Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 4580

Last change on this file since 4580 was 4573, checked in by oliver.maas, 4 years ago
pt_surface_heating_rate: calculate pt(0) incrementally by using dt_3d instead of calculating it absolutely by using time_since_reference_point, because time_since_reference_point is set to zero for initializing_actions = 'cyclic_fill', add statement for pt_surface_heating_rate in header.f90
Property svn:keywords set to `Id`
File size: 77.9 KB

Rev	Line
[4017]	1	! !> @file header.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[3589]	22	!
[4309]	23	!
[3589]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 4573 2020-06-24 13:08:47Z raasch $
[4573]	27	! added statement for pt_surface_heating_rate
	28	!
	29	! 4536 2020-05-17 17:24:13Z raasch
[4536]	30	! output of restart data format added
	31	!
	32	! 4473 2020-03-25 21:04:07Z gronemeier
[4473]	33	! revised message if wall_adjustment is used
	34	!
	35	! 4444 2020-03-05 15:59:50Z raasch
[4444]	36	! bugfix: cpp-directives for serial mode added
	37	!
	38	! 4360 2020-01-07 11:25:50Z suehring
[4339]	39	! Bugfix, character length too short, caused crash on NEC.
	40	!
	41	! 4309 2019-11-26 18:49:59Z suehring
[4309]	42	! replaced recycling_yshift by y_shift
	43	!
	44	! 4301 2019-11-22 12:09:09Z oliver.maas
[4301]	45	!
	46	! 4297 2019-11-21 10:37:50Z oliver.maas
[4300]	47	! Adjusted format for simulated time and related quantities
	48	!
	49	! 4297 2019-11-21 10:37:50Z oliver.maas
[4297]	50	! adjusted message to the changed parameter recycling_yshift
	51	!
	52	! 4227 2019-09-10 18:04:34Z gronemeier
[4227]	53	! implement new palm_date_time_mod
	54	!
	55	! 4223 2019-09-10 09:20:47Z gronemeier
[4196]	56	! Write information about rotation angle
	57	!
	58	! 4182 2019-08-22 15:20:23Z scharf
[4182]	59	! Corrected "Former revisions" section
	60	!
	61	! 4168 2019-08-16 13:50:17Z suehring
[4168]	62	! Replace function get_topography_top_index by topo_top_ind
	63	!
	64	! 4069 2019-07-01 14:05:51Z Giersch
[4069]	65	! Masked output running index mid has been introduced as a local variable to
	66	! avoid runtime error (Loop variable has been modified) in time_integration
	67	!
	68	! 4023 2019-06-12 13:20:01Z maronga
[4023]	69	! Renamed "coupling start time" to "spinup time"
	70	!
	71	! 4017 2019-06-06 12:16:46Z schwenkel
[3761]	72	! unused variable removed
	73	!
	74	! 3655 2019-01-07 16:51:22Z knoop
[3637]	75	! Implementation of the PALM module interface
[3298]	76	!
[4182]	77	! Revision 1.1 1997/08/11 06:17:20 raasch
	78	! Initial revision
	79	!
	80	!
[1]	81	! Description:
	82	! ------------
[1764]	83	!> Writing a header with all important information about the current run.
[1682]	84	!> This subroutine is called three times, two times at the beginning
	85	!> (writing information on files RUN_CONTROL and HEADER) and one time at the
	86	!> end of the run, then writing additional information about CPU-usage on file
	87	!> header.
[411]	88	!-----------------------------------------------------------------------------!
[1682]	89	SUBROUTINE header
	90
[1]	91
[1320]	92	USE arrays_3d, &
[2232]	93	ONLY: pt_init, q_init, s_init, sa_init, ug, vg, w_subs, zu, zw
[3274]	94
	95	USE basic_constants_and_equations_mod, &
[3761]	96	ONLY: g, kappa
[3274]	97
	98	USE bulk_cloud_model_mod, &
[3637]	99	ONLY: bulk_cloud_model
[3274]	100
[1]	101	USE control_parameters
[1849]	102
[1320]	103	USE cpulog, &
	104	ONLY: log_point_s
[3298]	105
[1320]	106	USE grid_variables, &
	107	ONLY: dx, dy
[2817]	108
[1320]	109	USE indices, &
	110	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
[4168]	111	nys_mg, nzt, nzt_mg, topo_top_ind
[3637]	112
[1320]	113	USE kinds
[1849]	114
[2338]	115	USE model_1d_mod, &
[1320]	116	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
[2338]	117
[3637]	118	USE module_interface, &
	119	ONLY: module_interface_header
	120
[1783]	121	USE netcdf_interface, &
	122	ONLY: netcdf_data_format, netcdf_data_format_string, netcdf_deflate
[3448]	123
[3294]	124	USE ocean_mod, &
[3637]	125	ONLY: ibc_sa_t, prho_reference, sa_surface, &
[3302]	126	sa_vertical_gradient, sa_vertical_gradient_level, &
	127	sa_vertical_gradient_level_ind
[3294]	128
[4227]	129	USE palm_date_time_mod, &
	130	ONLY: get_date_time
	131
[1]	132	USE pegrid
[1484]	133
[2967]	134	#if defined( __parallel )
[1791]	135	USE pmc_handle_communicator, &
	136	ONLY: pmc_get_model_info
	137
[1764]	138	USE pmc_interface, &
[1797]	139	ONLY: nested_run, nesting_datatransfer_mode, nesting_mode
[4444]	140	#endif
[1764]	141
[2232]	142	USE surface_mod, &
[4168]	143	ONLY: surf_def_h
[2232]	144
[3083]	145	USE turbulence_closure_mod, &
	146	ONLY: rans_const_c, rans_const_sigma
	147
[1]	148	IMPLICIT NONE
	149
[1320]	150
[3552]	151	CHARACTER (LEN=2) :: do2d_mode !< mode of 2D data output (xy, xz, yz)
[1320]	152
[3552]	153	CHARACTER (LEN=5) :: section_chr !< string indicating grid information where to output 2D slices
[1320]	154
[3552]	155	CHARACTER (LEN=10) :: host_chr !< string for hostname
[1320]	156
[3552]	157	CHARACTER (LEN=16) :: begin_chr !< string indication start time for the data output
[4339]	158	CHARACTER (LEN=16) :: coor_chr !< dummy string
[1320]	159
[3552]	160	CHARACTER (LEN=26) :: ver_rev !< string for run identification
[1791]	161
[4444]	162	#if defined( __parallel )
[3552]	163	CHARACTER (LEN=32) :: cpl_name !< name of child domain (nesting mode only)
[4444]	164	#endif
[1320]	165
[3552]	166	CHARACTER (LEN=40) :: output_format !< netcdf format
[4017]	167
[3552]	168	CHARACTER (LEN=70) :: char1 !< dummy varialbe used for various strings
	169	CHARACTER (LEN=70) :: char2 !< string containing informating about the advected distance in case of Galilei transformation
[4227]	170	CHARACTER (LEN=23) :: date_time_str !< string for date and time information
[3552]	171	CHARACTER (LEN=70) :: dopr_chr !< string indicating profile output variables
	172	CHARACTER (LEN=70) :: do2d_xy !< string indicating 2D-xy output variables
	173	CHARACTER (LEN=70) :: do2d_xz !< string indicating 2D-xz output variables
	174	CHARACTER (LEN=70) :: do2d_yz !< string indicating 2D-yz output variables
	175	CHARACTER (LEN=70) :: do3d_chr !< string indicating 3D output variables
	176	CHARACTER (LEN=70) :: domask_chr !< string indicating masked output variables
	177	CHARACTER (LEN=70) :: run_classification !< string classifying type of run, e.g. nested, coupled, etc.
[1320]	178
[3552]	179	CHARACTER (LEN=85) :: r_upper !< string indicating model top boundary condition for various quantities
	180	CHARACTER (LEN=85) :: r_lower !< string indicating bottom boundary condition for various quantities
[1320]	181
[3552]	182	CHARACTER (LEN=86) :: coordinates !< string indicating height coordinates for profile-prescribed variables
	183	CHARACTER (LEN=86) :: gradients !< string indicating gradients of profile-prescribed variables between the prescribed height coordinates
	184	CHARACTER (LEN=86) :: slices !< string indicating grid coordinates of profile-prescribed subsidence velocity
	185	CHARACTER (LEN=86) :: temperatures !< string indicating profile-prescribed subsidence velocities
	186	CHARACTER (LEN=86) :: ugcomponent !< string indicating profile-prescribed geostrophic u-component
	187	CHARACTER (LEN=86) :: vgcomponent !< string indicating profile-prescribed geostrophic v-component
[1]	188
[3552]	189	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !< string indicating masking steps along certain direction
[410]	190
[3552]	191	INTEGER(iwp) :: av !< index indicating average output quantities
	192	INTEGER(iwp) :: bh !< building height in generic single-building setup
	193	INTEGER(iwp) :: blx !< building width in grid points along x in generic single-building setup
	194	INTEGER(iwp) :: bly !< building width in grid points along y in generic single-building setup
	195	INTEGER(iwp) :: bxl !< index for left building wall in generic single-building setup
	196	INTEGER(iwp) :: bxr !< index for right building wall in generic single-building setup
	197	INTEGER(iwp) :: byn !< index for north building wall in generic single-building setup
	198	INTEGER(iwp) :: bys !< index for south building wall in generic single-building setup
	199	INTEGER(iwp) :: ch !< canyon depth in generic street-canyon setup
	200	INTEGER(iwp) :: count !< number of masked output locations
	201	INTEGER(iwp) :: cwx !< canyon width along x in generic street-canyon setup
	202	INTEGER(iwp) :: cwy !< canyon width along y in generic street-canyon setup
	203	INTEGER(iwp) :: cxl !< index for left canyon wall in generic street-canyon setup
	204	INTEGER(iwp) :: cxr !< index for right canyon wall in generic street-canyon setup
	205	INTEGER(iwp) :: cyn !< index for north canyon wall in generic street-canyon setup
	206	INTEGER(iwp) :: cys !< index for south canyon wall in generic street-canyon setup
	207	INTEGER(iwp) :: dim !< running index for masking output locations
	208	INTEGER(iwp) :: i !< running index for various loops
	209	INTEGER(iwp) :: io !< file unit of HEADER file
	210	INTEGER(iwp) :: l !< substring length
	211	INTEGER(iwp) :: ll !< substring length
[4069]	212	INTEGER(iwp) :: mid !< masked output running index
[4444]	213	#if defined( __parallel )
	214	INTEGER(iwp) :: cpl_parent_id !< parent ID for the respective child model
[3552]	215	INTEGER(iwp) :: my_cpl_id !< run id in a nested model setup
	216	INTEGER(iwp) :: n !< running index over number of couplers in a nested model setup
	217	INTEGER(iwp) :: ncpl !< number of coupler in a nested model setup
	218	INTEGER(iwp) :: npe_total !< number of total PEs in a coupler (parent + child)
[4444]	219	#endif
[1320]	220
[1826]	221
[3552]	222	REAL(wp) :: cpuseconds_per_simulated_second !< CPU time (in s) per simulated second
[4444]	223	#if defined( __parallel )
[1791]	224	REAL(wp) :: lower_left_coord_x !< x-coordinate of nest domain
	225	REAL(wp) :: lower_left_coord_y !< y-coordinate of nest domain
[4444]	226	#endif
[1]	227
	228	!
	229	!-- Open the output file. At the end of the simulation, output is directed
	230	!-- to unit 19.
	231	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	232	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	233	io = 15 ! header output on file RUN_CONTROL
	234	ELSE
	235	io = 19 ! header output on file HEADER
	236	ENDIF
	237	CALL check_open( io )
	238
	239	!
	240	!-- At the end of the run, output file (HEADER) will be rewritten with
[1551]	241	!-- new information
[1]	242	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	243
	244	!
	245	!-- Determine kind of model run
	246	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
[1764]	247	run_classification = 'restart run'
[328]	248	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
[1764]	249	run_classification = 'run with cyclic fill of 3D - prerun data'
[147]	250	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
[1764]	251	run_classification = 'run without 1D - prerun'
[197]	252	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[1764]	253	run_classification = 'run with 1D - prerun'
[2696]	254	ELSEIF ( INDEX( initializing_actions, 'inifor' ) /= 0 ) THEN
	255	run_classification = 'run initialized with COSMO data'
[197]	256	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
[1764]	257	run_classification = 'run initialized by user'
[3045]	258	ELSEIF ( INDEX( initializing_actions, 'initialize_vortex' ) /=0 ) THEN
	259	run_classification = 'run additionally initialized by a Rankine-vortex'
	260	ELSEIF ( INDEX( initializing_actions, 'initialize_ptanom' ) /=0 ) THEN
	261	run_classification = 'run additionally initialized by temperature anomaly'
[1]	262	ELSE
[254]	263	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	264	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	265	ENDIF
[4444]	266	#if defined( __parallel )
[3241]	267	IF ( nested_run ) run_classification = 'nested ' // run_classification(1:63)
[4444]	268	#endif
[3294]	269	IF ( ocean_mode ) THEN
[3241]	270	run_classification = 'ocean - ' // run_classification(1:61)
[97]	271	ELSE
[3241]	272	run_classification = 'atmosphere - ' // run_classification(1:57)
[97]	273	ENDIF
[1]	274
	275	!
	276	!-- Run-identification, date, time, host
	277	host_chr = host(1:10)
[75]	278	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	279	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	280	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
[2298]	281	WRITE ( io, 101 ) coupling_mode
[291]	282	ENDIF
[1108]	283	#if defined( __parallel )
[2299]	284	IF ( coupling_start_time /= 0.0_wp .AND. .NOT. spinup ) THEN
[1106]	285	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	286	WRITE ( io, 109 )
	287	ELSE
	288	WRITE ( io, 114 )
	289	ENDIF
	290	ENDIF
[1108]	291	#endif
[1429]	292	IF ( ensemble_member_nr /= 0 ) THEN
	293	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
	294	ADJUSTR( host_chr ), ensemble_member_nr
	295	ELSE
	296	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
[102]	297	ADJUSTR( host_chr )
[1429]	298	ENDIF
[1]	299	#if defined( __parallel )
[1482]	300	IF ( npex == -1 .AND. npey == -1 ) THEN
[1]	301	char1 = 'calculated'
	302	ELSE
	303	char1 = 'predefined'
	304	ENDIF
	305	IF ( threads_per_task == 1 ) THEN
[102]	306	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	307	ELSE
[102]	308	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	309	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	310	ENDIF
[2300]	311
	312	IF ( pdims(2) == 1 ) THEN
[102]	313	WRITE ( io, 107 ) 'x'
[1]	314	ELSEIF ( pdims(1) == 1 ) THEN
[102]	315	WRITE ( io, 107 ) 'y'
[1]	316	ENDIF
[759]	317	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	318	WRITE ( io, 108 ) maximum_parallel_io_streams
	319	ENDIF
[1]	320	#endif
[1764]	321
[4444]	322	#if defined( __parallel )
[1764]	323	!
	324	!-- Nesting informations
	325	IF ( nested_run ) THEN
[1791]	326
[1797]	327	WRITE ( io, 600 ) TRIM( nesting_mode ), &
	328	TRIM( nesting_datatransfer_mode )
[1791]	329	CALL pmc_get_model_info( ncpl = ncpl, cpl_id = my_cpl_id )
	330
	331	DO n = 1, ncpl
	332	CALL pmc_get_model_info( request_for_cpl_id = n, cpl_name = cpl_name,&
	333	cpl_parent_id = cpl_parent_id, &
	334	lower_left_x = lower_left_coord_x, &
	335	lower_left_y = lower_left_coord_y, &
	336	npe_total = npe_total )
	337	IF ( n == my_cpl_id ) THEN
	338	char1 = '*'
	339	ELSE
	340	char1 = ' '
	341	ENDIF
	342	WRITE ( io, 601 ) TRIM( char1 ), n, cpl_parent_id, npe_total, &
	343	lower_left_coord_x, lower_left_coord_y, &
	344	TRIM( cpl_name )
	345	ENDDO
[4444]	346
	347	ENDIF
[2967]	348	#endif
	349
[1]	350	WRITE ( io, 99 )
	351
	352	!
	353	!-- Numerical schemes
	354	WRITE ( io, 110 )
[2696]	355	IF ( rans_mode ) THEN
	356	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'RANS'
	357	ELSE
	358	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'LES'
	359	ENDIF
[2037]	360	WRITE ( io, 121 ) TRIM( approximation )
[1]	361	IF ( psolver(1:7) == 'poisfft' ) THEN
	362	WRITE ( io, 111 ) TRIM( fft_method )
[1216]	363	IF ( transpose_compute_overlap ) WRITE( io, 115 )
[1]	364	ELSEIF ( psolver == 'sor' ) THEN
	365	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
[1575]	366	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
	367	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
[1]	368	IF ( mg_cycles == -1 ) THEN
	369	WRITE ( io, 140 ) residual_limit
	370	ELSE
	371	WRITE ( io, 141 ) mg_cycles
	372	ENDIF
	373	IF ( mg_switch_to_pe0_level == 0 ) THEN
	374	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	375	nzt_mg(1)
[197]	376	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	377	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	378	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	379	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	380	nzt_mg(mg_switch_to_pe0_level), &
	381	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	382	nzt_mg(1)
	383	ENDIF
[1931]	384	IF ( psolver == 'multigrid_noopt' .AND. masking_method ) WRITE ( io, 144 )
[1]	385	ENDIF
	386	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	387	THEN
	388	WRITE ( io, 142 )
	389	ENDIF
	390
	391	IF ( momentum_advec == 'pw-scheme' ) THEN
	392	WRITE ( io, 113 )
[1299]	393	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
[667]	394	WRITE ( io, 503 )
[1]	395	ENDIF
	396	IF ( scalar_advec == 'pw-scheme' ) THEN
	397	WRITE ( io, 116 )
[667]	398	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	399	WRITE ( io, 504 )
[1]	400	ELSE
	401	WRITE ( io, 118 )
	402	ENDIF
[63]	403
	404	WRITE ( io, 139 ) TRIM( loop_optimization )
	405
[1]	406	IF ( galilei_transformation ) THEN
	407	IF ( use_ug_for_galilei_tr ) THEN
[868]	408	char1 = '0.6 * geostrophic wind'
[1]	409	ELSE
	410	char1 = 'mean wind in model domain'
	411	ENDIF
	412	IF ( simulated_time_at_begin == simulated_time ) THEN
	413	char2 = 'at the start of the run'
	414	ELSE
	415	char2 = 'at the end of the run'
	416	ENDIF
[1353]	417	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	418	advected_distance_x/1000.0_wp, &
	419	advected_distance_y/1000.0_wp
[1]	420	ENDIF
[1001]	421	WRITE ( io, 122 ) timestep_scheme
[87]	422	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1353]	423	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
[3294]	424	IF ( .NOT. ocean_mode ) THEN
[108]	425	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	426	rayleigh_damping_factor
	427	ELSE
	428	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	429	rayleigh_damping_factor
	430	ENDIF
[1]	431	ENDIF
[940]	432	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	433	IF ( humidity ) THEN
[3274]	434	IF ( .NOT. bulk_cloud_model ) THEN
[1]	435	WRITE ( io, 129 )
	436	ELSE
	437	WRITE ( io, 130 )
	438	ENDIF
	439	ENDIF
	440	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	441	IF ( conserve_volume_flow ) THEN
[241]	442	WRITE ( io, 150 ) conserve_volume_flow_mode
	443	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	444	WRITE ( io, 151 ) u_bulk, v_bulk
	445	ENDIF
[240]	446	ELSEIF ( dp_external ) THEN
	447	IF ( dp_smooth ) THEN
[241]	448	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	449	ELSE
[241]	450	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	451	ENDIF
	452	ENDIF
[1]	453	WRITE ( io, 99 )
	454
	455	!
[1551]	456	!-- Runtime and timestep information
[1]	457	WRITE ( io, 200 )
	458	IF ( .NOT. dt_fixed ) THEN
	459	WRITE ( io, 201 ) dt_max, cfl_factor
	460	ELSE
	461	WRITE ( io, 202 ) dt
	462	ENDIF
	463	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	464
[1322]	465	IF ( time_restart /= 9999999.9_wp .AND. &
[1]	466	simulated_time_at_begin == simulated_time ) THEN
[1322]	467	IF ( dt_restart == 9999999.9_wp ) THEN
[1]	468	WRITE ( io, 204 ) ' Restart at: ',time_restart
	469	ELSE
	470	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	471	ENDIF
	472	ENDIF
	473
	474	IF ( simulated_time_at_begin /= simulated_time ) THEN
	475	i = MAX ( log_point_s(10)%counts, 1 )
[1353]	476	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
	477	cpuseconds_per_simulated_second = 0.0_wp
[1]	478	ELSE
	479	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	480	( simulated_time - &
	481	simulated_time_at_begin )
	482	ENDIF
[1322]	483	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	484	log_point_s(10)%sum / REAL( i, KIND=wp ), &
[1]	485	cpuseconds_per_simulated_second
[1322]	486	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
	487	IF ( dt_restart == 9999999.9_wp ) THEN
[1106]	488	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	489	ELSE
[1106]	490	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	491	ENDIF
	492	ENDIF
	493	ENDIF
	494
[1324]	495
[1]	496	!
[291]	497	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	498	!-- and ocean are used or have been used. In this case, coupling_start_time
	499	!-- defines the time when the coupling is switched on.
[1353]	500	IF ( coupling_start_time /= 0.0_wp ) THEN
[1106]	501	WRITE ( io, 207 ) coupling_start_time
[291]	502	ENDIF
	503
	504	!
[1]	505	!-- Computational grid
[3294]	506	IF ( .NOT. ocean_mode ) THEN
[3065]	507	WRITE ( io, 250 ) dx, dy
	508
	509	DO i = 1, number_stretch_level_start+1
	510	WRITE ( io, 253 ) i, dz(i)
	511	ENDDO
	512
	513	WRITE( io, 251 ) (nx+1)dx, (ny+1)dy, zu(nzt+1)
	514
	515	IF ( ANY( dz_stretch_level_start_index < nzt+1 ) ) THEN
	516	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	517	DO i = 1, number_stretch_level_start
	518	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	519	ENDDO
	520	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	521	DO i = 1, number_stretch_level_start
	522	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	523	ENDDO
	524	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	525	DO i = 1, number_stretch_level_start
	526	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	527	ENDDO
	528	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	529	DO i = 1, number_stretch_level_start
	530	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	531	ENDDO
	532	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	533	DO i = 1, number_stretch_level_start
	534	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	535	ENDDO
[94]	536	ENDIF
[3065]	537
[94]	538	ELSE
[3065]	539	WRITE ( io, 250 ) dx, dy
	540	DO i = 1, number_stretch_level_start+1
	541	WRITE ( io, 253 ) i, dz(i)
	542	ENDDO
	543
	544	WRITE ( io, 251 ) (nx+1)dx, (ny+1)dy, zu(0)
	545
	546	IF ( ANY( dz_stretch_level_start_index > 0 ) ) THEN
	547	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	548	DO i = 1, number_stretch_level_start
	549	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	550	ENDDO
	551	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	552	DO i = 1, number_stretch_level_start
	553	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	554	ENDDO
	555	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	556	DO i = 1, number_stretch_level_start
	557	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	558	ENDDO
	559	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	560	DO i = 1, number_stretch_level_start
	561	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	562	ENDDO
	563	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	564	DO i = 1, number_stretch_level_start
	565	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	566	ENDDO
[94]	567	ENDIF
[1]	568	ENDIF
[3065]	569	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
[1]	570	MIN( nnz+2, nzt+2 )
	571	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	572
	573	!
[1365]	574	!-- Profile for the large scale vertial velocity
	575	!-- Building output strings, starting with surface value
	576	IF ( large_scale_subsidence ) THEN
	577	temperatures = ' 0.0'
	578	gradients = '------'
	579	slices = ' 0'
	580	coordinates = ' 0.0'
	581	i = 1
	582	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
	583
	584	WRITE (coor_chr,'(E10.2,7X)') &
	585	w_subs(subs_vertical_gradient_level_i(i))
	586	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	587
	588	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
	589	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	590
	591	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
	592	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	593
	594	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
	595	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	596
	597	IF ( i == 10 ) THEN
	598	EXIT
	599	ELSE
	600	i = i + 1
	601	ENDIF
	602
	603	ENDDO
	604
	605
	606	IF ( .NOT. large_scale_forcing ) THEN
	607	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	608	TRIM( gradients ), TRIM( slices )
	609	ENDIF
	610
	611
	612	ENDIF
	613
	614	!-- Profile of the geostrophic wind (component ug)
	615	!-- Building output strings
	616	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	617	gradients = '------'
	618	slices = ' 0'
	619	coordinates = ' 0.0'
	620	i = 1
	621	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	622
	623	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
	624	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	625
	626	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
	627	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	628
	629	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
	630	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	631
	632	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
	633	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	634
	635	IF ( i == 10 ) THEN
	636	EXIT
	637	ELSE
	638	i = i + 1
	639	ENDIF
	640
	641	ENDDO
	642
	643	IF ( .NOT. large_scale_forcing ) THEN
	644	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	645	TRIM( gradients ), TRIM( slices )
	646	ENDIF
	647
	648	!-- Profile of the geostrophic wind (component vg)
	649	!-- Building output strings
	650	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	651	gradients = '------'
	652	slices = ' 0'
	653	coordinates = ' 0.0'
	654	i = 1
	655	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	656
	657	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
	658	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	659
	660	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
	661	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	662
	663	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
	664	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	665
	666	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
	667	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	668
	669	IF ( i == 10 ) THEN
	670	EXIT
	671	ELSE
	672	i = i + 1
	673	ENDIF
	674
	675	ENDDO
	676
	677	IF ( .NOT. large_scale_forcing ) THEN
	678	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	679	TRIM( gradients ), TRIM( slices )
	680	ENDIF
	681
	682	!
[1]	683	!-- Topography
	684	WRITE ( io, 270 ) topography
	685	SELECT CASE ( TRIM( topography ) )
	686
	687	CASE ( 'flat' )
	688	! no actions necessary
	689
	690	CASE ( 'single_building' )
	691	blx = INT( building_length_x / dx )
	692	bly = INT( building_length_y / dy )
[1675]	693	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
	694	IF ( ABS( zw(bh ) - building_height ) == &
	695	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
[1]	696
[1322]	697	IF ( building_wall_left == 9999999.9_wp ) THEN
[1]	698	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	699	ENDIF
[1353]	700	bxl = INT ( building_wall_left / dx + 0.5_wp )
[1]	701	bxr = bxl + blx
	702
[1322]	703	IF ( building_wall_south == 9999999.9_wp ) THEN
[1]	704	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	705	ENDIF
[1353]	706	bys = INT ( building_wall_south / dy + 0.5_wp )
[1]	707	byn = bys + bly
	708
	709	WRITE ( io, 271 ) building_length_x, building_length_y, &
	710	building_height, bxl, bxr, bys, byn
	711
[240]	712	CASE ( 'single_street_canyon' )
[1675]	713	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
	714	IF ( ABS( zw(ch ) - canyon_height ) == &
	715	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
[1322]	716	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[240]	717	!
	718	!-- Street canyon in y direction
	719	cwx = NINT( canyon_width_x / dx )
[1322]	720	IF ( canyon_wall_left == 9999999.9_wp ) THEN
[240]	721	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	722	ENDIF
	723	cxl = NINT( canyon_wall_left / dx )
	724	cxr = cxl + cwx
	725	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	726
[1322]	727	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[240]	728	!
	729	!-- Street canyon in x direction
	730	cwy = NINT( canyon_width_y / dy )
[1322]	731	IF ( canyon_wall_south == 9999999.9_wp ) THEN
[240]	732	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	733	ENDIF
	734	cys = NINT( canyon_wall_south / dy )
	735	cyn = cys + cwy
	736	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	737	ENDIF
	738
[2232]	739	CASE ( 'tunnel' )
	740	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
	741	!
	742	!-- Tunnel axis in y direction
	743	IF ( tunnel_length == 9999999.9_wp .OR. &
	744	tunnel_length >= ( nx + 1 ) * dx ) THEN
	745	WRITE ( io, 273 ) 'y', tunnel_height, tunnel_wall_depth, &
	746	tunnel_width_x
	747	ELSE
	748	WRITE ( io, 274 ) 'y', tunnel_height, tunnel_wall_depth, &
	749	tunnel_width_x, tunnel_length
	750	ENDIF
	751
	752	ELSEIF ( tunnel_width_y /= 9999999.9_wp ) THEN
	753	!
	754	!-- Tunnel axis in x direction
	755	IF ( tunnel_length == 9999999.9_wp .OR. &
	756	tunnel_length >= ( ny + 1 ) * dy ) THEN
	757	WRITE ( io, 273 ) 'x', tunnel_height, tunnel_wall_depth, &
	758	tunnel_width_y
	759	ELSE
	760	WRITE ( io, 274 ) 'x', tunnel_height, tunnel_wall_depth, &
	761	tunnel_width_y, tunnel_length
	762	ENDIF
	763	ENDIF
	764
[1]	765	END SELECT
	766
[256]	767	IF ( TRIM( topography ) /= 'flat' ) THEN
	768	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	769	IF ( TRIM( topography ) == 'single_building' .OR. &
	770	TRIM( topography ) == 'single_street_canyon' ) THEN
	771	WRITE ( io, 278 )
	772	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	773	WRITE ( io, 279 )
	774	ENDIF
	775	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	776	WRITE ( io, 278 )
	777	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	778	WRITE ( io, 279 )
	779	ENDIF
	780	ENDIF
	781
[2550]	782	!-- Complex terrain
	783	IF ( complex_terrain ) THEN
	784	WRITE( io, 280 )
	785	IF ( turbulent_inflow ) THEN
[4168]	786	WRITE( io, 281 ) zu(topo_top_ind(0,0,0))
[2550]	787	ENDIF
	788	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	789	WRITE( io, 282 )
	790	ENDIF
	791	ENDIF
[3302]	792	!
[1]	793	!-- Boundary conditions
	794	IF ( ibc_p_b == 0 ) THEN
[1826]	795	r_lower = 'p(0) = 0 \|'
[1]	796	ELSEIF ( ibc_p_b == 1 ) THEN
[1826]	797	r_lower = 'p(0) = p(1) \|'
[1]	798	ENDIF
	799	IF ( ibc_p_t == 0 ) THEN
[1826]	800	r_upper = 'p(nzt+1) = 0 \|'
[1]	801	ELSE
[1826]	802	r_upper = 'p(nzt+1) = p(nzt) \|'
[1]	803	ENDIF
	804
	805	IF ( ibc_uv_b == 0 ) THEN
[1826]	806	r_lower = TRIM( r_lower ) // ' uv(0) = -uv(1) \|'
[1]	807	ELSE
[1826]	808	r_lower = TRIM( r_lower ) // ' uv(0) = uv(1) \|'
[1]	809	ENDIF
[132]	810	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
[1826]	811	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = 0 \|'
[132]	812	ELSEIF ( ibc_uv_t == 0 ) THEN
[1826]	813	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
[1]	814	ELSE
[1826]	815	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = uv(nzt) \|'
[1]	816	ENDIF
	817
	818	IF ( ibc_pt_b == 0 ) THEN
[1551]	819	IF ( land_surface ) THEN
[1826]	820	r_lower = TRIM( r_lower ) // ' pt(0) = from soil model'
[1551]	821	ELSE
[1826]	822	r_lower = TRIM( r_lower ) // ' pt(0) = pt_surface'
[1551]	823	ENDIF
[102]	824	ELSEIF ( ibc_pt_b == 1 ) THEN
[1826]	825	r_lower = TRIM( r_lower ) // ' pt(0) = pt(1)'
[102]	826	ELSEIF ( ibc_pt_b == 2 ) THEN
[1826]	827	r_lower = TRIM( r_lower ) // ' pt(0) = from coupled model'
[1]	828	ENDIF
	829	IF ( ibc_pt_t == 0 ) THEN
[1826]	830	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt_top'
[19]	831	ELSEIF( ibc_pt_t == 1 ) THEN
[1826]	832	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt)'
[19]	833	ELSEIF( ibc_pt_t == 2 ) THEN
[1826]	834	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	835
[1]	836	ENDIF
	837
[1826]	838	WRITE ( io, 300 ) r_lower, r_upper
[1]	839
	840	IF ( .NOT. constant_diffusion ) THEN
	841	IF ( ibc_e_b == 1 ) THEN
[1826]	842	r_lower = 'e(0) = e(1)'
[1]	843	ELSE
[1826]	844	r_lower = 'e(0) = e(1) = (u/0.1)*2'
[1]	845	ENDIF
[1826]	846	r_upper = 'e(nzt+1) = e(nzt) = e(nzt-1)'
[1]	847
[1826]	848	WRITE ( io, 301 ) 'e', r_lower, r_upper
[1]	849
	850	ENDIF
	851
[3294]	852	IF ( ocean_mode ) THEN
[1826]	853	r_lower = 'sa(0) = sa(1)'
[97]	854	IF ( ibc_sa_t == 0 ) THEN
[1826]	855	r_upper = 'sa(nzt+1) = sa_surface'
[1]	856	ELSE
[1826]	857	r_upper = 'sa(nzt+1) = sa(nzt)'
[1]	858	ENDIF
[1826]	859	WRITE ( io, 301 ) 'sa', r_lower, r_upper
[97]	860	ENDIF
[1]	861
[97]	862	IF ( humidity ) THEN
	863	IF ( ibc_q_b == 0 ) THEN
[1551]	864	IF ( land_surface ) THEN
[1826]	865	r_lower = 'q(0) = from soil model'
[1551]	866	ELSE
[1826]	867	r_lower = 'q(0) = q_surface'
[1551]	868	ENDIF
	869
[97]	870	ELSE
[1992]	871	r_lower = 'q(0) = q(1)'
[97]	872	ENDIF
	873	IF ( ibc_q_t == 0 ) THEN
[1992]	874	r_upper = 'q(nzt+1) = q_top'
[97]	875	ELSE
[1992]	876	r_upper = 'q(nzt+1) = q(nzt) + dq/dz'
[97]	877	ENDIF
[1826]	878	WRITE ( io, 301 ) 'q', r_lower, r_upper
[97]	879	ENDIF
[1]	880
[97]	881	IF ( passive_scalar ) THEN
[1960]	882	IF ( ibc_s_b == 0 ) THEN
[1992]	883	r_lower = 's(0) = s_surface'
[97]	884	ELSE
[1992]	885	r_lower = 's(0) = s(1)'
[97]	886	ENDIF
[1960]	887	IF ( ibc_s_t == 0 ) THEN
[1992]	888	r_upper = 's(nzt+1) = s_top'
	889	ELSEIF ( ibc_s_t == 1 ) THEN
	890	r_upper = 's(nzt+1) = s(nzt)'
	891	ELSEIF ( ibc_s_t == 2 ) THEN
	892	r_upper = 's(nzt+1) = s(nzt) + ds/dz'
[97]	893	ENDIF
[1826]	894	WRITE ( io, 301 ) 's', r_lower, r_upper
[1]	895	ENDIF
	896
	897	IF ( use_surface_fluxes ) THEN
	898	WRITE ( io, 303 )
	899	IF ( constant_heatflux ) THEN
[1299]	900	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	901	IF ( surf_def_h(0)%ns >= 1 ) WRITE ( io, 306 ) surf_def_h(0)%shf(1)
[1241]	902	ELSE
	903	WRITE ( io, 306 ) surface_heatflux
	904	ENDIF
[1]	905	IF ( random_heatflux ) WRITE ( io, 307 )
	906	ENDIF
[75]	907	IF ( humidity .AND. constant_waterflux ) THEN
[1299]	908	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	909	WRITE ( io, 311 ) surf_def_h(0)%qsws(1)
[1241]	910	ELSE
	911	WRITE ( io, 311 ) surface_waterflux
	912	ENDIF
[1]	913	ENDIF
[1960]	914	IF ( passive_scalar .AND. constant_scalarflux ) THEN
	915	WRITE ( io, 313 ) surface_scalarflux
[1]	916	ENDIF
	917	ENDIF
	918
[19]	919	IF ( use_top_fluxes ) THEN
	920	WRITE ( io, 304 )
[102]	921	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	922	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	923	IF ( constant_top_heatflux ) THEN
	924	WRITE ( io, 306 ) top_heatflux
	925	ENDIF
	926	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	927	WRITE ( io, 316 )
[19]	928	ENDIF
[3294]	929	IF ( ocean_mode .AND. constant_top_salinityflux ) &
[97]	930	WRITE ( io, 309 ) top_salinityflux
[1960]	931	IF ( humidity ) WRITE ( io, 315 )
[1992]	932	IF ( passive_scalar .AND. constant_top_scalarflux ) &
	933	WRITE ( io, 302 ) top_scalarflux
[19]	934	ENDIF
	935
[1691]	936	IF ( constant_flux_layer ) THEN
	937	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	938	z0h_factor*roughness_length, kappa, &
	939	zeta_min, zeta_max
[1]	940	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	941	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	942	WRITE ( io, 312 )
	943	ENDIF
[1960]	944	IF ( passive_scalar .AND. .NOT. constant_scalarflux ) THEN
[1]	945	WRITE ( io, 314 )
	946	ENDIF
	947	ELSE
	948	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
[1691]	949	WRITE ( io, 310 ) zeta_min, zeta_max
[1]	950	ENDIF
	951	ENDIF
	952
	953	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	954	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1159]	955	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
[151]	956	IF ( turbulent_inflow ) THEN
[4301]	957	IF ( y_shift == 0 ) THEN
[1560]	958	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	959	inflow_damping_height, inflow_damping_width
	960	ELSE
[4301]	961	WRITE ( io, 322 ) y_shift, recycling_width, recycling_plane, &
[1560]	962	inflow_damping_height, inflow_damping_width
	963	END IF
[151]	964	ENDIF
[2050]	965	IF ( turbulent_outflow ) THEN
	966	WRITE ( io, 323 ) outflow_source_plane, INT(outflow_source_plane/dx)
	967	ENDIF
[1]	968	ENDIF
	969
	970	!
[1365]	971	!-- Initial Profiles
	972	WRITE ( io, 321 )
	973	!
	974	!-- Initial wind profiles
	975	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
	976
	977	!
	978	!-- Initial temperature profile
	979	!-- Building output strings, starting with surface temperature
	980	WRITE ( temperatures, '(F6.2)' ) pt_surface
	981	gradients = '------'
	982	slices = ' 0'
	983	coordinates = ' 0.0'
	984	i = 1
	985	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	986
	987	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	988	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	989
	990	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	991	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	992
	993	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	994	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	995
	996	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	997	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	998
	999	IF ( i == 10 ) THEN
	1000	EXIT
	1001	ELSE
	1002	i = i + 1
	1003	ENDIF
	1004
	1005	ENDDO
	1006
	1007	IF ( .NOT. nudging ) THEN
	1008	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1009	TRIM( gradients ), TRIM( slices )
	1010	ELSE
	1011	WRITE ( io, 428 )
	1012	ENDIF
	1013
	1014	!
	1015	!-- Initial humidity profile
	1016	!-- Building output strings, starting with surface humidity
[1960]	1017	IF ( humidity ) THEN
[1365]	1018	WRITE ( temperatures, '(E8.1)' ) q_surface
	1019	gradients = '--------'
	1020	slices = ' 0'
	1021	coordinates = ' 0.0'
	1022	i = 1
	1023	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1024
	1025	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1026	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1027
	1028	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1029	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1030
	1031	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1032	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1033
	1034	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1035	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1036
	1037	IF ( i == 10 ) THEN
	1038	EXIT
	1039	ELSE
	1040	i = i + 1
	1041	ENDIF
	1042
	1043	ENDDO
	1044
[1960]	1045	IF ( .NOT. nudging ) THEN
	1046	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
[1365]	1047	TRIM( gradients ), TRIM( slices )
	1048	ENDIF
	1049	ENDIF
[1960]	1050	!
	1051	!-- Initial scalar profile
	1052	!-- Building output strings, starting with surface humidity
	1053	IF ( passive_scalar ) THEN
	1054	WRITE ( temperatures, '(E8.1)' ) s_surface
	1055	gradients = '--------'
	1056	slices = ' 0'
	1057	coordinates = ' 0.0'
	1058	i = 1
	1059	DO WHILE ( s_vertical_gradient_level_ind(i) /= -9999 )
	1060
[2073]	1061	WRITE (coor_chr,'(E8.1,4X)') s_init(s_vertical_gradient_level_ind(i))
[1960]	1062	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1365]	1063
[1960]	1064	WRITE (coor_chr,'(E8.1,4X)') s_vertical_gradient(i)
	1065	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1066
	1067	WRITE (coor_chr,'(I8,4X)') s_vertical_gradient_level_ind(i)
	1068	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1069
	1070	WRITE (coor_chr,'(F8.1,4X)') s_vertical_gradient_level(i)
	1071	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1072
	1073	IF ( i == 10 ) THEN
	1074	EXIT
	1075	ELSE
	1076	i = i + 1
	1077	ENDIF
	1078
	1079	ENDDO
	1080
	1081	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1082	TRIM( gradients ), TRIM( slices )
	1083	ENDIF
	1084
[1365]	1085	!
	1086	!-- Initial salinity profile
	1087	!-- Building output strings, starting with surface salinity
[3294]	1088	IF ( ocean_mode ) THEN
[1365]	1089	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1090	gradients = '------'
	1091	slices = ' 0'
	1092	coordinates = ' 0.0'
	1093	i = 1
	1094	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1095
	1096	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1097	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1098
	1099	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1100	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1101
	1102	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1103	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1104
	1105	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1106	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1107
	1108	IF ( i == 10 ) THEN
	1109	EXIT
	1110	ELSE
	1111	i = i + 1
	1112	ENDIF
	1113
	1114	ENDDO
	1115
	1116	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1117	TRIM( gradients ), TRIM( slices )
	1118	ENDIF
	1119
	1120
	1121	!
[1]	1122	!-- Listing of 1D-profiles
[151]	1123	WRITE ( io, 325 ) dt_dopr_listing
[1353]	1124	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1125	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1126	ENDIF
	1127
	1128	!
	1129	!-- DATA output
	1130	WRITE ( io, 330 )
[1353]	1131	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1132	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1133	ENDIF
	1134
	1135	!
	1136	!-- 1D-profiles
[346]	1137	dopr_chr = 'Profile:'
[1]	1138	IF ( dopr_n /= 0 ) THEN
	1139	WRITE ( io, 331 )
	1140
	1141	output_format = ''
[1783]	1142	output_format = netcdf_data_format_string
	1143	IF ( netcdf_deflate == 0 ) THEN
	1144	WRITE ( io, 344 ) output_format
	1145	ELSE
	1146	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1147	ENDIF
[1]	1148
	1149	DO i = 1, dopr_n
	1150	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	1151	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	1152	WRITE ( io, 332 ) dopr_chr
	1153	dopr_chr = ' :'
	1154	ENDIF
	1155	ENDDO
	1156
	1157	IF ( dopr_chr /= '' ) THEN
	1158	WRITE ( io, 332 ) dopr_chr
	1159	ENDIF
	1160	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
[1353]	1161	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
[1]	1162	ENDIF
	1163
	1164	!
	1165	!-- 2D-arrays
	1166	DO av = 0, 1
	1167
	1168	i = 1
	1169	do2d_xy = ''
	1170	do2d_xz = ''
	1171	do2d_yz = ''
	1172	DO WHILE ( do2d(av,i) /= ' ' )
	1173
	1174	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	1175	do2d_mode = do2d(av,i)(l-1:l)
	1176
	1177	SELECT CASE ( do2d_mode )
	1178	CASE ( 'xy' )
	1179	ll = LEN_TRIM( do2d_xy )
	1180	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1181	CASE ( 'xz' )
	1182	ll = LEN_TRIM( do2d_xz )
	1183	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1184	CASE ( 'yz' )
	1185	ll = LEN_TRIM( do2d_yz )
	1186	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1187	END SELECT
	1188
	1189	i = i + 1
	1190
	1191	ENDDO
	1192
	1193	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	1194	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
[1327]	1195	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
[1]	1196
	1197	IF ( av == 0 ) THEN
	1198	WRITE ( io, 334 ) ''
	1199	ELSE
	1200	WRITE ( io, 334 ) '(time-averaged)'
	1201	ENDIF
	1202
	1203	IF ( do2d_at_begin ) THEN
	1204	begin_chr = 'and at the start'
	1205	ELSE
	1206	begin_chr = ''
	1207	ENDIF
	1208
	1209	output_format = ''
[1783]	1210	output_format = netcdf_data_format_string
	1211	IF ( netcdf_deflate == 0 ) THEN
	1212	WRITE ( io, 344 ) output_format
	1213	ELSE
	1214	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1215	ENDIF
[1]	1216
	1217	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	1218	i = 1
	1219	slices = '/'
	1220	coordinates = '/'
	1221	!
[1551]	1222	!-- Building strings with index and coordinate information of the
[1]	1223	!-- slices
	1224	DO WHILE ( section(i,1) /= -9999 )
	1225
	1226	WRITE (section_chr,'(I5)') section(i,1)
	1227	section_chr = ADJUSTL( section_chr )
	1228	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1229
[206]	1230	IF ( section(i,1) == -1 ) THEN
[1353]	1231	WRITE (coor_chr,'(F10.1)') -1.0_wp
[206]	1232	ELSE
	1233	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	1234	ENDIF
[1]	1235	coor_chr = ADJUSTL( coor_chr )
	1236	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1237
	1238	i = i + 1
	1239	ENDDO
	1240	IF ( av == 0 ) THEN
	1241	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	1242	TRIM( begin_chr ), 'k', TRIM( slices ), &
	1243	TRIM( coordinates )
[1353]	1244	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
[1]	1245	WRITE ( io, 339 ) skip_time_do2d_xy
	1246	ENDIF
	1247	ELSE
	1248	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	1249	TRIM( begin_chr ), averaging_interval, &
	1250	dt_averaging_input, 'k', TRIM( slices ), &
	1251	TRIM( coordinates )
[1353]	1252	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1253	WRITE ( io, 339 ) skip_time_data_output_av
	1254	ENDIF
	1255	ENDIF
[1308]	1256	IF ( netcdf_data_format > 4 ) THEN
	1257	WRITE ( io, 352 ) ntdim_2d_xy(av)
	1258	ELSE
	1259	WRITE ( io, 353 )
	1260	ENDIF
[1]	1261	ENDIF
	1262
	1263	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	1264	i = 1
	1265	slices = '/'
	1266	coordinates = '/'
	1267	!
[1551]	1268	!-- Building strings with index and coordinate information of the
[1]	1269	!-- slices
	1270	DO WHILE ( section(i,2) /= -9999 )
	1271
	1272	WRITE (section_chr,'(I5)') section(i,2)
	1273	section_chr = ADJUSTL( section_chr )
	1274	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1275
	1276	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	1277	coor_chr = ADJUSTL( coor_chr )
	1278	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1279
	1280	i = i + 1
	1281	ENDDO
	1282	IF ( av == 0 ) THEN
	1283	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	1284	TRIM( begin_chr ), 'j', TRIM( slices ), &
	1285	TRIM( coordinates )
[1353]	1286	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
[1]	1287	WRITE ( io, 339 ) skip_time_do2d_xz
	1288	ENDIF
	1289	ELSE
	1290	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	1291	TRIM( begin_chr ), averaging_interval, &
	1292	dt_averaging_input, 'j', TRIM( slices ), &
	1293	TRIM( coordinates )
[1353]	1294	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1295	WRITE ( io, 339 ) skip_time_data_output_av
	1296	ENDIF
	1297	ENDIF
[1308]	1298	IF ( netcdf_data_format > 4 ) THEN
	1299	WRITE ( io, 352 ) ntdim_2d_xz(av)
	1300	ELSE
	1301	WRITE ( io, 353 )
	1302	ENDIF
[1]	1303	ENDIF
	1304
	1305	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	1306	i = 1
	1307	slices = '/'
	1308	coordinates = '/'
	1309	!
[1551]	1310	!-- Building strings with index and coordinate information of the
[1]	1311	!-- slices
	1312	DO WHILE ( section(i,3) /= -9999 )
	1313
	1314	WRITE (section_chr,'(I5)') section(i,3)
	1315	section_chr = ADJUSTL( section_chr )
	1316	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1317
	1318	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	1319	coor_chr = ADJUSTL( coor_chr )
	1320	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1321
	1322	i = i + 1
	1323	ENDDO
	1324	IF ( av == 0 ) THEN
	1325	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	1326	TRIM( begin_chr ), 'i', TRIM( slices ), &
	1327	TRIM( coordinates )
[1353]	1328	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
[1]	1329	WRITE ( io, 339 ) skip_time_do2d_yz
	1330	ENDIF
	1331	ELSE
	1332	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	1333	TRIM( begin_chr ), averaging_interval, &
	1334	dt_averaging_input, 'i', TRIM( slices ), &
	1335	TRIM( coordinates )
[1353]	1336	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1337	WRITE ( io, 339 ) skip_time_data_output_av
	1338	ENDIF
	1339	ENDIF
[1308]	1340	IF ( netcdf_data_format > 4 ) THEN
	1341	WRITE ( io, 352 ) ntdim_2d_yz(av)
	1342	ELSE
	1343	WRITE ( io, 353 )
	1344	ENDIF
[1]	1345	ENDIF
	1346
	1347	ENDIF
	1348
	1349	ENDDO
	1350
	1351	!
	1352	!-- 3d-arrays
	1353	DO av = 0, 1
	1354
	1355	i = 1
	1356	do3d_chr = ''
	1357	DO WHILE ( do3d(av,i) /= ' ' )
	1358
	1359	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	1360	i = i + 1
	1361
	1362	ENDDO
	1363
	1364	IF ( do3d_chr /= '' ) THEN
	1365	IF ( av == 0 ) THEN
	1366	WRITE ( io, 336 ) ''
	1367	ELSE
	1368	WRITE ( io, 336 ) '(time-averaged)'
	1369	ENDIF
	1370
[1783]	1371	output_format = netcdf_data_format_string
	1372	IF ( netcdf_deflate == 0 ) THEN
	1373	WRITE ( io, 344 ) output_format
	1374	ELSE
	1375	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1376	ENDIF
[1]	1377
	1378	IF ( do3d_at_begin ) THEN
	1379	begin_chr = 'and at the start'
	1380	ELSE
	1381	begin_chr = ''
	1382	ENDIF
	1383	IF ( av == 0 ) THEN
	1384	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1385	zu(nz_do3d), nz_do3d
	1386	ELSE
	1387	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1388	TRIM( begin_chr ), averaging_interval, &
	1389	dt_averaging_input, zu(nz_do3d), nz_do3d
	1390	ENDIF
	1391
[1308]	1392	IF ( netcdf_data_format > 4 ) THEN
	1393	WRITE ( io, 352 ) ntdim_3d(av)
	1394	ELSE
	1395	WRITE ( io, 353 )
	1396	ENDIF
	1397
[1]	1398	IF ( av == 0 ) THEN
[1353]	1399	IF ( skip_time_do3d /= 0.0_wp ) THEN
[1]	1400	WRITE ( io, 339 ) skip_time_do3d
	1401	ENDIF
	1402	ELSE
[1353]	1403	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1404	WRITE ( io, 339 ) skip_time_data_output_av
	1405	ENDIF
	1406	ENDIF
	1407
	1408	ENDIF
	1409
	1410	ENDDO
	1411
	1412	!
[410]	1413	!-- masked arrays
	1414	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1415	mask_scale_x, mask_scale_y, mask_scale_z
	1416	DO mid = 1, masks
	1417	DO av = 0, 1
	1418
	1419	i = 1
	1420	domask_chr = ''
	1421	DO WHILE ( domask(mid,av,i) /= ' ' )
	1422	domask_chr = TRIM( domask_chr ) // ' ' // &
	1423	TRIM( domask(mid,av,i) ) // ','
	1424	i = i + 1
	1425	ENDDO
	1426
	1427	IF ( domask_chr /= '' ) THEN
	1428	IF ( av == 0 ) THEN
	1429	WRITE ( io, 346 ) '', mid
	1430	ELSE
	1431	WRITE ( io, 346 ) ' (time-averaged)', mid
	1432	ENDIF
	1433
[1783]	1434	output_format = netcdf_data_format_string
[1308]	1435	!-- Parallel output not implemented for mask data, hence
	1436	!-- output_format must be adjusted.
	1437	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
	1438	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
[1783]	1439	IF ( netcdf_deflate == 0 ) THEN
	1440	WRITE ( io, 344 ) output_format
	1441	ELSE
	1442	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1443	ENDIF
[410]	1444
	1445	IF ( av == 0 ) THEN
	1446	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1447	ELSE
	1448	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1449	averaging_interval, dt_averaging_input
	1450	ENDIF
	1451
	1452	IF ( av == 0 ) THEN
[1353]	1453	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
[410]	1454	WRITE ( io, 339 ) skip_time_domask(mid)
	1455	ENDIF
	1456	ELSE
[1353]	1457	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[410]	1458	WRITE ( io, 339 ) skip_time_data_output_av
	1459	ENDIF
	1460	ENDIF
	1461	!
	1462	!-- output locations
	1463	DO dim = 1, 3
[1353]	1464	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
[410]	1465	count = 0
[1353]	1466	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
[410]	1467	count = count + 1
	1468	ENDDO
	1469	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1470	mask(mid,dim,:count)
[1353]	1471	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
	1472	mask_loop(mid,dim,2) < 0.0_wp .AND. &
	1473	mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1474	WRITE ( io, 350 ) dir(dim), dir(dim)
[1353]	1475	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1476	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1477	mask_loop(mid,dim,1:2)
	1478	ELSE
	1479	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1480	mask_loop(mid,dim,1:3)
	1481	ENDIF
	1482	ENDDO
	1483	ENDIF
	1484
	1485	ENDDO
	1486	ENDDO
	1487
	1488	!
[1]	1489	!-- Timeseries
[1322]	1490	IF ( dt_dots /= 9999999.9_wp ) THEN
[1]	1491	WRITE ( io, 340 )
	1492
[1783]	1493	output_format = netcdf_data_format_string
	1494	IF ( netcdf_deflate == 0 ) THEN
	1495	WRITE ( io, 344 ) output_format
	1496	ELSE
	1497	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1498	ENDIF
[1]	1499	WRITE ( io, 341 ) dt_dots
	1500	ENDIF
	1501
[4536]	1502	!
	1503	!-- Restart data formats
	1504	IF ( TRIM( initializing_actions ) == 'read_restart_data' .OR. write_binary ) THEN
	1505	WRITE ( io, 355 )
	1506	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	1507	WRITE ( io, 356 ) TRIM( restart_data_format_input )
	1508	ENDIF
	1509	IF ( write_binary ) THEN
	1510	WRITE ( io, 357 ) TRIM( restart_data_format_output )
	1511	ENDIF
	1512	ENDIF
	1513
[1]	1514	WRITE ( io, 99 )
	1515
	1516	!
	1517	!-- Physical quantities
	1518	WRITE ( io, 400 )
	1519
	1520	!
	1521	!-- Geostrophic parameters
[4196]	1522	WRITE ( io, 410 ) latitude, longitude, rotation_angle, omega, f, fs
[1]	1523
[3241]	1524	!
[4227]	1525	!-- Day and time during model start
	1526	CALL get_date_time( 0.0_wp, date_time_str=date_time_str )
	1527	WRITE ( io, 456 ) TRIM( date_time_str )
	1528
[1]	1529	!
	1530	!-- Other quantities
	1531	WRITE ( io, 411 ) g
[1551]	1532
[1179]	1533	WRITE ( io, 412 ) TRIM( reference_state )
	1534	IF ( use_single_reference_value ) THEN
[3294]	1535	IF ( ocean_mode ) THEN
[1179]	1536	WRITE ( io, 413 ) prho_reference
[97]	1537	ELSE
[1179]	1538	WRITE ( io, 414 ) pt_reference
[97]	1539	ENDIF
	1540	ENDIF
[1]	1541
	1542	!
[824]	1543	!-- Cloud physcis parameters / quantities / numerical methods
	1544	WRITE ( io, 430 )
[3274]	1545	IF ( humidity .AND. .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets) THEN
[824]	1546	WRITE ( io, 431 )
[3274]	1547	ENDIF
[824]	1548	!
[1]	1549	!-- LES / turbulence parameters
	1550	WRITE ( io, 450 )
	1551
	1552	!--
	1553	! ... LES-constants used must still be added here
	1554	!--
	1555	IF ( constant_diffusion ) THEN
	1556	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1557	prandtl_number
	1558	ENDIF
	1559	IF ( .NOT. constant_diffusion) THEN
[1353]	1560	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
	1561	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
[4473]	1562	IF ( wall_adjustment ) WRITE ( io, 453 )
[1]	1563	ENDIF
[3083]	1564	IF ( rans_mode ) THEN
	1565	WRITE ( io, 457 ) rans_const_c, rans_const_sigma
	1566	ENDIF
[1]	1567	!
	1568	!-- Special actions during the run
	1569	WRITE ( io, 470 )
	1570	IF ( create_disturbances ) THEN
	1571	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1572	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1573	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1574	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1575	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1576	ELSE
	1577	WRITE ( io, 473 ) disturbance_energy_limit
	1578	ENDIF
	1579	WRITE ( io, 474 ) TRIM( random_generator )
	1580	ENDIF
[1353]	1581	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
[1]	1582	WRITE ( io, 475 ) pt_surface_initial_change
	1583	ENDIF
[4573]	1584	IF ( pt_surface_heating_rate /= 0.0_wp ) THEN
	1585	WRITE ( io, 476 ) pt_surface_heating_rate
	1586	ENDIF
[1353]	1587	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
[4573]	1588	WRITE ( io, 477 ) q_surface_initial_change
[1]	1589	ENDIF
[1353]	1590	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
[4573]	1591	WRITE ( io, 478 ) q_surface_initial_change
[1]	1592	ENDIF
	1593
	1594	!
	1595	!-- Parameters of 1D-model
	1596	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1597	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1598	mixing_length_1d, dissipation_1d
	1599	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1600	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1601	ENDIF
	1602	ENDIF
	1603
	1604	!
[3637]	1605	!-- Header information from other modules
	1606	CALL module_interface_header( io )
[1]	1607
[3637]	1608
[1]	1609	WRITE ( io, 99 )
	1610
	1611	!
	1612	!-- Write buffer contents to disc immediately
[1808]	1613	FLUSH( io )
[1]	1614
	1615	!
	1616	!-- Here the FORMATs start
	1617
	1618	99 FORMAT (1X,78('-'))
[1468]	1619	100 FORMAT (/1X,'******************************',4X,44('-')/ &
	1620	1X,'* ',A,' *',4X,A/ &
	1621	1X,'******************************',4X,44('-'))
[2298]	1622	101 FORMAT (35X,'coupled run: ',A/ &
[1468]	1623	35X,42('-'))
[3529]	1624	102 FORMAT (/' Date: ',A10,4X,'Run: ',A34/ &
[1468]	1625	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
[1106]	1626	' Run on host: ',A10)
[1]	1627	#if defined( __parallel )
[1468]	1628	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
[1]	1629	')',1X,A)
[1468]	1630	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
	1631	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
	1632	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
	1633	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
	1634	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
	1635	35X,42('-'))
	1636	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
	1637	35X,'independent precursor runs'/ &
	1638	35X,42('-'))
[1]	1639	#endif
	1640	110 FORMAT (/' Numerical Schemes:'/ &
	1641	' -----------------'/)
[2696]	1642	124 FORMAT (' --> Use the ',A,' turbulence closure (',A,' mode).')
[2037]	1643	121 FORMAT (' --> Use the ',A,' approximation for the model equations.')
[1]	1644	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1645	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
[1697]	1646	' Iterations (initial/other): ',I3,'/',I3,' omega =',F6.3)
[1]	1647	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1648	' or Upstream')
[1216]	1649	115 FORMAT (' FFT and transpositions are overlapping')
[1]	1650	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1651	' or Upstream')
	1652	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1653	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1654	' translation velocity = ',A/ &
[1]	1655	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1656	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1657	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1697]	1658	' maximum damping coefficient:',F6.3, ' 1/s')
[1]	1659	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1660	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1661	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1662	F6.2, ' K assumed')
[1]	1663	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
[1575]	1664	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
[1]	1665	A,'-cycle)'/ &
	1666	' number of grid levels: ',I2/ &
	1667	' Gauss-Seidel red/black iterations: ',I2)
	1668	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1669	I3,')')
	1670	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1671	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1672	I3,')'/ &
	1673	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1674	I3,')')
[63]	1675	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1676	140 FORMAT (' maximum residual allowed: ',E10.3)
	1677	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1678	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1679	'step')
[87]	1680	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1681	'kinetic energy')
[927]	1682	144 FORMAT (' masking method is used')
[1]	1683	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1684	'conserved'/ &
	1685	' using the ',A,' mode')
	1686	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1687	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1688	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1689	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1690	200 FORMAT (//' Run time and time step information:'/ &
	1691	' ----------------------------------'/)
[1106]	1692	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1697]	1693	' CFL-factor:',F5.2)
[1106]	1694	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
[4300]	1695	203 FORMAT ( ' Start time: ',F11.3,' s'/ &
	1696	' End time: ',F11.3,' s')
	1697	204 FORMAT ( A,F11.3,' s')
	1698	205 FORMAT ( A,F11.3,' s',5X,'restart every',17X,F11.3,' s')
	1699	206 FORMAT (/' Time reached: ',F11.3,' s'/ &
	1700	' CPU-time used: ',F9.3,' s per timestep: ',F9.3,' s'/ &
	1701	' per second of simulated time: ',F9.3,' s')
	1702	207 FORMAT ( ' Spinup time: ',F11.3,' s')
[1]	1703	250 FORMAT (//' Computational grid and domain size:'/ &
	1704	' ----------------------------------'// &
[3065]	1705	' Grid length: dx = ',F8.3,' m dy = ',F8.3, ' m')
	1706	251 FORMAT ( /' Domain size: x = ',F10.3,' m y = ',F10.3, &
[1]	1707	' m z(u) = ',F10.3,' m'/)
[3065]	1708	253 FORMAT ( ' dz(',I1,') = ', F8.3, ' m')
	1709	254 FORMAT (//' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
[1]	1710	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1711	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1712	' degrees')
[1551]	1713	270 FORMAT (//' Topography information:'/ &
	1714	' ----------------------'// &
[1]	1715	1X,'Topography: ',A)
	1716	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1717	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1718	' / ',I4)
[240]	1719	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1720	' direction' / &
	1721	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1722	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[2232]	1723	273 FORMAT ( ' Tunnel of infinite length in ',A, &
	1724	' direction' / &
	1725	' Tunnel height: ', F6.2, / &
	1726	' Tunnel-wall depth: ', F6.2 / &
	1727	' Tunnel width: ', F6.2 )
	1728	274 FORMAT ( ' Tunnel in ', A, ' direction.' / &
	1729	' Tunnel height: ', F6.2, / &
	1730	' Tunnel-wall depth: ', F6.2 / &
	1731	' Tunnel width: ', F6.2, / &
	1732	' Tunnel length: ', F6.2 )
[256]	1733	278 FORMAT (' Topography grid definition convention:'/ &
	1734	' cell edge (staggered grid points'/ &
	1735	' (u in x-direction, v in y-direction))' /)
	1736	279 FORMAT (' Topography grid definition convention:'/ &
	1737	' cell center (scalar grid points)' /)
[2550]	1738	280 FORMAT (' Complex terrain simulation is activated.')
	1739	281 FORMAT (' --> Mean inflow profiles are adjusted.' / &
	1740	' --> Elevation of inflow boundary: ', F7.1, ' m' )
	1741	282 FORMAT (' --> Initial data from 3D-precursor run is shifted' / &
	1742	' vertically depending on local surface height.')
[1]	1743	300 FORMAT (//' Boundary conditions:'/ &
	1744	' -------------------'// &
	1745	' p uv ', &
[1551]	1746	' pt'// &
[1]	1747	' B. bound.: ',A/ &
	1748	' T. bound.: ',A)
[97]	1749	301 FORMAT (/' ',A// &
[1]	1750	' B. bound.: ',A/ &
	1751	' T. bound.: ',A)
[19]	1752	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1753	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
[2270]	1754	305 FORMAT (//' Constant flux layer between bottom surface and first ', &
	1755	'computational u,v-level:'// &
	1756	' z_mo = ',F6.2,' m z0 =',F7.4,' m z0h =',F8.5,&
[1697]	1757	' m kappa =',F5.2/ &
	1758	' Rif value range: ',F8.2,' <= rif <=',F6.2)
[97]	1759	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1760	307 FORMAT (' Heatflux has a random normal distribution')
	1761	308 FORMAT (' Predefined surface temperature')
[97]	1762	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1763	310 FORMAT (//' 1D-Model:'// &
	1764	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[1960]	1765	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' kg/kg m/s')
[1]	1766	312 FORMAT (' Predefined surface humidity')
	1767	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1768	314 FORMAT (' Predefined scalar value at the surface')
[1992]	1769	302 FORMAT (' Predefined constant scalarflux: ',F9.6,' kg/(m**2 s)')
	1770	315 FORMAT (' Humidity flux at top surface is 0.0')
[102]	1771	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1772	'atmosphere model')
[1]	1773	317 FORMAT (//' Lateral boundaries:'/ &
	1774	' left/right: ',A/ &
	1775	' north/south: ',A)
[1159]	1776	318 FORMAT (/' use_cmax: ',L1 / &
	1777	' pt damping layer width = ',F8.2,' m, pt ', &
[1697]	1778	'damping factor =',F7.4)
[151]	1779	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1780	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1781	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1782	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1783	' v: ',F9.6,' m2/s2')
[1365]	1784	321 FORMAT (//' Initial profiles:'/ &
	1785	' ----------------')
[1560]	1786	322 FORMAT (' turbulence recycling at inflow switched on'/ &
[4301]	1787	' y-shift of the recycled inflow turbulence is',I3,' PE'/ &
[1560]	1788	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
[1592]	1789	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/)
[2050]	1790	323 FORMAT (' turbulent outflow conditon switched on'/ &
	1791	' position of outflow source plane: ',F7.1,' m ', &
	1792	'grid index: ', I4)
[151]	1793	325 FORMAT (//' List output:'/ &
[1]	1794	' -----------'// &
	1795	' 1D-Profiles:'/ &
[2883]	1796	' Output every ',F10.2,' s')
[151]	1797	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1798	' Averaging input every ',F8.2,' s')
	1799	330 FORMAT (//' Data output:'/ &
	1800	' -----------'/)
	1801	331 FORMAT (/' 1D-Profiles:')
	1802	332 FORMAT (/' ',A)
	1803	333 FORMAT (' Output every ',F8.2,' s',/ &
	1804	' Time averaged over ',F8.2,' s'/ &
	1805	' Averaging input every ',F8.2,' s')
	1806	334 FORMAT (/' 2D-Arrays',A,':')
	1807	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1808	' Output every ',F8.2,' s ',A/ &
	1809	' Cross sections at ',A1,' = ',A/ &
	1810	' scalar-coordinates: ',A,' m'/)
	1811	336 FORMAT (/' 3D-Arrays',A,':')
	1812	337 FORMAT (/' Arrays: ',A/ &
	1813	' Output every ',F8.2,' s ',A/ &
	1814	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1815	339 FORMAT (' No output during initial ',F8.2,' s')
	1816	340 FORMAT (/' Time series:')
	1817	341 FORMAT (' Output every ',F8.2,' s'/)
	1818	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1819	' Output every ',F8.2,' s ',A/ &
	1820	' Time averaged over ',F8.2,' s'/ &
	1821	' Averaging input every ',F8.2,' s'/ &
	1822	' Cross sections at ',A1,' = ',A/ &
	1823	' scalar-coordinates: ',A,' m'/)
	1824	343 FORMAT (/' Arrays: ',A/ &
	1825	' Output every ',F8.2,' s ',A/ &
	1826	' Time averaged over ',F8.2,' s'/ &
	1827	' Averaging input every ',F8.2,' s'/ &
	1828	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1829	344 FORMAT (' Output format: ',A/)
[410]	1830	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1831	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1832	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1833	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1834	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1835	347 FORMAT (' Variables: ',A/ &
	1836	' Output every ',F8.2,' s')
	1837	348 FORMAT (' Variables: ',A/ &
	1838	' Output every ',F8.2,' s'/ &
	1839	' Time averaged over ',F8.2,' s'/ &
	1840	' Averaging input every ',F8.2,' s')
	1841	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1842	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1843	13(' ',8(F8.2,',')/) )
	1844	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1845	'all gridpoints along ',A,'-direction (default).' )
	1846	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1847	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1848	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1313]	1849	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
	1850	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
[1783]	1851	354 FORMAT (' Output format: ',A, ' compressed with level: ',I1/)
[4536]	1852	355 FORMAT (/' Restart data format(s):')
	1853	356 FORMAT (' Input format: ',A)
	1854	357 FORMAT (' Output format: ',A)
[1]	1855	400 FORMAT (//' Physical quantities:'/ &
	1856	' -------------------'/)
[4196]	1857	410 FORMAT (' Geograph. latitude : latitude = ',F5.1,' degr'/ &
	1858	' Geograph. longitude : longitude = ',F5.1,' degr'/ &
	1859	' Rotation angle : rotation_angle = ',F5.1,' degr'/ &
[1697]	1860	' Angular velocity : omega =',E10.3,' rad/s'/ &
[1551]	1861	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1862	' f* = ',F9.6,' 1/s')
	1863	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[1179]	1864	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
	1865	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1866	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
[1]	1867	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1868	' Height: ',A,' m'/ &
	1869	' Temperature: ',A,' K'/ &
	1870	' Gradient: ',A,' K/100m'/ &
	1871	' Gridpoint: ',A)
	1872	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1873	' Height: ',A,' m'/ &
	1874	' Humidity: ',A,' kg/kg'/ &
	1875	' Gradient: ',A,' (kg/kg)/100m'/ &
	1876	' Gridpoint: ',A)
	1877	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1878	' Height: ',A,' m'/ &
	1879	' Scalar concentration: ',A,' kg/m**3'/ &
	1880	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1881	' Gridpoint: ',A)
	1882	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1883	' Height: ',A,' m'/ &
	1884	' ug: ',A,' m/s'/ &
	1885	' Gradient: ',A,' 1/100s'/ &
	1886	' Gridpoint: ',A)
	1887	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1888	' Height: ',A,' m'/ &
[97]	1889	' vg: ',A,' m/s'/ &
[1]	1890	' Gradient: ',A,' 1/100s'/ &
	1891	' Gridpoint: ',A)
[97]	1892	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1893	' Height: ',A,' m'/ &
	1894	' Salinity: ',A,' psu'/ &
	1895	' Gradient: ',A,' psu/100m'/ &
	1896	' Gridpoint: ',A)
[411]	1897	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1898	' Height: ',A,' m'/ &
	1899	' w_subs: ',A,' m/s'/ &
	1900	' Gradient: ',A,' (m/s)/100m'/ &
	1901	' Gridpoint: ',A)
[767]	1902	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1903	' profiles')
[1241]	1904	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
	1905	' NUDGING_DATA')
[824]	1906	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1907	' ----------------------------------'/)
[1960]	1908	431 FORMAT (' Humidity is considered, bu no condensation')
[1]	1909	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1910	' ---------------------------'/)
[824]	1911	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1912	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
[4473]	1913	453 FORMAT (' Mixing length is limited close to surfaces')
[824]	1914	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1915	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[4227]	1916	456 FORMAT (/' Date and time at model start : ',A)
[3083]	1917	457 FORMAT (' RANS-mode constants: c_0 = ',F9.5/ &
	1918	' c_1 = ',F9.5/ &
	1919	' c_2 = ',F9.5/ &
	1920	' c_3 = ',F9.5/ &
	1921	' c_4 = ',F9.5/ &
	1922	' sigma_e = ',F9.5/ &
	1923	' sigma_diss = ',F9.5)
[1]	1924	470 FORMAT (//' Actions during the simulation:'/ &
	1925	' -----------------------------'/)
[94]	1926	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
[1697]	1927	' Disturbance amplitude : ',F5.2, ' m/s'/ &
[94]	1928	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1929	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1930	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1931	' to i/j =',I4)
	1932	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
[1697]	1933	F6.3, ' m2/s2')
[1]	1934	474 FORMAT (' Random number generator used : ',A/)
	1935	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1936	'respectively, if'/ &
	1937	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1938	' 3D-simulation'/)
[4573]	1939	476 FORMAT (' The surface temperature increases (or decreases, ', &
	1940	'respectively, if'/ &
	1941	' the value is negative) by ',F8.4,' K/h during the', &
	1942	' 3D-simulation'/)
	1943	477 FORMAT (' The surface humidity is increased (or decreased, ',&
[1]	1944	'respectively, if the'/ &
	1945	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1946	' the 3D-simulation'/)
[4573]	1947	478 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
[1]	1948	'respectively, if the'/ &
	1949	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1950	' the 3D-simulation'/)
	1951	500 FORMAT (//' 1D-Model parameters:'/ &
	1952	' -------------------'// &
	1953	' Simulation time: ',F8.1,' s'/ &
	1954	' Run-controll output every: ',F8.1,' s'/ &
	1955	' Vertical profile output every: ',F8.1,' s'/ &
	1956	' Mixing length calculation: ',A/ &
	1957	' Dissipation calculation: ',A/)
	1958	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1959	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1960	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[3529]	1961	512 FORMAT (/' Date: ',A10,6X,'Run: ',A34/ &
[1429]	1962	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1963	' Run on host: ',A10,6X,'En-No.: ',I2.2)
[4444]	1964	#if defined( __parallel )
[1791]	1965	600 FORMAT (/' Nesting informations:'/ &
	1966	' --------------------'/ &
[1797]	1967	' Nesting mode: ',A/ &
	1968	' Nesting-datatransfer mode: ',A// &
[1791]	1969	' Nest id parent number lower left coordinates name'/ &
	1970	' (*=me) id of PEs x (m) y (m)' )
	1971	601 FORMAT (2X,A1,1X,I2.2,6X,I2.2,5X,I5,5X,F8.2,2X,F8.2,5X,A)
[4444]	1972	#endif
[1]	1973
	1974	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |