Home

Context Navigation

header.f90 @ 483

Last change on this file since 483 was 482, checked in by raasch, 15 years ago

New:
---
compare_palm_logs is additionally compiled with mbuild -u (Makefile in trunk/UTIL)

make options (mopts) to be set by configuration file implemented (mrun, mbuild)

humidity=.T. is now usable for runs with topography. wall_humidityflux and
wall_scalarflux are the corresponding new parin arrays.
(check_parameters, init_3d_model, parin)

Large scale vertical motion (subsidence/ascent) can be applied to the
prognostic equation for the potential temperature. (check_parameters, header,
Makefile, modules, parin, prognostic_equations, read_var_list, subsidence,
write_var_list)

A simple method for installing and running palm (with limited features)
has been added. (Makefile, palm_simple_install, palm_simple_run)

Changed:

2d-decomposition is default for Cray-XT machines (init_pegrid)

var_ts is replaced by dots_max (modules,init_3d_model)

Every cloud droplet has now an own weighting factor and can be deleted due to
collisions. Condensation and collision of cloud droplets are adjusted
accordingly. (advec_particles)

Collision efficiency for large cloud droplets has changed according to table of
Rogers and Yau. (collision_efficiency)

Errors:

Bugfix for generating serial jobs (subjob)

Bugfix: index problem concerning gradient_level indices removed (header)

Dimension of array stat in cascade change to prevent type problems with
mpi2 libraries (poisfft_hybrid)

Loop was split to make runs reproducible when using ifort compiler.
(disturb_field)

Bugfix: exchange of ghost points for prho included (time_integration)

Bugfix: calculation of time-averaged surface heatfluxes (sum_up_3d_data)

Bugfix: calculation of precipitation_rate (calc_precipitation)

Bugfix: initial data assignments to some dvrp arrays changed due to error
messages from gfortran compiler (modules)

Bugfix: calculation of cloud droplet velocity (advec_particles)

Bugfix: transfer of particles at south/left edge (advec_particles)

Bugfix: calculation of collision_efficiency (collision_efficiency)

Bugfix: initialisation of var_mod (subsidence)

Property svn:keywords set to Id

File size: 75.7 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[392]	6	!
[482]	7	!
[392]	8	! Former revisions:
	9	! -----------------
	10	! $Id: header.f90 482 2010-02-05 06:37:03Z raasch $
	11	!
[482]	12	! 449 2010-02-02 11:23:59Z raasch
	13	! +large scale vertical motion (subsidence/ascent)
	14	! Bugfix: index problem concerning gradient_level indices removed
	15	!
[449]	16	! 410 2009-12-04 17:05:40Z letzel
	17	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
	18	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
	19	!
[392]	20	! 346 2009-07-06 10:13:41Z raasch
[328]	21	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	22	! Coupling with independent precursor runs.
[254]	23	! Output of messages replaced by message handling routine.
[336]	24	! Output of several additional dvr parameters
[240]	25	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	26	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	27	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	28	! topography_grid_convention moved from user_header
[292]	29	! small bugfix concerning 3d 64bit netcdf output format
[1]	30	!
[226]	31	! 206 2008-10-13 14:59:11Z raasch
	32	! Bugfix: error in zu index in case of section_xy = -1
	33	!
[200]	34	! 198 2008-09-17 08:55:28Z raasch
	35	! Format adjustments allowing output of larger revision numbers
	36	!
[198]	37	! 197 2008-09-16 15:29:03Z raasch
	38	! allow 100 spectra levels instead of 10 for consistency with
	39	! define_netcdf_header,
	40	! bugfix in the output of the characteristic levels of potential temperature,
	41	! geostrophic wind, scalar concentration, humidity and leaf area density,
	42	! output of turbulence recycling informations
	43	!
[139]	44	! 138 2007-11-28 10:03:58Z letzel
	45	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	46	! Allow two instead of one digit to specify isosurface and slicer variables.
	47	! Output of sorting frequency of particles
	48	!
[110]	49	! 108 2007-08-24 15:10:38Z letzel
	50	! Output of informations for coupled model runs (boundary conditions etc.)
	51	! + output of momentumfluxes at the top boundary
	52	! Rayleigh damping for ocean, e_init
	53	!
[98]	54	! 97 2007-06-21 08:23:15Z raasch
	55	! Adjustments for the ocean version.
	56	! use_pt_reference renamed use_reference
	57	!
[90]	58	! 87 2007-05-22 15:46:47Z raasch
	59	! Bugfix: output of use_upstream_for_tke
	60	!
[83]	61	! 82 2007-04-16 15:40:52Z raasch
	62	! Preprocessor strings for different linux clusters changed to "lc",
	63	! routine local_flush is used for buffer flushing
	64	!
[77]	65	! 76 2007-03-29 00:58:32Z raasch
	66	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	67	! output of the loop optimization method, moisture renamed humidity,
	68	! output of subversion revision number
	69	!
[39]	70	! 19 2007-02-23 04:53:48Z raasch
	71	! Output of scalar flux applied at top boundary
	72	!
[3]	73	! RCS Log replace by Id keyword, revision history cleaned up
	74	!
[1]	75	! Revision 1.63 2006/08/22 13:53:13 raasch
	76	! Output of dz_max
	77	!
	78	! Revision 1.1 1997/08/11 06:17:20 raasch
	79	! Initial revision
	80	!
	81	!
	82	! Description:
	83	! ------------
	84	! Writing a header with all important informations about the actual run.
	85	! This subroutine is called three times, two times at the beginning
	86	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	87	! end of the run, then writing additional information about CPU-usage on file
	88	! header.
[411]	89	!-----------------------------------------------------------------------------!
[1]	90
	91	USE arrays_3d
	92	USE control_parameters
	93	USE cloud_parameters
	94	USE cpulog
	95	USE dvrp_variables
	96	USE grid_variables
	97	USE indices
	98	USE model_1d
	99	USE particle_attributes
	100	USE pegrid
[411]	101	USE subsidence_mod
[1]	102	USE spectrum
	103
	104	IMPLICIT NONE
	105
	106	CHARACTER (LEN=1) :: prec
	107	CHARACTER (LEN=2) :: do2d_mode
	108	CHARACTER (LEN=5) :: section_chr
	109	CHARACTER (LEN=9) :: time_to_string
	110	CHARACTER (LEN=10) :: coor_chr, host_chr
	111	CHARACTER (LEN=16) :: begin_chr
[200]	112	CHARACTER (LEN=23) :: ver_rev
[1]	113	CHARACTER (LEN=40) :: output_format
[167]	114	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	115	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	116	domask_chr, run_classification
[167]	117	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	118	temperatures, ugcomponent, vgcomponent
[1]	119	CHARACTER (LEN=85) :: roben, runten
	120
[410]	121	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	122
	123	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	124	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	125	REAL :: cpuseconds_per_simulated_second
	126
	127	!
	128	!-- Open the output file. At the end of the simulation, output is directed
	129	!-- to unit 19.
	130	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	131	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	132	io = 15 ! header output on file RUN_CONTROL
	133	ELSE
	134	io = 19 ! header output on file HEADER
	135	ENDIF
	136	CALL check_open( io )
	137
	138	!
	139	!-- At the end of the run, output file (HEADER) will be rewritten with
	140	!-- new informations
	141	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	142
	143	!
	144	!-- Determine kind of model run
	145	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	146	run_classification = '3D - restart run'
[328]	147	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	148	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	149	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	150	run_classification = '3D - run without 1D - prerun'
[197]	151	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	152	run_classification = '3D - run with 1D - prerun'
[197]	153	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	154	run_classification = '3D - run initialized by user'
[1]	155	ELSE
[254]	156	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	157	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	158	ENDIF
[97]	159	IF ( ocean ) THEN
	160	run_classification = 'ocean - ' // run_classification
	161	ELSE
	162	run_classification = 'atmosphere - ' // run_classification
	163	ENDIF
[1]	164
	165	!
	166	!-- Run-identification, date, time, host
	167	host_chr = host(1:10)
[75]	168	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	169	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	170	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	171	#if defined( __mpi2 )
	172	mpi_type = 2
	173	#else
	174	mpi_type = 1
	175	#endif
	176	WRITE ( io, 101 ) mpi_type, coupling_mode
	177	ENDIF
[102]	178	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	179	ADJUSTR( host_chr )
[1]	180	#if defined( __parallel )
	181	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	182	char1 = 'calculated'
	183	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	184	host(1:2) == 'lc' ) .AND. &
	185	npex == -1 .AND. pdims(2) == 1 ) THEN
	186	char1 = 'forced'
	187	ELSE
	188	char1 = 'predefined'
	189	ENDIF
	190	IF ( threads_per_task == 1 ) THEN
[102]	191	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	192	ELSE
[102]	193	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	194	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	195	ENDIF
	196	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	197	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	198	npex == -1 .AND. pdims(2) == 1 ) &
	199	THEN
[102]	200	WRITE ( io, 106 )
[1]	201	ELSEIF ( pdims(2) == 1 ) THEN
[102]	202	WRITE ( io, 107 ) 'x'
[1]	203	ELSEIF ( pdims(1) == 1 ) THEN
[102]	204	WRITE ( io, 107 ) 'y'
[1]	205	ENDIF
[102]	206	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	207	#endif
	208	WRITE ( io, 99 )
	209
	210	!
	211	!-- Numerical schemes
	212	WRITE ( io, 110 )
	213	IF ( psolver(1:7) == 'poisfft' ) THEN
	214	WRITE ( io, 111 ) TRIM( fft_method )
	215	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	216	ELSEIF ( psolver == 'sor' ) THEN
	217	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	218	ELSEIF ( psolver == 'multigrid' ) THEN
	219	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	220	IF ( mg_cycles == -1 ) THEN
	221	WRITE ( io, 140 ) residual_limit
	222	ELSE
	223	WRITE ( io, 141 ) mg_cycles
	224	ENDIF
	225	IF ( mg_switch_to_pe0_level == 0 ) THEN
	226	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	227	nzt_mg(1)
[197]	228	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	229	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	230	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	231	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	232	nzt_mg(mg_switch_to_pe0_level), &
	233	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	234	nzt_mg(1)
	235	ENDIF
	236	ENDIF
	237	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	238	THEN
	239	WRITE ( io, 142 )
	240	ENDIF
	241
	242	IF ( momentum_advec == 'pw-scheme' ) THEN
	243	WRITE ( io, 113 )
	244	ELSE
	245	WRITE ( io, 114 )
	246	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	247	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	248	overshoot_limit_w /= 0.0 ) THEN
	249	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	250	overshoot_limit_w
	251	ENDIF
	252	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	253	ups_limit_w /= 0.0 ) &
	254	THEN
	255	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	256	ENDIF
	257	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	258	ENDIF
	259	IF ( scalar_advec == 'pw-scheme' ) THEN
	260	WRITE ( io, 116 )
	261	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	262	WRITE ( io, 117 )
	263	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	264	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	265	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	266	ENDIF
	267	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	268	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	269	ENDIF
	270	ELSE
	271	WRITE ( io, 118 )
	272	ENDIF
[63]	273
	274	WRITE ( io, 139 ) TRIM( loop_optimization )
	275
[1]	276	IF ( galilei_transformation ) THEN
	277	IF ( use_ug_for_galilei_tr ) THEN
	278	char1 = 'geostrophic wind'
	279	ELSE
	280	char1 = 'mean wind in model domain'
	281	ENDIF
	282	IF ( simulated_time_at_begin == simulated_time ) THEN
	283	char2 = 'at the start of the run'
	284	ELSE
	285	char2 = 'at the end of the run'
	286	ENDIF
	287	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	288	advected_distance_x/1000.0, advected_distance_y/1000.0
	289	ENDIF
	290	IF ( timestep_scheme == 'leapfrog' ) THEN
	291	WRITE ( io, 120 )
	292	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	293	WRITE ( io, 121 )
	294	ELSE
	295	WRITE ( io, 122 ) timestep_scheme
	296	ENDIF
[87]	297	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	298	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	299	IF ( .NOT. ocean ) THEN
	300	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	301	rayleigh_damping_factor
	302	ELSE
	303	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	304	rayleigh_damping_factor
	305	ENDIF
[1]	306	ENDIF
[75]	307	IF ( humidity ) THEN
[1]	308	IF ( .NOT. cloud_physics ) THEN
	309	WRITE ( io, 129 )
	310	ELSE
	311	WRITE ( io, 130 )
	312	WRITE ( io, 131 )
	313	IF ( radiation ) WRITE ( io, 132 )
	314	IF ( precipitation ) WRITE ( io, 133 )
	315	ENDIF
	316	ENDIF
	317	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	318	IF ( conserve_volume_flow ) THEN
[241]	319	WRITE ( io, 150 ) conserve_volume_flow_mode
	320	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	321	WRITE ( io, 151 ) u_bulk, v_bulk
	322	ENDIF
[240]	323	ELSEIF ( dp_external ) THEN
	324	IF ( dp_smooth ) THEN
[241]	325	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	326	ELSE
[241]	327	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	328	ENDIF
	329	ENDIF
[411]	330	IF ( large_scale_subsidence ) THEN
	331	WRITE ( io, 153 )
	332	WRITE ( io, 154 )
	333	ENDIF
[1]	334	WRITE ( io, 99 )
	335
	336	!
	337	!-- Runtime and timestep informations
	338	WRITE ( io, 200 )
	339	IF ( .NOT. dt_fixed ) THEN
	340	WRITE ( io, 201 ) dt_max, cfl_factor
	341	ELSE
	342	WRITE ( io, 202 ) dt
	343	ENDIF
	344	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	345
	346	IF ( time_restart /= 9999999.9 .AND. &
	347	simulated_time_at_begin == simulated_time ) THEN
	348	IF ( dt_restart == 9999999.9 ) THEN
	349	WRITE ( io, 204 ) ' Restart at: ',time_restart
	350	ELSE
	351	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	352	ENDIF
	353	ENDIF
	354
	355	IF ( simulated_time_at_begin /= simulated_time ) THEN
	356	i = MAX ( log_point_s(10)%counts, 1 )
	357	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	358	cpuseconds_per_simulated_second = 0.0
	359	ELSE
	360	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	361	( simulated_time - &
	362	simulated_time_at_begin )
	363	ENDIF
	364	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	365	log_point_s(10)%sum / REAL( i ), &
	366	cpuseconds_per_simulated_second
	367	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	368	IF ( dt_restart == 9999999.9 ) THEN
	369	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	370	ELSE
	371	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	372	ENDIF
	373	ENDIF
	374	ENDIF
	375
	376	!
[291]	377	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	378	!-- and ocean are used. In this case, coupling_start_time defines the time
	379	!-- when the coupling is switched on.
	380	IF ( coupling_start_time /= 0.0 ) THEN
	381	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	382	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	383	ELSE
	384	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	385	'precursor runs'
	386	ENDIF
	387	WRITE ( io, 207 ) char1, coupling_start_time
	388	ENDIF
	389
	390	!
[1]	391	!-- Computational grid
[94]	392	IF ( .NOT. ocean ) THEN
	393	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	394	IF ( dz_stretch_level_index < nzt+1 ) THEN
	395	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	396	dz_stretch_factor, dz_max
	397	ENDIF
	398	ELSE
	399	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	400	IF ( dz_stretch_level_index > 0 ) THEN
	401	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	402	dz_stretch_factor, dz_max
	403	ENDIF
[1]	404	ENDIF
	405	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	406	MIN( nnz+2, nzt+2 )
[76]	407	IF ( numprocs > 1 ) THEN
	408	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	409	WRITE ( io, 255 )
	410	ELSE
	411	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	412	ENDIF
[1]	413	ENDIF
	414	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	415
	416	!
	417	!-- Topography
	418	WRITE ( io, 270 ) topography
	419	SELECT CASE ( TRIM( topography ) )
	420
	421	CASE ( 'flat' )
	422	! no actions necessary
	423
	424	CASE ( 'single_building' )
	425	blx = INT( building_length_x / dx )
	426	bly = INT( building_length_y / dy )
	427	bh = INT( building_height / dz )
	428
	429	IF ( building_wall_left == 9999999.9 ) THEN
	430	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	431	ENDIF
	432	bxl = INT ( building_wall_left / dx + 0.5 )
	433	bxr = bxl + blx
	434
	435	IF ( building_wall_south == 9999999.9 ) THEN
	436	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	437	ENDIF
	438	bys = INT ( building_wall_south / dy + 0.5 )
	439	byn = bys + bly
	440
	441	WRITE ( io, 271 ) building_length_x, building_length_y, &
	442	building_height, bxl, bxr, bys, byn
	443
[240]	444	CASE ( 'single_street_canyon' )
	445	ch = NINT( canyon_height / dz )
	446	IF ( canyon_width_x /= 9999999.9 ) THEN
	447	!
	448	!-- Street canyon in y direction
	449	cwx = NINT( canyon_width_x / dx )
	450	IF ( canyon_wall_left == 9999999.9 ) THEN
	451	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	452	ENDIF
	453	cxl = NINT( canyon_wall_left / dx )
	454	cxr = cxl + cwx
	455	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	456
	457	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	458	!
	459	!-- Street canyon in x direction
	460	cwy = NINT( canyon_width_y / dy )
	461	IF ( canyon_wall_south == 9999999.9 ) THEN
	462	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	463	ENDIF
	464	cys = NINT( canyon_wall_south / dy )
	465	cyn = cys + cwy
	466	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	467	ENDIF
	468
[1]	469	END SELECT
	470
[256]	471	IF ( TRIM( topography ) /= 'flat' ) THEN
	472	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	473	IF ( TRIM( topography ) == 'single_building' .OR. &
	474	TRIM( topography ) == 'single_street_canyon' ) THEN
	475	WRITE ( io, 278 )
	476	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	477	WRITE ( io, 279 )
	478	ENDIF
	479	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	480	WRITE ( io, 278 )
	481	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	482	WRITE ( io, 279 )
	483	ENDIF
	484	ENDIF
	485
[138]	486	IF ( plant_canopy ) THEN
	487
	488	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	489	IF ( passive_scalar ) THEN
	490	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	491	leaf_surface_concentration
	492	ENDIF
[138]	493
[1]	494	!
[153]	495	!-- Heat flux at the top of vegetation
	496	WRITE ( io, 282 ) cthf
	497
	498	!
[138]	499	!-- Leaf area density profile
	500	!-- Building output strings, starting with surface value
	501	WRITE ( learde, '(F6.2)' ) lad_surface
	502	gradients = '------'
	503	slices = ' 0'
	504	coordinates = ' 0.0'
	505	i = 1
	506	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	507
	508	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	509	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	510
	511	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	512	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	513
	514	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	515	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	516
	517	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	518	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	519
	520	i = i + 1
	521	ENDDO
	522
[153]	523	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	524	TRIM( gradients ), TRIM( slices )
	525
	526	ENDIF
	527
	528	!
[1]	529	!-- Boundary conditions
	530	IF ( ibc_p_b == 0 ) THEN
	531	runten = 'p(0) = 0 \|'
	532	ELSEIF ( ibc_p_b == 1 ) THEN
	533	runten = 'p(0) = p(1) \|'
	534	ELSE
	535	runten = 'p(0) = p(1) +R\|'
	536	ENDIF
	537	IF ( ibc_p_t == 0 ) THEN
	538	roben = 'p(nzt+1) = 0 \|'
	539	ELSE
	540	roben = 'p(nzt+1) = p(nzt) \|'
	541	ENDIF
	542
	543	IF ( ibc_uv_b == 0 ) THEN
	544	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	545	ELSE
	546	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	547	ENDIF
[132]	548	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	549	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	550	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	551	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	552	ELSE
	553	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	554	ENDIF
	555
	556	IF ( ibc_pt_b == 0 ) THEN
	557	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	558	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	559	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	560	ELSEIF ( ibc_pt_b == 2 ) THEN
	561	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	562	ENDIF
	563	IF ( ibc_pt_t == 0 ) THEN
[19]	564	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	565	ELSEIF( ibc_pt_t == 1 ) THEN
	566	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	567	ELSEIF( ibc_pt_t == 2 ) THEN
	568	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	569	ENDIF
	570
	571	WRITE ( io, 300 ) runten, roben
	572
	573	IF ( .NOT. constant_diffusion ) THEN
	574	IF ( ibc_e_b == 1 ) THEN
	575	runten = 'e(0) = e(1)'
	576	ELSE
	577	runten = 'e(0) = e(1) = (u/0.1)*2'
	578	ENDIF
	579	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	580
[97]	581	WRITE ( io, 301 ) 'e', runten, roben
[1]	582
	583	ENDIF
	584
[97]	585	IF ( ocean ) THEN
	586	runten = 'sa(0) = sa(1)'
	587	IF ( ibc_sa_t == 0 ) THEN
	588	roben = 'sa(nzt+1) = sa_surface'
[1]	589	ELSE
[97]	590	roben = 'sa(nzt+1) = sa(nzt)'
[1]	591	ENDIF
[97]	592	WRITE ( io, 301 ) 'sa', runten, roben
	593	ENDIF
[1]	594
[97]	595	IF ( humidity ) THEN
	596	IF ( ibc_q_b == 0 ) THEN
	597	runten = 'q(0) = q_surface'
	598	ELSE
	599	runten = 'q(0) = q(1)'
	600	ENDIF
	601	IF ( ibc_q_t == 0 ) THEN
	602	roben = 'q(nzt) = q_top'
	603	ELSE
	604	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	605	ENDIF
	606	WRITE ( io, 301 ) 'q', runten, roben
	607	ENDIF
[1]	608
[97]	609	IF ( passive_scalar ) THEN
	610	IF ( ibc_q_b == 0 ) THEN
	611	runten = 's(0) = s_surface'
	612	ELSE
	613	runten = 's(0) = s(1)'
	614	ENDIF
	615	IF ( ibc_q_t == 0 ) THEN
	616	roben = 's(nzt) = s_top'
	617	ELSE
	618	roben = 's(nzt) = s(nzt-1) + ds/dz'
	619	ENDIF
	620	WRITE ( io, 301 ) 's', runten, roben
[1]	621	ENDIF
	622
	623	IF ( use_surface_fluxes ) THEN
	624	WRITE ( io, 303 )
	625	IF ( constant_heatflux ) THEN
	626	WRITE ( io, 306 ) surface_heatflux
	627	IF ( random_heatflux ) WRITE ( io, 307 )
	628	ENDIF
[75]	629	IF ( humidity .AND. constant_waterflux ) THEN
[1]	630	WRITE ( io, 311 ) surface_waterflux
	631	ENDIF
	632	IF ( passive_scalar .AND. constant_waterflux ) THEN
	633	WRITE ( io, 313 ) surface_waterflux
	634	ENDIF
	635	ENDIF
	636
[19]	637	IF ( use_top_fluxes ) THEN
	638	WRITE ( io, 304 )
[102]	639	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	640	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	641	IF ( constant_top_heatflux ) THEN
	642	WRITE ( io, 306 ) top_heatflux
	643	ENDIF
	644	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	645	WRITE ( io, 316 )
[19]	646	ENDIF
[97]	647	IF ( ocean .AND. constant_top_salinityflux ) THEN
	648	WRITE ( io, 309 ) top_salinityflux
	649	ENDIF
[75]	650	IF ( humidity .OR. passive_scalar ) THEN
[19]	651	WRITE ( io, 315 )
	652	ENDIF
	653	ENDIF
	654
[1]	655	IF ( prandtl_layer ) THEN
[94]	656	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	657	rif_min, rif_max
[1]	658	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	659	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	660	WRITE ( io, 312 )
	661	ENDIF
	662	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	663	WRITE ( io, 314 )
	664	ENDIF
	665	ELSE
	666	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	667	WRITE ( io, 310 ) rif_min, rif_max
	668	ENDIF
	669	ENDIF
	670
	671	WRITE ( io, 317 ) bc_lr, bc_ns
	672	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	673	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	674	IF ( turbulent_inflow ) THEN
	675	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	676	inflow_damping_height, inflow_damping_width
	677	ENDIF
[1]	678	ENDIF
	679
	680	!
	681	!-- Listing of 1D-profiles
[151]	682	WRITE ( io, 325 ) dt_dopr_listing
[1]	683	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	684	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	685	ENDIF
	686
	687	!
	688	!-- DATA output
	689	WRITE ( io, 330 )
	690	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	691	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	692	ENDIF
	693
	694	!
	695	!-- 1D-profiles
[346]	696	dopr_chr = 'Profile:'
[1]	697	IF ( dopr_n /= 0 ) THEN
	698	WRITE ( io, 331 )
	699
	700	output_format = ''
	701	IF ( netcdf_output ) THEN
	702	IF ( netcdf_64bit ) THEN
	703	output_format = 'netcdf (64 bit offset)'
	704	ELSE
	705	output_format = 'netcdf'
	706	ENDIF
	707	ENDIF
	708	IF ( profil_output ) THEN
	709	IF ( netcdf_output ) THEN
	710	output_format = TRIM( output_format ) // ' and profil'
	711	ELSE
	712	output_format = 'profil'
	713	ENDIF
	714	ENDIF
[292]	715	WRITE ( io, 344 ) output_format
[1]	716
	717	DO i = 1, dopr_n
	718	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	719	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	720	WRITE ( io, 332 ) dopr_chr
	721	dopr_chr = ' :'
	722	ENDIF
	723	ENDDO
	724
	725	IF ( dopr_chr /= '' ) THEN
	726	WRITE ( io, 332 ) dopr_chr
	727	ENDIF
	728	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	729	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	730	ENDIF
	731
	732	!
	733	!-- 2D-arrays
	734	DO av = 0, 1
	735
	736	i = 1
	737	do2d_xy = ''
	738	do2d_xz = ''
	739	do2d_yz = ''
	740	DO WHILE ( do2d(av,i) /= ' ' )
	741
	742	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	743	do2d_mode = do2d(av,i)(l-1:l)
	744
	745	SELECT CASE ( do2d_mode )
	746	CASE ( 'xy' )
	747	ll = LEN_TRIM( do2d_xy )
	748	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	749	CASE ( 'xz' )
	750	ll = LEN_TRIM( do2d_xz )
	751	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	752	CASE ( 'yz' )
	753	ll = LEN_TRIM( do2d_yz )
	754	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	755	END SELECT
	756
	757	i = i + 1
	758
	759	ENDDO
	760
	761	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	762	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	763	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	764	( netcdf_output .OR. iso2d_output ) ) THEN
	765
	766	IF ( av == 0 ) THEN
	767	WRITE ( io, 334 ) ''
	768	ELSE
	769	WRITE ( io, 334 ) '(time-averaged)'
	770	ENDIF
	771
	772	IF ( do2d_at_begin ) THEN
	773	begin_chr = 'and at the start'
	774	ELSE
	775	begin_chr = ''
	776	ENDIF
	777
	778	output_format = ''
	779	IF ( netcdf_output ) THEN
	780	IF ( netcdf_64bit ) THEN
	781	output_format = 'netcdf (64 bit offset)'
	782	ELSE
	783	output_format = 'netcdf'
	784	ENDIF
	785	ENDIF
	786	IF ( iso2d_output ) THEN
	787	IF ( netcdf_output ) THEN
	788	output_format = TRIM( output_format ) // ' and iso2d'
	789	ELSE
	790	output_format = 'iso2d'
	791	ENDIF
	792	ENDIF
[292]	793	WRITE ( io, 344 ) output_format
[1]	794
	795	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	796	i = 1
	797	slices = '/'
	798	coordinates = '/'
	799	!
	800	!-- Building strings with index and coordinate informations of the
	801	!-- slices
	802	DO WHILE ( section(i,1) /= -9999 )
	803
	804	WRITE (section_chr,'(I5)') section(i,1)
	805	section_chr = ADJUSTL( section_chr )
	806	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	807
[206]	808	IF ( section(i,1) == -1 ) THEN
	809	WRITE (coor_chr,'(F10.1)') -1.0
	810	ELSE
	811	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	812	ENDIF
[1]	813	coor_chr = ADJUSTL( coor_chr )
	814	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	815
	816	i = i + 1
	817	ENDDO
	818	IF ( av == 0 ) THEN
	819	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	820	TRIM( begin_chr ), 'k', TRIM( slices ), &
	821	TRIM( coordinates )
	822	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	823	WRITE ( io, 339 ) skip_time_do2d_xy
	824	ENDIF
	825	ELSE
	826	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	827	TRIM( begin_chr ), averaging_interval, &
	828	dt_averaging_input, 'k', TRIM( slices ), &
	829	TRIM( coordinates )
	830	IF ( skip_time_data_output_av /= 0.0 ) THEN
	831	WRITE ( io, 339 ) skip_time_data_output_av
	832	ENDIF
	833	ENDIF
	834
	835	ENDIF
	836
	837	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	838	i = 1
	839	slices = '/'
	840	coordinates = '/'
	841	!
	842	!-- Building strings with index and coordinate informations of the
	843	!-- slices
	844	DO WHILE ( section(i,2) /= -9999 )
	845
	846	WRITE (section_chr,'(I5)') section(i,2)
	847	section_chr = ADJUSTL( section_chr )
	848	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	849
	850	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	851	coor_chr = ADJUSTL( coor_chr )
	852	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	853
	854	i = i + 1
	855	ENDDO
	856	IF ( av == 0 ) THEN
	857	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	858	TRIM( begin_chr ), 'j', TRIM( slices ), &
	859	TRIM( coordinates )
	860	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	861	WRITE ( io, 339 ) skip_time_do2d_xz
	862	ENDIF
	863	ELSE
	864	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	865	TRIM( begin_chr ), averaging_interval, &
	866	dt_averaging_input, 'j', TRIM( slices ), &
	867	TRIM( coordinates )
	868	IF ( skip_time_data_output_av /= 0.0 ) THEN
	869	WRITE ( io, 339 ) skip_time_data_output_av
	870	ENDIF
	871	ENDIF
	872	ENDIF
	873
	874	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	875	i = 1
	876	slices = '/'
	877	coordinates = '/'
	878	!
	879	!-- Building strings with index and coordinate informations of the
	880	!-- slices
	881	DO WHILE ( section(i,3) /= -9999 )
	882
	883	WRITE (section_chr,'(I5)') section(i,3)
	884	section_chr = ADJUSTL( section_chr )
	885	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	886
	887	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	888	coor_chr = ADJUSTL( coor_chr )
	889	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	890
	891	i = i + 1
	892	ENDDO
	893	IF ( av == 0 ) THEN
	894	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	895	TRIM( begin_chr ), 'i', TRIM( slices ), &
	896	TRIM( coordinates )
	897	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	898	WRITE ( io, 339 ) skip_time_do2d_yz
	899	ENDIF
	900	ELSE
	901	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	902	TRIM( begin_chr ), averaging_interval, &
	903	dt_averaging_input, 'i', TRIM( slices ), &
	904	TRIM( coordinates )
	905	IF ( skip_time_data_output_av /= 0.0 ) THEN
	906	WRITE ( io, 339 ) skip_time_data_output_av
	907	ENDIF
	908	ENDIF
	909	ENDIF
	910
	911	ENDIF
	912
	913	ENDDO
	914
	915	!
	916	!-- 3d-arrays
	917	DO av = 0, 1
	918
	919	i = 1
	920	do3d_chr = ''
	921	DO WHILE ( do3d(av,i) /= ' ' )
	922
	923	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	924	i = i + 1
	925
	926	ENDDO
	927
	928	IF ( do3d_chr /= '' ) THEN
	929	IF ( av == 0 ) THEN
	930	WRITE ( io, 336 ) ''
	931	ELSE
	932	WRITE ( io, 336 ) '(time-averaged)'
	933	ENDIF
	934
	935	output_format = ''
	936	IF ( netcdf_output ) THEN
[292]	937	IF ( netcdf_64bit_3d ) THEN
[1]	938	output_format = 'netcdf (64 bit offset)'
	939	ELSE
	940	output_format = 'netcdf'
	941	ENDIF
	942	ENDIF
	943	IF ( avs_output ) THEN
	944	IF ( netcdf_output ) THEN
	945	output_format = TRIM( output_format ) // ' and avs'
	946	ELSE
	947	output_format = 'avs'
	948	ENDIF
	949	ENDIF
[292]	950	WRITE ( io, 344 ) output_format
[1]	951
	952	IF ( do3d_at_begin ) THEN
	953	begin_chr = 'and at the start'
	954	ELSE
	955	begin_chr = ''
	956	ENDIF
	957	IF ( av == 0 ) THEN
	958	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	959	zu(nz_do3d), nz_do3d
	960	ELSE
	961	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	962	TRIM( begin_chr ), averaging_interval, &
	963	dt_averaging_input, zu(nz_do3d), nz_do3d
	964	ENDIF
	965
	966	IF ( do3d_compress ) THEN
	967	do3d_chr = ''
	968	i = 1
	969	DO WHILE ( do3d(av,i) /= ' ' )
	970
	971	SELECT CASE ( do3d(av,i) )
	972	CASE ( 'u' )
	973	j = 1
	974	CASE ( 'v' )
	975	j = 2
	976	CASE ( 'w' )
	977	j = 3
	978	CASE ( 'p' )
	979	j = 4
	980	CASE ( 'pt' )
	981	j = 5
	982	END SELECT
	983	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	984	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	985	':' // prec // ','
	986	i = i + 1
	987
	988	ENDDO
	989	WRITE ( io, 338 ) do3d_chr
	990
	991	ENDIF
	992
	993	IF ( av == 0 ) THEN
	994	IF ( skip_time_do3d /= 0.0 ) THEN
	995	WRITE ( io, 339 ) skip_time_do3d
	996	ENDIF
	997	ELSE
	998	IF ( skip_time_data_output_av /= 0.0 ) THEN
	999	WRITE ( io, 339 ) skip_time_data_output_av
	1000	ENDIF
	1001	ENDIF
	1002
	1003	ENDIF
	1004
	1005	ENDDO
	1006
	1007	!
[410]	1008	!-- masked arrays
	1009	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1010	mask_scale_x, mask_scale_y, mask_scale_z
	1011	DO mid = 1, masks
	1012	DO av = 0, 1
	1013
	1014	i = 1
	1015	domask_chr = ''
	1016	DO WHILE ( domask(mid,av,i) /= ' ' )
	1017	domask_chr = TRIM( domask_chr ) // ' ' // &
	1018	TRIM( domask(mid,av,i) ) // ','
	1019	i = i + 1
	1020	ENDDO
	1021
	1022	IF ( domask_chr /= '' ) THEN
	1023	IF ( av == 0 ) THEN
	1024	WRITE ( io, 346 ) '', mid
	1025	ELSE
	1026	WRITE ( io, 346 ) ' (time-averaged)', mid
	1027	ENDIF
	1028
	1029	output_format = ''
	1030	IF ( netcdf_output ) THEN
	1031	SELECT CASE ( nc_format_mask(mid,av) )
	1032	CASE ( 1 )
	1033	output_format = 'netcdf (classic format)'
	1034	CASE ( 2 )
	1035	output_format = 'netcdf (64bit offset format)'
	1036	CASE ( 3 )
	1037	output_format = 'netcdf (NetCDF 4 format)'
	1038	CASE ( 4 )
	1039	output_format = 'netcdf (NetCDF 4 classic model format)'
	1040	END SELECT
	1041	ENDIF
	1042	WRITE ( io, 344 ) output_format
	1043
	1044	IF ( av == 0 ) THEN
	1045	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1046	ELSE
	1047	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1048	averaging_interval, dt_averaging_input
	1049	ENDIF
	1050
	1051	IF ( av == 0 ) THEN
	1052	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1053	WRITE ( io, 339 ) skip_time_domask(mid)
	1054	ENDIF
	1055	ELSE
	1056	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1057	WRITE ( io, 339 ) skip_time_data_output_av
	1058	ENDIF
	1059	ENDIF
	1060	!
	1061	!-- output locations
	1062	DO dim = 1, 3
	1063	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1064	count = 0
	1065	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1066	count = count + 1
	1067	ENDDO
	1068	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1069	mask(mid,dim,:count)
	1070	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1071	mask_loop(mid,dim,2) < 0.0 .AND. &
	1072	mask_loop(mid,dim,3) == 0.0 ) THEN
	1073	WRITE ( io, 350 ) dir(dim), dir(dim)
	1074	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1075	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1076	mask_loop(mid,dim,1:2)
	1077	ELSE
	1078	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1079	mask_loop(mid,dim,1:3)
	1080	ENDIF
	1081	ENDDO
	1082	ENDIF
	1083
	1084	ENDDO
	1085	ENDDO
	1086
	1087	!
[1]	1088	!-- Timeseries
	1089	IF ( dt_dots /= 9999999.9 ) THEN
	1090	WRITE ( io, 340 )
	1091
	1092	output_format = ''
	1093	IF ( netcdf_output ) THEN
	1094	IF ( netcdf_64bit ) THEN
	1095	output_format = 'netcdf (64 bit offset)'
	1096	ELSE
	1097	output_format = 'netcdf'
	1098	ENDIF
	1099	ENDIF
	1100	IF ( profil_output ) THEN
	1101	IF ( netcdf_output ) THEN
	1102	output_format = TRIM( output_format ) // ' and profil'
	1103	ELSE
	1104	output_format = 'profil'
	1105	ENDIF
	1106	ENDIF
[292]	1107	WRITE ( io, 344 ) output_format
[1]	1108	WRITE ( io, 341 ) dt_dots
	1109	ENDIF
	1110
	1111	#if defined( __dvrp_graphics )
	1112	!
	1113	!-- Dvrp-output
	1114	IF ( dt_dvrp /= 9999999.9 ) THEN
	1115	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1116	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1117	i = 1
	1118	l = 0
[336]	1119	m = 0
[1]	1120	DO WHILE ( mode_dvrp(i) /= ' ' )
	1121	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1122	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1123	l = l + 1
	1124	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1125	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1126	isosurface_color(:,l)
[1]	1127	ENDIF
	1128	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1129	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1130	m = m + 1
	1131	IF ( do2d(0,j) /= ' ' ) THEN
	1132	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1133	slicer_range_limits_dvrp(:,m)
	1134	ENDIF
[1]	1135	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1136	WRITE ( io, 363 ) dvrp_psize
	1137	IF ( particle_dvrpsize /= 'none' ) THEN
	1138	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1139	dvrpsize_interval
	1140	ENDIF
	1141	IF ( particle_color /= 'none' ) THEN
	1142	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1143	color_interval
	1144	ENDIF
[1]	1145	ENDIF
	1146	i = i + 1
	1147	ENDDO
[237]	1148
[336]	1149	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1150	superelevation_y, superelevation, clip_dvrp_l, &
	1151	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1152
	1153	IF ( TRIM( topography ) /= 'flat' ) THEN
	1154	WRITE ( io, 366 ) topography_color
	1155	IF ( cluster_size > 1 ) THEN
	1156	WRITE ( io, 367 ) cluster_size
	1157	ENDIF
[237]	1158	ENDIF
	1159
[1]	1160	ENDIF
	1161	#endif
	1162
	1163	#if defined( __spectra )
	1164	!
	1165	!-- Spectra output
	1166	IF ( dt_dosp /= 9999999.9 ) THEN
	1167	WRITE ( io, 370 )
	1168
	1169	output_format = ''
	1170	IF ( netcdf_output ) THEN
	1171	IF ( netcdf_64bit ) THEN
	1172	output_format = 'netcdf (64 bit offset)'
	1173	ELSE
	1174	output_format = 'netcdf'
	1175	ENDIF
	1176	ENDIF
	1177	IF ( profil_output ) THEN
	1178	IF ( netcdf_output ) THEN
	1179	output_format = TRIM( output_format ) // ' and profil'
	1180	ELSE
	1181	output_format = 'profil'
	1182	ENDIF
	1183	ENDIF
[292]	1184	WRITE ( io, 344 ) output_format
[1]	1185	WRITE ( io, 371 ) dt_dosp
	1186	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1187	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1188	( spectra_direction(i), i = 1,10 ), &
[189]	1189	( comp_spectra_level(i), i = 1,100 ), &
	1190	( plot_spectra_level(i), i = 1,100 ), &
[1]	1191	averaging_interval_sp, dt_averaging_input_pr
	1192	ENDIF
	1193	#endif
	1194
	1195	WRITE ( io, 99 )
	1196
	1197	!
	1198	!-- Physical quantities
	1199	WRITE ( io, 400 )
	1200
	1201	!
	1202	!-- Geostrophic parameters
	1203	WRITE ( io, 410 ) omega, phi, f, fs
	1204
	1205	!
	1206	!-- Other quantities
	1207	WRITE ( io, 411 ) g
[97]	1208	IF ( use_reference ) THEN
	1209	IF ( ocean ) THEN
	1210	WRITE ( io, 412 ) prho_reference
	1211	ELSE
	1212	WRITE ( io, 413 ) pt_reference
	1213	ENDIF
	1214	ENDIF
[1]	1215
	1216	!
	1217	!-- Cloud physics parameters
	1218	IF ( cloud_physics ) THEN
[57]	1219	WRITE ( io, 415 )
	1220	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1221	ENDIF
	1222
	1223	!-- Profile of the geostrophic wind (component ug)
	1224	!-- Building output strings
	1225	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1226	gradients = '------'
	1227	slices = ' 0'
	1228	coordinates = ' 0.0'
	1229	i = 1
	1230	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1231
[167]	1232	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1233	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1234
[167]	1235	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1236	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1237
[167]	1238	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1239	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1240
[167]	1241	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1242	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1243
[430]	1244	IF ( i == 10 ) THEN
	1245	EXIT
	1246	ELSE
	1247	i = i + 1
	1248	ENDIF
	1249
[1]	1250	ENDDO
	1251
	1252	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1253	TRIM( gradients ), TRIM( slices )
	1254
	1255	!-- Profile of the geostrophic wind (component vg)
	1256	!-- Building output strings
	1257	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1258	gradients = '------'
	1259	slices = ' 0'
	1260	coordinates = ' 0.0'
	1261	i = 1
	1262	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1263
[167]	1264	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1265	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1266
[167]	1267	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1268	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1269
[167]	1270	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1271	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1272
[167]	1273	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1274	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1275
[430]	1276	IF ( i == 10 ) THEN
	1277	EXIT
	1278	ELSE
	1279	i = i + 1
	1280	ENDIF
	1281
[1]	1282	ENDDO
	1283
	1284	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1285	TRIM( gradients ), TRIM( slices )
	1286
	1287	!
	1288	!-- Initial temperature profile
	1289	!-- Building output strings, starting with surface temperature
	1290	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1291	gradients = '------'
	1292	slices = ' 0'
	1293	coordinates = ' 0.0'
	1294	i = 1
	1295	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1296
[94]	1297	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1298	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1299
[94]	1300	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1301	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1302
[94]	1303	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1304	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1305
[94]	1306	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1307	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1308
[430]	1309	IF ( i == 10 ) THEN
	1310	EXIT
	1311	ELSE
	1312	i = i + 1
	1313	ENDIF
	1314
[1]	1315	ENDDO
	1316
	1317	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1318	TRIM( gradients ), TRIM( slices )
	1319
	1320	!
	1321	!-- Initial humidity profile
	1322	!-- Building output strings, starting with surface humidity
[75]	1323	IF ( humidity .OR. passive_scalar ) THEN
[1]	1324	WRITE ( temperatures, '(E8.1)' ) q_surface
	1325	gradients = '--------'
	1326	slices = ' 0'
	1327	coordinates = ' 0.0'
	1328	i = 1
	1329	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1330
	1331	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1332	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1333
	1334	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1335	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1336
	1337	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1338	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1339
	1340	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1341	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1342
[430]	1343	IF ( i == 10 ) THEN
	1344	EXIT
	1345	ELSE
	1346	i = i + 1
	1347	ENDIF
	1348
[1]	1349	ENDDO
	1350
[75]	1351	IF ( humidity ) THEN
[1]	1352	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1353	TRIM( gradients ), TRIM( slices )
	1354	ELSE
	1355	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1356	TRIM( gradients ), TRIM( slices )
	1357	ENDIF
	1358	ENDIF
	1359
	1360	!
[97]	1361	!-- Initial salinity profile
	1362	!-- Building output strings, starting with surface salinity
	1363	IF ( ocean ) THEN
	1364	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1365	gradients = '------'
	1366	slices = ' 0'
	1367	coordinates = ' 0.0'
	1368	i = 1
	1369	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1370
	1371	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1372	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1373
	1374	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1375	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1376
	1377	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1378	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1379
	1380	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1381	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1382
[430]	1383	IF ( i == 10 ) THEN
	1384	EXIT
	1385	ELSE
	1386	i = i + 1
	1387	ENDIF
	1388
[97]	1389	ENDDO
	1390
	1391	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1392	TRIM( gradients ), TRIM( slices )
	1393	ENDIF
	1394
	1395	!
[411]	1396	!-- Profile for the large scale vertial velocity
	1397	!-- Building output strings, starting with surface value
	1398	IF ( large_scale_subsidence ) THEN
	1399	temperatures = ' 0.0'
	1400	gradients = '------'
	1401	slices = ' 0'
	1402	coordinates = ' 0.0'
	1403	i = 1
	1404	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
	1405
	1406	WRITE (coor_chr,'(E10.2,7X)') &
	1407	w_subs(ws_vertical_gradient_level_ind(i))
	1408	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1409
	1410	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
	1411	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1412
	1413	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
	1414	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1415
	1416	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
	1417	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1418
[430]	1419	IF ( i == 10 ) THEN
	1420	EXIT
	1421	ELSE
	1422	i = i + 1
	1423	ENDIF
	1424
[411]	1425	ENDDO
	1426
	1427	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1428	TRIM( gradients ), TRIM( slices )
	1429	ENDIF
	1430
	1431	!
[1]	1432	!-- LES / turbulence parameters
	1433	WRITE ( io, 450 )
	1434
	1435	!--
	1436	! ... LES-constants used must still be added here
	1437	!--
	1438	IF ( constant_diffusion ) THEN
	1439	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1440	prandtl_number
	1441	ENDIF
	1442	IF ( .NOT. constant_diffusion) THEN
[108]	1443	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1444	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1445	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1446	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1447	ENDIF
	1448
	1449	!
	1450	!-- Special actions during the run
	1451	WRITE ( io, 470 )
	1452	IF ( create_disturbances ) THEN
	1453	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1454	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1455	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1456	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1457	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1458	ELSE
	1459	WRITE ( io, 473 ) disturbance_energy_limit
	1460	ENDIF
	1461	WRITE ( io, 474 ) TRIM( random_generator )
	1462	ENDIF
	1463	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1464	WRITE ( io, 475 ) pt_surface_initial_change
	1465	ENDIF
[75]	1466	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1467	WRITE ( io, 476 ) q_surface_initial_change
	1468	ENDIF
	1469	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1470	WRITE ( io, 477 ) q_surface_initial_change
	1471	ENDIF
	1472
[60]	1473	IF ( particle_advection ) THEN
[1]	1474	!
[60]	1475	!-- Particle attributes
	1476	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1477	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1478	end_time_prel, dt_sort_particles
[60]	1479	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1480	IF ( random_start_position ) WRITE ( io, 481 )
	1481	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1482	WRITE ( io, 495 ) total_number_of_particles
	1483	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1484	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1485	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1486	WRITE ( io, 484 ) total_number_of_tails, &
	1487	minimum_tailpoint_distance, &
	1488	maximum_tailpoint_age
	1489	ENDIF
[1]	1490	ENDIF
[60]	1491	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1492	WRITE ( io, 485 ) dt_write_particle_data
	1493	output_format = ''
	1494	IF ( netcdf_output ) THEN
	1495	IF ( netcdf_64bit ) THEN
	1496	output_format = 'netcdf (64 bit offset) and binary'
	1497	ELSE
	1498	output_format = 'netcdf and binary'
	1499	ENDIF
[1]	1500	ELSE
[60]	1501	output_format = 'binary'
[1]	1502	ENDIF
[292]	1503	WRITE ( io, 344 ) output_format
[1]	1504	ENDIF
[60]	1505	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1506	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1507
[60]	1508	WRITE ( io, 487 ) number_of_particle_groups
[1]	1509
[60]	1510	DO i = 1, number_of_particle_groups
	1511	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1512	WRITE ( io, 490 ) i, 0.0
	1513	WRITE ( io, 492 )
[1]	1514	ELSE
[60]	1515	WRITE ( io, 490 ) i, radius(i)
	1516	IF ( density_ratio(i) /= 0.0 ) THEN
	1517	WRITE ( io, 491 ) density_ratio(i)
	1518	ELSE
	1519	WRITE ( io, 492 )
	1520	ENDIF
[1]	1521	ENDIF
[60]	1522	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1523	pdx(i), pdy(i), pdz(i)
[336]	1524	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1525	ENDDO
[1]	1526
[60]	1527	ENDIF
[1]	1528
[60]	1529
[1]	1530	!
	1531	!-- Parameters of 1D-model
	1532	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1533	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1534	mixing_length_1d, dissipation_1d
	1535	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1536	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1537	ENDIF
	1538	ENDIF
	1539
	1540	!
	1541	!-- User-defined informations
	1542	CALL user_header( io )
	1543
	1544	WRITE ( io, 99 )
	1545
	1546	!
	1547	!-- Write buffer contents to disc immediately
[82]	1548	CALL local_flush( io )
[1]	1549
	1550	!
	1551	!-- Here the FORMATs start
	1552
	1553	99 FORMAT (1X,78('-'))
[200]	1554	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1555	1X,'* ',A,' *',9X,A/ &
	1556	1X,'***************************',9X,42('-'))
[291]	1557	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1558	37X,42('-'))
[200]	1559	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1560	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1561	' Run on host: ',A10)
[1]	1562	#if defined( __parallel )
[200]	1563	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1564	')',1X,A)
[200]	1565	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1566	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1567	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1568	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1569	37X,'because the job is running on an SMP-cluster')
[102]	1570	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1571	#endif
	1572	110 FORMAT (/' Numerical Schemes:'/ &
	1573	' -----------------'/)
	1574	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1575	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1576	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1577	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1578	' or Upstream')
	1579	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1580	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1581	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1582	' or Upstream')
	1583	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1584	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1585	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1586	' Translation velocity = ',A/ &
	1587	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1588	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1589	' of timestep changes)')
	1590	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1591	' timestep changes')
	1592	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1593	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1594	' maximum damping coefficient: ',F5.3, ' 1/s')
	1595	124 FORMAT (' Spline-overshoots are being suppressed')
	1596	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1597	' of'/ &
	1598	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1599	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1600	' of'/ &
	1601	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1602	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1603	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1604	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1605	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1606	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1607	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1608	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1609	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1610	' effective emissivity scheme')
	1611	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1612	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1613	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1614	A,'-cycle)'/ &
	1615	' number of grid levels: ',I2/ &
	1616	' Gauss-Seidel red/black iterations: ',I2)
	1617	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1618	I3,')')
	1619	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1620	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1621	I3,')'/ &
	1622	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1623	I3,')')
	1624	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1625	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1626	140 FORMAT (' maximum residual allowed: ',E10.3)
	1627	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1628	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1629	'step')
[87]	1630	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1631	'kinetic energy')
[1]	1632	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1633	'conserved'/ &
	1634	' using the ',A,' mode')
	1635	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1636	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1637	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1638	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1639	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1640	'prognostic equation for')
	1641	154 FORMAT (' the potential temperature')
[1]	1642	200 FORMAT (//' Run time and time step information:'/ &
	1643	' ----------------------------------'/)
	1644	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1645	' CFL-factor: ',F4.2)
	1646	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1647	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1648	' End time: ',F9.3,' s')
	1649	204 FORMAT ( A,F9.3,' s')
	1650	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1651	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1652	' CPU-time used: ',F9.3,' s per timestep: ', &
	1653	' ',F9.3,' s'/ &
	1654	' per second of simulated tim', &
	1655	'e: ',F9.3,' s')
[291]	1656	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1657	250 FORMAT (//' Computational grid and domain size:'/ &
	1658	' ----------------------------------'// &
	1659	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1660	' m dz = ',F7.3,' m'/ &
	1661	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1662	' m z(u) = ',F10.3,' m'/)
	1663	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1664	' factor: ',F5.3/ &
	1665	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1666	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1667	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1668	255 FORMAT (' Subdomains have equal size')
	1669	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1670	'have smaller sizes'/ &
	1671	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1672	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1673	' degrees')
	1674	270 FORMAT (//' Topography informations:'/ &
	1675	' -----------------------'// &
	1676	1X,'Topography: ',A)
	1677	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1678	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1679	' / ',I4)
[240]	1680	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1681	' direction' / &
	1682	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1683	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1684	278 FORMAT (' Topography grid definition convention:'/ &
	1685	' cell edge (staggered grid points'/ &
	1686	' (u in x-direction, v in y-direction))' /)
	1687	279 FORMAT (' Topography grid definition convention:'/ &
	1688	' cell center (scalar grid points)' /)
[138]	1689	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1690	' ------------------------------'// &
	1691	' Canopy mode: ', A / &
	1692	' Canopy top: ',I4 / &
	1693	' Leaf drag coefficient: ',F6.2 /)
[153]	1694	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1695	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1696	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1697	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1698	' Height: ',A,' m'/ &
	1699	' Leaf area density: ',A,' m2/m3'/ &
	1700	' Gradient: ',A,' m2/m4'/ &
	1701	' Gridpoint: ',A)
	1702
[1]	1703	300 FORMAT (//' Boundary conditions:'/ &
	1704	' -------------------'// &
	1705	' p uv ', &
	1706	' pt'// &
	1707	' B. bound.: ',A/ &
	1708	' T. bound.: ',A)
[97]	1709	301 FORMAT (/' ',A// &
[1]	1710	' B. bound.: ',A/ &
	1711	' T. bound.: ',A)
[19]	1712	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1713	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1714	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1715	'computational u,v-level:'// &
[1]	1716	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1717	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1718	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1719	307 FORMAT (' Heatflux has a random normal distribution')
	1720	308 FORMAT (' Predefined surface temperature')
[97]	1721	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1722	310 FORMAT (//' 1D-Model:'// &
	1723	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1724	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1725	312 FORMAT (' Predefined surface humidity')
	1726	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1727	314 FORMAT (' Predefined scalar value at the surface')
[19]	1728	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1729	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1730	'atmosphere model')
[1]	1731	317 FORMAT (//' Lateral boundaries:'/ &
	1732	' left/right: ',A/ &
	1733	' north/south: ',A)
	1734	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1735	'max =',F5.1,' m**2/s')
[151]	1736	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1737	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1738	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1739	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1740	' v: ',F9.6,' m2/s2')
[151]	1741	325 FORMAT (//' List output:'/ &
[1]	1742	' -----------'// &
	1743	' 1D-Profiles:'/ &
	1744	' Output every ',F8.2,' s')
[151]	1745	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1746	' Averaging input every ',F8.2,' s')
	1747	330 FORMAT (//' Data output:'/ &
	1748	' -----------'/)
	1749	331 FORMAT (/' 1D-Profiles:')
	1750	332 FORMAT (/' ',A)
	1751	333 FORMAT (' Output every ',F8.2,' s',/ &
	1752	' Time averaged over ',F8.2,' s'/ &
	1753	' Averaging input every ',F8.2,' s')
	1754	334 FORMAT (/' 2D-Arrays',A,':')
	1755	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1756	' Output every ',F8.2,' s ',A/ &
	1757	' Cross sections at ',A1,' = ',A/ &
	1758	' scalar-coordinates: ',A,' m'/)
	1759	336 FORMAT (/' 3D-Arrays',A,':')
	1760	337 FORMAT (/' Arrays: ',A/ &
	1761	' Output every ',F8.2,' s ',A/ &
	1762	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1763	338 FORMAT (' Compressed data output'/ &
	1764	' Decimal precision: ',A/)
	1765	339 FORMAT (' No output during initial ',F8.2,' s')
	1766	340 FORMAT (/' Time series:')
	1767	341 FORMAT (' Output every ',F8.2,' s'/)
	1768	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1769	' Output every ',F8.2,' s ',A/ &
	1770	' Time averaged over ',F8.2,' s'/ &
	1771	' Averaging input every ',F8.2,' s'/ &
	1772	' Cross sections at ',A1,' = ',A/ &
	1773	' scalar-coordinates: ',A,' m'/)
	1774	343 FORMAT (/' Arrays: ',A/ &
	1775	' Output every ',F8.2,' s ',A/ &
	1776	' Time averaged over ',F8.2,' s'/ &
	1777	' Averaging input every ',F8.2,' s'/ &
	1778	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1779	344 FORMAT (' Output format: ',A/)
[410]	1780	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1781	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1782	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1783	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1784	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1785	347 FORMAT (' Variables: ',A/ &
	1786	' Output every ',F8.2,' s')
	1787	348 FORMAT (' Variables: ',A/ &
	1788	' Output every ',F8.2,' s'/ &
	1789	' Time averaged over ',F8.2,' s'/ &
	1790	' Averaging input every ',F8.2,' s')
	1791	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1792	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1793	13(' ',8(F8.2,',')/) )
	1794	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1795	'all gridpoints along ',A,'-direction (default).' )
	1796	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1797	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1798	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1799	#if defined( __dvrp_graphics )
	1800	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1801	' Output every ',F7.1,' s'/ &
	1802	' Output mode: ',A/ &
	1803	' Host / User: ',A,' / ',A/ &
	1804	' Directory: ',A// &
	1805	' The sequence contains:')
[337]	1806	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1807	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1808	362 FORMAT (/' Slicer plane ',A/ &
[336]	1809	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1810	363 FORMAT (/' Particles'/ &
[336]	1811	' particle size: ',F7.2,' m')
	1812	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1813	F6.2,',',F6.2,']')
[337]	1814	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1815	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1816	')'/ &
	1817	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1818	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1819	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1820	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1821	#endif
	1822	#if defined( __spectra )
	1823	370 FORMAT (' Spectra:')
	1824	371 FORMAT (' Output every ',F7.1,' s'/)
	1825	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1826	' Directions: ', 10(A5,',')/ &
[189]	1827	' height levels k = ', 20(I3,',')/ &
	1828	' ', 20(I3,',')/ &
	1829	' ', 20(I3,',')/ &
	1830	' ', 20(I3,',')/ &
	1831	' ', 19(I3,','),I3,'.'/ &
[1]	1832	' height levels selected for standard plot:'/ &
[189]	1833	' k = ', 20(I3,',')/ &
	1834	' ', 20(I3,',')/ &
	1835	' ', 20(I3,',')/ &
	1836	' ', 20(I3,',')/ &
	1837	' ', 19(I3,','),I3,'.'/ &
[1]	1838	' Time averaged over ', F7.1, ' s,' / &
	1839	' Profiles for the time averaging are taken every ', &
	1840	F6.1,' s')
	1841	#endif
	1842	400 FORMAT (//' Physical quantities:'/ &
	1843	' -------------------'/)
	1844	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1845	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1846	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1847	' f* = ',F9.6,' 1/s')
	1848	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1849	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1850	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1851	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1852	' ------------------------'/)
[57]	1853	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1854	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1855	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1856	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1857	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1858	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1859	' Height: ',A,' m'/ &
	1860	' Temperature: ',A,' K'/ &
	1861	' Gradient: ',A,' K/100m'/ &
	1862	' Gridpoint: ',A)
	1863	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1864	' Height: ',A,' m'/ &
	1865	' Humidity: ',A,' kg/kg'/ &
	1866	' Gradient: ',A,' (kg/kg)/100m'/ &
	1867	' Gridpoint: ',A)
	1868	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1869	' Height: ',A,' m'/ &
	1870	' Scalar concentration: ',A,' kg/m**3'/ &
	1871	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1872	' Gridpoint: ',A)
	1873	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1874	' Height: ',A,' m'/ &
	1875	' ug: ',A,' m/s'/ &
	1876	' Gradient: ',A,' 1/100s'/ &
	1877	' Gridpoint: ',A)
	1878	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1879	' Height: ',A,' m'/ &
[97]	1880	' vg: ',A,' m/s'/ &
[1]	1881	' Gradient: ',A,' 1/100s'/ &
	1882	' Gridpoint: ',A)
[97]	1883	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1884	' Height: ',A,' m'/ &
	1885	' Salinity: ',A,' psu'/ &
	1886	' Gradient: ',A,' psu/100m'/ &
	1887	' Gridpoint: ',A)
[411]	1888	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1889	' Height: ',A,' m'/ &
	1890	' w_subs: ',A,' m/s'/ &
	1891	' Gradient: ',A,' (m/s)/100m'/ &
	1892	' Gridpoint: ',A)
[1]	1893	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1894	' ---------------------------'/)
	1895	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1896	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1897	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1898	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1899	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1900	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1901	470 FORMAT (//' Actions during the simulation:'/ &
	1902	' -----------------------------'/)
[94]	1903	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1904	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1905	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1906	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1907	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1908	' to i/j =',I4)
	1909	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1910	1X,F5.3, ' m2/s2')
	1911	474 FORMAT (' Random number generator used : ',A/)
	1912	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1913	'respectively, if'/ &
	1914	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1915	' 3D-simulation'/)
	1916	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1917	'respectively, if the'/ &
	1918	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1919	' the 3D-simulation'/)
	1920	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1921	'respectively, if the'/ &
	1922	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1923	' the 3D-simulation'/)
	1924	480 FORMAT (' Particles:'/ &
	1925	' ---------'// &
	1926	' Particle advection is active (switched on at t = ', F7.1, &
	1927	' s)'/ &
	1928	' Start of new particle generations every ',F6.1,' s'/ &
	1929	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1930	' bottom: ', A, ' top: ', A/&
	1931	' Maximum particle age: ',F9.1,' s'/ &
[117]	1932	' Advection stopped at t = ',F9.1,' s'/ &
	1933	' Particles are sorted every ',F9.1,' s'/)
[1]	1934	481 FORMAT (' Particles have random start positions'/)
[336]	1935	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1936	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1937	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1938	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1939	' Maximum age of the end of the tail: ',F8.2,' s')
	1940	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1941	486 FORMAT (' Particle statistics are written on file'/)
	1942	487 FORMAT (' Number of particle groups: ',I2/)
	1943	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1944	' minimum timestep for advection: ', F7.5/)
	1945	489 FORMAT (' Number of particles simultaneously released at each ', &
	1946	'point: ', I5/)
	1947	490 FORMAT (' Particle group ',I2,':'/ &
	1948	' Particle radius: ',E10.3, 'm')
	1949	491 FORMAT (' Particle inertia is activated'/ &
	1950	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1951	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1952	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1953	' y:',F8.1,' - ',F8.1,' m'/&
	1954	' z:',F8.1,' - ',F8.1,' m'/&
	1955	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1956	' m dz = ',F8.1,' m'/)
	1957	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1958	F8.2,' s'/)
	1959	495 FORMAT (' Number of particles in total domain: ',I10/)
	1960	500 FORMAT (//' 1D-Model parameters:'/ &
	1961	' -------------------'// &
	1962	' Simulation time: ',F8.1,' s'/ &
	1963	' Run-controll output every: ',F8.1,' s'/ &
	1964	' Vertical profile output every: ',F8.1,' s'/ &
	1965	' Mixing length calculation: ',A/ &
	1966	' Dissipation calculation: ',A/)
	1967	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1968
	1969
	1970	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 483

Download in other formats: