Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 580

Last change on this file since 580 was 580, checked in by heinze, 14 years ago
Renaming of ws_vertical_gradient to subs_vertical_gradient, ws_vertical_gradient_level to subs_vertical_gradient_level and ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
Property svn:keywords set to `Id`
File size: 76.5 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[580]	6	! Renaming of ws_vertical_gradient to subs_vertical_gradient,
	7	! ws_vertical_gradient_level to subs_vertical_gradient_level and
	8	! ws_vertical_gradient_level_ind to subs_vertical_gradient_level_i
[392]	9	!
	10	! Former revisions:
	11	! -----------------
	12	! $Id: header.f90 580 2010-10-05 13:59:11Z heinze $
	13	!
[494]	14	! 493 2010-03-01 08:30:24Z raasch
	15	! NetCDF data output format extendend for NetCDF4/HDF5
	16	!
[482]	17	! 449 2010-02-02 11:23:59Z raasch
	18	! +large scale vertical motion (subsidence/ascent)
	19	! Bugfix: index problem concerning gradient_level indices removed
	20	!
[449]	21	! 410 2009-12-04 17:05:40Z letzel
	22	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	23	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	24	!
[392]	25	! 346 2009-07-06 10:13:41Z raasch
[328]	26	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	27	! Coupling with independent precursor runs.
[254]	28	! Output of messages replaced by message handling routine.
[336]	29	! Output of several additional dvr parameters
[240]	30	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	31	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	32	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	33	! topography_grid_convention moved from user_header
[292]	34	! small bugfix concerning 3d 64bit netcdf output format
[1]	35	!
[226]	36	! 206 2008-10-13 14:59:11Z raasch
	37	! Bugfix: error in zu index in case of section_xy = -1
	38	!
[200]	39	! 198 2008-09-17 08:55:28Z raasch
	40	! Format adjustments allowing output of larger revision numbers
	41	!
[198]	42	! 197 2008-09-16 15:29:03Z raasch
	43	! allow 100 spectra levels instead of 10 for consistency with
	44	! define_netcdf_header,
	45	! bugfix in the output of the characteristic levels of potential temperature,
	46	! geostrophic wind, scalar concentration, humidity and leaf area density,
	47	! output of turbulence recycling informations
	48	!
[139]	49	! 138 2007-11-28 10:03:58Z letzel
	50	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	51	! Allow two instead of one digit to specify isosurface and slicer variables.
	52	! Output of sorting frequency of particles
	53	!
[110]	54	! 108 2007-08-24 15:10:38Z letzel
	55	! Output of informations for coupled model runs (boundary conditions etc.)
	56	! + output of momentumfluxes at the top boundary
	57	! Rayleigh damping for ocean, e_init
	58	!
[98]	59	! 97 2007-06-21 08:23:15Z raasch
	60	! Adjustments for the ocean version.
	61	! use_pt_reference renamed use_reference
	62	!
[90]	63	! 87 2007-05-22 15:46:47Z raasch
	64	! Bugfix: output of use_upstream_for_tke
	65	!
[83]	66	! 82 2007-04-16 15:40:52Z raasch
	67	! Preprocessor strings for different linux clusters changed to "lc",
	68	! routine local_flush is used for buffer flushing
	69	!
[77]	70	! 76 2007-03-29 00:58:32Z raasch
	71	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	72	! output of the loop optimization method, moisture renamed humidity,
	73	! output of subversion revision number
	74	!
[39]	75	! 19 2007-02-23 04:53:48Z raasch
	76	! Output of scalar flux applied at top boundary
	77	!
[3]	78	! RCS Log replace by Id keyword, revision history cleaned up
	79	!
[1]	80	! Revision 1.63 2006/08/22 13:53:13 raasch
	81	! Output of dz_max
	82	!
	83	! Revision 1.1 1997/08/11 06:17:20 raasch
	84	! Initial revision
	85	!
	86	!
	87	! Description:
	88	! ------------
	89	! Writing a header with all important informations about the actual run.
	90	! This subroutine is called three times, two times at the beginning
	91	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	92	! end of the run, then writing additional information about CPU-usage on file
	93	! header.
[411]	94	!-----------------------------------------------------------------------------!
[1]	95
	96	USE arrays_3d
	97	USE control_parameters
	98	USE cloud_parameters
	99	USE cpulog
	100	USE dvrp_variables
	101	USE grid_variables
	102	USE indices
	103	USE model_1d
	104	USE particle_attributes
	105	USE pegrid
[411]	106	USE subsidence_mod
[1]	107	USE spectrum
	108
	109	IMPLICIT NONE
	110
	111	CHARACTER (LEN=1) :: prec
	112	CHARACTER (LEN=2) :: do2d_mode
	113	CHARACTER (LEN=5) :: section_chr
	114	CHARACTER (LEN=9) :: time_to_string
	115	CHARACTER (LEN=10) :: coor_chr, host_chr
	116	CHARACTER (LEN=16) :: begin_chr
[200]	117	CHARACTER (LEN=23) :: ver_rev
[1]	118	CHARACTER (LEN=40) :: output_format
[167]	119	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	120	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	121	domask_chr, run_classification
[167]	122	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	123	temperatures, ugcomponent, vgcomponent
[1]	124	CHARACTER (LEN=85) :: roben, runten
	125
[410]	126	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	127
	128	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	129	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	130	REAL :: cpuseconds_per_simulated_second
	131
	132	!
	133	!-- Open the output file. At the end of the simulation, output is directed
	134	!-- to unit 19.
	135	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	136	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	137	io = 15 ! header output on file RUN_CONTROL
	138	ELSE
	139	io = 19 ! header output on file HEADER
	140	ENDIF
	141	CALL check_open( io )
	142
	143	!
	144	!-- At the end of the run, output file (HEADER) will be rewritten with
	145	!-- new informations
	146	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	147
	148	!
	149	!-- Determine kind of model run
	150	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	151	run_classification = '3D - restart run'
[328]	152	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	153	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	154	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	155	run_classification = '3D - run without 1D - prerun'
[197]	156	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	157	run_classification = '3D - run with 1D - prerun'
[197]	158	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	159	run_classification = '3D - run initialized by user'
[1]	160	ELSE
[254]	161	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	162	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	163	ENDIF
[97]	164	IF ( ocean ) THEN
	165	run_classification = 'ocean - ' // run_classification
	166	ELSE
	167	run_classification = 'atmosphere - ' // run_classification
	168	ENDIF
[1]	169
	170	!
	171	!-- Run-identification, date, time, host
	172	host_chr = host(1:10)
[75]	173	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	174	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	175	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	176	#if defined( __mpi2 )
	177	mpi_type = 2
	178	#else
	179	mpi_type = 1
	180	#endif
	181	WRITE ( io, 101 ) mpi_type, coupling_mode
	182	ENDIF
[102]	183	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	184	ADJUSTR( host_chr )
[1]	185	#if defined( __parallel )
	186	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	187	char1 = 'calculated'
	188	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	189	host(1:2) == 'lc' ) .AND. &
	190	npex == -1 .AND. pdims(2) == 1 ) THEN
	191	char1 = 'forced'
	192	ELSE
	193	char1 = 'predefined'
	194	ENDIF
	195	IF ( threads_per_task == 1 ) THEN
[102]	196	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	197	ELSE
[102]	198	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	199	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	200	ENDIF
	201	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	202	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	203	npex == -1 .AND. pdims(2) == 1 ) &
	204	THEN
[102]	205	WRITE ( io, 106 )
[1]	206	ELSEIF ( pdims(2) == 1 ) THEN
[102]	207	WRITE ( io, 107 ) 'x'
[1]	208	ELSEIF ( pdims(1) == 1 ) THEN
[102]	209	WRITE ( io, 107 ) 'y'
[1]	210	ENDIF
[102]	211	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	212	#endif
	213	WRITE ( io, 99 )
	214
	215	!
	216	!-- Numerical schemes
	217	WRITE ( io, 110 )
	218	IF ( psolver(1:7) == 'poisfft' ) THEN
	219	WRITE ( io, 111 ) TRIM( fft_method )
	220	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	221	ELSEIF ( psolver == 'sor' ) THEN
	222	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	223	ELSEIF ( psolver == 'multigrid' ) THEN
	224	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	225	IF ( mg_cycles == -1 ) THEN
	226	WRITE ( io, 140 ) residual_limit
	227	ELSE
	228	WRITE ( io, 141 ) mg_cycles
	229	ENDIF
	230	IF ( mg_switch_to_pe0_level == 0 ) THEN
	231	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	232	nzt_mg(1)
[197]	233	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	234	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	235	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	236	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	237	nzt_mg(mg_switch_to_pe0_level), &
	238	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	239	nzt_mg(1)
	240	ENDIF
	241	ENDIF
	242	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	243	THEN
	244	WRITE ( io, 142 )
	245	ENDIF
	246
	247	IF ( momentum_advec == 'pw-scheme' ) THEN
	248	WRITE ( io, 113 )
	249	ELSE
	250	WRITE ( io, 114 )
	251	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	252	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	253	overshoot_limit_w /= 0.0 ) THEN
	254	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	255	overshoot_limit_w
	256	ENDIF
	257	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	258	ups_limit_w /= 0.0 ) &
	259	THEN
	260	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	261	ENDIF
	262	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	263	ENDIF
	264	IF ( scalar_advec == 'pw-scheme' ) THEN
	265	WRITE ( io, 116 )
	266	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	267	WRITE ( io, 117 )
	268	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	269	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	270	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	271	ENDIF
	272	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	273	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	274	ENDIF
	275	ELSE
	276	WRITE ( io, 118 )
	277	ENDIF
[63]	278
	279	WRITE ( io, 139 ) TRIM( loop_optimization )
	280
[1]	281	IF ( galilei_transformation ) THEN
	282	IF ( use_ug_for_galilei_tr ) THEN
	283	char1 = 'geostrophic wind'
	284	ELSE
	285	char1 = 'mean wind in model domain'
	286	ENDIF
	287	IF ( simulated_time_at_begin == simulated_time ) THEN
	288	char2 = 'at the start of the run'
	289	ELSE
	290	char2 = 'at the end of the run'
	291	ENDIF
	292	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	293	advected_distance_x/1000.0, advected_distance_y/1000.0
	294	ENDIF
	295	IF ( timestep_scheme == 'leapfrog' ) THEN
	296	WRITE ( io, 120 )
	297	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	298	WRITE ( io, 121 )
	299	ELSE
	300	WRITE ( io, 122 ) timestep_scheme
	301	ENDIF
[87]	302	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	303	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	304	IF ( .NOT. ocean ) THEN
	305	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	306	rayleigh_damping_factor
	307	ELSE
	308	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	309	rayleigh_damping_factor
	310	ENDIF
[1]	311	ENDIF
[75]	312	IF ( humidity ) THEN
[1]	313	IF ( .NOT. cloud_physics ) THEN
	314	WRITE ( io, 129 )
	315	ELSE
	316	WRITE ( io, 130 )
	317	WRITE ( io, 131 )
	318	IF ( radiation ) WRITE ( io, 132 )
	319	IF ( precipitation ) WRITE ( io, 133 )
	320	ENDIF
	321	ENDIF
	322	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	323	IF ( conserve_volume_flow ) THEN
[241]	324	WRITE ( io, 150 ) conserve_volume_flow_mode
	325	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	326	WRITE ( io, 151 ) u_bulk, v_bulk
	327	ENDIF
[240]	328	ELSEIF ( dp_external ) THEN
	329	IF ( dp_smooth ) THEN
[241]	330	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	331	ELSE
[241]	332	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	333	ENDIF
	334	ENDIF
[411]	335	IF ( large_scale_subsidence ) THEN
	336	WRITE ( io, 153 )
	337	WRITE ( io, 154 )
	338	ENDIF
[1]	339	WRITE ( io, 99 )
	340
	341	!
	342	!-- Runtime and timestep informations
	343	WRITE ( io, 200 )
	344	IF ( .NOT. dt_fixed ) THEN
	345	WRITE ( io, 201 ) dt_max, cfl_factor
	346	ELSE
	347	WRITE ( io, 202 ) dt
	348	ENDIF
	349	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	350
	351	IF ( time_restart /= 9999999.9 .AND. &
	352	simulated_time_at_begin == simulated_time ) THEN
	353	IF ( dt_restart == 9999999.9 ) THEN
	354	WRITE ( io, 204 ) ' Restart at: ',time_restart
	355	ELSE
	356	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	357	ENDIF
	358	ENDIF
	359
	360	IF ( simulated_time_at_begin /= simulated_time ) THEN
	361	i = MAX ( log_point_s(10)%counts, 1 )
	362	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	363	cpuseconds_per_simulated_second = 0.0
	364	ELSE
	365	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	366	( simulated_time - &
	367	simulated_time_at_begin )
	368	ENDIF
	369	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	370	log_point_s(10)%sum / REAL( i ), &
	371	cpuseconds_per_simulated_second
	372	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	373	IF ( dt_restart == 9999999.9 ) THEN
	374	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	375	ELSE
	376	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	377	ENDIF
	378	ENDIF
	379	ENDIF
	380
	381	!
[291]	382	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	383	!-- and ocean are used. In this case, coupling_start_time defines the time
	384	!-- when the coupling is switched on.
	385	IF ( coupling_start_time /= 0.0 ) THEN
	386	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	387	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	388	ELSE
	389	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	390	'precursor runs'
	391	ENDIF
	392	WRITE ( io, 207 ) char1, coupling_start_time
	393	ENDIF
	394
	395	!
[1]	396	!-- Computational grid
[94]	397	IF ( .NOT. ocean ) THEN
	398	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	399	IF ( dz_stretch_level_index < nzt+1 ) THEN
	400	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	401	dz_stretch_factor, dz_max
	402	ENDIF
	403	ELSE
	404	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	405	IF ( dz_stretch_level_index > 0 ) THEN
	406	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	407	dz_stretch_factor, dz_max
	408	ENDIF
[1]	409	ENDIF
	410	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	411	MIN( nnz+2, nzt+2 )
[76]	412	IF ( numprocs > 1 ) THEN
	413	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	414	WRITE ( io, 255 )
	415	ELSE
	416	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	417	ENDIF
[1]	418	ENDIF
	419	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	420
	421	!
	422	!-- Topography
	423	WRITE ( io, 270 ) topography
	424	SELECT CASE ( TRIM( topography ) )
	425
	426	CASE ( 'flat' )
	427	! no actions necessary
	428
	429	CASE ( 'single_building' )
	430	blx = INT( building_length_x / dx )
	431	bly = INT( building_length_y / dy )
	432	bh = INT( building_height / dz )
	433
	434	IF ( building_wall_left == 9999999.9 ) THEN
	435	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	436	ENDIF
	437	bxl = INT ( building_wall_left / dx + 0.5 )
	438	bxr = bxl + blx
	439
	440	IF ( building_wall_south == 9999999.9 ) THEN
	441	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	442	ENDIF
	443	bys = INT ( building_wall_south / dy + 0.5 )
	444	byn = bys + bly
	445
	446	WRITE ( io, 271 ) building_length_x, building_length_y, &
	447	building_height, bxl, bxr, bys, byn
	448
[240]	449	CASE ( 'single_street_canyon' )
	450	ch = NINT( canyon_height / dz )
	451	IF ( canyon_width_x /= 9999999.9 ) THEN
	452	!
	453	!-- Street canyon in y direction
	454	cwx = NINT( canyon_width_x / dx )
	455	IF ( canyon_wall_left == 9999999.9 ) THEN
	456	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	457	ENDIF
	458	cxl = NINT( canyon_wall_left / dx )
	459	cxr = cxl + cwx
	460	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	461
	462	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	463	!
	464	!-- Street canyon in x direction
	465	cwy = NINT( canyon_width_y / dy )
	466	IF ( canyon_wall_south == 9999999.9 ) THEN
	467	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	468	ENDIF
	469	cys = NINT( canyon_wall_south / dy )
	470	cyn = cys + cwy
	471	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	472	ENDIF
	473
[1]	474	END SELECT
	475
[256]	476	IF ( TRIM( topography ) /= 'flat' ) THEN
	477	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	478	IF ( TRIM( topography ) == 'single_building' .OR. &
	479	TRIM( topography ) == 'single_street_canyon' ) THEN
	480	WRITE ( io, 278 )
	481	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	482	WRITE ( io, 279 )
	483	ENDIF
	484	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	485	WRITE ( io, 278 )
	486	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	487	WRITE ( io, 279 )
	488	ENDIF
	489	ENDIF
	490
[138]	491	IF ( plant_canopy ) THEN
	492
	493	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	494	IF ( passive_scalar ) THEN
	495	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	496	leaf_surface_concentration
	497	ENDIF
[138]	498
[1]	499	!
[153]	500	!-- Heat flux at the top of vegetation
	501	WRITE ( io, 282 ) cthf
	502
	503	!
[138]	504	!-- Leaf area density profile
	505	!-- Building output strings, starting with surface value
	506	WRITE ( learde, '(F6.2)' ) lad_surface
	507	gradients = '------'
	508	slices = ' 0'
	509	coordinates = ' 0.0'
	510	i = 1
	511	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	512
	513	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	514	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	515
	516	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	517	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	518
	519	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	520	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	521
	522	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	523	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	524
	525	i = i + 1
	526	ENDDO
	527
[153]	528	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	529	TRIM( gradients ), TRIM( slices )
	530
	531	ENDIF
	532
	533	!
[1]	534	!-- Boundary conditions
	535	IF ( ibc_p_b == 0 ) THEN
	536	runten = 'p(0) = 0 \|'
	537	ELSEIF ( ibc_p_b == 1 ) THEN
	538	runten = 'p(0) = p(1) \|'
	539	ELSE
	540	runten = 'p(0) = p(1) +R\|'
	541	ENDIF
	542	IF ( ibc_p_t == 0 ) THEN
	543	roben = 'p(nzt+1) = 0 \|'
	544	ELSE
	545	roben = 'p(nzt+1) = p(nzt) \|'
	546	ENDIF
	547
	548	IF ( ibc_uv_b == 0 ) THEN
	549	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	550	ELSE
	551	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	552	ENDIF
[132]	553	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	554	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	555	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	556	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	557	ELSE
	558	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	559	ENDIF
	560
	561	IF ( ibc_pt_b == 0 ) THEN
	562	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	563	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	564	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	565	ELSEIF ( ibc_pt_b == 2 ) THEN
	566	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	567	ENDIF
	568	IF ( ibc_pt_t == 0 ) THEN
[19]	569	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	570	ELSEIF( ibc_pt_t == 1 ) THEN
	571	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	572	ELSEIF( ibc_pt_t == 2 ) THEN
	573	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	574	ENDIF
	575
	576	WRITE ( io, 300 ) runten, roben
	577
	578	IF ( .NOT. constant_diffusion ) THEN
	579	IF ( ibc_e_b == 1 ) THEN
	580	runten = 'e(0) = e(1)'
	581	ELSE
	582	runten = 'e(0) = e(1) = (u/0.1)*2'
	583	ENDIF
	584	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	585
[97]	586	WRITE ( io, 301 ) 'e', runten, roben
[1]	587
	588	ENDIF
	589
[97]	590	IF ( ocean ) THEN
	591	runten = 'sa(0) = sa(1)'
	592	IF ( ibc_sa_t == 0 ) THEN
	593	roben = 'sa(nzt+1) = sa_surface'
[1]	594	ELSE
[97]	595	roben = 'sa(nzt+1) = sa(nzt)'
[1]	596	ENDIF
[97]	597	WRITE ( io, 301 ) 'sa', runten, roben
	598	ENDIF
[1]	599
[97]	600	IF ( humidity ) THEN
	601	IF ( ibc_q_b == 0 ) THEN
	602	runten = 'q(0) = q_surface'
	603	ELSE
	604	runten = 'q(0) = q(1)'
	605	ENDIF
	606	IF ( ibc_q_t == 0 ) THEN
	607	roben = 'q(nzt) = q_top'
	608	ELSE
	609	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	610	ENDIF
	611	WRITE ( io, 301 ) 'q', runten, roben
	612	ENDIF
[1]	613
[97]	614	IF ( passive_scalar ) THEN
	615	IF ( ibc_q_b == 0 ) THEN
	616	runten = 's(0) = s_surface'
	617	ELSE
	618	runten = 's(0) = s(1)'
	619	ENDIF
	620	IF ( ibc_q_t == 0 ) THEN
	621	roben = 's(nzt) = s_top'
	622	ELSE
	623	roben = 's(nzt) = s(nzt-1) + ds/dz'
	624	ENDIF
	625	WRITE ( io, 301 ) 's', runten, roben
[1]	626	ENDIF
	627
	628	IF ( use_surface_fluxes ) THEN
	629	WRITE ( io, 303 )
	630	IF ( constant_heatflux ) THEN
	631	WRITE ( io, 306 ) surface_heatflux
	632	IF ( random_heatflux ) WRITE ( io, 307 )
	633	ENDIF
[75]	634	IF ( humidity .AND. constant_waterflux ) THEN
[1]	635	WRITE ( io, 311 ) surface_waterflux
	636	ENDIF
	637	IF ( passive_scalar .AND. constant_waterflux ) THEN
	638	WRITE ( io, 313 ) surface_waterflux
	639	ENDIF
	640	ENDIF
	641
[19]	642	IF ( use_top_fluxes ) THEN
	643	WRITE ( io, 304 )
[102]	644	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	645	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	646	IF ( constant_top_heatflux ) THEN
	647	WRITE ( io, 306 ) top_heatflux
	648	ENDIF
	649	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	650	WRITE ( io, 316 )
[19]	651	ENDIF
[97]	652	IF ( ocean .AND. constant_top_salinityflux ) THEN
	653	WRITE ( io, 309 ) top_salinityflux
	654	ENDIF
[75]	655	IF ( humidity .OR. passive_scalar ) THEN
[19]	656	WRITE ( io, 315 )
	657	ENDIF
	658	ENDIF
	659
[1]	660	IF ( prandtl_layer ) THEN
[94]	661	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	662	rif_min, rif_max
[1]	663	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	664	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	665	WRITE ( io, 312 )
	666	ENDIF
	667	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	668	WRITE ( io, 314 )
	669	ENDIF
	670	ELSE
	671	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	672	WRITE ( io, 310 ) rif_min, rif_max
	673	ENDIF
	674	ENDIF
	675
	676	WRITE ( io, 317 ) bc_lr, bc_ns
	677	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	678	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	679	IF ( turbulent_inflow ) THEN
	680	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	681	inflow_damping_height, inflow_damping_width
	682	ENDIF
[1]	683	ENDIF
	684
	685	!
	686	!-- Listing of 1D-profiles
[151]	687	WRITE ( io, 325 ) dt_dopr_listing
[1]	688	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	689	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	690	ENDIF
	691
	692	!
	693	!-- DATA output
	694	WRITE ( io, 330 )
	695	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	696	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	697	ENDIF
	698
	699	!
	700	!-- 1D-profiles
[346]	701	dopr_chr = 'Profile:'
[1]	702	IF ( dopr_n /= 0 ) THEN
	703	WRITE ( io, 331 )
	704
	705	output_format = ''
	706	IF ( netcdf_output ) THEN
[493]	707	IF ( netcdf_data_format == 1 ) THEN
	708	output_format = 'NetCDF classic'
[1]	709	ELSE
[493]	710	output_format = 'NetCDF 64bit offset'
[1]	711	ENDIF
	712	ENDIF
	713	IF ( profil_output ) THEN
	714	IF ( netcdf_output ) THEN
	715	output_format = TRIM( output_format ) // ' and profil'
	716	ELSE
	717	output_format = 'profil'
	718	ENDIF
	719	ENDIF
[292]	720	WRITE ( io, 344 ) output_format
[1]	721
	722	DO i = 1, dopr_n
	723	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	724	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	725	WRITE ( io, 332 ) dopr_chr
	726	dopr_chr = ' :'
	727	ENDIF
	728	ENDDO
	729
	730	IF ( dopr_chr /= '' ) THEN
	731	WRITE ( io, 332 ) dopr_chr
	732	ENDIF
	733	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	734	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	735	ENDIF
	736
	737	!
	738	!-- 2D-arrays
	739	DO av = 0, 1
	740
	741	i = 1
	742	do2d_xy = ''
	743	do2d_xz = ''
	744	do2d_yz = ''
	745	DO WHILE ( do2d(av,i) /= ' ' )
	746
	747	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	748	do2d_mode = do2d(av,i)(l-1:l)
	749
	750	SELECT CASE ( do2d_mode )
	751	CASE ( 'xy' )
	752	ll = LEN_TRIM( do2d_xy )
	753	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	754	CASE ( 'xz' )
	755	ll = LEN_TRIM( do2d_xz )
	756	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	757	CASE ( 'yz' )
	758	ll = LEN_TRIM( do2d_yz )
	759	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	760	END SELECT
	761
	762	i = i + 1
	763
	764	ENDDO
	765
	766	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	767	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	768	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	769	( netcdf_output .OR. iso2d_output ) ) THEN
	770
	771	IF ( av == 0 ) THEN
	772	WRITE ( io, 334 ) ''
	773	ELSE
	774	WRITE ( io, 334 ) '(time-averaged)'
	775	ENDIF
	776
	777	IF ( do2d_at_begin ) THEN
	778	begin_chr = 'and at the start'
	779	ELSE
	780	begin_chr = ''
	781	ENDIF
	782
	783	output_format = ''
	784	IF ( netcdf_output ) THEN
[493]	785	IF ( netcdf_data_format == 1 ) THEN
	786	output_format = 'NetCDF classic'
	787	ELSEIF ( netcdf_data_format == 2 ) THEN
	788	output_format = 'NetCDF 64bit offset'
	789	ELSEIF ( netcdf_data_format == 3 ) THEN
	790	output_format = 'NetCDF4/HDF5'
	791	ELSEIF ( netcdf_data_format == 4 ) THEN
	792	output_format = 'NetCDF4/HDF5 clasic'
[1]	793	ENDIF
	794	ENDIF
	795	IF ( iso2d_output ) THEN
	796	IF ( netcdf_output ) THEN
	797	output_format = TRIM( output_format ) // ' and iso2d'
	798	ELSE
	799	output_format = 'iso2d'
	800	ENDIF
	801	ENDIF
[292]	802	WRITE ( io, 344 ) output_format
[1]	803
	804	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	805	i = 1
	806	slices = '/'
	807	coordinates = '/'
	808	!
	809	!-- Building strings with index and coordinate informations of the
	810	!-- slices
	811	DO WHILE ( section(i,1) /= -9999 )
	812
	813	WRITE (section_chr,'(I5)') section(i,1)
	814	section_chr = ADJUSTL( section_chr )
	815	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	816
[206]	817	IF ( section(i,1) == -1 ) THEN
	818	WRITE (coor_chr,'(F10.1)') -1.0
	819	ELSE
	820	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	821	ENDIF
[1]	822	coor_chr = ADJUSTL( coor_chr )
	823	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	824
	825	i = i + 1
	826	ENDDO
	827	IF ( av == 0 ) THEN
	828	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	829	TRIM( begin_chr ), 'k', TRIM( slices ), &
	830	TRIM( coordinates )
	831	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	832	WRITE ( io, 339 ) skip_time_do2d_xy
	833	ENDIF
	834	ELSE
	835	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	836	TRIM( begin_chr ), averaging_interval, &
	837	dt_averaging_input, 'k', TRIM( slices ), &
	838	TRIM( coordinates )
	839	IF ( skip_time_data_output_av /= 0.0 ) THEN
	840	WRITE ( io, 339 ) skip_time_data_output_av
	841	ENDIF
	842	ENDIF
	843
	844	ENDIF
	845
	846	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	847	i = 1
	848	slices = '/'
	849	coordinates = '/'
	850	!
	851	!-- Building strings with index and coordinate informations of the
	852	!-- slices
	853	DO WHILE ( section(i,2) /= -9999 )
	854
	855	WRITE (section_chr,'(I5)') section(i,2)
	856	section_chr = ADJUSTL( section_chr )
	857	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	858
	859	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	860	coor_chr = ADJUSTL( coor_chr )
	861	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	862
	863	i = i + 1
	864	ENDDO
	865	IF ( av == 0 ) THEN
	866	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	867	TRIM( begin_chr ), 'j', TRIM( slices ), &
	868	TRIM( coordinates )
	869	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	870	WRITE ( io, 339 ) skip_time_do2d_xz
	871	ENDIF
	872	ELSE
	873	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	874	TRIM( begin_chr ), averaging_interval, &
	875	dt_averaging_input, 'j', TRIM( slices ), &
	876	TRIM( coordinates )
	877	IF ( skip_time_data_output_av /= 0.0 ) THEN
	878	WRITE ( io, 339 ) skip_time_data_output_av
	879	ENDIF
	880	ENDIF
	881	ENDIF
	882
	883	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	884	i = 1
	885	slices = '/'
	886	coordinates = '/'
	887	!
	888	!-- Building strings with index and coordinate informations of the
	889	!-- slices
	890	DO WHILE ( section(i,3) /= -9999 )
	891
	892	WRITE (section_chr,'(I5)') section(i,3)
	893	section_chr = ADJUSTL( section_chr )
	894	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	895
	896	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	897	coor_chr = ADJUSTL( coor_chr )
	898	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	899
	900	i = i + 1
	901	ENDDO
	902	IF ( av == 0 ) THEN
	903	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	904	TRIM( begin_chr ), 'i', TRIM( slices ), &
	905	TRIM( coordinates )
	906	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	907	WRITE ( io, 339 ) skip_time_do2d_yz
	908	ENDIF
	909	ELSE
	910	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	911	TRIM( begin_chr ), averaging_interval, &
	912	dt_averaging_input, 'i', TRIM( slices ), &
	913	TRIM( coordinates )
	914	IF ( skip_time_data_output_av /= 0.0 ) THEN
	915	WRITE ( io, 339 ) skip_time_data_output_av
	916	ENDIF
	917	ENDIF
	918	ENDIF
	919
	920	ENDIF
	921
	922	ENDDO
	923
	924	!
	925	!-- 3d-arrays
	926	DO av = 0, 1
	927
	928	i = 1
	929	do3d_chr = ''
	930	DO WHILE ( do3d(av,i) /= ' ' )
	931
	932	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	933	i = i + 1
	934
	935	ENDDO
	936
	937	IF ( do3d_chr /= '' ) THEN
	938	IF ( av == 0 ) THEN
	939	WRITE ( io, 336 ) ''
	940	ELSE
	941	WRITE ( io, 336 ) '(time-averaged)'
	942	ENDIF
	943
	944	output_format = ''
	945	IF ( netcdf_output ) THEN
[493]	946	IF ( netcdf_data_format == 1 ) THEN
	947	output_format = 'NetCDF classic'
	948	ELSEIF ( netcdf_data_format == 2 ) THEN
	949	output_format = 'NetCDF 64bit offset'
	950	ELSEIF ( netcdf_data_format == 3 ) THEN
	951	output_format = 'NetCDF4/HDF5'
	952	ELSEIF ( netcdf_data_format == 4 ) THEN
	953	output_format = 'NetCDF4/HDF5 clasic'
[1]	954	ENDIF
	955	ENDIF
	956	IF ( avs_output ) THEN
	957	IF ( netcdf_output ) THEN
	958	output_format = TRIM( output_format ) // ' and avs'
	959	ELSE
	960	output_format = 'avs'
	961	ENDIF
	962	ENDIF
[292]	963	WRITE ( io, 344 ) output_format
[1]	964
	965	IF ( do3d_at_begin ) THEN
	966	begin_chr = 'and at the start'
	967	ELSE
	968	begin_chr = ''
	969	ENDIF
	970	IF ( av == 0 ) THEN
	971	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	972	zu(nz_do3d), nz_do3d
	973	ELSE
	974	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	975	TRIM( begin_chr ), averaging_interval, &
	976	dt_averaging_input, zu(nz_do3d), nz_do3d
	977	ENDIF
	978
	979	IF ( do3d_compress ) THEN
	980	do3d_chr = ''
	981	i = 1
	982	DO WHILE ( do3d(av,i) /= ' ' )
	983
	984	SELECT CASE ( do3d(av,i) )
	985	CASE ( 'u' )
	986	j = 1
	987	CASE ( 'v' )
	988	j = 2
	989	CASE ( 'w' )
	990	j = 3
	991	CASE ( 'p' )
	992	j = 4
	993	CASE ( 'pt' )
	994	j = 5
	995	END SELECT
	996	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	997	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	998	':' // prec // ','
	999	i = i + 1
	1000
	1001	ENDDO
	1002	WRITE ( io, 338 ) do3d_chr
	1003
	1004	ENDIF
	1005
	1006	IF ( av == 0 ) THEN
	1007	IF ( skip_time_do3d /= 0.0 ) THEN
	1008	WRITE ( io, 339 ) skip_time_do3d
	1009	ENDIF
	1010	ELSE
	1011	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1012	WRITE ( io, 339 ) skip_time_data_output_av
	1013	ENDIF
	1014	ENDIF
	1015
	1016	ENDIF
	1017
	1018	ENDDO
	1019
	1020	!
[410]	1021	!-- masked arrays
	1022	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1023	mask_scale_x, mask_scale_y, mask_scale_z
	1024	DO mid = 1, masks
	1025	DO av = 0, 1
	1026
	1027	i = 1
	1028	domask_chr = ''
	1029	DO WHILE ( domask(mid,av,i) /= ' ' )
	1030	domask_chr = TRIM( domask_chr ) // ' ' // &
	1031	TRIM( domask(mid,av,i) ) // ','
	1032	i = i + 1
	1033	ENDDO
	1034
	1035	IF ( domask_chr /= '' ) THEN
	1036	IF ( av == 0 ) THEN
	1037	WRITE ( io, 346 ) '', mid
	1038	ELSE
	1039	WRITE ( io, 346 ) ' (time-averaged)', mid
	1040	ENDIF
	1041
	1042	output_format = ''
	1043	IF ( netcdf_output ) THEN
[493]	1044	IF ( netcdf_data_format == 1 ) THEN
	1045	output_format = 'NetCDF classic'
	1046	ELSEIF ( netcdf_data_format == 2 ) THEN
	1047	output_format = 'NetCDF 64bit offset'
	1048	ELSEIF ( netcdf_data_format == 3 ) THEN
	1049	output_format = 'NetCDF4/HDF5'
	1050	ELSEIF ( netcdf_data_format == 4 ) THEN
	1051	output_format = 'NetCDF4/HDF5 clasic'
	1052	ENDIF
[410]	1053	ENDIF
	1054	WRITE ( io, 344 ) output_format
	1055
	1056	IF ( av == 0 ) THEN
	1057	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1058	ELSE
	1059	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1060	averaging_interval, dt_averaging_input
	1061	ENDIF
	1062
	1063	IF ( av == 0 ) THEN
	1064	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1065	WRITE ( io, 339 ) skip_time_domask(mid)
	1066	ENDIF
	1067	ELSE
	1068	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1069	WRITE ( io, 339 ) skip_time_data_output_av
	1070	ENDIF
	1071	ENDIF
	1072	!
	1073	!-- output locations
	1074	DO dim = 1, 3
	1075	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1076	count = 0
	1077	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1078	count = count + 1
	1079	ENDDO
	1080	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1081	mask(mid,dim,:count)
	1082	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1083	mask_loop(mid,dim,2) < 0.0 .AND. &
	1084	mask_loop(mid,dim,3) == 0.0 ) THEN
	1085	WRITE ( io, 350 ) dir(dim), dir(dim)
	1086	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1087	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1088	mask_loop(mid,dim,1:2)
	1089	ELSE
	1090	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1091	mask_loop(mid,dim,1:3)
	1092	ENDIF
	1093	ENDDO
	1094	ENDIF
	1095
	1096	ENDDO
	1097	ENDDO
	1098
	1099	!
[1]	1100	!-- Timeseries
	1101	IF ( dt_dots /= 9999999.9 ) THEN
	1102	WRITE ( io, 340 )
	1103
	1104	output_format = ''
	1105	IF ( netcdf_output ) THEN
[493]	1106	IF ( netcdf_data_format == 1 ) THEN
	1107	output_format = 'NetCDF classic'
[1]	1108	ELSE
[493]	1109	output_format = 'NetCDF 64bit offset'
[1]	1110	ENDIF
	1111	ENDIF
	1112	IF ( profil_output ) THEN
	1113	IF ( netcdf_output ) THEN
	1114	output_format = TRIM( output_format ) // ' and profil'
	1115	ELSE
	1116	output_format = 'profil'
	1117	ENDIF
	1118	ENDIF
[292]	1119	WRITE ( io, 344 ) output_format
[1]	1120	WRITE ( io, 341 ) dt_dots
	1121	ENDIF
	1122
	1123	#if defined( __dvrp_graphics )
	1124	!
	1125	!-- Dvrp-output
	1126	IF ( dt_dvrp /= 9999999.9 ) THEN
	1127	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1128	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1129	i = 1
	1130	l = 0
[336]	1131	m = 0
[1]	1132	DO WHILE ( mode_dvrp(i) /= ' ' )
	1133	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1134	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1135	l = l + 1
	1136	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1137	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1138	isosurface_color(:,l)
[1]	1139	ENDIF
	1140	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1141	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1142	m = m + 1
	1143	IF ( do2d(0,j) /= ' ' ) THEN
	1144	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1145	slicer_range_limits_dvrp(:,m)
	1146	ENDIF
[1]	1147	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1148	WRITE ( io, 363 ) dvrp_psize
	1149	IF ( particle_dvrpsize /= 'none' ) THEN
	1150	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1151	dvrpsize_interval
	1152	ENDIF
	1153	IF ( particle_color /= 'none' ) THEN
	1154	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1155	color_interval
	1156	ENDIF
[1]	1157	ENDIF
	1158	i = i + 1
	1159	ENDDO
[237]	1160
[336]	1161	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1162	superelevation_y, superelevation, clip_dvrp_l, &
	1163	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1164
	1165	IF ( TRIM( topography ) /= 'flat' ) THEN
	1166	WRITE ( io, 366 ) topography_color
	1167	IF ( cluster_size > 1 ) THEN
	1168	WRITE ( io, 367 ) cluster_size
	1169	ENDIF
[237]	1170	ENDIF
	1171
[1]	1172	ENDIF
	1173	#endif
	1174
	1175	#if defined( __spectra )
	1176	!
	1177	!-- Spectra output
	1178	IF ( dt_dosp /= 9999999.9 ) THEN
	1179	WRITE ( io, 370 )
	1180
	1181	output_format = ''
	1182	IF ( netcdf_output ) THEN
[493]	1183	IF ( netcdf_data_format == 1 ) THEN
	1184	output_format = 'NetCDF classic'
[1]	1185	ELSE
[493]	1186	output_format = 'NetCDF 64bit offset'
[1]	1187	ENDIF
	1188	ENDIF
	1189	IF ( profil_output ) THEN
	1190	IF ( netcdf_output ) THEN
	1191	output_format = TRIM( output_format ) // ' and profil'
	1192	ELSE
	1193	output_format = 'profil'
	1194	ENDIF
	1195	ENDIF
[292]	1196	WRITE ( io, 344 ) output_format
[1]	1197	WRITE ( io, 371 ) dt_dosp
	1198	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1199	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1200	( spectra_direction(i), i = 1,10 ), &
[189]	1201	( comp_spectra_level(i), i = 1,100 ), &
	1202	( plot_spectra_level(i), i = 1,100 ), &
[1]	1203	averaging_interval_sp, dt_averaging_input_pr
	1204	ENDIF
	1205	#endif
	1206
	1207	WRITE ( io, 99 )
	1208
	1209	!
	1210	!-- Physical quantities
	1211	WRITE ( io, 400 )
	1212
	1213	!
	1214	!-- Geostrophic parameters
	1215	WRITE ( io, 410 ) omega, phi, f, fs
	1216
	1217	!
	1218	!-- Other quantities
	1219	WRITE ( io, 411 ) g
[97]	1220	IF ( use_reference ) THEN
	1221	IF ( ocean ) THEN
	1222	WRITE ( io, 412 ) prho_reference
	1223	ELSE
	1224	WRITE ( io, 413 ) pt_reference
	1225	ENDIF
	1226	ENDIF
[1]	1227
	1228	!
	1229	!-- Cloud physics parameters
	1230	IF ( cloud_physics ) THEN
[57]	1231	WRITE ( io, 415 )
	1232	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1233	ENDIF
	1234
	1235	!-- Profile of the geostrophic wind (component ug)
	1236	!-- Building output strings
	1237	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1238	gradients = '------'
	1239	slices = ' 0'
	1240	coordinates = ' 0.0'
	1241	i = 1
	1242	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1243
[167]	1244	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1245	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1246
[167]	1247	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1248	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1249
[167]	1250	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1251	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1252
[167]	1253	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1254	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1255
[430]	1256	IF ( i == 10 ) THEN
	1257	EXIT
	1258	ELSE
	1259	i = i + 1
	1260	ENDIF
	1261
[1]	1262	ENDDO
	1263
	1264	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1265	TRIM( gradients ), TRIM( slices )
	1266
	1267	!-- Profile of the geostrophic wind (component vg)
	1268	!-- Building output strings
	1269	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1270	gradients = '------'
	1271	slices = ' 0'
	1272	coordinates = ' 0.0'
	1273	i = 1
	1274	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1275
[167]	1276	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1277	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1278
[167]	1279	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1280	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1281
[167]	1282	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1283	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1284
[167]	1285	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1286	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1287
[430]	1288	IF ( i == 10 ) THEN
	1289	EXIT
	1290	ELSE
	1291	i = i + 1
	1292	ENDIF
	1293
[1]	1294	ENDDO
	1295
	1296	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1297	TRIM( gradients ), TRIM( slices )
	1298
	1299	!
	1300	!-- Initial temperature profile
	1301	!-- Building output strings, starting with surface temperature
	1302	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1303	gradients = '------'
	1304	slices = ' 0'
	1305	coordinates = ' 0.0'
	1306	i = 1
	1307	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1308
[94]	1309	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1310	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1311
[94]	1312	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1313	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1314
[94]	1315	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1316	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1317
[94]	1318	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1319	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1320
[430]	1321	IF ( i == 10 ) THEN
	1322	EXIT
	1323	ELSE
	1324	i = i + 1
	1325	ENDIF
	1326
[1]	1327	ENDDO
	1328
	1329	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1330	TRIM( gradients ), TRIM( slices )
	1331
	1332	!
	1333	!-- Initial humidity profile
	1334	!-- Building output strings, starting with surface humidity
[75]	1335	IF ( humidity .OR. passive_scalar ) THEN
[1]	1336	WRITE ( temperatures, '(E8.1)' ) q_surface
	1337	gradients = '--------'
	1338	slices = ' 0'
	1339	coordinates = ' 0.0'
	1340	i = 1
	1341	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1342
	1343	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1344	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1345
	1346	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1347	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1348
	1349	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1350	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1351
	1352	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1353	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1354
[430]	1355	IF ( i == 10 ) THEN
	1356	EXIT
	1357	ELSE
	1358	i = i + 1
	1359	ENDIF
	1360
[1]	1361	ENDDO
	1362
[75]	1363	IF ( humidity ) THEN
[1]	1364	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1365	TRIM( gradients ), TRIM( slices )
	1366	ELSE
	1367	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1368	TRIM( gradients ), TRIM( slices )
	1369	ENDIF
	1370	ENDIF
	1371
	1372	!
[97]	1373	!-- Initial salinity profile
	1374	!-- Building output strings, starting with surface salinity
	1375	IF ( ocean ) THEN
	1376	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1377	gradients = '------'
	1378	slices = ' 0'
	1379	coordinates = ' 0.0'
	1380	i = 1
	1381	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1382
	1383	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1384	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1385
	1386	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1387	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1388
	1389	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1390	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1391
	1392	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1393	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1394
[430]	1395	IF ( i == 10 ) THEN
	1396	EXIT
	1397	ELSE
	1398	i = i + 1
	1399	ENDIF
	1400
[97]	1401	ENDDO
	1402
	1403	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1404	TRIM( gradients ), TRIM( slices )
	1405	ENDIF
	1406
	1407	!
[411]	1408	!-- Profile for the large scale vertial velocity
	1409	!-- Building output strings, starting with surface value
	1410	IF ( large_scale_subsidence ) THEN
	1411	temperatures = ' 0.0'
	1412	gradients = '------'
	1413	slices = ' 0'
	1414	coordinates = ' 0.0'
	1415	i = 1
[580]	1416	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
[411]	1417
	1418	WRITE (coor_chr,'(E10.2,7X)') &
[580]	1419	w_subs(subs_vertical_gradient_level_i(i))
[411]	1420	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1421
[580]	1422	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
[411]	1423	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1424
[580]	1425	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
[411]	1426	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1427
[580]	1428	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
[411]	1429	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1430
[430]	1431	IF ( i == 10 ) THEN
	1432	EXIT
	1433	ELSE
	1434	i = i + 1
	1435	ENDIF
	1436
[411]	1437	ENDDO
	1438
	1439	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1440	TRIM( gradients ), TRIM( slices )
	1441	ENDIF
	1442
	1443	!
[1]	1444	!-- LES / turbulence parameters
	1445	WRITE ( io, 450 )
	1446
	1447	!--
	1448	! ... LES-constants used must still be added here
	1449	!--
	1450	IF ( constant_diffusion ) THEN
	1451	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1452	prandtl_number
	1453	ENDIF
	1454	IF ( .NOT. constant_diffusion) THEN
[108]	1455	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1456	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1457	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1458	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1459	ENDIF
	1460
	1461	!
	1462	!-- Special actions during the run
	1463	WRITE ( io, 470 )
	1464	IF ( create_disturbances ) THEN
	1465	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1466	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1467	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1468	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1469	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1470	ELSE
	1471	WRITE ( io, 473 ) disturbance_energy_limit
	1472	ENDIF
	1473	WRITE ( io, 474 ) TRIM( random_generator )
	1474	ENDIF
	1475	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1476	WRITE ( io, 475 ) pt_surface_initial_change
	1477	ENDIF
[75]	1478	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1479	WRITE ( io, 476 ) q_surface_initial_change
	1480	ENDIF
	1481	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1482	WRITE ( io, 477 ) q_surface_initial_change
	1483	ENDIF
	1484
[60]	1485	IF ( particle_advection ) THEN
[1]	1486	!
[60]	1487	!-- Particle attributes
	1488	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1489	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1490	end_time_prel, dt_sort_particles
[60]	1491	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1492	IF ( random_start_position ) WRITE ( io, 481 )
	1493	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1494	WRITE ( io, 495 ) total_number_of_particles
	1495	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1496	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1497	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1498	WRITE ( io, 484 ) total_number_of_tails, &
	1499	minimum_tailpoint_distance, &
	1500	maximum_tailpoint_age
	1501	ENDIF
[1]	1502	ENDIF
[60]	1503	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1504	WRITE ( io, 485 ) dt_write_particle_data
	1505	output_format = ''
	1506	IF ( netcdf_output ) THEN
[493]	1507	IF ( netcdf_data_format > 1 ) THEN
[60]	1508	output_format = 'netcdf (64 bit offset) and binary'
	1509	ELSE
	1510	output_format = 'netcdf and binary'
	1511	ENDIF
[1]	1512	ELSE
[60]	1513	output_format = 'binary'
[1]	1514	ENDIF
[292]	1515	WRITE ( io, 344 ) output_format
[1]	1516	ENDIF
[60]	1517	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1518	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1519
[60]	1520	WRITE ( io, 487 ) number_of_particle_groups
[1]	1521
[60]	1522	DO i = 1, number_of_particle_groups
	1523	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1524	WRITE ( io, 490 ) i, 0.0
	1525	WRITE ( io, 492 )
[1]	1526	ELSE
[60]	1527	WRITE ( io, 490 ) i, radius(i)
	1528	IF ( density_ratio(i) /= 0.0 ) THEN
	1529	WRITE ( io, 491 ) density_ratio(i)
	1530	ELSE
	1531	WRITE ( io, 492 )
	1532	ENDIF
[1]	1533	ENDIF
[60]	1534	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1535	pdx(i), pdy(i), pdz(i)
[336]	1536	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1537	ENDDO
[1]	1538
[60]	1539	ENDIF
[1]	1540
[60]	1541
[1]	1542	!
	1543	!-- Parameters of 1D-model
	1544	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1545	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1546	mixing_length_1d, dissipation_1d
	1547	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1548	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1549	ENDIF
	1550	ENDIF
	1551
	1552	!
	1553	!-- User-defined informations
	1554	CALL user_header( io )
	1555
	1556	WRITE ( io, 99 )
	1557
	1558	!
	1559	!-- Write buffer contents to disc immediately
[82]	1560	CALL local_flush( io )
[1]	1561
	1562	!
	1563	!-- Here the FORMATs start
	1564
	1565	99 FORMAT (1X,78('-'))
[200]	1566	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1567	1X,'* ',A,' *',9X,A/ &
	1568	1X,'***************************',9X,42('-'))
[291]	1569	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1570	37X,42('-'))
[200]	1571	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1572	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1573	' Run on host: ',A10)
[1]	1574	#if defined( __parallel )
[200]	1575	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1576	')',1X,A)
[200]	1577	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1578	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1579	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1580	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1581	37X,'because the job is running on an SMP-cluster')
[102]	1582	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1583	#endif
	1584	110 FORMAT (/' Numerical Schemes:'/ &
	1585	' -----------------'/)
	1586	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1587	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1588	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1589	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1590	' or Upstream')
	1591	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1592	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1593	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1594	' or Upstream')
	1595	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1596	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1597	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1598	' Translation velocity = ',A/ &
	1599	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1600	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1601	' of timestep changes)')
	1602	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1603	' timestep changes')
	1604	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1605	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1606	' maximum damping coefficient: ',F5.3, ' 1/s')
	1607	124 FORMAT (' Spline-overshoots are being suppressed')
	1608	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1609	' of'/ &
	1610	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1611	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1612	' of'/ &
	1613	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1614	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1615	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1616	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1617	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1618	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1619	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1620	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1621	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1622	' effective emissivity scheme')
	1623	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1624	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1625	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1626	A,'-cycle)'/ &
	1627	' number of grid levels: ',I2/ &
	1628	' Gauss-Seidel red/black iterations: ',I2)
	1629	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1630	I3,')')
	1631	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1632	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1633	I3,')'/ &
	1634	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1635	I3,')')
	1636	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1637	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1638	140 FORMAT (' maximum residual allowed: ',E10.3)
	1639	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1640	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1641	'step')
[87]	1642	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1643	'kinetic energy')
[1]	1644	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1645	'conserved'/ &
	1646	' using the ',A,' mode')
	1647	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1648	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1649	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1650	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1651	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1652	'prognostic equation for')
	1653	154 FORMAT (' the potential temperature')
[1]	1654	200 FORMAT (//' Run time and time step information:'/ &
	1655	' ----------------------------------'/)
	1656	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1657	' CFL-factor: ',F4.2)
	1658	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1659	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1660	' End time: ',F9.3,' s')
	1661	204 FORMAT ( A,F9.3,' s')
	1662	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1663	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1664	' CPU-time used: ',F9.3,' s per timestep: ', &
	1665	' ',F9.3,' s'/ &
	1666	' per second of simulated tim', &
	1667	'e: ',F9.3,' s')
[291]	1668	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1669	250 FORMAT (//' Computational grid and domain size:'/ &
	1670	' ----------------------------------'// &
	1671	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1672	' m dz = ',F7.3,' m'/ &
	1673	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1674	' m z(u) = ',F10.3,' m'/)
	1675	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1676	' factor: ',F5.3/ &
	1677	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1678	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1679	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1680	255 FORMAT (' Subdomains have equal size')
	1681	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1682	'have smaller sizes'/ &
	1683	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1684	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1685	' degrees')
	1686	270 FORMAT (//' Topography informations:'/ &
	1687	' -----------------------'// &
	1688	1X,'Topography: ',A)
	1689	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1690	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1691	' / ',I4)
[240]	1692	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1693	' direction' / &
	1694	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1695	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1696	278 FORMAT (' Topography grid definition convention:'/ &
	1697	' cell edge (staggered grid points'/ &
	1698	' (u in x-direction, v in y-direction))' /)
	1699	279 FORMAT (' Topography grid definition convention:'/ &
	1700	' cell center (scalar grid points)' /)
[138]	1701	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1702	' ------------------------------'// &
	1703	' Canopy mode: ', A / &
	1704	' Canopy top: ',I4 / &
	1705	' Leaf drag coefficient: ',F6.2 /)
[153]	1706	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1707	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1708	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1709	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1710	' Height: ',A,' m'/ &
	1711	' Leaf area density: ',A,' m2/m3'/ &
	1712	' Gradient: ',A,' m2/m4'/ &
	1713	' Gridpoint: ',A)
	1714
[1]	1715	300 FORMAT (//' Boundary conditions:'/ &
	1716	' -------------------'// &
	1717	' p uv ', &
	1718	' pt'// &
	1719	' B. bound.: ',A/ &
	1720	' T. bound.: ',A)
[97]	1721	301 FORMAT (/' ',A// &
[1]	1722	' B. bound.: ',A/ &
	1723	' T. bound.: ',A)
[19]	1724	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1725	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1726	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1727	'computational u,v-level:'// &
[1]	1728	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1729	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1730	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1731	307 FORMAT (' Heatflux has a random normal distribution')
	1732	308 FORMAT (' Predefined surface temperature')
[97]	1733	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1734	310 FORMAT (//' 1D-Model:'// &
	1735	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1736	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1737	312 FORMAT (' Predefined surface humidity')
	1738	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1739	314 FORMAT (' Predefined scalar value at the surface')
[19]	1740	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1741	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1742	'atmosphere model')
[1]	1743	317 FORMAT (//' Lateral boundaries:'/ &
	1744	' left/right: ',A/ &
	1745	' north/south: ',A)
	1746	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1747	'max =',F5.1,' m**2/s')
[151]	1748	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1749	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1750	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1751	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1752	' v: ',F9.6,' m2/s2')
[151]	1753	325 FORMAT (//' List output:'/ &
[1]	1754	' -----------'// &
	1755	' 1D-Profiles:'/ &
	1756	' Output every ',F8.2,' s')
[151]	1757	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1758	' Averaging input every ',F8.2,' s')
	1759	330 FORMAT (//' Data output:'/ &
	1760	' -----------'/)
	1761	331 FORMAT (/' 1D-Profiles:')
	1762	332 FORMAT (/' ',A)
	1763	333 FORMAT (' Output every ',F8.2,' s',/ &
	1764	' Time averaged over ',F8.2,' s'/ &
	1765	' Averaging input every ',F8.2,' s')
	1766	334 FORMAT (/' 2D-Arrays',A,':')
	1767	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1768	' Output every ',F8.2,' s ',A/ &
	1769	' Cross sections at ',A1,' = ',A/ &
	1770	' scalar-coordinates: ',A,' m'/)
	1771	336 FORMAT (/' 3D-Arrays',A,':')
	1772	337 FORMAT (/' Arrays: ',A/ &
	1773	' Output every ',F8.2,' s ',A/ &
	1774	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1775	338 FORMAT (' Compressed data output'/ &
	1776	' Decimal precision: ',A/)
	1777	339 FORMAT (' No output during initial ',F8.2,' s')
	1778	340 FORMAT (/' Time series:')
	1779	341 FORMAT (' Output every ',F8.2,' s'/)
	1780	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1781	' Output every ',F8.2,' s ',A/ &
	1782	' Time averaged over ',F8.2,' s'/ &
	1783	' Averaging input every ',F8.2,' s'/ &
	1784	' Cross sections at ',A1,' = ',A/ &
	1785	' scalar-coordinates: ',A,' m'/)
	1786	343 FORMAT (/' Arrays: ',A/ &
	1787	' Output every ',F8.2,' s ',A/ &
	1788	' Time averaged over ',F8.2,' s'/ &
	1789	' Averaging input every ',F8.2,' s'/ &
	1790	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1791	344 FORMAT (' Output format: ',A/)
[410]	1792	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1793	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1794	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1795	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1796	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1797	347 FORMAT (' Variables: ',A/ &
	1798	' Output every ',F8.2,' s')
	1799	348 FORMAT (' Variables: ',A/ &
	1800	' Output every ',F8.2,' s'/ &
	1801	' Time averaged over ',F8.2,' s'/ &
	1802	' Averaging input every ',F8.2,' s')
	1803	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1804	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1805	13(' ',8(F8.2,',')/) )
	1806	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1807	'all gridpoints along ',A,'-direction (default).' )
	1808	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1809	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1810	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1811	#if defined( __dvrp_graphics )
	1812	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1813	' Output every ',F7.1,' s'/ &
	1814	' Output mode: ',A/ &
	1815	' Host / User: ',A,' / ',A/ &
	1816	' Directory: ',A// &
	1817	' The sequence contains:')
[337]	1818	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1819	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1820	362 FORMAT (/' Slicer plane ',A/ &
[336]	1821	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1822	363 FORMAT (/' Particles'/ &
[336]	1823	' particle size: ',F7.2,' m')
	1824	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1825	F6.2,',',F6.2,']')
[337]	1826	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1827	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1828	')'/ &
	1829	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1830	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1831	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1832	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1833	#endif
	1834	#if defined( __spectra )
	1835	370 FORMAT (' Spectra:')
	1836	371 FORMAT (' Output every ',F7.1,' s'/)
	1837	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1838	' Directions: ', 10(A5,',')/ &
[189]	1839	' height levels k = ', 20(I3,',')/ &
	1840	' ', 20(I3,',')/ &
	1841	' ', 20(I3,',')/ &
	1842	' ', 20(I3,',')/ &
	1843	' ', 19(I3,','),I3,'.'/ &
[1]	1844	' height levels selected for standard plot:'/ &
[189]	1845	' k = ', 20(I3,',')/ &
	1846	' ', 20(I3,',')/ &
	1847	' ', 20(I3,',')/ &
	1848	' ', 20(I3,',')/ &
	1849	' ', 19(I3,','),I3,'.'/ &
[1]	1850	' Time averaged over ', F7.1, ' s,' / &
	1851	' Profiles for the time averaging are taken every ', &
	1852	F6.1,' s')
	1853	#endif
	1854	400 FORMAT (//' Physical quantities:'/ &
	1855	' -------------------'/)
	1856	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1857	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1858	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1859	' f* = ',F9.6,' 1/s')
	1860	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1861	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1862	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1863	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1864	' ------------------------'/)
[57]	1865	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1866	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1867	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1868	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1869	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1870	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1871	' Height: ',A,' m'/ &
	1872	' Temperature: ',A,' K'/ &
	1873	' Gradient: ',A,' K/100m'/ &
	1874	' Gridpoint: ',A)
	1875	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1876	' Height: ',A,' m'/ &
	1877	' Humidity: ',A,' kg/kg'/ &
	1878	' Gradient: ',A,' (kg/kg)/100m'/ &
	1879	' Gridpoint: ',A)
	1880	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1881	' Height: ',A,' m'/ &
	1882	' Scalar concentration: ',A,' kg/m**3'/ &
	1883	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1884	' Gridpoint: ',A)
	1885	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1886	' Height: ',A,' m'/ &
	1887	' ug: ',A,' m/s'/ &
	1888	' Gradient: ',A,' 1/100s'/ &
	1889	' Gridpoint: ',A)
	1890	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1891	' Height: ',A,' m'/ &
[97]	1892	' vg: ',A,' m/s'/ &
[1]	1893	' Gradient: ',A,' 1/100s'/ &
	1894	' Gridpoint: ',A)
[97]	1895	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1896	' Height: ',A,' m'/ &
	1897	' Salinity: ',A,' psu'/ &
	1898	' Gradient: ',A,' psu/100m'/ &
	1899	' Gridpoint: ',A)
[411]	1900	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1901	' Height: ',A,' m'/ &
	1902	' w_subs: ',A,' m/s'/ &
	1903	' Gradient: ',A,' (m/s)/100m'/ &
	1904	' Gridpoint: ',A)
[1]	1905	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1906	' ---------------------------'/)
	1907	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1908	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1909	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1910	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1911	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1912	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1913	470 FORMAT (//' Actions during the simulation:'/ &
	1914	' -----------------------------'/)
[94]	1915	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1916	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1917	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1918	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1919	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1920	' to i/j =',I4)
	1921	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1922	1X,F5.3, ' m2/s2')
	1923	474 FORMAT (' Random number generator used : ',A/)
	1924	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1925	'respectively, if'/ &
	1926	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1927	' 3D-simulation'/)
	1928	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1929	'respectively, if the'/ &
	1930	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1931	' the 3D-simulation'/)
	1932	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1933	'respectively, if the'/ &
	1934	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1935	' the 3D-simulation'/)
	1936	480 FORMAT (' Particles:'/ &
	1937	' ---------'// &
	1938	' Particle advection is active (switched on at t = ', F7.1, &
	1939	' s)'/ &
	1940	' Start of new particle generations every ',F6.1,' s'/ &
	1941	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1942	' bottom: ', A, ' top: ', A/&
	1943	' Maximum particle age: ',F9.1,' s'/ &
[117]	1944	' Advection stopped at t = ',F9.1,' s'/ &
	1945	' Particles are sorted every ',F9.1,' s'/)
[1]	1946	481 FORMAT (' Particles have random start positions'/)
[336]	1947	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1948	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1949	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1950	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1951	' Maximum age of the end of the tail: ',F8.2,' s')
	1952	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1953	486 FORMAT (' Particle statistics are written on file'/)
	1954	487 FORMAT (' Number of particle groups: ',I2/)
	1955	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1956	' minimum timestep for advection: ', F7.5/)
	1957	489 FORMAT (' Number of particles simultaneously released at each ', &
	1958	'point: ', I5/)
	1959	490 FORMAT (' Particle group ',I2,':'/ &
	1960	' Particle radius: ',E10.3, 'm')
	1961	491 FORMAT (' Particle inertia is activated'/ &
	1962	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1963	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1964	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1965	' y:',F8.1,' - ',F8.1,' m'/&
	1966	' z:',F8.1,' - ',F8.1,' m'/&
	1967	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1968	' m dz = ',F8.1,' m'/)
	1969	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1970	F8.2,' s'/)
	1971	495 FORMAT (' Number of particles in total domain: ',I10/)
	1972	500 FORMAT (//' 1D-Model parameters:'/ &
	1973	' -------------------'// &
	1974	' Simulation time: ',F8.1,' s'/ &
	1975	' Run-controll output every: ',F8.1,' s'/ &
	1976	' Vertical profile output every: ',F8.1,' s'/ &
	1977	' Mixing length calculation: ',A/ &
	1978	' Dissipation calculation: ',A/)
	1979	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1980
	1981
	1982	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |