Home

Context Navigation

header.f90 @ 759

Last change on this file since 759 was 759, checked in by raasch, 13 years ago

New:
---

The number of parallel I/O operations can be limited with new mrun-option -w.
(advec_particles, data_output_2d, data_output_3d, header, init_grid, init_pegrid, init_3d_model, modules, palm, parin, write_3d_binary)

Changed:

mrun option -T is obligatory

Errors:

Bugfix: No zero assignments to volume_flow_initial and volume_flow_area in
case of normal restart runs. (init_3d_model)

initialization of u_0, v_0. This is just to avoid access of uninitialized
memory in exchange_horiz_2d, which causes respective error messages
when the Intel thread checker (inspector) is used. (production_e)

Bugfix for ts limitation (prandtl_fluxes)

Property svn:keywords set to Id

File size: 77.3 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[759]	6	! output of maximum number of parallel io streams
[392]	7	!
	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 759 2011-09-15 13:58:31Z raasch $
	11	!
[708]	12	! 707 2011-03-29 11:39:40Z raasch
	13	! bc_lr/ns replaced by bc_lr/ns_cyc
	14	!
[668]	15	! 667 2010-12-23 12:06:00Z suehring/gryschka
	16	! Output of advection scheme.
	17	! Modified output of Prandtl-layer height.
	18	!
[581]	19	! 580 2010-10-05 13:59:11Z heinze
	20	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	21	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	22	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	23	!
[494]	24	! 493 2010-03-01 08:30:24Z raasch
	25	! NetCDF data output format extendend for NetCDF4/HDF5
	26	!
[482]	27	! 449 2010-02-02 11:23:59Z raasch
	28	! +large scale vertical motion (subsidence/ascent)
	29	! Bugfix: index problem concerning gradient_level indices removed
	30	!
[449]	31	! 410 2009-12-04 17:05:40Z letzel
	32	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	33	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	34	!
[392]	35	! 346 2009-07-06 10:13:41Z raasch
[328]	36	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	37	! Coupling with independent precursor runs.
[254]	38	! Output of messages replaced by message handling routine.
[336]	39	! Output of several additional dvr parameters
[240]	40	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	41	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	42	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	43	! topography_grid_convention moved from user_header
[292]	44	! small bugfix concerning 3d 64bit netcdf output format
[1]	45	!
[226]	46	! 206 2008-10-13 14:59:11Z raasch
	47	! Bugfix: error in zu index in case of section_xy = -1
	48	!
[200]	49	! 198 2008-09-17 08:55:28Z raasch
	50	! Format adjustments allowing output of larger revision numbers
	51	!
[198]	52	! 197 2008-09-16 15:29:03Z raasch
	53	! allow 100 spectra levels instead of 10 for consistency with
	54	! define_netcdf_header,
	55	! bugfix in the output of the characteristic levels of potential temperature,
	56	! geostrophic wind, scalar concentration, humidity and leaf area density,
	57	! output of turbulence recycling informations
	58	!
[139]	59	! 138 2007-11-28 10:03:58Z letzel
	60	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	61	! Allow two instead of one digit to specify isosurface and slicer variables.
	62	! Output of sorting frequency of particles
	63	!
[110]	64	! 108 2007-08-24 15:10:38Z letzel
	65	! Output of informations for coupled model runs (boundary conditions etc.)
	66	! + output of momentumfluxes at the top boundary
	67	! Rayleigh damping for ocean, e_init
	68	!
[98]	69	! 97 2007-06-21 08:23:15Z raasch
	70	! Adjustments for the ocean version.
	71	! use_pt_reference renamed use_reference
	72	!
[90]	73	! 87 2007-05-22 15:46:47Z raasch
	74	! Bugfix: output of use_upstream_for_tke
	75	!
[83]	76	! 82 2007-04-16 15:40:52Z raasch
	77	! Preprocessor strings for different linux clusters changed to "lc",
	78	! routine local_flush is used for buffer flushing
	79	!
[77]	80	! 76 2007-03-29 00:58:32Z raasch
	81	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	82	! output of the loop optimization method, moisture renamed humidity,
	83	! output of subversion revision number
	84	!
[39]	85	! 19 2007-02-23 04:53:48Z raasch
	86	! Output of scalar flux applied at top boundary
	87	!
[3]	88	! RCS Log replace by Id keyword, revision history cleaned up
	89	!
[1]	90	! Revision 1.63 2006/08/22 13:53:13 raasch
	91	! Output of dz_max
	92	!
	93	! Revision 1.1 1997/08/11 06:17:20 raasch
	94	! Initial revision
	95	!
	96	!
	97	! Description:
	98	! ------------
	99	! Writing a header with all important informations about the actual run.
	100	! This subroutine is called three times, two times at the beginning
	101	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	102	! end of the run, then writing additional information about CPU-usage on file
	103	! header.
[411]	104	!-----------------------------------------------------------------------------!
[1]	105
	106	USE arrays_3d
	107	USE control_parameters
	108	USE cloud_parameters
	109	USE cpulog
	110	USE dvrp_variables
	111	USE grid_variables
	112	USE indices
	113	USE model_1d
	114	USE particle_attributes
	115	USE pegrid
[411]	116	USE subsidence_mod
[1]	117	USE spectrum
	118
	119	IMPLICIT NONE
	120
	121	CHARACTER (LEN=1) :: prec
	122	CHARACTER (LEN=2) :: do2d_mode
	123	CHARACTER (LEN=5) :: section_chr
	124	CHARACTER (LEN=9) :: time_to_string
	125	CHARACTER (LEN=10) :: coor_chr, host_chr
	126	CHARACTER (LEN=16) :: begin_chr
[200]	127	CHARACTER (LEN=23) :: ver_rev
[1]	128	CHARACTER (LEN=40) :: output_format
[167]	129	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	130	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	131	domask_chr, run_classification
[167]	132	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	133	temperatures, ugcomponent, vgcomponent
[1]	134	CHARACTER (LEN=85) :: roben, runten
	135
[410]	136	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	137
	138	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	139	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	140	REAL :: cpuseconds_per_simulated_second
	141
	142	!
	143	!-- Open the output file. At the end of the simulation, output is directed
	144	!-- to unit 19.
	145	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	146	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	147	io = 15 ! header output on file RUN_CONTROL
	148	ELSE
	149	io = 19 ! header output on file HEADER
	150	ENDIF
	151	CALL check_open( io )
	152
	153	!
	154	!-- At the end of the run, output file (HEADER) will be rewritten with
	155	!-- new informations
	156	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	157
	158	!
	159	!-- Determine kind of model run
	160	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	161	run_classification = '3D - restart run'
[328]	162	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	163	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	164	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	165	run_classification = '3D - run without 1D - prerun'
[197]	166	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	167	run_classification = '3D - run with 1D - prerun'
[197]	168	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	169	run_classification = '3D - run initialized by user'
[1]	170	ELSE
[254]	171	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	172	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	173	ENDIF
[97]	174	IF ( ocean ) THEN
	175	run_classification = 'ocean - ' // run_classification
	176	ELSE
	177	run_classification = 'atmosphere - ' // run_classification
	178	ENDIF
[1]	179
	180	!
	181	!-- Run-identification, date, time, host
	182	host_chr = host(1:10)
[75]	183	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	184	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	185	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	186	#if defined( __mpi2 )
	187	mpi_type = 2
	188	#else
	189	mpi_type = 1
	190	#endif
	191	WRITE ( io, 101 ) mpi_type, coupling_mode
	192	ENDIF
[102]	193	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	194	ADJUSTR( host_chr )
[1]	195	#if defined( __parallel )
	196	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	197	char1 = 'calculated'
	198	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	199	host(1:2) == 'lc' ) .AND. &
	200	npex == -1 .AND. pdims(2) == 1 ) THEN
	201	char1 = 'forced'
	202	ELSE
	203	char1 = 'predefined'
	204	ENDIF
	205	IF ( threads_per_task == 1 ) THEN
[102]	206	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	207	ELSE
[102]	208	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	209	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	210	ENDIF
	211	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	212	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	213	npex == -1 .AND. pdims(2) == 1 ) &
	214	THEN
[102]	215	WRITE ( io, 106 )
[1]	216	ELSEIF ( pdims(2) == 1 ) THEN
[102]	217	WRITE ( io, 107 ) 'x'
[1]	218	ELSEIF ( pdims(1) == 1 ) THEN
[102]	219	WRITE ( io, 107 ) 'y'
[1]	220	ENDIF
[102]	221	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[759]	222	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	223	WRITE ( io, 108 ) maximum_parallel_io_streams
	224	ENDIF
[1]	225	#endif
	226	WRITE ( io, 99 )
	227
	228	!
	229	!-- Numerical schemes
	230	WRITE ( io, 110 )
	231	IF ( psolver(1:7) == 'poisfft' ) THEN
	232	WRITE ( io, 111 ) TRIM( fft_method )
	233	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	234	ELSEIF ( psolver == 'sor' ) THEN
	235	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	236	ELSEIF ( psolver == 'multigrid' ) THEN
	237	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	238	IF ( mg_cycles == -1 ) THEN
	239	WRITE ( io, 140 ) residual_limit
	240	ELSE
	241	WRITE ( io, 141 ) mg_cycles
	242	ENDIF
	243	IF ( mg_switch_to_pe0_level == 0 ) THEN
	244	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	245	nzt_mg(1)
[197]	246	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	247	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	248	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	249	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	250	nzt_mg(mg_switch_to_pe0_level), &
	251	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	252	nzt_mg(1)
	253	ENDIF
	254	ENDIF
	255	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	256	THEN
	257	WRITE ( io, 142 )
	258	ENDIF
	259
	260	IF ( momentum_advec == 'pw-scheme' ) THEN
	261	WRITE ( io, 113 )
[667]	262	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	263	WRITE ( io, 503 )
	264	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	265	WRITE ( io, 114 )
	266	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	267	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	268	overshoot_limit_w /= 0.0 ) THEN
	269	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	270	overshoot_limit_w
	271	ENDIF
	272	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	273	ups_limit_w /= 0.0 ) &
	274	THEN
	275	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	276	ENDIF
	277	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	278	ENDIF
	279	IF ( scalar_advec == 'pw-scheme' ) THEN
	280	WRITE ( io, 116 )
[667]	281	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	282	WRITE ( io, 504 )
[1]	283	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	284	WRITE ( io, 117 )
	285	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	286	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	287	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	288	ENDIF
	289	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	290	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	291	ENDIF
	292	ELSE
	293	WRITE ( io, 118 )
	294	ENDIF
[63]	295
	296	WRITE ( io, 139 ) TRIM( loop_optimization )
	297
[1]	298	IF ( galilei_transformation ) THEN
	299	IF ( use_ug_for_galilei_tr ) THEN
	300	char1 = 'geostrophic wind'
	301	ELSE
	302	char1 = 'mean wind in model domain'
	303	ENDIF
	304	IF ( simulated_time_at_begin == simulated_time ) THEN
	305	char2 = 'at the start of the run'
	306	ELSE
	307	char2 = 'at the end of the run'
	308	ENDIF
	309	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	310	advected_distance_x/1000.0, advected_distance_y/1000.0
	311	ENDIF
	312	IF ( timestep_scheme == 'leapfrog' ) THEN
	313	WRITE ( io, 120 )
	314	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	315	WRITE ( io, 121 )
	316	ELSE
	317	WRITE ( io, 122 ) timestep_scheme
	318	ENDIF
[87]	319	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	320	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	321	IF ( .NOT. ocean ) THEN
	322	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	323	rayleigh_damping_factor
	324	ELSE
	325	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	326	rayleigh_damping_factor
	327	ENDIF
[1]	328	ENDIF
[75]	329	IF ( humidity ) THEN
[1]	330	IF ( .NOT. cloud_physics ) THEN
	331	WRITE ( io, 129 )
	332	ELSE
	333	WRITE ( io, 130 )
	334	WRITE ( io, 131 )
	335	IF ( radiation ) WRITE ( io, 132 )
	336	IF ( precipitation ) WRITE ( io, 133 )
	337	ENDIF
	338	ENDIF
	339	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	340	IF ( conserve_volume_flow ) THEN
[241]	341	WRITE ( io, 150 ) conserve_volume_flow_mode
	342	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	343	WRITE ( io, 151 ) u_bulk, v_bulk
	344	ENDIF
[240]	345	ELSEIF ( dp_external ) THEN
	346	IF ( dp_smooth ) THEN
[241]	347	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	348	ELSE
[241]	349	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	350	ENDIF
	351	ENDIF
[411]	352	IF ( large_scale_subsidence ) THEN
	353	WRITE ( io, 153 )
	354	WRITE ( io, 154 )
	355	ENDIF
[1]	356	WRITE ( io, 99 )
	357
	358	!
	359	!-- Runtime and timestep informations
	360	WRITE ( io, 200 )
	361	IF ( .NOT. dt_fixed ) THEN
	362	WRITE ( io, 201 ) dt_max, cfl_factor
	363	ELSE
	364	WRITE ( io, 202 ) dt
	365	ENDIF
	366	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	367
	368	IF ( time_restart /= 9999999.9 .AND. &
	369	simulated_time_at_begin == simulated_time ) THEN
	370	IF ( dt_restart == 9999999.9 ) THEN
	371	WRITE ( io, 204 ) ' Restart at: ',time_restart
	372	ELSE
	373	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	374	ENDIF
	375	ENDIF
	376
	377	IF ( simulated_time_at_begin /= simulated_time ) THEN
	378	i = MAX ( log_point_s(10)%counts, 1 )
	379	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	380	cpuseconds_per_simulated_second = 0.0
	381	ELSE
	382	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	383	( simulated_time - &
	384	simulated_time_at_begin )
	385	ENDIF
	386	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	387	log_point_s(10)%sum / REAL( i ), &
	388	cpuseconds_per_simulated_second
	389	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	390	IF ( dt_restart == 9999999.9 ) THEN
	391	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	392	ELSE
	393	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	394	ENDIF
	395	ENDIF
	396	ENDIF
	397
	398	!
[291]	399	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	400	!-- and ocean are used. In this case, coupling_start_time defines the time
	401	!-- when the coupling is switched on.
	402	IF ( coupling_start_time /= 0.0 ) THEN
	403	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	404	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	405	ELSE
	406	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	407	'precursor runs'
	408	ENDIF
	409	WRITE ( io, 207 ) char1, coupling_start_time
	410	ENDIF
	411
	412	!
[1]	413	!-- Computational grid
[94]	414	IF ( .NOT. ocean ) THEN
	415	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	416	IF ( dz_stretch_level_index < nzt+1 ) THEN
	417	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	418	dz_stretch_factor, dz_max
	419	ENDIF
	420	ELSE
	421	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	422	IF ( dz_stretch_level_index > 0 ) THEN
	423	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	424	dz_stretch_factor, dz_max
	425	ENDIF
[1]	426	ENDIF
	427	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	428	MIN( nnz+2, nzt+2 )
[76]	429	IF ( numprocs > 1 ) THEN
	430	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	431	WRITE ( io, 255 )
	432	ELSE
	433	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	434	ENDIF
[1]	435	ENDIF
	436	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	437
	438	!
	439	!-- Topography
	440	WRITE ( io, 270 ) topography
	441	SELECT CASE ( TRIM( topography ) )
	442
	443	CASE ( 'flat' )
	444	! no actions necessary
	445
	446	CASE ( 'single_building' )
	447	blx = INT( building_length_x / dx )
	448	bly = INT( building_length_y / dy )
	449	bh = INT( building_height / dz )
	450
	451	IF ( building_wall_left == 9999999.9 ) THEN
	452	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	453	ENDIF
	454	bxl = INT ( building_wall_left / dx + 0.5 )
	455	bxr = bxl + blx
	456
	457	IF ( building_wall_south == 9999999.9 ) THEN
	458	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	459	ENDIF
	460	bys = INT ( building_wall_south / dy + 0.5 )
	461	byn = bys + bly
	462
	463	WRITE ( io, 271 ) building_length_x, building_length_y, &
	464	building_height, bxl, bxr, bys, byn
	465
[240]	466	CASE ( 'single_street_canyon' )
	467	ch = NINT( canyon_height / dz )
	468	IF ( canyon_width_x /= 9999999.9 ) THEN
	469	!
	470	!-- Street canyon in y direction
	471	cwx = NINT( canyon_width_x / dx )
	472	IF ( canyon_wall_left == 9999999.9 ) THEN
	473	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	474	ENDIF
	475	cxl = NINT( canyon_wall_left / dx )
	476	cxr = cxl + cwx
	477	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	478
	479	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	480	!
	481	!-- Street canyon in x direction
	482	cwy = NINT( canyon_width_y / dy )
	483	IF ( canyon_wall_south == 9999999.9 ) THEN
	484	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	485	ENDIF
	486	cys = NINT( canyon_wall_south / dy )
	487	cyn = cys + cwy
	488	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	489	ENDIF
	490
[1]	491	END SELECT
	492
[256]	493	IF ( TRIM( topography ) /= 'flat' ) THEN
	494	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	495	IF ( TRIM( topography ) == 'single_building' .OR. &
	496	TRIM( topography ) == 'single_street_canyon' ) THEN
	497	WRITE ( io, 278 )
	498	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	499	WRITE ( io, 279 )
	500	ENDIF
	501	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	502	WRITE ( io, 278 )
	503	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	504	WRITE ( io, 279 )
	505	ENDIF
	506	ENDIF
	507
[138]	508	IF ( plant_canopy ) THEN
	509
	510	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	511	IF ( passive_scalar ) THEN
	512	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	513	leaf_surface_concentration
	514	ENDIF
[138]	515
[1]	516	!
[153]	517	!-- Heat flux at the top of vegetation
	518	WRITE ( io, 282 ) cthf
	519
	520	!
[138]	521	!-- Leaf area density profile
	522	!-- Building output strings, starting with surface value
	523	WRITE ( learde, '(F6.2)' ) lad_surface
	524	gradients = '------'
	525	slices = ' 0'
	526	coordinates = ' 0.0'
	527	i = 1
	528	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	529
	530	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	531	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	532
	533	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	534	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	535
	536	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	537	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	538
	539	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	540	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	541
	542	i = i + 1
	543	ENDDO
	544
[153]	545	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	546	TRIM( gradients ), TRIM( slices )
	547
	548	ENDIF
	549
	550	!
[1]	551	!-- Boundary conditions
	552	IF ( ibc_p_b == 0 ) THEN
	553	runten = 'p(0) = 0 \|'
	554	ELSEIF ( ibc_p_b == 1 ) THEN
	555	runten = 'p(0) = p(1) \|'
	556	ELSE
	557	runten = 'p(0) = p(1) +R\|'
	558	ENDIF
	559	IF ( ibc_p_t == 0 ) THEN
	560	roben = 'p(nzt+1) = 0 \|'
	561	ELSE
	562	roben = 'p(nzt+1) = p(nzt) \|'
	563	ENDIF
	564
	565	IF ( ibc_uv_b == 0 ) THEN
	566	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	567	ELSE
	568	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	569	ENDIF
[132]	570	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	571	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	572	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	573	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	574	ELSE
	575	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	576	ENDIF
	577
	578	IF ( ibc_pt_b == 0 ) THEN
	579	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	580	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	581	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	582	ELSEIF ( ibc_pt_b == 2 ) THEN
	583	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	584	ENDIF
	585	IF ( ibc_pt_t == 0 ) THEN
[19]	586	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	587	ELSEIF( ibc_pt_t == 1 ) THEN
	588	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	589	ELSEIF( ibc_pt_t == 2 ) THEN
	590	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	591
[1]	592	ENDIF
	593
	594	WRITE ( io, 300 ) runten, roben
	595
	596	IF ( .NOT. constant_diffusion ) THEN
	597	IF ( ibc_e_b == 1 ) THEN
	598	runten = 'e(0) = e(1)'
	599	ELSE
	600	runten = 'e(0) = e(1) = (u/0.1)*2'
	601	ENDIF
	602	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	603
[97]	604	WRITE ( io, 301 ) 'e', runten, roben
[1]	605
	606	ENDIF
	607
[97]	608	IF ( ocean ) THEN
	609	runten = 'sa(0) = sa(1)'
	610	IF ( ibc_sa_t == 0 ) THEN
	611	roben = 'sa(nzt+1) = sa_surface'
[1]	612	ELSE
[97]	613	roben = 'sa(nzt+1) = sa(nzt)'
[1]	614	ENDIF
[97]	615	WRITE ( io, 301 ) 'sa', runten, roben
	616	ENDIF
[1]	617
[97]	618	IF ( humidity ) THEN
	619	IF ( ibc_q_b == 0 ) THEN
	620	runten = 'q(0) = q_surface'
	621	ELSE
	622	runten = 'q(0) = q(1)'
	623	ENDIF
	624	IF ( ibc_q_t == 0 ) THEN
	625	roben = 'q(nzt) = q_top'
	626	ELSE
	627	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	628	ENDIF
	629	WRITE ( io, 301 ) 'q', runten, roben
	630	ENDIF
[1]	631
[97]	632	IF ( passive_scalar ) THEN
	633	IF ( ibc_q_b == 0 ) THEN
	634	runten = 's(0) = s_surface'
	635	ELSE
	636	runten = 's(0) = s(1)'
	637	ENDIF
	638	IF ( ibc_q_t == 0 ) THEN
	639	roben = 's(nzt) = s_top'
	640	ELSE
	641	roben = 's(nzt) = s(nzt-1) + ds/dz'
	642	ENDIF
	643	WRITE ( io, 301 ) 's', runten, roben
[1]	644	ENDIF
	645
	646	IF ( use_surface_fluxes ) THEN
	647	WRITE ( io, 303 )
	648	IF ( constant_heatflux ) THEN
	649	WRITE ( io, 306 ) surface_heatflux
	650	IF ( random_heatflux ) WRITE ( io, 307 )
	651	ENDIF
[75]	652	IF ( humidity .AND. constant_waterflux ) THEN
[1]	653	WRITE ( io, 311 ) surface_waterflux
	654	ENDIF
	655	IF ( passive_scalar .AND. constant_waterflux ) THEN
	656	WRITE ( io, 313 ) surface_waterflux
	657	ENDIF
	658	ENDIF
	659
[19]	660	IF ( use_top_fluxes ) THEN
	661	WRITE ( io, 304 )
[102]	662	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	663	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	664	IF ( constant_top_heatflux ) THEN
	665	WRITE ( io, 306 ) top_heatflux
	666	ENDIF
	667	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	668	WRITE ( io, 316 )
[19]	669	ENDIF
[97]	670	IF ( ocean .AND. constant_top_salinityflux ) THEN
	671	WRITE ( io, 309 ) top_salinityflux
	672	ENDIF
[75]	673	IF ( humidity .OR. passive_scalar ) THEN
[19]	674	WRITE ( io, 315 )
	675	ENDIF
	676	ENDIF
	677
[1]	678	IF ( prandtl_layer ) THEN
[667]	679	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	680	rif_min, rif_max
[1]	681	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	682	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	683	WRITE ( io, 312 )
	684	ENDIF
	685	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	686	WRITE ( io, 314 )
	687	ENDIF
	688	ELSE
	689	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	690	WRITE ( io, 310 ) rif_min, rif_max
	691	ENDIF
	692	ENDIF
	693
	694	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	695	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	696	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	697	IF ( turbulent_inflow ) THEN
	698	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	699	inflow_damping_height, inflow_damping_width
	700	ENDIF
[1]	701	ENDIF
	702
	703	!
	704	!-- Listing of 1D-profiles
[151]	705	WRITE ( io, 325 ) dt_dopr_listing
[1]	706	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	707	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	708	ENDIF
	709
	710	!
	711	!-- DATA output
	712	WRITE ( io, 330 )
	713	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	714	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	715	ENDIF
	716
	717	!
	718	!-- 1D-profiles
[346]	719	dopr_chr = 'Profile:'
[1]	720	IF ( dopr_n /= 0 ) THEN
	721	WRITE ( io, 331 )
	722
	723	output_format = ''
	724	IF ( netcdf_output ) THEN
[493]	725	IF ( netcdf_data_format == 1 ) THEN
	726	output_format = 'NetCDF classic'
[1]	727	ELSE
[493]	728	output_format = 'NetCDF 64bit offset'
[1]	729	ENDIF
	730	ENDIF
	731	IF ( profil_output ) THEN
	732	IF ( netcdf_output ) THEN
	733	output_format = TRIM( output_format ) // ' and profil'
	734	ELSE
	735	output_format = 'profil'
	736	ENDIF
	737	ENDIF
[292]	738	WRITE ( io, 344 ) output_format
[1]	739
	740	DO i = 1, dopr_n
	741	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	742	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	743	WRITE ( io, 332 ) dopr_chr
	744	dopr_chr = ' :'
	745	ENDIF
	746	ENDDO
	747
	748	IF ( dopr_chr /= '' ) THEN
	749	WRITE ( io, 332 ) dopr_chr
	750	ENDIF
	751	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	752	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	753	ENDIF
	754
	755	!
	756	!-- 2D-arrays
	757	DO av = 0, 1
	758
	759	i = 1
	760	do2d_xy = ''
	761	do2d_xz = ''
	762	do2d_yz = ''
	763	DO WHILE ( do2d(av,i) /= ' ' )
	764
	765	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	766	do2d_mode = do2d(av,i)(l-1:l)
	767
	768	SELECT CASE ( do2d_mode )
	769	CASE ( 'xy' )
	770	ll = LEN_TRIM( do2d_xy )
	771	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	772	CASE ( 'xz' )
	773	ll = LEN_TRIM( do2d_xz )
	774	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	775	CASE ( 'yz' )
	776	ll = LEN_TRIM( do2d_yz )
	777	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	778	END SELECT
	779
	780	i = i + 1
	781
	782	ENDDO
	783
	784	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	785	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	786	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	787	( netcdf_output .OR. iso2d_output ) ) THEN
	788
	789	IF ( av == 0 ) THEN
	790	WRITE ( io, 334 ) ''
	791	ELSE
	792	WRITE ( io, 334 ) '(time-averaged)'
	793	ENDIF
	794
	795	IF ( do2d_at_begin ) THEN
	796	begin_chr = 'and at the start'
	797	ELSE
	798	begin_chr = ''
	799	ENDIF
	800
	801	output_format = ''
	802	IF ( netcdf_output ) THEN
[493]	803	IF ( netcdf_data_format == 1 ) THEN
	804	output_format = 'NetCDF classic'
	805	ELSEIF ( netcdf_data_format == 2 ) THEN
	806	output_format = 'NetCDF 64bit offset'
	807	ELSEIF ( netcdf_data_format == 3 ) THEN
	808	output_format = 'NetCDF4/HDF5'
	809	ELSEIF ( netcdf_data_format == 4 ) THEN
	810	output_format = 'NetCDF4/HDF5 clasic'
[1]	811	ENDIF
	812	ENDIF
	813	IF ( iso2d_output ) THEN
	814	IF ( netcdf_output ) THEN
	815	output_format = TRIM( output_format ) // ' and iso2d'
	816	ELSE
	817	output_format = 'iso2d'
	818	ENDIF
	819	ENDIF
[292]	820	WRITE ( io, 344 ) output_format
[1]	821
	822	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	823	i = 1
	824	slices = '/'
	825	coordinates = '/'
	826	!
	827	!-- Building strings with index and coordinate informations of the
	828	!-- slices
	829	DO WHILE ( section(i,1) /= -9999 )
	830
	831	WRITE (section_chr,'(I5)') section(i,1)
	832	section_chr = ADJUSTL( section_chr )
	833	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	834
[206]	835	IF ( section(i,1) == -1 ) THEN
	836	WRITE (coor_chr,'(F10.1)') -1.0
	837	ELSE
	838	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	839	ENDIF
[1]	840	coor_chr = ADJUSTL( coor_chr )
	841	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	842
	843	i = i + 1
	844	ENDDO
	845	IF ( av == 0 ) THEN
	846	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	847	TRIM( begin_chr ), 'k', TRIM( slices ), &
	848	TRIM( coordinates )
	849	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	850	WRITE ( io, 339 ) skip_time_do2d_xy
	851	ENDIF
	852	ELSE
	853	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	854	TRIM( begin_chr ), averaging_interval, &
	855	dt_averaging_input, 'k', TRIM( slices ), &
	856	TRIM( coordinates )
	857	IF ( skip_time_data_output_av /= 0.0 ) THEN
	858	WRITE ( io, 339 ) skip_time_data_output_av
	859	ENDIF
	860	ENDIF
	861
	862	ENDIF
	863
	864	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	865	i = 1
	866	slices = '/'
	867	coordinates = '/'
	868	!
	869	!-- Building strings with index and coordinate informations of the
	870	!-- slices
	871	DO WHILE ( section(i,2) /= -9999 )
	872
	873	WRITE (section_chr,'(I5)') section(i,2)
	874	section_chr = ADJUSTL( section_chr )
	875	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	876
	877	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	878	coor_chr = ADJUSTL( coor_chr )
	879	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	880
	881	i = i + 1
	882	ENDDO
	883	IF ( av == 0 ) THEN
	884	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	885	TRIM( begin_chr ), 'j', TRIM( slices ), &
	886	TRIM( coordinates )
	887	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	888	WRITE ( io, 339 ) skip_time_do2d_xz
	889	ENDIF
	890	ELSE
	891	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	892	TRIM( begin_chr ), averaging_interval, &
	893	dt_averaging_input, 'j', TRIM( slices ), &
	894	TRIM( coordinates )
	895	IF ( skip_time_data_output_av /= 0.0 ) THEN
	896	WRITE ( io, 339 ) skip_time_data_output_av
	897	ENDIF
	898	ENDIF
	899	ENDIF
	900
	901	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	902	i = 1
	903	slices = '/'
	904	coordinates = '/'
	905	!
	906	!-- Building strings with index and coordinate informations of the
	907	!-- slices
	908	DO WHILE ( section(i,3) /= -9999 )
	909
	910	WRITE (section_chr,'(I5)') section(i,3)
	911	section_chr = ADJUSTL( section_chr )
	912	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	913
	914	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	915	coor_chr = ADJUSTL( coor_chr )
	916	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	917
	918	i = i + 1
	919	ENDDO
	920	IF ( av == 0 ) THEN
	921	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	922	TRIM( begin_chr ), 'i', TRIM( slices ), &
	923	TRIM( coordinates )
	924	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	925	WRITE ( io, 339 ) skip_time_do2d_yz
	926	ENDIF
	927	ELSE
	928	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	929	TRIM( begin_chr ), averaging_interval, &
	930	dt_averaging_input, 'i', TRIM( slices ), &
	931	TRIM( coordinates )
	932	IF ( skip_time_data_output_av /= 0.0 ) THEN
	933	WRITE ( io, 339 ) skip_time_data_output_av
	934	ENDIF
	935	ENDIF
	936	ENDIF
	937
	938	ENDIF
	939
	940	ENDDO
	941
	942	!
	943	!-- 3d-arrays
	944	DO av = 0, 1
	945
	946	i = 1
	947	do3d_chr = ''
	948	DO WHILE ( do3d(av,i) /= ' ' )
	949
	950	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	951	i = i + 1
	952
	953	ENDDO
	954
	955	IF ( do3d_chr /= '' ) THEN
	956	IF ( av == 0 ) THEN
	957	WRITE ( io, 336 ) ''
	958	ELSE
	959	WRITE ( io, 336 ) '(time-averaged)'
	960	ENDIF
	961
	962	output_format = ''
	963	IF ( netcdf_output ) THEN
[493]	964	IF ( netcdf_data_format == 1 ) THEN
	965	output_format = 'NetCDF classic'
	966	ELSEIF ( netcdf_data_format == 2 ) THEN
	967	output_format = 'NetCDF 64bit offset'
	968	ELSEIF ( netcdf_data_format == 3 ) THEN
	969	output_format = 'NetCDF4/HDF5'
	970	ELSEIF ( netcdf_data_format == 4 ) THEN
	971	output_format = 'NetCDF4/HDF5 clasic'
[1]	972	ENDIF
	973	ENDIF
	974	IF ( avs_output ) THEN
	975	IF ( netcdf_output ) THEN
	976	output_format = TRIM( output_format ) // ' and avs'
	977	ELSE
	978	output_format = 'avs'
	979	ENDIF
	980	ENDIF
[292]	981	WRITE ( io, 344 ) output_format
[1]	982
	983	IF ( do3d_at_begin ) THEN
	984	begin_chr = 'and at the start'
	985	ELSE
	986	begin_chr = ''
	987	ENDIF
	988	IF ( av == 0 ) THEN
	989	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	990	zu(nz_do3d), nz_do3d
	991	ELSE
	992	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	993	TRIM( begin_chr ), averaging_interval, &
	994	dt_averaging_input, zu(nz_do3d), nz_do3d
	995	ENDIF
	996
	997	IF ( do3d_compress ) THEN
	998	do3d_chr = ''
	999	i = 1
	1000	DO WHILE ( do3d(av,i) /= ' ' )
	1001
	1002	SELECT CASE ( do3d(av,i) )
	1003	CASE ( 'u' )
	1004	j = 1
	1005	CASE ( 'v' )
	1006	j = 2
	1007	CASE ( 'w' )
	1008	j = 3
	1009	CASE ( 'p' )
	1010	j = 4
	1011	CASE ( 'pt' )
	1012	j = 5
	1013	END SELECT
	1014	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1015	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1016	':' // prec // ','
	1017	i = i + 1
	1018
	1019	ENDDO
	1020	WRITE ( io, 338 ) do3d_chr
	1021
	1022	ENDIF
	1023
	1024	IF ( av == 0 ) THEN
	1025	IF ( skip_time_do3d /= 0.0 ) THEN
	1026	WRITE ( io, 339 ) skip_time_do3d
	1027	ENDIF
	1028	ELSE
	1029	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1030	WRITE ( io, 339 ) skip_time_data_output_av
	1031	ENDIF
	1032	ENDIF
	1033
	1034	ENDIF
	1035
	1036	ENDDO
	1037
	1038	!
[410]	1039	!-- masked arrays
	1040	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1041	mask_scale_x, mask_scale_y, mask_scale_z
	1042	DO mid = 1, masks
	1043	DO av = 0, 1
	1044
	1045	i = 1
	1046	domask_chr = ''
	1047	DO WHILE ( domask(mid,av,i) /= ' ' )
	1048	domask_chr = TRIM( domask_chr ) // ' ' // &
	1049	TRIM( domask(mid,av,i) ) // ','
	1050	i = i + 1
	1051	ENDDO
	1052
	1053	IF ( domask_chr /= '' ) THEN
	1054	IF ( av == 0 ) THEN
	1055	WRITE ( io, 346 ) '', mid
	1056	ELSE
	1057	WRITE ( io, 346 ) ' (time-averaged)', mid
	1058	ENDIF
	1059
	1060	output_format = ''
	1061	IF ( netcdf_output ) THEN
[493]	1062	IF ( netcdf_data_format == 1 ) THEN
	1063	output_format = 'NetCDF classic'
	1064	ELSEIF ( netcdf_data_format == 2 ) THEN
	1065	output_format = 'NetCDF 64bit offset'
	1066	ELSEIF ( netcdf_data_format == 3 ) THEN
	1067	output_format = 'NetCDF4/HDF5'
	1068	ELSEIF ( netcdf_data_format == 4 ) THEN
	1069	output_format = 'NetCDF4/HDF5 clasic'
	1070	ENDIF
[410]	1071	ENDIF
	1072	WRITE ( io, 344 ) output_format
	1073
	1074	IF ( av == 0 ) THEN
	1075	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1076	ELSE
	1077	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1078	averaging_interval, dt_averaging_input
	1079	ENDIF
	1080
	1081	IF ( av == 0 ) THEN
	1082	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1083	WRITE ( io, 339 ) skip_time_domask(mid)
	1084	ENDIF
	1085	ELSE
	1086	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1087	WRITE ( io, 339 ) skip_time_data_output_av
	1088	ENDIF
	1089	ENDIF
	1090	!
	1091	!-- output locations
	1092	DO dim = 1, 3
	1093	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1094	count = 0
	1095	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1096	count = count + 1
	1097	ENDDO
	1098	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1099	mask(mid,dim,:count)
	1100	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1101	mask_loop(mid,dim,2) < 0.0 .AND. &
	1102	mask_loop(mid,dim,3) == 0.0 ) THEN
	1103	WRITE ( io, 350 ) dir(dim), dir(dim)
	1104	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1105	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1106	mask_loop(mid,dim,1:2)
	1107	ELSE
	1108	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1109	mask_loop(mid,dim,1:3)
	1110	ENDIF
	1111	ENDDO
	1112	ENDIF
	1113
	1114	ENDDO
	1115	ENDDO
	1116
	1117	!
[1]	1118	!-- Timeseries
	1119	IF ( dt_dots /= 9999999.9 ) THEN
	1120	WRITE ( io, 340 )
	1121
	1122	output_format = ''
	1123	IF ( netcdf_output ) THEN
[493]	1124	IF ( netcdf_data_format == 1 ) THEN
	1125	output_format = 'NetCDF classic'
[1]	1126	ELSE
[493]	1127	output_format = 'NetCDF 64bit offset'
[1]	1128	ENDIF
	1129	ENDIF
	1130	IF ( profil_output ) THEN
	1131	IF ( netcdf_output ) THEN
	1132	output_format = TRIM( output_format ) // ' and profil'
	1133	ELSE
	1134	output_format = 'profil'
	1135	ENDIF
	1136	ENDIF
[292]	1137	WRITE ( io, 344 ) output_format
[1]	1138	WRITE ( io, 341 ) dt_dots
	1139	ENDIF
	1140
	1141	#if defined( __dvrp_graphics )
	1142	!
	1143	!-- Dvrp-output
	1144	IF ( dt_dvrp /= 9999999.9 ) THEN
	1145	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1146	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1147	i = 1
	1148	l = 0
[336]	1149	m = 0
[1]	1150	DO WHILE ( mode_dvrp(i) /= ' ' )
	1151	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1152	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1153	l = l + 1
	1154	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1155	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1156	isosurface_color(:,l)
[1]	1157	ENDIF
	1158	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1159	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1160	m = m + 1
	1161	IF ( do2d(0,j) /= ' ' ) THEN
	1162	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1163	slicer_range_limits_dvrp(:,m)
	1164	ENDIF
[1]	1165	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1166	WRITE ( io, 363 ) dvrp_psize
	1167	IF ( particle_dvrpsize /= 'none' ) THEN
	1168	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1169	dvrpsize_interval
	1170	ENDIF
	1171	IF ( particle_color /= 'none' ) THEN
	1172	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1173	color_interval
	1174	ENDIF
[1]	1175	ENDIF
	1176	i = i + 1
	1177	ENDDO
[237]	1178
[336]	1179	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1180	superelevation_y, superelevation, clip_dvrp_l, &
	1181	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1182
	1183	IF ( TRIM( topography ) /= 'flat' ) THEN
	1184	WRITE ( io, 366 ) topography_color
	1185	IF ( cluster_size > 1 ) THEN
	1186	WRITE ( io, 367 ) cluster_size
	1187	ENDIF
[237]	1188	ENDIF
	1189
[1]	1190	ENDIF
	1191	#endif
	1192
	1193	#if defined( __spectra )
	1194	!
	1195	!-- Spectra output
	1196	IF ( dt_dosp /= 9999999.9 ) THEN
	1197	WRITE ( io, 370 )
	1198
	1199	output_format = ''
	1200	IF ( netcdf_output ) THEN
[493]	1201	IF ( netcdf_data_format == 1 ) THEN
	1202	output_format = 'NetCDF classic'
[1]	1203	ELSE
[493]	1204	output_format = 'NetCDF 64bit offset'
[1]	1205	ENDIF
	1206	ENDIF
	1207	IF ( profil_output ) THEN
	1208	IF ( netcdf_output ) THEN
	1209	output_format = TRIM( output_format ) // ' and profil'
	1210	ELSE
	1211	output_format = 'profil'
	1212	ENDIF
	1213	ENDIF
[292]	1214	WRITE ( io, 344 ) output_format
[1]	1215	WRITE ( io, 371 ) dt_dosp
	1216	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1217	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1218	( spectra_direction(i), i = 1,10 ), &
[189]	1219	( comp_spectra_level(i), i = 1,100 ), &
	1220	( plot_spectra_level(i), i = 1,100 ), &
[1]	1221	averaging_interval_sp, dt_averaging_input_pr
	1222	ENDIF
	1223	#endif
	1224
	1225	WRITE ( io, 99 )
	1226
	1227	!
	1228	!-- Physical quantities
	1229	WRITE ( io, 400 )
	1230
	1231	!
	1232	!-- Geostrophic parameters
	1233	WRITE ( io, 410 ) omega, phi, f, fs
	1234
	1235	!
	1236	!-- Other quantities
	1237	WRITE ( io, 411 ) g
[97]	1238	IF ( use_reference ) THEN
	1239	IF ( ocean ) THEN
	1240	WRITE ( io, 412 ) prho_reference
	1241	ELSE
	1242	WRITE ( io, 413 ) pt_reference
	1243	ENDIF
	1244	ENDIF
[1]	1245
	1246	!
	1247	!-- Cloud physics parameters
	1248	IF ( cloud_physics ) THEN
[57]	1249	WRITE ( io, 415 )
	1250	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1251	ENDIF
	1252
	1253	!-- Profile of the geostrophic wind (component ug)
	1254	!-- Building output strings
	1255	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1256	gradients = '------'
	1257	slices = ' 0'
	1258	coordinates = ' 0.0'
	1259	i = 1
	1260	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1261
[167]	1262	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1263	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1264
[167]	1265	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1266	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1267
[167]	1268	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1269	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1272	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1273
[430]	1274	IF ( i == 10 ) THEN
	1275	EXIT
	1276	ELSE
	1277	i = i + 1
	1278	ENDIF
	1279
[1]	1280	ENDDO
	1281
	1282	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1283	TRIM( gradients ), TRIM( slices )
	1284
	1285	!-- Profile of the geostrophic wind (component vg)
	1286	!-- Building output strings
	1287	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1288	gradients = '------'
	1289	slices = ' 0'
	1290	coordinates = ' 0.0'
	1291	i = 1
	1292	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1293
[167]	1294	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1295	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1296
[167]	1297	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1298	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1299
[167]	1300	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1301	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1302
[167]	1303	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1304	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1305
[430]	1306	IF ( i == 10 ) THEN
	1307	EXIT
	1308	ELSE
	1309	i = i + 1
	1310	ENDIF
	1311
[1]	1312	ENDDO
	1313
	1314	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1315	TRIM( gradients ), TRIM( slices )
	1316
	1317	!
	1318	!-- Initial temperature profile
	1319	!-- Building output strings, starting with surface temperature
	1320	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1321	gradients = '------'
	1322	slices = ' 0'
	1323	coordinates = ' 0.0'
	1324	i = 1
	1325	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1326
[94]	1327	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1328	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1329
[94]	1330	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1331	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1332
[94]	1333	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1334	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1335
[94]	1336	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1337	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1338
[430]	1339	IF ( i == 10 ) THEN
	1340	EXIT
	1341	ELSE
	1342	i = i + 1
	1343	ENDIF
	1344
[1]	1345	ENDDO
	1346
	1347	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1348	TRIM( gradients ), TRIM( slices )
	1349
	1350	!
	1351	!-- Initial humidity profile
	1352	!-- Building output strings, starting with surface humidity
[75]	1353	IF ( humidity .OR. passive_scalar ) THEN
[1]	1354	WRITE ( temperatures, '(E8.1)' ) q_surface
	1355	gradients = '--------'
	1356	slices = ' 0'
	1357	coordinates = ' 0.0'
	1358	i = 1
	1359	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1360
	1361	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1362	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1363
	1364	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1365	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1366
	1367	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1368	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1369
	1370	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1371	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1372
[430]	1373	IF ( i == 10 ) THEN
	1374	EXIT
	1375	ELSE
	1376	i = i + 1
	1377	ENDIF
	1378
[1]	1379	ENDDO
	1380
[75]	1381	IF ( humidity ) THEN
[1]	1382	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1383	TRIM( gradients ), TRIM( slices )
	1384	ELSE
	1385	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1386	TRIM( gradients ), TRIM( slices )
	1387	ENDIF
	1388	ENDIF
	1389
	1390	!
[97]	1391	!-- Initial salinity profile
	1392	!-- Building output strings, starting with surface salinity
	1393	IF ( ocean ) THEN
	1394	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1395	gradients = '------'
	1396	slices = ' 0'
	1397	coordinates = ' 0.0'
	1398	i = 1
	1399	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1400
	1401	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1402	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1403
	1404	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1405	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1406
	1407	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1408	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1409
	1410	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1411	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1412
[430]	1413	IF ( i == 10 ) THEN
	1414	EXIT
	1415	ELSE
	1416	i = i + 1
	1417	ENDIF
	1418
[97]	1419	ENDDO
	1420
	1421	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1422	TRIM( gradients ), TRIM( slices )
	1423	ENDIF
	1424
	1425	!
[411]	1426	!-- Profile for the large scale vertial velocity
	1427	!-- Building output strings, starting with surface value
	1428	IF ( large_scale_subsidence ) THEN
	1429	temperatures = ' 0.0'
	1430	gradients = '------'
	1431	slices = ' 0'
	1432	coordinates = ' 0.0'
	1433	i = 1
[580]	1434	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1435
	1436	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1437	w_subs(subs_vertical_gradient_level_i(i))
[411]	1438	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1439
[580]	1440	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1441	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1442
[580]	1443	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1444	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1445
[580]	1446	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1447	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1448
[430]	1449	IF ( i == 10 ) THEN
	1450	EXIT
	1451	ELSE
	1452	i = i + 1
	1453	ENDIF
	1454
[411]	1455	ENDDO
	1456
	1457	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1458	TRIM( gradients ), TRIM( slices )
	1459	ENDIF
	1460
	1461	!
[1]	1462	!-- LES / turbulence parameters
	1463	WRITE ( io, 450 )
	1464
	1465	!--
	1466	! ... LES-constants used must still be added here
	1467	!--
	1468	IF ( constant_diffusion ) THEN
	1469	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1470	prandtl_number
	1471	ENDIF
	1472	IF ( .NOT. constant_diffusion) THEN
[108]	1473	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1474	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1475	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1476	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1477	ENDIF
	1478
	1479	!
	1480	!-- Special actions during the run
	1481	WRITE ( io, 470 )
	1482	IF ( create_disturbances ) THEN
	1483	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1484	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1485	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1486	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1487	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1488	ELSE
	1489	WRITE ( io, 473 ) disturbance_energy_limit
	1490	ENDIF
	1491	WRITE ( io, 474 ) TRIM( random_generator )
	1492	ENDIF
	1493	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1494	WRITE ( io, 475 ) pt_surface_initial_change
	1495	ENDIF
[75]	1496	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1497	WRITE ( io, 476 ) q_surface_initial_change
	1498	ENDIF
	1499	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1500	WRITE ( io, 477 ) q_surface_initial_change
	1501	ENDIF
	1502
[60]	1503	IF ( particle_advection ) THEN
[1]	1504	!
[60]	1505	!-- Particle attributes
	1506	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1507	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1508	end_time_prel, dt_sort_particles
[60]	1509	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1510	IF ( random_start_position ) WRITE ( io, 481 )
	1511	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1512	WRITE ( io, 495 ) total_number_of_particles
	1513	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1514	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1515	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1516	WRITE ( io, 484 ) total_number_of_tails, &
	1517	minimum_tailpoint_distance, &
	1518	maximum_tailpoint_age
	1519	ENDIF
[1]	1520	ENDIF
[60]	1521	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1522	WRITE ( io, 485 ) dt_write_particle_data
	1523	output_format = ''
	1524	IF ( netcdf_output ) THEN
[493]	1525	IF ( netcdf_data_format > 1 ) THEN
[60]	1526	output_format = 'netcdf (64 bit offset) and binary'
	1527	ELSE
	1528	output_format = 'netcdf and binary'
	1529	ENDIF
[1]	1530	ELSE
[60]	1531	output_format = 'binary'
[1]	1532	ENDIF
[292]	1533	WRITE ( io, 344 ) output_format
[1]	1534	ENDIF
[60]	1535	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1536	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1537
[60]	1538	WRITE ( io, 487 ) number_of_particle_groups
[1]	1539
[60]	1540	DO i = 1, number_of_particle_groups
	1541	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1542	WRITE ( io, 490 ) i, 0.0
	1543	WRITE ( io, 492 )
[1]	1544	ELSE
[60]	1545	WRITE ( io, 490 ) i, radius(i)
	1546	IF ( density_ratio(i) /= 0.0 ) THEN
	1547	WRITE ( io, 491 ) density_ratio(i)
	1548	ELSE
	1549	WRITE ( io, 492 )
	1550	ENDIF
[1]	1551	ENDIF
[60]	1552	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1553	pdx(i), pdy(i), pdz(i)
[336]	1554	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1555	ENDDO
[1]	1556
[60]	1557	ENDIF
[1]	1558
[60]	1559
[1]	1560	!
	1561	!-- Parameters of 1D-model
	1562	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1563	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1564	mixing_length_1d, dissipation_1d
	1565	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1566	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1567	ENDIF
	1568	ENDIF
	1569
	1570	!
	1571	!-- User-defined informations
	1572	CALL user_header( io )
	1573
	1574	WRITE ( io, 99 )
	1575
	1576	!
	1577	!-- Write buffer contents to disc immediately
[82]	1578	CALL local_flush( io )
[1]	1579
	1580	!
	1581	!-- Here the FORMATs start
	1582
	1583	99 FORMAT (1X,78('-'))
[200]	1584	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1585	1X,'* ',A,' *',9X,A/ &
	1586	1X,'***************************',9X,42('-'))
[291]	1587	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1588	37X,42('-'))
[200]	1589	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1590	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1591	' Run on host: ',A10)
[1]	1592	#if defined( __parallel )
[200]	1593	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1594	')',1X,A)
[200]	1595	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1596	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1597	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1598	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1599	37X,'because the job is running on an SMP-cluster')
[102]	1600	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[759]	1601	108 FORMAT (37X,'Max. # of parallel I/O streams is ',I5)
[1]	1602	#endif
	1603	110 FORMAT (/' Numerical Schemes:'/ &
	1604	' -----------------'/)
	1605	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1606	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1607	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1608	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1609	' or Upstream')
	1610	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1611	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1612	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1613	' or Upstream')
	1614	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1615	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1616	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1617	' Translation velocity = ',A/ &
	1618	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1619	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1620	' of timestep changes)')
	1621	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1622	' timestep changes')
	1623	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1624	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1625	' maximum damping coefficient: ',F5.3, ' 1/s')
	1626	124 FORMAT (' Spline-overshoots are being suppressed')
	1627	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1628	' of'/ &
	1629	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1630	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1631	' of'/ &
	1632	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1633	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1634	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1635	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1636	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1637	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1638	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1639	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1640	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1641	' effective emissivity scheme')
	1642	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1643	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1644	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1645	A,'-cycle)'/ &
	1646	' number of grid levels: ',I2/ &
	1647	' Gauss-Seidel red/black iterations: ',I2)
	1648	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1649	I3,')')
	1650	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1651	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1652	I3,')'/ &
	1653	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1654	I3,')')
	1655	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1656	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1657	140 FORMAT (' maximum residual allowed: ',E10.3)
	1658	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1659	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1660	'step')
[87]	1661	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1662	'kinetic energy')
[1]	1663	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1664	'conserved'/ &
	1665	' using the ',A,' mode')
	1666	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1667	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1668	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1669	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1670	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1671	'prognostic equation for')
	1672	154 FORMAT (' the potential temperature')
[1]	1673	200 FORMAT (//' Run time and time step information:'/ &
	1674	' ----------------------------------'/)
	1675	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1676	' CFL-factor: ',F4.2)
	1677	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1678	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1679	' End time: ',F9.3,' s')
	1680	204 FORMAT ( A,F9.3,' s')
	1681	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1682	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1683	' CPU-time used: ',F9.3,' s per timestep: ', &
	1684	' ',F9.3,' s'/ &
	1685	' per second of simulated tim', &
	1686	'e: ',F9.3,' s')
[291]	1687	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1688	250 FORMAT (//' Computational grid and domain size:'/ &
	1689	' ----------------------------------'// &
	1690	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1691	' m dz = ',F7.3,' m'/ &
	1692	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1693	' m z(u) = ',F10.3,' m'/)
	1694	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1695	' factor: ',F5.3/ &
	1696	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1697	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1698	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1699	255 FORMAT (' Subdomains have equal size')
	1700	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1701	'have smaller sizes'/ &
	1702	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1703	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1704	' degrees')
	1705	270 FORMAT (//' Topography informations:'/ &
	1706	' -----------------------'// &
	1707	1X,'Topography: ',A)
	1708	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1709	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1710	' / ',I4)
[240]	1711	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1712	' direction' / &
	1713	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1714	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1715	278 FORMAT (' Topography grid definition convention:'/ &
	1716	' cell edge (staggered grid points'/ &
	1717	' (u in x-direction, v in y-direction))' /)
	1718	279 FORMAT (' Topography grid definition convention:'/ &
	1719	' cell center (scalar grid points)' /)
[138]	1720	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1721	' ------------------------------'// &
	1722	' Canopy mode: ', A / &
	1723	' Canopy top: ',I4 / &
	1724	' Leaf drag coefficient: ',F6.2 /)
[153]	1725	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1726	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1727	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1728	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1729	' Height: ',A,' m'/ &
	1730	' Leaf area density: ',A,' m2/m3'/ &
	1731	' Gradient: ',A,' m2/m4'/ &
	1732	' Gridpoint: ',A)
	1733
[1]	1734	300 FORMAT (//' Boundary conditions:'/ &
	1735	' -------------------'// &
	1736	' p uv ', &
	1737	' pt'// &
	1738	' B. bound.: ',A/ &
	1739	' T. bound.: ',A)
[97]	1740	301 FORMAT (/' ',A// &
[1]	1741	' B. bound.: ',A/ &
	1742	' T. bound.: ',A)
[19]	1743	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1744	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1745	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1746	'computational u,v-level:'// &
[1]	1747	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1748	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1749	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1750	307 FORMAT (' Heatflux has a random normal distribution')
	1751	308 FORMAT (' Predefined surface temperature')
[97]	1752	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1753	310 FORMAT (//' 1D-Model:'// &
	1754	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1755	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1756	312 FORMAT (' Predefined surface humidity')
	1757	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1758	314 FORMAT (' Predefined scalar value at the surface')
[19]	1759	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1760	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1761	'atmosphere model')
[1]	1762	317 FORMAT (//' Lateral boundaries:'/ &
	1763	' left/right: ',A/ &
	1764	' north/south: ',A)
	1765	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1766	'max =',F5.1,' m**2/s')
[151]	1767	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1768	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1769	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1770	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1771	' v: ',F9.6,' m2/s2')
[151]	1772	325 FORMAT (//' List output:'/ &
[1]	1773	' -----------'// &
	1774	' 1D-Profiles:'/ &
	1775	' Output every ',F8.2,' s')
[151]	1776	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1777	' Averaging input every ',F8.2,' s')
	1778	330 FORMAT (//' Data output:'/ &
	1779	' -----------'/)
	1780	331 FORMAT (/' 1D-Profiles:')
	1781	332 FORMAT (/' ',A)
	1782	333 FORMAT (' Output every ',F8.2,' s',/ &
	1783	' Time averaged over ',F8.2,' s'/ &
	1784	' Averaging input every ',F8.2,' s')
	1785	334 FORMAT (/' 2D-Arrays',A,':')
	1786	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1787	' Output every ',F8.2,' s ',A/ &
	1788	' Cross sections at ',A1,' = ',A/ &
	1789	' scalar-coordinates: ',A,' m'/)
	1790	336 FORMAT (/' 3D-Arrays',A,':')
	1791	337 FORMAT (/' Arrays: ',A/ &
	1792	' Output every ',F8.2,' s ',A/ &
	1793	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1794	338 FORMAT (' Compressed data output'/ &
	1795	' Decimal precision: ',A/)
	1796	339 FORMAT (' No output during initial ',F8.2,' s')
	1797	340 FORMAT (/' Time series:')
	1798	341 FORMAT (' Output every ',F8.2,' s'/)
	1799	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1800	' Output every ',F8.2,' s ',A/ &
	1801	' Time averaged over ',F8.2,' s'/ &
	1802	' Averaging input every ',F8.2,' s'/ &
	1803	' Cross sections at ',A1,' = ',A/ &
	1804	' scalar-coordinates: ',A,' m'/)
	1805	343 FORMAT (/' Arrays: ',A/ &
	1806	' Output every ',F8.2,' s ',A/ &
	1807	' Time averaged over ',F8.2,' s'/ &
	1808	' Averaging input every ',F8.2,' s'/ &
	1809	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1810	344 FORMAT (' Output format: ',A/)
[410]	1811	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1812	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1813	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1814	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1815	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1816	347 FORMAT (' Variables: ',A/ &
	1817	' Output every ',F8.2,' s')
	1818	348 FORMAT (' Variables: ',A/ &
	1819	' Output every ',F8.2,' s'/ &
	1820	' Time averaged over ',F8.2,' s'/ &
	1821	' Averaging input every ',F8.2,' s')
	1822	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1823	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1824	13(' ',8(F8.2,',')/) )
	1825	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1826	'all gridpoints along ',A,'-direction (default).' )
	1827	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1828	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1829	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1830	#if defined( __dvrp_graphics )
	1831	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1832	' Output every ',F7.1,' s'/ &
	1833	' Output mode: ',A/ &
	1834	' Host / User: ',A,' / ',A/ &
	1835	' Directory: ',A// &
	1836	' The sequence contains:')
[337]	1837	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1838	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1839	362 FORMAT (/' Slicer plane ',A/ &
[336]	1840	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1841	363 FORMAT (/' Particles'/ &
[336]	1842	' particle size: ',F7.2,' m')
	1843	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1844	F6.2,',',F6.2,']')
[337]	1845	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1846	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1847	')'/ &
	1848	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1849	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1850	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1851	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1852	#endif
	1853	#if defined( __spectra )
	1854	370 FORMAT (' Spectra:')
	1855	371 FORMAT (' Output every ',F7.1,' s'/)
	1856	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1857	' Directions: ', 10(A5,',')/ &
[189]	1858	' height levels k = ', 20(I3,',')/ &
	1859	' ', 20(I3,',')/ &
	1860	' ', 20(I3,',')/ &
	1861	' ', 20(I3,',')/ &
	1862	' ', 19(I3,','),I3,'.'/ &
[1]	1863	' height levels selected for standard plot:'/ &
[189]	1864	' k = ', 20(I3,',')/ &
	1865	' ', 20(I3,',')/ &
	1866	' ', 20(I3,',')/ &
	1867	' ', 20(I3,',')/ &
	1868	' ', 19(I3,','),I3,'.'/ &
[1]	1869	' Time averaged over ', F7.1, ' s,' / &
	1870	' Profiles for the time averaging are taken every ', &
	1871	F6.1,' s')
	1872	#endif
	1873	400 FORMAT (//' Physical quantities:'/ &
	1874	' -------------------'/)
	1875	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1876	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1877	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1878	' f* = ',F9.6,' 1/s')
	1879	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1880	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1881	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1882	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1883	' ------------------------'/)
[57]	1884	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1885	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1886	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1887	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1888	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1889	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1890	' Height: ',A,' m'/ &
	1891	' Temperature: ',A,' K'/ &
	1892	' Gradient: ',A,' K/100m'/ &
	1893	' Gridpoint: ',A)
	1894	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1895	' Height: ',A,' m'/ &
	1896	' Humidity: ',A,' kg/kg'/ &
	1897	' Gradient: ',A,' (kg/kg)/100m'/ &
	1898	' Gridpoint: ',A)
	1899	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1900	' Height: ',A,' m'/ &
	1901	' Scalar concentration: ',A,' kg/m**3'/ &
	1902	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1903	' Gridpoint: ',A)
	1904	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1905	' Height: ',A,' m'/ &
	1906	' ug: ',A,' m/s'/ &
	1907	' Gradient: ',A,' 1/100s'/ &
	1908	' Gridpoint: ',A)
	1909	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1910	' Height: ',A,' m'/ &
[97]	1911	' vg: ',A,' m/s'/ &
[1]	1912	' Gradient: ',A,' 1/100s'/ &
	1913	' Gridpoint: ',A)
[97]	1914	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1915	' Height: ',A,' m'/ &
	1916	' Salinity: ',A,' psu'/ &
	1917	' Gradient: ',A,' psu/100m'/ &
	1918	' Gridpoint: ',A)
[411]	1919	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1920	' Height: ',A,' m'/ &
	1921	' w_subs: ',A,' m/s'/ &
	1922	' Gradient: ',A,' (m/s)/100m'/ &
	1923	' Gridpoint: ',A)
[1]	1924	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1925	' ---------------------------'/)
	1926	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1927	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1928	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1929	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1930	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1931	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1932	470 FORMAT (//' Actions during the simulation:'/ &
	1933	' -----------------------------'/)
[94]	1934	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1935	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1936	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1937	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1938	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1939	' to i/j =',I4)
	1940	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1941	1X,F5.3, ' m2/s2')
	1942	474 FORMAT (' Random number generator used : ',A/)
	1943	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1944	'respectively, if'/ &
	1945	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1946	' 3D-simulation'/)
	1947	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1948	'respectively, if the'/ &
	1949	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1950	' the 3D-simulation'/)
	1951	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1952	'respectively, if the'/ &
	1953	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1954	' the 3D-simulation'/)
	1955	480 FORMAT (' Particles:'/ &
	1956	' ---------'// &
	1957	' Particle advection is active (switched on at t = ', F7.1, &
	1958	' s)'/ &
	1959	' Start of new particle generations every ',F6.1,' s'/ &
	1960	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1961	' bottom: ', A, ' top: ', A/&
	1962	' Maximum particle age: ',F9.1,' s'/ &
[117]	1963	' Advection stopped at t = ',F9.1,' s'/ &
	1964	' Particles are sorted every ',F9.1,' s'/)
[1]	1965	481 FORMAT (' Particles have random start positions'/)
[336]	1966	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1967	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1968	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1969	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1970	' Maximum age of the end of the tail: ',F8.2,' s')
	1971	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1972	486 FORMAT (' Particle statistics are written on file'/)
	1973	487 FORMAT (' Number of particle groups: ',I2/)
	1974	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1975	' minimum timestep for advection: ', F7.5/)
	1976	489 FORMAT (' Number of particles simultaneously released at each ', &
	1977	'point: ', I5/)
	1978	490 FORMAT (' Particle group ',I2,':'/ &
	1979	' Particle radius: ',E10.3, 'm')
	1980	491 FORMAT (' Particle inertia is activated'/ &
	1981	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1982	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1983	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1984	' y:',F8.1,' - ',F8.1,' m'/&
	1985	' z:',F8.1,' - ',F8.1,' m'/&
	1986	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1987	' m dz = ',F8.1,' m'/)
	1988	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1989	F8.2,' s'/)
	1990	495 FORMAT (' Number of particles in total domain: ',I10/)
	1991	500 FORMAT (//' 1D-Model parameters:'/ &
	1992	' -------------------'// &
	1993	' Simulation time: ',F8.1,' s'/ &
	1994	' Run-controll output every: ',F8.1,' s'/ &
	1995	' Vertical profile output every: ',F8.1,' s'/ &
	1996	' Mixing length calculation: ',A/ &
	1997	' Dissipation calculation: ',A/)
	1998	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1999	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	2000	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	2001
	2002
	2003	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 759

Download in other formats: