Home

Context Navigation

source: palm/trunk/SOURCE/header.f90 @ 431

Last change on this file since 431 was 430, checked in by raasch, 15 years ago
bugfix concerning gradient_level indices in header
Property svn:keywords set to `Id`
File size: 75.9 KB

Rev	Line
[1]	1	SUBROUTINE header
	2
	3	!------------------------------------------------------------------------------!
[254]	4	! Current revisions:
[1]	5	! -----------------
[411]	6	! +large scale vertical motion (subsidence/ascent)
[430]	7	! Bugfix: index problem concerning gradient_level indices removed
[392]	8	!
	9	!
[410]	10	! Branch revisions:
	11	! -----------------
	12	! Masked data output: + dt_domask, mask_01~20_x\|y\|z, mask_01~20_x\|y\|z_loop,
	13	! mask_scale\|_x\|y\|z, masks, netcdf_format_mask[_av], skip_time_domask
	14	!
[392]	15	! Former revisions:
	16	! -----------------
	17	! $Id: header.f90 430 2010-01-29 09:14:09Z raasch $
	18	!
	19	! 346 2009-07-06 10:13:41Z raasch
[328]	20	! initializing_actions='read_data_for_recycling' renamed to 'cyclic_fill'
[291]	21	! Coupling with independent precursor runs.
[254]	22	! Output of messages replaced by message handling routine.
[336]	23	! Output of several additional dvr parameters
[240]	24	! +canyon_height, canyon_width_x, canyon_width_y, canyon_wall_left,
[241]	25	! canyon_wall_south, conserve_volume_flow_mode, dp_external, dp_level_b,
	26	! dp_smooth, dpdxy, u_bulk, v_bulk
[256]	27	! topography_grid_convention moved from user_header
[292]	28	! small bugfix concerning 3d 64bit netcdf output format
[1]	29	!
[226]	30	! 206 2008-10-13 14:59:11Z raasch
	31	! Bugfix: error in zu index in case of section_xy = -1
	32	!
[200]	33	! 198 2008-09-17 08:55:28Z raasch
	34	! Format adjustments allowing output of larger revision numbers
	35	!
[198]	36	! 197 2008-09-16 15:29:03Z raasch
	37	! allow 100 spectra levels instead of 10 for consistency with
	38	! define_netcdf_header,
	39	! bugfix in the output of the characteristic levels of potential temperature,
	40	! geostrophic wind, scalar concentration, humidity and leaf area density,
	41	! output of turbulence recycling informations
	42	!
[139]	43	! 138 2007-11-28 10:03:58Z letzel
	44	! Allow new case bc_uv_t = 'dirichlet_0' for channel flow.
	45	! Allow two instead of one digit to specify isosurface and slicer variables.
	46	! Output of sorting frequency of particles
	47	!
[110]	48	! 108 2007-08-24 15:10:38Z letzel
	49	! Output of informations for coupled model runs (boundary conditions etc.)
	50	! + output of momentumfluxes at the top boundary
	51	! Rayleigh damping for ocean, e_init
	52	!
[98]	53	! 97 2007-06-21 08:23:15Z raasch
	54	! Adjustments for the ocean version.
	55	! use_pt_reference renamed use_reference
	56	!
[90]	57	! 87 2007-05-22 15:46:47Z raasch
	58	! Bugfix: output of use_upstream_for_tke
	59	!
[83]	60	! 82 2007-04-16 15:40:52Z raasch
	61	! Preprocessor strings for different linux clusters changed to "lc",
	62	! routine local_flush is used for buffer flushing
	63	!
[77]	64	! 76 2007-03-29 00:58:32Z raasch
	65	! Output of netcdf_64bit_3d, particles-package is now part of the default code,
	66	! output of the loop optimization method, moisture renamed humidity,
	67	! output of subversion revision number
	68	!
[39]	69	! 19 2007-02-23 04:53:48Z raasch
	70	! Output of scalar flux applied at top boundary
	71	!
[3]	72	! RCS Log replace by Id keyword, revision history cleaned up
	73	!
[1]	74	! Revision 1.63 2006/08/22 13:53:13 raasch
	75	! Output of dz_max
	76	!
	77	! Revision 1.1 1997/08/11 06:17:20 raasch
	78	! Initial revision
	79	!
	80	!
	81	! Description:
	82	! ------------
	83	! Writing a header with all important informations about the actual run.
	84	! This subroutine is called three times, two times at the beginning
	85	! (writing information on files RUN_CONTROL and HEADER) and one time at the
	86	! end of the run, then writing additional information about CPU-usage on file
	87	! header.
[411]	88	!-----------------------------------------------------------------------------!
[1]	89
	90	USE arrays_3d
	91	USE control_parameters
	92	USE cloud_parameters
	93	USE cpulog
	94	USE dvrp_variables
	95	USE grid_variables
	96	USE indices
	97	USE model_1d
	98	USE particle_attributes
	99	USE pegrid
[411]	100	USE subsidence_mod
[1]	101	USE spectrum
	102
	103	IMPLICIT NONE
	104
	105	CHARACTER (LEN=1) :: prec
	106	CHARACTER (LEN=2) :: do2d_mode
	107	CHARACTER (LEN=5) :: section_chr
	108	CHARACTER (LEN=9) :: time_to_string
	109	CHARACTER (LEN=10) :: coor_chr, host_chr
	110	CHARACTER (LEN=16) :: begin_chr
[200]	111	CHARACTER (LEN=23) :: ver_rev
[1]	112	CHARACTER (LEN=40) :: output_format
[167]	113	CHARACTER (LEN=70) :: char1, char2, dopr_chr, &
[1]	114	do2d_xy, do2d_xz, do2d_yz, do3d_chr, &
[410]	115	domask_chr, run_classification
[167]	116	CHARACTER (LEN=86) :: coordinates, gradients, learde, slices, &
	117	temperatures, ugcomponent, vgcomponent
[1]	118	CHARACTER (LEN=85) :: roben, runten
	119
[410]	120	CHARACTER (LEN=1), DIMENSION(1:3) :: dir = (/ 'x', 'y', 'z' /)
	121
	122	INTEGER :: av, bh, blx, bly, bxl, bxr, byn, bys, ch, count, cwx, cwy, &
	123	cxl, cxr, cyn, cys, dim, i, ihost, io, j, l, ll, m, mpi_type
[1]	124	REAL :: cpuseconds_per_simulated_second
	125
	126	!
	127	!-- Open the output file. At the end of the simulation, output is directed
	128	!-- to unit 19.
	129	IF ( ( runnr == 0 .OR. force_print_header ) .AND. &
	130	.NOT. simulated_time_at_begin /= simulated_time ) THEN
	131	io = 15 ! header output on file RUN_CONTROL
	132	ELSE
	133	io = 19 ! header output on file HEADER
	134	ENDIF
	135	CALL check_open( io )
	136
	137	!
	138	!-- At the end of the run, output file (HEADER) will be rewritten with
	139	!-- new informations
	140	IF ( io == 19 .AND. simulated_time_at_begin /= simulated_time ) REWIND( 19 )
	141
	142	!
	143	!-- Determine kind of model run
	144	IF ( TRIM( initializing_actions ) == 'read_restart_data' ) THEN
	145	run_classification = '3D - restart run'
[328]	146	ELSEIF ( TRIM( initializing_actions ) == 'cyclic_fill' ) THEN
	147	run_classification = '3D - run with cyclic fill of 3D - prerun data'
[147]	148	ELSEIF ( INDEX( initializing_actions, 'set_constant_profiles' ) /= 0 ) THEN
	149	run_classification = '3D - run without 1D - prerun'
[197]	150	ELSEIF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
[147]	151	run_classification = '3D - run with 1D - prerun'
[197]	152	ELSEIF ( INDEX( initializing_actions, 'by_user' ) /=0 ) THEN
	153	run_classification = '3D - run initialized by user'
[1]	154	ELSE
[254]	155	message_string = ' unknown action(s): ' // TRIM( initializing_actions )
	156	CALL message( 'header', 'PA0191', 0, 0, 0, 6, 0 )
[1]	157	ENDIF
[97]	158	IF ( ocean ) THEN
	159	run_classification = 'ocean - ' // run_classification
	160	ELSE
	161	run_classification = 'atmosphere - ' // run_classification
	162	ENDIF
[1]	163
	164	!
	165	!-- Run-identification, date, time, host
	166	host_chr = host(1:10)
[75]	167	ver_rev = TRIM( version ) // ' ' // TRIM( revision )
[102]	168	WRITE ( io, 100 ) ver_rev, TRIM( run_classification )
[291]	169	IF ( TRIM( coupling_mode ) /= 'uncoupled' ) THEN
	170	#if defined( __mpi2 )
	171	mpi_type = 2
	172	#else
	173	mpi_type = 1
	174	#endif
	175	WRITE ( io, 101 ) mpi_type, coupling_mode
	176	ENDIF
[102]	177	WRITE ( io, 102 ) run_date, run_identifier, run_time, runnr, &
	178	ADJUSTR( host_chr )
[1]	179	#if defined( __parallel )
	180	IF ( npex == -1 .AND. pdims(2) /= 1 ) THEN
	181	char1 = 'calculated'
	182	ELSEIF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	183	host(1:2) == 'lc' ) .AND. &
	184	npex == -1 .AND. pdims(2) == 1 ) THEN
	185	char1 = 'forced'
	186	ELSE
	187	char1 = 'predefined'
	188	ENDIF
	189	IF ( threads_per_task == 1 ) THEN
[102]	190	WRITE ( io, 103 ) numprocs, pdims(1), pdims(2), TRIM( char1 )
[1]	191	ELSE
[102]	192	WRITE ( io, 104 ) numprocs*threads_per_task, numprocs, &
[1]	193	threads_per_task, pdims(1), pdims(2), TRIM( char1 )
	194	ENDIF
	195	IF ( ( host(1:3) == 'ibm' .OR. host(1:3) == 'nec' .OR. &
	196	host(1:2) == 'lc' .OR. host(1:3) == 'dec' ) .AND. &
	197	npex == -1 .AND. pdims(2) == 1 ) &
	198	THEN
[102]	199	WRITE ( io, 106 )
[1]	200	ELSEIF ( pdims(2) == 1 ) THEN
[102]	201	WRITE ( io, 107 ) 'x'
[1]	202	ELSEIF ( pdims(1) == 1 ) THEN
[102]	203	WRITE ( io, 107 ) 'y'
[1]	204	ENDIF
[102]	205	IF ( use_seperate_pe_for_dvrp_output ) WRITE ( io, 105 )
[1]	206	#endif
	207	WRITE ( io, 99 )
	208
	209	!
	210	!-- Numerical schemes
	211	WRITE ( io, 110 )
	212	IF ( psolver(1:7) == 'poisfft' ) THEN
	213	WRITE ( io, 111 ) TRIM( fft_method )
	214	IF ( psolver == 'poisfft_hybrid' ) WRITE ( io, 138 )
	215	ELSEIF ( psolver == 'sor' ) THEN
	216	WRITE ( io, 112 ) nsor_ini, nsor, omega_sor
	217	ELSEIF ( psolver == 'multigrid' ) THEN
	218	WRITE ( io, 135 ) cycle_mg, maximum_grid_level, ngsrb
	219	IF ( mg_cycles == -1 ) THEN
	220	WRITE ( io, 140 ) residual_limit
	221	ELSE
	222	WRITE ( io, 141 ) mg_cycles
	223	ENDIF
	224	IF ( mg_switch_to_pe0_level == 0 ) THEN
	225	WRITE ( io, 136 ) nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	226	nzt_mg(1)
[197]	227	ELSEIF ( mg_switch_to_pe0_level /= -1 ) THEN
[1]	228	WRITE ( io, 137 ) mg_switch_to_pe0_level, &
	229	mg_loc_ind(2,0)-mg_loc_ind(1,0)+1, &
	230	mg_loc_ind(4,0)-mg_loc_ind(3,0)+1, &
	231	nzt_mg(mg_switch_to_pe0_level), &
	232	nxr_mg(1)-nxl_mg(1)+1, nyn_mg(1)-nys_mg(1)+1, &
	233	nzt_mg(1)
	234	ENDIF
	235	ENDIF
	236	IF ( call_psolver_at_all_substeps .AND. timestep_scheme(1:5) == 'runge' ) &
	237	THEN
	238	WRITE ( io, 142 )
	239	ENDIF
	240
	241	IF ( momentum_advec == 'pw-scheme' ) THEN
	242	WRITE ( io, 113 )
	243	ELSE
	244	WRITE ( io, 114 )
	245	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	246	IF ( overshoot_limit_u /= 0.0 .OR. overshoot_limit_v /= 0.0 .OR. &
	247	overshoot_limit_w /= 0.0 ) THEN
	248	WRITE ( io, 127 ) overshoot_limit_u, overshoot_limit_v, &
	249	overshoot_limit_w
	250	ENDIF
	251	IF ( ups_limit_u /= 0.0 .OR. ups_limit_v /= 0.0 .OR. &
	252	ups_limit_w /= 0.0 ) &
	253	THEN
	254	WRITE ( io, 125 ) ups_limit_u, ups_limit_v, ups_limit_w
	255	ENDIF
	256	IF ( long_filter_factor /= 0.0 ) WRITE ( io, 115 ) long_filter_factor
	257	ENDIF
	258	IF ( scalar_advec == 'pw-scheme' ) THEN
	259	WRITE ( io, 116 )
	260	ELSEIF ( scalar_advec == 'ups-scheme' ) THEN
	261	WRITE ( io, 117 )
	262	IF ( cut_spline_overshoot ) WRITE ( io, 124 )
	263	IF ( overshoot_limit_e /= 0.0 .OR. overshoot_limit_pt /= 0.0 ) THEN
	264	WRITE ( io, 128 ) overshoot_limit_e, overshoot_limit_pt
	265	ENDIF
	266	IF ( ups_limit_e /= 0.0 .OR. ups_limit_pt /= 0.0 ) THEN
	267	WRITE ( io, 126 ) ups_limit_e, ups_limit_pt
	268	ENDIF
	269	ELSE
	270	WRITE ( io, 118 )
	271	ENDIF
[63]	272
	273	WRITE ( io, 139 ) TRIM( loop_optimization )
	274
[1]	275	IF ( galilei_transformation ) THEN
	276	IF ( use_ug_for_galilei_tr ) THEN
	277	char1 = 'geostrophic wind'
	278	ELSE
	279	char1 = 'mean wind in model domain'
	280	ENDIF
	281	IF ( simulated_time_at_begin == simulated_time ) THEN
	282	char2 = 'at the start of the run'
	283	ELSE
	284	char2 = 'at the end of the run'
	285	ENDIF
	286	WRITE ( io, 119 ) TRIM( char1 ), TRIM( char2 ), &
	287	advected_distance_x/1000.0, advected_distance_y/1000.0
	288	ENDIF
	289	IF ( timestep_scheme == 'leapfrog' ) THEN
	290	WRITE ( io, 120 )
	291	ELSEIF ( timestep_scheme == 'leapfrog+euler' ) THEN
	292	WRITE ( io, 121 )
	293	ELSE
	294	WRITE ( io, 122 ) timestep_scheme
	295	ENDIF
[87]	296	IF ( use_upstream_for_tke ) WRITE ( io, 143 )
[1]	297	IF ( rayleigh_damping_factor /= 0.0 ) THEN
[108]	298	IF ( .NOT. ocean ) THEN
	299	WRITE ( io, 123 ) 'above', rayleigh_damping_height, &
	300	rayleigh_damping_factor
	301	ELSE
	302	WRITE ( io, 123 ) 'below', rayleigh_damping_height, &
	303	rayleigh_damping_factor
	304	ENDIF
[1]	305	ENDIF
[75]	306	IF ( humidity ) THEN
[1]	307	IF ( .NOT. cloud_physics ) THEN
	308	WRITE ( io, 129 )
	309	ELSE
	310	WRITE ( io, 130 )
	311	WRITE ( io, 131 )
	312	IF ( radiation ) WRITE ( io, 132 )
	313	IF ( precipitation ) WRITE ( io, 133 )
	314	ENDIF
	315	ENDIF
	316	IF ( passive_scalar ) WRITE ( io, 134 )
[240]	317	IF ( conserve_volume_flow ) THEN
[241]	318	WRITE ( io, 150 ) conserve_volume_flow_mode
	319	IF ( TRIM( conserve_volume_flow_mode ) == 'bulk_velocity' ) THEN
	320	WRITE ( io, 151 ) u_bulk, v_bulk
	321	ENDIF
[240]	322	ELSEIF ( dp_external ) THEN
	323	IF ( dp_smooth ) THEN
[241]	324	WRITE ( io, 152 ) dpdxy, dp_level_b, ', vertically smoothed.'
[240]	325	ELSE
[241]	326	WRITE ( io, 152 ) dpdxy, dp_level_b, '.'
[240]	327	ENDIF
	328	ENDIF
[411]	329	IF ( large_scale_subsidence ) THEN
	330	WRITE ( io, 153 )
	331	WRITE ( io, 154 )
	332	ENDIF
[1]	333	WRITE ( io, 99 )
	334
	335	!
	336	!-- Runtime and timestep informations
	337	WRITE ( io, 200 )
	338	IF ( .NOT. dt_fixed ) THEN
	339	WRITE ( io, 201 ) dt_max, cfl_factor
	340	ELSE
	341	WRITE ( io, 202 ) dt
	342	ENDIF
	343	WRITE ( io, 203 ) simulated_time_at_begin, end_time
	344
	345	IF ( time_restart /= 9999999.9 .AND. &
	346	simulated_time_at_begin == simulated_time ) THEN
	347	IF ( dt_restart == 9999999.9 ) THEN
	348	WRITE ( io, 204 ) ' Restart at: ',time_restart
	349	ELSE
	350	WRITE ( io, 205 ) ' Restart at: ',time_restart, dt_restart
	351	ENDIF
	352	ENDIF
	353
	354	IF ( simulated_time_at_begin /= simulated_time ) THEN
	355	i = MAX ( log_point_s(10)%counts, 1 )
	356	IF ( ( simulated_time - simulated_time_at_begin ) == 0.0 ) THEN
	357	cpuseconds_per_simulated_second = 0.0
	358	ELSE
	359	cpuseconds_per_simulated_second = log_point_s(10)%sum / &
	360	( simulated_time - &
	361	simulated_time_at_begin )
	362	ENDIF
	363	WRITE ( io, 206 ) simulated_time, log_point_s(10)%sum, &
	364	log_point_s(10)%sum / REAL( i ), &
	365	cpuseconds_per_simulated_second
	366	IF ( time_restart /= 9999999.9 .AND. time_restart < end_time ) THEN
	367	IF ( dt_restart == 9999999.9 ) THEN
	368	WRITE ( io, 204 ) ' Next restart at: ',time_restart
	369	ELSE
	370	WRITE ( io, 205 ) ' Next restart at: ',time_restart, dt_restart
	371	ENDIF
	372	ENDIF
	373	ENDIF
	374
	375	!
[291]	376	!-- Start time for coupled runs, if independent precursor runs for atmosphere
	377	!-- and ocean are used. In this case, coupling_start_time defines the time
	378	!-- when the coupling is switched on.
	379	IF ( coupling_start_time /= 0.0 ) THEN
	380	IF ( coupling_start_time >= simulated_time_at_begin ) THEN
	381	char1 = 'Precursor run for a coupled atmosphere-ocean run'
	382	ELSE
	383	char1 = 'Coupled atmosphere-ocean run following independent ' // &
	384	'precursor runs'
	385	ENDIF
	386	WRITE ( io, 207 ) char1, coupling_start_time
	387	ENDIF
	388
	389	!
[1]	390	!-- Computational grid
[94]	391	IF ( .NOT. ocean ) THEN
	392	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(nzt+1)
	393	IF ( dz_stretch_level_index < nzt+1 ) THEN
	394	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	395	dz_stretch_factor, dz_max
	396	ENDIF
	397	ELSE
	398	WRITE ( io, 250 ) dx, dy, dz, (nx+1)dx, (ny+1)dy, zu(0)
	399	IF ( dz_stretch_level_index > 0 ) THEN
	400	WRITE ( io, 252 ) dz_stretch_level, dz_stretch_level_index, &
	401	dz_stretch_factor, dz_max
	402	ENDIF
[1]	403	ENDIF
	404	WRITE ( io, 254 ) nx, ny, nzt+1, MIN( nnx, nx+1 ), MIN( nny, ny+1 ), &
	405	MIN( nnz+2, nzt+2 )
[76]	406	IF ( numprocs > 1 ) THEN
	407	IF ( nxa == nx .AND. nya == ny .AND. nza == nz ) THEN
	408	WRITE ( io, 255 )
	409	ELSE
	410	WRITE ( io, 256 ) nnx-(nxa-nx), nny-(nya-ny), nzt+2
	411	ENDIF
[1]	412	ENDIF
	413	IF ( sloping_surface ) WRITE ( io, 260 ) alpha_surface
	414
	415	!
	416	!-- Topography
	417	WRITE ( io, 270 ) topography
	418	SELECT CASE ( TRIM( topography ) )
	419
	420	CASE ( 'flat' )
	421	! no actions necessary
	422
	423	CASE ( 'single_building' )
	424	blx = INT( building_length_x / dx )
	425	bly = INT( building_length_y / dy )
	426	bh = INT( building_height / dz )
	427
	428	IF ( building_wall_left == 9999999.9 ) THEN
	429	building_wall_left = ( nx + 1 - blx ) / 2 * dx
	430	ENDIF
	431	bxl = INT ( building_wall_left / dx + 0.5 )
	432	bxr = bxl + blx
	433
	434	IF ( building_wall_south == 9999999.9 ) THEN
	435	building_wall_south = ( ny + 1 - bly ) / 2 * dy
	436	ENDIF
	437	bys = INT ( building_wall_south / dy + 0.5 )
	438	byn = bys + bly
	439
	440	WRITE ( io, 271 ) building_length_x, building_length_y, &
	441	building_height, bxl, bxr, bys, byn
	442
[240]	443	CASE ( 'single_street_canyon' )
	444	ch = NINT( canyon_height / dz )
	445	IF ( canyon_width_x /= 9999999.9 ) THEN
	446	!
	447	!-- Street canyon in y direction
	448	cwx = NINT( canyon_width_x / dx )
	449	IF ( canyon_wall_left == 9999999.9 ) THEN
	450	canyon_wall_left = ( nx + 1 - cwx ) / 2 * dx
	451	ENDIF
	452	cxl = NINT( canyon_wall_left / dx )
	453	cxr = cxl + cwx
	454	WRITE ( io, 272 ) 'y', canyon_height, ch, 'u', cxl, cxr
	455
	456	ELSEIF ( canyon_width_y /= 9999999.9 ) THEN
	457	!
	458	!-- Street canyon in x direction
	459	cwy = NINT( canyon_width_y / dy )
	460	IF ( canyon_wall_south == 9999999.9 ) THEN
	461	canyon_wall_south = ( ny + 1 - cwy ) / 2 * dy
	462	ENDIF
	463	cys = NINT( canyon_wall_south / dy )
	464	cyn = cys + cwy
	465	WRITE ( io, 272 ) 'x', canyon_height, ch, 'v', cys, cyn
	466	ENDIF
	467
[1]	468	END SELECT
	469
[256]	470	IF ( TRIM( topography ) /= 'flat' ) THEN
	471	IF ( TRIM( topography_grid_convention ) == ' ' ) THEN
	472	IF ( TRIM( topography ) == 'single_building' .OR. &
	473	TRIM( topography ) == 'single_street_canyon' ) THEN
	474	WRITE ( io, 278 )
	475	ELSEIF ( TRIM( topography ) == 'read_from_file' ) THEN
	476	WRITE ( io, 279 )
	477	ENDIF
	478	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_edge' ) THEN
	479	WRITE ( io, 278 )
	480	ELSEIF ( TRIM( topography_grid_convention ) == 'cell_center' ) THEN
	481	WRITE ( io, 279 )
	482	ENDIF
	483	ENDIF
	484
[138]	485	IF ( plant_canopy ) THEN
	486
	487	WRITE ( io, 280 ) canopy_mode, pch_index, drag_coefficient
[153]	488	IF ( passive_scalar ) THEN
	489	WRITE ( io, 281 ) scalar_exchange_coefficient, &
	490	leaf_surface_concentration
	491	ENDIF
[138]	492
[1]	493	!
[153]	494	!-- Heat flux at the top of vegetation
	495	WRITE ( io, 282 ) cthf
	496
	497	!
[138]	498	!-- Leaf area density profile
	499	!-- Building output strings, starting with surface value
	500	WRITE ( learde, '(F6.2)' ) lad_surface
	501	gradients = '------'
	502	slices = ' 0'
	503	coordinates = ' 0.0'
	504	i = 1
	505	DO WHILE ( lad_vertical_gradient_level_ind(i) /= -9999 )
	506
	507	WRITE (coor_chr,'(F7.2)') lad(lad_vertical_gradient_level_ind(i))
	508	learde = TRIM( learde ) // ' ' // TRIM( coor_chr )
	509
	510	WRITE (coor_chr,'(F7.2)') lad_vertical_gradient(i)
	511	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	512
	513	WRITE (coor_chr,'(I7)') lad_vertical_gradient_level_ind(i)
	514	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	515
	516	WRITE (coor_chr,'(F7.1)') lad_vertical_gradient_level(i)
	517	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	518
	519	i = i + 1
	520	ENDDO
	521
[153]	522	WRITE ( io, 283 ) TRIM( coordinates ), TRIM( learde ), &
[138]	523	TRIM( gradients ), TRIM( slices )
	524
	525	ENDIF
	526
	527	!
[1]	528	!-- Boundary conditions
	529	IF ( ibc_p_b == 0 ) THEN
	530	runten = 'p(0) = 0 \|'
	531	ELSEIF ( ibc_p_b == 1 ) THEN
	532	runten = 'p(0) = p(1) \|'
	533	ELSE
	534	runten = 'p(0) = p(1) +R\|'
	535	ENDIF
	536	IF ( ibc_p_t == 0 ) THEN
	537	roben = 'p(nzt+1) = 0 \|'
	538	ELSE
	539	roben = 'p(nzt+1) = p(nzt) \|'
	540	ENDIF
	541
	542	IF ( ibc_uv_b == 0 ) THEN
	543	runten = TRIM( runten ) // ' uv(0) = -uv(1) \|'
	544	ELSE
	545	runten = TRIM( runten ) // ' uv(0) = uv(1) \|'
	546	ENDIF
[132]	547	IF ( TRIM( bc_uv_t ) == 'dirichlet_0' ) THEN
	548	roben = TRIM( roben ) // ' uv(nzt+1) = 0 \|'
	549	ELSEIF ( ibc_uv_t == 0 ) THEN
[1]	550	roben = TRIM( roben ) // ' uv(nzt+1) = ug(nzt+1), vg(nzt+1) \|'
	551	ELSE
	552	roben = TRIM( roben ) // ' uv(nzt+1) = uv(nzt) \|'
	553	ENDIF
	554
	555	IF ( ibc_pt_b == 0 ) THEN
	556	runten = TRIM( runten ) // ' pt(0) = pt_surface'
[102]	557	ELSEIF ( ibc_pt_b == 1 ) THEN
[1]	558	runten = TRIM( runten ) // ' pt(0) = pt(1)'
[102]	559	ELSEIF ( ibc_pt_b == 2 ) THEN
	560	runten = TRIM( runten ) // ' pt(0) = from coupled model'
[1]	561	ENDIF
	562	IF ( ibc_pt_t == 0 ) THEN
[19]	563	roben = TRIM( roben ) // ' pt(nzt+1) = pt_top'
	564	ELSEIF( ibc_pt_t == 1 ) THEN
	565	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt)'
	566	ELSEIF( ibc_pt_t == 2 ) THEN
	567	roben = TRIM( roben ) // ' pt(nzt+1) = pt(nzt) + dpt/dz_ini'
[1]	568	ENDIF
	569
	570	WRITE ( io, 300 ) runten, roben
	571
	572	IF ( .NOT. constant_diffusion ) THEN
	573	IF ( ibc_e_b == 1 ) THEN
	574	runten = 'e(0) = e(1)'
	575	ELSE
	576	runten = 'e(0) = e(1) = (u/0.1)*2'
	577	ENDIF
	578	roben = 'e(nzt+1) = e(nzt) = e(nzt-1)'
	579
[97]	580	WRITE ( io, 301 ) 'e', runten, roben
[1]	581
	582	ENDIF
	583
[97]	584	IF ( ocean ) THEN
	585	runten = 'sa(0) = sa(1)'
	586	IF ( ibc_sa_t == 0 ) THEN
	587	roben = 'sa(nzt+1) = sa_surface'
[1]	588	ELSE
[97]	589	roben = 'sa(nzt+1) = sa(nzt)'
[1]	590	ENDIF
[97]	591	WRITE ( io, 301 ) 'sa', runten, roben
	592	ENDIF
[1]	593
[97]	594	IF ( humidity ) THEN
	595	IF ( ibc_q_b == 0 ) THEN
	596	runten = 'q(0) = q_surface'
	597	ELSE
	598	runten = 'q(0) = q(1)'
	599	ENDIF
	600	IF ( ibc_q_t == 0 ) THEN
	601	roben = 'q(nzt) = q_top'
	602	ELSE
	603	roben = 'q(nzt) = q(nzt-1) + dq/dz'
	604	ENDIF
	605	WRITE ( io, 301 ) 'q', runten, roben
	606	ENDIF
[1]	607
[97]	608	IF ( passive_scalar ) THEN
	609	IF ( ibc_q_b == 0 ) THEN
	610	runten = 's(0) = s_surface'
	611	ELSE
	612	runten = 's(0) = s(1)'
	613	ENDIF
	614	IF ( ibc_q_t == 0 ) THEN
	615	roben = 's(nzt) = s_top'
	616	ELSE
	617	roben = 's(nzt) = s(nzt-1) + ds/dz'
	618	ENDIF
	619	WRITE ( io, 301 ) 's', runten, roben
[1]	620	ENDIF
	621
	622	IF ( use_surface_fluxes ) THEN
	623	WRITE ( io, 303 )
	624	IF ( constant_heatflux ) THEN
	625	WRITE ( io, 306 ) surface_heatflux
	626	IF ( random_heatflux ) WRITE ( io, 307 )
	627	ENDIF
[75]	628	IF ( humidity .AND. constant_waterflux ) THEN
[1]	629	WRITE ( io, 311 ) surface_waterflux
	630	ENDIF
	631	IF ( passive_scalar .AND. constant_waterflux ) THEN
	632	WRITE ( io, 313 ) surface_waterflux
	633	ENDIF
	634	ENDIF
	635
[19]	636	IF ( use_top_fluxes ) THEN
	637	WRITE ( io, 304 )
[102]	638	IF ( coupling_mode == 'uncoupled' ) THEN
[151]	639	WRITE ( io, 320 ) top_momentumflux_u, top_momentumflux_v
[102]	640	IF ( constant_top_heatflux ) THEN
	641	WRITE ( io, 306 ) top_heatflux
	642	ENDIF
	643	ELSEIF ( coupling_mode == 'ocean_to_atmosphere' ) THEN
	644	WRITE ( io, 316 )
[19]	645	ENDIF
[97]	646	IF ( ocean .AND. constant_top_salinityflux ) THEN
	647	WRITE ( io, 309 ) top_salinityflux
	648	ENDIF
[75]	649	IF ( humidity .OR. passive_scalar ) THEN
[19]	650	WRITE ( io, 315 )
	651	ENDIF
	652	ENDIF
	653
[1]	654	IF ( prandtl_layer ) THEN
[94]	655	WRITE ( io, 305 ) 0.5 * (zu(1)-zu(0)), roughness_length, kappa, &
	656	rif_min, rif_max
[1]	657	IF ( .NOT. constant_heatflux ) WRITE ( io, 308 )
[75]	658	IF ( humidity .AND. .NOT. constant_waterflux ) THEN
[1]	659	WRITE ( io, 312 )
	660	ENDIF
	661	IF ( passive_scalar .AND. .NOT. constant_waterflux ) THEN
	662	WRITE ( io, 314 )
	663	ENDIF
	664	ELSE
	665	IF ( INDEX(initializing_actions, 'set_1d-model_profiles') /= 0 ) THEN
	666	WRITE ( io, 310 ) rif_min, rif_max
	667	ENDIF
	668	ENDIF
	669
	670	WRITE ( io, 317 ) bc_lr, bc_ns
	671	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	672	WRITE ( io, 318 ) outflow_damping_width, km_damp_max
[151]	673	IF ( turbulent_inflow ) THEN
	674	WRITE ( io, 319 ) recycling_width, recycling_plane, &
	675	inflow_damping_height, inflow_damping_width
	676	ENDIF
[1]	677	ENDIF
	678
	679	!
	680	!-- Listing of 1D-profiles
[151]	681	WRITE ( io, 325 ) dt_dopr_listing
[1]	682	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	683	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	684	ENDIF
	685
	686	!
	687	!-- DATA output
	688	WRITE ( io, 330 )
	689	IF ( averaging_interval_pr /= 0.0 ) THEN
[151]	690	WRITE ( io, 326 ) averaging_interval_pr, dt_averaging_input_pr
[1]	691	ENDIF
	692
	693	!
	694	!-- 1D-profiles
[346]	695	dopr_chr = 'Profile:'
[1]	696	IF ( dopr_n /= 0 ) THEN
	697	WRITE ( io, 331 )
	698
	699	output_format = ''
	700	IF ( netcdf_output ) THEN
	701	IF ( netcdf_64bit ) THEN
	702	output_format = 'netcdf (64 bit offset)'
	703	ELSE
	704	output_format = 'netcdf'
	705	ENDIF
	706	ENDIF
	707	IF ( profil_output ) THEN
	708	IF ( netcdf_output ) THEN
	709	output_format = TRIM( output_format ) // ' and profil'
	710	ELSE
	711	output_format = 'profil'
	712	ENDIF
	713	ENDIF
[292]	714	WRITE ( io, 344 ) output_format
[1]	715
	716	DO i = 1, dopr_n
	717	dopr_chr = TRIM( dopr_chr ) // ' ' // TRIM( data_output_pr(i) ) // ','
	718	IF ( LEN_TRIM( dopr_chr ) >= 60 ) THEN
	719	WRITE ( io, 332 ) dopr_chr
	720	dopr_chr = ' :'
	721	ENDIF
	722	ENDDO
	723
	724	IF ( dopr_chr /= '' ) THEN
	725	WRITE ( io, 332 ) dopr_chr
	726	ENDIF
	727	WRITE ( io, 333 ) dt_dopr, averaging_interval_pr, dt_averaging_input_pr
	728	IF ( skip_time_dopr /= 0.0 ) WRITE ( io, 339 ) skip_time_dopr
	729	ENDIF
	730
	731	!
	732	!-- 2D-arrays
	733	DO av = 0, 1
	734
	735	i = 1
	736	do2d_xy = ''
	737	do2d_xz = ''
	738	do2d_yz = ''
	739	DO WHILE ( do2d(av,i) /= ' ' )
	740
	741	l = MAX( 2, LEN_TRIM( do2d(av,i) ) )
	742	do2d_mode = do2d(av,i)(l-1:l)
	743
	744	SELECT CASE ( do2d_mode )
	745	CASE ( 'xy' )
	746	ll = LEN_TRIM( do2d_xy )
	747	do2d_xy = do2d_xy(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	748	CASE ( 'xz' )
	749	ll = LEN_TRIM( do2d_xz )
	750	do2d_xz = do2d_xz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	751	CASE ( 'yz' )
	752	ll = LEN_TRIM( do2d_yz )
	753	do2d_yz = do2d_yz(1:ll) // ' ' // do2d(av,i)(1:l-3) // ','
	754	END SELECT
	755
	756	i = i + 1
	757
	758	ENDDO
	759
	760	IF ( ( ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) .OR. &
	761	( do2d_xz /= '' .AND. section(1,2) /= -9999 ) .OR. &
	762	( do2d_yz /= '' .AND. section(1,3) /= -9999 ) ) .AND. &
	763	( netcdf_output .OR. iso2d_output ) ) THEN
	764
	765	IF ( av == 0 ) THEN
	766	WRITE ( io, 334 ) ''
	767	ELSE
	768	WRITE ( io, 334 ) '(time-averaged)'
	769	ENDIF
	770
	771	IF ( do2d_at_begin ) THEN
	772	begin_chr = 'and at the start'
	773	ELSE
	774	begin_chr = ''
	775	ENDIF
	776
	777	output_format = ''
	778	IF ( netcdf_output ) THEN
	779	IF ( netcdf_64bit ) THEN
	780	output_format = 'netcdf (64 bit offset)'
	781	ELSE
	782	output_format = 'netcdf'
	783	ENDIF
	784	ENDIF
	785	IF ( iso2d_output ) THEN
	786	IF ( netcdf_output ) THEN
	787	output_format = TRIM( output_format ) // ' and iso2d'
	788	ELSE
	789	output_format = 'iso2d'
	790	ENDIF
	791	ENDIF
[292]	792	WRITE ( io, 344 ) output_format
[1]	793
	794	IF ( do2d_xy /= '' .AND. section(1,1) /= -9999 ) THEN
	795	i = 1
	796	slices = '/'
	797	coordinates = '/'
	798	!
	799	!-- Building strings with index and coordinate informations of the
	800	!-- slices
	801	DO WHILE ( section(i,1) /= -9999 )
	802
	803	WRITE (section_chr,'(I5)') section(i,1)
	804	section_chr = ADJUSTL( section_chr )
	805	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	806
[206]	807	IF ( section(i,1) == -1 ) THEN
	808	WRITE (coor_chr,'(F10.1)') -1.0
	809	ELSE
	810	WRITE (coor_chr,'(F10.1)') zu(section(i,1))
	811	ENDIF
[1]	812	coor_chr = ADJUSTL( coor_chr )
	813	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	814
	815	i = i + 1
	816	ENDDO
	817	IF ( av == 0 ) THEN
	818	WRITE ( io, 335 ) 'XY', do2d_xy, dt_do2d_xy, &
	819	TRIM( begin_chr ), 'k', TRIM( slices ), &
	820	TRIM( coordinates )
	821	IF ( skip_time_do2d_xy /= 0.0 ) THEN
	822	WRITE ( io, 339 ) skip_time_do2d_xy
	823	ENDIF
	824	ELSE
	825	WRITE ( io, 342 ) 'XY', do2d_xy, dt_data_output_av, &
	826	TRIM( begin_chr ), averaging_interval, &
	827	dt_averaging_input, 'k', TRIM( slices ), &
	828	TRIM( coordinates )
	829	IF ( skip_time_data_output_av /= 0.0 ) THEN
	830	WRITE ( io, 339 ) skip_time_data_output_av
	831	ENDIF
	832	ENDIF
	833
	834	ENDIF
	835
	836	IF ( do2d_xz /= '' .AND. section(1,2) /= -9999 ) THEN
	837	i = 1
	838	slices = '/'
	839	coordinates = '/'
	840	!
	841	!-- Building strings with index and coordinate informations of the
	842	!-- slices
	843	DO WHILE ( section(i,2) /= -9999 )
	844
	845	WRITE (section_chr,'(I5)') section(i,2)
	846	section_chr = ADJUSTL( section_chr )
	847	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	848
	849	WRITE (coor_chr,'(F10.1)') section(i,2) * dy
	850	coor_chr = ADJUSTL( coor_chr )
	851	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	852
	853	i = i + 1
	854	ENDDO
	855	IF ( av == 0 ) THEN
	856	WRITE ( io, 335 ) 'XZ', do2d_xz, dt_do2d_xz, &
	857	TRIM( begin_chr ), 'j', TRIM( slices ), &
	858	TRIM( coordinates )
	859	IF ( skip_time_do2d_xz /= 0.0 ) THEN
	860	WRITE ( io, 339 ) skip_time_do2d_xz
	861	ENDIF
	862	ELSE
	863	WRITE ( io, 342 ) 'XZ', do2d_xz, dt_data_output_av, &
	864	TRIM( begin_chr ), averaging_interval, &
	865	dt_averaging_input, 'j', TRIM( slices ), &
	866	TRIM( coordinates )
	867	IF ( skip_time_data_output_av /= 0.0 ) THEN
	868	WRITE ( io, 339 ) skip_time_data_output_av
	869	ENDIF
	870	ENDIF
	871	ENDIF
	872
	873	IF ( do2d_yz /= '' .AND. section(1,3) /= -9999 ) THEN
	874	i = 1
	875	slices = '/'
	876	coordinates = '/'
	877	!
	878	!-- Building strings with index and coordinate informations of the
	879	!-- slices
	880	DO WHILE ( section(i,3) /= -9999 )
	881
	882	WRITE (section_chr,'(I5)') section(i,3)
	883	section_chr = ADJUSTL( section_chr )
	884	slices = TRIM( slices ) // TRIM( section_chr ) // '/'
	885
	886	WRITE (coor_chr,'(F10.1)') section(i,3) * dx
	887	coor_chr = ADJUSTL( coor_chr )
	888	coordinates = TRIM( coordinates ) // TRIM( coor_chr ) // '/'
	889
	890	i = i + 1
	891	ENDDO
	892	IF ( av == 0 ) THEN
	893	WRITE ( io, 335 ) 'YZ', do2d_yz, dt_do2d_yz, &
	894	TRIM( begin_chr ), 'i', TRIM( slices ), &
	895	TRIM( coordinates )
	896	IF ( skip_time_do2d_yz /= 0.0 ) THEN
	897	WRITE ( io, 339 ) skip_time_do2d_yz
	898	ENDIF
	899	ELSE
	900	WRITE ( io, 342 ) 'YZ', do2d_yz, dt_data_output_av, &
	901	TRIM( begin_chr ), averaging_interval, &
	902	dt_averaging_input, 'i', TRIM( slices ), &
	903	TRIM( coordinates )
	904	IF ( skip_time_data_output_av /= 0.0 ) THEN
	905	WRITE ( io, 339 ) skip_time_data_output_av
	906	ENDIF
	907	ENDIF
	908	ENDIF
	909
	910	ENDIF
	911
	912	ENDDO
	913
	914	!
	915	!-- 3d-arrays
	916	DO av = 0, 1
	917
	918	i = 1
	919	do3d_chr = ''
	920	DO WHILE ( do3d(av,i) /= ' ' )
	921
	922	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // ','
	923	i = i + 1
	924
	925	ENDDO
	926
	927	IF ( do3d_chr /= '' ) THEN
	928	IF ( av == 0 ) THEN
	929	WRITE ( io, 336 ) ''
	930	ELSE
	931	WRITE ( io, 336 ) '(time-averaged)'
	932	ENDIF
	933
	934	output_format = ''
	935	IF ( netcdf_output ) THEN
[292]	936	IF ( netcdf_64bit_3d ) THEN
[1]	937	output_format = 'netcdf (64 bit offset)'
	938	ELSE
	939	output_format = 'netcdf'
	940	ENDIF
	941	ENDIF
	942	IF ( avs_output ) THEN
	943	IF ( netcdf_output ) THEN
	944	output_format = TRIM( output_format ) // ' and avs'
	945	ELSE
	946	output_format = 'avs'
	947	ENDIF
	948	ENDIF
[292]	949	WRITE ( io, 344 ) output_format
[1]	950
	951	IF ( do3d_at_begin ) THEN
	952	begin_chr = 'and at the start'
	953	ELSE
	954	begin_chr = ''
	955	ENDIF
	956	IF ( av == 0 ) THEN
	957	WRITE ( io, 337 ) do3d_chr, dt_do3d, TRIM( begin_chr ), &
	958	zu(nz_do3d), nz_do3d
	959	ELSE
	960	WRITE ( io, 343 ) do3d_chr, dt_data_output_av, &
	961	TRIM( begin_chr ), averaging_interval, &
	962	dt_averaging_input, zu(nz_do3d), nz_do3d
	963	ENDIF
	964
	965	IF ( do3d_compress ) THEN
	966	do3d_chr = ''
	967	i = 1
	968	DO WHILE ( do3d(av,i) /= ' ' )
	969
	970	SELECT CASE ( do3d(av,i) )
	971	CASE ( 'u' )
	972	j = 1
	973	CASE ( 'v' )
	974	j = 2
	975	CASE ( 'w' )
	976	j = 3
	977	CASE ( 'p' )
	978	j = 4
	979	CASE ( 'pt' )
	980	j = 5
	981	END SELECT
	982	WRITE ( prec, '(I1)' ) plot_3d_precision(j)%precision
	983	do3d_chr = TRIM( do3d_chr ) // ' ' // TRIM( do3d(av,i) ) // &
	984	':' // prec // ','
	985	i = i + 1
	986
	987	ENDDO
	988	WRITE ( io, 338 ) do3d_chr
	989
	990	ENDIF
	991
	992	IF ( av == 0 ) THEN
	993	IF ( skip_time_do3d /= 0.0 ) THEN
	994	WRITE ( io, 339 ) skip_time_do3d
	995	ENDIF
	996	ELSE
	997	IF ( skip_time_data_output_av /= 0.0 ) THEN
	998	WRITE ( io, 339 ) skip_time_data_output_av
	999	ENDIF
	1000	ENDIF
	1001
	1002	ENDIF
	1003
	1004	ENDDO
	1005
	1006	!
[410]	1007	!-- masked arrays
	1008	IF ( masks > 0 ) WRITE ( io, 345 ) &
	1009	mask_scale_x, mask_scale_y, mask_scale_z
	1010	DO mid = 1, masks
	1011	DO av = 0, 1
	1012
	1013	i = 1
	1014	domask_chr = ''
	1015	DO WHILE ( domask(mid,av,i) /= ' ' )
	1016	domask_chr = TRIM( domask_chr ) // ' ' // &
	1017	TRIM( domask(mid,av,i) ) // ','
	1018	i = i + 1
	1019	ENDDO
	1020
	1021	IF ( domask_chr /= '' ) THEN
	1022	IF ( av == 0 ) THEN
	1023	WRITE ( io, 346 ) '', mid
	1024	ELSE
	1025	WRITE ( io, 346 ) ' (time-averaged)', mid
	1026	ENDIF
	1027
	1028	output_format = ''
	1029	IF ( netcdf_output ) THEN
	1030	SELECT CASE ( nc_format_mask(mid,av) )
	1031	CASE ( 1 )
	1032	output_format = 'netcdf (classic format)'
	1033	CASE ( 2 )
	1034	output_format = 'netcdf (64bit offset format)'
	1035	CASE ( 3 )
	1036	output_format = 'netcdf (NetCDF 4 format)'
	1037	CASE ( 4 )
	1038	output_format = 'netcdf (NetCDF 4 classic model format)'
	1039	END SELECT
	1040	ENDIF
	1041	WRITE ( io, 344 ) output_format
	1042
	1043	IF ( av == 0 ) THEN
	1044	WRITE ( io, 347 ) domask_chr, dt_domask(mid)
	1045	ELSE
	1046	WRITE ( io, 348 ) domask_chr, dt_data_output_av, &
	1047	averaging_interval, dt_averaging_input
	1048	ENDIF
	1049
	1050	IF ( av == 0 ) THEN
	1051	IF ( skip_time_domask(mid) /= 0.0 ) THEN
	1052	WRITE ( io, 339 ) skip_time_domask(mid)
	1053	ENDIF
	1054	ELSE
	1055	IF ( skip_time_data_output_av /= 0.0 ) THEN
	1056	WRITE ( io, 339 ) skip_time_data_output_av
	1057	ENDIF
	1058	ENDIF
	1059	!
	1060	!-- output locations
	1061	DO dim = 1, 3
	1062	IF ( mask(mid,dim,1) >= 0.0 ) THEN
	1063	count = 0
	1064	DO WHILE ( mask(mid,dim,count+1) >= 0.0 )
	1065	count = count + 1
	1066	ENDDO
	1067	WRITE ( io, 349 ) dir(dim), dir(dim), mid, dir(dim), &
	1068	mask(mid,dim,:count)
	1069	ELSEIF ( mask_loop(mid,dim,1) < 0.0 .AND. &
	1070	mask_loop(mid,dim,2) < 0.0 .AND. &
	1071	mask_loop(mid,dim,3) == 0.0 ) THEN
	1072	WRITE ( io, 350 ) dir(dim), dir(dim)
	1073	ELSEIF ( mask_loop(mid,dim,3) == 0.0 ) THEN
	1074	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1075	mask_loop(mid,dim,1:2)
	1076	ELSE
	1077	WRITE ( io, 351 ) dir(dim), dir(dim), mid, dir(dim), &
	1078	mask_loop(mid,dim,1:3)
	1079	ENDIF
	1080	ENDDO
	1081	ENDIF
	1082
	1083	ENDDO
	1084	ENDDO
	1085
	1086	!
[1]	1087	!-- Timeseries
	1088	IF ( dt_dots /= 9999999.9 ) THEN
	1089	WRITE ( io, 340 )
	1090
	1091	output_format = ''
	1092	IF ( netcdf_output ) THEN
	1093	IF ( netcdf_64bit ) THEN
	1094	output_format = 'netcdf (64 bit offset)'
	1095	ELSE
	1096	output_format = 'netcdf'
	1097	ENDIF
	1098	ENDIF
	1099	IF ( profil_output ) THEN
	1100	IF ( netcdf_output ) THEN
	1101	output_format = TRIM( output_format ) // ' and profil'
	1102	ELSE
	1103	output_format = 'profil'
	1104	ENDIF
	1105	ENDIF
[292]	1106	WRITE ( io, 344 ) output_format
[1]	1107	WRITE ( io, 341 ) dt_dots
	1108	ENDIF
	1109
	1110	#if defined( __dvrp_graphics )
	1111	!
	1112	!-- Dvrp-output
	1113	IF ( dt_dvrp /= 9999999.9 ) THEN
	1114	WRITE ( io, 360 ) dt_dvrp, TRIM( dvrp_output ), TRIM( dvrp_host ), &
	1115	TRIM( dvrp_username ), TRIM( dvrp_directory )
	1116	i = 1
	1117	l = 0
[336]	1118	m = 0
[1]	1119	DO WHILE ( mode_dvrp(i) /= ' ' )
	1120	IF ( mode_dvrp(i)(1:10) == 'isosurface' ) THEN
[130]	1121	READ ( mode_dvrp(i), '(10X,I2)' ) j
[1]	1122	l = l + 1
	1123	IF ( do3d(0,j) /= ' ' ) THEN
[336]	1124	WRITE ( io, 361 ) TRIM( do3d(0,j) ), threshold(l), &
	1125	isosurface_color(:,l)
[1]	1126	ENDIF
	1127	ELSEIF ( mode_dvrp(i)(1:6) == 'slicer' ) THEN
[130]	1128	READ ( mode_dvrp(i), '(6X,I2)' ) j
[336]	1129	m = m + 1
	1130	IF ( do2d(0,j) /= ' ' ) THEN
	1131	WRITE ( io, 362 ) TRIM( do2d(0,j) ), &
	1132	slicer_range_limits_dvrp(:,m)
	1133	ENDIF
[1]	1134	ELSEIF ( mode_dvrp(i)(1:9) == 'particles' ) THEN
[336]	1135	WRITE ( io, 363 ) dvrp_psize
	1136	IF ( particle_dvrpsize /= 'none' ) THEN
	1137	WRITE ( io, 364 ) 'size', TRIM( particle_dvrpsize ), &
	1138	dvrpsize_interval
	1139	ENDIF
	1140	IF ( particle_color /= 'none' ) THEN
	1141	WRITE ( io, 364 ) 'color', TRIM( particle_color ), &
	1142	color_interval
	1143	ENDIF
[1]	1144	ENDIF
	1145	i = i + 1
	1146	ENDDO
[237]	1147
[336]	1148	WRITE ( io, 365 ) groundplate_color, superelevation_x, &
	1149	superelevation_y, superelevation, clip_dvrp_l, &
	1150	clip_dvrp_r, clip_dvrp_s, clip_dvrp_n
	1151
	1152	IF ( TRIM( topography ) /= 'flat' ) THEN
	1153	WRITE ( io, 366 ) topography_color
	1154	IF ( cluster_size > 1 ) THEN
	1155	WRITE ( io, 367 ) cluster_size
	1156	ENDIF
[237]	1157	ENDIF
	1158
[1]	1159	ENDIF
	1160	#endif
	1161
	1162	#if defined( __spectra )
	1163	!
	1164	!-- Spectra output
	1165	IF ( dt_dosp /= 9999999.9 ) THEN
	1166	WRITE ( io, 370 )
	1167
	1168	output_format = ''
	1169	IF ( netcdf_output ) THEN
	1170	IF ( netcdf_64bit ) THEN
	1171	output_format = 'netcdf (64 bit offset)'
	1172	ELSE
	1173	output_format = 'netcdf'
	1174	ENDIF
	1175	ENDIF
	1176	IF ( profil_output ) THEN
	1177	IF ( netcdf_output ) THEN
	1178	output_format = TRIM( output_format ) // ' and profil'
	1179	ELSE
	1180	output_format = 'profil'
	1181	ENDIF
	1182	ENDIF
[292]	1183	WRITE ( io, 344 ) output_format
[1]	1184	WRITE ( io, 371 ) dt_dosp
	1185	IF ( skip_time_dosp /= 0.0 ) WRITE ( io, 339 ) skip_time_dosp
	1186	WRITE ( io, 372 ) ( data_output_sp(i), i = 1,10 ), &
	1187	( spectra_direction(i), i = 1,10 ), &
[189]	1188	( comp_spectra_level(i), i = 1,100 ), &
	1189	( plot_spectra_level(i), i = 1,100 ), &
[1]	1190	averaging_interval_sp, dt_averaging_input_pr
	1191	ENDIF
	1192	#endif
	1193
	1194	WRITE ( io, 99 )
	1195
	1196	!
	1197	!-- Physical quantities
	1198	WRITE ( io, 400 )
	1199
	1200	!
	1201	!-- Geostrophic parameters
	1202	WRITE ( io, 410 ) omega, phi, f, fs
	1203
	1204	!
	1205	!-- Other quantities
	1206	WRITE ( io, 411 ) g
[97]	1207	IF ( use_reference ) THEN
	1208	IF ( ocean ) THEN
	1209	WRITE ( io, 412 ) prho_reference
	1210	ELSE
	1211	WRITE ( io, 413 ) pt_reference
	1212	ENDIF
	1213	ENDIF
[1]	1214
	1215	!
	1216	!-- Cloud physics parameters
	1217	IF ( cloud_physics ) THEN
[57]	1218	WRITE ( io, 415 )
	1219	WRITE ( io, 416 ) surface_pressure, r_d, rho_surface, cp, l_v
[1]	1220	ENDIF
	1221
	1222	!-- Profile of the geostrophic wind (component ug)
	1223	!-- Building output strings
	1224	WRITE ( ugcomponent, '(F6.2)' ) ug_surface
	1225	gradients = '------'
	1226	slices = ' 0'
	1227	coordinates = ' 0.0'
	1228	i = 1
	1229	DO WHILE ( ug_vertical_gradient_level_ind(i) /= -9999 )
	1230
[430]	1231	print*, 'i=',i,' level_u=',ug_vertical_gradient_level_ind(i)
[167]	1232	WRITE (coor_chr,'(F6.2,1X)') ug(ug_vertical_gradient_level_ind(i))
[1]	1233	ugcomponent = TRIM( ugcomponent ) // ' ' // TRIM( coor_chr )
	1234
[167]	1235	WRITE (coor_chr,'(F6.2,1X)') ug_vertical_gradient(i)
[1]	1236	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1237
[167]	1238	WRITE (coor_chr,'(I6,1X)') ug_vertical_gradient_level_ind(i)
[1]	1239	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1240
[167]	1241	WRITE (coor_chr,'(F6.1,1X)') ug_vertical_gradient_level(i)
[1]	1242	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1243
[430]	1244	IF ( i == 10 ) THEN
	1245	EXIT
	1246	ELSE
	1247	i = i + 1
	1248	ENDIF
	1249
[1]	1250	ENDDO
	1251
	1252	WRITE ( io, 423 ) TRIM( coordinates ), TRIM( ugcomponent ), &
	1253	TRIM( gradients ), TRIM( slices )
	1254
	1255	!-- Profile of the geostrophic wind (component vg)
	1256	!-- Building output strings
	1257	WRITE ( vgcomponent, '(F6.2)' ) vg_surface
	1258	gradients = '------'
	1259	slices = ' 0'
	1260	coordinates = ' 0.0'
	1261	i = 1
	1262	DO WHILE ( vg_vertical_gradient_level_ind(i) /= -9999 )
	1263
[430]	1264	print*, 'i=',i,' level_v=',vg_vertical_gradient_level_ind(i)
[167]	1265	WRITE (coor_chr,'(F6.2,1X)') vg(vg_vertical_gradient_level_ind(i))
[1]	1266	vgcomponent = TRIM( vgcomponent ) // ' ' // TRIM( coor_chr )
	1267
[167]	1268	WRITE (coor_chr,'(F6.2,1X)') vg_vertical_gradient(i)
[1]	1269	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1270
[167]	1271	WRITE (coor_chr,'(I6,1X)') vg_vertical_gradient_level_ind(i)
[1]	1272	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1273
[167]	1274	WRITE (coor_chr,'(F6.1,1X)') vg_vertical_gradient_level(i)
[1]	1275	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1276
[430]	1277	IF ( i == 10 ) THEN
	1278	EXIT
	1279	ELSE
	1280	i = i + 1
	1281	ENDIF
	1282
[1]	1283	ENDDO
	1284
	1285	WRITE ( io, 424 ) TRIM( coordinates ), TRIM( vgcomponent ), &
	1286	TRIM( gradients ), TRIM( slices )
	1287
	1288	!
	1289	!-- Initial temperature profile
	1290	!-- Building output strings, starting with surface temperature
	1291	WRITE ( temperatures, '(F6.2)' ) pt_surface
	1292	gradients = '------'
	1293	slices = ' 0'
	1294	coordinates = ' 0.0'
	1295	i = 1
	1296	DO WHILE ( pt_vertical_gradient_level_ind(i) /= -9999 )
	1297
[430]	1298	print*, 'i=',i,' level_pt=',pt_vertical_gradient_level_ind(i)
[94]	1299	WRITE (coor_chr,'(F7.2)') pt_init(pt_vertical_gradient_level_ind(i))
	1300	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
[1]	1301
[94]	1302	WRITE (coor_chr,'(F7.2)') pt_vertical_gradient(i)
	1303	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
[1]	1304
[94]	1305	WRITE (coor_chr,'(I7)') pt_vertical_gradient_level_ind(i)
	1306	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
[1]	1307
[94]	1308	WRITE (coor_chr,'(F7.1)') pt_vertical_gradient_level(i)
	1309	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
[1]	1310
[430]	1311	IF ( i == 10 ) THEN
	1312	EXIT
	1313	ELSE
	1314	i = i + 1
	1315	ENDIF
	1316
[1]	1317	ENDDO
	1318
	1319	WRITE ( io, 420 ) TRIM( coordinates ), TRIM( temperatures ), &
	1320	TRIM( gradients ), TRIM( slices )
	1321
	1322	!
	1323	!-- Initial humidity profile
	1324	!-- Building output strings, starting with surface humidity
[75]	1325	IF ( humidity .OR. passive_scalar ) THEN
[1]	1326	WRITE ( temperatures, '(E8.1)' ) q_surface
	1327	gradients = '--------'
	1328	slices = ' 0'
	1329	coordinates = ' 0.0'
	1330	i = 1
	1331	DO WHILE ( q_vertical_gradient_level_ind(i) /= -9999 )
	1332
	1333	WRITE (coor_chr,'(E8.1,4X)') q_init(q_vertical_gradient_level_ind(i))
	1334	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1335
	1336	WRITE (coor_chr,'(E8.1,4X)') q_vertical_gradient(i)
	1337	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1338
	1339	WRITE (coor_chr,'(I8,4X)') q_vertical_gradient_level_ind(i)
	1340	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1341
	1342	WRITE (coor_chr,'(F8.1,4X)') q_vertical_gradient_level(i)
	1343	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1344
[430]	1345	IF ( i == 10 ) THEN
	1346	EXIT
	1347	ELSE
	1348	i = i + 1
	1349	ENDIF
	1350
[1]	1351	ENDDO
	1352
[75]	1353	IF ( humidity ) THEN
[1]	1354	WRITE ( io, 421 ) TRIM( coordinates ), TRIM( temperatures ), &
	1355	TRIM( gradients ), TRIM( slices )
	1356	ELSE
	1357	WRITE ( io, 422 ) TRIM( coordinates ), TRIM( temperatures ), &
	1358	TRIM( gradients ), TRIM( slices )
	1359	ENDIF
	1360	ENDIF
	1361
	1362	!
[97]	1363	!-- Initial salinity profile
	1364	!-- Building output strings, starting with surface salinity
	1365	IF ( ocean ) THEN
	1366	WRITE ( temperatures, '(F6.2)' ) sa_surface
	1367	gradients = '------'
	1368	slices = ' 0'
	1369	coordinates = ' 0.0'
	1370	i = 1
	1371	DO WHILE ( sa_vertical_gradient_level_ind(i) /= -9999 )
	1372
	1373	WRITE (coor_chr,'(F7.2)') sa_init(sa_vertical_gradient_level_ind(i))
	1374	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1375
	1376	WRITE (coor_chr,'(F7.2)') sa_vertical_gradient(i)
	1377	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1378
	1379	WRITE (coor_chr,'(I7)') sa_vertical_gradient_level_ind(i)
	1380	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1381
	1382	WRITE (coor_chr,'(F7.1)') sa_vertical_gradient_level(i)
	1383	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1384
[430]	1385	IF ( i == 10 ) THEN
	1386	EXIT
	1387	ELSE
	1388	i = i + 1
	1389	ENDIF
	1390
[97]	1391	ENDDO
	1392
	1393	WRITE ( io, 425 ) TRIM( coordinates ), TRIM( temperatures ), &
	1394	TRIM( gradients ), TRIM( slices )
	1395	ENDIF
	1396
	1397	!
[411]	1398	!-- Profile for the large scale vertial velocity
	1399	!-- Building output strings, starting with surface value
	1400	IF ( large_scale_subsidence ) THEN
	1401	temperatures = ' 0.0'
	1402	gradients = '------'
	1403	slices = ' 0'
	1404	coordinates = ' 0.0'
	1405	i = 1
	1406	DO WHILE ( ws_vertical_gradient_level_ind(i) /= -9999 )
	1407
	1408	WRITE (coor_chr,'(E10.2,7X)') &
	1409	w_subs(ws_vertical_gradient_level_ind(i))
	1410	temperatures = TRIM( temperatures ) // ' ' // TRIM( coor_chr )
	1411
	1412	WRITE (coor_chr,'(E10.2,7X)') ws_vertical_gradient(i)
	1413	gradients = TRIM( gradients ) // ' ' // TRIM( coor_chr )
	1414
	1415	WRITE (coor_chr,'(I10,7X)') ws_vertical_gradient_level_ind(i)
	1416	slices = TRIM( slices ) // ' ' // TRIM( coor_chr )
	1417
	1418	WRITE (coor_chr,'(F10.2,7X)') ws_vertical_gradient_level(i)
	1419	coordinates = TRIM( coordinates ) // ' ' // TRIM( coor_chr )
	1420
[430]	1421	IF ( i == 10 ) THEN
	1422	EXIT
	1423	ELSE
	1424	i = i + 1
	1425	ENDIF
	1426
[411]	1427	ENDDO
	1428
	1429	WRITE ( io, 426 ) TRIM( coordinates ), TRIM( temperatures ), &
	1430	TRIM( gradients ), TRIM( slices )
	1431	ENDIF
	1432
	1433	!
[1]	1434	!-- LES / turbulence parameters
	1435	WRITE ( io, 450 )
	1436
	1437	!--
	1438	! ... LES-constants used must still be added here
	1439	!--
	1440	IF ( constant_diffusion ) THEN
	1441	WRITE ( io, 451 ) km_constant, km_constant/prandtl_number, &
	1442	prandtl_number
	1443	ENDIF
	1444	IF ( .NOT. constant_diffusion) THEN
[108]	1445	IF ( e_init > 0.0 ) WRITE ( io, 455 ) e_init
[1]	1446	IF ( e_min > 0.0 ) WRITE ( io, 454 ) e_min
	1447	IF ( wall_adjustment ) WRITE ( io, 453 ) wall_adjustment_factor
	1448	IF ( adjust_mixing_length .AND. prandtl_layer ) WRITE ( io, 452 )
	1449	ENDIF
	1450
	1451	!
	1452	!-- Special actions during the run
	1453	WRITE ( io, 470 )
	1454	IF ( create_disturbances ) THEN
	1455	WRITE ( io, 471 ) dt_disturb, disturbance_amplitude, &
	1456	zu(disturbance_level_ind_b), disturbance_level_ind_b,&
	1457	zu(disturbance_level_ind_t), disturbance_level_ind_t
	1458	IF ( bc_lr /= 'cyclic' .OR. bc_ns /= 'cyclic' ) THEN
	1459	WRITE ( io, 472 ) inflow_disturbance_begin, inflow_disturbance_end
	1460	ELSE
	1461	WRITE ( io, 473 ) disturbance_energy_limit
	1462	ENDIF
	1463	WRITE ( io, 474 ) TRIM( random_generator )
	1464	ENDIF
	1465	IF ( pt_surface_initial_change /= 0.0 ) THEN
	1466	WRITE ( io, 475 ) pt_surface_initial_change
	1467	ENDIF
[75]	1468	IF ( humidity .AND. q_surface_initial_change /= 0.0 ) THEN
[1]	1469	WRITE ( io, 476 ) q_surface_initial_change
	1470	ENDIF
	1471	IF ( passive_scalar .AND. q_surface_initial_change /= 0.0 ) THEN
	1472	WRITE ( io, 477 ) q_surface_initial_change
	1473	ENDIF
	1474
[60]	1475	IF ( particle_advection ) THEN
[1]	1476	!
[60]	1477	!-- Particle attributes
	1478	WRITE ( io, 480 ) particle_advection_start, dt_prel, bc_par_lr, &
	1479	bc_par_ns, bc_par_b, bc_par_t, particle_maximum_age, &
[117]	1480	end_time_prel, dt_sort_particles
[60]	1481	IF ( use_sgs_for_particles ) WRITE ( io, 488 ) dt_min_part
	1482	IF ( random_start_position ) WRITE ( io, 481 )
	1483	IF ( particles_per_point > 1 ) WRITE ( io, 489 ) particles_per_point
	1484	WRITE ( io, 495 ) total_number_of_particles
	1485	IF ( maximum_number_of_tailpoints /= 0 ) THEN
	1486	WRITE ( io, 483 ) maximum_number_of_tailpoints
	1487	IF ( minimum_tailpoint_distance /= 0 ) THEN
	1488	WRITE ( io, 484 ) total_number_of_tails, &
	1489	minimum_tailpoint_distance, &
	1490	maximum_tailpoint_age
	1491	ENDIF
[1]	1492	ENDIF
[60]	1493	IF ( dt_write_particle_data /= 9999999.9 ) THEN
	1494	WRITE ( io, 485 ) dt_write_particle_data
	1495	output_format = ''
	1496	IF ( netcdf_output ) THEN
	1497	IF ( netcdf_64bit ) THEN
	1498	output_format = 'netcdf (64 bit offset) and binary'
	1499	ELSE
	1500	output_format = 'netcdf and binary'
	1501	ENDIF
[1]	1502	ELSE
[60]	1503	output_format = 'binary'
[1]	1504	ENDIF
[292]	1505	WRITE ( io, 344 ) output_format
[1]	1506	ENDIF
[60]	1507	IF ( dt_dopts /= 9999999.9 ) WRITE ( io, 494 ) dt_dopts
	1508	IF ( write_particle_statistics ) WRITE ( io, 486 )
[1]	1509
[60]	1510	WRITE ( io, 487 ) number_of_particle_groups
[1]	1511
[60]	1512	DO i = 1, number_of_particle_groups
	1513	IF ( i == 1 .AND. density_ratio(i) == 9999999.9 ) THEN
	1514	WRITE ( io, 490 ) i, 0.0
	1515	WRITE ( io, 492 )
[1]	1516	ELSE
[60]	1517	WRITE ( io, 490 ) i, radius(i)
	1518	IF ( density_ratio(i) /= 0.0 ) THEN
	1519	WRITE ( io, 491 ) density_ratio(i)
	1520	ELSE
	1521	WRITE ( io, 492 )
	1522	ENDIF
[1]	1523	ENDIF
[60]	1524	WRITE ( io, 493 ) psl(i), psr(i), pss(i), psn(i), psb(i), pst(i), &
	1525	pdx(i), pdy(i), pdz(i)
[336]	1526	IF ( .NOT. vertical_particle_advection(i) ) WRITE ( io, 482 )
[60]	1527	ENDDO
[1]	1528
[60]	1529	ENDIF
[1]	1530
[60]	1531
[1]	1532	!
	1533	!-- Parameters of 1D-model
	1534	IF ( INDEX( initializing_actions, 'set_1d-model_profiles' ) /= 0 ) THEN
	1535	WRITE ( io, 500 ) end_time_1d, dt_run_control_1d, dt_pr_1d, &
	1536	mixing_length_1d, dissipation_1d
	1537	IF ( damp_level_ind_1d /= nzt+1 ) THEN
	1538	WRITE ( io, 502 ) zu(damp_level_ind_1d), damp_level_ind_1d
	1539	ENDIF
	1540	ENDIF
	1541
	1542	!
	1543	!-- User-defined informations
	1544	CALL user_header( io )
	1545
	1546	WRITE ( io, 99 )
	1547
	1548	!
	1549	!-- Write buffer contents to disc immediately
[82]	1550	CALL local_flush( io )
[1]	1551
	1552	!
	1553	!-- Here the FORMATs start
	1554
	1555	99 FORMAT (1X,78('-'))
[200]	1556	100 FORMAT (/1X,'***************************',9X,42('-')/ &
	1557	1X,'* ',A,' *',9X,A/ &
	1558	1X,'***************************',9X,42('-'))
[291]	1559	101 FORMAT (37X,'coupled run using MPI-',I1,': ',A/ &
[102]	1560	37X,42('-'))
[200]	1561	102 FORMAT (/' Date: ',A8,9X,'Run: ',A20/ &
	1562	' Time: ',A8,9X,'Run-No.: ',I2.2/ &
	1563	' Run on host: ',A10)
[1]	1564	#if defined( __parallel )
[200]	1565	103 FORMAT (' Number of PEs:',8X,I5,9X,'Processor grid (x,y): (',I3,',',I3, &
[1]	1566	')',1X,A)
[200]	1567	104 FORMAT (' Number of PEs:',8X,I5,9X,'Tasks:',I4,' threads per task:',I4/ &
[1]	1568	37X,'Processor grid (x,y): (',I3,',',I3,')',1X,A)
[102]	1569	105 FORMAT (37X,'One additional PE is used to handle'/37X,'the dvrp output!')
	1570	106 FORMAT (37X,'A 1d-decomposition along x is forced'/ &
[1]	1571	37X,'because the job is running on an SMP-cluster')
[102]	1572	107 FORMAT (37X,'A 1d-decomposition along ',A,' is used')
[1]	1573	#endif
	1574	110 FORMAT (/' Numerical Schemes:'/ &
	1575	' -----------------'/)
	1576	111 FORMAT (' --> Solve perturbation pressure via FFT using ',A,' routines')
	1577	112 FORMAT (' --> Solve perturbation pressure via SOR-Red/Black-Schema'/ &
	1578	' Iterations (initial/other): ',I3,'/',I3,' omega = ',F5.3)
	1579	113 FORMAT (' --> Momentum advection via Piascek-Williams-Scheme (Form C3)', &
	1580	' or Upstream')
	1581	114 FORMAT (' --> Momentum advection via Upstream-Spline-Scheme')
	1582	115 FORMAT (' Tendencies are smoothed via Long-Filter with factor ',F5.3)
	1583	116 FORMAT (' --> Scalar advection via Piascek-Williams-Scheme (Form C3)', &
	1584	' or Upstream')
	1585	117 FORMAT (' --> Scalar advection via Upstream-Spline-Scheme')
	1586	118 FORMAT (' --> Scalar advection via Bott-Chlond-Scheme')
	1587	119 FORMAT (' --> Galilei-Transform applied to horizontal advection', &
	1588	' Translation velocity = ',A/ &
	1589	' distance advected ',A,': ',F8.3,' km(x) ',F8.3,' km(y)')
	1590	120 FORMAT (' --> Time differencing scheme: leapfrog only (no euler in case', &
	1591	' of timestep changes)')
	1592	121 FORMAT (' --> Time differencing scheme: leapfrog + euler in case of', &
	1593	' timestep changes')
	1594	122 FORMAT (' --> Time differencing scheme: ',A)
[108]	1595	123 FORMAT (' --> Rayleigh-Damping active, starts ',A,' z = ',F8.2,' m'/ &
[1]	1596	' maximum damping coefficient: ',F5.3, ' 1/s')
	1597	124 FORMAT (' Spline-overshoots are being suppressed')
	1598	125 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1599	' of'/ &
	1600	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1601	126 FORMAT (' Upstream-Scheme is used if Upstream-differences fall short', &
	1602	' of'/ &
	1603	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1604	127 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1605	' delta_u = ',F6.4,4X,'delta_v = ',F6.4,4X,'delta_w = ',F6.4)
	1606	128 FORMAT (' The following absolute overshoot differences are tolerated:'/&
	1607	' delta_e = ',F6.4,4X,'delta_pt = ',F6.4)
	1608	129 FORMAT (' --> Additional prognostic equation for the specific humidity')
	1609	130 FORMAT (' --> Additional prognostic equation for the total water content')
	1610	131 FORMAT (' --> Parameterization of condensation processes via (0%-or100%)')
	1611	132 FORMAT (' --> Parameterization of long-wave radiation processes via'/ &
	1612	' effective emissivity scheme')
	1613	133 FORMAT (' --> Precipitation parameterization via Kessler-Scheme')
	1614	134 FORMAT (' --> Additional prognostic equation for a passive scalar')
	1615	135 FORMAT (' --> Solve perturbation pressure via multigrid method (', &
	1616	A,'-cycle)'/ &
	1617	' number of grid levels: ',I2/ &
	1618	' Gauss-Seidel red/black iterations: ',I2)
	1619	136 FORMAT (' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1620	I3,')')
	1621	137 FORMAT (' level data gathered on PE0 at level: ',I2/ &
	1622	' gridpoints of coarsest subdomain (x,y,z): (',I3,',',I3,',', &
	1623	I3,')'/ &
	1624	' gridpoints of coarsest domain (x,y,z): (',I3,',',I3,',', &
	1625	I3,')')
	1626	138 FORMAT (' Using hybrid version for 1d-domain-decomposition')
[63]	1627	139 FORMAT (' --> Loop optimization method: ',A)
[1]	1628	140 FORMAT (' maximum residual allowed: ',E10.3)
	1629	141 FORMAT (' fixed number of multigrid cycles: ',I4)
	1630	142 FORMAT (' perturbation pressure is calculated at every Runge-Kutta ', &
	1631	'step')
[87]	1632	143 FORMAT (' Euler/upstream scheme is used for the SGS turbulent ', &
	1633	'kinetic energy')
[1]	1634	150 FORMAT (' --> Volume flow at the right and north boundary will be ', &
[241]	1635	'conserved'/ &
	1636	' using the ',A,' mode')
	1637	151 FORMAT (' with u_bulk = ',F7.3,' m/s and v_bulk = ',F7.3,' m/s')
[306]	1638	152 FORMAT (' --> External pressure gradient directly prescribed by the user:',&
	1639	/' ',2(1X,E12.5),'Pa/m in x/y direction', &
	1640	/' starting from dp_level_b =', F8.3, 'm', A /)
[411]	1641	153 FORMAT (' --> Large-scale vertical motion is used in the ', &
	1642	'prognostic equation for')
	1643	154 FORMAT (' the potential temperature')
[1]	1644	200 FORMAT (//' Run time and time step information:'/ &
	1645	' ----------------------------------'/)
	1646	201 FORMAT ( ' Timestep: variable maximum value: ',F6.3,' s', &
	1647	' CFL-factor: ',F4.2)
	1648	202 FORMAT ( ' Timestep: dt = ',F6.3,' s'/)
	1649	203 FORMAT ( ' Start time: ',F9.3,' s'/ &
	1650	' End time: ',F9.3,' s')
	1651	204 FORMAT ( A,F9.3,' s')
	1652	205 FORMAT ( A,F9.3,' s',5X,'restart every',17X,F9.3,' s')
	1653	206 FORMAT (/' Time reached: ',F9.3,' s'/ &
	1654	' CPU-time used: ',F9.3,' s per timestep: ', &
	1655	' ',F9.3,' s'/ &
	1656	' per second of simulated tim', &
	1657	'e: ',F9.3,' s')
[291]	1658	207 FORMAT ( A/' Coupling start time:',F9.3,' s')
[1]	1659	250 FORMAT (//' Computational grid and domain size:'/ &
	1660	' ----------------------------------'// &
	1661	' Grid length: dx = ',F7.3,' m dy = ',F7.3, &
	1662	' m dz = ',F7.3,' m'/ &
	1663	' Domain size: x = ',F10.3,' m y = ',F10.3, &
	1664	' m z(u) = ',F10.3,' m'/)
	1665	252 FORMAT (' dz constant up to ',F10.3,' m (k=',I4,'), then stretched by', &
	1666	' factor: ',F5.3/ &
	1667	' maximum dz not to be exceeded is dz_max = ',F10.3,' m'/)
	1668	254 FORMAT (' Number of gridpoints (x,y,z): (0:',I4,', 0:',I4,', 0:',I4,')'/ &
	1669	' Subdomain size (x,y,z): ( ',I4,', ',I4,', ',I4,')'/)
	1670	255 FORMAT (' Subdomains have equal size')
	1671	256 FORMAT (' Subdomains at the upper edges of the virtual processor grid ', &
	1672	'have smaller sizes'/ &
	1673	' Size of smallest subdomain: ( ',I4,', ',I4,', ',I4,')')
	1674	260 FORMAT (/' The model has a slope in x-direction. Inclination angle: ',F6.2,&
	1675	' degrees')
	1676	270 FORMAT (//' Topography informations:'/ &
	1677	' -----------------------'// &
	1678	1X,'Topography: ',A)
	1679	271 FORMAT ( ' Building size (x/y/z) in m: ',F5.1,' / ',F5.1,' / ',F5.1/ &
	1680	' Horizontal index bounds (l/r/s/n): ',I4,' / ',I4,' / ',I4, &
	1681	' / ',I4)
[240]	1682	272 FORMAT ( ' Single quasi-2D street canyon of infinite length in ',A, &
	1683	' direction' / &
	1684	' Canyon height: ', F6.2, 'm, ch = ', I4, '.' / &
	1685	' Canyon position (',A,'-walls): cxl = ', I4,', cxr = ', I4, '.')
[256]	1686	278 FORMAT (' Topography grid definition convention:'/ &
	1687	' cell edge (staggered grid points'/ &
	1688	' (u in x-direction, v in y-direction))' /)
	1689	279 FORMAT (' Topography grid definition convention:'/ &
	1690	' cell center (scalar grid points)' /)
[138]	1691	280 FORMAT (//' Vegetation canopy (drag) model:'/ &
	1692	' ------------------------------'// &
	1693	' Canopy mode: ', A / &
	1694	' Canopy top: ',I4 / &
	1695	' Leaf drag coefficient: ',F6.2 /)
[153]	1696	281 FORMAT (/ ' Scalar_exchange_coefficient: ',F6.2 / &
	1697	' Scalar concentration at leaf surfaces in kg/m**3: ',F6.2 /)
	1698	282 FORMAT (' Predefined constant heatflux at the top of the vegetation: ',F6.2,' K m/s')
	1699	283 FORMAT (/ ' Characteristic levels of the leaf area density:'// &
[138]	1700	' Height: ',A,' m'/ &
	1701	' Leaf area density: ',A,' m2/m3'/ &
	1702	' Gradient: ',A,' m2/m4'/ &
	1703	' Gridpoint: ',A)
	1704
[1]	1705	300 FORMAT (//' Boundary conditions:'/ &
	1706	' -------------------'// &
	1707	' p uv ', &
	1708	' pt'// &
	1709	' B. bound.: ',A/ &
	1710	' T. bound.: ',A)
[97]	1711	301 FORMAT (/' ',A// &
[1]	1712	' B. bound.: ',A/ &
	1713	' T. bound.: ',A)
[19]	1714	303 FORMAT (/' Bottom surface fluxes are used in diffusion terms at k=1')
	1715	304 FORMAT (/' Top surface fluxes are used in diffusion terms at k=nzt')
	1716	305 FORMAT (//' Prandtl-Layer between bottom surface and first ', &
	1717	'computational u,v-level:'// &
[1]	1718	' zp = ',F6.2,' m z0 = ',F6.4,' m kappa = ',F4.2/ &
	1719	' Rif value range: ',F6.2,' <= rif <=',F6.2)
[97]	1720	306 FORMAT (' Predefined constant heatflux: ',F9.6,' K m/s')
[1]	1721	307 FORMAT (' Heatflux has a random normal distribution')
	1722	308 FORMAT (' Predefined surface temperature')
[97]	1723	309 FORMAT (' Predefined constant salinityflux: ',F9.6,' psu m/s')
[1]	1724	310 FORMAT (//' 1D-Model:'// &
	1725	' Rif value range: ',F6.2,' <= rif <=',F6.2)
	1726	311 FORMAT (' Predefined constant humidity flux: ',E10.3,' m/s')
	1727	312 FORMAT (' Predefined surface humidity')
	1728	313 FORMAT (' Predefined constant scalar flux: ',E10.3,' kg/(m**2 s)')
	1729	314 FORMAT (' Predefined scalar value at the surface')
[19]	1730	315 FORMAT (' Humidity / scalar flux at top surface is 0.0')
[102]	1731	316 FORMAT (' Sensible heatflux and momentum flux from coupled ', &
	1732	'atmosphere model')
[1]	1733	317 FORMAT (//' Lateral boundaries:'/ &
	1734	' left/right: ',A/ &
	1735	' north/south: ',A)
	1736	318 FORMAT (/' outflow damping layer width: ',I3,' gridpoints with km_', &
	1737	'max =',F5.1,' m**2/s')
[151]	1738	319 FORMAT (' turbulence recycling at inflow switched on'/ &
	1739	' width of recycling domain: ',F7.1,' m grid index: ',I4/ &
	1740	' inflow damping height: ',F6.1,' m width: ',F6.1,' m')
	1741	320 FORMAT (' Predefined constant momentumflux: u: ',F9.6,' m2/s2'/ &
[103]	1742	' v: ',F9.6,' m2/s2')
[151]	1743	325 FORMAT (//' List output:'/ &
[1]	1744	' -----------'// &
	1745	' 1D-Profiles:'/ &
	1746	' Output every ',F8.2,' s')
[151]	1747	326 FORMAT (' Time averaged over ',F8.2,' s'/ &
[1]	1748	' Averaging input every ',F8.2,' s')
	1749	330 FORMAT (//' Data output:'/ &
	1750	' -----------'/)
	1751	331 FORMAT (/' 1D-Profiles:')
	1752	332 FORMAT (/' ',A)
	1753	333 FORMAT (' Output every ',F8.2,' s',/ &
	1754	' Time averaged over ',F8.2,' s'/ &
	1755	' Averaging input every ',F8.2,' s')
	1756	334 FORMAT (/' 2D-Arrays',A,':')
	1757	335 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1758	' Output every ',F8.2,' s ',A/ &
	1759	' Cross sections at ',A1,' = ',A/ &
	1760	' scalar-coordinates: ',A,' m'/)
	1761	336 FORMAT (/' 3D-Arrays',A,':')
	1762	337 FORMAT (/' Arrays: ',A/ &
	1763	' Output every ',F8.2,' s ',A/ &
	1764	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
	1765	338 FORMAT (' Compressed data output'/ &
	1766	' Decimal precision: ',A/)
	1767	339 FORMAT (' No output during initial ',F8.2,' s')
	1768	340 FORMAT (/' Time series:')
	1769	341 FORMAT (' Output every ',F8.2,' s'/)
	1770	342 FORMAT (/' ',A2,'-cross-section Arrays: ',A/ &
	1771	' Output every ',F8.2,' s ',A/ &
	1772	' Time averaged over ',F8.2,' s'/ &
	1773	' Averaging input every ',F8.2,' s'/ &
	1774	' Cross sections at ',A1,' = ',A/ &
	1775	' scalar-coordinates: ',A,' m'/)
	1776	343 FORMAT (/' Arrays: ',A/ &
	1777	' Output every ',F8.2,' s ',A/ &
	1778	' Time averaged over ',F8.2,' s'/ &
	1779	' Averaging input every ',F8.2,' s'/ &
	1780	' Upper output limit at ',F8.2,' m (GP ',I4,')'/)
[292]	1781	344 FORMAT (' Output format: ',A/)
[410]	1782	345 FORMAT (/' Scaling lengths for output locations of all subsequent mask IDs:',/ &
	1783	' mask_scale_x (in x-direction): ',F9.3, ' m',/ &
	1784	' mask_scale_y (in y-direction): ',F9.3, ' m',/ &
	1785	' mask_scale_z (in z-direction): ',F9.3, ' m' )
	1786	346 FORMAT (/' Masked data output',A,' for mask ID ',I2, ':')
	1787	347 FORMAT (' Variables: ',A/ &
	1788	' Output every ',F8.2,' s')
	1789	348 FORMAT (' Variables: ',A/ &
	1790	' Output every ',F8.2,' s'/ &
	1791	' Time averaged over ',F8.2,' s'/ &
	1792	' Averaging input every ',F8.2,' s')
	1793	349 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1794	'mask_scale_',A,' predefined by array mask_',I2.2,'_',A,':'/ &
	1795	13(' ',8(F8.2,',')/) )
	1796	350 FORMAT (/' Output locations in ',A,'-direction: ', &
	1797	'all gridpoints along ',A,'-direction (default).' )
	1798	351 FORMAT (/' Output locations in ',A,'-direction in multiples of ', &
	1799	'mask_scale_',A,' constructed from array mask_',I2.2,'_',A,'_loop:'/ &
	1800	' loop begin:',F8.2,', end:',F8.2,', stride:',F8.2 )
[1]	1801	#if defined( __dvrp_graphics )
	1802	360 FORMAT (' Plot-Sequence with dvrp-software:'/ &
	1803	' Output every ',F7.1,' s'/ &
	1804	' Output mode: ',A/ &
	1805	' Host / User: ',A,' / ',A/ &
	1806	' Directory: ',A// &
	1807	' The sequence contains:')
[337]	1808	361 FORMAT (/' Isosurface of "',A,'" Threshold value: ', E12.3/ &
	1809	' Isosurface color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
	1810	362 FORMAT (/' Slicer plane ',A/ &
[336]	1811	' Slicer limits: [',F6.2,',',F6.2,']')
[337]	1812	363 FORMAT (/' Particles'/ &
[336]	1813	' particle size: ',F7.2,' m')
	1814	364 FORMAT (' particle ',A,' controlled by "',A,'" with interval [', &
	1815	F6.2,',',F6.2,']')
[337]	1816	365 FORMAT (/' Groundplate color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)'/ &
[336]	1817	' Superelevation along (x,y,z): (',F4.1,',',F4.1,',',F4.1, &
	1818	')'/ &
	1819	' Clipping limits: from x = ',F9.1,' m to x = ',F9.1,' m'/ &
	1820	' from y = ',F9.1,' m to y = ',F9.1,' m')
[337]	1821	366 FORMAT (/' Topography color: (',F4.2,',',F4.2,',',F4.2,') (R,G,B)')
[336]	1822	367 FORMAT (' Polygon reduction for topography: cluster_size = ', I1)
[1]	1823	#endif
	1824	#if defined( __spectra )
	1825	370 FORMAT (' Spectra:')
	1826	371 FORMAT (' Output every ',F7.1,' s'/)
	1827	372 FORMAT (' Arrays: ', 10(A5,',')/ &
	1828	' Directions: ', 10(A5,',')/ &
[189]	1829	' height levels k = ', 20(I3,',')/ &
	1830	' ', 20(I3,',')/ &
	1831	' ', 20(I3,',')/ &
	1832	' ', 20(I3,',')/ &
	1833	' ', 19(I3,','),I3,'.'/ &
[1]	1834	' height levels selected for standard plot:'/ &
[189]	1835	' k = ', 20(I3,',')/ &
	1836	' ', 20(I3,',')/ &
	1837	' ', 20(I3,',')/ &
	1838	' ', 20(I3,',')/ &
	1839	' ', 19(I3,','),I3,'.'/ &
[1]	1840	' Time averaged over ', F7.1, ' s,' / &
	1841	' Profiles for the time averaging are taken every ', &
	1842	F6.1,' s')
	1843	#endif
	1844	400 FORMAT (//' Physical quantities:'/ &
	1845	' -------------------'/)
	1846	410 FORMAT (' Angular velocity : omega = ',E9.3,' rad/s'/ &
	1847	' Geograph. latitude : phi = ',F4.1,' degr'/ &
	1848	' Coriolis parameter : f = ',F9.6,' 1/s'/ &
	1849	' f* = ',F9.6,' 1/s')
	1850	411 FORMAT (/' Gravity : g = ',F4.1,' m/s**2')
[97]	1851	412 FORMAT (/' Reference density in buoyancy terms: ',F8.3,' kg/m**3')
	1852	413 FORMAT (/' Reference temperature in buoyancy terms: ',F8.4,' K')
[57]	1853	415 FORMAT (/' Cloud physics parameters:'/ &
[1]	1854	' ------------------------'/)
[57]	1855	416 FORMAT (' Surface pressure : p_0 = ',F7.2,' hPa'/ &
[1]	1856	' Gas constant : R = ',F5.1,' J/(kg K)'/ &
	1857	' Density of air : rho_0 = ',F5.3,' kg/m**3'/ &
	1858	' Specific heat cap. : c_p = ',F6.1,' J/(kg K)'/ &
	1859	' Vapourization heat : L_v = ',E8.2,' J/kg')
	1860	420 FORMAT (/' Characteristic levels of the initial temperature profile:'// &
	1861	' Height: ',A,' m'/ &
	1862	' Temperature: ',A,' K'/ &
	1863	' Gradient: ',A,' K/100m'/ &
	1864	' Gridpoint: ',A)
	1865	421 FORMAT (/' Characteristic levels of the initial humidity profile:'// &
	1866	' Height: ',A,' m'/ &
	1867	' Humidity: ',A,' kg/kg'/ &
	1868	' Gradient: ',A,' (kg/kg)/100m'/ &
	1869	' Gridpoint: ',A)
	1870	422 FORMAT (/' Characteristic levels of the initial scalar profile:'// &
	1871	' Height: ',A,' m'/ &
	1872	' Scalar concentration: ',A,' kg/m**3'/ &
	1873	' Gradient: ',A,' (kg/m**3)/100m'/ &
	1874	' Gridpoint: ',A)
	1875	423 FORMAT (/' Characteristic levels of the geo. wind component ug:'// &
	1876	' Height: ',A,' m'/ &
	1877	' ug: ',A,' m/s'/ &
	1878	' Gradient: ',A,' 1/100s'/ &
	1879	' Gridpoint: ',A)
	1880	424 FORMAT (/' Characteristic levels of the geo. wind component vg:'// &
	1881	' Height: ',A,' m'/ &
[97]	1882	' vg: ',A,' m/s'/ &
[1]	1883	' Gradient: ',A,' 1/100s'/ &
	1884	' Gridpoint: ',A)
[97]	1885	425 FORMAT (/' Characteristic levels of the initial salinity profile:'// &
	1886	' Height: ',A,' m'/ &
	1887	' Salinity: ',A,' psu'/ &
	1888	' Gradient: ',A,' psu/100m'/ &
	1889	' Gridpoint: ',A)
[411]	1890	426 FORMAT (/' Characteristic levels of the subsidence/ascent profile:'// &
	1891	' Height: ',A,' m'/ &
	1892	' w_subs: ',A,' m/s'/ &
	1893	' Gradient: ',A,' (m/s)/100m'/ &
	1894	' Gridpoint: ',A)
[1]	1895	450 FORMAT (//' LES / Turbulence quantities:'/ &
	1896	' ---------------------------'/)
	1897	451 FORMAT (' Diffusion coefficients are constant:'/ &
	1898	' Km = ',F6.2,' m2/s Kh = ',F6.2,' m2/s Pr = ',F5.2)
	1899	452 FORMAT (' Mixing length is limited to the Prandtl mixing lenth.')
	1900	453 FORMAT (' Mixing length is limited to ',F4.2,' * z')
	1901	454 FORMAT (' TKE is not allowed to fall below ',E9.2,' (m/s)**2')
[108]	1902	455 FORMAT (' initial TKE is prescribed as ',E9.2,' (m/s)**2')
[1]	1903	470 FORMAT (//' Actions during the simulation:'/ &
	1904	' -----------------------------'/)
[94]	1905	471 FORMAT (' Disturbance impulse (u,v) every : ',F6.2,' s'/ &
	1906	' Disturbance amplitude : ',F4.2, ' m/s'/ &
	1907	' Lower disturbance level : ',F8.2,' m (GP ',I4,')'/ &
	1908	' Upper disturbance level : ',F8.2,' m (GP ',I4,')')
[1]	1909	472 FORMAT (' Disturbances continued during the run from i/j =',I4, &
	1910	' to i/j =',I4)
	1911	473 FORMAT (' Disturbances cease as soon as the disturbance energy exceeds',&
	1912	1X,F5.3, ' m2/s2')
	1913	474 FORMAT (' Random number generator used : ',A/)
	1914	475 FORMAT (' The surface temperature is increased (or decreased, ', &
	1915	'respectively, if'/ &
	1916	' the value is negative) by ',F5.2,' K at the beginning of the',&
	1917	' 3D-simulation'/)
	1918	476 FORMAT (' The surface humidity is increased (or decreased, ',&
	1919	'respectively, if the'/ &
	1920	' value is negative) by ',E8.1,' kg/kg at the beginning of', &
	1921	' the 3D-simulation'/)
	1922	477 FORMAT (' The scalar value is increased at the surface (or decreased, ',&
	1923	'respectively, if the'/ &
	1924	' value is negative) by ',E8.1,' kg/m**3 at the beginning of', &
	1925	' the 3D-simulation'/)
	1926	480 FORMAT (' Particles:'/ &
	1927	' ---------'// &
	1928	' Particle advection is active (switched on at t = ', F7.1, &
	1929	' s)'/ &
	1930	' Start of new particle generations every ',F6.1,' s'/ &
	1931	' Boundary conditions: left/right: ', A, ' north/south: ', A/&
	1932	' bottom: ', A, ' top: ', A/&
	1933	' Maximum particle age: ',F9.1,' s'/ &
[117]	1934	' Advection stopped at t = ',F9.1,' s'/ &
	1935	' Particles are sorted every ',F9.1,' s'/)
[1]	1936	481 FORMAT (' Particles have random start positions'/)
[336]	1937	482 FORMAT (' Particles are advected only horizontally'/)
[1]	1938	483 FORMAT (' Particles have tails with a maximum of ',I3,' points')
	1939	484 FORMAT (' Number of tails of the total domain: ',I10/ &
	1940	' Minimum distance between tailpoints: ',F8.2,' m'/ &
	1941	' Maximum age of the end of the tail: ',F8.2,' s')
	1942	485 FORMAT (' Particle data are written on file every ', F9.1, ' s')
	1943	486 FORMAT (' Particle statistics are written on file'/)
	1944	487 FORMAT (' Number of particle groups: ',I2/)
	1945	488 FORMAT (' SGS velocity components are used for particle advection'/ &
	1946	' minimum timestep for advection: ', F7.5/)
	1947	489 FORMAT (' Number of particles simultaneously released at each ', &
	1948	'point: ', I5/)
	1949	490 FORMAT (' Particle group ',I2,':'/ &
	1950	' Particle radius: ',E10.3, 'm')
	1951	491 FORMAT (' Particle inertia is activated'/ &
	1952	' density_ratio (rho_fluid/rho_particle) = ',F5.3/)
	1953	492 FORMAT (' Particles are advected only passively (no inertia)'/)
	1954	493 FORMAT (' Boundaries of particle source: x:',F8.1,' - ',F8.1,' m'/&
	1955	' y:',F8.1,' - ',F8.1,' m'/&
	1956	' z:',F8.1,' - ',F8.1,' m'/&
	1957	' Particle distances: dx = ',F8.1,' m dy = ',F8.1, &
	1958	' m dz = ',F8.1,' m'/)
	1959	494 FORMAT (' Output of particle time series in NetCDF format every ', &
	1960	F8.2,' s'/)
	1961	495 FORMAT (' Number of particles in total domain: ',I10/)
	1962	500 FORMAT (//' 1D-Model parameters:'/ &
	1963	' -------------------'// &
	1964	' Simulation time: ',F8.1,' s'/ &
	1965	' Run-controll output every: ',F8.1,' s'/ &
	1966	' Vertical profile output every: ',F8.1,' s'/ &
	1967	' Mixing length calculation: ',A/ &
	1968	' Dissipation calculation: ',A/)
	1969	502 FORMAT (' Damping layer starts from ',F7.1,' m (GP ',I4,')'/)
	1970
	1971
	1972	END SUBROUTINE header

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

| Impressum | ©Leibniz Universität Hannover |