Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 585

Last change on this file since 585 was 581, checked in by heinze, 14 years ago
last commit documented
Property svn:keywords set to `Id`
File size: 76.5 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[581]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 581 2010-10-05 14:22:12Z heinze $
	11	!
[581]	12	! 580 2010-10-05 13:59:11Z heinze
	13	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	14	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	15	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
	16	!
[494]	17	! 493 2010-03-01 08:30:24Z raasch
	18	! NetCDF data output format extendend for NetCDF4/HDF5
	19	!
[482]	20	! 449 2010-02-02 11:23:59Z raasch
	21	! +large scale vertical motion (subsidence/ascent)
	22	! Bugfix: index problem concerning gradient_level indices removed
	23	!
[449]	24	! 410 2009-12-04 17:05:40Z letzel
	25	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	26	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	27	!
[392]	28	! 346 2009-07-06 10:13:41Z raasch
[328]	29	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	30	! Coupling with independent precursor runs.
[254]	31	! Output of messages replaced by message handling routine.
[336]	32	! Output of several additional dvr parameters
[240]	33	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	34	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	35	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	36	! topography_grid_convention moved from user_header
[292]	37	! small bugfix concerning 3d 64bit netcdf output format
[1]	38	!
[226]	39	! 206 2008-10-13 14:59:11Z raasch
	40	! Bugfix: error in zu index in case of section_xy = -1
	41	!
[200]	42	! 198 2008-09-17 08:55:28Z raasch
	43	! Format adjustments allowing output of larger revision numbers
	44	!
[198]	45	! 197 2008-09-16 15:29:03Z raasch
	46	! allow 100 spectra levels instead of 10 for consistency with
	47	! define_netcdf_header,
	48	! bugfix in the output of the characteristic levels of potential temperature,
	49	! geostrophic wind, scalar concentration, humidity and leaf area density,
	50	! output of turbulence recycling informations
	51	!
[139]	52	! 138 2007-11-28 10:03:58Z letzel
	53	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	54	! Allow two instead of one digit to specify isosurface and slicer variables.
	55	! Output of sorting frequency of particles
	56	!
[110]	57	! 108 2007-08-24 15:10:38Z letzel
	58	! Output of informations for coupled model runs (boundary conditions etc.)
	59	! + output of momentumfluxes at the top boundary
	60	! Rayleigh damping for ocean, e_init
	61	!
[98]	62	! 97 2007-06-21 08:23:15Z raasch
	63	! Adjustments for the ocean version.
	64	! use_pt_reference renamed use_reference
	65	!
[90]	66	! 87 2007-05-22 15:46:47Z raasch
	67	! Bugfix: output of use_upstream_for_tke
	68	!
[83]	69	! 82 2007-04-16 15:40:52Z raasch
	70	! Preprocessor strings for different linux clusters changed to "lc",
	71	! routine local_flush is used for buffer flushing
	72	!
[77]	73	! 76 2007-03-29 00:58:32Z raasch
	74	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	75	! output of the loop optimization method, moisture renamed humidity,
	76	! output of subversion revision number
	77	!
[39]	78	! 19 2007-02-23 04:53:48Z raasch
	79	! Output of scalar flux applied at top boundary
	80	!
[3]	81	! RCS Log replace by Id keyword, revision history cleaned up
	82	!
[1]	83	! Revision 1.63 2006/08/22 13:53:13 raasch
	84	! Output of dz_max
	85	!
	86	! Revision 1.1 1997/08/11 06:17:20 raasch
	87	! Initial revision
	88	!
	89	!
	90	! Description:
	91	! ------------
	92	! Writing a header with all important informations about the actual run.
	93	! This subroutine is called three times, two times at the beginning
	94	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	95	! end of the run, then writing additional information about CPU-usage on file
	96	! header.
[411]	97	!-----------------------------------------------------------------------------!
[1]	98
	99	USE arrays_3d
	100	USE control_parameters
	101	USE cloud_parameters
	102	USE cpulog
	103	USE dvrp_variables
	104	USE grid_variables
	105	USE indices
	106	USE model_1d
	107	USE particle_attributes
	108	USE pegrid
[411]	109	USE subsidence_mod
[1]	110	USE spectrum
	111
	112	IMPLICIT NONE
	113
	114	CHARACTER (LEN=1) :: prec
	115	CHARACTER (LEN=2) :: do2d_mode
	116	CHARACTER (LEN=5) :: section_chr
	117	CHARACTER (LEN=9) :: time_to_string
	118	CHARACTER (LEN=10) :: coor_chr, host_chr
	119	CHARACTER (LEN=16) :: begin_chr
[200]	120	CHARACTER (LEN=23) :: ver_rev
[1]	121	CHARACTER (LEN=40) :: output_format
[167]	122	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	123	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	124	domask_chr, run_classification
[167]	125	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	126	temperatures, ugcomponent, vgcomponent
[1]	127	CHARACTER (LEN=85) :: roben, runten
	128
[410]	129	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	130
	131	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	132	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	133	REAL :: cpuseconds_per_simulated_second
	134
	135	!
	136	!-- Open the output file. At the end of the simulation, output is directed
	137	!-- to unit 19.
	138	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	139	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	140	io = 15 ! header output on file RUN_CONTROL
	141	ELSE
	142	io = 19 ! header output on file HEADER
	143	ENDIF
	144	CALL check_open( io )
	145
	146	!
	147	!-- At the end of the run, output file (HEADER) will be rewritten with
	148	!-- new informations
	149	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	150
	151	!
	152	!-- Determine kind of model run
	153	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	154	run_classification = '3D - restart run'
[328]	155	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	156	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	157	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	158	run_classification = '3D - run without 1D - prerun'
[197]	159	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	160	run_classification = '3D - run with 1D - prerun'
[197]	161	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	162	run_classification = '3D - run initialized by user'
[1]	163	ELSE
[254]	164	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	165	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	166	ENDIF
[97]	167	IF ( ocean ) THEN
	168	run_classification = 'ocean - ' // run_classification
	169	ELSE
	170	run_classification = 'atmosphere - ' // run_classification
	171	ENDIF
[1]	172
	173	!
	174	!-- Run-identification, date, time, host
	175	host_chr = host(1:10)
[75]	176	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	177	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	178	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	179	#if defined( __mpi2 )
	180	mpi_type = 2
	181	#else
	182	mpi_type = 1
	183	#endif
	184	WRITE ( io, 101 ) mpi_type, coupling_mode
	185	ENDIF
[102]	186	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	187	ADJUSTR( host_chr )
[1]	188	#if defined( __parallel )
	189	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	190	char1 = 'calculated'
	191	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	192	host(1:2) == 'lc' ) .AND. &
	193	npex == -1 .AND. pdims(2) == 1 ) THEN
	194	char1 = 'forced'
	195	ELSE
	196	char1 = 'predefined'
	197	ENDIF
	198	IF ( threads_per_task == 1 ) THEN
[102]	199	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	200	ELSE
[102]	201	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	202	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	203	ENDIF
	204	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	205	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	206	npex == -1 .AND. pdims(2) == 1 ) &
	207	THEN
[102]	208	WRITE ( io, 106 )
[1]	209	ELSEIF ( pdims(2) == 1 ) THEN
[102]	210	WRITE ( io, 107 ) 'x'
[1]	211	ELSEIF ( pdims(1) == 1 ) THEN
[102]	212	WRITE ( io, 107 ) 'y'
[1]	213	ENDIF
[102]	214	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	215	#endif
	216	WRITE ( io, 99 )
	217
	218	!
	219	!-- Numerical schemes
	220	WRITE ( io, 110 )
	221	IF ( psolver(1:7) == 'poisfft' ) THEN
	222	WRITE ( io, 111 ) TRIM( fft_method )
	223	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	224	ELSEIF ( psolver == 'sor' ) THEN
	225	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	226	ELSEIF ( psolver == 'multigrid' ) THEN
	227	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	228	IF ( mg_cycles == -1 ) THEN
	229	WRITE ( io, 140 ) residual_limit
	230	ELSE
	231	WRITE ( io, 141 ) mg_cycles
	232	ENDIF
	233	IF ( mg_switch_to_pe0_level == 0 ) THEN
	234	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	235	nzt_mg(1)
[197]	236	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	237	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	238	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	239	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	240	nzt_mg(mg_switch_to_pe0_level), &
	241	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	242	nzt_mg(1)
	243	ENDIF
	244	ENDIF
	245	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	246	THEN
	247	WRITE ( io, 142 )
	248	ENDIF
	249
	250	IF ( momentum_advec == 'pw-scheme' ) THEN
	251	WRITE ( io, 113 )
	252	ELSE
	253	WRITE ( io, 114 )
	254	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	255	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	256	overshoot_limit_w /= 0.0 ) THEN
	257	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	258	overshoot_limit_w
	259	ENDIF
	260	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	261	ups_limit_w /= 0.0 ) &
	262	THEN
	263	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	264	ENDIF
	265	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	266	ENDIF
	267	IF ( scalar_advec == 'pw-scheme' ) THEN
	268	WRITE ( io, 116 )
	269	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	270	WRITE ( io, 117 )
	271	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	272	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	273	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	274	ENDIF
	275	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	276	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	277	ENDIF
	278	ELSE
	279	WRITE ( io, 118 )
	280	ENDIF
[63]	281
	282	WRITE ( io, 139 ) TRIM( loop_optimization )
	283
[1]	284	IF ( galilei_transformation ) THEN
	285	IF ( use_ug_for_galilei_tr ) THEN
	286	char1 = 'geostrophic wind'
	287	ELSE
	288	char1 = 'mean wind in model domain'
	289	ENDIF
	290	IF ( simulated_time_at_begin == simulated_time ) THEN
	291	char2 = 'at the start of the run'
	292	ELSE
	293	char2 = 'at the end of the run'
	294	ENDIF
	295	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	296	advected_distance_x/1000.0, advected_distance_y/1000.0
	297	ENDIF
	298	IF ( timestep_scheme == 'leapfrog' ) THEN
	299	WRITE ( io, 120 )
	300	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	301	WRITE ( io, 121 )
	302	ELSE
	303	WRITE ( io, 122 ) timestep_scheme
	304	ENDIF
[87]	305	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	306	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	307	IF ( .NOT. ocean ) THEN
	308	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	309	rayleigh_damping_factor
	310	ELSE
	311	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	312	rayleigh_damping_factor
	313	ENDIF
[1]	314	ENDIF
[75]	315	IF ( humidity ) THEN
[1]	316	IF ( .NOT. cloud_physics ) THEN
	317	WRITE ( io, 129 )
	318	ELSE
	319	WRITE ( io, 130 )
	320	WRITE ( io, 131 )
	321	IF ( radiation ) WRITE ( io, 132 )
	322	IF ( precipitation ) WRITE ( io, 133 )
	323	ENDIF
	324	ENDIF
	325	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	326	IF ( conserve_volume_flow ) THEN
[241]	327	WRITE ( io, 150 ) conserve_volume_flow_mode
	328	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	329	WRITE ( io, 151 ) u_bulk, v_bulk
	330	ENDIF
[240]	331	ELSEIF ( dp_external ) THEN
	332	IF ( dp_smooth ) THEN
[241]	333	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	334	ELSE
[241]	335	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	336	ENDIF
	337	ENDIF
[411]	338	IF ( large_scale_subsidence ) THEN
	339	WRITE ( io, 153 )
	340	WRITE ( io, 154 )
	341	ENDIF
[1]	342	WRITE ( io, 99 )
	343
	344	!
	345	!-- Runtime and timestep informations
	346	WRITE ( io, 200 )
	347	IF ( .NOT. dt_fixed ) THEN
	348	WRITE ( io, 201 ) dt_max, cfl_factor
	349	ELSE
	350	WRITE ( io, 202 ) dt
	351	ENDIF
	352	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	353
	354	IF ( time_restart /= 9999999.9 .AND. &
	355	simulated_time_at_begin == simulated_time ) THEN
	356	IF ( dt_restart == 9999999.9 ) THEN
	357	WRITE ( io, 204 ) ' Restart at: ',time_restart
	358	ELSE
	359	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	360	ENDIF
	361	ENDIF
	362
	363	IF ( simulated_time_at_begin /= simulated_time ) THEN
	364	i = MAX ( log_point_s(10)%counts, 1 )
	365	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	366	cpuseconds_per_simulated_second = 0.0
	367	ELSE
	368	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	369	( simulated_time - &
	370	simulated_time_at_begin )
	371	ENDIF
	372	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	373	log_point_s(10)%sum / REAL( i ), &
	374	cpuseconds_per_simulated_second
	375	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	376	IF ( dt_restart == 9999999.9 ) THEN
	377	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	378	ELSE
	379	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	380	ENDIF
	381	ENDIF
	382	ENDIF
	383
	384	!
[291]	385	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	386	!-- and ocean are used. In this case, coupling_start_time defines the time
	387	!-- when the coupling is switched on.
	388	IF ( coupling_start_time /= 0.0 ) THEN
	389	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	390	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	391	ELSE
	392	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	393	'precursor runs'
	394	ENDIF
	395	WRITE ( io, 207 ) char1, coupling_start_time
	396	ENDIF
	397
	398	!
[1]	399	!-- Computational grid
[94]	400	IF ( .NOT. ocean ) THEN
	401	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	402	IF ( dz_stretch_level_index < nzt+1 ) THEN
	403	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	404	dz_stretch_factor, dz_max
	405	ENDIF
	406	ELSE
	407	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	408	IF ( dz_stretch_level_index > 0 ) THEN
	409	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	410	dz_stretch_factor, dz_max
	411	ENDIF
[1]	412	ENDIF
	413	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	414	MIN( nnz+2, nzt+2 )
[76]	415	IF ( numprocs > 1 ) THEN
	416	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	417	WRITE ( io, 255 )
	418	ELSE
	419	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	420	ENDIF
[1]	421	ENDIF
	422	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	423
	424	!
	425	!-- Topography
	426	WRITE ( io, 270 ) topography
	427	SELECT CASE ( TRIM( topography ) )
	428
	429	CASE ( 'flat' )
	430	! no actions necessary
	431
	432	CASE ( 'single_building' )
	433	blx = INT( building_length_x / dx )
	434	bly = INT( building_length_y / dy )
	435	bh = INT( building_height / dz )
	436
	437	IF ( building_wall_left == 9999999.9 ) THEN
	438	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	439	ENDIF
	440	bxl = INT ( building_wall_left / dx + 0.5 )
	441	bxr = bxl + blx
	442
	443	IF ( building_wall_south == 9999999.9 ) THEN
	444	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	445	ENDIF
	446	bys = INT ( building_wall_south / dy + 0.5 )
	447	byn = bys + bly
	448
	449	WRITE ( io, 271 ) building_length_x, building_length_y, &
	450	building_height, bxl, bxr, bys, byn
	451
[240]	452	CASE ( 'single_street_canyon' )
	453	ch = NINT( canyon_height / dz )
	454	IF ( canyon_width_x /= 9999999.9 ) THEN
	455	!
	456	!-- Street canyon in y direction
	457	cwx = NINT( canyon_width_x / dx )
	458	IF ( canyon_wall_left == 9999999.9 ) THEN
	459	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	460	ENDIF
	461	cxl = NINT( canyon_wall_left / dx )
	462	cxr = cxl + cwx
	463	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	464
	465	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	466	!
	467	!-- Street canyon in x direction
	468	cwy = NINT( canyon_width_y / dy )
	469	IF ( canyon_wall_south == 9999999.9 ) THEN
	470	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	471	ENDIF
	472	cys = NINT( canyon_wall_south / dy )
	473	cyn = cys + cwy
	474	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	475	ENDIF
	476
[1]	477	END SELECT
	478
[256]	479	IF ( TRIM( topography ) /= 'flat' ) THEN
	480	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	481	IF ( TRIM( topography ) == 'single_building' .OR. &
	482	TRIM( topography ) == 'single_street_canyon' ) THEN
	483	WRITE ( io, 278 )
	484	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	485	WRITE ( io, 279 )
	486	ENDIF
	487	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	488	WRITE ( io, 278 )
	489	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	490	WRITE ( io, 279 )
	491	ENDIF
	492	ENDIF
	493
[138]	494	IF ( plant_canopy ) THEN
	495
	496	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	497	IF ( passive_scalar ) THEN
	498	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	499	leaf_surface_concentration
	500	ENDIF
[138]	501
[1]	502	!
[153]	503	!-- Heat flux at the top of vegetation
	504	WRITE ( io, 282 ) cthf
	505
	506	!
[138]	507	!-- Leaf area density profile
	508	!-- Building output strings, starting with surface value
	509	WRITE ( learde, '(F6.2)' ) lad_surface
	510	gradients = '------'
	511	slices = ' 0'
	512	coordinates = ' 0.0'
	513	i = 1
	514	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	515
	516	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	517	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	518
	519	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	520	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	521
	522	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	523	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	524
	525	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	526	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	527
	528	i = i + 1
	529	ENDDO
	530
[153]	531	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	532	TRIM( gradients ), TRIM( slices )
	533
	534	ENDIF
	535
	536	!
[1]	537	!-- Boundary conditions
	538	IF ( ibc_p_b == 0 ) THEN
	539	runten = 'p(0) = 0 \|'
	540	ELSEIF ( ibc_p_b == 1 ) THEN
	541	runten = 'p(0) = p(1) \|'
	542	ELSE
	543	runten = 'p(0) = p(1) +R\|'
	544	ENDIF
	545	IF ( ibc_p_t == 0 ) THEN
	546	roben = 'p(nzt+1) = 0 \|'
	547	ELSE
	548	roben = 'p(nzt+1) = p(nzt) \|'
	549	ENDIF
	550
	551	IF ( ibc_uv_b == 0 ) THEN
	552	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	553	ELSE
	554	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	555	ENDIF
[132]	556	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	557	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	558	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	559	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	560	ELSE
	561	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	562	ENDIF
	563
	564	IF ( ibc_pt_b == 0 ) THEN
	565	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	566	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	567	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	568	ELSEIF ( ibc_pt_b == 2 ) THEN
	569	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	570	ENDIF
	571	IF ( ibc_pt_t == 0 ) THEN
[19]	572	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	573	ELSEIF( ibc_pt_t == 1 ) THEN
	574	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	575	ELSEIF( ibc_pt_t == 2 ) THEN
	576	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	577	ENDIF
	578
	579	WRITE ( io, 300 ) runten, roben
	580
	581	IF ( .NOT. constant_diffusion ) THEN
	582	IF ( ibc_e_b == 1 ) THEN
	583	runten = 'e(0) = e(1)'
	584	ELSE
	585	runten = 'e(0) = e(1) = (u/0.1)*2'
	586	ENDIF
	587	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	588
[97]	589	WRITE ( io, 301 ) 'e', runten, roben
[1]	590
	591	ENDIF
	592
[97]	593	IF ( ocean ) THEN
	594	runten = 'sa(0) = sa(1)'
	595	IF ( ibc_sa_t == 0 ) THEN
	596	roben = 'sa(nzt+1) = sa_surface'
[1]	597	ELSE
[97]	598	roben = 'sa(nzt+1) = sa(nzt)'
[1]	599	ENDIF
[97]	600	WRITE ( io, 301 ) 'sa', runten, roben
	601	ENDIF
[1]	602
[97]	603	IF ( humidity ) THEN
	604	IF ( ibc_q_b == 0 ) THEN
	605	runten = 'q(0) = q_surface'
	606	ELSE
	607	runten = 'q(0) = q(1)'
	608	ENDIF
	609	IF ( ibc_q_t == 0 ) THEN
	610	roben = 'q(nzt) = q_top'
	611	ELSE
	612	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	613	ENDIF
	614	WRITE ( io, 301 ) 'q', runten, roben
	615	ENDIF
[1]	616
[97]	617	IF ( passive_scalar ) THEN
	618	IF ( ibc_q_b == 0 ) THEN
	619	runten = 's(0) = s_surface'
	620	ELSE
	621	runten = 's(0) = s(1)'
	622	ENDIF
	623	IF ( ibc_q_t == 0 ) THEN
	624	roben = 's(nzt) = s_top'
	625	ELSE
	626	roben = 's(nzt) = s(nzt-1) + ds/dz'
	627	ENDIF
	628	WRITE ( io, 301 ) 's', runten, roben
[1]	629	ENDIF
	630
	631	IF ( use_surface_fluxes ) THEN
	632	WRITE ( io, 303 )
	633	IF ( constant_heatflux ) THEN
	634	WRITE ( io, 306 ) surface_heatflux
	635	IF ( random_heatflux ) WRITE ( io, 307 )
	636	ENDIF
[75]	637	IF ( humidity .AND. constant_waterflux ) THEN
[1]	638	WRITE ( io, 311 ) surface_waterflux
	639	ENDIF
	640	IF ( passive_scalar .AND. constant_waterflux ) THEN
	641	WRITE ( io, 313 ) surface_waterflux
	642	ENDIF
	643	ENDIF
	644
[19]	645	IF ( use_top_fluxes ) THEN
	646	WRITE ( io, 304 )
[102]	647	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	648	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	649	IF ( constant_top_heatflux ) THEN
	650	WRITE ( io, 306 ) top_heatflux
	651	ENDIF
	652	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	653	WRITE ( io, 316 )
[19]	654	ENDIF
[97]	655	IF ( ocean .AND. constant_top_salinityflux ) THEN
	656	WRITE ( io, 309 ) top_salinityflux
	657	ENDIF
[75]	658	IF ( humidity .OR. passive_scalar ) THEN
[19]	659	WRITE ( io, 315 )
	660	ENDIF
	661	ENDIF
	662
[1]	663	IF ( prandtl_layer ) THEN
[94]	664	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	665	rif_min, rif_max
[1]	666	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	667	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	668	WRITE ( io, 312 )
	669	ENDIF
	670	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	671	WRITE ( io, 314 )
	672	ENDIF
	673	ELSE
	674	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	675	WRITE ( io, 310 ) rif_min, rif_max
	676	ENDIF
	677	ENDIF
	678
	679	WRITE ( io, 317 ) bc_lr, bc_ns
	680	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	681	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	682	IF ( turbulent_inflow ) THEN
	683	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	684	inflow_damping_height, inflow_damping_width
	685	ENDIF
[1]	686	ENDIF
	687
	688	!
	689	!-- Listing of 1D-profiles
[151]	690	WRITE ( io, 325 ) dt_dopr_listing
[1]	691	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	692	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	693	ENDIF
	694
	695	!
	696	!-- DATA output
	697	WRITE ( io, 330 )
	698	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	699	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	700	ENDIF
	701
	702	!
	703	!-- 1D-profiles
[346]	704	dopr_chr = 'Profile:'
[1]	705	IF ( dopr_n /= 0 ) THEN
	706	WRITE ( io, 331 )
	707
	708	output_format = ''
	709	IF ( netcdf_output ) THEN
[493]	710	IF ( netcdf_data_format == 1 ) THEN
	711	output_format = 'NetCDF classic'
[1]	712	ELSE
[493]	713	output_format = 'NetCDF 64bit offset'
[1]	714	ENDIF
	715	ENDIF
	716	IF ( profil_output ) THEN
	717	IF ( netcdf_output ) THEN
	718	output_format = TRIM( output_format ) // ' and profil'
	719	ELSE
	720	output_format = 'profil'
	721	ENDIF
	722	ENDIF
[292]	723	WRITE ( io, 344 ) output_format
[1]	724
	725	DO i = 1, dopr_n
	726	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	727	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	728	WRITE ( io, 332 ) dopr_chr
	729	dopr_chr = ' :'
	730	ENDIF
	731	ENDDO
	732
	733	IF ( dopr_chr /= '' ) THEN
	734	WRITE ( io, 332 ) dopr_chr
	735	ENDIF
	736	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	737	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	738	ENDIF
	739
	740	!
	741	!-- 2D-arrays
	742	DO av = 0, 1
	743
	744	i = 1
	745	do2d_xy = ''
	746	do2d_xz = ''
	747	do2d_yz = ''
	748	DO WHILE ( do2d(av,i) /= ' ' )
	749
	750	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	751	do2d_mode = do2d(av,i)(l-1:l)
	752
	753	SELECT CASE ( do2d_mode )
	754	CASE ( 'xy' )
	755	ll = LEN_TRIM( do2d_xy )
	756	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	757	CASE ( 'xz' )
	758	ll = LEN_TRIM( do2d_xz )
	759	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	760	CASE ( 'yz' )
	761	ll = LEN_TRIM( do2d_yz )
	762	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	763	END SELECT
	764
	765	i = i + 1
	766
	767	ENDDO
	768
	769	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	770	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	771	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	772	( netcdf_output .OR. iso2d_output ) ) THEN
	773
	774	IF ( av == 0 ) THEN
	775	WRITE ( io, 334 ) ''
	776	ELSE
	777	WRITE ( io, 334 ) '(time-averaged)'
	778	ENDIF
	779
	780	IF ( do2d_at_begin ) THEN
	781	begin_chr = 'and at the start'
	782	ELSE
	783	begin_chr = ''
	784	ENDIF
	785
	786	output_format = ''
	787	IF ( netcdf_output ) THEN
[493]	788	IF ( netcdf_data_format == 1 ) THEN
	789	output_format = 'NetCDF classic'
	790	ELSEIF ( netcdf_data_format == 2 ) THEN
	791	output_format = 'NetCDF 64bit offset'
	792	ELSEIF ( netcdf_data_format == 3 ) THEN
	793	output_format = 'NetCDF4/HDF5'
	794	ELSEIF ( netcdf_data_format == 4 ) THEN
	795	output_format = 'NetCDF4/HDF5 clasic'
[1]	796	ENDIF
	797	ENDIF
	798	IF ( iso2d_output ) THEN
	799	IF ( netcdf_output ) THEN
	800	output_format = TRIM( output_format ) // ' and iso2d'
	801	ELSE
	802	output_format = 'iso2d'
	803	ENDIF
	804	ENDIF
[292]	805	WRITE ( io, 344 ) output_format
[1]	806
	807	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	808	i = 1
	809	slices = '/'
	810	coordinates = '/'
	811	!
	812	!-- Building strings with index and coordinate informations of the
	813	!-- slices
	814	DO WHILE ( section(i,1) /= -9999 )
	815
	816	WRITE (section_chr,'(I5)') section(i,1)
	817	section_chr = ADJUSTL( section_chr )
	818	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	819
[206]	820	IF ( section(i,1) == -1 ) THEN
	821	WRITE (coor_chr,'(F10.1)') -1.0
	822	ELSE
	823	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	824	ENDIF
[1]	825	coor_chr = ADJUSTL( coor_chr )
	826	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	827
	828	i = i + 1
	829	ENDDO
	830	IF ( av == 0 ) THEN
	831	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	832	TRIM( begin_chr ), 'k', TRIM( slices ), &
	833	TRIM( coordinates )
	834	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	835	WRITE ( io, 339 ) skip_time_do2d_xy
	836	ENDIF
	837	ELSE
	838	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	839	TRIM( begin_chr ), averaging_interval, &
	840	dt_averaging_input, 'k', TRIM( slices ), &
	841	TRIM( coordinates )
	842	IF ( skip_time_data_output_av /= 0.0 ) THEN
	843	WRITE ( io, 339 ) skip_time_data_output_av
	844	ENDIF
	845	ENDIF
	846
	847	ENDIF
	848
	849	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	850	i = 1
	851	slices = '/'
	852	coordinates = '/'
	853	!
	854	!-- Building strings with index and coordinate informations of the
	855	!-- slices
	856	DO WHILE ( section(i,2) /= -9999 )
	857
	858	WRITE (section_chr,'(I5)') section(i,2)
	859	section_chr = ADJUSTL( section_chr )
	860	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	861
	862	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	863	coor_chr = ADJUSTL( coor_chr )
	864	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	865
	866	i = i + 1
	867	ENDDO
	868	IF ( av == 0 ) THEN
	869	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	870	TRIM( begin_chr ), 'j', TRIM( slices ), &
	871	TRIM( coordinates )
	872	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	873	WRITE ( io, 339 ) skip_time_do2d_xz
	874	ENDIF
	875	ELSE
	876	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	877	TRIM( begin_chr ), averaging_interval, &
	878	dt_averaging_input, 'j', TRIM( slices ), &
	879	TRIM( coordinates )
	880	IF ( skip_time_data_output_av /= 0.0 ) THEN
	881	WRITE ( io, 339 ) skip_time_data_output_av
	882	ENDIF
	883	ENDIF
	884	ENDIF
	885
	886	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	887	i = 1
	888	slices = '/'
	889	coordinates = '/'
	890	!
	891	!-- Building strings with index and coordinate informations of the
	892	!-- slices
	893	DO WHILE ( section(i,3) /= -9999 )
	894
	895	WRITE (section_chr,'(I5)') section(i,3)
	896	section_chr = ADJUSTL( section_chr )
	897	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	898
	899	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	900	coor_chr = ADJUSTL( coor_chr )
	901	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	902
	903	i = i + 1
	904	ENDDO
	905	IF ( av == 0 ) THEN
	906	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	907	TRIM( begin_chr ), 'i', TRIM( slices ), &
	908	TRIM( coordinates )
	909	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	910	WRITE ( io, 339 ) skip_time_do2d_yz
	911	ENDIF
	912	ELSE
	913	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	914	TRIM( begin_chr ), averaging_interval, &
	915	dt_averaging_input, 'i', TRIM( slices ), &
	916	TRIM( coordinates )
	917	IF ( skip_time_data_output_av /= 0.0 ) THEN
	918	WRITE ( io, 339 ) skip_time_data_output_av
	919	ENDIF
	920	ENDIF
	921	ENDIF
	922
	923	ENDIF
	924
	925	ENDDO
	926
	927	!
	928	!-- 3d-arrays
	929	DO av = 0, 1
	930
	931	i = 1
	932	do3d_chr = ''
	933	DO WHILE ( do3d(av,i) /= ' ' )
	934
	935	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	936	i = i + 1
	937
	938	ENDDO
	939
	940	IF ( do3d_chr /= '' ) THEN
	941	IF ( av == 0 ) THEN
	942	WRITE ( io, 336 ) ''
	943	ELSE
	944	WRITE ( io, 336 ) '(time-averaged)'
	945	ENDIF
	946
	947	output_format = ''
	948	IF ( netcdf_output ) THEN
[493]	949	IF ( netcdf_data_format == 1 ) THEN
	950	output_format = 'NetCDF classic'
	951	ELSEIF ( netcdf_data_format == 2 ) THEN
	952	output_format = 'NetCDF 64bit offset'
	953	ELSEIF ( netcdf_data_format == 3 ) THEN
	954	output_format = 'NetCDF4/HDF5'
	955	ELSEIF ( netcdf_data_format == 4 ) THEN
	956	output_format = 'NetCDF4/HDF5 clasic'
[1]	957	ENDIF
	958	ENDIF
	959	IF ( avs_output ) THEN
	960	IF ( netcdf_output ) THEN
	961	output_format = TRIM( output_format ) // ' and avs'
	962	ELSE
	963	output_format = 'avs'
	964	ENDIF
	965	ENDIF
[292]	966	WRITE ( io, 344 ) output_format
[1]	967
	968	IF ( do3d_at_begin ) THEN
	969	begin_chr = 'and at the start'
	970	ELSE
	971	begin_chr = ''
	972	ENDIF
	973	IF ( av == 0 ) THEN
	974	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	975	zu(nz_do3d), nz_do3d
	976	ELSE
	977	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	978	TRIM( begin_chr ), averaging_interval, &
	979	dt_averaging_input, zu(nz_do3d), nz_do3d
	980	ENDIF
	981
	982	IF ( do3d_compress ) THEN
	983	do3d_chr = ''
	984	i = 1
	985	DO WHILE ( do3d(av,i) /= ' ' )
	986
	987	SELECT CASE ( do3d(av,i) )
	988	CASE ( 'u' )
	989	j = 1
	990	CASE ( 'v' )
	991	j = 2
	992	CASE ( 'w' )
	993	j = 3
	994	CASE ( 'p' )
	995	j = 4
	996	CASE ( 'pt' )
	997	j = 5
	998	END SELECT
	999	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	1000	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	1001	':' // prec // ','
	1002	i = i + 1
	1003
	1004	ENDDO
	1005	WRITE ( io, 338 ) do3d_chr
	1006
	1007	ENDIF
	1008
	1009	IF ( av == 0 ) THEN
	1010	IF ( skip_time_do3d /= 0.0 ) THEN
	1011	WRITE ( io, 339 ) skip_time_do3d
	1012	ENDIF
	1013	ELSE
	1014	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1015	WRITE ( io, 339 ) skip_time_data_output_av
	1016	ENDIF
	1017	ENDIF
	1018
	1019	ENDIF
	1020
	1021	ENDDO
	1022
	1023	!
[410]	1024	!-- masked arrays
	1025	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1026	mask_scale_x, mask_scale_y, mask_scale_z
	1027	DO mid = 1, masks
	1028	DO av = 0, 1
	1029
	1030	i = 1
	1031	domask_chr = ''
	1032	DO WHILE ( domask(mid,av,i) /= ' ' )
	1033	domask_chr = TRIM( domask_chr ) // ' ' // &
	1034	TRIM( domask(mid,av,i) ) // ','
	1035	i = i + 1
	1036	ENDDO
	1037
	1038	IF ( domask_chr /= '' ) THEN
	1039	IF ( av == 0 ) THEN
	1040	WRITE ( io, 346 ) '', mid
	1041	ELSE
	1042	WRITE ( io, 346 ) ' (time-averaged)', mid
	1043	ENDIF
	1044
	1045	output_format = ''
	1046	IF ( netcdf_output ) THEN
[493]	1047	IF ( netcdf_data_format == 1 ) THEN
	1048	output_format = 'NetCDF classic'
	1049	ELSEIF ( netcdf_data_format == 2 ) THEN
	1050	output_format = 'NetCDF 64bit offset'
	1051	ELSEIF ( netcdf_data_format == 3 ) THEN
	1052	output_format = 'NetCDF4/HDF5'
	1053	ELSEIF ( netcdf_data_format == 4 ) THEN
	1054	output_format = 'NetCDF4/HDF5 clasic'
	1055	ENDIF
[410]	1056	ENDIF
	1057	WRITE ( io, 344 ) output_format
	1058
	1059	IF ( av == 0 ) THEN
	1060	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1061	ELSE
	1062	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1063	averaging_interval, dt_averaging_input
	1064	ENDIF
	1065
	1066	IF ( av == 0 ) THEN
	1067	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1068	WRITE ( io, 339 ) skip_time_domask(mid)
	1069	ENDIF
	1070	ELSE
	1071	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1072	WRITE ( io, 339 ) skip_time_data_output_av
	1073	ENDIF
	1074	ENDIF
	1075	!
	1076	!-- output locations
	1077	DO dim = 1, 3
	1078	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1079	count = 0
	1080	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1081	count = count + 1
	1082	ENDDO
	1083	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1084	mask(mid,dim,:count)
	1085	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1086	mask_loop(mid,dim,2) < 0.0 .AND. &
	1087	mask_loop(mid,dim,3) == 0.0 ) THEN
	1088	WRITE ( io, 350 ) dir(dim), dir(dim)
	1089	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1090	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1091	mask_loop(mid,dim,1:2)
	1092	ELSE
	1093	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1094	mask_loop(mid,dim,1:3)
	1095	ENDIF
	1096	ENDDO
	1097	ENDIF
	1098
	1099	ENDDO
	1100	ENDDO
	1101
	1102	!
[1]	1103	!-- Timeseries
	1104	IF ( dt_dots /= 9999999.9 ) THEN
	1105	WRITE ( io, 340 )
	1106
	1107	output_format = ''
	1108	IF ( netcdf_output ) THEN
[493]	1109	IF ( netcdf_data_format == 1 ) THEN
	1110	output_format = 'NetCDF classic'
[1]	1111	ELSE
[493]	1112	output_format = 'NetCDF 64bit offset'
[1]	1113	ENDIF
	1114	ENDIF
	1115	IF ( profil_output ) THEN
	1116	IF ( netcdf_output ) THEN
	1117	output_format = TRIM( output_format ) // ' and profil'
	1118	ELSE
	1119	output_format = 'profil'
	1120	ENDIF
	1121	ENDIF
[292]	1122	WRITE ( io, 344 ) output_format
[1]	1123	WRITE ( io, 341 ) dt_dots
	1124	ENDIF
	1125
	1126	#if defined( __dvrp_graphics )
	1127	!
	1128	!-- Dvrp-output
	1129	IF ( dt_dvrp /= 9999999.9 ) THEN
	1130	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1131	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1132	i = 1
	1133	l = 0
[336]	1134	m = 0
[1]	1135	DO WHILE ( mode_dvrp(i) /= ' ' )
	1136	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1137	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1138	l = l + 1
	1139	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1140	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1141	isosurface_color(:,l)
[1]	1142	ENDIF
	1143	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1144	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1145	m = m + 1
	1146	IF ( do2d(0,j) /= ' ' ) THEN
	1147	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1148	slicer_range_limits_dvrp(:,m)
	1149	ENDIF
[1]	1150	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1151	WRITE ( io, 363 ) dvrp_psize
	1152	IF ( particle_dvrpsize /= 'none' ) THEN
	1153	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1154	dvrpsize_interval
	1155	ENDIF
	1156	IF ( particle_color /= 'none' ) THEN
	1157	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1158	color_interval
	1159	ENDIF
[1]	1160	ENDIF
	1161	i = i + 1
	1162	ENDDO
[237]	1163
[336]	1164	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1165	superelevation_y, superelevation, clip_dvrp_l, &
	1166	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1167
	1168	IF ( TRIM( topography ) /= 'flat' ) THEN
	1169	WRITE ( io, 366 ) topography_color
	1170	IF ( cluster_size > 1 ) THEN
	1171	WRITE ( io, 367 ) cluster_size
	1172	ENDIF
[237]	1173	ENDIF
	1174
[1]	1175	ENDIF
	1176	#endif
	1177
	1178	#if defined( __spectra )
	1179	!
	1180	!-- Spectra output
	1181	IF ( dt_dosp /= 9999999.9 ) THEN
	1182	WRITE ( io, 370 )
	1183
	1184	output_format = ''
	1185	IF ( netcdf_output ) THEN
[493]	1186	IF ( netcdf_data_format == 1 ) THEN
	1187	output_format = 'NetCDF classic'
[1]	1188	ELSE
[493]	1189	output_format = 'NetCDF 64bit offset'
[1]	1190	ENDIF
	1191	ENDIF
	1192	IF ( profil_output ) THEN
	1193	IF ( netcdf_output ) THEN
	1194	output_format = TRIM( output_format ) // ' and profil'
	1195	ELSE
	1196	output_format = 'profil'
	1197	ENDIF
	1198	ENDIF
[292]	1199	WRITE ( io, 344 ) output_format
[1]	1200	WRITE ( io, 371 ) dt_dosp
	1201	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1202	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1203	( spectra_direction(i), i = 1,10 ), &
[189]	1204	( comp_spectra_level(i), i = 1,100 ), &
	1205	( plot_spectra_level(i), i = 1,100 ), &
[1]	1206	averaging_interval_sp, dt_averaging_input_pr
	1207	ENDIF
	1208	#endif
	1209
	1210	WRITE ( io, 99 )
	1211
	1212	!
	1213	!-- Physical quantities
	1214	WRITE ( io, 400 )
	1215
	1216	!
	1217	!-- Geostrophic parameters
	1218	WRITE ( io, 410 ) omega, phi, f, fs
	1219
	1220	!
	1221	!-- Other quantities
	1222	WRITE ( io, 411 ) g
[97]	1223	IF ( use_reference ) THEN
	1224	IF ( ocean ) THEN
	1225	WRITE ( io, 412 ) prho_reference
	1226	ELSE
	1227	WRITE ( io, 413 ) pt_reference
	1228	ENDIF
	1229	ENDIF
[1]	1230
	1231	!
	1232	!-- Cloud physics parameters
	1233	IF ( cloud_physics ) THEN
[57]	1234	WRITE ( io, 415 )
	1235	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1236	ENDIF
	1237
	1238	!-- Profile of the geostrophic wind (component ug)
	1239	!-- Building output strings
	1240	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1241	gradients = '------'
	1242	slices = ' 0'
	1243	coordinates = ' 0.0'
	1244	i = 1
	1245	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1246
[167]	1247	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1248	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1249
[167]	1250	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1251	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1254	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1255
[167]	1256	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1257	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1258
[430]	1259	IF ( i == 10 ) THEN
	1260	EXIT
	1261	ELSE
	1262	i = i + 1
	1263	ENDIF
	1264
[1]	1265	ENDDO
	1266
	1267	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1268	TRIM( gradients ), TRIM( slices )
	1269
	1270	!-- Profile of the geostrophic wind (component vg)
	1271	!-- Building output strings
	1272	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1273	gradients = '------'
	1274	slices = ' 0'
	1275	coordinates = ' 0.0'
	1276	i = 1
	1277	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1278
[167]	1279	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1280	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1281
[167]	1282	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1283	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1284
[167]	1285	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1286	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1287
[167]	1288	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1289	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1290
[430]	1291	IF ( i == 10 ) THEN
	1292	EXIT
	1293	ELSE
	1294	i = i + 1
	1295	ENDIF
	1296
[1]	1297	ENDDO
	1298
	1299	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1300	TRIM( gradients ), TRIM( slices )
	1301
	1302	!
	1303	!-- Initial temperature profile
	1304	!-- Building output strings, starting with surface temperature
	1305	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1306	gradients = '------'
	1307	slices = ' 0'
	1308	coordinates = ' 0.0'
	1309	i = 1
	1310	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1311
[94]	1312	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1313	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1314
[94]	1315	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1316	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1317
[94]	1318	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1319	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1320
[94]	1321	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1322	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1323
[430]	1324	IF ( i == 10 ) THEN
	1325	EXIT
	1326	ELSE
	1327	i = i + 1
	1328	ENDIF
	1329
[1]	1330	ENDDO
	1331
	1332	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1333	TRIM( gradients ), TRIM( slices )
	1334
	1335	!
	1336	!-- Initial humidity profile
	1337	!-- Building output strings, starting with surface humidity
[75]	1338	IF ( humidity .OR. passive_scalar ) THEN
[1]	1339	WRITE ( temperatures, '(E8.1)' ) q_surface
	1340	gradients = '--------'
	1341	slices = ' 0'
	1342	coordinates = ' 0.0'
	1343	i = 1
	1344	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1345
	1346	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1347	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1348
	1349	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1350	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1351
	1352	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1353	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1354
	1355	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1356	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1357
[430]	1358	IF ( i == 10 ) THEN
	1359	EXIT
	1360	ELSE
	1361	i = i + 1
	1362	ENDIF
	1363
[1]	1364	ENDDO
	1365
[75]	1366	IF ( humidity ) THEN
[1]	1367	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1368	TRIM( gradients ), TRIM( slices )
	1369	ELSE
	1370	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1371	TRIM( gradients ), TRIM( slices )
	1372	ENDIF
	1373	ENDIF
	1374
	1375	!
[97]	1376	!-- Initial salinity profile
	1377	!-- Building output strings, starting with surface salinity
	1378	IF ( ocean ) THEN
	1379	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1380	gradients = '------'
	1381	slices = ' 0'
	1382	coordinates = ' 0.0'
	1383	i = 1
	1384	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1385
	1386	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1387	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1388
	1389	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1390	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1391
	1392	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1393	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1394
	1395	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1396	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1397
[430]	1398	IF ( i == 10 ) THEN
	1399	EXIT
	1400	ELSE
	1401	i = i + 1
	1402	ENDIF
	1403
[97]	1404	ENDDO
	1405
	1406	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1407	TRIM( gradients ), TRIM( slices )
	1408	ENDIF
	1409
	1410	!
[411]	1411	!-- Profile for the large scale vertial velocity
	1412	!-- Building output strings, starting with surface value
	1413	IF ( large_scale_subsidence ) THEN
	1414	temperatures = ' 0.0'
	1415	gradients = '------'
	1416	slices = ' 0'
	1417	coordinates = ' 0.0'
	1418	i = 1
[580]	1419	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1420
	1421	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1422	w_subs(subs_vertical_gradient_level_i(i))
[411]	1423	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1424
[580]	1425	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1426	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1427
[580]	1428	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1429	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1430
[580]	1431	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1432	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1433
[430]	1434	IF ( i == 10 ) THEN
	1435	EXIT
	1436	ELSE
	1437	i = i + 1
	1438	ENDIF
	1439
[411]	1440	ENDDO
	1441
	1442	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1443	TRIM( gradients ), TRIM( slices )
	1444	ENDIF
	1445
	1446	!
[1]	1447	!-- LES / turbulence parameters
	1448	WRITE ( io, 450 )
	1449
	1450	!--
	1451	! ... LES-constants used must still be added here
	1452	!--
	1453	IF ( constant_diffusion ) THEN
	1454	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1455	prandtl_number
	1456	ENDIF
	1457	IF ( .NOT. constant_diffusion) THEN
[108]	1458	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1459	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1460	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1461	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1462	ENDIF
	1463
	1464	!
	1465	!-- Special actions during the run
	1466	WRITE ( io, 470 )
	1467	IF ( create_disturbances ) THEN
	1468	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1469	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1470	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1471	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1472	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1473	ELSE
	1474	WRITE ( io, 473 ) disturbance_energy_limit
	1475	ENDIF
	1476	WRITE ( io, 474 ) TRIM( random_generator )
	1477	ENDIF
	1478	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1479	WRITE ( io, 475 ) pt_surface_initial_change
	1480	ENDIF
[75]	1481	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1482	WRITE ( io, 476 ) q_surface_initial_change
	1483	ENDIF
	1484	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1485	WRITE ( io, 477 ) q_surface_initial_change
	1486	ENDIF
	1487
[60]	1488	IF ( particle_advection ) THEN
[1]	1489	!
[60]	1490	!-- Particle attributes
	1491	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1492	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1493	end_time_prel, dt_sort_particles
[60]	1494	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1495	IF ( random_start_position ) WRITE ( io, 481 )
	1496	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1497	WRITE ( io, 495 ) total_number_of_particles
	1498	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1499	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1500	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1501	WRITE ( io, 484 ) total_number_of_tails, &
	1502	minimum_tailpoint_distance, &
	1503	maximum_tailpoint_age
	1504	ENDIF
[1]	1505	ENDIF
[60]	1506	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1507	WRITE ( io, 485 ) dt_write_particle_data
	1508	output_format = ''
	1509	IF ( netcdf_output ) THEN
[493]	1510	IF ( netcdf_data_format > 1 ) THEN
[60]	1511	output_format = 'netcdf (64 bit offset) and binary'
	1512	ELSE
	1513	output_format = 'netcdf and binary'
	1514	ENDIF
[1]	1515	ELSE
[60]	1516	output_format = 'binary'
[1]	1517	ENDIF
[292]	1518	WRITE ( io, 344 ) output_format
[1]	1519	ENDIF
[60]	1520	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1521	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1522
[60]	1523	WRITE ( io, 487 ) number_of_particle_groups
[1]	1524
[60]	1525	DO i = 1, number_of_particle_groups
	1526	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1527	WRITE ( io, 490 ) i, 0.0
	1528	WRITE ( io, 492 )
[1]	1529	ELSE
[60]	1530	WRITE ( io, 490 ) i, radius(i)
	1531	IF ( density_ratio(i) /= 0.0 ) THEN
	1532	WRITE ( io, 491 ) density_ratio(i)
	1533	ELSE
	1534	WRITE ( io, 492 )
	1535	ENDIF
[1]	1536	ENDIF
[60]	1537	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1538	pdx(i), pdy(i), pdz(i)
[336]	1539	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1540	ENDDO
[1]	1541
[60]	1542	ENDIF
[1]	1543
[60]	1544
[1]	1545	!
	1546	!-- Parameters of 1D-model
	1547	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1548	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1549	mixing_length_1d, dissipation_1d
	1550	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1551	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1552	ENDIF
	1553	ENDIF
	1554
	1555	!
	1556	!-- User-defined informations
	1557	CALL user_header( io )
	1558
	1559	WRITE ( io, 99 )
	1560
	1561	!
	1562	!-- Write buffer contents to disc immediately
[82]	1563	CALL local_flush( io )
[1]	1564
	1565	!
	1566	!-- Here the FORMATs start
	1567
	1568	99 FORMAT (1X,78('-'))
[200]	1569	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1570	1X,'* ',A,' *',9X,A/ &
	1571	1X,'***************************',9X,42('-'))
[291]	1572	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1573	37X,42('-'))
[200]	1574	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1575	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1576	' Run on host: ',A10)
[1]	1577	#if defined( __parallel )
[200]	1578	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1579	')',1X,A)
[200]	1580	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1581	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1582	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1583	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1584	37X,'because the job is running on an SMP-cluster')
[102]	1585	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1586	#endif
	1587	110 FORMAT (/' Numerical Schemes:'/ &
	1588	' -----------------'/)
	1589	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1590	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1591	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1592	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1593	' or Upstream')
	1594	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1595	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1596	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1597	' or Upstream')
	1598	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1599	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1600	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1601	' Translation velocity = ',A/ &
	1602	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1603	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1604	' of timestep changes)')
	1605	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1606	' timestep changes')
	1607	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1608	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1609	' maximum damping coefficient: ',F5.3, ' 1/s')
	1610	124 FORMAT (' Spline-overshoots are being suppressed')
	1611	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1612	' of'/ &
	1613	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1614	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1615	' of'/ &
	1616	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1617	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1618	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1619	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1620	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1621	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1622	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1623	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1624	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1625	' effective emissivity scheme')
	1626	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1627	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1628	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1629	A,'-cycle)'/ &
	1630	' number of grid levels: ',I2/ &
	1631	' Gauss-Seidel red/black iterations: ',I2)
	1632	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1633	I3,')')
	1634	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1635	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1636	I3,')'/ &
	1637	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1638	I3,')')
	1639	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1640	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1641	140 FORMAT (' maximum residual allowed: ',E10.3)
	1642	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1643	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1644	'step')
[87]	1645	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1646	'kinetic energy')
[1]	1647	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1648	'conserved'/ &
	1649	' using the ',A,' mode')
	1650	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1651	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1652	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1653	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1654	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1655	'prognostic equation for')
	1656	154 FORMAT (' the potential temperature')
[1]	1657	200 FORMAT (//' Run time and time step information:'/ &
	1658	' ----------------------------------'/)
	1659	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1660	' CFL-factor: ',F4.2)
	1661	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1662	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1663	' End time: ',F9.3,' s')
	1664	204 FORMAT ( A,F9.3,' s')
	1665	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1666	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1667	' CPU-time used: ',F9.3,' s per timestep: ', &
	1668	' ',F9.3,' s'/ &
	1669	' per second of simulated tim', &
	1670	'e: ',F9.3,' s')
[291]	1671	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1672	250 FORMAT (//' Computational grid and domain size:'/ &
	1673	' ----------------------------------'// &
	1674	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1675	' m dz = ',F7.3,' m'/ &
	1676	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1677	' m z(u) = ',F10.3,' m'/)
	1678	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1679	' factor: ',F5.3/ &
	1680	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1681	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1682	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1683	255 FORMAT (' Subdomains have equal size')
	1684	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1685	'have smaller sizes'/ &
	1686	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1687	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1688	' degrees')
	1689	270 FORMAT (//' Topography informations:'/ &
	1690	' -----------------------'// &
	1691	1X,'Topography: ',A)
	1692	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1693	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1694	' / ',I4)
[240]	1695	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1696	' direction' / &
	1697	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1698	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1699	278 FORMAT (' Topography grid definition convention:'/ &
	1700	' cell edge (staggered grid points'/ &
	1701	' (u in x-direction, v in y-direction))' /)
	1702	279 FORMAT (' Topography grid definition convention:'/ &
	1703	' cell center (scalar grid points)' /)
[138]	1704	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1705	' ------------------------------'// &
	1706	' Canopy mode: ', A / &
	1707	' Canopy top: ',I4 / &
	1708	' Leaf drag coefficient: ',F6.2 /)
[153]	1709	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1710	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1711	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1712	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1713	' Height: ',A,' m'/ &
	1714	' Leaf area density: ',A,' m2/m3'/ &
	1715	' Gradient: ',A,' m2/m4'/ &
	1716	' Gridpoint: ',A)
	1717
[1]	1718	300 FORMAT (//' Boundary conditions:'/ &
	1719	' -------------------'// &
	1720	' p uv ', &
	1721	' pt'// &
	1722	' B. bound.: ',A/ &
	1723	' T. bound.: ',A)
[97]	1724	301 FORMAT (/' ',A// &
[1]	1725	' B. bound.: ',A/ &
	1726	' T. bound.: ',A)
[19]	1727	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1728	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1729	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1730	'computational u,v-level:'// &
[1]	1731	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1732	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1733	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1734	307 FORMAT (' Heatflux has a random normal distribution')
	1735	308 FORMAT (' Predefined surface temperature')
[97]	1736	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1737	310 FORMAT (//' 1D-Model:'// &
	1738	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1739	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1740	312 FORMAT (' Predefined surface humidity')
	1741	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1742	314 FORMAT (' Predefined scalar value at the surface')
[19]	1743	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1744	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1745	'atmosphere model')
[1]	1746	317 FORMAT (//' Lateral boundaries:'/ &
	1747	' left/right: ',A/ &
	1748	' north/south: ',A)
	1749	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1750	'max =',F5.1,' m**2/s')
[151]	1751	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1752	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1753	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1754	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1755	' v: ',F9.6,' m2/s2')
[151]	1756	325 FORMAT (//' List output:'/ &
[1]	1757	' -----------'// &
	1758	' 1D-Profiles:'/ &
	1759	' Output every ',F8.2,' s')
[151]	1760	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1761	' Averaging input every ',F8.2,' s')
	1762	330 FORMAT (//' Data output:'/ &
	1763	' -----------'/)
	1764	331 FORMAT (/' 1D-Profiles:')
	1765	332 FORMAT (/' ',A)
	1766	333 FORMAT (' Output every ',F8.2,' s',/ &
	1767	' Time averaged over ',F8.2,' s'/ &
	1768	' Averaging input every ',F8.2,' s')
	1769	334 FORMAT (/' 2D-Arrays',A,':')
	1770	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1771	' Output every ',F8.2,' s ',A/ &
	1772	' Cross sections at ',A1,' = ',A/ &
	1773	' scalar-coordinates: ',A,' m'/)
	1774	336 FORMAT (/' 3D-Arrays',A,':')
	1775	337 FORMAT (/' Arrays: ',A/ &
	1776	' Output every ',F8.2,' s ',A/ &
	1777	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1778	338 FORMAT (' Compressed data output'/ &
	1779	' Decimal precision: ',A/)
	1780	339 FORMAT (' No output during initial ',F8.2,' s')
	1781	340 FORMAT (/' Time series:')
	1782	341 FORMAT (' Output every ',F8.2,' s'/)
	1783	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1784	' Output every ',F8.2,' s ',A/ &
	1785	' Time averaged over ',F8.2,' s'/ &
	1786	' Averaging input every ',F8.2,' s'/ &
	1787	' Cross sections at ',A1,' = ',A/ &
	1788	' scalar-coordinates: ',A,' m'/)
	1789	343 FORMAT (/' Arrays: ',A/ &
	1790	' Output every ',F8.2,' s ',A/ &
	1791	' Time averaged over ',F8.2,' s'/ &
	1792	' Averaging input every ',F8.2,' s'/ &
	1793	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1794	344 FORMAT (' Output format: ',A/)
[410]	1795	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1796	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1797	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1798	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1799	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1800	347 FORMAT (' Variables: ',A/ &
	1801	' Output every ',F8.2,' s')
	1802	348 FORMAT (' Variables: ',A/ &
	1803	' Output every ',F8.2,' s'/ &
	1804	' Time averaged over ',F8.2,' s'/ &
	1805	' Averaging input every ',F8.2,' s')
	1806	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1807	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1808	13(' ',8(F8.2,',')/) )
	1809	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1810	'all gridpoints along ',A,'-direction (default).' )
	1811	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1812	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1813	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1814	#if defined( __dvrp_graphics )
	1815	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1816	' Output every ',F7.1,' s'/ &
	1817	' Output mode: ',A/ &
	1818	' Host / User: ',A,' / ',A/ &
	1819	' Directory: ',A// &
	1820	' The sequence contains:')
[337]	1821	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1822	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1823	362 FORMAT (/' Slicer plane ',A/ &
[336]	1824	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1825	363 FORMAT (/' Particles'/ &
[336]	1826	' particle size: ',F7.2,' m')
	1827	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1828	F6.2,',',F6.2,']')
[337]	1829	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1830	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1831	')'/ &
	1832	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1833	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1834	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1835	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1836	#endif
	1837	#if defined( __spectra )
	1838	370 FORMAT (' Spectra:')
	1839	371 FORMAT (' Output every ',F7.1,' s'/)
	1840	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1841	' Directions: ', 10(A5,',')/ &
[189]	1842	' height levels k = ', 20(I3,',')/ &
	1843	' ', 20(I3,',')/ &
	1844	' ', 20(I3,',')/ &
	1845	' ', 20(I3,',')/ &
	1846	' ', 19(I3,','),I3,'.'/ &
[1]	1847	' height levels selected for standard plot:'/ &
[189]	1848	' k = ', 20(I3,',')/ &
	1849	' ', 20(I3,',')/ &
	1850	' ', 20(I3,',')/ &
	1851	' ', 20(I3,',')/ &
	1852	' ', 19(I3,','),I3,'.'/ &
[1]	1853	' Time averaged over ', F7.1, ' s,' / &
	1854	' Profiles for the time averaging are taken every ', &
	1855	F6.1,' s')
	1856	#endif
	1857	400 FORMAT (//' Physical quantities:'/ &
	1858	' -------------------'/)
	1859	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1860	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1861	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1862	' f* = ',F9.6,' 1/s')
	1863	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1864	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1865	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1866	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1867	' ------------------------'/)
[57]	1868	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1869	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1870	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1871	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1872	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1873	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1874	' Height: ',A,' m'/ &
	1875	' Temperature: ',A,' K'/ &
	1876	' Gradient: ',A,' K/100m'/ &
	1877	' Gridpoint: ',A)
	1878	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1879	' Height: ',A,' m'/ &
	1880	' Humidity: ',A,' kg/kg'/ &
	1881	' Gradient: ',A,' (kg/kg)/100m'/ &
	1882	' Gridpoint: ',A)
	1883	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1884	' Height: ',A,' m'/ &
	1885	' Scalar concentration: ',A,' kg/m**3'/ &
	1886	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1887	' Gridpoint: ',A)
	1888	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1889	' Height: ',A,' m'/ &
	1890	' ug: ',A,' m/s'/ &
	1891	' Gradient: ',A,' 1/100s'/ &
	1892	' Gridpoint: ',A)
	1893	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1894	' Height: ',A,' m'/ &
[97]	1895	' vg: ',A,' m/s'/ &
[1]	1896	' Gradient: ',A,' 1/100s'/ &
	1897	' Gridpoint: ',A)
[97]	1898	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1899	' Height: ',A,' m'/ &
	1900	' Salinity: ',A,' psu'/ &
	1901	' Gradient: ',A,' psu/100m'/ &
	1902	' Gridpoint: ',A)
[411]	1903	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1904	' Height: ',A,' m'/ &
	1905	' w_subs: ',A,' m/s'/ &
	1906	' Gradient: ',A,' (m/s)/100m'/ &
	1907	' Gridpoint: ',A)
[1]	1908	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1909	' ---------------------------'/)
	1910	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1911	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1912	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1913	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1914	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1915	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1916	470 FORMAT (//' Actions during the simulation:'/ &
	1917	' -----------------------------'/)
[94]	1918	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1919	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1920	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1921	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1922	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1923	' to i/j =',I4)
	1924	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1925	1X,F5.3, ' m2/s2')
	1926	474 FORMAT (' Random number generator used : ',A/)
	1927	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1928	'respectively, if'/ &
	1929	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1930	' 3D-simulation'/)
	1931	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1932	'respectively, if the'/ &
	1933	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1934	' the 3D-simulation'/)
	1935	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1936	'respectively, if the'/ &
	1937	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1938	' the 3D-simulation'/)
	1939	480 FORMAT (' Particles:'/ &
	1940	' ---------'// &
	1941	' Particle advection is active (switched on at t = ', F7.1, &
	1942	' s)'/ &
	1943	' Start of new particle generations every ',F6.1,' s'/ &
	1944	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1945	' bottom: ', A, ' top: ', A/&
	1946	' Maximum particle age: ',F9.1,' s'/ &
[117]	1947	' Advection stopped at t = ',F9.1,' s'/ &
	1948	' Particles are sorted every ',F9.1,' s'/)
[1]	1949	481 FORMAT (' Particles have random start positions'/)
[336]	1950	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1951	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1952	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1953	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1954	' Maximum age of the end of the tail: ',F8.2,' s')
	1955	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1956	486 FORMAT (' Particle statistics are written on file'/)
	1957	487 FORMAT (' Number of particle groups: ',I2/)
	1958	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1959	' minimum timestep for advection: ', F7.5/)
	1960	489 FORMAT (' Number of particles simultaneously released at each ', &
	1961	'point: ', I5/)
	1962	490 FORMAT (' Particle group ',I2,':'/ &
	1963	' Particle radius: ',E10.3, 'm')
	1964	491 FORMAT (' Particle inertia is activated'/ &
	1965	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1966	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1967	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1968	' y:',F8.1,' - ',F8.1,' m'/&
	1969	' z:',F8.1,' - ',F8.1,' m'/&
	1970	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1971	' m dz = ',F8.1,' m'/)
	1972	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1973	F8.2,' s'/)
	1974	495 FORMAT (' Number of particles in total domain: ',I10/)
	1975	500 FORMAT (//' 1D-Model parameters:'/ &
	1976	' -------------------'// &
	1977	' Simulation time: ',F8.1,' s'/ &
	1978	' Run-controll output every: ',F8.1,' s'/ &
	1979	' Vertical profile output every: ',F8.1,' s'/ &
	1980	' Mixing length calculation: ',A/ &
	1981	' Dissipation calculation: ',A/)
	1982	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1983
	1984
	1985	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |