Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 758

Last change on this file since 758 was 708, checked in by raasch, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.1 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[708]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 708 2011-03-29 12:34:54Z heinze $
	11	!
[708]	12	! 707 2011-03-29 11:39:40Z raasch
	13	! bc_lr/ns replaced by bc_lr/ns_cyc
	14	!
[668]	15	! 667 2010-12-23 12:06:00Z suehring/gryschka
	16	! Output of advection scheme.
	17	! Modified output of Prandtl-layer height.
	18	!
[581]	19	! 580 2010-10-05 13:59:11Z heinze
	20	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	21	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	22	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	23	!
[494]	24	! 493 2010-03-01 08:30:24Z raasch
	25	! NetCDF data output format extendend for NetCDF4/HDF5
	26	!
[482]	27	! 449 2010-02-02 11:23:59Z raasch
	28	! +large scale vertical motion (subsidence/ascent)
	29	! Bugfix: index problem concerning gradient_level indices removed
	30	!
[449]	31	! 410 2009-12-04 17:05:40Z letzel
	32	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	33	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	34	!
[392]	35	! 346 2009-07-06 10:13:41Z raasch
[328]	36	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	37	! Coupling with independent precursor runs.
[254]	38	! Output of messages replaced by message handling routine.
[336]	39	! Output of several additional dvr parameters
[240]	40	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	41	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	42	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	43	! topography_grid_convention moved from user_header
[292]	44	! small bugfix concerning 3d 64bit netcdf output format
[1]	45	!
[226]	46	! 206 2008-10-13 14:59:11Z raasch
	47	! Bugfix: error in zu index in case of section_xy = -1
	48	!
[200]	49	! 198 2008-09-17 08:55:28Z raasch
	50	! Format adjustments allowing output of larger revision numbers
	51	!
[198]	52	! 197 2008-09-16 15:29:03Z raasch
	53	! allow 100 spectra levels instead of 10 for consistency with
	54	! define_netcdf_header,
	55	! bugfix in the output of the characteristic levels of potential temperature,
	56	! geostrophic wind, scalar concentration, humidity and leaf area density,
	57	! output of turbulence recycling informations
	58	!
[139]	59	! 138 2007-11-28 10:03:58Z letzel
	60	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	61	! Allow two instead of one digit to specify isosurface and slicer variables.
	62	! Output of sorting frequency of particles
	63	!
[110]	64	! 108 2007-08-24 15:10:38Z letzel
	65	! Output of informations for coupled model runs (boundary conditions etc.)
	66	! + output of momentumfluxes at the top boundary
	67	! Rayleigh damping for ocean, e_init
	68	!
[98]	69	! 97 2007-06-21 08:23:15Z raasch
	70	! Adjustments for the ocean version.
	71	! use_pt_reference renamed use_reference
	72	!
[90]	73	! 87 2007-05-22 15:46:47Z raasch
	74	! Bugfix: output of use_upstream_for_tke
	75	!
[83]	76	! 82 2007-04-16 15:40:52Z raasch
	77	! Preprocessor strings for different linux clusters changed to "lc",
	78	! routine local_flush is used for buffer flushing
	79	!
[77]	80	! 76 2007-03-29 00:58:32Z raasch
	81	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	82	! output of the loop optimization method, moisture renamed humidity,
	83	! output of subversion revision number
	84	!
[39]	85	! 19 2007-02-23 04:53:48Z raasch
	86	! Output of scalar flux applied at top boundary
	87	!
[3]	88	! RCS Log replace by Id keyword, revision history cleaned up
	89	!
[1]	90	! Revision 1.63 2006/08/22 13:53:13 raasch
	91	! Output of dz_max
	92	!
	93	! Revision 1.1 1997/08/11 06:17:20 raasch
	94	! Initial revision
	95	!
	96	!
	97	! Description:
	98	! ------------
	99	! Writing a header with all important informations about the actual run.
	100	! This subroutine is called three times, two times at the beginning
	101	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	102	! end of the run, then writing additional information about CPU-usage on file
	103	! header.
[411]	104	!-----------------------------------------------------------------------------!
[1]	105
	106	USE arrays_3d
	107	USE control_parameters
	108	USE cloud_parameters
	109	USE cpulog
	110	USE dvrp_variables
	111	USE grid_variables
	112	USE indices
	113	USE model_1d
	114	USE particle_attributes
	115	USE pegrid
[411]	116	USE subsidence_mod
[1]	117	USE spectrum
	118
	119	IMPLICIT NONE
	120
	121	CHARACTER (LEN=1) :: prec
	122	CHARACTER (LEN=2) :: do2d_mode
	123	CHARACTER (LEN=5) :: section_chr
	124	CHARACTER (LEN=9) :: time_to_string
	125	CHARACTER (LEN=10) :: coor_chr, host_chr
	126	CHARACTER (LEN=16) :: begin_chr
[200]	127	CHARACTER (LEN=23) :: ver_rev
[1]	128	CHARACTER (LEN=40) :: output_format
[167]	129	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	130	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	131	domask_chr, run_classification
[167]	132	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	133	temperatures, ugcomponent, vgcomponent
[1]	134	CHARACTER (LEN=85) :: roben, runten
	135
[410]	136	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	137
	138	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	139	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	140	REAL :: cpuseconds_per_simulated_second
	141
	142	!
	143	!-- Open the output file. At the end of the simulation, output is directed
	144	!-- to unit 19.
	145	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	146	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	147	io = 15 ! header output on file RUN_CONTROL
	148	ELSE
	149	io = 19 ! header output on file HEADER
	150	ENDIF
	151	CALL check_open( io )
	152
	153	!
	154	!-- At the end of the run, output file (HEADER) will be rewritten with
	155	!-- new informations
	156	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	157
	158	!
	159	!-- Determine kind of model run
	160	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	161	run_classification = '3D - restart run'
[328]	162	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	163	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	164	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	165	run_classification = '3D - run without 1D - prerun'
[197]	166	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	167	run_classification = '3D - run with 1D - prerun'
[197]	168	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	169	run_classification = '3D - run initialized by user'
[1]	170	ELSE
[254]	171	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	172	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	173	ENDIF
[97]	174	IF ( ocean ) THEN
	175	run_classification = 'ocean - ' // run_classification
	176	ELSE
	177	run_classification = 'atmosphere - ' // run_classification
	178	ENDIF
[1]	179
	180	!
	181	!-- Run-identification, date, time, host
	182	host_chr = host(1:10)
[75]	183	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	184	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	185	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	186	#if defined( __mpi2 )
	187	mpi_type = 2
	188	#else
	189	mpi_type = 1
	190	#endif
	191	WRITE ( io, 101 ) mpi_type, coupling_mode
	192	ENDIF
[102]	193	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	194	ADJUSTR( host_chr )
[1]	195	#if defined( __parallel )
	196	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	197	char1 = 'calculated'
	198	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	199	host(1:2) == 'lc' ) .AND. &
	200	npex == -1 .AND. pdims(2) == 1 ) THEN
	201	char1 = 'forced'
	202	ELSE
	203	char1 = 'predefined'
	204	ENDIF
	205	IF ( threads_per_task == 1 ) THEN
[102]	206	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	207	ELSE
[102]	208	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	209	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	210	ENDIF
	211	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	212	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	213	npex == -1 .AND. pdims(2) == 1 ) &
	214	THEN
[102]	215	WRITE ( io, 106 )
[1]	216	ELSEIF ( pdims(2) == 1 ) THEN
[102]	217	WRITE ( io, 107 ) 'x'
[1]	218	ELSEIF ( pdims(1) == 1 ) THEN
[102]	219	WRITE ( io, 107 ) 'y'
[1]	220	ENDIF
[102]	221	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	222	#endif
	223	WRITE ( io, 99 )
	224
	225	!
	226	!-- Numerical schemes
	227	WRITE ( io, 110 )
	228	IF ( psolver(1:7) == 'poisfft' ) THEN
	229	WRITE ( io, 111 ) TRIM( fft_method )
	230	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	231	ELSEIF ( psolver == 'sor' ) THEN
	232	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	233	ELSEIF ( psolver == 'multigrid' ) THEN
	234	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	235	IF ( mg_cycles == -1 ) THEN
	236	WRITE ( io, 140 ) residual_limit
	237	ELSE
	238	WRITE ( io, 141 ) mg_cycles
	239	ENDIF
	240	IF ( mg_switch_to_pe0_level == 0 ) THEN
	241	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	242	nzt_mg(1)
[197]	243	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	244	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	245	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	246	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	247	nzt_mg(mg_switch_to_pe0_level), &
	248	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	249	nzt_mg(1)
	250	ENDIF
	251	ENDIF
	252	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	253	THEN
	254	WRITE ( io, 142 )
	255	ENDIF
	256
	257	IF ( momentum_advec == 'pw-scheme' ) THEN
	258	WRITE ( io, 113 )
[667]	259	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	260	WRITE ( io, 503 )
	261	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	262	WRITE ( io, 114 )
	263	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	264	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	265	overshoot_limit_w /= 0.0 ) THEN
	266	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	267	overshoot_limit_w
	268	ENDIF
	269	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	270	ups_limit_w /= 0.0 ) &
	271	THEN
	272	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	273	ENDIF
	274	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	275	ENDIF
	276	IF ( scalar_advec == 'pw-scheme' ) THEN
	277	WRITE ( io, 116 )
[667]	278	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	279	WRITE ( io, 504 )
[1]	280	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	281	WRITE ( io, 117 )
	282	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	283	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	284	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	285	ENDIF
	286	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	287	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	288	ENDIF
	289	ELSE
	290	WRITE ( io, 118 )
	291	ENDIF
[63]	292
	293	WRITE ( io, 139 ) TRIM( loop_optimization )
	294
[1]	295	IF ( galilei_transformation ) THEN
	296	IF ( use_ug_for_galilei_tr ) THEN
	297	char1 = 'geostrophic wind'
	298	ELSE
	299	char1 = 'mean wind in model domain'
	300	ENDIF
	301	IF ( simulated_time_at_begin == simulated_time ) THEN
	302	char2 = 'at the start of the run'
	303	ELSE
	304	char2 = 'at the end of the run'
	305	ENDIF
	306	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	307	advected_distance_x/1000.0, advected_distance_y/1000.0
	308	ENDIF
	309	IF ( timestep_scheme == 'leapfrog' ) THEN
	310	WRITE ( io, 120 )
	311	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	312	WRITE ( io, 121 )
	313	ELSE
	314	WRITE ( io, 122 ) timestep_scheme
	315	ENDIF
[87]	316	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	317	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	318	IF ( .NOT. ocean ) THEN
	319	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	320	rayleigh_damping_factor
	321	ELSE
	322	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	323	rayleigh_damping_factor
	324	ENDIF
[1]	325	ENDIF
[75]	326	IF ( humidity ) THEN
[1]	327	IF ( .NOT. cloud_physics ) THEN
	328	WRITE ( io, 129 )
	329	ELSE
	330	WRITE ( io, 130 )
	331	WRITE ( io, 131 )
	332	IF ( radiation ) WRITE ( io, 132 )
	333	IF ( precipitation ) WRITE ( io, 133 )
	334	ENDIF
	335	ENDIF
	336	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	337	IF ( conserve_volume_flow ) THEN
[241]	338	WRITE ( io, 150 ) conserve_volume_flow_mode
	339	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	340	WRITE ( io, 151 ) u_bulk, v_bulk
	341	ENDIF
[240]	342	ELSEIF ( dp_external ) THEN
	343	IF ( dp_smooth ) THEN
[241]	344	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	345	ELSE
[241]	346	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	347	ENDIF
	348	ENDIF
[411]	349	IF ( large_scale_subsidence ) THEN
	350	WRITE ( io, 153 )
	351	WRITE ( io, 154 )
	352	ENDIF
[1]	353	WRITE ( io, 99 )
	354
	355	!
	356	!-- Runtime and timestep informations
	357	WRITE ( io, 200 )
	358	IF ( .NOT. dt_fixed ) THEN
	359	WRITE ( io, 201 ) dt_max, cfl_factor
	360	ELSE
	361	WRITE ( io, 202 ) dt
	362	ENDIF
	363	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	364
	365	IF ( time_restart /= 9999999.9 .AND. &
	366	simulated_time_at_begin == simulated_time ) THEN
	367	IF ( dt_restart == 9999999.9 ) THEN
	368	WRITE ( io, 204 ) ' Restart at: ',time_restart
	369	ELSE
	370	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	371	ENDIF
	372	ENDIF
	373
	374	IF ( simulated_time_at_begin /= simulated_time ) THEN
	375	i = MAX ( log_point_s(10)%counts, 1 )
	376	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	377	cpuseconds_per_simulated_second = 0.0
	378	ELSE
	379	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	380	( simulated_time - &
	381	simulated_time_at_begin )
	382	ENDIF
	383	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	384	log_point_s(10)%sum / REAL( i ), &
	385	cpuseconds_per_simulated_second
	386	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	387	IF ( dt_restart == 9999999.9 ) THEN
	388	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	389	ELSE
	390	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	391	ENDIF
	392	ENDIF
	393	ENDIF
	394
	395	!
[291]	396	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	397	!-- and ocean are used. In this case, coupling_start_time defines the time
	398	!-- when the coupling is switched on.
	399	IF ( coupling_start_time /= 0.0 ) THEN
	400	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	401	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	402	ELSE
	403	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	404	'precursor runs'
	405	ENDIF
	406	WRITE ( io, 207 ) char1, coupling_start_time
	407	ENDIF
	408
	409	!
[1]	410	!-- Computational grid
[94]	411	IF ( .NOT. ocean ) THEN
	412	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	413	IF ( dz_stretch_level_index < nzt+1 ) THEN
	414	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	415	dz_stretch_factor, dz_max
	416	ENDIF
	417	ELSE
	418	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	419	IF ( dz_stretch_level_index > 0 ) THEN
	420	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	421	dz_stretch_factor, dz_max
	422	ENDIF
[1]	423	ENDIF
	424	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	425	MIN( nnz+2, nzt+2 )
[76]	426	IF ( numprocs > 1 ) THEN
	427	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	428	WRITE ( io, 255 )
	429	ELSE
	430	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	431	ENDIF
[1]	432	ENDIF
	433	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	434
	435	!
	436	!-- Topography
	437	WRITE ( io, 270 ) topography
	438	SELECT CASE ( TRIM( topography ) )
	439
	440	CASE ( 'flat' )
	441	! no actions necessary
	442
	443	CASE ( 'single_building' )
	444	blx = INT( building_length_x / dx )
	445	bly = INT( building_length_y / dy )
	446	bh = INT( building_height / dz )
	447
	448	IF ( building_wall_left == 9999999.9 ) THEN
	449	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	450	ENDIF
	451	bxl = INT ( building_wall_left / dx + 0.5 )
	452	bxr = bxl + blx
	453
	454	IF ( building_wall_south == 9999999.9 ) THEN
	455	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	456	ENDIF
	457	bys = INT ( building_wall_south / dy + 0.5 )
	458	byn = bys + bly
	459
	460	WRITE ( io, 271 ) building_length_x, building_length_y, &
	461	building_height, bxl, bxr, bys, byn
	462
[240]	463	CASE ( 'single_street_canyon' )
	464	ch = NINT( canyon_height / dz )
	465	IF ( canyon_width_x /= 9999999.9 ) THEN
	466	!
	467	!-- Street canyon in y direction
	468	cwx = NINT( canyon_width_x / dx )
	469	IF ( canyon_wall_left == 9999999.9 ) THEN
	470	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	471	ENDIF
	472	cxl = NINT( canyon_wall_left / dx )
	473	cxr = cxl + cwx
	474	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	475
	476	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	477	!
	478	!-- Street canyon in x direction
	479	cwy = NINT( canyon_width_y / dy )
	480	IF ( canyon_wall_south == 9999999.9 ) THEN
	481	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	482	ENDIF
	483	cys = NINT( canyon_wall_south / dy )
	484	cyn = cys + cwy
	485	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	486	ENDIF
	487
[1]	488	END SELECT
	489
[256]	490	IF ( TRIM( topography ) /= 'flat' ) THEN
	491	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	492	IF ( TRIM( topography ) == 'single_building' .OR. &
	493	TRIM( topography ) == 'single_street_canyon' ) THEN
	494	WRITE ( io, 278 )
	495	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	496	WRITE ( io, 279 )
	497	ENDIF
	498	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	499	WRITE ( io, 278 )
	500	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	501	WRITE ( io, 279 )
	502	ENDIF
	503	ENDIF
	504
[138]	505	IF ( plant_canopy ) THEN
	506
	507	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	508	IF ( passive_scalar ) THEN
	509	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	510	leaf_surface_concentration
	511	ENDIF
[138]	512
[1]	513	!
[153]	514	!-- Heat flux at the top of vegetation
	515	WRITE ( io, 282 ) cthf
	516
	517	!
[138]	518	!-- Leaf area density profile
	519	!-- Building output strings, starting with surface value
	520	WRITE ( learde, '(F6.2)' ) lad_surface
	521	gradients = '------'
	522	slices = ' 0'
	523	coordinates = ' 0.0'
	524	i = 1
	525	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	526
	527	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	528	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	529
	530	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	531	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	532
	533	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	534	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	535
	536	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	537	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	538
	539	i = i + 1
	540	ENDDO
	541
[153]	542	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	543	TRIM( gradients ), TRIM( slices )
	544
	545	ENDIF
	546
	547	!
[1]	548	!-- Boundary conditions
	549	IF ( ibc_p_b == 0 ) THEN
	550	runten = 'p(0) = 0 \|'
	551	ELSEIF ( ibc_p_b == 1 ) THEN
	552	runten = 'p(0) = p(1) \|'
	553	ELSE
	554	runten = 'p(0) = p(1) +R\|'
	555	ENDIF
	556	IF ( ibc_p_t == 0 ) THEN
	557	roben = 'p(nzt+1) = 0 \|'
	558	ELSE
	559	roben = 'p(nzt+1) = p(nzt) \|'
	560	ENDIF
	561
	562	IF ( ibc_uv_b == 0 ) THEN
	563	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	564	ELSE
	565	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	566	ENDIF
[132]	567	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	568	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	569	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	570	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	571	ELSE
	572	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	573	ENDIF
	574
	575	IF ( ibc_pt_b == 0 ) THEN
	576	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	577	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	578	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	579	ELSEIF ( ibc_pt_b == 2 ) THEN
	580	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	581	ENDIF
	582	IF ( ibc_pt_t == 0 ) THEN
[19]	583	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	584	ELSEIF( ibc_pt_t == 1 ) THEN
	585	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	586	ELSEIF( ibc_pt_t == 2 ) THEN
	587	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	588
[1]	589	ENDIF
	590
	591	WRITE ( io, 300 ) runten, roben
	592
	593	IF ( .NOT. constant_diffusion ) THEN
	594	IF ( ibc_e_b == 1 ) THEN
	595	runten = 'e(0) = e(1)'
	596	ELSE
	597	runten = 'e(0) = e(1) = (u/0.1)*2'
	598	ENDIF
	599	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	600
[97]	601	WRITE ( io, 301 ) 'e', runten, roben
[1]	602
	603	ENDIF
	604
[97]	605	IF ( ocean ) THEN
	606	runten = 'sa(0) = sa(1)'
	607	IF ( ibc_sa_t == 0 ) THEN
	608	roben = 'sa(nzt+1) = sa_surface'
[1]	609	ELSE
[97]	610	roben = 'sa(nzt+1) = sa(nzt)'
[1]	611	ENDIF
[97]	612	WRITE ( io, 301 ) 'sa', runten, roben
	613	ENDIF
[1]	614
[97]	615	IF ( humidity ) THEN
	616	IF ( ibc_q_b == 0 ) THEN
	617	runten = 'q(0) = q_surface'
	618	ELSE
	619	runten = 'q(0) = q(1)'
	620	ENDIF
	621	IF ( ibc_q_t == 0 ) THEN
	622	roben = 'q(nzt) = q_top'
	623	ELSE
	624	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	625	ENDIF
	626	WRITE ( io, 301 ) 'q', runten, roben
	627	ENDIF
[1]	628
[97]	629	IF ( passive_scalar ) THEN
	630	IF ( ibc_q_b == 0 ) THEN
	631	runten = 's(0) = s_surface'
	632	ELSE
	633	runten = 's(0) = s(1)'
	634	ENDIF
	635	IF ( ibc_q_t == 0 ) THEN
	636	roben = 's(nzt) = s_top'
	637	ELSE
	638	roben = 's(nzt) = s(nzt-1) + ds/dz'
	639	ENDIF
	640	WRITE ( io, 301 ) 's', runten, roben
[1]	641	ENDIF
	642
	643	IF ( use_surface_fluxes ) THEN
	644	WRITE ( io, 303 )
	645	IF ( constant_heatflux ) THEN
	646	WRITE ( io, 306 ) surface_heatflux
	647	IF ( random_heatflux ) WRITE ( io, 307 )
	648	ENDIF
[75]	649	IF ( humidity .AND. constant_waterflux ) THEN
[1]	650	WRITE ( io, 311 ) surface_waterflux
	651	ENDIF
	652	IF ( passive_scalar .AND. constant_waterflux ) THEN
	653	WRITE ( io, 313 ) surface_waterflux
	654	ENDIF
	655	ENDIF
	656
[19]	657	IF ( use_top_fluxes ) THEN
	658	WRITE ( io, 304 )
[102]	659	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	660	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	661	IF ( constant_top_heatflux ) THEN
	662	WRITE ( io, 306 ) top_heatflux
	663	ENDIF
	664	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	665	WRITE ( io, 316 )
[19]	666	ENDIF
[97]	667	IF ( ocean .AND. constant_top_salinityflux ) THEN
	668	WRITE ( io, 309 ) top_salinityflux
	669	ENDIF
[75]	670	IF ( humidity .OR. passive_scalar ) THEN
[19]	671	WRITE ( io, 315 )
	672	ENDIF
	673	ENDIF
	674
[1]	675	IF ( prandtl_layer ) THEN
[667]	676	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	677	rif_min, rif_max
[1]	678	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	679	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	680	WRITE ( io, 312 )
	681	ENDIF
	682	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	683	WRITE ( io, 314 )
	684	ENDIF
	685	ELSE
	686	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	687	WRITE ( io, 310 ) rif_min, rif_max
	688	ENDIF
	689	ENDIF
	690
	691	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	692	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	693	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	694	IF ( turbulent_inflow ) THEN
	695	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	696	inflow_damping_height, inflow_damping_width
	697	ENDIF
[1]	698	ENDIF
	699
	700	!
	701	!-- Listing of 1D-profiles
[151]	702	WRITE ( io, 325 ) dt_dopr_listing
[1]	703	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	704	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	705	ENDIF
	706
	707	!
	708	!-- DATA output
	709	WRITE ( io, 330 )
	710	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	711	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	712	ENDIF
	713
	714	!
	715	!-- 1D-profiles
[346]	716	dopr_chr = 'Profile:'
[1]	717	IF ( dopr_n /= 0 ) THEN
	718	WRITE ( io, 331 )
	719
	720	output_format = ''
	721	IF ( netcdf_output ) THEN
[493]	722	IF ( netcdf_data_format == 1 ) THEN
	723	output_format = 'NetCDF classic'
[1]	724	ELSE
[493]	725	output_format = 'NetCDF 64bit offset'
[1]	726	ENDIF
	727	ENDIF
	728	IF ( profil_output ) THEN
	729	IF ( netcdf_output ) THEN
	730	output_format = TRIM( output_format ) // ' and profil'
	731	ELSE
	732	output_format = 'profil'
	733	ENDIF
	734	ENDIF
[292]	735	WRITE ( io, 344 ) output_format
[1]	736
	737	DO i = 1, dopr_n
	738	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	739	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	740	WRITE ( io, 332 ) dopr_chr
	741	dopr_chr = ' :'
	742	ENDIF
	743	ENDDO
	744
	745	IF ( dopr_chr /= '' ) THEN
	746	WRITE ( io, 332 ) dopr_chr
	747	ENDIF
	748	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	749	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	750	ENDIF
	751
	752	!
	753	!-- 2D-arrays
	754	DO av = 0, 1
	755
	756	i = 1
	757	do2d_xy = ''
	758	do2d_xz = ''
	759	do2d_yz = ''
	760	DO WHILE ( do2d(av,i) /= ' ' )
	761
	762	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	763	do2d_mode = do2d(av,i)(l-1:l)
	764
	765	SELECT CASE ( do2d_mode )
	766	CASE ( 'xy' )
	767	ll = LEN_TRIM( do2d_xy )
	768	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	769	CASE ( 'xz' )
	770	ll = LEN_TRIM( do2d_xz )
	771	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	772	CASE ( 'yz' )
	773	ll = LEN_TRIM( do2d_yz )
	774	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	775	END SELECT
	776
	777	i = i + 1
	778
	779	ENDDO
	780
	781	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	782	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	783	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	784	( netcdf_output .OR. iso2d_output ) ) THEN
	785
	786	IF ( av == 0 ) THEN
	787	WRITE ( io, 334 ) ''
	788	ELSE
	789	WRITE ( io, 334 ) '(time-averaged)'
	790	ENDIF
	791
	792	IF ( do2d_at_begin ) THEN
	793	begin_chr = 'and at the start'
	794	ELSE
	795	begin_chr = ''
	796	ENDIF
	797
	798	output_format = ''
	799	IF ( netcdf_output ) THEN
[493]	800	IF ( netcdf_data_format == 1 ) THEN
	801	output_format = 'NetCDF classic'
	802	ELSEIF ( netcdf_data_format == 2 ) THEN
	803	output_format = 'NetCDF 64bit offset'
	804	ELSEIF ( netcdf_data_format == 3 ) THEN
	805	output_format = 'NetCDF4/HDF5'
	806	ELSEIF ( netcdf_data_format == 4 ) THEN
	807	output_format = 'NetCDF4/HDF5 clasic'
[1]	808	ENDIF
	809	ENDIF
	810	IF ( iso2d_output ) THEN
	811	IF ( netcdf_output ) THEN
	812	output_format = TRIM( output_format ) // ' and iso2d'
	813	ELSE
	814	output_format = 'iso2d'
	815	ENDIF
	816	ENDIF
[292]	817	WRITE ( io, 344 ) output_format
[1]	818
	819	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	820	i = 1
	821	slices = '/'
	822	coordinates = '/'
	823	!
	824	!-- Building strings with index and coordinate informations of the
	825	!-- slices
	826	DO WHILE ( section(i,1) /= -9999 )
	827
	828	WRITE (section_chr,'(I5)') section(i,1)
	829	section_chr = ADJUSTL( section_chr )
	830	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	831
[206]	832	IF ( section(i,1) == -1 ) THEN
	833	WRITE (coor_chr,'(F10.1)') -1.0
	834	ELSE
	835	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	836	ENDIF
[1]	837	coor_chr = ADJUSTL( coor_chr )
	838	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	839
	840	i = i + 1
	841	ENDDO
	842	IF ( av == 0 ) THEN
	843	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	844	TRIM( begin_chr ), 'k', TRIM( slices ), &
	845	TRIM( coordinates )
	846	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	847	WRITE ( io, 339 ) skip_time_do2d_xy
	848	ENDIF
	849	ELSE
	850	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	851	TRIM( begin_chr ), averaging_interval, &
	852	dt_averaging_input, 'k', TRIM( slices ), &
	853	TRIM( coordinates )
	854	IF ( skip_time_data_output_av /= 0.0 ) THEN
	855	WRITE ( io, 339 ) skip_time_data_output_av
	856	ENDIF
	857	ENDIF
	858
	859	ENDIF
	860
	861	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	862	i = 1
	863	slices = '/'
	864	coordinates = '/'
	865	!
	866	!-- Building strings with index and coordinate informations of the
	867	!-- slices
	868	DO WHILE ( section(i,2) /= -9999 )
	869
	870	WRITE (section_chr,'(I5)') section(i,2)
	871	section_chr = ADJUSTL( section_chr )
	872	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	873
	874	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	875	coor_chr = ADJUSTL( coor_chr )
	876	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	877
	878	i = i + 1
	879	ENDDO
	880	IF ( av == 0 ) THEN
	881	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	882	TRIM( begin_chr ), 'j', TRIM( slices ), &
	883	TRIM( coordinates )
	884	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	885	WRITE ( io, 339 ) skip_time_do2d_xz
	886	ENDIF
	887	ELSE
	888	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	889	TRIM( begin_chr ), averaging_interval, &
	890	dt_averaging_input, 'j', TRIM( slices ), &
	891	TRIM( coordinates )
	892	IF ( skip_time_data_output_av /= 0.0 ) THEN
	893	WRITE ( io, 339 ) skip_time_data_output_av
	894	ENDIF
	895	ENDIF
	896	ENDIF
	897
	898	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	899	i = 1
	900	slices = '/'
	901	coordinates = '/'
	902	!
	903	!-- Building strings with index and coordinate informations of the
	904	!-- slices
	905	DO WHILE ( section(i,3) /= -9999 )
	906
	907	WRITE (section_chr,'(I5)') section(i,3)
	908	section_chr = ADJUSTL( section_chr )
	909	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	910
	911	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	912	coor_chr = ADJUSTL( coor_chr )
	913	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	914
	915	i = i + 1
	916	ENDDO
	917	IF ( av == 0 ) THEN
	918	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	919	TRIM( begin_chr ), 'i', TRIM( slices ), &
	920	TRIM( coordinates )
	921	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	922	WRITE ( io, 339 ) skip_time_do2d_yz
	923	ENDIF
	924	ELSE
	925	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	926	TRIM( begin_chr ), averaging_interval, &
	927	dt_averaging_input, 'i', TRIM( slices ), &
	928	TRIM( coordinates )
	929	IF ( skip_time_data_output_av /= 0.0 ) THEN
	930	WRITE ( io, 339 ) skip_time_data_output_av
	931	ENDIF
	932	ENDIF
	933	ENDIF
	934
	935	ENDIF
	936
	937	ENDDO
	938
	939	!
	940	!-- 3d-arrays
	941	DO av = 0, 1
	942
	943	i = 1
	944	do3d_chr = ''
	945	DO WHILE ( do3d(av,i) /= ' ' )
	946
	947	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	948	i = i + 1
	949
	950	ENDDO
	951
	952	IF ( do3d_chr /= '' ) THEN
	953	IF ( av == 0 ) THEN
	954	WRITE ( io, 336 ) ''
	955	ELSE
	956	WRITE ( io, 336 ) '(time-averaged)'
	957	ENDIF
	958
	959	output_format = ''
	960	IF ( netcdf_output ) THEN
[493]	961	IF ( netcdf_data_format == 1 ) THEN
	962	output_format = 'NetCDF classic'
	963	ELSEIF ( netcdf_data_format == 2 ) THEN
	964	output_format = 'NetCDF 64bit offset'
	965	ELSEIF ( netcdf_data_format == 3 ) THEN
	966	output_format = 'NetCDF4/HDF5'
	967	ELSEIF ( netcdf_data_format == 4 ) THEN
	968	output_format = 'NetCDF4/HDF5 clasic'
[1]	969	ENDIF
	970	ENDIF
	971	IF ( avs_output ) THEN
	972	IF ( netcdf_output ) THEN
	973	output_format = TRIM( output_format ) // ' and avs'
	974	ELSE
	975	output_format = 'avs'
	976	ENDIF
	977	ENDIF
[292]	978	WRITE ( io, 344 ) output_format
[1]	979
	980	IF ( do3d_at_begin ) THEN
	981	begin_chr = 'and at the start'
	982	ELSE
	983	begin_chr = ''
	984	ENDIF
	985	IF ( av == 0 ) THEN
	986	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	987	zu(nz_do3d), nz_do3d
	988	ELSE
	989	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	990	TRIM( begin_chr ), averaging_interval, &
	991	dt_averaging_input, zu(nz_do3d), nz_do3d
	992	ENDIF
	993
	994	IF ( do3d_compress ) THEN
	995	do3d_chr = ''
	996	i = 1
	997	DO WHILE ( do3d(av,i) /= ' ' )
	998
	999	SELECT CASE ( do3d(av,i) )
	1000	CASE ( 'u' )
	1001	j = 1
	1002	CASE ( 'v' )
	1003	j = 2
	1004	CASE ( 'w' )
	1005	j = 3
	1006	CASE ( 'p' )
	1007	j = 4
	1008	CASE ( 'pt' )
	1009	j = 5
	1010	END SELECT
	1011	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1012	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1013	':' // prec // ','
	1014	i = i + 1
	1015
	1016	ENDDO
	1017	WRITE ( io, 338 ) do3d_chr
	1018
	1019	ENDIF
	1020
	1021	IF ( av == 0 ) THEN
	1022	IF ( skip_time_do3d /= 0.0 ) THEN
	1023	WRITE ( io, 339 ) skip_time_do3d
	1024	ENDIF
	1025	ELSE
	1026	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1027	WRITE ( io, 339 ) skip_time_data_output_av
	1028	ENDIF
	1029	ENDIF
	1030
	1031	ENDIF
	1032
	1033	ENDDO
	1034
	1035	!
[410]	1036	!-- masked arrays
	1037	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1038	mask_scale_x, mask_scale_y, mask_scale_z
	1039	DO mid = 1, masks
	1040	DO av = 0, 1
	1041
	1042	i = 1
	1043	domask_chr = ''
	1044	DO WHILE ( domask(mid,av,i) /= ' ' )
	1045	domask_chr = TRIM( domask_chr ) // ' ' // &
	1046	TRIM( domask(mid,av,i) ) // ','
	1047	i = i + 1
	1048	ENDDO
	1049
	1050	IF ( domask_chr /= '' ) THEN
	1051	IF ( av == 0 ) THEN
	1052	WRITE ( io, 346 ) '', mid
	1053	ELSE
	1054	WRITE ( io, 346 ) ' (time-averaged)', mid
	1055	ENDIF
	1056
	1057	output_format = ''
	1058	IF ( netcdf_output ) THEN
[493]	1059	IF ( netcdf_data_format == 1 ) THEN
	1060	output_format = 'NetCDF classic'
	1061	ELSEIF ( netcdf_data_format == 2 ) THEN
	1062	output_format = 'NetCDF 64bit offset'
	1063	ELSEIF ( netcdf_data_format == 3 ) THEN
	1064	output_format = 'NetCDF4/HDF5'
	1065	ELSEIF ( netcdf_data_format == 4 ) THEN
	1066	output_format = 'NetCDF4/HDF5 clasic'
	1067	ENDIF
[410]	1068	ENDIF
	1069	WRITE ( io, 344 ) output_format
	1070
	1071	IF ( av == 0 ) THEN
	1072	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1073	ELSE
	1074	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1075	averaging_interval, dt_averaging_input
	1076	ENDIF
	1077
	1078	IF ( av == 0 ) THEN
	1079	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1080	WRITE ( io, 339 ) skip_time_domask(mid)
	1081	ENDIF
	1082	ELSE
	1083	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1084	WRITE ( io, 339 ) skip_time_data_output_av
	1085	ENDIF
	1086	ENDIF
	1087	!
	1088	!-- output locations
	1089	DO dim = 1, 3
	1090	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1091	count = 0
	1092	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1093	count = count + 1
	1094	ENDDO
	1095	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1096	mask(mid,dim,:count)
	1097	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1098	mask_loop(mid,dim,2) < 0.0 .AND. &
	1099	mask_loop(mid,dim,3) == 0.0 ) THEN
	1100	WRITE ( io, 350 ) dir(dim), dir(dim)
	1101	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1102	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1103	mask_loop(mid,dim,1:2)
	1104	ELSE
	1105	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1106	mask_loop(mid,dim,1:3)
	1107	ENDIF
	1108	ENDDO
	1109	ENDIF
	1110
	1111	ENDDO
	1112	ENDDO
	1113
	1114	!
[1]	1115	!-- Timeseries
	1116	IF ( dt_dots /= 9999999.9 ) THEN
	1117	WRITE ( io, 340 )
	1118
	1119	output_format = ''
	1120	IF ( netcdf_output ) THEN
[493]	1121	IF ( netcdf_data_format == 1 ) THEN
	1122	output_format = 'NetCDF classic'
[1]	1123	ELSE
[493]	1124	output_format = 'NetCDF 64bit offset'
[1]	1125	ENDIF
	1126	ENDIF
	1127	IF ( profil_output ) THEN
	1128	IF ( netcdf_output ) THEN
	1129	output_format = TRIM( output_format ) // ' and profil'
	1130	ELSE
	1131	output_format = 'profil'
	1132	ENDIF
	1133	ENDIF
[292]	1134	WRITE ( io, 344 ) output_format
[1]	1135	WRITE ( io, 341 ) dt_dots
	1136	ENDIF
	1137
	1138	#if defined( __dvrp_graphics )
	1139	!
	1140	!-- Dvrp-output
	1141	IF ( dt_dvrp /= 9999999.9 ) THEN
	1142	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1143	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1144	i = 1
	1145	l = 0
[336]	1146	m = 0
[1]	1147	DO WHILE ( mode_dvrp(i) /= ' ' )
	1148	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1149	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1150	l = l + 1
	1151	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1152	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1153	isosurface_color(:,l)
[1]	1154	ENDIF
	1155	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1156	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1157	m = m + 1
	1158	IF ( do2d(0,j) /= ' ' ) THEN
	1159	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1160	slicer_range_limits_dvrp(:,m)
	1161	ENDIF
[1]	1162	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1163	WRITE ( io, 363 ) dvrp_psize
	1164	IF ( particle_dvrpsize /= 'none' ) THEN
	1165	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1166	dvrpsize_interval
	1167	ENDIF
	1168	IF ( particle_color /= 'none' ) THEN
	1169	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1170	color_interval
	1171	ENDIF
[1]	1172	ENDIF
	1173	i = i + 1
	1174	ENDDO
[237]	1175
[336]	1176	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1177	superelevation_y, superelevation, clip_dvrp_l, &
	1178	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1179
	1180	IF ( TRIM( topography ) /= 'flat' ) THEN
	1181	WRITE ( io, 366 ) topography_color
	1182	IF ( cluster_size > 1 ) THEN
	1183	WRITE ( io, 367 ) cluster_size
	1184	ENDIF
[237]	1185	ENDIF
	1186
[1]	1187	ENDIF
	1188	#endif
	1189
	1190	#if defined( __spectra )
	1191	!
	1192	!-- Spectra output
	1193	IF ( dt_dosp /= 9999999.9 ) THEN
	1194	WRITE ( io, 370 )
	1195
	1196	output_format = ''
	1197	IF ( netcdf_output ) THEN
[493]	1198	IF ( netcdf_data_format == 1 ) THEN
	1199	output_format = 'NetCDF classic'
[1]	1200	ELSE
[493]	1201	output_format = 'NetCDF 64bit offset'
[1]	1202	ENDIF
	1203	ENDIF
	1204	IF ( profil_output ) THEN
	1205	IF ( netcdf_output ) THEN
	1206	output_format = TRIM( output_format ) // ' and profil'
	1207	ELSE
	1208	output_format = 'profil'
	1209	ENDIF
	1210	ENDIF
[292]	1211	WRITE ( io, 344 ) output_format
[1]	1212	WRITE ( io, 371 ) dt_dosp
	1213	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1214	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1215	( spectra_direction(i), i = 1,10 ), &
[189]	1216	( comp_spectra_level(i), i = 1,100 ), &
	1217	( plot_spectra_level(i), i = 1,100 ), &
[1]	1218	averaging_interval_sp, dt_averaging_input_pr
	1219	ENDIF
	1220	#endif
	1221
	1222	WRITE ( io, 99 )
	1223
	1224	!
	1225	!-- Physical quantities
	1226	WRITE ( io, 400 )
	1227
	1228	!
	1229	!-- Geostrophic parameters
	1230	WRITE ( io, 410 ) omega, phi, f, fs
	1231
	1232	!
	1233	!-- Other quantities
	1234	WRITE ( io, 411 ) g
[97]	1235	IF ( use_reference ) THEN
	1236	IF ( ocean ) THEN
	1237	WRITE ( io, 412 ) prho_reference
	1238	ELSE
	1239	WRITE ( io, 413 ) pt_reference
	1240	ENDIF
	1241	ENDIF
[1]	1242
	1243	!
	1244	!-- Cloud physics parameters
	1245	IF ( cloud_physics ) THEN
[57]	1246	WRITE ( io, 415 )
	1247	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1248	ENDIF
	1249
	1250	!-- Profile of the geostrophic wind (component ug)
	1251	!-- Building output strings
	1252	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1253	gradients = '------'
	1254	slices = ' 0'
	1255	coordinates = ' 0.0'
	1256	i = 1
	1257	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1258
[167]	1259	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1260	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1261
[167]	1262	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1263	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1264
[167]	1265	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1266	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1267
[167]	1268	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1269	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1270
[430]	1271	IF ( i == 10 ) THEN
	1272	EXIT
	1273	ELSE
	1274	i = i + 1
	1275	ENDIF
	1276
[1]	1277	ENDDO
	1278
	1279	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1280	TRIM( gradients ), TRIM( slices )
	1281
	1282	!-- Profile of the geostrophic wind (component vg)
	1283	!-- Building output strings
	1284	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1285	gradients = '------'
	1286	slices = ' 0'
	1287	coordinates = ' 0.0'
	1288	i = 1
	1289	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1290
[167]	1291	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1292	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1293
[167]	1294	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1295	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1296
[167]	1297	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1298	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1299
[167]	1300	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1301	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1302
[430]	1303	IF ( i == 10 ) THEN
	1304	EXIT
	1305	ELSE
	1306	i = i + 1
	1307	ENDIF
	1308
[1]	1309	ENDDO
	1310
	1311	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1312	TRIM( gradients ), TRIM( slices )
	1313
	1314	!
	1315	!-- Initial temperature profile
	1316	!-- Building output strings, starting with surface temperature
	1317	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1318	gradients = '------'
	1319	slices = ' 0'
	1320	coordinates = ' 0.0'
	1321	i = 1
	1322	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1323
[94]	1324	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1325	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1326
[94]	1327	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1328	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1329
[94]	1330	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1331	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1332
[94]	1333	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1334	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1335
[430]	1336	IF ( i == 10 ) THEN
	1337	EXIT
	1338	ELSE
	1339	i = i + 1
	1340	ENDIF
	1341
[1]	1342	ENDDO
	1343
	1344	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1345	TRIM( gradients ), TRIM( slices )
	1346
	1347	!
	1348	!-- Initial humidity profile
	1349	!-- Building output strings, starting with surface humidity
[75]	1350	IF ( humidity .OR. passive_scalar ) THEN
[1]	1351	WRITE ( temperatures, '(E8.1)' ) q_surface
	1352	gradients = '--------'
	1353	slices = ' 0'
	1354	coordinates = ' 0.0'
	1355	i = 1
	1356	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1357
	1358	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1359	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1360
	1361	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1362	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1363
	1364	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1365	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1366
	1367	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1368	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1369
[430]	1370	IF ( i == 10 ) THEN
	1371	EXIT
	1372	ELSE
	1373	i = i + 1
	1374	ENDIF
	1375
[1]	1376	ENDDO
	1377
[75]	1378	IF ( humidity ) THEN
[1]	1379	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1380	TRIM( gradients ), TRIM( slices )
	1381	ELSE
	1382	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1383	TRIM( gradients ), TRIM( slices )
	1384	ENDIF
	1385	ENDIF
	1386
	1387	!
[97]	1388	!-- Initial salinity profile
	1389	!-- Building output strings, starting with surface salinity
	1390	IF ( ocean ) THEN
	1391	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1392	gradients = '------'
	1393	slices = ' 0'
	1394	coordinates = ' 0.0'
	1395	i = 1
	1396	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1397
	1398	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1399	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1400
	1401	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1402	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1403
	1404	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1405	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1406
	1407	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1408	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1409
[430]	1410	IF ( i == 10 ) THEN
	1411	EXIT
	1412	ELSE
	1413	i = i + 1
	1414	ENDIF
	1415
[97]	1416	ENDDO
	1417
	1418	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1419	TRIM( gradients ), TRIM( slices )
	1420	ENDIF
	1421
	1422	!
[411]	1423	!-- Profile for the large scale vertial velocity
	1424	!-- Building output strings, starting with surface value
	1425	IF ( large_scale_subsidence ) THEN
	1426	temperatures = ' 0.0'
	1427	gradients = '------'
	1428	slices = ' 0'
	1429	coordinates = ' 0.0'
	1430	i = 1
[580]	1431	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1432
	1433	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1434	w_subs(subs_vertical_gradient_level_i(i))
[411]	1435	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1436
[580]	1437	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1438	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1439
[580]	1440	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1441	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1442
[580]	1443	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1444	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1445
[430]	1446	IF ( i == 10 ) THEN
	1447	EXIT
	1448	ELSE
	1449	i = i + 1
	1450	ENDIF
	1451
[411]	1452	ENDDO
	1453
	1454	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1455	TRIM( gradients ), TRIM( slices )
	1456	ENDIF
	1457
	1458	!
[1]	1459	!-- LES / turbulence parameters
	1460	WRITE ( io, 450 )
	1461
	1462	!--
	1463	! ... LES-constants used must still be added here
	1464	!--
	1465	IF ( constant_diffusion ) THEN
	1466	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1467	prandtl_number
	1468	ENDIF
	1469	IF ( .NOT. constant_diffusion) THEN
[108]	1470	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1471	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1472	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1473	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1474	ENDIF
	1475
	1476	!
	1477	!-- Special actions during the run
	1478	WRITE ( io, 470 )
	1479	IF ( create_disturbances ) THEN
	1480	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1481	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1482	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1483	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1484	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1485	ELSE
	1486	WRITE ( io, 473 ) disturbance_energy_limit
	1487	ENDIF
	1488	WRITE ( io, 474 ) TRIM( random_generator )
	1489	ENDIF
	1490	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1491	WRITE ( io, 475 ) pt_surface_initial_change
	1492	ENDIF
[75]	1493	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1494	WRITE ( io, 476 ) q_surface_initial_change
	1495	ENDIF
	1496	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1497	WRITE ( io, 477 ) q_surface_initial_change
	1498	ENDIF
	1499
[60]	1500	IF ( particle_advection ) THEN
[1]	1501	!
[60]	1502	!-- Particle attributes
	1503	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1504	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1505	end_time_prel, dt_sort_particles
[60]	1506	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1507	IF ( random_start_position ) WRITE ( io, 481 )
	1508	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1509	WRITE ( io, 495 ) total_number_of_particles
	1510	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1511	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1512	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1513	WRITE ( io, 484 ) total_number_of_tails, &
	1514	minimum_tailpoint_distance, &
	1515	maximum_tailpoint_age
	1516	ENDIF
[1]	1517	ENDIF
[60]	1518	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1519	WRITE ( io, 485 ) dt_write_particle_data
	1520	output_format = ''
	1521	IF ( netcdf_output ) THEN
[493]	1522	IF ( netcdf_data_format > 1 ) THEN
[60]	1523	output_format = 'netcdf (64 bit offset) and binary'
	1524	ELSE
	1525	output_format = 'netcdf and binary'
	1526	ENDIF
[1]	1527	ELSE
[60]	1528	output_format = 'binary'
[1]	1529	ENDIF
[292]	1530	WRITE ( io, 344 ) output_format
[1]	1531	ENDIF
[60]	1532	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1533	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1534
[60]	1535	WRITE ( io, 487 ) number_of_particle_groups
[1]	1536
[60]	1537	DO i = 1, number_of_particle_groups
	1538	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1539	WRITE ( io, 490 ) i, 0.0
	1540	WRITE ( io, 492 )
[1]	1541	ELSE
[60]	1542	WRITE ( io, 490 ) i, radius(i)
	1543	IF ( density_ratio(i) /= 0.0 ) THEN
	1544	WRITE ( io, 491 ) density_ratio(i)
	1545	ELSE
	1546	WRITE ( io, 492 )
	1547	ENDIF
[1]	1548	ENDIF
[60]	1549	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1550	pdx(i), pdy(i), pdz(i)
[336]	1551	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1552	ENDDO
[1]	1553
[60]	1554	ENDIF
[1]	1555
[60]	1556
[1]	1557	!
	1558	!-- Parameters of 1D-model
	1559	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1560	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1561	mixing_length_1d, dissipation_1d
	1562	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1563	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1564	ENDIF
	1565	ENDIF
	1566
	1567	!
	1568	!-- User-defined informations
	1569	CALL user_header( io )
	1570
	1571	WRITE ( io, 99 )
	1572
	1573	!
	1574	!-- Write buffer contents to disc immediately
[82]	1575	CALL local_flush( io )
[1]	1576
	1577	!
	1578	!-- Here the FORMATs start
	1579
	1580	99 FORMAT (1X,78('-'))
[200]	1581	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1582	1X,'* ',A,' *',9X,A/ &
	1583	1X,'***************************',9X,42('-'))
[291]	1584	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1585	37X,42('-'))
[200]	1586	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1587	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1588	' Run on host: ',A10)
[1]	1589	#if defined( __parallel )
[200]	1590	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1591	')',1X,A)
[200]	1592	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1593	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1594	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1595	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1596	37X,'because the job is running on an SMP-cluster')
[102]	1597	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1598	#endif
	1599	110 FORMAT (/' Numerical Schemes:'/ &
	1600	' -----------------'/)
	1601	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1602	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1603	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1604	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1605	' or Upstream')
	1606	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1607	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1608	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1609	' or Upstream')
	1610	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1611	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1612	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1613	' Translation velocity = ',A/ &
	1614	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1615	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1616	' of timestep changes)')
	1617	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1618	' timestep changes')
	1619	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1620	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1621	' maximum damping coefficient: ',F5.3, ' 1/s')
	1622	124 FORMAT (' Spline-overshoots are being suppressed')
	1623	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1624	' of'/ &
	1625	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1626	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1627	' of'/ &
	1628	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1629	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1630	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1631	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1632	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1633	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1634	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1635	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1636	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1637	' effective emissivity scheme')
	1638	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1639	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1640	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1641	A,'-cycle)'/ &
	1642	' number of grid levels: ',I2/ &
	1643	' Gauss-Seidel red/black iterations: ',I2)
	1644	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1645	I3,')')
	1646	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1647	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1648	I3,')'/ &
	1649	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1650	I3,')')
	1651	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1652	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1653	140 FORMAT (' maximum residual allowed: ',E10.3)
	1654	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1655	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1656	'step')
[87]	1657	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1658	'kinetic energy')
[1]	1659	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1660	'conserved'/ &
	1661	' using the ',A,' mode')
	1662	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1663	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1664	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1665	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1666	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1667	'prognostic equation for')
	1668	154 FORMAT (' the potential temperature')
[1]	1669	200 FORMAT (//' Run time and time step information:'/ &
	1670	' ----------------------------------'/)
	1671	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1672	' CFL-factor: ',F4.2)
	1673	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1674	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1675	' End time: ',F9.3,' s')
	1676	204 FORMAT ( A,F9.3,' s')
	1677	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1678	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1679	' CPU-time used: ',F9.3,' s per timestep: ', &
	1680	' ',F9.3,' s'/ &
	1681	' per second of simulated tim', &
	1682	'e: ',F9.3,' s')
[291]	1683	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1684	250 FORMAT (//' Computational grid and domain size:'/ &
	1685	' ----------------------------------'// &
	1686	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1687	' m dz = ',F7.3,' m'/ &
	1688	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1689	' m z(u) = ',F10.3,' m'/)
	1690	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1691	' factor: ',F5.3/ &
	1692	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1693	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1694	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1695	255 FORMAT (' Subdomains have equal size')
	1696	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1697	'have smaller sizes'/ &
	1698	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1699	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1700	' degrees')
	1701	270 FORMAT (//' Topography informations:'/ &
	1702	' -----------------------'// &
	1703	1X,'Topography: ',A)
	1704	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1705	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1706	' / ',I4)
[240]	1707	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1708	' direction' / &
	1709	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1710	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1711	278 FORMAT (' Topography grid definition convention:'/ &
	1712	' cell edge (staggered grid points'/ &
	1713	' (u in x-direction, v in y-direction))' /)
	1714	279 FORMAT (' Topography grid definition convention:'/ &
	1715	' cell center (scalar grid points)' /)
[138]	1716	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1717	' ------------------------------'// &
	1718	' Canopy mode: ', A / &
	1719	' Canopy top: ',I4 / &
	1720	' Leaf drag coefficient: ',F6.2 /)
[153]	1721	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1722	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1723	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1724	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1725	' Height: ',A,' m'/ &
	1726	' Leaf area density: ',A,' m2/m3'/ &
	1727	' Gradient: ',A,' m2/m4'/ &
	1728	' Gridpoint: ',A)
	1729
[1]	1730	300 FORMAT (//' Boundary conditions:'/ &
	1731	' -------------------'// &
	1732	' p uv ', &
	1733	' pt'// &
	1734	' B. bound.: ',A/ &
	1735	' T. bound.: ',A)
[97]	1736	301 FORMAT (/' ',A// &
[1]	1737	' B. bound.: ',A/ &
	1738	' T. bound.: ',A)
[19]	1739	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1740	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1741	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1742	'computational u,v-level:'// &
[1]	1743	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1744	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1745	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1746	307 FORMAT (' Heatflux has a random normal distribution')
	1747	308 FORMAT (' Predefined surface temperature')
[97]	1748	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1749	310 FORMAT (//' 1D-Model:'// &
	1750	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1751	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1752	312 FORMAT (' Predefined surface humidity')
	1753	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1754	314 FORMAT (' Predefined scalar value at the surface')
[19]	1755	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1756	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1757	'atmosphere model')
[1]	1758	317 FORMAT (//' Lateral boundaries:'/ &
	1759	' left/right: ',A/ &
	1760	' north/south: ',A)
	1761	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1762	'max =',F5.1,' m**2/s')
[151]	1763	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1764	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1765	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1766	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1767	' v: ',F9.6,' m2/s2')
[151]	1768	325 FORMAT (//' List output:'/ &
[1]	1769	' -----------'// &
	1770	' 1D-Profiles:'/ &
	1771	' Output every ',F8.2,' s')
[151]	1772	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1773	' Averaging input every ',F8.2,' s')
	1774	330 FORMAT (//' Data output:'/ &
	1775	' -----------'/)
	1776	331 FORMAT (/' 1D-Profiles:')
	1777	332 FORMAT (/' ',A)
	1778	333 FORMAT (' Output every ',F8.2,' s',/ &
	1779	' Time averaged over ',F8.2,' s'/ &
	1780	' Averaging input every ',F8.2,' s')
	1781	334 FORMAT (/' 2D-Arrays',A,':')
	1782	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1783	' Output every ',F8.2,' s ',A/ &
	1784	' Cross sections at ',A1,' = ',A/ &
	1785	' scalar-coordinates: ',A,' m'/)
	1786	336 FORMAT (/' 3D-Arrays',A,':')
	1787	337 FORMAT (/' Arrays: ',A/ &
	1788	' Output every ',F8.2,' s ',A/ &
	1789	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1790	338 FORMAT (' Compressed data output'/ &
	1791	' Decimal precision: ',A/)
	1792	339 FORMAT (' No output during initial ',F8.2,' s')
	1793	340 FORMAT (/' Time series:')
	1794	341 FORMAT (' Output every ',F8.2,' s'/)
	1795	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1796	' Output every ',F8.2,' s ',A/ &
	1797	' Time averaged over ',F8.2,' s'/ &
	1798	' Averaging input every ',F8.2,' s'/ &
	1799	' Cross sections at ',A1,' = ',A/ &
	1800	' scalar-coordinates: ',A,' m'/)
	1801	343 FORMAT (/' Arrays: ',A/ &
	1802	' Output every ',F8.2,' s ',A/ &
	1803	' Time averaged over ',F8.2,' s'/ &
	1804	' Averaging input every ',F8.2,' s'/ &
	1805	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1806	344 FORMAT (' Output format: ',A/)
[410]	1807	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1808	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1809	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1810	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1811	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1812	347 FORMAT (' Variables: ',A/ &
	1813	' Output every ',F8.2,' s')
	1814	348 FORMAT (' Variables: ',A/ &
	1815	' Output every ',F8.2,' s'/ &
	1816	' Time averaged over ',F8.2,' s'/ &
	1817	' Averaging input every ',F8.2,' s')
	1818	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1819	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1820	13(' ',8(F8.2,',')/) )
	1821	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1822	'all gridpoints along ',A,'-direction (default).' )
	1823	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1824	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1825	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1826	#if defined( __dvrp_graphics )
	1827	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1828	' Output every ',F7.1,' s'/ &
	1829	' Output mode: ',A/ &
	1830	' Host / User: ',A,' / ',A/ &
	1831	' Directory: ',A// &
	1832	' The sequence contains:')
[337]	1833	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1834	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1835	362 FORMAT (/' Slicer plane ',A/ &
[336]	1836	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1837	363 FORMAT (/' Particles'/ &
[336]	1838	' particle size: ',F7.2,' m')
	1839	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1840	F6.2,',',F6.2,']')
[337]	1841	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1842	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1843	')'/ &
	1844	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1845	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1846	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1847	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1848	#endif
	1849	#if defined( __spectra )
	1850	370 FORMAT (' Spectra:')
	1851	371 FORMAT (' Output every ',F7.1,' s'/)
	1852	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1853	' Directions: ', 10(A5,',')/ &
[189]	1854	' height levels k = ', 20(I3,',')/ &
	1855	' ', 20(I3,',')/ &
	1856	' ', 20(I3,',')/ &
	1857	' ', 20(I3,',')/ &
	1858	' ', 19(I3,','),I3,'.'/ &
[1]	1859	' height levels selected for standard plot:'/ &
[189]	1860	' k = ', 20(I3,',')/ &
	1861	' ', 20(I3,',')/ &
	1862	' ', 20(I3,',')/ &
	1863	' ', 20(I3,',')/ &
	1864	' ', 19(I3,','),I3,'.'/ &
[1]	1865	' Time averaged over ', F7.1, ' s,' / &
	1866	' Profiles for the time averaging are taken every ', &
	1867	F6.1,' s')
	1868	#endif
	1869	400 FORMAT (//' Physical quantities:'/ &
	1870	' -------------------'/)
	1871	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1872	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1873	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1874	' f* = ',F9.6,' 1/s')
	1875	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1876	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1877	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1878	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1879	' ------------------------'/)
[57]	1880	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1881	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1882	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1883	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1884	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1885	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1886	' Height: ',A,' m'/ &
	1887	' Temperature: ',A,' K'/ &
	1888	' Gradient: ',A,' K/100m'/ &
	1889	' Gridpoint: ',A)
	1890	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1891	' Height: ',A,' m'/ &
	1892	' Humidity: ',A,' kg/kg'/ &
	1893	' Gradient: ',A,' (kg/kg)/100m'/ &
	1894	' Gridpoint: ',A)
	1895	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1896	' Height: ',A,' m'/ &
	1897	' Scalar concentration: ',A,' kg/m**3'/ &
	1898	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1899	' Gridpoint: ',A)
	1900	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1901	' Height: ',A,' m'/ &
	1902	' ug: ',A,' m/s'/ &
	1903	' Gradient: ',A,' 1/100s'/ &
	1904	' Gridpoint: ',A)
	1905	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1906	' Height: ',A,' m'/ &
[97]	1907	' vg: ',A,' m/s'/ &
[1]	1908	' Gradient: ',A,' 1/100s'/ &
	1909	' Gridpoint: ',A)
[97]	1910	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1911	' Height: ',A,' m'/ &
	1912	' Salinity: ',A,' psu'/ &
	1913	' Gradient: ',A,' psu/100m'/ &
	1914	' Gridpoint: ',A)
[411]	1915	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1916	' Height: ',A,' m'/ &
	1917	' w_subs: ',A,' m/s'/ &
	1918	' Gradient: ',A,' (m/s)/100m'/ &
	1919	' Gridpoint: ',A)
[1]	1920	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1921	' ---------------------------'/)
	1922	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1923	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1924	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1925	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1926	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1927	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1928	470 FORMAT (//' Actions during the simulation:'/ &
	1929	' -----------------------------'/)
[94]	1930	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1931	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1932	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1933	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1934	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1935	' to i/j =',I4)
	1936	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1937	1X,F5.3, ' m2/s2')
	1938	474 FORMAT (' Random number generator used : ',A/)
	1939	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1940	'respectively, if'/ &
	1941	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1942	' 3D-simulation'/)
	1943	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1944	'respectively, if the'/ &
	1945	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1946	' the 3D-simulation'/)
	1947	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1948	'respectively, if the'/ &
	1949	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1950	' the 3D-simulation'/)
	1951	480 FORMAT (' Particles:'/ &
	1952	' ---------'// &
	1953	' Particle advection is active (switched on at t = ', F7.1, &
	1954	' s)'/ &
	1955	' Start of new particle generations every ',F6.1,' s'/ &
	1956	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1957	' bottom: ', A, ' top: ', A/&
	1958	' Maximum particle age: ',F9.1,' s'/ &
[117]	1959	' Advection stopped at t = ',F9.1,' s'/ &
	1960	' Particles are sorted every ',F9.1,' s'/)
[1]	1961	481 FORMAT (' Particles have random start positions'/)
[336]	1962	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1963	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1964	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1965	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1966	' Maximum age of the end of the tail: ',F8.2,' s')
	1967	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1968	486 FORMAT (' Particle statistics are written on file'/)
	1969	487 FORMAT (' Number of particle groups: ',I2/)
	1970	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1971	' minimum timestep for advection: ', F7.5/)
	1972	489 FORMAT (' Number of particles simultaneously released at each ', &
	1973	'point: ', I5/)
	1974	490 FORMAT (' Particle group ',I2,':'/ &
	1975	' Particle radius: ',E10.3, 'm')
	1976	491 FORMAT (' Particle inertia is activated'/ &
	1977	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1978	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1979	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1980	' y:',F8.1,' - ',F8.1,' m'/&
	1981	' z:',F8.1,' - ',F8.1,' m'/&
	1982	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1983	' m dz = ',F8.1,' m'/)
	1984	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1985	F8.2,' s'/)
	1986	495 FORMAT (' Number of particles in total domain: ',I10/)
	1987	500 FORMAT (//' 1D-Model parameters:'/ &
	1988	' -------------------'// &
	1989	' Simulation time: ',F8.1,' s'/ &
	1990	' Run-controll output every: ',F8.1,' s'/ &
	1991	' Vertical profile output every: ',F8.1,' s'/ &
	1992	' Mixing length calculation: ',A/ &
	1993	' Dissipation calculation: ',A/)
	1994	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1995	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1996	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1997
	1998
	1999	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |