Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 4526

Last change on this file since 4526 was 4473, checked in by gronemeier, 5 years ago
revised naming of mixing length and some further cleaning of mixing-length calculation
Property svn:keywords set to `Id`
File size: 76.9 KB

Rev	Line
[4017]	1	! !> @file header.f90
[2000]	2	!------------------------------------------------------------------------------!
[2696]	3	! This file is part of the PALM model system.
[1036]	4	!
[2000]	5	! PALM is free software: you can redistribute it and/or modify it under the
	6	! terms of the GNU General Public License as published by the Free Software
	7	! Foundation, either version 3 of the License, or (at your option) any later
	8	! version.
[1036]	9	!
	10	! PALM is distributed in the hope that it will be useful, but WITHOUT ANY
	11	! WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
	12	! A PARTICULAR PURPOSE. See the GNU General Public License for more details.
	13	!
	14	! You should have received a copy of the GNU General Public License along with
	15	! PALM. If not, see <http://www.gnu.org/licenses/>.
	16	!
[4360]	17	! Copyright 1997-2020 Leibniz Universitaet Hannover
[2000]	18	!------------------------------------------------------------------------------!
[1036]	19	!
[254]	20	! Current revisions:
[1]	21	! -----------------
[3589]	22	!
[4309]	23	!
[3589]	24	! Former revisions:
	25	! -----------------
	26	! $Id: header.f90 4473 2020-03-25 21:04:07Z oliver.maas $
[4473]	27	! revised message if wall_adjustment is used
	28	!
	29	! 4444 2020-03-05 15:59:50Z raasch
[4444]	30	! bugfix: cpp-directives for serial mode added
	31	!
	32	! 4360 2020-01-07 11:25:50Z suehring
[4339]	33	! Bugfix, character length too short, caused crash on NEC.
	34	!
	35	! 4309 2019-11-26 18:49:59Z suehring
[4309]	36	! replaced recycling_yshift by y_shift
	37	!
	38	! 4301 2019-11-22 12:09:09Z oliver.maas
[4301]	39	!
	40	! 4297 2019-11-21 10:37:50Z oliver.maas
[4300]	41	! Adjusted format for simulated time and related quantities
	42	!
	43	! 4297 2019-11-21 10:37:50Z oliver.maas
[4297]	44	! adjusted message to the changed parameter recycling_yshift
	45	!
	46	! 4227 2019-09-10 18:04:34Z gronemeier
[4227]	47	! implement new palm_date_time_mod
	48	!
	49	! 4223 2019-09-10 09:20:47Z gronemeier
[4196]	50	! Write information about rotation angle
	51	!
	52	! 4182 2019-08-22 15:20:23Z scharf
[4182]	53	! Corrected "Former revisions" section
	54	!
	55	! 4168 2019-08-16 13:50:17Z suehring
[4168]	56	! Replace function get_topography_top_index by topo_top_ind
	57	!
	58	! 4069 2019-07-01 14:05:51Z Giersch
[4069]	59	! Masked output running index mid has been introduced as a local variable to
	60	! avoid runtime error (Loop variable has been modified) in time_integration
	61	!
	62	! 4023 2019-06-12 13:20:01Z maronga
[4023]	63	! Renamed "coupling start time" to "spinup time"
	64	!
	65	! 4017 2019-06-06 12:16:46Z schwenkel
[3761]	66	! unused variable removed
	67	!
	68	! 3655 2019-01-07 16:51:22Z knoop
[3637]	69	! Implementation of the PALM module interface
[3298]	70	!
[4182]	71	! Revision 1.1 1997/08/11 06:17:20 raasch
	72	! Initial revision
	73	!
	74	!
[1]	75	! Description:
	76	! ------------
[1764]	77	!> Writing a header with all important information about the current run.
[1682]	78	!> This subroutine is called three times, two times at the beginning
	79	!> (writing information on files RUN_CONTROL and HEADER) and one time at the
	80	!> end of the run, then writing additional information about CPU-usage on file
	81	!> header.
[411]	82	!-----------------------------------------------------------------------------!
[1682]	83	SUBROUTINE header
	84
[1]	85
[1320]	86	USE arrays_3d, &
[2232]	87	ONLY: pt_init, q_init, s_init, sa_init, ug, vg, w_subs, zu, zw
[3274]	88
	89	USE basic_constants_and_equations_mod, &
[3761]	90	ONLY: g, kappa
[3274]	91
	92	USE bulk_cloud_model_mod, &
[3637]	93	ONLY: bulk_cloud_model
[3274]	94
[1]	95	USE control_parameters
[1849]	96
[1320]	97	USE cpulog, &
	98	ONLY: log_point_s
[3298]	99
[1320]	100	USE grid_variables, &
	101	ONLY: dx, dy
[2817]	102
[1320]	103	USE indices, &
	104	ONLY: mg_loc_ind, nnx, nny, nnz, nx, ny, nxl_mg, nxr_mg, nyn_mg, &
[4168]	105	nys_mg, nzt, nzt_mg, topo_top_ind
[3637]	106
[1320]	107	USE kinds
[1849]	108
[2338]	109	USE model_1d_mod, &
[1320]	110	ONLY: damp_level_ind_1d, dt_pr_1d, dt_run_control_1d, end_time_1d
[2338]	111
[3637]	112	USE module_interface, &
	113	ONLY: module_interface_header
	114
[1783]	115	USE netcdf_interface, &
	116	ONLY: netcdf_data_format, netcdf_data_format_string, netcdf_deflate
[3448]	117
[3294]	118	USE ocean_mod, &
[3637]	119	ONLY: ibc_sa_t, prho_reference, sa_surface, &
[3302]	120	sa_vertical_gradient, sa_vertical_gradient_level, &
	121	sa_vertical_gradient_level_ind
[3294]	122
[4227]	123	USE palm_date_time_mod, &
	124	ONLY: get_date_time
	125
[1]	126	USE pegrid
[1484]	127
[2967]	128	#if defined( __parallel )
[1791]	129	USE pmc_handle_communicator, &
	130	ONLY: pmc_get_model_info
	131
[1764]	132	USE pmc_interface, &
[1797]	133	ONLY: nested_run, nesting_datatransfer_mode, nesting_mode
[4444]	134	#endif
[1764]	135
[2232]	136	USE surface_mod, &
[4168]	137	ONLY: surf_def_h
[2232]	138
[3083]	139	USE turbulence_closure_mod, &
	140	ONLY: rans_const_c, rans_const_sigma
	141
[1]	142	IMPLICIT NONE
	143
[1320]	144
[3552]	145	CHARACTER (LEN=2) :: do2d_mode !< mode of 2D data output (xy, xz, yz)
[1320]	146
[3552]	147	CHARACTER (LEN=5) :: section_chr !< string indicating grid information where to output 2D slices
[1320]	148
[3552]	149	CHARACTER (LEN=10) :: host_chr !< string for hostname
[1320]	150
[3552]	151	CHARACTER (LEN=16) :: begin_chr !< string indication start time for the data output
[4339]	152	CHARACTER (LEN=16) :: coor_chr !< dummy string
[1320]	153
[3552]	154	CHARACTER (LEN=26) :: ver_rev !< string for run identification
[1791]	155
[4444]	156	#if defined( __parallel )
[3552]	157	CHARACTER (LEN=32) :: cpl_name !< name of child domain (nesting mode only)
[4444]	158	#endif
[1320]	159
[3552]	160	CHARACTER (LEN=40) :: output_format !< netcdf format
[4017]	161
[3552]	162	CHARACTER (LEN=70) :: char1 !< dummy varialbe used for various strings
	163	CHARACTER (LEN=70) :: char2 !< string containing informating about the advected distance in case of Galilei transformation
[4227]	164	CHARACTER (LEN=23) :: date_time_str !< string for date and time information
[3552]	165	CHARACTER (LEN=70) :: dopr_chr !< string indicating profile output variables
	166	CHARACTER (LEN=70) :: do2d_xy !< string indicating 2D-xy output variables
	167	CHARACTER (LEN=70) :: do2d_xz !< string indicating 2D-xz output variables
	168	CHARACTER (LEN=70) :: do2d_yz !< string indicating 2D-yz output variables
	169	CHARACTER (LEN=70) :: do3d_chr !< string indicating 3D output variables
	170	CHARACTER (LEN=70) :: domask_chr !< string indicating masked output variables
	171	CHARACTER (LEN=70) :: run_classification !< string classifying type of run, e.g. nested, coupled, etc.
[1320]	172
[3552]	173	CHARACTER (LEN=85) :: r_upper !< string indicating model top boundary condition for various quantities
	174	CHARACTER (LEN=85) :: r_lower !< string indicating bottom boundary condition for various quantities
[1320]	175
[3552]	176	CHARACTER (LEN=86) :: coordinates !< string indicating height coordinates for profile-prescribed variables
	177	CHARACTER (LEN=86) :: gradients !< string indicating gradients of profile-prescribed variables between the prescribed height coordinates
	178	CHARACTER (LEN=86) :: slices !< string indicating grid coordinates of profile-prescribed subsidence velocity
	179	CHARACTER (LEN=86) :: temperatures !< string indicating profile-prescribed subsidence velocities
	180	CHARACTER (LEN=86) :: ugcomponent !< string indicating profile-prescribed geostrophic u-component
	181	CHARACTER (LEN=86) :: vgcomponent !< string indicating profile-prescribed geostrophic v-component
[1]	182
[3552]	183	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /) !< string indicating masking steps along certain direction
[410]	184
[3552]	185	INTEGER(iwp) :: av !< index indicating average output quantities
	186	INTEGER(iwp) :: bh !< building height in generic single-building setup
	187	INTEGER(iwp) :: blx !< building width in grid points along x in generic single-building setup
	188	INTEGER(iwp) :: bly !< building width in grid points along y in generic single-building setup
	189	INTEGER(iwp) :: bxl !< index for left building wall in generic single-building setup
	190	INTEGER(iwp) :: bxr !< index for right building wall in generic single-building setup
	191	INTEGER(iwp) :: byn !< index for north building wall in generic single-building setup
	192	INTEGER(iwp) :: bys !< index for south building wall in generic single-building setup
	193	INTEGER(iwp) :: ch !< canyon depth in generic street-canyon setup
	194	INTEGER(iwp) :: count !< number of masked output locations
	195	INTEGER(iwp) :: cwx !< canyon width along x in generic street-canyon setup
	196	INTEGER(iwp) :: cwy !< canyon width along y in generic street-canyon setup
	197	INTEGER(iwp) :: cxl !< index for left canyon wall in generic street-canyon setup
	198	INTEGER(iwp) :: cxr !< index for right canyon wall in generic street-canyon setup
	199	INTEGER(iwp) :: cyn !< index for north canyon wall in generic street-canyon setup
	200	INTEGER(iwp) :: cys !< index for south canyon wall in generic street-canyon setup
	201	INTEGER(iwp) :: dim !< running index for masking output locations
	202	INTEGER(iwp) :: i !< running index for various loops
	203	INTEGER(iwp) :: io !< file unit of HEADER file
	204	INTEGER(iwp) :: l !< substring length
	205	INTEGER(iwp) :: ll !< substring length
[4069]	206	INTEGER(iwp) :: mid !< masked output running index
[4444]	207	#if defined( __parallel )
	208	INTEGER(iwp) :: cpl_parent_id !< parent ID for the respective child model
[3552]	209	INTEGER(iwp) :: my_cpl_id !< run id in a nested model setup
	210	INTEGER(iwp) :: n !< running index over number of couplers in a nested model setup
	211	INTEGER(iwp) :: ncpl !< number of coupler in a nested model setup
	212	INTEGER(iwp) :: npe_total !< number of total PEs in a coupler (parent + child)
[4444]	213	#endif
[1320]	214
[1826]	215
[3552]	216	REAL(wp) :: cpuseconds_per_simulated_second !< CPU time (in s) per simulated second
[4444]	217	#if defined( __parallel )
[1791]	218	REAL(wp) :: lower_left_coord_x !< x-coordinate of nest domain
	219	REAL(wp) :: lower_left_coord_y !< y-coordinate of nest domain
[4444]	220	#endif
[1]	221
	222	!
	223	!-- Open the output file. At the end of the simulation, output is directed
	224	!-- to unit 19.
	225	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	226	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	227	io = 15 ! header output on file RUN_CONTROL
	228	ELSE
	229	io = 19 ! header output on file HEADER
	230	ENDIF
	231	CALL check_open( io )
	232
	233	!
	234	!-- At the end of the run, output file (HEADER) will be rewritten with
[1551]	235	!-- new information
[1]	236	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	237
	238	!
	239	!-- Determine kind of model run
	240	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
[1764]	241	run_classification = 'restart run'
[328]	242	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
[1764]	243	run_classification = 'run with cyclic fill of 3D - prerun data'
[147]	244	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
[1764]	245	run_classification = 'run without 1D - prerun'
[197]	246	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[1764]	247	run_classification = 'run with 1D - prerun'
[2696]	248	ELSEIF ( INDEX( initializing_actions, 'inifor' ) /= 0 ) THEN
	249	run_classification = 'run initialized with COSMO data'
[197]	250	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
[1764]	251	run_classification = 'run initialized by user'
[3045]	252	ELSEIF ( INDEX( initializing_actions, 'initialize_vortex' ) /=0 ) THEN
	253	run_classification = 'run additionally initialized by a Rankine-vortex'
	254	ELSEIF ( INDEX( initializing_actions, 'initialize_ptanom' ) /=0 ) THEN
	255	run_classification = 'run additionally initialized by temperature anomaly'
[1]	256	ELSE
[254]	257	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	258	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	259	ENDIF
[4444]	260	#if defined( __parallel )
[3241]	261	IF ( nested_run ) run_classification = 'nested ' // run_classification(1:63)
[4444]	262	#endif
[3294]	263	IF ( ocean_mode ) THEN
[3241]	264	run_classification = 'ocean - ' // run_classification(1:61)
[97]	265	ELSE
[3241]	266	run_classification = 'atmosphere - ' // run_classification(1:57)
[97]	267	ENDIF
[1]	268
	269	!
	270	!-- Run-identification, date, time, host
	271	host_chr = host(1:10)
[75]	272	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	273	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	274	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
[2298]	275	WRITE ( io, 101 ) coupling_mode
[291]	276	ENDIF
[1108]	277	#if defined( __parallel )
[2299]	278	IF ( coupling_start_time /= 0.0_wp .AND. .NOT. spinup ) THEN
[1106]	279	IF ( coupling_start_time > simulated_time_at_begin ) THEN
	280	WRITE ( io, 109 )
	281	ELSE
	282	WRITE ( io, 114 )
	283	ENDIF
	284	ENDIF
[1108]	285	#endif
[1429]	286	IF ( ensemble_member_nr /= 0 ) THEN
	287	WRITE ( io, 512 ) run_date, run_identifier, run_time, runnr, &
	288	ADJUSTR( host_chr ), ensemble_member_nr
	289	ELSE
	290	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
[102]	291	ADJUSTR( host_chr )
[1429]	292	ENDIF
[1]	293	#if defined( __parallel )
[1482]	294	IF ( npex == -1 .AND. npey == -1 ) THEN
[1]	295	char1 = 'calculated'
	296	ELSE
	297	char1 = 'predefined'
	298	ENDIF
	299	IF ( threads_per_task == 1 ) THEN
[102]	300	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	301	ELSE
[102]	302	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	303	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	304	ENDIF
[2300]	305
	306	IF ( pdims(2) == 1 ) THEN
[102]	307	WRITE ( io, 107 ) 'x'
[1]	308	ELSEIF ( pdims(1) == 1 ) THEN
[102]	309	WRITE ( io, 107 ) 'y'
[1]	310	ENDIF
[759]	311	IF ( numprocs /= maximum_parallel_io_streams ) THEN
	312	WRITE ( io, 108 ) maximum_parallel_io_streams
	313	ENDIF
[1]	314	#endif
[1764]	315
[4444]	316	#if defined( __parallel )
[1764]	317	!
	318	!-- Nesting informations
	319	IF ( nested_run ) THEN
[1791]	320
[1797]	321	WRITE ( io, 600 ) TRIM( nesting_mode ), &
	322	TRIM( nesting_datatransfer_mode )
[1791]	323	CALL pmc_get_model_info( ncpl = ncpl, cpl_id = my_cpl_id )
	324
	325	DO n = 1, ncpl
	326	CALL pmc_get_model_info( request_for_cpl_id = n, cpl_name = cpl_name,&
	327	cpl_parent_id = cpl_parent_id, &
	328	lower_left_x = lower_left_coord_x, &
	329	lower_left_y = lower_left_coord_y, &
	330	npe_total = npe_total )
	331	IF ( n == my_cpl_id ) THEN
	332	char1 = '*'
	333	ELSE
	334	char1 = ' '
	335	ENDIF
	336	WRITE ( io, 601 ) TRIM( char1 ), n, cpl_parent_id, npe_total, &
	337	lower_left_coord_x, lower_left_coord_y, &
	338	TRIM( cpl_name )
	339	ENDDO
[4444]	340
	341	ENDIF
[2967]	342	#endif
	343
[1]	344	WRITE ( io, 99 )
	345
	346	!
	347	!-- Numerical schemes
	348	WRITE ( io, 110 )
[2696]	349	IF ( rans_mode ) THEN
	350	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'RANS'
	351	ELSE
	352	WRITE ( io, 124 ) TRIM( turbulence_closure ), 'LES'
	353	ENDIF
[2037]	354	WRITE ( io, 121 ) TRIM( approximation )
[1]	355	IF ( psolver(1:7) == 'poisfft' ) THEN
	356	WRITE ( io, 111 ) TRIM( fft_method )
[1216]	357	IF ( transpose_compute_overlap ) WRITE( io, 115 )
[1]	358	ELSEIF ( psolver == 'sor' ) THEN
	359	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
[1575]	360	ELSEIF ( psolver(1:9) == 'multigrid' ) THEN
	361	WRITE ( io, 135 ) TRIM(psolver), cycle_mg, maximum_grid_level, ngsrb
[1]	362	IF ( mg_cycles == -1 ) THEN
	363	WRITE ( io, 140 ) residual_limit
	364	ELSE
	365	WRITE ( io, 141 ) mg_cycles
	366	ENDIF
	367	IF ( mg_switch_to_pe0_level == 0 ) THEN
	368	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	369	nzt_mg(1)
[197]	370	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	371	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	372	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	373	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	374	nzt_mg(mg_switch_to_pe0_level), &
	375	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	376	nzt_mg(1)
	377	ENDIF
[1931]	378	IF ( psolver == 'multigrid_noopt' .AND. masking_method ) WRITE ( io, 144 )
[1]	379	ENDIF
	380	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	381	THEN
	382	WRITE ( io, 142 )
	383	ENDIF
	384
	385	IF ( momentum_advec == 'pw-scheme' ) THEN
	386	WRITE ( io, 113 )
[1299]	387	ELSEIF (momentum_advec == 'ws-scheme' ) THEN
[667]	388	WRITE ( io, 503 )
[1]	389	ENDIF
	390	IF ( scalar_advec == 'pw-scheme' ) THEN
	391	WRITE ( io, 116 )
[667]	392	ELSEIF ( scalar_advec == 'ws-scheme' ) THEN
	393	WRITE ( io, 504 )
[1]	394	ELSE
	395	WRITE ( io, 118 )
	396	ENDIF
[63]	397
	398	WRITE ( io, 139 ) TRIM( loop_optimization )
	399
[1]	400	IF ( galilei_transformation ) THEN
	401	IF ( use_ug_for_galilei_tr ) THEN
[868]	402	char1 = '0.6 * geostrophic wind'
[1]	403	ELSE
	404	char1 = 'mean wind in model domain'
	405	ENDIF
	406	IF ( simulated_time_at_begin == simulated_time ) THEN
	407	char2 = 'at the start of the run'
	408	ELSE
	409	char2 = 'at the end of the run'
	410	ENDIF
[1353]	411	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	412	advected_distance_x/1000.0_wp, &
	413	advected_distance_y/1000.0_wp
[1]	414	ENDIF
[1001]	415	WRITE ( io, 122 ) timestep_scheme
[87]	416	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1353]	417	IF ( rayleigh_damping_factor /= 0.0_wp ) THEN
[3294]	418	IF ( .NOT. ocean_mode ) THEN
[108]	419	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	420	rayleigh_damping_factor
	421	ELSE
	422	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	423	rayleigh_damping_factor
	424	ENDIF
[1]	425	ENDIF
[940]	426	IF ( neutral ) WRITE ( io, 131 ) pt_surface
[75]	427	IF ( humidity ) THEN
[3274]	428	IF ( .NOT. bulk_cloud_model ) THEN
[1]	429	WRITE ( io, 129 )
	430	ELSE
	431	WRITE ( io, 130 )
	432	ENDIF
	433	ENDIF
	434	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	435	IF ( conserve_volume_flow ) THEN
[241]	436	WRITE ( io, 150 ) conserve_volume_flow_mode
	437	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	438	WRITE ( io, 151 ) u_bulk, v_bulk
	439	ENDIF
[240]	440	ELSEIF ( dp_external ) THEN
	441	IF ( dp_smooth ) THEN
[241]	442	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	443	ELSE
[241]	444	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	445	ENDIF
	446	ENDIF
[1]	447	WRITE ( io, 99 )
	448
	449	!
[1551]	450	!-- Runtime and timestep information
[1]	451	WRITE ( io, 200 )
	452	IF ( .NOT. dt_fixed ) THEN
	453	WRITE ( io, 201 ) dt_max, cfl_factor
	454	ELSE
	455	WRITE ( io, 202 ) dt
	456	ENDIF
	457	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	458
[1322]	459	IF ( time_restart /= 9999999.9_wp .AND. &
[1]	460	simulated_time_at_begin == simulated_time ) THEN
[1322]	461	IF ( dt_restart == 9999999.9_wp ) THEN
[1]	462	WRITE ( io, 204 ) ' Restart at: ',time_restart
	463	ELSE
	464	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	465	ENDIF
	466	ENDIF
	467
	468	IF ( simulated_time_at_begin /= simulated_time ) THEN
	469	i = MAX ( log_point_s(10)%counts, 1 )
[1353]	470	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0_wp ) THEN
	471	cpuseconds_per_simulated_second = 0.0_wp
[1]	472	ELSE
	473	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	474	( simulated_time - &
	475	simulated_time_at_begin )
	476	ENDIF
[1322]	477	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	478	log_point_s(10)%sum / REAL( i, KIND=wp ), &
[1]	479	cpuseconds_per_simulated_second
[1322]	480	IF ( time_restart /= 9999999.9_wp .AND. time_restart < end_time ) THEN
	481	IF ( dt_restart == 9999999.9_wp ) THEN
[1106]	482	WRITE ( io, 204 ) ' Next restart at: ',time_restart
[1]	483	ELSE
[1106]	484	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
[1]	485	ENDIF
	486	ENDIF
	487	ENDIF
	488
[1324]	489
[1]	490	!
[291]	491	!-- Start time for coupled runs, if independent precursor runs for atmosphere
[1106]	492	!-- and ocean are used or have been used. In this case, coupling_start_time
	493	!-- defines the time when the coupling is switched on.
[1353]	494	IF ( coupling_start_time /= 0.0_wp ) THEN
[1106]	495	WRITE ( io, 207 ) coupling_start_time
[291]	496	ENDIF
	497
	498	!
[1]	499	!-- Computational grid
[3294]	500	IF ( .NOT. ocean_mode ) THEN
[3065]	501	WRITE ( io, 250 ) dx, dy
	502
	503	DO i = 1, number_stretch_level_start+1
	504	WRITE ( io, 253 ) i, dz(i)
	505	ENDDO
	506
	507	WRITE( io, 251 ) (nx+1)dx, (ny+1)dy, zu(nzt+1)
	508
	509	IF ( ANY( dz_stretch_level_start_index < nzt+1 ) ) THEN
	510	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	511	DO i = 1, number_stretch_level_start
	512	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	513	ENDDO
	514	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	515	DO i = 1, number_stretch_level_start
	516	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	517	ENDDO
	518	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	519	DO i = 1, number_stretch_level_start
	520	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	521	ENDDO
	522	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	523	DO i = 1, number_stretch_level_start
	524	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	525	ENDDO
	526	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	527	DO i = 1, number_stretch_level_start
	528	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	529	ENDDO
[94]	530	ENDIF
[3065]	531
[94]	532	ELSE
[3065]	533	WRITE ( io, 250 ) dx, dy
	534	DO i = 1, number_stretch_level_start+1
	535	WRITE ( io, 253 ) i, dz(i)
	536	ENDDO
	537
	538	WRITE ( io, 251 ) (nx+1)dx, (ny+1)dy, zu(0)
	539
	540	IF ( ANY( dz_stretch_level_start_index > 0 ) ) THEN
	541	WRITE( io, '(A)', advance='no') ' Vertical stretching starts at height:'
	542	DO i = 1, number_stretch_level_start
	543	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_start(i), ' m,'
	544	ENDDO
	545	WRITE( io, '(/,A)', advance='no') ' Vertical stretching starts at index: '
	546	DO i = 1, number_stretch_level_start
	547	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_start_index(i), ','
	548	ENDDO
	549	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at height: '
	550	DO i = 1, number_stretch_level_start
	551	WRITE ( io, '(F10.1,A3)', advance='no' ) dz_stretch_level_end(i), ' m,'
	552	ENDDO
	553	WRITE( io, '(/,A)', advance='no') ' Vertical stretching ends at index: '
	554	DO i = 1, number_stretch_level_start
	555	WRITE ( io, '(I12,A1)', advance='no' ) dz_stretch_level_end_index(i), ','
	556	ENDDO
	557	WRITE( io, '(/,A)', advance='no') ' Factor used for stretching: '
	558	DO i = 1, number_stretch_level_start
	559	WRITE ( io, '(F12.3,A1)', advance='no' ) dz_stretch_factor_array(i), ','
	560	ENDDO
[94]	561	ENDIF
[1]	562	ENDIF
[3065]	563	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
[1]	564	MIN( nnz+2, nzt+2 )
	565	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	566
	567	!
[1365]	568	!-- Profile for the large scale vertial velocity
	569	!-- Building output strings, starting with surface value
	570	IF ( large_scale_subsidence ) THEN
	571	temperatures = ' 0.0'
	572	gradients = '------'
	573	slices = ' 0'
	574	coordinates = ' 0.0'
	575	i = 1
	576	DO WHILE ( subs_vertical_gradient_level_i(i) /= -9999 )
	577
	578	WRITE (coor_chr,'(E10.2,7X)') &
	579	w_subs(subs_vertical_gradient_level_i(i))
	580	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	581
	582	WRITE (coor_chr,'(E10.2,7X)') subs_vertical_gradient(i)
	583	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	584
	585	WRITE (coor_chr,'(I10,7X)') subs_vertical_gradient_level_i(i)
	586	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	587
	588	WRITE (coor_chr,'(F10.2,7X)') subs_vertical_gradient_level(i)
	589	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	590
	591	IF ( i == 10 ) THEN
	592	EXIT
	593	ELSE
	594	i = i + 1
	595	ENDIF
	596
	597	ENDDO
	598
	599
	600	IF ( .NOT. large_scale_forcing ) THEN
	601	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	602	TRIM( gradients ), TRIM( slices )
	603	ENDIF
	604
	605
	606	ENDIF
	607
	608	!-- Profile of the geostrophic wind (component ug)
	609	!-- Building output strings
	610	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	611	gradients = '------'
	612	slices = ' 0'
	613	coordinates = ' 0.0'
	614	i = 1
	615	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	616
	617	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
	618	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	619
	620	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
	621	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	622
	623	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
	624	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	625
	626	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
	627	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	628
	629	IF ( i == 10 ) THEN
	630	EXIT
	631	ELSE
	632	i = i + 1
	633	ENDIF
	634
	635	ENDDO
	636
	637	IF ( .NOT. large_scale_forcing ) THEN
	638	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	639	TRIM( gradients ), TRIM( slices )
	640	ENDIF
	641
	642	!-- Profile of the geostrophic wind (component vg)
	643	!-- Building output strings
	644	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	645	gradients = '------'
	646	slices = ' 0'
	647	coordinates = ' 0.0'
	648	i = 1
	649	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	650
	651	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
	652	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	653
	654	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
	655	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	656
	657	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
	658	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	659
	660	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
	661	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	662
	663	IF ( i == 10 ) THEN
	664	EXIT
	665	ELSE
	666	i = i + 1
	667	ENDIF
	668
	669	ENDDO
	670
	671	IF ( .NOT. large_scale_forcing ) THEN
	672	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	673	TRIM( gradients ), TRIM( slices )
	674	ENDIF
	675
	676	!
[1]	677	!-- Topography
	678	WRITE ( io, 270 ) topography
	679	SELECT CASE ( TRIM( topography ) )
	680
	681	CASE ( 'flat' )
	682	! no actions necessary
	683
	684	CASE ( 'single_building' )
	685	blx = INT( building_length_x / dx )
	686	bly = INT( building_length_y / dy )
[1675]	687	bh = MINLOC( ABS( zw - building_height ), 1 ) - 1
	688	IF ( ABS( zw(bh ) - building_height ) == &
	689	ABS( zw(bh+1) - building_height ) ) bh = bh + 1
[1]	690
[1322]	691	IF ( building_wall_left == 9999999.9_wp ) THEN
[1]	692	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	693	ENDIF
[1353]	694	bxl = INT ( building_wall_left / dx + 0.5_wp )
[1]	695	bxr = bxl + blx
	696
[1322]	697	IF ( building_wall_south == 9999999.9_wp ) THEN
[1]	698	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	699	ENDIF
[1353]	700	bys = INT ( building_wall_south / dy + 0.5_wp )
[1]	701	byn = bys + bly
	702
	703	WRITE ( io, 271 ) building_length_x, building_length_y, &
	704	building_height, bxl, bxr, bys, byn
	705
[240]	706	CASE ( 'single_street_canyon' )
[1675]	707	ch = MINLOC( ABS( zw - canyon_height ), 1 ) - 1
	708	IF ( ABS( zw(ch ) - canyon_height ) == &
	709	ABS( zw(ch+1) - canyon_height ) ) ch = ch + 1
[1322]	710	IF ( canyon_width_x /= 9999999.9_wp ) THEN
[240]	711	!
	712	!-- Street canyon in y direction
	713	cwx = NINT( canyon_width_x / dx )
[1322]	714	IF ( canyon_wall_left == 9999999.9_wp ) THEN
[240]	715	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	716	ENDIF
	717	cxl = NINT( canyon_wall_left / dx )
	718	cxr = cxl + cwx
	719	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	720
[1322]	721	ELSEIF ( canyon_width_y /= 9999999.9_wp ) THEN
[240]	722	!
	723	!-- Street canyon in x direction
	724	cwy = NINT( canyon_width_y / dy )
[1322]	725	IF ( canyon_wall_south == 9999999.9_wp ) THEN
[240]	726	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	727	ENDIF
	728	cys = NINT( canyon_wall_south / dy )
	729	cyn = cys + cwy
	730	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	731	ENDIF
	732
[2232]	733	CASE ( 'tunnel' )
	734	IF ( tunnel_width_x /= 9999999.9_wp ) THEN
	735	!
	736	!-- Tunnel axis in y direction
	737	IF ( tunnel_length == 9999999.9_wp .OR. &
	738	tunnel_length >= ( nx + 1 ) * dx ) THEN
	739	WRITE ( io, 273 ) 'y', tunnel_height, tunnel_wall_depth, &
	740	tunnel_width_x
	741	ELSE
	742	WRITE ( io, 274 ) 'y', tunnel_height, tunnel_wall_depth, &
	743	tunnel_width_x, tunnel_length
	744	ENDIF
	745
	746	ELSEIF ( tunnel_width_y /= 9999999.9_wp ) THEN
	747	!
	748	!-- Tunnel axis in x direction
	749	IF ( tunnel_length == 9999999.9_wp .OR. &
	750	tunnel_length >= ( ny + 1 ) * dy ) THEN
	751	WRITE ( io, 273 ) 'x', tunnel_height, tunnel_wall_depth, &
	752	tunnel_width_y
	753	ELSE
	754	WRITE ( io, 274 ) 'x', tunnel_height, tunnel_wall_depth, &
	755	tunnel_width_y, tunnel_length
	756	ENDIF
	757	ENDIF
	758
[1]	759	END SELECT
	760
[256]	761	IF ( TRIM( topography ) /= 'flat' ) THEN
	762	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	763	IF ( TRIM( topography ) == 'single_building' .OR. &
	764	TRIM( topography ) == 'single_street_canyon' ) THEN
	765	WRITE ( io, 278 )
	766	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	767	WRITE ( io, 279 )
	768	ENDIF
	769	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	770	WRITE ( io, 278 )
	771	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	772	WRITE ( io, 279 )
	773	ENDIF
	774	ENDIF
	775
[2550]	776	!-- Complex terrain
	777	IF ( complex_terrain ) THEN
	778	WRITE( io, 280 )
	779	IF ( turbulent_inflow ) THEN
[4168]	780	WRITE( io, 281 ) zu(topo_top_ind(0,0,0))
[2550]	781	ENDIF
	782	IF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	783	WRITE( io, 282 )
	784	ENDIF
	785	ENDIF
[3302]	786	!
[1]	787	!-- Boundary conditions
	788	IF ( ibc_p_b == 0 ) THEN
[1826]	789	r_lower = 'p(0) = 0 \|'
[1]	790	ELSEIF ( ibc_p_b == 1 ) THEN
[1826]	791	r_lower = 'p(0) = p(1) \|'
[1]	792	ENDIF
	793	IF ( ibc_p_t == 0 ) THEN
[1826]	794	r_upper = 'p(nzt+1) = 0 \|'
[1]	795	ELSE
[1826]	796	r_upper = 'p(nzt+1) = p(nzt) \|'
[1]	797	ENDIF
	798
	799	IF ( ibc_uv_b == 0 ) THEN
[1826]	800	r_lower = TRIM( r_lower ) // ' uv(0) = -uv(1) \|'
[1]	801	ELSE
[1826]	802	r_lower = TRIM( r_lower ) // ' uv(0) = uv(1) \|'
[1]	803	ENDIF
[132]	804	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
[1826]	805	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = 0 \|'
[132]	806	ELSEIF ( ibc_uv_t == 0 ) THEN
[1826]	807	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
[1]	808	ELSE
[1826]	809	r_upper = TRIM( r_upper ) // ' uv(nzt+1) = uv(nzt) \|'
[1]	810	ENDIF
	811
	812	IF ( ibc_pt_b == 0 ) THEN
[1551]	813	IF ( land_surface ) THEN
[1826]	814	r_lower = TRIM( r_lower ) // ' pt(0) = from soil model'
[1551]	815	ELSE
[1826]	816	r_lower = TRIM( r_lower ) // ' pt(0) = pt_surface'
[1551]	817	ENDIF
[102]	818	ELSEIF ( ibc_pt_b == 1 ) THEN
[1826]	819	r_lower = TRIM( r_lower ) // ' pt(0) = pt(1)'
[102]	820	ELSEIF ( ibc_pt_b == 2 ) THEN
[1826]	821	r_lower = TRIM( r_lower ) // ' pt(0) = from coupled model'
[1]	822	ENDIF
	823	IF ( ibc_pt_t == 0 ) THEN
[1826]	824	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt_top'
[19]	825	ELSEIF( ibc_pt_t == 1 ) THEN
[1826]	826	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt)'
[19]	827	ELSEIF( ibc_pt_t == 2 ) THEN
[1826]	828	r_upper = TRIM( r_upper ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[667]	829
[1]	830	ENDIF
	831
[1826]	832	WRITE ( io, 300 ) r_lower, r_upper
[1]	833
	834	IF ( .NOT. constant_diffusion ) THEN
	835	IF ( ibc_e_b == 1 ) THEN
[1826]	836	r_lower = 'e(0) = e(1)'
[1]	837	ELSE
[1826]	838	r_lower = 'e(0) = e(1) = (u/0.1)*2'
[1]	839	ENDIF
[1826]	840	r_upper = 'e(nzt+1) = e(nzt) = e(nzt-1)'
[1]	841
[1826]	842	WRITE ( io, 301 ) 'e', r_lower, r_upper
[1]	843
	844	ENDIF
	845
[3294]	846	IF ( ocean_mode ) THEN
[1826]	847	r_lower = 'sa(0) = sa(1)'
[97]	848	IF ( ibc_sa_t == 0 ) THEN
[1826]	849	r_upper = 'sa(nzt+1) = sa_surface'
[1]	850	ELSE
[1826]	851	r_upper = 'sa(nzt+1) = sa(nzt)'
[1]	852	ENDIF
[1826]	853	WRITE ( io, 301 ) 'sa', r_lower, r_upper
[97]	854	ENDIF
[1]	855
[97]	856	IF ( humidity ) THEN
	857	IF ( ibc_q_b == 0 ) THEN
[1551]	858	IF ( land_surface ) THEN
[1826]	859	r_lower = 'q(0) = from soil model'
[1551]	860	ELSE
[1826]	861	r_lower = 'q(0) = q_surface'
[1551]	862	ENDIF
	863
[97]	864	ELSE
[1992]	865	r_lower = 'q(0) = q(1)'
[97]	866	ENDIF
	867	IF ( ibc_q_t == 0 ) THEN
[1992]	868	r_upper = 'q(nzt+1) = q_top'
[97]	869	ELSE
[1992]	870	r_upper = 'q(nzt+1) = q(nzt) + dq/dz'
[97]	871	ENDIF
[1826]	872	WRITE ( io, 301 ) 'q', r_lower, r_upper
[97]	873	ENDIF
[1]	874
[97]	875	IF ( passive_scalar ) THEN
[1960]	876	IF ( ibc_s_b == 0 ) THEN
[1992]	877	r_lower = 's(0) = s_surface'
[97]	878	ELSE
[1992]	879	r_lower = 's(0) = s(1)'
[97]	880	ENDIF
[1960]	881	IF ( ibc_s_t == 0 ) THEN
[1992]	882	r_upper = 's(nzt+1) = s_top'
	883	ELSEIF ( ibc_s_t == 1 ) THEN
	884	r_upper = 's(nzt+1) = s(nzt)'
	885	ELSEIF ( ibc_s_t == 2 ) THEN
	886	r_upper = 's(nzt+1) = s(nzt) + ds/dz'
[97]	887	ENDIF
[1826]	888	WRITE ( io, 301 ) 's', r_lower, r_upper
[1]	889	ENDIF
	890
	891	IF ( use_surface_fluxes ) THEN
	892	WRITE ( io, 303 )
	893	IF ( constant_heatflux ) THEN
[1299]	894	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	895	IF ( surf_def_h(0)%ns >= 1 ) WRITE ( io, 306 ) surf_def_h(0)%shf(1)
[1241]	896	ELSE
	897	WRITE ( io, 306 ) surface_heatflux
	898	ENDIF
[1]	899	IF ( random_heatflux ) WRITE ( io, 307 )
	900	ENDIF
[75]	901	IF ( humidity .AND. constant_waterflux ) THEN
[1299]	902	IF ( large_scale_forcing .AND. lsf_surf ) THEN
[2232]	903	WRITE ( io, 311 ) surf_def_h(0)%qsws(1)
[1241]	904	ELSE
	905	WRITE ( io, 311 ) surface_waterflux
	906	ENDIF
[1]	907	ENDIF
[1960]	908	IF ( passive_scalar .AND. constant_scalarflux ) THEN
	909	WRITE ( io, 313 ) surface_scalarflux
[1]	910	ENDIF
	911	ENDIF
	912
[19]	913	IF ( use_top_fluxes ) THEN
	914	WRITE ( io, 304 )
[102]	915	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	916	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	917	IF ( constant_top_heatflux ) THEN
	918	WRITE ( io, 306 ) top_heatflux
	919	ENDIF
	920	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	921	WRITE ( io, 316 )
[19]	922	ENDIF
[3294]	923	IF ( ocean_mode .AND. constant_top_salinityflux ) &
[97]	924	WRITE ( io, 309 ) top_salinityflux
[1960]	925	IF ( humidity ) WRITE ( io, 315 )
[1992]	926	IF ( passive_scalar .AND. constant_top_scalarflux ) &
	927	WRITE ( io, 302 ) top_scalarflux
[19]	928	ENDIF
	929
[1691]	930	IF ( constant_flux_layer ) THEN
	931	WRITE ( io, 305 ) (zu(1)-zu(0)), roughness_length, &
	932	z0h_factor*roughness_length, kappa, &
	933	zeta_min, zeta_max
[1]	934	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	935	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	936	WRITE ( io, 312 )
	937	ENDIF
[1960]	938	IF ( passive_scalar .AND. .NOT. constant_scalarflux ) THEN
[1]	939	WRITE ( io, 314 )
	940	ENDIF
	941	ELSE
	942	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
[1691]	943	WRITE ( io, 310 ) zeta_min, zeta_max
[1]	944	ENDIF
	945	ENDIF
	946
	947	WRITE ( io, 317 ) bc_lr, bc_ns
[707]	948	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1159]	949	WRITE ( io, 318 ) use_cmax, pt_damping_width, pt_damping_factor
[151]	950	IF ( turbulent_inflow ) THEN
[4301]	951	IF ( y_shift == 0 ) THEN
[1560]	952	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	953	inflow_damping_height, inflow_damping_width
	954	ELSE
[4301]	955	WRITE ( io, 322 ) y_shift, recycling_width, recycling_plane, &
[1560]	956	inflow_damping_height, inflow_damping_width
	957	END IF
[151]	958	ENDIF
[2050]	959	IF ( turbulent_outflow ) THEN
	960	WRITE ( io, 323 ) outflow_source_plane, INT(outflow_source_plane/dx)
	961	ENDIF
[1]	962	ENDIF
	963
	964	!
[1365]	965	!-- Initial Profiles
	966	WRITE ( io, 321 )
	967	!
	968	!-- Initial wind profiles
	969	IF ( u_profile(1) /= 9999999.9_wp ) WRITE ( io, 427 )
	970
	971	!
	972	!-- Initial temperature profile
	973	!-- Building output strings, starting with surface temperature
	974	WRITE ( temperatures, '(F6.2)' ) pt_surface
	975	gradients = '------'
	976	slices = ' 0'
	977	coordinates = ' 0.0'
	978	i = 1
	979	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	980
	981	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	982	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	983
	984	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	985	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	986
	987	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	988	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	989
	990	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	991	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	992
	993	IF ( i == 10 ) THEN
	994	EXIT
	995	ELSE
	996	i = i + 1
	997	ENDIF
	998
	999	ENDDO
	1000
	1001	IF ( .NOT. nudging ) THEN
	1002	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1003	TRIM( gradients ), TRIM( slices )
	1004	ELSE
	1005	WRITE ( io, 428 )
	1006	ENDIF
	1007
	1008	!
	1009	!-- Initial humidity profile
	1010	!-- Building output strings, starting with surface humidity
[1960]	1011	IF ( humidity ) THEN
[1365]	1012	WRITE ( temperatures, '(E8.1)' ) q_surface
	1013	gradients = '--------'
	1014	slices = ' 0'
	1015	coordinates = ' 0.0'
	1016	i = 1
	1017	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1018
	1019	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1020	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1021
	1022	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1023	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1024
	1025	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1026	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1027
	1028	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1029	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1030
	1031	IF ( i == 10 ) THEN
	1032	EXIT
	1033	ELSE
	1034	i = i + 1
	1035	ENDIF
	1036
	1037	ENDDO
	1038
[1960]	1039	IF ( .NOT. nudging ) THEN
	1040	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
[1365]	1041	TRIM( gradients ), TRIM( slices )
	1042	ENDIF
	1043	ENDIF
[1960]	1044	!
	1045	!-- Initial scalar profile
	1046	!-- Building output strings, starting with surface humidity
	1047	IF ( passive_scalar ) THEN
	1048	WRITE ( temperatures, '(E8.1)' ) s_surface
	1049	gradients = '--------'
	1050	slices = ' 0'
	1051	coordinates = ' 0.0'
	1052	i = 1
	1053	DO WHILE ( s_vertical_gradient_level_ind(i) /= -9999 )
	1054
[2073]	1055	WRITE (coor_chr,'(E8.1,4X)') s_init(s_vertical_gradient_level_ind(i))
[1960]	1056	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1365]	1057
[1960]	1058	WRITE (coor_chr,'(E8.1,4X)') s_vertical_gradient(i)
	1059	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1060
	1061	WRITE (coor_chr,'(I8,4X)') s_vertical_gradient_level_ind(i)
	1062	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1063
	1064	WRITE (coor_chr,'(F8.1,4X)') s_vertical_gradient_level(i)
	1065	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1066
	1067	IF ( i == 10 ) THEN
	1068	EXIT
	1069	ELSE
	1070	i = i + 1
	1071	ENDIF
	1072
	1073	ENDDO
	1074
	1075	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1076	TRIM( gradients ), TRIM( slices )
	1077	ENDIF
	1078
[1365]	1079	!
	1080	!-- Initial salinity profile
	1081	!-- Building output strings, starting with surface salinity
[3294]	1082	IF ( ocean_mode ) THEN
[1365]	1083	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1084	gradients = '------'
	1085	slices = ' 0'
	1086	coordinates = ' 0.0'
	1087	i = 1
	1088	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1089
	1090	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1091	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1092
	1093	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1094	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1095
	1096	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1097	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1098
	1099	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1100	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1101
	1102	IF ( i == 10 ) THEN
	1103	EXIT
	1104	ELSE
	1105	i = i + 1
	1106	ENDIF
	1107
	1108	ENDDO
	1109
	1110	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1111	TRIM( gradients ), TRIM( slices )
	1112	ENDIF
	1113
	1114
	1115	!
[1]	1116	!-- Listing of 1D-profiles
[151]	1117	WRITE ( io, 325 ) dt_dopr_listing
[1353]	1118	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1119	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1120	ENDIF
	1121
	1122	!
	1123	!-- DATA output
	1124	WRITE ( io, 330 )
[1353]	1125	IF ( averaging_interval_pr /= 0.0_wp ) THEN
[151]	1126	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	1127	ENDIF
	1128
	1129	!
	1130	!-- 1D-profiles
[346]	1131	dopr_chr = 'Profile:'
[1]	1132	IF ( dopr_n /= 0 ) THEN
	1133	WRITE ( io, 331 )
	1134
	1135	output_format = ''
[1783]	1136	output_format = netcdf_data_format_string
	1137	IF ( netcdf_deflate == 0 ) THEN
	1138	WRITE ( io, 344 ) output_format
	1139	ELSE
	1140	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1141	ENDIF
[1]	1142
	1143	DO i = 1, dopr_n
	1144	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	1145	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	1146	WRITE ( io, 332 ) dopr_chr
	1147	dopr_chr = ' :'
	1148	ENDIF
	1149	ENDDO
	1150
	1151	IF ( dopr_chr /= '' ) THEN
	1152	WRITE ( io, 332 ) dopr_chr
	1153	ENDIF
	1154	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
[1353]	1155	IF ( skip_time_dopr /= 0.0_wp ) WRITE ( io, 339 ) skip_time_dopr
[1]	1156	ENDIF
	1157
	1158	!
	1159	!-- 2D-arrays
	1160	DO av = 0, 1
	1161
	1162	i = 1
	1163	do2d_xy = ''
	1164	do2d_xz = ''
	1165	do2d_yz = ''
	1166	DO WHILE ( do2d(av,i) /= ' ' )
	1167
	1168	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	1169	do2d_mode = do2d(av,i)(l-1:l)
	1170
	1171	SELECT CASE ( do2d_mode )
	1172	CASE ( 'xy' )
	1173	ll = LEN_TRIM( do2d_xy )
	1174	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1175	CASE ( 'xz' )
	1176	ll = LEN_TRIM( do2d_xz )
	1177	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1178	CASE ( 'yz' )
	1179	ll = LEN_TRIM( do2d_yz )
	1180	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	1181	END SELECT
	1182
	1183	i = i + 1
	1184
	1185	ENDDO
	1186
	1187	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	1188	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
[1327]	1189	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) ) THEN
[1]	1190
	1191	IF ( av == 0 ) THEN
	1192	WRITE ( io, 334 ) ''
	1193	ELSE
	1194	WRITE ( io, 334 ) '(time-averaged)'
	1195	ENDIF
	1196
	1197	IF ( do2d_at_begin ) THEN
	1198	begin_chr = 'and at the start'
	1199	ELSE
	1200	begin_chr = ''
	1201	ENDIF
	1202
	1203	output_format = ''
[1783]	1204	output_format = netcdf_data_format_string
	1205	IF ( netcdf_deflate == 0 ) THEN
	1206	WRITE ( io, 344 ) output_format
	1207	ELSE
	1208	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1209	ENDIF
[1]	1210
	1211	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	1212	i = 1
	1213	slices = '/'
	1214	coordinates = '/'
	1215	!
[1551]	1216	!-- Building strings with index and coordinate information of the
[1]	1217	!-- slices
	1218	DO WHILE ( section(i,1) /= -9999 )
	1219
	1220	WRITE (section_chr,'(I5)') section(i,1)
	1221	section_chr = ADJUSTL( section_chr )
	1222	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1223
[206]	1224	IF ( section(i,1) == -1 ) THEN
[1353]	1225	WRITE (coor_chr,'(F10.1)') -1.0_wp
[206]	1226	ELSE
	1227	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	1228	ENDIF
[1]	1229	coor_chr = ADJUSTL( coor_chr )
	1230	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1231
	1232	i = i + 1
	1233	ENDDO
	1234	IF ( av == 0 ) THEN
	1235	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	1236	TRIM( begin_chr ), 'k', TRIM( slices ), &
	1237	TRIM( coordinates )
[1353]	1238	IF ( skip_time_do2d_xy /= 0.0_wp ) THEN
[1]	1239	WRITE ( io, 339 ) skip_time_do2d_xy
	1240	ENDIF
	1241	ELSE
	1242	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	1243	TRIM( begin_chr ), averaging_interval, &
	1244	dt_averaging_input, 'k', TRIM( slices ), &
	1245	TRIM( coordinates )
[1353]	1246	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1247	WRITE ( io, 339 ) skip_time_data_output_av
	1248	ENDIF
	1249	ENDIF
[1308]	1250	IF ( netcdf_data_format > 4 ) THEN
	1251	WRITE ( io, 352 ) ntdim_2d_xy(av)
	1252	ELSE
	1253	WRITE ( io, 353 )
	1254	ENDIF
[1]	1255	ENDIF
	1256
	1257	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	1258	i = 1
	1259	slices = '/'
	1260	coordinates = '/'
	1261	!
[1551]	1262	!-- Building strings with index and coordinate information of the
[1]	1263	!-- slices
	1264	DO WHILE ( section(i,2) /= -9999 )
	1265
	1266	WRITE (section_chr,'(I5)') section(i,2)
	1267	section_chr = ADJUSTL( section_chr )
	1268	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1269
	1270	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	1271	coor_chr = ADJUSTL( coor_chr )
	1272	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1273
	1274	i = i + 1
	1275	ENDDO
	1276	IF ( av == 0 ) THEN
	1277	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	1278	TRIM( begin_chr ), 'j', TRIM( slices ), &
	1279	TRIM( coordinates )
[1353]	1280	IF ( skip_time_do2d_xz /= 0.0_wp ) THEN
[1]	1281	WRITE ( io, 339 ) skip_time_do2d_xz
	1282	ENDIF
	1283	ELSE
	1284	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	1285	TRIM( begin_chr ), averaging_interval, &
	1286	dt_averaging_input, 'j', TRIM( slices ), &
	1287	TRIM( coordinates )
[1353]	1288	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1289	WRITE ( io, 339 ) skip_time_data_output_av
	1290	ENDIF
	1291	ENDIF
[1308]	1292	IF ( netcdf_data_format > 4 ) THEN
	1293	WRITE ( io, 352 ) ntdim_2d_xz(av)
	1294	ELSE
	1295	WRITE ( io, 353 )
	1296	ENDIF
[1]	1297	ENDIF
	1298
	1299	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	1300	i = 1
	1301	slices = '/'
	1302	coordinates = '/'
	1303	!
[1551]	1304	!-- Building strings with index and coordinate information of the
[1]	1305	!-- slices
	1306	DO WHILE ( section(i,3) /= -9999 )
	1307
	1308	WRITE (section_chr,'(I5)') section(i,3)
	1309	section_chr = ADJUSTL( section_chr )
	1310	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	1311
	1312	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	1313	coor_chr = ADJUSTL( coor_chr )
	1314	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	1315
	1316	i = i + 1
	1317	ENDDO
	1318	IF ( av == 0 ) THEN
	1319	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	1320	TRIM( begin_chr ), 'i', TRIM( slices ), &
	1321	TRIM( coordinates )
[1353]	1322	IF ( skip_time_do2d_yz /= 0.0_wp ) THEN
[1]	1323	WRITE ( io, 339 ) skip_time_do2d_yz
	1324	ENDIF
	1325	ELSE
	1326	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	1327	TRIM( begin_chr ), averaging_interval, &
	1328	dt_averaging_input, 'i', TRIM( slices ), &
	1329	TRIM( coordinates )
[1353]	1330	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1331	WRITE ( io, 339 ) skip_time_data_output_av
	1332	ENDIF
	1333	ENDIF
[1308]	1334	IF ( netcdf_data_format > 4 ) THEN
	1335	WRITE ( io, 352 ) ntdim_2d_yz(av)
	1336	ELSE
	1337	WRITE ( io, 353 )
	1338	ENDIF
[1]	1339	ENDIF
	1340
	1341	ENDIF
	1342
	1343	ENDDO
	1344
	1345	!
	1346	!-- 3d-arrays
	1347	DO av = 0, 1
	1348
	1349	i = 1
	1350	do3d_chr = ''
	1351	DO WHILE ( do3d(av,i) /= ' ' )
	1352
	1353	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	1354	i = i + 1
	1355
	1356	ENDDO
	1357
	1358	IF ( do3d_chr /= '' ) THEN
	1359	IF ( av == 0 ) THEN
	1360	WRITE ( io, 336 ) ''
	1361	ELSE
	1362	WRITE ( io, 336 ) '(time-averaged)'
	1363	ENDIF
	1364
[1783]	1365	output_format = netcdf_data_format_string
	1366	IF ( netcdf_deflate == 0 ) THEN
	1367	WRITE ( io, 344 ) output_format
	1368	ELSE
	1369	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1370	ENDIF
[1]	1371
	1372	IF ( do3d_at_begin ) THEN
	1373	begin_chr = 'and at the start'
	1374	ELSE
	1375	begin_chr = ''
	1376	ENDIF
	1377	IF ( av == 0 ) THEN
	1378	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	1379	zu(nz_do3d), nz_do3d
	1380	ELSE
	1381	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	1382	TRIM( begin_chr ), averaging_interval, &
	1383	dt_averaging_input, zu(nz_do3d), nz_do3d
	1384	ENDIF
	1385
[1308]	1386	IF ( netcdf_data_format > 4 ) THEN
	1387	WRITE ( io, 352 ) ntdim_3d(av)
	1388	ELSE
	1389	WRITE ( io, 353 )
	1390	ENDIF
	1391
[1]	1392	IF ( av == 0 ) THEN
[1353]	1393	IF ( skip_time_do3d /= 0.0_wp ) THEN
[1]	1394	WRITE ( io, 339 ) skip_time_do3d
	1395	ENDIF
	1396	ELSE
[1353]	1397	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[1]	1398	WRITE ( io, 339 ) skip_time_data_output_av
	1399	ENDIF
	1400	ENDIF
	1401
	1402	ENDIF
	1403
	1404	ENDDO
	1405
	1406	!
[410]	1407	!-- masked arrays
	1408	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1409	mask_scale_x, mask_scale_y, mask_scale_z
	1410	DO mid = 1, masks
	1411	DO av = 0, 1
	1412
	1413	i = 1
	1414	domask_chr = ''
	1415	DO WHILE ( domask(mid,av,i) /= ' ' )
	1416	domask_chr = TRIM( domask_chr ) // ' ' // &
	1417	TRIM( domask(mid,av,i) ) // ','
	1418	i = i + 1
	1419	ENDDO
	1420
	1421	IF ( domask_chr /= '' ) THEN
	1422	IF ( av == 0 ) THEN
	1423	WRITE ( io, 346 ) '', mid
	1424	ELSE
	1425	WRITE ( io, 346 ) ' (time-averaged)', mid
	1426	ENDIF
	1427
[1783]	1428	output_format = netcdf_data_format_string
[1308]	1429	!-- Parallel output not implemented for mask data, hence
	1430	!-- output_format must be adjusted.
	1431	IF ( netcdf_data_format == 5 ) output_format = 'netCDF4/HDF5'
	1432	IF ( netcdf_data_format == 6 ) output_format = 'netCDF4/HDF5 classic'
[1783]	1433	IF ( netcdf_deflate == 0 ) THEN
	1434	WRITE ( io, 344 ) output_format
	1435	ELSE
	1436	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1437	ENDIF
[410]	1438
	1439	IF ( av == 0 ) THEN
	1440	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1441	ELSE
	1442	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1443	averaging_interval, dt_averaging_input
	1444	ENDIF
	1445
	1446	IF ( av == 0 ) THEN
[1353]	1447	IF ( skip_time_domask(mid) /= 0.0_wp ) THEN
[410]	1448	WRITE ( io, 339 ) skip_time_domask(mid)
	1449	ENDIF
	1450	ELSE
[1353]	1451	IF ( skip_time_data_output_av /= 0.0_wp ) THEN
[410]	1452	WRITE ( io, 339 ) skip_time_data_output_av
	1453	ENDIF
	1454	ENDIF
	1455	!
	1456	!-- output locations
	1457	DO dim = 1, 3
[1353]	1458	IF ( mask(mid,dim,1) >= 0.0_wp ) THEN
[410]	1459	count = 0
[1353]	1460	DO WHILE ( mask(mid,dim,count+1) >= 0.0_wp )
[410]	1461	count = count + 1
	1462	ENDDO
	1463	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1464	mask(mid,dim,:count)
[1353]	1465	ELSEIF ( mask_loop(mid,dim,1) < 0.0_wp .AND. &
	1466	mask_loop(mid,dim,2) < 0.0_wp .AND. &
	1467	mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1468	WRITE ( io, 350 ) dir(dim), dir(dim)
[1353]	1469	ELSEIF ( mask_loop(mid,dim,3) == 0.0_wp ) THEN
[410]	1470	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1471	mask_loop(mid,dim,1:2)
	1472	ELSE
	1473	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1474	mask_loop(mid,dim,1:3)
	1475	ENDIF
	1476	ENDDO
	1477	ENDIF
	1478
	1479	ENDDO
	1480	ENDDO
	1481
	1482	!
[1]	1483	!-- Timeseries
[1322]	1484	IF ( dt_dots /= 9999999.9_wp ) THEN
[1]	1485	WRITE ( io, 340 )
	1486
[1783]	1487	output_format = netcdf_data_format_string
	1488	IF ( netcdf_deflate == 0 ) THEN
	1489	WRITE ( io, 344 ) output_format
	1490	ELSE
	1491	WRITE ( io, 354 ) TRIM( output_format ), netcdf_deflate
	1492	ENDIF
[1]	1493	WRITE ( io, 341 ) dt_dots
	1494	ENDIF
	1495
	1496	WRITE ( io, 99 )
	1497
	1498	!
	1499	!-- Physical quantities
	1500	WRITE ( io, 400 )
	1501
	1502	!
	1503	!-- Geostrophic parameters
[4196]	1504	WRITE ( io, 410 ) latitude, longitude, rotation_angle, omega, f, fs
[1]	1505
[3241]	1506	!
[4227]	1507	!-- Day and time during model start
	1508	CALL get_date_time( 0.0_wp, date_time_str=date_time_str )
	1509	WRITE ( io, 456 ) TRIM( date_time_str )
	1510
[1]	1511	!
	1512	!-- Other quantities
	1513	WRITE ( io, 411 ) g
[1551]	1514
[1179]	1515	WRITE ( io, 412 ) TRIM( reference_state )
	1516	IF ( use_single_reference_value ) THEN
[3294]	1517	IF ( ocean_mode ) THEN
[1179]	1518	WRITE ( io, 413 ) prho_reference
[97]	1519	ELSE
[1179]	1520	WRITE ( io, 414 ) pt_reference
[97]	1521	ENDIF
	1522	ENDIF
[1]	1523
	1524	!
[824]	1525	!-- Cloud physcis parameters / quantities / numerical methods
	1526	WRITE ( io, 430 )
[3274]	1527	IF ( humidity .AND. .NOT. bulk_cloud_model .AND. .NOT. cloud_droplets) THEN
[824]	1528	WRITE ( io, 431 )
[3274]	1529	ENDIF
[824]	1530	!
[1]	1531	!-- LES / turbulence parameters
	1532	WRITE ( io, 450 )
	1533
	1534	!--
	1535	! ... LES-constants used must still be added here
	1536	!--
	1537	IF ( constant_diffusion ) THEN
	1538	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1539	prandtl_number
	1540	ENDIF
	1541	IF ( .NOT. constant_diffusion) THEN
[1353]	1542	IF ( e_init > 0.0_wp ) WRITE ( io, 455 ) e_init
	1543	IF ( e_min > 0.0_wp ) WRITE ( io, 454 ) e_min
[4473]	1544	IF ( wall_adjustment ) WRITE ( io, 453 )
[1]	1545	ENDIF
[3083]	1546	IF ( rans_mode ) THEN
	1547	WRITE ( io, 457 ) rans_const_c, rans_const_sigma
	1548	ENDIF
[1]	1549	!
	1550	!-- Special actions during the run
	1551	WRITE ( io, 470 )
	1552	IF ( create_disturbances ) THEN
	1553	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1554	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1555	zu(disturbance_level_ind_t), disturbance_level_ind_t
[707]	1556	IF ( .NOT. bc_lr_cyc .OR. .NOT. bc_ns_cyc ) THEN
[1]	1557	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1558	ELSE
	1559	WRITE ( io, 473 ) disturbance_energy_limit
	1560	ENDIF
	1561	WRITE ( io, 474 ) TRIM( random_generator )
	1562	ENDIF
[1353]	1563	IF ( pt_surface_initial_change /= 0.0_wp ) THEN
[1]	1564	WRITE ( io, 475 ) pt_surface_initial_change
	1565	ENDIF
[1353]	1566	IF ( humidity .AND. q_surface_initial_change /= 0.0_wp ) THEN
[1]	1567	WRITE ( io, 476 ) q_surface_initial_change
	1568	ENDIF
[1353]	1569	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0_wp ) THEN
[1]	1570	WRITE ( io, 477 ) q_surface_initial_change
	1571	ENDIF
	1572
	1573	!
	1574	!-- Parameters of 1D-model
	1575	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1576	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1577	mixing_length_1d, dissipation_1d
	1578	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1579	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1580	ENDIF
	1581	ENDIF
	1582
	1583	!
[3637]	1584	!-- Header information from other modules
	1585	CALL module_interface_header( io )
[1]	1586
[3637]	1587
[1]	1588	WRITE ( io, 99 )
	1589
	1590	!
	1591	!-- Write buffer contents to disc immediately
[1808]	1592	FLUSH( io )
[1]	1593
	1594	!
	1595	!-- Here the FORMATs start
	1596
	1597	99 FORMAT (1X,78('-'))
[1468]	1598	100 FORMAT (/1X,'******************************',4X,44('-')/ &
	1599	1X,'* ',A,' *',4X,A/ &
	1600	1X,'******************************',4X,44('-'))
[2298]	1601	101 FORMAT (35X,'coupled run: ',A/ &
[1468]	1602	35X,42('-'))
[3529]	1603	102 FORMAT (/' Date: ',A10,4X,'Run: ',A34/ &
[1468]	1604	' Time: ',A8,4X,'Run-No.: ',I2.2/ &
[1106]	1605	' Run on host: ',A10)
[1]	1606	#if defined( __parallel )
[1468]	1607	103 FORMAT (' Number of PEs:',10X,I6,4X,'Processor grid (x,y): (',I4,',',I4, &
[1]	1608	')',1X,A)
[1468]	1609	104 FORMAT (' Number of PEs:',10X,I6,4X,'Tasks:',I4,' threads per task:',I4/ &
	1610	35X,'Processor grid (x,y): (',I4,',',I4,')',1X,A)
	1611	107 FORMAT (35X,'A 1d-decomposition along ',A,' is used')
	1612	108 FORMAT (35X,'Max. # of parallel I/O streams is ',I5)
	1613	109 FORMAT (35X,'Precursor run for coupled atmos-ocean run'/ &
	1614	35X,42('-'))
	1615	114 FORMAT (35X,'Coupled atmosphere-ocean run following'/ &
	1616	35X,'independent precursor runs'/ &
	1617	35X,42('-'))
[1]	1618	#endif
	1619	110 FORMAT (/' Numerical Schemes:'/ &
	1620	' -----------------'/)
[2696]	1621	124 FORMAT (' --> Use the ',A,' turbulence closure (',A,' mode).')
[2037]	1622	121 FORMAT (' --> Use the ',A,' approximation for the model equations.')
[1]	1623	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1624	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
[1697]	1625	' Iterations (initial/other): ',I3,'/',I3,' omega =',F6.3)
[1]	1626	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1627	' or Upstream')
[1216]	1628	115 FORMAT (' FFT and transpositions are overlapping')
[1]	1629	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1630	' or Upstream')
	1631	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
[1106]	1632	119 FORMAT (' --> Galilei-Transform applied to horizontal advection:'/ &
	1633	' translation velocity = ',A/ &
[1]	1634	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1635	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1636	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1697]	1637	' maximum damping coefficient:',F6.3, ' 1/s')
[1]	1638	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1639	130 FORMAT (' --> Additional prognostic equation for the total water content')
[940]	1640	131 FORMAT (' --> No pt-equation solved. Neutral stratification with pt = ', &
	1641	F6.2, ' K assumed')
[1]	1642	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
[1575]	1643	135 FORMAT (' --> Solve perturbation pressure via ',A,' method (', &
[1]	1644	A,'-cycle)'/ &
	1645	' number of grid levels: ',I2/ &
	1646	' Gauss-Seidel red/black iterations: ',I2)
	1647	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1648	I3,')')
	1649	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1650	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1651	I3,')'/ &
	1652	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1653	I3,')')
[63]	1654	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1655	140 FORMAT (' maximum residual allowed: ',E10.3)
	1656	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1657	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1658	'step')
[87]	1659	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1660	'kinetic energy')
[927]	1661	144 FORMAT (' masking method is used')
[1]	1662	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1663	'conserved'/ &
	1664	' using the ',A,' mode')
	1665	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1666	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1667	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1668	/' starting from dp_level_b =', F8.3, 'm', A /)
[1]	1669	200 FORMAT (//' Run time and time step information:'/ &
	1670	' ----------------------------------'/)
[1106]	1671	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
[1697]	1672	' CFL-factor:',F5.2)
[1106]	1673	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
[4300]	1674	203 FORMAT ( ' Start time: ',F11.3,' s'/ &
	1675	' End time: ',F11.3,' s')
	1676	204 FORMAT ( A,F11.3,' s')
	1677	205 FORMAT ( A,F11.3,' s',5X,'restart every',17X,F11.3,' s')
	1678	206 FORMAT (/' Time reached: ',F11.3,' s'/ &
	1679	' CPU-time used: ',F9.3,' s per timestep: ',F9.3,' s'/ &
	1680	' per second of simulated time: ',F9.3,' s')
	1681	207 FORMAT ( ' Spinup time: ',F11.3,' s')
[1]	1682	250 FORMAT (//' Computational grid and domain size:'/ &
	1683	' ----------------------------------'// &
[3065]	1684	' Grid length: dx = ',F8.3,' m dy = ',F8.3, ' m')
	1685	251 FORMAT ( /' Domain size: x = ',F10.3,' m y = ',F10.3, &
[1]	1686	' m z(u) = ',F10.3,' m'/)
[3065]	1687	253 FORMAT ( ' dz(',I1,') = ', F8.3, ' m')
	1688	254 FORMAT (//' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
[1]	1689	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1690	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1691	' degrees')
[1551]	1692	270 FORMAT (//' Topography information:'/ &
	1693	' ----------------------'// &
[1]	1694	1X,'Topography: ',A)
	1695	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1696	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1697	' / ',I4)
[240]	1698	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1699	' direction' / &
	1700	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1701	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[2232]	1702	273 FORMAT ( ' Tunnel of infinite length in ',A, &
	1703	' direction' / &
	1704	' Tunnel height: ', F6.2, / &
	1705	' Tunnel-wall depth: ', F6.2 / &
	1706	' Tunnel width: ', F6.2 )
	1707	274 FORMAT ( ' Tunnel in ', A, ' direction.' / &
	1708	' Tunnel height: ', F6.2, / &
	1709	' Tunnel-wall depth: ', F6.2 / &
	1710	' Tunnel width: ', F6.2, / &
	1711	' Tunnel length: ', F6.2 )
[256]	1712	278 FORMAT (' Topography grid definition convention:'/ &
	1713	' cell edge (staggered grid points'/ &
	1714	' (u in x-direction, v in y-direction))' /)
	1715	279 FORMAT (' Topography grid definition convention:'/ &
	1716	' cell center (scalar grid points)' /)
[2550]	1717	280 FORMAT (' Complex terrain simulation is activated.')
	1718	281 FORMAT (' --> Mean inflow profiles are adjusted.' / &
	1719	' --> Elevation of inflow boundary: ', F7.1, ' m' )
	1720	282 FORMAT (' --> Initial data from 3D-precursor run is shifted' / &
	1721	' vertically depending on local surface height.')
[1]	1722	300 FORMAT (//' Boundary conditions:'/ &
	1723	' -------------------'// &
	1724	' p uv ', &
[1551]	1725	' pt'// &
[1]	1726	' B. bound.: ',A/ &
	1727	' T. bound.: ',A)
[97]	1728	301 FORMAT (/' ',A// &
[1]	1729	' B. bound.: ',A/ &
	1730	' T. bound.: ',A)
[19]	1731	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1732	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
[2270]	1733	305 FORMAT (//' Constant flux layer between bottom surface and first ', &
	1734	'computational u,v-level:'// &
	1735	' z_mo = ',F6.2,' m z0 =',F7.4,' m z0h =',F8.5,&
[1697]	1736	' m kappa =',F5.2/ &
	1737	' Rif value range: ',F8.2,' <= rif <=',F6.2)
[97]	1738	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1739	307 FORMAT (' Heatflux has a random normal distribution')
	1740	308 FORMAT (' Predefined surface temperature')
[97]	1741	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1742	310 FORMAT (//' 1D-Model:'// &
	1743	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[1960]	1744	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' kg/kg m/s')
[1]	1745	312 FORMAT (' Predefined surface humidity')
	1746	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1747	314 FORMAT (' Predefined scalar value at the surface')
[1992]	1748	302 FORMAT (' Predefined constant scalarflux: ',F9.6,' kg/(m**2 s)')
	1749	315 FORMAT (' Humidity flux at top surface is 0.0')
[102]	1750	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1751	'atmosphere model')
[1]	1752	317 FORMAT (//' Lateral boundaries:'/ &
	1753	' left/right: ',A/ &
	1754	' north/south: ',A)
[1159]	1755	318 FORMAT (/' use_cmax: ',L1 / &
	1756	' pt damping layer width = ',F8.2,' m, pt ', &
[1697]	1757	'damping factor =',F7.4)
[151]	1758	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1759	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1760	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1761	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1762	' v: ',F9.6,' m2/s2')
[1365]	1763	321 FORMAT (//' Initial profiles:'/ &
	1764	' ----------------')
[1560]	1765	322 FORMAT (' turbulence recycling at inflow switched on'/ &
[4301]	1766	' y-shift of the recycled inflow turbulence is',I3,' PE'/ &
[1560]	1767	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
[1592]	1768	' inflow damping height: ',F6.1,' m width: ',F6.1,' m'/)
[2050]	1769	323 FORMAT (' turbulent outflow conditon switched on'/ &
	1770	' position of outflow source plane: ',F7.1,' m ', &
	1771	'grid index: ', I4)
[151]	1772	325 FORMAT (//' List output:'/ &
[1]	1773	' -----------'// &
	1774	' 1D-Profiles:'/ &
[2883]	1775	' Output every ',F10.2,' s')
[151]	1776	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1777	' Averaging input every ',F8.2,' s')
	1778	330 FORMAT (//' Data output:'/ &
	1779	' -----------'/)
	1780	331 FORMAT (/' 1D-Profiles:')
	1781	332 FORMAT (/' ',A)
	1782	333 FORMAT (' Output every ',F8.2,' s',/ &
	1783	' Time averaged over ',F8.2,' s'/ &
	1784	' Averaging input every ',F8.2,' s')
	1785	334 FORMAT (/' 2D-Arrays',A,':')
	1786	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1787	' Output every ',F8.2,' s ',A/ &
	1788	' Cross sections at ',A1,' = ',A/ &
	1789	' scalar-coordinates: ',A,' m'/)
	1790	336 FORMAT (/' 3D-Arrays',A,':')
	1791	337 FORMAT (/' Arrays: ',A/ &
	1792	' Output every ',F8.2,' s ',A/ &
	1793	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1794	339 FORMAT (' No output during initial ',F8.2,' s')
	1795	340 FORMAT (/' Time series:')
	1796	341 FORMAT (' Output every ',F8.2,' s'/)
	1797	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1798	' Output every ',F8.2,' s ',A/ &
	1799	' Time averaged over ',F8.2,' s'/ &
	1800	' Averaging input every ',F8.2,' s'/ &
	1801	' Cross sections at ',A1,' = ',A/ &
	1802	' scalar-coordinates: ',A,' m'/)
	1803	343 FORMAT (/' Arrays: ',A/ &
	1804	' Output every ',F8.2,' s ',A/ &
	1805	' Time averaged over ',F8.2,' s'/ &
	1806	' Averaging input every ',F8.2,' s'/ &
	1807	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1808	344 FORMAT (' Output format: ',A/)
[410]	1809	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1810	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1811	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1812	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1813	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1814	347 FORMAT (' Variables: ',A/ &
	1815	' Output every ',F8.2,' s')
	1816	348 FORMAT (' Variables: ',A/ &
	1817	' Output every ',F8.2,' s'/ &
	1818	' Time averaged over ',F8.2,' s'/ &
	1819	' Averaging input every ',F8.2,' s')
	1820	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1821	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1822	13(' ',8(F8.2,',')/) )
	1823	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1824	'all gridpoints along ',A,'-direction (default).' )
	1825	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1826	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1827	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1313]	1828	352 FORMAT (/' Number of output time levels allowed: ',I3 /)
	1829	353 FORMAT (/' Number of output time levels allowed: unlimited' /)
[1783]	1830	354 FORMAT (' Output format: ',A, ' compressed with level: ',I1/)
[1]	1831	400 FORMAT (//' Physical quantities:'/ &
	1832	' -------------------'/)
[4196]	1833	410 FORMAT (' Geograph. latitude : latitude = ',F5.1,' degr'/ &
	1834	' Geograph. longitude : longitude = ',F5.1,' degr'/ &
	1835	' Rotation angle : rotation_angle = ',F5.1,' degr'/ &
[1697]	1836	' Angular velocity : omega =',E10.3,' rad/s'/ &
[1551]	1837	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1838	' f* = ',F9.6,' 1/s')
	1839	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[1179]	1840	412 FORMAT (/' Reference state used in buoyancy terms: ',A)
	1841	413 FORMAT (' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1842	414 FORMAT (' Reference temperature in buoyancy terms: ',F8.4,' K')
[1]	1843	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1844	' Height: ',A,' m'/ &
	1845	' Temperature: ',A,' K'/ &
	1846	' Gradient: ',A,' K/100m'/ &
	1847	' Gridpoint: ',A)
	1848	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1849	' Height: ',A,' m'/ &
	1850	' Humidity: ',A,' kg/kg'/ &
	1851	' Gradient: ',A,' (kg/kg)/100m'/ &
	1852	' Gridpoint: ',A)
	1853	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1854	' Height: ',A,' m'/ &
	1855	' Scalar concentration: ',A,' kg/m**3'/ &
	1856	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1857	' Gridpoint: ',A)
	1858	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1859	' Height: ',A,' m'/ &
	1860	' ug: ',A,' m/s'/ &
	1861	' Gradient: ',A,' 1/100s'/ &
	1862	' Gridpoint: ',A)
	1863	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1864	' Height: ',A,' m'/ &
[97]	1865	' vg: ',A,' m/s'/ &
[1]	1866	' Gradient: ',A,' 1/100s'/ &
	1867	' Gridpoint: ',A)
[97]	1868	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1869	' Height: ',A,' m'/ &
	1870	' Salinity: ',A,' psu'/ &
	1871	' Gradient: ',A,' psu/100m'/ &
	1872	' Gridpoint: ',A)
[411]	1873	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1874	' Height: ',A,' m'/ &
	1875	' w_subs: ',A,' m/s'/ &
	1876	' Gradient: ',A,' (m/s)/100m'/ &
	1877	' Gridpoint: ',A)
[767]	1878	427 FORMAT (/' Initial wind profiles (u,v) are interpolated from given'// &
	1879	' profiles')
[1241]	1880	428 FORMAT (/' Initial profiles (u, v, pt, q) are taken from file '/ &
	1881	' NUDGING_DATA')
[824]	1882	430 FORMAT (//' Cloud physics quantities / methods:'/ &
	1883	' ----------------------------------'/)
[1960]	1884	431 FORMAT (' Humidity is considered, bu no condensation')
[1]	1885	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1886	' ---------------------------'/)
[824]	1887	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1888	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
[4473]	1889	453 FORMAT (' Mixing length is limited close to surfaces')
[824]	1890	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
	1891	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[4227]	1892	456 FORMAT (/' Date and time at model start : ',A)
[3083]	1893	457 FORMAT (' RANS-mode constants: c_0 = ',F9.5/ &
	1894	' c_1 = ',F9.5/ &
	1895	' c_2 = ',F9.5/ &
	1896	' c_3 = ',F9.5/ &
	1897	' c_4 = ',F9.5/ &
	1898	' sigma_e = ',F9.5/ &
	1899	' sigma_diss = ',F9.5)
[1]	1900	470 FORMAT (//' Actions during the simulation:'/ &
	1901	' -----------------------------'/)
[94]	1902	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
[1697]	1903	' Disturbance amplitude : ',F5.2, ' m/s'/ &
[94]	1904	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1905	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1906	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1907	' to i/j =',I4)
	1908	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
[1697]	1909	F6.3, ' m2/s2')
[1]	1910	474 FORMAT (' Random number generator used : ',A/)
	1911	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1912	'respectively, if'/ &
	1913	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1914	' 3D-simulation'/)
	1915	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1916	'respectively, if the'/ &
	1917	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1918	' the 3D-simulation'/)
	1919	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1920	'respectively, if the'/ &
	1921	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1922	' the 3D-simulation'/)
	1923	500 FORMAT (//' 1D-Model parameters:'/ &
	1924	' -------------------'// &
	1925	' Simulation time: ',F8.1,' s'/ &
	1926	' Run-controll output every: ',F8.1,' s'/ &
	1927	' Vertical profile output every: ',F8.1,' s'/ &
	1928	' Mixing length calculation: ',A/ &
	1929	' Dissipation calculation: ',A/)
	1930	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
[667]	1931	503 FORMAT (' --> Momentum advection via Wicker-Skamarock-Scheme 5th order')
	1932	504 FORMAT (' --> Scalar advection via Wicker-Skamarock-Scheme 5th order')
[3529]	1933	512 FORMAT (/' Date: ',A10,6X,'Run: ',A34/ &
[1429]	1934	' Time: ',A8,6X,'Run-No.: ',I2.2/ &
	1935	' Run on host: ',A10,6X,'En-No.: ',I2.2)
[4444]	1936	#if defined( __parallel )
[1791]	1937	600 FORMAT (/' Nesting informations:'/ &
	1938	' --------------------'/ &
[1797]	1939	' Nesting mode: ',A/ &
	1940	' Nesting-datatransfer mode: ',A// &
[1791]	1941	' Nest id parent number lower left coordinates name'/ &
	1942	' (*=me) id of PEs x (m) y (m)' )
	1943	601 FORMAT (2X,A1,1X,I2.2,6X,I2.2,5X,I5,5X,F8.2,2X,F8.2,5X,A)
[4444]	1944	#endif
[1]	1945
	1946	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |