDIF
	295	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	296	ENDIF
	297	IF ( scalar_advec == 'pw-scheme' ) THEN
	298	WRITE ( io, 116 )
[667]	299	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	300	WRITE ( io, 504 )
[1]	301	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	302	WRITE ( io, 117 )
	303	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	304	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	305	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	306	ENDIF
	307	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	308	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	309	ENDIF
	310	ELSE
	311	WRITE ( io, 118 )
	312	ENDIF
[63]	313
	314	WRITE ( io, 139 ) TRIM( loop_optimization )
	315
[1]	316	IF ( galilei_transformation ) THEN
	317	IF ( use_ug_for_galilei_tr ) THEN
[868]	318	char1 = '0.6 * geostrophic wind'
[1]	319	ELSE
	320	char1 = 'mean wind in model domain'
	321	ENDIF
	322	IF ( simulated_time_at_begin == simulated_time ) THEN
	323	char2 = 'at the start of the run'
	324	ELSE
	325	char2 = 'at the end of the run'
	326	ENDIF
	327	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	328	advected_distance_x/1000.0, advected_distance_y/1000.0
	329	ENDIF
	330	IF ( timestep_scheme == 'leapfrog' ) THEN
	331	WRITE ( io, 120 )
	332	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	333	WRITE ( io, 121 )
	334	ELSE
	335	WRITE ( io, 122 ) timestep_scheme
	336	ENDIF
[87]	337	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	338	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	339	IF ( .NOT. ocean ) THEN
	340	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	341	rayleigh_damping_factor
	342	ELSE
	343	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	344	rayleigh_damping_factor
	345	ENDIF
[1]	346	ENDIF
[75]	347	IF ( humidity ) THEN
[1]	348	IF ( .NOT. cloud_physics ) THEN
	349	WRITE ( io, 129 )
	350	ELSE
	351	WRITE ( io, 130 )
	352	ENDIF
	353	ENDIF
	354	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	355	IF ( conserve_volume_flow ) THEN
[241]	356	WRITE ( io, 150 ) conserve_volume_flow_mode
	357	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	358	WRITE ( io, 151 ) u_bulk, v_bulk
	359	ENDIF
[240]	360	ELSEIF ( dp_external ) THEN
	361	IF ( dp_smooth ) THEN
[241]	362	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	363	ELSE
[241]	364	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	365	ENDIF
	366	ENDIF
[411]	367	IF ( large_scale_subsidence ) THEN
	368	WRITE ( io, 153 )
	369	WRITE ( io, 154 )
	370	ENDIF
[1]	371	WRITE ( io, 99 )
	372
	373	!
	374	!-- Runtime and timestep informations
	375	WRITE ( io, 200 )
	376	IF ( .NOT. dt_fixed ) THEN
	377	WRITE ( io, 201 ) dt_max, cfl_factor
	378	ELSE
	379	WRITE ( io, 202 ) dt
	380	ENDIF
	381	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	382
	383	IF ( time_restart /= 9999999.9 .AND. &
	384	simulated_time_at_begin == simulated_time ) THEN
	385	IF ( dt_restart == 9999999.9 ) THEN
	386	WRITE ( io, 204 ) ' Restart at: ',time_restart
	387	ELSE
	388	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	389	ENDIF
	390	ENDIF
	391
	392	IF ( simulated_time_at_begin /= simulated_time ) THEN
	393	i = MAX ( log_point_s(10)%counts, 1 )
	394	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	395	cpuseconds_per_simulated_second = 0.0
	396	ELSE
	397	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	398	( simulated_time - &
	399	simulated_time_at_begin )
	400	ENDIF
	401	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	402	log_point_s(10)%sum / REAL( i ), &
	403	cpuseconds_per_simulated_second
	404	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	405	IF ( dt_restart == 9999999.9 ) THEN
	406	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	407	ELSE
	408	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	409	ENDIF
	410	ENDIF
	411	ENDIF
	412
	413	!
[291]	414	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	415	!-- and ocean are used. In this case, coupling_start_time defines the time
	416	!-- when the coupling is switched on.
	417	IF ( coupling_start_time /= 0.0 ) THEN
	418	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	419	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	420	ELSE
	421	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	422	'precursor runs'
	423	ENDIF
	424	WRITE ( io, 207 ) char1, coupling_start_time
	425	ENDIF
	426
	427	!
[1]	428	!-- Computational grid
[94]	429	IF ( .NOT. ocean ) THEN
	430	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	431	IF ( dz_stretch_level_index < nzt+1 ) THEN
	432	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	433	dz_stretch_factor, dz_max
	434	ENDIF
	435	ELSE
	436	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	437	IF ( dz_stretch_level_index > 0 ) THEN
	438	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	439	dz_stretch_factor, dz_max
	440	ENDIF
[1]	441	ENDIF
	442	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	443	MIN( nnz+2, nzt+2 )
[76]	444	IF ( numprocs > 1 ) THEN
	445	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	446	WRITE ( io, 255 )
	447	ELSE
	448	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	449	ENDIF
[1]	450	ENDIF
	451	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	452
	453	!
	454	!-- Topography
	455	WRITE ( io, 270 ) topography
	456	SELECT CASE ( TRIM( topography ) )
	457
	458	CASE ( 'flat' )
	459	! no actions necessary
	460
	461	CASE ( 'single_building' )
	462	blx = INT( building_length_x / dx )
	463	bly = INT( building_length_y / dy )
	464	bh = INT( building_height / dz )
	465
	466	IF ( building_wall_left == 9999999.9 ) THEN
	467	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	468	ENDIF
	469	bxl = INT ( building_wall_left / dx + 0.5 )
	470	bxr = bxl + blx
	471
	472	IF ( building_wall_south == 9999999.9 ) THEN
	473	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	474	ENDIF
	475	bys = INT ( building_wall_south / dy + 0.5 )
	476	byn = bys + bly
	477
	478	WRITE ( io, 271 ) building_length_x, building_length_y, &
	479	building_height, bxl, bxr, bys, byn
	480
[240]	481	CASE ( 'single_street_canyon' )
	482	ch = NINT( canyon_height / dz )
	483	IF ( canyon_width_x /= 9999999.9 ) THEN
	484	!
	485	!-- Street canyon in y direction
	486	cwx = NINT( canyon_width_x / dx )
	487	IF ( canyon_wall_left == 9999999.9 ) THEN
	488	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	489	ENDIF
	490	cxl = NINT( canyon_wall_left / dx )
	491	cxr = cxl + cwx
	492	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	493
	494	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	495	!
	496	!-- Street canyon in x direction
	497	cwy = NINT( canyon_width_y / dy )
	498	IF ( canyon_wall_south == 9999999.9 ) THEN
	499	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	500	ENDIF
	501	cys = NINT( canyon_wall_south / dy )
	502	cyn = cys + cwy
	503	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	504	ENDIF
	505
[1]	506	END SELECT
	507
[256]	508	IF ( TRIM( topography ) /= 'flat' ) THEN
	509	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	510	IF ( TRIM( topography ) == 'single_building' .OR. &
	511	TRIM( topography ) == 'single_street_canyon' ) THEN
	512	WRITE ( io, 278 )
	513	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	514	WRITE ( io, 279 )
	515	ENDIF
	516	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	517	WRITE ( io, 278 )
	518	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	519	WRITE ( io, 279 )
	520	ENDIF
	521	ENDIF
	522
[138]	523	IF ( plant_canopy ) THEN
	524
	525	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	526	IF ( passive_scalar ) THEN
	527	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	528	leaf_surface_concentration
	529	ENDIF
[138]	530
[1]	531	!
[153]	532	!-- Heat flux at the top of vegetation
	533	WRITE ( io, 282 ) cthf
	534
	535	!
[138]	536	!-- Leaf area density profile
	537	!-- Building output strings, starting with surface value
[833]	538	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	539	gradients = '------'
	540	slices = ' 0'
	541	coordinates = ' 0.0'
	542	i = 1
	543	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	544
	545	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	546	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	547
	548	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	549	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	550
	551	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	552	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	553
	554	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	555	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	556
	557	i = i + 1
	558	ENDDO
	559
[153]	560	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	561	TRIM( gradients ), TRIM( slices )
	562
	563	ENDIF
	564
	565	!
[1]	566	!-- Boundary conditions
	567	IF ( ibc_p_b == 0 ) THEN
	568	runten = 'p(0) = 0 \|'
	569	ELSEIF ( ibc_p_b == 1 ) THEN
	570	runten = 'p(0) = p(1) \|'
	571	ELSE
	572	runten = 'p(0) = p(1) +R\|'
	573	ENDIF
	574	IF ( ibc_p_t == 0 ) THEN
	575	roben = 'p(nzt+1) = 0 \|'
	576	ELSE
	577	roben = 'p(nzt+1) = p(nzt) \|'
	578	ENDIF
	579
	580	IF ( ibc_uv_b == 0 ) THEN
	581	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	582	ELSE
	583	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	584	ENDIF
[132]	585	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	586	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	587	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	588	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	589	ELSE
	590	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	591	ENDIF
	592
	593	IF ( ibc_pt_b == 0 ) THEN
	594	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	595	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	596	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	597	ELSEIF ( ibc_pt_b == 2 ) THEN
	598	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	599	ENDIF
	600	IF ( ibc_pt_t == 0 ) THEN
[19]	601	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	602	ELSEIF( ibc_pt_t == 1 ) THEN
	603	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	604	ELSEIF( ibc_pt_t == 2 ) THEN
	605	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	606
[1]	607	ENDIF
	608
	609	WRITE ( io, 300 ) runten, roben
	610
	611	IF ( .NOT. constant_diffusion ) THEN
	612	IF ( ibc_e_b == 1 ) THEN
	613	runten = 'e(0) = e(1)'
	614	ELSE
	615	runten = 'e(0) = e(1) = (u/0.1)*2'
	616	ENDIF
	617	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	618
[97]	619	WRITE ( io, 301 ) 'e', runten, roben
[1]	620
	621	ENDIF
	622
[97]	623	IF ( ocean ) THEN
	624	runten = 'sa(0) = sa(1)'
	625	IF ( ibc_sa_t == 0 ) THEN
	626	roben = 'sa(nzt+1) = sa_surface'
[1]	627	ELSE
[97]	628	roben = 'sa(nzt+1) = sa(nzt)'
[1]	629	ENDIF
[97]	630	WRITE ( io, 301 ) 'sa', runten, roben
	631	ENDIF
[1]	632
[97]	633	IF ( humidity ) THEN
	634	IF ( ibc_q_b == 0 ) THEN
	635	runten = 'q(0) = q_surface'
	636	ELSE
	637	runten = 'q(0) = q(1)'
	638	ENDIF
	639	IF ( ibc_q_t == 0 ) THEN
	640	roben = 'q(nzt) = q_top'
	641	ELSE
	642	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	643	ENDIF
	644	WRITE ( io, 301 ) 'q', runten, roben
	645	ENDIF
[1]	646
[97]	647	IF ( passive_scalar ) THEN
	648	IF ( ibc_q_b == 0 ) THEN
	649	runten = 's(0) = s_surface'
	650	ELSE
	651	runten = 's(0) = s(1)'
	652	ENDIF
	653	IF ( ibc_q_t == 0 ) THEN
	654	roben = 's(nzt) = s_top'
	655	ELSE
	656	roben = 's(nzt) = s(nzt-1) + ds/dz'
	657	ENDIF
	658	WRITE ( io, 301 ) 's', runten, roben
[1]	659	ENDIF
	660
	661	IF ( use_surface_fluxes ) THEN
	662	WRITE ( io, 303 )
	663	IF ( constant_heatflux ) THEN
	664	WRITE ( io, 306 ) surface_heatflux
	665	IF ( random_heatflux ) WRITE ( io, 307 )
	666	ENDIF
[75]	667	IF ( humidity .AND. constant_waterflux ) THEN
[1]	668	WRITE ( io, 311 ) surface_waterflux
	669	ENDIF
	670	IF ( passive_scalar .AND. constant_waterflux ) THEN
	671	WRITE ( io, 313 ) surface_waterflux
	672	ENDIF
	673	ENDIF
	674
[19]	675	IF ( use_top_fluxes ) THEN
	676	WRITE ( io, 304 )
[102]	677	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	678	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	679	IF ( constant_top_heatflux ) THEN
	680	WRITE ( io, 306 ) top_heatflux
	681	ENDIF
	682	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	683	WRITE ( io, 316 )
[19]	684	ENDIF
[97]	685	IF ( ocean .AND. constant_top_salinityflux ) THEN
	686	WRITE ( io, 309 ) top_salinityflux
	687	ENDIF
[75]	688	IF ( humidity .OR. passive_scalar ) THEN
[19]	689	WRITE ( io, 315 )
	690	ENDIF
	691	ENDIF
	692
[1]	693	IF ( prandtl_layer ) THEN
[667]	694	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	695	rif_min, rif_max
[1]	696	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	697	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	698	WRITE ( io, 312 )
	699	ENDIF
	700	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	701	WRITE ( io, 314 )
	702	ENDIF
	703	ELSE
	704	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	705	WRITE ( io, 310 ) rif_min, rif_max
	706	ENDIF
	707	ENDIF
	708
	709	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	710	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	711	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	712	IF ( turbulent_inflow ) THEN
	713	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	714	inflow_damping_height, inflow_damping_width
	715	ENDIF
[1]	716	ENDIF
	717
	718	!
	719	!-- Listing of 1D-profiles
[151]	720	WRITE ( io, 325 ) dt_dopr_listing
[1]	721	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	722	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	723	ENDIF
	724
	725	!
	726	!-- DATA output
	727	WRITE ( io, 330 )
	728	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	729	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	730	ENDIF
	731
	732	!
	733	!-- 1D-profiles
[346]	734	dopr_chr = 'Profile:'
[1]	735	IF ( dopr_n /= 0 ) THEN
	736	WRITE ( io, 331 )
	737
	738	output_format = ''
	739	IF ( netcdf_output ) THEN
[493]	740	IF ( netcdf_data_format == 1 ) THEN
	741	output_format = 'NetCDF classic'
[1]	742	ELSE
[493]	743	output_format = 'NetCDF 64bit offset'
[1]	744	ENDIF
	745	ENDIF
	746	IF ( profil_output ) THEN
	747	IF ( netcdf_output ) THEN
	748	output_format = TRIM( output_format ) // ' and profil'
	749	ELSE
	750	output_format = 'profil'
	751	ENDIF
	752	ENDIF
[292]	753	WRITE ( io, 344 ) output_format
[1]	754
	755	DO i = 1, dopr_n
	756	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	757	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	758	WRITE ( io, 332 ) dopr_chr
	759	dopr_chr = ' :'
	760	ENDIF
	761	ENDDO
	762
	763	IF ( dopr_chr /= '' ) THEN
	764	WRITE ( io, 332 ) dopr_chr
	765	ENDIF
	766	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	767	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	768	ENDIF
	769
	770	!
	771	!-- 2D-arrays
	772	DO av = 0, 1
	773
	774	i = 1
	775	do2d_xy = ''
	776	do2d_xz = ''
	777	do2d_yz = ''
	778	DO WHILE ( do2d(av,i) /= ' ' )
	779
	780	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	781	do2d_mode = do2d(av,i)(l-1:l)
	782
	783	SELECT CASE ( do2d_mode )
	784	CASE ( 'xy' )
	785	ll = LEN_TRIM( do2d_xy )
	786	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	787	CASE ( 'xz' )
	788	ll = LEN_TRIM( do2d_xz )
	789	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	790	CASE ( 'yz' )
	791	ll = LEN_TRIM( do2d_yz )
	792	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	793	END SELECT
	794
	795	i = i + 1
	796
	797	ENDDO
	798
	799	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	800	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	801	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	802	( netcdf_output .OR. iso2d_output ) ) THEN
	803
	804	IF ( av == 0 ) THEN
	805	WRITE ( io, 334 ) ''
	806	ELSE
	807	WRITE ( io, 334 ) '(time-averaged)'
	808	ENDIF
	809
	810	IF ( do2d_at_begin ) THEN
	811	begin_chr = 'and at the start'
	812	ELSE
	813	begin_chr = ''
	814	ENDIF
	815
	816	output_format = ''
	817	IF ( netcdf_output ) THEN
[493]	818	IF ( netcdf_data_format == 1 ) THEN
	819	output_format = 'NetCDF classic'
	820	ELSEIF ( netcdf_data_format == 2 ) THEN
	821	output_format = 'NetCDF 64bit offset'
	822	ELSEIF ( netcdf_data_format == 3 ) THEN
	823	output_format = 'NetCDF4/HDF5'
	824	ELSEIF ( netcdf_data_format == 4 ) THEN
	825	output_format = 'NetCDF4/HDF5 clasic'
[1]	826	ENDIF
	827	ENDIF
	828	IF ( iso2d_output ) THEN
	829	IF ( netcdf_output ) THEN
	830	output_format = TRIM( output_format ) // ' and iso2d'
	831	ELSE
	832	output_format = 'iso2d'
	833	ENDIF
	834	ENDIF
[292]	835	WRITE ( io, 344 ) output_format
[1]	836
	837	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	838	i = 1
	839	slices = '/'
	840	coordinates = '/'
	841	!
	842	!-- Building strings with index and coordinate informations of the
	843	!-- slices
	844	DO WHILE ( section(i,1) /= -9999 )
	845
	846	WRITE (section_chr,'(I5)') section(i,1)
	847	section_chr = ADJUSTL( section_chr )
	848	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	849
[206]	850	IF ( section(i,1) == -1 ) THEN
	851	WRITE (coor_chr,'(F10.1)') -1.0
	852	ELSE
	853	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	854	ENDIF
[1]	855	coor_chr = ADJUSTL( coor_chr )
	856	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	857
	858	i = i + 1
	859	ENDDO
	860	IF ( av == 0 ) THEN
	861	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	862	TRIM( begin_chr ), 'k', TRIM( slices ), &
	863	TRIM( coordinates )
	864	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	865	WRITE ( io, 339 ) skip_time_do2d_xy
	866	ENDIF
	867	ELSE
	868	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	869	TRIM( begin_chr ), averaging_interval, &
	870	dt_averaging_input, 'k', TRIM( slices ), &
	871	TRIM( coordinates )
	872	IF ( skip_time_data_output_av /= 0.0 ) THEN
	873	WRITE ( io, 339 ) skip_time_data_output_av
	874	ENDIF
	875	ENDIF
	876
	877	ENDIF
	878
	879	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	880	i = 1
	881	slices = '/'
	882	coordinates = '/'
	883	!
	884	!-- Building strings with index and coordinate informations of the
	885	!-- slices
	886	DO WHILE ( section(i,2) /= -9999 )
	887
	888	WRITE (section_chr,'(I5)') section(i,2)
	889	section_chr = ADJUSTL( section_chr )
	890	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	891
	892	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	893	coor_chr = ADJUSTL( coor_chr )
	894	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	895
	896	i = i + 1
	897	ENDDO
	898	IF ( av == 0 ) THEN
	899	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	900	TRIM( begin_chr ), 'j', TRIM( slices ), &
	901	TRIM( coordinates )
	902	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	903	WRITE ( io, 339 ) skip_time_do2d_xz
	904	ENDIF
	905	ELSE
	906	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	907	TRIM( begin_chr ), averaging_interval, &
	908	dt_averaging_input, 'j', TRIM( slices ), &
	909	TRIM( coordinates )
	910	IF ( skip_time_data_output_av /= 0.0 ) THEN
	911	WRITE ( io, 339 ) skip_time_data_output_av
	912	ENDIF
	913	ENDIF
	914	ENDIF
	915
	916	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	917	i = 1
	918	slices = '/'
	919	coordinates = '/'
	920	!
	921	!-- Building strings with index and coordinate informations of the
	922	!-- slices
	923	DO WHILE ( section(i,3) /= -9999 )
	924
	925	WRITE (section_chr,'(I5)') section(i,3)
	926	section_chr = ADJUSTL( section_chr )
	927	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	928
	929	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	930	coor_chr = ADJUSTL( coor_chr )
	931	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	932
	933	i = i + 1
	934	ENDDO
	935	IF ( av == 0 ) THEN
	936	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	937	TRIM( begin_chr ), 'i', TRIM( slices ), &
	938	TRIM( coordinates )
	939	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	940	WRITE ( io, 339 ) skip_time_do2d_yz
	941	ENDIF
	942	ELSE
	943	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	944	TRIM( begin_chr ), averaging_interval, &
	945	dt_averaging_input, 'i', TRIM( slices ), &
	946	TRIM( coordinates )
	947	IF ( skip_time_data_output_av /= 0.0 ) THEN
	948	WRITE ( io, 339 ) skip_time_data_output_av
	949	ENDIF
	950	ENDIF
	951	ENDIF
	952
	953	ENDIF
	954
	955	ENDDO
	956
	957	!
	958	!-- 3d-arrays
	959	DO av = 0, 1
	960
	961	i = 1
	962	do3d_chr = ''
	963	DO WHILE ( do3d(av,i) /= ' ' )
	964
	965	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	966	i = i + 1
	967
	968	ENDDO
	969
	970	IF ( do3d_chr /= '' ) THEN
	971	IF ( av == 0 ) THEN
	972	WRITE ( io, 336 ) ''
	973	ELSE
	974	WRITE ( io, 336 ) '(time-averaged)'
	975	ENDIF
	976
	977	output_format = ''
	978	IF ( netcdf_output ) THEN
[493]	979	IF ( netcdf_data_format == 1 ) THEN
	980	output_format = 'NetCDF classic'
	981	ELSEIF ( netcdf_data_format == 2 ) THEN
	982	output_format = 'NetCDF 64bit offset'
	983	ELSEIF ( netcdf_data_format == 3 ) THEN
	984	output_format = 'NetCDF4/HDF5'
	985	ELSEIF ( netcdf_data_format == 4 ) THEN
	986	output_format = 'NetCDF4/HDF5 clasic'
[1]	987	ENDIF
	988	ENDIF
	989	IF ( avs_output ) THEN
	990	IF ( netcdf_output ) THEN
	991	output_format = TRIM( output_format ) // ' and avs'
	992	ELSE
	993	output_format = 'avs'
	994	ENDIF
	995	ENDIF
[292]	996	WRITE ( io, 344 ) output_format
[1]	997
	998	IF ( do3d_at_begin ) THEN
	999	begin_chr = 'and at the start'
	1000	ELSE
	1001	begin_chr = ''
	1002	ENDIF
	1003	IF ( av == 0 ) THEN
	1004	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1005	zu(nz_do3d), nz_do3d
	1006	ELSE
	1007	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1008	TRIM( begin_chr ), averaging_interval, &
	1009	dt_averaging_input, zu(nz_do3d), nz_do3d
	1010	ENDIF
	1011
	1012	IF ( do3d_compress ) THEN
	1013	do3d_chr = ''
	1014	i = 1
	1015	DO WHILE ( do3d(av,i) /= ' ' )
	1016
	1017	SELECT CASE ( do3d(av,i) )
	1018	CASE ( 'u' )
	1019	j = 1
	1020	CASE ( 'v' )
	1021	j = 2
	1022	CASE ( 'w' )
	1023	j = 3
	1024	CASE ( 'p' )
	1025	j = 4
	1026	CASE ( 'pt' )
	1027	j = 5
	1028	END SELECT
	1029	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1030	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1031	':' // prec // ','
	1032	i = i + 1
	1033
	1034	ENDDO
	1035	WRITE ( io, 338 ) do3d_chr
	1036
	1037	ENDIF
	1038
	1039	IF ( av == 0 ) THEN
	1040	IF ( skip_time_do3d /= 0.0 ) THEN
	1041	WRITE ( io, 339 ) skip_time_do3d
	1042	ENDIF
	1043	ELSE
	1044	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1045	WRITE ( io, 339 ) skip_time_data_output_av
	1046	ENDIF
	1047	ENDIF
	1048
	1049	ENDIF
	1050
	1051	ENDDO
	1052
	1053	!
[410]	1054	!-- masked arrays
	1055	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1056	mask_scale_x, mask_scale_y, mask_scale_z
	1057	DO mid = 1, masks
	1058	DO av = 0, 1
	1059
	1060	i = 1
	1061	domask_chr = ''
	1062	DO WHILE ( domask(mid,av,i) /= ' ' )
	1063	domask_chr = TRIM( domask_chr ) // ' ' // &
	1064	TRIM( domask(mid,av,i) ) // ','
	1065	i = i + 1
	1066	ENDDO
	1067
	1068	IF ( domask_chr /= '' ) THEN
	1069	IF ( av == 0 ) THEN
	1070	WRITE ( io, 346 ) '', mid
	1071	ELSE
	1072	WRITE ( io, 346 ) ' (time-averaged)', mid
	1073	ENDIF
	1074
	1075	output_format = ''
	1076	IF ( netcdf_output ) THEN
[493]	1077	IF ( netcdf_data_format == 1 ) THEN
	1078	output_format = 'NetCDF classic'
	1079	ELSEIF ( netcdf_data_format == 2 ) THEN
	1080	output_format = 'NetCDF 64bit offset'
	1081	ELSEIF ( netcdf_data_format == 3 ) THEN
	1082	output_format = 'NetCDF4/HDF5'
	1083	ELSEIF ( netcdf_data_format == 4 ) THEN
	1084	output_format = 'NetCDF4/HDF5 clasic'
	1085	ENDIF
[410]	1086	ENDIF
	1087	WRITE ( io, 344 ) output_format
	1088
	1089	IF ( av == 0 ) THEN
	1090	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1091	ELSE
	1092	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1093	averaging_interval, dt_averaging_input
	1094	ENDIF
	1095
	1096	IF ( av == 0 ) THEN
	1097	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1098	WRITE ( io, 339 ) skip_time_domask(mid)
	1099	ENDIF
	1100	ELSE
	1101	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1102	WRITE ( io, 339 ) skip_time_data_output_av
	1103	ENDIF
	1104	ENDIF
	1105	!
	1106	!-- output locations
	1107	DO dim = 1, 3
	1108	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1109	count = 0
	1110	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1111	count = count + 1
	1112	ENDDO
	1113	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1114	mask(mid,dim,:count)
	1115	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1116	mask_loop(mid,dim,2) < 0.0 .AND. &
	1117	mask_loop(mid,dim,3) == 0.0 ) THEN
	1118	WRITE ( io, 350 ) dir(dim), dir(dim)
	1119	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1120	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1121	mask_loop(mid,dim,1:2)
	1122	ELSE
	1123	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1124	mask_loop(mid,dim,1:3)
	1125	ENDIF
	1126	ENDDO
	1127	ENDIF
	1128
	1129	ENDDO
	1130	ENDDO
	1131
	1132	!
[1]	1133	!-- Timeseries
	1134	IF ( dt_dots /= 9999999.9 ) THEN
	1135	WRITE ( io, 340 )
	1136
	1137	output_format = ''
	1138	IF ( netcdf_output ) THEN
[493]	1139	IF ( netcdf_data_format == 1 ) THEN
	1140	output_format = 'NetCDF classic'
[1]	1141	ELSE
[493]	1142	output_format = 'NetCDF 64bit offset'
[1]	1143	ENDIF
	1144	ENDIF
	1145	IF ( profil_output ) THEN
	1146	IF ( netcdf_output ) THEN
	1147	output_format = TRIM( output_format ) // ' and profil'
	1148	ELSE
	1149	output_format = 'profil'
	1150	ENDIF
	1151	ENDIF
[292]	1152	WRITE ( io, 344 ) output_format
[1]	1153	WRITE ( io, 341 ) dt_dots
	1154	ENDIF
	1155
	1156	#if defined( __dvrp_graphics )
	1157	!
	1158	!-- Dvrp-output
	1159	IF ( dt_dvrp /= 9999999.9 ) THEN
	1160	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1161	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1162	i = 1
	1163	l = 0
[336]	1164	m = 0
[1]	1165	DO WHILE ( mode_dvrp(i) /= ' ' )
	1166	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1167	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1168	l = l + 1
	1169	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1170	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1171	isosurface_color(:,l)
[1]	1172	ENDIF
	1173	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1174	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1175	m = m + 1
	1176	IF ( do2d(0,j) /= ' ' ) THEN
	1177	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1178	slicer_range_limits_dvrp(:,m)
	1179	ENDIF
[1]	1180	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1181	WRITE ( io, 363 ) dvrp_psize
	1182	IF ( particle_dvrpsize /= 'none' ) THEN
	1183	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1184	dvrpsize_interval
	1185	ENDIF
	1186	IF ( particle_color /= 'none' ) THEN
	1187	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1188	color_interval
	1189	ENDIF
[1]	1190	ENDIF
	1191	i = i + 1
	1192	ENDDO
[237]	1193
[336]	1194	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1195	superelevation_y, superelevation, clip_dvrp_l, &
	1196	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1197
	1198	IF ( TRIM( topography ) /= 'flat' ) THEN
	1199	WRITE ( io, 366 ) topography_color
	1200	IF ( cluster_size > 1 ) THEN
	1201	WRITE ( io, 367 ) cluster_size
	1202	ENDIF
[237]	1203	ENDIF
	1204
[1]	1205	ENDIF
	1206	#endif
	1207
	1208	#if defined( __spectra )
	1209	!
	1210	!-- Spectra output
	1211	IF ( dt_dosp /= 9999999.9 ) THEN
	1212	WRITE ( io, 370 )
	1213
	1214	output_format = ''
	1215	IF ( netcdf_output ) THEN
[493]	1216	IF ( netcdf_data_format == 1 ) THEN
	1217	output_format = 'NetCDF classic'
[1]	1218	ELSE
[493]	1219	output_format = 'NetCDF 64bit offset'
[1]	1220	ENDIF
	1221	ENDIF
	1222	IF ( profil_output ) THEN
	1223	IF ( netcdf_output ) THEN
	1224	output_format = TRIM( output_format ) // ' and profil'
	1225	ELSE
	1226	output_format = 'profil'
	1227	ENDIF
	1228	ENDIF
[292]	1229	WRITE ( io, 344 ) output_format
[1]	1230	WRITE ( io, 371 ) dt_dosp
	1231	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1232	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1233	( spectra_direction(i), i = 1,10 ), &
[189]	1234	( comp_spectra_level(i), i = 1,100 ), &
	1235	( plot_spectra_level(i), i = 1,100 ), &
[1]	1236	averaging_interval_sp, dt_averaging_input_pr
	1237	ENDIF
	1238	#endif
	1239
	1240	WRITE ( io, 99 )
	1241
	1242	!
	1243	!-- Physical quantities
	1244	WRITE ( io, 400 )
	1245
	1246	!
	1247	!-- Geostrophic parameters
	1248	WRITE ( io, 410 ) omega, phi, f, fs
	1249
	1250	!
	1251	!-- Other quantities
	1252	WRITE ( io, 411 ) g
[97]	1253	IF ( use_reference ) THEN
	1254	IF ( ocean ) THEN
	1255	WRITE ( io, 412 ) prho_reference
	1256	ELSE
	1257	WRITE ( io, 413 ) pt_reference
	1258	ENDIF
	1259	ENDIF
[1]	1260
	1261	!
	1262	!-- Cloud physics parameters
	1263	IF ( cloud_physics ) THEN
[57]	1264	WRITE ( io, 415 )
	1265	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1266	ENDIF
	1267
	1268	!-- Profile of the geostrophic wind (component ug)
	1269	!-- Building output strings
	1270	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1271	gradients = '------'
	1272	slices = ' 0'
	1273	coordinates = ' 0.0'
	1274	i = 1
	1275	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1276
[167]	1277	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1278	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1279
[167]	1280	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1281	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1282
[167]	1283	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1284	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1285
[167]	1286	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1287	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1288
[430]	1289	IF ( i == 10 ) THEN
	1290	EXIT
	1291	ELSE
	1292	i = i + 1
	1293	ENDIF
	1294
[1]	1295	ENDDO
	1296
	1297	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1298	TRIM( gradients ), TRIM( slices )
	1299
	1300	!-- Profile of the geostrophic wind (component vg)
	1301	!-- Building output strings
	1302	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1303	gradients = '------'
	1304	slices = ' 0'
	1305	coordinates = ' 0.0'
	1306	i = 1
	1307	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1308
[167]	1309	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1310	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1311
[167]	1312	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1313	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1314
[167]	1315	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1316	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1317
[167]	1318	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1319	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1320
[430]	1321	IF ( i == 10 ) THEN
	1322	EXIT
	1323	ELSE
	1324	i = i + 1
	1325	ENDIF
	1326
[1]	1327	ENDDO
	1328
	1329	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1330	TRIM( gradients ), TRIM( slices )
	1331
	1332	!
[767]	1333	!-- Initial wind profiles
	1334	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1335
	1336	!
[1]	1337	!-- Initial temperature profile
	1338	!-- Building output strings, starting with surface temperature
	1339	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1340	gradients = '------'
	1341	slices = ' 0'
	1342	coordinates = ' 0.0'
	1343	i = 1
	1344	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1345
[94]	1346	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1347	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1348
[94]	1349	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1350	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1351
[94]	1352	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1353	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1354
[94]	1355	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1356	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1357
[430]	1358	IF ( i == 10 ) THEN
	1359	EXIT
	1360	ELSE
	1361	i = i + 1
	1362	ENDIF
	1363
[1]	1364	ENDDO
	1365
	1366	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1367	TRIM( gradients ), TRIM( slices )
	1368
	1369	!
	1370	!-- Initial humidity profile
	1371	!-- Building output strings, starting with surface humidity
[75]	1372	IF ( humidity .OR. passive_scalar ) THEN
[1]	1373	WRITE ( temperatures, '(E8.1)' ) q_surface
	1374	gradients = '--------'
	1375	slices = ' 0'
	1376	coordinates = ' 0.0'
	1377	i = 1
	1378	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1379
	1380	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1381	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1382
	1383	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1384	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1385
	1386	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1387	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1388
	1389	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1390	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1391
[430]	1392	IF ( i == 10 ) THEN
	1393	EXIT
	1394	ELSE
	1395	i = i + 1
	1396	ENDIF
	1397
[1]	1398	ENDDO
	1399
[75]	1400	IF ( humidity ) THEN
[1]	1401	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1402	TRIM( gradients ), TRIM( slices )
	1403	ELSE
	1404	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1405	TRIM( gradients ), TRIM( slices )
	1406	ENDIF
	1407	ENDIF
	1408
	1409	!
[97]	1410	!-- Initial salinity profile
	1411	!-- Building output strings, starting with surface salinity
	1412	IF ( ocean ) THEN
	1413	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1414	gradients = '------'
	1415	slices = ' 0'
	1416	coordinates = ' 0.0'
	1417	i = 1
	1418	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1419
	1420	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1421	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1422
	1423	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1424	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1425
	1426	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1427	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1428
	1429	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1430	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1431
[430]	1432	IF ( i == 10 ) THEN
	1433	EXIT
	1434	ELSE
	1435	i = i + 1
	1436	ENDIF
	1437
[97]	1438	ENDDO
	1439
	1440	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1441	TRIM( gradients ), TRIM( slices )
	1442	ENDIF
	1443
	1444	!
[411]	1445	!-- Profile for the large scale vertial velocity
	1446	!-- Building output strings, starting with surface value
	1447	IF ( large_scale_subsidence ) THEN
	1448	temperatures = ' 0.0'
	1449	gradients = '------'
	1450	slices = ' 0'
	1451	coordinates = ' 0.0'
	1452	i = 1
[580]	1453	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1454
	1455	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1456	w_subs(subs_vertical_gradient_level_i(i))
[411]	1457	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1458
[580]	1459	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1460	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1461
[580]	1462	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1463	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1464
[580]	1465	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1466	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1467
[430]	1468	IF ( i == 10 ) THEN
	1469	EXIT
	1470	ELSE
	1471	i = i + 1
	1472	ENDIF
	1473
[411]	1474	ENDDO
	1475
	1476	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1477	TRIM( gradients ), TRIM( slices )
	1478	ENDIF
	1479
	1480	!
[824]	1481	!-- Cloud physcis parameters / quantities / numerical methods
	1482	WRITE ( io, 430 )
	1483	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1484	WRITE ( io, 431 )
	1485	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1486	WRITE ( io, 432 )
	1487	IF ( radiation ) WRITE ( io, 132 )
	1488	IF ( precipitation ) WRITE ( io, 133 )
	1489	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1490	WRITE ( io, 433 )
	1491	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1492	IF ( collision_kernel /= 'none' ) THEN
	1493	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1494	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1495	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1496	ENDIF
[825]	1497	ELSE
[828]	1498	WRITE ( io, 437 )
[825]	1499	ENDIF
[824]	1500	ENDIF
	1501
	1502	!
[1]	1503	!-- LES / turbulence parameters
	1504	WRITE ( io, 450 )
	1505
	1506	!--
	1507	! ... LES-constants used must still be added here
	1508	!--
	1509	IF ( constant_diffusion ) THEN
	1510	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1511	prandtl_number
	1512	ENDIF
	1513	IF ( .NOT. constant_diffusion) THEN
[108]	1514	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1515	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1516	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1517	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1518	ENDIF
	1519
	1520	!
	1521	!-- Special actions during the run
	1522	WRITE ( io, 470 )
	1523	IF ( create_disturbances ) THEN
	1524	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1525	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1526	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1527	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1528	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1529	ELSE
	1530	WRITE ( io, 473 ) disturbance_energy_limit
	1531	ENDIF
	1532	WRITE ( io, 474 ) TRIM( random_generator )
	1533	ENDIF
	1534	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1535	WRITE ( io, 475 ) pt_surface_initial_change
	1536	ENDIF
[75]	1537	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1538	WRITE ( io, 476 ) q_surface_initial_change
	1539	ENDIF
	1540	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1541	WRITE ( io, 477 ) q_surface_initial_change
	1542	ENDIF
	1543
[60]	1544	IF ( particle_advection ) THEN
[1]	1545	!
[60]	1546	!-- Particle attributes
	1547	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1548	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1549	end_time_prel, dt_sort_particles
[60]	1550	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1551	IF ( random_start_position ) WRITE ( io, 481 )
	1552	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1553	WRITE ( io, 495 ) total_number_of_particles
[824]	1554	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1555	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1556	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1557	WRITE ( io, 484 ) total_number_of_tails, &
	1558	minimum_tailpoint_distance, &
	1559	maximum_tailpoint_age
	1560	ENDIF
[1]	1561	ENDIF
[60]	1562	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1563	WRITE ( io, 485 ) dt_write_particle_data
	1564	output_format = ''
	1565	IF ( netcdf_output ) THEN
[493]	1566	IF ( netcdf_data_format > 1 ) THEN
[60]	1567	output_format = 'netcdf (64 bit offset) and binary'
	1568	ELSE
	1569	output_format = 'netcdf and binary'
	1570	ENDIF
[1]	1571	ELSE
[60]	1572	output_format = 'binary'
[1]	1573	ENDIF
[292]	1574	WRITE ( io, 344 ) output_format
[1]	1575	ENDIF
[60]	1576	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1577	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1578
[60]	1579	WRITE ( io, 487 ) number_of_particle_groups
[1]	1580
[60]	1581	DO i = 1, number_of_particle_groups
	1582	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1583	WRITE ( io, 490 ) i, 0.0
	1584	WRITE ( io, 492 )
[1]	1585	ELSE
[60]	1586	WRITE ( io, 490 ) i, radius(i)
	1587	IF ( density_ratio(i) /= 0.0 ) THEN
	1588	WRITE ( io, 491 ) density_ratio(i)
	1589	ELSE
	1590	WRITE ( io, 492 )
	1591	ENDIF
[1]	1592	ENDIF
[60]	1593	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1594	pdx(i), pdy(i), pdz(i)
[336]	1595	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1596	ENDDO
[1]	1597
[60]	1598	ENDIF
[1]	1599
[60]	1600
[1]	1601	!
	1602	!-- Parameters of 1D-model
	1603	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1604	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1605	mixing_length_1d, dissipation_1d
	1606	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1607	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1608	ENDIF
	1609	ENDIF
	1610
	1611	!
	1612	!-- User-defined informations
	1613	CALL user_header( io )
	1614
	1615	WRITE ( io, 99 )
	1616
	1617	!
	1618	!-- Write buffer contents to disc immediately
[82]	1619	CALL local_flush( io )
[1]	1620
	1621	!
	1622	!-- Here the FORMATs start
	1623
	1624	99 FORMAT (1X,78('-'))
[200]	1625	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1626	1X,'* ',A,' *',9X,A/ &
	1627	1X,'***************************',9X,42('-'))
[291]	1628	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1629	37X,42('-'))
[200]	1630	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1631	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1632	' Run on host: ',A10)
[1]	1633	#if defined( __parallel )
[200]	1634	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1635	')',1X,A)
[200]	1636	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1637	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1638	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1639	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1640	37X,'because the job is running on an SMP-cluster')
[102]	1641	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1642	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1643	#endif
	1644	110 FORMAT (/' Numerical Schemes:'/ &
	1645	' -----------------'/)
	1646	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1647	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1648	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1649	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1650	' or Upstream')
	1651	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1652	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1653	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1654	' or Upstream')
	1655	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1656	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1657	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1658	' Translation velocity = ',A/ &
	1659	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1660	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1661	' of timestep changes)')
	1662	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1663	' timestep changes')
	1664	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1665	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1666	' maximum damping coefficient: ',F5.3, ' 1/s')
	1667	124 FORMAT (' Spline-overshoots are being suppressed')
	1668	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1669	' of'/ &
	1670	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1671	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1672	' of'/ &
	1673	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1674	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1675	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1676	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1677	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1678	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1679	130 FORMAT (' --> Additional prognostic equation for the total water content')
[824]	1680	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1681	' effective emissivity scheme')
[824]	1682	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1683	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1684	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1685	A,'-cycle)'/ &
	1686	' number of grid levels: ',I2/ &
	1687	' Gauss-Seidel red/black iterations: ',I2)
	1688	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1689	I3,')')
	1690	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1691	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1692	I3,')'/ &
	1693	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1694	I3,')')
	1695	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1696	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1697	140 FORMAT (' maximum residual allowed: ',E10.3)
	1698	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1699	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1700	'step')
[87]	1701	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1702	'kinetic energy')
[1]	1703	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1704	'conserved'/ &
	1705	' using the ',A,' mode')
	1706	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1707	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1708	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1709	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1710	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1711	'prognostic equation for')
	1712	154 FORMAT (' the potential temperature')
[1]	1713	200 FORMAT (//' Run time and time step information:'/ &
	1714	' ----------------------------------'/)
	1715	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1716	' CFL-factor: ',F4.2)
	1717	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1718	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1719	' End time: ',F9.3,' s')
	1720	204 FORMAT ( A,F9.3,' s')
	1721	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1722	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1723	' CPU-time used: ',F9.3,' s per timestep: ', &
	1724	' ',F9.3,' s'/ &
	1725	' per second of simulated tim', &
	1726	'e: ',F9.3,' s')
[291]	1727	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1728	250 FORMAT (//' Computational grid and domain size:'/ &
	1729	' ----------------------------------'// &
	1730	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1731	' m dz = ',F7.3,' m'/ &
	1732	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1733	' m z(u) = ',F10.3,' m'/)
	1734	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1735	' factor: ',F5.3/ &
	1736	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1737	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1738	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1739	255 FORMAT (' Subdomains have equal size')
	1740	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1741	'have smaller sizes'/ &
	1742	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1743	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1744	' degrees')
	1745	270 FORMAT (//' Topography informations:'/ &
	1746	' -----------------------'// &
	1747	1X,'Topography: ',A)
	1748	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1749	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1750	' / ',I4)
[240]	1751	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1752	' direction' / &
	1753	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1754	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1755	278 FORMAT (' Topography grid definition convention:'/ &
	1756	' cell edge (staggered grid points'/ &
	1757	' (u in x-direction, v in y-direction))' /)
	1758	279 FORMAT (' Topography grid definition convention:'/ &
	1759	' cell center (scalar grid points)' /)
[138]	1760	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1761	' ------------------------------'// &
	1762	' Canopy mode: ', A / &
	1763	' Canopy top: ',I4 / &
	1764	' Leaf drag coefficient: ',F6.2 /)
[153]	1765	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1766	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1767	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1768	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1769	' Height: ',A,' m'/ &
	1770	' Leaf area density: ',A,' m2/m3'/ &
	1771	' Gradient: ',A,' m2/m4'/ &
	1772	' Gridpoint: ',A)
	1773
[1]	1774	300 FORMAT (//' Boundary conditions:'/ &
	1775	' -------------------'// &
	1776	' p uv ', &
	1777	' pt'// &
	1778	' B. bound.: ',A/ &
	1779	' T. bound.: ',A)
[97]	1780	301 FORMAT (/' ',A// &
[1]	1781	' B. bound.: ',A/ &
	1782	' T. bound.: ',A)
[19]	1783	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1784	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1785	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1786	'computational u,v-level:'// &
[1]	1787	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1788	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1789	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1790	307 FORMAT (' Heatflux has a random normal distribution')
	1791	308 FORMAT (' Predefined surface temperature')
[97]	1792	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1793	310 FORMAT (//' 1D-Model:'// &
	1794	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1795	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1796	312 FORMAT (' Predefined surface humidity')
	1797	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1798	314 FORMAT (' Predefined scalar value at the surface')
[19]	1799	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1800	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1801	'atmosphere model')
[1]	1802	317 FORMAT (//' Lateral boundaries:'/ &
	1803	' left/right: ',A/ &
	1804	' north/south: ',A)
	1805	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1806	'max =',F5.1,' m**2/s')
[151]	1807	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1808	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1809	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1810	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1811	' v: ',F9.6,' m2/s2')
[151]	1812	325 FORMAT (//' List output:'/ &
[1]	1813	' -----------'// &
	1814	' 1D-Profiles:'/ &
	1815	' Output every ',F8.2,' s')
[151]	1816	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1817	' Averaging input every ',F8.2,' s')
	1818	330 FORMAT (//' Data output:'/ &
	1819	' -----------'/)
	1820	331 FORMAT (/' 1D-Profiles:')
	1821	332 FORMAT (/' ',A)
	1822	333 FORMAT (' Output every ',F8.2,' s',/ &
	1823	' Time averaged over ',F8.2,' s'/ &
	1824	' Averaging input every ',F8.2,' s')
	1825	334 FORMAT (/' 2D-Arrays',A,':')
	1826	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1827	' Output every ',F8.2,' s ',A/ &
	1828	' Cross sections at ',A1,' = ',A/ &
	1829	' scalar-coordinates: ',A,' m'/)
	1830	336 FORMAT (/' 3D-Arrays',A,':')
	1831	337 FORMAT (/' Arrays: ',A/ &
	1832	' Output every ',F8.2,' s ',A/ &
	1833	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1834	338 FORMAT (' Compressed data output'/ &
	1835	' Decimal precision: ',A/)
	1836	339 FORMAT (' No output during initial ',F8.2,' s')
	1837	340 FORMAT (/' Time series:')
	1838	341 FORMAT (' Output every ',F8.2,' s'/)
	1839	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1840	' Output every ',F8.2,' s ',A/ &
	1841	' Time averaged over ',F8.2,' s'/ &
	1842	' Averaging input every ',F8.2,' s'/ &
	1843	' Cross sections at ',A1,' = ',A/ &
	1844	' scalar-coordinates: ',A,' m'/)
	1845	343 FORMAT (/' Arrays: ',A/ &
	1846	' Output every ',F8.2,' s ',A/ &
	1847	' Time averaged over ',F8.2,' s'/ &
	1848	' Averaging input every ',F8.2,' s'/ &
	1849	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1850	344 FORMAT (' Output format: ',A/)
[410]	1851	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1852	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1853	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1854	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1855	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1856	347 FORMAT (' Variables: ',A/ &
	1857	' Output every ',F8.2,' s')
	1858	348 FORMAT (' Variables: ',A/ &
	1859	' Output every ',F8.2,' s'/ &
	1860	' Time averaged over ',F8.2,' s'/ &
	1861	' Averaging input every ',F8.2,' s')
	1862	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1863	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1864	13(' ',8(F8.2,',')/) )
	1865	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1866	'all gridpoints along ',A,'-direction (default).' )
	1867	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1868	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1869	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1870	#if defined( __dvrp_graphics )
	1871	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1872	' Output every ',F7.1,' s'/ &
	1873	' Output mode: ',A/ &
	1874	' Host / User: ',A,' / ',A/ &
	1875	' Directory: ',A// &
	1876	' The sequence contains:')
[337]	1877	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1878	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1879	362 FORMAT (/' Slicer plane ',A/ &
[336]	1880	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1881	363 FORMAT (/' Particles'/ &
[336]	1882	' particle size: ',F7.2,' m')
	1883	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1884	F6.2,',',F6.2,']')
[337]	1885	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1886	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1887	')'/ &
	1888	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1889	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1890	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1891	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1892	#endif
	1893	#if defined( __spectra )
	1894	370 FORMAT (' Spectra:')
	1895	371 FORMAT (' Output every ',F7.1,' s'/)
	1896	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1897	' Directions: ', 10(A5,',')/ &
[189]	1898	' height levels k = ', 20(I3,',')/ &
	1899	' ', 20(I3,',')/ &
	1900	' ', 20(I3,',')/ &
	1901	' ', 20(I3,',')/ &
	1902	' ', 19(I3,','),I3,'.'/ &
[1]	1903	' height levels selected for standard plot:'/ &
[189]	1904	' k = ', 20(I3,',')/ &
	1905	' ', 20(I3,',')/ &
	1906	' ', 20(I3,',')/ &
	1907	' ', 20(I3,',')/ &
	1908	' ', 19(I3,','),I3,'.'/ &
[1]	1909	' Time averaged over ', F7.1, ' s,' / &
	1910	' Profiles for the time averaging are taken every ', &
	1911	F6.1,' s')
	1912	#endif
	1913	400 FORMAT (//' Physical quantities:'/ &
	1914	' -------------------'/)
	1915	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1916	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1917	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1918	' f* = ',F9.6,' 1/s')
	1919	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1920	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1921	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1922	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1923	' ------------------------'/)
[57]	1924	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1925	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1926	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1927	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1928	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1929	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1930	' Height: ',A,' m'/ &
	1931	' Temperature: ',A,' K'/ &
	1932	' Gradient: ',A,' K/100m'/ &
	1933	' Gridpoint: ',A)
	1934	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1935	' Height: ',A,' m'/ &
	1936	' Humidity: ',A,' kg/kg'/ &
	1937	' Gradient: ',A,' (kg/kg)/100m'/ &
	1938	' Gridpoint: ',A)
	1939	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1940	' Height: ',A,' m'/ &
	1941	' Scalar concentration: ',A,' kg/m**3'/ &
	1942	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1943	' Gridpoint: ',A)
	1944	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1945	' Height: ',A,' m'/ &
	1946	' ug: ',A,' m/s'/ &
	1947	' Gradient: ',A,' 1/100s'/ &
	1948	' Gridpoint: ',A)
	1949	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1950	' Height: ',A,' m'/ &
[97]	1951	' vg: ',A,' m/s'/ &
[1]	1952	' Gradient: ',A,' 1/100s'/ &
	1953	' Gridpoint: ',A)
[97]	1954	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1955	' Height: ',A,' m'/ &
	1956	' Salinity: ',A,' psu'/ &
	1957	' Gradient: ',A,' psu/100m'/ &
	1958	' Gridpoint: ',A)
[411]	1959	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1960	' Height: ',A,' m'/ &
	1961	' w_subs: ',A,' m/s'/ &
	1962	' Gradient: ',A,' (m/s)/100m'/ &
	1963	' Gridpoint: ',A)
[767]	1964	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1965	' profiles')
[824]	1966	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1967	' ----------------------------------'/)
	1968	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1969	'on)')
	1970	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1971	' total water content is used.'/ &
	1972	' Condensation is parameterized via 0% - or 100% scheme.')
	1973	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1974	'icle model')
	1975	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1976	' droplets < 1.0E-6 m')
[825]	1977	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1978	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1979	'are used'/ &
	1980	' number of radius classes: ',I3,' interval ', &
	1981	'[1.0E-6,2.0E-4] m'/ &
	1982	' number of dissipation classes: ',I2,' interval ', &
	1983	'[0,1000] cm2/s3')
	1984	437 FORMAT (' Droplet collision is switched off')
[1]	1985	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1986	' ---------------------------'/)
[824]	1987	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1988	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1989	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1990	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1991	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1992	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1993	470 FORMAT (//' Actions during the simulation:'/ &
	1994	' -----------------------------'/)
[94]	1995	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1996	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1997	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1998	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1999	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	2000	' to i/j =',I4)
	2001	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	2002	1X,F5.3, ' m2/s2')
	2003	474 FORMAT (' Random number generator used : ',A/)
	2004	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	2005	'respectively, if'/ &
	2006	' the value is negative) by ',F5.2,' K at the beginning of the',&
	2007	' 3D-simulation'/)
	2008	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	2009	'respectively, if the'/ &
	2010	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	2011	' the 3D-simulation'/)
	2012	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	2013	'respectively, if the'/ &
	2014	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	2015	' the 3D-simulation'/)
	2016	480 FORMAT (' Particles:'/ &
	2017	' ---------'// &
	2018	' Particle advection is active (switched on at t = ', F7.1, &
	2019	' s)'/ &
	2020	' Start of new particle generations every ',F6.1,' s'/ &
	2021	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	2022	' bottom: ', A, ' top: ', A/&
	2023	' Maximum particle age: ',F9.1,' s'/ &
[117]	2024	' Advection stopped at t = ',F9.1,' s'/ &
	2025	' Particles are sorted every ',F9.1,' s'/)
[1]	2026	481 FORMAT (' Particles have random start positions'/)
[336]	2027	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2028	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2029	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2030	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2031	' Maximum age of the end of the tail: ',F8.2,' s')
	2032	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2033	486 FORMAT (' Particle statistics are written on file'/)
	2034	487 FORMAT (' Number of particle groups: ',I2/)
	2035	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2036	' minimum timestep for advection: ', F7.5/)
	2037	489 FORMAT (' Number of particles simultaneously released at each ', &
	2038	'point: ', I5/)
	2039	490 FORMAT (' Particle group ',I2,':'/ &
	2040	' Particle radius: ',E10.3, 'm')
	2041	491 FORMAT (' Particle inertia is activated'/ &
	2042	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2043	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2044	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2045	' y:',F8.1,' - ',F8.1,' m'/&
	2046	' z:',F8.1,' - ',F8.1,' m'/&
	2047	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2048	' m dz = ',F8.1,' m'/)
	2049	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2050	F8.2,' s'/)
	2051	495 FORMAT (' Number of particles in total domain: ',I10/)
	2052	500 FORMAT (//' 1D-Model parameters:'/ &
	2053	' -------------------'// &
	2054	' Simulation time: ',F8.1,' s'/ &
	2055	' Run-controll output every: ',F8.1,' s'/ &
	2056	' Vertical profile output every: ',F8.1,' s'/ &
	2057	' Mixing length calculation: ',A/ &
	2058	' Dissipation calculation: ',A/)
	2059	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2060	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2061	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2062
	2063
	2064	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |