Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 4631

Last change on this file since 4631 was 4586, checked in by gronemeier, 4 years ago
renamed Richardson flux number into gradient Richardson number (model_1d_mod.f90, turbulence_closure_mod.f90, header.f90, surface_mod.f90) and zeta (header.f90); do not add whitespaces at current-revision section (document_changes)
Property svn:keywords set to `Id`
File size: 77.9 KB

Rev	Line
[4017]	1	! !> @file header.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[4586]	22	!
	23	!
[3589]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 4586 2020-07-01 16:16:43Z suehring $
[4586]	27	! Renamed rif to Ri (gradient Richardson number, 1D model)
	28	! and zeta (= z_mo / ol, stability parameter, 3D model)
	29	!
	30	! 4573 2020-06-24 13:08:47Z oliver.maas
[4573]	31	! added statement for pt_surface_heating_rate
[4586]	32	!
[4573]	33	! 4536 2020-05-17 17:24:13Z raasch
[4536]	34	! output of restart data format added
[4586]	35	!
[4536]	36	! 4473 2020-03-25 21:04:07Z gronemeier
[4473]	37	! revised message if wall_adjustment is used
[4586]	38	!
[4473]	39	! 4444 2020-03-05 15:59:50Z raasch
[4444]	40	! bugfix: cpp-directives for serial mode added
[4586]	41	!
[4444]	42	! 4360 2020-01-07 11:25:50Z suehring
[4339]	43	! Bugfix, character length too short, caused crash on NEC.
[4586]	44	!
[4339]	45	! 4309 2019-11-26 18:49:59Z suehring
[4309]	46	! replaced recycling_yshift by y_shift
[4586]	47	!
[4309]	48	! 4301 2019-11-22 12:09:09Z oliver.maas
[4301]	49	!
	50	! 4297 2019-11-21 10:37:50Z oliver.maas
[4300]	51	! Adjusted format for simulated time and related quantities
[4586]	52	!
[4300]	53	! 4297 2019-11-21 10:37:50Z oliver.maas
[4297]	54	! adjusted message to the changed parameter recycling_yshift
[4586]	55	!
[4297]	56	! 4227 2019-09-10 18:04:34Z gronemeier
[4227]	57	! implement new palm_date_time_mod
[4586]	58	!
[4227]	59	! 4223 2019-09-10 09:20:47Z gronemeier
[4196]	60	! Write information about rotation angle
[4586]	61	!
[4196]	62	! 4182 2019-08-22 15:20:23Z scharf
[4182]	63	! Corrected "Former revisions" section
[4586]	64	!
[4182]	65	! 4168 2019-08-16 13:50:17Z suehring
[4168]	66	! Replace function get_topography_top_index by topo_top_ind
[4586]	67	!
[4168]	68	! 4069 2019-07-01 14:05:51Z Giersch
[4586]	69	! Masked output running index mid has been introduced as a local variable to
	70	! avoid runtime error (Loop variable has been modified) in time_integration
	71	!
[4069]	72	! 4023 2019-06-12 13:20:01Z maronga
[4023]	73	! Renamed "coupling start time" to "spinup time"
[4586]	74	!
[4023]	75	! 4017 2019-06-06 12:16:46Z schwenkel
[3761]	76	! unused variable removed
[4586]	77	!
[3761]	78	! 3655 2019-01-07 16:51:22Z knoop
[3637]	79	! Implementation of the PALM module interface
[3298]	80	!
[4182]	81	! Revision 1.1 1997/08/11 06:17:20 raasch
	82	! Initial revision
	83	!
	84	!
[1]	85	! Description:
	86	! ------------
[1764]	87	!> Writing a header with all important information about the current run.
[4586]	88	!> This subroutine is called three times, two times at the beginning
[1682]	89	!> (writing information on files RUN_CONTROL and HEADER) and one time at the
	90	!> end of the run, then writing additional information about CPU-usage on file
	91	!> header.
[411]	92	!-----------------------------------------------------------------------------!
[1682]	93	SUBROUTINE header
[1]	94
[4586]	95
[1320]	96	USE arrays_3d, &
[2232]	97	ONLY: pt_init, q_init, s_init, sa_init, ug, vg, w_subs, zu, zw
[3274]	98
	99	USE basic_constants_and_equations_mod, &
[3761]	100	ONLY: g, kappa
[3274]	101
	102	USE bulk_cloud_model_mod, &
[3637]	103	ONLY: bulk_cloud_model
[3274]	104
[1]	105	USE control_parameters
[1849]	106
[1320]	107	USE cpulog, &
	108	ONLY: log_point_s
[3298]	109
[1320]	110	USE grid_variables, &
	111	ONLY: dx, dy
[2817]	112
[1320]	113	USE indices, &
	114	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
[4168]	115	nys_mg, nzt, nzt_mg, topo_top_ind
[3637]	116
[1320]	117	USE kinds
[1849]	118
[2338]	119	USE model_1d_mod, &
[1320]	120	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
[2338]	121
[3637]	122	USE module_interface, &
	123	ONLY: module_interface_header
	124
[1783]	125	USE netcdf_interface, &
	126	ONLY: netcdf_data_format, netcdf_data_format_string, netcdf_deflate
[3448]	127
[3294]	128	USE ocean_mod, &
[3637]	129	ONLY: ibc_sa_t, prho_reference, sa_surface, &
[3302]	130	sa_vertical_gradient, sa_vertical_gradient_level, &
	131	sa_vertical_gradient_level_ind
[3294]	132
[4227]	133	USE palm_date_time_mod, &
	134	ONLY: get_date_time
	135
[1]	136	USE pegrid
[1484]	137
[2967]	138	#if defined( __parallel )
[1791]	139	USE pmc_handle_communicator, &
	140	ONLY: pmc_get_model_info
	141
[1764]	142	USE pmc_interface, &
[1797]	143	ONLY: nested_run, nesting_datatransfer_mode, nesting_mode
[4444]	144	#endif
[1764]	145
[2232]	146	USE surface_mod, &
[4168]	147	ONLY: surf_def_h
[2232]	148
[3083]	149	USE turbulence_closure_mod, &
	150	ONLY: rans_const_c, rans_const_sigma
	151
[1]	152	IMPLICIT NONE
	153
[4586]	154
[3552]	155	CHARACTER (LEN=2) :: do2d_mode !< mode of 2D data output (xy, xz, yz)
[4586]	156
[3552]	157	CHARACTER (LEN=5) :: section_chr !< string indicating grid information where to output 2D slices
[4586]	158
[3552]	159	CHARACTER (LEN=10) :: host_chr !< string for hostname
[4586]	160
[3552]	161	CHARACTER (LEN=16) :: begin_chr !< string indication start time for the data output
[4339]	162	CHARACTER (LEN=16) :: coor_chr !< dummy string
[4586]	163
[3552]	164	CHARACTER (LEN=26) :: ver_rev !< string for run identification
[1791]	165
[4444]	166	#if defined( __parallel )
[4586]	167	CHARACTER (LEN=32) :: cpl_name !< name of child domain (nesting mode only)
[4444]	168	#endif
[4586]	169
[3552]	170	CHARACTER (LEN=40) :: output_format !< netcdf format
[4586]	171
[3552]	172	CHARACTER (LEN=70) :: char1 !< dummy varialbe used for various strings
	173	CHARACTER (LEN=70) :: char2 !< string containing informating about the advected distance in case of Galilei transformation
[4227]	174	CHARACTER (LEN=23) :: date_time_str !< string for date and time information
[3552]	175	CHARACTER (LEN=70) :: dopr_chr !< string indicating profile output variables
	176	CHARACTER (LEN=70) :: do2d_xy !< string indicating 2D-xy output variables
	177	CHARACTER (LEN=70) :: do2d_xz !< string indicating 2D-xz output variables
	178	CHARACTER (LEN=70) :: do2d_yz !< string indicating 2D-yz output variables
	179	CHARACTER (LEN=70) :: do3d_chr !< string indicating 3D output variables
	180	CHARACTER (LEN=70) :: domask_chr !< string indicating masked output variables
[4586]	181	CHARACTER (LEN=70) :: run_classification !< string classifying type of run, e.g. nested, coupled, etc.
	182
[3552]	183	CHARACTER (LEN=85) :: r_upper !< string indicating model top boundary condition for various quantities
	184	CHARACTER (LEN=85) :: r_lower !< string indicating bottom boundary condition for various quantities
[4586]	185
[3552]	186	CHARACTER (LEN=86) :: coordinates !< string indicating height coordinates for profile-prescribed variables
	187	CHARACTER (LEN=86) :: gradients !< string indicating gradients of profile-prescribed variables between the prescribed height coordinates
	188	CHARACTER (LEN=86) :: slices !< string indicating grid coordinates of profile-prescribed subsidence velocity
	189	CHARACTER (LEN=86) :: temperatures !< string indicating profile-prescribed subsidence velocities
	190	CHARACTER (LEN=86) :: ugcomponent !< string indicating profile-prescribed geostrophic u-component
	191	CHARACTER (LEN=86) :: vgcomponent !< string indicating profile-prescribed geostrophic v-component
[1]	192
[3552]	193	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !< string indicating masking steps along certain direction
[410]	194
[3552]	195	INTEGER(iwp) :: av !< index indicating average output quantities
	196	INTEGER(iwp) :: bh !< building height in generic single-building setup
	197	INTEGER(iwp) :: blx !< building width in grid points along x in generic single-building setup
	198	INTEGER(iwp) :: bly !< building width in grid points along y in generic single-building setup
	199	INTEGER(iwp) :: bxl !< index for left building wall in generic single-building setup
	200	INTEGER(iwp) :: bxr !< index for right building wall in generic single-building setup
	201	INTEGER(iwp) :: byn !< index for north building wall in generic single-building setup
	202	INTEGER(iwp) :: bys !< index for south building wall in generic single-building setup
	203	INTEGER(iwp) :: ch !< canyon depth in generic street-canyon setup
	204	INTEGER(iwp) :: count !< number of masked output locations
	205	INTEGER(iwp) :: cwx !< canyon width along x in generic street-canyon setup
	206	INTEGER(iwp) :: cwy !< canyon width along y in generic street-canyon setup
	207	INTEGER(iwp) :: cxl !< index for left canyon wall in generic street-canyon setup
	208	INTEGER(iwp) :: cxr !< index for right canyon wall in generic street-canyon setup
	209	INTEGER(iwp) :: cyn !< index for north canyon wall in generic street-canyon setup
	210	INTEGER(iwp) :: cys !< index for south canyon wall in generic street-canyon setup
	211	INTEGER(iwp) :: dim !< running index for masking output locations
	212	INTEGER(iwp) :: i !< running index for various loops
	213	INTEGER(iwp) :: io !< file unit of HEADER file
	214	INTEGER(iwp) :: l !< substring length
	215	INTEGER(iwp) :: ll !< substring length
[4069]	216	INTEGER(iwp) :: mid !< masked output running index
[4444]	217	#if defined( __parallel )
	218	INTEGER(iwp) :: cpl_parent_id !< parent ID for the respective child model
[3552]	219	INTEGER(iwp) :: my_cpl_id !< run id in a nested model setup
	220	INTEGER(iwp) :: n !< running index over number of couplers in a nested model setup
	221	INTEGER(iwp) :: ncpl !< number of coupler in a nested model setup
	222	INTEGER(iwp) :: npe_total !< number of total PEs in a coupler (parent + child)
[4444]	223	#endif
[1826]	224
[4586]	225
[3552]	226	REAL(wp) :: cpuseconds_per_simulated_second !< CPU time (in s) per simulated second
[4444]	227	#if defined( __parallel )
[1791]	228	REAL(wp) :: lower_left_coord_x !< x-coordinate of nest domain
	229	REAL(wp) :: lower_left_coord_y !< y-coordinate of nest domain
[4444]	230	#endif
[1]	231
	232	!
	233	!-- Open the output file. At the end of the simulation, output is directed
	234	!-- to unit 19.
	235	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	236	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	237	io = 15 ! header output on file RUN_CONTROL
	238	ELSE
	239	io = 19 ! header output on file HEADER
	240	ENDIF
	241	CALL check_open( io )
	242
	243	!
	244	!-- At the end of the run, output file (HEADER) will be rewritten with
[1551]	245	!-- new information
[1]	246	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	247
	248	!
	249	!-- Determine kind of model run
	250	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
[1764]	251	run_classification = 'restart run'
[328]	252	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
[1764]	253	run_classification = 'run with cyclic fill of 3D - prerun data'
[147]	254	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
[1764]	255	run_classification = 'run without 1D - prerun'
[197]	256	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[1764]	257	run_classification = 'run with 1D - prerun'
[2696]	258	ELSEIF ( INDEX( initializing_actions, 'inifor' ) /= 0 ) THEN
	259	run_classification = 'run initialized with COSMO data'
[197]	260	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
[1764]	261	run_classification = 'run initialized by user'
[3045]	262	ELSEIF ( INDEX( initializing_actions, 'initialize_vortex' ) /=0 ) THEN
	263	run_classification = 'run additionally initialized by a Rankine-vortex'
	264	ELSEIF ( INDEX( initializing_actions, 'initialize_ptanom' ) /=0 ) THEN
	265	run_classification = 'run additionally initialized by temperature anomaly'
[1]	266	ELSE
[254]	267	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	268	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	269	ENDIF
[4444]	270	#if defined( __parallel )
[3241]	271	IF ( nested_run ) run_classification = 'nested ' // run_classification(1:63)
[4444]	272	#endif
[3294]	273	IF ( ocean_mode ) THEN
[3241]	274	run_classification = 'ocean - ' // run_classification(1:61)
[97]	275	ELSE
[3241]	276	run_classification = 'atmosphere - ' // run_classification(1:57)
[97]	277	ENDIF
[1]	278
	279	!
	280	!-- Run-identification, date, time, host
	281	host_chr = host(1:10)
[75]	282	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	283	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	284	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
[2298]	285	WRITE ( io, 101 ) coupling_mode
[291]	286	ENDIF
[1108]	287	#if defined( __parallel )
[2299]	288	IF ( coupling_start_time /= 0.0_wp .AND. .NOT. spinup ) THEN
[1106]	289	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	290	WRITE ( io, 109 )
	291	ELSE
	292	WRITE ( io, 114 )
	293	ENDIF
	294	ENDIF
[1108]	295	#endif
[1429]	296	IF ( ensemble_member_nr /= 0 ) THEN
	297	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
	298	ADJUSTR( host_chr ), ensemble_member_nr
	299	ELSE
	300	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
[102]	301	ADJUSTR( host_chr )
[1429]	302	ENDIF
[1]	303	#if defined( __parallel )
[1482]	304	IF ( npex == -1 .AND. npey == -1 ) THEN
[1]	305	char1 = 'calculated'
	306	ELSE
	307	char1 = 'predefined'
	308	ENDIF
	309	IF ( threads_per_task == 1 ) THEN
[102]	310	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	311	ELSE
[102]	312	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	313	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	314	ENDIF
[2300]	315
	316	IF ( pdims(2) == 1 ) THEN
[102]	317	WRITE ( io, 107 ) 'x'
[1]	318	ELSEIF ( pdims(1) == 1 ) THEN
[102]	319	WRITE ( io, 107 ) 'y'
[1]	320	ENDIF
[759]	321	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	322	WRITE ( io, 108 ) maximum_parallel_io_streams
	323	ENDIF
[1]	324	#endif
[1764]	325
[4444]	326	#if defined( __parallel )
[1764]	327	!
	328	!-- Nesting informations
	329	IF ( nested_run ) THEN
[1791]	330
[1797]	331	WRITE ( io, 600 ) TRIM( nesting_mode ), &
	332	TRIM( nesting_datatransfer_mode )
[1791]	333	CALL pmc_get_model_info( ncpl = ncpl, cpl_id = my_cpl_id )
	334
	335	DO n = 1, ncpl
	336	CALL pmc_get_model_info( request_for_cpl_id = n, cpl_name = cpl_name,&
	337	cpl_parent_id = cpl_parent_id, &
	338	lower_left_x = lower_left_coord_x, &
	339	lower_left_y = lower_left_coord_y, &
	340	npe_total = npe_total )
	341	IF ( n == my_cpl_id ) THEN
	342	char1 = '*'
	343	ELSE
	344	char1 = ' '
	345	ENDIF
	346	WRITE ( io, 601 ) TRIM( char1 ), n, cpl_parent_id, npe_total, &
	347	lower_left_coord_x, lower_left_coord_y, &
	348	TRIM( cpl_name )
	349	ENDDO
[4444]	350
	351	ENDIF
[2967]	352	#endif
	353
[1]	354	WRITE ( io, 99 )
	355
	356	!
	357	!-- Numerical schemes
	358	WRITE ( io, 110 )
[2696]	359	IF ( rans_mode ) THEN
	360	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'RANS'
	361	ELSE
	362	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'LES'
	363	ENDIF
[2037]	364	WRITE ( io, 121 ) TRIM( approximation )
[1]	365	IF ( psolver(1:7) == 'poisfft' ) THEN
	366	WRITE ( io, 111 ) TRIM( fft_method )
[1216]	367	IF ( transpose_compute_overlap ) WRITE( io, 115 )
[1]	368	ELSEIF ( psolver == 'sor' ) THEN
	369	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
[1575]	370	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
	371	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
[1]	372	IF ( mg_cycles == -1 ) THEN
	373	WRITE ( io, 140 ) residual_limit
	374	ELSE
	375	WRITE ( io, 141 ) mg_cycles
	376	ENDIF
	377	IF ( mg_switch_to_pe0_level == 0 ) THEN
	378	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	379	nzt_mg(1)
[197]	380	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	381	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	382	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	383	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	384	nzt_mg(mg_switch_to_pe0_level), &
	385	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	386	nzt_mg(1)
	387	ENDIF
[1931]	388	IF ( psolver == 'multigrid_noopt' .AND. masking_method ) WRITE ( io, 144 )
[1]	389	ENDIF
	390	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	391	THEN
	392	WRITE ( io, 142 )
	393	ENDIF
	394
	395	IF ( momentum_advec == 'pw-scheme' ) THEN
	396	WRITE ( io, 113 )
[1299]	397	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
[667]	398	WRITE ( io, 503 )
[1]	399	ENDIF
	400	IF ( scalar_advec == 'pw-scheme' ) THEN
	401	WRITE ( io, 116 )
[667]	402	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	403	WRITE ( io, 504 )
[1]	404	ELSE
	405	WRITE ( io, 118 )
	406	ENDIF
[63]	407
	408	WRITE ( io, 139 ) TRIM( loop_optimization )
	409
[1]	410	IF ( galilei_transformation ) THEN
	411	IF ( use_ug_for_galilei_tr ) THEN
[868]	412	char1 = '0.6 * geostrophic wind'
[1]	413	ELSE
	414	char1 = 'mean wind in model domain'
	415	ENDIF
	416	IF ( simulated_time_at_begin == simulated_time ) THEN
	417	char2 = 'at the start of the run'
	418	ELSE
	419	char2 = 'at the end of the run'
	420	ENDIF
[1353]	421	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	422	advected_distance_x/1000.0_wp, &
	423	advected_distance_y/1000.0_wp
[1]	424	ENDIF
[1001]	425	WRITE ( io, 122 ) timestep_scheme
[87]	426	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1353]	427	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
[3294]	428	IF ( .NOT. ocean_mode ) THEN
[108]	429	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	430	rayleigh_damping_factor
	431	ELSE
	432	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	433	rayleigh_damping_factor
	434	ENDIF
[1]	435	ENDIF
[940]	436	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	437	IF ( humidity ) THEN
[3274]	438	IF ( .NOT. bulk_cloud_model ) THEN
[1]	439	WRITE ( io, 129 )
	440	ELSE
	441	WRITE ( io, 130 )
	442	ENDIF
	443	ENDIF
	444	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	445	IF ( conserve_volume_flow ) THEN
[241]	446	WRITE ( io, 150 ) conserve_volume_flow_mode
	447	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	448	WRITE ( io, 151 ) u_bulk, v_bulk
	449	ENDIF
[240]	450	ELSEIF ( dp_external ) THEN
	451	IF ( dp_smooth ) THEN
[241]	452	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	453	ELSE
[241]	454	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	455	ENDIF
	456	ENDIF
[1]	457	WRITE ( io, 99 )
	458
	459	!
[1551]	460	!-- Runtime and timestep information
[1]	461	WRITE ( io, 200 )
	462	IF ( .NOT. dt_fixed ) THEN
	463	WRITE ( io, 201 ) dt_max, cfl_factor
	464	ELSE
	465	WRITE ( io, 202 ) dt
	466	ENDIF
	467	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	468
[1322]	469	IF ( time_restart /= 9999999.9_wp .AND. &
[1]	470	simulated_time_at_begin == simulated_time ) THEN
[1322]	471	IF ( dt_restart == 9999999.9_wp ) THEN
[1]	472	WRITE ( io, 204 ) ' Restart at: ',time_restart
	473	ELSE
	474	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	475	ENDIF
	476	ENDIF
	477
	478	IF ( simulated_time_at_begin /= simulated_time ) THEN
	479	i = MAX ( log_point_s(10)%counts, 1 )
[1353]	480	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
	481	cpuseconds_per_simulated_second = 0.0_wp
[1]	482	ELSE
	483	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	484	( simulated_time - &
	485	simulated_time_at_begin )
	486	ENDIF
[1322]	487	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	488	log_point_s(10)%sum / REAL( i, KIND=wp ), &
[1]	489	cpuseconds_per_simulated_second
[1322]	490	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
	491	IF ( dt_restart == 9999999.9_wp ) THEN
[1106]	492	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	493	ELSE
[1106]	494	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	495	ENDIF
	496	ENDIF
	497	ENDIF
	498
[1324]	499
[1]	500	!
[291]	501	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	502	!-- and ocean are used or have been used. In this case, coupling_start_time
	503	!-- defines the time when the coupling is switched on.
[1353]	504	IF ( coupling_start_time /= 0.0_wp ) THEN
[1106]	505	WRITE ( io, 207 ) coupling_start_time
[291]	506	ENDIF
	507
	508	!
[1]	509	!-- Computational grid
[3294]	510	IF ( .NOT. ocean_mode ) THEN
[3065]	511	WRITE ( io, 250 ) dx, dy
[4586]	512
[3065]	513	DO i = 1, number_stretch_level_start+1
	514	WRITE ( io, 253 ) i, dz(i)
	515	ENDDO
[4586]	516
[3065]	517	WRITE( io, 251 ) (nx+1)dx, (ny+1)dy, zu(nzt+1)
[4586]	518
[3065]	519	IF ( ANY( dz_stretch_level_start_index < nzt+1 ) ) THEN
	520	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	521	DO i = 1, number_stretch_level_start
	522	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	523	ENDDO
	524	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	525	DO i = 1, number_stretch_level_start
	526	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	527	ENDDO
	528	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	529	DO i = 1, number_stretch_level_start
	530	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	531	ENDDO
	532	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	533	DO i = 1, number_stretch_level_start
	534	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	535	ENDDO
	536	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	537	DO i = 1, number_stretch_level_start
	538	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	539	ENDDO
[94]	540	ENDIF
[4586]	541
[94]	542	ELSE
[3065]	543	WRITE ( io, 250 ) dx, dy
	544	DO i = 1, number_stretch_level_start+1
	545	WRITE ( io, 253 ) i, dz(i)
	546	ENDDO
[4586]	547
[3065]	548	WRITE ( io, 251 ) (nx+1)dx, (ny+1)dy, zu(0)
[4586]	549
[3065]	550	IF ( ANY( dz_stretch_level_start_index > 0 ) ) THEN
	551	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	552	DO i = 1, number_stretch_level_start
	553	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	554	ENDDO
	555	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	556	DO i = 1, number_stretch_level_start
	557	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	558	ENDDO
	559	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	560	DO i = 1, number_stretch_level_start
	561	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	562	ENDDO
	563	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	564	DO i = 1, number_stretch_level_start
	565	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	566	ENDDO
	567	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	568	DO i = 1, number_stretch_level_start
	569	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	570	ENDDO
[94]	571	ENDIF
[1]	572	ENDIF
[3065]	573	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
[1]	574	MIN( nnz+2, nzt+2 )
	575	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	576
	577	!
[1365]	578	!-- Profile for the large scale vertial velocity
	579	!-- Building output strings, starting with surface value
	580	IF ( large_scale_subsidence ) THEN
	581	temperatures = ' 0.0'
	582	gradients = '------'
	583	slices = ' 0'
	584	coordinates = ' 0.0'
	585	i = 1
	586	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
	587
	588	WRITE (coor_chr,'(E10.2,7X)') &
	589	w_subs(subs_vertical_gradient_level_i(i))
	590	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	591
	592	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
	593	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	594
	595	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
	596	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	597
	598	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
	599	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	600
	601	IF ( i == 10 ) THEN
	602	EXIT
	603	ELSE
	604	i = i + 1
	605	ENDIF
	606
	607	ENDDO
	608
[4586]	609
[1365]	610	IF ( .NOT. large_scale_forcing ) THEN
	611	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	612	TRIM( gradients ), TRIM( slices )
	613	ENDIF
	614
	615
	616	ENDIF
	617
	618	!-- Profile of the geostrophic wind (component ug)
	619	!-- Building output strings
	620	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	621	gradients = '------'
	622	slices = ' 0'
	623	coordinates = ' 0.0'
	624	i = 1
	625	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
[4586]	626
[1365]	627	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
	628	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	629
	630	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
	631	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	632
	633	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
	634	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	635
	636	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
	637	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	638
	639	IF ( i == 10 ) THEN
	640	EXIT
	641	ELSE
	642	i = i + 1
	643	ENDIF
	644
	645	ENDDO
	646
	647	IF ( .NOT. large_scale_forcing ) THEN
	648	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	649	TRIM( gradients ), TRIM( slices )
	650	ENDIF
	651
	652	!-- Profile of the geostrophic wind (component vg)
	653	!-- Building output strings
	654	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	655	gradients = '------'
	656	slices = ' 0'
	657	coordinates = ' 0.0'
	658	i = 1
	659	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	660
	661	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
	662	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	663
	664	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
	665	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	666
	667	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
	668	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	669
	670	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
	671	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	672
	673	IF ( i == 10 ) THEN
	674	EXIT
	675	ELSE
	676	i = i + 1
	677	ENDIF
[4586]	678
[1365]	679	ENDDO
	680
	681	IF ( .NOT. large_scale_forcing ) THEN
	682	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	683	TRIM( gradients ), TRIM( slices )
	684	ENDIF
	685
	686	!
[1]	687	!-- Topography
	688	WRITE ( io, 270 ) topography
	689	SELECT CASE ( TRIM( topography ) )
	690
	691	CASE ( 'flat' )
	692	! no actions necessary
	693
	694	CASE ( 'single_building' )
	695	blx = INT( building_length_x / dx )
	696	bly = INT( building_length_y / dy )
[1675]	697	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
	698	IF ( ABS( zw(bh ) - building_height ) == &
	699	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
[1]	700
[1322]	701	IF ( building_wall_left == 9999999.9_wp ) THEN
[1]	702	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	703	ENDIF
[1353]	704	bxl = INT ( building_wall_left / dx + 0.5_wp )
[1]	705	bxr = bxl + blx
	706
[1322]	707	IF ( building_wall_south == 9999999.9_wp ) THEN
[1]	708	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	709	ENDIF
[1353]	710	bys = INT ( building_wall_south / dy + 0.5_wp )
[1]	711	byn = bys + bly
	712
	713	WRITE ( io, 271 ) building_length_x, building_length_y, &
	714	building_height, bxl, bxr, bys, byn
	715
[240]	716	CASE ( 'single_street_canyon' )
[1675]	717	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
	718	IF ( ABS( zw(ch ) - canyon_height ) == &
	719	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
[1322]	720	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[240]	721	!
	722	!-- Street canyon in y direction
	723	cwx = NINT( canyon_width_x / dx )
[1322]	724	IF ( canyon_wall_left == 9999999.9_wp ) THEN
[240]	725	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	726	ENDIF
	727	cxl = NINT( canyon_wall_left / dx )
	728	cxr = cxl + cwx
	729	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	730
[1322]	731	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[240]	732	!
	733	!-- Street canyon in x direction
	734	cwy = NINT( canyon_width_y / dy )
[1322]	735	IF ( canyon_wall_south == 9999999.9_wp ) THEN
[240]	736	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	737	ENDIF
	738	cys = NINT( canyon_wall_south / dy )
	739	cyn = cys + cwy
	740	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	741	ENDIF
	742
[2232]	743	CASE ( 'tunnel' )
	744	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
	745	!
	746	!-- Tunnel axis in y direction
	747	IF ( tunnel_length == 9999999.9_wp .OR. &
	748	tunnel_length >= ( nx + 1 ) * dx ) THEN
	749	WRITE ( io, 273 ) 'y', tunnel_height, tunnel_wall_depth, &
	750	tunnel_width_x
	751	ELSE
	752	WRITE ( io, 274 ) 'y', tunnel_height, tunnel_wall_depth, &
	753	tunnel_width_x, tunnel_length
	754	ENDIF
	755
	756	ELSEIF ( tunnel_width_y /= 9999999.9_wp ) THEN
	757	!
	758	!-- Tunnel axis in x direction
	759	IF ( tunnel_length == 9999999.9_wp .OR. &
	760	tunnel_length >= ( ny + 1 ) * dy ) THEN
	761	WRITE ( io, 273 ) 'x', tunnel_height, tunnel_wall_depth, &
	762	tunnel_width_y
	763	ELSE
	764	WRITE ( io, 274 ) 'x', tunnel_height, tunnel_wall_depth, &
	765	tunnel_width_y, tunnel_length
	766	ENDIF
	767	ENDIF
	768
[1]	769	END SELECT
	770
[256]	771	IF ( TRIM( topography ) /= 'flat' ) THEN
	772	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	773	IF ( TRIM( topography ) == 'single_building' .OR. &
	774	TRIM( topography ) == 'single_street_canyon' ) THEN
	775	WRITE ( io, 278 )
	776	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	777	WRITE ( io, 279 )
	778	ENDIF
	779	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	780	WRITE ( io, 278 )
	781	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	782	WRITE ( io, 279 )
	783	ENDIF
	784	ENDIF
	785
[2550]	786	!-- Complex terrain
	787	IF ( complex_terrain ) THEN
[4586]	788	WRITE( io, 280 )
[2550]	789	IF ( turbulent_inflow ) THEN
[4168]	790	WRITE( io, 281 ) zu(topo_top_ind(0,0,0))
[2550]	791	ENDIF
	792	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	793	WRITE( io, 282 )
	794	ENDIF
	795	ENDIF
[3302]	796	!
[1]	797	!-- Boundary conditions
	798	IF ( ibc_p_b == 0 ) THEN
[1826]	799	r_lower = 'p(0) = 0 \|'
[1]	800	ELSEIF ( ibc_p_b == 1 ) THEN
[1826]	801	r_lower = 'p(0) = p(1) \|'
[1]	802	ENDIF
	803	IF ( ibc_p_t == 0 ) THEN
[1826]	804	r_upper = 'p(nzt+1) = 0 \|'
[1]	805	ELSE
[1826]	806	r_upper = 'p(nzt+1) = p(nzt) \|'
[1]	807	ENDIF
	808
	809	IF ( ibc_uv_b == 0 ) THEN
[1826]	810	r_lower = TRIM( r_lower ) // ' uv(0) = -uv(1) \|'
[1]	811	ELSE
[1826]	812	r_lower = TRIM( r_lower ) // ' uv(0) = uv(1) \|'
[1]	813	ENDIF
[132]	814	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
[1826]	815	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = 0 \|'
[132]	816	ELSEIF ( ibc_uv_t == 0 ) THEN
[1826]	817	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
[1]	818	ELSE
[1826]	819	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = uv(nzt) \|'
[1]	820	ENDIF
	821
	822	IF ( ibc_pt_b == 0 ) THEN
[1551]	823	IF ( land_surface ) THEN
[1826]	824	r_lower = TRIM( r_lower ) // ' pt(0) = from soil model'
[1551]	825	ELSE
[1826]	826	r_lower = TRIM( r_lower ) // ' pt(0) = pt_surface'
[1551]	827	ENDIF
[102]	828	ELSEIF ( ibc_pt_b == 1 ) THEN
[1826]	829	r_lower = TRIM( r_lower ) // ' pt(0) = pt(1)'
[102]	830	ELSEIF ( ibc_pt_b == 2 ) THEN
[1826]	831	r_lower = TRIM( r_lower ) // ' pt(0) = from coupled model'
[1]	832	ENDIF
	833	IF ( ibc_pt_t == 0 ) THEN
[1826]	834	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt_top'
[19]	835	ELSEIF( ibc_pt_t == 1 ) THEN
[1826]	836	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt)'
[19]	837	ELSEIF( ibc_pt_t == 2 ) THEN
[1826]	838	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	839
[1]	840	ENDIF
	841
[1826]	842	WRITE ( io, 300 ) r_lower, r_upper
[1]	843
	844	IF ( .NOT. constant_diffusion ) THEN
	845	IF ( ibc_e_b == 1 ) THEN
[1826]	846	r_lower = 'e(0) = e(1)'
[1]	847	ELSE
[1826]	848	r_lower = 'e(0) = e(1) = (u/0.1)*2'
[1]	849	ENDIF
[1826]	850	r_upper = 'e(nzt+1) = e(nzt) = e(nzt-1)'
[1]	851
[4586]	852	WRITE ( io, 301 ) 'e', r_lower, r_upper
[1]	853
	854	ENDIF
	855
[3294]	856	IF ( ocean_mode ) THEN
[1826]	857	r_lower = 'sa(0) = sa(1)'
[97]	858	IF ( ibc_sa_t == 0 ) THEN
[1826]	859	r_upper = 'sa(nzt+1) = sa_surface'
[1]	860	ELSE
[1826]	861	r_upper = 'sa(nzt+1) = sa(nzt)'
[1]	862	ENDIF
[1826]	863	WRITE ( io, 301 ) 'sa', r_lower, r_upper
[97]	864	ENDIF
[1]	865
[97]	866	IF ( humidity ) THEN
	867	IF ( ibc_q_b == 0 ) THEN
[1551]	868	IF ( land_surface ) THEN
[1826]	869	r_lower = 'q(0) = from soil model'
[1551]	870	ELSE
[1826]	871	r_lower = 'q(0) = q_surface'
[1551]	872	ENDIF
	873
[97]	874	ELSE
[1992]	875	r_lower = 'q(0) = q(1)'
[97]	876	ENDIF
	877	IF ( ibc_q_t == 0 ) THEN
[1992]	878	r_upper = 'q(nzt+1) = q_top'
[97]	879	ELSE
[1992]	880	r_upper = 'q(nzt+1) = q(nzt) + dq/dz'
[97]	881	ENDIF
[1826]	882	WRITE ( io, 301 ) 'q', r_lower, r_upper
[97]	883	ENDIF
[1]	884
[97]	885	IF ( passive_scalar ) THEN
[1960]	886	IF ( ibc_s_b == 0 ) THEN
[1992]	887	r_lower = 's(0) = s_surface'
[97]	888	ELSE
[1992]	889	r_lower = 's(0) = s(1)'
[97]	890	ENDIF
[1960]	891	IF ( ibc_s_t == 0 ) THEN
[1992]	892	r_upper = 's(nzt+1) = s_top'
	893	ELSEIF ( ibc_s_t == 1 ) THEN
	894	r_upper = 's(nzt+1) = s(nzt)'
	895	ELSEIF ( ibc_s_t == 2 ) THEN
	896	r_upper = 's(nzt+1) = s(nzt) + ds/dz'
[97]	897	ENDIF
[1826]	898	WRITE ( io, 301 ) 's', r_lower, r_upper
[1]	899	ENDIF
	900
	901	IF ( use_surface_fluxes ) THEN
	902	WRITE ( io, 303 )
	903	IF ( constant_heatflux ) THEN
[1299]	904	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	905	IF ( surf_def_h(0)%ns >= 1 ) WRITE ( io, 306 ) surf_def_h(0)%shf(1)
[1241]	906	ELSE
	907	WRITE ( io, 306 ) surface_heatflux
	908	ENDIF
[1]	909	IF ( random_heatflux ) WRITE ( io, 307 )
	910	ENDIF
[75]	911	IF ( humidity .AND. constant_waterflux ) THEN
[1299]	912	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	913	WRITE ( io, 311 ) surf_def_h(0)%qsws(1)
[1241]	914	ELSE
	915	WRITE ( io, 311 ) surface_waterflux
	916	ENDIF
[1]	917	ENDIF
[1960]	918	IF ( passive_scalar .AND. constant_scalarflux ) THEN
	919	WRITE ( io, 313 ) surface_scalarflux
[1]	920	ENDIF
	921	ENDIF
	922
[19]	923	IF ( use_top_fluxes ) THEN
	924	WRITE ( io, 304 )
[102]	925	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	926	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	927	IF ( constant_top_heatflux ) THEN
	928	WRITE ( io, 306 ) top_heatflux
	929	ENDIF
	930	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	931	WRITE ( io, 316 )
[19]	932	ENDIF
[3294]	933	IF ( ocean_mode .AND. constant_top_salinityflux ) &
[97]	934	WRITE ( io, 309 ) top_salinityflux
[1960]	935	IF ( humidity ) WRITE ( io, 315 )
[1992]	936	IF ( passive_scalar .AND. constant_top_scalarflux ) &
	937	WRITE ( io, 302 ) top_scalarflux
[19]	938	ENDIF
	939
[1691]	940	IF ( constant_flux_layer ) THEN
	941	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	942	z0h_factor*roughness_length, kappa, &
	943	zeta_min, zeta_max
[1]	944	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	945	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	946	WRITE ( io, 312 )
	947	ENDIF
[1960]	948	IF ( passive_scalar .AND. .NOT. constant_scalarflux ) THEN
[1]	949	WRITE ( io, 314 )
	950	ENDIF
	951	ELSE
	952	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
[1691]	953	WRITE ( io, 310 ) zeta_min, zeta_max
[1]	954	ENDIF
	955	ENDIF
	956
	957	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	958	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[4586]	959	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
[151]	960	IF ( turbulent_inflow ) THEN
[4301]	961	IF ( y_shift == 0 ) THEN
[1560]	962	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	963	inflow_damping_height, inflow_damping_width
	964	ELSE
[4301]	965	WRITE ( io, 322 ) y_shift, recycling_width, recycling_plane, &
[1560]	966	inflow_damping_height, inflow_damping_width
	967	END IF
[151]	968	ENDIF
[2050]	969	IF ( turbulent_outflow ) THEN
	970	WRITE ( io, 323 ) outflow_source_plane, INT(outflow_source_plane/dx)
	971	ENDIF
[1]	972	ENDIF
	973
	974	!
[1365]	975	!-- Initial Profiles
	976	WRITE ( io, 321 )
	977	!
	978	!-- Initial wind profiles
	979	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
	980
	981	!
	982	!-- Initial temperature profile
	983	!-- Building output strings, starting with surface temperature
	984	WRITE ( temperatures, '(F6.2)' ) pt_surface
	985	gradients = '------'
	986	slices = ' 0'
	987	coordinates = ' 0.0'
	988	i = 1
	989	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	990
	991	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	992	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	993
	994	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	995	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	996
	997	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	998	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	999
	1000	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1001	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1002
	1003	IF ( i == 10 ) THEN
	1004	EXIT
	1005	ELSE
	1006	i = i + 1
	1007	ENDIF
	1008
	1009	ENDDO
	1010
	1011	IF ( .NOT. nudging ) THEN
	1012	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1013	TRIM( gradients ), TRIM( slices )
	1014	ELSE
[4586]	1015	WRITE ( io, 428 )
[1365]	1016	ENDIF
	1017
	1018	!
	1019	!-- Initial humidity profile
	1020	!-- Building output strings, starting with surface humidity
[1960]	1021	IF ( humidity ) THEN
[1365]	1022	WRITE ( temperatures, '(E8.1)' ) q_surface
	1023	gradients = '--------'
	1024	slices = ' 0'
	1025	coordinates = ' 0.0'
	1026	i = 1
	1027	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
[4586]	1028
[1365]	1029	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1030	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1031
	1032	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1033	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[4586]	1034
[1365]	1035	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1036	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[4586]	1037
[1365]	1038	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1039	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1040
	1041	IF ( i == 10 ) THEN
	1042	EXIT
	1043	ELSE
	1044	i = i + 1
	1045	ENDIF
	1046
	1047	ENDDO
	1048
[1960]	1049	IF ( .NOT. nudging ) THEN
	1050	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
[1365]	1051	TRIM( gradients ), TRIM( slices )
	1052	ENDIF
	1053	ENDIF
[1960]	1054	!
	1055	!-- Initial scalar profile
	1056	!-- Building output strings, starting with surface humidity
	1057	IF ( passive_scalar ) THEN
	1058	WRITE ( temperatures, '(E8.1)' ) s_surface
	1059	gradients = '--------'
	1060	slices = ' 0'
	1061	coordinates = ' 0.0'
	1062	i = 1
	1063	DO WHILE ( s_vertical_gradient_level_ind(i) /= -9999 )
[4586]	1064
[2073]	1065	WRITE (coor_chr,'(E8.1,4X)') s_init(s_vertical_gradient_level_ind(i))
[1960]	1066	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1365]	1067
[1960]	1068	WRITE (coor_chr,'(E8.1,4X)') s_vertical_gradient(i)
	1069	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[4586]	1070
[1960]	1071	WRITE (coor_chr,'(I8,4X)') s_vertical_gradient_level_ind(i)
	1072	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[4586]	1073
[1960]	1074	WRITE (coor_chr,'(F8.1,4X)') s_vertical_gradient_level(i)
	1075	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1076
	1077	IF ( i == 10 ) THEN
	1078	EXIT
	1079	ELSE
	1080	i = i + 1
	1081	ENDIF
	1082
	1083	ENDDO
	1084
	1085	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1086	TRIM( gradients ), TRIM( slices )
[4586]	1087	ENDIF
[1960]	1088
[1365]	1089	!
	1090	!-- Initial salinity profile
	1091	!-- Building output strings, starting with surface salinity
[3294]	1092	IF ( ocean_mode ) THEN
[1365]	1093	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1094	gradients = '------'
	1095	slices = ' 0'
	1096	coordinates = ' 0.0'
	1097	i = 1
	1098	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1099
	1100	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1101	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1102
	1103	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1104	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1105
	1106	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1107	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1108
	1109	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1110	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1111
	1112	IF ( i == 10 ) THEN
	1113	EXIT
	1114	ELSE
	1115	i = i + 1
	1116	ENDIF
	1117
	1118	ENDDO
	1119
	1120	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1121	TRIM( gradients ), TRIM( slices )
	1122	ENDIF
	1123
	1124
	1125	!
[1]	1126	!-- Listing of 1D-profiles
[151]	1127	WRITE ( io, 325 ) dt_dopr_listing
[1353]	1128	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1129	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1130	ENDIF
	1131
	1132	!
	1133	!-- DATA output
	1134	WRITE ( io, 330 )
[1353]	1135	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1136	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1137	ENDIF
	1138
	1139	!
	1140	!-- 1D-profiles
[346]	1141	dopr_chr = 'Profile:'
[1]	1142	IF ( dopr_n /= 0 ) THEN
	1143	WRITE ( io, 331 )
	1144
	1145	output_format = ''
[1783]	1146	output_format = netcdf_data_format_string
	1147	IF ( netcdf_deflate == 0 ) THEN
	1148	WRITE ( io, 344 ) output_format
	1149	ELSE
	1150	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1151	ENDIF
[1]	1152
	1153	DO i = 1, dopr_n
	1154	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	1155	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	1156	WRITE ( io, 332 ) dopr_chr
	1157	dopr_chr = ' :'
	1158	ENDIF
	1159	ENDDO
	1160
	1161	IF ( dopr_chr /= '' ) THEN
	1162	WRITE ( io, 332 ) dopr_chr
	1163	ENDIF
	1164	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
[1353]	1165	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
[1]	1166	ENDIF
	1167
	1168	!
	1169	!-- 2D-arrays
	1170	DO av = 0, 1
	1171
	1172	i = 1
	1173	do2d_xy = ''
	1174	do2d_xz = ''
	1175	do2d_yz = ''
	1176	DO WHILE ( do2d(av,i) /= ' ' )
	1177
	1178	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	1179	do2d_mode = do2d(av,i)(l-1:l)
	1180
	1181	SELECT CASE ( do2d_mode )
	1182	CASE ( 'xy' )
	1183	ll = LEN_TRIM( do2d_xy )
	1184	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1185	CASE ( 'xz' )
	1186	ll = LEN_TRIM( do2d_xz )
	1187	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1188	CASE ( 'yz' )
	1189	ll = LEN_TRIM( do2d_yz )
	1190	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1191	END SELECT
	1192
	1193	i = i + 1
	1194
	1195	ENDDO
	1196
	1197	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	1198	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
[1327]	1199	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
[1]	1200
	1201	IF ( av == 0 ) THEN
	1202	WRITE ( io, 334 ) ''
	1203	ELSE
	1204	WRITE ( io, 334 ) '(time-averaged)'
	1205	ENDIF
	1206
	1207	IF ( do2d_at_begin ) THEN
	1208	begin_chr = 'and at the start'
	1209	ELSE
	1210	begin_chr = ''
	1211	ENDIF
	1212
	1213	output_format = ''
[1783]	1214	output_format = netcdf_data_format_string
	1215	IF ( netcdf_deflate == 0 ) THEN
	1216	WRITE ( io, 344 ) output_format
	1217	ELSE
	1218	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1219	ENDIF
[1]	1220
	1221	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	1222	i = 1
	1223	slices = '/'
	1224	coordinates = '/'
	1225	!
[1551]	1226	!-- Building strings with index and coordinate information of the
[1]	1227	!-- slices
	1228	DO WHILE ( section(i,1) /= -9999 )
	1229
	1230	WRITE (section_chr,'(I5)') section(i,1)
	1231	section_chr = ADJUSTL( section_chr )
	1232	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1233
[206]	1234	IF ( section(i,1) == -1 ) THEN
[1353]	1235	WRITE (coor_chr,'(F10.1)') -1.0_wp
[206]	1236	ELSE
	1237	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	1238	ENDIF
[1]	1239	coor_chr = ADJUSTL( coor_chr )
	1240	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1241
	1242	i = i + 1
	1243	ENDDO
	1244	IF ( av == 0 ) THEN
	1245	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	1246	TRIM( begin_chr ), 'k', TRIM( slices ), &
	1247	TRIM( coordinates )
[1353]	1248	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
[1]	1249	WRITE ( io, 339 ) skip_time_do2d_xy
	1250	ENDIF
	1251	ELSE
	1252	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	1253	TRIM( begin_chr ), averaging_interval, &
	1254	dt_averaging_input, 'k', TRIM( slices ), &
	1255	TRIM( coordinates )
[1353]	1256	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1257	WRITE ( io, 339 ) skip_time_data_output_av
	1258	ENDIF
	1259	ENDIF
[1308]	1260	IF ( netcdf_data_format > 4 ) THEN
	1261	WRITE ( io, 352 ) ntdim_2d_xy(av)
	1262	ELSE
	1263	WRITE ( io, 353 )
	1264	ENDIF
[1]	1265	ENDIF
	1266
	1267	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	1268	i = 1
	1269	slices = '/'
	1270	coordinates = '/'
	1271	!
[1551]	1272	!-- Building strings with index and coordinate information of the
[1]	1273	!-- slices
	1274	DO WHILE ( section(i,2) /= -9999 )
	1275
	1276	WRITE (section_chr,'(I5)') section(i,2)
	1277	section_chr = ADJUSTL( section_chr )
	1278	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1279
	1280	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	1281	coor_chr = ADJUSTL( coor_chr )
	1282	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1283
	1284	i = i + 1
	1285	ENDDO
	1286	IF ( av == 0 ) THEN
	1287	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	1288	TRIM( begin_chr ), 'j', TRIM( slices ), &
	1289	TRIM( coordinates )
[1353]	1290	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
[1]	1291	WRITE ( io, 339 ) skip_time_do2d_xz
	1292	ENDIF
	1293	ELSE
	1294	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	1295	TRIM( begin_chr ), averaging_interval, &
	1296	dt_averaging_input, 'j', TRIM( slices ), &
	1297	TRIM( coordinates )
[1353]	1298	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1299	WRITE ( io, 339 ) skip_time_data_output_av
	1300	ENDIF
	1301	ENDIF
[1308]	1302	IF ( netcdf_data_format > 4 ) THEN
	1303	WRITE ( io, 352 ) ntdim_2d_xz(av)
	1304	ELSE
	1305	WRITE ( io, 353 )
	1306	ENDIF
[1]	1307	ENDIF
	1308
	1309	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	1310	i = 1
	1311	slices = '/'
	1312	coordinates = '/'
	1313	!
[1551]	1314	!-- Building strings with index and coordinate information of the
[1]	1315	!-- slices
	1316	DO WHILE ( section(i,3) /= -9999 )
	1317
	1318	WRITE (section_chr,'(I5)') section(i,3)
	1319	section_chr = ADJUSTL( section_chr )
	1320	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1321
	1322	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	1323	coor_chr = ADJUSTL( coor_chr )
	1324	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1325
	1326	i = i + 1
	1327	ENDDO
	1328	IF ( av == 0 ) THEN
	1329	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	1330	TRIM( begin_chr ), 'i', TRIM( slices ), &
	1331	TRIM( coordinates )
[1353]	1332	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
[1]	1333	WRITE ( io, 339 ) skip_time_do2d_yz
	1334	ENDIF
	1335	ELSE
	1336	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	1337	TRIM( begin_chr ), averaging_interval, &
	1338	dt_averaging_input, 'i', TRIM( slices ), &
	1339	TRIM( coordinates )
[1353]	1340	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1341	WRITE ( io, 339 ) skip_time_data_output_av
	1342	ENDIF
	1343	ENDIF
[1308]	1344	IF ( netcdf_data_format > 4 ) THEN
	1345	WRITE ( io, 352 ) ntdim_2d_yz(av)
	1346	ELSE
	1347	WRITE ( io, 353 )
	1348	ENDIF
[1]	1349	ENDIF
	1350
	1351	ENDIF
	1352
	1353	ENDDO
	1354
	1355	!
	1356	!-- 3d-arrays
	1357	DO av = 0, 1
	1358
	1359	i = 1
	1360	do3d_chr = ''
	1361	DO WHILE ( do3d(av,i) /= ' ' )
	1362
	1363	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	1364	i = i + 1
	1365
	1366	ENDDO
	1367
	1368	IF ( do3d_chr /= '' ) THEN
	1369	IF ( av == 0 ) THEN
	1370	WRITE ( io, 336 ) ''
	1371	ELSE
	1372	WRITE ( io, 336 ) '(time-averaged)'
	1373	ENDIF
	1374
[1783]	1375	output_format = netcdf_data_format_string
	1376	IF ( netcdf_deflate == 0 ) THEN
	1377	WRITE ( io, 344 ) output_format
	1378	ELSE
	1379	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1380	ENDIF
[1]	1381
	1382	IF ( do3d_at_begin ) THEN
	1383	begin_chr = 'and at the start'
	1384	ELSE
	1385	begin_chr = ''
	1386	ENDIF
	1387	IF ( av == 0 ) THEN
	1388	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1389	zu(nz_do3d), nz_do3d
	1390	ELSE
	1391	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1392	TRIM( begin_chr ), averaging_interval, &
	1393	dt_averaging_input, zu(nz_do3d), nz_do3d
	1394	ENDIF
	1395
[1308]	1396	IF ( netcdf_data_format > 4 ) THEN
	1397	WRITE ( io, 352 ) ntdim_3d(av)
	1398	ELSE
	1399	WRITE ( io, 353 )
	1400	ENDIF
	1401
[1]	1402	IF ( av == 0 ) THEN
[1353]	1403	IF ( skip_time_do3d /= 0.0_wp ) THEN
[1]	1404	WRITE ( io, 339 ) skip_time_do3d
	1405	ENDIF
	1406	ELSE
[1353]	1407	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1408	WRITE ( io, 339 ) skip_time_data_output_av
	1409	ENDIF
	1410	ENDIF
	1411
	1412	ENDIF
	1413
	1414	ENDDO
	1415
	1416	!
[410]	1417	!-- masked arrays
	1418	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1419	mask_scale_x, mask_scale_y, mask_scale_z
	1420	DO mid = 1, masks
	1421	DO av = 0, 1
	1422
	1423	i = 1
	1424	domask_chr = ''
	1425	DO WHILE ( domask(mid,av,i) /= ' ' )
	1426	domask_chr = TRIM( domask_chr ) // ' ' // &
	1427	TRIM( domask(mid,av,i) ) // ','
	1428	i = i + 1
	1429	ENDDO
	1430
	1431	IF ( domask_chr /= '' ) THEN
	1432	IF ( av == 0 ) THEN
	1433	WRITE ( io, 346 ) '', mid
	1434	ELSE
	1435	WRITE ( io, 346 ) ' (time-averaged)', mid
	1436	ENDIF
	1437
[1783]	1438	output_format = netcdf_data_format_string
[1308]	1439	!-- Parallel output not implemented for mask data, hence
	1440	!-- output_format must be adjusted.
	1441	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
	1442	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
[1783]	1443	IF ( netcdf_deflate == 0 ) THEN
	1444	WRITE ( io, 344 ) output_format
	1445	ELSE
	1446	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1447	ENDIF
[410]	1448
	1449	IF ( av == 0 ) THEN
	1450	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1451	ELSE
	1452	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1453	averaging_interval, dt_averaging_input
	1454	ENDIF
	1455
	1456	IF ( av == 0 ) THEN
[1353]	1457	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
[410]	1458	WRITE ( io, 339 ) skip_time_domask(mid)
	1459	ENDIF
	1460	ELSE
[1353]	1461	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[410]	1462	WRITE ( io, 339 ) skip_time_data_output_av
	1463	ENDIF
	1464	ENDIF
	1465	!
	1466	!-- output locations
	1467	DO dim = 1, 3
[1353]	1468	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
[410]	1469	count = 0
[1353]	1470	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
[410]	1471	count = count + 1
	1472	ENDDO
	1473	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1474	mask(mid,dim,:count)
[1353]	1475	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
	1476	mask_loop(mid,dim,2) < 0.0_wp .AND. &
	1477	mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1478	WRITE ( io, 350 ) dir(dim), dir(dim)
[1353]	1479	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1480	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1481	mask_loop(mid,dim,1:2)
	1482	ELSE
	1483	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1484	mask_loop(mid,dim,1:3)
	1485	ENDIF
	1486	ENDDO
	1487	ENDIF
	1488
	1489	ENDDO
	1490	ENDDO
	1491
	1492	!
[1]	1493	!-- Timeseries
[1322]	1494	IF ( dt_dots /= 9999999.9_wp ) THEN
[1]	1495	WRITE ( io, 340 )
	1496
[1783]	1497	output_format = netcdf_data_format_string
	1498	IF ( netcdf_deflate == 0 ) THEN
	1499	WRITE ( io, 344 ) output_format
	1500	ELSE
	1501	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1502	ENDIF
[1]	1503	WRITE ( io, 341 ) dt_dots
	1504	ENDIF
	1505
[4536]	1506	!
	1507	!-- Restart data formats
	1508	IF ( TRIM( initializing_actions ) == 'read_restart_data' .OR. write_binary ) THEN
	1509	WRITE ( io, 355 )
	1510	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	1511	WRITE ( io, 356 ) TRIM( restart_data_format_input )
	1512	ENDIF
	1513	IF ( write_binary ) THEN
	1514	WRITE ( io, 357 ) TRIM( restart_data_format_output )
	1515	ENDIF
	1516	ENDIF
	1517
[1]	1518	WRITE ( io, 99 )
	1519
	1520	!
	1521	!-- Physical quantities
	1522	WRITE ( io, 400 )
	1523
	1524	!
	1525	!-- Geostrophic parameters
[4196]	1526	WRITE ( io, 410 ) latitude, longitude, rotation_angle, omega, f, fs
[1]	1527
[3241]	1528	!
[4227]	1529	!-- Day and time during model start
	1530	CALL get_date_time( 0.0_wp, date_time_str=date_time_str )
	1531	WRITE ( io, 456 ) TRIM( date_time_str )
	1532
[1]	1533	!
	1534	!-- Other quantities
	1535	WRITE ( io, 411 ) g
[1551]	1536
[1179]	1537	WRITE ( io, 412 ) TRIM( reference_state )
	1538	IF ( use_single_reference_value ) THEN
[3294]	1539	IF ( ocean_mode ) THEN
[1179]	1540	WRITE ( io, 413 ) prho_reference
[97]	1541	ELSE
[1179]	1542	WRITE ( io, 414 ) pt_reference
[97]	1543	ENDIF
	1544	ENDIF
[1]	1545
	1546	!
[824]	1547	!-- Cloud physcis parameters / quantities / numerical methods
	1548	WRITE ( io, 430 )
[3274]	1549	IF ( humidity .AND. .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets) THEN
[824]	1550	WRITE ( io, 431 )
[3274]	1551	ENDIF
[824]	1552	!
[1]	1553	!-- LES / turbulence parameters
	1554	WRITE ( io, 450 )
	1555
	1556	!--
	1557	! ... LES-constants used must still be added here
	1558	!--
	1559	IF ( constant_diffusion ) THEN
	1560	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1561	prandtl_number
	1562	ENDIF
	1563	IF ( .NOT. constant_diffusion) THEN
[1353]	1564	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
	1565	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
[4473]	1566	IF ( wall_adjustment ) WRITE ( io, 453 )
[1]	1567	ENDIF
[3083]	1568	IF ( rans_mode ) THEN
	1569	WRITE ( io, 457 ) rans_const_c, rans_const_sigma
	1570	ENDIF
[1]	1571	!
	1572	!-- Special actions during the run
	1573	WRITE ( io, 470 )
	1574	IF ( create_disturbances ) THEN
	1575	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1576	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1577	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1578	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1579	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1580	ELSE
	1581	WRITE ( io, 473 ) disturbance_energy_limit
	1582	ENDIF
	1583	WRITE ( io, 474 ) TRIM( random_generator )
	1584	ENDIF
[1353]	1585	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
[1]	1586	WRITE ( io, 475 ) pt_surface_initial_change
	1587	ENDIF
[4573]	1588	IF ( pt_surface_heating_rate /= 0.0_wp ) THEN
	1589	WRITE ( io, 476 ) pt_surface_heating_rate
	1590	ENDIF
[1353]	1591	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
[4586]	1592	WRITE ( io, 477 ) q_surface_initial_change
[1]	1593	ENDIF
[1353]	1594	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
[4586]	1595	WRITE ( io, 478 ) q_surface_initial_change
[1]	1596	ENDIF
	1597
	1598	!
	1599	!-- Parameters of 1D-model
	1600	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1601	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1602	mixing_length_1d, dissipation_1d
	1603	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1604	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1605	ENDIF
	1606	ENDIF
	1607
	1608	!
[3637]	1609	!-- Header information from other modules
	1610	CALL module_interface_header( io )
[1]	1611
[3637]	1612
[1]	1613	WRITE ( io, 99 )
	1614
	1615	!
	1616	!-- Write buffer contents to disc immediately
[1808]	1617	FLUSH( io )
[1]	1618
	1619	!
	1620	!-- Here the FORMATs start
	1621
	1622	99 FORMAT (1X,78('-'))
[1468]	1623	100 FORMAT (/1X,'******************************',4X,44('-')/ &
	1624	1X,'* ',A,' *',4X,A/ &
	1625	1X,'******************************',4X,44('-'))
[2298]	1626	101 FORMAT (35X,'coupled run: ',A/ &
[1468]	1627	35X,42('-'))
[3529]	1628	102 FORMAT (/' Date: ',A10,4X,'Run: ',A34/ &
[1468]	1629	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
[1106]	1630	' Run on host: ',A10)
[1]	1631	#if defined( __parallel )
[1468]	1632	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
[1]	1633	')',1X,A)
[1468]	1634	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
	1635	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
	1636	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
	1637	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
	1638	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
	1639	35X,42('-'))
	1640	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
	1641	35X,'independent precursor runs'/ &
	1642	35X,42('-'))
[1]	1643	#endif
	1644	110 FORMAT (/' Numerical Schemes:'/ &
	1645	' -----------------'/)
[2696]	1646	124 FORMAT (' --> Use the ',A,' turbulence closure (',A,' mode).')
[2037]	1647	121 FORMAT (' --> Use the ',A,' approximation for the model equations.')
[1]	1648	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1649	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
[1697]	1650	' Iterations (initial/other): ',I3,'/',I3,' omega =',F6.3)
[1]	1651	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1652	' or Upstream')
[1216]	1653	115 FORMAT (' FFT and transpositions are overlapping')
[1]	1654	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1655	' or Upstream')
	1656	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1657	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1658	' translation velocity = ',A/ &
[1]	1659	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1660	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1661	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1697]	1662	' maximum damping coefficient:',F6.3, ' 1/s')
[1]	1663	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1664	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1665	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1666	F6.2, ' K assumed')
[1]	1667	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
[1575]	1668	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
[1]	1669	A,'-cycle)'/ &
	1670	' number of grid levels: ',I2/ &
	1671	' Gauss-Seidel red/black iterations: ',I2)
	1672	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1673	I3,')')
	1674	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1675	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1676	I3,')'/ &
	1677	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1678	I3,')')
[63]	1679	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1680	140 FORMAT (' maximum residual allowed: ',E10.3)
	1681	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1682	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1683	'step')
[87]	1684	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1685	'kinetic energy')
[927]	1686	144 FORMAT (' masking method is used')
[1]	1687	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1688	'conserved'/ &
	1689	' using the ',A,' mode')
	1690	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1691	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1692	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1693	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1694	200 FORMAT (//' Run time and time step information:'/ &
	1695	' ----------------------------------'/)
[1106]	1696	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1697]	1697	' CFL-factor:',F5.2)
[1106]	1698	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
[4300]	1699	203 FORMAT ( ' Start time: ',F11.3,' s'/ &
	1700	' End time: ',F11.3,' s')
	1701	204 FORMAT ( A,F11.3,' s')
	1702	205 FORMAT ( A,F11.3,' s',5X,'restart every',17X,F11.3,' s')
	1703	206 FORMAT (/' Time reached: ',F11.3,' s'/ &
	1704	' CPU-time used: ',F9.3,' s per timestep: ',F9.3,' s'/ &
	1705	' per second of simulated time: ',F9.3,' s')
	1706	207 FORMAT ( ' Spinup time: ',F11.3,' s')
[1]	1707	250 FORMAT (//' Computational grid and domain size:'/ &
	1708	' ----------------------------------'// &
[3065]	1709	' Grid length: dx = ',F8.3,' m dy = ',F8.3, ' m')
	1710	251 FORMAT ( /' Domain size: x = ',F10.3,' m y = ',F10.3, &
[1]	1711	' m z(u) = ',F10.3,' m'/)
[3065]	1712	253 FORMAT ( ' dz(',I1,') = ', F8.3, ' m')
	1713	254 FORMAT (//' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
[1]	1714	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1715	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1716	' degrees')
[1551]	1717	270 FORMAT (//' Topography information:'/ &
	1718	' ----------------------'// &
[1]	1719	1X,'Topography: ',A)
	1720	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1721	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1722	' / ',I4)
[240]	1723	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1724	' direction' / &
	1725	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1726	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[2232]	1727	273 FORMAT ( ' Tunnel of infinite length in ',A, &
	1728	' direction' / &
	1729	' Tunnel height: ', F6.2, / &
	1730	' Tunnel-wall depth: ', F6.2 / &
	1731	' Tunnel width: ', F6.2 )
	1732	274 FORMAT ( ' Tunnel in ', A, ' direction.' / &
[4586]	1733	' Tunnel height: ', F6.2, / &
[2232]	1734	' Tunnel-wall depth: ', F6.2 / &
	1735	' Tunnel width: ', F6.2, / &
	1736	' Tunnel length: ', F6.2 )
[256]	1737	278 FORMAT (' Topography grid definition convention:'/ &
	1738	' cell edge (staggered grid points'/ &
	1739	' (u in x-direction, v in y-direction))' /)
	1740	279 FORMAT (' Topography grid definition convention:'/ &
	1741	' cell center (scalar grid points)' /)
[2550]	1742	280 FORMAT (' Complex terrain simulation is activated.')
	1743	281 FORMAT (' --> Mean inflow profiles are adjusted.' / &
	1744	' --> Elevation of inflow boundary: ', F7.1, ' m' )
	1745	282 FORMAT (' --> Initial data from 3D-precursor run is shifted' / &
	1746	' vertically depending on local surface height.')
[1]	1747	300 FORMAT (//' Boundary conditions:'/ &
	1748	' -------------------'// &
	1749	' p uv ', &
[1551]	1750	' pt'// &
[1]	1751	' B. bound.: ',A/ &
	1752	' T. bound.: ',A)
[97]	1753	301 FORMAT (/' ',A// &
[1]	1754	' B. bound.: ',A/ &
	1755	' T. bound.: ',A)
[19]	1756	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1757	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
[2270]	1758	305 FORMAT (//' Constant flux layer between bottom surface and first ', &
	1759	'computational u,v-level:'// &
	1760	' z_mo = ',F6.2,' m z0 =',F7.4,' m z0h =',F8.5,&
[1697]	1761	' m kappa =',F5.2/ &
[4586]	1762	' zeta value range: ',F8.2,' <= zeta <=',F6.2)
[97]	1763	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1764	307 FORMAT (' Heatflux has a random normal distribution')
	1765	308 FORMAT (' Predefined surface temperature')
[97]	1766	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1767	310 FORMAT (//' 1D-Model:'// &
[4586]	1768	' Ri value range: ',F6.2,' <= Ri <=',F6.2)
[1960]	1769	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' kg/kg m/s')
[1]	1770	312 FORMAT (' Predefined surface humidity')
	1771	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1772	314 FORMAT (' Predefined scalar value at the surface')
[1992]	1773	302 FORMAT (' Predefined constant scalarflux: ',F9.6,' kg/(m**2 s)')
	1774	315 FORMAT (' Humidity flux at top surface is 0.0')
[102]	1775	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1776	'atmosphere model')
[1]	1777	317 FORMAT (//' Lateral boundaries:'/ &
	1778	' left/right: ',A/ &
	1779	' north/south: ',A)
[1159]	1780	318 FORMAT (/' use_cmax: ',L1 / &
	1781	' pt damping layer width = ',F8.2,' m, pt ', &
[1697]	1782	'damping factor =',F7.4)
[151]	1783	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1784	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1785	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1786	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1787	' v: ',F9.6,' m2/s2')
[1365]	1788	321 FORMAT (//' Initial profiles:'/ &
	1789	' ----------------')
[1560]	1790	322 FORMAT (' turbulence recycling at inflow switched on'/ &
[4301]	1791	' y-shift of the recycled inflow turbulence is',I3,' PE'/ &
[1560]	1792	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
[1592]	1793	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/)
[2050]	1794	323 FORMAT (' turbulent outflow conditon switched on'/ &
	1795	' position of outflow source plane: ',F7.1,' m ', &
	1796	'grid index: ', I4)
[151]	1797	325 FORMAT (//' List output:'/ &
[1]	1798	' -----------'// &
	1799	' 1D-Profiles:'/ &
[2883]	1800	' Output every ',F10.2,' s')
[151]	1801	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1802	' Averaging input every ',F8.2,' s')
	1803	330 FORMAT (//' Data output:'/ &
	1804	' -----------'/)
	1805	331 FORMAT (/' 1D-Profiles:')
	1806	332 FORMAT (/' ',A)
	1807	333 FORMAT (' Output every ',F8.2,' s',/ &
	1808	' Time averaged over ',F8.2,' s'/ &
	1809	' Averaging input every ',F8.2,' s')
	1810	334 FORMAT (/' 2D-Arrays',A,':')
	1811	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1812	' Output every ',F8.2,' s ',A/ &
	1813	' Cross sections at ',A1,' = ',A/ &
	1814	' scalar-coordinates: ',A,' m'/)
	1815	336 FORMAT (/' 3D-Arrays',A,':')
	1816	337 FORMAT (/' Arrays: ',A/ &
	1817	' Output every ',F8.2,' s ',A/ &
	1818	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1819	339 FORMAT (' No output during initial ',F8.2,' s')
	1820	340 FORMAT (/' Time series:')
	1821	341 FORMAT (' Output every ',F8.2,' s'/)
	1822	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1823	' Output every ',F8.2,' s ',A/ &
	1824	' Time averaged over ',F8.2,' s'/ &
	1825	' Averaging input every ',F8.2,' s'/ &
	1826	' Cross sections at ',A1,' = ',A/ &
	1827	' scalar-coordinates: ',A,' m'/)
	1828	343 FORMAT (/' Arrays: ',A/ &
	1829	' Output every ',F8.2,' s ',A/ &
	1830	' Time averaged over ',F8.2,' s'/ &
	1831	' Averaging input every ',F8.2,' s'/ &
	1832	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1833	344 FORMAT (' Output format: ',A/)
[410]	1834	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1835	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1836	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1837	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1838	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1839	347 FORMAT (' Variables: ',A/ &
	1840	' Output every ',F8.2,' s')
	1841	348 FORMAT (' Variables: ',A/ &
	1842	' Output every ',F8.2,' s'/ &
	1843	' Time averaged over ',F8.2,' s'/ &
	1844	' Averaging input every ',F8.2,' s')
	1845	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1846	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1847	13(' ',8(F8.2,',')/) )
	1848	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1849	'all gridpoints along ',A,'-direction (default).' )
	1850	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1851	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1852	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1313]	1853	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
	1854	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
[1783]	1855	354 FORMAT (' Output format: ',A, ' compressed with level: ',I1/)
[4536]	1856	355 FORMAT (/' Restart data format(s):')
	1857	356 FORMAT (' Input format: ',A)
	1858	357 FORMAT (' Output format: ',A)
[1]	1859	400 FORMAT (//' Physical quantities:'/ &
	1860	' -------------------'/)
[4196]	1861	410 FORMAT (' Geograph. latitude : latitude = ',F5.1,' degr'/ &
	1862	' Geograph. longitude : longitude = ',F5.1,' degr'/ &
	1863	' Rotation angle : rotation_angle = ',F5.1,' degr'/ &
[1697]	1864	' Angular velocity : omega =',E10.3,' rad/s'/ &
[1551]	1865	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1866	' f* = ',F9.6,' 1/s')
	1867	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[1179]	1868	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
	1869	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1870	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
[1]	1871	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1872	' Height: ',A,' m'/ &
	1873	' Temperature: ',A,' K'/ &
	1874	' Gradient: ',A,' K/100m'/ &
	1875	' Gridpoint: ',A)
	1876	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1877	' Height: ',A,' m'/ &
	1878	' Humidity: ',A,' kg/kg'/ &
	1879	' Gradient: ',A,' (kg/kg)/100m'/ &
	1880	' Gridpoint: ',A)
	1881	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1882	' Height: ',A,' m'/ &
	1883	' Scalar concentration: ',A,' kg/m**3'/ &
	1884	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1885	' Gridpoint: ',A)
	1886	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1887	' Height: ',A,' m'/ &
	1888	' ug: ',A,' m/s'/ &
	1889	' Gradient: ',A,' 1/100s'/ &
	1890	' Gridpoint: ',A)
	1891	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1892	' Height: ',A,' m'/ &
[97]	1893	' vg: ',A,' m/s'/ &
[1]	1894	' Gradient: ',A,' 1/100s'/ &
	1895	' Gridpoint: ',A)
[97]	1896	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1897	' Height: ',A,' m'/ &
	1898	' Salinity: ',A,' psu'/ &
	1899	' Gradient: ',A,' psu/100m'/ &
	1900	' Gridpoint: ',A)
[411]	1901	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1902	' Height: ',A,' m'/ &
	1903	' w_subs: ',A,' m/s'/ &
	1904	' Gradient: ',A,' (m/s)/100m'/ &
	1905	' Gridpoint: ',A)
[767]	1906	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1907	' profiles')
[1241]	1908	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
	1909	' NUDGING_DATA')
[824]	1910	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1911	' ----------------------------------'/)
[1960]	1912	431 FORMAT (' Humidity is considered, bu no condensation')
[1]	1913	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1914	' ---------------------------'/)
[824]	1915	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1916	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
[4473]	1917	453 FORMAT (' Mixing length is limited close to surfaces')
[824]	1918	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1919	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[4227]	1920	456 FORMAT (/' Date and time at model start : ',A)
[3083]	1921	457 FORMAT (' RANS-mode constants: c_0 = ',F9.5/ &
	1922	' c_1 = ',F9.5/ &
	1923	' c_2 = ',F9.5/ &
	1924	' c_3 = ',F9.5/ &
	1925	' c_4 = ',F9.5/ &
	1926	' sigma_e = ',F9.5/ &
	1927	' sigma_diss = ',F9.5)
[1]	1928	470 FORMAT (//' Actions during the simulation:'/ &
	1929	' -----------------------------'/)
[94]	1930	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
[1697]	1931	' Disturbance amplitude : ',F5.2, ' m/s'/ &
[94]	1932	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1933	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1934	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1935	' to i/j =',I4)
	1936	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
[1697]	1937	F6.3, ' m2/s2')
[1]	1938	474 FORMAT (' Random number generator used : ',A/)
	1939	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1940	'respectively, if'/ &
	1941	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1942	' 3D-simulation'/)
[4573]	1943	476 FORMAT (' The surface temperature increases (or decreases, ', &
	1944	'respectively, if'/ &
	1945	' the value is negative) by ',F8.4,' K/h during the', &
	1946	' 3D-simulation'/)
	1947	477 FORMAT (' The surface humidity is increased (or decreased, ',&
[1]	1948	'respectively, if the'/ &
	1949	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1950	' the 3D-simulation'/)
[4573]	1951	478 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
[1]	1952	'respectively, if the'/ &
	1953	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1954	' the 3D-simulation'/)
	1955	500 FORMAT (//' 1D-Model parameters:'/ &
	1956	' -------------------'// &
	1957	' Simulation time: ',F8.1,' s'/ &
	1958	' Run-controll output every: ',F8.1,' s'/ &
	1959	' Vertical profile output every: ',F8.1,' s'/ &
	1960	' Mixing length calculation: ',A/ &
	1961	' Dissipation calculation: ',A/)
	1962	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1963	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1964	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[3529]	1965	512 FORMAT (/' Date: ',A10,6X,'Run: ',A34/ &
[1429]	1966	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1967	' Run on host: ',A10,6X,'En-No.: ',I2.2)
[4444]	1968	#if defined( __parallel )
[1791]	1969	600 FORMAT (/' Nesting informations:'/ &
	1970	' --------------------'/ &
[1797]	1971	' Nesting mode: ',A/ &
	1972	' Nesting-datatransfer mode: ',A// &
[1791]	1973	' Nest id parent number lower left coordinates name'/ &
	1974	' (*=me) id of PEs x (m) y (m)' )
	1975	601 FORMAT (2X,A1,1X,I2.2,6X,I2.2,5X,I5,5X,F8.2,2X,F8.2,5X,A)
[4444]	1976	#endif
[1]	1977
	1978	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |