Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 562

Last change on this file since 562 was 494, checked in by raasch, 15 years ago
last commit documented; configuration example file for netcdf4 added
Property svn:keywords set to `Id`
File size: 76.3 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[494]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 494 2010-03-01 12:23:32Z raasch $
	11	!
[494]	12	! 493 2010-03-01 08:30:24Z raasch
	13	! NetCDF data output format extendend for NetCDF4/HDF5
	14	!
[482]	15	! 449 2010-02-02 11:23:59Z raasch
	16	! +large scale vertical motion (subsidence/ascent)
	17	! Bugfix: index problem concerning gradient_level indices removed
	18	!
[449]	19	! 410 2009-12-04 17:05:40Z letzel
	20	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
[493]	21	! mask_scale\|_x\|y\|z, masks, skip_time_domask
[449]	22	!
[392]	23	! 346 2009-07-06 10:13:41Z raasch
[328]	24	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	25	! Coupling with independent precursor runs.
[254]	26	! Output of messages replaced by message handling routine.
[336]	27	! Output of several additional dvr parameters
[240]	28	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	29	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	30	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	31	! topography_grid_convention moved from user_header
[292]	32	! small bugfix concerning 3d 64bit netcdf output format
[1]	33	!
[226]	34	! 206 2008-10-13 14:59:11Z raasch
	35	! Bugfix: error in zu index in case of section_xy = -1
	36	!
[200]	37	! 198 2008-09-17 08:55:28Z raasch
	38	! Format adjustments allowing output of larger revision numbers
	39	!
[198]	40	! 197 2008-09-16 15:29:03Z raasch
	41	! allow 100 spectra levels instead of 10 for consistency with
	42	! define_netcdf_header,
	43	! bugfix in the output of the characteristic levels of potential temperature,
	44	! geostrophic wind, scalar concentration, humidity and leaf area density,
	45	! output of turbulence recycling informations
	46	!
[139]	47	! 138 2007-11-28 10:03:58Z letzel
	48	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	49	! Allow two instead of one digit to specify isosurface and slicer variables.
	50	! Output of sorting frequency of particles
	51	!
[110]	52	! 108 2007-08-24 15:10:38Z letzel
	53	! Output of informations for coupled model runs (boundary conditions etc.)
	54	! + output of momentumfluxes at the top boundary
	55	! Rayleigh damping for ocean, e_init
	56	!
[98]	57	! 97 2007-06-21 08:23:15Z raasch
	58	! Adjustments for the ocean version.
	59	! use_pt_reference renamed use_reference
	60	!
[90]	61	! 87 2007-05-22 15:46:47Z raasch
	62	! Bugfix: output of use_upstream_for_tke
	63	!
[83]	64	! 82 2007-04-16 15:40:52Z raasch
	65	! Preprocessor strings for different linux clusters changed to "lc",
	66	! routine local_flush is used for buffer flushing
	67	!
[77]	68	! 76 2007-03-29 00:58:32Z raasch
	69	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	70	! output of the loop optimization method, moisture renamed humidity,
	71	! output of subversion revision number
	72	!
[39]	73	! 19 2007-02-23 04:53:48Z raasch
	74	! Output of scalar flux applied at top boundary
	75	!
[3]	76	! RCS Log replace by Id keyword, revision history cleaned up
	77	!
[1]	78	! Revision 1.63 2006/08/22 13:53:13 raasch
	79	! Output of dz_max
	80	!
	81	! Revision 1.1 1997/08/11 06:17:20 raasch
	82	! Initial revision
	83	!
	84	!
	85	! Description:
	86	! ------------
	87	! Writing a header with all important informations about the actual run.
	88	! This subroutine is called three times, two times at the beginning
	89	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	90	! end of the run, then writing additional information about CPU-usage on file
	91	! header.
[411]	92	!-----------------------------------------------------------------------------!
[1]	93
	94	USE arrays_3d
	95	USE control_parameters
	96	USE cloud_parameters
	97	USE cpulog
	98	USE dvrp_variables
	99	USE grid_variables
	100	USE indices
	101	USE model_1d
	102	USE particle_attributes
	103	USE pegrid
[411]	104	USE subsidence_mod
[1]	105	USE spectrum
	106
	107	IMPLICIT NONE
	108
	109	CHARACTER (LEN=1) :: prec
	110	CHARACTER (LEN=2) :: do2d_mode
	111	CHARACTER (LEN=5) :: section_chr
	112	CHARACTER (LEN=9) :: time_to_string
	113	CHARACTER (LEN=10) :: coor_chr, host_chr
	114	CHARACTER (LEN=16) :: begin_chr
[200]	115	CHARACTER (LEN=23) :: ver_rev
[1]	116	CHARACTER (LEN=40) :: output_format
[167]	117	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	118	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	119	domask_chr, run_classification
[167]	120	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	121	temperatures, ugcomponent, vgcomponent
[1]	122	CHARACTER (LEN=85) :: roben, runten
	123
[410]	124	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	125
	126	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	127	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	128	REAL :: cpuseconds_per_simulated_second
	129
	130	!
	131	!-- Open the output file. At the end of the simulation, output is directed
	132	!-- to unit 19.
	133	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	134	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	135	io = 15 ! header output on file RUN_CONTROL
	136	ELSE
	137	io = 19 ! header output on file HEADER
	138	ENDIF
	139	CALL check_open( io )
	140
	141	!
	142	!-- At the end of the run, output file (HEADER) will be rewritten with
	143	!-- new informations
	144	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	145
	146	!
	147	!-- Determine kind of model run
	148	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	149	run_classification = '3D - restart run'
[328]	150	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	151	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	152	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	153	run_classification = '3D - run without 1D - prerun'
[197]	154	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	155	run_classification = '3D - run with 1D - prerun'
[197]	156	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	157	run_classification = '3D - run initialized by user'
[1]	158	ELSE
[254]	159	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	160	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	161	ENDIF
[97]	162	IF ( ocean ) THEN
	163	run_classification = 'ocean - ' // run_classification
	164	ELSE
	165	run_classification = 'atmosphere - ' // run_classification
	166	ENDIF
[1]	167
	168	!
	169	!-- Run-identification, date, time, host
	170	host_chr = host(1:10)
[75]	171	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	172	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	173	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	174	#if defined( __mpi2 )
	175	mpi_type = 2
	176	#else
	177	mpi_type = 1
	178	#endif
	179	WRITE ( io, 101 ) mpi_type, coupling_mode
	180	ENDIF
[102]	181	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	182	ADJUSTR( host_chr )
[1]	183	#if defined( __parallel )
	184	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	185	char1 = 'calculated'
	186	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	187	host(1:2) == 'lc' ) .AND. &
	188	npex == -1 .AND. pdims(2) == 1 ) THEN
	189	char1 = 'forced'
	190	ELSE
	191	char1 = 'predefined'
	192	ENDIF
	193	IF ( threads_per_task == 1 ) THEN
[102]	194	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	195	ELSE
[102]	196	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	197	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	198	ENDIF
	199	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	200	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	201	npex == -1 .AND. pdims(2) == 1 ) &
	202	THEN
[102]	203	WRITE ( io, 106 )
[1]	204	ELSEIF ( pdims(2) == 1 ) THEN
[102]	205	WRITE ( io, 107 ) 'x'
[1]	206	ELSEIF ( pdims(1) == 1 ) THEN
[102]	207	WRITE ( io, 107 ) 'y'
[1]	208	ENDIF
[102]	209	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	210	#endif
	211	WRITE ( io, 99 )
	212
	213	!
	214	!-- Numerical schemes
	215	WRITE ( io, 110 )
	216	IF ( psolver(1:7) == 'poisfft' ) THEN
	217	WRITE ( io, 111 ) TRIM( fft_method )
	218	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	219	ELSEIF ( psolver == 'sor' ) THEN
	220	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	221	ELSEIF ( psolver == 'multigrid' ) THEN
	222	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	223	IF ( mg_cycles == -1 ) THEN
	224	WRITE ( io, 140 ) residual_limit
	225	ELSE
	226	WRITE ( io, 141 ) mg_cycles
	227	ENDIF
	228	IF ( mg_switch_to_pe0_level == 0 ) THEN
	229	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	230	nzt_mg(1)
[197]	231	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	232	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	233	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	234	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	235	nzt_mg(mg_switch_to_pe0_level), &
	236	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	237	nzt_mg(1)
	238	ENDIF
	239	ENDIF
	240	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	241	THEN
	242	WRITE ( io, 142 )
	243	ENDIF
	244
	245	IF ( momentum_advec == 'pw-scheme' ) THEN
	246	WRITE ( io, 113 )
	247	ELSE
	248	WRITE ( io, 114 )
	249	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	250	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	251	overshoot_limit_w /= 0.0 ) THEN
	252	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	253	overshoot_limit_w
	254	ENDIF
	255	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	256	ups_limit_w /= 0.0 ) &
	257	THEN
	258	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	259	ENDIF
	260	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	261	ENDIF
	262	IF ( scalar_advec == 'pw-scheme' ) THEN
	263	WRITE ( io, 116 )
	264	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	265	WRITE ( io, 117 )
	266	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	267	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	268	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	269	ENDIF
	270	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	271	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	272	ENDIF
	273	ELSE
	274	WRITE ( io, 118 )
	275	ENDIF
[63]	276
	277	WRITE ( io, 139 ) TRIM( loop_optimization )
	278
[1]	279	IF ( galilei_transformation ) THEN
	280	IF ( use_ug_for_galilei_tr ) THEN
	281	char1 = 'geostrophic wind'
	282	ELSE
	283	char1 = 'mean wind in model domain'
	284	ENDIF
	285	IF ( simulated_time_at_begin == simulated_time ) THEN
	286	char2 = 'at the start of the run'
	287	ELSE
	288	char2 = 'at the end of the run'
	289	ENDIF
	290	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	291	advected_distance_x/1000.0, advected_distance_y/1000.0
	292	ENDIF
	293	IF ( timestep_scheme == 'leapfrog' ) THEN
	294	WRITE ( io, 120 )
	295	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	296	WRITE ( io, 121 )
	297	ELSE
	298	WRITE ( io, 122 ) timestep_scheme
	299	ENDIF
[87]	300	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	301	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	302	IF ( .NOT. ocean ) THEN
	303	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	304	rayleigh_damping_factor
	305	ELSE
	306	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	307	rayleigh_damping_factor
	308	ENDIF
[1]	309	ENDIF
[75]	310	IF ( humidity ) THEN
[1]	311	IF ( .NOT. cloud_physics ) THEN
	312	WRITE ( io, 129 )
	313	ELSE
	314	WRITE ( io, 130 )
	315	WRITE ( io, 131 )
	316	IF ( radiation ) WRITE ( io, 132 )
	317	IF ( precipitation ) WRITE ( io, 133 )
	318	ENDIF
	319	ENDIF
	320	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	321	IF ( conserve_volume_flow ) THEN
[241]	322	WRITE ( io, 150 ) conserve_volume_flow_mode
	323	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	324	WRITE ( io, 151 ) u_bulk, v_bulk
	325	ENDIF
[240]	326	ELSEIF ( dp_external ) THEN
	327	IF ( dp_smooth ) THEN
[241]	328	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	329	ELSE
[241]	330	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	331	ENDIF
	332	ENDIF
[411]	333	IF ( large_scale_subsidence ) THEN
	334	WRITE ( io, 153 )
	335	WRITE ( io, 154 )
	336	ENDIF
[1]	337	WRITE ( io, 99 )
	338
	339	!
	340	!-- Runtime and timestep informations
	341	WRITE ( io, 200 )
	342	IF ( .NOT. dt_fixed ) THEN
	343	WRITE ( io, 201 ) dt_max, cfl_factor
	344	ELSE
	345	WRITE ( io, 202 ) dt
	346	ENDIF
	347	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	348
	349	IF ( time_restart /= 9999999.9 .AND. &
	350	simulated_time_at_begin == simulated_time ) THEN
	351	IF ( dt_restart == 9999999.9 ) THEN
	352	WRITE ( io, 204 ) ' Restart at: ',time_restart
	353	ELSE
	354	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	355	ENDIF
	356	ENDIF
	357
	358	IF ( simulated_time_at_begin /= simulated_time ) THEN
	359	i = MAX ( log_point_s(10)%counts, 1 )
	360	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	361	cpuseconds_per_simulated_second = 0.0
	362	ELSE
	363	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	364	( simulated_time - &
	365	simulated_time_at_begin )
	366	ENDIF
	367	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	368	log_point_s(10)%sum / REAL( i ), &
	369	cpuseconds_per_simulated_second
	370	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	371	IF ( dt_restart == 9999999.9 ) THEN
	372	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	373	ELSE
	374	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	375	ENDIF
	376	ENDIF
	377	ENDIF
	378
	379	!
[291]	380	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	381	!-- and ocean are used. In this case, coupling_start_time defines the time
	382	!-- when the coupling is switched on.
	383	IF ( coupling_start_time /= 0.0 ) THEN
	384	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	385	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	386	ELSE
	387	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	388	'precursor runs'
	389	ENDIF
	390	WRITE ( io, 207 ) char1, coupling_start_time
	391	ENDIF
	392
	393	!
[1]	394	!-- Computational grid
[94]	395	IF ( .NOT. ocean ) THEN
	396	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	397	IF ( dz_stretch_level_index < nzt+1 ) THEN
	398	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	399	dz_stretch_factor, dz_max
	400	ENDIF
	401	ELSE
	402	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	403	IF ( dz_stretch_level_index > 0 ) THEN
	404	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	405	dz_stretch_factor, dz_max
	406	ENDIF
[1]	407	ENDIF
	408	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	409	MIN( nnz+2, nzt+2 )
[76]	410	IF ( numprocs > 1 ) THEN
	411	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	412	WRITE ( io, 255 )
	413	ELSE
	414	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	415	ENDIF
[1]	416	ENDIF
	417	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	418
	419	!
	420	!-- Topography
	421	WRITE ( io, 270 ) topography
	422	SELECT CASE ( TRIM( topography ) )
	423
	424	CASE ( 'flat' )
	425	! no actions necessary
	426
	427	CASE ( 'single_building' )
	428	blx = INT( building_length_x / dx )
	429	bly = INT( building_length_y / dy )
	430	bh = INT( building_height / dz )
	431
	432	IF ( building_wall_left == 9999999.9 ) THEN
	433	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	434	ENDIF
	435	bxl = INT ( building_wall_left / dx + 0.5 )
	436	bxr = bxl + blx
	437
	438	IF ( building_wall_south == 9999999.9 ) THEN
	439	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	440	ENDIF
	441	bys = INT ( building_wall_south / dy + 0.5 )
	442	byn = bys + bly
	443
	444	WRITE ( io, 271 ) building_length_x, building_length_y, &
	445	building_height, bxl, bxr, bys, byn
	446
[240]	447	CASE ( 'single_street_canyon' )
	448	ch = NINT( canyon_height / dz )
	449	IF ( canyon_width_x /= 9999999.9 ) THEN
	450	!
	451	!-- Street canyon in y direction
	452	cwx = NINT( canyon_width_x / dx )
	453	IF ( canyon_wall_left == 9999999.9 ) THEN
	454	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	455	ENDIF
	456	cxl = NINT( canyon_wall_left / dx )
	457	cxr = cxl + cwx
	458	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	459
	460	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	461	!
	462	!-- Street canyon in x direction
	463	cwy = NINT( canyon_width_y / dy )
	464	IF ( canyon_wall_south == 9999999.9 ) THEN
	465	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	466	ENDIF
	467	cys = NINT( canyon_wall_south / dy )
	468	cyn = cys + cwy
	469	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	470	ENDIF
	471
[1]	472	END SELECT
	473
[256]	474	IF ( TRIM( topography ) /= 'flat' ) THEN
	475	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	476	IF ( TRIM( topography ) == 'single_building' .OR. &
	477	TRIM( topography ) == 'single_street_canyon' ) THEN
	478	WRITE ( io, 278 )
	479	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	480	WRITE ( io, 279 )
	481	ENDIF
	482	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	483	WRITE ( io, 278 )
	484	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	485	WRITE ( io, 279 )
	486	ENDIF
	487	ENDIF
	488
[138]	489	IF ( plant_canopy ) THEN
	490
	491	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	492	IF ( passive_scalar ) THEN
	493	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	494	leaf_surface_concentration
	495	ENDIF
[138]	496
[1]	497	!
[153]	498	!-- Heat flux at the top of vegetation
	499	WRITE ( io, 282 ) cthf
	500
	501	!
[138]	502	!-- Leaf area density profile
	503	!-- Building output strings, starting with surface value
	504	WRITE ( learde, '(F6.2)' ) lad_surface
	505	gradients = '------'
	506	slices = ' 0'
	507	coordinates = ' 0.0'
	508	i = 1
	509	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	510
	511	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	512	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	513
	514	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	515	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	516
	517	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	518	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	519
	520	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	521	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	522
	523	i = i + 1
	524	ENDDO
	525
[153]	526	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	527	TRIM( gradients ), TRIM( slices )
	528
	529	ENDIF
	530
	531	!
[1]	532	!-- Boundary conditions
	533	IF ( ibc_p_b == 0 ) THEN
	534	runten = 'p(0) = 0 \|'
	535	ELSEIF ( ibc_p_b == 1 ) THEN
	536	runten = 'p(0) = p(1) \|'
	537	ELSE
	538	runten = 'p(0) = p(1) +R\|'
	539	ENDIF
	540	IF ( ibc_p_t == 0 ) THEN
	541	roben = 'p(nzt+1) = 0 \|'
	542	ELSE
	543	roben = 'p(nzt+1) = p(nzt) \|'
	544	ENDIF
	545
	546	IF ( ibc_uv_b == 0 ) THEN
	547	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	548	ELSE
	549	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	550	ENDIF
[132]	551	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	552	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	553	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	554	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	555	ELSE
	556	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	557	ENDIF
	558
	559	IF ( ibc_pt_b == 0 ) THEN
	560	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	561	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	562	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	563	ELSEIF ( ibc_pt_b == 2 ) THEN
	564	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	565	ENDIF
	566	IF ( ibc_pt_t == 0 ) THEN
[19]	567	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	568	ELSEIF( ibc_pt_t == 1 ) THEN
	569	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	570	ELSEIF( ibc_pt_t == 2 ) THEN
	571	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	572	ENDIF
	573
	574	WRITE ( io, 300 ) runten, roben
	575
	576	IF ( .NOT. constant_diffusion ) THEN
	577	IF ( ibc_e_b == 1 ) THEN
	578	runten = 'e(0) = e(1)'
	579	ELSE
	580	runten = 'e(0) = e(1) = (u/0.1)*2'
	581	ENDIF
	582	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	583
[97]	584	WRITE ( io, 301 ) 'e', runten, roben
[1]	585
	586	ENDIF
	587
[97]	588	IF ( ocean ) THEN
	589	runten = 'sa(0) = sa(1)'
	590	IF ( ibc_sa_t == 0 ) THEN
	591	roben = 'sa(nzt+1) = sa_surface'
[1]	592	ELSE
[97]	593	roben = 'sa(nzt+1) = sa(nzt)'
[1]	594	ENDIF
[97]	595	WRITE ( io, 301 ) 'sa', runten, roben
	596	ENDIF
[1]	597
[97]	598	IF ( humidity ) THEN
	599	IF ( ibc_q_b == 0 ) THEN
	600	runten = 'q(0) = q_surface'
	601	ELSE
	602	runten = 'q(0) = q(1)'
	603	ENDIF
	604	IF ( ibc_q_t == 0 ) THEN
	605	roben = 'q(nzt) = q_top'
	606	ELSE
	607	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	608	ENDIF
	609	WRITE ( io, 301 ) 'q', runten, roben
	610	ENDIF
[1]	611
[97]	612	IF ( passive_scalar ) THEN
	613	IF ( ibc_q_b == 0 ) THEN
	614	runten = 's(0) = s_surface'
	615	ELSE
	616	runten = 's(0) = s(1)'
	617	ENDIF
	618	IF ( ibc_q_t == 0 ) THEN
	619	roben = 's(nzt) = s_top'
	620	ELSE
	621	roben = 's(nzt) = s(nzt-1) + ds/dz'
	622	ENDIF
	623	WRITE ( io, 301 ) 's', runten, roben
[1]	624	ENDIF
	625
	626	IF ( use_surface_fluxes ) THEN
	627	WRITE ( io, 303 )
	628	IF ( constant_heatflux ) THEN
	629	WRITE ( io, 306 ) surface_heatflux
	630	IF ( random_heatflux ) WRITE ( io, 307 )
	631	ENDIF
[75]	632	IF ( humidity .AND. constant_waterflux ) THEN
[1]	633	WRITE ( io, 311 ) surface_waterflux
	634	ENDIF
	635	IF ( passive_scalar .AND. constant_waterflux ) THEN
	636	WRITE ( io, 313 ) surface_waterflux
	637	ENDIF
	638	ENDIF
	639
[19]	640	IF ( use_top_fluxes ) THEN
	641	WRITE ( io, 304 )
[102]	642	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	643	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	644	IF ( constant_top_heatflux ) THEN
	645	WRITE ( io, 306 ) top_heatflux
	646	ENDIF
	647	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	648	WRITE ( io, 316 )
[19]	649	ENDIF
[97]	650	IF ( ocean .AND. constant_top_salinityflux ) THEN
	651	WRITE ( io, 309 ) top_salinityflux
	652	ENDIF
[75]	653	IF ( humidity .OR. passive_scalar ) THEN
[19]	654	WRITE ( io, 315 )
	655	ENDIF
	656	ENDIF
	657
[1]	658	IF ( prandtl_layer ) THEN
[94]	659	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	660	rif_min, rif_max
[1]	661	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	662	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	663	WRITE ( io, 312 )
	664	ENDIF
	665	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	666	WRITE ( io, 314 )
	667	ENDIF
	668	ELSE
	669	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	670	WRITE ( io, 310 ) rif_min, rif_max
	671	ENDIF
	672	ENDIF
	673
	674	WRITE ( io, 317 ) bc_lr, bc_ns
	675	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	676	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	677	IF ( turbulent_inflow ) THEN
	678	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	679	inflow_damping_height, inflow_damping_width
	680	ENDIF
[1]	681	ENDIF
	682
	683	!
	684	!-- Listing of 1D-profiles
[151]	685	WRITE ( io, 325 ) dt_dopr_listing
[1]	686	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	687	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	688	ENDIF
	689
	690	!
	691	!-- DATA output
	692	WRITE ( io, 330 )
	693	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	694	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	695	ENDIF
	696
	697	!
	698	!-- 1D-profiles
[346]	699	dopr_chr = 'Profile:'
[1]	700	IF ( dopr_n /= 0 ) THEN
	701	WRITE ( io, 331 )
	702
	703	output_format = ''
	704	IF ( netcdf_output ) THEN
[493]	705	IF ( netcdf_data_format == 1 ) THEN
	706	output_format = 'NetCDF classic'
[1]	707	ELSE
[493]	708	output_format = 'NetCDF 64bit offset'
[1]	709	ENDIF
	710	ENDIF
	711	IF ( profil_output ) THEN
	712	IF ( netcdf_output ) THEN
	713	output_format = TRIM( output_format ) // ' and profil'
	714	ELSE
	715	output_format = 'profil'
	716	ENDIF
	717	ENDIF
[292]	718	WRITE ( io, 344 ) output_format
[1]	719
	720	DO i = 1, dopr_n
	721	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	722	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	723	WRITE ( io, 332 ) dopr_chr
	724	dopr_chr = ' :'
	725	ENDIF
	726	ENDDO
	727
	728	IF ( dopr_chr /= '' ) THEN
	729	WRITE ( io, 332 ) dopr_chr
	730	ENDIF
	731	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	732	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	733	ENDIF
	734
	735	!
	736	!-- 2D-arrays
	737	DO av = 0, 1
	738
	739	i = 1
	740	do2d_xy = ''
	741	do2d_xz = ''
	742	do2d_yz = ''
	743	DO WHILE ( do2d(av,i) /= ' ' )
	744
	745	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	746	do2d_mode = do2d(av,i)(l-1:l)
	747
	748	SELECT CASE ( do2d_mode )
	749	CASE ( 'xy' )
	750	ll = LEN_TRIM( do2d_xy )
	751	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	752	CASE ( 'xz' )
	753	ll = LEN_TRIM( do2d_xz )
	754	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	755	CASE ( 'yz' )
	756	ll = LEN_TRIM( do2d_yz )
	757	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	758	END SELECT
	759
	760	i = i + 1
	761
	762	ENDDO
	763
	764	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	765	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	766	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	767	( netcdf_output .OR. iso2d_output ) ) THEN
	768
	769	IF ( av == 0 ) THEN
	770	WRITE ( io, 334 ) ''
	771	ELSE
	772	WRITE ( io, 334 ) '(time-averaged)'
	773	ENDIF
	774
	775	IF ( do2d_at_begin ) THEN
	776	begin_chr = 'and at the start'
	777	ELSE
	778	begin_chr = ''
	779	ENDIF
	780
	781	output_format = ''
	782	IF ( netcdf_output ) THEN
[493]	783	IF ( netcdf_data_format == 1 ) THEN
	784	output_format = 'NetCDF classic'
	785	ELSEIF ( netcdf_data_format == 2 ) THEN
	786	output_format = 'NetCDF 64bit offset'
	787	ELSEIF ( netcdf_data_format == 3 ) THEN
	788	output_format = 'NetCDF4/HDF5'
	789	ELSEIF ( netcdf_data_format == 4 ) THEN
	790	output_format = 'NetCDF4/HDF5 clasic'
[1]	791	ENDIF
	792	ENDIF
	793	IF ( iso2d_output ) THEN
	794	IF ( netcdf_output ) THEN
	795	output_format = TRIM( output_format ) // ' and iso2d'
	796	ELSE
	797	output_format = 'iso2d'
	798	ENDIF
	799	ENDIF
[292]	800	WRITE ( io, 344 ) output_format
[1]	801
	802	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	803	i = 1
	804	slices = '/'
	805	coordinates = '/'
	806	!
	807	!-- Building strings with index and coordinate informations of the
	808	!-- slices
	809	DO WHILE ( section(i,1) /= -9999 )
	810
	811	WRITE (section_chr,'(I5)') section(i,1)
	812	section_chr = ADJUSTL( section_chr )
	813	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	814
[206]	815	IF ( section(i,1) == -1 ) THEN
	816	WRITE (coor_chr,'(F10.1)') -1.0
	817	ELSE
	818	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	819	ENDIF
[1]	820	coor_chr = ADJUSTL( coor_chr )
	821	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	822
	823	i = i + 1
	824	ENDDO
	825	IF ( av == 0 ) THEN
	826	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	827	TRIM( begin_chr ), 'k', TRIM( slices ), &
	828	TRIM( coordinates )
	829	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	830	WRITE ( io, 339 ) skip_time_do2d_xy
	831	ENDIF
	832	ELSE
	833	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	834	TRIM( begin_chr ), averaging_interval, &
	835	dt_averaging_input, 'k', TRIM( slices ), &
	836	TRIM( coordinates )
	837	IF ( skip_time_data_output_av /= 0.0 ) THEN
	838	WRITE ( io, 339 ) skip_time_data_output_av
	839	ENDIF
	840	ENDIF
	841
	842	ENDIF
	843
	844	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	845	i = 1
	846	slices = '/'
	847	coordinates = '/'
	848	!
	849	!-- Building strings with index and coordinate informations of the
	850	!-- slices
	851	DO WHILE ( section(i,2) /= -9999 )
	852
	853	WRITE (section_chr,'(I5)') section(i,2)
	854	section_chr = ADJUSTL( section_chr )
	855	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	856
	857	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	858	coor_chr = ADJUSTL( coor_chr )
	859	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	860
	861	i = i + 1
	862	ENDDO
	863	IF ( av == 0 ) THEN
	864	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	865	TRIM( begin_chr ), 'j', TRIM( slices ), &
	866	TRIM( coordinates )
	867	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	868	WRITE ( io, 339 ) skip_time_do2d_xz
	869	ENDIF
	870	ELSE
	871	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	872	TRIM( begin_chr ), averaging_interval, &
	873	dt_averaging_input, 'j', TRIM( slices ), &
	874	TRIM( coordinates )
	875	IF ( skip_time_data_output_av /= 0.0 ) THEN
	876	WRITE ( io, 339 ) skip_time_data_output_av
	877	ENDIF
	878	ENDIF
	879	ENDIF
	880
	881	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	882	i = 1
	883	slices = '/'
	884	coordinates = '/'
	885	!
	886	!-- Building strings with index and coordinate informations of the
	887	!-- slices
	888	DO WHILE ( section(i,3) /= -9999 )
	889
	890	WRITE (section_chr,'(I5)') section(i,3)
	891	section_chr = ADJUSTL( section_chr )
	892	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	893
	894	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	895	coor_chr = ADJUSTL( coor_chr )
	896	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	897
	898	i = i + 1
	899	ENDDO
	900	IF ( av == 0 ) THEN
	901	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	902	TRIM( begin_chr ), 'i', TRIM( slices ), &
	903	TRIM( coordinates )
	904	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	905	WRITE ( io, 339 ) skip_time_do2d_yz
	906	ENDIF
	907	ELSE
	908	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	909	TRIM( begin_chr ), averaging_interval, &
	910	dt_averaging_input, 'i', TRIM( slices ), &
	911	TRIM( coordinates )
	912	IF ( skip_time_data_output_av /= 0.0 ) THEN
	913	WRITE ( io, 339 ) skip_time_data_output_av
	914	ENDIF
	915	ENDIF
	916	ENDIF
	917
	918	ENDIF
	919
	920	ENDDO
	921
	922	!
	923	!-- 3d-arrays
	924	DO av = 0, 1
	925
	926	i = 1
	927	do3d_chr = ''
	928	DO WHILE ( do3d(av,i) /= ' ' )
	929
	930	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	931	i = i + 1
	932
	933	ENDDO
	934
	935	IF ( do3d_chr /= '' ) THEN
	936	IF ( av == 0 ) THEN
	937	WRITE ( io, 336 ) ''
	938	ELSE
	939	WRITE ( io, 336 ) '(time-averaged)'
	940	ENDIF
	941
	942	output_format = ''
	943	IF ( netcdf_output ) THEN
[493]	944	IF ( netcdf_data_format == 1 ) THEN
	945	output_format = 'NetCDF classic'
	946	ELSEIF ( netcdf_data_format == 2 ) THEN
	947	output_format = 'NetCDF 64bit offset'
	948	ELSEIF ( netcdf_data_format == 3 ) THEN
	949	output_format = 'NetCDF4/HDF5'
	950	ELSEIF ( netcdf_data_format == 4 ) THEN
	951	output_format = 'NetCDF4/HDF5 clasic'
[1]	952	ENDIF
	953	ENDIF
	954	IF ( avs_output ) THEN
	955	IF ( netcdf_output ) THEN
	956	output_format = TRIM( output_format ) // ' and avs'
	957	ELSE
	958	output_format = 'avs'
	959	ENDIF
	960	ENDIF
[292]	961	WRITE ( io, 344 ) output_format
[1]	962
	963	IF ( do3d_at_begin ) THEN
	964	begin_chr = 'and at the start'
	965	ELSE
	966	begin_chr = ''
	967	ENDIF
	968	IF ( av == 0 ) THEN
	969	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	970	zu(nz_do3d), nz_do3d
	971	ELSE
	972	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	973	TRIM( begin_chr ), averaging_interval, &
	974	dt_averaging_input, zu(nz_do3d), nz_do3d
	975	ENDIF
	976
	977	IF ( do3d_compress ) THEN
	978	do3d_chr = ''
	979	i = 1
	980	DO WHILE ( do3d(av,i) /= ' ' )
	981
	982	SELECT CASE ( do3d(av,i) )
	983	CASE ( 'u' )
	984	j = 1
	985	CASE ( 'v' )
	986	j = 2
	987	CASE ( 'w' )
	988	j = 3
	989	CASE ( 'p' )
	990	j = 4
	991	CASE ( 'pt' )
	992	j = 5
	993	END SELECT
	994	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	995	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	996	':' // prec // ','
	997	i = i + 1
	998
	999	ENDDO
	1000	WRITE ( io, 338 ) do3d_chr
	1001
	1002	ENDIF
	1003
	1004	IF ( av == 0 ) THEN
	1005	IF ( skip_time_do3d /= 0.0 ) THEN
	1006	WRITE ( io, 339 ) skip_time_do3d
	1007	ENDIF
	1008	ELSE
	1009	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1010	WRITE ( io, 339 ) skip_time_data_output_av
	1011	ENDIF
	1012	ENDIF
	1013
	1014	ENDIF
	1015
	1016	ENDDO
	1017
	1018	!
[410]	1019	!-- masked arrays
	1020	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1021	mask_scale_x, mask_scale_y, mask_scale_z
	1022	DO mid = 1, masks
	1023	DO av = 0, 1
	1024
	1025	i = 1
	1026	domask_chr = ''
	1027	DO WHILE ( domask(mid,av,i) /= ' ' )
	1028	domask_chr = TRIM( domask_chr ) // ' ' // &
	1029	TRIM( domask(mid,av,i) ) // ','
	1030	i = i + 1
	1031	ENDDO
	1032
	1033	IF ( domask_chr /= '' ) THEN
	1034	IF ( av == 0 ) THEN
	1035	WRITE ( io, 346 ) '', mid
	1036	ELSE
	1037	WRITE ( io, 346 ) ' (time-averaged)', mid
	1038	ENDIF
	1039
	1040	output_format = ''
	1041	IF ( netcdf_output ) THEN
[493]	1042	IF ( netcdf_data_format == 1 ) THEN
	1043	output_format = 'NetCDF classic'
	1044	ELSEIF ( netcdf_data_format == 2 ) THEN
	1045	output_format = 'NetCDF 64bit offset'
	1046	ELSEIF ( netcdf_data_format == 3 ) THEN
	1047	output_format = 'NetCDF4/HDF5'
	1048	ELSEIF ( netcdf_data_format == 4 ) THEN
	1049	output_format = 'NetCDF4/HDF5 clasic'
	1050	ENDIF
[410]	1051	ENDIF
	1052	WRITE ( io, 344 ) output_format
	1053
	1054	IF ( av == 0 ) THEN
	1055	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1056	ELSE
	1057	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1058	averaging_interval, dt_averaging_input
	1059	ENDIF
	1060
	1061	IF ( av == 0 ) THEN
	1062	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1063	WRITE ( io, 339 ) skip_time_domask(mid)
	1064	ENDIF
	1065	ELSE
	1066	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1067	WRITE ( io, 339 ) skip_time_data_output_av
	1068	ENDIF
	1069	ENDIF
	1070	!
	1071	!-- output locations
	1072	DO dim = 1, 3
	1073	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1074	count = 0
	1075	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1076	count = count + 1
	1077	ENDDO
	1078	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1079	mask(mid,dim,:count)
	1080	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1081	mask_loop(mid,dim,2) < 0.0 .AND. &
	1082	mask_loop(mid,dim,3) == 0.0 ) THEN
	1083	WRITE ( io, 350 ) dir(dim), dir(dim)
	1084	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1085	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1086	mask_loop(mid,dim,1:2)
	1087	ELSE
	1088	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1089	mask_loop(mid,dim,1:3)
	1090	ENDIF
	1091	ENDDO
	1092	ENDIF
	1093
	1094	ENDDO
	1095	ENDDO
	1096
	1097	!
[1]	1098	!-- Timeseries
	1099	IF ( dt_dots /= 9999999.9 ) THEN
	1100	WRITE ( io, 340 )
	1101
	1102	output_format = ''
	1103	IF ( netcdf_output ) THEN
[493]	1104	IF ( netcdf_data_format == 1 ) THEN
	1105	output_format = 'NetCDF classic'
[1]	1106	ELSE
[493]	1107	output_format = 'NetCDF 64bit offset'
[1]	1108	ENDIF
	1109	ENDIF
	1110	IF ( profil_output ) THEN
	1111	IF ( netcdf_output ) THEN
	1112	output_format = TRIM( output_format ) // ' and profil'
	1113	ELSE
	1114	output_format = 'profil'
	1115	ENDIF
	1116	ENDIF
[292]	1117	WRITE ( io, 344 ) output_format
[1]	1118	WRITE ( io, 341 ) dt_dots
	1119	ENDIF
	1120
	1121	#if defined( __dvrp_graphics )
	1122	!
	1123	!-- Dvrp-output
	1124	IF ( dt_dvrp /= 9999999.9 ) THEN
	1125	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1126	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1127	i = 1
	1128	l = 0
[336]	1129	m = 0
[1]	1130	DO WHILE ( mode_dvrp(i) /= ' ' )
	1131	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1132	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1133	l = l + 1
	1134	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1135	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1136	isosurface_color(:,l)
[1]	1137	ENDIF
	1138	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1139	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1140	m = m + 1
	1141	IF ( do2d(0,j) /= ' ' ) THEN
	1142	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1143	slicer_range_limits_dvrp(:,m)
	1144	ENDIF
[1]	1145	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1146	WRITE ( io, 363 ) dvrp_psize
	1147	IF ( particle_dvrpsize /= 'none' ) THEN
	1148	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1149	dvrpsize_interval
	1150	ENDIF
	1151	IF ( particle_color /= 'none' ) THEN
	1152	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1153	color_interval
	1154	ENDIF
[1]	1155	ENDIF
	1156	i = i + 1
	1157	ENDDO
[237]	1158
[336]	1159	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1160	superelevation_y, superelevation, clip_dvrp_l, &
	1161	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1162
	1163	IF ( TRIM( topography ) /= 'flat' ) THEN
	1164	WRITE ( io, 366 ) topography_color
	1165	IF ( cluster_size > 1 ) THEN
	1166	WRITE ( io, 367 ) cluster_size
	1167	ENDIF
[237]	1168	ENDIF
	1169
[1]	1170	ENDIF
	1171	#endif
	1172
	1173	#if defined( __spectra )
	1174	!
	1175	!-- Spectra output
	1176	IF ( dt_dosp /= 9999999.9 ) THEN
	1177	WRITE ( io, 370 )
	1178
	1179	output_format = ''
	1180	IF ( netcdf_output ) THEN
[493]	1181	IF ( netcdf_data_format == 1 ) THEN
	1182	output_format = 'NetCDF classic'
[1]	1183	ELSE
[493]	1184	output_format = 'NetCDF 64bit offset'
[1]	1185	ENDIF
	1186	ENDIF
	1187	IF ( profil_output ) THEN
	1188	IF ( netcdf_output ) THEN
	1189	output_format = TRIM( output_format ) // ' and profil'
	1190	ELSE
	1191	output_format = 'profil'
	1192	ENDIF
	1193	ENDIF
[292]	1194	WRITE ( io, 344 ) output_format
[1]	1195	WRITE ( io, 371 ) dt_dosp
	1196	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1197	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1198	( spectra_direction(i), i = 1,10 ), &
[189]	1199	( comp_spectra_level(i), i = 1,100 ), &
	1200	( plot_spectra_level(i), i = 1,100 ), &
[1]	1201	averaging_interval_sp, dt_averaging_input_pr
	1202	ENDIF
	1203	#endif
	1204
	1205	WRITE ( io, 99 )
	1206
	1207	!
	1208	!-- Physical quantities
	1209	WRITE ( io, 400 )
	1210
	1211	!
	1212	!-- Geostrophic parameters
	1213	WRITE ( io, 410 ) omega, phi, f, fs
	1214
	1215	!
	1216	!-- Other quantities
	1217	WRITE ( io, 411 ) g
[97]	1218	IF ( use_reference ) THEN
	1219	IF ( ocean ) THEN
	1220	WRITE ( io, 412 ) prho_reference
	1221	ELSE
	1222	WRITE ( io, 413 ) pt_reference
	1223	ENDIF
	1224	ENDIF
[1]	1225
	1226	!
	1227	!-- Cloud physics parameters
	1228	IF ( cloud_physics ) THEN
[57]	1229	WRITE ( io, 415 )
	1230	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1231	ENDIF
	1232
	1233	!-- Profile of the geostrophic wind (component ug)
	1234	!-- Building output strings
	1235	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1236	gradients = '------'
	1237	slices = ' 0'
	1238	coordinates = ' 0.0'
	1239	i = 1
	1240	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1241
[167]	1242	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1243	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1244
[167]	1245	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1246	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1247
[167]	1248	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1249	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1250
[167]	1251	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1252	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1253
[430]	1254	IF ( i == 10 ) THEN
	1255	EXIT
	1256	ELSE
	1257	i = i + 1
	1258	ENDIF
	1259
[1]	1260	ENDDO
	1261
	1262	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1263	TRIM( gradients ), TRIM( slices )
	1264
	1265	!-- Profile of the geostrophic wind (component vg)
	1266	!-- Building output strings
	1267	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1268	gradients = '------'
	1269	slices = ' 0'
	1270	coordinates = ' 0.0'
	1271	i = 1
	1272	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1273
[167]	1274	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1275	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1276
[167]	1277	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1278	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1279
[167]	1280	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1281	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1282
[167]	1283	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1284	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1285
[430]	1286	IF ( i == 10 ) THEN
	1287	EXIT
	1288	ELSE
	1289	i = i + 1
	1290	ENDIF
	1291
[1]	1292	ENDDO
	1293
	1294	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1295	TRIM( gradients ), TRIM( slices )
	1296
	1297	!
	1298	!-- Initial temperature profile
	1299	!-- Building output strings, starting with surface temperature
	1300	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1301	gradients = '------'
	1302	slices = ' 0'
	1303	coordinates = ' 0.0'
	1304	i = 1
	1305	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1306
[94]	1307	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1308	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1309
[94]	1310	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1311	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1312
[94]	1313	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1314	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1315
[94]	1316	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1317	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1318
[430]	1319	IF ( i == 10 ) THEN
	1320	EXIT
	1321	ELSE
	1322	i = i + 1
	1323	ENDIF
	1324
[1]	1325	ENDDO
	1326
	1327	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1328	TRIM( gradients ), TRIM( slices )
	1329
	1330	!
	1331	!-- Initial humidity profile
	1332	!-- Building output strings, starting with surface humidity
[75]	1333	IF ( humidity .OR. passive_scalar ) THEN
[1]	1334	WRITE ( temperatures, '(E8.1)' ) q_surface
	1335	gradients = '--------'
	1336	slices = ' 0'
	1337	coordinates = ' 0.0'
	1338	i = 1
	1339	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1340
	1341	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1342	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1343
	1344	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1345	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1346
	1347	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1348	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1349
	1350	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1351	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1352
[430]	1353	IF ( i == 10 ) THEN
	1354	EXIT
	1355	ELSE
	1356	i = i + 1
	1357	ENDIF
	1358
[1]	1359	ENDDO
	1360
[75]	1361	IF ( humidity ) THEN
[1]	1362	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1363	TRIM( gradients ), TRIM( slices )
	1364	ELSE
	1365	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1366	TRIM( gradients ), TRIM( slices )
	1367	ENDIF
	1368	ENDIF
	1369
	1370	!
[97]	1371	!-- Initial salinity profile
	1372	!-- Building output strings, starting with surface salinity
	1373	IF ( ocean ) THEN
	1374	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1375	gradients = '------'
	1376	slices = ' 0'
	1377	coordinates = ' 0.0'
	1378	i = 1
	1379	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1380
	1381	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1382	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1383
	1384	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1385	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1386
	1387	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1388	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1389
	1390	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1391	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1392
[430]	1393	IF ( i == 10 ) THEN
	1394	EXIT
	1395	ELSE
	1396	i = i + 1
	1397	ENDIF
	1398
[97]	1399	ENDDO
	1400
	1401	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1402	TRIM( gradients ), TRIM( slices )
	1403	ENDIF
	1404
	1405	!
[411]	1406	!-- Profile for the large scale vertial velocity
	1407	!-- Building output strings, starting with surface value
	1408	IF ( large_scale_subsidence ) THEN
	1409	temperatures = ' 0.0'
	1410	gradients = '------'
	1411	slices = ' 0'
	1412	coordinates = ' 0.0'
	1413	i = 1
	1414	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
	1415
	1416	WRITE (coor_chr,'(E10.2,7X)') &
	1417	w_subs(ws_vertical_gradient_level_ind(i))
	1418	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1419
	1420	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
	1421	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1422
	1423	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
	1424	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1425
	1426	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
	1427	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1428
[430]	1429	IF ( i == 10 ) THEN
	1430	EXIT
	1431	ELSE
	1432	i = i + 1
	1433	ENDIF
	1434
[411]	1435	ENDDO
	1436
	1437	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1438	TRIM( gradients ), TRIM( slices )
	1439	ENDIF
	1440
	1441	!
[1]	1442	!-- LES / turbulence parameters
	1443	WRITE ( io, 450 )
	1444
	1445	!--
	1446	! ... LES-constants used must still be added here
	1447	!--
	1448	IF ( constant_diffusion ) THEN
	1449	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1450	prandtl_number
	1451	ENDIF
	1452	IF ( .NOT. constant_diffusion) THEN
[108]	1453	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1454	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1455	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1456	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1457	ENDIF
	1458
	1459	!
	1460	!-- Special actions during the run
	1461	WRITE ( io, 470 )
	1462	IF ( create_disturbances ) THEN
	1463	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1464	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1465	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1466	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1467	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1468	ELSE
	1469	WRITE ( io, 473 ) disturbance_energy_limit
	1470	ENDIF
	1471	WRITE ( io, 474 ) TRIM( random_generator )
	1472	ENDIF
	1473	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1474	WRITE ( io, 475 ) pt_surface_initial_change
	1475	ENDIF
[75]	1476	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1477	WRITE ( io, 476 ) q_surface_initial_change
	1478	ENDIF
	1479	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1480	WRITE ( io, 477 ) q_surface_initial_change
	1481	ENDIF
	1482
[60]	1483	IF ( particle_advection ) THEN
[1]	1484	!
[60]	1485	!-- Particle attributes
	1486	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1487	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1488	end_time_prel, dt_sort_particles
[60]	1489	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1490	IF ( random_start_position ) WRITE ( io, 481 )
	1491	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1492	WRITE ( io, 495 ) total_number_of_particles
	1493	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1494	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1495	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1496	WRITE ( io, 484 ) total_number_of_tails, &
	1497	minimum_tailpoint_distance, &
	1498	maximum_tailpoint_age
	1499	ENDIF
[1]	1500	ENDIF
[60]	1501	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1502	WRITE ( io, 485 ) dt_write_particle_data
	1503	output_format = ''
	1504	IF ( netcdf_output ) THEN
[493]	1505	IF ( netcdf_data_format > 1 ) THEN
[60]	1506	output_format = 'netcdf (64 bit offset) and binary'
	1507	ELSE
	1508	output_format = 'netcdf and binary'
	1509	ENDIF
[1]	1510	ELSE
[60]	1511	output_format = 'binary'
[1]	1512	ENDIF
[292]	1513	WRITE ( io, 344 ) output_format
[1]	1514	ENDIF
[60]	1515	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1516	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1517
[60]	1518	WRITE ( io, 487 ) number_of_particle_groups
[1]	1519
[60]	1520	DO i = 1, number_of_particle_groups
	1521	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1522	WRITE ( io, 490 ) i, 0.0
	1523	WRITE ( io, 492 )
[1]	1524	ELSE
[60]	1525	WRITE ( io, 490 ) i, radius(i)
	1526	IF ( density_ratio(i) /= 0.0 ) THEN
	1527	WRITE ( io, 491 ) density_ratio(i)
	1528	ELSE
	1529	WRITE ( io, 492 )
	1530	ENDIF
[1]	1531	ENDIF
[60]	1532	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1533	pdx(i), pdy(i), pdz(i)
[336]	1534	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1535	ENDDO
[1]	1536
[60]	1537	ENDIF
[1]	1538
[60]	1539
[1]	1540	!
	1541	!-- Parameters of 1D-model
	1542	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1543	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1544	mixing_length_1d, dissipation_1d
	1545	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1546	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1547	ENDIF
	1548	ENDIF
	1549
	1550	!
	1551	!-- User-defined informations
	1552	CALL user_header( io )
	1553
	1554	WRITE ( io, 99 )
	1555
	1556	!
	1557	!-- Write buffer contents to disc immediately
[82]	1558	CALL local_flush( io )
[1]	1559
	1560	!
	1561	!-- Here the FORMATs start
	1562
	1563	99 FORMAT (1X,78('-'))
[200]	1564	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1565	1X,'* ',A,' *',9X,A/ &
	1566	1X,'***************************',9X,42('-'))
[291]	1567	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1568	37X,42('-'))
[200]	1569	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1570	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1571	' Run on host: ',A10)
[1]	1572	#if defined( __parallel )
[200]	1573	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1574	')',1X,A)
[200]	1575	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1576	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1577	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1578	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1579	37X,'because the job is running on an SMP-cluster')
[102]	1580	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1581	#endif
	1582	110 FORMAT (/' Numerical Schemes:'/ &
	1583	' -----------------'/)
	1584	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1585	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1586	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1587	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1588	' or Upstream')
	1589	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1590	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1591	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1592	' or Upstream')
	1593	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1594	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1595	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1596	' Translation velocity = ',A/ &
	1597	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1598	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1599	' of timestep changes)')
	1600	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1601	' timestep changes')
	1602	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1603	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1604	' maximum damping coefficient: ',F5.3, ' 1/s')
	1605	124 FORMAT (' Spline-overshoots are being suppressed')
	1606	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1607	' of'/ &
	1608	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1609	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1610	' of'/ &
	1611	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1612	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1613	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1614	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1615	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1616	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1617	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1618	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1619	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1620	' effective emissivity scheme')
	1621	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1622	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1623	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1624	A,'-cycle)'/ &
	1625	' number of grid levels: ',I2/ &
	1626	' Gauss-Seidel red/black iterations: ',I2)
	1627	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1628	I3,')')
	1629	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1630	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1631	I3,')'/ &
	1632	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1633	I3,')')
	1634	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1635	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1636	140 FORMAT (' maximum residual allowed: ',E10.3)
	1637	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1638	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1639	'step')
[87]	1640	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1641	'kinetic energy')
[1]	1642	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1643	'conserved'/ &
	1644	' using the ',A,' mode')
	1645	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1646	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1647	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1648	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1649	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1650	'prognostic equation for')
	1651	154 FORMAT (' the potential temperature')
[1]	1652	200 FORMAT (//' Run time and time step information:'/ &
	1653	' ----------------------------------'/)
	1654	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1655	' CFL-factor: ',F4.2)
	1656	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1657	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1658	' End time: ',F9.3,' s')
	1659	204 FORMAT ( A,F9.3,' s')
	1660	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1661	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1662	' CPU-time used: ',F9.3,' s per timestep: ', &
	1663	' ',F9.3,' s'/ &
	1664	' per second of simulated tim', &
	1665	'e: ',F9.3,' s')
[291]	1666	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1667	250 FORMAT (//' Computational grid and domain size:'/ &
	1668	' ----------------------------------'// &
	1669	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1670	' m dz = ',F7.3,' m'/ &
	1671	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1672	' m z(u) = ',F10.3,' m'/)
	1673	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1674	' factor: ',F5.3/ &
	1675	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1676	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1677	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1678	255 FORMAT (' Subdomains have equal size')
	1679	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1680	'have smaller sizes'/ &
	1681	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1682	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1683	' degrees')
	1684	270 FORMAT (//' Topography informations:'/ &
	1685	' -----------------------'// &
	1686	1X,'Topography: ',A)
	1687	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1688	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1689	' / ',I4)
[240]	1690	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1691	' direction' / &
	1692	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1693	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1694	278 FORMAT (' Topography grid definition convention:'/ &
	1695	' cell edge (staggered grid points'/ &
	1696	' (u in x-direction, v in y-direction))' /)
	1697	279 FORMAT (' Topography grid definition convention:'/ &
	1698	' cell center (scalar grid points)' /)
[138]	1699	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1700	' ------------------------------'// &
	1701	' Canopy mode: ', A / &
	1702	' Canopy top: ',I4 / &
	1703	' Leaf drag coefficient: ',F6.2 /)
[153]	1704	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1705	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1706	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1707	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1708	' Height: ',A,' m'/ &
	1709	' Leaf area density: ',A,' m2/m3'/ &
	1710	' Gradient: ',A,' m2/m4'/ &
	1711	' Gridpoint: ',A)
	1712
[1]	1713	300 FORMAT (//' Boundary conditions:'/ &
	1714	' -------------------'// &
	1715	' p uv ', &
	1716	' pt'// &
	1717	' B. bound.: ',A/ &
	1718	' T. bound.: ',A)
[97]	1719	301 FORMAT (/' ',A// &
[1]	1720	' B. bound.: ',A/ &
	1721	' T. bound.: ',A)
[19]	1722	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1723	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1724	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1725	'computational u,v-level:'// &
[1]	1726	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1727	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1728	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1729	307 FORMAT (' Heatflux has a random normal distribution')
	1730	308 FORMAT (' Predefined surface temperature')
[97]	1731	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1732	310 FORMAT (//' 1D-Model:'// &
	1733	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1734	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1735	312 FORMAT (' Predefined surface humidity')
	1736	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1737	314 FORMAT (' Predefined scalar value at the surface')
[19]	1738	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1739	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1740	'atmosphere model')
[1]	1741	317 FORMAT (//' Lateral boundaries:'/ &
	1742	' left/right: ',A/ &
	1743	' north/south: ',A)
	1744	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1745	'max =',F5.1,' m**2/s')
[151]	1746	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1747	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1748	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1749	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1750	' v: ',F9.6,' m2/s2')
[151]	1751	325 FORMAT (//' List output:'/ &
[1]	1752	' -----------'// &
	1753	' 1D-Profiles:'/ &
	1754	' Output every ',F8.2,' s')
[151]	1755	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1756	' Averaging input every ',F8.2,' s')
	1757	330 FORMAT (//' Data output:'/ &
	1758	' -----------'/)
	1759	331 FORMAT (/' 1D-Profiles:')
	1760	332 FORMAT (/' ',A)
	1761	333 FORMAT (' Output every ',F8.2,' s',/ &
	1762	' Time averaged over ',F8.2,' s'/ &
	1763	' Averaging input every ',F8.2,' s')
	1764	334 FORMAT (/' 2D-Arrays',A,':')
	1765	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1766	' Output every ',F8.2,' s ',A/ &
	1767	' Cross sections at ',A1,' = ',A/ &
	1768	' scalar-coordinates: ',A,' m'/)
	1769	336 FORMAT (/' 3D-Arrays',A,':')
	1770	337 FORMAT (/' Arrays: ',A/ &
	1771	' Output every ',F8.2,' s ',A/ &
	1772	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1773	338 FORMAT (' Compressed data output'/ &
	1774	' Decimal precision: ',A/)
	1775	339 FORMAT (' No output during initial ',F8.2,' s')
	1776	340 FORMAT (/' Time series:')
	1777	341 FORMAT (' Output every ',F8.2,' s'/)
	1778	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1779	' Output every ',F8.2,' s ',A/ &
	1780	' Time averaged over ',F8.2,' s'/ &
	1781	' Averaging input every ',F8.2,' s'/ &
	1782	' Cross sections at ',A1,' = ',A/ &
	1783	' scalar-coordinates: ',A,' m'/)
	1784	343 FORMAT (/' Arrays: ',A/ &
	1785	' Output every ',F8.2,' s ',A/ &
	1786	' Time averaged over ',F8.2,' s'/ &
	1787	' Averaging input every ',F8.2,' s'/ &
	1788	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1789	344 FORMAT (' Output format: ',A/)
[410]	1790	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1791	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1792	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1793	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1794	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1795	347 FORMAT (' Variables: ',A/ &
	1796	' Output every ',F8.2,' s')
	1797	348 FORMAT (' Variables: ',A/ &
	1798	' Output every ',F8.2,' s'/ &
	1799	' Time averaged over ',F8.2,' s'/ &
	1800	' Averaging input every ',F8.2,' s')
	1801	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1802	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1803	13(' ',8(F8.2,',')/) )
	1804	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1805	'all gridpoints along ',A,'-direction (default).' )
	1806	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1807	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1808	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1809	#if defined( __dvrp_graphics )
	1810	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1811	' Output every ',F7.1,' s'/ &
	1812	' Output mode: ',A/ &
	1813	' Host / User: ',A,' / ',A/ &
	1814	' Directory: ',A// &
	1815	' The sequence contains:')
[337]	1816	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1817	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1818	362 FORMAT (/' Slicer plane ',A/ &
[336]	1819	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1820	363 FORMAT (/' Particles'/ &
[336]	1821	' particle size: ',F7.2,' m')
	1822	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1823	F6.2,',',F6.2,']')
[337]	1824	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1825	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1826	')'/ &
	1827	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1828	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1829	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1830	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1831	#endif
	1832	#if defined( __spectra )
	1833	370 FORMAT (' Spectra:')
	1834	371 FORMAT (' Output every ',F7.1,' s'/)
	1835	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1836	' Directions: ', 10(A5,',')/ &
[189]	1837	' height levels k = ', 20(I3,',')/ &
	1838	' ', 20(I3,',')/ &
	1839	' ', 20(I3,',')/ &
	1840	' ', 20(I3,',')/ &
	1841	' ', 19(I3,','),I3,'.'/ &
[1]	1842	' height levels selected for standard plot:'/ &
[189]	1843	' k = ', 20(I3,',')/ &
	1844	' ', 20(I3,',')/ &
	1845	' ', 20(I3,',')/ &
	1846	' ', 20(I3,',')/ &
	1847	' ', 19(I3,','),I3,'.'/ &
[1]	1848	' Time averaged over ', F7.1, ' s,' / &
	1849	' Profiles for the time averaging are taken every ', &
	1850	F6.1,' s')
	1851	#endif
	1852	400 FORMAT (//' Physical quantities:'/ &
	1853	' -------------------'/)
	1854	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1855	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1856	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1857	' f* = ',F9.6,' 1/s')
	1858	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1859	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1860	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1861	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1862	' ------------------------'/)
[57]	1863	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1864	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1865	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1866	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1867	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1868	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1869	' Height: ',A,' m'/ &
	1870	' Temperature: ',A,' K'/ &
	1871	' Gradient: ',A,' K/100m'/ &
	1872	' Gridpoint: ',A)
	1873	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1874	' Height: ',A,' m'/ &
	1875	' Humidity: ',A,' kg/kg'/ &
	1876	' Gradient: ',A,' (kg/kg)/100m'/ &
	1877	' Gridpoint: ',A)
	1878	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1879	' Height: ',A,' m'/ &
	1880	' Scalar concentration: ',A,' kg/m**3'/ &
	1881	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1882	' Gridpoint: ',A)
	1883	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1884	' Height: ',A,' m'/ &
	1885	' ug: ',A,' m/s'/ &
	1886	' Gradient: ',A,' 1/100s'/ &
	1887	' Gridpoint: ',A)
	1888	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1889	' Height: ',A,' m'/ &
[97]	1890	' vg: ',A,' m/s'/ &
[1]	1891	' Gradient: ',A,' 1/100s'/ &
	1892	' Gridpoint: ',A)
[97]	1893	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1894	' Height: ',A,' m'/ &
	1895	' Salinity: ',A,' psu'/ &
	1896	' Gradient: ',A,' psu/100m'/ &
	1897	' Gridpoint: ',A)
[411]	1898	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1899	' Height: ',A,' m'/ &
	1900	' w_subs: ',A,' m/s'/ &
	1901	' Gradient: ',A,' (m/s)/100m'/ &
	1902	' Gridpoint: ',A)
[1]	1903	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1904	' ---------------------------'/)
	1905	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1906	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1907	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1908	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1909	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1910	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1911	470 FORMAT (//' Actions during the simulation:'/ &
	1912	' -----------------------------'/)
[94]	1913	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1914	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1915	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1916	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1917	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1918	' to i/j =',I4)
	1919	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1920	1X,F5.3, ' m2/s2')
	1921	474 FORMAT (' Random number generator used : ',A/)
	1922	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1923	'respectively, if'/ &
	1924	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1925	' 3D-simulation'/)
	1926	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1927	'respectively, if the'/ &
	1928	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1929	' the 3D-simulation'/)
	1930	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1931	'respectively, if the'/ &
	1932	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1933	' the 3D-simulation'/)
	1934	480 FORMAT (' Particles:'/ &
	1935	' ---------'// &
	1936	' Particle advection is active (switched on at t = ', F7.1, &
	1937	' s)'/ &
	1938	' Start of new particle generations every ',F6.1,' s'/ &
	1939	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1940	' bottom: ', A, ' top: ', A/&
	1941	' Maximum particle age: ',F9.1,' s'/ &
[117]	1942	' Advection stopped at t = ',F9.1,' s'/ &
	1943	' Particles are sorted every ',F9.1,' s'/)
[1]	1944	481 FORMAT (' Particles have random start positions'/)
[336]	1945	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1946	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1947	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1948	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1949	' Maximum age of the end of the tail: ',F8.2,' s')
	1950	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1951	486 FORMAT (' Particle statistics are written on file'/)
	1952	487 FORMAT (' Number of particle groups: ',I2/)
	1953	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1954	' minimum timestep for advection: ', F7.5/)
	1955	489 FORMAT (' Number of particles simultaneously released at each ', &
	1956	'point: ', I5/)
	1957	490 FORMAT (' Particle group ',I2,':'/ &
	1958	' Particle radius: ',E10.3, 'm')
	1959	491 FORMAT (' Particle inertia is activated'/ &
	1960	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1961	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1962	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1963	' y:',F8.1,' - ',F8.1,' m'/&
	1964	' z:',F8.1,' - ',F8.1,' m'/&
	1965	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1966	' m dz = ',F8.1,' m'/)
	1967	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1968	F8.2,' s'/)
	1969	495 FORMAT (' Number of particles in total domain: ',I10/)
	1970	500 FORMAT (//' 1D-Model parameters:'/ &
	1971	' -------------------'// &
	1972	' Simulation time: ',F8.1,' s'/ &
	1973	' Run-controll output every: ',F8.1,' s'/ &
	1974	' Vertical profile output every: ',F8.1,' s'/ &
	1975	' Mixing length calculation: ',A/ &
	1976	' Dissipation calculation: ',A/)
	1977	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1978
	1979
	1980	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |