Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 704

Last change on this file since 704 was 668, checked in by suehring, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 77.0 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
	7	! Former revisions:
	8	! -----------------
	9	! $Id: header.f90 668 2010-12-23 13:22:58Z suehring $
	10	!
[668]	11	! 667 2010-12-23 12:06:00Z suehring/gryschka
	12	! Output of advection scheme.
	13	! Modified output of Prandtl-layer height.
	14	!
[581]	15	! 580 2010-10-05 13:59:11Z heinze
	16	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	17	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	18	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	19	!
[494]	20	! 493 2010-03-01 08:30:24Z raasch
	21	! NetCDF data output format extendend for NetCDF4/HDF5
	22	!
[482]	23	! 449 2010-02-02 11:23:59Z raasch
	24	! +large scale vertical motion (subsidence/ascent)
	25	! Bugfix: index problem concerning gradient_level indices removed
	26	!
[449]	27	! 410 2009-12-04 17:05:40Z letzel
	28	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	29	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	30	!
[392]	31	! 346 2009-07-06 10:13:41Z raasch
[328]	32	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	33	! Coupling with independent precursor runs.
[254]	34	! Output of messages replaced by message handling routine.
[336]	35	! Output of several additional dvr parameters
[240]	36	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	37	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	38	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	39	! topography_grid_convention moved from user_header
[292]	40	! small bugfix concerning 3d 64bit netcdf output format
[1]	41	!
[226]	42	! 206 2008-10-13 14:59:11Z raasch
	43	! Bugfix: error in zu index in case of section_xy = -1
	44	!
[200]	45	! 198 2008-09-17 08:55:28Z raasch
	46	! Format adjustments allowing output of larger revision numbers
	47	!
[198]	48	! 197 2008-09-16 15:29:03Z raasch
	49	! allow 100 spectra levels instead of 10 for consistency with
	50	! define_netcdf_header,
	51	! bugfix in the output of the characteristic levels of potential temperature,
	52	! geostrophic wind, scalar concentration, humidity and leaf area density,
	53	! output of turbulence recycling informations
	54	!
[139]	55	! 138 2007-11-28 10:03:58Z letzel
	56	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	57	! Allow two instead of one digit to specify isosurface and slicer variables.
	58	! Output of sorting frequency of particles
	59	!
[110]	60	! 108 2007-08-24 15:10:38Z letzel
	61	! Output of informations for coupled model runs (boundary conditions etc.)
	62	! + output of momentumfluxes at the top boundary
	63	! Rayleigh damping for ocean, e_init
	64	!
[98]	65	! 97 2007-06-21 08:23:15Z raasch
	66	! Adjustments for the ocean version.
	67	! use_pt_reference renamed use_reference
	68	!
[90]	69	! 87 2007-05-22 15:46:47Z raasch
	70	! Bugfix: output of use_upstream_for_tke
	71	!
[83]	72	! 82 2007-04-16 15:40:52Z raasch
	73	! Preprocessor strings for different linux clusters changed to "lc",
	74	! routine local_flush is used for buffer flushing
	75	!
[77]	76	! 76 2007-03-29 00:58:32Z raasch
	77	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	78	! output of the loop optimization method, moisture renamed humidity,
	79	! output of subversion revision number
	80	!
[39]	81	! 19 2007-02-23 04:53:48Z raasch
	82	! Output of scalar flux applied at top boundary
	83	!
[3]	84	! RCS Log replace by Id keyword, revision history cleaned up
	85	!
[1]	86	! Revision 1.63 2006/08/22 13:53:13 raasch
	87	! Output of dz_max
	88	!
	89	! Revision 1.1 1997/08/11 06:17:20 raasch
	90	! Initial revision
	91	!
	92	!
	93	! Description:
	94	! ------------
	95	! Writing a header with all important informations about the actual run.
	96	! This subroutine is called three times, two times at the beginning
	97	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	98	! end of the run, then writing additional information about CPU-usage on file
	99	! header.
[411]	100	!-----------------------------------------------------------------------------!
[1]	101
	102	USE arrays_3d
	103	USE control_parameters
	104	USE cloud_parameters
	105	USE cpulog
	106	USE dvrp_variables
	107	USE grid_variables
	108	USE indices
	109	USE model_1d
	110	USE particle_attributes
	111	USE pegrid
[411]	112	USE subsidence_mod
[1]	113	USE spectrum
	114
	115	IMPLICIT NONE
	116
	117	CHARACTER (LEN=1) :: prec
	118	CHARACTER (LEN=2) :: do2d_mode
	119	CHARACTER (LEN=5) :: section_chr
	120	CHARACTER (LEN=9) :: time_to_string
	121	CHARACTER (LEN=10) :: coor_chr, host_chr
	122	CHARACTER (LEN=16) :: begin_chr
[200]	123	CHARACTER (LEN=23) :: ver_rev
[1]	124	CHARACTER (LEN=40) :: output_format
[167]	125	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	126	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	127	domask_chr, run_classification
[167]	128	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	129	temperatures, ugcomponent, vgcomponent
[1]	130	CHARACTER (LEN=85) :: roben, runten
	131
[410]	132	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	133
	134	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	135	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	136	REAL :: cpuseconds_per_simulated_second
	137
	138	!
	139	!-- Open the output file. At the end of the simulation, output is directed
	140	!-- to unit 19.
	141	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	142	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	143	io = 15 ! header output on file RUN_CONTROL
	144	ELSE
	145	io = 19 ! header output on file HEADER
	146	ENDIF
	147	CALL check_open( io )
	148
	149	!
	150	!-- At the end of the run, output file (HEADER) will be rewritten with
	151	!-- new informations
	152	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	153
	154	!
	155	!-- Determine kind of model run
	156	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	157	run_classification = '3D - restart run'
[328]	158	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	159	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	160	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	161	run_classification = '3D - run without 1D - prerun'
[197]	162	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	163	run_classification = '3D - run with 1D - prerun'
[197]	164	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	165	run_classification = '3D - run initialized by user'
[1]	166	ELSE
[254]	167	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	168	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	169	ENDIF
[97]	170	IF ( ocean ) THEN
	171	run_classification = 'ocean - ' // run_classification
	172	ELSE
	173	run_classification = 'atmosphere - ' // run_classification
	174	ENDIF
[1]	175
	176	!
	177	!-- Run-identification, date, time, host
	178	host_chr = host(1:10)
[75]	179	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	180	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	181	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	182	#if defined( __mpi2 )
	183	mpi_type = 2
	184	#else
	185	mpi_type = 1
	186	#endif
	187	WRITE ( io, 101 ) mpi_type, coupling_mode
	188	ENDIF
[102]	189	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	190	ADJUSTR( host_chr )
[1]	191	#if defined( __parallel )
	192	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	193	char1 = 'calculated'
	194	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	195	host(1:2) == 'lc' ) .AND. &
	196	npex == -1 .AND. pdims(2) == 1 ) THEN
	197	char1 = 'forced'
	198	ELSE
	199	char1 = 'predefined'
	200	ENDIF
	201	IF ( threads_per_task == 1 ) THEN
[102]	202	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	203	ELSE
[102]	204	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	205	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	206	ENDIF
	207	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	208	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	209	npex == -1 .AND. pdims(2) == 1 ) &
	210	THEN
[102]	211	WRITE ( io, 106 )
[1]	212	ELSEIF ( pdims(2) == 1 ) THEN
[102]	213	WRITE ( io, 107 ) 'x'
[1]	214	ELSEIF ( pdims(1) == 1 ) THEN
[102]	215	WRITE ( io, 107 ) 'y'
[1]	216	ENDIF
[102]	217	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	218	#endif
	219	WRITE ( io, 99 )
	220
	221	!
	222	!-- Numerical schemes
	223	WRITE ( io, 110 )
	224	IF ( psolver(1:7) == 'poisfft' ) THEN
	225	WRITE ( io, 111 ) TRIM( fft_method )
	226	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	227	ELSEIF ( psolver == 'sor' ) THEN
	228	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	229	ELSEIF ( psolver == 'multigrid' ) THEN
	230	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	231	IF ( mg_cycles == -1 ) THEN
	232	WRITE ( io, 140 ) residual_limit
	233	ELSE
	234	WRITE ( io, 141 ) mg_cycles
	235	ENDIF
	236	IF ( mg_switch_to_pe0_level == 0 ) THEN
	237	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	238	nzt_mg(1)
[197]	239	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	240	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	241	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	242	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	243	nzt_mg(mg_switch_to_pe0_level), &
	244	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	245	nzt_mg(1)
	246	ENDIF
	247	ENDIF
	248	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	249	THEN
	250	WRITE ( io, 142 )
	251	ENDIF
	252
	253	IF ( momentum_advec == 'pw-scheme' ) THEN
	254	WRITE ( io, 113 )
[667]	255	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
	256	WRITE ( io, 503 )
	257	ELSEIF (momentum_advec == 'ups-scheme' ) THEN
[1]	258	WRITE ( io, 114 )
	259	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	260	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	261	overshoot_limit_w /= 0.0 ) THEN
	262	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	263	overshoot_limit_w
	264	ENDIF
	265	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	266	ups_limit_w /= 0.0 ) &
	267	THEN
	268	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	269	ENDIF
	270	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	271	ENDIF
	272	IF ( scalar_advec == 'pw-scheme' ) THEN
	273	WRITE ( io, 116 )
[667]	274	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	275	WRITE ( io, 504 )
[1]	276	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	277	WRITE ( io, 117 )
	278	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	279	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	280	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	281	ENDIF
	282	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	283	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	284	ENDIF
	285	ELSE
	286	WRITE ( io, 118 )
	287	ENDIF
[63]	288
	289	WRITE ( io, 139 ) TRIM( loop_optimization )
	290
[1]	291	IF ( galilei_transformation ) THEN
	292	IF ( use_ug_for_galilei_tr ) THEN
	293	char1 = 'geostrophic wind'
	294	ELSE
	295	char1 = 'mean wind in model domain'
	296	ENDIF
	297	IF ( simulated_time_at_begin == simulated_time ) THEN
	298	char2 = 'at the start of the run'
	299	ELSE
	300	char2 = 'at the end of the run'
	301	ENDIF
	302	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	303	advected_distance_x/1000.0, advected_distance_y/1000.0
	304	ENDIF
	305	IF ( timestep_scheme == 'leapfrog' ) THEN
	306	WRITE ( io, 120 )
	307	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	308	WRITE ( io, 121 )
	309	ELSE
	310	WRITE ( io, 122 ) timestep_scheme
	311	ENDIF
[87]	312	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	313	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	314	IF ( .NOT. ocean ) THEN
	315	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	316	rayleigh_damping_factor
	317	ELSE
	318	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	319	rayleigh_damping_factor
	320	ENDIF
[1]	321	ENDIF
[75]	322	IF ( humidity ) THEN
[1]	323	IF ( .NOT. cloud_physics ) THEN
	324	WRITE ( io, 129 )
	325	ELSE
	326	WRITE ( io, 130 )
	327	WRITE ( io, 131 )
	328	IF ( radiation ) WRITE ( io, 132 )
	329	IF ( precipitation ) WRITE ( io, 133 )
	330	ENDIF
	331	ENDIF
	332	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	333	IF ( conserve_volume_flow ) THEN
[241]	334	WRITE ( io, 150 ) conserve_volume_flow_mode
	335	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	336	WRITE ( io, 151 ) u_bulk, v_bulk
	337	ENDIF
[240]	338	ELSEIF ( dp_external ) THEN
	339	IF ( dp_smooth ) THEN
[241]	340	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	341	ELSE
[241]	342	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	343	ENDIF
	344	ENDIF
[411]	345	IF ( large_scale_subsidence ) THEN
	346	WRITE ( io, 153 )
	347	WRITE ( io, 154 )
	348	ENDIF
[1]	349	WRITE ( io, 99 )
	350
	351	!
	352	!-- Runtime and timestep informations
	353	WRITE ( io, 200 )
	354	IF ( .NOT. dt_fixed ) THEN
	355	WRITE ( io, 201 ) dt_max, cfl_factor
	356	ELSE
	357	WRITE ( io, 202 ) dt
	358	ENDIF
	359	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	360
	361	IF ( time_restart /= 9999999.9 .AND. &
	362	simulated_time_at_begin == simulated_time ) THEN
	363	IF ( dt_restart == 9999999.9 ) THEN
	364	WRITE ( io, 204 ) ' Restart at: ',time_restart
	365	ELSE
	366	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	367	ENDIF
	368	ENDIF
	369
	370	IF ( simulated_time_at_begin /= simulated_time ) THEN
	371	i = MAX ( log_point_s(10)%counts, 1 )
	372	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	373	cpuseconds_per_simulated_second = 0.0
	374	ELSE
	375	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	376	( simulated_time - &
	377	simulated_time_at_begin )
	378	ENDIF
	379	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	380	log_point_s(10)%sum / REAL( i ), &
	381	cpuseconds_per_simulated_second
	382	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	383	IF ( dt_restart == 9999999.9 ) THEN
	384	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	385	ELSE
	386	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	387	ENDIF
	388	ENDIF
	389	ENDIF
	390
	391	!
[291]	392	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	393	!-- and ocean are used. In this case, coupling_start_time defines the time
	394	!-- when the coupling is switched on.
	395	IF ( coupling_start_time /= 0.0 ) THEN
	396	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	397	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	398	ELSE
	399	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	400	'precursor runs'
	401	ENDIF
	402	WRITE ( io, 207 ) char1, coupling_start_time
	403	ENDIF
	404
	405	!
[1]	406	!-- Computational grid
[94]	407	IF ( .NOT. ocean ) THEN
	408	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	409	IF ( dz_stretch_level_index < nzt+1 ) THEN
	410	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	411	dz_stretch_factor, dz_max
	412	ENDIF
	413	ELSE
	414	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	415	IF ( dz_stretch_level_index > 0 ) THEN
	416	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	417	dz_stretch_factor, dz_max
	418	ENDIF
[1]	419	ENDIF
	420	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	421	MIN( nnz+2, nzt+2 )
[76]	422	IF ( numprocs > 1 ) THEN
	423	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	424	WRITE ( io, 255 )
	425	ELSE
	426	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	427	ENDIF
[1]	428	ENDIF
	429	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	430
	431	!
	432	!-- Topography
	433	WRITE ( io, 270 ) topography
	434	SELECT CASE ( TRIM( topography ) )
	435
	436	CASE ( 'flat' )
	437	! no actions necessary
	438
	439	CASE ( 'single_building' )
	440	blx = INT( building_length_x / dx )
	441	bly = INT( building_length_y / dy )
	442	bh = INT( building_height / dz )
	443
	444	IF ( building_wall_left == 9999999.9 ) THEN
	445	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	446	ENDIF
	447	bxl = INT ( building_wall_left / dx + 0.5 )
	448	bxr = bxl + blx
	449
	450	IF ( building_wall_south == 9999999.9 ) THEN
	451	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	452	ENDIF
	453	bys = INT ( building_wall_south / dy + 0.5 )
	454	byn = bys + bly
	455
	456	WRITE ( io, 271 ) building_length_x, building_length_y, &
	457	building_height, bxl, bxr, bys, byn
	458
[240]	459	CASE ( 'single_street_canyon' )
	460	ch = NINT( canyon_height / dz )
	461	IF ( canyon_width_x /= 9999999.9 ) THEN
	462	!
	463	!-- Street canyon in y direction
	464	cwx = NINT( canyon_width_x / dx )
	465	IF ( canyon_wall_left == 9999999.9 ) THEN
	466	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	467	ENDIF
	468	cxl = NINT( canyon_wall_left / dx )
	469	cxr = cxl + cwx
	470	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	471
	472	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	473	!
	474	!-- Street canyon in x direction
	475	cwy = NINT( canyon_width_y / dy )
	476	IF ( canyon_wall_south == 9999999.9 ) THEN
	477	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	478	ENDIF
	479	cys = NINT( canyon_wall_south / dy )
	480	cyn = cys + cwy
	481	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	482	ENDIF
	483
[1]	484	END SELECT
	485
[256]	486	IF ( TRIM( topography ) /= 'flat' ) THEN
	487	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	488	IF ( TRIM( topography ) == 'single_building' .OR. &
	489	TRIM( topography ) == 'single_street_canyon' ) THEN
	490	WRITE ( io, 278 )
	491	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	492	WRITE ( io, 279 )
	493	ENDIF
	494	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	495	WRITE ( io, 278 )
	496	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	497	WRITE ( io, 279 )
	498	ENDIF
	499	ENDIF
	500
[138]	501	IF ( plant_canopy ) THEN
	502
	503	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	504	IF ( passive_scalar ) THEN
	505	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	506	leaf_surface_concentration
	507	ENDIF
[138]	508
[1]	509	!
[153]	510	!-- Heat flux at the top of vegetation
	511	WRITE ( io, 282 ) cthf
	512
	513	!
[138]	514	!-- Leaf area density profile
	515	!-- Building output strings, starting with surface value
	516	WRITE ( learde, '(F6.2)' ) lad_surface
	517	gradients = '------'
	518	slices = ' 0'
	519	coordinates = ' 0.0'
	520	i = 1
	521	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	522
	523	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	524	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	525
	526	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	527	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	528
	529	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	530	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	531
	532	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	533	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	534
	535	i = i + 1
	536	ENDDO
	537
[153]	538	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	539	TRIM( gradients ), TRIM( slices )
	540
	541	ENDIF
	542
	543	!
[1]	544	!-- Boundary conditions
	545	IF ( ibc_p_b == 0 ) THEN
	546	runten = 'p(0) = 0 \|'
	547	ELSEIF ( ibc_p_b == 1 ) THEN
	548	runten = 'p(0) = p(1) \|'
	549	ELSE
	550	runten = 'p(0) = p(1) +R\|'
	551	ENDIF
	552	IF ( ibc_p_t == 0 ) THEN
	553	roben = 'p(nzt+1) = 0 \|'
	554	ELSE
	555	roben = 'p(nzt+1) = p(nzt) \|'
	556	ENDIF
	557
	558	IF ( ibc_uv_b == 0 ) THEN
	559	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	560	ELSE
	561	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	562	ENDIF
[132]	563	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	564	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	565	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	566	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	567	ELSE
	568	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	569	ENDIF
	570
	571	IF ( ibc_pt_b == 0 ) THEN
	572	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	573	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	574	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	575	ELSEIF ( ibc_pt_b == 2 ) THEN
	576	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	577	ENDIF
	578	IF ( ibc_pt_t == 0 ) THEN
[19]	579	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	580	ELSEIF( ibc_pt_t == 1 ) THEN
	581	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	582	ELSEIF( ibc_pt_t == 2 ) THEN
	583	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	584
[1]	585	ENDIF
	586
	587	WRITE ( io, 300 ) runten, roben
	588
	589	IF ( .NOT. constant_diffusion ) THEN
	590	IF ( ibc_e_b == 1 ) THEN
	591	runten = 'e(0) = e(1)'
	592	ELSE
	593	runten = 'e(0) = e(1) = (u/0.1)*2'
	594	ENDIF
	595	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	596
[97]	597	WRITE ( io, 301 ) 'e', runten, roben
[1]	598
	599	ENDIF
	600
[97]	601	IF ( ocean ) THEN
	602	runten = 'sa(0) = sa(1)'
	603	IF ( ibc_sa_t == 0 ) THEN
	604	roben = 'sa(nzt+1) = sa_surface'
[1]	605	ELSE
[97]	606	roben = 'sa(nzt+1) = sa(nzt)'
[1]	607	ENDIF
[97]	608	WRITE ( io, 301 ) 'sa', runten, roben
	609	ENDIF
[1]	610
[97]	611	IF ( humidity ) THEN
	612	IF ( ibc_q_b == 0 ) THEN
	613	runten = 'q(0) = q_surface'
	614	ELSE
	615	runten = 'q(0) = q(1)'
	616	ENDIF
	617	IF ( ibc_q_t == 0 ) THEN
	618	roben = 'q(nzt) = q_top'
	619	ELSE
	620	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	621	ENDIF
	622	WRITE ( io, 301 ) 'q', runten, roben
	623	ENDIF
[1]	624
[97]	625	IF ( passive_scalar ) THEN
	626	IF ( ibc_q_b == 0 ) THEN
	627	runten = 's(0) = s_surface'
	628	ELSE
	629	runten = 's(0) = s(1)'
	630	ENDIF
	631	IF ( ibc_q_t == 0 ) THEN
	632	roben = 's(nzt) = s_top'
	633	ELSE
	634	roben = 's(nzt) = s(nzt-1) + ds/dz'
	635	ENDIF
	636	WRITE ( io, 301 ) 's', runten, roben
[1]	637	ENDIF
	638
	639	IF ( use_surface_fluxes ) THEN
	640	WRITE ( io, 303 )
	641	IF ( constant_heatflux ) THEN
	642	WRITE ( io, 306 ) surface_heatflux
	643	IF ( random_heatflux ) WRITE ( io, 307 )
	644	ENDIF
[75]	645	IF ( humidity .AND. constant_waterflux ) THEN
[1]	646	WRITE ( io, 311 ) surface_waterflux
	647	ENDIF
	648	IF ( passive_scalar .AND. constant_waterflux ) THEN
	649	WRITE ( io, 313 ) surface_waterflux
	650	ENDIF
	651	ENDIF
	652
[19]	653	IF ( use_top_fluxes ) THEN
	654	WRITE ( io, 304 )
[102]	655	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	656	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	657	IF ( constant_top_heatflux ) THEN
	658	WRITE ( io, 306 ) top_heatflux
	659	ENDIF
	660	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	661	WRITE ( io, 316 )
[19]	662	ENDIF
[97]	663	IF ( ocean .AND. constant_top_salinityflux ) THEN
	664	WRITE ( io, 309 ) top_salinityflux
	665	ENDIF
[75]	666	IF ( humidity .OR. passive_scalar ) THEN
[19]	667	WRITE ( io, 315 )
	668	ENDIF
	669	ENDIF
	670
[1]	671	IF ( prandtl_layer ) THEN
[667]	672	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, kappa, &
[94]	673	rif_min, rif_max
[1]	674	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	675	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	676	WRITE ( io, 312 )
	677	ENDIF
	678	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	679	WRITE ( io, 314 )
	680	ENDIF
	681	ELSE
	682	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	683	WRITE ( io, 310 ) rif_min, rif_max
	684	ENDIF
	685	ENDIF
	686
	687	WRITE ( io, 317 ) bc_lr, bc_ns
	688	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	689	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	690	IF ( turbulent_inflow ) THEN
	691	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	692	inflow_damping_height, inflow_damping_width
	693	ENDIF
[1]	694	ENDIF
	695
	696	!
	697	!-- Listing of 1D-profiles
[151]	698	WRITE ( io, 325 ) dt_dopr_listing
[1]	699	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	700	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	701	ENDIF
	702
	703	!
	704	!-- DATA output
	705	WRITE ( io, 330 )
	706	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	707	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	708	ENDIF
	709
	710	!
	711	!-- 1D-profiles
[346]	712	dopr_chr = 'Profile:'
[1]	713	IF ( dopr_n /= 0 ) THEN
	714	WRITE ( io, 331 )
	715
	716	output_format = ''
	717	IF ( netcdf_output ) THEN
[493]	718	IF ( netcdf_data_format == 1 ) THEN
	719	output_format = 'NetCDF classic'
[1]	720	ELSE
[493]	721	output_format = 'NetCDF 64bit offset'
[1]	722	ENDIF
	723	ENDIF
	724	IF ( profil_output ) THEN
	725	IF ( netcdf_output ) THEN
	726	output_format = TRIM( output_format ) // ' and profil'
	727	ELSE
	728	output_format = 'profil'
	729	ENDIF
	730	ENDIF
[292]	731	WRITE ( io, 344 ) output_format
[1]	732
	733	DO i = 1, dopr_n
	734	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	735	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	736	WRITE ( io, 332 ) dopr_chr
	737	dopr_chr = ' :'
	738	ENDIF
	739	ENDDO
	740
	741	IF ( dopr_chr /= '' ) THEN
	742	WRITE ( io, 332 ) dopr_chr
	743	ENDIF
	744	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	745	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	746	ENDIF
	747
	748	!
	749	!-- 2D-arrays
	750	DO av = 0, 1
	751
	752	i = 1
	753	do2d_xy = ''
	754	do2d_xz = ''
	755	do2d_yz = ''
	756	DO WHILE ( do2d(av,i) /= ' ' )
	757
	758	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	759	do2d_mode = do2d(av,i)(l-1:l)
	760
	761	SELECT CASE ( do2d_mode )
	762	CASE ( 'xy' )
	763	ll = LEN_TRIM( do2d_xy )
	764	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	765	CASE ( 'xz' )
	766	ll = LEN_TRIM( do2d_xz )
	767	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	768	CASE ( 'yz' )
	769	ll = LEN_TRIM( do2d_yz )
	770	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	771	END SELECT
	772
	773	i = i + 1
	774
	775	ENDDO
	776
	777	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	778	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	779	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	780	( netcdf_output .OR. iso2d_output ) ) THEN
	781
	782	IF ( av == 0 ) THEN
	783	WRITE ( io, 334 ) ''
	784	ELSE
	785	WRITE ( io, 334 ) '(time-averaged)'
	786	ENDIF
	787
	788	IF ( do2d_at_begin ) THEN
	789	begin_chr = 'and at the start'
	790	ELSE
	791	begin_chr = ''
	792	ENDIF
	793
	794	output_format = ''
	795	IF ( netcdf_output ) THEN
[493]	796	IF ( netcdf_data_format == 1 ) THEN
	797	output_format = 'NetCDF classic'
	798	ELSEIF ( netcdf_data_format == 2 ) THEN
	799	output_format = 'NetCDF 64bit offset'
	800	ELSEIF ( netcdf_data_format == 3 ) THEN
	801	output_format = 'NetCDF4/HDF5'
	802	ELSEIF ( netcdf_data_format == 4 ) THEN
	803	output_format = 'NetCDF4/HDF5 clasic'
[1]	804	ENDIF
	805	ENDIF
	806	IF ( iso2d_output ) THEN
	807	IF ( netcdf_output ) THEN
	808	output_format = TRIM( output_format ) // ' and iso2d'
	809	ELSE
	810	output_format = 'iso2d'
	811	ENDIF
	812	ENDIF
[292]	813	WRITE ( io, 344 ) output_format
[1]	814
	815	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	816	i = 1
	817	slices = '/'
	818	coordinates = '/'
	819	!
	820	!-- Building strings with index and coordinate informations of the
	821	!-- slices
	822	DO WHILE ( section(i,1) /= -9999 )
	823
	824	WRITE (section_chr,'(I5)') section(i,1)
	825	section_chr = ADJUSTL( section_chr )
	826	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	827
[206]	828	IF ( section(i,1) == -1 ) THEN
	829	WRITE (coor_chr,'(F10.1)') -1.0
	830	ELSE
	831	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	832	ENDIF
[1]	833	coor_chr = ADJUSTL( coor_chr )
	834	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	835
	836	i = i + 1
	837	ENDDO
	838	IF ( av == 0 ) THEN
	839	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	840	TRIM( begin_chr ), 'k', TRIM( slices ), &
	841	TRIM( coordinates )
	842	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	843	WRITE ( io, 339 ) skip_time_do2d_xy
	844	ENDIF
	845	ELSE
	846	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	847	TRIM( begin_chr ), averaging_interval, &
	848	dt_averaging_input, 'k', TRIM( slices ), &
	849	TRIM( coordinates )
	850	IF ( skip_time_data_output_av /= 0.0 ) THEN
	851	WRITE ( io, 339 ) skip_time_data_output_av
	852	ENDIF
	853	ENDIF
	854
	855	ENDIF
	856
	857	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	858	i = 1
	859	slices = '/'
	860	coordinates = '/'
	861	!
	862	!-- Building strings with index and coordinate informations of the
	863	!-- slices
	864	DO WHILE ( section(i,2) /= -9999 )
	865
	866	WRITE (section_chr,'(I5)') section(i,2)
	867	section_chr = ADJUSTL( section_chr )
	868	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	869
	870	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	871	coor_chr = ADJUSTL( coor_chr )
	872	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	873
	874	i = i + 1
	875	ENDDO
	876	IF ( av == 0 ) THEN
	877	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	878	TRIM( begin_chr ), 'j', TRIM( slices ), &
	879	TRIM( coordinates )
	880	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	881	WRITE ( io, 339 ) skip_time_do2d_xz
	882	ENDIF
	883	ELSE
	884	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	885	TRIM( begin_chr ), averaging_interval, &
	886	dt_averaging_input, 'j', TRIM( slices ), &
	887	TRIM( coordinates )
	888	IF ( skip_time_data_output_av /= 0.0 ) THEN
	889	WRITE ( io, 339 ) skip_time_data_output_av
	890	ENDIF
	891	ENDIF
	892	ENDIF
	893
	894	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	895	i = 1
	896	slices = '/'
	897	coordinates = '/'
	898	!
	899	!-- Building strings with index and coordinate informations of the
	900	!-- slices
	901	DO WHILE ( section(i,3) /= -9999 )
	902
	903	WRITE (section_chr,'(I5)') section(i,3)
	904	section_chr = ADJUSTL( section_chr )
	905	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	906
	907	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	908	coor_chr = ADJUSTL( coor_chr )
	909	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	910
	911	i = i + 1
	912	ENDDO
	913	IF ( av == 0 ) THEN
	914	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	915	TRIM( begin_chr ), 'i', TRIM( slices ), &
	916	TRIM( coordinates )
	917	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	918	WRITE ( io, 339 ) skip_time_do2d_yz
	919	ENDIF
	920	ELSE
	921	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	922	TRIM( begin_chr ), averaging_interval, &
	923	dt_averaging_input, 'i', TRIM( slices ), &
	924	TRIM( coordinates )
	925	IF ( skip_time_data_output_av /= 0.0 ) THEN
	926	WRITE ( io, 339 ) skip_time_data_output_av
	927	ENDIF
	928	ENDIF
	929	ENDIF
	930
	931	ENDIF
	932
	933	ENDDO
	934
	935	!
	936	!-- 3d-arrays
	937	DO av = 0, 1
	938
	939	i = 1
	940	do3d_chr = ''
	941	DO WHILE ( do3d(av,i) /= ' ' )
	942
	943	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	944	i = i + 1
	945
	946	ENDDO
	947
	948	IF ( do3d_chr /= '' ) THEN
	949	IF ( av == 0 ) THEN
	950	WRITE ( io, 336 ) ''
	951	ELSE
	952	WRITE ( io, 336 ) '(time-averaged)'
	953	ENDIF
	954
	955	output_format = ''
	956	IF ( netcdf_output ) THEN
[493]	957	IF ( netcdf_data_format == 1 ) THEN
	958	output_format = 'NetCDF classic'
	959	ELSEIF ( netcdf_data_format == 2 ) THEN
	960	output_format = 'NetCDF 64bit offset'
	961	ELSEIF ( netcdf_data_format == 3 ) THEN
	962	output_format = 'NetCDF4/HDF5'
	963	ELSEIF ( netcdf_data_format == 4 ) THEN
	964	output_format = 'NetCDF4/HDF5 clasic'
[1]	965	ENDIF
	966	ENDIF
	967	IF ( avs_output ) THEN
	968	IF ( netcdf_output ) THEN
	969	output_format = TRIM( output_format ) // ' and avs'
	970	ELSE
	971	output_format = 'avs'
	972	ENDIF
	973	ENDIF
[292]	974	WRITE ( io, 344 ) output_format
[1]	975
	976	IF ( do3d_at_begin ) THEN
	977	begin_chr = 'and at the start'
	978	ELSE
	979	begin_chr = ''
	980	ENDIF
	981	IF ( av == 0 ) THEN
	982	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	983	zu(nz_do3d), nz_do3d
	984	ELSE
	985	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	986	TRIM( begin_chr ), averaging_interval, &
	987	dt_averaging_input, zu(nz_do3d), nz_do3d
	988	ENDIF
	989
	990	IF ( do3d_compress ) THEN
	991	do3d_chr = ''
	992	i = 1
	993	DO WHILE ( do3d(av,i) /= ' ' )
	994
	995	SELECT CASE ( do3d(av,i) )
	996	CASE ( 'u' )
	997	j = 1
	998	CASE ( 'v' )
	999	j = 2
	1000	CASE ( 'w' )
	1001	j = 3
	1002	CASE ( 'p' )
	1003	j = 4
	1004	CASE ( 'pt' )
	1005	j = 5
	1006	END SELECT
	1007	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1008	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1009	':' // prec // ','
	1010	i = i + 1
	1011
	1012	ENDDO
	1013	WRITE ( io, 338 ) do3d_chr
	1014
	1015	ENDIF
	1016
	1017	IF ( av == 0 ) THEN
	1018	IF ( skip_time_do3d /= 0.0 ) THEN
	1019	WRITE ( io, 339 ) skip_time_do3d
	1020	ENDIF
	1021	ELSE
	1022	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1023	WRITE ( io, 339 ) skip_time_data_output_av
	1024	ENDIF
	1025	ENDIF
	1026
	1027	ENDIF
	1028
	1029	ENDDO
	1030
	1031	!
[410]	1032	!-- masked arrays
	1033	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1034	mask_scale_x, mask_scale_y, mask_scale_z
	1035	DO mid = 1, masks
	1036	DO av = 0, 1
	1037
	1038	i = 1
	1039	domask_chr = ''
	1040	DO WHILE ( domask(mid,av,i) /= ' ' )
	1041	domask_chr = TRIM( domask_chr ) // ' ' // &
	1042	TRIM( domask(mid,av,i) ) // ','
	1043	i = i + 1
	1044	ENDDO
	1045
	1046	IF ( domask_chr /= '' ) THEN
	1047	IF ( av == 0 ) THEN
	1048	WRITE ( io, 346 ) '', mid
	1049	ELSE
	1050	WRITE ( io, 346 ) ' (time-averaged)', mid
	1051	ENDIF
	1052
	1053	output_format = ''
	1054	IF ( netcdf_output ) THEN
[493]	1055	IF ( netcdf_data_format == 1 ) THEN
	1056	output_format = 'NetCDF classic'
	1057	ELSEIF ( netcdf_data_format == 2 ) THEN
	1058	output_format = 'NetCDF 64bit offset'
	1059	ELSEIF ( netcdf_data_format == 3 ) THEN
	1060	output_format = 'NetCDF4/HDF5'
	1061	ELSEIF ( netcdf_data_format == 4 ) THEN
	1062	output_format = 'NetCDF4/HDF5 clasic'
	1063	ENDIF
[410]	1064	ENDIF
	1065	WRITE ( io, 344 ) output_format
	1066
	1067	IF ( av == 0 ) THEN
	1068	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1069	ELSE
	1070	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1071	averaging_interval, dt_averaging_input
	1072	ENDIF
	1073
	1074	IF ( av == 0 ) THEN
	1075	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1076	WRITE ( io, 339 ) skip_time_domask(mid)
	1077	ENDIF
	1078	ELSE
	1079	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1080	WRITE ( io, 339 ) skip_time_data_output_av
	1081	ENDIF
	1082	ENDIF
	1083	!
	1084	!-- output locations
	1085	DO dim = 1, 3
	1086	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1087	count = 0
	1088	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1089	count = count + 1
	1090	ENDDO
	1091	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1092	mask(mid,dim,:count)
	1093	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1094	mask_loop(mid,dim,2) < 0.0 .AND. &
	1095	mask_loop(mid,dim,3) == 0.0 ) THEN
	1096	WRITE ( io, 350 ) dir(dim), dir(dim)
	1097	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1098	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1099	mask_loop(mid,dim,1:2)
	1100	ELSE
	1101	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1102	mask_loop(mid,dim,1:3)
	1103	ENDIF
	1104	ENDDO
	1105	ENDIF
	1106
	1107	ENDDO
	1108	ENDDO
	1109
	1110	!
[1]	1111	!-- Timeseries
	1112	IF ( dt_dots /= 9999999.9 ) THEN
	1113	WRITE ( io, 340 )
	1114
	1115	output_format = ''
	1116	IF ( netcdf_output ) THEN
[493]	1117	IF ( netcdf_data_format == 1 ) THEN
	1118	output_format = 'NetCDF classic'
[1]	1119	ELSE
[493]	1120	output_format = 'NetCDF 64bit offset'
[1]	1121	ENDIF
	1122	ENDIF
	1123	IF ( profil_output ) THEN
	1124	IF ( netcdf_output ) THEN
	1125	output_format = TRIM( output_format ) // ' and profil'
	1126	ELSE
	1127	output_format = 'profil'
	1128	ENDIF
	1129	ENDIF
[292]	1130	WRITE ( io, 344 ) output_format
[1]	1131	WRITE ( io, 341 ) dt_dots
	1132	ENDIF
	1133
	1134	#if defined( __dvrp_graphics )
	1135	!
	1136	!-- Dvrp-output
	1137	IF ( dt_dvrp /= 9999999.9 ) THEN
	1138	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1139	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1140	i = 1
	1141	l = 0
[336]	1142	m = 0
[1]	1143	DO WHILE ( mode_dvrp(i) /= ' ' )
	1144	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1145	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1146	l = l + 1
	1147	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1148	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1149	isosurface_color(:,l)
[1]	1150	ENDIF
	1151	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1152	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1153	m = m + 1
	1154	IF ( do2d(0,j) /= ' ' ) THEN
	1155	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1156	slicer_range_limits_dvrp(:,m)
	1157	ENDIF
[1]	1158	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1159	WRITE ( io, 363 ) dvrp_psize
	1160	IF ( particle_dvrpsize /= 'none' ) THEN
	1161	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1162	dvrpsize_interval
	1163	ENDIF
	1164	IF ( particle_color /= 'none' ) THEN
	1165	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1166	color_interval
	1167	ENDIF
[1]	1168	ENDIF
	1169	i = i + 1
	1170	ENDDO
[237]	1171
[336]	1172	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1173	superelevation_y, superelevation, clip_dvrp_l, &
	1174	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1175
	1176	IF ( TRIM( topography ) /= 'flat' ) THEN
	1177	WRITE ( io, 366 ) topography_color
	1178	IF ( cluster_size > 1 ) THEN
	1179	WRITE ( io, 367 ) cluster_size
	1180	ENDIF
[237]	1181	ENDIF
	1182
[1]	1183	ENDIF
	1184	#endif
	1185
	1186	#if defined( __spectra )
	1187	!
	1188	!-- Spectra output
	1189	IF ( dt_dosp /= 9999999.9 ) THEN
	1190	WRITE ( io, 370 )
	1191
	1192	output_format = ''
	1193	IF ( netcdf_output ) THEN
[493]	1194	IF ( netcdf_data_format == 1 ) THEN
	1195	output_format = 'NetCDF classic'
[1]	1196	ELSE
[493]	1197	output_format = 'NetCDF 64bit offset'
[1]	1198	ENDIF
	1199	ENDIF
	1200	IF ( profil_output ) THEN
	1201	IF ( netcdf_output ) THEN
	1202	output_format = TRIM( output_format ) // ' and profil'
	1203	ELSE
	1204	output_format = 'profil'
	1205	ENDIF
	1206	ENDIF
[292]	1207	WRITE ( io, 344 ) output_format
[1]	1208	WRITE ( io, 371 ) dt_dosp
	1209	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1210	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1211	( spectra_direction(i), i = 1,10 ), &
[189]	1212	( comp_spectra_level(i), i = 1,100 ), &
	1213	( plot_spectra_level(i), i = 1,100 ), &
[1]	1214	averaging_interval_sp, dt_averaging_input_pr
	1215	ENDIF
	1216	#endif
	1217
	1218	WRITE ( io, 99 )
	1219
	1220	!
	1221	!-- Physical quantities
	1222	WRITE ( io, 400 )
	1223
	1224	!
	1225	!-- Geostrophic parameters
	1226	WRITE ( io, 410 ) omega, phi, f, fs
	1227
	1228	!
	1229	!-- Other quantities
	1230	WRITE ( io, 411 ) g
[97]	1231	IF ( use_reference ) THEN
	1232	IF ( ocean ) THEN
	1233	WRITE ( io, 412 ) prho_reference
	1234	ELSE
	1235	WRITE ( io, 413 ) pt_reference
	1236	ENDIF
	1237	ENDIF
[1]	1238
	1239	!
	1240	!-- Cloud physics parameters
	1241	IF ( cloud_physics ) THEN
[57]	1242	WRITE ( io, 415 )
	1243	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1244	ENDIF
	1245
	1246	!-- Profile of the geostrophic wind (component ug)
	1247	!-- Building output strings
	1248	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1249	gradients = '------'
	1250	slices = ' 0'
	1251	coordinates = ' 0.0'
	1252	i = 1
	1253	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1254
[167]	1255	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1256	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1257
[167]	1258	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1259	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1260
[167]	1261	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1262	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1263
[167]	1264	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1265	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1266
[430]	1267	IF ( i == 10 ) THEN
	1268	EXIT
	1269	ELSE
	1270	i = i + 1
	1271	ENDIF
	1272
[1]	1273	ENDDO
	1274
	1275	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1276	TRIM( gradients ), TRIM( slices )
	1277
	1278	!-- Profile of the geostrophic wind (component vg)
	1279	!-- Building output strings
	1280	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1281	gradients = '------'
	1282	slices = ' 0'
	1283	coordinates = ' 0.0'
	1284	i = 1
	1285	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1286
[167]	1287	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1288	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1289
[167]	1290	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1291	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1292
[167]	1293	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1294	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1295
[167]	1296	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1297	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1298
[430]	1299	IF ( i == 10 ) THEN
	1300	EXIT
	1301	ELSE
	1302	i = i + 1
	1303	ENDIF
	1304
[1]	1305	ENDDO
	1306
	1307	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1308	TRIM( gradients ), TRIM( slices )
	1309
	1310	!
	1311	!-- Initial temperature profile
	1312	!-- Building output strings, starting with surface temperature
	1313	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1314	gradients = '------'
	1315	slices = ' 0'
	1316	coordinates = ' 0.0'
	1317	i = 1
	1318	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1319
[94]	1320	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1321	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1322
[94]	1323	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1324	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1325
[94]	1326	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1327	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1328
[94]	1329	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1330	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1331
[430]	1332	IF ( i == 10 ) THEN
	1333	EXIT
	1334	ELSE
	1335	i = i + 1
	1336	ENDIF
	1337
[1]	1338	ENDDO
	1339
	1340	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1341	TRIM( gradients ), TRIM( slices )
	1342
	1343	!
	1344	!-- Initial humidity profile
	1345	!-- Building output strings, starting with surface humidity
[75]	1346	IF ( humidity .OR. passive_scalar ) THEN
[1]	1347	WRITE ( temperatures, '(E8.1)' ) q_surface
	1348	gradients = '--------'
	1349	slices = ' 0'
	1350	coordinates = ' 0.0'
	1351	i = 1
	1352	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1353
	1354	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1355	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1356
	1357	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1358	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1359
	1360	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1361	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1362
	1363	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1364	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1365
[430]	1366	IF ( i == 10 ) THEN
	1367	EXIT
	1368	ELSE
	1369	i = i + 1
	1370	ENDIF
	1371
[1]	1372	ENDDO
	1373
[75]	1374	IF ( humidity ) THEN
[1]	1375	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1376	TRIM( gradients ), TRIM( slices )
	1377	ELSE
	1378	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1379	TRIM( gradients ), TRIM( slices )
	1380	ENDIF
	1381	ENDIF
	1382
	1383	!
[97]	1384	!-- Initial salinity profile
	1385	!-- Building output strings, starting with surface salinity
	1386	IF ( ocean ) THEN
	1387	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1388	gradients = '------'
	1389	slices = ' 0'
	1390	coordinates = ' 0.0'
	1391	i = 1
	1392	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1393
	1394	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1395	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1396
	1397	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1398	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1399
	1400	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1401	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1402
	1403	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1404	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1405
[430]	1406	IF ( i == 10 ) THEN
	1407	EXIT
	1408	ELSE
	1409	i = i + 1
	1410	ENDIF
	1411
[97]	1412	ENDDO
	1413
	1414	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1415	TRIM( gradients ), TRIM( slices )
	1416	ENDIF
	1417
	1418	!
[411]	1419	!-- Profile for the large scale vertial velocity
	1420	!-- Building output strings, starting with surface value
	1421	IF ( large_scale_subsidence ) THEN
	1422	temperatures = ' 0.0'
	1423	gradients = '------'
	1424	slices = ' 0'
	1425	coordinates = ' 0.0'
	1426	i = 1
[580]	1427	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1428
	1429	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1430	w_subs(subs_vertical_gradient_level_i(i))
[411]	1431	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1432
[580]	1433	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1434	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1435
[580]	1436	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1437	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1438
[580]	1439	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1440	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1441
[430]	1442	IF ( i == 10 ) THEN
	1443	EXIT
	1444	ELSE
	1445	i = i + 1
	1446	ENDIF
	1447
[411]	1448	ENDDO
	1449
	1450	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1451	TRIM( gradients ), TRIM( slices )
	1452	ENDIF
	1453
	1454	!
[1]	1455	!-- LES / turbulence parameters
	1456	WRITE ( io, 450 )
	1457
	1458	!--
	1459	! ... LES-constants used must still be added here
	1460	!--
	1461	IF ( constant_diffusion ) THEN
	1462	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1463	prandtl_number
	1464	ENDIF
	1465	IF ( .NOT. constant_diffusion) THEN
[108]	1466	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1467	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1468	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1469	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1470	ENDIF
	1471
	1472	!
	1473	!-- Special actions during the run
	1474	WRITE ( io, 470 )
	1475	IF ( create_disturbances ) THEN
	1476	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1477	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1478	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1479	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1480	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1481	ELSE
	1482	WRITE ( io, 473 ) disturbance_energy_limit
	1483	ENDIF
	1484	WRITE ( io, 474 ) TRIM( random_generator )
	1485	ENDIF
	1486	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1487	WRITE ( io, 475 ) pt_surface_initial_change
	1488	ENDIF
[75]	1489	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1490	WRITE ( io, 476 ) q_surface_initial_change
	1491	ENDIF
	1492	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1493	WRITE ( io, 477 ) q_surface_initial_change
	1494	ENDIF
	1495
[60]	1496	IF ( particle_advection ) THEN
[1]	1497	!
[60]	1498	!-- Particle attributes
	1499	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1500	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1501	end_time_prel, dt_sort_particles
[60]	1502	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1503	IF ( random_start_position ) WRITE ( io, 481 )
	1504	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1505	WRITE ( io, 495 ) total_number_of_particles
	1506	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1507	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1508	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1509	WRITE ( io, 484 ) total_number_of_tails, &
	1510	minimum_tailpoint_distance, &
	1511	maximum_tailpoint_age
	1512	ENDIF
[1]	1513	ENDIF
[60]	1514	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1515	WRITE ( io, 485 ) dt_write_particle_data
	1516	output_format = ''
	1517	IF ( netcdf_output ) THEN
[493]	1518	IF ( netcdf_data_format > 1 ) THEN
[60]	1519	output_format = 'netcdf (64 bit offset) and binary'
	1520	ELSE
	1521	output_format = 'netcdf and binary'
	1522	ENDIF
[1]	1523	ELSE
[60]	1524	output_format = 'binary'
[1]	1525	ENDIF
[292]	1526	WRITE ( io, 344 ) output_format
[1]	1527	ENDIF
[60]	1528	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1529	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1530
[60]	1531	WRITE ( io, 487 ) number_of_particle_groups
[1]	1532
[60]	1533	DO i = 1, number_of_particle_groups
	1534	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1535	WRITE ( io, 490 ) i, 0.0
	1536	WRITE ( io, 492 )
[1]	1537	ELSE
[60]	1538	WRITE ( io, 490 ) i, radius(i)
	1539	IF ( density_ratio(i) /= 0.0 ) THEN
	1540	WRITE ( io, 491 ) density_ratio(i)
	1541	ELSE
	1542	WRITE ( io, 492 )
	1543	ENDIF
[1]	1544	ENDIF
[60]	1545	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1546	pdx(i), pdy(i), pdz(i)
[336]	1547	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1548	ENDDO
[1]	1549
[60]	1550	ENDIF
[1]	1551
[60]	1552
[1]	1553	!
	1554	!-- Parameters of 1D-model
	1555	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1556	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1557	mixing_length_1d, dissipation_1d
	1558	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1559	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1560	ENDIF
	1561	ENDIF
	1562
	1563	!
	1564	!-- User-defined informations
	1565	CALL user_header( io )
	1566
	1567	WRITE ( io, 99 )
	1568
	1569	!
	1570	!-- Write buffer contents to disc immediately
[82]	1571	CALL local_flush( io )
[1]	1572
	1573	!
	1574	!-- Here the FORMATs start
	1575
	1576	99 FORMAT (1X,78('-'))
[200]	1577	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1578	1X,'* ',A,' *',9X,A/ &
	1579	1X,'***************************',9X,42('-'))
[291]	1580	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1581	37X,42('-'))
[200]	1582	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1583	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1584	' Run on host: ',A10)
[1]	1585	#if defined( __parallel )
[200]	1586	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1587	')',1X,A)
[200]	1588	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1589	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1590	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1591	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1592	37X,'because the job is running on an SMP-cluster')
[102]	1593	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1594	#endif
	1595	110 FORMAT (/' Numerical Schemes:'/ &
	1596	' -----------------'/)
	1597	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1598	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1599	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1600	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1601	' or Upstream')
	1602	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1603	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1604	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1605	' or Upstream')
	1606	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1607	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1608	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1609	' Translation velocity = ',A/ &
	1610	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1611	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1612	' of timestep changes)')
	1613	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1614	' timestep changes')
	1615	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1616	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1617	' maximum damping coefficient: ',F5.3, ' 1/s')
	1618	124 FORMAT (' Spline-overshoots are being suppressed')
	1619	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1620	' of'/ &
	1621	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1622	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1623	' of'/ &
	1624	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1625	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1626	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1627	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1628	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1629	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1630	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1631	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1632	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1633	' effective emissivity scheme')
	1634	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1635	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1636	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1637	A,'-cycle)'/ &
	1638	' number of grid levels: ',I2/ &
	1639	' Gauss-Seidel red/black iterations: ',I2)
	1640	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1641	I3,')')
	1642	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1643	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1644	I3,')'/ &
	1645	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1646	I3,')')
	1647	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1648	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1649	140 FORMAT (' maximum residual allowed: ',E10.3)
	1650	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1651	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1652	'step')
[87]	1653	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1654	'kinetic energy')
[1]	1655	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1656	'conserved'/ &
	1657	' using the ',A,' mode')
	1658	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1659	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1660	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1661	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1662	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1663	'prognostic equation for')
	1664	154 FORMAT (' the potential temperature')
[1]	1665	200 FORMAT (//' Run time and time step information:'/ &
	1666	' ----------------------------------'/)
	1667	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1668	' CFL-factor: ',F4.2)
	1669	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1670	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1671	' End time: ',F9.3,' s')
	1672	204 FORMAT ( A,F9.3,' s')
	1673	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1674	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1675	' CPU-time used: ',F9.3,' s per timestep: ', &
	1676	' ',F9.3,' s'/ &
	1677	' per second of simulated tim', &
	1678	'e: ',F9.3,' s')
[291]	1679	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1680	250 FORMAT (//' Computational grid and domain size:'/ &
	1681	' ----------------------------------'// &
	1682	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1683	' m dz = ',F7.3,' m'/ &
	1684	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1685	' m z(u) = ',F10.3,' m'/)
	1686	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1687	' factor: ',F5.3/ &
	1688	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1689	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1690	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1691	255 FORMAT (' Subdomains have equal size')
	1692	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1693	'have smaller sizes'/ &
	1694	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1695	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1696	' degrees')
	1697	270 FORMAT (//' Topography informations:'/ &
	1698	' -----------------------'// &
	1699	1X,'Topography: ',A)
	1700	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1701	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1702	' / ',I4)
[240]	1703	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1704	' direction' / &
	1705	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1706	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1707	278 FORMAT (' Topography grid definition convention:'/ &
	1708	' cell edge (staggered grid points'/ &
	1709	' (u in x-direction, v in y-direction))' /)
	1710	279 FORMAT (' Topography grid definition convention:'/ &
	1711	' cell center (scalar grid points)' /)
[138]	1712	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1713	' ------------------------------'// &
	1714	' Canopy mode: ', A / &
	1715	' Canopy top: ',I4 / &
	1716	' Leaf drag coefficient: ',F6.2 /)
[153]	1717	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1718	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1719	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1720	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1721	' Height: ',A,' m'/ &
	1722	' Leaf area density: ',A,' m2/m3'/ &
	1723	' Gradient: ',A,' m2/m4'/ &
	1724	' Gridpoint: ',A)
	1725
[1]	1726	300 FORMAT (//' Boundary conditions:'/ &
	1727	' -------------------'// &
	1728	' p uv ', &
	1729	' pt'// &
	1730	' B. bound.: ',A/ &
	1731	' T. bound.: ',A)
[97]	1732	301 FORMAT (/' ',A// &
[1]	1733	' B. bound.: ',A/ &
	1734	' T. bound.: ',A)
[19]	1735	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1736	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1737	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1738	'computational u,v-level:'// &
[1]	1739	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1740	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1741	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1742	307 FORMAT (' Heatflux has a random normal distribution')
	1743	308 FORMAT (' Predefined surface temperature')
[97]	1744	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1745	310 FORMAT (//' 1D-Model:'// &
	1746	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1747	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1748	312 FORMAT (' Predefined surface humidity')
	1749	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1750	314 FORMAT (' Predefined scalar value at the surface')
[19]	1751	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1752	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1753	'atmosphere model')
[1]	1754	317 FORMAT (//' Lateral boundaries:'/ &
	1755	' left/right: ',A/ &
	1756	' north/south: ',A)
	1757	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1758	'max =',F5.1,' m**2/s')
[151]	1759	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1760	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1761	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1762	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1763	' v: ',F9.6,' m2/s2')
[151]	1764	325 FORMAT (//' List output:'/ &
[1]	1765	' -----------'// &
	1766	' 1D-Profiles:'/ &
	1767	' Output every ',F8.2,' s')
[151]	1768	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1769	' Averaging input every ',F8.2,' s')
	1770	330 FORMAT (//' Data output:'/ &
	1771	' -----------'/)
	1772	331 FORMAT (/' 1D-Profiles:')
	1773	332 FORMAT (/' ',A)
	1774	333 FORMAT (' Output every ',F8.2,' s',/ &
	1775	' Time averaged over ',F8.2,' s'/ &
	1776	' Averaging input every ',F8.2,' s')
	1777	334 FORMAT (/' 2D-Arrays',A,':')
	1778	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1779	' Output every ',F8.2,' s ',A/ &
	1780	' Cross sections at ',A1,' = ',A/ &
	1781	' scalar-coordinates: ',A,' m'/)
	1782	336 FORMAT (/' 3D-Arrays',A,':')
	1783	337 FORMAT (/' Arrays: ',A/ &
	1784	' Output every ',F8.2,' s ',A/ &
	1785	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1786	338 FORMAT (' Compressed data output'/ &
	1787	' Decimal precision: ',A/)
	1788	339 FORMAT (' No output during initial ',F8.2,' s')
	1789	340 FORMAT (/' Time series:')
	1790	341 FORMAT (' Output every ',F8.2,' s'/)
	1791	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1792	' Output every ',F8.2,' s ',A/ &
	1793	' Time averaged over ',F8.2,' s'/ &
	1794	' Averaging input every ',F8.2,' s'/ &
	1795	' Cross sections at ',A1,' = ',A/ &
	1796	' scalar-coordinates: ',A,' m'/)
	1797	343 FORMAT (/' Arrays: ',A/ &
	1798	' Output every ',F8.2,' s ',A/ &
	1799	' Time averaged over ',F8.2,' s'/ &
	1800	' Averaging input every ',F8.2,' s'/ &
	1801	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1802	344 FORMAT (' Output format: ',A/)
[410]	1803	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1804	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1805	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1806	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1807	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1808	347 FORMAT (' Variables: ',A/ &
	1809	' Output every ',F8.2,' s')
	1810	348 FORMAT (' Variables: ',A/ &
	1811	' Output every ',F8.2,' s'/ &
	1812	' Time averaged over ',F8.2,' s'/ &
	1813	' Averaging input every ',F8.2,' s')
	1814	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1815	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1816	13(' ',8(F8.2,',')/) )
	1817	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1818	'all gridpoints along ',A,'-direction (default).' )
	1819	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1820	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1821	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1822	#if defined( __dvrp_graphics )
	1823	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1824	' Output every ',F7.1,' s'/ &
	1825	' Output mode: ',A/ &
	1826	' Host / User: ',A,' / ',A/ &
	1827	' Directory: ',A// &
	1828	' The sequence contains:')
[337]	1829	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1830	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1831	362 FORMAT (/' Slicer plane ',A/ &
[336]	1832	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1833	363 FORMAT (/' Particles'/ &
[336]	1834	' particle size: ',F7.2,' m')
	1835	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1836	F6.2,',',F6.2,']')
[337]	1837	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1838	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1839	')'/ &
	1840	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1841	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1842	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1843	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1844	#endif
	1845	#if defined( __spectra )
	1846	370 FORMAT (' Spectra:')
	1847	371 FORMAT (' Output every ',F7.1,' s'/)
	1848	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1849	' Directions: ', 10(A5,',')/ &
[189]	1850	' height levels k = ', 20(I3,',')/ &
	1851	' ', 20(I3,',')/ &
	1852	' ', 20(I3,',')/ &
	1853	' ', 20(I3,',')/ &
	1854	' ', 19(I3,','),I3,'.'/ &
[1]	1855	' height levels selected for standard plot:'/ &
[189]	1856	' k = ', 20(I3,',')/ &
	1857	' ', 20(I3,',')/ &
	1858	' ', 20(I3,',')/ &
	1859	' ', 20(I3,',')/ &
	1860	' ', 19(I3,','),I3,'.'/ &
[1]	1861	' Time averaged over ', F7.1, ' s,' / &
	1862	' Profiles for the time averaging are taken every ', &
	1863	F6.1,' s')
	1864	#endif
	1865	400 FORMAT (//' Physical quantities:'/ &
	1866	' -------------------'/)
	1867	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1868	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1869	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1870	' f* = ',F9.6,' 1/s')
	1871	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1872	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1873	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1874	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1875	' ------------------------'/)
[57]	1876	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1877	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1878	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1879	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1880	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1881	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1882	' Height: ',A,' m'/ &
	1883	' Temperature: ',A,' K'/ &
	1884	' Gradient: ',A,' K/100m'/ &
	1885	' Gridpoint: ',A)
	1886	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1887	' Height: ',A,' m'/ &
	1888	' Humidity: ',A,' kg/kg'/ &
	1889	' Gradient: ',A,' (kg/kg)/100m'/ &
	1890	' Gridpoint: ',A)
	1891	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1892	' Height: ',A,' m'/ &
	1893	' Scalar concentration: ',A,' kg/m**3'/ &
	1894	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1895	' Gridpoint: ',A)
	1896	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1897	' Height: ',A,' m'/ &
	1898	' ug: ',A,' m/s'/ &
	1899	' Gradient: ',A,' 1/100s'/ &
	1900	' Gridpoint: ',A)
	1901	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1902	' Height: ',A,' m'/ &
[97]	1903	' vg: ',A,' m/s'/ &
[1]	1904	' Gradient: ',A,' 1/100s'/ &
	1905	' Gridpoint: ',A)
[97]	1906	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1907	' Height: ',A,' m'/ &
	1908	' Salinity: ',A,' psu'/ &
	1909	' Gradient: ',A,' psu/100m'/ &
	1910	' Gridpoint: ',A)
[411]	1911	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1912	' Height: ',A,' m'/ &
	1913	' w_subs: ',A,' m/s'/ &
	1914	' Gradient: ',A,' (m/s)/100m'/ &
	1915	' Gridpoint: ',A)
[1]	1916	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1917	' ---------------------------'/)
	1918	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1919	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1920	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1921	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1922	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1923	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1924	470 FORMAT (//' Actions during the simulation:'/ &
	1925	' -----------------------------'/)
[94]	1926	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1927	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1928	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1929	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1930	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1931	' to i/j =',I4)
	1932	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1933	1X,F5.3, ' m2/s2')
	1934	474 FORMAT (' Random number generator used : ',A/)
	1935	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1936	'respectively, if'/ &
	1937	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1938	' 3D-simulation'/)
	1939	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1940	'respectively, if the'/ &
	1941	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1942	' the 3D-simulation'/)
	1943	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1944	'respectively, if the'/ &
	1945	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1946	' the 3D-simulation'/)
	1947	480 FORMAT (' Particles:'/ &
	1948	' ---------'// &
	1949	' Particle advection is active (switched on at t = ', F7.1, &
	1950	' s)'/ &
	1951	' Start of new particle generations every ',F6.1,' s'/ &
	1952	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1953	' bottom: ', A, ' top: ', A/&
	1954	' Maximum particle age: ',F9.1,' s'/ &
[117]	1955	' Advection stopped at t = ',F9.1,' s'/ &
	1956	' Particles are sorted every ',F9.1,' s'/)
[1]	1957	481 FORMAT (' Particles have random start positions'/)
[336]	1958	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1959	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1960	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1961	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1962	' Maximum age of the end of the tail: ',F8.2,' s')
	1963	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1964	486 FORMAT (' Particle statistics are written on file'/)
	1965	487 FORMAT (' Number of particle groups: ',I2/)
	1966	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1967	' minimum timestep for advection: ', F7.5/)
	1968	489 FORMAT (' Number of particles simultaneously released at each ', &
	1969	'point: ', I5/)
	1970	490 FORMAT (' Particle group ',I2,':'/ &
	1971	' Particle radius: ',E10.3, 'm')
	1972	491 FORMAT (' Particle inertia is activated'/ &
	1973	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1974	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1975	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1976	' y:',F8.1,' - ',F8.1,' m'/&
	1977	' z:',F8.1,' - ',F8.1,' m'/&
	1978	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1979	' m dz = ',F8.1,' m'/)
	1980	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1981	F8.2,' s'/)
	1982	495 FORMAT (' Number of particles in total domain: ',I10/)
	1983	500 FORMAT (//' 1D-Model parameters:'/ &
	1984	' -------------------'// &
	1985	' Simulation time: ',F8.1,' s'/ &
	1986	' Run-controll output every: ',F8.1,' s'/ &
	1987	' Vertical profile output every: ',F8.1,' s'/ &
	1988	' Mixing length calculation: ',A/ &
	1989	' Dissipation calculation: ',A/)
	1990	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1991	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1992	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[1]	1993
	1994
	1995	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |