Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 857

Last change on this file since 857 was 834, checked in by maronga, 13 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 79.6 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[834]	6	!
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 834 2012-02-22 08:57:06Z suehring $
	11	!
[834]	12	! 833 2012-02-22 08:55:55Z maronga
	13	! Adjusted format for leaf area density
	14	!
[829]	15	! 828 2012-02-21 12:00:36Z raasch
	16	! output of dissipation_classes + radius_classes
	17	!
[826]	18	! 825 2012-02-19 03:03:44Z raasch
	19	! Output of cloud physics parameters/quantities complemented and restructured
	20	!
[768]	21	! 767 2011-10-14 06:39:12Z raasch
	22	! Output of given initial u,v-profiles
	23	!
[760]	24	! 759 2011-09-15 13:58:31Z raasch
	25	! output of maximum number of parallel io streams
	26	!
[708]	27	! 707 2011-03-29 11:39:40Z raasch
	28	! bc_lr/ns replaced by bc_lr/ns_cyc
	29	!
[668]	30	! 667 2010-12-23 12:06:00Z suehring/gryschka
	31	! Output of advection scheme.
	32	! Modified output of Prandtl-layer height.
	33	!
[581]	34	! 580 2010-10-05 13:59:11Z heinze
	35	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	36	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	37	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	38	!
[494]	39	! 493 2010-03-01 08:30:24Z raasch
	40	! NetCDF data output format extendend for NetCDF4/HDF5
	41	!
[482]	42	! 449 2010-02-02 11:23:59Z raasch
	43	! +large scale vertical motion (subsidence/ascent)
	44	! Bugfix: index problem concerning gradient_level indices removed
	45	!
[449]	46	! 410 2009-12-04 17:05:40Z letzel
	47	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	48	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	49	!
[392]	50	! 346 2009-07-06 10:13:41Z raasch
[328]	51	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	52	! Coupling with independent precursor runs.
[254]	53	! Output of messages replaced by message handling routine.
[336]	54	! Output of several additional dvr parameters
[240]	55	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	56	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	57	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	58	! topography_grid_convention moved from user_header
[292]	59	! small bugfix concerning 3d 64bit netcdf output format
[1]	60	!
[226]	61	! 206 2008-10-13 14:59:11Z raasch
	62	! Bugfix: error in zu index in case of section_xy = -1
	63	!
[200]	64	! 198 2008-09-17 08:55:28Z raasch
	65	! Format adjustments allowing output of larger revision numbers
	66	!
[198]	67	! 197 2008-09-16 15:29:03Z raasch
	68	! allow 100 spectra levels instead of 10 for consistency with
	69	! define_netcdf_header,
	70	! bugfix in the output of the characteristic levels of potential temperature,
	71	! geostrophic wind, scalar concentration, humidity and leaf area density,
	72	! output of turbulence recycling informations
	73	!
[139]	74	! 138 2007-11-28 10:03:58Z letzel
	75	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	76	! Allow two instead of one digit to specify isosurface and slicer variables.
	77	! Output of sorting frequency of particles
	78	!
[110]	79	! 108 2007-08-24 15:10:38Z letzel
	80	! Output of informations for coupled model runs (boundary conditions etc.)
	81	! + output of momentumfluxes at the top boundary
	82	! Rayleigh damping for ocean, e_init
	83	!
[98]	84	! 97 2007-06-21 08:23:15Z raasch
	85	! Adjustments for the ocean version.
	86	! use_pt_reference renamed use_reference
	87	!
[90]	88	! 87 2007-05-22 15:46:47Z raasch
	89	! Bugfix: output of use_upstream_for_tke
	90	!
[83]	91	! 82 2007-04-16 15:40:52Z raasch
	92	! Preprocessor strings for different linux clusters changed to "lc",
	93	! routine local_flush is used for buffer flushing
	94	!
[77]	95	! 76 2007-03-29 00:58:32Z raasch
	96	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	97	! output of the loop optimization method, moisture renamed humidity,
	98	! output of subversion revision number
	99	!
[39]	100	! 19 2007-02-23 04:53:48Z raasch
	101	! Output of scalar flux applied at top boundary
	102	!
[3]	103	! RCS Log replace by Id keyword, revision history cleaned up
	104	!
[1]	105	! Revision 1.63 2006/08/22 13:53:13 raasch
	106	! Output of dz_max
	107	!
	108	! Revision 1.1 1997/08/11 06:17:20 raasch
	109	! Initial revision
	110	!
	111	!
	112	! Description:
	113	! ------------
	114	! Writing a header with all important informations about the actual run.
	115	! This subroutine is called three times, two times at the beginning
	116	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	117	! end of the run, then writing additional information about CPU-usage on file
	118	! header.
[411]	119	!-----------------------------------------------------------------------------!
[1]	120
	121	USE arrays_3d
	122	USE control_parameters
	123	USE cloud_parameters
	124	USE cpulog
	125	USE dvrp_variables
	126	USE grid_variables
	127	USE indices
	128	USE model_1d
	129	USE particle_attributes
	130	USE pegrid
[411]	131	USE subsidence_mod
[1]	132	USE spectrum
	133
	134	IMPLICIT NONE
	135
	136	CHARACTER (LEN=1) :: prec
	137	CHARACTER (LEN=2) :: do2d_mode
	138	CHARACTER (LEN=5) :: section_chr
	139	CHARACTER (LEN=9) :: time_to_string
	140	CHARACTER (LEN=10) :: coor_chr, host_chr
	141	CHARACTER (LEN=16) :: begin_chr
[200]	142	CHARACTER (LEN=23) :: ver_rev
[1]	143	CHARACTER (LEN=40) :: output_format
[167]	144	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	145	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	146	domask_chr, run_classification
[167]	147	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	148	temperatures, ugcomponent, vgcomponent
[1]	149	CHARACTER (LEN=85) :: roben, runten
	150
[410]	151	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	152
	153	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	154	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	155	REAL :: cpuseconds_per_simulated_second
	156
	157	!
	158	!-- Open the output file. At the end of the simulation, output is directed
	159	!-- to unit 19.
	160	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	161	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	162	io = 15 ! header output on file RUN_CONTROL
	163	ELSE
	164	io = 19 ! header output on file HEADER
	165	ENDIF
	166	CALL check_open( io )
	167
	168	!
	169	!-- At the end of the run, output file (HEADER) will be rewritten with
	170	!-- new informations
	171	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	172
	173	!
	174	!-- Determine kind of model run
	175	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	176	run_classification = '3D - restart run'
[328]	177	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	178	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	179	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	180	run_classification = '3D - run without 1D - prerun'
[197]	181	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	182	run_classification = '3D - run with 1D - prerun'
[197]	183	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	184	run_classification = '3D - run initialized by user'
[1]	185	ELSE
[254]	186	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	187	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	188	ENDIF
[97]	189	IF ( ocean ) THEN
	190	run_classification = 'ocean - ' // run_classification
	191	ELSE
	192	run_classification = 'atmosphere - ' // run_classification
	193	ENDIF
[1]	194
	195	!
	196	!-- Run-identification, date, time, host
	197	host_chr = host(1:10)
[75]	198	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	199	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	200	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	201	#if defined( __mpi2 )
	202	mpi_type = 2
	203	#else
	204	mpi_type = 1
	205	#endif
	206	WRITE ( io, 101 ) mpi_type, coupling_mode
	207	ENDIF
[102]	208	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	209	ADJUSTR( host_chr )
[1]	210	#if defined( __parallel )
	211	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	212	char1 = 'calculated'
	213	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	214	host(1:2) == 'lc' ) .AND. &
	215	npex == -1 .AND. pdims(2) == 1 ) THEN
	216	char1 = 'forced'
	217	ELSE
	218	char1 = 'predefined'
	219	ENDIF
	220	IF ( threads_per_task == 1 ) THEN
[102]	221	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	222	ELSE
[102]	223	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	224	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	225	ENDIF
	226	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	227	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	228	npex == -1 .AND. pdims(2) == 1 ) &
	229	THEN
[102]	230	WRITE ( io, 106 )
[1]	231	ELSEIF ( pdims(2) == 1 ) THEN
[102]	232	WRITE ( io, 107 ) 'x'
[1]	233	ELSEIF ( pdims(1) == 1 ) THEN
[102]	234	WRITE ( io, 107 ) 'y'
[1]	235	ENDIF
[102]	236	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	237	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	238	WRITE ( io, 108 ) maximum_parallel_io_streams
	239	ENDIF
[1]	240	#endif
	241	WRITE ( io, 99 )
	242
	243	!
	244	!-- Numerical schemes
	245	WRITE ( io, 110 )
	246	IF ( psolver(1:7) == 'poisfft' ) THEN
	247	WRITE ( io, 111 ) TRIM( fft_method )
	248	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	249	ELSEIF ( psolver == 'sor' ) THEN
	250	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	251	ELSEIF ( psolver == 'multigrid' ) THEN
	252	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	253	IF ( mg_cycles == -1 ) THEN
	254	WRITE ( io, 140 ) residual_limit
	255	ELSE
	256	WRITE ( io, 141 ) mg_cycles
	257	ENDIF
	258	IF ( mg_switch_to_pe0_level == 0 ) THEN
	259	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	260	nzt_mg(1)
[197]	261	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	262	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	263	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	264	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	265	nzt_mg(mg_switch_to_pe0_level), &
	266	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	267	nzt_mg(1)
	268	ENDIF
	269	ENDIF
	270	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	271	THEN
	272	WRITE ( io, 142 )
	273	ENDIF
	274
	275	IF ( momentum_advec == 'pw-scheme' ) THEN
	276	WRITE ( io, 113 )
[667]	277	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	278	WRITE ( io, 503 )
	279	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	280	WRITE ( io, 114 )
	281	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	282	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	283	overshoot_limit_w /= 0.0 ) THEN
	284	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	285	overshoot_limit_w
	286	ENDIF
	287	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	288	ups_limit_w /= 0.0 ) &
	289	THEN
	290	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	291	ENDIF
	292	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	293	ENDIF
	294	IF ( scalar_advec == 'pw-scheme' ) THEN
	295	WRITE ( io, 116 )
[667]	296	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	297	WRITE ( io, 504 )
[1]	298	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	299	WRITE ( io, 117 )
	300	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	301	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	302	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	303	ENDIF
	304	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	305	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	306	ENDIF
	307	ELSE
	308	WRITE ( io, 118 )
	309	ENDIF
[63]	310
	311	WRITE ( io, 139 ) TRIM( loop_optimization )
	312
[1]	313	IF ( galilei_transformation ) THEN
	314	IF ( use_ug_for_galilei_tr ) THEN
	315	char1 = 'geostrophic wind'
	316	ELSE
	317	char1 = 'mean wind in model domain'
	318	ENDIF
	319	IF ( simulated_time_at_begin == simulated_time ) THEN
	320	char2 = 'at the start of the run'
	321	ELSE
	322	char2 = 'at the end of the run'
	323	ENDIF
	324	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	325	advected_distance_x/1000.0, advected_distance_y/1000.0
	326	ENDIF
	327	IF ( timestep_scheme == 'leapfrog' ) THEN
	328	WRITE ( io, 120 )
	329	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	330	WRITE ( io, 121 )
	331	ELSE
	332	WRITE ( io, 122 ) timestep_scheme
	333	ENDIF
[87]	334	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	335	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	336	IF ( .NOT. ocean ) THEN
	337	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	338	rayleigh_damping_factor
	339	ELSE
	340	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	341	rayleigh_damping_factor
	342	ENDIF
[1]	343	ENDIF
[75]	344	IF ( humidity ) THEN
[1]	345	IF ( .NOT. cloud_physics ) THEN
	346	WRITE ( io, 129 )
	347	ELSE
	348	WRITE ( io, 130 )
	349	ENDIF
	350	ENDIF
	351	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	352	IF ( conserve_volume_flow ) THEN
[241]	353	WRITE ( io, 150 ) conserve_volume_flow_mode
	354	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	355	WRITE ( io, 151 ) u_bulk, v_bulk
	356	ENDIF
[240]	357	ELSEIF ( dp_external ) THEN
	358	IF ( dp_smooth ) THEN
[241]	359	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	360	ELSE
[241]	361	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	362	ENDIF
	363	ENDIF
[411]	364	IF ( large_scale_subsidence ) THEN
	365	WRITE ( io, 153 )
	366	WRITE ( io, 154 )
	367	ENDIF
[1]	368	WRITE ( io, 99 )
	369
	370	!
	371	!-- Runtime and timestep informations
	372	WRITE ( io, 200 )
	373	IF ( .NOT. dt_fixed ) THEN
	374	WRITE ( io, 201 ) dt_max, cfl_factor
	375	ELSE
	376	WRITE ( io, 202 ) dt
	377	ENDIF
	378	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	379
	380	IF ( time_restart /= 9999999.9 .AND. &
	381	simulated_time_at_begin == simulated_time ) THEN
	382	IF ( dt_restart == 9999999.9 ) THEN
	383	WRITE ( io, 204 ) ' Restart at: ',time_restart
	384	ELSE
	385	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	386	ENDIF
	387	ENDIF
	388
	389	IF ( simulated_time_at_begin /= simulated_time ) THEN
	390	i = MAX ( log_point_s(10)%counts, 1 )
	391	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	392	cpuseconds_per_simulated_second = 0.0
	393	ELSE
	394	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	395	( simulated_time - &
	396	simulated_time_at_begin )
	397	ENDIF
	398	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	399	log_point_s(10)%sum / REAL( i ), &
	400	cpuseconds_per_simulated_second
	401	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	402	IF ( dt_restart == 9999999.9 ) THEN
	403	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	404	ELSE
	405	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	406	ENDIF
	407	ENDIF
	408	ENDIF
	409
	410	!
[291]	411	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	412	!-- and ocean are used. In this case, coupling_start_time defines the time
	413	!-- when the coupling is switched on.
	414	IF ( coupling_start_time /= 0.0 ) THEN
	415	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	416	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	417	ELSE
	418	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	419	'precursor runs'
	420	ENDIF
	421	WRITE ( io, 207 ) char1, coupling_start_time
	422	ENDIF
	423
	424	!
[1]	425	!-- Computational grid
[94]	426	IF ( .NOT. ocean ) THEN
	427	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	428	IF ( dz_stretch_level_index < nzt+1 ) THEN
	429	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	430	dz_stretch_factor, dz_max
	431	ENDIF
	432	ELSE
	433	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	434	IF ( dz_stretch_level_index > 0 ) THEN
	435	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	436	dz_stretch_factor, dz_max
	437	ENDIF
[1]	438	ENDIF
	439	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	440	MIN( nnz+2, nzt+2 )
[76]	441	IF ( numprocs > 1 ) THEN
	442	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	443	WRITE ( io, 255 )
	444	ELSE
	445	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	446	ENDIF
[1]	447	ENDIF
	448	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	449
	450	!
	451	!-- Topography
	452	WRITE ( io, 270 ) topography
	453	SELECT CASE ( TRIM( topography ) )
	454
	455	CASE ( 'flat' )
	456	! no actions necessary
	457
	458	CASE ( 'single_building' )
	459	blx = INT( building_length_x / dx )
	460	bly = INT( building_length_y / dy )
	461	bh = INT( building_height / dz )
	462
	463	IF ( building_wall_left == 9999999.9 ) THEN
	464	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	465	ENDIF
	466	bxl = INT ( building_wall_left / dx + 0.5 )
	467	bxr = bxl + blx
	468
	469	IF ( building_wall_south == 9999999.9 ) THEN
	470	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	471	ENDIF
	472	bys = INT ( building_wall_south / dy + 0.5 )
	473	byn = bys + bly
	474
	475	WRITE ( io, 271 ) building_length_x, building_length_y, &
	476	building_height, bxl, bxr, bys, byn
	477
[240]	478	CASE ( 'single_street_canyon' )
	479	ch = NINT( canyon_height / dz )
	480	IF ( canyon_width_x /= 9999999.9 ) THEN
	481	!
	482	!-- Street canyon in y direction
	483	cwx = NINT( canyon_width_x / dx )
	484	IF ( canyon_wall_left == 9999999.9 ) THEN
	485	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	486	ENDIF
	487	cxl = NINT( canyon_wall_left / dx )
	488	cxr = cxl + cwx
	489	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	490
	491	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	492	!
	493	!-- Street canyon in x direction
	494	cwy = NINT( canyon_width_y / dy )
	495	IF ( canyon_wall_south == 9999999.9 ) THEN
	496	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	497	ENDIF
	498	cys = NINT( canyon_wall_south / dy )
	499	cyn = cys + cwy
	500	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	501	ENDIF
	502
[1]	503	END SELECT
	504
[256]	505	IF ( TRIM( topography ) /= 'flat' ) THEN
	506	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	507	IF ( TRIM( topography ) == 'single_building' .OR. &
	508	TRIM( topography ) == 'single_street_canyon' ) THEN
	509	WRITE ( io, 278 )
	510	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	511	WRITE ( io, 279 )
	512	ENDIF
	513	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	514	WRITE ( io, 278 )
	515	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	516	WRITE ( io, 279 )
	517	ENDIF
	518	ENDIF
	519
[138]	520	IF ( plant_canopy ) THEN
	521
	522	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	523	IF ( passive_scalar ) THEN
	524	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	525	leaf_surface_concentration
	526	ENDIF
[138]	527
[1]	528	!
[153]	529	!-- Heat flux at the top of vegetation
	530	WRITE ( io, 282 ) cthf
	531
	532	!
[138]	533	!-- Leaf area density profile
	534	!-- Building output strings, starting with surface value
[833]	535	WRITE ( learde, '(F6.4)' ) lad_surface
[138]	536	gradients = '------'
	537	slices = ' 0'
	538	coordinates = ' 0.0'
	539	i = 1
	540	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	541
	542	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	543	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	544
	545	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	546	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	547
	548	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	549	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	550
	551	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	552	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	553
	554	i = i + 1
	555	ENDDO
	556
[153]	557	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	558	TRIM( gradients ), TRIM( slices )
	559
	560	ENDIF
	561
	562	!
[1]	563	!-- Boundary conditions
	564	IF ( ibc_p_b == 0 ) THEN
	565	runten = 'p(0) = 0 \|'
	566	ELSEIF ( ibc_p_b == 1 ) THEN
	567	runten = 'p(0) = p(1) \|'
	568	ELSE
	569	runten = 'p(0) = p(1) +R\|'
	570	ENDIF
	571	IF ( ibc_p_t == 0 ) THEN
	572	roben = 'p(nzt+1) = 0 \|'
	573	ELSE
	574	roben = 'p(nzt+1) = p(nzt) \|'
	575	ENDIF
	576
	577	IF ( ibc_uv_b == 0 ) THEN
	578	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	579	ELSE
	580	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	581	ENDIF
[132]	582	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	583	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	584	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	585	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	586	ELSE
	587	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	588	ENDIF
	589
	590	IF ( ibc_pt_b == 0 ) THEN
	591	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	592	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	593	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	594	ELSEIF ( ibc_pt_b == 2 ) THEN
	595	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	596	ENDIF
	597	IF ( ibc_pt_t == 0 ) THEN
[19]	598	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	599	ELSEIF( ibc_pt_t == 1 ) THEN
	600	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	601	ELSEIF( ibc_pt_t == 2 ) THEN
	602	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	603
[1]	604	ENDIF
	605
	606	WRITE ( io, 300 ) runten, roben
	607
	608	IF ( .NOT. constant_diffusion ) THEN
	609	IF ( ibc_e_b == 1 ) THEN
	610	runten = 'e(0) = e(1)'
	611	ELSE
	612	runten = 'e(0) = e(1) = (u/0.1)*2'
	613	ENDIF
	614	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	615
[97]	616	WRITE ( io, 301 ) 'e', runten, roben
[1]	617
	618	ENDIF
	619
[97]	620	IF ( ocean ) THEN
	621	runten = 'sa(0) = sa(1)'
	622	IF ( ibc_sa_t == 0 ) THEN
	623	roben = 'sa(nzt+1) = sa_surface'
[1]	624	ELSE
[97]	625	roben = 'sa(nzt+1) = sa(nzt)'
[1]	626	ENDIF
[97]	627	WRITE ( io, 301 ) 'sa', runten, roben
	628	ENDIF
[1]	629
[97]	630	IF ( humidity ) THEN
	631	IF ( ibc_q_b == 0 ) THEN
	632	runten = 'q(0) = q_surface'
	633	ELSE
	634	runten = 'q(0) = q(1)'
	635	ENDIF
	636	IF ( ibc_q_t == 0 ) THEN
	637	roben = 'q(nzt) = q_top'
	638	ELSE
	639	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	640	ENDIF
	641	WRITE ( io, 301 ) 'q', runten, roben
	642	ENDIF
[1]	643
[97]	644	IF ( passive_scalar ) THEN
	645	IF ( ibc_q_b == 0 ) THEN
	646	runten = 's(0) = s_surface'
	647	ELSE
	648	runten = 's(0) = s(1)'
	649	ENDIF
	650	IF ( ibc_q_t == 0 ) THEN
	651	roben = 's(nzt) = s_top'
	652	ELSE
	653	roben = 's(nzt) = s(nzt-1) + ds/dz'
	654	ENDIF
	655	WRITE ( io, 301 ) 's', runten, roben
[1]	656	ENDIF
	657
	658	IF ( use_surface_fluxes ) THEN
	659	WRITE ( io, 303 )
	660	IF ( constant_heatflux ) THEN
	661	WRITE ( io, 306 ) surface_heatflux
	662	IF ( random_heatflux ) WRITE ( io, 307 )
	663	ENDIF
[75]	664	IF ( humidity .AND. constant_waterflux ) THEN
[1]	665	WRITE ( io, 311 ) surface_waterflux
	666	ENDIF
	667	IF ( passive_scalar .AND. constant_waterflux ) THEN
	668	WRITE ( io, 313 ) surface_waterflux
	669	ENDIF
	670	ENDIF
	671
[19]	672	IF ( use_top_fluxes ) THEN
	673	WRITE ( io, 304 )
[102]	674	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	675	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	676	IF ( constant_top_heatflux ) THEN
	677	WRITE ( io, 306 ) top_heatflux
	678	ENDIF
	679	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	680	WRITE ( io, 316 )
[19]	681	ENDIF
[97]	682	IF ( ocean .AND. constant_top_salinityflux ) THEN
	683	WRITE ( io, 309 ) top_salinityflux
	684	ENDIF
[75]	685	IF ( humidity .OR. passive_scalar ) THEN
[19]	686	WRITE ( io, 315 )
	687	ENDIF
	688	ENDIF
	689
[1]	690	IF ( prandtl_layer ) THEN
[667]	691	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	692	rif_min, rif_max
[1]	693	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	694	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	695	WRITE ( io, 312 )
	696	ENDIF
	697	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	698	WRITE ( io, 314 )
	699	ENDIF
	700	ELSE
	701	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	702	WRITE ( io, 310 ) rif_min, rif_max
	703	ENDIF
	704	ENDIF
	705
	706	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	707	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	708	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	709	IF ( turbulent_inflow ) THEN
	710	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	711	inflow_damping_height, inflow_damping_width
	712	ENDIF
[1]	713	ENDIF
	714
	715	!
	716	!-- Listing of 1D-profiles
[151]	717	WRITE ( io, 325 ) dt_dopr_listing
[1]	718	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	719	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	720	ENDIF
	721
	722	!
	723	!-- DATA output
	724	WRITE ( io, 330 )
	725	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	726	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	727	ENDIF
	728
	729	!
	730	!-- 1D-profiles
[346]	731	dopr_chr = 'Profile:'
[1]	732	IF ( dopr_n /= 0 ) THEN
	733	WRITE ( io, 331 )
	734
	735	output_format = ''
	736	IF ( netcdf_output ) THEN
[493]	737	IF ( netcdf_data_format == 1 ) THEN
	738	output_format = 'NetCDF classic'
[1]	739	ELSE
[493]	740	output_format = 'NetCDF 64bit offset'
[1]	741	ENDIF
	742	ENDIF
	743	IF ( profil_output ) THEN
	744	IF ( netcdf_output ) THEN
	745	output_format = TRIM( output_format ) // ' and profil'
	746	ELSE
	747	output_format = 'profil'
	748	ENDIF
	749	ENDIF
[292]	750	WRITE ( io, 344 ) output_format
[1]	751
	752	DO i = 1, dopr_n
	753	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	754	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	755	WRITE ( io, 332 ) dopr_chr
	756	dopr_chr = ' :'
	757	ENDIF
	758	ENDDO
	759
	760	IF ( dopr_chr /= '' ) THEN
	761	WRITE ( io, 332 ) dopr_chr
	762	ENDIF
	763	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	764	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	765	ENDIF
	766
	767	!
	768	!-- 2D-arrays
	769	DO av = 0, 1
	770
	771	i = 1
	772	do2d_xy = ''
	773	do2d_xz = ''
	774	do2d_yz = ''
	775	DO WHILE ( do2d(av,i) /= ' ' )
	776
	777	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	778	do2d_mode = do2d(av,i)(l-1:l)
	779
	780	SELECT CASE ( do2d_mode )
	781	CASE ( 'xy' )
	782	ll = LEN_TRIM( do2d_xy )
	783	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	784	CASE ( 'xz' )
	785	ll = LEN_TRIM( do2d_xz )
	786	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	787	CASE ( 'yz' )
	788	ll = LEN_TRIM( do2d_yz )
	789	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	790	END SELECT
	791
	792	i = i + 1
	793
	794	ENDDO
	795
	796	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	797	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	798	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	799	( netcdf_output .OR. iso2d_output ) ) THEN
	800
	801	IF ( av == 0 ) THEN
	802	WRITE ( io, 334 ) ''
	803	ELSE
	804	WRITE ( io, 334 ) '(time-averaged)'
	805	ENDIF
	806
	807	IF ( do2d_at_begin ) THEN
	808	begin_chr = 'and at the start'
	809	ELSE
	810	begin_chr = ''
	811	ENDIF
	812
	813	output_format = ''
	814	IF ( netcdf_output ) THEN
[493]	815	IF ( netcdf_data_format == 1 ) THEN
	816	output_format = 'NetCDF classic'
	817	ELSEIF ( netcdf_data_format == 2 ) THEN
	818	output_format = 'NetCDF 64bit offset'
	819	ELSEIF ( netcdf_data_format == 3 ) THEN
	820	output_format = 'NetCDF4/HDF5'
	821	ELSEIF ( netcdf_data_format == 4 ) THEN
	822	output_format = 'NetCDF4/HDF5 clasic'
[1]	823	ENDIF
	824	ENDIF
	825	IF ( iso2d_output ) THEN
	826	IF ( netcdf_output ) THEN
	827	output_format = TRIM( output_format ) // ' and iso2d'
	828	ELSE
	829	output_format = 'iso2d'
	830	ENDIF
	831	ENDIF
[292]	832	WRITE ( io, 344 ) output_format
[1]	833
	834	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	835	i = 1
	836	slices = '/'
	837	coordinates = '/'
	838	!
	839	!-- Building strings with index and coordinate informations of the
	840	!-- slices
	841	DO WHILE ( section(i,1) /= -9999 )
	842
	843	WRITE (section_chr,'(I5)') section(i,1)
	844	section_chr = ADJUSTL( section_chr )
	845	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	846
[206]	847	IF ( section(i,1) == -1 ) THEN
	848	WRITE (coor_chr,'(F10.1)') -1.0
	849	ELSE
	850	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	851	ENDIF
[1]	852	coor_chr = ADJUSTL( coor_chr )
	853	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	854
	855	i = i + 1
	856	ENDDO
	857	IF ( av == 0 ) THEN
	858	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	859	TRIM( begin_chr ), 'k', TRIM( slices ), &
	860	TRIM( coordinates )
	861	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	862	WRITE ( io, 339 ) skip_time_do2d_xy
	863	ENDIF
	864	ELSE
	865	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	866	TRIM( begin_chr ), averaging_interval, &
	867	dt_averaging_input, 'k', TRIM( slices ), &
	868	TRIM( coordinates )
	869	IF ( skip_time_data_output_av /= 0.0 ) THEN
	870	WRITE ( io, 339 ) skip_time_data_output_av
	871	ENDIF
	872	ENDIF
	873
	874	ENDIF
	875
	876	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	877	i = 1
	878	slices = '/'
	879	coordinates = '/'
	880	!
	881	!-- Building strings with index and coordinate informations of the
	882	!-- slices
	883	DO WHILE ( section(i,2) /= -9999 )
	884
	885	WRITE (section_chr,'(I5)') section(i,2)
	886	section_chr = ADJUSTL( section_chr )
	887	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	888
	889	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	890	coor_chr = ADJUSTL( coor_chr )
	891	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	892
	893	i = i + 1
	894	ENDDO
	895	IF ( av == 0 ) THEN
	896	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	897	TRIM( begin_chr ), 'j', TRIM( slices ), &
	898	TRIM( coordinates )
	899	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	900	WRITE ( io, 339 ) skip_time_do2d_xz
	901	ENDIF
	902	ELSE
	903	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	904	TRIM( begin_chr ), averaging_interval, &
	905	dt_averaging_input, 'j', TRIM( slices ), &
	906	TRIM( coordinates )
	907	IF ( skip_time_data_output_av /= 0.0 ) THEN
	908	WRITE ( io, 339 ) skip_time_data_output_av
	909	ENDIF
	910	ENDIF
	911	ENDIF
	912
	913	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	914	i = 1
	915	slices = '/'
	916	coordinates = '/'
	917	!
	918	!-- Building strings with index and coordinate informations of the
	919	!-- slices
	920	DO WHILE ( section(i,3) /= -9999 )
	921
	922	WRITE (section_chr,'(I5)') section(i,3)
	923	section_chr = ADJUSTL( section_chr )
	924	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	925
	926	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	927	coor_chr = ADJUSTL( coor_chr )
	928	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	929
	930	i = i + 1
	931	ENDDO
	932	IF ( av == 0 ) THEN
	933	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	934	TRIM( begin_chr ), 'i', TRIM( slices ), &
	935	TRIM( coordinates )
	936	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	937	WRITE ( io, 339 ) skip_time_do2d_yz
	938	ENDIF
	939	ELSE
	940	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	941	TRIM( begin_chr ), averaging_interval, &
	942	dt_averaging_input, 'i', TRIM( slices ), &
	943	TRIM( coordinates )
	944	IF ( skip_time_data_output_av /= 0.0 ) THEN
	945	WRITE ( io, 339 ) skip_time_data_output_av
	946	ENDIF
	947	ENDIF
	948	ENDIF
	949
	950	ENDIF
	951
	952	ENDDO
	953
	954	!
	955	!-- 3d-arrays
	956	DO av = 0, 1
	957
	958	i = 1
	959	do3d_chr = ''
	960	DO WHILE ( do3d(av,i) /= ' ' )
	961
	962	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	963	i = i + 1
	964
	965	ENDDO
	966
	967	IF ( do3d_chr /= '' ) THEN
	968	IF ( av == 0 ) THEN
	969	WRITE ( io, 336 ) ''
	970	ELSE
	971	WRITE ( io, 336 ) '(time-averaged)'
	972	ENDIF
	973
	974	output_format = ''
	975	IF ( netcdf_output ) THEN
[493]	976	IF ( netcdf_data_format == 1 ) THEN
	977	output_format = 'NetCDF classic'
	978	ELSEIF ( netcdf_data_format == 2 ) THEN
	979	output_format = 'NetCDF 64bit offset'
	980	ELSEIF ( netcdf_data_format == 3 ) THEN
	981	output_format = 'NetCDF4/HDF5'
	982	ELSEIF ( netcdf_data_format == 4 ) THEN
	983	output_format = 'NetCDF4/HDF5 clasic'
[1]	984	ENDIF
	985	ENDIF
	986	IF ( avs_output ) THEN
	987	IF ( netcdf_output ) THEN
	988	output_format = TRIM( output_format ) // ' and avs'
	989	ELSE
	990	output_format = 'avs'
	991	ENDIF
	992	ENDIF
[292]	993	WRITE ( io, 344 ) output_format
[1]	994
	995	IF ( do3d_at_begin ) THEN
	996	begin_chr = 'and at the start'
	997	ELSE
	998	begin_chr = ''
	999	ENDIF
	1000	IF ( av == 0 ) THEN
	1001	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1002	zu(nz_do3d), nz_do3d
	1003	ELSE
	1004	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1005	TRIM( begin_chr ), averaging_interval, &
	1006	dt_averaging_input, zu(nz_do3d), nz_do3d
	1007	ENDIF
	1008
	1009	IF ( do3d_compress ) THEN
	1010	do3d_chr = ''
	1011	i = 1
	1012	DO WHILE ( do3d(av,i) /= ' ' )
	1013
	1014	SELECT CASE ( do3d(av,i) )
	1015	CASE ( 'u' )
	1016	j = 1
	1017	CASE ( 'v' )
	1018	j = 2
	1019	CASE ( 'w' )
	1020	j = 3
	1021	CASE ( 'p' )
	1022	j = 4
	1023	CASE ( 'pt' )
	1024	j = 5
	1025	END SELECT
	1026	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1027	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1028	':' // prec // ','
	1029	i = i + 1
	1030
	1031	ENDDO
	1032	WRITE ( io, 338 ) do3d_chr
	1033
	1034	ENDIF
	1035
	1036	IF ( av == 0 ) THEN
	1037	IF ( skip_time_do3d /= 0.0 ) THEN
	1038	WRITE ( io, 339 ) skip_time_do3d
	1039	ENDIF
	1040	ELSE
	1041	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1042	WRITE ( io, 339 ) skip_time_data_output_av
	1043	ENDIF
	1044	ENDIF
	1045
	1046	ENDIF
	1047
	1048	ENDDO
	1049
	1050	!
[410]	1051	!-- masked arrays
	1052	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1053	mask_scale_x, mask_scale_y, mask_scale_z
	1054	DO mid = 1, masks
	1055	DO av = 0, 1
	1056
	1057	i = 1
	1058	domask_chr = ''
	1059	DO WHILE ( domask(mid,av,i) /= ' ' )
	1060	domask_chr = TRIM( domask_chr ) // ' ' // &
	1061	TRIM( domask(mid,av,i) ) // ','
	1062	i = i + 1
	1063	ENDDO
	1064
	1065	IF ( domask_chr /= '' ) THEN
	1066	IF ( av == 0 ) THEN
	1067	WRITE ( io, 346 ) '', mid
	1068	ELSE
	1069	WRITE ( io, 346 ) ' (time-averaged)', mid
	1070	ENDIF
	1071
	1072	output_format = ''
	1073	IF ( netcdf_output ) THEN
[493]	1074	IF ( netcdf_data_format == 1 ) THEN
	1075	output_format = 'NetCDF classic'
	1076	ELSEIF ( netcdf_data_format == 2 ) THEN
	1077	output_format = 'NetCDF 64bit offset'
	1078	ELSEIF ( netcdf_data_format == 3 ) THEN
	1079	output_format = 'NetCDF4/HDF5'
	1080	ELSEIF ( netcdf_data_format == 4 ) THEN
	1081	output_format = 'NetCDF4/HDF5 clasic'
	1082	ENDIF
[410]	1083	ENDIF
	1084	WRITE ( io, 344 ) output_format
	1085
	1086	IF ( av == 0 ) THEN
	1087	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1088	ELSE
	1089	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1090	averaging_interval, dt_averaging_input
	1091	ENDIF
	1092
	1093	IF ( av == 0 ) THEN
	1094	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1095	WRITE ( io, 339 ) skip_time_domask(mid)
	1096	ENDIF
	1097	ELSE
	1098	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1099	WRITE ( io, 339 ) skip_time_data_output_av
	1100	ENDIF
	1101	ENDIF
	1102	!
	1103	!-- output locations
	1104	DO dim = 1, 3
	1105	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1106	count = 0
	1107	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1108	count = count + 1
	1109	ENDDO
	1110	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1111	mask(mid,dim,:count)
	1112	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1113	mask_loop(mid,dim,2) < 0.0 .AND. &
	1114	mask_loop(mid,dim,3) == 0.0 ) THEN
	1115	WRITE ( io, 350 ) dir(dim), dir(dim)
	1116	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1117	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1118	mask_loop(mid,dim,1:2)
	1119	ELSE
	1120	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1121	mask_loop(mid,dim,1:3)
	1122	ENDIF
	1123	ENDDO
	1124	ENDIF
	1125
	1126	ENDDO
	1127	ENDDO
	1128
	1129	!
[1]	1130	!-- Timeseries
	1131	IF ( dt_dots /= 9999999.9 ) THEN
	1132	WRITE ( io, 340 )
	1133
	1134	output_format = ''
	1135	IF ( netcdf_output ) THEN
[493]	1136	IF ( netcdf_data_format == 1 ) THEN
	1137	output_format = 'NetCDF classic'
[1]	1138	ELSE
[493]	1139	output_format = 'NetCDF 64bit offset'
[1]	1140	ENDIF
	1141	ENDIF
	1142	IF ( profil_output ) THEN
	1143	IF ( netcdf_output ) THEN
	1144	output_format = TRIM( output_format ) // ' and profil'
	1145	ELSE
	1146	output_format = 'profil'
	1147	ENDIF
	1148	ENDIF
[292]	1149	WRITE ( io, 344 ) output_format
[1]	1150	WRITE ( io, 341 ) dt_dots
	1151	ENDIF
	1152
	1153	#if defined( __dvrp_graphics )
	1154	!
	1155	!-- Dvrp-output
	1156	IF ( dt_dvrp /= 9999999.9 ) THEN
	1157	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1158	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1159	i = 1
	1160	l = 0
[336]	1161	m = 0
[1]	1162	DO WHILE ( mode_dvrp(i) /= ' ' )
	1163	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1164	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1165	l = l + 1
	1166	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1167	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1168	isosurface_color(:,l)
[1]	1169	ENDIF
	1170	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1171	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1172	m = m + 1
	1173	IF ( do2d(0,j) /= ' ' ) THEN
	1174	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1175	slicer_range_limits_dvrp(:,m)
	1176	ENDIF
[1]	1177	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1178	WRITE ( io, 363 ) dvrp_psize
	1179	IF ( particle_dvrpsize /= 'none' ) THEN
	1180	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1181	dvrpsize_interval
	1182	ENDIF
	1183	IF ( particle_color /= 'none' ) THEN
	1184	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1185	color_interval
	1186	ENDIF
[1]	1187	ENDIF
	1188	i = i + 1
	1189	ENDDO
[237]	1190
[336]	1191	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1192	superelevation_y, superelevation, clip_dvrp_l, &
	1193	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1194
	1195	IF ( TRIM( topography ) /= 'flat' ) THEN
	1196	WRITE ( io, 366 ) topography_color
	1197	IF ( cluster_size > 1 ) THEN
	1198	WRITE ( io, 367 ) cluster_size
	1199	ENDIF
[237]	1200	ENDIF
	1201
[1]	1202	ENDIF
	1203	#endif
	1204
	1205	#if defined( __spectra )
	1206	!
	1207	!-- Spectra output
	1208	IF ( dt_dosp /= 9999999.9 ) THEN
	1209	WRITE ( io, 370 )
	1210
	1211	output_format = ''
	1212	IF ( netcdf_output ) THEN
[493]	1213	IF ( netcdf_data_format == 1 ) THEN
	1214	output_format = 'NetCDF classic'
[1]	1215	ELSE
[493]	1216	output_format = 'NetCDF 64bit offset'
[1]	1217	ENDIF
	1218	ENDIF
	1219	IF ( profil_output ) THEN
	1220	IF ( netcdf_output ) THEN
	1221	output_format = TRIM( output_format ) // ' and profil'
	1222	ELSE
	1223	output_format = 'profil'
	1224	ENDIF
	1225	ENDIF
[292]	1226	WRITE ( io, 344 ) output_format
[1]	1227	WRITE ( io, 371 ) dt_dosp
	1228	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1229	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1230	( spectra_direction(i), i = 1,10 ), &
[189]	1231	( comp_spectra_level(i), i = 1,100 ), &
	1232	( plot_spectra_level(i), i = 1,100 ), &
[1]	1233	averaging_interval_sp, dt_averaging_input_pr
	1234	ENDIF
	1235	#endif
	1236
	1237	WRITE ( io, 99 )
	1238
	1239	!
	1240	!-- Physical quantities
	1241	WRITE ( io, 400 )
	1242
	1243	!
	1244	!-- Geostrophic parameters
	1245	WRITE ( io, 410 ) omega, phi, f, fs
	1246
	1247	!
	1248	!-- Other quantities
	1249	WRITE ( io, 411 ) g
[97]	1250	IF ( use_reference ) THEN
	1251	IF ( ocean ) THEN
	1252	WRITE ( io, 412 ) prho_reference
	1253	ELSE
	1254	WRITE ( io, 413 ) pt_reference
	1255	ENDIF
	1256	ENDIF
[1]	1257
	1258	!
	1259	!-- Cloud physics parameters
	1260	IF ( cloud_physics ) THEN
[57]	1261	WRITE ( io, 415 )
	1262	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1263	ENDIF
	1264
	1265	!-- Profile of the geostrophic wind (component ug)
	1266	!-- Building output strings
	1267	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1268	gradients = '------'
	1269	slices = ' 0'
	1270	coordinates = ' 0.0'
	1271	i = 1
	1272	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1273
[167]	1274	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1275	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1276
[167]	1277	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1279
[167]	1280	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1282
[167]	1283	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1285
[430]	1286	IF ( i == 10 ) THEN
	1287	EXIT
	1288	ELSE
	1289	i = i + 1
	1290	ENDIF
	1291
[1]	1292	ENDDO
	1293
	1294	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1295	TRIM( gradients ), TRIM( slices )
	1296
	1297	!-- Profile of the geostrophic wind (component vg)
	1298	!-- Building output strings
	1299	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1300	gradients = '------'
	1301	slices = ' 0'
	1302	coordinates = ' 0.0'
	1303	i = 1
	1304	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1305
[167]	1306	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1307	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1308
[167]	1309	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1310	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1311
[167]	1312	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1313	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1314
[167]	1315	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1316	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1317
[430]	1318	IF ( i == 10 ) THEN
	1319	EXIT
	1320	ELSE
	1321	i = i + 1
	1322	ENDIF
	1323
[1]	1324	ENDDO
	1325
	1326	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1327	TRIM( gradients ), TRIM( slices )
	1328
	1329	!
[767]	1330	!-- Initial wind profiles
	1331	IF ( u_profile(1) /= 9999999.9 ) WRITE ( io, 427 )
	1332
	1333	!
[1]	1334	!-- Initial temperature profile
	1335	!-- Building output strings, starting with surface temperature
	1336	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1337	gradients = '------'
	1338	slices = ' 0'
	1339	coordinates = ' 0.0'
	1340	i = 1
	1341	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1342
[94]	1343	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1344	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1345
[94]	1346	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1347	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1348
[94]	1349	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1350	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1351
[94]	1352	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1353	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1354
[430]	1355	IF ( i == 10 ) THEN
	1356	EXIT
	1357	ELSE
	1358	i = i + 1
	1359	ENDIF
	1360
[1]	1361	ENDDO
	1362
	1363	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1364	TRIM( gradients ), TRIM( slices )
	1365
	1366	!
	1367	!-- Initial humidity profile
	1368	!-- Building output strings, starting with surface humidity
[75]	1369	IF ( humidity .OR. passive_scalar ) THEN
[1]	1370	WRITE ( temperatures, '(E8.1)' ) q_surface
	1371	gradients = '--------'
	1372	slices = ' 0'
	1373	coordinates = ' 0.0'
	1374	i = 1
	1375	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1376
	1377	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1378	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1379
	1380	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1381	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1382
	1383	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1384	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1385
	1386	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1387	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1388
[430]	1389	IF ( i == 10 ) THEN
	1390	EXIT
	1391	ELSE
	1392	i = i + 1
	1393	ENDIF
	1394
[1]	1395	ENDDO
	1396
[75]	1397	IF ( humidity ) THEN
[1]	1398	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1399	TRIM( gradients ), TRIM( slices )
	1400	ELSE
	1401	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1402	TRIM( gradients ), TRIM( slices )
	1403	ENDIF
	1404	ENDIF
	1405
	1406	!
[97]	1407	!-- Initial salinity profile
	1408	!-- Building output strings, starting with surface salinity
	1409	IF ( ocean ) THEN
	1410	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1411	gradients = '------'
	1412	slices = ' 0'
	1413	coordinates = ' 0.0'
	1414	i = 1
	1415	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1416
	1417	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1418	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1419
	1420	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1421	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1422
	1423	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1424	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1425
	1426	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1427	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1428
[430]	1429	IF ( i == 10 ) THEN
	1430	EXIT
	1431	ELSE
	1432	i = i + 1
	1433	ENDIF
	1434
[97]	1435	ENDDO
	1436
	1437	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1438	TRIM( gradients ), TRIM( slices )
	1439	ENDIF
	1440
	1441	!
[411]	1442	!-- Profile for the large scale vertial velocity
	1443	!-- Building output strings, starting with surface value
	1444	IF ( large_scale_subsidence ) THEN
	1445	temperatures = ' 0.0'
	1446	gradients = '------'
	1447	slices = ' 0'
	1448	coordinates = ' 0.0'
	1449	i = 1
[580]	1450	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1451
	1452	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1453	w_subs(subs_vertical_gradient_level_i(i))
[411]	1454	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1455
[580]	1456	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1457	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1458
[580]	1459	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1460	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1461
[580]	1462	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1463	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1464
[430]	1465	IF ( i == 10 ) THEN
	1466	EXIT
	1467	ELSE
	1468	i = i + 1
	1469	ENDIF
	1470
[411]	1471	ENDDO
	1472
	1473	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1474	TRIM( gradients ), TRIM( slices )
	1475	ENDIF
	1476
	1477	!
[824]	1478	!-- Cloud physcis parameters / quantities / numerical methods
	1479	WRITE ( io, 430 )
	1480	IF ( humidity .AND. .NOT. cloud_physics .AND. .NOT. cloud_droplets) THEN
	1481	WRITE ( io, 431 )
	1482	ELSEIF ( humidity .AND. cloud_physics ) THEN
	1483	WRITE ( io, 432 )
	1484	IF ( radiation ) WRITE ( io, 132 )
	1485	IF ( precipitation ) WRITE ( io, 133 )
	1486	ELSEIF ( humidity .AND. cloud_droplets ) THEN
	1487	WRITE ( io, 433 )
	1488	IF ( curvature_solution_effects ) WRITE ( io, 434 )
[825]	1489	IF ( collision_kernel /= 'none' ) THEN
	1490	WRITE ( io, 435 ) TRIM( collision_kernel )
[828]	1491	IF ( collision_kernel(6:9) == 'fast' ) THEN
	1492	WRITE ( io, 436 ) radius_classes, dissipation_classes
	1493	ENDIF
[825]	1494	ELSE
[828]	1495	WRITE ( io, 437 )
[825]	1496	ENDIF
[824]	1497	ENDIF
	1498
	1499	!
[1]	1500	!-- LES / turbulence parameters
	1501	WRITE ( io, 450 )
	1502
	1503	!--
	1504	! ... LES-constants used must still be added here
	1505	!--
	1506	IF ( constant_diffusion ) THEN
	1507	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1508	prandtl_number
	1509	ENDIF
	1510	IF ( .NOT. constant_diffusion) THEN
[108]	1511	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1512	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1513	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1514	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1515	ENDIF
	1516
	1517	!
	1518	!-- Special actions during the run
	1519	WRITE ( io, 470 )
	1520	IF ( create_disturbances ) THEN
	1521	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1522	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1523	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1524	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1525	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1526	ELSE
	1527	WRITE ( io, 473 ) disturbance_energy_limit
	1528	ENDIF
	1529	WRITE ( io, 474 ) TRIM( random_generator )
	1530	ENDIF
	1531	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1532	WRITE ( io, 475 ) pt_surface_initial_change
	1533	ENDIF
[75]	1534	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1535	WRITE ( io, 476 ) q_surface_initial_change
	1536	ENDIF
	1537	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1538	WRITE ( io, 477 ) q_surface_initial_change
	1539	ENDIF
	1540
[60]	1541	IF ( particle_advection ) THEN
[1]	1542	!
[60]	1543	!-- Particle attributes
	1544	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1545	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1546	end_time_prel, dt_sort_particles
[60]	1547	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1548	IF ( random_start_position ) WRITE ( io, 481 )
	1549	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1550	WRITE ( io, 495 ) total_number_of_particles
[824]	1551	IF ( use_particle_tails .AND. maximum_number_of_tailpoints /= 0 ) THEN
[60]	1552	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1553	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1554	WRITE ( io, 484 ) total_number_of_tails, &
	1555	minimum_tailpoint_distance, &
	1556	maximum_tailpoint_age
	1557	ENDIF
[1]	1558	ENDIF
[60]	1559	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1560	WRITE ( io, 485 ) dt_write_particle_data
	1561	output_format = ''
	1562	IF ( netcdf_output ) THEN
[493]	1563	IF ( netcdf_data_format > 1 ) THEN
[60]	1564	output_format = 'netcdf (64 bit offset) and binary'
	1565	ELSE
	1566	output_format = 'netcdf and binary'
	1567	ENDIF
[1]	1568	ELSE
[60]	1569	output_format = 'binary'
[1]	1570	ENDIF
[292]	1571	WRITE ( io, 344 ) output_format
[1]	1572	ENDIF
[60]	1573	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1574	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1575
[60]	1576	WRITE ( io, 487 ) number_of_particle_groups
[1]	1577
[60]	1578	DO i = 1, number_of_particle_groups
	1579	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1580	WRITE ( io, 490 ) i, 0.0
	1581	WRITE ( io, 492 )
[1]	1582	ELSE
[60]	1583	WRITE ( io, 490 ) i, radius(i)
	1584	IF ( density_ratio(i) /= 0.0 ) THEN
	1585	WRITE ( io, 491 ) density_ratio(i)
	1586	ELSE
	1587	WRITE ( io, 492 )
	1588	ENDIF
[1]	1589	ENDIF
[60]	1590	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1591	pdx(i), pdy(i), pdz(i)
[336]	1592	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1593	ENDDO
[1]	1594
[60]	1595	ENDIF
[1]	1596
[60]	1597
[1]	1598	!
	1599	!-- Parameters of 1D-model
	1600	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1601	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1602	mixing_length_1d, dissipation_1d
	1603	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1604	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1605	ENDIF
	1606	ENDIF
	1607
	1608	!
	1609	!-- User-defined informations
	1610	CALL user_header( io )
	1611
	1612	WRITE ( io, 99 )
	1613
	1614	!
	1615	!-- Write buffer contents to disc immediately
[82]	1616	CALL local_flush( io )
[1]	1617
	1618	!
	1619	!-- Here the FORMATs start
	1620
	1621	99 FORMAT (1X,78('-'))
[200]	1622	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1623	1X,'* ',A,' *',9X,A/ &
	1624	1X,'***************************',9X,42('-'))
[291]	1625	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1626	37X,42('-'))
[200]	1627	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1628	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1629	' Run on host: ',A10)
[1]	1630	#if defined( __parallel )
[200]	1631	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1632	')',1X,A)
[200]	1633	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1634	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1635	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1636	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1637	37X,'because the job is running on an SMP-cluster')
[102]	1638	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1639	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1640	#endif
	1641	110 FORMAT (/' Numerical Schemes:'/ &
	1642	' -----------------'/)
	1643	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1644	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1645	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1646	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1647	' or Upstream')
	1648	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1649	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1650	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1651	' or Upstream')
	1652	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1653	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1654	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1655	' Translation velocity = ',A/ &
	1656	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1657	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1658	' of timestep changes)')
	1659	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1660	' timestep changes')
	1661	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1662	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1663	' maximum damping coefficient: ',F5.3, ' 1/s')
	1664	124 FORMAT (' Spline-overshoots are being suppressed')
	1665	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1666	' of'/ &
	1667	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1668	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1669	' of'/ &
	1670	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1671	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1672	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1673	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1674	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1675	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1676	130 FORMAT (' --> Additional prognostic equation for the total water content')
[824]	1677	132 FORMAT (' Parameterization of long-wave radiation processes via'/ &
[1]	1678	' effective emissivity scheme')
[824]	1679	133 FORMAT (' Precipitation parameterization via Kessler-Scheme')
[1]	1680	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1681	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1682	A,'-cycle)'/ &
	1683	' number of grid levels: ',I2/ &
	1684	' Gauss-Seidel red/black iterations: ',I2)
	1685	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1686	I3,')')
	1687	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1688	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1689	I3,')'/ &
	1690	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1691	I3,')')
	1692	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1693	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1694	140 FORMAT (' maximum residual allowed: ',E10.3)
	1695	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1696	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1697	'step')
[87]	1698	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1699	'kinetic energy')
[1]	1700	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1701	'conserved'/ &
	1702	' using the ',A,' mode')
	1703	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1704	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1705	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1706	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1707	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1708	'prognostic equation for')
	1709	154 FORMAT (' the potential temperature')
[1]	1710	200 FORMAT (//' Run time and time step information:'/ &
	1711	' ----------------------------------'/)
	1712	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1713	' CFL-factor: ',F4.2)
	1714	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1715	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1716	' End time: ',F9.3,' s')
	1717	204 FORMAT ( A,F9.3,' s')
	1718	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1719	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1720	' CPU-time used: ',F9.3,' s per timestep: ', &
	1721	' ',F9.3,' s'/ &
	1722	' per second of simulated tim', &
	1723	'e: ',F9.3,' s')
[291]	1724	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1725	250 FORMAT (//' Computational grid and domain size:'/ &
	1726	' ----------------------------------'// &
	1727	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1728	' m dz = ',F7.3,' m'/ &
	1729	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1730	' m z(u) = ',F10.3,' m'/)
	1731	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1732	' factor: ',F5.3/ &
	1733	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1734	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1735	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1736	255 FORMAT (' Subdomains have equal size')
	1737	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1738	'have smaller sizes'/ &
	1739	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1740	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1741	' degrees')
	1742	270 FORMAT (//' Topography informations:'/ &
	1743	' -----------------------'// &
	1744	1X,'Topography: ',A)
	1745	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1746	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1747	' / ',I4)
[240]	1748	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1749	' direction' / &
	1750	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1751	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1752	278 FORMAT (' Topography grid definition convention:'/ &
	1753	' cell edge (staggered grid points'/ &
	1754	' (u in x-direction, v in y-direction))' /)
	1755	279 FORMAT (' Topography grid definition convention:'/ &
	1756	' cell center (scalar grid points)' /)
[138]	1757	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1758	' ------------------------------'// &
	1759	' Canopy mode: ', A / &
	1760	' Canopy top: ',I4 / &
	1761	' Leaf drag coefficient: ',F6.2 /)
[153]	1762	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1763	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1764	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1765	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1766	' Height: ',A,' m'/ &
	1767	' Leaf area density: ',A,' m2/m3'/ &
	1768	' Gradient: ',A,' m2/m4'/ &
	1769	' Gridpoint: ',A)
	1770
[1]	1771	300 FORMAT (//' Boundary conditions:'/ &
	1772	' -------------------'// &
	1773	' p uv ', &
	1774	' pt'// &
	1775	' B. bound.: ',A/ &
	1776	' T. bound.: ',A)
[97]	1777	301 FORMAT (/' ',A// &
[1]	1778	' B. bound.: ',A/ &
	1779	' T. bound.: ',A)
[19]	1780	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1781	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1782	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1783	'computational u,v-level:'// &
[1]	1784	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1785	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1786	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1787	307 FORMAT (' Heatflux has a random normal distribution')
	1788	308 FORMAT (' Predefined surface temperature')
[97]	1789	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1790	310 FORMAT (//' 1D-Model:'// &
	1791	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1792	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1793	312 FORMAT (' Predefined surface humidity')
	1794	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1795	314 FORMAT (' Predefined scalar value at the surface')
[19]	1796	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1797	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1798	'atmosphere model')
[1]	1799	317 FORMAT (//' Lateral boundaries:'/ &
	1800	' left/right: ',A/ &
	1801	' north/south: ',A)
	1802	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1803	'max =',F5.1,' m**2/s')
[151]	1804	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1805	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1806	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1807	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1808	' v: ',F9.6,' m2/s2')
[151]	1809	325 FORMAT (//' List output:'/ &
[1]	1810	' -----------'// &
	1811	' 1D-Profiles:'/ &
	1812	' Output every ',F8.2,' s')
[151]	1813	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1814	' Averaging input every ',F8.2,' s')
	1815	330 FORMAT (//' Data output:'/ &
	1816	' -----------'/)
	1817	331 FORMAT (/' 1D-Profiles:')
	1818	332 FORMAT (/' ',A)
	1819	333 FORMAT (' Output every ',F8.2,' s',/ &
	1820	' Time averaged over ',F8.2,' s'/ &
	1821	' Averaging input every ',F8.2,' s')
	1822	334 FORMAT (/' 2D-Arrays',A,':')
	1823	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1824	' Output every ',F8.2,' s ',A/ &
	1825	' Cross sections at ',A1,' = ',A/ &
	1826	' scalar-coordinates: ',A,' m'/)
	1827	336 FORMAT (/' 3D-Arrays',A,':')
	1828	337 FORMAT (/' Arrays: ',A/ &
	1829	' Output every ',F8.2,' s ',A/ &
	1830	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1831	338 FORMAT (' Compressed data output'/ &
	1832	' Decimal precision: ',A/)
	1833	339 FORMAT (' No output during initial ',F8.2,' s')
	1834	340 FORMAT (/' Time series:')
	1835	341 FORMAT (' Output every ',F8.2,' s'/)
	1836	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1837	' Output every ',F8.2,' s ',A/ &
	1838	' Time averaged over ',F8.2,' s'/ &
	1839	' Averaging input every ',F8.2,' s'/ &
	1840	' Cross sections at ',A1,' = ',A/ &
	1841	' scalar-coordinates: ',A,' m'/)
	1842	343 FORMAT (/' Arrays: ',A/ &
	1843	' Output every ',F8.2,' s ',A/ &
	1844	' Time averaged over ',F8.2,' s'/ &
	1845	' Averaging input every ',F8.2,' s'/ &
	1846	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1847	344 FORMAT (' Output format: ',A/)
[410]	1848	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1849	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1850	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1851	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1852	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1853	347 FORMAT (' Variables: ',A/ &
	1854	' Output every ',F8.2,' s')
	1855	348 FORMAT (' Variables: ',A/ &
	1856	' Output every ',F8.2,' s'/ &
	1857	' Time averaged over ',F8.2,' s'/ &
	1858	' Averaging input every ',F8.2,' s')
	1859	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1860	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1861	13(' ',8(F8.2,',')/) )
	1862	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1863	'all gridpoints along ',A,'-direction (default).' )
	1864	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1865	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1866	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1867	#if defined( __dvrp_graphics )
	1868	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1869	' Output every ',F7.1,' s'/ &
	1870	' Output mode: ',A/ &
	1871	' Host / User: ',A,' / ',A/ &
	1872	' Directory: ',A// &
	1873	' The sequence contains:')
[337]	1874	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1875	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1876	362 FORMAT (/' Slicer plane ',A/ &
[336]	1877	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1878	363 FORMAT (/' Particles'/ &
[336]	1879	' particle size: ',F7.2,' m')
	1880	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1881	F6.2,',',F6.2,']')
[337]	1882	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1883	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1884	')'/ &
	1885	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1886	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1887	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1888	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1889	#endif
	1890	#if defined( __spectra )
	1891	370 FORMAT (' Spectra:')
	1892	371 FORMAT (' Output every ',F7.1,' s'/)
	1893	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1894	' Directions: ', 10(A5,',')/ &
[189]	1895	' height levels k = ', 20(I3,',')/ &
	1896	' ', 20(I3,',')/ &
	1897	' ', 20(I3,',')/ &
	1898	' ', 20(I3,',')/ &
	1899	' ', 19(I3,','),I3,'.'/ &
[1]	1900	' height levels selected for standard plot:'/ &
[189]	1901	' k = ', 20(I3,',')/ &
	1902	' ', 20(I3,',')/ &
	1903	' ', 20(I3,',')/ &
	1904	' ', 20(I3,',')/ &
	1905	' ', 19(I3,','),I3,'.'/ &
[1]	1906	' Time averaged over ', F7.1, ' s,' / &
	1907	' Profiles for the time averaging are taken every ', &
	1908	F6.1,' s')
	1909	#endif
	1910	400 FORMAT (//' Physical quantities:'/ &
	1911	' -------------------'/)
	1912	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1913	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1914	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1915	' f* = ',F9.6,' 1/s')
	1916	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1917	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1918	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1919	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1920	' ------------------------'/)
[57]	1921	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1922	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1923	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1924	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1925	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1926	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1927	' Height: ',A,' m'/ &
	1928	' Temperature: ',A,' K'/ &
	1929	' Gradient: ',A,' K/100m'/ &
	1930	' Gridpoint: ',A)
	1931	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1932	' Height: ',A,' m'/ &
	1933	' Humidity: ',A,' kg/kg'/ &
	1934	' Gradient: ',A,' (kg/kg)/100m'/ &
	1935	' Gridpoint: ',A)
	1936	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1937	' Height: ',A,' m'/ &
	1938	' Scalar concentration: ',A,' kg/m**3'/ &
	1939	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1940	' Gridpoint: ',A)
	1941	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1942	' Height: ',A,' m'/ &
	1943	' ug: ',A,' m/s'/ &
	1944	' Gradient: ',A,' 1/100s'/ &
	1945	' Gridpoint: ',A)
	1946	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1947	' Height: ',A,' m'/ &
[97]	1948	' vg: ',A,' m/s'/ &
[1]	1949	' Gradient: ',A,' 1/100s'/ &
	1950	' Gridpoint: ',A)
[97]	1951	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1952	' Height: ',A,' m'/ &
	1953	' Salinity: ',A,' psu'/ &
	1954	' Gradient: ',A,' psu/100m'/ &
	1955	' Gridpoint: ',A)
[411]	1956	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1957	' Height: ',A,' m'/ &
	1958	' w_subs: ',A,' m/s'/ &
	1959	' Gradient: ',A,' (m/s)/100m'/ &
	1960	' Gridpoint: ',A)
[767]	1961	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1962	' profiles')
[824]	1963	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1964	' ----------------------------------'/)
	1965	431 FORMAT (' Humidity is treated as purely passive scalar (no condensati', &
	1966	'on)')
	1967	432 FORMAT (' Bulk scheme with liquid water potential temperature and'/ &
	1968	' total water content is used.'/ &
	1969	' Condensation is parameterized via 0% - or 100% scheme.')
	1970	433 FORMAT (' Cloud droplets treated explicitly using the Lagrangian part', &
	1971	'icle model')
	1972	434 FORMAT (' Curvature and solution effecs are considered for growth of', &
	1973	' droplets < 1.0E-6 m')
[825]	1974	435 FORMAT (' Droplet collision is handled by ',A,'-kernel')
[828]	1975	436 FORMAT (' Fast kernel with fixed radius- and dissipation classes ', &
	1976	'are used'/ &
	1977	' number of radius classes: ',I3,' interval ', &
	1978	'[1.0E-6,2.0E-4] m'/ &
	1979	' number of dissipation classes: ',I2,' interval ', &
	1980	'[0,1000] cm2/s3')
	1981	437 FORMAT (' Droplet collision is switched off')
[1]	1982	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1983	' ---------------------------'/)
[824]	1984	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1985	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1986	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1987	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1988	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1989	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1990	470 FORMAT (//' Actions during the simulation:'/ &
	1991	' -----------------------------'/)
[94]	1992	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1993	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1994	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1995	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1996	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1997	' to i/j =',I4)
	1998	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1999	1X,F5.3, ' m2/s2')
	2000	474 FORMAT (' Random number generator used : ',A/)
	2001	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	2002	'respectively, if'/ &
	2003	' the value is negative) by ',F5.2,' K at the beginning of the',&
	2004	' 3D-simulation'/)
	2005	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	2006	'respectively, if the'/ &
	2007	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	2008	' the 3D-simulation'/)
	2009	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	2010	'respectively, if the'/ &
	2011	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	2012	' the 3D-simulation'/)
	2013	480 FORMAT (' Particles:'/ &
	2014	' ---------'// &
	2015	' Particle advection is active (switched on at t = ', F7.1, &
	2016	' s)'/ &
	2017	' Start of new particle generations every ',F6.1,' s'/ &
	2018	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	2019	' bottom: ', A, ' top: ', A/&
	2020	' Maximum particle age: ',F9.1,' s'/ &
[117]	2021	' Advection stopped at t = ',F9.1,' s'/ &
	2022	' Particles are sorted every ',F9.1,' s'/)
[1]	2023	481 FORMAT (' Particles have random start positions'/)
[336]	2024	482 FORMAT (' Particles are advected only horizontally'/)
[1]	2025	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	2026	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	2027	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	2028	' Maximum age of the end of the tail: ',F8.2,' s')
	2029	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	2030	486 FORMAT (' Particle statistics are written on file'/)
	2031	487 FORMAT (' Number of particle groups: ',I2/)
	2032	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	2033	' minimum timestep for advection: ', F7.5/)
	2034	489 FORMAT (' Number of particles simultaneously released at each ', &
	2035	'point: ', I5/)
	2036	490 FORMAT (' Particle group ',I2,':'/ &
	2037	' Particle radius: ',E10.3, 'm')
	2038	491 FORMAT (' Particle inertia is activated'/ &
	2039	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	2040	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	2041	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	2042	' y:',F8.1,' - ',F8.1,' m'/&
	2043	' z:',F8.1,' - ',F8.1,' m'/&
	2044	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	2045	' m dz = ',F8.1,' m'/)
	2046	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	2047	F8.2,' s'/)
	2048	495 FORMAT (' Number of particles in total domain: ',I10/)
	2049	500 FORMAT (//' 1D-Model parameters:'/ &
	2050	' -------------------'// &
	2051	' Simulation time: ',F8.1,' s'/ &
	2052	' Run-controll output every: ',F8.1,' s'/ &
	2053	' Vertical profile output every: ',F8.1,' s'/ &
	2054	' Mixing length calculation: ',A/ &
	2055	' Dissipation calculation: ',A/)
	2056	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	2057	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2058	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2059
	2060
	2061	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |